diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
new file mode 100644
index 000000000000..9d43553a8d39
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
@@ -0,0 +1,20 @@
+* Broadcom STB thermal management
+
+Thermal management core, provided by the AVS TMON hardware block.
+
+Required properties:
+- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445"
+- reg: address range for the AVS TMON registers
+- interrupts: temperature monitor interrupt, for high/low threshold triggers
+- interrupt-names: should be "tmon"
+- interrupt-parent: the parent interrupt controller
+
+Example:
+
+	thermal@f04d1500 {
+		compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+		reg = <0xf04d1500 0x28>;
+		interrupts = <0x6>;
+		interrupt-names = "tmon";
+		interrupt-parent = <&avs_host_l2_intc>;
+	};
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
index 3c67bd50aa10..28be51afdb6a 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -7,10 +7,17 @@ Required properties:
   is higher than panic threshold, system will auto reboot by SRC module.
 - fsl,tempmon : phandle pointer to system controller that contains TEMPMON
   control registers, e.g. ANATOP on imx6q.
+- nvmem-cells: A phandle to the calibration cells provided by ocotp.
+- nvmem-cell-names: Should be "calib", "temp_grade".
+
+Deprecated properties:
 - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
   calibration data, e.g. OCOTP on imx6q.  The details about calibration data
   can be found in SoC Reference Manual.
 
+Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips
+because it does not handle OCOTP clock requirements.
+
 Optional properties:
 - clocks : thermal sensor's clock source.
 
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
index e3a6234fb1ac..43d744e5305e 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -2,6 +2,7 @@
 
 Required properties:
 - compatible : should be "rockchip,<name>-tsadc"
+   "rockchip,rv1108-tsadc": found on RV1108 SoCs
    "rockchip,rk3228-tsadc": found on RK3228 SoCs
    "rockchip,rk3288-tsadc": found on RK3288 SoCs
    "rockchip,rk3328-tsadc": found on RK3328 SoCs
diff --git a/MAINTAINERS b/MAINTAINERS
index 2098512e9f10..bcab816b25f4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2986,6 +2986,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
 F:	drivers/cpufreq/brcmstb*
 
+BROADCOM STB AVS TMON DRIVER
+M:	Markus Mayer <mmayer@broadcom.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
+F:	drivers/thermal/broadcom/brcmstb*
+
 BROADCOM STB NAND FLASH DRIVER
 M:	Brian Norris <computersforpeace@gmail.com>
 M:	Kamal Dasu <kdasu.kdev@gmail.com>
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 07002df4f83a..315ae2926e20 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -206,6 +206,7 @@ config HISI_THERMAL
 config IMX_THERMAL
 	tristate "Temperature sensor driver for Freescale i.MX SoCs"
 	depends on (ARCH_MXC && CPU_THERMAL) || COMPILE_TEST
+	depends on NVMEM || !NVMEM
 	depends on MFD_SYSCON
 	depends on OF
 	help
@@ -408,7 +409,7 @@ config MTK_THERMAL
 	  controller present in Mediatek SoCs
 
 menu "Broadcom thermal drivers"
-depends on ARCH_BCM || COMPILE_TEST
+depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
 source "drivers/thermal/broadcom/Kconfig"
 endmenu
 
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index ae75328945f7..706d74798cbe 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -58,7 +58,7 @@ struct armada_thermal_data {
 	/* Test for a valid sensor value (optional) */
 	bool (*is_valid)(struct armada_thermal_priv *);
 
-	/* Formula coeficients: temp = (b + m * reg) / div */
+	/* Formula coeficients: temp = (b - m * reg) / div */
 	unsigned long coef_b;
 	unsigned long coef_m;
 	unsigned long coef_div;
diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig
index 42c098e86f84..c106a15bf7f9 100644
--- a/drivers/thermal/broadcom/Kconfig
+++ b/drivers/thermal/broadcom/Kconfig
@@ -6,6 +6,13 @@ config BCM2835_THERMAL
 	help
 	  Support for thermal sensors on Broadcom bcm2835 SoCs.
 
+config BRCMSTB_THERMAL
+	tristate "Broadcom STB AVS TMON thermal driver"
+	depends on ARCH_BRCMSTB || COMPILE_TEST
+	help
+	  Enable this driver if you have a Broadcom STB SoC and would like
+	  thermal framework support.
+
 config BCM_NS_THERMAL
 	tristate "Northstar thermal driver"
 	depends on ARCH_BCM_IPROC || COMPILE_TEST
diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile
index c6f62e4fd0ee..fae10ecafaef 100644
--- a/drivers/thermal/broadcom/Makefile
+++ b/drivers/thermal/broadcom/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_BCM2835_THERMAL)		+= bcm2835_thermal.o
+obj-$(CONFIG_BRCMSTB_THERMAL)		+= brcmstb_thermal.o
 obj-$(CONFIG_BCM_NS_THERMAL)		+= ns-thermal.o
diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
new file mode 100644
index 000000000000..1919f91fa756
--- /dev/null
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -0,0 +1,387 @@
+/*
+ * Broadcom STB AVS TMON thermal sensor driver
+ *
+ * Copyright (c) 2015-2017 Broadcom
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define DRV_NAME	"brcmstb_thermal"
+
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irqreturn.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+
+#define AVS_TMON_STATUS			0x00
+ #define AVS_TMON_STATUS_valid_msk	BIT(11)
+ #define AVS_TMON_STATUS_data_msk	GENMASK(10, 1)
+ #define AVS_TMON_STATUS_data_shift	1
+
+#define AVS_TMON_EN_OVERTEMP_RESET	0x04
+ #define AVS_TMON_EN_OVERTEMP_RESET_msk	BIT(0)
+
+#define AVS_TMON_RESET_THRESH		0x08
+ #define AVS_TMON_RESET_THRESH_msk	GENMASK(10, 1)
+ #define AVS_TMON_RESET_THRESH_shift	1
+
+#define AVS_TMON_INT_IDLE_TIME		0x10
+
+#define AVS_TMON_EN_TEMP_INT_SRCS	0x14
+ #define AVS_TMON_EN_TEMP_INT_SRCS_high	BIT(1)
+ #define AVS_TMON_EN_TEMP_INT_SRCS_low	BIT(0)
+
+#define AVS_TMON_INT_THRESH		0x18
+ #define AVS_TMON_INT_THRESH_high_msk	GENMASK(26, 17)
+ #define AVS_TMON_INT_THRESH_high_shift	17
+ #define AVS_TMON_INT_THRESH_low_msk	GENMASK(10, 1)
+ #define AVS_TMON_INT_THRESH_low_shift	1
+
+#define AVS_TMON_TEMP_INT_CODE		0x1c
+#define AVS_TMON_TP_TEST_ENABLE		0x20
+
+/* Default coefficients */
+#define AVS_TMON_TEMP_SLOPE		-487
+#define AVS_TMON_TEMP_OFFSET		410040
+
+/* HW related temperature constants */
+#define AVS_TMON_TEMP_MAX		0x3ff
+#define AVS_TMON_TEMP_MIN		-88161
+#define AVS_TMON_TEMP_MASK		AVS_TMON_TEMP_MAX
+
+enum avs_tmon_trip_type {
+	TMON_TRIP_TYPE_LOW = 0,
+	TMON_TRIP_TYPE_HIGH,
+	TMON_TRIP_TYPE_RESET,
+	TMON_TRIP_TYPE_MAX,
+};
+
+struct avs_tmon_trip {
+	/* HW bit to enable the trip */
+	u32 enable_offs;
+	u32 enable_mask;
+
+	/* HW field to read the trip temperature */
+	u32 reg_offs;
+	u32 reg_msk;
+	int reg_shift;
+};
+
+static struct avs_tmon_trip avs_tmon_trips[] = {
+	/* Trips when temperature is below threshold */
+	[TMON_TRIP_TYPE_LOW] = {
+		.enable_offs	= AVS_TMON_EN_TEMP_INT_SRCS,
+		.enable_mask	= AVS_TMON_EN_TEMP_INT_SRCS_low,
+		.reg_offs	= AVS_TMON_INT_THRESH,
+		.reg_msk	= AVS_TMON_INT_THRESH_low_msk,
+		.reg_shift	= AVS_TMON_INT_THRESH_low_shift,
+	},
+	/* Trips when temperature is above threshold */
+	[TMON_TRIP_TYPE_HIGH] = {
+		.enable_offs	= AVS_TMON_EN_TEMP_INT_SRCS,
+		.enable_mask	= AVS_TMON_EN_TEMP_INT_SRCS_high,
+		.reg_offs	= AVS_TMON_INT_THRESH,
+		.reg_msk	= AVS_TMON_INT_THRESH_high_msk,
+		.reg_shift	= AVS_TMON_INT_THRESH_high_shift,
+	},
+	/* Automatically resets chip when above threshold */
+	[TMON_TRIP_TYPE_RESET] = {
+		.enable_offs	= AVS_TMON_EN_OVERTEMP_RESET,
+		.enable_mask	= AVS_TMON_EN_OVERTEMP_RESET_msk,
+		.reg_offs	= AVS_TMON_RESET_THRESH,
+		.reg_msk	= AVS_TMON_RESET_THRESH_msk,
+		.reg_shift	= AVS_TMON_RESET_THRESH_shift,
+	},
+};
+
+struct brcmstb_thermal_priv {
+	void __iomem *tmon_base;
+	struct device *dev;
+	struct thermal_zone_device *thermal;
+};
+
+static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope,
+				int *offset)
+{
+	*slope = thermal_zone_get_slope(tz);
+	*offset = thermal_zone_get_offset(tz);
+}
+
+/* Convert a HW code to a temperature reading (millidegree celsius) */
+static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz,
+					u32 code)
+{
+	const int val = code & AVS_TMON_TEMP_MASK;
+	int slope, offset;
+
+	avs_tmon_get_coeffs(tz, &slope, &offset);
+
+	return slope * val + offset;
+}
+
+/*
+ * Convert a temperature value (millidegree celsius) to a HW code
+ *
+ * @temp: temperature to convert
+ * @low: if true, round toward the low side
+ */
+static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz,
+					int temp, bool low)
+{
+	int slope, offset;
+
+	if (temp < AVS_TMON_TEMP_MIN)
+		return AVS_TMON_TEMP_MAX; /* Maximum code value */
+
+	avs_tmon_get_coeffs(tz, &slope, &offset);
+
+	if (temp >= offset)
+		return 0;	/* Minimum code value */
+
+	if (low)
+		return (u32)(DIV_ROUND_UP(offset - temp, abs(slope)));
+	else
+		return (u32)((offset - temp) / abs(slope));
+}
+
+static int brcmstb_get_temp(void *data, int *temp)
+{
+	struct brcmstb_thermal_priv *priv = data;
+	u32 val;
+	long t;
+
+	val = __raw_readl(priv->tmon_base + AVS_TMON_STATUS);
+
+	if (!(val & AVS_TMON_STATUS_valid_msk)) {
+		dev_err(priv->dev, "reading not valid\n");
+		return -EIO;
+	}
+
+	val = (val & AVS_TMON_STATUS_data_msk) >> AVS_TMON_STATUS_data_shift;
+
+	t = avs_tmon_code_to_temp(priv->thermal, val);
+	if (t < 0)
+		*temp = 0;
+	else
+		*temp = t;
+
+	return 0;
+}
+
+static void avs_tmon_trip_enable(struct brcmstb_thermal_priv *priv,
+				 enum avs_tmon_trip_type type, int en)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val = __raw_readl(priv->tmon_base + trip->enable_offs);
+
+	dev_dbg(priv->dev, "%sable trip, type %d\n", en ? "en" : "dis", type);
+
+	if (en)
+		val |= trip->enable_mask;
+	else
+		val &= ~trip->enable_mask;
+
+	__raw_writel(val, priv->tmon_base + trip->enable_offs);
+}
+
+static int avs_tmon_get_trip_temp(struct brcmstb_thermal_priv *priv,
+				  enum avs_tmon_trip_type type)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val = __raw_readl(priv->tmon_base + trip->reg_offs);
+
+	val &= trip->reg_msk;
+	val >>= trip->reg_shift;
+
+	return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static void avs_tmon_set_trip_temp(struct brcmstb_thermal_priv *priv,
+				   enum avs_tmon_trip_type type,
+				   int temp)
+{
+	struct avs_tmon_trip *trip = &avs_tmon_trips[type];
+	u32 val, orig;
+
+	dev_dbg(priv->dev, "set temp %d to %d\n", type, temp);
+
+	/* round toward low temp for the low interrupt */
+	val = avs_tmon_temp_to_code(priv->thermal, temp,
+				    type == TMON_TRIP_TYPE_LOW);
+
+	val <<= trip->reg_shift;
+	val &= trip->reg_msk;
+
+	orig = __raw_readl(priv->tmon_base + trip->reg_offs);
+	orig &= ~trip->reg_msk;
+	orig |= val;
+	__raw_writel(orig, priv->tmon_base + trip->reg_offs);
+}
+
+static int avs_tmon_get_intr_temp(struct brcmstb_thermal_priv *priv)
+{
+	u32 val;
+
+	val = __raw_readl(priv->tmon_base + AVS_TMON_TEMP_INT_CODE);
+	return avs_tmon_code_to_temp(priv->thermal, val);
+}
+
+static irqreturn_t brcmstb_tmon_irq_thread(int irq, void *data)
+{
+	struct brcmstb_thermal_priv *priv = data;
+	int low, high, intr;
+
+	low = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_LOW);
+	high = avs_tmon_get_trip_temp(priv, TMON_TRIP_TYPE_HIGH);
+	intr = avs_tmon_get_intr_temp(priv);
+
+	dev_dbg(priv->dev, "low/intr/high: %d/%d/%d\n",
+			low, intr, high);
+
+	/* Disable high-temp until next threshold shift */
+	if (intr >= high)
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+	/* Disable low-temp until next threshold shift */
+	if (intr <= low)
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+
+	/*
+	 * Notify using the interrupt temperature, in case the temperature
+	 * changes before it can next be read out
+	 */
+	thermal_zone_device_update(priv->thermal, intr);
+
+	return IRQ_HANDLED;
+}
+
+static int brcmstb_set_trips(void *data, int low, int high)
+{
+	struct brcmstb_thermal_priv *priv = data;
+
+	dev_dbg(priv->dev, "set trips %d <--> %d\n", low, high);
+
+	/*
+	 * Disable low-temp if "low" is too small. As per thermal framework
+	 * API, we use -INT_MAX rather than INT_MIN.
+	 */
+	if (low <= -INT_MAX) {
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 0);
+	} else {
+		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_LOW, low);
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_LOW, 1);
+	}
+
+	/* Disable high-temp if "high" is too big. */
+	if (high == INT_MAX) {
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 0);
+	} else {
+		avs_tmon_set_trip_temp(priv, TMON_TRIP_TYPE_HIGH, high);
+		avs_tmon_trip_enable(priv, TMON_TRIP_TYPE_HIGH, 1);
+	}
+
+	return 0;
+}
+
+static struct thermal_zone_of_device_ops of_ops = {
+	.get_temp	= brcmstb_get_temp,
+	.set_trips	= brcmstb_set_trips,
+};
+
+static const struct of_device_id brcmstb_thermal_id_table[] = {
+	{ .compatible = "brcm,avs-tmon" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_thermal_id_table);
+
+static int brcmstb_thermal_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal;
+	struct brcmstb_thermal_priv *priv;
+	struct resource *res;
+	int irq, ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->tmon_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->tmon_base))
+		return PTR_ERR(priv->tmon_base);
+
+	priv->dev = &pdev->dev;
+	platform_set_drvdata(pdev, priv);
+
+	thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &of_ops);
+	if (IS_ERR(thermal)) {
+		ret = PTR_ERR(thermal);
+		dev_err(&pdev->dev, "could not register sensor: %d\n", ret);
+		return ret;
+	}
+
+	priv->thermal = thermal;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "could not get IRQ\n");
+		ret = irq;
+		goto err;
+	}
+	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					brcmstb_tmon_irq_thread, IRQF_ONESHOT,
+					DRV_NAME, priv);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not request IRQ: %d\n", ret);
+		goto err;
+	}
+
+	dev_info(&pdev->dev, "registered AVS TMON of-sensor driver\n");
+
+	return 0;
+
+err:
+	thermal_zone_of_sensor_unregister(&pdev->dev, thermal);
+	return ret;
+}
+
+static int brcmstb_thermal_exit(struct platform_device *pdev)
+{
+	struct brcmstb_thermal_priv *priv = platform_get_drvdata(pdev);
+	struct thermal_zone_device *thermal = priv->thermal;
+
+	if (thermal)
+		thermal_zone_of_sensor_unregister(&pdev->dev, priv->thermal);
+
+	return 0;
+}
+
+static struct platform_driver brcmstb_thermal_driver = {
+	.probe = brcmstb_thermal_probe,
+	.remove = brcmstb_thermal_exit,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = brcmstb_thermal_id_table,
+	},
+};
+module_platform_driver(brcmstb_thermal_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("Broadcom STB AVS TMON thermal driver");
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 908a8014cf76..dc63aba092e4 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -696,7 +696,7 @@ __cpufreq_cooling_register(struct device_node *np,
 	bool first;
 
 	if (IS_ERR_OR_NULL(policy)) {
-		pr_err("%s: cpufreq policy isn't valid: %p", __func__, policy);
+		pr_err("%s: cpufreq policy isn't valid: %p\n", __func__, policy);
 		return ERR_PTR(-EINVAL);
 	}
 
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index bd3572c41585..2d855a96cdd9 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -23,186 +23,423 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/of_device.h>
 
 #include "thermal_core.h"
 
-#define TEMP0_TH			(0x4)
-#define TEMP0_RST_TH			(0x8)
-#define TEMP0_CFG			(0xC)
-#define TEMP0_EN			(0x10)
-#define TEMP0_INT_EN			(0x14)
-#define TEMP0_INT_CLR			(0x18)
-#define TEMP0_RST_MSK			(0x1C)
-#define TEMP0_VALUE			(0x28)
+#define HI6220_TEMP0_LAG			(0x0)
+#define HI6220_TEMP0_TH				(0x4)
+#define HI6220_TEMP0_RST_TH			(0x8)
+#define HI6220_TEMP0_CFG			(0xC)
+#define HI6220_TEMP0_CFG_SS_MSK			(0xF000)
+#define HI6220_TEMP0_CFG_HDAK_MSK		(0x30)
+#define HI6220_TEMP0_EN				(0x10)
+#define HI6220_TEMP0_INT_EN			(0x14)
+#define HI6220_TEMP0_INT_CLR			(0x18)
+#define HI6220_TEMP0_RST_MSK			(0x1C)
+#define HI6220_TEMP0_VALUE			(0x28)
 
-#define HISI_TEMP_BASE			(-60)
-#define HISI_TEMP_RESET			(100000)
+#define HI3660_OFFSET(chan)		((chan) * 0x40)
+#define HI3660_TEMP(chan)		(HI3660_OFFSET(chan) + 0x1C)
+#define HI3660_TH(chan)			(HI3660_OFFSET(chan) + 0x20)
+#define HI3660_LAG(chan)		(HI3660_OFFSET(chan) + 0x28)
+#define HI3660_INT_EN(chan)		(HI3660_OFFSET(chan) + 0x2C)
+#define HI3660_INT_CLR(chan)		(HI3660_OFFSET(chan) + 0x30)
 
-#define HISI_MAX_SENSORS		4
+#define HI6220_TEMP_BASE			(-60000)
+#define HI6220_TEMP_RESET			(100000)
+#define HI6220_TEMP_STEP			(785)
+#define HI6220_TEMP_LAG				(3500)
+
+#define HI3660_TEMP_BASE		(-63780)
+#define HI3660_TEMP_STEP		(205)
+#define HI3660_TEMP_LAG			(4000)
+
+#define HI6220_DEFAULT_SENSOR		2
+#define HI3660_DEFAULT_SENSOR		1
 
 struct hisi_thermal_sensor {
-	struct hisi_thermal_data *thermal;
 	struct thermal_zone_device *tzd;
-
-	long sensor_temp;
 	uint32_t id;
 	uint32_t thres_temp;
 };
 
 struct hisi_thermal_data {
-	struct mutex thermal_lock;    /* protects register data */
+	int (*get_temp)(struct hisi_thermal_data *data);
+	int (*enable_sensor)(struct hisi_thermal_data *data);
+	int (*disable_sensor)(struct hisi_thermal_data *data);
+	int (*irq_handler)(struct hisi_thermal_data *data);
 	struct platform_device *pdev;
 	struct clk *clk;
-	struct hisi_thermal_sensor sensors[HISI_MAX_SENSORS];
-
-	int irq, irq_bind_sensor;
-	bool irq_enabled;
-
+	struct hisi_thermal_sensor sensor;
 	void __iomem *regs;
+	int irq;
 };
 
-/* in millicelsius */
-static inline int _step_to_temp(int step)
+/*
+ * The temperature computation on the tsensor is as follow:
+ *	Unit: millidegree Celsius
+ *	Step: 200/255 (0.7843)
+ *	Temperature base: -60°C
+ *
+ * The register is programmed in temperature steps, every step is 785
+ * millidegree and begins at -60 000 m°C
+ *
+ * The temperature from the steps:
+ *
+ *	Temp = TempBase + (steps x 785)
+ *
+ * and the steps from the temperature:
+ *
+ *	steps = (Temp - TempBase) / 785
+ *
+ */
+static inline int hi6220_thermal_step_to_temp(int step)
 {
-	/*
-	 * Every step equals (1 * 200) / 255 celsius, and finally
-	 * need convert to millicelsius.
-	 */
-	return (HISI_TEMP_BASE * 1000 + (step * 200000 / 255));
+	return HI6220_TEMP_BASE + (step * HI6220_TEMP_STEP);
 }
 
-static inline long _temp_to_step(long temp)
+static inline int hi6220_thermal_temp_to_step(int temp)
 {
-	return ((temp - HISI_TEMP_BASE * 1000) * 255) / 200000;
+	return DIV_ROUND_UP(temp - HI6220_TEMP_BASE, HI6220_TEMP_STEP);
 }
 
-static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data,
-					 struct hisi_thermal_sensor *sensor)
+/*
+ * for Hi3660,
+ *	Step: 189/922 (0.205)
+ *	Temperature base: -63.780°C
+ *
+ * The register is programmed in temperature steps, every step is 205
+ * millidegree and begins at -63 780 m°C
+ */
+static inline int hi3660_thermal_step_to_temp(int step)
 {
-	long val;
+	return HI3660_TEMP_BASE + step * HI3660_TEMP_STEP;
+}
 
-	mutex_lock(&data->thermal_lock);
+static inline int hi3660_thermal_temp_to_step(int temp)
+{
+	return DIV_ROUND_UP(temp - HI3660_TEMP_BASE, HI3660_TEMP_STEP);
+}
 
-	/* disable interrupt */
-	writel(0x0, data->regs + TEMP0_INT_EN);
-	writel(0x1, data->regs + TEMP0_INT_CLR);
+/*
+ * The lag register contains 5 bits encoding the temperature in steps.
+ *
+ * Each time the temperature crosses the threshold boundary, an
+ * interrupt is raised. It could be when the temperature is going
+ * above the threshold or below. However, if the temperature is
+ * fluctuating around this value due to the load, we can receive
+ * several interrupts which may not desired.
+ *
+ * We can setup a temperature representing the delta between the
+ * threshold and the current temperature when the temperature is
+ * decreasing.
+ *
+ * For instance: the lag register is 5°C, the threshold is 65°C, when
+ * the temperature reaches 65°C an interrupt is raised and when the
+ * temperature decrease to 65°C - 5°C another interrupt is raised.
+ *
+ * A very short lag can lead to an interrupt storm, a long lag
+ * increase the latency to react to the temperature changes.  In our
+ * case, that is not really a problem as we are polling the
+ * temperature.
+ *
+ * [0:4] : lag register
+ *
+ * The temperature is coded in steps, cf. HI6220_TEMP_STEP.
+ *
+ * Min : 0x00 :  0.0 °C
+ * Max : 0x1F : 24.3 °C
+ *
+ * The 'value' parameter is in milliCelsius.
+ */
+static inline void hi6220_thermal_set_lag(void __iomem *addr, int value)
+{
+	writel(DIV_ROUND_UP(value, HI6220_TEMP_STEP) & 0x1F,
+			addr + HI6220_TEMP0_LAG);
+}
+
+static inline void hi6220_thermal_alarm_clear(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_INT_CLR);
+}
+
+static inline void hi6220_thermal_alarm_enable(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_INT_EN);
+}
+
+static inline void hi6220_thermal_alarm_set(void __iomem *addr, int temp)
+{
+	writel(hi6220_thermal_temp_to_step(temp) | 0x0FFFFFF00,
+	       addr + HI6220_TEMP0_TH);
+}
+
+static inline void hi6220_thermal_reset_set(void __iomem *addr, int temp)
+{
+	writel(hi6220_thermal_temp_to_step(temp), addr + HI6220_TEMP0_RST_TH);
+}
+
+static inline void hi6220_thermal_reset_enable(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_RST_MSK);
+}
+
+static inline void hi6220_thermal_enable(void __iomem *addr, int value)
+{
+	writel(value, addr + HI6220_TEMP0_EN);
+}
+
+static inline int hi6220_thermal_get_temperature(void __iomem *addr)
+{
+	return hi6220_thermal_step_to_temp(readl(addr + HI6220_TEMP0_VALUE));
+}
+
+/*
+ * [0:6] lag register
+ *
+ * The temperature is coded in steps, cf. HI3660_TEMP_STEP.
+ *
+ * Min : 0x00 :  0.0 °C
+ * Max : 0x7F : 26.0 °C
+ *
+ */
+static inline void hi3660_thermal_set_lag(void __iomem *addr,
+					  int id, int value)
+{
+	writel(DIV_ROUND_UP(value, HI3660_TEMP_STEP) & 0x7F,
+			addr + HI3660_LAG(id));
+}
+
+static inline void hi3660_thermal_alarm_clear(void __iomem *addr,
+					      int id, int value)
+{
+	writel(value, addr + HI3660_INT_CLR(id));
+}
+
+static inline void hi3660_thermal_alarm_enable(void __iomem *addr,
+					       int id, int value)
+{
+	writel(value, addr + HI3660_INT_EN(id));
+}
+
+static inline void hi3660_thermal_alarm_set(void __iomem *addr,
+					    int id, int value)
+{
+	writel(value, addr + HI3660_TH(id));
+}
+
+static inline int hi3660_thermal_get_temperature(void __iomem *addr, int id)
+{
+	return hi3660_thermal_step_to_temp(readl(addr + HI3660_TEMP(id)));
+}
+
+/*
+ * Temperature configuration register - Sensor selection
+ *
+ * Bits [19:12]
+ *
+ * 0x0: local sensor (default)
+ * 0x1: remote sensor 1 (ACPU cluster 1)
+ * 0x2: remote sensor 2 (ACPU cluster 0)
+ * 0x3: remote sensor 3 (G3D)
+ */
+static inline void hi6220_thermal_sensor_select(void __iomem *addr, int sensor)
+{
+	writel((readl(addr + HI6220_TEMP0_CFG) & ~HI6220_TEMP0_CFG_SS_MSK) |
+	       (sensor << 12), addr + HI6220_TEMP0_CFG);
+}
+
+/*
+ * Temperature configuration register - Hdak conversion polling interval
+ *
+ * Bits [5:4]
+ *
+ * 0x0 :   0.768 ms
+ * 0x1 :   6.144 ms
+ * 0x2 :  49.152 ms
+ * 0x3 : 393.216 ms
+ */
+static inline void hi6220_thermal_hdak_set(void __iomem *addr, int value)
+{
+	writel((readl(addr + HI6220_TEMP0_CFG) & ~HI6220_TEMP0_CFG_HDAK_MSK) |
+	       (value << 4), addr + HI6220_TEMP0_CFG);
+}
+
+static int hi6220_thermal_irq_handler(struct hisi_thermal_data *data)
+{
+	hi6220_thermal_alarm_clear(data->regs, 1);
+	return 0;
+}
+
+static int hi3660_thermal_irq_handler(struct hisi_thermal_data *data)
+{
+	hi3660_thermal_alarm_clear(data->regs, data->sensor.id, 1);
+	return 0;
+}
+
+static int hi6220_thermal_get_temp(struct hisi_thermal_data *data)
+{
+	return hi6220_thermal_get_temperature(data->regs);
+}
+
+static int hi3660_thermal_get_temp(struct hisi_thermal_data *data)
+{
+	return hi3660_thermal_get_temperature(data->regs, data->sensor.id);
+}
+
+static int hi6220_thermal_disable_sensor(struct hisi_thermal_data *data)
+{
+	/* disable sensor module */
+	hi6220_thermal_enable(data->regs, 0);
+	hi6220_thermal_alarm_enable(data->regs, 0);
+	hi6220_thermal_reset_enable(data->regs, 0);
+
+	clk_disable_unprepare(data->clk);
+
+	return 0;
+}
+
+static int hi3660_thermal_disable_sensor(struct hisi_thermal_data *data)
+{
+	/* disable sensor module */
+	hi3660_thermal_alarm_enable(data->regs, data->sensor.id, 0);
+	return 0;
+}
+
+static int hi6220_thermal_enable_sensor(struct hisi_thermal_data *data)
+{
+	struct hisi_thermal_sensor *sensor = &data->sensor;
+	int ret;
+
+	/* enable clock for tsensor */
+	ret = clk_prepare_enable(data->clk);
+	if (ret)
+		return ret;
 
 	/* disable module firstly */
-	writel(0x0, data->regs + TEMP0_EN);
+	hi6220_thermal_reset_enable(data->regs, 0);
+	hi6220_thermal_enable(data->regs, 0);
 
 	/* select sensor id */
-	writel((sensor->id << 12), data->regs + TEMP0_CFG);
-
-	/* enable module */
-	writel(0x1, data->regs + TEMP0_EN);
-
-	usleep_range(3000, 5000);
-
-	val = readl(data->regs + TEMP0_VALUE);
-	val = _step_to_temp(val);
-
-	mutex_unlock(&data->thermal_lock);
-
-	return val;
-}
-
-static void hisi_thermal_enable_bind_irq_sensor
-			(struct hisi_thermal_data *data)
-{
-	struct hisi_thermal_sensor *sensor;
-
-	mutex_lock(&data->thermal_lock);
-
-	sensor = &data->sensors[data->irq_bind_sensor];
+	hi6220_thermal_sensor_select(data->regs, sensor->id);
 
 	/* setting the hdak time */
-	writel(0x0, data->regs + TEMP0_CFG);
+	hi6220_thermal_hdak_set(data->regs, 0);
 
-	/* disable module firstly */
-	writel(0x0, data->regs + TEMP0_RST_MSK);
-	writel(0x0, data->regs + TEMP0_EN);
-
-	/* select sensor id */
-	writel((sensor->id << 12), data->regs + TEMP0_CFG);
+	/* setting lag value between current temp and the threshold */
+	hi6220_thermal_set_lag(data->regs, HI6220_TEMP_LAG);
 
 	/* enable for interrupt */
-	writel(_temp_to_step(sensor->thres_temp) | 0x0FFFFFF00,
-	       data->regs + TEMP0_TH);
+	hi6220_thermal_alarm_set(data->regs, sensor->thres_temp);
 
-	writel(_temp_to_step(HISI_TEMP_RESET), data->regs + TEMP0_RST_TH);
+	hi6220_thermal_reset_set(data->regs, HI6220_TEMP_RESET);
 
 	/* enable module */
-	writel(0x1, data->regs + TEMP0_RST_MSK);
-	writel(0x1, data->regs + TEMP0_EN);
+	hi6220_thermal_reset_enable(data->regs, 1);
+	hi6220_thermal_enable(data->regs, 1);
 
-	writel(0x0, data->regs + TEMP0_INT_CLR);
-	writel(0x1, data->regs + TEMP0_INT_EN);
+	hi6220_thermal_alarm_clear(data->regs, 0);
+	hi6220_thermal_alarm_enable(data->regs, 1);
 
-	usleep_range(3000, 5000);
-
-	mutex_unlock(&data->thermal_lock);
+	return 0;
 }
 
-static void hisi_thermal_disable_sensor(struct hisi_thermal_data *data)
+static int hi3660_thermal_enable_sensor(struct hisi_thermal_data *data)
 {
-	mutex_lock(&data->thermal_lock);
+	unsigned int value;
+	struct hisi_thermal_sensor *sensor = &data->sensor;
 
-	/* disable sensor module */
-	writel(0x0, data->regs + TEMP0_INT_EN);
-	writel(0x0, data->regs + TEMP0_RST_MSK);
-	writel(0x0, data->regs + TEMP0_EN);
+	/* disable interrupt */
+	hi3660_thermal_alarm_enable(data->regs, sensor->id, 0);
 
-	mutex_unlock(&data->thermal_lock);
+	/* setting lag value between current temp and the threshold */
+	hi3660_thermal_set_lag(data->regs, sensor->id, HI3660_TEMP_LAG);
+
+	/* set interrupt threshold */
+	value = hi3660_thermal_temp_to_step(sensor->thres_temp);
+	hi3660_thermal_alarm_set(data->regs, sensor->id, value);
+
+	/* enable interrupt */
+	hi3660_thermal_alarm_clear(data->regs, sensor->id, 1);
+	hi3660_thermal_alarm_enable(data->regs, sensor->id, 1);
+
+	return 0;
 }
 
-static int hisi_thermal_get_temp(void *_sensor, int *temp)
+static int hi6220_thermal_probe(struct hisi_thermal_data *data)
 {
-	struct hisi_thermal_sensor *sensor = _sensor;
-	struct hisi_thermal_data *data = sensor->thermal;
+	struct platform_device *pdev = data->pdev;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int ret;
 
-	int sensor_id = -1, i;
-	long max_temp = 0;
+	data->get_temp = hi6220_thermal_get_temp;
+	data->enable_sensor = hi6220_thermal_enable_sensor;
+	data->disable_sensor = hi6220_thermal_disable_sensor;
+	data->irq_handler = hi6220_thermal_irq_handler;
 
-	*temp = hisi_thermal_get_sensor_temp(data, sensor);
-
-	sensor->sensor_temp = *temp;
-
-	for (i = 0; i < HISI_MAX_SENSORS; i++) {
-		if (!data->sensors[i].tzd)
-			continue;
-
-		if (data->sensors[i].sensor_temp >= max_temp) {
-			max_temp = data->sensors[i].sensor_temp;
-			sensor_id = i;
-		}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(data->regs)) {
+		dev_err(dev, "failed to get io address\n");
+		return PTR_ERR(data->regs);
 	}
 
-	/* If no sensor has been enabled, then skip to enable irq */
-	if (sensor_id == -1)
-		return 0;
-
-	mutex_lock(&data->thermal_lock);
-	data->irq_bind_sensor = sensor_id;
-	mutex_unlock(&data->thermal_lock);
-
-	dev_dbg(&data->pdev->dev, "id=%d, irq=%d, temp=%d, thres=%d\n",
-		sensor->id, data->irq_enabled, *temp, sensor->thres_temp);
-	/*
-	 * Bind irq to sensor for two cases:
-	 *   Reenable alarm IRQ if temperature below threshold;
-	 *   if irq has been enabled, always set it;
-	 */
-	if (data->irq_enabled) {
-		hisi_thermal_enable_bind_irq_sensor(data);
-		return 0;
+	data->clk = devm_clk_get(dev, "thermal_clk");
+	if (IS_ERR(data->clk)) {
+		ret = PTR_ERR(data->clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get thermal clk: %d\n", ret);
+		return ret;
 	}
 
-	if (max_temp < sensor->thres_temp) {
-		data->irq_enabled = true;
-		hisi_thermal_enable_bind_irq_sensor(data);
-		enable_irq(data->irq);
+	data->irq = platform_get_irq(pdev, 0);
+	if (data->irq < 0)
+		return data->irq;
+
+	data->sensor.id = HI6220_DEFAULT_SENSOR;
+
+	return 0;
+}
+
+static int hi3660_thermal_probe(struct hisi_thermal_data *data)
+{
+	struct platform_device *pdev = data->pdev;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+
+	data->get_temp = hi3660_thermal_get_temp;
+	data->enable_sensor = hi3660_thermal_enable_sensor;
+	data->disable_sensor = hi3660_thermal_disable_sensor;
+	data->irq_handler = hi3660_thermal_irq_handler;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(data->regs)) {
+		dev_err(dev, "failed to get io address\n");
+		return PTR_ERR(data->regs);
 	}
 
+	data->irq = platform_get_irq(pdev, 0);
+	if (data->irq < 0)
+		return data->irq;
+
+	data->sensor.id = HI3660_DEFAULT_SENSOR;
+
+	return 0;
+}
+
+static int hisi_thermal_get_temp(void *__data, int *temp)
+{
+	struct hisi_thermal_data *data = __data;
+	struct hisi_thermal_sensor *sensor = &data->sensor;
+
+	*temp = data->get_temp(data);
+
+	dev_dbg(&data->pdev->dev, "id=%d, temp=%d, thres=%d\n",
+		sensor->id, *temp, sensor->thres_temp);
+
 	return 0;
 }
 
@@ -210,35 +447,26 @@ static const struct thermal_zone_of_device_ops hisi_of_thermal_ops = {
 	.get_temp = hisi_thermal_get_temp,
 };
 
-static irqreturn_t hisi_thermal_alarm_irq(int irq, void *dev)
-{
-	struct hisi_thermal_data *data = dev;
-
-	disable_irq_nosync(irq);
-	data->irq_enabled = false;
-
-	return IRQ_WAKE_THREAD;
-}
-
 static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
 {
 	struct hisi_thermal_data *data = dev;
-	struct hisi_thermal_sensor *sensor;
-	int i;
+	struct hisi_thermal_sensor *sensor = &data->sensor;
+	int temp = 0;
 
-	mutex_lock(&data->thermal_lock);
-	sensor = &data->sensors[data->irq_bind_sensor];
+	data->irq_handler(data);
 
-	dev_crit(&data->pdev->dev, "THERMAL ALARM: T > %d\n",
-		 sensor->thres_temp / 1000);
-	mutex_unlock(&data->thermal_lock);
+	hisi_thermal_get_temp(data, &temp);
 
-	for (i = 0; i < HISI_MAX_SENSORS; i++) {
-		if (!data->sensors[i].tzd)
-			continue;
+	if (temp >= sensor->thres_temp) {
+		dev_crit(&data->pdev->dev, "THERMAL ALARM: %d > %d\n",
+			 temp, sensor->thres_temp);
 
-		thermal_zone_device_update(data->sensors[i].tzd,
+		thermal_zone_device_update(data->sensor.tzd,
 					   THERMAL_EVENT_UNSPECIFIED);
+
+	} else {
+		dev_crit(&data->pdev->dev, "THERMAL ALARM stopped: %d < %d\n",
+			 temp, sensor->thres_temp);
 	}
 
 	return IRQ_HANDLED;
@@ -246,17 +474,14 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
 
 static int hisi_thermal_register_sensor(struct platform_device *pdev,
 					struct hisi_thermal_data *data,
-					struct hisi_thermal_sensor *sensor,
-					int index)
+					struct hisi_thermal_sensor *sensor)
 {
 	int ret, i;
 	const struct thermal_trip *trip;
 
-	sensor->id = index;
-	sensor->thermal = data;
-
 	sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
-				sensor->id, sensor, &hisi_of_thermal_ops);
+							   sensor->id, data,
+							   &hisi_of_thermal_ops);
 	if (IS_ERR(sensor->tzd)) {
 		ret = PTR_ERR(sensor->tzd);
 		sensor->tzd = NULL;
@@ -278,7 +503,14 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
 }
 
 static const struct of_device_id of_hisi_thermal_match[] = {
-	{ .compatible = "hisilicon,tsensor" },
+	{
+		.compatible = "hisilicon,tsensor",
+		.data = hi6220_thermal_probe
+	},
+	{
+		.compatible = "hisilicon,hi3660-tsensor",
+		.data = hi3660_thermal_probe
+	},
 	{ /* end */ }
 };
 MODULE_DEVICE_TABLE(of, of_hisi_thermal_match);
@@ -295,88 +527,63 @@ static void hisi_thermal_toggle_sensor(struct hisi_thermal_sensor *sensor,
 static int hisi_thermal_probe(struct platform_device *pdev)
 {
 	struct hisi_thermal_data *data;
-	struct resource *res;
-	int i;
+	int const (*platform_probe)(struct hisi_thermal_data *);
+	struct device *dev = &pdev->dev;
 	int ret;
 
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	mutex_init(&data->thermal_lock);
 	data->pdev = pdev;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(data->regs)) {
-		dev_err(&pdev->dev, "failed to get io address\n");
-		return PTR_ERR(data->regs);
-	}
-
-	data->irq = platform_get_irq(pdev, 0);
-	if (data->irq < 0)
-		return data->irq;
-
-	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
-					hisi_thermal_alarm_irq,
-					hisi_thermal_alarm_irq_thread,
-					0, "hisi_thermal", data);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to request alarm irq: %d\n", ret);
-		return ret;
-	}
-
 	platform_set_drvdata(pdev, data);
 
-	data->clk = devm_clk_get(&pdev->dev, "thermal_clk");
-	if (IS_ERR(data->clk)) {
-		ret = PTR_ERR(data->clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"failed to get thermal clk: %d\n", ret);
-		return ret;
+	platform_probe = of_device_get_match_data(dev);
+	if (!platform_probe) {
+		dev_err(dev, "failed to get probe func\n");
+		return -EINVAL;
 	}
 
-	/* enable clock for thermal */
-	ret = clk_prepare_enable(data->clk);
+	ret = platform_probe(data);
+	if (ret)
+		return ret;
+
+	ret = hisi_thermal_register_sensor(pdev, data,
+					   &data->sensor);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+		dev_err(dev, "failed to register thermal sensor: %d\n", ret);
 		return ret;
 	}
 
-	hisi_thermal_enable_bind_irq_sensor(data);
-	irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED,
-			      &data->irq_enabled);
-
-	for (i = 0; i < HISI_MAX_SENSORS; ++i) {
-		ret = hisi_thermal_register_sensor(pdev, data,
-						   &data->sensors[i], i);
-		if (ret)
-			dev_err(&pdev->dev,
-				"failed to register thermal sensor: %d\n", ret);
-		else
-			hisi_thermal_toggle_sensor(&data->sensors[i], true);
+	ret = data->enable_sensor(data);
+	if (ret) {
+		dev_err(dev, "Failed to setup the sensor: %d\n", ret);
+		return ret;
 	}
 
+	if (data->irq) {
+		ret = devm_request_threaded_irq(dev, data->irq, NULL,
+				hisi_thermal_alarm_irq_thread,
+				IRQF_ONESHOT, "hisi_thermal", data);
+		if (ret < 0) {
+			dev_err(dev, "failed to request alarm irq: %d\n", ret);
+			return ret;
+		}
+	}
+
+	hisi_thermal_toggle_sensor(&data->sensor, true);
+
 	return 0;
 }
 
 static int hisi_thermal_remove(struct platform_device *pdev)
 {
 	struct hisi_thermal_data *data = platform_get_drvdata(pdev);
-	int i;
+	struct hisi_thermal_sensor *sensor = &data->sensor;
 
-	for (i = 0; i < HISI_MAX_SENSORS; i++) {
-		struct hisi_thermal_sensor *sensor = &data->sensors[i];
+	hisi_thermal_toggle_sensor(sensor, false);
 
-		if (!sensor->tzd)
-			continue;
-
-		hisi_thermal_toggle_sensor(sensor, false);
-	}
-
-	hisi_thermal_disable_sensor(data);
-	clk_disable_unprepare(data->clk);
+	data->disable_sensor(data);
 
 	return 0;
 }
@@ -386,10 +593,7 @@ static int hisi_thermal_suspend(struct device *dev)
 {
 	struct hisi_thermal_data *data = dev_get_drvdata(dev);
 
-	hisi_thermal_disable_sensor(data);
-	data->irq_enabled = false;
-
-	clk_disable_unprepare(data->clk);
+	data->disable_sensor(data);
 
 	return 0;
 }
@@ -397,16 +601,8 @@ static int hisi_thermal_suspend(struct device *dev)
 static int hisi_thermal_resume(struct device *dev)
 {
 	struct hisi_thermal_data *data = dev_get_drvdata(dev);
-	int ret;
 
-	ret = clk_prepare_enable(data->clk);
-	if (ret)
-		return ret;
-
-	data->irq_enabled = true;
-	hisi_thermal_enable_bind_irq_sensor(data);
-
-	return 0;
+	return data->enable_sensor(data);
 }
 #endif
 
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 4798b4b1fd77..e7d4ffc3de7f 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/thermal.h>
 #include <linux/types.h>
+#include <linux/nvmem-consumer.h>
 
 #define REG_SET		0x4
 #define REG_CLR		0x8
@@ -94,7 +95,7 @@ struct imx_thermal_data {
 	struct thermal_cooling_device *cdev;
 	enum thermal_device_mode mode;
 	struct regmap *tempmon;
-	u32 c1, c2; /* See formula in imx_get_sensor_data() */
+	u32 c1, c2; /* See formula in imx_init_calib() */
 	int temp_passive;
 	int temp_critical;
 	int temp_max;
@@ -177,7 +178,7 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT;
 
-	/* See imx_get_sensor_data() for formula derivation */
+	/* See imx_init_calib() for formula derivation */
 	*temp = data->c2 - n_meas * data->c1;
 
 	/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
@@ -346,29 +347,12 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.set_trip_temp = imx_set_trip_temp,
 };
 
-static int imx_get_sensor_data(struct platform_device *pdev)
+static int imx_init_calib(struct platform_device *pdev, u32 val)
 {
 	struct imx_thermal_data *data = platform_get_drvdata(pdev);
-	struct regmap *map;
 	int t1, n1;
-	int ret;
-	u32 val;
 	u64 temp64;
 
-	map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-					      "fsl,tempmon-data");
-	if (IS_ERR(map)) {
-		ret = PTR_ERR(map);
-		dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
-		return ret;
-	}
-
-	ret = regmap_read(map, OCOTP_ANA1, &val);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
-		return ret;
-	}
-
 	if (val == 0 || val == ~0) {
 		dev_err(&pdev->dev, "invalid sensor calibration data\n");
 		return -EINVAL;
@@ -405,12 +389,12 @@ static int imx_get_sensor_data(struct platform_device *pdev)
 	data->c1 = temp64;
 	data->c2 = n1 * data->c1 + 1000 * t1;
 
-	/* use OTP for thermal grade */
-	ret = regmap_read(map, OCOTP_MEM0, &val);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to read temp grade: %d\n", ret);
-		return ret;
-	}
+	return 0;
+}
+
+static void imx_init_temp_grade(struct platform_device *pdev, u32 val)
+{
+	struct imx_thermal_data *data = platform_get_drvdata(pdev);
 
 	/* The maximum die temp is specified by the Temperature Grade */
 	switch ((val >> 6) & 0x3) {
@@ -438,6 +422,55 @@ static int imx_get_sensor_data(struct platform_device *pdev)
 	 */
 	data->temp_critical = data->temp_max - (1000 * 5);
 	data->temp_passive = data->temp_max - (1000 * 10);
+}
+
+static int imx_init_from_tempmon_data(struct platform_device *pdev)
+{
+	struct regmap *map;
+	int ret;
+	u32 val;
+
+	map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+					      "fsl,tempmon-data");
+	if (IS_ERR(map)) {
+		ret = PTR_ERR(map);
+		dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(map, OCOTP_ANA1, &val);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
+		return ret;
+	}
+	ret = imx_init_calib(pdev, val);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(map, OCOTP_MEM0, &val);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
+		return ret;
+	}
+	imx_init_temp_grade(pdev, val);
+
+	return 0;
+}
+
+static int imx_init_from_nvmem_cells(struct platform_device *pdev)
+{
+	int ret;
+	u32 val;
+
+	ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val);
+	if (ret)
+		return ret;
+	imx_init_calib(pdev, val);
+
+	ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val);
+	if (ret)
+		return ret;
+	imx_init_temp_grade(pdev, val);
 
 	return 0;
 }
@@ -514,10 +547,21 @@ static int imx_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, data);
 
-	ret = imx_get_sensor_data(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to get sensor data\n");
-		return ret;
+	if (of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) {
+		ret = imx_init_from_nvmem_cells(pdev);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+		if (ret) {
+			dev_err(&pdev->dev, "failed to init from nvmem: %d\n",
+				ret);
+			return ret;
+		}
+	} else {
+		ret = imx_init_from_tempmon_data(pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to init from from fsl,tempmon-data\n");
+			return ret;
+		}
 	}
 
 	/* Make sure sensor is in known good state for measurements */
diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/int340x_thermal/processor_thermal_device.c
index f02341f7134d..80bbf9ce2fb6 100644
--- a/drivers/thermal/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/int340x_thermal/processor_thermal_device.c
@@ -30,6 +30,10 @@
 /* Skylake thermal reporting device */
 #define PCI_DEVICE_ID_PROC_SKL_THERMAL	0x1903
 
+/* CannonLake thermal reporting device */
+#define PCI_DEVICE_ID_PROC_CNL_THERMAL	0x5a03
+#define PCI_DEVICE_ID_PROC_CFL_THERMAL	0x3E83
+
 /* Braswell thermal reporting device */
 #define PCI_DEVICE_ID_PROC_BSW_THERMAL	0x22DC
 
@@ -461,6 +465,8 @@ static const struct pci_device_id proc_thermal_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXT1_THERMAL)},
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTX_THERMAL)},
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_BXTP_THERMAL)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_CNL_THERMAL)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_PROC_CFL_THERMAL)},
 	{ 0, },
 };
 
diff --git a/drivers/thermal/intel_bxt_pmic_thermal.c b/drivers/thermal/intel_bxt_pmic_thermal.c
index ef6b32242ccb..94cfd0064c43 100644
--- a/drivers/thermal/intel_bxt_pmic_thermal.c
+++ b/drivers/thermal/intel_bxt_pmic_thermal.c
@@ -166,7 +166,7 @@ static irqreturn_t pmic_thermal_irq_handler(int irq, void *data)
 	struct pmic_thermal_data *td;
 	struct intel_soc_pmic *pmic;
 	struct regmap *regmap;
-	u8 reg_val, mask, irq_stat, trip;
+	u8 reg_val, mask, irq_stat;
 	u16 reg, evt_stat_reg;
 	int i, j, ret;
 
@@ -201,7 +201,6 @@ static irqreturn_t pmic_thermal_irq_handler(int irq, void *data)
 			if (regmap_read(regmap, evt_stat_reg, &ret))
 				return IRQ_HANDLED;
 
-			trip = td->maps[i].trip_config[j].trip_num;
 			tzd = thermal_zone_get_zone_by_name(td->maps[i].handle);
 			if (!IS_ERR(tzd))
 				thermal_zone_device_update(tzd,
diff --git a/drivers/thermal/intel_pch_thermal.c b/drivers/thermal/intel_pch_thermal.c
index c60b1cfcc64e..8a7f69b4b022 100644
--- a/drivers/thermal/intel_pch_thermal.c
+++ b/drivers/thermal/intel_pch_thermal.c
@@ -30,6 +30,8 @@
 #define PCH_THERMAL_DID_WPT	0x9CA4 /* Wildcat Point */
 #define PCH_THERMAL_DID_SKL	0x9D31 /* Skylake PCH */
 #define PCH_THERMAL_DID_SKL_H	0xA131 /* Skylake PCH 100 series */
+#define PCH_THERMAL_DID_CNL	0x9Df9 /* CNL PCH */
+#define PCH_THERMAL_DID_CNL_H	0xA379 /* CNL-H PCH */
 
 /* Wildcat Point-LP  PCH Thermal registers */
 #define WPT_TEMP	0x0000	/* Temperature */
@@ -278,6 +280,7 @@ enum board_ids {
 	board_hsw,
 	board_wpt,
 	board_skl,
+	board_cnl,
 };
 
 static const struct board_info {
@@ -296,6 +299,10 @@ static const struct board_info {
 		.name = "pch_skylake",
 		.ops = &pch_dev_ops_wpt,
 	},
+	[board_cnl] = {
+		.name = "pch_cannonlake",
+		.ops = &pch_dev_ops_wpt,
+	},
 };
 
 static int intel_pch_thermal_probe(struct pci_dev *pdev,
@@ -398,6 +405,10 @@ static const struct pci_device_id intel_pch_thermal_id[] = {
 		.driver_data = board_skl, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_SKL_H),
 		.driver_data = board_skl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL),
+		.driver_data = board_cnl, },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCH_THERMAL_DID_CNL_H),
+		.driver_data = board_cnl, },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, intel_pch_thermal_id);
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index d718cd179ddb..4540e892b61d 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -675,13 +675,13 @@ static int __init powerclamp_probe(void)
 {
 
 	if (!x86_match_cpu(intel_powerclamp_ids)) {
-		pr_err("CPU does not support MWAIT");
+		pr_err("CPU does not support MWAIT\n");
 		return -ENODEV;
 	}
 
 	/* The goal for idle time alignment is to achieve package cstate. */
 	if (!has_pkg_state_counter()) {
-		pr_info("No package C-state available");
+		pr_info("No package C-state available\n");
 		return -ENODEV;
 	}
 
diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom-spmi-temp-alarm.c
index f50241962ad2..95f987d5aa71 100644
--- a/drivers/thermal/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom-spmi-temp-alarm.c
@@ -125,7 +125,7 @@ static int qpnp_tm_get_temp(void *data, int *temp)
 	if (!temp)
 		return -EINVAL;
 
-	if (IS_ERR(chip->adc)) {
+	if (!chip->adc) {
 		ret = qpnp_tm_update_temp_no_adc(chip);
 		if (ret < 0)
 			return ret;
@@ -224,67 +224,53 @@ static int qpnp_tm_probe(struct platform_device *pdev)
 		return irq;
 
 	/* ADC based measurements are optional */
-	chip->adc = iio_channel_get(&pdev->dev, "thermal");
-	if (PTR_ERR(chip->adc) == -EPROBE_DEFER)
-		return PTR_ERR(chip->adc);
+	chip->adc = devm_iio_channel_get(&pdev->dev, "thermal");
+	if (IS_ERR(chip->adc)) {
+		ret = PTR_ERR(chip->adc);
+		chip->adc = NULL;
+		if (ret == -EPROBE_DEFER)
+			return ret;
+	}
 
 	chip->base = res;
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not read type\n");
-		goto fail;
+		return ret;
 	}
 
 	ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not read subtype\n");
-		goto fail;
+		return ret;
 	}
 
 	if (type != QPNP_TM_TYPE || subtype != QPNP_TM_SUBTYPE) {
 		dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
 			type, subtype);
-		ret = -ENODEV;
-		goto fail;
+		return -ENODEV;
 	}
 
 	ret = qpnp_tm_init(chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "init failed\n");
-		goto fail;
+		return ret;
 	}
 
 	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr,
 					IRQF_ONESHOT, node->name, chip);
 	if (ret < 0)
-		goto fail;
+		return ret;
 
 	chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
 							&qpnp_tm_sensor_ops);
 	if (IS_ERR(chip->tz_dev)) {
 		dev_err(&pdev->dev, "failed to register sensor\n");
-		ret = PTR_ERR(chip->tz_dev);
-		goto fail;
+		return PTR_ERR(chip->tz_dev);
 	}
 
 	return 0;
-
-fail:
-	if (!IS_ERR(chip->adc))
-		iio_channel_release(chip->adc);
-
-	return ret;
-}
-
-static int qpnp_tm_remove(struct platform_device *pdev)
-{
-	struct qpnp_tm_chip *chip = dev_get_drvdata(&pdev->dev);
-
-	if (!IS_ERR(chip->adc))
-		iio_channel_release(chip->adc);
-
-	return 0;
 }
 
 static const struct of_device_id qpnp_tm_match_table[] = {
@@ -299,7 +285,6 @@ static struct platform_driver qpnp_tm_driver = {
 		.of_match_table = qpnp_tm_match_table,
 	},
 	.probe  = qpnp_tm_probe,
-	.remove = qpnp_tm_remove,
 };
 module_platform_driver(qpnp_tm_driver);
 
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 203aca44a2bb..561a0a332208 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/spinlock.h>
+#include <linux/sys_soc.h>
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
@@ -90,10 +91,6 @@ struct rcar_gen3_thermal_priv {
 	struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
 	unsigned int num_tscs;
 	spinlock_t lock; /* Protect interrupts on and off */
-	const struct rcar_gen3_thermal_data *data;
-};
-
-struct rcar_gen3_thermal_data {
 	void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc);
 };
 
@@ -278,7 +275,12 @@ static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void r8a7795_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
+static const struct soc_device_attribute r8a7795es1[] = {
+	{ .soc_id = "r8a7795", .revision = "ES1.*" },
+	{ /* sentinel */ }
+};
+
+static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
 {
 	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  CTSR_THBGR);
 	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  0x0);
@@ -303,7 +305,7 @@ static void r8a7795_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
 	usleep_range(1000, 2000);
 }
 
-static void r8a7796_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
+static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
 {
 	u32 reg_val;
 
@@ -324,17 +326,9 @@ static void r8a7796_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
 	usleep_range(1000, 2000);
 }
 
-static const struct rcar_gen3_thermal_data r8a7795_data = {
-	.thermal_init = r8a7795_thermal_init,
-};
-
-static const struct rcar_gen3_thermal_data r8a7796_data = {
-	.thermal_init = r8a7796_thermal_init,
-};
-
 static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
-	{ .compatible = "renesas,r8a7795-thermal", .data = &r8a7795_data},
-	{ .compatible = "renesas,r8a7796-thermal", .data = &r8a7796_data},
+	{ .compatible = "renesas,r8a7795-thermal", },
+	{ .compatible = "renesas,r8a7796-thermal", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
@@ -371,7 +365,9 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	priv->data = of_device_get_match_data(dev);
+	priv->thermal_init = rcar_gen3_thermal_init;
+	if (soc_device_match(r8a7795es1))
+		priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1;
 
 	spin_lock_init(&priv->lock);
 
@@ -423,7 +419,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 
 		priv->tscs[i] = tsc;
 
-		priv->data->thermal_init(tsc);
+		priv->thermal_init(tsc);
 		rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]);
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
@@ -476,7 +472,7 @@ static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
 	for (i = 0; i < priv->num_tscs; i++) {
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
-		priv->data->thermal_init(tsc);
+		priv->thermal_init(tsc);
 		rcar_gen3_thermal_set_trips(tsc, tsc->low, tsc->high);
 	}
 
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 206035139110..f36375d5a16c 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -242,6 +242,45 @@ struct tsadc_table {
 	int temp;
 };
 
+static const struct tsadc_table rv1108_table[] = {
+	{0, -40000},
+	{374, -40000},
+	{382, -35000},
+	{389, -30000},
+	{397, -25000},
+	{405, -20000},
+	{413, -15000},
+	{421, -10000},
+	{429, -5000},
+	{436, 0},
+	{444, 5000},
+	{452, 10000},
+	{460, 15000},
+	{468, 20000},
+	{476, 25000},
+	{483, 30000},
+	{491, 35000},
+	{499, 40000},
+	{507, 45000},
+	{515, 50000},
+	{523, 55000},
+	{531, 60000},
+	{539, 65000},
+	{547, 70000},
+	{555, 75000},
+	{562, 80000},
+	{570, 85000},
+	{578, 90000},
+	{586, 95000},
+	{594, 100000},
+	{602, 105000},
+	{610, 110000},
+	{618, 115000},
+	{626, 120000},
+	{634, 125000},
+	{TSADCV2_DATA_MASK, 125000},
+};
+
 static const struct tsadc_table rk3228_code_table[] = {
 	{0, -40000},
 	{588, -40000},
@@ -779,6 +818,30 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
 	writel_relaxed(val, regs + TSADCV2_INT_EN);
 }
 
+static const struct rockchip_tsadc_chip rv1108_tsadc_data = {
+	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+	.chn_num = 1, /* one channel for tsadc */
+
+	.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+	.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+	.tshut_temp = 95000,
+
+	.initialize = rk_tsadcv2_initialize,
+	.irq_ack = rk_tsadcv3_irq_ack,
+	.control = rk_tsadcv3_control,
+	.get_temp = rk_tsadcv2_get_temp,
+	.set_alarm_temp = rk_tsadcv2_alarm_temp,
+	.set_tshut_temp = rk_tsadcv2_tshut_temp,
+	.set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+	.table = {
+		.id = rv1108_table,
+		.length = ARRAY_SIZE(rv1108_table),
+		.data_mask = TSADCV2_DATA_MASK,
+		.mode = ADC_INCREMENT,
+	},
+};
+
 static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
 	.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
 	.chn_num = 1, /* one channel for tsadc */
@@ -927,6 +990,10 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
 };
 
 static const struct of_device_id of_rockchip_thermal_match[] = {
+	{
+		.compatible = "rockchip,rv1108-tsadc",
+		.data = (void *)&rv1108_tsadc_data,
+	},
 	{
 		.compatible = "rockchip,rk3228-tsadc",
 		.data = (void *)&rk3228_tsadc_data,
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index be95826631b7..ee047ca43084 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -31,8 +31,7 @@
  * If the temperature is higher than a trip point,
  *    a. if the trend is THERMAL_TREND_RAISING, use higher cooling
  *       state for this trip point
- *    b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
- *       state for this trip point
+ *    b. if the trend is THERMAL_TREND_DROPPING, do nothing
  *    c. if the trend is THERMAL_TREND_RAISE_FULL, use upper limit
  *       for this trip point
  *    d. if the trend is THERMAL_TREND_DROP_FULL, use lower limit
@@ -94,9 +93,11 @@ static unsigned long get_target_state(struct thermal_instance *instance,
 			if (!throttle)
 				next_target = THERMAL_NO_TARGET;
 		} else {
-			next_target = cur_state - 1;
-			if (next_target > instance->upper)
-				next_target = instance->upper;
+			if (!throttle) {
+				next_target = cur_state - 1;
+				if (next_target > instance->upper)
+					next_target = instance->upper;
+			}
 		}
 		break;
 	case THERMAL_TREND_DROP_FULL:
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 7d2db23d71a3..075db1de5e53 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -483,7 +483,7 @@ static int throttrip_program(struct device *dev,
 	unsigned int throt;
 	u32 r, reg_off;
 
-	if (!dev || !sg || !stc || !stc->init)
+	if (!sg || !stc || !stc->init)
 		return -EINVAL;
 
 	temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
diff --git a/drivers/thermal/thermal-generic-adc.c b/drivers/thermal/thermal-generic-adc.c
index 73f55d6a1721..46d3005335c7 100644
--- a/drivers/thermal/thermal-generic-adc.c
+++ b/drivers/thermal/thermal-generic-adc.c
@@ -126,37 +126,22 @@ static int gadc_thermal_probe(struct platform_device *pdev)
 	gti->dev = &pdev->dev;
 	platform_set_drvdata(pdev, gti);
 
-	gti->channel = iio_channel_get(&pdev->dev, "sensor-channel");
+	gti->channel = devm_iio_channel_get(&pdev->dev, "sensor-channel");
 	if (IS_ERR(gti->channel)) {
 		ret = PTR_ERR(gti->channel);
 		dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
 		return ret;
 	}
 
-	gti->tz_dev = thermal_zone_of_sensor_register(&pdev->dev, 0,
-						      gti, &gadc_thermal_ops);
+	gti->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, gti,
+							   &gadc_thermal_ops);
 	if (IS_ERR(gti->tz_dev)) {
 		ret = PTR_ERR(gti->tz_dev);
 		dev_err(&pdev->dev, "Thermal zone sensor register failed: %d\n",
 			ret);
-		goto sensor_fail;
+		return ret;
 	}
 
-	return 0;
-
-sensor_fail:
-	iio_channel_release(gti->channel);
-
-	return ret;
-}
-
-static int gadc_thermal_remove(struct platform_device *pdev)
-{
-	struct gadc_thermal_info *gti = platform_get_drvdata(pdev);
-
-	thermal_zone_of_sensor_unregister(&pdev->dev, gti->tz_dev);
-	iio_channel_release(gti->channel);
-
 	return 0;
 }
 
@@ -172,7 +157,6 @@ static struct platform_driver gadc_thermal_driver = {
 		.of_match_table = of_adc_thermal_match,
 	},
 	.probe = gadc_thermal_probe,
-	.remove = gadc_thermal_remove,
 };
 
 module_platform_driver(gadc_thermal_driver);
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index c211a8e4a210..b4f981daeaf2 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -278,7 +278,8 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
 
 	if (data) {
 		cpufreq_cooling_unregister(data->cool_dev);
-		cpufreq_cpu_put(data->policy);
+		if (data->policy)
+			cpufreq_cpu_put(data->policy);
 	}
 
 	return 0;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index fd5b959c753c..8c5302374eaa 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -488,7 +488,7 @@ static inline int power_actor_set_power(struct thermal_cooling_device *cdev,
 static inline struct thermal_zone_device *thermal_zone_device_register(
 	const char *type, int trips, int mask, void *devdata,
 	struct thermal_zone_device_ops *ops,
-	const struct thermal_zone_params *tzp,
+	struct thermal_zone_params *tzp,
 	int passive_delay, int polling_delay)
 { return ERR_PTR(-ENODEV); }
 static inline void thermal_zone_device_unregister(
diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile
index 21169322baea..735a510230c3 100644
--- a/tools/thermal/tmon/Makefile
+++ b/tools/thermal/tmon/Makefile
@@ -1,10 +1,16 @@
 # SPDX-License-Identifier: GPL-2.0
+# We need this for the "cc-option" macro.
+include ../../../scripts/Kbuild.include
+
 VERSION = 1.0
 
 BINDIR=usr/bin
 WARNFLAGS=-Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int
-CFLAGS+= -O1 ${WARNFLAGS} -fstack-protector
-CC=$(CROSS_COMPILE)gcc
+CFLAGS+= -O1 ${WARNFLAGS}
+# Add "-fstack-protector" only if toolchain supports it.
+CFLAGS+= $(call cc-option,-fstack-protector)
+CC?= $(CROSS_COMPILE)gcc
+PKG_CONFIG?= pkg-config
 
 CFLAGS+=-D VERSION=\"$(VERSION)\"
 LDFLAGS+=
@@ -19,12 +25,12 @@ STATIC := --static
 endif
 
 TMON_LIBS=-lm -lpthread
-TMON_LIBS += $(shell pkg-config --libs $(STATIC) panelw ncursesw 2> /dev/null || \
-		     pkg-config --libs $(STATIC) panel ncurses 2> /dev/null || \
+TMON_LIBS += $(shell $(PKG_CONFIG) --libs $(STATIC) panelw ncursesw 2> /dev/null || \
+		     $(PKG_CONFIG) --libs $(STATIC) panel ncurses 2> /dev/null || \
 		     echo -lpanel -lncurses)
 
-CFLAGS    += $(shell pkg-config --cflags $(STATIC) panelw ncursesw 2> /dev/null || \
-		     pkg-config --cflags $(STATIC) panel ncurses 2> /dev/null)
+CFLAGS    += $(shell $(PKG_CONFIG) --cflags $(STATIC) panelw ncursesw 2> /dev/null || \
+		     $(PKG_CONFIG) --cflags $(STATIC) panel ncurses 2> /dev/null)
 
 OBJS = tmon.o tui.o sysfs.o pid.o
 OBJS +=