ALSA: firewire-motu: add support for MOTU 896

MOTU 896 is a second model in MOTU FireWire series, produced in 2001. This
model consists of three chips:

 * Texas Instruments TSB41AB2 (Physical layer for IEEE 1394 bus)
 * Philips Semiconductors PDI 1394L21BE (Link layer for IEEE 1394 bus and
   packet processing layer)
 * QuickLogic QuickRAM QL4016 (Data block processing layer and digital
   signal processing)

This commit adds a support for the model, with its unique protocol as
version 1. The features of this protocol are:

 * no MIDI support.
 * Rx packets have no data chunks for control and status messages.
 * Tx packets have 2 bytes for control and status messages in the end of
   each data block.
 * The most of settings are represented in bit flag in one quadlet address
   (0x'ffff'f000'0b14).
 * It's selectable to use signal on optical interface, however the device
   has no register specific to it. The state has effect just to whether
   to exclude differed data chunks.
 * The internal multiplexer is not configured by software.

Just after powering on, the device has a quirk to fail handling
transaction. I recommend users to connect the device enough after powering
on.

$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04102814  bus_info_length 4, crc_length 16, crc 10260
404  31333934  bus_name "1394"
408  20001000  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c  0001f200  company_id 0001f2     |
410  0000d645  device_id 000000d645  | EUI-64 0001f2000000d645

               root directory
               -----------------------------------------------------------------
414  0004c65c  directory_length 4, crc 50780
418  030001f2  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  0003ab34  directory_length 3, crc 43828
42c  120001f2  specifier id
430  13000002  version
434  17102801  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  0002057d  leaf_length 2, crc 1405
43c  0001f200  company_id 0001f2     |
440  0000d645  device_id 000000d645  | EUI-64 0001f2000000d645

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210616082847.124688-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Takashi Sakamoto 2021-06-16 17:28:47 +09:00 committed by Takashi Iwai
parent d13d6b284d
commit b431f16f16
4 changed files with 218 additions and 0 deletions

View file

@ -166,6 +166,7 @@ config SND_FIREWIRE_MOTU
help
Say Y here to enable support for FireWire devices which MOTU produced:
* 828
* 896
* 828mk2
* Traveler
* Ultralite

View file

@ -53,6 +53,62 @@
#define CLK_828_STATUS_FLAG_SRC_SPDIF_ON_OPT_OR_COAX 0x00000002
#define CLK_828_STATUS_FLAG_SRC_ADAT_ON_OPT_OR_DSUB 0x00000001
// Status register for MOTU 896 (0x'ffff'f000'0b14).
//
// 0x20000000: fetch PCM frames from communication IC to DAC.
// 0x08000000: speed of word clock signal output on BNC interface.
// 0x00000000: follow to system clock.
// 0x08000000: half of system clock.
// 0x01000000: Route main output to headphone output.
// 0x00ffff00: input to monitor.
// 0x00000000: none
// 0x00004800: analog-1/2
// 0x00005a00: analog-3/4
// 0x00006c00: analog-5/6
// 0x00007e00: analog-7/8
// 0x00104800: AES/EBU-1/2
// 0x00004000: analog-1
// 0x00004900: analog-2
// 0x00005200: analog-3
// 0x00005b00: analog-4
// 0x00006400: analog-5
// 0x00006d00: analog-6
// 0x00007600: analog-7
// 0x00007f00: analog-8
// 0x00104000: AES/EBU-1
// 0x00104900: AES/EBU-2
// 0x00000060: sample rate conversin for AES/EBU input/output.
// 0x00000000: None
// 0x00000020: input signal is converted to system rate
// 0x00000040: output is slave to input, ignoring system rate
// 0x00000060: output is double rate than system rate
// 0x00000018: nominal rate of sampling clock.
// 0x00000000: 44.1 kHz
// 0x00000008: 48.0 kHz
// 0x00000010: 88.2 kHz
// 0x00000018: 96.0 kHz
// 0x00000007: source of sampling clock.
// 0x00000000: internal
// 0x00000001: ADAT on optical interface
// 0x00000002: AES/EBU on XLR
// 0x00000004: word clock on BNC
// 0x00000005: ADAT on Dsub 9pin
#define CLK_896_STATUS_OFFSET 0x0b14
#define CLK_896_STATUS_FLAG_FETCH_ENABLE 0x20000000
#define CLK_896_STATUS_FLAG_MAIN_TO_HP 0x01000000
#define CLK_896_STATUS_MASK_SRC 0x00000007
#define CLK_896_STATUS_FLAG_SRC_INTERNAL 0x00000000
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT 0x00000001
#define CLK_896_STATUS_FLAG_SRC_AESEBU 0x00000002
#define CLK_896_STATUS_FLAG_SRC_WORD 0x00000004
#define CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB 0x00000005
#define CLK_896_STATUS_MASK_RATE 0x00000018
#define CLK_896_STATUS_FLAG_RATE_44100 0x00000000
#define CLK_896_STATUS_FLAG_RATE_48000 0x00000008
#define CLK_896_STATUS_FLAG_RATE_88200 0x00000010
#define CLK_896_STATUS_FLAG_RATE_96000 0x00000018
static void parse_clock_rate_828(u32 data, unsigned int *rate)
{
if (data & CLK_828_STATUS_FLAG_RATE_48000)
@ -74,10 +130,45 @@ static int get_clock_rate_828(struct snd_motu *motu, unsigned int *rate)
return 0;
}
static int parse_clock_rate_896(u32 data, unsigned int *rate)
{
switch (data & CLK_896_STATUS_MASK_RATE) {
case CLK_896_STATUS_FLAG_RATE_44100:
*rate = 44100;
break;
case CLK_896_STATUS_FLAG_RATE_48000:
*rate = 48000;
break;
case CLK_896_STATUS_FLAG_RATE_88200:
*rate = 88200;
break;
case CLK_896_STATUS_FLAG_RATE_96000:
*rate = 96000;
break;
default:
return -ENXIO;
}
return 0;
}
static int get_clock_rate_896(struct snd_motu *motu, unsigned int *rate)
{
__be32 reg;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
return parse_clock_rate_896(be32_to_cpu(reg), rate);
}
int snd_motu_protocol_v1_get_clock_rate(struct snd_motu *motu, unsigned int *rate)
{
if (motu->spec == &snd_motu_spec_828)
return get_clock_rate_828(motu, rate);
else if (motu->spec == &snd_motu_spec_896)
return get_clock_rate_896(motu, rate);
else
return -ENXIO;
}
@ -101,10 +192,48 @@ static int set_clock_rate_828(struct snd_motu *motu, unsigned int rate)
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
}
static int set_clock_rate_896(struct snd_motu *motu, unsigned int rate)
{
unsigned int flag;
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg);
switch (rate) {
case 44100:
flag = CLK_896_STATUS_FLAG_RATE_44100;
break;
case 48000:
flag = CLK_896_STATUS_FLAG_RATE_48000;
break;
case 88200:
flag = CLK_896_STATUS_FLAG_RATE_88200;
break;
case 96000:
flag = CLK_896_STATUS_FLAG_RATE_96000;
break;
default:
return -EINVAL;
}
data &= ~CLK_896_STATUS_MASK_RATE;
data |= flag;
reg = cpu_to_be32(data);
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
}
int snd_motu_protocol_v1_set_clock_rate(struct snd_motu *motu, unsigned int rate)
{
if (motu->spec == &snd_motu_spec_828)
return set_clock_rate_828(motu, rate);
else if (motu->spec == &snd_motu_spec_896)
return set_clock_rate_896(motu, rate);
else
return -ENXIO;
}
@ -137,10 +266,46 @@ static int get_clock_source_828(struct snd_motu *motu, enum snd_motu_clock_sourc
return 0;
}
static int get_clock_source_896(struct snd_motu *motu, enum snd_motu_clock_source *src)
{
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg);
switch (data & CLK_896_STATUS_MASK_SRC) {
case CLK_896_STATUS_FLAG_SRC_INTERNAL:
*src = SND_MOTU_CLOCK_SOURCE_INTERNAL;
break;
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT:
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_OPT;
break;
case CLK_896_STATUS_FLAG_SRC_AESEBU:
*src = SND_MOTU_CLOCK_SOURCE_AESEBU_ON_XLR;
break;
case CLK_896_STATUS_FLAG_SRC_WORD:
*src = SND_MOTU_CLOCK_SOURCE_WORD_ON_BNC;
break;
case CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB:
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_DSUB;
break;
default:
return -ENXIO;
}
return 0;
}
int snd_motu_protocol_v1_get_clock_source(struct snd_motu *motu, enum snd_motu_clock_source *src)
{
if (motu->spec == &snd_motu_spec_828)
return get_clock_source_828(motu, src);
else if (motu->spec == &snd_motu_spec_896)
return get_clock_source_896(motu, src);
else
return -ENXIO;
}
@ -169,10 +334,31 @@ static int switch_fetching_mode_828(struct snd_motu *motu, bool enable)
return snd_motu_transaction_write(motu, CLK_828_STATUS_OFFSET, &reg, sizeof(reg));
}
static int switch_fetching_mode_896(struct snd_motu *motu, bool enable)
{
__be32 reg;
u32 data;
int err;
err = snd_motu_transaction_read(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
if (err < 0)
return err;
data = be32_to_cpu(reg);
data &= ~(CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_MAIN_TO_HP);
if (enable)
data |= (CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_MAIN_TO_HP);
reg = cpu_to_be32(data);
return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, &reg, sizeof(reg));
}
int snd_motu_protocol_v1_switch_fetching_mode(struct snd_motu *motu, bool enable)
{
if (motu->spec == &snd_motu_spec_828)
return switch_fetching_mode_828(motu, enable);
else if (motu->spec == &snd_motu_spec_896)
return switch_fetching_mode_896(motu, enable);
else
return -ENXIO;
}
@ -204,6 +390,27 @@ static int detect_packet_formats_828(struct snd_motu *motu)
return 0;
}
static int detect_packet_formats_896(struct snd_motu *motu)
{
// 24bit PCM frames follow to source packet header without message chunk.
motu->tx_packet_formats.pcm_byte_offset = 4;
motu->rx_packet_formats.pcm_byte_offset = 4;
// No message chunk in data block.
motu->tx_packet_formats.msg_chunks = 0;
motu->rx_packet_formats.msg_chunks = 0;
// Always enable optical interface for ADAT signal since the device have no registers
// to refer to current configuration.
motu->tx_packet_formats.pcm_chunks[0] += 8;
motu->tx_packet_formats.pcm_chunks[1] += 8;
motu->rx_packet_formats.pcm_chunks[0] += 8;
motu->rx_packet_formats.pcm_chunks[1] += 8;
return 0;
}
int snd_motu_protocol_v1_cache_packet_formats(struct snd_motu *motu)
{
memcpy(motu->tx_packet_formats.pcm_chunks, motu->spec->tx_fixed_pcm_chunks,
@ -213,6 +420,8 @@ int snd_motu_protocol_v1_cache_packet_formats(struct snd_motu *motu)
if (motu->spec == &snd_motu_spec_828)
return detect_packet_formats_828(motu);
else if (motu->spec == &snd_motu_spec_896)
return detect_packet_formats_896(motu);
else
return 0;
}
@ -223,3 +432,9 @@ const struct snd_motu_spec snd_motu_spec_828 = {
.tx_fixed_pcm_chunks = {10, 0, 0},
.rx_fixed_pcm_chunks = {10, 0, 0},
};
const struct snd_motu_spec snd_motu_spec_896 = {
.name = "896",
.tx_fixed_pcm_chunks = {10, 10, 0},
.rx_fixed_pcm_chunks = {10, 10, 0},
};

View file

@ -151,6 +151,7 @@ static void motu_bus_update(struct fw_unit *unit)
static const struct ieee1394_device_id motu_id_table[] = {
SND_MOTU_DEV_ENTRY(0x000001, &snd_motu_spec_828),
SND_MOTU_DEV_ENTRY(0x000002, &snd_motu_spec_896),
SND_MOTU_DEV_ENTRY(0x000003, &snd_motu_spec_828mk2),
SND_MOTU_DEV_ENTRY(0x000009, &snd_motu_spec_traveler),
SND_MOTU_DEV_ENTRY(0x00000d, &snd_motu_spec_ultralite),

View file

@ -123,6 +123,7 @@ struct snd_motu_spec {
};
extern const struct snd_motu_spec snd_motu_spec_828;
extern const struct snd_motu_spec snd_motu_spec_896;
extern const struct snd_motu_spec snd_motu_spec_828mk2;
extern const struct snd_motu_spec snd_motu_spec_traveler;