v3.10 SoC updates for DaVinci

This set of patches add support for remoteproc
 used to control the DSP and also fix sparse
 errors existing for quite some time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJRbtTBAAoJEGFBu2jqvgRNcY0P/0x7dNvJqCOCe/AY2BUYSkD9
 jnYXAiLNL9BdkJ1jrE2cpfagwc/kMmW6B5e+LLcNiS/u2vO7G8JaUtNLHtcX/k7f
 1lresoSp95mIzHdW15DGBOcHkq8llQsI2hp8tmG50NN0OMWSOK9K3nwZtQl9CEPd
 5Jqs4yU+7mJzYXcttmF8TWOlqH1JHjmqD83REdWxprSHmGr4VHnthu1FpFQc0e4v
 LNNmRslCZEvPJn49sv3joyXbTMxLAcsW5PkghDPS0r0nBIHr5/l3XzyvTI+Z3EMU
 fSBsvrfugP00LAiC1kTJD8FI5UQKTBN+zIlx6XVFJKcMCPpT9U5Fk4rxaqhA3prv
 wTo0EJ7Y4Zby7uwr64R5Fwfit42X6CwbJHQH3X5fOxPaI//5QKXdPjNC3LYl36uh
 K92JqXPmg8kVudfKW8qnGgNkYIuyWDLz1B09ztmcucZBPszw/2kfALADVtA/Fb25
 OeSHXrKqtcqhsdwsCAgTvhylTmolkhcqAyc6krRdY/Gco8rHfUP/L03jvpSy+Mls
 T1splMzLeHCHTmDyTy8fsANtmggYLxwiVFkqX8ig9VZiMwhpZk1YdAC+B/KzZ04G
 PNEFMdx+sba5rZrM+wUIrmyVNEPkvvMcv6ppDDk/QEaBpWRIcyrM1E4T+RJaIOfu
 v/ojsO+W9wE+CR3u76GE
 =ldiG
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v3.10/soc-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

From Sekhar Nori:
v3.10 SoC updates for DaVinci

This set of patches add support for remoteproc
used to control the DSP and also fix sparse
errors existing for quite some time.

* tag 'davinci-for-v3.10/soc-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: ensure global variables are declared
  ARM: davinci: sram.c: fix incorrect type in assignment
  ARM: davinci: da8xx dt: make file local symbols static
  ARM: davinci: da8xx: add remoteproc support

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2013-04-17 23:53:11 -07:00
commit a100caaf12
7 changed files with 103 additions and 5 deletions

View file

@ -44,6 +44,7 @@ parameter is applicable:
AVR32 AVR32 architecture is enabled.
AX25 Appropriate AX.25 support is enabled.
BLACKFIN Blackfin architecture is enabled.
CMA Contiguous Memory Area support is enabled.
DRM Direct Rendering Management support is enabled.
DYNAMIC_DEBUG Build in debug messages and enable them at runtime
EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
@ -2663,6 +2664,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
Useful for devices that are detected asynchronously
(e.g. USB and MMC devices).
rproc_mem=nn[KMG][@address]
[KNL,ARM,CMA] Remoteproc physical memory block.
Memory area to be used by remote processor image,
managed by CMA.
rw [KNL] Mount root device read-write on boot
S [KNL] Run init in single mode

View file

@ -20,7 +20,7 @@
#define DA8XX_NUM_UARTS 3
void __init da8xx_uart_clk_enable(void)
static void __init da8xx_uart_clk_enable(void)
{
int i;
for (i = 0; i < DA8XX_NUM_UARTS; i++)
@ -37,7 +37,7 @@ static void __init da8xx_init_irq(void)
of_irq_init(da8xx_irq_match);
}
struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
OF_DEV_AUXDATA("ti,da830-mmc", 0x01c40000, "da830-mmc.0", NULL),

View file

@ -12,7 +12,7 @@
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/dma-contiguous.h>
#include <linux/serial_8250.h>
#include <linux/ahci_platform.h>
#include <linux/clk.h>
@ -714,6 +714,92 @@ int __init da850_register_mmcsd1(struct davinci_mmc_config *config)
}
#endif
static struct resource da8xx_rproc_resources[] = {
{ /* DSP boot address */
.start = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG,
.end = DA8XX_SYSCFG0_BASE + DA8XX_HOST1CFG_REG + 3,
.flags = IORESOURCE_MEM,
},
{ /* DSP interrupt registers */
.start = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG,
.end = DA8XX_SYSCFG0_BASE + DA8XX_CHIPSIG_REG + 7,
.flags = IORESOURCE_MEM,
},
{ /* dsp irq */
.start = IRQ_DA8XX_CHIPINT0,
.end = IRQ_DA8XX_CHIPINT0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da8xx_dsp = {
.name = "davinci-rproc",
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(da8xx_rproc_resources),
.resource = da8xx_rproc_resources,
};
#if IS_ENABLED(CONFIG_DA8XX_REMOTEPROC)
static phys_addr_t rproc_base __initdata;
static unsigned long rproc_size __initdata;
static int __init early_rproc_mem(char *p)
{
char *endp;
if (p == NULL)
return 0;
rproc_size = memparse(p, &endp);
if (*endp == '@')
rproc_base = memparse(endp + 1, NULL);
return 0;
}
early_param("rproc_mem", early_rproc_mem);
void __init da8xx_rproc_reserve_cma(void)
{
int ret;
if (!rproc_base || !rproc_size) {
pr_err("%s: 'rproc_mem=nn@address' badly specified\n"
" 'nn' and 'address' must both be non-zero\n",
__func__);
return;
}
pr_info("%s: reserving 0x%lx @ 0x%lx...\n",
__func__, rproc_size, (unsigned long)rproc_base);
ret = dma_declare_contiguous(&da8xx_dsp.dev, rproc_size, rproc_base, 0);
if (ret)
pr_err("%s: dma_declare_contiguous failed %d\n", __func__, ret);
}
#else
void __init da8xx_rproc_reserve_cma(void)
{
}
#endif
int __init da8xx_register_rproc(void)
{
int ret;
ret = platform_device_register(&da8xx_dsp);
if (ret)
pr_err("%s: can't register DSP device: %d\n", __func__, ret);
return ret;
};
static struct resource da8xx_rtc_resources[] = {
{
.start = DA8XX_RTC_BASE,

View file

@ -54,6 +54,8 @@ extern unsigned int da850_max_speed;
#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000)
#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x))
#define DA8XX_JTAG_ID_REG 0x18
#define DA8XX_HOST1CFG_REG 0x44
#define DA8XX_CHIPSIG_REG 0x174
#define DA8XX_CFGCHIP0_REG 0x17c
#define DA8XX_CFGCHIP1_REG 0x180
#define DA8XX_CFGCHIP2_REG 0x184
@ -105,6 +107,8 @@ int __init da850_register_vpif_display
int __init da850_register_vpif_capture
(struct vpif_capture_config *capture_config);
void da8xx_restart(char mode, const char *cmd);
void da8xx_rproc_reserve_cma(void);
int da8xx_register_rproc(void);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;

View file

@ -19,6 +19,7 @@
#include <asm/delay.h>
#include <asm/io.h>
#include <mach/common.h>
#include <mach/da8xx.h>
#include <mach/sram.h>
#include <mach/pm.h>

View file

@ -62,7 +62,7 @@ static int __init sram_init(void)
phys_addr_t phys = davinci_soc_info.sram_dma;
unsigned len = davinci_soc_info.sram_len;
int status = 0;
void *addr;
void __iomem *addr;
if (len) {
len = min_t(unsigned, len, SRAM_SIZE);
@ -75,7 +75,7 @@ static int __init sram_init(void)
addr = ioremap(phys, len);
if (!addr)
return -ENOMEM;
status = gen_pool_add_virt(sram_pool, (unsigned)addr,
status = gen_pool_add_virt(sram_pool, (unsigned long) addr,
phys, len, -1);
if (status < 0)
iounmap(addr);

View file

@ -10,6 +10,7 @@
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/da8xx.h>
#include <linux/platform_data/usb-davinci.h>
#define DAVINCI_USB_OTG_BASE 0x01c64000