diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h index e8f802a82300..36edbaff4f7f 100644 --- a/drivers/iio/accel/bma400.h +++ b/drivers/iio/accel/bma400.h @@ -40,6 +40,7 @@ #define BMA400_INT_STAT1_REG 0x0f #define BMA400_INT_STAT2_REG 0x10 #define BMA400_INT12_MAP_REG 0x23 +#define BMA400_INT_ENG_OVRUN_MSK BIT(4) /* Temperature register */ #define BMA400_TEMP_DATA_REG 0x11 @@ -105,6 +106,19 @@ #define BMA400_INT_GEN2_MSK BIT(3) #define BMA400_GEN_HYST_MSK GENMASK(1, 0) +/* TAP config registers */ +#define BMA400_TAP_CONFIG 0x57 +#define BMA400_TAP_CONFIG1 0x58 +#define BMA400_S_TAP_MSK BIT(2) +#define BMA400_D_TAP_MSK BIT(3) +#define BMA400_INT_S_TAP_MSK BIT(10) +#define BMA400_INT_D_TAP_MSK BIT(11) +#define BMA400_TAP_SEN_MSK GENMASK(2, 0) +#define BMA400_TAP_TICSTH_MSK GENMASK(1, 0) +#define BMA400_TAP_QUIET_MSK GENMASK(3, 2) +#define BMA400_TAP_QUIETDT_MSK GENMASK(5, 4) +#define BMA400_TAP_TIM_LIST_LEN 4 + /* * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before * converting to micro values for +-2g range. diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c index c31bdd9b168e..eceb1f8d338d 100644 --- a/drivers/iio/accel/bma400_core.c +++ b/drivers/iio/accel/bma400_core.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,27 @@ static int bma400_sample_freqs[14]; static const int bma400_osr_range[] = { 0, 1, 3 }; +static int tap_reset_timeout[BMA400_TAP_TIM_LIST_LEN] = { + 300000, + 400000, + 500000, + 600000 +}; + +static int tap_max2min_time[BMA400_TAP_TIM_LIST_LEN] = { + 30000, + 45000, + 60000, + 90000 +}; + +static int double_tap2_min_delay[BMA400_TAP_TIM_LIST_LEN] = { + 20000, + 40000, + 60000, + 80000 +}; + /* See the ACC_CONFIG0 section of the datasheet */ enum bma400_power_mode { POWER_MODE_SLEEP = 0x00, @@ -88,6 +110,7 @@ struct bma400_data { bool step_event_en; bool activity_event_en; unsigned int generic_event_en; + unsigned int tap_event_en_bitmask; /* Correct time stamp alignment */ struct { __le16 buff[3]; @@ -216,6 +239,115 @@ static const struct iio_event_spec bma400_accel_event[] = { BIT(IIO_EV_INFO_HYSTERESIS) | BIT(IIO_EV_INFO_ENABLE), }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_SINGLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT), + }, + { + .type = IIO_EV_TYPE_GESTURE, + .dir = IIO_EV_DIR_DOUBLETAP, + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_ENABLE) | + BIT(IIO_EV_INFO_RESET_TIMEOUT) | + BIT(IIO_EV_INFO_TAP2_MIN_DELAY), + }, +}; + +static int usec_to_tapreg_raw(int usec, const int *time_list) +{ + int index; + + for (index = 0; index < BMA400_TAP_TIM_LIST_LEN; index++) { + if (usec == time_list[index]) + return index; + } + return -EINVAL; +} + +static ssize_t in_accel_gesture_tap_maxtomin_time_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bma400_data *data = iio_priv(indio_dev); + int ret, reg_val, raw, vals[2]; + + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_TICSTH_MSK, reg_val); + vals[0] = 0; + vals[1] = tap_max2min_time[raw]; + + return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals); +} + +static ssize_t in_accel_gesture_tap_maxtomin_time_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bma400_data *data = iio_priv(indio_dev); + int ret, val_int, val_fract, raw; + + ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract); + if (ret) + return ret; + + raw = usec_to_tapreg_raw(val_fract, tap_max2min_time); + if (raw < 0) + return -EINVAL; + + ret = regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1, + BMA400_TAP_TICSTH_MSK, + FIELD_PREP(BMA400_TAP_TICSTH_MSK, raw)); + if (ret) + return ret; + + return len; +} + +static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_maxtomin_time, 0); + +/* + * Tap interrupts works with 200 Hz input data rate and the time based tap + * controls are in the terms of data samples so the below calculation is + * used to convert the configuration values into seconds. + * e.g.: + * 60 data samples * 0.005 ms = 0.3 seconds. + * 80 data samples * 0.005 ms = 0.4 seconds. + */ + +/* quiet configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available, + "0.3 0.4 0.5 0.6"); + +/* tics_th configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_tap_maxtomin_time_available, + "0.03 0.045 0.06 0.09"); + +/* quiet_dt configuration values in seconds */ +static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available, + "0.02 0.04 0.06 0.08"); + +/* List of sensitivity values available to configure tap interrupts */ +static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "0 1 2 3 4 5 6 7"); + +static struct attribute *bma400_event_attributes[] = { + &iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_tap_maxtomin_time_available.dev_attr.attr, + &iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr, + &iio_dev_attr_in_accel_gesture_tap_maxtomin_time.dev_attr.attr, + NULL +}; + +static const struct attribute_group bma400_event_attribute_group = { + .attrs = bma400_event_attributes, }; #define BMA400_ACC_CHANNEL(_index, _axis) { \ @@ -1012,6 +1144,12 @@ static int bma400_read_event_config(struct iio_dev *indio_dev, case IIO_EV_DIR_FALLING: return FIELD_GET(BMA400_INT_GEN2_MSK, data->generic_event_en); + case IIO_EV_DIR_SINGLETAP: + return FIELD_GET(BMA400_S_TAP_MSK, + data->tap_event_en_bitmask); + case IIO_EV_DIR_DOUBLETAP: + return FIELD_GET(BMA400_D_TAP_MSK, + data->tap_event_en_bitmask); default: return -EINVAL; } @@ -1101,6 +1239,80 @@ static int bma400_activity_event_en(struct bma400_data *data, return 0; } +static int bma400_tap_event_en(struct bma400_data *data, + enum iio_event_direction dir, int state) +{ + unsigned int mask, field_value; + int ret; + + /* + * Tap interrupts can be configured only in normal mode. + * See table in section 4.3 "Power modes - performance modes" of + * datasheet v1.2. + */ + if (data->power_mode != POWER_MODE_NORMAL) + return -EINVAL; + + /* + * Tap interrupts are operating with a data rate of 200Hz. + * See section 4.7 "Tap sensing interrupt" in datasheet v1.2. + */ + if (data->sample_freq.hz != 200 && state) { + dev_err(data->dev, "Invalid data rate for tap interrupts.\n"); + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG, + BMA400_S_TAP_MSK, + FIELD_PREP(BMA400_S_TAP_MSK, state)); + if (ret) + return ret; + + switch (dir) { + case IIO_EV_DIR_SINGLETAP: + mask = BMA400_S_TAP_MSK; + set_mask_bits(&field_value, BMA400_S_TAP_MSK, + FIELD_PREP(BMA400_S_TAP_MSK, state)); + break; + case IIO_EV_DIR_DOUBLETAP: + mask = BMA400_D_TAP_MSK; + set_mask_bits(&field_value, BMA400_D_TAP_MSK, + FIELD_PREP(BMA400_D_TAP_MSK, state)); + break; + default: + return -EINVAL; + } + + ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, mask, + field_value); + if (ret) + return ret; + + set_mask_bits(&data->tap_event_en_bitmask, mask, field_value); + + return 0; +} + +static int bma400_disable_adv_interrupt(struct bma400_data *data) +{ + int ret; + + ret = regmap_write(data->regmap, BMA400_INT_CONFIG0_REG, 0); + if (ret) + return ret; + + ret = regmap_write(data->regmap, BMA400_INT_CONFIG1_REG, 0); + if (ret) + return ret; + + data->tap_event_en_bitmask = 0; + data->generic_event_en = 0; + data->step_event_en = false; + data->activity_event_en = false; + + return 0; +} + static int bma400_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, @@ -1111,10 +1323,20 @@ static int bma400_write_event_config(struct iio_dev *indio_dev, switch (chan->type) { case IIO_ACCEL: - mutex_lock(&data->mutex); - ret = bma400_activity_event_en(data, dir, state); - mutex_unlock(&data->mutex); - return ret; + switch (type) { + case IIO_EV_TYPE_MAG: + mutex_lock(&data->mutex); + ret = bma400_activity_event_en(data, dir, state); + mutex_unlock(&data->mutex); + return ret; + case IIO_EV_TYPE_GESTURE: + mutex_lock(&data->mutex); + ret = bma400_tap_event_en(data, dir, state); + mutex_unlock(&data->mutex); + return ret; + default: + return -EINVAL; + } case IIO_STEPS: mutex_lock(&data->mutex); ret = bma400_steps_event_enable(data, state); @@ -1157,10 +1379,13 @@ static int bma400_read_event_value(struct iio_dev *indio_dev, int *val, int *val2) { struct bma400_data *data = iio_priv(indio_dev); - int ret, reg; + int ret, reg, reg_val, raw; - switch (chan->type) { - case IIO_ACCEL: + if (chan->type != IIO_ACCEL) + return -EINVAL; + + switch (type) { + case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; @@ -1196,6 +1421,39 @@ static int bma400_read_event_value(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG, + ®_val); + if (ret) + return ret; + + *val = FIELD_GET(BMA400_TAP_SEN_MSK, reg_val); + return IIO_VAL_INT; + case IIO_EV_INFO_RESET_TIMEOUT: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, + ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_QUIET_MSK, reg_val); + *val = 0; + *val2 = tap_reset_timeout[raw]; + return IIO_VAL_INT_PLUS_MICRO; + case IIO_EV_INFO_TAP2_MIN_DELAY: + ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, + ®_val); + if (ret) + return ret; + + raw = FIELD_GET(BMA400_TAP_QUIETDT_MSK, reg_val); + *val = 0; + *val2 = double_tap2_min_delay[raw]; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } default: return -EINVAL; } @@ -1209,10 +1467,13 @@ static int bma400_write_event_value(struct iio_dev *indio_dev, int val, int val2) { struct bma400_data *data = iio_priv(indio_dev); - int reg, ret; + int reg, ret, raw; - switch (chan->type) { - case IIO_ACCEL: + if (chan->type != IIO_ACCEL) + return -EINVAL; + + switch (type) { + case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; @@ -1248,6 +1509,40 @@ static int bma400_write_event_value(struct iio_dev *indio_dev, default: return -EINVAL; } + case IIO_EV_TYPE_GESTURE: + switch (info) { + case IIO_EV_INFO_VALUE: + if (val < 0 || val > 7) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG, + BMA400_TAP_SEN_MSK, + FIELD_PREP(BMA400_TAP_SEN_MSK, + val)); + case IIO_EV_INFO_RESET_TIMEOUT: + raw = usec_to_tapreg_raw(val2, tap_reset_timeout); + if (raw < 0) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG1, + BMA400_TAP_QUIET_MSK, + FIELD_PREP(BMA400_TAP_QUIET_MSK, + raw)); + case IIO_EV_INFO_TAP2_MIN_DELAY: + raw = usec_to_tapreg_raw(val2, double_tap2_min_delay); + if (raw < 0) + return -EINVAL; + + return regmap_update_bits(data->regmap, + BMA400_TAP_CONFIG1, + BMA400_TAP_QUIETDT_MSK, + FIELD_PREP(BMA400_TAP_QUIETDT_MSK, + raw)); + default: + return -EINVAL; + } default: return -EINVAL; } @@ -1287,6 +1582,7 @@ static const struct iio_info bma400_info = { .write_event_config = bma400_write_event_config, .write_event_value = bma400_write_event_value, .read_event_value = bma400_read_event_value, + .event_attrs = &bma400_event_attribute_group, }; static const struct iio_trigger_ops bma400_trigger_ops = { @@ -1350,6 +1646,32 @@ static irqreturn_t bma400_interrupt(int irq, void *private) if (ret || !data->status) goto unlock_err; + /* + * Disable all advance interrupts if interrupt engine overrun occurs. + * See section 4.7 "Interrupt engine overrun" in datasheet v1.2. + */ + if (FIELD_GET(BMA400_INT_ENG_OVRUN_MSK, le16_to_cpu(data->status))) { + bma400_disable_adv_interrupt(data); + dev_err(data->dev, "Interrupt engine overrun\n"); + goto unlock_err; + } + + if (FIELD_GET(BMA400_INT_S_TAP_MSK, le16_to_cpu(data->status))) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_SINGLETAP), + timestamp); + + if (FIELD_GET(BMA400_INT_D_TAP_MSK, le16_to_cpu(data->status))) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_OR_Y_OR_Z, + IIO_EV_TYPE_GESTURE, + IIO_EV_DIR_DOUBLETAP), + timestamp); + if (FIELD_GET(BMA400_INT_GEN1_MSK, le16_to_cpu(data->status))) ev_dir = IIO_EV_DIR_RISING; @@ -1467,5 +1789,6 @@ int bma400_probe(struct device *dev, struct regmap *regmap, int irq, EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400); MODULE_AUTHOR("Dan Robertson "); +MODULE_AUTHOR("Jagath Jog J "); MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core"); MODULE_LICENSE("GPL");