OF: MIPS: lantiq: implement OF support

Activate USE_OF, add a sample DTS file and convert the core soc code to OF.

Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3803/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
John Crispin 2012-04-13 20:56:13 +02:00 committed by Ralf Baechle
parent cd93b4895e
commit a0392222d9
11 changed files with 294 additions and 77 deletions

View File

@ -229,6 +229,7 @@ config LANTIQ
select SWAP_IO_SPACE
select BOOT_RAW
select HAVE_CLK
select USE_OF
config LASAT
bool "LASAT Networks platforms"

View File

@ -18,4 +18,13 @@ config SOC_XWAY
select HW_HAS_PCI
endchoice
choice
prompt "Devicetree"
config DT_EASY50712
bool "Easy50712"
depends on SOC_XWAY
endchoice
endif

View File

@ -4,7 +4,9 @@
# under the terms of the GNU General Public License version 2 as published
# by the Free Software Foundation.
obj-y := irq.o setup.o clk.o prom.o
obj-y := irq.o clk.o prom.o
obj-y += dts/
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o

View File

@ -0,0 +1,4 @@
obj-$(CONFIG_DT_EASY50712) := easy50712.dtb.o
$(obj)/%.dtb: $(obj)/%.dts
$(call if_changed,dtc)

View File

@ -0,0 +1,105 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,xway", "lantiq,danube";
cpus {
cpu@0 {
compatible = "mips,mips24Kc";
};
};
biu@1F800000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,biu", "simple-bus";
reg = <0x1F800000 0x800000>;
ranges = <0x0 0x1F800000 0x7FFFFF>;
icu0: icu@80200 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
reg = <0x80200 0x120>;
};
watchdog@803F0 {
compatible = "lantiq,wdt";
reg = <0x803F0 0x10>;
};
};
sram@1F000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,sram";
reg = <0x1F000000 0x800000>;
ranges = <0x0 0x1F000000 0x7FFFFF>;
eiu0: eiu@101000 {
#interrupt-cells = <1>;
interrupt-controller;
interrupt-parent;
compatible = "lantiq,eiu-xway";
reg = <0x101000 0x1000>;
};
pmu0: pmu@102000 {
compatible = "lantiq,pmu-xway";
reg = <0x102000 0x1000>;
};
cgu0: cgu@103000 {
compatible = "lantiq,cgu-xway";
reg = <0x103000 0x1000>;
#clock-cells = <1>;
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xway";
reg = <0x203000 0x1000>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xEEFFFFF>;
reg = <0x10000000 0xEF00000>;
gptu@E100A00 {
compatible = "lantiq,gptu-xway";
reg = <0xE100A00 0x100>;
};
serial@E100C00 {
compatible = "lantiq,asc";
reg = <0xE100C00 0x400>;
interrupt-parent = <&icu0>;
interrupts = <112 113 114>;
};
dma0: dma@E104100 {
compatible = "lantiq,dma-xway";
reg = <0xE104100 0x800>;
};
ebu0: ebu@E105300 {
compatible = "lantiq,ebu-xway";
reg = <0xE105300 0x100>;
};
pci0: pci@E105400 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
reg = <0x7000000 0x8000 /* config space */
0xE105400 0x400>; /* pci bridge */
};
};
};

View File

@ -0,0 +1,113 @@
/dts-v1/;
/include/ "danube.dtsi"
/ {
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>; /* 64 KB */
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>; /* 64 KB */
};
partition@20000 {
label = "linux";
reg = <0x20000 0x3d0000>;
};
partition@400000 {
label = "rootfs";
reg = <0x400000 0x400000>;
};
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xway";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6"; /* stp */
lantiq,open-drain;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
stp0: stp@E100BB0 {
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
pci@E105400 {
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
>;
gpios-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
};

View File

@ -8,6 +8,7 @@
#include <linux/export.h>
#include <linux/clk.h>
#include <linux/of_platform.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
@ -16,13 +17,15 @@
#include "prom.h"
#include "clk.h"
static struct ltq_soc_info soc_info;
/* access to the ebu needs to be locked between different drivers */
DEFINE_SPINLOCK(ebu_lock);
EXPORT_SYMBOL_GPL(ebu_lock);
unsigned int ltq_get_cpu_ver(void)
{
return soc_info.rev;
}
EXPORT_SYMBOL(ltq_get_cpu_ver);
/*
* this struct is filled by the soc specific detection code and holds
* information about the specific soc type, revision and name
*/
static struct ltq_soc_info soc_info;
unsigned int ltq_get_soc_type(void)
{
@ -57,16 +60,28 @@ static void __init prom_init_cmdline(void)
}
}
void __init plat_mem_setup(void)
{
ioport_resource.start = IOPORT_RESOURCE_START;
ioport_resource.end = IOPORT_RESOURCE_END;
iomem_resource.start = IOMEM_RESOURCE_START;
iomem_resource.end = IOMEM_RESOURCE_END;
set_io_port_base((unsigned long) KSEG1);
/*
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
__dt_setup_arch(&__dtb_start);
}
void __init prom_init(void)
{
struct clk *clk;
/* call the soc specific detetcion code and get it to fill soc_info */
ltq_soc_detect(&soc_info);
clk_init();
clk = clk_get(0, "cpu");
snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d",
soc_info.name, soc_info.rev);
clk_put(clk);
snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev %s",
soc_info.name, soc_info.rev_type);
soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0';
pr_info("SoC: %s\n", soc_info.sys_type);
prom_init_cmdline();
@ -76,3 +91,19 @@ void __init prom_init(void)
panic("failed to register_vsmp_smp_ops()");
#endif
}
int __init plat_of_setup(void)
{
static struct of_device_id of_ids[3];
if (!of_have_populated_dt())
panic("device tree not present");
strncpy(of_ids[0].compatible, soc_info.compatible,
sizeof(of_ids[0].compatible));
strncpy(of_ids[1].compatible, "simple-bus",
sizeof(of_ids[1].compatible));
return of_platform_bus_probe(NULL, of_ids, NULL);
}
arch_initcall(plat_of_setup);

View File

@ -26,4 +26,6 @@ struct ltq_soc_info {
extern void ltq_soc_detect(struct ltq_soc_info *i);
extern void ltq_soc_init(void);
extern struct boot_param_header __dtb_start;
#endif

View File

@ -1,43 +0,0 @@
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Copyright (C) 2010 John Crispin <blogic@openwrt.org>
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <asm/bootinfo.h>
#include <lantiq_soc.h>
#include "prom.h"
void __init plat_mem_setup(void)
{
/* assume 16M as default incase uboot fails to pass proper ramsize */
unsigned long memsize = 16;
char **envp = (char **) KSEG1ADDR(fw_arg2);
ioport_resource.start = IOPORT_RESOURCE_START;
ioport_resource.end = IOPORT_RESOURCE_END;
iomem_resource.start = IOMEM_RESOURCE_START;
iomem_resource.end = IOMEM_RESOURCE_END;
set_io_port_base((unsigned long) KSEG1);
while (*envp) {
char *e = (char *)KSEG1ADDR(*envp);
if (!strncmp(e, "memsize=", 8)) {
e += 8;
if (strict_strtoul(e, 0, &memsize))
pr_warn("bad memsize specified\n");
}
envp++;
}
memsize *= 1024 * 1024;
add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
}

View File

@ -14,10 +14,6 @@
#include <lantiq_soc.h>
/* all access to the ebu must be locked */
DEFINE_SPINLOCK(ebu_lock);
EXPORT_SYMBOL_GPL(ebu_lock);
static struct resource ltq_ebu_resource = {
.name = "ebu",
.start = LTQ_EBU_BASE_ADDR,

View File

@ -37,13 +37,6 @@
#define RCU_BOOT_SEL_SHIFT 26
#define RCU_BOOT_SEL_MASK 0x7
static struct resource ltq_rcu_resource = {
.name = "rcu",
.start = LTQ_RCU_BASE_ADDR,
.end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
.flags = IORESOURCE_MEM,
};
/* remapped base addr of the reset control unit */
static void __iomem *ltq_rcu_membase;
@ -91,17 +84,21 @@ static void ltq_machine_power_off(void)
static int __init mips_reboot_setup(void)
{
/* insert and request the memory region */
if (insert_resource(&iomem_resource, &ltq_rcu_resource) < 0)
panic("Failed to insert rcu memory");
struct resource res;
struct device_node *np =
of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
if (request_mem_region(ltq_rcu_resource.start,
resource_size(&ltq_rcu_resource), "rcu") < 0)
panic("Failed to request rcu memory");
/* check if all the reset register range is available */
if (!np)
panic("Failed to load reset resources from devicetree");
/* remap rcu register range */
ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
resource_size(&ltq_rcu_resource));
if (of_address_to_resource(np, 0, &res))
panic("Failed to get rcu memory range");
if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
pr_err("Failed to request rcu memory");
ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res));
if (!ltq_rcu_membase)
panic("Failed to remap core memory");