MIPS: Alchemy: drop DB1000 IrDA support bits

The IrDA drivers are gone, drop the now unused DB1000 board
support for it.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Linux-MIPS <linux-mips@vger.kernel.org>
This commit is contained in:
Manuel Lauss 2018-12-19 08:08:01 +01:00 committed by Paul Burton
parent bbb8a75208
commit e898d084ea
No known key found for this signature in database
GPG key ID: 3EA79FACB57500DD

View file

@ -389,58 +389,6 @@ static struct platform_device db1100_mmc1_dev = {
/******************************************************************************/
static void db1000_irda_set_phy_mode(int mode)
{
unsigned short mask = BCSR_RESETS_IRDA_MODE_MASK | BCSR_RESETS_FIR_SEL;
switch (mode) {
case AU1000_IRDA_PHY_MODE_OFF:
bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_OFF);
break;
case AU1000_IRDA_PHY_MODE_SIR:
bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL);
break;
case AU1000_IRDA_PHY_MODE_FIR:
bcsr_mod(BCSR_RESETS, mask, BCSR_RESETS_IRDA_MODE_FULL |
BCSR_RESETS_FIR_SEL);
break;
}
}
static struct au1k_irda_platform_data db1000_irda_platdata = {
.set_phy_mode = db1000_irda_set_phy_mode,
};
static struct resource au1000_irda_res[] = {
[0] = {
.start = AU1000_IRDA_PHYS_ADDR,
.end = AU1000_IRDA_PHYS_ADDR + 0x0fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AU1000_IRDA_TX_INT,
.end = AU1000_IRDA_TX_INT,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = AU1000_IRDA_RX_INT,
.end = AU1000_IRDA_RX_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device db1000_irda_dev = {
.name = "au1000-irda",
.id = -1,
.dev = {
.platform_data = &db1000_irda_platdata,
},
.resource = au1000_irda_res,
.num_resources = ARRAY_SIZE(au1000_irda_res),
};
/******************************************************************************/
static struct ads7846_platform_data db1100_touch_pd = {
.model = 7846,
.vref_mv = 3300,
@ -497,15 +445,10 @@ static struct platform_device *db1x00_devs[] = {
&db1x00_audio_dev,
};
static struct platform_device *db1000_devs[] = {
&db1000_irda_dev,
};
static struct platform_device *db1100_devs[] = {
&au1100_lcd_device,
&db1100_mmc0_dev,
&db1100_mmc1_dev,
&db1000_irda_dev,
};
int __init db1000_dev_setup(void)
@ -565,7 +508,6 @@ int __init db1000_dev_setup(void)
d1 = 3; /* GPIO number, NOT irq! */
s0 = AU1000_GPIO1_INT;
s1 = AU1000_GPIO4_INT;
platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
} else if ((board == BCSR_WHOAMI_PB1500) ||
(board == BCSR_WHOAMI_PB1500R2)) {
c0 = AU1500_GPIO203_INT;