From 89aa3619d141d6cfb6040a561aebb6d99d3e2285 Mon Sep 17 00:00:00 2001 From: Ondrej Mosnacek Date: Fri, 7 Jun 2024 18:07:53 +0200 Subject: [PATCH] cipso: make cipso_v4_skbuff_delattr() fully remove the CIPSO options As the comment in this function says, the code currently just clears the CIPSO part with IPOPT_NOP, rather than removing it completely and trimming the packet. The other cipso_v4_*_delattr() functions, however, do the proper removal and also calipso_skbuff_delattr() makes an effort to remove the CALIPSO options instead of replacing them with padding. Some routers treat IPv4 packets with anything (even NOPs) in the option header as a special case and take them through a slower processing path. Consequently, hardening guides such as STIG recommend to configure such routers to drop packets with non-empty IP option headers [1][2]. Thus, users might expect NetLabel to produce packets with minimal padding (or at least with no padding when no actual options are present). Implement the proper option removal to address this and to be closer to what the peer functions do. [1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937 [2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001 Signed-off-by: Ondrej Mosnacek Signed-off-by: David S. Miller --- net/ipv4/cipso_ipv4.c | 79 +++++++++++++++++++++++++++++-------------- 1 file changed, 54 insertions(+), 25 deletions(-) diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c index 5e9ac68444f8..e9cb27061c12 100644 --- a/net/ipv4/cipso_ipv4.c +++ b/net/ipv4/cipso_ipv4.c @@ -1810,6 +1810,29 @@ static int cipso_v4_genopt(unsigned char *buf, u32 buf_len, return CIPSO_V4_HDR_LEN + ret_val; } +static int cipso_v4_get_actual_opt_len(const unsigned char *data, int len) +{ + int iter = 0, optlen = 0; + + /* determining the new total option length is tricky because of + * the padding necessary, the only thing i can think to do at + * this point is walk the options one-by-one, skipping the + * padding at the end to determine the actual option size and + * from there we can determine the new total option length + */ + while (iter < len) { + if (data[iter] == IPOPT_END) { + break; + } else if (data[iter] == IPOPT_NOP) { + iter++; + } else { + iter += data[iter + 1]; + optlen = iter; + } + } + return optlen; +} + /** * cipso_v4_sock_setattr - Add a CIPSO option to a socket * @sk: the socket @@ -1986,7 +2009,6 @@ static int cipso_v4_delopt(struct ip_options_rcu __rcu **opt_ptr) u8 cipso_len; u8 cipso_off; unsigned char *cipso_ptr; - int iter; int optlen_new; cipso_off = opt->opt.cipso - sizeof(struct iphdr); @@ -2006,23 +2028,8 @@ static int cipso_v4_delopt(struct ip_options_rcu __rcu **opt_ptr) memmove(cipso_ptr, cipso_ptr + cipso_len, opt->opt.optlen - cipso_off - cipso_len); - /* determining the new total option length is tricky because of - * the padding necessary, the only thing i can think to do at - * this point is walk the options one-by-one, skipping the - * padding at the end to determine the actual option size and - * from there we can determine the new total option length */ - iter = 0; - optlen_new = 0; - while (iter < opt->opt.optlen) { - if (opt->opt.__data[iter] == IPOPT_END) { - break; - } else if (opt->opt.__data[iter] == IPOPT_NOP) { - iter++; - } else { - iter += opt->opt.__data[iter + 1]; - optlen_new = iter; - } - } + optlen_new = cipso_v4_get_actual_opt_len(opt->opt.__data, + opt->opt.optlen); hdr_delta = opt->opt.optlen; opt->opt.optlen = (optlen_new + 3) & ~3; hdr_delta -= opt->opt.optlen; @@ -2242,7 +2249,8 @@ int cipso_v4_skbuff_setattr(struct sk_buff *skb, */ int cipso_v4_skbuff_delattr(struct sk_buff *skb) { - int ret_val; + int ret_val, cipso_len, hdr_len_actual, new_hdr_len_actual, new_hdr_len, + hdr_len_delta; struct iphdr *iph; struct ip_options *opt = &IPCB(skb)->opt; unsigned char *cipso_ptr; @@ -2255,16 +2263,37 @@ int cipso_v4_skbuff_delattr(struct sk_buff *skb) if (ret_val < 0) return ret_val; - /* the easiest thing to do is just replace the cipso option with noop - * options since we don't change the size of the packet, although we - * still need to recalculate the checksum */ - iph = ip_hdr(skb); cipso_ptr = (unsigned char *)iph + opt->cipso; - memset(cipso_ptr, IPOPT_NOOP, cipso_ptr[1]); + cipso_len = cipso_ptr[1]; + + hdr_len_actual = sizeof(struct iphdr) + + cipso_v4_get_actual_opt_len((unsigned char *)(iph + 1), + opt->optlen); + new_hdr_len_actual = hdr_len_actual - cipso_len; + new_hdr_len = (new_hdr_len_actual + 3) & ~3; + hdr_len_delta = (iph->ihl << 2) - new_hdr_len; + + /* 1. shift any options after CIPSO to the left */ + memmove(cipso_ptr, cipso_ptr + cipso_len, + new_hdr_len_actual - opt->cipso); + /* 2. move the whole IP header to its new place */ + memmove((unsigned char *)iph + hdr_len_delta, iph, new_hdr_len_actual); + /* 3. adjust the skb layout */ + skb_pull(skb, hdr_len_delta); + skb_reset_network_header(skb); + iph = ip_hdr(skb); + /* 4. re-fill new padding with IPOPT_END (may now be longer) */ + memset((unsigned char *)iph + new_hdr_len_actual, IPOPT_END, + new_hdr_len - new_hdr_len_actual); + + opt->optlen -= hdr_len_delta; opt->cipso = 0; opt->is_changed = 1; - + if (hdr_len_delta != 0) { + iph->ihl = new_hdr_len >> 2; + iph_set_totlen(iph, skb->len); + } ip_send_check(iph); return 0;