ARC: Build system: Makefiles, Kconfig, Linker script

Arnd in his review pointed out that arch Kconfig organisation has several
deficiencies:

* Build time entries for things which can be runtime extracted from DT
  (e.g. SDRAM size, core clk frequency..)
* Not multi-platform-image-build friendly (choice .. endchoice constructs)
* cpu variants support (750/770) is exclusive.

The first 2 have been fixed in subsequent patches.
Due to the nature of the 750 and 770, it is not possible to build for
both together, w/o special runtime glue code which would hurt
performance.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
This commit is contained in:
Vineet Gupta 2013-01-18 15:12:20 +05:30
parent 79a033c6b9
commit cfdbc2e16e
14 changed files with 816 additions and 0 deletions

2
arch/arc/Kbuild Normal file
View file

@ -0,0 +1,2 @@
obj-y += kernel/
obj-y += mm/

328
arch/arc/Kconfig Normal file
View file

@ -0,0 +1,328 @@
#
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
config ARC
def_bool y
select ARCH_NO_VIRT_TO_BUS
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
select DEVTMPFS if !INITRAMFS_SOURCE=""
select GENERIC_ATOMIC64
select GENERIC_CLOCKEVENTS
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_GENERIC_HARDIRQS
select MODULES_USE_ELF_RELA
config SCHED_OMIT_FRAME_POINTER
def_bool y
config GENERIC_CSUM
def_bool y
config RWSEM_GENERIC_SPINLOCK
def_bool y
config ARCH_FLATMEM_ENABLE
def_bool y
config MMU
def_bool y
config NO_IOPORT
def_bool y
config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_HWEIGHT
def_bool y
config BINFMT_ELF
def_bool y
config HAVE_LATENCYTOP_SUPPORT
def_bool y
config NO_DMA
def_bool n
source "init/Kconfig"
source "kernel/Kconfig.freezer"
menu "ARC Architecture Configuration"
choice
prompt "ARC Platform"
default ARC_PLAT_FPGA_LEGACY
config ARC_PLAT_FPGA_LEGACY
bool "\"Legacy\" ARC FPGA dev platform"
help
Support for ARC development platforms, provided by Synopsys.
These are based on FPGA or ISS. e.g.
- ARCAngel4
- ML509
- MetaWare ISS
#New platform adds here
endchoice
menu "ARC CPU Configuration"
choice
prompt "ARC Core"
default ARC_CPU_770
config ARC_CPU_750D
bool "ARC750D"
help
Support for ARC750 core
config ARC_CPU_770
bool "ARC770"
select ARC_CPU_REL_4_10
help
Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
This core has a bunch of cool new features:
-MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
Shared Address Spaces (for sharing TLB entires in MMU)
-Caches: New Prog Model, Region Flush
-Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
endchoice
config CPU_BIG_ENDIAN
bool "Enable Big Endian Mode"
default n
help
Build kernel for Big Endian Mode of ARC CPU
menuconfig ARC_CACHE
bool "Enable Cache Support"
default y
if ARC_CACHE
config ARC_CACHE_LINE_SHIFT
int "Cache Line Length (as power of 2)"
range 5 7
default "6"
help
Starting with ARC700 4.9, Cache line length is configurable,
This option specifies "N", with Line-len = 2 power N
So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
Linux only supports same line lengths for I and D caches.
config ARC_HAS_ICACHE
bool "Use Instruction Cache"
default y
config ARC_HAS_DCACHE
bool "Use Data Cache"
default y
config ARC_CACHE_PAGES
bool "Per Page Cache Control"
default y
depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
help
This can be used to over-ride the global I/D Cache Enable on a
per-page basis (but only for pages accessed via MMU such as
Kernel Virtual address or User Virtual Address)
TLB entries have a per-page Cache Enable Bit.
Note that Global I/D ENABLE + Per Page DISABLE works but corollary
Global DISABLE + Per Page ENABLE won't work
endif #ARC_CACHE
config ARC_HAS_HW_MPY
bool "Use Hardware Multiplier (Normal or Faster XMAC)"
default y
help
Influences how gcc generates code for MPY operations.
If enabled, MPYxx insns are generated, provided by Standard/XMAC
Multipler. Otherwise software multipy lib is used
choice
prompt "ARC700 MMU Version"
default ARC_MMU_V3 if ARC_CPU_770
default ARC_MMU_V2 if ARC_CPU_750D
config ARC_MMU_V1
bool "MMU v1"
help
Orig ARC700 MMU
config ARC_MMU_V2
bool "MMU v2"
help
Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
when 2 D-TLB and 1 I-TLB entries index into same 2way set.
config ARC_MMU_V3
bool "MMU v3"
depends on ARC_CPU_770
help
Introduced with ARC700 4.10: New Features
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
Shared Address Spaces (SASID)
endchoice
choice
prompt "MMU Page Size"
default ARC_PAGE_SIZE_8K
config ARC_PAGE_SIZE_8K
bool "8KB"
help
Choose between 8k vs 16k
config ARC_PAGE_SIZE_16K
bool "16KB"
depends on ARC_MMU_V3
config ARC_PAGE_SIZE_4K
bool "4KB"
depends on ARC_MMU_V3
endchoice
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
default n
help
Double Precision Floating Point unit had dedictaed regs which
need to be saved/restored across context-switch.
Note that ARC FPU is overly simplistic, unlike say x86, which has
hardware pieces to allow software to conditionally save/restore,
based on actual usage of FPU by a task. Thus our implemn does
this for all tasks in system.
menuconfig ARC_CPU_REL_4_10
bool "Enable support for Rel 4.10 features"
default n
help
-ARC770 (and dependent features) enabled
-ARC750 also shares some of the new features with 770
config ARC_HAS_LLSC
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
default y
depends on ARC_CPU_770
# if SMP, enable LLSC ONLY if ARC implementation has coherent atomics
depends on !SMP || ARC_HAS_COH_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
default y
depends on ARC_CPU_REL_4_10
config ARC_HAS_RTSC
bool "Insn: RTSC (64-bit r/o cycle counter)"
default y
depends on ARC_CPU_REL_4_10
endmenu # "ARC CPU Configuration"
menu "Platform Board Configuration"
source "arch/arc/plat-arcfpga/Kconfig"
#New platform adds here
config ARC_PLAT_CLK
int "Clk speed in Hz"
default "80000000"
config LINUX_LINK_BASE
hex "Linux Link Address"
default "0x80000000"
help
ARC700 divides the 32 bit phy address space into two equal halves
-Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
-Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
Typically Linux kernel is linked at the start of untransalted addr,
hence the default value of 0x8zs.
However some customers have peripherals mapped at this addr, so
Linux needs to be scooted a bit.
If you don't know what the above means, leave this setting alone.
config ARC_PLAT_SDRAM_SIZE
hex "SD RAM Size"
default "0x10000000"
help
Implies the amount of SDRAM/DRAM Linux is going to claim/own.
The actual memory itself could be larger than this number. But for
all software purposes, this is the amt of memory.
endmenu # "Platform Board Configuration"
config ARC_STACK_NONEXEC
bool "Make stack non-executable"
default n
help
To disable the execute permissions of stack/heap of processes
which are enabled by default.
config HZ
int "Timer Frequency"
default 100
menuconfig ARC_DBG
bool "ARC debugging"
default y
config ARC_DBG_TLB_PARANOIA
bool "Paranoia Checks in Low Level TLB Handlers"
depends on ARC_DBG
default n
config ARC_DBG_TLB_MISS_COUNT
bool "Profile TLB Misses"
default n
select DEBUG_FS
depends on ARC_DBG
help
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
config CMDLINE
string "Kernel command line to built-in"
default "print-fatal-signals=1"
help
The default command line which will be appended to the optional
u-boot provided command line (see below)
config CMDLINE_UBOOT
bool "Support U-boot kernel command line passing"
default n
help
If you are using U-boot (www.denx.de) and wish to pass the kernel
command line from the U-boot environment to the Linux kernel then
switch this option on.
ARC U-boot will setup the cmdline in RAM/flash and set r2 to point
to it. kernel startup code will copy the string into cmdline buffer
and also append CONFIG_CMDLINE.
source "kernel/Kconfig.preempt"
endmenu # "ARC Architecture Configuration"
source "mm/Kconfig"
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/arc/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"

34
arch/arc/Kconfig.debug Normal file
View file

@ -0,0 +1,34 @@
menu "Kernel hacking"
source "lib/Kconfig.debug"
config EARLY_PRINTK
bool "Early printk" if EMBEDDED
default y
help
Write kernel log output directly into the VGA buffer or to a serial
port.
This is useful for kernel debugging when your machine crashes very
early before the console code is initialized. For normal operation
it is not recommended because it looks ugly and doesn't cooperate
with klogd/syslogd or the X server. You should normally N here,
unless you want to debug such a crash.
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
help
This option will cause messages to be printed if free stack space
drops below a certain limit.
config 16KSTACKS
bool "Use 16Kb for kernel stacks instead of 8Kb"
help
If you say Y here the kernel will use a 16Kb stacksize for the
kernel stack attached to each process/thread. The default is 8K.
This increases the resident kernel footprint and will cause less
threads to run on the system and also increase the pressure
on the VM subsystem for higher order allocations.
endmenu

115
arch/arc/Makefile Normal file
View file

@ -0,0 +1,115 @@
#
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
UTS_MACHINE := arc
KBUILD_DEFCONFIG := fpga_defconfig
# For ARC FPGA Platforms
platform-$(CONFIG_ARC_PLAT_FPGA_LEGACY) := arcfpga
#New platform adds here
PLATFORM := $(platform-y)
export PLATFORM
cflags-y += -Iarch/arc/plat-$(PLATFORM)/include
cflags-y += -mA7 -fno-common -pipe -fno-builtin -D__linux__
atleast_gcc44 := $(call cc-ifversion, -gt, 0402, y)
cflags-$(atleast_gcc44) += -fsection-anchors
cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
cflags-$(CONFIG_ARC_HAS_RTSC) += -mrtsc
cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables
ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
# Generic build system uses -O2, we want -O3
cflags-y += -O3
endif
# small data is default for elf32 tool-chain. If not usable, disable it
# This also allows repurposing GP as scratch reg to gcc reg allocator
disable_small_data := y
cflags-$(disable_small_data) += -mno-sdata -fcall-used-gp
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mbig-endian
ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
# STAR 9000518362:
# arc-linux-uclibc-ld (buildroot) or arceb-elf32-ld (EZChip) don't accept
# --build-id w/o "-marclinux".
# Default arc-elf32-ld is OK
ldflags-y += -marclinux
ARC_LIBGCC := -mA7
cflags-$(CONFIG_ARC_HAS_HW_MPY) += -multcost=16
ifndef CONFIG_ARC_HAS_HW_MPY
cflags-y += -mno-mpy
# newlib for ARC700 assumes MPY to be always present, which is generally true
# However, if someone really doesn't want MPY, we need to use the 600 ver
# which coupled with -mno-mpy will use mpy emulation
# With gcc 4.4.7, -mno-mpy is enough to make any other related adjustments,
# e.g. increased cost of MPY. With gcc 4.2.1 this had to be explicitly hinted
ARC_LIBGCC := -marc600
ifneq ($(atleast_gcc44),y)
cflags-y += -multcost=30
endif
endif
LIBGCC := $(shell $(CC) $(ARC_LIBGCC) $(cflags-y) --print-libgcc-file-name)
# Modules with short calls might break for calls into builtin-kernel
KBUILD_CFLAGS_MODULE += -mlong-calls
# Finally dump eveything into kernel build system
KBUILD_CFLAGS += $(cflags-y)
KBUILD_AFLAGS += $(KBUILD_CFLAGS)
LDFLAGS += $(ldflags-y)
# Needed for Linker script preprocessing
KBUILD_CPPFLAGS += -Iarch/arc/plat-$(PLATFORM)/include
head-y := arch/arc/kernel/head.o
# See arch/arc/Kbuild for content of core part of the kernel
core-y += arch/arc/
# w/o this ifneq, make ARCH=arc clean was crapping out
ifneq ($(platform-y),)
core-y += arch/arc/plat-$(PLATFORM)/
endif
libs-y += arch/arc/lib/ $(LIBGCC)
#default target for make without any arguements.
KBUILD_IMAGE := bootpImage
all: $(KBUILD_IMAGE)
boot := arch/arc/boot
bootpImage: vmlinux
uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
# Hacks to enable final link due to absence of link-time branch relexation
# and gcc choosing optimal(shorter) branches at -O3
#
# vineetg Feb 2010: -mlong-calls switched off for overall kernel build
# However lib/decompress_inflate.o (.init.text) calls
# zlib_inflate_workspacesize (.text) causing relocation errors.
# Thus forcing all exten calls in this file to be long calls
export CFLAGS_decompress_inflate.o = -mmedium-calls
export CFLAGS_initramfs.o = -mmedium-calls

26
arch/arc/boot/Makefile Normal file
View file

@ -0,0 +1,26 @@
targets := vmlinux.bin vmlinux.bin.gz uImage
# uImage build relies on mkimage being availble on your host for ARC target
# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
# and make sure it's reacable from your PATH
MKIMAGE := $(srctree)/scripts/mkuboot.sh
OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
LINUX_START_TEXT = $$(readelf -h vmlinux | \
grep "Entry point address" | grep -o 0x.*)
UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE)
UIMAGE_ENTRYADDR = $(LINUX_START_TEXT)
UIMAGE_COMPRESSION = gzip
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,uimage)
PHONY += FORCE

View file

@ -33,6 +33,7 @@ generic-y += mman.h
generic-y += msgbuf.h
generic-y += param.h
generic-y += parport.h
generic-y += pci.h
generic-y += percpu.h
generic-y += poll.h
generic-y += posix_types.h

16
arch/arc/kernel/Makefile Normal file
View file

@ -0,0 +1,16 @@
#
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o entry.o process.o
obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o clk.o
obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o
CFLAGS_fpu.o += -mdpfp
obj-y += ctx_sw_asm.o
extra-y := vmlinux.lds head.o

View file

@ -0,0 +1,56 @@
/*
* arcksyms.c - Exporting symbols not exportable from their own sources
*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
/* libgcc functions, not part of kernel sources */
extern void __ashldi3(void);
extern void __ashrdi3(void);
extern void __divsi3(void);
extern void __divsf3(void);
extern void __lshrdi3(void);
extern void __modsi3(void);
extern void __muldi3(void);
extern void __ucmpdi2(void);
extern void __udivsi3(void);
extern void __umodsi3(void);
extern void __cmpdi2(void);
extern void __fixunsdfsi(void);
extern void __muldf3(void);
extern void __divdf3(void);
extern void __floatunsidf(void);
extern void __floatunsisf(void);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__divsi3);
EXPORT_SYMBOL(__divsf3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__modsi3);
EXPORT_SYMBOL(__muldi3);
EXPORT_SYMBOL(__ucmpdi2);
EXPORT_SYMBOL(__udivsi3);
EXPORT_SYMBOL(__umodsi3);
EXPORT_SYMBOL(__cmpdi2);
EXPORT_SYMBOL(__fixunsdfsi);
EXPORT_SYMBOL(__muldf3);
EXPORT_SYMBOL(__divdf3);
EXPORT_SYMBOL(__floatunsidf);
EXPORT_SYMBOL(__floatunsisf);
/* ARC optimised assembler routines */
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memcmp);
EXPORT_SYMBOL(strchr);
EXPORT_SYMBOL(strcpy);
EXPORT_SYMBOL(strcmp);
EXPORT_SYMBOL(strlen);

View file

@ -0,0 +1,61 @@
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
#include <asm/hardirq.h>
#include <asm/page.h>
#include <asm/ptrace.h>
int main(void)
{
DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
BLANK();
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
DEFINE(THREAD_FAULT_ADDR,
offsetof(struct thread_struct, fault_address));
BLANK();
DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags));
DEFINE(THREAD_INFO_PREEMPT_COUNT,
offsetof(struct thread_info, preempt_count));
BLANK();
DEFINE(TASK_ACT_MM, offsetof(struct task_struct, active_mm));
DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
DEFINE(MM_CTXT, offsetof(struct mm_struct, context));
DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
DEFINE(MM_CTXT_ASID, offsetof(mm_context_t, asid));
BLANK();
DEFINE(PT_status32, offsetof(struct pt_regs, status32));
DEFINE(PT_orig_r8, offsetof(struct pt_regs, orig_r8));
DEFINE(PT_sp, offsetof(struct pt_regs, sp));
DEFINE(PT_r0, offsetof(struct pt_regs, r0));
DEFINE(PT_r1, offsetof(struct pt_regs, r1));
DEFINE(PT_r2, offsetof(struct pt_regs, r2));
DEFINE(PT_r3, offsetof(struct pt_regs, r3));
DEFINE(PT_r4, offsetof(struct pt_regs, r4));
DEFINE(PT_r5, offsetof(struct pt_regs, r5));
DEFINE(PT_r6, offsetof(struct pt_regs, r6));
DEFINE(PT_r7, offsetof(struct pt_regs, r7));
return 0;
}

View file

@ -0,0 +1,116 @@
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/thread_info.h>
#include <plat/memmap.h>
OUTPUT_ARCH(arc)
ENTRY(_stext)
#ifdef CONFIG_CPU_BIG_ENDIAN
jiffies = jiffies_64 + 4;
#else
jiffies = jiffies_64;
#endif
SECTIONS
{
. = CONFIG_LINUX_LINK_BASE;
_int_vec_base_lds = .;
.vector : {
*(.vector)
. = ALIGN(PAGE_SIZE);
}
/*
* The reason for having a seperate subsection .init.ramfs is to
* prevent objump from including it in kernel dumps
*
* Reason for having .init.ramfs above .init is to make sure that the
* binary blob is tucked away to one side, reducing the displacement
* between .init.text and .text, avoiding any possible relocation
* errors because of calls from .init.text to .text
* Yes such calls do exist. e.g.
* decompress_inflate.c:gunzip( ) -> zlib_inflate_workspace( )
*/
__init_begin = .;
.init.ramfs : { INIT_RAM_FS }
. = ALIGN(PAGE_SIZE);
_stext = .;
HEAD_TEXT_SECTION
INIT_TEXT_SECTION(L1_CACHE_BYTES)
/* INIT_DATA_SECTION open-coded: special INIT_RAM_FS handling */
.init.data : {
INIT_DATA
INIT_SETUP(L1_CACHE_BYTES)
INIT_CALLS
CON_INITCALL
SECURITY_INITCALL
}
PERCPU_SECTION(L1_CACHE_BYTES)
/*
* .exit.text is discard at runtime, not link time, to deal with
* references from .debug_frame
* It will be init freed, being inside [__init_start : __init_end]
*/
.exit.text : { EXIT_TEXT }
.exit.data : { EXIT_DATA }
. = ALIGN(PAGE_SIZE);
__init_end = .;
.text : {
_text = .;
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
}
EXCEPTION_TABLE(L1_CACHE_BYTES)
_etext = .;
_sdata = .;
RO_DATA_SECTION(PAGE_SIZE)
/*
* 1. this is .data essentially
* 2. THREAD_SIZE for init.task, must be kernel-stk sz aligned
*/
RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
_edata = .;
BSS_SECTION(0, 0, 0)
NOTES
. = ALIGN(PAGE_SIZE);
_end = . ;
STABS_DEBUG
DWARF_DEBUG
DISCARDS
.arcextmap 0 : {
*(.gnu.linkonce.arcextmap.*)
*(.arcextmap.*)
}
}

9
arch/arc/lib/Makefile Normal file
View file

@ -0,0 +1,9 @@
#
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
lib-y := strchr-700.o strcmp.o strcpy-700.o strlen.o
lib-y += memcmp.o memcpy-700.o memset.o

10
arch/arc/mm/Makefile Normal file
View file

@ -0,0 +1,10 @@
#
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
obj-y := extable.o ioremap.o dma.o fault.o init.o
obj-y += tlb.o tlbex.o cache_arc700.o

View file

@ -0,0 +1,33 @@
#
# Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
if ARC_PLAT_FPGA_LEGACY
choice
prompt "FPGA Board"
config ARC_BOARD_ANGEL4
bool "ARC Angel4"
help
ARC Angel4 FPGA Ref Platform (Xilinx Virtex Based)
config ARC_BOARD_ML509
bool "ML509"
help
ARC ML509 FPGA Ref Platform (Xilinx Virtex-5 Based)
endchoice
config ARC_SERIAL_BAUD
int "UART Baud rate"
default "115200"
depends on SERIAL_ARC || SERIAL_ARC_CONSOLE
help
Baud rate for the ARC UART
endif

View file

@ -0,0 +1,9 @@
#
# Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
obj-y := platform.o irq.o