Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks
  OMAP2+: PM/serial: fix console semaphore acquire during suspend
  OMAP1: SRAM: fix size for OMAP1611 SoCs
  arm: omap2: io: fix clk_get() error check
  arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check
  omap: nand: remove hardware ECC as default
  omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD
  omap: PM debug: fix wake-on-timer debugfs dependency
This commit is contained in:
Linus Torvalds 2010-12-14 17:36:35 -08:00
commit ec5d043f28
9 changed files with 79 additions and 37 deletions

View file

@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{ {
.name = "wl1271", .name = "wl1271",
.mmc = 3, .mmc = 3,
.caps = MMC_CAP_4_BIT_DATA, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL, .gpio_wp = -EINVAL,
.gpio_cd = -EINVAL, .gpio_cd = -EINVAL,
.nonremovable = true, .nonremovable = true,

View file

@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
return 0; return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck"); dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
if (!dpll3_m2_ck) if (IS_ERR(dpll3_m2_ck))
return -EINVAL; return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck); rate = clk_get_rate(dpll3_m2_ck);

View file

@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
} }
void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
{
u32 tick_rate, cycles;
if (!seconds && !milliseconds)
return;
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
omap_dm_timer_stop(gptimer_wakeup);
omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
pr_info("PM: Resume timer in %u.%03u secs"
" (%d ticks at %d ticks/sec.)\n",
seconds, milliseconds, cycles, tick_rate);
}
#ifdef CONFIG_DEBUG_FS #ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h> #include <linux/debugfs.h>
#include <linux/seq_file.h> #include <linux/seq_file.h>
@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
pwrdm->timer = t; pwrdm->timer = t;
} }
void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
{
u32 tick_rate, cycles;
if (!seconds && !milliseconds)
return;
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
omap_dm_timer_stop(gptimer_wakeup);
omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
pr_info("PM: Resume timer in %u.%03u secs"
" (%d ticks at %d ticks/sec.)\n",
seconds, milliseconds, cycles, tick_rate);
}
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{ {
struct seq_file *s = (struct seq_file *)user; struct seq_file *s = (struct seq_file *)user;

View file

@ -53,6 +53,19 @@
#include <plat/powerdomain.h> #include <plat/powerdomain.h>
#include <plat/clockdomain.h> #include <plat/clockdomain.h>
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
return (suspend_state != PM_SUSPEND_ON);
}
#else
static inline bool is_suspending(void)
{
return false;
}
#endif
static void (*omap2_sram_idle)(void); static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power); void __iomem *sdrc_power);
@ -120,8 +133,9 @@ static void omap2_enter_full_retention(void)
goto no_sleep; goto no_sleep;
/* Block console output in case it is on one of the OMAP UARTs */ /* Block console output in case it is on one of the OMAP UARTs */
if (try_acquire_console_sem()) if (!is_suspending())
goto no_sleep; if (try_acquire_console_sem())
goto no_sleep;
omap_uart_prepare_idle(0); omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1); omap_uart_prepare_idle(1);
@ -136,7 +150,8 @@ static void omap2_enter_full_retention(void)
omap_uart_resume_idle(1); omap_uart_resume_idle(1);
omap_uart_resume_idle(0); omap_uart_resume_idle(0);
release_console_sem(); if (!is_suspending())
release_console_sem();
no_sleep: no_sleep:
if (omap2_pm_debug) { if (omap2_pm_debug) {
@ -284,6 +299,12 @@ static void omap2_pm_idle(void)
local_irq_enable(); local_irq_enable();
} }
static int omap2_pm_begin(suspend_state_t state)
{
suspend_state = state;
return 0;
}
static int omap2_pm_prepare(void) static int omap2_pm_prepare(void)
{ {
/* We cannot sleep in idle until we have resumed */ /* We cannot sleep in idle until we have resumed */
@ -333,10 +354,17 @@ static void omap2_pm_finish(void)
enable_hlt(); enable_hlt();
} }
static void omap2_pm_end(void)
{
suspend_state = PM_SUSPEND_ON;
}
static struct platform_suspend_ops omap_pm_ops = { static struct platform_suspend_ops omap_pm_ops = {
.begin = omap2_pm_begin,
.prepare = omap2_pm_prepare, .prepare = omap2_pm_prepare,
.enter = omap2_pm_enter, .enter = omap2_pm_enter,
.finish = omap2_pm_finish, .finish = omap2_pm_finish,
.end = omap2_pm_end,
.valid = suspend_valid_only_mem, .valid = suspend_valid_only_mem,
}; };

View file

@ -50,6 +50,19 @@
#include "sdrc.h" #include "sdrc.h"
#include "control.h" #include "control.h"
#ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state = PM_SUSPEND_ON;
static inline bool is_suspending(void)
{
return (suspend_state != PM_SUSPEND_ON);
}
#else
static inline bool is_suspending(void)
{
return false;
}
#endif
/* Scratchpad offsets */ /* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 #define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0 #define OMAP343X_TABLE_VALUE_OFFSET 0xc0
@ -387,10 +400,11 @@ void omap_sram_idle(void)
} }
/* Block console output in case it is on one of the OMAP UARTs */ /* Block console output in case it is on one of the OMAP UARTs */
if (per_next_state < PWRDM_POWER_ON || if (!is_suspending())
core_next_state < PWRDM_POWER_ON) if (per_next_state < PWRDM_POWER_ON ||
if (try_acquire_console_sem()) core_next_state < PWRDM_POWER_ON)
goto console_still_active; if (try_acquire_console_sem())
goto console_still_active;
/* PER */ /* PER */
if (per_next_state < PWRDM_POWER_ON) { if (per_next_state < PWRDM_POWER_ON) {
@ -470,7 +484,8 @@ void omap_sram_idle(void)
omap_uart_resume_idle(3); omap_uart_resume_idle(3);
} }
release_console_sem(); if (!is_suspending())
release_console_sem();
console_still_active: console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */ /* Disable IO-PAD and IO-CHAIN wakeup */
@ -514,8 +529,6 @@ static void omap3_pm_idle(void)
} }
#ifdef CONFIG_SUSPEND #ifdef CONFIG_SUSPEND
static suspend_state_t suspend_state;
static int omap3_pm_prepare(void) static int omap3_pm_prepare(void)
{ {
disable_hlt(); disable_hlt();

View file

@ -243,13 +243,14 @@
#define OMAP24XX_EN_GPT1_MASK (1 << 0) #define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2) #define OMAP24XX_ST_GPIOS_SHIFT 2
#define OMAP24XX_ST_GPIOS_MASK 2 #define OMAP24XX_ST_GPIOS_MASK (1 << 2)
#define OMAP24XX_ST_GPT1_SHIFT (1 << 0) #define OMAP24XX_ST_GPT1_SHIFT 0
#define OMAP24XX_ST_GPT1_MASK 0 #define OMAP24XX_ST_GPT1_MASK (1 << 0)
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */ /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
#define OMAP2430_ST_MDM_SHIFT (1 << 0) #define OMAP2430_ST_MDM_SHIFT 0
#define OMAP2430_ST_MDM_MASK (1 << 0)
/* 3430 register bits shared between CM & PRM registers */ /* 3430 register bits shared between CM & PRM registers */

View file

@ -16,6 +16,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/err.h>
#include <plat/common.h> #include <plat/common.h>
#include <plat/board.h> #include <plat/board.h>
@ -164,7 +165,7 @@ static int __init omap_init_clocksource_32k(void)
return -ENODEV; return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick) if (!IS_ERR(sync_32k_ick))
clk_enable(sync_32k_ick); clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768, clocksource_32k.mult = clocksource_hz2mult(32768,

View file

@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
cpu_is_omap1710()) cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */ omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611()) else if (cpu_is_omap1611())
omap_sram_size = 0x3e800; /* 250K */ omap_sram_size = SZ_256K;
else { else {
printk(KERN_ERR "Could not detect SRAM size\n"); printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000; omap_sram_size = 0x4000;

View file

@ -7,7 +7,6 @@
* it under the terms of the GNU General Public License version 2 as * it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation. * published by the Free Software Foundation.
*/ */
#define CONFIG_MTD_NAND_OMAP_HWECC
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>