diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 77d3e81a437b..8680a0f86c5a 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -56,6 +56,8 @@ properties: description: Indicates usage of spread-spectrum clocking. type: boolean + aspm-no-l0s: true + required: - reg - dma-ranges diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 8007d4aa76dc..b42140cff8ac 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -178,8 +178,9 @@ config ISCSI_IBFT Otherwise, say N. config RASPBERRYPI_FIRMWARE - tristate "Raspberry Pi Firmware Driver" + bool "Raspberry Pi Firmware Driver" depends on BCM2835_MBOX + default USB_PCI help This option enables support for communicating with the firmware on the Raspberry Pi. diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index da26a584dca0..a166ad0cec2c 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -12,6 +12,8 @@ #include #include #include +#include +#include #include #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) @@ -19,6 +21,8 @@ #define MBOX_DATA28(msg) ((msg) & ~0xf) #define MBOX_CHAN_PROPERTY 8 +#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50 + static struct platform_device *rpi_hwmon; static struct platform_device *rpi_clk; @@ -286,6 +290,63 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); +/* + * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that + * implements xHCI. After a PCI reset, VL805's firmware may either be loaded + * directly from an EEPROM or, if not present, by the SoC's co-processor, + * VideoCore. RPi4's VideoCore OS contains both the non public firmware load + * logic and the VL805 firmware blob. This function triggers the aforementioned + * process. + */ +int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + struct device_node *fw_np; + struct rpi_firmware *fw; + u32 dev_addr, version; + int ret; + + fw_np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (!fw_np) + return 0; + + fw = rpi_firmware_get(fw_np); + of_node_put(fw_np); + if (!fw) + return -ENODEV; + + /* + * Make sure we don't trigger a firmware load unnecessarily. + * + * If something went wrong with PCI, this whole exercise would be + * futile as VideoCore expects from us a configured PCI bus. Just take + * the faulty version (likely ~0) and let xHCI's registration fail + * further down the line. + */ + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); + if (version) + goto exit; + + dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | + PCI_FUNC(pdev->devfn) << 12; + + ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, + &dev_addr, sizeof(dev_addr)); + if (ret) + return ret; + + /* Wait for vl805 to startup */ + usleep_range(200, 1000); + + pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, + &version); +exit: + pci_info(pdev, "VL805 firmware version %08x\n", version); + + return 0; +} +EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); + static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 6d79d14527a6..7730ea845ff2 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -28,6 +28,8 @@ #include #include +#include + #include "../pci.h" /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ @@ -41,6 +43,9 @@ #define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c #define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff +#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY 0x04dc +#define PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK 0xc00 + #define PCIE_RC_DL_MDIO_ADDR 0x1100 #define PCIE_RC_DL_MDIO_WR_DATA 0x1104 #define PCIE_RC_DL_MDIO_RD_DATA 0x1108 @@ -54,11 +59,11 @@ #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c #define PCIE_MEM_WIN0_LO(win) \ - PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 4) + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + ((win) * 8) #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010 #define PCIE_MEM_WIN0_HI(win) \ - PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 4) + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + ((win) * 8) #define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c #define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f @@ -693,10 +698,11 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) int num_out_wins = 0; u16 nlw, cls, lnksta; int i, ret; - u32 tmp; + u32 tmp, aspm_support; /* Reset the bridge */ brcm_pcie_bridge_sw_init_set(pcie, 1); + brcm_pcie_perst_set(pcie, 1); usleep_range(100, 200); @@ -803,6 +809,15 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie) num_out_wins++; } + /* Don't advertise L0s capability if 'aspm-no-l0s' */ + aspm_support = PCIE_LINK_STATE_L1; + if (!of_property_read_bool(pcie->np, "aspm-no-l0s")) + aspm_support |= PCIE_LINK_STATE_L0S; + tmp = readl(base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + u32p_replace_bits(&tmp, aspm_support, + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY_ASPM_SUPPORT_MASK); + writel(tmp, base + PCIE_RC_CFG_PRIV1_LINK_CAPABILITY); + /* * For config space accesses on the RC, show the right class for * a PCIe-PCIe bridge (the default setting is to be EP mode). @@ -899,7 +914,6 @@ static void __brcm_pcie_remove(struct brcm_pcie *pcie) brcm_msi_remove(pcie); brcm_pcie_turn_off(pcie); clk_disable_unprepare(pcie->clk); - clk_put(pcie->clk); } static int brcm_pcie_remove(struct platform_device *pdev) @@ -917,11 +931,26 @@ static int brcm_pcie_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node, *msi_np; struct pci_host_bridge *bridge; + struct device_node *fw_np; struct brcm_pcie *pcie; struct pci_bus *child; struct resource *res; int ret; + /* + * We have to wait for Raspberry Pi's firmware interface to be up as a + * PCI fixup, rpi_firmware_init_vl805(), depends on it. This driver's + * probe can race with the firmware interface's (see + * drivers/firmware/raspberrypi.c) and potentially break the PCI fixup. + */ + fw_np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (fw_np && !rpi_firmware_get(fw_np)) { + of_node_put(fw_np); + return -EPROBE_DEFER; + } + of_node_put(fw_np); + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); if (!bridge) return -ENOMEM; diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index beb2efa71341..0dc34668bb2a 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -16,6 +16,9 @@ #include #include #include + +#include + #include "pci-quirks.h" #include "xhci-ext-caps.h" @@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) static void quirk_usb_early_handoff(struct pci_dev *pdev) { + int ret; + /* Skip Netlogic mips SoC's internal PCI USB controller. * This device does not need/support EHCI/OHCI handoff */ if (pdev->vendor == 0x184e) /* vendor Netlogic */ return; + + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { + ret = rpi_firmware_init_vl805(pdev); + if (ret) { + /* Firmware might be outdated, or something failed */ + dev_warn(&pdev->dev, + "Failed to load VL805's firmware: %d. Will continue to attempt to work, but bad things might happen. You should fix this...\n", + ret); + } + } + if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI && pdev->class != PCI_CLASS_SERIAL_USB_OHCI && pdev->class != PCI_CLASS_SERIAL_USB_EHCI && diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index 7800e12ee042..3025aca3c358 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -10,6 +10,7 @@ #include struct rpi_firmware; +struct pci_dev; enum rpi_firmware_property_status { RPI_FIRMWARE_STATUS_REQUEST = 0, @@ -90,7 +91,7 @@ enum rpi_firmware_property_tag { RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, - + RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058, /* Dispmanx TAGS */ RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, @@ -141,6 +142,7 @@ int rpi_firmware_property(struct rpi_firmware *fw, int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); +int rpi_firmware_init_vl805(struct pci_dev *pdev); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len) @@ -158,6 +160,11 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware { return NULL; } + +static inline int rpi_firmware_init_vl805(struct pci_dev *pdev) +{ + return 0; +} #endif #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */