mirror of
https://github.com/torvalds/linux
synced 2024-09-20 11:07:02 +00:00
Devicetree updates for v5.15:
- Refactor arch kdump DT related code to a common implementation - Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight', 'resets', and 'pwm' properties - Various clean-ups to DT FDT code - Fix a runtime error for !CONFIG_SYSFS - Convert Synopsys DW PCI and derivative binding docs to schemas. Add Toshiba Visconti PCIe binding. - Convert a bunch of memory controller bindings to schemas - Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards, brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema. - Extend nvmem bindings to handle bit offsets in unit-addresses - Add DT schemas for HiKey 970 PCIe PHY - Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings - Enable dtc pci_device_reg warning by default - Fixes for handling 'unevaluatedProperties' in preparation to enable pending support in the tooling for jsonschema 2020-12 draft -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmEuWEsQHHJvYmhAa2Vy bmVsLm9yZwAKCRD6+121jbxhw+CtD/45m84GisULb7FFmlo+WY2SbzE8a+MUEXo0 5ZZoMViSvBchphap9ueFNDdrLMUOHMsFaxHuTCUxXr4tq7EOemM7Br4OLiwiRrM5 o2CwBvXYu+49c4UKVFMM6RCKFiXvw5NLI4Twpj4Ge8farHvt9Ecwtq+Y+RYWgFk2 xwXWut7ZK3zBU6B+s4MRBATCFTD5oC4pAJIK3OQUlUPqZEQqdTRBKv5lyg+VUY2k eU0Cyzm0dZAmtjAu8ovhVNLfK1pp165QiaFIE1qh5H3ZVZAJlNyqN4jBDx9E4pLj BeazrsqfOkC8mZC+T7TgixhwB6D+r6/JW9NiCjYbarXibIsUOKSTKtj8XR8eZF/g sLeVDx33U5S+dlj1OB7scwq4Q9sG27ii2rlkvafA5KKBjoR2dzz7o9JesCV1Guha goPXmcd08e+KrjINxVc6gk4Y+KG8u+G7qnXnnmSatESJKxiDu1OgU3L16mlTJFaM hBmrh5rx1y8EkQnzgceTZIIWh30poSQKKyDB6Ta4Dude5JE+rS30oVURDR7MIrav rY70OYOiSq/nCcC7bc0Yu0UxJi+bwH28WvsD0aeCUOBTFsnI4j2uvsPsh3Aq74O0 UbQmUCMxhpmsDVdIOqlS1IVH8M79I+BrDTPVP6EE96ttoj9FbSi6AgjeGJzVMC99 EhtWe+gKTQ== =28CD -----END PGP SIGNATURE----- Merge tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Refactor arch kdump DT related code to a common implementation - Add fw_devlink tracking for 'phy-handle', 'leds', 'backlight', 'resets', and 'pwm' properties - Various clean-ups to DT FDT code - Fix a runtime error for !CONFIG_SYSFS - Convert Synopsys DW PCI and derivative binding docs to schemas. Add Toshiba Visconti PCIe binding. - Convert a bunch of memory controller bindings to schemas - Covert eeprom-93xx46, Samsung Exynos TRNG, Samsung Exynos IRQ combiner, arm-charlcd, img-ascii-lcd, UniPhier eFuse, Xilinx Zynq MPSoC FPGA, Xilinx Zynq MPSoC reset, Mediatek mmsys, Gemini boards, brcm,iproc-i2c, faraday,ftpci100, and ks8851 net to DT schema. - Extend nvmem bindings to handle bit offsets in unit-addresses - Add DT schemas for HiKey 970 PCIe PHY - Remove unused ZTE, energymicro,efm32-timer, and Exynos SATA bindings - Enable dtc pci_device_reg warning by default - Fixes for handling 'unevaluatedProperties' in preparation to enable pending support in the tooling for jsonschema 2020-12 draft * tag 'devicetree-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) dt-bindings: display: remove zte,vou.txt binding doc dt-bindings: hwmon: merge max1619 into trivial devices dt-bindings: mtd-physmap: Add 'arm,vexpress-flash' compatible dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries dt-bindings: Add vendor prefix for Topic Embedded Systems of: fdt: Rename reserve_elfcorehdr() to fdt_reserve_elfcorehdr() arm64: kdump: Remove custom linux,usable-memory-range handling arm64: kdump: Remove custom linux,elfcorehdr handling riscv: Remove non-standard linux,elfcorehdr handling of: fdt: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD) instead of #ifdef of: fdt: Add generic support for handling usable memory range property of: fdt: Add generic support for handling elf core headers property crash_dump: Make elfcorehdr address/size symbols always visible dt-bindings: memory: convert Samsung Exynos DMC to dtschema dt-bindings: devfreq: event: convert Samsung Exynos PPMU to dtschema dt-bindings: devfreq: event: convert Samsung Exynos NoCP to dtschema kbuild: Enable dtc 'pci_device_reg' warning by default dt-bindings: soc: remove obsolete zte zx header dt-bindings: clock: remove obsolete zte zx header ...
This commit is contained in:
Linus Torvalds
commit
9e5f3ffcf1
|
|
@ -28,7 +28,7 @@ find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
|
|||
|
||||
quiet_cmd_yamllint = LINT $(src)
|
||||
cmd_yamllint = ($(find_cmd) | \
|
||||
xargs $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint) || true
|
||||
xargs $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
|
||||
|
||||
quiet_cmd_chk_bindings = CHKDT $@
|
||||
cmd_chk_bindings = ($(find_cmd) | \
|
||||
|
|
|
|||
|
|
@ -1,108 +0,0 @@
|
|||
Cortina systems Gemini platforms
|
||||
|
||||
The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
|
||||
produced by Storlink Semiconductor around 2005. The company was renamed
|
||||
later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
|
||||
It was derived from earlier products from Storm named SL3316 (Centroid) and
|
||||
SL3512 (Bulverde).
|
||||
|
||||
Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
|
||||
produced and used for NAS and similar usecases. In 2014 Cortina Systems was
|
||||
in turn acquired by Inphi, who seem to have discontinued this product family.
|
||||
|
||||
Many of the IP blocks used in the SoC comes from Faraday Technology.
|
||||
|
||||
Required properties (in root node):
|
||||
compatible = "cortina,gemini";
|
||||
|
||||
Required nodes:
|
||||
|
||||
- soc: the SoC should be represented by a simple bus encompassing all the
|
||||
onchip devices, this is referred to as the soc bus node.
|
||||
|
||||
- syscon: the soc bus node must have a system controller node pointing to the
|
||||
global control registers, with the compatible string
|
||||
"cortina,gemini-syscon", "syscon";
|
||||
|
||||
Required properties on the syscon:
|
||||
- reg: syscon register location and size.
|
||||
- #clock-cells: should be set to <1> - the system controller is also a
|
||||
clock provider.
|
||||
- #reset-cells: should be set to <1> - the system controller is also a
|
||||
reset line provider.
|
||||
|
||||
The clock sources have shorthand defines in the include file:
|
||||
<dt-bindings/clock/cortina,gemini-clock.h>
|
||||
|
||||
The reset lines have shorthand defines in the include file:
|
||||
<dt-bindings/reset/cortina,gemini-reset.h>
|
||||
|
||||
- timer: the soc bus node must have a timer node pointing to the SoC timer
|
||||
block, with the compatible string "cortina,gemini-timer"
|
||||
See: clocksource/cortina,gemini-timer.txt
|
||||
|
||||
- interrupt-controller: the sob bus node must have an interrupt controller
|
||||
node pointing to the SoC interrupt controller block, with the compatible
|
||||
string "cortina,gemini-interrupt-controller"
|
||||
See interrupt-controller/cortina,gemini-interrupt-controller.txt
|
||||
|
||||
Example:
|
||||
|
||||
/ {
|
||||
model = "Foo Gemini Machine";
|
||||
compatible = "cortina,gemini";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x8000000>;
|
||||
};
|
||||
|
||||
soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
compatible = "simple-bus";
|
||||
interrupt-parent = <&intcon>;
|
||||
|
||||
syscon: syscon@40000000 {
|
||||
compatible = "cortina,gemini-syscon", "syscon";
|
||||
reg = <0x40000000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
|
||||
uart0: serial@42000000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x42000000 0x100>;
|
||||
resets = <&syscon GEMINI_RESET_UART>;
|
||||
clocks = <&syscon GEMINI_CLK_UART>;
|
||||
interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reg-shift = <2>;
|
||||
};
|
||||
|
||||
timer@43000000 {
|
||||
compatible = "cortina,gemini-timer";
|
||||
reg = <0x43000000 0x1000>;
|
||||
interrupt-parent = <&intcon>;
|
||||
interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
|
||||
<15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
|
||||
<16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
|
||||
resets = <&syscon GEMINI_RESET_TIMER>;
|
||||
/* APB clock or RTC clock */
|
||||
clocks = <&syscon GEMINI_CLK_APB>,
|
||||
<&syscon GEMINI_CLK_RTC>;
|
||||
clock-names = "PCLK", "EXTCLK";
|
||||
syscon = <&syscon>;
|
||||
};
|
||||
|
||||
intcon: interrupt-controller@48000000 {
|
||||
compatible = "cortina,gemini-interrupt-controller";
|
||||
reg = <0x48000000 0x1000>;
|
||||
resets = <&syscon GEMINI_RESET_INTCON0>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
95
Documentation/devicetree/bindings/arm/gemini.yaml
Normal file
95
Documentation/devicetree/bindings/arm/gemini.yaml
Normal file
|
|
@ -0,0 +1,95 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/arm/gemini.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Cortina systems Gemini platforms
|
||||
|
||||
description: |
|
||||
The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
|
||||
produced by Storlink Semiconductor around 2005. The company was renamed
|
||||
later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
|
||||
It was derived from earlier products from Storm named SL3316 (Centroid) and
|
||||
SL3512 (Bulverde).
|
||||
|
||||
Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
|
||||
produced and used for NAS and similar usecases. In 2014 Cortina Systems was
|
||||
in turn acquired by Inphi, who seem to have discontinued this product family.
|
||||
|
||||
Many of the IP blocks used in the SoC comes from Faraday Technology.
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
const: '/'
|
||||
compatible:
|
||||
oneOf:
|
||||
|
||||
- description: Storlink Semiconductor Gemini324 EV-Board also known
|
||||
as Storm Semiconductor SL93512R_BRD
|
||||
items:
|
||||
- const: storlink,gemini324
|
||||
- const: storm,sl93512r
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: D-Link DIR-685 Xtreme N Storage Router
|
||||
items:
|
||||
- const: dlink,dir-685
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: D-Link DNS-313 1-Bay Network Storage Enclosure
|
||||
items:
|
||||
- const: dlink,dns-313
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: Edimax NS-2502
|
||||
items:
|
||||
- const: edimax,ns-2502
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: ITian Square One SQ201
|
||||
items:
|
||||
- const: itian,sq201
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: Raidsonic NAS IB-4220-B
|
||||
items:
|
||||
- const: raidsonic,ib-4220-b
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: SSI 1328
|
||||
items:
|
||||
- const: ssi,1328
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: Teltonika RUT1xx Mobile Router
|
||||
items:
|
||||
- const: teltonika,rut1xx
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: Wiligear Wiliboard WBD-111
|
||||
items:
|
||||
- const: wiligear,wiliboard-wbd111
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: Wiligear Wiliboard WBD-222
|
||||
items:
|
||||
- const: wiligear,wiliboard-wbd222
|
||||
- const: cortina,gemini
|
||||
|
||||
- description: Wiligear Wiliboard WBD-111 - old incorrect binding
|
||||
items:
|
||||
- const: wiliboard,wbd111
|
||||
- const: cortina,gemini
|
||||
deprecated: true
|
||||
|
||||
- description: Wiligear Wiliboard WBD-222 - old incorrect binding
|
||||
items:
|
||||
- const: wiliboard,wbd222
|
||||
- const: cortina,gemini
|
||||
deprecated: true
|
||||
|
||||
additionalProperties: true
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
Mediatek mmsys controller
|
||||
============================
|
||||
|
||||
The Mediatek mmsys system controller provides clock control, routing control,
|
||||
and miscellaneous control in mmsys partition.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: Should be one of:
|
||||
- "mediatek,mt2701-mmsys", "syscon"
|
||||
- "mediatek,mt2712-mmsys", "syscon"
|
||||
- "mediatek,mt6765-mmsys", "syscon"
|
||||
- "mediatek,mt6779-mmsys", "syscon"
|
||||
- "mediatek,mt6797-mmsys", "syscon"
|
||||
- "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
|
||||
- "mediatek,mt8167-mmsys", "syscon"
|
||||
- "mediatek,mt8173-mmsys", "syscon"
|
||||
- "mediatek,mt8183-mmsys", "syscon"
|
||||
- #clock-cells: Must be 1
|
||||
|
||||
For the clock control, the mmsys controller uses the common clk binding from
|
||||
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
||||
The available clocks are defined in dt-bindings/clock/mt*-clk.h.
|
||||
|
||||
Example:
|
||||
|
||||
mmsys: syscon@14000000 {
|
||||
compatible = "mediatek,mt8173-mmsys", "syscon";
|
||||
reg = <0 0x14000000 0 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
|
@ -0,0 +1,58 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#"
|
||||
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
||||
|
||||
title: MediaTek mmsys controller
|
||||
|
||||
maintainers:
|
||||
- Matthias Brugger <matthias.bgg@gmail.com>
|
||||
|
||||
description:
|
||||
The MediaTek mmsys system controller provides clock control, routing control,
|
||||
and miscellaneous control in mmsys partition.
|
||||
|
||||
properties:
|
||||
$nodename:
|
||||
pattern: "^syscon@[0-9a-f]+$"
|
||||
|
||||
compatible:
|
||||
oneOf:
|
||||
- items:
|
||||
- enum:
|
||||
- mediatek,mt2701-mmsys
|
||||
- mediatek,mt2712-mmsys
|
||||
- mediatek,mt6765-mmsys
|
||||
- mediatek,mt6779-mmsys
|
||||
- mediatek,mt6797-mmsys
|
||||
- mediatek,mt8167-mmsys
|
||||
- mediatek,mt8173-mmsys
|
||||
- mediatek,mt8183-mmsys
|
||||
- mediatek,mt8365-mmsys
|
||||
- const: syscon
|
||||
- items:
|
||||
- const: mediatek,mt7623-mmsys
|
||||
- const: mediatek,mt2701-mmsys
|
||||
- const: syscon
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
"#clock-cells":
|
||||
const: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- "#clock-cells"
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
mmsys: syscon@14000000 {
|
||||
compatible = "mediatek,mt8173-mmsys", "syscon";
|
||||
reg = <0x14000000 0x1000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
|
@ -1,30 +0,0 @@
|
|||
* Samsung AHCI SATA Controller
|
||||
|
||||
SATA nodes are defined to describe on-chip Serial ATA controllers.
|
||||
Each SATA controller should have its own node.
|
||||
|
||||
Required properties:
|
||||
- compatible : compatible list, contains "samsung,exynos5-sata"
|
||||
- interrupts : <interrupt mapping for SATA IRQ>
|
||||
- reg : <registers mapping>
|
||||
- samsung,sata-freq : <frequency in MHz>
|
||||
- phys : Must contain exactly one entry as specified
|
||||
in phy-bindings.txt
|
||||
- phy-names : Must be "sata-phy"
|
||||
|
||||
Optional properties:
|
||||
- clocks : Must contain an entry for each entry in clock-names.
|
||||
- clock-names : Shall be "sata" for the external SATA bus clock,
|
||||
and "sclk_sata" for the internal controller clock.
|
||||
|
||||
Example:
|
||||
sata@122f0000 {
|
||||
compatible = "snps,dwc-ahci";
|
||||
samsung,sata-freq = <66>;
|
||||
reg = <0x122f0000 0x1ff>;
|
||||
interrupts = <0 115 0>;
|
||||
clocks = <&clock 277>, <&clock 143>;
|
||||
clock-names = "sata", "sclk_sata";
|
||||
phys = <&sata_phy>;
|
||||
phy-names = "sata-phy";
|
||||
};
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/auxdisplay/arm,versatile-lcd.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ARM Versatile Character LCD
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
- Rob Herring <robh@kernel.org>
|
||||
|
||||
description:
|
||||
This binding defines the character LCD interface found on ARM Versatile AB
|
||||
and PB reference platforms.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: arm,versatile-lcd
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
clock-names:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
lcd@10008000 {
|
||||
compatible = "arm,versatile-lcd";
|
||||
reg = <0x10008000 0x1000>;
|
||||
};
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
ARM Versatile Character LCD
|
||||
-----------------------------------------------------
|
||||
This binding defines the character LCD interface found on ARM Versatile AB
|
||||
and PB reference platforms.
|
||||
|
||||
Required properties:
|
||||
- compatible : "arm,versatile-clcd"
|
||||
- reg : Location and size of character LCD registers
|
||||
|
||||
Optional properties:
|
||||
- interrupts - single interrupt for character LCD. The character LCD can
|
||||
operate in polled mode without an interrupt.
|
||||
|
||||
Example:
|
||||
lcd@10008000 {
|
||||
compatible = "arm,versatile-lcd";
|
||||
reg = <0x10008000 0x1000>;
|
||||
};
|
||||
|
|
@ -0,0 +1,55 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/auxdisplay/img,ascii-lcd.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: ASCII LCD displays on Imagination Technologies boards
|
||||
|
||||
maintainers:
|
||||
- Paul Burton <paulburton@kernel.org>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- img,boston-lcd
|
||||
- mti,malta-lcd
|
||||
- mti,sead3-lcd
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
offset:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description:
|
||||
Offset in bytes to the LCD registers within the system controller
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
oneOf:
|
||||
- required:
|
||||
- reg
|
||||
- required:
|
||||
- offset
|
||||
|
||||
if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: img,boston-lcd
|
||||
then:
|
||||
required:
|
||||
- reg
|
||||
else:
|
||||
required:
|
||||
- offset
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
lcd: lcd@17fff000 {
|
||||
compatible = "img,boston-lcd";
|
||||
reg = <0x17fff000 0x8>;
|
||||
};
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
Binding for ASCII LCD displays on Imagination Technologies boards
|
||||
|
||||
Required properties:
|
||||
- compatible : should be one of:
|
||||
"img,boston-lcd"
|
||||
"mti,malta-lcd"
|
||||
"mti,sead3-lcd"
|
||||
|
||||
Required properties for "img,boston-lcd":
|
||||
- reg : memory region locating the device registers
|
||||
|
||||
Required properties for "mti,malta-lcd" or "mti,sead3-lcd":
|
||||
- regmap: phandle of the system controller containing the LCD registers
|
||||
- offset: offset in bytes to the LCD registers within the system controller
|
||||
|
||||
The layout of the registers & properties of the display are determined
|
||||
from the compatible string, making this binding somewhat trivial.
|
||||
|
|
@ -79,9 +79,9 @@ a different secondary CPU release mechanism)
|
|||
linux,usable-memory-range
|
||||
-------------------------
|
||||
|
||||
This property (arm64 only) holds a base address and size, describing a
|
||||
limited region in which memory may be considered available for use by
|
||||
the kernel. Memory outside of this range is not available for use.
|
||||
This property holds a base address and size, describing a limited region in
|
||||
which memory may be considered available for use by the kernel. Memory outside
|
||||
of this range is not available for use.
|
||||
|
||||
This property describes a limitation: memory within this range is only
|
||||
valid when also described through another mechanism that the kernel
|
||||
|
|
@ -106,9 +106,9 @@ respectively, of the root node.
|
|||
linux,elfcorehdr
|
||||
----------------
|
||||
|
||||
This property (currently used only on arm64) holds the memory range,
|
||||
the address and the size, of the elf core header which mainly describes
|
||||
the panicked kernel's memory layout as PT_LOAD segments of elf format.
|
||||
This property holds the memory range, the address and the size, of the elf
|
||||
core header which mainly describes the panicked kernel's memory layout as
|
||||
PT_LOAD segments of elf format.
|
||||
e.g.
|
||||
|
||||
/ {
|
||||
|
|
|
|||
|
|
@ -1,26 +0,0 @@
|
|||
|
||||
* Samsung Exynos NoC (Network on Chip) Probe device
|
||||
|
||||
The Samsung Exynos542x SoC has NoC (Network on Chip) Probe for NoC bus.
|
||||
NoC provides the primitive values to get the performance data. The packets
|
||||
that the Network on Chip (NoC) probes detects are transported over
|
||||
the network infrastructure to observer units. You can configure probes to
|
||||
capture packets with header or data on the data request response network,
|
||||
or as traffic debug or statistic collectors. Exynos542x bus has multiple
|
||||
NoC probes to provide bandwidth information about behavior of the SoC
|
||||
that you can use while analyzing system performance.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "samsung,exynos5420-nocp"
|
||||
- reg: physical base address of each NoC Probe and length of memory mapped region.
|
||||
|
||||
Optional properties:
|
||||
- clock-names : the name of clock used by the NoC Probe, "nocp"
|
||||
- clocks : phandles for clock specified in "clock-names" property
|
||||
|
||||
Example : NoC Probe nodes in Device Tree are listed below.
|
||||
|
||||
nocp_mem0_0: nocp@10ca1000 {
|
||||
compatible = "samsung,exynos5420-nocp";
|
||||
reg = <0x10CA1000 0x200>;
|
||||
};
|
||||
|
|
@ -1,169 +0,0 @@
|
|||
|
||||
* Samsung Exynos PPMU (Platform Performance Monitoring Unit) device
|
||||
|
||||
The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
|
||||
each IP. PPMU provides the primitive values to get performance data. These
|
||||
PPMU events provide information of the SoC's behaviors so that you may
|
||||
use to analyze system performance, to make behaviors visible and to count
|
||||
usages of each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).
|
||||
The Exynos PPMU driver uses the devfreq-event class to provide event data
|
||||
to various devfreq devices. The devfreq devices would use the event data when
|
||||
derterming the current state of each IP.
|
||||
|
||||
Required properties for PPMU device:
|
||||
- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
|
||||
- reg: physical base address of each PPMU and length of memory mapped region.
|
||||
|
||||
Optional properties for PPMU device:
|
||||
- clock-names : the name of clock used by the PPMU, "ppmu"
|
||||
- clocks : phandles for clock specified in "clock-names" property
|
||||
|
||||
Required properties for 'events' child node of PPMU device:
|
||||
- event-name : the unique event name among PPMU device
|
||||
Optional properties for 'events' child node of PPMU device:
|
||||
- event-data-type : Define the type of data which shell be counted
|
||||
by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for
|
||||
all possible type, i.e. count read requests, count write data in bytes,
|
||||
etc. This field is optional and when it is missing, the driver code
|
||||
will use default data type.
|
||||
|
||||
Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
|
||||
|
||||
ppmu_dmc0: ppmu_dmc0@106a0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x106a0000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_dmc1: ppmu_dmc1@106b0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x106b0000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_cpu: ppmu_cpu@106c0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x106c0000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_rightbus: ppmu_rightbus@112a0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x112a0000 0x2000>;
|
||||
clocks = <&cmu CLK_PPMURIGHT>;
|
||||
clock-names = "ppmu";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_leftbus: ppmu_leftbus0@116a0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x116a0000 0x2000>;
|
||||
clocks = <&cmu CLK_PPMULEFT>;
|
||||
clock-names = "ppmu";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
|
||||
|
||||
&ppmu_dmc0 {
|
||||
status = "okay";
|
||||
|
||||
events {
|
||||
ppmu_dmc0_3: ppmu-event3-dmc0 {
|
||||
event-name = "ppmu-event3-dmc0";
|
||||
};
|
||||
|
||||
ppmu_dmc0_2: ppmu-event2-dmc0 {
|
||||
event-name = "ppmu-event2-dmc0";
|
||||
};
|
||||
|
||||
ppmu_dmc0_1: ppmu-event1-dmc0 {
|
||||
event-name = "ppmu-event1-dmc0";
|
||||
};
|
||||
|
||||
ppmu_dmc0_0: ppmu-event0-dmc0 {
|
||||
event-name = "ppmu-event0-dmc0";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ppmu_dmc1 {
|
||||
status = "okay";
|
||||
|
||||
events {
|
||||
ppmu_dmc1_3: ppmu-event3-dmc1 {
|
||||
event-name = "ppmu-event3-dmc1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ppmu_leftbus {
|
||||
status = "okay";
|
||||
|
||||
events {
|
||||
ppmu_leftbus_3: ppmu-event3-leftbus {
|
||||
event-name = "ppmu-event3-leftbus";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ppmu_rightbus {
|
||||
status = "okay";
|
||||
|
||||
events {
|
||||
ppmu_rightbus_3: ppmu-event3-rightbus {
|
||||
event-name = "ppmu-event3-rightbus";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
|
||||
|
||||
ppmu_d0_cpu: ppmu_d0_cpu@10480000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x10480000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_d0_general: ppmu_d0_general@10490000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x10490000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_d0_rt: ppmu_d0_rt@104a0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104a0000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_d1_cpu: ppmu_d1_cpu@104b0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104b0000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_d1_general: ppmu_d1_general@104c0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104c0000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ppmu_d1_rt: ppmu_d1_rt@104d0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104d0000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
Example4 : 'event-data-type' in exynos4412-ppmu-common.dtsi are listed below.
|
||||
|
||||
&ppmu_dmc0 {
|
||||
status = "okay";
|
||||
events {
|
||||
ppmu_dmc0_3: ppmu-event3-dmc0 {
|
||||
event-name = "ppmu-event3-dmc0";
|
||||
event-data-type = <(PPMU_RO_DATA_CNT |
|
||||
PPMU_WO_DATA_CNT)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-nocp.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Samsung Exynos NoC (Network on Chip) Probe
|
||||
|
||||
maintainers:
|
||||
- Chanwoo Choi <cw00.choi@samsung.com>
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
|
||||
description: |
|
||||
The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus.
|
||||
NoC provides the primitive values to get the performance data. The packets
|
||||
that the Network on Chip (NoC) probes detects are transported over the
|
||||
network infrastructure to observer units. You can configure probes to capture
|
||||
packets with header or data on the data request response network, or as
|
||||
traffic debug or statistic collectors. Exynos542x bus has multiple NoC probes
|
||||
to provide bandwidth information about behavior of the SoC that you can use
|
||||
while analyzing system performance.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: samsung,exynos5420-nocp
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: nocp
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
nocp_mem0_0: nocp@10ca1000 {
|
||||
compatible = "samsung,exynos5420-nocp";
|
||||
reg = <0x10ca1000 0x200>;
|
||||
};
|
||||
|
|
@ -0,0 +1,169 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/devfreq/event/samsung,exynos-ppmu.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit)
|
||||
|
||||
maintainers:
|
||||
- Chanwoo Choi <cw00.choi@samsung.com>
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
|
||||
description: |
|
||||
The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
|
||||
each IP. PPMU provides the primitive values to get performance data. These
|
||||
PPMU events provide information of the SoC's behaviors so that you may use to
|
||||
analyze system performance, to make behaviors visible and to count usages of
|
||||
each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC). The
|
||||
Exynos PPMU driver uses the devfreq-event class to provide event data to
|
||||
various devfreq devices. The devfreq devices would use the event data when
|
||||
derterming the current state of each IP.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- samsung,exynos-ppmu
|
||||
- samsung,exynos-ppmu-v2
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: ppmu
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
events:
|
||||
type: object
|
||||
|
||||
patternProperties:
|
||||
'^ppmu-event[0-9]+(-[a-z0-9]+){,2}$':
|
||||
type: object
|
||||
properties:
|
||||
event-name:
|
||||
description: |
|
||||
The unique event name among PPMU device
|
||||
$ref: /schemas/types.yaml#/definitions/string
|
||||
|
||||
event-data-type:
|
||||
description: |
|
||||
Define the type of data which shell be counted by the counter.
|
||||
You can check include/dt-bindings/pmu/exynos_ppmu.h for all
|
||||
possible type, i.e. count read requests, count write data in
|
||||
bytes, etc. This field is optional and when it is missing, the
|
||||
driver code will use default data type.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
|
||||
required:
|
||||
- event-name
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
// PPMUv1 nodes for Exynos3250 (although the board DTS defines events)
|
||||
#include <dt-bindings/clock/exynos3250.h>
|
||||
|
||||
ppmu_dmc0: ppmu@106a0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x106a0000 0x2000>;
|
||||
|
||||
events {
|
||||
ppmu_dmc0_3: ppmu-event3-dmc0 {
|
||||
event-name = "ppmu-event3-dmc0";
|
||||
};
|
||||
|
||||
ppmu_dmc0_2: ppmu-event2-dmc0 {
|
||||
event-name = "ppmu-event2-dmc0";
|
||||
};
|
||||
|
||||
ppmu_dmc0_1: ppmu-event1-dmc0 {
|
||||
event-name = "ppmu-event1-dmc0";
|
||||
};
|
||||
|
||||
ppmu_dmc0_0: ppmu-event0-dmc0 {
|
||||
event-name = "ppmu-event0-dmc0";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ppmu_rightbus: ppmu@112a0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x112a0000 0x2000>;
|
||||
clocks = <&cmu CLK_PPMURIGHT>;
|
||||
clock-names = "ppmu";
|
||||
|
||||
events {
|
||||
ppmu_rightbus_3: ppmu-event3-rightbus {
|
||||
event-name = "ppmu-event3-rightbus";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
- |
|
||||
// PPMUv2 nodes in Exynos5433
|
||||
ppmu_d0_cpu: ppmu@10480000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x10480000 0x2000>;
|
||||
};
|
||||
|
||||
ppmu_d0_general: ppmu@10490000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x10490000 0x2000>;
|
||||
|
||||
events {
|
||||
ppmu_event0_d0_general: ppmu-event0-d0-general {
|
||||
event-name = "ppmu-event0-d0-general";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ppmu_d0_rt: ppmu@104a0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104a0000 0x2000>;
|
||||
};
|
||||
|
||||
ppmu_d1_cpu: ppmu@104b0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104b0000 0x2000>;
|
||||
};
|
||||
|
||||
ppmu_d1_general: ppmu@104c0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104c0000 0x2000>;
|
||||
};
|
||||
|
||||
ppmu_d1_rt: ppmu@104d0000 {
|
||||
compatible = "samsung,exynos-ppmu-v2";
|
||||
reg = <0x104d0000 0x2000>;
|
||||
};
|
||||
|
||||
- |
|
||||
// PPMUv1 nodes with event-data-type for Exynos4412
|
||||
#include <dt-bindings/pmu/exynos_ppmu.h>
|
||||
|
||||
ppmu@106a0000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x106a0000 0x2000>;
|
||||
clocks = <&clock 400>;
|
||||
clock-names = "ppmu";
|
||||
|
||||
events {
|
||||
ppmu-event3-dmc0 {
|
||||
event-name = "ppmu-event3-dmc0";
|
||||
event-data-type = <(PPMU_RO_DATA_CNT |
|
||||
PPMU_WO_DATA_CNT)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -174,7 +174,6 @@ examples:
|
|||
phy-names = "phy";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_pins>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
|
|
@ -233,7 +232,6 @@ examples:
|
|||
phy-names = "phy";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_pins>;
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -37,7 +37,8 @@ properties:
|
|||
|
||||
properties:
|
||||
port@0:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
$ref: /schemas/graph.yaml#/$defs/port-base
|
||||
unevaluatedProperties: false
|
||||
description: Video port for MIPI DSI Channel-A input
|
||||
|
||||
properties:
|
||||
|
|
@ -57,7 +58,8 @@ properties:
|
|||
- const: 4
|
||||
|
||||
port@1:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
$ref: /schemas/graph.yaml#/$defs/port-base
|
||||
unevaluatedProperties: false
|
||||
description: Video port for MIPI DSI Channel-B input
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -27,6 +27,7 @@ properties:
|
|||
- fsl,imx6ul-lcdif
|
||||
- fsl,imx7d-lcdif
|
||||
- fsl,imx8mm-lcdif
|
||||
- fsl,imx8mn-lcdif
|
||||
- fsl,imx8mq-lcdif
|
||||
- const: fsl,imx6sx-lcdif
|
||||
|
||||
|
|
|
|||
|
|
@ -89,7 +89,8 @@ properties:
|
|||
|
||||
properties:
|
||||
port@0:
|
||||
$ref: "/schemas/graph.yaml#/properties/port"
|
||||
$ref: "/schemas/graph.yaml#/$defs/port-base"
|
||||
unevaluatedProperties: false
|
||||
description: |
|
||||
Input endpoints of the controller.
|
||||
properties:
|
||||
|
|
@ -104,7 +105,8 @@ properties:
|
|||
enum: [ 0, 1, 2, 3 ]
|
||||
|
||||
port@1:
|
||||
$ref: "/schemas/graph.yaml#/properties/port"
|
||||
$ref: "/schemas/graph.yaml#/$defs/port-base"
|
||||
unevaluatedProperties: false
|
||||
description: |
|
||||
Output endpoints of the controller.
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ allOf:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: qcom,dsi-phy-10nm
|
||||
- const: qcom,dsi-phy-10nm-8998
|
||||
enum:
|
||||
- qcom,dsi-phy-10nm
|
||||
- qcom,dsi-phy-10nm-8998
|
||||
|
||||
reg:
|
||||
items:
|
||||
|
|
|
|||
|
|
@ -14,9 +14,9 @@ allOf:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: qcom,dsi-phy-14nm
|
||||
- const: qcom,dsi-phy-14nm-660
|
||||
enum:
|
||||
- qcom,dsi-phy-14nm
|
||||
- qcom,dsi-phy-14nm-660
|
||||
|
||||
reg:
|
||||
items:
|
||||
|
|
|
|||
|
|
@ -14,8 +14,7 @@ allOf:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: qcom,dsi-phy-20nm
|
||||
const: qcom,dsi-phy-20nm
|
||||
|
||||
reg:
|
||||
items:
|
||||
|
|
|
|||
|
|
@ -14,10 +14,10 @@ allOf:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: qcom,dsi-phy-28nm-hpm
|
||||
- const: qcom,dsi-phy-28nm-lp
|
||||
- const: qcom,dsi-phy-28nm-8960
|
||||
enum:
|
||||
- qcom,dsi-phy-28nm-hpm
|
||||
- qcom,dsi-phy-28nm-lp
|
||||
- qcom,dsi-phy-28nm-8960
|
||||
|
||||
reg:
|
||||
items:
|
||||
|
|
|
|||
|
|
@ -70,7 +70,6 @@ examples:
|
|||
avee-supply = <&ppvarp_lcd>;
|
||||
pp1800-supply = <&pp1800_lcd>;
|
||||
backlight = <&backlight_lcd0>;
|
||||
status = "okay";
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&dsi_out>;
|
||||
|
|
|
|||
|
|
@ -1,120 +0,0 @@
|
|||
ZTE VOU Display Controller
|
||||
|
||||
This is a display controller found on ZTE ZX296718 SoC. It includes multiple
|
||||
Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks
|
||||
handling scaling, color space conversion etc. VOU also integrates the support
|
||||
for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD.
|
||||
|
||||
* Master VOU node
|
||||
|
||||
It must be the parent node of all the sub-device nodes.
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "zte,zx296718-vou"
|
||||
- #address-cells: should be <1>
|
||||
- #size-cells: should be <1>
|
||||
- ranges: list of address translations between VOU and sub-devices
|
||||
|
||||
* VOU DPC device
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "zte,zx296718-dpc"
|
||||
- reg: Physical base address and length of DPC register regions, one for each
|
||||
entry in 'reg-names'
|
||||
- reg-names: The names of register regions. The following regions are required:
|
||||
"osd"
|
||||
"timing_ctrl"
|
||||
"dtrc"
|
||||
"vou_ctrl"
|
||||
"otfppu"
|
||||
- interrupts: VOU DPC interrupt number to CPU
|
||||
- clocks: A list of phandle + clock-specifier pairs, one for each entry
|
||||
in 'clock-names'
|
||||
- clock-names: A list of clock names. The following clocks are required:
|
||||
"aclk"
|
||||
"ppu_wclk"
|
||||
"main_wclk"
|
||||
"aux_wclk"
|
||||
|
||||
* HDMI output device
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "zte,zx296718-hdmi"
|
||||
- reg: Physical base address and length of the HDMI device IO region
|
||||
- interrupts : HDMI interrupt number to CPU
|
||||
- clocks: A list of phandle + clock-specifier pairs, one for each entry
|
||||
in 'clock-names'
|
||||
- clock-names: A list of clock names. The following clocks are required:
|
||||
"osc_cec"
|
||||
"osc_clk"
|
||||
"xclk"
|
||||
|
||||
* TV Encoder output device
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "zte,zx296718-tvenc"
|
||||
- reg: Physical base address and length of the TVENC device IO region
|
||||
- zte,tvenc-power-control: the phandle to SYSCTRL block followed by two
|
||||
integer cells. The first cell is the offset of SYSCTRL register used
|
||||
to control TV Encoder DAC power, and the second cell is the bit mask.
|
||||
|
||||
* VGA output device
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "zte,zx296718-vga"
|
||||
- reg: Physical base address and length of the VGA device IO region
|
||||
- interrupts : VGA interrupt number to CPU
|
||||
- clocks: Phandle with clock-specifier pointing to VGA I2C clock.
|
||||
- clock-names: Must be "i2c_wclk".
|
||||
- zte,vga-power-control: the phandle to SYSCTRL block followed by two
|
||||
integer cells. The first cell is the offset of SYSCTRL register used
|
||||
to control VGA DAC power, and the second cell is the bit mask.
|
||||
|
||||
Example:
|
||||
|
||||
vou: vou@1440000 {
|
||||
compatible = "zte,zx296718-vou";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x1440000 0x10000>;
|
||||
|
||||
dpc: dpc@0 {
|
||||
compatible = "zte,zx296718-dpc";
|
||||
reg = <0x0000 0x1000>, <0x1000 0x1000>,
|
||||
<0x5000 0x1000>, <0x6000 0x1000>,
|
||||
<0xa000 0x1000>;
|
||||
reg-names = "osd", "timing_ctrl",
|
||||
"dtrc", "vou_ctrl",
|
||||
"otfppu";
|
||||
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>,
|
||||
<&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>;
|
||||
clock-names = "aclk", "ppu_wclk",
|
||||
"main_wclk", "aux_wclk";
|
||||
};
|
||||
|
||||
vga: vga@8000 {
|
||||
compatible = "zte,zx296718-vga";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&topcrm VGA_I2C_WCLK>;
|
||||
clock-names = "i2c_wclk";
|
||||
zte,vga-power-control = <&sysctrl 0x170 0xe0>;
|
||||
};
|
||||
|
||||
hdmi: hdmi@c000 {
|
||||
compatible = "zte,zx296718-hdmi";
|
||||
reg = <0xc000 0x4000>;
|
||||
interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>;
|
||||
clocks = <&topcrm HDMI_OSC_CEC>,
|
||||
<&topcrm HDMI_OSC_CLK>,
|
||||
<&topcrm HDMI_XCLK>;
|
||||
clock-names = "osc_cec", "osc_clk", "xclk";
|
||||
};
|
||||
|
||||
tvenc: tvenc@2000 {
|
||||
compatible = "zte,zx296718-tvenc";
|
||||
reg = <0x2000 0x1000>;
|
||||
zte,tvenc-power-control = <&sysctrl 0x170 0x10>;
|
||||
};
|
||||
};
|
||||
|
|
@ -19,12 +19,12 @@ properties:
|
|||
description: The cell is the request line number.
|
||||
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: allwinner,sun6i-a31-dma
|
||||
- const: allwinner,sun8i-a23-dma
|
||||
- const: allwinner,sun8i-a83t-dma
|
||||
- const: allwinner,sun8i-h3-dma
|
||||
- const: allwinner,sun8i-v3s-dma
|
||||
enum:
|
||||
- allwinner,sun6i-a31-dma
|
||||
- allwinner,sun8i-a23-dma
|
||||
- allwinner,sun8i-a83t-dma
|
||||
- allwinner,sun8i-h3-dma
|
||||
- allwinner,sun8i-v3s-dma
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -131,9 +131,9 @@ properties:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: arm,scpi-dvfs-clocks
|
||||
- const: arm,scpi-variable-clocks
|
||||
enum:
|
||||
- arm,scpi-dvfs-clocks
|
||||
- arm,scpi-variable-clocks
|
||||
|
||||
'#clock-cells':
|
||||
const: 1
|
||||
|
|
|
|||
|
|
@ -1,25 +0,0 @@
|
|||
Devicetree bindings for Zynq Ultrascale MPSoC FPGA Manager.
|
||||
The ZynqMP SoC uses the PCAP (Processor configuration Port) to configure the
|
||||
Programmable Logic (PL). The configuration uses the firmware interface.
|
||||
|
||||
Required properties:
|
||||
- compatible: should contain "xlnx,zynqmp-pcap-fpga"
|
||||
|
||||
Example for full FPGA configuration:
|
||||
|
||||
fpga-region0 {
|
||||
compatible = "fpga-region";
|
||||
fpga-mgr = <&zynqmp_pcap>;
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x1>;
|
||||
};
|
||||
|
||||
firmware {
|
||||
zynqmp_firmware: zynqmp-firmware {
|
||||
compatible = "xlnx,zynqmp-firmware";
|
||||
method = "smc";
|
||||
zynqmp_pcap: pcap {
|
||||
compatible = "xlnx,zynqmp-pcap-fpga";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Xilinx Zynq Ultrascale MPSoC FPGA Manager Device Tree Bindings
|
||||
|
||||
maintainers:
|
||||
- Nava kishore Manne <navam@xilinx.com>
|
||||
|
||||
description: |
|
||||
Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
|
||||
The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
|
||||
configure the Programmable Logic (PL). The configuration uses the
|
||||
firmware interface.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: xlnx,zynqmp-pcap-fpga
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
firmware {
|
||||
zynqmp_firmware: zynqmp-firmware {
|
||||
zynqmp_pcap: pcap {
|
||||
compatible = "xlnx,zynqmp-pcap-fpga";
|
||||
};
|
||||
};
|
||||
};
|
||||
...
|
||||
|
|
@ -20,6 +20,7 @@ properties:
|
|||
- mediatek,mt8183-mali
|
||||
- realtek,rtd1619-mali
|
||||
- rockchip,px30-mali
|
||||
- rockchip,rk3568-mali
|
||||
- const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -1,12 +0,0 @@
|
|||
Bindings for MAX1619 Temperature Sensor
|
||||
|
||||
Required properties:
|
||||
- compatible : "maxim,max1619"
|
||||
- reg : I2C address, one of 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, or
|
||||
0x4d, 0x4e
|
||||
|
||||
Example:
|
||||
temp@4c {
|
||||
compatible = "maxim,max1619";
|
||||
reg = <0x4c>;
|
||||
};
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
Broadcom iProc I2C controller
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible:
|
||||
Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
|
||||
|
||||
- reg:
|
||||
Define the base and range of the I/O address space that contain the iProc
|
||||
I2C controller registers
|
||||
|
||||
- clock-frequency:
|
||||
This is the I2C bus clock. Need to be either 100000 or 400000
|
||||
|
||||
- #address-cells:
|
||||
Always 1 (for I2C addresses)
|
||||
|
||||
- #size-cells:
|
||||
Always 0
|
||||
|
||||
Optional properties:
|
||||
|
||||
- interrupts:
|
||||
Should contain the I2C interrupt. For certain revisions of the I2C
|
||||
controller, I2C interrupt is unwired to the interrupt controller. In such
|
||||
case, this property should be left unspecified, and driver will fall back
|
||||
to polling mode
|
||||
|
||||
- brcm,ape-hsls-addr-mask:
|
||||
Required for "brcm,iproc-nic-i2c". Host view of address mask into the
|
||||
'APE' co-processor. Value must be unsigned, 32-bit
|
||||
|
||||
Example:
|
||||
i2c0: i2c@18008000 {
|
||||
compatible = "brcm,iproc-i2c";
|
||||
reg = <0x18008000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
codec: wm8750@1a {
|
||||
compatible = "wlf,wm8750";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
71
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
Normal file
71
Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
Normal file
|
|
@ -0,0 +1,71 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/i2c/brcm,iproc-i2c.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Broadcom iProc I2C controller
|
||||
|
||||
maintainers:
|
||||
- Rafał Miłecki <rafal@milecki.pl>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- brcm,iproc-i2c
|
||||
- brcm,iproc-nic-i2c
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clock-frequency:
|
||||
enum: [ 100000, 400000 ]
|
||||
|
||||
interrupts:
|
||||
description: |
|
||||
Should contain the I2C interrupt. For certain revisions of the I2C
|
||||
controller, I2C interrupt is unwired to the interrupt controller. In such
|
||||
case, this property should be left unspecified, and driver will fall back
|
||||
to polling mode
|
||||
maxItems: 1
|
||||
|
||||
brcm,ape-hsls-addr-mask:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: Host view of address mask into the 'APE' co-processor
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/i2c/i2c-controller.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: brcm,iproc-nic-i2c
|
||||
then:
|
||||
required:
|
||||
- brcm,ape-hsls-addr-mask
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- reg
|
||||
- clock-frequency
|
||||
- '#address-cells'
|
||||
- '#size-cells'
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
i2c@18008000 {
|
||||
compatible = "brcm,iproc-i2c";
|
||||
reg = <0x18008000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
wm8750@1a {
|
||||
compatible = "wlf,wm8750";
|
||||
reg = <0x1a>;
|
||||
};
|
||||
};
|
||||
|
|
@ -72,11 +72,11 @@ additionalProperties: false
|
|||
if:
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: ti,omap2420-i2c
|
||||
- const: ti,omap2430-i2c
|
||||
- const: ti,omap3-i2c
|
||||
- const: ti,omap4-i2c
|
||||
enum:
|
||||
- ti,omap2420-i2c
|
||||
- ti,omap2430-i2c
|
||||
- ti,omap3-i2c
|
||||
- ti,omap4-i2c
|
||||
|
||||
then:
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -19,10 +19,10 @@ allOf:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: loongson,liointc-1.0
|
||||
- const: loongson,liointc-1.0a
|
||||
- const: loongson,liointc-2.0
|
||||
enum:
|
||||
- loongson,liointc-1.0
|
||||
- loongson,liointc-1.0a
|
||||
- loongson,liointc-2.0
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
|
|
|
|||
|
|
@ -1,50 +0,0 @@
|
|||
* Samsung Exynos Interrupt Combiner Controller
|
||||
|
||||
Samsung's Exynos4 architecture includes a interrupt combiner controller which
|
||||
can combine interrupt sources as a group and provide a single interrupt request
|
||||
for the group. The interrupt request from each group are connected to a parent
|
||||
interrupt controller, such as GIC in case of Exynos4210.
|
||||
|
||||
The interrupt combiner controller consists of multiple combiners. Up to eight
|
||||
interrupt sources can be connected to a combiner. The combiner outputs one
|
||||
combined interrupt for its eight interrupt sources. The combined interrupt
|
||||
is usually connected to a parent interrupt controller.
|
||||
|
||||
A single node in the device tree is used to describe the interrupt combiner
|
||||
controller module (which includes multiple combiners). A combiner in the
|
||||
interrupt controller module shares config/control registers with other
|
||||
combiners. For example, a 32-bit interrupt enable/disable config register
|
||||
can accommodate up to 4 interrupt combiners (with each combiner supporting
|
||||
up to 8 interrupt sources).
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "samsung,exynos4210-combiner".
|
||||
- interrupt-controller: Identifies the node as an interrupt controller.
|
||||
- #interrupt-cells: should be <2>. The meaning of the cells are
|
||||
* First Cell: Combiner Group Number.
|
||||
* Second Cell: Interrupt number within the group.
|
||||
- reg: Base address and size of interrupt combiner registers.
|
||||
- interrupts: The list of interrupts generated by the combiners which are then
|
||||
connected to a parent interrupt controller. The format of the interrupt
|
||||
specifier depends in the interrupt parent controller.
|
||||
|
||||
Optional properties:
|
||||
- samsung,combiner-nr: The number of interrupt combiners supported. If this
|
||||
property is not specified, the default number of combiners is assumed
|
||||
to be 16.
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
The following is a an example from the Exynos4210 SoC dtsi file.
|
||||
|
||||
combiner:interrupt-controller@10440000 {
|
||||
compatible = "samsung,exynos4210-combiner";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x10440000 0x1000>;
|
||||
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
|
||||
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
|
||||
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
|
||||
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,96 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/samsung,exynos4210-combiner.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Samsung Exynos SoC Interrupt Combiner Controller
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
|
||||
description: |
|
||||
Samsung's Exynos4 architecture includes a interrupt combiner controller which
|
||||
can combine interrupt sources as a group and provide a single interrupt
|
||||
request for the group. The interrupt request from each group are connected to
|
||||
a parent interrupt controller, such as GIC in case of Exynos4210.
|
||||
|
||||
The interrupt combiner controller consists of multiple combiners. Up to eight
|
||||
interrupt sources can be connected to a combiner. The combiner outputs one
|
||||
combined interrupt for its eight interrupt sources. The combined interrupt is
|
||||
usually connected to a parent interrupt controller.
|
||||
|
||||
A single node in the device tree is used to describe the interrupt combiner
|
||||
controller module (which includes multiple combiners). A combiner in the
|
||||
interrupt controller module shares config/control registers with other
|
||||
combiners. For example, a 32-bit interrupt enable/disable config register can
|
||||
accommodate up to 4 interrupt combiners (with each combiner supporting up to
|
||||
8 interrupt sources).
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/interrupt-controller.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: samsung,exynos4210-combiner
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
interrupts:
|
||||
minItems: 8
|
||||
maxItems: 32
|
||||
|
||||
"#interrupt-cells":
|
||||
description: |
|
||||
The meaning of the cells are:
|
||||
* First Cell: Combiner Group Number.
|
||||
* Second Cell: Interrupt number within the group.
|
||||
const: 2
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
samsung,combiner-nr:
|
||||
description: |
|
||||
The number of interrupt combiners supported. Should match number
|
||||
of interrupts set in "interrupts" property.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
minimum: 8
|
||||
maximum: 32
|
||||
default: 16
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- interrupt-controller
|
||||
- interrupts
|
||||
- "#interrupt-cells"
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
interrupt-controller@10440000 {
|
||||
compatible = "samsung,exynos4210-combiner";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
reg = <0x10440000 0x1000>;
|
||||
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
|
@ -46,7 +46,7 @@ properties:
|
|||
AM437x family of SoCs,
|
||||
AM57xx family of SoCs
|
||||
66AK2G family of SoCs
|
||||
Use "ti,icssg-intc" for K3 AM65x & J721E family of SoCs
|
||||
Use "ti,icssg-intc" for K3 AM65x, J721E and AM64x family of SoCs
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
@ -95,6 +95,8 @@ properties:
|
|||
- AM65x and J721E SoCs have "host_intr5", "host_intr6" and
|
||||
"host_intr7" interrupts connected to MPU, and other ICSSG
|
||||
instances.
|
||||
- AM64x SoCs have all the 8 host interrupts connected to various
|
||||
other SoC entities
|
||||
|
||||
required:
|
||||
- compatible
|
||||
|
|
|
|||
|
|
@ -44,7 +44,8 @@ properties:
|
|||
const: isc-mck
|
||||
|
||||
port:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
$ref: /schemas/graph.yaml#/$defs/port-base
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
Input port node, single endpoint describing the input pad.
|
||||
|
||||
|
|
|
|||
|
|
@ -83,10 +83,10 @@ properties:
|
|||
link-frequencies: true
|
||||
data-lanes: true
|
||||
bus-type:
|
||||
oneOf:
|
||||
- const: 1 # CSI-2 C-PHY
|
||||
- const: 3 # CCP2
|
||||
- const: 4 # CSI-2 D-PHY
|
||||
enum:
|
||||
- 1 # CSI-2 C-PHY
|
||||
- 3 # CCP2
|
||||
- 4 # CSI-2 D-PHY
|
||||
|
||||
required:
|
||||
- link-frequencies
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@ properties:
|
|||
of the data and clock lines.
|
||||
|
||||
port:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
$ref: /schemas/graph.yaml#/$defs/port-base
|
||||
description:
|
||||
Input port node, single endpoint describing the input pad.
|
||||
|
||||
|
|
|
|||
|
|
@ -200,8 +200,6 @@ examples:
|
|||
clock-names = "pclk", "wrap", "phy", "axi";
|
||||
power-domains = <&mipi_pd>;
|
||||
|
||||
status = "disabled";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -96,7 +96,7 @@ properties:
|
|||
Indicates that the channel acts as primary among the bonded channels.
|
||||
|
||||
port:
|
||||
$ref: /schemas/graph.yaml#/properties/port
|
||||
$ref: /schemas/graph.yaml#/$defs/port-base
|
||||
unevaluatedProperties: false
|
||||
description:
|
||||
Child port node corresponding to the data input. The port node must
|
||||
|
|
@ -242,7 +242,6 @@ examples:
|
|||
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
||||
resets = <&cpg 513>;
|
||||
renesas,bonding = <&drif11>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
drif11: rif@e6f70000 {
|
||||
|
|
|
|||
|
|
@ -1,35 +0,0 @@
|
|||
Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller
|
||||
|
||||
The DDR controller of the AR7xxx and AR9xxx families provides an interface
|
||||
to flush the FIFO between various devices and the DDR. This is mainly used
|
||||
by the IRQ controller to flush the FIFO before running the interrupt handler
|
||||
of such devices.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: has to be "qca,<soc-type>-ddr-controller",
|
||||
"qca,[ar7100|ar7240]-ddr-controller" as fallback.
|
||||
On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
|
||||
fallback, otherwise "qca,ar7240-ddr-controller" should be used.
|
||||
- reg: Base address and size of the controller's memory area
|
||||
- #qca,ddr-wb-channel-cells: Specifies the number of cells needed to encode
|
||||
the write buffer channel index, should be 1.
|
||||
|
||||
Example:
|
||||
|
||||
ddr_ctrl: memory-controller@18000000 {
|
||||
compatible = "qca,ar9132-ddr-controller",
|
||||
"qca,ar7240-ddr-controller";
|
||||
reg = <0x18000000 0x100>;
|
||||
|
||||
#qca,ddr-wb-channel-cells = <1>;
|
||||
};
|
||||
|
||||
...
|
||||
|
||||
interrupt-controller {
|
||||
...
|
||||
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
|
||||
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
|
||||
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
|
||||
};
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
DDR PHY Front End (DPFE) for Broadcom STB
|
||||
=========================================
|
||||
|
||||
DPFE and the DPFE firmware provide an interface for the host CPU to
|
||||
communicate with the DCPU, which resides inside the DDR PHY.
|
||||
|
||||
There are three memory regions for interacting with the DCPU. These are
|
||||
specified in a single reg property.
|
||||
|
||||
Required properties:
|
||||
- compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu"
|
||||
or "brcm,dpfe-cpu"
|
||||
- reg: must reference three register ranges
|
||||
- start address and length of the DCPU register space
|
||||
- start address and length of the DCPU data memory space
|
||||
- start address and length of the DCPU instruction memory space
|
||||
- reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem";
|
||||
they must be in the same order as the register declarations
|
||||
|
||||
Example:
|
||||
dpfe_cpu0: dpfe-cpu@f1132000 {
|
||||
compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
|
||||
reg = <0xf1132000 0x180
|
||||
0xf1134000 0x1000
|
||||
0xf1138000 0x4000>;
|
||||
reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
|
||||
};
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/brcm,dpfe-cpu.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: DDR PHY Front End (DPFE) for Broadcom STB
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
- Markus Mayer <mmayer@broadcom.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- brcm,bcm7271-dpfe-cpu
|
||||
- brcm,bcm7268-dpfe-cpu
|
||||
- const: brcm,dpfe-cpu
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: DCPU register space
|
||||
- description: DCPU data memory space
|
||||
- description: DCPU instruction memory space
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: dpfe-cpu
|
||||
- const: dpfe-dmem
|
||||
- const: dpfe-imem
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
dpfe-cpu@f1132000 {
|
||||
compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu";
|
||||
reg = <0xf1132000 0x180>,
|
||||
<0xf1134000 0x1000>,
|
||||
<0xf1138000 0x4000>;
|
||||
reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem";
|
||||
};
|
||||
|
|
@ -1,84 +0,0 @@
|
|||
* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device
|
||||
|
||||
The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM
|
||||
memory chips are connected. The driver is to monitor the controller in runtime
|
||||
and switch frequency and voltage. To monitor the usage of the controller in
|
||||
runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which
|
||||
is able to measure the current load of the memory.
|
||||
When 'userspace' governor is used for the driver, an application is able to
|
||||
switch the DMC and memory frequency.
|
||||
|
||||
Required properties for DMC device for Exynos5422:
|
||||
- compatible: Should be "samsung,exynos5422-dmc".
|
||||
- clocks : list of clock specifiers, must contain an entry for each
|
||||
required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL,
|
||||
CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL,
|
||||
CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX,
|
||||
- clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2",
|
||||
"fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore",
|
||||
"mout_mclk_cdrex" entries
|
||||
- devfreq-events : phandles for PPMU devices connected to this DMC.
|
||||
- vdd-supply : phandle for voltage regulator which is connected.
|
||||
- reg : registers of two CDREX controllers.
|
||||
- operating-points-v2 : phandle for OPPs described in v2 definition.
|
||||
- device-handle : phandle of the connected DRAM memory device. For more
|
||||
information please refer to documentation file:
|
||||
Documentation/devicetree/bindings/ddr/lpddr3.txt
|
||||
- devfreq-events : phandles of the PPMU events used by the controller.
|
||||
- samsung,syscon-clk : phandle of the clock register set used by the controller,
|
||||
these registers are used for enabling a 'pause' feature and are not
|
||||
exposed by clock framework but they must be used in a safe way.
|
||||
The register offsets are in the driver code and specyfic for this SoC
|
||||
type.
|
||||
|
||||
Optional properties for DMC device for Exynos5422:
|
||||
- interrupt-parent : The parent interrupt controller.
|
||||
- interrupts : Contains the IRQ line numbers for the DMC internal performance
|
||||
event counters in DREX0 and DREX1 channels. Align with specification of the
|
||||
interrupt line(s) in the interrupt-parent controller.
|
||||
- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the
|
||||
same as in the 'interrupts' list above.
|
||||
|
||||
Example:
|
||||
|
||||
ppmu_dmc0_0: ppmu@10d00000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x10d00000 0x2000>;
|
||||
clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
|
||||
clock-names = "ppmu";
|
||||
events {
|
||||
ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
|
||||
event-name = "ppmu-event3-dmc0_0";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dmc: memory-controller@10c20000 {
|
||||
compatible = "samsung,exynos5422-dmc";
|
||||
reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
|
||||
clocks = <&clock CLK_FOUT_SPLL>,
|
||||
<&clock CLK_MOUT_SCLK_SPLL>,
|
||||
<&clock CLK_FF_DOUT_SPLL2>,
|
||||
<&clock CLK_FOUT_BPLL>,
|
||||
<&clock CLK_MOUT_BPLL>,
|
||||
<&clock CLK_SCLK_BPLL>,
|
||||
<&clock CLK_MOUT_MX_MSPLL_CCORE>,
|
||||
<&clock CLK_MOUT_MCLK_CDREX>;
|
||||
clock-names = "fout_spll",
|
||||
"mout_sclk_spll",
|
||||
"ff_dout_spll2",
|
||||
"fout_bpll",
|
||||
"mout_bpll",
|
||||
"sclk_bpll",
|
||||
"mout_mx_mspll_ccore",
|
||||
"mout_mclk_cdrex";
|
||||
operating-points-v2 = <&dmc_opp_table>;
|
||||
devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
|
||||
<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
|
||||
device-handle = <&samsung_K3QF2F20DB>;
|
||||
vdd-supply = <&buck1_reg>;
|
||||
samsung,syscon-clk = <&clock>;
|
||||
interrupt-parent = <&combiner>;
|
||||
interrupts = <16 0>, <16 1>;
|
||||
interrupt-names = "drex_0", "drex_1";
|
||||
};
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/marvell,mvebu-sdram-controller.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Marvell MVEBU SDRAM controller
|
||||
|
||||
maintainers:
|
||||
- Jan Luebbe <jlu@pengutronix.de>
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: marvell,armada-xp-sdram-controller
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
memory-controller@1400 {
|
||||
compatible = "marvell,armada-xp-sdram-controller";
|
||||
reg = <0x1400 0x500>;
|
||||
};
|
||||
|
|
@ -1,21 +0,0 @@
|
|||
Device Tree bindings for MVEBU SDRAM controllers
|
||||
|
||||
The Marvell EBU SoCs all have a SDRAM controller. The SDRAM controller
|
||||
differs from one SoC variant to another, but they also share a number
|
||||
of commonalities.
|
||||
|
||||
For now, this Device Tree binding documentation only documents the
|
||||
Armada XP SDRAM controller.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: for Armada XP, "marvell,armada-xp-sdram-controller"
|
||||
- reg: a resource specifier for the register space, which should
|
||||
include all SDRAM controller registers as per the datasheet.
|
||||
|
||||
Example:
|
||||
|
||||
sdramc@1400 {
|
||||
compatible = "marvell,armada-xp-sdram-controller";
|
||||
reg = <0x1400 0x500>;
|
||||
};
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/qca,ath79-ddr-controller.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
|
||||
description: |
|
||||
The DDR controller of the AR7xxx and AR9xxx families provides an interface to
|
||||
flush the FIFO between various devices and the DDR. This is mainly used by
|
||||
the IRQ controller to flush the FIFO before running the interrupt handler of
|
||||
such devices.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- items:
|
||||
- const: qca,ar9132-ddr-controller
|
||||
- const: qca,ar7240-ddr-controller
|
||||
- items:
|
||||
- enum:
|
||||
- qca,ar7100-ddr-controller
|
||||
- qca,ar7240-ddr-controller
|
||||
|
||||
"#qca,ddr-wb-channel-cells":
|
||||
description: |
|
||||
Specifies the number of cells needed to encode the write buffer channel
|
||||
index.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
const: 1
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- "#qca,ddr-wb-channel-cells"
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
ddr_ctrl: memory-controller@18000000 {
|
||||
compatible = "qca,ar9132-ddr-controller",
|
||||
"qca,ar7240-ddr-controller";
|
||||
reg = <0x18000000 0x100>;
|
||||
|
||||
#qca,ddr-wb-channel-cells = <1>;
|
||||
};
|
||||
|
||||
interrupt-controller {
|
||||
// ...
|
||||
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
|
||||
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
|
||||
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
|
||||
};
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
* H8/300 bus controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be "renesas,h8300-bsc".
|
||||
- reg: Base address and length of BSC registers.
|
||||
|
||||
Example.
|
||||
bsc: memory-controller@fee01e {
|
||||
compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
|
||||
reg = <0xfee01e 8>;
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: H8/300 bus controller
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
- Yoshinori Sato <ysato@users.sourceforge.jp>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- enum:
|
||||
- renesas,h8300h-bsc
|
||||
- renesas,h8s-bsc
|
||||
- const: renesas,h8300-bsc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
memory-controller@fee01e {
|
||||
compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
|
||||
reg = <0xfee01e 8>;
|
||||
};
|
||||
|
|
@ -61,12 +61,23 @@ patternProperties:
|
|||
type: object
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- cfi-flash
|
||||
- jedec,spi-nor
|
||||
contains:
|
||||
enum:
|
||||
- cfi-flash
|
||||
- jedec,spi-nor
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- clocks
|
||||
- power-domains
|
||||
- resets
|
||||
- '#address-cells'
|
||||
- '#size-cells'
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/renesas-cpg-mssr.h>
|
||||
|
|
|
|||
|
|
@ -0,0 +1,137 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos5422-dmc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: |
|
||||
Samsung Exynos5422 SoC frequency and voltage scaling for Dynamic Memory
|
||||
Controller device
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
- Lukasz Luba <lukasz.luba@arm.com>
|
||||
|
||||
description: |
|
||||
The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the
|
||||
DRAM memory chips are connected. The driver is to monitor the controller in
|
||||
runtime and switch frequency and voltage. To monitor the usage of the
|
||||
controller in runtime, the driver uses the PPMU (Platform Performance
|
||||
Monitoring Unit), which is able to measure the current load of the memory.
|
||||
When 'userspace' governor is used for the driver, an application is able to
|
||||
switch the DMC and memory frequency.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: samsung,exynos5422-dmc
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: fout_spll
|
||||
- const: mout_sclk_spll
|
||||
- const: ff_dout_spll2
|
||||
- const: fout_bpll
|
||||
- const: mout_bpll
|
||||
- const: sclk_bpll
|
||||
- const: mout_mx_mspll_ccore
|
||||
- const: mout_mclk_cdrex
|
||||
|
||||
clocks:
|
||||
minItems: 8
|
||||
maxItems: 8
|
||||
|
||||
devfreq-events:
|
||||
$ref: '/schemas/types.yaml#/definitions/phandle-array'
|
||||
minItems: 1
|
||||
maxItems: 16
|
||||
description: phandles of the PPMU events used by the controller.
|
||||
|
||||
device-handle:
|
||||
$ref: '/schemas/types.yaml#/definitions/phandle'
|
||||
description: |
|
||||
phandle of the connected DRAM memory device. For more information please
|
||||
refer to documentation file: Documentation/devicetree/bindings/ddr/lpddr3.txt
|
||||
|
||||
operating-points-v2: true
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: DMC internal performance event counters in DREX0
|
||||
- description: DMC internal performance event counters in DREX1
|
||||
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: drex_0
|
||||
- const: drex_1
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: registers of DREX0
|
||||
- description: registers of DREX1
|
||||
|
||||
samsung,syscon-clk:
|
||||
$ref: '/schemas/types.yaml#/definitions/phandle'
|
||||
description: |
|
||||
Phandle of the clock register set used by the controller, these registers
|
||||
are used for enabling a 'pause' feature and are not exposed by clock
|
||||
framework but they must be used in a safe way. The register offsets are
|
||||
in the driver code and specyfic for this SoC type.
|
||||
|
||||
vdd-supply: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- clock-names
|
||||
- clocks
|
||||
- devfreq-events
|
||||
- device-handle
|
||||
- reg
|
||||
- samsung,syscon-clk
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/exynos5420.h>
|
||||
ppmu_dmc0_0: ppmu@10d00000 {
|
||||
compatible = "samsung,exynos-ppmu";
|
||||
reg = <0x10d00000 0x2000>;
|
||||
clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
|
||||
clock-names = "ppmu";
|
||||
events {
|
||||
ppmu_event_dmc0_0: ppmu-event3-dmc0-0 {
|
||||
event-name = "ppmu-event3-dmc0_0";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
memory-controller@10c20000 {
|
||||
compatible = "samsung,exynos5422-dmc";
|
||||
reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
|
||||
clocks = <&clock CLK_FOUT_SPLL>,
|
||||
<&clock CLK_MOUT_SCLK_SPLL>,
|
||||
<&clock CLK_FF_DOUT_SPLL2>,
|
||||
<&clock CLK_FOUT_BPLL>,
|
||||
<&clock CLK_MOUT_BPLL>,
|
||||
<&clock CLK_SCLK_BPLL>,
|
||||
<&clock CLK_MOUT_MX_MSPLL_CCORE>,
|
||||
<&clock CLK_MOUT_MCLK_CDREX>;
|
||||
clock-names = "fout_spll",
|
||||
"mout_sclk_spll",
|
||||
"ff_dout_spll2",
|
||||
"fout_bpll",
|
||||
"mout_bpll",
|
||||
"sclk_bpll",
|
||||
"mout_mx_mspll_ccore",
|
||||
"mout_mclk_cdrex";
|
||||
operating-points-v2 = <&dmc_opp_table>;
|
||||
devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
|
||||
<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
|
||||
device-handle = <&samsung_K3QF2F20DB>;
|
||||
vdd-supply = <&buck1_reg>;
|
||||
samsung,syscon-clk = <&clock>;
|
||||
interrupt-parent = <&combiner>;
|
||||
interrupts = <16 0>, <16 1>;
|
||||
interrupt-names = "drex_0", "drex_1";
|
||||
};
|
||||
|
|
@ -0,0 +1,73 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/synopsys,ddrc-ecc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Synopsys IntelliDDR Multi Protocol memory controller
|
||||
|
||||
maintainers:
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
- Manish Narani <manish.narani@xilinx.com>
|
||||
- Michal Simek <michal.simek@xilinx.com>
|
||||
|
||||
description: |
|
||||
The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and
|
||||
32-bit bus width configurations.
|
||||
|
||||
The Zynq DDR ECC controller has an optional ECC support in half-bus width
|
||||
(16-bit) configuration.
|
||||
|
||||
These both ECC controllers correct single bit ECC errors and detect double bit
|
||||
ECC errors.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- xlnx,zynq-ddrc-a05
|
||||
- xlnx,zynqmp-ddrc-2.40a
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: xlnx,zynqmp-ddrc-2.40a
|
||||
then:
|
||||
required:
|
||||
- interrupts
|
||||
else:
|
||||
properties:
|
||||
interrupts: false
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
memory-controller@f8006000 {
|
||||
compatible = "xlnx,zynq-ddrc-a05";
|
||||
reg = <0xf8006000 0x1000>;
|
||||
};
|
||||
|
||||
- |
|
||||
axi {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
memory-controller@fd070000 {
|
||||
compatible = "xlnx,zynqmp-ddrc-2.40a";
|
||||
reg = <0x0 0xfd070000 0x0 0x30000>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <0 112 4>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,32 +0,0 @@
|
|||
Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
|
||||
|
||||
The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit
|
||||
bus width configurations.
|
||||
|
||||
The Zynq DDR ECC controller has an optional ECC support in half-bus width
|
||||
(16-bit) configuration.
|
||||
|
||||
These both ECC controllers correct single bit ECC errors and detect double bit
|
||||
ECC errors.
|
||||
|
||||
Required properties:
|
||||
- compatible: One of:
|
||||
- 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller
|
||||
- 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller
|
||||
- reg: Should contain DDR controller registers location and length.
|
||||
|
||||
Required properties for "xlnx,zynqmp-ddrc-2.40a":
|
||||
- interrupts: Property with a value describing the interrupt number.
|
||||
|
||||
Example:
|
||||
memory-controller@f8006000 {
|
||||
compatible = "xlnx,zynq-ddrc-a05";
|
||||
reg = <0xf8006000 0x1000>;
|
||||
};
|
||||
|
||||
mc: memory-controller@fd070000 {
|
||||
compatible = "xlnx,zynqmp-ddrc-2.40a";
|
||||
reg = <0x0 0xfd070000 0x0 0x30000>;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <0 112 4>;
|
||||
};
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/memory-controllers/ti,da8xx-ddrctl.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Texas Instruments da8xx DDR2/mDDR memory controller
|
||||
|
||||
maintainers:
|
||||
- Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
||||
- Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
||||
|
||||
description: |
|
||||
Documentation:
|
||||
OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: ti,da850-ddr-controller
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
memory-controller@b0000000 {
|
||||
compatible = "ti,da850-ddr-controller";
|
||||
reg = <0xb0000000 0xe8>;
|
||||
};
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
* Device tree bindings for Texas Instruments da8xx DDR2/mDDR memory controller
|
||||
|
||||
The DDR2/mDDR memory controller present on Texas Instruments da8xx SoCs features
|
||||
a set of registers which allow to tweak the controller's behavior.
|
||||
|
||||
Documentation:
|
||||
OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "ti,da850-ddr-controller" - for da850 SoC based boards
|
||||
- reg: a tuple containing the base address of the memory
|
||||
controller and the size of the memory area to map
|
||||
|
||||
Example for da850 shown below.
|
||||
|
||||
ddrctl {
|
||||
compatible = "ti,da850-ddr-controller";
|
||||
reg = <0xb0000000 0xe8>;
|
||||
};
|
||||
|
|
@ -11,9 +11,9 @@ maintainers:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: ti,lp87565
|
||||
- const: ti,lp87565-q1
|
||||
enum:
|
||||
- ti,lp87565
|
||||
- ti,lp87565-q1
|
||||
|
||||
reg:
|
||||
description: I2C slave address
|
||||
|
|
|
|||
|
|
@ -1,29 +0,0 @@
|
|||
EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
|
||||
|
||||
Required properties:
|
||||
- compatible : shall be one of:
|
||||
"atmel,at93c46"
|
||||
"atmel,at93c46d"
|
||||
"atmel,at93c56"
|
||||
"atmel,at93c66"
|
||||
"eeprom-93xx46"
|
||||
"microchip,93lc46b"
|
||||
- data-size : number of data bits per word (either 8 or 16)
|
||||
|
||||
Optional properties:
|
||||
- read-only : parameter-less property which disables writes to the EEPROM
|
||||
- select-gpios : if present, specifies the GPIO that will be asserted prior to
|
||||
each access to the EEPROM (e.g. for SPI bus multiplexing)
|
||||
|
||||
Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
|
||||
apply. In particular, "reg" and "spi-max-frequency" properties must be given.
|
||||
|
||||
Example:
|
||||
eeprom@0 {
|
||||
compatible = "eeprom-93xx46";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cs-high;
|
||||
data-size = <8>;
|
||||
select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
70
Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
Normal file
70
Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
Normal file
|
|
@ -0,0 +1,70 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
|
||||
|
||||
maintainers:
|
||||
- Cory Tusar <cory.tusar@pid1solutions.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- atmel,at93c46
|
||||
- atmel,at93c46d
|
||||
- atmel,at93c56
|
||||
- atmel,at93c66
|
||||
- eeprom-93xx46
|
||||
- microchip,93lc46b
|
||||
|
||||
data-size:
|
||||
description: number of data bits per word
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [8, 16]
|
||||
|
||||
reg:
|
||||
description: chip select of EEPROM
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency: true
|
||||
spi-cs-high: true
|
||||
|
||||
read-only:
|
||||
description:
|
||||
parameter-less property which disables writes to the EEPROM
|
||||
type: boolean
|
||||
|
||||
select-gpios:
|
||||
description:
|
||||
specifies the GPIO that needs to be asserted prior to each access
|
||||
of EEPROM (e.g. for SPI bus multiplexing)
|
||||
maxItems: 1
|
||||
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- data-size
|
||||
- spi-max-frequency
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
eeprom@0 {
|
||||
compatible = "eeprom-93xx46";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cs-high;
|
||||
data-size = <8>;
|
||||
select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
|
@ -10,7 +10,7 @@ Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
|
|||
Required properties:
|
||||
- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and
|
||||
16-bit devices and so must be either 1 or 2 bytes.
|
||||
- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.txt
|
||||
- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
|
||||
- gpmc,cs-on-ns: Chip-select assertion time
|
||||
- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
|
||||
- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
|
||||
|
|
@ -21,7 +21,7 @@ Required properties:
|
|||
- gpmc,access-ns: Start cycle to first data capture (read access)
|
||||
- gpmc,rd-cycle-ns: Total read cycle time
|
||||
- gpmc,wr-cycle-ns: Total write cycle time
|
||||
- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.txt
|
||||
- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
|
||||
- reg: Chip-select, base address (relative to chip-select)
|
||||
and size of NOR flash. Note that base address will be
|
||||
typically 0 as this is the start of the chip-select.
|
||||
|
|
|
|||
|
|
@ -23,6 +23,7 @@ properties:
|
|||
- amd,s29gl256n
|
||||
- amd,s29gl512n
|
||||
- arm,versatile-flash
|
||||
- arm,vexpress-flash
|
||||
- cortina,gemini-flash
|
||||
- cypress,hyperflash
|
||||
- ge,imp3a-firmware-mirror
|
||||
|
|
|
|||
|
|
@ -116,7 +116,6 @@ examples:
|
|||
snps,mtl-rx-config = <&mtl_rx_setup>;
|
||||
snps,mtl-tx-config = <&mtl_tx_setup>;
|
||||
snps,tso;
|
||||
status = "okay";
|
||||
|
||||
mdio0 {
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -71,7 +71,6 @@ examples:
|
|||
ethernet@c8009000 {
|
||||
compatible = "intel,ixp4xx-ethernet";
|
||||
reg = <0xc8009000 0x1000>;
|
||||
status = "disabled";
|
||||
queue-rx = <&qmgr 4>;
|
||||
queue-txready = <&qmgr 21>;
|
||||
intel,npe-handle = <&npe 1>;
|
||||
|
|
@ -82,7 +81,6 @@ examples:
|
|||
ethernet@c800c000 {
|
||||
compatible = "intel,ixp4xx-ethernet";
|
||||
reg = <0xc800c000 0x1000>;
|
||||
status = "disabled";
|
||||
queue-rx = <&qmgr 3>;
|
||||
queue-txready = <&qmgr 20>;
|
||||
intel,npe-handle = <&npe 2>;
|
||||
|
|
|
|||
96
Documentation/devicetree/bindings/net/micrel,ks8851.yaml
Normal file
96
Documentation/devicetree/bindings/net/micrel,ks8851.yaml
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/net/micrel,ks8851.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Micrel KS8851 Ethernet MAC (SPI and Parallel bus options)
|
||||
|
||||
maintainers:
|
||||
- Marek Vasut <marex@denx.de>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- micrel,ks8851 # SPI bus option
|
||||
- micrel,ks8851-mll # Parallel bus option
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
items:
|
||||
- description: SPI or Parallel bus hardware address
|
||||
- description: Parallel bus command mode address
|
||||
|
||||
reset-gpios:
|
||||
maxItems: 1
|
||||
description:
|
||||
The reset_n input pin
|
||||
|
||||
vdd-supply:
|
||||
description: |
|
||||
Analog 3.3V supply for Ethernet MAC
|
||||
|
||||
vdd-io-supply:
|
||||
description: |
|
||||
Digital 1.8V IO supply for Ethernet MAC
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- interrupts
|
||||
|
||||
allOf:
|
||||
- $ref: ethernet-controller.yaml#
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: micrel,ks8851
|
||||
then:
|
||||
properties:
|
||||
reg:
|
||||
maxItems: 1
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: micrel,ks8851-mll
|
||||
then:
|
||||
properties:
|
||||
reg:
|
||||
minItems: 2
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
/* SPI bus option */
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ethernet@0 {
|
||||
compatible = "micrel,ks8851";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&msmgpio>;
|
||||
interrupts = <90 8>;
|
||||
vdd-supply = <&ext_l2>;
|
||||
vdd-io-supply = <&pm8921_lvs6>;
|
||||
reset-gpios = <&msmgpio 89 0>;
|
||||
};
|
||||
};
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
/* Parallel bus option */
|
||||
memory-controller {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
ethernet@1,0 {
|
||||
compatible = "micrel,ks8851-mll";
|
||||
reg = <1 0x0 0x2>, <1 0x2 0x20000>;
|
||||
interrupt-parent = <&gpioc>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,18 +0,0 @@
|
|||
Micrel KS8851 Ethernet mac (MLL)
|
||||
|
||||
Required properties:
|
||||
- compatible = "micrel,ks8851-mll" of parallel interface
|
||||
- reg : 2 physical address and size of registers for data and command
|
||||
- interrupts : interrupt connection
|
||||
|
||||
Micrel KS8851 Ethernet mac (SPI)
|
||||
|
||||
Required properties:
|
||||
- compatible = "micrel,ks8851" or the deprecated "ks8851"
|
||||
- reg : chip select number
|
||||
- interrupts : interrupt connection
|
||||
|
||||
Optional properties:
|
||||
- vdd-supply: analog 3.3V supply for Ethernet mac
|
||||
- vdd-io-supply: digital 1.8V IO supply for Ethernet mac
|
||||
- reset-gpios: reset_n input pin
|
||||
|
|
@ -67,7 +67,7 @@ Example:
|
|||
compatible = "ethernet-phy-id0007.0570";
|
||||
vsc8531,vddmac = <3300>;
|
||||
vsc8531,edge-slowdown = <7>;
|
||||
vsc8531,led-0-mode = <LINK_1000_ACTIVITY>;
|
||||
vsc8531,led-1-mode = <LINK_100_ACTIVITY>;
|
||||
vsc8531,led-0-mode = <VSC8531_LINK_1000_ACTIVITY>;
|
||||
vsc8531,led-1-mode = <VSC8531_LINK_100_ACTIVITY>;
|
||||
load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -90,14 +90,11 @@ examples:
|
|||
# UART example on Raspberry Pi
|
||||
- |
|
||||
uart0 {
|
||||
status = "okay";
|
||||
|
||||
nfc {
|
||||
compatible = "samsung,s3fwrn82";
|
||||
|
||||
en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
|
||||
wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -101,8 +101,6 @@ examples:
|
|||
|
||||
phy-mode = "gmii";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
|
|
@ -148,32 +146,24 @@ examples:
|
|||
reg = <0x1>;
|
||||
phy-handle = <&phy_port0>;
|
||||
phy-mode = "internal";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
switch_port2: port@2 {
|
||||
reg = <0x2>;
|
||||
phy-handle = <&phy_port1>;
|
||||
phy-mode = "internal";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
switch_port3: port@3 {
|
||||
reg = <0x3>;
|
||||
phy-handle = <&phy_port2>;
|
||||
phy-mode = "internal";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
switch_port4: port@4 {
|
||||
reg = <0x4>;
|
||||
phy-handle = <&phy_port3>;
|
||||
phy-mode = "internal";
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -183,34 +173,29 @@ examples:
|
|||
|
||||
interrupt-parent = <&switch10>;
|
||||
|
||||
phy_port0: phy@0 {
|
||||
phy_port0: ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
interrupts = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy_port1: phy@1 {
|
||||
phy_port1: ethernet-phy@1 {
|
||||
reg = <0x1>;
|
||||
interrupts = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy_port2: phy@2 {
|
||||
phy_port2: ethernet-phy@2 {
|
||||
reg = <0x2>;
|
||||
interrupts = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy_port3: phy@3 {
|
||||
phy_port3: ethernet-phy@3 {
|
||||
reg = <0x3>;
|
||||
interrupts = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
phy_port4: phy@4 {
|
||||
phy_port4: ethernet-phy@4 {
|
||||
reg = <0x4>;
|
||||
interrupts = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -17,10 +17,10 @@ description:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: "realtek,rtl8723bs-bt"
|
||||
- const: "realtek,rtl8723cs-bt"
|
||||
- const: "realtek,rtl8822cs-bt"
|
||||
enum:
|
||||
- realtek,rtl8723bs-bt
|
||||
- realtek,rtl8723cs-bt
|
||||
- realtek,rtl8822cs-bt
|
||||
|
||||
device-wake-gpios:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -43,23 +43,20 @@ properties:
|
|||
- renesas,etheravb-r8a779a0 # R-Car V3U
|
||||
- const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
|
||||
|
||||
- items:
|
||||
- enum:
|
||||
- renesas,r9a07g044-gbeth # RZ/G2{L,LC}
|
||||
- const: renesas,rzg2l-gbeth # RZ/G2L
|
||||
|
||||
reg: true
|
||||
|
||||
interrupts: true
|
||||
|
||||
interrupt-names: true
|
||||
|
||||
clocks:
|
||||
minItems: 1
|
||||
items:
|
||||
- description: AVB functional clock
|
||||
- description: Optional TXC reference clock
|
||||
clocks: true
|
||||
|
||||
clock-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: fck
|
||||
- const: refclk
|
||||
clock-names: true
|
||||
|
||||
iommus:
|
||||
maxItems: 1
|
||||
|
|
@ -145,14 +142,20 @@ allOf:
|
|||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: renesas,etheravb-rcar-gen2
|
||||
enum:
|
||||
- renesas,etheravb-rcar-gen2
|
||||
- renesas,rzg2l-gbeth
|
||||
then:
|
||||
properties:
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
minItems: 1
|
||||
maxItems: 3
|
||||
interrupt-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: mux
|
||||
- const: fil
|
||||
- const: arp_ns
|
||||
rx-internal-delay-ps: false
|
||||
else:
|
||||
properties:
|
||||
|
|
@ -208,6 +211,36 @@ allOf:
|
|||
tx-internal-delay-ps:
|
||||
const: 2000
|
||||
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: renesas,rzg2l-gbeth
|
||||
then:
|
||||
properties:
|
||||
clocks:
|
||||
items:
|
||||
- description: Main clock
|
||||
- description: Register access clock
|
||||
- description: Reference clock for RGMII
|
||||
clock-names:
|
||||
items:
|
||||
- const: axi
|
||||
- const: chi
|
||||
- const: refclk
|
||||
else:
|
||||
properties:
|
||||
clocks:
|
||||
minItems: 1
|
||||
items:
|
||||
- description: AVB functional clock
|
||||
- description: Optional TXC reference clock
|
||||
clock-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: fck
|
||||
- const: refclk
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
|
|
|
|||
|
|
@ -53,10 +53,10 @@ properties:
|
|||
"#size-cells": true
|
||||
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: ti,am654-cpsw-nuss
|
||||
- const: ti,j721e-cpsw-nuss
|
||||
- const: ti,am642-cpsw-nuss
|
||||
enum:
|
||||
- ti,am654-cpsw-nuss
|
||||
- ti,j721e-cpsw-nuss
|
||||
- ti,am642-cpsw-nuss
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -45,9 +45,9 @@ properties:
|
|||
pattern: "^cpts@[0-9a-f]+$"
|
||||
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: ti,am65-cpts
|
||||
- const: ti,j721e-cpts
|
||||
enum:
|
||||
- ti,am65-cpts
|
||||
- ti,j721e-cpts
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
|
|
|||
|
|
@ -40,7 +40,7 @@ properties:
|
|||
maxItems: 1
|
||||
|
||||
patternProperties:
|
||||
"^.*@[0-9a-f]+$":
|
||||
"@[0-9a-f]+(,[0-7])?$":
|
||||
type: object
|
||||
|
||||
properties:
|
||||
|
|
|
|||
|
|
@ -0,0 +1,95 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/nvmem/socionext,uniphier-efuse.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Socionext UniPhier eFuse bindings
|
||||
|
||||
maintainers:
|
||||
- Keiji Hayashibara <hayashibara.keiji@socionext.com>
|
||||
- Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "nvmem.yaml#"
|
||||
|
||||
properties:
|
||||
"#address-cells": true
|
||||
"#size-cells": true
|
||||
|
||||
compatible:
|
||||
const: socionext,uniphier-efuse
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
// The UniPhier eFuse should be a subnode of a "soc-glue" node.
|
||||
|
||||
soc-glue@5f900000 {
|
||||
compatible = "simple-mfd";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x5f900000 0x2000>;
|
||||
|
||||
efuse@100 {
|
||||
compatible = "socionext,uniphier-efuse";
|
||||
reg = <0x100 0x28>;
|
||||
};
|
||||
|
||||
efuse@200 {
|
||||
compatible = "socionext,uniphier-efuse";
|
||||
reg = <0x200 0x68>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* Data cells */
|
||||
usb_rterm0: trim@54,4 {
|
||||
reg = <0x54 1>;
|
||||
bits = <4 2>;
|
||||
};
|
||||
usb_rterm1: trim@55,4 {
|
||||
reg = <0x55 1>;
|
||||
bits = <4 2>;
|
||||
};
|
||||
usb_rterm2: trim@58,4 {
|
||||
reg = <0x58 1>;
|
||||
bits = <4 2>;
|
||||
};
|
||||
usb_rterm3: trim@59,4 {
|
||||
reg = <0x59 1>;
|
||||
bits = <4 2>;
|
||||
};
|
||||
usb_sel_t0: trim@54,0 {
|
||||
reg = <0x54 1>;
|
||||
bits = <0 4>;
|
||||
};
|
||||
usb_sel_t1: trim@55,0 {
|
||||
reg = <0x55 1>;
|
||||
bits = <0 4>;
|
||||
};
|
||||
usb_sel_t2: trim@58,0 {
|
||||
reg = <0x58 1>;
|
||||
bits = <0 4>;
|
||||
};
|
||||
usb_sel_t3: trim@59,0 {
|
||||
reg = <0x59 1>;
|
||||
bits = <0 4>;
|
||||
};
|
||||
usb_hs_i0: trim@56,0 {
|
||||
reg = <0x56 1>;
|
||||
bits = <0 4>;
|
||||
};
|
||||
usb_hs_i2: trim@5a,0 {
|
||||
reg = <0x5a 1>;
|
||||
bits = <0 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
= UniPhier eFuse device tree bindings =
|
||||
|
||||
This UniPhier eFuse must be under soc-glue.
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "socionext,uniphier-efuse"
|
||||
- reg: should contain the register location and length
|
||||
|
||||
= Data cells =
|
||||
Are child nodes of efuse, bindings of which as described in
|
||||
bindings/nvmem/nvmem.txt
|
||||
|
||||
Example:
|
||||
|
||||
soc-glue@5f900000 {
|
||||
compatible = "socionext,uniphier-ld20-soc-glue-debug",
|
||||
"simple-mfd";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x5f900000 0x2000>;
|
||||
|
||||
efuse@100 {
|
||||
compatible = "socionext,uniphier-efuse";
|
||||
reg = <0x100 0x28>;
|
||||
};
|
||||
|
||||
efuse@200 {
|
||||
compatible = "socionext,uniphier-efuse";
|
||||
reg = <0x200 0x68>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* Data cells */
|
||||
usb_mon: usb-mon@54 {
|
||||
reg = <0x54 0xc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
= Data consumers =
|
||||
Are device nodes which consume nvmem data cells.
|
||||
|
||||
Example:
|
||||
|
||||
usb {
|
||||
...
|
||||
nvmem-cells = <&usb_mon>;
|
||||
nvmem-cell-names = "usb_mon";
|
||||
}
|
||||
|
|
@ -3,7 +3,7 @@ Amlogic Meson AXG DWC PCIE SoC controller
|
|||
Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
|
||||
It shares common functions with the PCIe DesignWare core driver and
|
||||
inherits common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
|
||||
|
||||
Additional properties are described here:
|
||||
|
||||
|
|
@ -33,7 +33,7 @@ Required properties:
|
|||
- phy-names: must contain "pcie"
|
||||
|
||||
- device_type:
|
||||
should be "pci". As specified in designware-pcie.txt
|
||||
should be "pci". As specified in snps,dw-pcie.yaml
|
||||
|
||||
|
||||
Example configuration:
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
* Axis ARTPEC-6 PCIe interface
|
||||
|
||||
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||||
and thus inherits all the common properties defined in designware-pcie.txt.
|
||||
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
||||
|
||||
Required properties:
|
||||
- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
|
||||
|
|
|
|||
|
|
@ -1,77 +0,0 @@
|
|||
* Synopsys DesignWare PCIe interface
|
||||
|
||||
Required properties:
|
||||
- compatible:
|
||||
"snps,dw-pcie" for RC mode;
|
||||
"snps,dw-pcie-ep" for EP mode;
|
||||
- reg: For designware cores version < 4.80 contains the configuration
|
||||
address space. For designware core version >= 4.80, contains
|
||||
the configuration and ATU address space
|
||||
- reg-names: Must be "config" for the PCIe configuration space and "atu" for
|
||||
the ATU address space.
|
||||
(The old way of getting the configuration address space from "ranges"
|
||||
is deprecated and should be avoided.)
|
||||
RC mode:
|
||||
- #address-cells: set to <3>
|
||||
- #size-cells: set to <2>
|
||||
- device_type: set to "pci"
|
||||
- ranges: ranges for the PCI memory and I/O regions
|
||||
- #interrupt-cells: set to <1>
|
||||
- interrupt-map-mask and interrupt-map: standard PCI
|
||||
properties to define the mapping of the PCIe interface to interrupt
|
||||
numbers.
|
||||
EP mode:
|
||||
- num-ib-windows: number of inbound address translation windows
|
||||
- num-ob-windows: number of outbound address translation windows
|
||||
|
||||
Optional properties:
|
||||
- num-lanes: number of lanes to use (this property should be specified unless
|
||||
the link is brought already up in BIOS)
|
||||
- reset-gpio: GPIO pin number of power good signal
|
||||
- clocks: Must contain an entry for each entry in clock-names.
|
||||
See ../clocks/clock-bindings.txt for details.
|
||||
- clock-names: Must include the following entries:
|
||||
- "pcie"
|
||||
- "pcie_bus"
|
||||
- snps,enable-cdm-check: This is a boolean property and if present enables
|
||||
automatic checking of CDM (Configuration Dependent Module) registers
|
||||
for data corruption. CDM registers include standard PCIe configuration
|
||||
space registers, Port Logic registers, DMA and iATU (internal Address
|
||||
Translation Unit) registers.
|
||||
RC mode:
|
||||
- num-viewport: number of view ports configured in hardware. If a platform
|
||||
does not specify it, the driver assumes 2.
|
||||
- bus-range: PCI bus numbers covered (it is recommended for new devicetrees
|
||||
to specify this property, to keep backwards compatibility a range of
|
||||
0x00-0xff is assumed if not present)
|
||||
|
||||
EP mode:
|
||||
- max-functions: maximum number of functions that can be configured
|
||||
|
||||
Example configuration:
|
||||
|
||||
pcie: pcie@dfc00000 {
|
||||
compatible = "snps,dw-pcie";
|
||||
reg = <0xdfc00000 0x0001000>, /* IP registers */
|
||||
<0xd0000000 0x0002000>; /* Configuration space */
|
||||
reg-names = "dbi", "config";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
|
||||
0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
|
||||
interrupts = <25>, <24>;
|
||||
#interrupt-cells = <1>;
|
||||
num-lanes = <1>;
|
||||
};
|
||||
or
|
||||
pcie: pcie@dfc00000 {
|
||||
compatible = "snps,dw-pcie-ep";
|
||||
reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
|
||||
<0xdfc01000 0x0001000>, /* IP registers 2 */
|
||||
<0xd0000000 0x2000000>; /* Configuration space */
|
||||
reg-names = "dbi", "dbi2", "addr_space";
|
||||
num-ib-windows = <6>;
|
||||
num-ob-windows = <2>;
|
||||
num-lanes = <1>;
|
||||
};
|
||||
|
|
@ -1,135 +0,0 @@
|
|||
Faraday Technology FTPCI100 PCI Host Bridge
|
||||
|
||||
This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
|
||||
is a generic IP block from Faraday Technology. It exists in two variants:
|
||||
plain and dual PCI. The plain version embeds a cascading interrupt controller
|
||||
into the host bridge. The dual version routes the interrupts to the host
|
||||
chips interrupt controller.
|
||||
|
||||
The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
|
||||
Technology) and product ID 0x4321.
|
||||
|
||||
Mandatory properties:
|
||||
|
||||
- compatible: ranging from specific to generic, should be one of
|
||||
"cortina,gemini-pci", "faraday,ftpci100"
|
||||
"cortina,gemini-pci-dual", "faraday,ftpci100-dual"
|
||||
"faraday,ftpci100"
|
||||
"faraday,ftpci100-dual"
|
||||
- reg: memory base and size for the host bridge
|
||||
- #address-cells: set to <3>
|
||||
- #size-cells: set to <2>
|
||||
- #interrupt-cells: set to <1>
|
||||
- bus-range: set to <0x00 0xff>
|
||||
- device_type, set to "pci"
|
||||
- ranges: see pci.txt
|
||||
- interrupt-map-mask: see pci.txt
|
||||
- interrupt-map: see pci.txt
|
||||
- dma-ranges: three ranges for the inbound memory region. The ranges must
|
||||
be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
|
||||
128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
|
||||
pre-fetchable.
|
||||
|
||||
Optional properties:
|
||||
- clocks: when present, this should contain the peripheral clock (PCLK) and the
|
||||
PCI clock (PCICLK). If these are not present, they are assumed to be
|
||||
hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
|
||||
- clock-names: when present, this should contain "PCLK" for the peripheral
|
||||
clock and "PCICLK" for the PCI-side clock.
|
||||
|
||||
Mandatory subnodes:
|
||||
- For "faraday,ftpci100" a node representing the interrupt-controller inside the
|
||||
host bridge is mandatory. It has the following mandatory properties:
|
||||
- interrupt: see interrupt-controller/interrupts.txt
|
||||
- interrupt-controller: see interrupt-controller/interrupts.txt
|
||||
- #address-cells: set to <0>
|
||||
- #interrupt-cells: set to <1>
|
||||
|
||||
I/O space considerations:
|
||||
|
||||
The plain variant has 128MiB of non-prefetchable memory space, whereas the
|
||||
"dual" variant has 64MiB. Take this into account when describing the ranges.
|
||||
|
||||
Interrupt map considerations:
|
||||
|
||||
The "dual" variant will get INT A, B, C, D from the system interrupt controller
|
||||
and should point to respective interrupt in that controller in its
|
||||
interrupt-map.
|
||||
|
||||
The code which is the only documentation of how the Faraday PCI (the non-dual
|
||||
variant) interrupts assigns the default interrupt mapping/swizzling has
|
||||
typically been like this, doing the swizzling on the interrupt controller side
|
||||
rather than in the interconnect:
|
||||
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map =
|
||||
<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
|
||||
<0x4800 0 0 2 &pci_intc 1>,
|
||||
<0x4800 0 0 3 &pci_intc 2>,
|
||||
<0x4800 0 0 4 &pci_intc 3>,
|
||||
<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
|
||||
<0x5000 0 0 2 &pci_intc 2>,
|
||||
<0x5000 0 0 3 &pci_intc 3>,
|
||||
<0x5000 0 0 4 &pci_intc 0>,
|
||||
<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
|
||||
<0x5800 0 0 2 &pci_intc 3>,
|
||||
<0x5800 0 0 3 &pci_intc 0>,
|
||||
<0x5800 0 0 4 &pci_intc 1>,
|
||||
<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
|
||||
<0x6000 0 0 2 &pci_intc 0>,
|
||||
<0x6000 0 0 3 &pci_intc 1>,
|
||||
<0x6000 0 0 4 &pci_intc 2>;
|
||||
|
||||
Example:
|
||||
|
||||
pci@50000000 {
|
||||
compatible = "cortina,gemini-pci", "faraday,ftpci100";
|
||||
reg = <0x50000000 0x100>;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, /* PCI A */
|
||||
<26 IRQ_TYPE_LEVEL_HIGH>, /* PCI B */
|
||||
<27 IRQ_TYPE_LEVEL_HIGH>, /* PCI C */
|
||||
<28 IRQ_TYPE_LEVEL_HIGH>; /* PCI D */
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
bus-range = <0x00 0xff>;
|
||||
ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
|
||||
<0x01000000 0 0 0x50000000 0 0x00100000>,
|
||||
/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
|
||||
<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
|
||||
|
||||
/* DMA ranges */
|
||||
dma-ranges =
|
||||
/* 128MiB at 0x00000000-0x07ffffff */
|
||||
<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
|
||||
/* 64MiB at 0x00000000-0x03ffffff */
|
||||
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
|
||||
/* 64MiB at 0x00000000-0x03ffffff */
|
||||
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
|
||||
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map =
|
||||
<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
|
||||
<0x4800 0 0 2 &pci_intc 1>,
|
||||
<0x4800 0 0 3 &pci_intc 2>,
|
||||
<0x4800 0 0 4 &pci_intc 3>,
|
||||
<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
|
||||
<0x5000 0 0 2 &pci_intc 2>,
|
||||
<0x5000 0 0 3 &pci_intc 3>,
|
||||
<0x5000 0 0 4 &pci_intc 0>,
|
||||
<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
|
||||
<0x5800 0 0 2 &pci_intc 3>,
|
||||
<0x5800 0 0 3 &pci_intc 0>,
|
||||
<0x5800 0 0 4 &pci_intc 1>,
|
||||
<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
|
||||
<0x6000 0 0 2 &pci_intc 0>,
|
||||
<0x6000 0 0 3 &pci_intc 0>,
|
||||
<0x6000 0 0 4 &pci_intc 0>;
|
||||
pci_intc: interrupt-controller {
|
||||
interrupt-parent = <&intcon>;
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
};
|
||||
174
Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
Normal file
174
Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
Normal file
|
|
@ -0,0 +1,174 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Faraday Technology FTPCI100 PCI Host Bridge
|
||||
|
||||
maintainers:
|
||||
- Linus Walleij <linus.walleij@linaro.org>
|
||||
|
||||
description: |
|
||||
This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
|
||||
is a generic IP block from Faraday Technology. It exists in two variants:
|
||||
plain and dual PCI. The plain version embeds a cascading interrupt controller
|
||||
into the host bridge. The dual version routes the interrupts to the host
|
||||
chips interrupt controller.
|
||||
The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
|
||||
Technology) and product ID 0x4321.
|
||||
I/O space considerations:
|
||||
The plain variant has 128MiB of non-prefetchable memory space, whereas the
|
||||
"dual" variant has 64MiB. Take this into account when describing the ranges.
|
||||
|
||||
Interrupt map considerations:
|
||||
|
||||
The "dual" variant will get INT A, B, C, D from the system interrupt controller
|
||||
and should point to respective interrupt in that controller in its interrupt-map.
|
||||
|
||||
The code which is the only documentation of how the Faraday PCI (the non-dual
|
||||
variant) interrupts assigns the default interrupt mapping/swizzling has
|
||||
typically been like this, doing the swizzling on the interrupt controller side
|
||||
rather than in the interconnect:
|
||||
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map =
|
||||
<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
|
||||
<0x4800 0 0 2 &pci_intc 1>,
|
||||
<0x4800 0 0 3 &pci_intc 2>,
|
||||
<0x4800 0 0 4 &pci_intc 3>,
|
||||
<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
|
||||
<0x5000 0 0 2 &pci_intc 2>,
|
||||
<0x5000 0 0 3 &pci_intc 3>,
|
||||
<0x5000 0 0 4 &pci_intc 0>,
|
||||
<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
|
||||
<0x5800 0 0 2 &pci_intc 3>,
|
||||
<0x5800 0 0 3 &pci_intc 0>,
|
||||
<0x5800 0 0 4 &pci_intc 1>,
|
||||
<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
|
||||
<0x6000 0 0 2 &pci_intc 0>,
|
||||
<0x6000 0 0 3 &pci_intc 1>,
|
||||
<0x6000 0 0 4 &pci_intc 2>;
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-bus.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- items:
|
||||
- const: cortina,gemini-pci
|
||||
- const: faraday,ftpci100
|
||||
- items:
|
||||
- const: cortina,gemini-pci-dual
|
||||
- const: faraday,ftpci100-dual
|
||||
- const: faraday,ftpci100
|
||||
- const: faraday,ftpci100-dual
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
"#address-cells":
|
||||
const: 3
|
||||
|
||||
"#interrupt-cells":
|
||||
const: 1
|
||||
|
||||
ranges:
|
||||
minItems: 2
|
||||
|
||||
dma-ranges:
|
||||
minItems: 3
|
||||
description: |
|
||||
three ranges for the inbound memory region. The ranges must
|
||||
be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
|
||||
128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
|
||||
pre-fetchable.
|
||||
|
||||
clocks:
|
||||
items:
|
||||
- description: peripheral clock (PCLK)
|
||||
- description: PCI clock (PCICLK).
|
||||
description: |
|
||||
If these are not present, they are assumed to be
|
||||
hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
|
||||
|
||||
clock-names:
|
||||
items:
|
||||
- const: PCLK
|
||||
- const: PCICLK
|
||||
|
||||
interrupt-controller:
|
||||
type: object
|
||||
|
||||
required:
|
||||
- reg
|
||||
- compatible
|
||||
- "#interrupt-cells"
|
||||
- interrupt-map-mask
|
||||
- interrupt-map
|
||||
- dma-ranges
|
||||
|
||||
if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: faraday,ftpci100
|
||||
then:
|
||||
required:
|
||||
- interrupt-controller
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
pci@50000000 {
|
||||
compatible = "cortina,gemini-pci", "faraday,ftpci100";
|
||||
reg = <0x50000000 0x100>;
|
||||
device_type = "pci";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
bus-range = <0x00 0xff>;
|
||||
ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
|
||||
<0x01000000 0 0 0x50000000 0 0x00100000>,
|
||||
/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
|
||||
<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
|
||||
|
||||
/* DMA ranges */
|
||||
dma-ranges =
|
||||
/* 128MiB at 0x00000000-0x07ffffff */
|
||||
<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
|
||||
/* 64MiB at 0x00000000-0x03ffffff */
|
||||
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
|
||||
/* 64MiB at 0x00000000-0x03ffffff */
|
||||
<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
|
||||
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map =
|
||||
<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
|
||||
<0x4800 0 0 2 &pci_intc 1>,
|
||||
<0x4800 0 0 3 &pci_intc 2>,
|
||||
<0x4800 0 0 4 &pci_intc 3>,
|
||||
<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
|
||||
<0x5000 0 0 2 &pci_intc 2>,
|
||||
<0x5000 0 0 3 &pci_intc 3>,
|
||||
<0x5000 0 0 4 &pci_intc 0>,
|
||||
<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
|
||||
<0x5800 0 0 2 &pci_intc 3>,
|
||||
<0x5800 0 0 3 &pci_intc 0>,
|
||||
<0x5800 0 0 4 &pci_intc 1>,
|
||||
<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
|
||||
<0x6000 0 0 2 &pci_intc 0>,
|
||||
<0x6000 0 0 3 &pci_intc 0>,
|
||||
<0x6000 0 0 4 &pci_intc 0>;
|
||||
pci_intc: interrupt-controller {
|
||||
interrupt-parent = <&intcon>;
|
||||
interrupt-controller;
|
||||
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -1,100 +0,0 @@
|
|||
* Freescale i.MX6 PCIe interface
|
||||
|
||||
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||||
and thus inherits all the common properties defined in designware-pcie.txt.
|
||||
|
||||
Required properties:
|
||||
- compatible:
|
||||
- "fsl,imx6q-pcie"
|
||||
- "fsl,imx6sx-pcie",
|
||||
- "fsl,imx6qp-pcie"
|
||||
- "fsl,imx7d-pcie"
|
||||
- "fsl,imx8mq-pcie"
|
||||
- reg: base address and length of the PCIe controller
|
||||
- interrupts: A list of interrupt outputs of the controller. Must contain an
|
||||
entry for each entry in the interrupt-names property.
|
||||
- interrupt-names: Must include the following entries:
|
||||
- "msi": The interrupt that is asserted when an MSI is received
|
||||
- clock-names: Must include the following additional entries:
|
||||
- "pcie_phy"
|
||||
|
||||
Optional properties:
|
||||
- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
|
||||
- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
|
||||
- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
|
||||
- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
|
||||
- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
|
||||
- fsl,max-link-speed: Specify PCI gen for link capability. Must be '2' for
|
||||
gen2, otherwise will default to gen1. Note that the IMX6 LVDS clock outputs
|
||||
do not meet gen2 jitter requirements and thus for gen2 capability a gen2
|
||||
compliant clock generator should be used and configured.
|
||||
- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset
|
||||
signal. It's not polarity aware and defaults to active-low reset sequence
|
||||
(L=reset state, H=operation state).
|
||||
- reset-gpio-active-high: If present then the reset sequence using the GPIO
|
||||
specified in the "reset-gpio" property is reversed (H=reset state,
|
||||
L=operation state).
|
||||
- vpcie-supply: Should specify the regulator in charge of PCIe port power.
|
||||
The regulator will be enabled when initializing the PCIe host and
|
||||
disabled either as part of the init process or when shutting down the
|
||||
host.
|
||||
- vph-supply: Should specify the regulator in charge of VPH one of the three
|
||||
PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
|
||||
supplies.
|
||||
|
||||
Additional required properties for imx6sx-pcie:
|
||||
- clock names: Must include the following additional entries:
|
||||
- "pcie_inbound_axi"
|
||||
- power-domains: Must be set to phandles pointing to the DISPLAY and
|
||||
PCIE_PHY power domains
|
||||
- power-domain-names: Must be "pcie", "pcie_phy"
|
||||
|
||||
Additional required properties for imx7d-pcie and imx8mq-pcie:
|
||||
- power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
|
||||
- resets: Must contain phandles to PCIe-related reset lines exposed by SRC
|
||||
IP block
|
||||
- reset-names: Must contain the following entries:
|
||||
- "pciephy"
|
||||
- "apps"
|
||||
- "turnoff"
|
||||
- fsl,imx7d-pcie-phy: A phandle to an fsl,imx7d-pcie-phy node.
|
||||
|
||||
Additional required properties for imx8mq-pcie:
|
||||
- clock-names: Must include the following additional entries:
|
||||
- "pcie_aux"
|
||||
|
||||
Example:
|
||||
|
||||
pcie@01000000 {
|
||||
compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
|
||||
reg = <0x01ffc000 0x04000>,
|
||||
<0x01f00000 0x80000>;
|
||||
reg-names = "dbi", "config";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000
|
||||
0x81000000 0 0 0x01f80000 0 0x00010000
|
||||
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
|
||||
num-lanes = <1>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks 144>, <&clks 206>, <&clks 189>;
|
||||
clock-names = "pcie", "pcie_bus", "pcie_phy";
|
||||
};
|
||||
|
||||
* Freescale i.MX7d PCIe PHY
|
||||
|
||||
This is the PHY associated with the IMX7d PCIe controller. It's used by the
|
||||
PCI-e controller via the fsl,imx7d-pcie-phy phandle.
|
||||
|
||||
Required properties:
|
||||
- compatible:
|
||||
- "fsl,imx7d-pcie-phy"
|
||||
- reg: base address and length of the PCIe PHY controller
|
||||
202
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
Normal file
202
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
Normal file
|
|
@ -0,0 +1,202 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale i.MX6 PCIe host controller
|
||||
|
||||
maintainers:
|
||||
- Lucas Stach <l.stach@pengutronix.de>
|
||||
- Richard Zhu <hongxing.zhu@nxp.com>
|
||||
|
||||
description: |+
|
||||
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||||
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/snps,dw-pcie.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- fsl,imx6q-pcie
|
||||
- fsl,imx6sx-pcie
|
||||
- fsl,imx6qp-pcie
|
||||
- fsl,imx7d-pcie
|
||||
- fsl,imx8mq-pcie
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: Data Bus Interface (DBI) registers.
|
||||
- description: PCIe configuration space region.
|
||||
|
||||
reg-names:
|
||||
items:
|
||||
- const: dbi
|
||||
- const: config
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: builtin MSI controller.
|
||||
|
||||
interrupt-names:
|
||||
minItems: 1
|
||||
items:
|
||||
- const: msi
|
||||
|
||||
clocks:
|
||||
minItems: 3
|
||||
items:
|
||||
- description: PCIe bridge clock.
|
||||
- description: PCIe bus clock.
|
||||
- description: PCIe PHY clock.
|
||||
- description: Additional required clock entry for imx6sx-pcie,
|
||||
imx8mq-pcie.
|
||||
|
||||
clock-names:
|
||||
minItems: 3
|
||||
items:
|
||||
- const: pcie
|
||||
- const: pcie_bus
|
||||
- const: pcie_phy
|
||||
- const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
|
||||
|
||||
num-lanes:
|
||||
const: 1
|
||||
|
||||
fsl,imx7d-pcie-phy:
|
||||
$ref: /schemas/types.yaml#/definitions/phandle
|
||||
description: A phandle to an fsl,imx7d-pcie-phy node. Additional
|
||||
required properties for imx7d-pcie and imx8mq-pcie.
|
||||
|
||||
power-domains:
|
||||
items:
|
||||
- description: The phandle pointing to the DISPLAY domain for
|
||||
imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
|
||||
imx8mq-pcie.
|
||||
- description: The phandle pointing to the PCIE_PHY power domains
|
||||
for imx6sx-pcie.
|
||||
|
||||
power-domain-names:
|
||||
items:
|
||||
- const: pcie
|
||||
- const: pcie_phy
|
||||
|
||||
resets:
|
||||
maxItems: 3
|
||||
description: Phandles to PCIe-related reset lines exposed by SRC
|
||||
IP block. Additional required by imx7d-pcie and imx8mq-pcie.
|
||||
|
||||
reset-names:
|
||||
items:
|
||||
- const: pciephy
|
||||
- const: apps
|
||||
- const: turnoff
|
||||
|
||||
fsl,tx-deemph-gen1:
|
||||
description: Gen1 De-emphasis value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 0
|
||||
|
||||
fsl,tx-deemph-gen2-3p5db:
|
||||
description: Gen2 (3.5db) De-emphasis value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 0
|
||||
|
||||
fsl,tx-deemph-gen2-6db:
|
||||
description: Gen2 (6db) De-emphasis value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 20
|
||||
|
||||
fsl,tx-swing-full:
|
||||
description: Gen2 TX SWING FULL value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 127
|
||||
|
||||
fsl,tx-swing-low:
|
||||
description: TX launch amplitude swing_low value (optional required).
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
default: 127
|
||||
|
||||
fsl,max-link-speed:
|
||||
description: Specify PCI Gen for link capability (optional required).
|
||||
Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
|
||||
requirements and thus for gen2 capability a gen2 compliant clock
|
||||
generator should be used and configured.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [1, 2, 3, 4]
|
||||
default: 1
|
||||
|
||||
reset-gpio:
|
||||
description: Should specify the GPIO for controlling the PCI bus device
|
||||
reset signal. It's not polarity aware and defaults to active-low reset
|
||||
sequence (L=reset state, H=operation state) (optional required).
|
||||
|
||||
reset-gpio-active-high:
|
||||
description: If present then the reset sequence using the GPIO
|
||||
specified in the "reset-gpio" property is reversed (H=reset state,
|
||||
L=operation state) (optional required).
|
||||
|
||||
vpcie-supply:
|
||||
description: Should specify the regulator in charge of PCIe port power.
|
||||
The regulator will be enabled when initializing the PCIe host and
|
||||
disabled either as part of the init process or when shutting down
|
||||
the host (optional required).
|
||||
|
||||
vph-supply:
|
||||
description: Should specify the regulator in charge of VPH one of
|
||||
the three PCIe PHY powers. This regulator can be supplied by both
|
||||
1.8v and 3.3v voltage supplies (optional required).
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
- device_type
|
||||
- bus-range
|
||||
- ranges
|
||||
- num-lanes
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
- "#interrupt-cells"
|
||||
- interrupt-map-mask
|
||||
- interrupt-map
|
||||
- clocks
|
||||
- clock-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx6qdl-clock.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
pcie: pcie@1ffc000 {
|
||||
compatible = "fsl,imx6q-pcie";
|
||||
reg = <0x01ffc000 0x04000>,
|
||||
<0x01f00000 0x80000>;
|
||||
reg-names = "dbi", "config";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
bus-range = <0x00 0xff>;
|
||||
ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>,
|
||||
<0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
|
||||
num-lanes = <1>;
|
||||
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0x7>;
|
||||
interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
|
||||
<&clks IMX6QDL_CLK_LVDS1_GATE>,
|
||||
<&clks IMX6QDL_CLK_PCIE_REF_125M>;
|
||||
clock-names = "pcie", "pcie_bus", "pcie_phy";
|
||||
};
|
||||
...
|
||||
167
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
Normal file
167
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
Normal file
|
|
@ -0,0 +1,167 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: HiSilicon Kirin SoCs PCIe host DT description
|
||||
|
||||
maintainers:
|
||||
- Xiaowei Song <songxiaowei@hisilicon.com>
|
||||
- Binghui Wang <wangbinghui@hisilicon.com>
|
||||
|
||||
description: |
|
||||
Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
|
||||
It shares common functions with the PCIe DesignWare core driver and
|
||||
inherits common properties defined in
|
||||
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/snps,dw-pcie.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
enum:
|
||||
- hisilicon,kirin960-pcie
|
||||
- hisilicon,kirin970-pcie
|
||||
|
||||
reg:
|
||||
description: |
|
||||
Should contain dbi, apb, config registers location and length.
|
||||
For hisilicon,kirin960-pcie, it should also contain phy.
|
||||
minItems: 3
|
||||
maxItems: 4
|
||||
|
||||
reg-names:
|
||||
minItems: 3
|
||||
maxItems: 4
|
||||
|
||||
hisilicon,clken-gpios:
|
||||
description: |
|
||||
Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
|
||||
mini-PCIe slots.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- reg-names
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/hi3660-clock.h>
|
||||
#include <dt-bindings/clock/hi3670-clock.h>
|
||||
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
|
||||
pcie@f4000000 {
|
||||
compatible = "hisilicon,kirin960-pcie";
|
||||
reg = <0x0 0xf4000000 0x0 0x1000>,
|
||||
<0x0 0xff3fe000 0x0 0x1000>,
|
||||
<0x0 0xf3f20000 0x0 0x40000>,
|
||||
<0x0 0xf5000000 0x0 0x2000>;
|
||||
reg-names = "dbi", "apb", "phy", "config";
|
||||
bus-range = <0x0 0xff>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
ranges = <0x02000000 0x0 0x00000000
|
||||
0x0 0xf6000000
|
||||
0x0 0x02000000>;
|
||||
num-lanes = <1>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupts = <0 283 4>;
|
||||
interrupt-names = "msi";
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
|
||||
<&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
|
||||
<&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
|
||||
<&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
|
||||
<&crg_ctrl HI3660_ACLK_GATE_PCIE>;
|
||||
clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
|
||||
"pcie_apb_sys", "pcie_aclk";
|
||||
};
|
||||
|
||||
pcie@f5000000 {
|
||||
compatible = "hisilicon,kirin970-pcie";
|
||||
reg = <0x0 0xf4000000 0x0 0x1000000>,
|
||||
<0x0 0xfc180000 0x0 0x1000>,
|
||||
<0x0 0xf5000000 0x0 0x2000>;
|
||||
reg-names = "dbi", "apb", "config";
|
||||
bus-range = <0x0 0xff>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
phys = <&pcie_phy>;
|
||||
ranges = <0x02000000 0x0 0x00000000
|
||||
0x0 0xf6000000
|
||||
0x0 0x02000000>;
|
||||
num-lanes = <1>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "msi";
|
||||
interrupt-map-mask = <0 0 0 7>;
|
||||
interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
|
||||
reset-gpios = <&gpio7 0 0>;
|
||||
hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>;
|
||||
pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
|
||||
reg = <0 0 0 0 0>;
|
||||
compatible = "pciclass,0604";
|
||||
device_type = "pci";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
pcie@0,0 { // Lane 0: upstream
|
||||
reg = <0 0 0 0 0>;
|
||||
compatible = "pciclass,0604";
|
||||
device_type = "pci";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
pcie@1,0 { // Lane 4: M.2
|
||||
reg = <0x0800 0 0 0 0>;
|
||||
compatible = "pciclass,0604";
|
||||
device_type = "pci";
|
||||
reset-gpios = <&gpio3 1 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
};
|
||||
|
||||
pcie@5,0 { // Lane 5: Mini PCIe
|
||||
reg = <0x2800 0 0 0 0>;
|
||||
compatible = "pciclass,0604";
|
||||
device_type = "pci";
|
||||
reset-gpios = <&gpio27 4 0 >;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
};
|
||||
|
||||
pcie@7,0 { // Lane 6: Ethernet
|
||||
reg = <0x03800 0 0 0 0>;
|
||||
compatible = "pciclass,0604";
|
||||
device_type = "pci";
|
||||
reset-gpios = <&gpio25 2 0 >;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -3,7 +3,7 @@ HiSilicon STB PCIe host bridge DT description
|
|||
The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
|
||||
It shares common functions with the DesignWare PCIe core driver and inherits
|
||||
common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
|
||||
|
||||
Additional properties are described here:
|
||||
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
|
|||
title: PCIe RC controller on Intel Gateway SoCs
|
||||
|
||||
maintainers:
|
||||
- Dilip Kota <eswara.kota@linux.intel.com>
|
||||
- Rahul Tanwar <rtanwar@maxlinear.com>
|
||||
|
||||
select:
|
||||
properties:
|
||||
|
|
@ -17,21 +17,15 @@ select:
|
|||
required:
|
||||
- compatible
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/snps,dw-pcie.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
items:
|
||||
- const: intel,lgm-pcie
|
||||
- const: snps,dw-pcie
|
||||
|
||||
device_type:
|
||||
const: pci
|
||||
|
||||
"#address-cells":
|
||||
const: 3
|
||||
|
||||
"#size-cells":
|
||||
const: 2
|
||||
|
||||
reg:
|
||||
items:
|
||||
- description: Controller control and status registers.
|
||||
|
|
@ -62,30 +56,13 @@ properties:
|
|||
reset-gpios:
|
||||
maxItems: 1
|
||||
|
||||
linux,pci-domain: true
|
||||
|
||||
num-lanes:
|
||||
maximum: 2
|
||||
description: Number of lanes to use for this port.
|
||||
|
||||
'#interrupt-cells':
|
||||
const: 1
|
||||
|
||||
interrupt-map-mask:
|
||||
description: Standard PCI IRQ mapping properties.
|
||||
|
||||
interrupt-map:
|
||||
description: Standard PCI IRQ mapping properties.
|
||||
|
||||
max-link-speed:
|
||||
description: Specify PCI Gen for link capability.
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [1, 2, 3, 4]
|
||||
default: 1
|
||||
|
||||
bus-range:
|
||||
description: Range of bus numbers associated with this controller.
|
||||
|
||||
reset-assert-ms:
|
||||
description: |
|
||||
Delay after asserting reset to the PCIe device.
|
||||
|
|
@ -94,9 +71,6 @@ properties:
|
|||
|
||||
required:
|
||||
- compatible
|
||||
- device_type
|
||||
- "#address-cells"
|
||||
- "#size-cells"
|
||||
- reg
|
||||
- reg-names
|
||||
- ranges
|
||||
|
|
@ -109,7 +83,7 @@ required:
|
|||
- interrupt-map
|
||||
- interrupt-map-mask
|
||||
|
||||
additionalProperties: false
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
|
|
|
|||
|
|
@ -1,50 +0,0 @@
|
|||
HiSilicon Kirin SoCs PCIe host DT description
|
||||
|
||||
Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
|
||||
It shares common functions with the PCIe DesignWare core driver and
|
||||
inherits common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
|
||||
Additional properties are described here:
|
||||
|
||||
Required properties
|
||||
- compatible:
|
||||
"hisilicon,kirin960-pcie" for PCIe of Kirin960 SoC
|
||||
- reg: Should contain rc_dbi, apb, phy, config registers location and length.
|
||||
- reg-names: Must include the following entries:
|
||||
"dbi": controller configuration registers;
|
||||
"apb": apb Ctrl register defined by Kirin;
|
||||
"phy": apb PHY register defined by Kirin;
|
||||
"config": PCIe configuration space registers.
|
||||
- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
|
||||
|
||||
Optional properties:
|
||||
|
||||
Example based on kirin960:
|
||||
|
||||
pcie@f4000000 {
|
||||
compatible = "hisilicon,kirin-pcie";
|
||||
reg = <0x0 0xf4000000 0x0 0x1000>, <0x0 0xff3fe000 0x0 0x1000>,
|
||||
<0x0 0xf3f20000 0x0 0x40000>, <0x0 0xF4000000 0 0x2000>;
|
||||
reg-names = "dbi","apb","phy", "config";
|
||||
bus-range = <0x0 0x1>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
device_type = "pci";
|
||||
ranges = <0x02000000 0x0 0x00000000 0x0 0xf5000000 0x0 0x2000000>;
|
||||
num-lanes = <1>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <0x0 0 0 1 &gic 0 0 0 282 4>,
|
||||
<0x0 0 0 2 &gic 0 0 0 283 4>,
|
||||
<0x0 0 0 3 &gic 0 0 0 284 4>,
|
||||
<0x0 0 0 4 &gic 0 0 0 285 4>;
|
||||
clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
|
||||
<&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
|
||||
<&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
|
||||
<&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
|
||||
<&crg_ctrl HI3660_ACLK_GATE_PCIE>;
|
||||
clock-names = "pcie_phy_ref", "pcie_aux",
|
||||
"pcie_apb_phy", "pcie_apb_sys", "pcie_aclk";
|
||||
reset-gpios = <&gpio11 1 0 >;
|
||||
};
|
||||
|
|
@ -1,7 +1,7 @@
|
|||
Freescale Layerscape PCIe controller
|
||||
|
||||
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||||
and thus inherits all the common properties defined in designware-pcie.txt.
|
||||
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
||||
|
||||
This controller derives its clocks from the Reset Configuration Word (RCW)
|
||||
which is used to describe the PLL settings at the time of chip-reset.
|
||||
|
|
|
|||
|
|
@ -17,10 +17,10 @@ allOf:
|
|||
|
||||
properties:
|
||||
compatible:
|
||||
oneOf:
|
||||
- const: loongson,ls2k-pci
|
||||
- const: loongson,ls7a-pci
|
||||
- const: loongson,rs780e-pci
|
||||
enum:
|
||||
- loongson,ls2k-pci
|
||||
- loongson,ls7a-pci
|
||||
- loongson,rs780e-pci
|
||||
|
||||
reg:
|
||||
minItems: 1
|
||||
|
|
|
|||
|
|
@ -1,7 +1,8 @@
|
|||
NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
|
||||
|
||||
This PCIe controller is based on the Synopsis Designware PCIe IP
|
||||
and thus inherits all the common properties defined in designware-pcie.txt.
|
||||
and thus inherits all the common properties defined in snps,dw-pcie.yaml and
|
||||
snps,dw-pcie-ep.yaml.
|
||||
Some of the controller instances are dual mode where in they can work either
|
||||
in root port mode or endpoint mode but one at a time.
|
||||
|
||||
|
|
@ -22,7 +23,7 @@ Required properties:
|
|||
property.
|
||||
- reg-names: Must include the following entries:
|
||||
"appl": Controller's application logic registers
|
||||
"config": As per the definition in designware-pcie.txt
|
||||
"config": As per the definition in snps,dw-pcie.yaml
|
||||
"atu_dma": iATU and DMA registers. This is where the iATU (internal Address
|
||||
Translation Unit) registers of the PCIe core are made available
|
||||
for SW access.
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
* Marvell Armada 7K/8K PCIe interface
|
||||
|
||||
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
||||
and thus inherits all the common properties defined in designware-pcie.txt.
|
||||
and thus inherits all the common properties defined in snps,dw-pcie.yaml.
|
||||
|
||||
Required properties:
|
||||
- compatible: "marvell,armada8k-pcie"
|
||||
|
|
|
|||
|
|
@ -2,7 +2,7 @@
|
|||
|
||||
Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
|
||||
PCI core. It inherits common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
|
||||
|
||||
Properties of the host controller node that differ from it are:
|
||||
|
||||
|
|
|
|||
|
|
@ -34,22 +34,22 @@
|
|||
- device_type:
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Should be "pci". As specified in designware-pcie.txt
|
||||
Definition: Should be "pci". As specified in snps,dw-pcie.yaml
|
||||
|
||||
- #address-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should be 3. As specified in designware-pcie.txt
|
||||
Definition: Should be 3. As specified in snps,dw-pcie.yaml
|
||||
|
||||
- #size-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should be 2. As specified in designware-pcie.txt
|
||||
Definition: Should be 2. As specified in snps,dw-pcie.yaml
|
||||
|
||||
- ranges:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: As specified in designware-pcie.txt
|
||||
Definition: As specified in snps,dw-pcie.yaml
|
||||
|
||||
- interrupts:
|
||||
Usage: required
|
||||
|
|
@ -64,17 +64,17 @@
|
|||
- #interrupt-cells:
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Should be 1. As specified in designware-pcie.txt
|
||||
Definition: Should be 1. As specified in snps,dw-pcie.yaml
|
||||
|
||||
- interrupt-map-mask:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: As specified in designware-pcie.txt
|
||||
Definition: As specified in snps,dw-pcie.yaml
|
||||
|
||||
- interrupt-map:
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: As specified in designware-pcie.txt
|
||||
Definition: As specified in snps,dw-pcie.yaml
|
||||
|
||||
- clocks:
|
||||
Usage: required
|
||||
|
|
|
|||
|
|
@ -13,10 +13,10 @@ maintainers:
|
|||
description: |+
|
||||
Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
|
||||
PCIe IP and thus inherits all the common properties defined in
|
||||
designware-pcie.txt.
|
||||
snps,dw-pcie.yaml.
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-bus.yaml#
|
||||
- $ref: /schemas/pci/snps,dw-pcie.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -10,14 +10,14 @@ description: |+
|
|||
SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
|
||||
PCI core. It shares common features with the PCIe DesignWare core and
|
||||
inherits common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
|
||||
|
||||
maintainers:
|
||||
- Paul Walmsley <paul.walmsley@sifive.com>
|
||||
- Greentime Hu <greentime.hu@sifive.com>
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-bus.yaml#
|
||||
- $ref: /schemas/pci/snps,dw-pcie.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
90
Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
Normal file
90
Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
Normal file
|
|
@ -0,0 +1,90 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Synopsys DesignWare PCIe endpoint interface
|
||||
|
||||
maintainers:
|
||||
- Jingoo Han <jingoohan1@gmail.com>
|
||||
- Gustavo Pimentel <gustavo.pimentel@synopsys.com>
|
||||
|
||||
description: |
|
||||
Synopsys DesignWare PCIe host controller endpoint
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-ep.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
anyOf:
|
||||
- {}
|
||||
- const: snps,dw-pcie-ep
|
||||
|
||||
reg:
|
||||
description: |
|
||||
It should contain Data Bus Interface (dbi) and config registers for all
|
||||
versions.
|
||||
For designware core version >= 4.80, it may contain ATU address space.
|
||||
minItems: 2
|
||||
maxItems: 4
|
||||
|
||||
reg-names:
|
||||
minItems: 2
|
||||
maxItems: 4
|
||||
items:
|
||||
enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
|
||||
|
||||
reset-gpio:
|
||||
description: GPIO pin number of PERST# signal
|
||||
maxItems: 1
|
||||
deprecated: true
|
||||
|
||||
reset-gpios:
|
||||
description: GPIO controlled connection to PERST# signal
|
||||
maxItems: 1
|
||||
|
||||
snps,enable-cdm-check:
|
||||
type: boolean
|
||||
description: |
|
||||
This is a boolean property and if present enables
|
||||
automatic checking of CDM (Configuration Dependent Module) registers
|
||||
for data corruption. CDM registers include standard PCIe configuration
|
||||
space registers, Port Logic registers, DMA and iATU (internal Address
|
||||
Translation Unit) registers.
|
||||
|
||||
num-ib-windows:
|
||||
description: number of inbound address translation windows
|
||||
maxItems: 1
|
||||
deprecated: true
|
||||
|
||||
num-ob-windows:
|
||||
description: number of outbound address translation windows
|
||||
maxItems: 1
|
||||
deprecated: true
|
||||
|
||||
max-functions:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
description: maximum number of functions that can be configured
|
||||
|
||||
required:
|
||||
- reg
|
||||
- reg-names
|
||||
- compatible
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
pcie-ep@dfd00000 {
|
||||
compatible = "snps,dw-pcie-ep";
|
||||
reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
|
||||
<0xdfc01000 0x0001000>, /* IP registers 2 */
|
||||
<0xd0000000 0x2000000>; /* Configuration space */
|
||||
reg-names = "dbi", "dbi2", "addr_space";
|
||||
};
|
||||
};
|
||||
102
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
Normal file
102
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
Normal file
|
|
@ -0,0 +1,102 @@
|
|||
# SPDX-License-Identifier: GPL-2.0
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Synopsys DesignWare PCIe interface
|
||||
|
||||
maintainers:
|
||||
- Jingoo Han <jingoohan1@gmail.com>
|
||||
- Gustavo Pimentel <gustavo.pimentel@synopsys.com>
|
||||
|
||||
description: |
|
||||
Synopsys DesignWare PCIe host controller
|
||||
|
||||
allOf:
|
||||
- $ref: /schemas/pci/pci-bus.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
anyOf:
|
||||
- {}
|
||||
- const: snps,dw-pcie
|
||||
|
||||
reg:
|
||||
description: |
|
||||
It should contain Data Bus Interface (dbi) and config registers for all
|
||||
versions.
|
||||
For designware core version >= 4.80, it may contain ATU address space.
|
||||
minItems: 2
|
||||
maxItems: 5
|
||||
|
||||
reg-names:
|
||||
minItems: 2
|
||||
maxItems: 5
|
||||
items:
|
||||
enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link,
|
||||
ulreg, smu, mpu, apb, phy ]
|
||||
|
||||
num-lanes:
|
||||
description: |
|
||||
number of lanes to use (this property should be specified unless
|
||||
the link is brought already up in firmware)
|
||||
maximum: 16
|
||||
|
||||
reset-gpio:
|
||||
description: GPIO pin number of PERST# signal
|
||||
maxItems: 1
|
||||
deprecated: true
|
||||
|
||||
reset-gpios:
|
||||
description: GPIO controlled connection to PERST# signal
|
||||
maxItems: 1
|
||||
|
||||
interrupts: true
|
||||
|
||||
interrupt-names: true
|
||||
|
||||
clocks: true
|
||||
|
||||
snps,enable-cdm-check:
|
||||
type: boolean
|
||||
description: |
|
||||
This is a boolean property and if present enables
|
||||
automatic checking of CDM (Configuration Dependent Module) registers
|
||||
for data corruption. CDM registers include standard PCIe configuration
|
||||
space registers, Port Logic registers, DMA and iATU (internal Address
|
||||
Translation Unit) registers.
|
||||
|
||||
num-viewport:
|
||||
description: |
|
||||
number of view ports configured in hardware. If a platform
|
||||
does not specify it, the driver autodetects it.
|
||||
deprecated: true
|
||||
|
||||
unevaluatedProperties: false
|
||||
|
||||
required:
|
||||
- reg
|
||||
- reg-names
|
||||
- compatible
|
||||
|
||||
examples:
|
||||
- |
|
||||
bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
pcie@dfc00000 {
|
||||
device_type = "pci";
|
||||
compatible = "snps,dw-pcie";
|
||||
reg = <0xdfc00000 0x0001000>, /* IP registers */
|
||||
<0xd0000000 0x0002000>; /* Configuration space */
|
||||
reg-names = "dbi", "config";
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
|
||||
<0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
|
||||
interrupts = <25>, <24>;
|
||||
#interrupt-cells = <1>;
|
||||
num-lanes = <1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -10,13 +10,13 @@ description: |
|
|||
UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
|
||||
PCI core. It shares common features with the PCIe DesignWare core and
|
||||
inherits common properties defined in
|
||||
Documentation/devicetree/bindings/pci/designware-pcie.txt.
|
||||
Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml.
|
||||
|
||||
maintainers:
|
||||
- Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "pci-ep.yaml#"
|
||||
- $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@ PCIe DesignWare Controller
|
|||
number of PHYs as specified in *phys* property.
|
||||
- ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
|
||||
where <X> is the instance number of the pcie from the HW spec.
|
||||
- num-lanes as specified in ../designware-pcie.txt
|
||||
- num-lanes as specified in ../snps,dw-pcie.yaml
|
||||
- ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
|
||||
module and the register offset to specify lane
|
||||
selection.
|
||||
|
|
@ -32,7 +32,7 @@ HOST MODE
|
|||
device_type,
|
||||
ranges,
|
||||
interrupt-map-mask,
|
||||
interrupt-map : as specified in ../designware-pcie.txt
|
||||
interrupt-map : as specified in ../snps,dw-pcie.yaml
|
||||
- ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
|
||||
should contain the register offset within syscon
|
||||
and the 2nd argument should contain the bit field
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show more
Loading…
Reference in a new issue