MIPS: PowerTV: Base files for Cisco PowerTV platform

Add the Cisco Powertv cable settop box to the MIPS tree. This platform is
based on a MIPS 24Kc processor with various devices integrated on the same
ASIC. There are multiple models of this box, with differing configuration
but the same kernel runs across the product line.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/132/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
David VomLehn 2009-08-30 17:15:11 -07:00 committed by Ralf Baechle
parent 13e79b4622
commit a3a0f8c8ed
39 changed files with 6952 additions and 0 deletions

View file

@ -338,6 +338,24 @@ config PMC_YOSEMITE
Yosemite is an evaluation board for the RM9000x2 processor
manufactured by PMC-Sierra.
config POWERTV
bool "Cisco PowerTV"
select BOOT_ELF32
select CEVT_R4K
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select CSRC_POWERTV
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select USB_OHCI_LITTLE_ENDIAN
help
This enables support for the Cisco PowerTV Platform.
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
select ARC
@ -683,6 +701,7 @@ source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
source "arch/mips/powertv/Kconfig"
source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
source "arch/mips/txx9/Kconfig"
@ -782,6 +801,9 @@ config CSRC_BCM1480
config CSRC_IOASIC
bool
config CSRC_POWERTV
bool
config CSRC_R4K_LIB
bool

View file

@ -444,6 +444,13 @@ cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
core-$(CONFIG_NEC_MARKEINS) += arch/mips/emma/markeins/
load-$(CONFIG_NEC_MARKEINS) += 0xffffffff88100000
#
# Cisco PowerTV Platform
#
core-$(CONFIG_POWERTV) += arch/mips/powertv/
cflags-$(CONFIG_POWERTV) += -I$(srctree)/arch/mips/include/asm/mach-powertv
load-$(CONFIG_POWERTV) += 0xffffffff90800000
#
# SGI IP22 (Indy/Indigo2)
#

File diff suppressed because it is too large Load diff

View file

@ -0,0 +1,107 @@
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ASM_MACH_POWERTV_ASIC_H
#define _ASM_MACH_POWERTV_ASIC_H
#include <linux/ioport.h>
#include <asm/mach-powertv/asic_regs.h>
#define DVR_CAPABLE (1<<0)
#define PCIE_CAPABLE (1<<1)
#define FFS_CAPABLE (1<<2)
#define DISPLAY_CAPABLE (1<<3)
/* Platform Family types
* For compitability, the new value must be added in the end */
enum family_type {
FAMILY_8500,
FAMILY_8500RNG,
FAMILY_4500,
FAMILY_1500,
FAMILY_8600,
FAMILY_4600,
FAMILY_4600VZA,
FAMILY_8600VZB,
FAMILY_1500VZE,
FAMILY_1500VZF,
FAMILIES
};
/* Register maps for each ASIC */
extern const struct register_map calliope_register_map;
extern const struct register_map cronus_register_map;
extern const struct register_map zeus_register_map;
extern struct resource dvr_cronus_resources[];
extern struct resource dvr_zeus_resources[];
extern struct resource non_dvr_calliope_resources[];
extern struct resource non_dvr_cronus_resources[];
extern struct resource non_dvr_cronuslite_resources[];
extern struct resource non_dvr_vz_calliope_resources[];
extern struct resource non_dvr_vze_calliope_resources[];
extern struct resource non_dvr_vzf_calliope_resources[];
extern struct resource non_dvr_zeus_resources[];
extern void powertv_platform_init(void);
extern void platform_alloc_bootmem(void);
extern enum asic_type platform_get_asic(void);
extern enum family_type platform_get_family(void);
extern int platform_supports_dvr(void);
extern int platform_supports_ffs(void);
extern int platform_supports_pcie(void);
extern int platform_supports_display(void);
extern void configure_platform(void);
extern void platform_configure_usb_ehci(void);
extern void platform_unconfigure_usb_ehci(void);
extern void platform_configure_usb_ohci(void);
extern void platform_unconfigure_usb_ohci(void);
/* Platform Resources */
#define ASIC_RESOURCE_GET_EXISTS 1
extern struct resource *asic_resource_get(const char *name);
extern void platform_release_memory(void *baddr, int size);
/* Reboot Cause */
extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
extern void set_locked_reboot_cause(char code, unsigned int data,
unsigned int data2);
enum sys_reboot_type {
sys_unknown_reboot = 0x00, /* Unknown reboot cause */
sys_davic_change = 0x01, /* Reboot due to change in DAVIC
* mode */
sys_user_reboot = 0x02, /* Reboot initiated by user */
sys_system_reboot = 0x03, /* Reboot initiated by OS */
sys_trap_reboot = 0x04, /* Reboot due to a CPU trap */
sys_silent_reboot = 0x05, /* Silent reboot */
sys_boot_ldr_reboot = 0x06, /* Bootloader reboot */
sys_power_up_reboot = 0x07, /* Power on bootup. Older
* drivers may report as
* userReboot. */
sys_code_change = 0x08, /* Reboot to take code change.
* Older drivers may report as
* userReboot. */
sys_hardware_reset = 0x09, /* HW watchdog or front-panel
* reset button reset. Older
* drivers may report as
* userReboot. */
sys_watchdogInterrupt = 0x0A /* Pre-watchdog interrupt */
};
#endif /* _ASM_MACH_POWERTV_ASIC_H */

View file

@ -0,0 +1,155 @@
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ASM_MACH_POWERTV_ASIC_H_
#define __ASM_MACH_POWERTV_ASIC_H_
#include <linux/io.h>
/* ASIC types */
enum asic_type {
ASIC_UNKNOWN,
ASIC_ZEUS,
ASIC_CALLIOPE,
ASIC_CRONUS,
ASIC_CRONUSLITE,
ASICS
};
/* hardcoded values read from Chip Version registers */
#define CRONUS_10 0x0B4C1C20
#define CRONUS_11 0x0B4C1C21
#define CRONUSLITE_10 0x0B4C1C40
#define NAND_FLASH_BASE 0x03000000
#define ZEUS_IO_BASE 0x09000000
#define CALLIOPE_IO_BASE 0x08000000
#define CRONUS_IO_BASE 0x09000000
#define ASIC_IO_SIZE 0x01000000
/* Definitions for backward compatibility */
#define UART1_INTSTAT uart1_intstat
#define UART1_INTEN uart1_inten
#define UART1_CONFIG1 uart1_config1
#define UART1_CONFIG2 uart1_config2
#define UART1_DIVISORHI uart1_divisorhi
#define UART1_DIVISORLO uart1_divisorlo
#define UART1_DATA uart1_data
#define UART1_STATUS uart1_status
/* ASIC register enumeration */
struct register_map {
u32 eic_slow0_strt_add;
u32 eic_cfg_bits;
u32 eic_ready_status;
u32 chipver3;
u32 chipver2;
u32 chipver1;
u32 chipver0;
u32 uart1_intstat;
u32 uart1_inten;
u32 uart1_config1;
u32 uart1_config2;
u32 uart1_divisorhi;
u32 uart1_divisorlo;
u32 uart1_data;
u32 uart1_status;
u32 int_stat_3;
u32 int_stat_2;
u32 int_stat_1;
u32 int_stat_0;
u32 int_config;
u32 int_int_scan;
u32 ien_int_3;
u32 ien_int_2;
u32 ien_int_1;
u32 ien_int_0;
u32 int_level_3_3;
u32 int_level_3_2;
u32 int_level_3_1;
u32 int_level_3_0;
u32 int_level_2_3;
u32 int_level_2_2;
u32 int_level_2_1;
u32 int_level_2_0;
u32 int_level_1_3;
u32 int_level_1_2;
u32 int_level_1_1;
u32 int_level_1_0;
u32 int_level_0_3;
u32 int_level_0_2;
u32 int_level_0_1;
u32 int_level_0_0;
u32 int_docsis_en;
u32 mips_pll_setup;
u32 usb_fs;
u32 test_bus;
u32 crt_spare;
u32 usb2_ohci_int_mask;
u32 usb2_strap;
u32 ehci_hcapbase;
u32 ohci_hc_revision;
u32 bcm1_bs_lmi_steer;
u32 usb2_control;
u32 usb2_stbus_obc;
u32 usb2_stbus_mess_size;
u32 usb2_stbus_chunk_size;
u32 pcie_regs;
u32 tim_ch;
u32 tim_cl;
u32 gpio_dout;
u32 gpio_din;
u32 gpio_dir;
u32 watchdog;
u32 front_panel;
u32 register_maps;
};
extern enum asic_type asic;
extern const struct register_map *register_map;
extern unsigned long asic_phy_base; /* Physical address of ASIC */
extern unsigned long asic_base; /* Virtual address of ASIC */
/*
* Macros to interface to registers through their ioremapped address
* asic_reg_offset Returns the offset of a given register from the start
* of the ASIC address space
* asic_reg_phys_addr Returns the physical address of the given register
* asic_reg_addr Returns the iomapped virtual address of the given
* register.
*/
#define asic_reg_offset(x) (register_map->x)
#define asic_reg_phys_addr(x) (asic_phy_base + asic_reg_offset(x))
#define asic_reg_addr(x) \
((unsigned int *) (asic_base + asic_reg_offset(x)))
/*
* The asic_reg macro is gone. It should be replaced by either asic_read or
* asic_write, as appropriate.
*/
#define asic_read(x) readl(asic_reg_addr(x))
#define asic_write(v, x) writel(v, asic_reg_addr(x))
extern void asic_irq_init(void);
#endif

View file

@ -0,0 +1,119 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Version from mach-generic modified to support PowerTV port
* Portions Copyright (C) 2009 Cisco Systems, Inc.
* Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
*
*/
#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
#include <linux/sched.h>
#include <linux/version.h>
#include <linux/device.h>
#include <asm/mach-powertv/asic.h>
static inline bool is_kseg2(void *addr)
{
return (unsigned long)addr >= KSEG2;
}
static inline unsigned long virt_to_phys_from_pte(void *addr)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
pte_t *ptep, pte;
unsigned long virt_addr = (unsigned long)addr;
unsigned long phys_addr = 0UL;
/* get the page global directory. */
pgd = pgd_offset_k(virt_addr);
if (!pgd_none(*pgd)) {
/* get the page upper directory */
pud = pud_offset(pgd, virt_addr);
if (!pud_none(*pud)) {
/* get the page middle directory */
pmd = pmd_offset(pud, virt_addr);
if (!pmd_none(*pmd)) {
/* get a pointer to the page table entry */
ptep = pte_offset(pmd, virt_addr);
pte = *ptep;
/* check for a valid page */
if (pte_present(pte)) {
/* get the physical address the page is
* refering to */
phys_addr = (unsigned long)
page_to_phys(pte_page(pte));
/* add the offset within the page */
phys_addr |= (virt_addr & ~PAGE_MASK);
}
}
}
}
return phys_addr;
}
static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
size_t size)
{
if (is_kseg2(addr))
return phys_to_bus(virt_to_phys_from_pte(addr));
else
return phys_to_bus(virt_to_phys(addr));
}
static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
struct page *page)
{
return phys_to_bus(page_to_phys(page));
}
static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
dma_addr_t dma_addr)
{
return bus_to_phys(dma_addr);
}
static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
size_t size, enum dma_data_direction direction)
{
}
static inline int plat_dma_supported(struct device *dev, u64 mask)
{
/*
* we fall back to GFP_DMA when the mask isn't all 1s,
* so we can't guarantee allocations that must be
* within a tighter range than GFP_DMA..
*/
if (mask < DMA_BIT_MASK(24))
return 0;
return 1;
}
static inline void plat_extra_sync_for_device(struct device *dev)
{
return;
}
static inline int plat_dma_mapping_error(struct device *dev,
dma_addr_t dma_addr)
{
return 0;
}
static inline int plat_device_is_coherent(struct device *dev)
{
return 0;
}
#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */

View file

@ -0,0 +1,254 @@
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ASM_MACH_POWERTV_INTERRUPTS_H_
#define _ASM_MACH_POWERTV_INTERRUPTS_H_
/*
* Defines for all of the interrupt lines
*/
/* Definitions for backward compatibility */
#define kIrq_Uart1 irq_uart1
#define ibase 0
/*------------- Register: int_stat_3 */
/* 126 unused (bit 31) */
#define irq_asc2video (ibase+126) /* ASC 2 Video Interrupt */
#define irq_asc1video (ibase+125) /* ASC 1 Video Interrupt */
#define irq_comms_block_wd (ibase+124) /* ASC 1 Video Interrupt */
#define irq_fdma_mailbox (ibase+123) /* FDMA Mailbox Output */
#define irq_fdma_gp (ibase+122) /* FDMA GP Output */
#define irq_mips_pic (ibase+121) /* MIPS Performance Counter
* Interrupt */
#define irq_mips_timer (ibase+120) /* MIPS Timer Interrupt */
#define irq_memory_protect (ibase+119) /* Memory Protection Interrupt
* -- Ored by glue logic inside
* SPARC ILC (see
* INT_MEM_PROT_STAT, below,
* for individual interrupts)
*/
/* 118 unused (bit 22) */
#define irq_sbag (ibase+117) /* SBAG Interrupt -- Ored by
* glue logic inside SPARC ILC
* (see INT_SBAG_STAT, below,
* for individual interrupts) */
#define irq_qam_b_fec (ibase+116) /* QAM B FEC Interrupt */
#define irq_qam_a_fec (ibase+115) /* QAM A FEC Interrupt */
/* 114 unused (bit 18) */
#define irq_mailbox (ibase+113) /* Mailbox Debug Interrupt --
* Ored by glue logic inside
* SPARC ILC (see
* INT_MAILBOX_STAT, below, for
* individual interrupts) */
#define irq_fuse_stat1 (ibase+112) /* Fuse Status 1 */
#define irq_fuse_stat2 (ibase+111) /* Fuse Status 2 */
#define irq_fuse_stat3 (ibase+110) /* Blitter Interrupt / Fuse
* Status 3 */
#define irq_blitter (ibase+110) /* Blitter Interrupt / Fuse
* Status 3 */
#define irq_avc1_pp0 (ibase+109) /* AVC Decoder #1 PP0
* Interrupt */
#define irq_avc1_pp1 (ibase+108) /* AVC Decoder #1 PP1
* Interrupt */
#define irq_avc1_mbe (ibase+107) /* AVC Decoder #1 MBE
* Interrupt */
#define irq_avc2_pp0 (ibase+106) /* AVC Decoder #2 PP0
* Interrupt */
#define irq_avc2_pp1 (ibase+105) /* AVC Decoder #2 PP1
* Interrupt */
#define irq_avc2_mbe (ibase+104) /* AVC Decoder #2 MBE
* Interrupt */
#define irq_zbug_spi (ibase+103) /* Zbug SPI Slave Interrupt */
#define irq_qam_mod2 (ibase+102) /* QAM Modulator 2 DMA
* Interrupt */
#define irq_ir_rx (ibase+101) /* IR RX 2 Interrupt */
#define irq_aud_dsp2 (ibase+100) /* Audio DSP #2 Interrupt */
#define irq_aud_dsp1 (ibase+99) /* Audio DSP #1 Interrupt */
#define irq_docsis (ibase+98) /* DOCSIS Debug Interrupt */
#define irq_sd_dvp1 (ibase+97) /* SD DVP #1 Interrupt */
#define irq_sd_dvp2 (ibase+96) /* SD DVP #2 Interrupt */
/*------------- Register: int_stat_2 */
#define irq_hd_dvp (ibase+95) /* HD DVP Interrupt */
#define kIrq_Prewatchdog (ibase+94) /* watchdog Pre-Interrupt */
#define irq_timer2 (ibase+93) /* Programmable Timer
* Interrupt 2 */
#define irq_1394 (ibase+92) /* 1394 Firewire Interrupt */
#define irq_usbohci (ibase+91) /* USB 2.0 OHCI Interrupt */
#define irq_usbehci (ibase+90) /* USB 2.0 EHCI Interrupt */
#define irq_pciexp (ibase+89) /* PCI Express 0 Interrupt */
#define irq_pciexp0 (ibase+89) /* PCI Express 0 Interrupt */
#define irq_afe1 (ibase+88) /* AFE 1 Interrupt */
#define irq_sata (ibase+87) /* SATA 1 Interrupt */
#define irq_sata1 (ibase+87) /* SATA 1 Interrupt */
#define irq_dtcp (ibase+86) /* DTCP Interrupt */
#define irq_pciexp1 (ibase+85) /* PCI Express 1 Interrupt */
/* 84 unused (bit 20) */
/* 83 unused (bit 19) */
/* 82 unused (bit 18) */
#define irq_sata2 (ibase+81) /* SATA2 Interrupt */
#define irq_uart2 (ibase+80) /* UART2 Interrupt */
#define irq_legacy_usb (ibase+79) /* Legacy USB Host ISR (1.1
* Host module) */
#define irq_pod (ibase+78) /* POD Interrupt */
#define irq_slave_usb (ibase+77) /* Slave USB */
#define irq_denc1 (ibase+76) /* DENC #1 VTG Interrupt */
#define irq_vbi_vtg (ibase+75) /* VBI VTG Interrupt */
#define irq_afe2 (ibase+74) /* AFE 2 Interrupt */
#define irq_denc2 (ibase+73) /* DENC #2 VTG Interrupt */
#define irq_asc2 (ibase+72) /* ASC #2 Interrupt */
#define irq_asc1 (ibase+71) /* ASC #1 Interrupt */
#define irq_mod_dma (ibase+70) /* Modulator DMA Interrupt */
#define irq_byte_eng1 (ibase+69) /* Byte Engine Interrupt [1] */
#define irq_byte_eng0 (ibase+68) /* Byte Engine Interrupt [0] */
/* 67 unused (bit 03) */
/* 66 unused (bit 02) */
/* 65 unused (bit 01) */
/* 64 unused (bit 00) */
/*------------- Register: int_stat_1 */
/* 63 unused (bit 31) */
/* 62 unused (bit 30) */
/* 61 unused (bit 29) */
/* 60 unused (bit 28) */
/* 59 unused (bit 27) */
/* 58 unused (bit 26) */
/* 57 unused (bit 25) */
/* 56 unused (bit 24) */
#define irq_buf_dma_mem2mem (ibase+55) /* BufDMA Memory to Memory
* Interrupt */
#define irq_buf_dma_usbtransmit (ibase+54) /* BufDMA USB Transmit
* Interrupt */
#define irq_buf_dma_qpskpodtransmit (ibase+53) /* BufDMA QPSK/POD Tramsit
* Interrupt */
#define irq_buf_dma_transmit_error (ibase+52) /* BufDMA Transmit Error
* Interrupt */
#define irq_buf_dma_usbrecv (ibase+51) /* BufDMA USB Receive
* Interrupt */
#define irq_buf_dma_qpskpodrecv (ibase+50) /* BufDMA QPSK/POD Receive
* Interrupt */
#define irq_buf_dma_recv_error (ibase+49) /* BufDMA Receive Error
* Interrupt */
#define irq_qamdma_transmit_play (ibase+48) /* QAMDMA Transmit/Play
* Interrupt */
#define irq_qamdma_transmit_error (ibase+47) /* QAMDMA Transmit Error
* Interrupt */
#define irq_qamdma_recv2high (ibase+46) /* QAMDMA Receive 2 High
* (Chans 63-32) */
#define irq_qamdma_recv2low (ibase+45) /* QAMDMA Receive 2 Low
* (Chans 31-0) */
#define irq_qamdma_recv1high (ibase+44) /* QAMDMA Receive 1 High
* (Chans 63-32) */
#define irq_qamdma_recv1low (ibase+43) /* QAMDMA Receive 1 Low
* (Chans 31-0) */
#define irq_qamdma_recv_error (ibase+42) /* QAMDMA Receive Error
* Interrupt */
#define irq_mpegsplice (ibase+41) /* MPEG Splice Interrupt */
#define irq_deinterlace_rdy (ibase+40) /* Deinterlacer Frame Ready
* Interrupt */
#define irq_ext_in0 (ibase+39) /* External Interrupt irq_in0 */
#define irq_gpio3 (ibase+38) /* GP I/O IRQ 3 - From GP I/O
* Module */
#define irq_gpio2 (ibase+37) /* GP I/O IRQ 2 - From GP I/O
* Module (ABE_intN) */
#define irq_pcrcmplt1 (ibase+36) /* PCR Capture Complete or
* Discontinuity 1 */
#define irq_pcrcmplt2 (ibase+35) /* PCR Capture Complete or
* Discontinuity 2 */
#define irq_parse_peierr (ibase+34) /* PID Parser Error Detect
* (PEI) */
#define irq_parse_cont_err (ibase+33) /* PID Parser continuity error
* detect */
#define irq_ds1framer (ibase+32) /* DS1 Framer Interrupt */
/*------------- Register: int_stat_0 */
#define irq_gpio1 (ibase+31) /* GP I/O IRQ 1 - From GP I/O
* Module */
#define irq_gpio0 (ibase+30) /* GP I/O IRQ 0 - From GP I/O
* Module */
#define irq_qpsk_out_aloha (ibase+29) /* QPSK Output Slotted Aloha
* (chan 3) Transmission
* Completed OK */
#define irq_qpsk_out_tdma (ibase+28) /* QPSK Output TDMA (chan 2)
* Transmission Completed OK */
#define irq_qpsk_out_reserve (ibase+27) /* QPSK Output Reservation
* (chan 1) Transmission
* Completed OK */
#define irq_qpsk_out_aloha_err (ibase+26) /* QPSK Output Slotted Aloha
* (chan 3)Transmission
* completed with Errors. */
#define irq_qpsk_out_tdma_err (ibase+25) /* QPSK Output TDMA (chan 2)
* Transmission completed with
* Errors. */
#define irq_qpsk_out_rsrv_err (ibase+24) /* QPSK Output Reservation
* (chan 1) Transmission
* completed with Errors */
#define irq_aloha_fail (ibase+23) /* Unsuccessful Resend of Aloha
* for N times. Aloha retry
* timeout for channel 3. */
#define irq_timer1 (ibase+22) /* Programmable Timer
* Interrupt */
#define irq_keyboard (ibase+21) /* Keyboard Module Interrupt */
#define irq_i2c (ibase+20) /* I2C Module Interrupt */
#define irq_spi (ibase+19) /* SPI Module Interrupt */
#define irq_irblaster (ibase+18) /* IR Blaster Interrupt */
#define irq_splice_detect (ibase+17) /* PID Key Change Interrupt or
* Splice Detect Interrupt */
#define irq_se_micro (ibase+16) /* Secure Micro I/F Module
* Interrupt */
#define irq_uart1 (ibase+15) /* UART Interrupt */
#define irq_irrecv (ibase+14) /* IR Receiver Interrupt */
#define irq_host_int1 (ibase+13) /* Host-to-Host Interrupt 1 */
#define irq_host_int0 (ibase+12) /* Host-to-Host Interrupt 0 */
#define irq_qpsk_hecerr (ibase+11) /* QPSK HEC Error Interrupt */
#define irq_qpsk_crcerr (ibase+10) /* QPSK AAL-5 CRC Error
* Interrupt */
/* 9 unused (bit 09) */
/* 8 unused (bit 08) */
#define irq_psicrcerr (ibase+7) /* QAM PSI CRC Error
* Interrupt */
#define irq_psilength_err (ibase+6) /* QAM PSI Length Error
* Interrupt */
#define irq_esfforward (ibase+5) /* ESF Interrupt Mark From
* Forward Path Reference -
* every 3ms when forward Mbits
* and forward slot control
* bytes are updated. */
#define irq_esfreverse (ibase+4) /* ESF Interrupt Mark from
* Reverse Path Reference -
* delayed from forward mark by
* the ranging delay plus a
* fixed amount. When reverse
* Mbits and reverse slot
* control bytes are updated.
* Occurs every 3ms for 3.0M and
* 1.554 M upstream rates and
* every 6 ms for 256K upstream
* rate. */
#define irq_aloha_timeout (ibase+3) /* Slotted-Aloha timeout on
* Channel 1. */
#define irq_reservation (ibase+2) /* Partial (or Incremental)
* Reservation Message Completed
* or Slotted aloha verify for
* channel 1. */
#define irq_aloha3 (ibase+1) /* Slotted-Aloha Message Verify
* Interrupt or Reservation
* increment completed for
* channel 3. */
#define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */
#endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */

View file

@ -0,0 +1,90 @@
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Portions Copyright (C) Cisco Systems, Inc.
*/
#ifndef __ASM_MACH_POWERTV_IOREMAP_H
#define __ASM_MACH_POWERTV_IOREMAP_H
#include <linux/types.h>
#define LOW_MEM_BOUNDARY_PHYS 0x20000000
#define LOW_MEM_BOUNDARY_MASK (~(LOW_MEM_BOUNDARY_PHYS - 1))
/*
* The bus addresses are different than the physical addresses that
* the processor sees by an offset. This offset varies by ASIC
* version. Define a variable to hold the offset and some macros to
* make the conversion simpler. */
extern unsigned long phys_to_bus_offset;
#ifdef CONFIG_HIGHMEM
#define MEM_GAP_PHYS 0x60000000
/*
* TODO: We will use the hard code for conversion between physical and
* bus until the bootloader releases their device tree to us.
*/
#define phys_to_bus(x) (((x) < LOW_MEM_BOUNDARY_PHYS) ? \
((x) + phys_to_bus_offset) : (x))
#define bus_to_phys(x) (((x) < MEM_GAP_PHYS_ADDR) ? \
((x) - phys_to_bus_offset) : (x))
#else
#define phys_to_bus(x) ((x) + phys_to_bus_offset)
#define bus_to_phys(x) ((x) - phys_to_bus_offset)
#endif
/*
* Determine whether the address we are given is for an ASIC device
* Params: addr Address to check
* Returns: Zero if the address is not for ASIC devices, non-zero
* if it is.
*/
static inline int asic_is_device_addr(phys_t addr)
{
return !((phys_t)addr & (phys_t) LOW_MEM_BOUNDARY_MASK);
}
/*
* Determine whether the address we are given is external RAM mappable
* into KSEG1.
* Params: addr Address to check
* Returns: Zero if the address is not for external RAM and
*/
static inline int asic_is_lowmem_ram_addr(phys_t addr)
{
/*
* The RAM always starts at the following address in the processor's
* physical address space
*/
static const phys_t phys_ram_base = 0x10000000;
phys_t bus_ram_base;
bus_ram_base = phys_to_bus_offset + phys_ram_base;
return addr >= bus_ram_base &&
addr < (bus_ram_base + (LOW_MEM_BOUNDARY_PHYS - phys_ram_base));
}
/*
* Allow physical addresses to be fixed up to help peripherals located
* outside the low 32-bit range -- generic pass-through version.
*/
static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
return phys_addr;
}
static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size,
unsigned long flags)
{
return NULL;
}
static inline int plat_iounmap(const volatile void __iomem *addr)
{
return 0;
}
#endif /* __ASM_MACH_POWERTV_IOREMAP_H */

View file

@ -0,0 +1,25 @@
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _ASM_MACH_POWERTV_IRQ_H
#define _ASM_MACH_POWERTV_IRQ_H
#include <asm/mach-powertv/interrupts.h>
#define MIPS_CPU_IRQ_BASE ibase
#define NR_IRQS 127
#endif

View file

@ -0,0 +1,29 @@
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Local definitions for the powertv PCI code
*/
#ifndef _POWERTV_PCI_POWERTV_PCI_H_
#define _POWERTV_PCI_POWERTV_PCI_H_
extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
extern int asic_pcie_init(void);
extern int asic_pcie_init(void);
extern int log_level;
#endif

View file

@ -0,0 +1,28 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* This version for the PowerTV platform copied from the Malta version.
*
* Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
* Portions copyright (C) 2009 Cisco Systems, Inc.
*/
#ifndef __ASM_MACH_POWERTV_WAR_H
#define __ASM_MACH_POWERTV_WAR_H
#define R4600_V1_INDEX_ICACHEOP_WAR 0
#define R4600_V1_HIT_CACHEOP_WAR 0
#define R4600_V2_HIT_CACHEOP_WAR 0
#define R5432_CP0_INTERRUPT_WAR 0
#define BCM1250_M3_WAR 0
#define SIBYTE_1956_WAR 0
#define MIPS4K_ICACHE_REFILL_WAR 1
#define MIPS_CACHE_SYNC_WAR 1
#define TX49XX_ICACHE_INDEX_INV_WAR 0
#define RM9000_CDEX_SMP_WAR 0
#define ICACHE_REFILLS_WORKAROUND_WAR 1
#define R10000_LLSC_WAR 0
#define MIPS34K_MISSED_ITLB_WAR 0
#endif /* __ASM_MACH_POWERTV_WAR_H */

View file

@ -19,6 +19,7 @@ obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
obj-$(CONFIG_CSRC_IOASIC) += csrc-ioasic.o
obj-$(CONFIG_CSRC_POWERTV) += csrc-powertv.o
obj-$(CONFIG_CSRC_R4K_LIB) += csrc-r4k.o
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
obj-$(CONFIG_SYNC_R4K) += sync-r4k.o

View file

@ -0,0 +1,180 @@
/*
* Copyright (C) 2008 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* The file comes from kernel/csrc-r4k.c
*/
#include <linux/clocksource.h>
#include <linux/init.h>
#include <asm/time.h> /* Not included in linux/time.h */
#include <asm/mach-powertv/asic_regs.h>
#include "powertv-clock.h"
/* MIPS PLL Register Definitions */
#define PLL_GET_M(x) (((x) >> 8) & 0x000000FF)
#define PLL_GET_N(x) (((x) >> 16) & 0x000000FF)
#define PLL_GET_P(x) (((x) >> 24) & 0x00000007)
/*
* returns: Clock frequency in kHz
*/
unsigned int __init mips_get_pll_freq(void)
{
unsigned int pll_reg, m, n, p;
unsigned int fin = 54000; /* Base frequency in kHz */
unsigned int fout;
/* Read PLL register setting */
pll_reg = asic_read(mips_pll_setup);
m = PLL_GET_M(pll_reg);
n = PLL_GET_N(pll_reg);
p = PLL_GET_P(pll_reg);
pr_info("MIPS PLL Register:0x%x M=%d N=%d P=%d\n", pll_reg, m, n, p);
/* Calculate clock frequency = (2 * N * 54MHz) / (M * (2**P)) */
fout = ((2 * n * fin) / (m * (0x01 << p)));
pr_info("MIPS Clock Freq=%d kHz\n", fout);
return fout;
}
static cycle_t c0_hpt_read(struct clocksource *cs)
{
return read_c0_count();
}
static struct clocksource clocksource_mips = {
.name = "powertv-counter",
.read = c0_hpt_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void __init powertv_c0_hpt_clocksource_init(void)
{
unsigned int pll_freq = mips_get_pll_freq();
pr_info("CPU frequency %d.%02d MHz\n", pll_freq / 1000,
(pll_freq % 1000) * 100 / 1000);
mips_hpt_frequency = pll_freq / 2 * 1000;
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
clocksource_register(&clocksource_mips);
}
/**
* struct tim_c - free running counter
* @hi: High 16 bits of the counter
* @lo: Low 32 bits of the counter
*
* Lays out the structure of the free running counter in memory. This counter
* increments at a rate of 27 MHz/8 on all platforms.
*/
struct tim_c {
unsigned int hi;
unsigned int lo;
};
static struct tim_c *tim_c;
static cycle_t tim_c_read(struct clocksource *cs)
{
unsigned int hi;
unsigned int next_hi;
unsigned int lo;
hi = readl(&tim_c->hi);
for (;;) {
lo = readl(&tim_c->lo);
next_hi = readl(&tim_c->hi);
if (next_hi == hi)
break;
hi = next_hi;
}
pr_crit("%s: read %llx\n", __func__, ((u64) hi << 32) | lo);
return ((u64) hi << 32) | lo;
}
#define TIM_C_SIZE 48 /* # bits in the timer */
static struct clocksource clocksource_tim_c = {
.name = "powertv-tim_c",
.read = tim_c_read,
.mask = CLOCKSOURCE_MASK(TIM_C_SIZE),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/**
* powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock
*
* The hard part here is coming up with a constant k and shift s such that
* the 48-bit TIM_C value multiplied by k doesn't overflow and that value,
* when shifted right by s, yields the corresponding number of nanoseconds.
* We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to
* 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the
* number of nanoseconds. Since the TIM_C value has 48 bits and the math is
* done in 64 bits, avoiding an overflow means that k must be less than
* 64 - 48 = 16 bits.
*/
static void __init powertv_tim_c_clocksource_init(void)
{
int prescale;
unsigned long dividend;
unsigned long k;
int s;
const int max_k_bits = (64 - 48) - 1;
const unsigned long billion = 1000000000;
const unsigned long counts_per_second = 27000000 / 8;
prescale = BITS_PER_LONG - ilog2(billion) - 1;
dividend = billion << prescale;
k = dividend / counts_per_second;
s = ilog2(k) - max_k_bits;
if (s < 0)
s = prescale;
else {
k >>= s;
s += prescale;
}
clocksource_tim_c.mult = k;
clocksource_tim_c.shift = s;
clocksource_tim_c.rating = 200;
clocksource_register(&clocksource_tim_c);
tim_c = (struct tim_c *) asic_reg_addr(tim_ch);
}
/**
powertv_clocksource_init - initialize all clocksources
*/
void __init powertv_clocksource_init(void)
{
powertv_c0_hpt_clocksource_init();
powertv_tim_c_clocksource_init();
}

21
arch/mips/powertv/Kconfig Normal file
View file

@ -0,0 +1,21 @@
source "arch/mips/powertv/asic/Kconfig"
config BOOTLOADER_DRIVER
bool "PowerTV Bootloader Driver Support"
default n
depends on POWERTV
help
Use this option if you want to load bootloader driver.
config BOOTLOADER_FAMILY
string "POWERTV Bootloader Family string"
default "85"
depends on POWERTV && !BOOTLOADER_DRIVER
help
This value should be specified when the bootloader driver is disabled
and must be exactly two characters long. Families supported are:
R1 - RNG-100 R2 - RNG-200
A1 - Class A B1 - Class B
E1 - Class E F1 - Class F
44 - 45xx 46 - 46xx
85 - 85xx 86 - 86xx

View file

@ -0,0 +1,28 @@
#
# Carsten Langgaard, carstenl@mips.com
# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
#
# Carsten Langgaard, carstenl@mips.com
# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
# Portions copyright (C) 2009 Cisco Systems, Inc.
#
# This program is free software; you can distribute it and/or modify it
# under the terms of the GNU General Public License (Version 2) as
# published by the Free Software Foundation.
#
# This program is distributed in the hope it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
#
# Makefile for the Cisco PowerTV-specific kernel interface routines
# under Linux.
#
obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
EXTRA_CFLAGS += -Wall -Werror

View file

@ -0,0 +1,28 @@
config MIN_RUNTIME_RESOURCES
bool "Support for minimum runtime resources"
default n
depends on POWERTV
help
Enables support for minimizing the number of (SA asic) runtime
resources that are preallocated by the kernel.
config MIN_RUNTIME_DOCSIS
bool "Support for minimum DOCSIS resource"
default y
depends on MIN_RUNTIME_RESOURCES
help
Enables support for the preallocated DOCSIS resource.
config MIN_RUNTIME_PMEM
bool "Support for minimum PMEM resource"
default y
depends on MIN_RUNTIME_RESOURCES
help
Enables support for the preallocated Memory resource.
config MIN_RUNTIME_TFTP
bool "Support for minimum TFTP resource"
default y
depends on MIN_RUNTIME_RESOURCES
help
Enables support for the preallocated TFTP resource.

View file

@ -0,0 +1,23 @@
#
# Copyright (C) 2009 Scientific-Atlanta, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
obj-y += asic-calliope.o asic-cronus.o asic-zeus.o asic_devices.o asic_int.o \
irq_asic.o prealloc-calliope.o prealloc-cronus.o \
prealloc-cronuslite.o prealloc-zeus.o
EXTRA_CFLAGS += -Wall -Werror

View file

@ -0,0 +1,98 @@
/*
* Locations of devices in the Calliope ASIC.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*/
#include <asm/mach-powertv/asic.h>
const struct register_map calliope_register_map = {
.eic_slow0_strt_add = 0x800000,
.eic_cfg_bits = 0x800038,
.eic_ready_status = 0x80004c,
.chipver3 = 0xA00800,
.chipver2 = 0xA00804,
.chipver1 = 0xA00808,
.chipver0 = 0xA0080c,
/* The registers of IRBlaster */
.uart1_intstat = 0xA01800,
.uart1_inten = 0xA01804,
.uart1_config1 = 0xA01808,
.uart1_config2 = 0xA0180C,
.uart1_divisorhi = 0xA01810,
.uart1_divisorlo = 0xA01814,
.uart1_data = 0xA01818,
.uart1_status = 0xA0181C,
.int_stat_3 = 0xA02800,
.int_stat_2 = 0xA02804,
.int_stat_1 = 0xA02808,
.int_stat_0 = 0xA0280c,
.int_config = 0xA02810,
.int_int_scan = 0xA02818,
.ien_int_3 = 0xA02830,
.ien_int_2 = 0xA02834,
.ien_int_1 = 0xA02838,
.ien_int_0 = 0xA0283c,
.int_level_3_3 = 0xA02880,
.int_level_3_2 = 0xA02884,
.int_level_3_1 = 0xA02888,
.int_level_3_0 = 0xA0288c,
.int_level_2_3 = 0xA02890,
.int_level_2_2 = 0xA02894,
.int_level_2_1 = 0xA02898,
.int_level_2_0 = 0xA0289c,
.int_level_1_3 = 0xA028a0,
.int_level_1_2 = 0xA028a4,
.int_level_1_1 = 0xA028a8,
.int_level_1_0 = 0xA028ac,
.int_level_0_3 = 0xA028b0,
.int_level_0_2 = 0xA028b4,
.int_level_0_1 = 0xA028b8,
.int_level_0_0 = 0xA028bc,
.int_docsis_en = 0xA028F4,
.mips_pll_setup = 0x980000,
.usb_fs = 0x980030, /* -default 72800028- */
.test_bus = 0x9800CC,
.crt_spare = 0x9800d4,
.usb2_ohci_int_mask = 0x9A000c,
.usb2_strap = 0x9A0014,
.ehci_hcapbase = 0x9BFE00,
.ohci_hc_revision = 0x9BFC00,
.bcm1_bs_lmi_steer = 0x9E0004,
.usb2_control = 0x9E0054,
.usb2_stbus_obc = 0x9BFF00,
.usb2_stbus_mess_size = 0x9BFF04,
.usb2_stbus_chunk_size = 0x9BFF08,
.pcie_regs = 0x000000, /* -doesn't exist- */
.tim_ch = 0xA02C10,
.tim_cl = 0xA02C14,
.gpio_dout = 0xA02c20,
.gpio_din = 0xA02c24,
.gpio_dir = 0xA02c2C,
.watchdog = 0xA02c30,
.front_panel = 0x000000, /* -not used- */
};

View file

@ -0,0 +1,98 @@
/*
* Locations of devices in the Cronus ASIC
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*/
#include <asm/mach-powertv/asic.h>
const struct register_map cronus_register_map = {
.eic_slow0_strt_add = 0x000000,
.eic_cfg_bits = 0x000038,
.eic_ready_status = 0x00004C,
.chipver3 = 0x2A0800,
.chipver2 = 0x2A0804,
.chipver1 = 0x2A0808,
.chipver0 = 0x2A080C,
/* The registers of IRBlaster */
.uart1_intstat = 0x2A1800,
.uart1_inten = 0x2A1804,
.uart1_config1 = 0x2A1808,
.uart1_config2 = 0x2A180C,
.uart1_divisorhi = 0x2A1810,
.uart1_divisorlo = 0x2A1814,
.uart1_data = 0x2A1818,
.uart1_status = 0x2A181C,
.int_stat_3 = 0x2A2800,
.int_stat_2 = 0x2A2804,
.int_stat_1 = 0x2A2808,
.int_stat_0 = 0x2A280C,
.int_config = 0x2A2810,
.int_int_scan = 0x2A2818,
.ien_int_3 = 0x2A2830,
.ien_int_2 = 0x2A2834,
.ien_int_1 = 0x2A2838,
.ien_int_0 = 0x2A283C,
.int_level_3_3 = 0x2A2880,
.int_level_3_2 = 0x2A2884,
.int_level_3_1 = 0x2A2888,
.int_level_3_0 = 0x2A288C,
.int_level_2_3 = 0x2A2890,
.int_level_2_2 = 0x2A2894,
.int_level_2_1 = 0x2A2898,
.int_level_2_0 = 0x2A289C,
.int_level_1_3 = 0x2A28A0,
.int_level_1_2 = 0x2A28A4,
.int_level_1_1 = 0x2A28A8,
.int_level_1_0 = 0x2A28AC,
.int_level_0_3 = 0x2A28B0,
.int_level_0_2 = 0x2A28B4,
.int_level_0_1 = 0x2A28B8,
.int_level_0_0 = 0x2A28BC,
.int_docsis_en = 0x2A28F4,
.mips_pll_setup = 0x1C0000,
.usb_fs = 0x1C0018,
.test_bus = 0x1C00CC,
.crt_spare = 0x1c00d4,
.usb2_ohci_int_mask = 0x20000C,
.usb2_strap = 0x200014,
.ehci_hcapbase = 0x21FE00,
.ohci_hc_revision = 0x1E0000,
.bcm1_bs_lmi_steer = 0x2E0008,
.usb2_control = 0x2E004C,
.usb2_stbus_obc = 0x21FF00,
.usb2_stbus_mess_size = 0x21FF04,
.usb2_stbus_chunk_size = 0x21FF08,
.pcie_regs = 0x220000,
.tim_ch = 0x2A2C10,
.tim_cl = 0x2A2C14,
.gpio_dout = 0x2A2C20,
.gpio_din = 0x2A2C24,
.gpio_dir = 0x2A2C2C,
.watchdog = 0x2A2C30,
.front_panel = 0x2A3800,
};

View file

@ -0,0 +1,98 @@
/*
* Locations of devices in the Zeus ASIC
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*/
#include <asm/mach-powertv/asic.h>
const struct register_map zeus_register_map = {
.eic_slow0_strt_add = 0x000000,
.eic_cfg_bits = 0x000038,
.eic_ready_status = 0x00004c,
.chipver3 = 0x280800,
.chipver2 = 0x280804,
.chipver1 = 0x280808,
.chipver0 = 0x28080c,
/* The registers of IRBlaster */
.uart1_intstat = 0x281800,
.uart1_inten = 0x281804,
.uart1_config1 = 0x281808,
.uart1_config2 = 0x28180C,
.uart1_divisorhi = 0x281810,
.uart1_divisorlo = 0x281814,
.uart1_data = 0x281818,
.uart1_status = 0x28181C,
.int_stat_3 = 0x282800,
.int_stat_2 = 0x282804,
.int_stat_1 = 0x282808,
.int_stat_0 = 0x28280c,
.int_config = 0x282810,
.int_int_scan = 0x282818,
.ien_int_3 = 0x282830,
.ien_int_2 = 0x282834,
.ien_int_1 = 0x282838,
.ien_int_0 = 0x28283c,
.int_level_3_3 = 0x282880,
.int_level_3_2 = 0x282884,
.int_level_3_1 = 0x282888,
.int_level_3_0 = 0x28288c,
.int_level_2_3 = 0x282890,
.int_level_2_2 = 0x282894,
.int_level_2_1 = 0x282898,
.int_level_2_0 = 0x28289c,
.int_level_1_3 = 0x2828a0,
.int_level_1_2 = 0x2828a4,
.int_level_1_1 = 0x2828a8,
.int_level_1_0 = 0x2828ac,
.int_level_0_3 = 0x2828b0,
.int_level_0_2 = 0x2828b4,
.int_level_0_1 = 0x2828b8,
.int_level_0_0 = 0x2828bc,
.int_docsis_en = 0x2828F4,
.mips_pll_setup = 0x1a0000,
.usb_fs = 0x1a0018,
.test_bus = 0x1a0238,
.crt_spare = 0x1a0090,
.usb2_ohci_int_mask = 0x1e000c,
.usb2_strap = 0x1e0014,
.ehci_hcapbase = 0x1FFE00,
.ohci_hc_revision = 0x1FFC00,
.bcm1_bs_lmi_steer = 0x2C0008,
.usb2_control = 0x2c01a0,
.usb2_stbus_obc = 0x1FFF00,
.usb2_stbus_mess_size = 0x1FFF04,
.usb2_stbus_chunk_size = 0x1FFF08,
.pcie_regs = 0x200000,
.tim_ch = 0x282C10,
.tim_cl = 0x282C14,
.gpio_dout = 0x282c20,
.gpio_din = 0x282c24,
.gpio_dir = 0x282c2C,
.watchdog = 0x282c30,
.front_panel = 0x283800,
};

View file

@ -0,0 +1,787 @@
/*
* ASIC Device List Intialization
*
* Description: Defines the platform resources for the SA settop.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*
* Description: Defines the platform resources for the SA settop.
*
* NOTE: The bootloader allocates persistent memory at an address which is
* 16 MiB below the end of the highest address in KSEG0. All fixed
* address memory reservations must avoid this region.
*/
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/resource.h>
#include <linux/serial_reg.h>
#include <linux/io.h>
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <asm/page.h>
#include <linux/swap.h>
#include <linux/highmem.h>
#include <linux/dma-mapping.h>
#include <asm/mach-powertv/asic.h>
#include <asm/mach-powertv/asic_regs.h>
#include <asm/mach-powertv/interrupts.h>
#ifdef CONFIG_BOOTLOADER_DRIVER
#include <asm/mach-powertv/kbldr.h>
#endif
#include <asm/bootinfo.h>
#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
/*
* Forward Prototypes
*/
static void pmem_setup_resource(void);
/*
* Global Variables
*/
enum asic_type asic;
unsigned int platform_features;
unsigned int platform_family;
const struct register_map *register_map;
EXPORT_SYMBOL(register_map); /* Exported for testing */
unsigned long asic_phy_base;
unsigned long asic_base;
EXPORT_SYMBOL(asic_base); /* Exported for testing */
struct resource *gp_resources;
static bool usb_configured;
/*
* Don't recommend to use it directly, it is usually used by kernel internally.
* Portable code should be using interfaces such as ioremp, dma_map_single, etc.
*/
unsigned long phys_to_bus_offset;
EXPORT_SYMBOL(phys_to_bus_offset);
/*
*
* IO Resource Definition
*
*/
struct resource asic_resource = {
.name = "ASIC Resource",
.start = 0,
.end = ASIC_IO_SIZE,
.flags = IORESOURCE_MEM,
};
/*
*
* USB Host Resource Definition
*
*/
static struct resource ehci_resources[] = {
{
.parent = &asic_resource,
.start = 0,
.end = 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = irq_usbehci,
.end = irq_usbehci,
.flags = IORESOURCE_IRQ,
},
};
static u64 ehci_dmamask = DMA_BIT_MASK(32);
static struct platform_device ehci_device = {
.name = "powertv-ehci",
.id = 0,
.num_resources = 2,
.resource = ehci_resources,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource ohci_resources[] = {
{
.parent = &asic_resource,
.start = 0,
.end = 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = irq_usbohci,
.end = irq_usbohci,
.flags = IORESOURCE_IRQ,
},
};
static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct platform_device ohci_device = {
.name = "powertv-ohci",
.id = 0,
.num_resources = 2,
.resource = ohci_resources,
.dev = {
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct platform_device *platform_devices[] = {
&ehci_device,
&ohci_device,
};
/*
*
* Platform Configuration and Device Initialization
*
*/
static void __init fs_update(int pe, int md, int sdiv, int disable_div_by_3)
{
int en_prg, byp, pwr, nsb, val;
int sout;
sout = 1;
en_prg = 1;
byp = 0;
nsb = 1;
pwr = 1;
val = ((sdiv << 29) | (md << 24) | (pe<<8) | (sout<<3) | (byp<<2) |
(nsb<<1) | (disable_div_by_3<<5));
asic_write(val, usb_fs);
asic_write(val | (en_prg<<4), usb_fs);
asic_write(val | (en_prg<<4) | pwr, usb_fs);
}
/*
* Allow override of bootloader-specified model
*/
static char __initdata cmdline[COMMAND_LINE_SIZE];
#define FORCEFAMILY_PARAM "forcefamily"
static __init int check_forcefamily(unsigned char forced_family[2])
{
const char *p;
forced_family[0] = '\0';
forced_family[1] = '\0';
/* Check the command line for a forcefamily directive */
strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1);
p = strstr(cmdline, FORCEFAMILY_PARAM);
if (p && (p != cmdline) && (*(p - 1) != ' '))
p = strstr(p, " " FORCEFAMILY_PARAM "=");
if (p) {
p += strlen(FORCEFAMILY_PARAM "=");
if (*p == '\0' || *(p + 1) == '\0' ||
(*(p + 2) != '\0' && *(p + 2) != ' '))
pr_err(FORCEFAMILY_PARAM " must be exactly two "
"characters long, ignoring value\n");
else {
forced_family[0] = *p;
forced_family[1] = *(p + 1);
}
}
return 0;
}
/*
* platform_set_family - determine major platform family type.
*
* Returns family type; -1 if none
* Returns the family type; -1 if none
*
*/
static __init noinline void platform_set_family(void)
{
#define BOOTLDRFAMILY(byte1, byte0) (((byte1) << 8) | (byte0))
unsigned char forced_family[2];
unsigned short bootldr_family;
check_forcefamily(forced_family);
if (forced_family[0] != '\0' && forced_family[1] != '\0')
bootldr_family = BOOTLDRFAMILY(forced_family[0],
forced_family[1]);
else {
#ifdef CONFIG_BOOTLOADER_DRIVER
bootldr_family = (unsigned short) kbldr_GetSWFamily();
#else
#if defined(CONFIG_BOOTLOADER_FAMILY)
bootldr_family = (unsigned short) BOOTLDRFAMILY(
CONFIG_BOOTLOADER_FAMILY[0],
CONFIG_BOOTLOADER_FAMILY[1]);
#else
#error "Unknown Bootloader Family"
#endif
#endif
}
pr_info("Bootloader Family = 0x%04X\n", bootldr_family);
switch (bootldr_family) {
case BOOTLDRFAMILY('R', '1'):
platform_family = FAMILY_1500;
break;
case BOOTLDRFAMILY('4', '4'):
platform_family = FAMILY_4500;
break;
case BOOTLDRFAMILY('4', '6'):
platform_family = FAMILY_4600;
break;
case BOOTLDRFAMILY('A', '1'):
platform_family = FAMILY_4600VZA;
break;
case BOOTLDRFAMILY('8', '5'):
platform_family = FAMILY_8500;
break;
case BOOTLDRFAMILY('R', '2'):
platform_family = FAMILY_8500RNG;
break;
case BOOTLDRFAMILY('8', '6'):
platform_family = FAMILY_8600;
break;
case BOOTLDRFAMILY('B', '1'):
platform_family = FAMILY_8600VZB;
break;
case BOOTLDRFAMILY('E', '1'):
platform_family = FAMILY_1500VZE;
break;
case BOOTLDRFAMILY('F', '1'):
platform_family = FAMILY_1500VZF;
break;
default:
platform_family = -1;
}
}
unsigned int platform_get_family(void)
{
return platform_family;
}
EXPORT_SYMBOL(platform_get_family);
/*
* \brief usb_eye_configure() for optimizing the USB eye on Calliope.
*
* \param unsigned int value saved to the register.
*
* \return none
*
*/
static void __init usb_eye_configure(unsigned int value)
{
asic_write(asic_read(crt_spare) | value, crt_spare);
}
/*
* platform_get_asic - determine the ASIC type.
*
* \param none
*
* \return ASIC type; ASIC_UNKNOWN if none
*
*/
enum asic_type platform_get_asic(void)
{
return asic;
}
EXPORT_SYMBOL(platform_get_asic);
/*
* platform_configure_usb - usb configuration based on platform type.
* @bcm1_usb2_ctl: value for the BCM1_USB2_CTL register, which is
* quirky
*/
static void __init platform_configure_usb(void)
{
u32 bcm1_usb2_ctl;
if (usb_configured)
return;
switch (asic) {
case ASIC_ZEUS:
fs_update(0x0000, 0x11, 0x02, 0);
bcm1_usb2_ctl = 0x803;
break;
case ASIC_CRONUS:
case ASIC_CRONUSLITE:
fs_update(0x0000, 0x11, 0x02, 0);
bcm1_usb2_ctl = 0x803;
break;
case ASIC_CALLIOPE:
fs_update(0x0000, 0x11, 0x02, 1);
switch (platform_family) {
case FAMILY_1500VZE:
break;
case FAMILY_1500VZF:
usb_eye_configure(0x003c0000);
break;
default:
usb_eye_configure(0x00300000);
break;
}
bcm1_usb2_ctl = 0x803;
break;
default:
pr_err("Unknown ASIC type: %d\n", asic);
break;
}
/* turn on USB power */
asic_write(0, usb2_strap);
/* Enable all OHCI interrupts */
asic_write(bcm1_usb2_ctl, usb2_control);
/* USB2_STBUS_OBC store32/load32 */
asic_write(3, usb2_stbus_obc);
/* USB2_STBUS_MESS_SIZE 2 packets */
asic_write(1, usb2_stbus_mess_size);
/* USB2_STBUS_CHUNK_SIZE 2 packets */
asic_write(1, usb2_stbus_chunk_size);
usb_configured = true;
}
/*
* Set up the USB EHCI interface
*/
void platform_configure_usb_ehci()
{
platform_configure_usb();
}
/*
* Set up the USB OHCI interface
*/
void platform_configure_usb_ohci()
{
platform_configure_usb();
}
/*
* Shut the USB EHCI interface down--currently a NOP
*/
void platform_unconfigure_usb_ehci()
{
}
/*
* Shut the USB OHCI interface down--currently a NOP
*/
void platform_unconfigure_usb_ohci()
{
}
/**
* configure_platform - configuration based on platform type.
*/
void __init configure_platform(void)
{
platform_set_family();
switch (platform_family) {
case FAMILY_1500:
case FAMILY_1500VZE:
case FAMILY_1500VZF:
platform_features = FFS_CAPABLE;
asic = ASIC_CALLIOPE;
asic_phy_base = CALLIOPE_IO_BASE;
register_map = &calliope_register_map;
asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
ASIC_IO_SIZE);
if (platform_family == FAMILY_1500VZE) {
gp_resources = non_dvr_vze_calliope_resources;
pr_info("Platform: 1500/Vz Class E - "
"CALLIOPE, NON_DVR_CAPABLE\n");
} else if (platform_family == FAMILY_1500VZF) {
gp_resources = non_dvr_vzf_calliope_resources;
pr_info("Platform: 1500/Vz Class F - "
"CALLIOPE, NON_DVR_CAPABLE\n");
} else {
gp_resources = non_dvr_calliope_resources;
pr_info("Platform: 1500/RNG100 - CALLIOPE, "
"NON_DVR_CAPABLE\n");
}
break;
case FAMILY_4500:
platform_features = FFS_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_ZEUS;
asic_phy_base = ZEUS_IO_BASE;
register_map = &zeus_register_map;
asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
ASIC_IO_SIZE);
gp_resources = non_dvr_zeus_resources;
pr_info("Platform: 4500 - ZEUS, NON_DVR_CAPABLE\n");
break;
case FAMILY_4600:
{
unsigned int chipversion = 0;
/* The settop has PCIE but it isn't used, so don't advertise
* it*/
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
asic_phy_base = CRONUS_IO_BASE; /* same as Cronus */
register_map = &cronus_register_map; /* same as Cronus */
asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
ASIC_IO_SIZE);
gp_resources = non_dvr_cronuslite_resources;
/* ASIC version will determine if this is a real CronusLite or
* Castrati(Cronus) */
chipversion = asic_read(chipver3) << 24;
chipversion |= asic_read(chipver2) << 16;
chipversion |= asic_read(chipver1) << 8;
chipversion |= asic_read(chipver0);
if ((chipversion == CRONUS_10) || (chipversion == CRONUS_11))
asic = ASIC_CRONUS;
else
asic = ASIC_CRONUSLITE;
pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
"chipversion=0x%08X\n",
(asic == ASIC_CRONUS) ? "CRONUS" : "CRONUS LITE",
chipversion);
break;
}
case FAMILY_4600VZA:
platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
asic = ASIC_CRONUS;
asic_phy_base = CRONUS_IO_BASE;
register_map = &cronus_register_map;
asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
ASIC_IO_SIZE);
gp_resources = non_dvr_cronus_resources;
pr_info("Platform: Vz Class A - CRONUS, NON_DVR_CAPABLE\n");
break;
case FAMILY_8500:
case FAMILY_8500RNG:
platform_features = DVR_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_ZEUS;
asic_phy_base = ZEUS_IO_BASE;
register_map = &zeus_register_map;
asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
ASIC_IO_SIZE);
gp_resources = dvr_zeus_resources;
pr_info("Platform: 8500/RNG200 - ZEUS, DVR_CAPABLE\n");
break;
case FAMILY_8600:
case FAMILY_8600VZB:
platform_features = DVR_CAPABLE | PCIE_CAPABLE |
DISPLAY_CAPABLE;
asic = ASIC_CRONUS;
asic_phy_base = CRONUS_IO_BASE;
register_map = &cronus_register_map;
asic_base = (unsigned long)ioremap_nocache(asic_phy_base,
ASIC_IO_SIZE);
gp_resources = dvr_cronus_resources;
pr_info("Platform: 8600/Vz Class B - CRONUS, "
"DVR_CAPABLE\n");
break;
default:
pr_crit("Platform: UNKNOWN PLATFORM\n");
break;
}
switch (asic) {
case ASIC_ZEUS:
phys_to_bus_offset = 0x30000000;
break;
case ASIC_CALLIOPE:
phys_to_bus_offset = 0x10000000;
break;
case ASIC_CRONUSLITE:
/* Fall through */
case ASIC_CRONUS:
/*
* TODO: We suppose 0x10000000 aliases into 0x20000000-
* 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
* 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
*/
phys_to_bus_offset = 0x10000000;
break;
default:
phys_to_bus_offset = 0x00000000;
break;
}
}
/**
* platform_devices_init - sets up USB device resourse.
*/
static int __init platform_devices_init(void)
{
pr_notice("%s: ----- Initializing USB resources -----\n", __func__);
asic_resource.start = asic_phy_base;
asic_resource.end += asic_resource.start;
ehci_resources[0].start = asic_reg_phys_addr(ehci_hcapbase);
ehci_resources[0].end += ehci_resources[0].start;
ohci_resources[0].start = asic_reg_phys_addr(ohci_hc_revision);
ohci_resources[0].end += ohci_resources[0].start;
set_io_port_base(0);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
return 0;
}
arch_initcall(platform_devices_init);
/*
*
* BOOTMEM ALLOCATION
*
*/
/*
* Allocates/reserves the Platform memory resources early in the boot process.
* This ignores any resources that are designated IORESOURCE_IO
*/
void __init platform_alloc_bootmem(void)
{
int i;
int total = 0;
/* Get persistent memory data from command line before allocating
* resources. This need to happen before normal command line parsing
* has been done */
pmem_setup_resource();
/* Loop through looking for resources that want a particular address */
for (i = 0; gp_resources[i].flags != 0; i++) {
int size = gp_resources[i].end - gp_resources[i].start + 1;
if ((gp_resources[i].start != 0) &&
((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
reserve_bootmem(bus_to_phys(gp_resources[i].start),
size, 0);
total += gp_resources[i].end -
gp_resources[i].start + 1;
pr_info("reserve resource %s at %08x (%u bytes)\n",
gp_resources[i].name, gp_resources[i].start,
gp_resources[i].end -
gp_resources[i].start + 1);
}
}
/* Loop through assigning addresses for those that are left */
for (i = 0; gp_resources[i].flags != 0; i++) {
int size = gp_resources[i].end - gp_resources[i].start + 1;
if ((gp_resources[i].start == 0) &&
((gp_resources[i].flags & IORESOURCE_MEM) != 0)) {
void *mem = alloc_bootmem_pages(size);
if (mem == NULL)
pr_err("Unable to allocate bootmem pages "
"for %s\n", gp_resources[i].name);
else {
gp_resources[i].start =
phys_to_bus(virt_to_phys(mem));
gp_resources[i].end =
gp_resources[i].start + size - 1;
total += size;
pr_info("allocate resource %s at %08x "
"(%u bytes)\n",
gp_resources[i].name,
gp_resources[i].start, size);
}
}
}
pr_info("Total Platform driver memory allocation: 0x%08x\n", total);
/* indicate resources that are platform I/O related */
for (i = 0; gp_resources[i].flags != 0; i++) {
if ((gp_resources[i].start != 0) &&
((gp_resources[i].flags & IORESOURCE_IO) != 0)) {
pr_info("reserved platform resource %s at %08x\n",
gp_resources[i].name, gp_resources[i].start);
}
}
}
/*
*
* PERSISTENT MEMORY (PMEM) CONFIGURATION
*
*/
static unsigned long pmemaddr __initdata;
static int __init early_param_pmemaddr(char *p)
{
pmemaddr = (unsigned long)simple_strtoul(p, NULL, 0);
return 0;
}
early_param("pmemaddr", early_param_pmemaddr);
static long pmemlen __initdata;
static int __init early_param_pmemlen(char *p)
{
/* TODO: we can use this code when and if the bootloader ever changes this */
#if 0
pmemlen = (unsigned long)simple_strtoul(p, NULL, 0);
#else
pmemlen = 0x20000;
#endif
return 0;
}
early_param("pmemlen", early_param_pmemlen);
/*
* Set up persistent memory. If we were given values, we patch the array of
* resources. Otherwise, persistent memory may be allocated anywhere at all.
*/
static void __init pmem_setup_resource(void)
{
struct resource *resource;
resource = asic_resource_get("DiagPersistentMemory");
if (resource && pmemaddr && pmemlen) {
/* The address provided by bootloader is in kseg0. Convert to
* a bus address. */
resource->start = phys_to_bus(pmemaddr - 0x80000000);
resource->end = resource->start + pmemlen - 1;
pr_info("persistent memory: start=0x%x end=0x%x\n",
resource->start, resource->end);
}
}
/*
*
* RESOURCE ACCESS FUNCTIONS
*
*/
/**
* asic_resource_get - retrieves parameters for a platform resource.
* @name: string to match resource
*
* Returns a pointer to a struct resource corresponding to the given name.
*
* CANNOT BE NAMED platform_resource_get, which would be the obvious choice,
* as this function name is already declared
*/
struct resource *asic_resource_get(const char *name)
{
int i;
for (i = 0; gp_resources[i].flags != 0; i++) {
if (strcmp(gp_resources[i].name, name) == 0)
return &gp_resources[i];
}
return NULL;
}
EXPORT_SYMBOL(asic_resource_get);
/**
* platform_release_memory - release pre-allocated memory
* @ptr: pointer to memory to release
* @size: size of resource
*
* This must only be called for memory allocated or reserved via the boot
* memory allocator.
*/
void platform_release_memory(void *ptr, int size)
{
unsigned long addr;
unsigned long end;
addr = ((unsigned long)ptr + (PAGE_SIZE - 1)) & PAGE_MASK;
end = ((unsigned long)ptr + size) & PAGE_MASK;
for (; addr < end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(__va(addr)));
init_page_count(virt_to_page(__va(addr)));
free_page((unsigned long)__va(addr));
}
}
EXPORT_SYMBOL(platform_release_memory);
/*
*
* FEATURE AVAILABILITY FUNCTIONS
*
*/
int platform_supports_dvr(void)
{
return (platform_features & DVR_CAPABLE) != 0;
}
int platform_supports_ffs(void)
{
return (platform_features & FFS_CAPABLE) != 0;
}
int platform_supports_pcie(void)
{
return (platform_features & PCIE_CAPABLE) != 0;
}
int platform_supports_display(void)
{
return (platform_features & DISPLAY_CAPABLE) != 0;
}

View file

@ -0,0 +1,125 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
* Copyright (C) 2001 Ralf Baechle
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Routines for generic manipulation of the interrupts found on the PowerTV
* platform.
*
* The interrupt controller is located in the South Bridge a PIIX4 device
* with two internal 82C95 interrupt controllers.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/kernel.h>
#include <linux/random.h>
#include <asm/irq_cpu.h>
#include <linux/io.h>
#include <asm/irq_regs.h>
#include <asm/mips-boards/generic.h>
#include <asm/mach-powertv/asic_regs.h>
static DEFINE_SPINLOCK(asic_irq_lock);
static inline int get_int(void)
{
unsigned long flags;
int irq;
spin_lock_irqsave(&asic_irq_lock, flags);
irq = (asic_read(int_int_scan) >> 4) - 1;
if (irq == 0 || irq >= NR_IRQS)
irq = -1;
spin_unlock_irqrestore(&asic_irq_lock, flags);
return irq;
}
static void asic_irqdispatch(void)
{
int irq;
irq = get_int();
if (irq < 0)
return; /* interrupt has already been cleared */
do_IRQ(irq);
}
static inline int clz(unsigned long x)
{
__asm__(
" .set push \n"
" .set mips32 \n"
" clz %0, %1 \n"
" .set pop \n"
: "=r" (x)
: "r" (x));
return x;
}
/*
* Version of ffs that only looks at bits 12..15.
*/
static inline unsigned int irq_ffs(unsigned int pending)
{
return fls(pending) - 1 + CAUSEB_IP;
}
/*
* TODO: check how it works under EIC mode.
*/
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
int irq;
irq = irq_ffs(pending);
if (irq == CAUSEF_IP3)
asic_irqdispatch();
else if (irq >= 0)
do_IRQ(irq);
else
spurious_interrupt();
}
void __init arch_init_irq(void)
{
int i;
asic_irq_init();
/*
* Initialize interrupt exception vectors.
*/
if (cpu_has_veic || cpu_has_vint) {
int nvec = cpu_has_veic ? 64 : 8;
for (i = 0; i < nvec; i++)
set_vi_handler(i, asic_irqdispatch);
}
}

View file

@ -0,0 +1,116 @@
/*
* Portions copyright (C) 2005-2009 Scientific Atlanta
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* Modified from arch/mips/kernel/irq-rm7000.c:
* Copyright (C) 2003 Ralf Baechle
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/mach-powertv/asic_regs.h>
static inline void unmask_asic_irq(unsigned int irq)
{
unsigned long enable_bit;
enable_bit = (1 << (irq & 0x1f));
switch (irq >> 5) {
case 0:
asic_write(asic_read(ien_int_0) | enable_bit, ien_int_0);
break;
case 1:
asic_write(asic_read(ien_int_1) | enable_bit, ien_int_1);
break;
case 2:
asic_write(asic_read(ien_int_2) | enable_bit, ien_int_2);
break;
case 3:
asic_write(asic_read(ien_int_3) | enable_bit, ien_int_3);
break;
default:
BUG();
}
}
static inline void mask_asic_irq(unsigned int irq)
{
unsigned long disable_mask;
disable_mask = ~(1 << (irq & 0x1f));
switch (irq >> 5) {
case 0:
asic_write(asic_read(ien_int_0) & disable_mask, ien_int_0);
break;
case 1:
asic_write(asic_read(ien_int_1) & disable_mask, ien_int_1);
break;
case 2:
asic_write(asic_read(ien_int_2) & disable_mask, ien_int_2);
break;
case 3:
asic_write(asic_read(ien_int_3) & disable_mask, ien_int_3);
break;
default:
BUG();
}
}
static struct irq_chip asic_irq_chip = {
.name = "ASIC Level",
.ack = mask_asic_irq,
.mask = mask_asic_irq,
.mask_ack = mask_asic_irq,
.unmask = unmask_asic_irq,
.eoi = unmask_asic_irq,
};
void __init asic_irq_init(void)
{
int i;
/* set priority to 0 */
write_c0_status(read_c0_status() & ~(0x0000fc00));
asic_write(0, ien_int_0);
asic_write(0, ien_int_1);
asic_write(0, ien_int_2);
asic_write(0, ien_int_3);
asic_write(0x0fffffff, int_level_3_3);
asic_write(0xffffffff, int_level_3_2);
asic_write(0xffffffff, int_level_3_1);
asic_write(0xffffffff, int_level_3_0);
asic_write(0xffffffff, int_level_2_3);
asic_write(0xffffffff, int_level_2_2);
asic_write(0xffffffff, int_level_2_1);
asic_write(0xffffffff, int_level_2_0);
asic_write(0xffffffff, int_level_1_3);
asic_write(0xffffffff, int_level_1_2);
asic_write(0xffffffff, int_level_1_1);
asic_write(0xffffffff, int_level_1_0);
asic_write(0xffffffff, int_level_0_3);
asic_write(0xffffffff, int_level_0_2);
asic_write(0xffffffff, int_level_0_1);
asic_write(0xffffffff, int_level_0_0);
asic_write(0xf, int_int_scan);
/*
* Initialize interrupt handlers.
*/
for (i = 0; i < NR_IRQS; i++)
set_irq_chip_and_handler(i, &asic_irq_chip, handle_level_irq);
}

View file

@ -0,0 +1,620 @@
/*
* Memory pre-allocations for Calliope boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
/*
* NON_DVR_CAPABLE CALLIOPE RESOURCES
*/
struct resource non_dvr_calliope_resources[] __initdata =
{
/*
* VIDEO / LX1
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x24000000,
.end = 0x24200000 - 1, /*2MiB */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /*8KiB block ST231a monitor */
.start = 0x24200000,
.end = 0x24202000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x24202000,
.end = 0x26700000 - 1, /*~36.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_MEM,
},
/*
* Sysaudio Driver
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
* STAVEM driver/STAPI
*/
{
.name = "AVMEMPartition0",
.start = 0x00000000,
.end = 0x00600000 - 1, /* 6 MB total */
.flags = IORESOURCE_MEM,
},
/*
* DOCSIS Subsystem
*/
{
.name = "Docsis",
.start = 0x22000000,
.end = 0x22700000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* GHW HAL Driver
*/
{
.name = "GraphicsHeap",
.start = 0x22700000,
.end = 0x23500000 - 1, /* 14 MB total */
.flags = IORESOURCE_MEM,
},
/*
* multi com buffer area
*/
{
.name = "MulticomSHM",
.start = 0x23700000,
.end = 0x23720000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* DMA Ring buffer (don't need recording buffers)
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x000AA000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Display bins buffer for unit0
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* AVFS: player HAL memory
*
*
*/
{
.name = "AvfsDmaMem",
.start = 0x00000000,
.end = 0x002c4c00 - 1, /* 945K * 3 for playback */
.flags = IORESOURCE_MEM,
},
/*
* PMEM
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Smartcard
*/
{
.name = "SmartCardInfo",
.start = 0x00000000,
.end = 0x2800 - 1,
.flags = IORESOURCE_MEM,
},
/*
* NAND Flash
*/
{
.name = "NandFlash",
.start = NAND_FLASH_BASE,
.end = NAND_FLASH_BASE + 0x400 - 1,
.flags = IORESOURCE_IO,
},
/*
* Synopsys GMAC Memory Region
*/
{
.name = "GMAC",
.start = 0x00000000,
.end = 0x00010000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Add other resources here
*
*/
{ },
};
struct resource non_dvr_vz_calliope_resources[] __initdata =
{
/*
* VIDEO / LX1
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x24000000,
.end = 0x24200000 - 1, /*2 Meg */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /* 8k block ST231a monitor */
.start = 0x24200000,
.end = 0x24202000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x22202000,
.end = 0x22C20B85 - 1, /* 10.12 Meg */
.flags = IORESOURCE_MEM,
},
/*
* Sysaudio Driver
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
* STAVEM driver/STAPI
*/
{
.name = "AVMEMPartition0",
.start = 0x20300000,
.end = 0x20620000-1, /*3.125 MB total */
.flags = IORESOURCE_MEM,
},
/*
* GHW HAL Driver
*/
{
.name = "GraphicsHeap",
.start = 0x20100000,
.end = 0x20300000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* multi com buffer area
*/
{
.name = "MulticomSHM",
.start = 0x23900000,
.end = 0x23920000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* DMA Ring buffer
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x000AA000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Display bins buffer for unit0
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF,
.flags = IORESOURCE_MEM,
},
/*
* PMEM
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Smartcard
*/
{
.name = "SmartCardInfo",
.start = 0x00000000,
.end = 0x2800 - 1,
.flags = IORESOURCE_MEM,
},
/*
* NAND Flash
*/
{
.name = "NandFlash",
.start = NAND_FLASH_BASE,
.end = NAND_FLASH_BASE+0x400 - 1,
.flags = IORESOURCE_IO,
},
/*
* Synopsys GMAC Memory Region
*/
{
.name = "GMAC",
.start = 0x00000000,
.end = 0x00010000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Add other resources here
*/
{ },
};
struct resource non_dvr_vze_calliope_resources[] __initdata =
{
/*
* VIDEO / LX1
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x22000000,
.end = 0x22200000 - 1, /*2 Meg */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /* 8k block ST231a monitor */
.start = 0x22200000,
.end = 0x22202000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x22202000,
.end = 0x22C20B85 - 1, /* 10.12 Meg */
.flags = IORESOURCE_MEM,
},
/*
* Sysaudio Driver
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
* STAVEM driver/STAPI
*/
{
.name = "AVMEMPartition0",
.start = 0x20396000,
.end = 0x206B6000 - 1, /* 3.125 MB total */
.flags = IORESOURCE_MEM,
},
/*
* GHW HAL Driver
*/
{
.name = "GraphicsHeap",
.start = 0x20100000,
.end = 0x20396000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* multi com buffer area
*/
{
.name = "MulticomSHM",
.start = 0x206B6000,
.end = 0x206D6000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* DMA Ring buffer
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x000AA000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Display bins buffer for unit0
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF,
.flags = IORESOURCE_MEM,
},
/*
* PMEM
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Smartcard
*/
{
.name = "SmartCardInfo",
.start = 0x00000000,
.end = 0x2800 - 1,
.flags = IORESOURCE_MEM,
},
/*
* NAND Flash
*/
{
.name = "NandFlash",
.start = NAND_FLASH_BASE,
.end = NAND_FLASH_BASE+0x400 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Synopsys GMAC Memory Region
*/
{
.name = "GMAC",
.start = 0x00000000,
.end = 0x00010000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Add other resources here
*/
{ },
};
struct resource non_dvr_vzf_calliope_resources[] __initdata =
{
/*
* VIDEO / LX1
*/
{
.name = "ST231aImage", /*Delta-Mu 1 image and ram */
.start = 0x24000000,
.end = 0x24200000 - 1, /*2MiB */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /*8KiB block ST231a monitor */
.start = 0x24200000,
.end = 0x24202000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x24202000,
/* ~19.4 (21.5MiB - (2MiB + 8KiB)) */
.end = 0x25580000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Sysaudio Driver
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
* STAVEM driver/STAPI
*/
{
.name = "AVMEMPartition0",
.start = 0x00000000,
.end = 0x00480000 - 1, /* 4.5 MB total */
.flags = IORESOURCE_MEM,
},
/*
* GHW HAL Driver
*/
{
.name = "GraphicsHeap",
.start = 0x22700000,
.end = 0x23500000 - 1, /* 14 MB total */
.flags = IORESOURCE_MEM,
},
/*
* multi com buffer area
*/
{
.name = "MulticomSHM",
.start = 0x23700000,
.end = 0x23720000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* DMA Ring buffer (don't need recording buffers)
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x000AA000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Display bins buffer for unit0
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
* Display bins buffer for unit1
*/
{
.name = "DisplayBins1",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* AVFS: player HAL memory
*
*
*/
{
.name = "AvfsDmaMem",
.start = 0x00000000,
.end = 0x002c4c00 - 1, /* 945K * 3 for playback */
.flags = IORESOURCE_MEM,
},
/*
* PMEM
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Smartcard
*/
{
.name = "SmartCardInfo",
.start = 0x00000000,
.end = 0x2800 - 1,
.flags = IORESOURCE_MEM,
},
/*
* NAND Flash
*/
{
.name = "NandFlash",
.start = NAND_FLASH_BASE,
.end = NAND_FLASH_BASE + 0x400 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Synopsys GMAC Memory Region
*/
{
.name = "GMAC",
.start = 0x00000000,
.end = 0x00010000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Add other resources here
*/
{ },
};

View file

@ -0,0 +1,608 @@
/*
* Memory pre-allocations for Cronus boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
/*
* DVR_CAPABLE CRONUS RESOURCES
*/
struct resource dvr_cronus_resources[] __initdata =
{
/*
*
* VIDEO1 / LX1
*
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x24000000,
.end = 0x241FFFFF, /* 2MiB */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /* 8KiB block ST231a monitor */
.start = 0x24200000,
.end = 0x24201FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x24202000,
.end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_MEM,
},
/*
*
* VIDEO2 / LX2
*
*/
{
.name = "ST231bImage", /* Delta-Mu 2 image and ram */
.start = 0x60000000,
.end = 0x601FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231bMonitor", /* 8KiB block ST231b monitor */
.start = 0x60200000,
.end = 0x60201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory2",
.start = 0x60202000,
.end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
*
* Sysaudio Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* DSP_Image_Buff - DSP code and data images (1MB)
* ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
* ADSC_AUX_Buff - ADSC AUX buffer (16KB)
* ADSC_Main_Buff - ADSC Main buffer (16KB)
*
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
*
* STAVEM driver/STAPI
*
* This driver requires:
*
* Arbitrary Based Buffers:
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*
*/
{
.name = "AVMEMPartition0",
.start = 0x63580000,
.end = 0x64180000 - 1, /* 12 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* DOCSIS Subsystem
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "Docsis",
.start = 0x62000000,
.end = 0x62700000 - 1, /* 7 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* GHW HAL Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* GraphicsHeap - PowerTV Graphics Heap
*
*/
{
.name = "GraphicsHeap",
.start = 0x62700000,
.end = 0x63500000 - 1, /* 14 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* multi com buffer area
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "MulticomSHM",
.start = 0x26000000,
.end = 0x26020000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* DMA Ring buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x00280000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer for unit0
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit0
*
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit1
*
*/
{
.name = "DisplayBins1",
.start = 0x64AD4000,
.end = 0x64AD5000 - 1, /* 4 KB total */
.flags = IORESOURCE_IO,
},
/*
*
* ITFS
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "ITFS",
.start = 0x64180000,
/* 815,104 bytes each for 2 ITFS partitions. */
.end = 0x6430DFFF,
.flags = IORESOURCE_IO,
},
/*
*
* AVFS
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "AvfsDmaMem",
.start = 0x6430E000,
/* (945K * 8) = (128K *3) 5 playbacks / 3 server */
.end = 0x64AD0000 - 1,
.flags = IORESOURCE_IO,
},
{
.name = "AvfsFileSys",
.start = 0x64AD0000,
.end = 0x64AD1000 - 1, /* 4K */
.flags = IORESOURCE_IO,
},
/*
*
* PMEM
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Persistent memory for diagnostics.
*
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Smartcard
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Read and write buffers for Internal/External cards
*
*/
{
.name = "SmartCardInfo",
.start = 0x64AD1000,
.end = 0x64AD3800 - 1,
.flags = IORESOURCE_IO,
},
/*
*
* KAVNET
* NP Reset Vector - must be of the form xxCxxxxx
* NP Image - must be video bank 1
* NP IPC - must be video bank 2
*/
{
.name = "NP_Reset_Vector",
.start = 0x27c00000,
.end = 0x27c01000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_Image",
.start = 0x27020000,
.end = 0x27060000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_IPC",
.start = 0x63500000,
.end = 0x63580000 - 1,
.flags = IORESOURCE_IO,
},
/*
* Add other resources here
*/
{ },
};
/*
* NON_DVR_CAPABLE CRONUS RESOURCES
*/
struct resource non_dvr_cronus_resources[] __initdata =
{
/*
*
* VIDEO1 / LX1
*
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x24000000,
.end = 0x241FFFFF, /* 2MiB */
.flags = IORESOURCE_MEM,
},
{
.name = "ST231aMonitor", /* 8KiB block ST231a monitor */
.start = 0x24200000,
.end = 0x24201FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "MediaMemory1",
.start = 0x24202000,
.end = 0x25FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_MEM,
},
/*
*
* VIDEO2 / LX2
*
*/
{
.name = "ST231bImage", /* Delta-Mu 2 image and ram */
.start = 0x60000000,
.end = 0x601FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231bMonitor", /* 8KiB block ST231b monitor */
.start = 0x60200000,
.end = 0x60201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory2",
.start = 0x60202000,
.end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
*
* Sysaudio Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* DSP_Image_Buff - DSP code and data images (1MB)
* ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
* ADSC_AUX_Buff - ADSC AUX buffer (16KB)
* ADSC_Main_Buff - ADSC Main buffer (16KB)
*
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
*
* STAVEM driver/STAPI
*
* This driver requires:
*
* Arbitrary Based Buffers:
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*
*/
{
.name = "AVMEMPartition0",
.start = 0x63580000,
.end = 0x64180000 - 1, /* 12 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* DOCSIS Subsystem
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "Docsis",
.start = 0x62000000,
.end = 0x62700000 - 1, /* 7 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* GHW HAL Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* GraphicsHeap - PowerTV Graphics Heap
*
*/
{
.name = "GraphicsHeap",
.start = 0x62700000,
.end = 0x63500000 - 1, /* 14 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* multi com buffer area
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "MulticomSHM",
.start = 0x26000000,
.end = 0x26020000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* DMA Ring buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x000AA000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer for unit0
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit0
*
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit1
*
*/
{
.name = "DisplayBins1",
.start = 0x64AD4000,
.end = 0x64AD5000 - 1, /* 4 KB total */
.flags = IORESOURCE_IO,
},
/*
*
* AVFS: player HAL memory
*
*
*/
{
.name = "AvfsDmaMem",
.start = 0x6430E000,
.end = 0x645D2C00 - 1, /* 945K * 3 for playback */
.flags = IORESOURCE_IO,
},
/*
*
* PMEM
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Persistent memory for diagnostics.
*
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Smartcard
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Read and write buffers for Internal/External cards
*
*/
{
.name = "SmartCardInfo",
.start = 0x64AD1000,
.end = 0x64AD3800 - 1,
.flags = IORESOURCE_IO,
},
/*
*
* KAVNET
* NP Reset Vector - must be of the form xxCxxxxx
* NP Image - must be video bank 1
* NP IPC - must be video bank 2
*/
{
.name = "NP_Reset_Vector",
.start = 0x27c00000,
.end = 0x27c01000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_Image",
.start = 0x27020000,
.end = 0x27060000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_IPC",
.start = 0x63500000,
.end = 0x63580000 - 1,
.flags = IORESOURCE_IO,
},
{ },
};

View file

@ -0,0 +1,290 @@
/*
* Memory pre-allocations for Cronus Lite boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
/*
* NON_DVR_CAPABLE CRONUSLITE RESOURCES
*/
struct resource non_dvr_cronuslite_resources[] __initdata =
{
/*
*
* VIDEO2 / LX2
*
*/
{
.name = "ST231aImage", /* Delta-Mu 2 image and ram */
.start = 0x60000000,
.end = 0x601FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231aMonitor", /* 8KiB block ST231b monitor */
.start = 0x60200000,
.end = 0x60201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory1",
.start = 0x60202000,
.end = 0x61FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
*
* Sysaudio Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* DSP_Image_Buff - DSP code and data images (1MB)
* ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
* ADSC_AUX_Buff - ADSC AUX buffer (16KB)
* ADSC_Main_Buff - ADSC Main buffer (16KB)
*
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
*
* STAVEM driver/STAPI
*
* This driver requires:
*
* Arbitrary Based Buffers:
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*
*/
{
.name = "AVMEMPartition0",
.start = 0x63580000,
.end = 0x63B80000 - 1, /* 6 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* DOCSIS Subsystem
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "Docsis",
.start = 0x62000000,
.end = 0x62700000 - 1, /* 7 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* GHW HAL Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* GraphicsHeap - PowerTV Graphics Heap
*
*/
{
.name = "GraphicsHeap",
.start = 0x62700000,
.end = 0x63500000 - 1, /* 14 MB total */
.flags = IORESOURCE_IO,
},
/*
*
* multi com buffer area
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "MulticomSHM",
.start = 0x26000000,
.end = 0x26020000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* DMA Ring buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x000AA000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer for unit0
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit0
*
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit1
*
*/
{
.name = "DisplayBins1",
.start = 0x63B83000,
.end = 0x63B84000 - 1, /* 4 KB total */
.flags = IORESOURCE_IO,
},
/*
*
* AVFS: player HAL memory
*
*
*/
{
.name = "AvfsDmaMem",
.start = 0x63B84000,
.end = 0x63E48C00 - 1, /* 945K * 3 for playback */
.flags = IORESOURCE_IO,
},
/*
*
* PMEM
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Persistent memory for diagnostics.
*
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Smartcard
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Read and write buffers for Internal/External cards
*
*/
{
.name = "SmartCardInfo",
.start = 0x63B80000,
.end = 0x63B82800 - 1,
.flags = IORESOURCE_IO,
},
/*
*
* KAVNET
* NP Reset Vector - must be of the form xxCxxxxx
* NP Image - must be video bank 1
* NP IPC - must be video bank 2
*/
{
.name = "NP_Reset_Vector",
.start = 0x27c00000,
.end = 0x27c01000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_Image",
.start = 0x27020000,
.end = 0x27060000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "NP_IPC",
.start = 0x63500000,
.end = 0x63580000 - 1,
.flags = IORESOURCE_IO,
},
/*
* NAND Flash
*/
{
.name = "NandFlash",
.start = NAND_FLASH_BASE,
.end = NAND_FLASH_BASE + 0x400 - 1,
.flags = IORESOURCE_IO,
},
/*
* Add other resources here
*/
{ },
};

View file

@ -0,0 +1,459 @@
/*
* Memory pre-allocations for Zeus boxes.
*
* Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: Ken Eppinett
* David Schleef <ds@schleef.org>
*/
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
/*
* DVR_CAPABLE RESOURCES
*/
struct resource dvr_zeus_resources[] __initdata =
{
/*
*
* VIDEO1 / LX1
*
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x20000000,
.end = 0x201FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231aMonitor", /* 8KiB block ST231a monitor */
.start = 0x20200000,
.end = 0x20201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory1",
.start = 0x20202000,
.end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
*
* VIDEO2 / LX2
*
*/
{
.name = "ST231bImage", /* Delta-Mu 2 image and ram */
.start = 0x30000000,
.end = 0x301FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231bMonitor", /* 8KiB block ST231b monitor */
.start = 0x30200000,
.end = 0x30201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory2",
.start = 0x30202000,
.end = 0x31FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
*
* Sysaudio Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* DSP_Image_Buff - DSP code and data images (1MB)
* ADSC_CPU_PCM_Buff - ADSC CPU PCM buffer (40KB)
* ADSC_AUX_Buff - ADSC AUX buffer (16KB)
* ADSC_Main_Buff - ADSC Main buffer (16KB)
*
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
*
* STAVEM driver/STAPI
*
* This driver requires:
*
* Arbitrary Based Buffers:
* This memory area is used for allocating buffers for Video decoding
* purposes. Allocation/De-allocation within this buffer is managed
* by the STAVMEM driver of the STAPI. They could be Decimated
* Picture Buffers, Intermediate Buffers, as deemed necessary for
* video decoding purposes, for any video decoders on Zeus.
*
*/
{
.name = "AVMEMPartition0",
.start = 0x00000000,
.end = 0x00c00000 - 1, /* 12 MB total */
.flags = IORESOURCE_MEM,
},
/*
*
* DOCSIS Subsystem
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "Docsis",
.start = 0x40100000,
.end = 0x407fffff,
.flags = IORESOURCE_MEM,
},
/*
*
* GHW HAL Driver
*
* This driver requires:
*
* Arbitrary Based Buffers:
* GraphicsHeap - PowerTV Graphics Heap
*
*/
{
.name = "GraphicsHeap",
.start = 0x46900000,
.end = 0x47700000 - 1, /* 14 MB total */
.flags = IORESOURCE_MEM,
},
/*
*
* multi com buffer area
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "MulticomSHM",
.start = 0x47900000,
.end = 0x47920000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* DMA Ring buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x00280000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer for unit0
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit0
*
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* Display bins buffer
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Display Bins for unit1
*
*/
{
.name = "DisplayBins1",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* ITFS
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "ITFS",
.start = 0x00000000,
/* 815,104 bytes each for 2 ITFS partitions. */
.end = 0x0018DFFF,
.flags = IORESOURCE_MEM,
},
/*
*
* AVFS
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Docsis -
*
*/
{
.name = "AvfsDmaMem",
.start = 0x00000000,
/* (945K * 8) = (128K * 3) 5 playbacks / 3 server */
.end = 0x007c2000 - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "AvfsFileSys",
.start = 0x00000000,
.end = 0x00001000 - 1, /* 4K */
.flags = IORESOURCE_MEM,
},
/*
*
* PMEM
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Persistent memory for diagnostics.
*
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
*
* Smartcard
*
* This driver requires:
*
* Arbitrary Based Buffers:
* Read and write buffers for Internal/External cards
*
*/
{
.name = "SmartCardInfo",
.start = 0x00000000,
.end = 0x2800 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Add other resources here
*/
{ },
};
/*
* NON_DVR_CAPABLE ZEUS RESOURCES
*/
struct resource non_dvr_zeus_resources[] __initdata =
{
/*
* VIDEO1 / LX1
*/
{
.name = "ST231aImage", /* Delta-Mu 1 image and ram */
.start = 0x20000000,
.end = 0x201FFFFF, /* 2MiB */
.flags = IORESOURCE_IO,
},
{
.name = "ST231aMonitor", /* 8KiB block ST231a monitor */
.start = 0x20200000,
.end = 0x20201FFF,
.flags = IORESOURCE_IO,
},
{
.name = "MediaMemory1",
.start = 0x20202000,
.end = 0x21FFFFFF, /*~29.9MiB (32MiB - (2MiB + 8KiB)) */
.flags = IORESOURCE_IO,
},
/*
* Sysaudio Driver
*/
{
.name = "DSP_Image_Buff",
.start = 0x00000000,
.end = 0x000FFFFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_CPU_PCM_Buff",
.start = 0x00000000,
.end = 0x00009FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_AUX_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
{
.name = "ADSC_Main_Buff",
.start = 0x00000000,
.end = 0x00003FFF,
.flags = IORESOURCE_MEM,
},
/*
* STAVEM driver/STAPI
*/
{
.name = "AVMEMPartition0",
.start = 0x00000000,
.end = 0x00600000 - 1, /* 6 MB total */
.flags = IORESOURCE_MEM,
},
/*
* DOCSIS Subsystem
*/
{
.name = "Docsis",
.start = 0x40100000,
.end = 0x407fffff,
.flags = IORESOURCE_MEM,
},
/*
* GHW HAL Driver
*/
{
.name = "GraphicsHeap",
.start = 0x46900000,
.end = 0x47700000 - 1, /* 14 MB total */
.flags = IORESOURCE_MEM,
},
/*
* multi com buffer area
*/
{
.name = "MulticomSHM",
.start = 0x47900000,
.end = 0x47920000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* DMA Ring buffer
*/
{
.name = "BMM_Buffer",
.start = 0x00000000,
.end = 0x00280000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Display bins buffer for unit0
*/
{
.name = "DisplayBins0",
.start = 0x00000000,
.end = 0x00000FFF, /* 4 KB total */
.flags = IORESOURCE_MEM,
},
/*
*
* AVFS: player HAL memory
*
*
*/
{
.name = "AvfsDmaMem",
.start = 0x00000000,
.end = 0x002c4c00 - 1, /* 945K * 3 for playback */
.flags = IORESOURCE_MEM,
},
/*
* PMEM
*/
{
.name = "DiagPersistentMemory",
.start = 0x00000000,
.end = 0x10000 - 1,
.flags = IORESOURCE_MEM,
},
/*
* Smartcard
*/
{
.name = "SmartCardInfo",
.start = 0x00000000,
.end = 0x2800 - 1,
.flags = IORESOURCE_MEM,
},
/*
* NAND Flash
*/
{
.name = "NandFlash",
.start = NAND_FLASH_BASE,
.end = NAND_FLASH_BASE + 0x400 - 1,
.flags = IORESOURCE_IO,
},
/*
* Add other resources here
*/
{ },
};

View file

@ -0,0 +1,52 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Kernel command line creation using the prom monitor (YAMON) argc/argv.
*/
#include <linux/init.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
#include "init.h"
/*
* YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
* This macro take care of sign extension.
*/
#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
char * __init prom_getcmdline(void)
{
return &(arcs_cmdline[0]);
}
void __init prom_init_cmdline(void)
{
int len;
if (prom_argc != 1)
return;
len = strlen(arcs_cmdline);
arcs_cmdline[len] = ' ';
strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
COMMAND_LINE_SIZE - len - 1);
}

128
arch/mips/powertv/init.c Normal file
View file

@ -0,0 +1,128 @@
/*
* Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc.
* All rights reserved.
* Authors: Carsten Langgaard <carstenl@mips.com>
* Maciej W. Rozycki <macro@mips.com>
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* PROM library initialisation code.
*/
#include <linux/init.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <linux/io.h>
#include <asm/system.h>
#include <asm/cacheflush.h>
#include <asm/traps.h>
#include <asm/mips-boards/prom.h>
#include <asm/mips-boards/generic.h>
#include <asm/mach-powertv/asic.h>
#include "init.h"
int prom_argc;
int *_prom_argv, *_prom_envp;
unsigned long _prom_memsize;
/*
* YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
* This macro take care of sign extension, if running in 64-bit mode.
*/
#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
char *prom_getenv(char *envname)
{
char *result = NULL;
if (_prom_envp != NULL) {
/*
* Return a pointer to the given environment variable.
* In 64-bit mode: we're using 64-bit pointers, but all pointers
* in the PROM structures are only 32-bit, so we need some
* workarounds, if we are running in 64-bit mode.
*/
int i, index = 0;
i = strlen(envname);
while (prom_envp(index)) {
if (strncmp(envname, prom_envp(index), i) == 0) {
result = prom_envp(index + 1);
break;
}
index += 2;
}
}
return result;
}
/* TODO: Verify on linux-mips mailing list that the following two */
/* functions are correct */
/* TODO: Copy NMI and EJTAG exception vectors to memory from the */
/* BootROM exception vectors. Flush their cache entries. test it. */
static void __init mips_nmi_setup(void)
{
void *base;
#if defined(CONFIG_CPU_MIPS32_R1)
base = cpu_has_veic ?
(void *)(CAC_BASE + 0xa80) :
(void *)(CAC_BASE + 0x380);
#elif defined(CONFIG_CPU_MIPS32_R2)
base = (void *)0xbfc00000;
#else
#error NMI exception handler address not defined
#endif
}
static void __init mips_ejtag_setup(void)
{
void *base;
#if defined(CONFIG_CPU_MIPS32_R1)
base = cpu_has_veic ?
(void *)(CAC_BASE + 0xa00) :
(void *)(CAC_BASE + 0x300);
#elif defined(CONFIG_CPU_MIPS32_R2)
base = (void *)0xbfc00480;
#else
#error EJTAG exception handler address not defined
#endif
}
void __init prom_init(void)
{
prom_argc = fw_arg0;
_prom_argv = (int *) fw_arg1;
_prom_envp = (int *) fw_arg2;
_prom_memsize = (unsigned long) fw_arg3;
board_nmi_handler_setup = mips_nmi_setup;
board_ejtag_handler_setup = mips_ejtag_setup;
pr_info("\nLINUX started...\n");
prom_init_cmdline();
configure_platform();
prom_meminit();
#ifndef CONFIG_BOOTLOADER_DRIVER
pr_info("\nBootloader driver isn't loaded...\n");
#endif
}

28
arch/mips/powertv/init.h Normal file
View file

@ -0,0 +1,28 @@
/*
* Definitions from powertv init.c file
*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#ifndef _POWERTV_INIT_H
#define _POWERTV_INIT_H
extern int prom_argc;
extern int *_prom_argv;
extern unsigned long _prom_memsize;
#endif

186
arch/mips/powertv/memory.c Normal file
View file

@ -0,0 +1,186 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Apparently originally from arch/mips/malta-memory.c. Modified to work
* with the PowerTV bootloader.
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/pfn.h>
#include <linux/string.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/sections.h>
#include <asm/mips-boards/prom.h>
#include "init.h"
/* Memory constants */
#define KIBIBYTE(n) ((n) * 1024) /* Number of kibibytes */
#define MEBIBYTE(n) ((n) * KIBIBYTE(1024)) /* Number of mebibytes */
#define DEFAULT_MEMSIZE MEBIBYTE(256) /* If no memsize provided */
#define LOW_MEM_MAX MEBIBYTE(252) /* Max usable low mem */
#define RES_BOOTLDR_MEMSIZE MEBIBYTE(1) /* Memory reserved for bldr */
#define BOOT_MEM_SIZE KIBIBYTE(256) /* Memory reserved for bldr */
#define PHYS_MEM_START 0x10000000 /* Start of physical memory */
unsigned long ptv_memsize;
char __initdata cmdline[COMMAND_LINE_SIZE];
void __init prom_meminit(void)
{
char *memsize_str;
unsigned long memsize = 0;
unsigned int physend;
char *ptr;
int low_mem;
int high_mem;
/* Check the command line first for a memsize directive */
strcpy(cmdline, arcs_cmdline);
ptr = strstr(cmdline, "memsize=");
if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
ptr = strstr(ptr, " memsize=");
if (ptr) {
memsize = memparse(ptr + 8, &ptr);
} else {
/* otherwise look in the environment */
memsize_str = prom_getenv("memsize");
if (memsize_str != NULL) {
pr_info("prom memsize = %s\n", memsize_str);
memsize = simple_strtol(memsize_str, NULL, 0);
}
if (memsize == 0) {
if (_prom_memsize != 0) {
memsize = _prom_memsize;
pr_info("_prom_memsize = 0x%lx\n", memsize);
/* add in memory that the bootloader doesn't
* report */
memsize += BOOT_MEM_SIZE;
} else {
memsize = DEFAULT_MEMSIZE;
pr_info("Memsize not passed by bootloader, "
"defaulting to 0x%lx\n", memsize);
}
}
}
/* Store memsize for diagnostic purposes */
ptv_memsize = memsize;
physend = PFN_ALIGN(&_end) - 0x80000000;
if (memsize > LOW_MEM_MAX) {
low_mem = LOW_MEM_MAX;
high_mem = memsize - low_mem;
} else {
low_mem = memsize;
high_mem = 0;
}
/*
* TODO: We will use the hard code for memory configuration until
* the bootloader releases their device tree to us.
*/
/*
* Add the memory reserved for use by the bootloader to the
* memory map.
*/
add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE,
BOOT_MEM_RESERVED);
#ifdef CONFIG_HIGHMEM_256_128
/*
* Add memory in low for general use by the kernel and its friends
* (like drivers, applications, etc).
*/
add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
/*
* Add the memory reserved for reset vector.
*/
add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
/*
* Add the memory reserved.
*/
add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED);
/*
* Add memory in high for general use by the kernel and its friends
* (like drivers, applications, etc).
*
* 75MB is reserved for devices which are using the memory in high.
*/
add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
BOOT_MEM_RAM);
#elif defined CONFIG_HIGHMEM_128_128
/*
* Add memory in low for general use by the kernel and its friends
* (like drivers, applications, etc).
*/
add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
/*
* Add the memory reserved.
*/
add_memory_region(PHYS_MEM_START + MEBIBYTE(128),
MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED);
/*
* Add memory in high for general use by the kernel and its friends
* (like drivers, applications, etc).
*
* 75MB is reserved for devices which are using the memory in high.
*/
add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
BOOT_MEM_RAM);
#else
/* Add low memory regions for either:
* - no-highmemory configuration case -OR-
* - highmemory "HIGHMEM_LOWBANK_ONLY" case
*/
/*
* Add memory for general use by the kernel and its friends
* (like drivers, applications, etc).
*/
add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
/*
* Add the memory reserved for reset vector.
*/
add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
#endif
}
void __init prom_free_prom_memory(void)
{
unsigned long addr;
int i;
for (i = 0; i < boot_mem_map.nr_map; i++) {
if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
continue;
addr = boot_mem_map.map[i].addr;
free_init_pages("prom memory",
addr, addr + boot_mem_map.map[i].size);
}
}

View file

@ -0,0 +1,21 @@
#
# Copyright (C) 2009 Scientific-Atlanta, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
obj-$(CONFIG_PCI) += fixup-powertv.o
EXTRA_CFLAGS += -Wall -Werror

View file

@ -0,0 +1,36 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/mach-powertv/interrupts.h>
#include "powertv-pci.h"
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return asic_pcie_map_irq(dev, slot, pin);
}
/* Do platform specific device initialization at pci_enable_device() time */
int pcibios_plat_dev_init(struct pci_dev *dev)
{
return 0;
}
/*
* asic_pcie_map_irq
*
* Parameters:
* *dev - pointer to a pci_dev structure (not used)
* slot - slot number (not used)
* pin - pin number (not used)
*
* Return Value:
* Returns: IRQ number (always the PCI Express IRQ number)
*
* Description:
* asic_pcie_map_irq will return the IRQ number of the PCI Express interrupt.
*
*/
int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_pciexp;
}
EXPORT_SYMBOL(asic_pcie_map_irq);

View file

@ -0,0 +1,31 @@
/*
* powertv-pci.c
*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* Local definitions for the powertv PCI code
*/
#ifndef _POWERTV_PCI_POWERTV_PCI_H_
#define _POWERTV_PCI_POWERTV_PCI_H_
extern int asic_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
extern int asic_pcie_init(void);
extern int asic_pcie_init(void);
extern int log_level;
#endif

View file

@ -0,0 +1,26 @@
/*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#ifndef _POWERTV_POWERTV_CLOCK_H
#define _POWERTV_POWERTV_CLOCK_H
extern int powertv_clockevent_init(void);
extern void powertv_clocksource_init(void);
extern unsigned int mips_get_pll_freq(void);
#endif

View file

@ -0,0 +1,351 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/screen_info.h>
#include <linux/notifier.h>
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/ctype.h>
#include <linux/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/prom.h>
#include <asm/dma.h>
#include <linux/time.h>
#include <asm/traps.h>
#include <asm/asm-offsets.h>
#include "reset.h"
#define VAL(n) STR(n)
/*
* Macros for loading addresses and storing registers:
* PTR_LA Load the address into a register
* LONG_S Store the full width of the given register.
* LONG_L Load the full width of the given register
* PTR_ADDIU Add a constant value to a register used as a pointer
* REG_SIZE Number of 8-bit bytes in a full width register
*/
#ifdef CONFIG_64BIT
#warning TODO: 64-bit code needs to be verified
#define PTR_LA "dla "
#define LONG_S "sd "
#define LONG_L "ld "
#define PTR_ADDIU "daddiu "
#define REG_SIZE "8" /* In bytes */
#endif
#ifdef CONFIG_32BIT
#define PTR_LA "la "
#define LONG_S "sw "
#define LONG_L "lw "
#define PTR_ADDIU "addiu "
#define REG_SIZE "4" /* In bytes */
#endif
static struct pt_regs die_regs;
static bool have_die_regs;
static void register_panic_notifier(void);
static int panic_handler(struct notifier_block *notifier_block,
unsigned long event, void *cause_string);
const char *get_system_type(void)
{
return "PowerTV";
}
void __init plat_mem_setup(void)
{
panic_on_oops = 1;
register_panic_notifier();
#if 0
mips_pcibios_init();
#endif
mips_reboot_setup();
}
/*
* Install a panic notifier for platform-specific diagnostics
*/
static void register_panic_notifier()
{
static struct notifier_block panic_notifier = {
.notifier_call = panic_handler,
.next = NULL,
.priority = INT_MAX
};
atomic_notifier_chain_register(&panic_notifier_list, &panic_notifier);
}
static int panic_handler(struct notifier_block *notifier_block,
unsigned long event, void *cause_string)
{
struct pt_regs my_regs;
/* Save all of the registers */
{
unsigned long at, v0, v1; /* Must be on the stack */
/* Start by saving $at and v0 on the stack. We use $at
* ourselves, but it looks like the compiler may use v0 or v1
* to load the address of the pt_regs structure. We'll come
* back later to store the registers in the pt_regs
* structure. */
__asm__ __volatile__ (
".set noat\n"
LONG_S "$at, %[at]\n"
LONG_S "$2, %[v0]\n"
LONG_S "$3, %[v1]\n"
:
[at] "=m" (at),
[v0] "=m" (v0),
[v1] "=m" (v1)
:
: "at"
);
__asm__ __volatile__ (
".set noat\n"
"move $at, %[pt_regs]\n"
/* Argument registers */
LONG_S "$4, " VAL(PT_R4) "($at)\n"
LONG_S "$5, " VAL(PT_R5) "($at)\n"
LONG_S "$6, " VAL(PT_R6) "($at)\n"
LONG_S "$7, " VAL(PT_R7) "($at)\n"
/* Temporary regs */
LONG_S "$8, " VAL(PT_R8) "($at)\n"
LONG_S "$9, " VAL(PT_R9) "($at)\n"
LONG_S "$10, " VAL(PT_R10) "($at)\n"
LONG_S "$11, " VAL(PT_R11) "($at)\n"
LONG_S "$12, " VAL(PT_R12) "($at)\n"
LONG_S "$13, " VAL(PT_R13) "($at)\n"
LONG_S "$14, " VAL(PT_R14) "($at)\n"
LONG_S "$15, " VAL(PT_R15) "($at)\n"
/* "Saved" registers */
LONG_S "$16, " VAL(PT_R16) "($at)\n"
LONG_S "$17, " VAL(PT_R17) "($at)\n"
LONG_S "$18, " VAL(PT_R18) "($at)\n"
LONG_S "$19, " VAL(PT_R19) "($at)\n"
LONG_S "$20, " VAL(PT_R20) "($at)\n"
LONG_S "$21, " VAL(PT_R21) "($at)\n"
LONG_S "$22, " VAL(PT_R22) "($at)\n"
LONG_S "$23, " VAL(PT_R23) "($at)\n"
/* Add'l temp regs */
LONG_S "$24, " VAL(PT_R24) "($at)\n"
LONG_S "$25, " VAL(PT_R25) "($at)\n"
/* Kernel temp regs */
LONG_S "$26, " VAL(PT_R26) "($at)\n"
LONG_S "$27, " VAL(PT_R27) "($at)\n"
/* Global pointer, stack pointer, frame pointer and
* return address */
LONG_S "$gp, " VAL(PT_R28) "($at)\n"
LONG_S "$sp, " VAL(PT_R29) "($at)\n"
LONG_S "$fp, " VAL(PT_R30) "($at)\n"
LONG_S "$ra, " VAL(PT_R31) "($at)\n"
/* Now we can get the $at and v0 registers back and
* store them */
LONG_L "$8, %[at]\n"
LONG_S "$8, " VAL(PT_R1) "($at)\n"
LONG_L "$8, %[v0]\n"
LONG_S "$8, " VAL(PT_R2) "($at)\n"
LONG_L "$8, %[v1]\n"
LONG_S "$8, " VAL(PT_R3) "($at)\n"
:
:
[at] "m" (at),
[v0] "m" (v0),
[v1] "m" (v1),
[pt_regs] "r" (&my_regs)
: "at", "t0"
);
/* Set the current EPC value to be the current location in this
* function */
__asm__ __volatile__ (
".set noat\n"
"1:\n"
PTR_LA "$at, 1b\n"
LONG_S "$at, %[cp0_epc]\n"
:
[cp0_epc] "=m" (my_regs.cp0_epc)
:
: "at"
);
my_regs.cp0_cause = read_c0_cause();
my_regs.cp0_status = read_c0_status();
}
#ifdef CONFIG_DIAGNOSTICS
failure_report((char *) cause_string,
have_die_regs ? &die_regs : &my_regs);
have_die_regs = false;
#else
pr_crit("I'm feeling a bit sleepy. hmmmmm... perhaps a nap would... "
"zzzz... \n");
#endif
return NOTIFY_DONE;
}
/**
* Platform-specific handling of oops
* @str: Pointer to the oops string
* @regs: Pointer to the oops registers
* All we do here is to save the registers for subsequent printing through
* the panic notifier.
*/
void platform_die(const char *str, const struct pt_regs *regs)
{
/* If we already have saved registers, don't overwrite them as they
* they apply to the initial fault */
if (!have_die_regs) {
have_die_regs = true;
die_regs = *regs;
}
}
/* Information about the RF MAC address, if one was supplied on the
* command line. */
static bool have_rfmac;
static u8 rfmac[ETH_ALEN];
static int rfmac_param(char *p)
{
u8 *q;
bool is_high_nibble;
int c;
/* Skip a leading "0x", if present */
if (*p == '0' && *(p+1) == 'x')
p += 2;
q = rfmac;
is_high_nibble = true;
for (c = (unsigned char) *p++;
isxdigit(c) && q - rfmac < ETH_ALEN;
c = (unsigned char) *p++) {
int nibble;
nibble = (isdigit(c) ? (c - '0') :
(isupper(c) ? c - 'A' + 10 : c - 'a' + 10));
if (is_high_nibble)
*q = nibble << 4;
else
*q++ |= nibble;
is_high_nibble = !is_high_nibble;
}
/* If we parsed all the way to the end of the parameter value and
* parsed all ETH_ALEN bytes, we have a usable RF MAC address */
have_rfmac = (c == '\0' && q - rfmac == ETH_ALEN);
return 0;
}
early_param("rfmac", rfmac_param);
/*
* Generate an Ethernet MAC address that has a good chance of being unique.
* @addr: Pointer to six-byte array containing the Ethernet address
* Generates an Ethernet MAC address that is highly likely to be unique for
* this particular system on a network with other systems of the same type.
*
* The problem we are solving is that, when random_ether_addr() is used to
* generate MAC addresses at startup, there isn't much entropy for the random
* number generator to use and the addresses it produces are fairly likely to
* be the same as those of other identical systems on the same local network.
* This is true even for relatively small numbers of systems (for the reason
* why, see the Wikipedia entry for "Birthday problem" at:
* http://en.wikipedia.org/wiki/Birthday_problem
*
* The good news is that we already have a MAC address known to be unique, the
* RF MAC address. The bad news is that this address is already in use on the
* RF interface. Worse, the obvious trick, taking the RF MAC address and
* turning on the locally managed bit, has already been used for other devices.
* Still, this does give us something to work with.
*
* The approach we take is:
* 1. If we can't get the RF MAC Address, just call random_ether_addr.
* 2. Use the 24-bit NIC-specific bits of the RF MAC address as the last 24
* bits of the new address. This is very likely to be unique, except for
* the current box.
* 3. To avoid using addresses already on the current box, we set the top
* six bits of the address with a value different from any currently
* registered Scientific Atlanta organizationally unique identifyer
* (OUI). This avoids duplication with any addresses on the system that
* were generated from valid Scientific Atlanta-registered address by
* simply flipping the locally managed bit.
* 4. We aren't generating a multicast address, so we leave the multicast
* bit off. Since we aren't using a registered address, we have to set
* the locally managed bit.
* 5. We then randomly generate the remaining 16-bits. This does two
* things:
* a. It allows us to call this function for more than one device
* in this system
* b. It ensures that things will probably still work even if
* some device on the device network has a locally managed
* address that matches the top six bits from step 2.
*/
void platform_random_ether_addr(u8 addr[ETH_ALEN])
{
const int num_random_bytes = 2;
const unsigned char non_sciatl_oui_bits = 0xc0u;
const unsigned char mac_addr_locally_managed = (1 << 1);
if (!have_rfmac) {
pr_warning("rfmac not available on command line; "
"generating random MAC address\n");
random_ether_addr(addr);
}
else {
int i;
/* Set the first byte to something that won't match a Scientific
* Atlanta OUI, is locally managed, and isn't a multicast
* address */
addr[0] = non_sciatl_oui_bits | mac_addr_locally_managed;
/* Get some bytes of random address information */
get_random_bytes(&addr[1], num_random_bytes);
/* Copy over the NIC-specific bits of the RF MAC address */
for (i = 1 + num_random_bytes; i < ETH_ALEN; i++)
addr[i] = rfmac[i];
}
}

65
arch/mips/powertv/reset.c Normal file
View file

@ -0,0 +1,65 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/pm.h>
#include <linux/io.h>
#include <asm/reboot.h> /* Not included by linux/reboot.h */
#ifdef CONFIG_BOOTLOADER_DRIVER
#include <asm/mach-powertv/kbldr.h>
#endif
#include <asm/mach-powertv/asic_regs.h>
#include "reset.h"
static void mips_machine_restart(char *command);
static void mips_machine_halt(void);
static void mips_machine_restart(char *command)
{
#ifdef CONFIG_BOOTLOADER_DRIVER
/*
* Call the bootloader's reset function to ensure
* that persistent data is flushed before hard reset
*/
kbldr_SetCauseAndReset();
#else
writel(0x1, asic_reg_addr(watchdog));
#endif
}
static void mips_machine_halt(void)
{
#ifdef CONFIG_BOOTLOADER_DRIVER
/*
* Call the bootloader's reset function to ensure
* that persistent data is flushed before hard reset
*/
kbldr_SetCauseAndReset();
#else
writel(0x1, asic_reg_addr(watchdog));
#endif
}
void mips_reboot_setup(void)
{
_machine_restart = mips_machine_restart;
_machine_halt = mips_machine_halt;
pm_power_off = mips_machine_halt;
}

26
arch/mips/powertv/reset.h Normal file
View file

@ -0,0 +1,26 @@
/*
* Definitions from powertv reset.c file
*
* Copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
* Author: David VomLehn
*/
#ifndef _POWERTV_POWERTV_RESET_H
#define _POWERTV_POWERTV_RESET_H
extern void mips_reboot_setup(void);
#endif

37
arch/mips/powertv/time.c Normal file
View file

@ -0,0 +1,37 @@
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
* Portions copyright (C) 2009 Cisco Systems, Inc.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* Setting up the clock on the MIPS boards.
*/
#include <linux/init.h>
#include <asm/mach-powertv/interrupts.h>
#include <asm/time.h>
#include "powertv-clock.h"
unsigned int __cpuinit get_c0_compare_int(void)
{
return irq_mips_timer;
}
void __init plat_time_init(void)
{
powertv_clocksource_init();
r4k_clockevent_init();
}