diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml new file mode 100644 index 000000000000..f9ffe3d6f957 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77843-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + + ports: + $ref: /schemas/graph.yaml#/properties/port + description: + Any connector to the data bus of this controller should be modelled using + the OF graph bindings specified + properties: + port: + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - connector + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml new file mode 100644 index 000000000000..86a0005cf156 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + There are two LED outputs available - FLED1 and FLED2. Each of them can + control a separate LED or they can be connected together to double the + maximum current for a single connected LED. One LED is represented by one + child node. + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77693-led + + maxim,boost-mode: + description: + In boost mode the device can produce up to 1.2A of total current on both + outputs. The maximum current on each output is reduced to 625mA then. If + not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in + case both current sources are used. + See LEDS_BOOST_* in include/dt-bindings/leds/common.h. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + + maxim,boost-mvout: + description: | + Output voltage of the boost module in millivolts. + Valid values: 3300 - 5500, step by 25 (rounded down) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 3300 + maximum: 5500 + default: 3300 + + maxim,mvsys-min: + description: | + Low input voltage level in millivolts. Flash is not fired if chip + estimates that system voltage could drop below this level due to flash + power consumption. + Valid values: 2400 - 3400, step by 33 (rounded down) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2400 + maximum: 3400 + default: 2400 + +patternProperties: + "^([a-z]+-)?led[01]?$": + type: object + $ref: common.yaml# + unevaluatedProperties: false + + properties: + led-sources: + allOf: + - minItems: 1 + maxItems: 2 + items: + minimum: 0 + maximum: 1 + + led-max-microamp: + description: | + Valid values for a LED connected to one FLED output: + 15625 - 250000, step by 15625 (rounded down) + Valid values for a LED connected to both FLED outputs: + 15625 - 500000, step by 15625 (rounded down) + + flash-max-microamp: + description: | + Valid values for a single LED connected to one FLED output + (boost mode must be turned off): + 15625 - 1000000, step by 15625 (rounded down) + Valid values for a single LED connected to both FLED outputs: + 15625 - 1250000, step by 15625 (rounded down) + Valid values for two LEDs case: + 15625 - 625000, step by 15625 (rounded down) + + flash-max-timeout-us: + description: | + Valid values: 62500 - 1000000, step by 62500 (rounded down) + minimum: 62500 + maximum: 1000000 + + required: + - flash-max-microamp + - flash-max-timeout-us + - led-max-microamp + - led-sources + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index d1f53bd449f7..4caadf73fc4a 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -31,7 +31,7 @@ properties: controller-data: description: - SPI controller data, see bindings/spi/spi-samsung.txt + SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml type: object google,cros-ec-spi-pre-delay: @@ -148,18 +148,21 @@ patternProperties: required: - compatible -if: - properties: - compatible: - contains: - enum: - - google,cros-ec-i2c - - google,cros-ec-rpmsg -then: - properties: - google,cros-ec-spi-pre-delay: false - google,cros-ec-spi-msg-delay: false - spi-max-frequency: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - google,cros-ec-i2c + - google,cros-ec-rpmsg + then: + properties: + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + else: + $ref: /schemas/spi/spi-peripheral-props.yaml additionalProperties: false @@ -200,7 +203,7 @@ examples: spi-max-frequency = <5000000>; proximity { - compatible = "google,cros-ec-mkbp-proximity"; + compatible = "google,cros-ec-mkbp-proximity"; }; cbas { diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt deleted file mode 100644 index be11943a0560..000000000000 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ /dev/null @@ -1,147 +0,0 @@ -Maxim MAX14577/77836 Multi-Function Device - -MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+ -Battery Charger and SFOUT LDO output for powering USB devices. It is -interfaced to host controller using I2C. - -MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. -For the description of Fuel Gauge low SOC alert interrupt see: -../power/supply/max17040_battery.txt - - -Required properties: -- compatible : Must be "maxim,max14577" or "maxim,max77836". -- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836) -- interrupts : IRQ line for the chip. - - -Required nodes: - - charger : - Node for configuring the charger driver. - Required properties: - - compatible : "maxim,max14577-charger" - or "maxim,max77836-charger" - - maxim,fast-charge-uamp : Current in uA for Fast Charge; - Valid values: - - for max14577: 90000 - 950000; - - for max77836: 45000 - 475000; - - maxim,eoc-uamp : Current in uA for End-Of-Charge mode; - Valid values: - - for max14577: 50000 - 200000; - - for max77836: 5000 - 100000; - - maxim,ovp-uvolt : OverVoltage Protection Threshold in uV; - In an overvoltage condition, INT asserts and charging - stops. Valid values: - - 6000000, 6500000, 7000000, 7500000; - - maxim,constant-uvolt : Battery Constant Voltage in uV; - Valid values: - - 4000000 - 4280000 (step by 20000); - - 4350000; - - -Optional nodes: -- max14577-muic/max77836-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max14577-muic" or "maxim,max77836-muic" - -- regulators : - Required properties: - - compatible : "maxim,max14577-regulator" - or "maxim,max77836-regulator" - - May contain a sub-node per regulator from the list below. Each - sub-node should contain the constraints and initialization information - for that regulator. See regulator.txt for a description of standard - properties for these sub-nodes. - - List of valid regulator names: - - for max14577: CHARGER, SAFEOUT. - - for max77836: CHARGER, SAFEOUT, LDO1, LDO2. - - The SAFEOUT is a fixed voltage regulator so there is no need to specify - voltages for it. - - -Example: - -#include - -max14577@25 { - compatible = "maxim,max14577"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - muic: max14577-muic { - compatible = "maxim,max14577-muic"; - }; - - regulators { - compatible = "maxim,max14577-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - }; - - charger { - compatible = "maxim,max14577-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <450000>; - maxim,eoc-uamp = <50000>; - maxim,ovp-uvolt = <6500000>; - }; -}; - - -max77836@25 { - compatible = "maxim,max77836"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - muic: max77836-muic { - compatible = "maxim,max77836-muic"; - }; - - regulators { - compatible = "maxim,max77836-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - }; - - charger { - compatible = "maxim,max77836-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <225000>; - maxim,eoc-uamp = <7500>; - maxim,ovp-uvolt = <6500000>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt deleted file mode 100644 index 1032df14498b..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ /dev/null @@ -1,194 +0,0 @@ -Maxim MAX77693 multi-function device - -MAX77693 is a Multifunction device with the following submodules: -- PMIC, -- CHARGER, -- LED, -- MUIC, -- HAPTIC - -It is interfaced to host controller using i2c. -This document describes the bindings for the mfd device. - -Required properties: -- compatible : Must be "maxim,max77693". -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Optional properties: -- regulators : The regulators of max77693 have to be instantiated under subnode - named "regulators" using the following format. - - regulators { - regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER - standard regulator constraints[*]. - }; - - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - -- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide - users with tactile feedback. PWM period and duty-cycle are varied in - order to provide the appropriate level of feedback. - - Required properties: - - compatible : Must be "maxim,max77693-haptic" - - haptic-supply : power supply for the haptic motor - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt - -- charger : Node configuring the charger driver. - If present, required properties: - - compatible : Must be "maxim,max77693-charger". - - Optional properties (if not set, defaults will be used): - - maxim,constant-microvolt : Battery constant voltage in uV. The charger - will operate in fast charge constant current mode till battery voltage - reaches this level. Then the charger will switch to fast charge constant - voltage mode. Also vsys (system voltage) will be set to this value when - DC power is supplied but charger is not enabled. - Valid values: 3650000 - 4400000, step by 25000 (rounded down) - Default: 4200000 - - - maxim,min-system-microvolt : Minimal system voltage in uV. - Valid values: 3000000 - 3700000, step by 100000 (rounded down) - Default: 3600000 - - - maxim,thermal-regulation-celsius : Temperature in Celsius for entering - high temperature charging mode. If die temperature exceeds this value - the charging current will be reduced by 105 mA/Celsius. - Valid values: 70, 85, 100, 115 - Default: 100 - - - maxim,battery-overcurrent-microamp : Overcurrent protection threshold - in uA (current from battery to system). - Valid values: 2000000 - 3500000, step by 250000 (rounded down) - Default: 3500000 - - - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for - triggering input voltage regulation loop. If input voltage decreases - below this value, the input current will be reduced to reach the - threshold voltage. - Valid values: 4300000, 4700000, 4800000, 4900000 - Default: 4300000 - -- led : the LED submodule device node - -There are two LED outputs available - FLED1 and FLED2. Each of them can -control a separate LED or they can be connected together to double -the maximum current for a single connected LED. One LED is represented -by one child node. - -Required properties: -- compatible : Must be "maxim,max77693-led". - -Optional properties: -- maxim,boost-mode : - In boost mode the device can produce up to 1.2A of total current - on both outputs. The maximum current on each output is reduced - to 625mA then. If not enabled explicitly, boost setting defaults to - LEDS_BOOST_FIXED in case both current sources are used. - Possible values: - LEDS_BOOST_OFF (0) - no boost, - LEDS_BOOST_ADAPTIVE (1) - adaptive mode, - LEDS_BOOST_FIXED (2) - fixed mode. -- maxim,boost-mvout : Output voltage of the boost module in millivolts. - Valid values: 3300 - 5500, step by 25 (rounded down) - Default: 3300 -- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired - if chip estimates that system voltage could drop below this level due - to flash power consumption. - Valid values: 2400 - 3400, step by 33 (rounded down) - Default: 2400 - -Required properties for the LED child node: -- led-sources : see Documentation/devicetree/bindings/leds/common.txt; - device current output identifiers: 0 - FLED1, 1 - FLED2 -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a LED connected to one FLED output: - 15625 - 250000, step by 15625 (rounded down) - Valid values for a LED connected to both FLED outputs: - 15625 - 500000, step by 15625 (rounded down) -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a single LED connected to one FLED output - (boost mode must be turned off): - 15625 - 1000000, step by 15625 (rounded down) - Valid values for a single LED connected to both FLED outputs: - 15625 - 1250000, step by 15625 (rounded down) - Valid values for two LEDs case: - 15625 - 625000, step by 15625 (rounded down) -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Valid values: 62500 - 1000000, step by 62500 (rounded down) - -Optional properties for the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt - -Optional nodes: -- max77693-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max77693-muic" - -Example: -#include - - max77693@66 { - compatible = "maxim,max77693"; - reg = <0x66>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - regulators { - esafeout@1 { - regulator-compatible = "ESAFEOUT1"; - regulator-name = "ESAFEOUT1"; - regulator-boot-on; - }; - esafeout@2 { - regulator-compatible = "ESAFEOUT2"; - regulator-name = "ESAFEOUT2"; - }; - charger@0 { - regulator-compatible = "CHARGER"; - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - regulator-boot-on; - }; - }; - - haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&haptic_supply>; - pwms = <&pwm 0 40000 0>; - pwm-names = "haptic"; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4200000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <75>; - maxim,battery-overcurrent-microamp = <3000000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - - led { - compatible = "maxim,max77693-led"; - maxim,boost-mode = ; - maxim,boost-mvout = <5000>; - maxim,mvsys-min = <2400>; - - camera_flash: flash-led { - label = "max77693-flash"; - led-sources = <0>, <1>; - led-max-microamp = <500000>; - flash-max-microamp = <1250000>; - flash-max-timeout-us = <1000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt deleted file mode 100644 index 09decac20d91..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ /dev/null @@ -1,25 +0,0 @@ -Maxim MAX77802 multi-function device - -The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high -efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power -up application processors and peripherals, a 2-channel 32kHz clock outputs, -a Real-Time-Clock (RTC) and a I2C interface to program the individual -regulators, clocks outputs and the RTC. - -Bindings for the built-in 32k clock generator block and -regulators are defined in ../clk/maxim,max77802.txt and -../regulator/max77802.txt respectively. - -Required properties: -- compatible : Must be "maxim,max77802" -- reg : Specifies the I2C slave address of PMIC block. -- interrupts : I2C device IRQ line connected to the main SoC. - -Example: - - max77802: pmic@9 { - compatible = "maxim,max77802"; - interrupt-parent = <&intc>; - interrupts = <26 IRQ_TYPE_NONE>; - reg = <0x09>; - }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml new file mode 100644 index 000000000000..27870b8760a6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which + includes voltage safeout regulators, charger and MicroUSB management IC. + + The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which + includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB + management IC. + +properties: + compatible: + enum: + - maxim,max14577 + - maxim,max77836 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + wakeup-source: true + + charger: + $ref: /schemas/power/supply/maxim,max14577.yaml + + extcon: + type: object + properties: + compatible: + enum: + - maxim,max14577-muic + - maxim,max77836-muic + + required: + - compatible + + regulators: + $ref: /schemas/regulator/maxim,max14577.yaml + +required: + - compatible + - interrupts + - reg + - charger + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577 + then: + properties: + charger: + properties: + compatible: + const: maxim,max14577-charger + extcon: + properties: + compatible: + const: maxim,max14577-muic + regulator: + properties: + compatible: + const: maxim,max14577-regulator + else: + properties: + charger: + properties: + compatible: + const: maxim,max77836-charger + extcon: + properties: + compatible: + const: maxim,max77836-muic + regulator: + properties: + compatible: + const: maxim,max77836-regulator + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max14577"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + extcon { + compatible = "maxim,max14577-muic"; + }; + + regulators { + compatible = "maxim,max14577-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + }; + + charger { + compatible = "maxim,max14577-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <450000>; + maxim,eoc-uamp = <50000>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; + + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max77836"; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_NONE>; + reg = <0x25>; + wakeup-source; + + extcon { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <45000>; + regulator-max-microamp = <475000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + }; + + LDO2 { + regulator-name = "UNUSED_LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000000..906101197e11 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/maxim,max77693.yaml + + led: + $ref: /schemas/leds/maxim,max77693.yaml + + max77693-muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + motor-driver: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = ; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml new file mode 100644 index 000000000000..74a6867d3c82 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. + +maintainers: + - Luca Ceresoli + +description: | + MAX77714 is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC and watchdog. + +properties: + compatible: + const: maxim,max77714 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + + regulators: + type: object + additionalProperties: false + + patternProperties: + '^(buck[0-3]|ldo[0-8])$': + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@1c { + compatible = "maxim,max77714"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml new file mode 100644 index 000000000000..baa1346ac5d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC + +maintainers: + - Javier Martinez Canillas + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77802 is a Power Management IC which includes voltage and + current regulators (10 high efficiency Buck regulators and 32 Low-DropOut + (LDO)), RTC and clock outputs. + + The MAX77802 provides two 32.768khz clock outputs that can be controlled + (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros + in dt-bindings/clock/maxim,max77802.h. + +properties: + compatible: + const: maxim,max77802 + + '#clock-cells': + const: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/maxim,max77802.yaml + description: + List of child nodes that specify the regulators. + + inb1-supply: + description: Power supply for buck1 + inb2-supply: + description: Power supply for buck2 + inb3-supply: + description: Power supply for buck3 + inb4-supply: + description: Power supply for buck4 + inb5-supply: + description: Power supply for buck5 + inb6-supply: + description: Power supply for buck6 + inb7-supply: + description: Power supply for buck7 + inb8-supply: + description: Power supply for buck8 + inb9-supply: + description: Power supply for buck9 + inb10-supply: + description: Power supply for buck10 + + inl1-supply: + description: Power supply for LDO8, LDO15 + inl2-supply: + description: Power supply for LDO17, LDO27, LDO30, LDO35 + inl3-supply: + description: Power supply for LDO3, LDO5, LDO7, LDO7 + inl4-supply: + description: Power supply for LDO10, LDO11, LDO13, LDO14 + inl5-supply: + description: Power supply for LDO9, LDO19 + inl6-supply: + description: Power supply for LDO4, LDO21, LDO24, LDO33 + inl7-supply: + description: Power supply for LDO18, LDO20, LDO28, LDO29 + inl9-supply: + description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34 + inl10-supply: + description: Power supply for LDO1, LDO2 + + wakeup-source: true + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + + BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = ; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = ; + }; + }; + + // ... + + LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml new file mode 100644 index 000000000000..61a0f9dcb983 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, fuel-gauge, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77843 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + extcon: + $ref: /schemas/extcon/maxim,max77843.yaml + + motor-driver: + type: object + properties: + compatible: + const: maxim,max77843-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: /schemas/regulator/maxim,max77843.yaml + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + extcon { + compatible = "maxim,max77843-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* + * TODO: The DTS this is based on does not have + * port@0 which is a required property. The ports + * look incomplete and need fixing. + * Add a disabled port just to satisfy dtschema. + */ + reg = <0>; + status = "disabled"; + }; + + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&mhl_to_musb_con>; + }; + }; + }; + }; + + ports { + port { + endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + }; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + + SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + motor-driver { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml new file mode 100644 index 000000000000..3978b48299de --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for + additional information and example. + +properties: + compatible: + enum: + - maxim,max14577-charger + - maxim,max77836-charger + + maxim,constant-uvolt: + description: + Battery Constant Voltage in uV + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4000000 + maximum: 4350000 + + maxim,eoc-uamp: + description: | + Current in uA for End-Of-Charge mode. + MAX14577: 50000-20000 + MAX77836: 5000-100000 + $ref: /schemas/types.yaml#/definitions/uint32 + + maxim,fast-charge-uamp: + description: | + Current in uA for Fast Charge + MAX14577: 90000-950000 + MAX77836: 45000-475000 + $ref: /schemas/types.yaml#/definitions/uint32 + + maxim,ovp-uvolt: + description: + OverVoltage Protection Threshold in uV; In an overvoltage condition, INT + asserts and charging stops. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [6000000, 6500000, 7000000, 7500000] + +required: + - compatible + - maxim,constant-uvolt + - maxim,eoc-uamp + - maxim,fast-charge-uamp + - maxim,ovp-uvolt + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577-charger + then: + properties: + maxim,eoc-uamp: + minimum: 50000 + maximum: 200000 + maxim,fast-charge-uamp: + minimum: 90000 + maximum: 950000 + else: + # max77836 + properties: + maxim,eoc-uamp: + minimum: 5000 + maximum: 100000 + maxim,fast-charge-uamp: + minimum: 45000 + maximum: 475000 + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml new file mode 100644 index 000000000000..a21dc1a8890f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77693-charger + + maxim,constant-microvolt: + description: | + Battery constant voltage in uV. The charger will operate in fast + charge constant current mode till battery voltage reaches this level. + Then the charger will switch to fast charge constant voltage mode. + Also vsys (system voltage) will be set to this value when DC power is + supplied but charger is not enabled. + Valid values: 3650000 - 4400000, step by 25000 (rounded down) + minimum: 3650000 + maximum: 4400000 + default: 4200000 + + maxim,min-system-microvolt: + description: | + Minimal system voltage in uV. + enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000, + 3600000, 3700000] + default: 3600000 + + maxim,thermal-regulation-celsius: + description: | + Temperature in Celsius for entering high temperature charging mode. + If die temperature exceeds this value the charging current will be + reduced by 105 mA/Celsius. + enum: [70, 85, 100, 115] + default: 100 + + maxim,battery-overcurrent-microamp: + description: | + Overcurrent protection threshold in uA (current from battery to + system). + Valid values: 2000000 - 3500000, step by 250000 (rounded down) + minimum: 2000000 + maximum: 3500000 + default: 3500000 + + maxim,charge-input-threshold-microvolt: + description: | + Threshold voltage in uV for triggering input voltage regulation loop. + If input voltage decreases below this value, the input current will + be reduced to reach the threshold voltage. + enum: [4300000, 4700000, 4800000, 4900000] + default: 4300000 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt deleted file mode 100644 index b82943d83677..000000000000 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ /dev/null @@ -1,111 +0,0 @@ -Binding for Maxim MAX77802 regulators - -This is a part of device tree bindings of MAX77802 multi-function device. -More information can be found in bindings/mfd/max77802.txt file. - -The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) -regulators that can be controlled over I2C. - -Following properties should be present in main device node of the MFD chip. - -Optional properties: -- inb1-supply: The input supply for BUCK1 -- inb2-supply: The input supply for BUCK2 -- inb3-supply: The input supply for BUCK3 -- inb4-supply: The input supply for BUCK4 -- inb5-supply: The input supply for BUCK5 -- inb6-supply: The input supply for BUCK6 -- inb7-supply: The input supply for BUCK7 -- inb8-supply: The input supply for BUCK8 -- inb9-supply: The input supply for BUCK9 -- inb10-supply: The input supply for BUCK10 -- inl1-supply: The input supply for LDO8 and LDO15 -- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35 -- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7 -- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14 -- inl5-supply: The input supply for LDO9 and LDO19 -- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33 -- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29 -- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34 -- inl10-supply: The input supply for LDO1 and LDO2 - -Optional nodes: -- regulators : The regulators of max77802 have to be instantiated - under subnode named "regulators" using the following format. - - regulator-name { - standard regulator constraints.... - }; - refer Documentation/devicetree/bindings/regulator/regulator.txt - -The regulator node name should be initialized with a string to get matched -with their hardware counterparts as follow. The valid names are: - - -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30 - and 32-35. - example: LDO1, LDO2, LDO35. - -BUCKn : for BUCKs, where n can lie in range 1 to 10. - example: BUCK1, BUCK5, BUCK10. - -The max77802 regulator supports two different operating modes: Normal and Low -Power Mode. Some regulators support the modes to be changed at startup or by -the consumers during normal operation while others only support to change the -mode during system suspend. The standard regulator suspend states binding can -be used to configure the regulator operating mode. - -The regulators that support the standard "regulator-initial-mode" property, -changing their mode during normal operation are: LDOs 1, 3, 20 and 21. - -The possible values for "regulator-initial-mode" and "regulator-mode" are: - 1: Normal regulator voltage output mode. - 3: Low Power which reduces the quiescent current down to only 1uA - -The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h -header and can be included by device tree source files. - -The standard "regulator-mode" property can only be used for regulators that -support changing their mode to Low Power Mode during suspend. These regulators -are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has -been enabled for the given suspend state using "regulator-on-in-suspend" and -has not been disabled for that state using "regulator-off-in-suspend". - -Example: - - max77802@9 { - compatible = "maxim,max77802"; - interrupt-parent = <&wakeup_eint>; - interrupts = <26 0>; - reg = <0x09>; - #address-cells = <1>; - #size-cells = <0>; - - inb1-supply = <&parent_reg>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-initial-mode = ; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - regulator-mode = ; - }; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml new file mode 100644 index 000000000000..16f01886a601 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max14577.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for + additional information and example. + +properties: + compatible: + enum: + - maxim,max14577-regulator + - maxim,max77836-regulator + + CHARGER: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Current regulator. + + properties: + regulator-min-microvolt: false + regulator-max-microvolt: false + + SAFEOUT: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Safeout LDO regulator (fixed voltage). + + properties: + regulator-min-microamp: false + regulator-max-microamp: false + regulator-min-microvolt: + const: 4900000 + regulator-max-microvolt: + const: 4900000 + +patternProperties: + "^LDO[12]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: | + Current regulator. + + properties: + regulator-min-microamp: false + regulator-max-microamp: false + regulator-min-microvolt: + minimum: 800000 + regulator-max-microvolt: + maximum: 3950000 + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577-regulator + then: + properties: + LDO1: false + LDO2: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml new file mode 100644 index 000000000000..20d8559bdc2b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77693.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for + additional information and example. + +properties: + CHARGER: + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Current regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microamp: + minimum: 60000 + regulator-max-microamp: + maximum: 2580000 + + required: + - regulator-name + +patternProperties: + "^ESAFEOUT[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Safeout LDO regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 3300000 + regulator-max-microvolt: + maximum: 4950000 + + required: + - regulator-name + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml new file mode 100644 index 000000000000..f2b4dd15a0f3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC regulators + +maintainers: + - Javier Martinez Canillas + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO) + regulators. + + See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for + additional information and example. + + Certain regulators support "regulator-initial-mode" and "regulator-mode". + The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h + and their meaning is:: + 1 - Normal regulator voltage output mode. + 3 - Low Power which reduces the quiescent current down to only 1uA + + The standard "regulator-mode" property can only be used for regulators that + support changing their mode to Low Power Mode during suspend. These + regulators are:: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the + regulator has been enabled for the given suspend state using + "regulator-on-in-suspend" and has not been disabled for that state using + "regulator-off-in-suspend". + +patternProperties: + # LDO1, LDO3, LDO20, LDO21 + "^LDO([13]|2[01])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + LDOs supporting the regulator-initial-mode property and changing their + mode during normal operation. + + # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35 + "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + LDOs supporting the regulator-mode property (changing mode to Low Power + Mode during suspend). + + properties: + regulator-initial-mode: false + + # buck2-4 + "^BUCK[2-4]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + bucks supporting the regulator-mode property (changing mode to Low Power + Mode during suspend). + + properties: + regulator-initial-mode: false + + # buck1, buck5-10 + "^BUCK([15-9]|10)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-initial-mode: false + + patternProperties: + regulator-state-(standby|mem|disk): + type: object + properties: + regulator-mode: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml new file mode 100644 index 000000000000..a963025e96c1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77843.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC regulators + +maintainers: + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB Integrated + Circuit (MUIC). + + See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for + additional information and example. + +properties: + compatible: + const: maxim,max77843-regulator + + CHARGER: + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Current regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microamp: + minimum: 100000 + regulator-max-microamp: + maximum: 3150000 + + required: + - regulator-name + +patternProperties: + "^SAFEOUT[12]$": + type: object + $ref: regulator.yaml# + additionalProperties: false + description: | + Safeout LDO regulator. + + properties: + regulator-name: true + regulator-always-on: true + regulator-boot-on: true + regulator-min-microvolt: + minimum: 3300000 + regulator-max-microvolt: + maximum: 4950000 + + required: + - regulator-name + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index 273f2d95a043..e72b6a3fae99 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -22,7 +22,7 @@ description: | [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt - [3] Documentation/devicetree/bindings/spi/spi-samsung.txt + [3] Documentation/devicetree/bindings/spi/samsung,spi.yaml properties: $nodename: diff --git a/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml new file mode 100644 index 000000000000..f0db3fb3d688 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/samsung,spi-peripheral-props.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Peripheral-specific properties for Samsung S3C/S5P/Exynos SoC SPI controller + +maintainers: + - Krzysztof Kozlowski + +description: + See spi-peripheral-props.yaml for more info. + +properties: + controller-data: + type: object + additionalProperties: false + + properties: + samsung,spi-feedback-delay: + description: | + The sampling phase shift to be applied on the miso line (to account + for any lag in the miso line). Valid values: + - 0: No phase shift. + - 1: 90 degree phase shift sampling. + - 2: 180 degree phase shift sampling. + - 3: 270 degree phase shift sampling. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/samsung,spi.yaml b/Documentation/devicetree/bindings/spi/samsung,spi.yaml new file mode 100644 index 000000000000..61c77088e8ee --- /dev/null +++ b/Documentation/devicetree/bindings/spi/samsung,spi.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/samsung,spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S3C/S5P/Exynos SoC SPI controller + +maintainers: + - Krzysztof Kozlowski + +description: + All the SPI controller nodes should be represented in the aliases node using + the following format 'spi{n}' where n is a unique number for the alias. + +properties: + compatible: + oneOf: + - enum: + - samsung,s3c2443-spi # for S3C2443, S3C2416 and S3C2450 + - samsung,s3c6410-spi + - samsung,s5pv210-spi # for S5PV210 and S5PC110 + - samsung,exynos5433-spi + - const: samsung,exynos7-spi + deprecated: true + + clocks: + minItems: 2 + maxItems: 3 + + clock-names: + minItems: 2 + maxItems: 3 + + cs-gpios: true + + dmas: + minItems: 2 + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + interrupts: + maxItems: 1 + + no-cs-readback: + description: + The CS line is disconnected, therefore the device should not operate + based on CS signalling. + type: boolean + + num-cs: + minimum: 1 + maximum: 4 + default: 1 + + samsung,spi-src-clk: + description: + If the spi controller includes a internal clock mux to select the clock + source for the spi bus clock, this property can be used to indicate the + clock to be used for driving the spi bus clock. If not specified, the + clock number 0 is used as default. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + reg: + maxItems: 1 + +required: + - compatible + - clocks + - clock-names + - dmas + - dma-names + - interrupts + - reg + +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + const: samsung,exynos5433-spi + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: spi + - enum: + - spi_busclk0 + - spi_busclk1 + - spi_busclk2 + - spi_busclk3 + - const: spi_ioclk + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: spi + - enum: + - spi_busclk0 + - spi_busclk1 + - spi_busclk2 + - spi_busclk3 + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + + spi@14d30000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d30000 0x100>; + interrupts = ; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI1>, + <&cmu_peric CLK_SCLK_SPI1>, + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; + clock-names = "spi", + "spi_busclk0", + "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + num-cs = <1>; + + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + + audio-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 IRQ_TYPE_NONE>; + clocks = <&pmu_system_controller 0>, + <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x2>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + SPKVDDL-supply = <&ldo18_reg>; + SPKVDDR-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 5dd209206e88..df885eeb144f 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -85,5 +85,6 @@ properties: # The controller specific properties go here. allOf: - $ref: cdns,qspi-nor-peripheral-props.yaml# + - $ref: samsung,spi-peripheral-props.yaml# additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt deleted file mode 100644 index 49028a4f5df1..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ /dev/null @@ -1,122 +0,0 @@ -* Samsung SPI Controller - -The Samsung SPI controller is used to interface with various devices such as flash -and display controllers using the SPI communication interface. - -Required SoC Specific Properties: - -- compatible: should be one of the following. - - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms - - samsung,s3c6410-spi: for s3c6410 platforms - - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms - - samsung,exynos5433-spi: for exynos5433 compatible controllers - - samsung,exynos7-spi: for exynos7 platforms - -- reg: physical base address of the controller and length of memory mapped - region. - -- interrupts: The interrupt number to the cpu. The interrupt specifier format - depends on the interrupt controller. - -- dmas : Two or more DMA channel specifiers following the convention outlined - in bindings/dma/dma.txt - -- dma-names: Names for the dma channels. There must be at least one channel - named "tx" for transmit and named "rx" for receive. - -- clocks: specifies the clock IDs provided to the SPI controller; they are - required for interacting with the controller itself, for synchronizing the bus - and as I/O clock (the latter is required by exynos5433 and exynos7). - -- clock-names: string names of the clocks in the 'clocks' property; for all the - the devices the names must be "spi", "spi_busclkN" (where N is determined by - "samsung,spi-src-clk"), while Exynos5433 should specify a third clock - "spi_ioclk" for the I/O clock. - -Required Board Specific Properties: - -- #address-cells: should be 1. -- #size-cells: should be 0. - -Optional Board Specific Properties: - -- samsung,spi-src-clk: If the spi controller includes a internal clock mux to - select the clock source for the spi bus clock, this property can be used to - indicate the clock to be used for driving the spi bus clock. If not specified, - the clock number 0 is used as default. - -- num-cs: Specifies the number of chip select lines supported. If - not specified, the default number of chip select lines is set to 1. - -- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt) - -- no-cs-readback: the CS line is disconnected, therefore the device should not - operate based on CS signalling. - -SPI Controller specific data in SPI slave nodes: - -- The spi slave nodes should provide the following information which is required - by the spi controller. - - - samsung,spi-feedback-delay: The sampling phase shift to be applied on the - miso line (to account for any lag in the miso line). The following are the - valid values. - - - 0: No phase shift. - - 1: 90 degree phase shift sampling. - - 2: 180 degree phase shift sampling. - - 3: 270 degree phase shift sampling. - -Aliases: - -- All the SPI controller nodes should be represented in the aliases node using - the following format 'spi{n}' where n is a unique number for the alias. - - -Example: - -- SoC Specific Portion: - - spi_0: spi@12d20000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; - dmas = <&pdma0 5 - &pdma0 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - }; - -- Board Specific Portion: - - spi_0: spi@12d20000 { - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - cs-gpios = <&gpa2 5 0>; - - w25q80bw@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <10000>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; - }; - }; - }; diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c914384..89d074afdafe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11691,11 +11691,18 @@ F: drivers/power/supply/max77650-charger.c F: drivers/regulator/max77650-regulator.c F: include/linux/mfd/max77650.h +MAXIM MAX77714 PMIC MFD DRIVER +M: Luca Ceresoli +S: Maintained +F: Documentation/devicetree/bindings/mfd/maxim,max77714.yaml +F: drivers/mfd/max77714.c +F: include/linux/mfd/max77714.h + MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER M: Javier Martinez Canillas L: linux-kernel@vger.kernel.org S: Supported -F: Documentation/devicetree/bindings/*/*max77802.txt +F: Documentation/devicetree/bindings/*/*max77802.yaml F: drivers/regulator/max77802-regulator.c F: include/dt-bindings/*/*max77802.h @@ -11710,6 +11717,8 @@ M: Krzysztof Kozlowski M: Bartlomiej Zolnierkiewicz L: linux-pm@vger.kernel.org S: Supported +F: Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml +F: Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml F: drivers/power/supply/max14577_charger.c F: drivers/power/supply/max77693_charger.c @@ -11719,10 +11728,13 @@ M: Krzysztof Kozlowski M: Bartlomiej Zolnierkiewicz L: linux-kernel@vger.kernel.org S: Supported +F: Documentation/devicetree/bindings/*/maxim,max14577.yaml F: Documentation/devicetree/bindings/*/maxim,max77686.yaml +F: Documentation/devicetree/bindings/*/maxim,max77693.yaml +F: Documentation/devicetree/bindings/*/maxim,max77843.yaml F: Documentation/devicetree/bindings/clock/maxim,max77686.txt -F: Documentation/devicetree/bindings/mfd/max14577.txt F: Documentation/devicetree/bindings/mfd/max77693.txt +F: drivers/*/*max77843.c F: drivers/*/max14577*.c F: drivers/*/max77686*.c F: drivers/*/max77693*.c @@ -17089,7 +17101,7 @@ M: Andi Shyti L: linux-spi@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/spi/spi-samsung.txt +F: Documentation/devicetree/bindings/spi/samsung,spi*.yaml F: drivers/spi/spi-s3c* F: include/linux/platform_data/spi-s3c64xx.h F: include/linux/spi/s3c24xx-fiq.h diff --git a/drivers/iio/temperature/iqs620at-temp.c b/drivers/iio/temperature/iqs620at-temp.c index fe126e1fb783..e2f878d57af7 100644 --- a/drivers/iio/temperature/iqs620at-temp.c +++ b/drivers/iio/temperature/iqs620at-temp.c @@ -17,6 +17,7 @@ #define IQS620_TEMP_SCALE 1000 #define IQS620_TEMP_OFFSET (-100) +#define IQS620_TEMP_OFFSET_V3 (-40) static int iqs620_temp_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, @@ -41,7 +42,8 @@ static int iqs620_temp_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: - *val = IQS620_TEMP_OFFSET; + *val = iqs62x->hw_num < IQS620_HW_NUM_V3 ? IQS620_TEMP_OFFSET + : IQS620_TEMP_OFFSET_V3; return IIO_VAL_INT; default: diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index e0d2fcb10a0c..f6678c07dc5e 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -849,6 +849,20 @@ config MFD_MAX77693 additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77714 + tristate "Maxim Semiconductor MAX77714 PMIC Support" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Say yes here to add support for Maxim Semiconductor MAX77714. + This is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC, watchdog etc. This driver + provides common support for accessing the device; additional + drivers must be enabled in order to use each functionality of the + device. + config MFD_MAX77843 bool "Maxim Semiconductor MAX77843 PMIC Support" depends on I2C=y diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index df1ecc4a4c95..eea70cb9f9b9 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -162,6 +162,7 @@ obj-$(CONFIG_MFD_MAX77620) += max77620.o obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o +obj-$(CONFIG_MFD_MAX77714) += max77714.o obj-$(CONFIG_MFD_MAX77843) += max77843.o obj-$(CONFIG_MFD_MAX8907) += max8907.o max8925-objs := max8925-core.o max8925-i2c.o diff --git a/drivers/mfd/iqs62x.c b/drivers/mfd/iqs62x.c index 9805cf191245..575ab67e243d 100644 --- a/drivers/mfd/iqs62x.c +++ b/drivers/mfd/iqs62x.c @@ -898,7 +898,6 @@ static int iqs62x_probe(struct i2c_client *client) struct iqs62x_info info; unsigned int val; int ret, i, j; - u8 sw_num = 0; const char *fw_name = NULL; iqs62x = devm_kzalloc(&client->dev, sizeof(*iqs62x), GFP_KERNEL); @@ -949,7 +948,8 @@ static int iqs62x_probe(struct i2c_client *client) if (info.sw_num < iqs62x->dev_desc->sw_num) continue; - sw_num = info.sw_num; + iqs62x->sw_num = info.sw_num; + iqs62x->hw_num = info.hw_num; /* * Read each of the device's designated calibration registers, @@ -985,7 +985,7 @@ static int iqs62x_probe(struct i2c_client *client) return -EINVAL; } - if (!sw_num) { + if (!iqs62x->sw_num) { dev_err(&client->dev, "Unrecognized software number: 0x%02X\n", info.sw_num); return -EINVAL; diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index f9e12ab2bc75..2ac64277fb84 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -87,7 +87,7 @@ static bool max77802_rtc_is_volatile_reg(struct device *dev, unsigned int reg) reg == MAX77802_RTC_WEEKDAY || reg == MAX77802_RTC_MONTH || reg == MAX77802_RTC_YEAR || - reg == MAX77802_RTC_DATE); + reg == MAX77802_RTC_MONTHDAY); } static bool max77802_is_volatile_reg(struct device *dev, unsigned int reg) diff --git a/drivers/mfd/max77714.c b/drivers/mfd/max77714.c new file mode 100644 index 000000000000..d1e4247800d2 --- /dev/null +++ b/drivers/mfd/max77714.c @@ -0,0 +1,152 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Maxim MAX77714 Core Driver + * + * Copyright (C) 2022 Luca Ceresoli + * Author: Luca Ceresoli + */ + +#include +#include +#include +#include +#include +#include +#include + +static const struct mfd_cell max77714_cells[] = { + { .name = "max77714-watchdog" }, + { .name = "max77714-rtc" }, +}; + +static const struct regmap_range max77714_readable_ranges[] = { + regmap_reg_range(MAX77714_INT_TOP, MAX77714_INT_TOP), + regmap_reg_range(MAX77714_INT_TOPM, MAX77714_INT_TOPM), + regmap_reg_range(MAX77714_32K_STATUS, MAX77714_32K_CONFIG), + regmap_reg_range(MAX77714_CNFG_GLBL2, MAX77714_CNFG2_ONOFF), +}; + +static const struct regmap_range max77714_writable_ranges[] = { + regmap_reg_range(MAX77714_INT_TOPM, MAX77714_INT_TOPM), + regmap_reg_range(MAX77714_32K_CONFIG, MAX77714_32K_CONFIG), + regmap_reg_range(MAX77714_CNFG_GLBL2, MAX77714_CNFG2_ONOFF), +}; + +static const struct regmap_access_table max77714_readable_table = { + .yes_ranges = max77714_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77714_readable_ranges), +}; + +static const struct regmap_access_table max77714_writable_table = { + .yes_ranges = max77714_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77714_writable_ranges), +}; + +static const struct regmap_config max77714_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77714_CNFG2_ONOFF, + .rd_table = &max77714_readable_table, + .wr_table = &max77714_writable_table, +}; + +static const struct regmap_irq max77714_top_irqs[] = { + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_ONOFF, 0, MAX77714_INT_TOP_ONOFF), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_RTC, 0, MAX77714_INT_TOP_RTC), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GPIO, 0, MAX77714_INT_TOP_GPIO), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_LDO, 0, MAX77714_INT_TOP_LDO), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_SD, 0, MAX77714_INT_TOP_SD), + REGMAP_IRQ_REG(MAX77714_IRQ_TOP_GLBL, 0, MAX77714_INT_TOP_GLBL), +}; + +static const struct regmap_irq_chip max77714_irq_chip = { + .name = "max77714-pmic", + .status_base = MAX77714_INT_TOP, + .mask_base = MAX77714_INT_TOPM, + .num_regs = 1, + .irqs = max77714_top_irqs, + .num_irqs = ARRAY_SIZE(max77714_top_irqs), +}; + +/* + * MAX77714 initially uses the internal, low precision oscillator. Enable + * the external oscillator by setting the XOSC_RETRY bit. If the external + * oscillator is not OK (probably not installed) this has no effect. + */ +static int max77714_setup_xosc(struct device *dev, struct regmap *regmap) +{ + /* Internal Crystal Load Capacitance, indexed by value of 32KLOAD bits */ + static const unsigned int load_cap[4] = {0, 10, 12, 22}; /* pF */ + unsigned int load_cap_idx; + unsigned int status; + int err; + + err = regmap_update_bits(regmap, MAX77714_32K_CONFIG, + MAX77714_32K_CONFIG_XOSC_RETRY, + MAX77714_32K_CONFIG_XOSC_RETRY); + if (err) + return dev_err_probe(dev, err, "Failed to configure the external oscillator\n"); + + err = regmap_read(regmap, MAX77714_32K_STATUS, &status); + if (err) + return dev_err_probe(dev, err, "Failed to read external oscillator status\n"); + + load_cap_idx = (status >> MAX77714_32K_STATUS_32KLOAD_SHF) + & MAX77714_32K_STATUS_32KLOAD_MSK; + + dev_info(dev, "Using %s oscillator, %d pF load cap\n", + status & MAX77714_32K_STATUS_32KSOURCE ? "internal" : "external", + load_cap[load_cap_idx]); + + return 0; +} + +static int max77714_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; + int err; + + regmap = devm_regmap_init_i2c(client, &max77714_regmap_config); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialise regmap\n"); + + err = max77714_setup_xosc(dev, regmap); + if (err) + return err; + + err = devm_regmap_add_irq_chip(dev, regmap, client->irq, + IRQF_ONESHOT | IRQF_SHARED, 0, + &max77714_irq_chip, &irq_data); + if (err) + return dev_err_probe(dev, err, "Failed to add PMIC IRQ chip\n"); + + err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max77714_cells, ARRAY_SIZE(max77714_cells), + NULL, 0, NULL); + if (err) + return dev_err_probe(dev, err, "Failed to register child devices\n"); + + return 0; +} + +static const struct of_device_id max77714_dt_match[] = { + { .compatible = "maxim,max77714" }, + {}, +}; +MODULE_DEVICE_TABLE(of, max77714_dt_match); + +static struct i2c_driver max77714_driver = { + .driver = { + .name = "max77714", + .of_match_table = max77714_dt_match, + }, + .probe_new = max77714_probe, +}; +module_i2c_driver(max77714_driver); + +MODULE_DESCRIPTION("Maxim MAX77714 MFD core driver"); +MODULE_AUTHOR("Luca Ceresoli "); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 8a4f1d90dcfd..1000572761a8 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -323,8 +323,10 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, adc1 |= MC13783_ADC1_ATOX; dev_dbg(mc13xxx->dev, "%s: request irq\n", __func__); - mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE, + ret = mc13xxx_irq_request(mc13xxx, MC13XXX_IRQ_ADCDONE, mc13xxx_handler_adcdone, __func__, &adcdone_data); + if (ret) + goto out; mc13xxx_reg_write(mc13xxx, MC13XXX_ADC0, adc0); mc13xxx_reg_write(mc13xxx, MC13XXX_ADC1, adc1); diff --git a/drivers/mfd/mt6358-irq.c b/drivers/mfd/mt6358-irq.c index 83f3ffbdbb4c..ea5e452510eb 100644 --- a/drivers/mfd/mt6358-irq.c +++ b/drivers/mfd/mt6358-irq.c @@ -212,6 +212,7 @@ int mt6358_irq_init(struct mt6397_chip *chip) switch (chip->chip_id) { case MT6358_CHIP_ID: + case MT6366_CHIP_ID: chip->irq_data = &mt6358_irqd; break; diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index d85a3c31347c..f6d6d4c26361 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -375,7 +375,7 @@ config RTC_DRV_MAX8997 config RTC_DRV_MAX77686 tristate "Maxim MAX77686" - depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST + depends on MFD_MAX77686 || MFD_MAX77620 || MFD_MAX77714 || COMPILE_TEST help If you say yes here you will get support for the RTC of Maxim MAX77686/MAX77620/MAX77802 PMIC. diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c index eae7cb9faf1e..b0250d91fb00 100644 --- a/drivers/rtc/rtc-max77686.c +++ b/drivers/rtc/rtc-max77686.c @@ -19,6 +19,7 @@ #define MAX77686_I2C_ADDR_RTC (0x0C >> 1) #define MAX77620_I2C_ADDR_RTC 0x68 +#define MAX77714_I2C_ADDR_RTC 0x48 #define MAX77686_INVALID_I2C_ADDR (-1) /* Define non existing register */ @@ -34,9 +35,6 @@ #define RTC_UDR_MASK BIT(RTC_UDR_SHIFT) #define RTC_RBUDR_SHIFT 4 #define RTC_RBUDR_MASK BIT(RTC_RBUDR_SHIFT) -/* RTC Hour register */ -#define HOUR_PM_SHIFT 6 -#define HOUR_PM_MASK BIT(HOUR_PM_SHIFT) /* RTC Alarm Enable */ #define ALARM_ENABLE_SHIFT 7 #define ALARM_ENABLE_MASK BIT(ALARM_ENABLE_SHIFT) @@ -57,28 +55,31 @@ enum { RTC_WEEKDAY, RTC_MONTH, RTC_YEAR, - RTC_DATE, + RTC_MONTHDAY, RTC_NR_TIME }; +/** + * struct max77686_rtc_driver_data - model-specific configuration + * @delay: Minimum usecs needed for a RTC update + * @mask: Mask used to read RTC registers value + * @map: Registers offset to I2C addresses map + * @alarm_enable_reg: Has a separate alarm enable register? + * @rtc_i2c_addr: I2C address for RTC block + * @rtc_irq_from_platform: RTC interrupt via platform resource + * @alarm_pending_status_reg: Pending alarm status register + * @rtc_irq_chip: RTC IRQ CHIP for regmap + * @regmap_config: regmap configuration for the chip + */ struct max77686_rtc_driver_data { - /* Minimum usecs needed for a RTC update */ unsigned long delay; - /* Mask used to read RTC registers value */ u8 mask; - /* Registers offset to I2C addresses map */ const unsigned int *map; - /* Has a separate alarm enable register? */ bool alarm_enable_reg; - /* I2C address for RTC block */ int rtc_i2c_addr; - /* RTC interrupt via platform resource */ bool rtc_irq_from_platform; - /* Pending alarm status register */ int alarm_pending_status_reg; - /* RTC IRQ CHIP for regmap */ const struct regmap_irq_chip *rtc_irq_chip; - /* regmap configuration for the chip */ const struct regmap_config *regmap_config; }; @@ -96,7 +97,6 @@ struct max77686_rtc_info { int rtc_irq; int virq; - int rtc_24hr_mode; }; enum MAX77686_RTC_OP { @@ -116,7 +116,7 @@ enum max77686_rtc_reg_offset { REG_RTC_WEEKDAY, REG_RTC_MONTH, REG_RTC_YEAR, - REG_RTC_DATE, + REG_RTC_MONTHDAY, REG_ALARM1_SEC, REG_ALARM1_MIN, REG_ALARM1_HOUR, @@ -147,7 +147,7 @@ static const unsigned int max77686_map[REG_RTC_END] = { [REG_RTC_WEEKDAY] = MAX77686_RTC_WEEKDAY, [REG_RTC_MONTH] = MAX77686_RTC_MONTH, [REG_RTC_YEAR] = MAX77686_RTC_YEAR, - [REG_RTC_DATE] = MAX77686_RTC_DATE, + [REG_RTC_MONTHDAY] = MAX77686_RTC_MONTHDAY, [REG_ALARM1_SEC] = MAX77686_ALARM1_SEC, [REG_ALARM1_MIN] = MAX77686_ALARM1_MIN, [REG_ALARM1_HOUR] = MAX77686_ALARM1_HOUR, @@ -201,6 +201,28 @@ static const struct max77686_rtc_driver_data max77686_drv_data = { .regmap_config = &max77686_rtc_regmap_config, }; +static const struct regmap_irq_chip max77714_rtc_irq_chip = { + .name = "max77714-rtc", + .status_base = MAX77686_RTC_INT, + .mask_base = MAX77686_RTC_INTM, + .num_regs = 1, + .irqs = max77686_rtc_irqs, + .num_irqs = ARRAY_SIZE(max77686_rtc_irqs) - 1, /* no WTSR on 77714 */ +}; + +static const struct max77686_rtc_driver_data max77714_drv_data = { + .delay = 16000, + .mask = 0x7f, + .map = max77686_map, + .alarm_enable_reg = false, + .rtc_irq_from_platform = false, + /* On MAX77714 RTCA1 is BIT 1 of RTCINT (0x00). Not supported by this driver. */ + .alarm_pending_status_reg = MAX77686_INVALID_REG, + .rtc_i2c_addr = MAX77714_I2C_ADDR_RTC, + .rtc_irq_chip = &max77714_rtc_irq_chip, + .regmap_config = &max77686_rtc_regmap_config, +}; + static const struct regmap_config max77620_rtc_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -230,7 +252,7 @@ static const unsigned int max77802_map[REG_RTC_END] = { [REG_RTC_WEEKDAY] = MAX77802_RTC_WEEKDAY, [REG_RTC_MONTH] = MAX77802_RTC_MONTH, [REG_RTC_YEAR] = MAX77802_RTC_YEAR, - [REG_RTC_DATE] = MAX77802_RTC_DATE, + [REG_RTC_MONTHDAY] = MAX77802_RTC_MONTHDAY, [REG_ALARM1_SEC] = MAX77802_ALARM1_SEC, [REG_ALARM1_MIN] = MAX77802_ALARM1_MIN, [REG_ALARM1_HOUR] = MAX77802_ALARM1_HOUR, @@ -275,17 +297,11 @@ static void max77686_rtc_data_to_tm(u8 *data, struct rtc_time *tm, tm->tm_sec = data[RTC_SEC] & mask; tm->tm_min = data[RTC_MIN] & mask; - if (info->rtc_24hr_mode) { - tm->tm_hour = data[RTC_HOUR] & 0x1f; - } else { - tm->tm_hour = data[RTC_HOUR] & 0x0f; - if (data[RTC_HOUR] & HOUR_PM_MASK) - tm->tm_hour += 12; - } + tm->tm_hour = data[RTC_HOUR] & 0x1f; /* Only a single bit is set in data[], so fls() would be equivalent */ tm->tm_wday = ffs(data[RTC_WEEKDAY] & mask) - 1; - tm->tm_mday = data[RTC_DATE] & 0x1f; + tm->tm_mday = data[RTC_MONTHDAY] & 0x1f; tm->tm_mon = (data[RTC_MONTH] & 0x0f) - 1; tm->tm_year = data[RTC_YEAR] & mask; tm->tm_yday = 0; @@ -306,7 +322,7 @@ static int max77686_rtc_tm_to_data(struct rtc_time *tm, u8 *data, data[RTC_MIN] = tm->tm_min; data[RTC_HOUR] = tm->tm_hour; data[RTC_WEEKDAY] = 1 << tm->tm_wday; - data[RTC_DATE] = tm->tm_mday; + data[RTC_MONTHDAY] = tm->tm_mday; data[RTC_MONTH] = tm->tm_mon + 1; if (info->drv_data->alarm_enable_reg) { @@ -562,8 +578,8 @@ static int max77686_rtc_start_alarm(struct max77686_rtc_info *info) data[RTC_MONTH] |= (1 << ALARM_ENABLE_SHIFT); if (data[RTC_YEAR] & info->drv_data->mask) data[RTC_YEAR] |= (1 << ALARM_ENABLE_SHIFT); - if (data[RTC_DATE] & 0x1f) - data[RTC_DATE] |= (1 << ALARM_ENABLE_SHIFT); + if (data[RTC_MONTHDAY] & 0x1f) + data[RTC_MONTHDAY] |= (1 << ALARM_ENABLE_SHIFT); ret = regmap_bulk_write(info->rtc_regmap, map[REG_ALARM1_SEC], data, ARRAY_SIZE(data)); @@ -659,8 +675,6 @@ static int max77686_rtc_init_reg(struct max77686_rtc_info *info) data[0] = (1 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); data[1] = (0 << BCD_EN_SHIFT) | (1 << MODEL24_SHIFT); - info->rtc_24hr_mode = 1; - ret = regmap_bulk_write(info->rtc_regmap, info->drv_data->map[REG_RTC_CONTROLM], data, ARRAY_SIZE(data)); @@ -852,6 +866,7 @@ static const struct platform_device_id rtc_id[] = { { "max77686-rtc", .driver_data = (kernel_ulong_t)&max77686_drv_data, }, { "max77802-rtc", .driver_data = (kernel_ulong_t)&max77802_drv_data, }, { "max77620-rtc", .driver_data = (kernel_ulong_t)&max77620_drv_data, }, + { "max77714-rtc", .driver_data = (kernel_ulong_t)&max77714_drv_data, }, {}, }; MODULE_DEVICE_TABLE(platform, rtc_id); diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 8755cd85e83c..386550fca81c 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -796,16 +796,14 @@ static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( return ERR_PTR(-EINVAL); } + cs = kzalloc(sizeof(*cs), GFP_KERNEL); + if (!cs) + return ERR_PTR(-ENOMEM); + data_np = of_get_child_by_name(slave_np, "controller-data"); if (!data_np) { - dev_err(&spi->dev, "child node 'controller-data' not found\n"); - return ERR_PTR(-EINVAL); - } - - cs = kzalloc(sizeof(*cs), GFP_KERNEL); - if (!cs) { - of_node_put(data_np); - return ERR_PTR(-ENOMEM); + dev_info(&spi->dev, "feedback delay set to default (0)\n"); + return cs; } of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index c8fa79da23b3..5373ecdec58e 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -678,7 +678,7 @@ config MAX63XX_WATCHDOG config MAX77620_WATCHDOG tristate "Maxim Max77620 Watchdog Timer" - depends on MFD_MAX77620 || COMPILE_TEST + depends on MFD_MAX77620 || MFD_MAX77714 || COMPILE_TEST select WATCHDOG_CORE help This is the driver for the Max77620 watchdog timer. diff --git a/drivers/watchdog/max77620_wdt.c b/drivers/watchdog/max77620_wdt.c index be6a53c30002..b76ad6ba0915 100644 --- a/drivers/watchdog/max77620_wdt.c +++ b/drivers/watchdog/max77620_wdt.c @@ -3,8 +3,10 @@ * Maxim MAX77620 Watchdog Driver * * Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved. + * Copyright (C) 2022 Luca Ceresoli * * Author: Laxman Dewangan + * Author: Luca Ceresoli */ #include @@ -13,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -20,17 +23,57 @@ static bool nowayout = WATCHDOG_NOWAYOUT; +/** + * struct max77620_variant - Data specific to a chip variant + * @wdt_info: watchdog descriptor + * @reg_onoff_cnfg2: ONOFF_CNFG2 register offset + * @reg_cnfg_glbl2: CNFG_GLBL2 register offset + * @reg_cnfg_glbl3: CNFG_GLBL3 register offset + * @wdtc_mask: WDTC bit mask in CNFG_GLBL3 (=bits to update to ping the watchdog) + * @bit_wd_rst_wk: WD_RST_WK bit offset within ONOFF_CNFG2 + * @cnfg_glbl2_cfg_bits: configuration bits to enable in CNFG_GLBL2 register + */ +struct max77620_variant { + u8 reg_onoff_cnfg2; + u8 reg_cnfg_glbl2; + u8 reg_cnfg_glbl3; + u8 wdtc_mask; + u8 bit_wd_rst_wk; + u8 cnfg_glbl2_cfg_bits; +}; + struct max77620_wdt { struct device *dev; struct regmap *rmap; + const struct max77620_variant *drv_data; struct watchdog_device wdt_dev; }; +static const struct max77620_variant max77620_wdt_data = { + .reg_onoff_cnfg2 = MAX77620_REG_ONOFFCNFG2, + .reg_cnfg_glbl2 = MAX77620_REG_CNFGGLBL2, + .reg_cnfg_glbl3 = MAX77620_REG_CNFGGLBL3, + .wdtc_mask = MAX77620_WDTC_MASK, + .bit_wd_rst_wk = MAX77620_ONOFFCNFG2_WD_RST_WK, + /* Set WDT clear in OFF and sleep mode */ + .cnfg_glbl2_cfg_bits = MAX77620_WDTSLPC | MAX77620_WDTOFFC, +}; + +static const struct max77620_variant max77714_wdt_data = { + .reg_onoff_cnfg2 = MAX77714_CNFG2_ONOFF, + .reg_cnfg_glbl2 = MAX77714_CNFG_GLBL2, + .reg_cnfg_glbl3 = MAX77714_CNFG_GLBL3, + .wdtc_mask = MAX77714_WDTC, + .bit_wd_rst_wk = MAX77714_WD_RST_WK, + /* Set WDT clear in sleep mode (there is no WDTOFFC on MAX77714) */ + .cnfg_glbl2_cfg_bits = MAX77714_WDTSLPC, +}; + static int max77620_wdt_start(struct watchdog_device *wdt_dev) { struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev); - return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, + return regmap_update_bits(wdt->rmap, wdt->drv_data->reg_cnfg_glbl2, MAX77620_WDTEN, MAX77620_WDTEN); } @@ -38,7 +81,7 @@ static int max77620_wdt_stop(struct watchdog_device *wdt_dev) { struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev); - return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, + return regmap_update_bits(wdt->rmap, wdt->drv_data->reg_cnfg_glbl2, MAX77620_WDTEN, 0); } @@ -46,8 +89,8 @@ static int max77620_wdt_ping(struct watchdog_device *wdt_dev) { struct max77620_wdt *wdt = watchdog_get_drvdata(wdt_dev); - return regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL3, - MAX77620_WDTC_MASK, 0x1); + return regmap_update_bits(wdt->rmap, wdt->drv_data->reg_cnfg_glbl3, + wdt->drv_data->wdtc_mask, 0x1); } static int max77620_wdt_set_timeout(struct watchdog_device *wdt_dev, @@ -80,12 +123,17 @@ static int max77620_wdt_set_timeout(struct watchdog_device *wdt_dev, break; } - ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL3, - MAX77620_WDTC_MASK, 0x1); + /* + * "If the value of TWD needs to be changed, clear the system + * watchdog timer first [...], then change the value of TWD." + * (MAX77714 datasheet but applies to MAX77620 too) + */ + ret = regmap_update_bits(wdt->rmap, wdt->drv_data->reg_cnfg_glbl3, + wdt->drv_data->wdtc_mask, 0x1); if (ret < 0) return ret; - ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, + ret = regmap_update_bits(wdt->rmap, wdt->drv_data->reg_cnfg_glbl2, MAX77620_TWD_MASK, regval); if (ret < 0) return ret; @@ -109,6 +157,7 @@ static const struct watchdog_ops max77620_wdt_ops = { static int max77620_wdt_probe(struct platform_device *pdev) { + const struct platform_device_id *id = platform_get_device_id(pdev); struct device *dev = &pdev->dev; struct max77620_wdt *wdt; struct watchdog_device *wdt_dev; @@ -120,6 +169,8 @@ static int max77620_wdt_probe(struct platform_device *pdev) return -ENOMEM; wdt->dev = dev; + wdt->drv_data = (const struct max77620_variant *) id->driver_data; + wdt->rmap = dev_get_regmap(dev->parent, NULL); if (!wdt->rmap) { dev_err(wdt->dev, "Failed to get parent regmap\n"); @@ -136,25 +187,25 @@ static int max77620_wdt_probe(struct platform_device *pdev) platform_set_drvdata(pdev, wdt); /* Enable WD_RST_WK - WDT expire results in a restart */ - ret = regmap_update_bits(wdt->rmap, MAX77620_REG_ONOFFCNFG2, - MAX77620_ONOFFCNFG2_WD_RST_WK, - MAX77620_ONOFFCNFG2_WD_RST_WK); + ret = regmap_update_bits(wdt->rmap, wdt->drv_data->reg_onoff_cnfg2, + wdt->drv_data->bit_wd_rst_wk, + wdt->drv_data->bit_wd_rst_wk); if (ret < 0) { dev_err(wdt->dev, "Failed to set WD_RST_WK: %d\n", ret); return ret; } - /* Set WDT clear in OFF and sleep mode */ - ret = regmap_update_bits(wdt->rmap, MAX77620_REG_CNFGGLBL2, - MAX77620_WDTOFFC | MAX77620_WDTSLPC, - MAX77620_WDTOFFC | MAX77620_WDTSLPC); + /* Set the "auto WDT clear" bits available on the chip */ + ret = regmap_update_bits(wdt->rmap, wdt->drv_data->reg_cnfg_glbl2, + wdt->drv_data->cnfg_glbl2_cfg_bits, + wdt->drv_data->cnfg_glbl2_cfg_bits); if (ret < 0) { dev_err(wdt->dev, "Failed to set WDT OFF mode: %d\n", ret); return ret; } /* Check if WDT running and if yes then set flags properly */ - ret = regmap_read(wdt->rmap, MAX77620_REG_CNFGGLBL2, ®val); + ret = regmap_read(wdt->rmap, wdt->drv_data->reg_cnfg_glbl2, ®val); if (ret < 0) { dev_err(wdt->dev, "Failed to read WDT CFG register: %d\n", ret); return ret; @@ -186,7 +237,8 @@ static int max77620_wdt_probe(struct platform_device *pdev) } static const struct platform_device_id max77620_wdt_devtype[] = { - { .name = "max77620-watchdog", }, + { "max77620-watchdog", (kernel_ulong_t)&max77620_wdt_data }, + { "max77714-watchdog", (kernel_ulong_t)&max77714_wdt_data }, { }, }; MODULE_DEVICE_TABLE(platform, max77620_wdt_devtype); @@ -208,4 +260,5 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_AUTHOR("Laxman Dewangan "); +MODULE_AUTHOR("Luca Ceresoli "); MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/iqs62x.h b/include/linux/mfd/iqs62x.h index 5ced55eae11b..ffc86010af74 100644 --- a/include/linux/mfd/iqs62x.h +++ b/include/linux/mfd/iqs62x.h @@ -14,6 +14,11 @@ #define IQS624_PROD_NUM 0x43 #define IQS625_PROD_NUM 0x4E +#define IQS620_HW_NUM_V0 0x82 +#define IQS620_HW_NUM_V1 IQS620_HW_NUM_V0 +#define IQS620_HW_NUM_V2 IQS620_HW_NUM_V0 +#define IQS620_HW_NUM_V3 0x92 + #define IQS621_ALS_FLAGS 0x16 #define IQS622_ALS_FLAGS 0x14 @@ -129,6 +134,8 @@ struct iqs62x_core { struct completion fw_done; enum iqs62x_ui_sel ui_sel; unsigned long event_cache; + u8 sw_num; + u8 hw_num; }; extern const struct iqs62x_event_desc iqs62x_events[IQS62X_NUM_EVENTS]; diff --git a/include/linux/mfd/max77686-private.h b/include/linux/mfd/max77686-private.h index b1482b3cf353..3acceeedbaba 100644 --- a/include/linux/mfd/max77686-private.h +++ b/include/linux/mfd/max77686-private.h @@ -152,7 +152,7 @@ enum max77686_rtc_reg { MAX77686_RTC_WEEKDAY = 0x0A, MAX77686_RTC_MONTH = 0x0B, MAX77686_RTC_YEAR = 0x0C, - MAX77686_RTC_DATE = 0x0D, + MAX77686_RTC_MONTHDAY = 0x0D, MAX77686_ALARM1_SEC = 0x0E, MAX77686_ALARM1_MIN = 0x0F, MAX77686_ALARM1_HOUR = 0x10, @@ -352,7 +352,7 @@ enum max77802_rtc_reg { MAX77802_RTC_WEEKDAY = 0xCA, MAX77802_RTC_MONTH = 0xCB, MAX77802_RTC_YEAR = 0xCC, - MAX77802_RTC_DATE = 0xCD, + MAX77802_RTC_MONTHDAY = 0xCD, MAX77802_RTC_AE1 = 0xCE, MAX77802_ALARM1_SEC = 0xCF, MAX77802_ALARM1_MIN = 0xD0, diff --git a/include/linux/mfd/max77714.h b/include/linux/mfd/max77714.h new file mode 100644 index 000000000000..a970dc455426 --- /dev/null +++ b/include/linux/mfd/max77714.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Maxim MAX77714 Register and data structures definition. + * + * Copyright (C) 2022 Luca Ceresoli + * Author: Luca Ceresoli + */ + +#ifndef __LINUX_MFD_MAX77714_H_ +#define __LINUX_MFD_MAX77714_H_ + +#include + +#define MAX77714_INT_TOP 0x00 +#define MAX77714_INT_TOPM 0x07 /* Datasheet says "read only", but it is RW */ + +#define MAX77714_INT_TOP_ONOFF BIT(1) +#define MAX77714_INT_TOP_RTC BIT(3) +#define MAX77714_INT_TOP_GPIO BIT(4) +#define MAX77714_INT_TOP_LDO BIT(5) +#define MAX77714_INT_TOP_SD BIT(6) +#define MAX77714_INT_TOP_GLBL BIT(7) + +#define MAX77714_32K_STATUS 0x30 +#define MAX77714_32K_STATUS_SIOSCOK BIT(5) +#define MAX77714_32K_STATUS_XOSCOK BIT(4) +#define MAX77714_32K_STATUS_32KSOURCE BIT(3) +#define MAX77714_32K_STATUS_32KLOAD_MSK 0x3 +#define MAX77714_32K_STATUS_32KLOAD_SHF 1 +#define MAX77714_32K_STATUS_CRYSTAL_CFG BIT(0) + +#define MAX77714_32K_CONFIG 0x31 +#define MAX77714_32K_CONFIG_XOSC_RETRY BIT(4) + +#define MAX77714_CNFG_GLBL2 0x91 +#define MAX77714_WDTEN BIT(2) +#define MAX77714_WDTSLPC BIT(3) +#define MAX77714_TWD_MASK 0x3 +#define MAX77714_TWD_2s 0x0 +#define MAX77714_TWD_16s 0x1 +#define MAX77714_TWD_64s 0x2 +#define MAX77714_TWD_128s 0x3 + +#define MAX77714_CNFG_GLBL3 0x92 +#define MAX77714_WDTC BIT(0) + +#define MAX77714_CNFG2_ONOFF 0x94 +#define MAX77714_WD_RST_WK BIT(5) + +/* Interrupts */ +enum { + MAX77714_IRQ_TOP_ONOFF, + MAX77714_IRQ_TOP_RTC, /* Real-time clock */ + MAX77714_IRQ_TOP_GPIO, /* GPIOs */ + MAX77714_IRQ_TOP_LDO, /* Low-dropout regulators */ + MAX77714_IRQ_TOP_SD, /* Step-down regulators */ + MAX77714_IRQ_TOP_GLBL, /* "Global resources": Low-Battery, overtemp... */ +}; + +#endif /* __LINUX_MFD_MAX77714_H_ */ diff --git a/include/linux/mfd/mt6358/registers.h b/include/linux/mfd/mt6358/registers.h index 201139b12140..3d33517f178c 100644 --- a/include/linux/mfd/mt6358/registers.h +++ b/include/linux/mfd/mt6358/registers.h @@ -94,6 +94,10 @@ #define MT6358_BUCK_VCORE_CON0 0x1488 #define MT6358_BUCK_VCORE_DBG0 0x149e #define MT6358_BUCK_VCORE_DBG1 0x14a0 +#define MT6358_BUCK_VCORE_SSHUB_CON0 0x14a4 +#define MT6358_BUCK_VCORE_SSHUB_CON1 0x14a6 +#define MT6358_BUCK_VCORE_SSHUB_ELR0 MT6358_BUCK_VCORE_SSHUB_CON1 +#define MT6358_BUCK_VCORE_SSHUB_DBG1 MT6358_BUCK_VCORE_DBG1 #define MT6358_BUCK_VCORE_ELR0 0x14aa #define MT6358_BUCK_VGPU_CON0 0x1508 #define MT6358_BUCK_VGPU_DBG0 0x151e @@ -169,6 +173,9 @@ #define MT6358_LDO_VSRAM_OTHERS_CON0 0x1ba6 #define MT6358_LDO_VSRAM_OTHERS_DBG0 0x1bc0 #define MT6358_LDO_VSRAM_OTHERS_DBG1 0x1bc2 +#define MT6358_LDO_VSRAM_OTHERS_SSHUB_CON0 0x1bc4 +#define MT6358_LDO_VSRAM_OTHERS_SSHUB_CON1 0x1bc6 +#define MT6358_LDO_VSRAM_OTHERS_SSHUB_DBG1 MT6358_LDO_VSRAM_OTHERS_DBG1 #define MT6358_LDO_VSRAM_GPU_CON0 0x1bc8 #define MT6358_LDO_VSRAM_GPU_DBG0 0x1be2 #define MT6358_LDO_VSRAM_GPU_DBG1 0x1be4 diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h index 56f210eebc54..1cf78726503b 100644 --- a/include/linux/mfd/mt6397/core.h +++ b/include/linux/mfd/mt6397/core.h @@ -14,6 +14,7 @@ enum chip_id { MT6323_CHIP_ID = 0x23, MT6358_CHIP_ID = 0x58, MT6359_CHIP_ID = 0x59, + MT6366_CHIP_ID = 0x66, MT6391_CHIP_ID = 0x91, MT6397_CHIP_ID = 0x97, };