MIPS changes for 4.15

These are the main MIPS changes for 4.15.
 
 Fixes:
 - ralink: Fix MT7620 PCI build issues (4.5)
 - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
   (4.1)
 - Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
 - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
 - ralink: Fix MT7628 pinmux (3.19)
 - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
 - Fix n32 core dumping as o32 since regset support (3.13)
 - ralink: Drop obsolete USB_ARCH_HAS_HCD select
 
 Build system:
 - Default to "generic" (multiplatform) system type instead of IP22
 - Use generic little endian MIPS32 r2 configuration as default defconfig
   instead of ip22_defconfig
 
 FPU emulation:
 - Fix exception generation for certain R6 FPU instructions
 
 SMP:
 - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
   spaces
 
 Miscellaneous:
 - Add iomem resource for kernel bss section for kexec/kdump
 - Atomics: Nudge writes on bit unlock
 - DT files: Standardise "ok" -> "okay"
 
 Platform support:
 
  BMIPS:
  - Enable HARDIRQS_SW_RESEND
 
  Broadcom BCM63XX:
  - Add clkdev lookup support
  - Update clk driver, UART driver, DTs to handle named refclk from DTs
  - Split apart various clocks to more closely match hardware
  - Add ethernet clocks
 
  Cavium Octeon:
  - Remove usage of cvmx_wait() in favour of __delay()
 
  ImgTec Pistachio:
  - DT: Drop deprecated dwmmc num-slots property
 
  Ingenic JZ4780:
  - Add NFS root to Ci20 defconfig
  - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
    driver with this SoC
 
  Generic (multiplatform):
  - Migrate xilfpga (MIPSfpga) platform to the generic platform
 
  Lantiq xway:
  - Fix ASC0/ASC1 clocks
 
 Minor cleanups:
 - Define virt_to_pfn()
 - Make thread_saved_pc static
 - Simplify 32-bit sign extension in __read_64bit_c0_split()
 - DMA: Use vma_pages() helper
 - FPU emulation: Replace unsigned with unsigned int
 - MM: Removed unused lastpfn
 - Alchemy: Make clk_ops const
 - Lasat: Use setup_timer() helper
 - ralink: Use BIT() in MT7620 PCI driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAloJ8ecACgkQbAtpk944
 dnqF3w/+IPcxcYl7QpVFvM3MsDgxJI8ENIkY5ffMi1UVM8gApAHuFSnGotikS8C8
 jjnFyorrOkUKuuX9m9pfwfmvMHAy8j77so7kp2vpGjihe4iFntYJxJYUpYq8Ru8M
 jNzikrPbFv6eQyjwFEGuqxrJmsgTlJGiWA04a33LCfiFz5RZUSloHfPkjWiyWM1s
 xrbkbZpwvyX3jw39vguZvz5qjuUPViy/YOSyMhmTqnqDXqGmwlHgzev1/HEzISVe
 eN5n6bHGX5Dis4bCBPZuYbr6m96/z+xTKCKC7mlH0OnG/WWQtv9LFFU7o+ffRsI/
 nPKEN/TFFA7V0b9zI/lxfVSoZ67IZa5TDA+PLnzX9UQAxOA/wgFHPOgqJZN3/BXo
 OBgTuguwq9D22uSrvrMoqmcU+zDXG4ZQQCgv7mUUw2E9gHnsYJykhVa4kQVj9MxE
 LkixhhE+Qabsh6L3wDtBntpgoOd58dxNiMJ7UAzDW3rmyjo+EEWN1eeCxQCrewlf
 1aJaHeRoEOt/k7oPZWCd1InJ3vEsrNcO74KSZuQ+q0ytuqYOLUZ7ZXteA86VzroI
 4qcftvR4cVOCz86B6NZdQQVOM95P7vgqBMJqh52i1pjQlVdvE92MBgzbm4BSOUAL
 Y+hybhhIwJriF8WtTq2goL8osvMODM1uM3Zlm0XtA5JfUYbWK/E=
 =xbL0
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.15.

  Fixes:
   - ralink: Fix MT7620 PCI build issues (4.5)
   - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP
     (4.1)
   - Fix MIPS64 FP save/restore on 32-bit kernels (4.0)
   - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19)
   - ralink: Fix MT7628 pinmux (3.19)
   - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17)
   - Fix n32 core dumping as o32 since regset support (3.13)
   - ralink: Drop obsolete USB_ARCH_HAS_HCD select

  Build system:
   - Default to "generic" (multiplatform) system type instead of IP22
   - Use generic little endian MIPS32 r2 configuration as default
     defconfig instead of ip22_defconfig

  FPU emulation:
   - Fix exception generation for certain R6 FPU instructions

  SMP:
   - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id
     spaces

  Miscellaneous:
   - Add iomem resource for kernel bss section for kexec/kdump
   - Atomics: Nudge writes on bit unlock
   - DT files: Standardise "ok" -> "okay"

  Minor cleanups:
   - Define virt_to_pfn()
   - Make thread_saved_pc static
   - Simplify 32-bit sign extension in __read_64bit_c0_split()
   - DMA: Use vma_pages() helper
   - FPU emulation: Replace unsigned with unsigned int
   - MM: Removed unused lastpfn
   - Alchemy: Make clk_ops const
   - Lasat: Use setup_timer() helper
   - ralink: Use BIT() in MT7620 PCI driver

  Platform support:

  BMIPS:
  - Enable HARDIRQS_SW_RESEND

  Broadcom BCM63XX:
  - Add clkdev lookup support
  - Update clk driver, UART driver, DTs to handle named refclk from DTs
  - Split apart various clocks to more closely match hardware
  - Add ethernet clocks

  Cavium Octeon:
  - Remove usage of cvmx_wait() in favour of __delay()

  ImgTec Pistachio:
  - DT: Drop deprecated dwmmc num-slots property

  Ingenic JZ4780:
  - Add NFS root to Ci20 defconfig
  - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog
    driver with this SoC

  Generic (multiplatform):
  - Migrate xilfpga (MIPSfpga) platform to the generic platform

  Lantiq xway:
  - Fix ASC0/ASC1 clocks"

* tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits)
  MIPS: Add iomem resource for kernel bss section.
  MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP
  MIPS: BMIPS: Enable HARDIRQS_SW_RESEND
  MIPS: pci: Make use of the BIT() macro inside the mt7620 driver
  MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
  MIPS: pci: Remove duplicate define in mt7620 driver
  MIPS: ralink: Fix typo in mt7628 pinmux function
  MIPS: ralink: Fix MT7628 pinmux
  MIPS: Fix odd fp register warnings with MIPS64r2
  watchdog: jz4780: Allow selection of jz4740-wdt driver
  MIPS/ptrace: Update syscall nr on register changes
  MIPS/ptrace: Pick up ptrace/seccomp changed syscalls
  MIPS: Fix an n32 core file generation regset support regression
  MIPS: Fix MIPS64 FP save/restore on 32-bit kernels
  MIPS: page.h: Define virt_to_pfn()
  MIPS: Xilfpga: Switch to using generic defconfigs
  MIPS: generic: Add support for MIPSfpga
  MIPS: Set defconfig target to a generic system for 32r2el
  MIPS: Kconfig: Set default MIPS system type as generic
  MIPS: DTS: Remove num-slots from Pistachio SoC
  ...
This commit is contained in:
Linus Torvalds 2017-11-15 11:36:08 -08:00
commit 892204e06c
72 changed files with 514 additions and 436 deletions

View File

@ -11,6 +11,11 @@ Required properties:
- clocks: Clock driving the hardware; used to figure out the baud rate
divisor.
Optional properties:
- clock-names: Should be "refclk".
Example:
uart0: serial@14e00520 {
@ -19,6 +24,7 @@ Example:
interrupt-parent = <&periph_intc>;
interrupts = <2>;
clocks = <&periph_clk>;
clock-names = "refclk";
};
clocks {

View File

@ -34,7 +34,6 @@ platforms += sibyte
platforms += sni
platforms += txx9
platforms += vr41xx
platforms += xilfpga
# include the platform specific files
include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))

View File

@ -65,7 +65,7 @@ config MIPS
select HAVE_PERF_EVENTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_VIRT_CPU_ACCOUNTING_GEN
select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select MODULES_USE_ELF_REL if MODULES
@ -78,7 +78,7 @@ menu "Machine selection"
choice
prompt "System type"
default SGI_IP22
default MIPS_GENERIC
config MIPS_GENERIC
bool "Generic board-agnostic MIPS kernel"
@ -233,6 +233,7 @@ config BMIPS_GENERIC
select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
select HARDIRQS_SW_RESEND
help
Build a generic DT-based kernel image that boots on select
BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
@ -276,6 +277,7 @@ config BCM63XX
select GPIOLIB
select HAVE_CLK
select MIPS_L1_CACHE_SHIFT_4
select CLKDEV_LOOKUP
help
Support for BCM63XX based boards
@ -468,29 +470,6 @@ config MACH_PISTACHIO
help
This enables support for the IMG Pistachio SoC platform.
config MACH_XILFPGA
bool "MIPSfpga Xilinx based boards"
select BOOT_ELF32
select BOOT_RAW
select BUILTIN_DTB
select CEVT_R4K
select COMMON_CLK
select CSRC_R4K
select GPIOLIB
select IRQ_MIPS_CPU
select LIBFDT
select MIPS_CPU_SCACHE
select SYS_HAS_EARLY_PRINTK
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_SUPPORTS_ZBOOT_UART16550
select USE_OF
select USE_GENERIC_EARLY_PRINTK_8250
select XILINX_INTC
help
This enables support for the IMG University Program MIPSfpga platform.
config MIPS_MALTA
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
@ -916,7 +895,8 @@ config CAVIUM_OCTEON_SOC
select USE_OF
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_SMP
select NR_CPUS_DEFAULT_16
select NR_CPUS_DEFAULT_64
select MIPS_NR_CPU_NR_MAP_1024
select BUILTIN_DTB
select MTD_COMPLEX_MAPPINGS
select SYS_SUPPORTS_RELOCATABLE
@ -1034,7 +1014,6 @@ source "arch/mips/loongson32/Kconfig"
source "arch/mips/loongson64/Kconfig"
source "arch/mips/netlogic/Kconfig"
source "arch/mips/paravirt/Kconfig"
source "arch/mips/xilfpga/Kconfig"
endmenu
@ -2726,6 +2705,15 @@ config NR_CPUS
config MIPS_PERF_SHARED_TC_COUNTERS
bool
config MIPS_NR_CPU_NR_MAP_1024
bool
config MIPS_NR_CPU_NR_MAP
int
depends on SMP
default 1024 if MIPS_NR_CPU_NR_MAP_1024
default NR_CPUS if !MIPS_NR_CPU_NR_MAP_1024
#
# Timer Interrupt Frequency Configuration
#

View File

@ -15,7 +15,7 @@
archscripts: scripts_basic
$(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs
KBUILD_DEFCONFIG := ip22_defconfig
KBUILD_DEFCONFIG := 32r2el_defconfig
#
# Select the object file format to substitute into the linker script.
@ -544,3 +544,7 @@ sead3_defconfig:
.PHONY: sead3micro_defconfig
sead3micro_defconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile micro32r2el_defconfig BOARDS=sead-3
.PHONY: xilfpga_defconfig
xilfpga_defconfig:
$(Q)$(MAKE) -f $(srctree)/Makefile 32r2el_defconfig BOARDS=xilfpga

View File

@ -143,7 +143,7 @@ void __init alchemy_set_lpj(void)
preset_lpj /= 2 * HZ;
}
static struct clk_ops alchemy_clkops_cpu = {
static const struct clk_ops alchemy_clkops_cpu = {
.recalc_rate = alchemy_clk_cpu_recalc,
};
@ -224,7 +224,7 @@ static long alchemy_clk_aux_roundr(struct clk_hw *hw,
return (*parent_rate) * mult;
}
static struct clk_ops alchemy_clkops_aux = {
static const struct clk_ops alchemy_clkops_aux = {
.recalc_rate = alchemy_clk_aux_recalc,
.set_rate = alchemy_clk_aux_setr,
.round_rate = alchemy_clk_aux_roundr,
@ -576,7 +576,7 @@ static int alchemy_clk_fgv1_detr(struct clk_hw *hw,
}
/* Au1000, Au1100, Au15x0, Au12x0 */
static struct clk_ops alchemy_clkops_fgenv1 = {
static const struct clk_ops alchemy_clkops_fgenv1 = {
.recalc_rate = alchemy_clk_fgv1_recalc,
.determine_rate = alchemy_clk_fgv1_detr,
.set_rate = alchemy_clk_fgv1_setr,
@ -717,7 +717,7 @@ static int alchemy_clk_fgv2_detr(struct clk_hw *hw,
}
/* Au1300 larger input mux, no separate disable bit, flexible divider */
static struct clk_ops alchemy_clkops_fgenv2 = {
static const struct clk_ops alchemy_clkops_fgenv2 = {
.recalc_rate = alchemy_clk_fgv2_recalc,
.determine_rate = alchemy_clk_fgv2_detr,
.set_rate = alchemy_clk_fgv2_setr,
@ -925,7 +925,7 @@ static int alchemy_clk_csrc_detr(struct clk_hw *hw,
return alchemy_clk_fgcs_detr(hw, req, scale, 4);
}
static struct clk_ops alchemy_clkops_csrc = {
static const struct clk_ops alchemy_clkops_csrc = {
.recalc_rate = alchemy_clk_csrc_recalc,
.determine_rate = alchemy_clk_csrc_detr,
.set_rate = alchemy_clk_csrc_setr,

View File

@ -331,7 +331,7 @@ bcm47xx_leds_linksys_wrt54g3gv2[] __initconst = {
/* Verified on: WRT54GS V1.0 */
static const struct gpio_led
bcm47xx_leds_linksys_wrt54g_type_0101[] __initconst = {
BCM47XX_GPIO_LED(0, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(0, "green", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
};

View File

@ -11,6 +11,7 @@
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/delay.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_io.h>
@ -120,22 +121,57 @@ static struct clk clk_ephy = {
.set = ephy_set,
};
/*
* Ethernet switch SAR clock
*/
static void swpkt_sar_set(struct clk *clk, int enable)
{
if (BCMCPU_IS_6368())
bcm_hwclock_set(CKCTL_6368_SWPKT_SAR_EN, enable);
else
return;
}
static struct clk clk_swpkt_sar = {
.set = swpkt_sar_set,
};
/*
* Ethernet switch USB clock
*/
static void swpkt_usb_set(struct clk *clk, int enable)
{
if (BCMCPU_IS_6368())
bcm_hwclock_set(CKCTL_6368_SWPKT_USB_EN, enable);
else
return;
}
static struct clk clk_swpkt_usb = {
.set = swpkt_usb_set,
};
/*
* Ethernet switch clock
*/
static void enetsw_set(struct clk *clk, int enable)
{
if (BCMCPU_IS_6328())
if (BCMCPU_IS_6328()) {
bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
else if (BCMCPU_IS_6362())
} else if (BCMCPU_IS_6362()) {
bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
else if (BCMCPU_IS_6368())
bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
CKCTL_6368_SWPKT_USB_EN |
CKCTL_6368_SWPKT_SAR_EN,
enable);
else
} else if (BCMCPU_IS_6368()) {
if (enable) {
clk_enable_unlocked(&clk_swpkt_sar);
clk_enable_unlocked(&clk_swpkt_usb);
} else {
clk_disable_unlocked(&clk_swpkt_usb);
clk_disable_unlocked(&clk_swpkt_sar);
}
bcm_hwclock_set(CKCTL_6368_ROBOSW_EN, enable);
} else {
return;
}
if (enable) {
/* reset switch core afer clock change */
@ -247,6 +283,10 @@ static struct clk clk_hsspi = {
.set = hsspi_set,
};
/*
* HSSPI PLL
*/
static struct clk clk_hsspi_pll;
/*
* XTM clock
@ -256,8 +296,12 @@ static void xtm_set(struct clk *clk, int enable)
if (!BCMCPU_IS_6368())
return;
bcm_hwclock_set(CKCTL_6368_SAR_EN |
CKCTL_6368_SWPKT_SAR_EN, enable);
if (enable)
clk_enable_unlocked(&clk_swpkt_sar);
else
clk_disable_unlocked(&clk_swpkt_sar);
bcm_hwclock_set(CKCTL_6368_SAR_EN, enable);
if (enable) {
/* reset sar core afer clock change */
@ -359,44 +403,128 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
}
EXPORT_SYMBOL_GPL(clk_round_rate);
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "enet0"))
return &clk_enet0;
if (!strcmp(id, "enet1"))
return &clk_enet1;
if (!strcmp(id, "enetsw"))
return &clk_enetsw;
if (!strcmp(id, "ephy"))
return &clk_ephy;
if (!strcmp(id, "usbh"))
return &clk_usbh;
if (!strcmp(id, "usbd"))
return &clk_usbd;
if (!strcmp(id, "spi"))
return &clk_spi;
if (!strcmp(id, "hsspi"))
return &clk_hsspi;
if (!strcmp(id, "xtm"))
return &clk_xtm;
if (!strcmp(id, "periph"))
return &clk_periph;
if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
return &clk_pcm;
if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
return &clk_ipsec;
if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
return &clk_pcie;
return ERR_PTR(-ENOENT);
}
static struct clk_lookup bcm3368_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
CLKDEV_INIT(NULL, "ephy", &clk_ephy),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT(NULL, "pcm", &clk_pcm),
CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
};
EXPORT_SYMBOL(clk_get);
static struct clk_lookup bcm6328_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
CLKDEV_INIT(NULL, "pcie", &clk_pcie),
};
void clk_put(struct clk *clk)
{
}
static struct clk_lookup bcm6338_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
CLKDEV_INIT(NULL, "ephy", &clk_ephy),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
};
EXPORT_SYMBOL(clk_put);
static struct clk_lookup bcm6345_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
CLKDEV_INIT(NULL, "ephy", &clk_ephy),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
};
static struct clk_lookup bcm6348_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
CLKDEV_INIT(NULL, "ephy", &clk_ephy),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet_misc),
CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet_misc),
};
static struct clk_lookup bcm6358_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enet0", &clk_enet0),
CLKDEV_INIT(NULL, "enet1", &clk_enet1),
CLKDEV_INIT(NULL, "ephy", &clk_ephy),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT(NULL, "pcm", &clk_pcm),
CLKDEV_INIT(NULL, "swpkt_sar", &clk_swpkt_sar),
CLKDEV_INIT(NULL, "swpkt_usb", &clk_swpkt_usb),
CLKDEV_INIT("bcm63xx_enet.0", "enet", &clk_enet0),
CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1),
};
static struct clk_lookup bcm6362_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx-hsspi.0", "pll", &clk_hsspi_pll),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT(NULL, "hsspi", &clk_hsspi),
CLKDEV_INIT(NULL, "pcie", &clk_pcie),
CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
};
static struct clk_lookup bcm6368_clks[] = {
/* fixed rate clocks */
CLKDEV_INIT(NULL, "periph", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph),
CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph),
/* gated clocks */
CLKDEV_INIT(NULL, "enetsw", &clk_enetsw),
CLKDEV_INIT(NULL, "usbh", &clk_usbh),
CLKDEV_INIT(NULL, "usbd", &clk_usbd),
CLKDEV_INIT(NULL, "spi", &clk_spi),
CLKDEV_INIT(NULL, "xtm", &clk_xtm),
CLKDEV_INIT(NULL, "ipsec", &clk_ipsec),
};
#define HSSPI_PLL_HZ_6328 133333333
#define HSSPI_PLL_HZ_6362 400000000
@ -404,11 +532,31 @@ EXPORT_SYMBOL(clk_put);
static int __init bcm63xx_clk_init(void)
{
switch (bcm63xx_get_cpu_id()) {
case BCM3368_CPU_ID:
clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks));
break;
case BCM6328_CPU_ID:
clk_hsspi.rate = HSSPI_PLL_HZ_6328;
clk_hsspi_pll.rate = HSSPI_PLL_HZ_6328;
clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks));
break;
case BCM6338_CPU_ID:
clkdev_add_table(bcm6338_clks, ARRAY_SIZE(bcm6338_clks));
break;
case BCM6345_CPU_ID:
clkdev_add_table(bcm6345_clks, ARRAY_SIZE(bcm6345_clks));
break;
case BCM6348_CPU_ID:
clkdev_add_table(bcm6348_clks, ARRAY_SIZE(bcm6348_clks));
break;
case BCM6358_CPU_ID:
clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks));
break;
case BCM6362_CPU_ID:
clk_hsspi.rate = HSSPI_PLL_HZ_6362;
clk_hsspi_pll.rate = HSSPI_PLL_HZ_6362;
clkdev_add_table(bcm6362_clks, ARRAY_SIZE(bcm6362_clks));
break;
case BCM6368_CPU_ID:
clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks));
break;
}

View File

@ -83,6 +83,7 @@ uart0: serial@fff8c100 {
interrupts = <2>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};
@ -95,6 +96,7 @@ uart1: serial@fff8c120 {
interrupts = <3>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};

View File

@ -19,7 +19,7 @@ chosen {
};
&leds0 {
status = "ok";
status = "okay";
brcm,serial-leds;
brcm,serial-dat-low;
brcm,serial-shift-inv;

View File

@ -84,6 +84,7 @@ uart0: serial@10000180 {
interrupts = <5>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};
@ -96,6 +97,7 @@ uart1: serial@100001a0 {
interrupts = <34>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};

View File

@ -69,6 +69,7 @@ uart0: serial@10000100 {
interrupt-parent = <&periph_intc>;
interrupts = <28>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};
@ -78,6 +79,7 @@ uart1: serial@10000120 {
interrupt-parent = <&periph_intc>;
interrupts = <39>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};

View File

@ -19,7 +19,7 @@ chosen {
};
&leds0 {
status = "ok";
status = "okay";
led@0 {
reg = <0>;

View File

@ -93,6 +93,7 @@ uart0: serial@fffe0100 {
interrupts = <2>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};
@ -105,6 +106,7 @@ uart1: serial@fffe0120 {
interrupts = <3>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};

View File

@ -84,6 +84,7 @@ uart0: serial@10000100 {
interrupts = <3>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};
@ -96,6 +97,7 @@ uart1: serial@10000120 {
interrupts = <4>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};

View File

@ -90,6 +90,7 @@ uart0: serial@10000100 {
interrupt-parent = <&periph_intc>;
interrupts = <2>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};
@ -99,6 +100,7 @@ uart1: serial@10000120 {
interrupt-parent = <&periph_intc>;
interrupts = <3>;
clocks = <&periph_clk>;
clock-names = "refclk";
status = "disabled";
};

View File

@ -805,7 +805,6 @@ sdhost: mmc@18142000 {
pinctrl-0 = <&sdhost_pins>;
pinctrl-names = "default";
fifo-depth = <0x20>;
num-slots = <1>;
clock-frequency = <50000000>;
bus-width = <8>;
cap-mmc-highspeed;

View File

@ -219,6 +219,11 @@ uart4: serial@10034000 {
status = "disabled";
};
watchdog: watchdog@10002000 {
compatible = "ingenic,jz4780-watchdog";
reg = <0x10002000 0x100>;
};
nemc: nemc@13410000 {
compatible = "ingenic,jz4780-nemc";
reg = <0x13410000 0x10000>;

View File

@ -47,6 +47,6 @@ partition@50000 {
};
usb@101c0000 {
status = "ok";
status = "okay";
};
};

View File

@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_XILFPGA_NEXYS4DDR) += nexys4ddr.dtb
dtb-$(CONFIG_FIT_IMAGE_FDT_XILFPGA) += nexys4ddr.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))

View File

@ -6,6 +6,14 @@
/ {
compatible = "digilent,nexys4ddr";
aliases {
serial0 = &axi_uart16550;
};
chosen {
bootargs = "console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x0 0x08000000>;

View File

@ -862,7 +862,7 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
*/
cvmx_write_csr(CVMX_ASXX_RX_PRT_EN(INTERFACE(FIX_IPD_OUTPORT)), 0);
cvmx_wait(100000000ull);
__delay(100000000ull);
for (retry_loop_cnt = 0; retry_loop_cnt < 10; retry_loop_cnt++) {
retry_cnt = 100000;

View File

@ -215,7 +215,7 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode)
spxx_clk_ctl.u64 = 0;
spxx_clk_ctl.s.runbist = 1;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
cvmx_wait(10 * MS);
__delay(10 * MS);
spxx_bist_stat.u64 = cvmx_read_csr(CVMX_SPXX_BIST_STAT(interface));
if (spxx_bist_stat.s.stat0)
cvmx_dprintf
@ -265,14 +265,14 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode)
spxx_clk_ctl.s.rcvtrn = 0;
spxx_clk_ctl.s.srxdlck = 0;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
cvmx_wait(100 * MS);
__delay(100 * MS);
/* Reset SRX0 DLL */
spxx_clk_ctl.s.srxdlck = 1;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
/* Waiting for Inf0 Spi4 RX DLL to lock */
cvmx_wait(100 * MS);
__delay(100 * MS);
/* Enable dynamic alignment */
spxx_trn4_ctl.s.trntest = 0;
@ -527,7 +527,7 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout)
spxx_clk_ctl.s.rcvtrn = 1;
spxx_clk_ctl.s.srxdlck = 1;
cvmx_write_csr(CVMX_SPXX_CLK_CTL(interface), spxx_clk_ctl.u64);
cvmx_wait(1000 * MS);
__delay(1000 * MS);
/* SRX0 clear the boot bit */
spxx_trn4_ctl.u64 = cvmx_read_csr(CVMX_SPXX_TRN4_CTL(interface));
@ -536,7 +536,7 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout)
/* Wait for the training sequence to complete */
cvmx_dprintf("SPI%d: Waiting for training\n", interface);
cvmx_wait(1000 * MS);
__delay(1000 * MS);
/* Wait a really long time here */
timeout_time = cvmx_get_cycle() + 1000ull * MS * 600;
/*

View File

@ -38,6 +38,8 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
@ -93,6 +95,8 @@ CONFIG_I2C_JZ4780=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_INGENIC=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_JZ4740_WDT=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
@ -110,7 +114,8 @@ CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
CONFIG_UBIFS_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y

View File

@ -0,0 +1,22 @@
# require CONFIG_CPU_MIPS32_R2=y
# require CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_XILINX=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_FIT_IMAGE_FDT_XILFPGA=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_XILINX=y
CONFIG_SENSORS_ADT7410=y
CONFIG_TMPFS=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_NETDEVICES=y
CONFIG_XILINX_EMACLITE=y
CONFIG_SMSC_PHY=y

View File

@ -1,3 +1,4 @@
CONFIG_SGI_IP22=y
CONFIG_ARC_CONSOLE=y
CONFIG_CPU_R5000=y
CONFIG_NO_HZ=y

View File

@ -1,75 +0,0 @@
CONFIG_MACH_XILFPGA=y
# CONFIG_COMPACTION is not set
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_BLOCK is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_XILINX_EMACLITE=y
CONFIG_SMSC_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_XILINX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_XILINX=y
CONFIG_SENSORS_ADT7410=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MIPS_PLATFORM_DEVICES is not set
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_PANIC_ON_OOPS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_FTRACE is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"

View File

@ -43,4 +43,10 @@ config FIT_IMAGE_FDT_NI169445
Enable this to include the FDT for the 169445 platform from
National Instruments in the FIT kernel image.
config FIT_IMAGE_FDT_XILFPGA
bool "Include FDT for Xilfpga"
help
Enable this to include the FDT for the MIPSfpga platform
from Imagination Technologies in the FIT kernel image.
endif

View File

@ -0,0 +1,22 @@
/ {
images {
fdt@xilfpga {
description = "MIPSfpga (xilfpga) Device Tree";
data = /incbin/("boot/dts/xilfpga/nexys4ddr.dtb");
type = "flat_dt";
arch = "mips";
compression = "none";
hash@0 {
algo = "sha1";
};
};
};
configurations {
conf@xilfpga {
description = "MIPSfpga Linux kernel";
kernel = "kernel@0";
fdt = "fdt@xilfpga";
};
};
};

View File

@ -19,6 +19,9 @@
#include <asm/asmmacro-64.h>
#endif
/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
#undef fp
/*
* Helper macros for generating raw instruction encodings.
*/
@ -105,6 +108,7 @@
.macro fpu_save_16odd thread
.set push
.set mips64r2
.set fp=64
SET_HARDFLOAT
sdc1 $f1, THREAD_FPR1(\thread)
sdc1 $f3, THREAD_FPR3(\thread)
@ -126,8 +130,8 @@
.endm
.macro fpu_save_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f
fpu_save_16odd \thread
@ -163,6 +167,7 @@
.macro fpu_restore_16odd thread
.set push
.set mips64r2
.set fp=64
SET_HARDFLOAT
ldc1 $f1, THREAD_FPR1(\thread)
ldc1 $f3, THREAD_FPR3(\thread)
@ -184,8 +189,8 @@
.endm
.macro fpu_restore_double thread status tmp
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
sll \tmp, \status, 5
bgez \tmp, 10f # 16 register mode?
@ -234,9 +239,6 @@
.endm
#ifdef TOOLCHAIN_SUPPORTS_MSA
/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
#undef fp
.macro _cfcmsa rd, cs
.set push
.set mips32r2

View File

@ -456,6 +456,7 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *
{
smp_mb__before_llsc();
__clear_bit(nr, addr);
nudge_writes();
}
/*

View File

@ -204,8 +204,10 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
#else
#include <asm-generic/cmpxchg-local.h>
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#ifndef CONFIG_SMP
#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n))
#endif
#endif
#undef __scbeqz

View File

@ -1355,19 +1355,17 @@ do { \
if (sel == 0) \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
"dsra\t%M0, %M0, 32\n\t" \
"dsra\t%L0, %L0, 32\n\t" \
"dmfc0\t%L0, " #source "\n\t" \
"dsra\t%M0, %L0, 32\n\t" \
"sll\t%L0, %L0, 0\n\t" \
".set\tmips0" \
: "=r" (__val)); \
else \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source ", " #sel "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
"dsra\t%M0, %M0, 32\n\t" \
"dsra\t%L0, %L0, 32\n\t" \
"dmfc0\t%L0, " #source ", " #sel "\n\t" \
"dsra\t%M0, %L0, 32\n\t" \
"sll\t%L0, %L0, 0\n\t" \
".set\tmips0" \
: "=r" (__val)); \
local_irq_restore(__flags); \

View File

@ -36,6 +36,8 @@
#ifndef __CVMX_FPA_H__
#define __CVMX_FPA_H__
#include <linux/delay.h>
#include <asm/octeon/cvmx-address.h>
#include <asm/octeon/cvmx-fpa-defs.h>
@ -165,7 +167,7 @@ static inline void cvmx_fpa_enable(void)
}
/* Enforce a 10 cycle delay between config and enable */
cvmx_wait(10);
__delay(10);
}
/* FIXME: CVMX_FPA_CTL_STATUS read is unmodelled */

View File

@ -30,6 +30,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/delay.h>
enum cvmx_mips_space {
CVMX_MIPS_SPACE_XKSEG = 3LL,
@ -428,18 +429,6 @@ static inline uint64_t cvmx_get_cycle(void)
return cycle;
}
/**
* Wait for the specified number of cycle
*
*/
static inline void cvmx_wait(uint64_t cycles)
{
uint64_t done = cvmx_get_cycle() + cycles;
while (cvmx_get_cycle() < done)
; /* Spin */
}
/**
* Reads a chip global cycle counter. This counts CPU cycles since
* chip reset. The counter is 64 bit.
@ -481,7 +470,7 @@ static inline uint64_t cvmx_get_cycle_global(void)
result = -1; \
break; \
} else \
cvmx_wait(100); \
__delay(100); \
} \
} while (0); \
result; \

View File

@ -240,8 +240,8 @@ static inline int pfn_valid(unsigned long pfn)
#endif
#define virt_to_page(kaddr) pfn_to_page(PFN_DOWN(virt_to_phys((void *) \
(kaddr))))
#define virt_to_pfn(kaddr) PFN_DOWN(virt_to_phys((void *)(kaddr)))
#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
extern int __virt_addr_valid(const volatile void *kaddr);
#define virt_addr_valid(kaddr) \

View File

@ -368,8 +368,6 @@ struct task_struct;
/* Free all resources held by a thread. */
#define release_thread(thread) do { } while(0)
extern unsigned long thread_saved_pc(struct task_struct *tsk);
/*
* Do necessary setup to start up a newly executed thread.
*/

View File

@ -29,7 +29,7 @@ extern cpumask_t cpu_foreign_map[];
/* Map from cpu id to sequential logical cpu number. This will only
not be idempotent when cpus failed to come on-line. */
extern int __cpu_number_map[NR_CPUS];
extern int __cpu_number_map[CONFIG_MIPS_NR_CPU_NR_MAP];
#define cpu_number_map(cpu) __cpu_number_map[cpu]
/* The reverse map from sequential logical cpu number to cpu id. */

View File

@ -26,12 +26,34 @@
#define __NR_syscall 4000
#endif
static inline bool mips_syscall_is_indirect(struct task_struct *task,
struct pt_regs *regs)
{
/* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */
return (IS_ENABLED(CONFIG_32BIT) ||
test_tsk_thread_flag(task, TIF_32BIT_REGS)) &&
(regs->regs[2] == __NR_syscall);
}
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
return current_thread_info()->syscall;
}
static inline void mips_syscall_update_nr(struct task_struct *task,
struct pt_regs *regs)
{
/*
* v0 is the system call number, except for O32 ABI syscall(), where it
* ends up in a0.
*/
if (mips_syscall_is_indirect(task, regs))
task_thread_info(task)->syscall = regs->regs[4];
else
task_thread_info(task)->syscall = regs->regs[2];
}
static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
struct task_struct *task, struct pt_regs *regs, unsigned int n)
{
@ -98,10 +120,9 @@ static inline void syscall_get_arguments(struct task_struct *task,
unsigned long *args)
{
int ret;
/* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */
if ((IS_ENABLED(CONFIG_32BIT) ||
test_tsk_thread_flag(task, TIF_32BIT_REGS)) &&
(regs->regs[2] == __NR_syscall))
/* O32 ABI syscall() */
if (mips_syscall_is_indirect(task, regs))
i++;
while (n--)

View File

@ -487,7 +487,7 @@ arch_initcall(frame_info_init);
/*
* Return saved PC of a blocked thread.
*/
unsigned long thread_saved_pc(struct task_struct *tsk)
static unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct thread_struct *t = &tsk->thread;

View File

@ -144,6 +144,9 @@ int ptrace_setregs(struct task_struct *child, struct user_pt_regs __user *data)
/* badvaddr, status, and cause may not be written. */
/* System call number may have been changed */
mips_syscall_update_nr(child, regs);
return 0;
}
@ -345,6 +348,9 @@ static int gpr32_set(struct task_struct *target,
}
}
/* System call number may have been changed */
mips_syscall_update_nr(target, regs);
return 0;
}
@ -405,6 +411,9 @@ static int gpr64_set(struct task_struct *target,
}
}
/* System call number may have been changed */
mips_syscall_update_nr(target, regs);
return 0;
}
@ -618,6 +627,19 @@ static const struct user_regset_view user_mips64_view = {
.n = ARRAY_SIZE(mips64_regsets),
};
#ifdef CONFIG_MIPS32_N32
static const struct user_regset_view user_mipsn32_view = {
.name = "mipsn32",
.e_flags = EF_MIPS_ABI2,
.e_machine = ELF_ARCH,
.ei_osabi = ELF_OSABI,
.regsets = mips64_regsets,
.n = ARRAY_SIZE(mips64_regsets),
};
#endif /* CONFIG_MIPS32_N32 */
#endif /* CONFIG_64BIT */
const struct user_regset_view *task_user_regset_view(struct task_struct *task)
@ -628,6 +650,10 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
#ifdef CONFIG_MIPS32_O32
if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
return &user_mips_view;
#endif
#ifdef CONFIG_MIPS32_N32
if (test_tsk_thread_flag(task, TIF_32BIT_ADDR))
return &user_mipsn32_view;
#endif
return &user_mips64_view;
#endif
@ -753,6 +779,12 @@ long arch_ptrace(struct task_struct *child, long request,
switch (addr) {
case 0 ... 31:
regs->regs[addr] = data;
/* System call number may have been changed */
if (addr == 2)
mips_syscall_update_nr(child, regs);
else if (addr == 4 &&
mips_syscall_is_indirect(child, regs))
mips_syscall_update_nr(child, regs);
break;
case FPR_BASE ... FPR_BASE + 31: {
union fpureg *fregs = get_fpu_regs(child);
@ -864,9 +896,11 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
current_thread_info()->syscall = syscall;
if (test_thread_flag(TIF_SYSCALL_TRACE) &&
tracehook_report_syscall_entry(regs))
return -1;
if (test_thread_flag(TIF_SYSCALL_TRACE)) {
if (tracehook_report_syscall_entry(regs))
return -1;
syscall = current_thread_info()->syscall;
}
#ifdef CONFIG_SECCOMP
if (unlikely(test_thread_flag(TIF_SECCOMP))) {
@ -884,6 +918,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall)
ret = __secure_computing(&sd);
if (ret == -1)
return ret;
syscall = current_thread_info()->syscall;
}
#endif

View File

@ -33,6 +33,7 @@
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/reg.h>
#include <asm/syscall.h>
#include <linux/uaccess.h>
#include <asm/bootinfo.h>
@ -195,6 +196,12 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
switch (addr) {
case 0 ... 31:
regs->regs[addr] = data;
/* System call number may have been changed */
if (addr == 2)
mips_syscall_update_nr(child, regs);
else if (addr == 4 &&
mips_syscall_is_indirect(child, regs))
mips_syscall_update_nr(child, regs);
break;
case FPR_BASE ... FPR_BASE + 31: {
union fpureg *fregs = get_fpu_regs(child);

View File

@ -40,8 +40,8 @@
*/
LEAF(_save_fp)
EXPORT_SYMBOL(_save_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_save_double a0 t0 t1 # clobbers t1
@ -52,8 +52,8 @@ EXPORT_SYMBOL(_save_fp)
* Restore a thread's fp context.
*/
LEAF(_restore_fp)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
mfc0 t0, CP0_STATUS
#endif
fpu_restore_double a0 t0 t1 # clobbers t1
@ -246,11 +246,11 @@ LEAF(_save_fp_context)
cfc1 t1, fcr31
.set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
#ifdef CONFIG_CPU_MIPSR2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS
@ -314,11 +314,11 @@ LEAF(_save_fp_context)
LEAF(_restore_fp_context)
EX lw t1, 0(a1)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) || \
defined(CONFIG_CPU_MIPS32_R6)
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
defined(CONFIG_CPU_MIPSR6)
.set push
SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
#ifdef CONFIG_CPU_MIPSR2
.set mips32r2
.set fp=64
mfc0 t0, CP0_STATUS

View File

@ -80,6 +80,7 @@ EXPORT_SYMBOL(mips_io_port_base);
static struct resource code_resource = { .name = "Kernel code", };
static struct resource data_resource = { .name = "Kernel data", };
static struct resource bss_resource = { .name = "Kernel bss", };
static void *detect_magic __initdata = detect_memory_region;
@ -927,6 +928,8 @@ static void __init resource_init(void)
code_resource.end = __pa_symbol(&_etext) - 1;
data_resource.start = __pa_symbol(&_etext);
data_resource.end = __pa_symbol(&_edata) - 1;
bss_resource.start = __pa_symbol(&__bss_start);
bss_resource.end = __pa_symbol(&__bss_stop) - 1;
for (i = 0; i < boot_mem_map.nr_map; i++) {
struct resource *res;
@ -966,6 +969,7 @@ static void __init resource_init(void)
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
request_resource(res, &bss_resource);
request_crashkernel(res);
}
}

View File

@ -48,7 +48,7 @@
#include <asm/setup.h>
#include <asm/maar.h>
int __cpu_number_map[NR_CPUS]; /* Map physical to logical */
int __cpu_number_map[CONFIG_MIPS_NR_CPU_NR_MAP]; /* Map physical to logical */
EXPORT_SYMBOL(__cpu_number_map);
int __cpu_logical_map[NR_CPUS]; /* Map logical to physical */

View File

@ -446,9 +446,9 @@ void __init ltq_soc_init(void)
/* add our generic xway clocks */
clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI);
clkdev_add_pmu("1e100400.serial", NULL, 0, 0, PMU_ASC0);
clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT);
clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP);
clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1);
clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA);
clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI);
clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU);
@ -462,10 +462,8 @@ void __init ltq_soc_init(void)
clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE);
}
if (!of_machine_is_compatible("lantiq,ase")) {
clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1);
if (!of_machine_is_compatible("lantiq,ase"))
clkdev_add_pci();
}
if (of_machine_is_compatible("lantiq,grx390") ||
of_machine_is_compatible("lantiq,ar10")) {

View File

@ -197,8 +197,7 @@ static int __init pvc_proc_init(void)
if (proc_entry == NULL)
goto error;
init_timer(&timer);
timer.function = pvc_proc_timerfunc;
setup_timer(&timer, pvc_proc_timerfunc, 0UL);
return 0;
error:

View File

@ -810,7 +810,7 @@ do { \
#define SITOREG(si, x) \
do { \
if (cop1_64bit(xcp) && !hybrid_fprs()) { \
unsigned i; \
unsigned int i; \
set_fpr32(&ctx->fpr[x], 0, si); \
for (i = 1; i < ARRAY_SIZE(ctx->fpr[x].val32); i++) \
set_fpr32(&ctx->fpr[x], i, 0); \
@ -823,7 +823,7 @@ do { \
#define SITOHREG(si, x) \
do { \
unsigned i; \
unsigned int i; \
set_fpr32(&ctx->fpr[x], 1, si); \
for (i = 2; i < ARRAY_SIZE(ctx->fpr[x].val32); i++) \
set_fpr32(&ctx->fpr[x], i, 0); \
@ -834,7 +834,7 @@ do { \
#define DITOREG(di, x) \
do { \
unsigned fpr, i; \
unsigned int fpr, i; \
fpr = (x) & ~(cop1_64bit(xcp) ^ 1); \
set_fpr64(&ctx->fpr[fpr], 0, di); \
for (i = 1; i < ARRAY_SIZE(ctx->fpr[x].val64); i++) \
@ -1465,7 +1465,7 @@ DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);
static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
mips_instruction ir, void __user **fault_addr)
{
unsigned rcsr = 0; /* resulting csr */
unsigned int rcsr = 0; /* resulting csr */
MIPS_FPU_EMU_INC_STATS(cp1xops);
@ -1661,10 +1661,10 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
mips_instruction ir)
{
int rfmt; /* resulting format */
unsigned rcsr = 0; /* resulting csr */
unsigned int rcsr = 0; /* resulting csr */
unsigned int oldrm;
unsigned int cbit;
unsigned cond;
unsigned int cond;
union {
union ieee754dp d;
union ieee754sp s;
@ -1795,7 +1795,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
SPFROMREG(fs, MIPSInst_FS(ir));
SPFROMREG(fd, MIPSInst_FD(ir));
rv.s = ieee754sp_maddf(fd, fs, ft);
break;
goto copcsr;
}
case fmsubf_op: {
@ -1809,7 +1809,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
SPFROMREG(fs, MIPSInst_FS(ir));
SPFROMREG(fd, MIPSInst_FD(ir));
rv.s = ieee754sp_msubf(fd, fs, ft);
break;
goto copcsr;
}
case frint_op: {
@ -1834,7 +1834,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
SPFROMREG(fs, MIPSInst_FS(ir));
rv.w = ieee754sp_2008class(fs);
rfmt = w_fmt;
break;
goto copcsr;
}
case fmin_op: {
@ -1847,7 +1847,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
SPFROMREG(ft, MIPSInst_FT(ir));
SPFROMREG(fs, MIPSInst_FS(ir));
rv.s = ieee754sp_fmin(fs, ft);
break;
goto copcsr;
}
case fmina_op: {
@ -1860,7 +1860,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
SPFROMREG(ft, MIPSInst_FT(ir));
SPFROMREG(fs, MIPSInst_FS(ir));
rv.s = ieee754sp_fmina(fs, ft);
break;
goto copcsr;
}
case fmax_op: {
@ -1873,7 +1873,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
SPFROMREG(ft, MIPSInst_FT(ir));
SPFROMREG(fs, MIPSInst_FS(ir));
rv.s = ieee754sp_fmax(fs, ft);
break;
goto copcsr;
}
case fmaxa_op: {
@ -1886,7 +1886,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
SPFROMREG(ft, MIPSInst_FT(ir));
SPFROMREG(fs, MIPSInst_FS(ir));
rv.s = ieee754sp_fmaxa(fs, ft);
break;
goto copcsr;
}
case fabs_op:
@ -2029,9 +2029,10 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
default:
if (!NO_R6EMU && MIPSInst_FUNC(ir) >= fcmp_op) {
unsigned cmpop = MIPSInst_FUNC(ir) - fcmp_op;
unsigned int cmpop;
union ieee754sp fs, ft;
cmpop = MIPSInst_FUNC(ir) - fcmp_op;
SPFROMREG(fs, MIPSInst_FS(ir));
SPFROMREG(ft, MIPSInst_FT(ir));
rv.w = ieee754sp_cmp(fs, ft,
@ -2165,7 +2166,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
DPFROMREG(fs, MIPSInst_FS(ir));
DPFROMREG(fd, MIPSInst_FD(ir));
rv.d = ieee754dp_maddf(fd, fs, ft);
break;
goto copcsr;
}
case fmsubf_op: {
@ -2179,7 +2180,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
DPFROMREG(fs, MIPSInst_FS(ir));
DPFROMREG(fd, MIPSInst_FD(ir));
rv.d = ieee754dp_msubf(fd, fs, ft);
break;
goto copcsr;
}
case frint_op: {
@ -2204,7 +2205,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
DPFROMREG(fs, MIPSInst_FS(ir));
rv.l = ieee754dp_2008class(fs);
rfmt = l_fmt;
break;
goto copcsr;
}
case fmin_op: {
@ -2217,7 +2218,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
DPFROMREG(ft, MIPSInst_FT(ir));
DPFROMREG(fs, MIPSInst_FS(ir));
rv.d = ieee754dp_fmin(fs, ft);
break;
goto copcsr;
}
case fmina_op: {
@ -2230,7 +2231,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
DPFROMREG(ft, MIPSInst_FT(ir));
DPFROMREG(fs, MIPSInst_FS(ir));
rv.d = ieee754dp_fmina(fs, ft);
break;
goto copcsr;
}
case fmax_op: {
@ -2243,7 +2244,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
DPFROMREG(ft, MIPSInst_FT(ir));
DPFROMREG(fs, MIPSInst_FS(ir));
rv.d = ieee754dp_fmax(fs, ft);
break;
goto copcsr;
}
case fmaxa_op: {
@ -2256,7 +2257,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
DPFROMREG(ft, MIPSInst_FT(ir));
DPFROMREG(fs, MIPSInst_FS(ir));
rv.d = ieee754dp_fmaxa(fs, ft);
break;
goto copcsr;
}
case fabs_op:
@ -2379,9 +2380,10 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
default:
if (!NO_R6EMU && MIPSInst_FUNC(ir) >= fcmp_op) {
unsigned cmpop = MIPSInst_FUNC(ir) - fcmp_op;
unsigned int cmpop;
union ieee754dp fs, ft;
cmpop = MIPSInst_FUNC(ir) - fcmp_op;
DPFROMREG(fs, MIPSInst_FS(ir));
DPFROMREG(ft, MIPSInst_FT(ir));
rv.w = ieee754dp_cmp(fs, ft,

View File

@ -45,10 +45,10 @@ static union ieee754dp _dp_maddf(union ieee754dp z, union ieee754dp x,
{
int re;
int rs;
unsigned lxm;
unsigned hxm;
unsigned lym;
unsigned hym;
unsigned int lxm;
unsigned int hxm;
unsigned int lym;
unsigned int hym;
u64 lrm;
u64 hrm;
u64 lzm;

View File

@ -26,10 +26,10 @@ union ieee754dp ieee754dp_mul(union ieee754dp x, union ieee754dp y)
int re;
int rs;
u64 rm;
unsigned lxm;
unsigned hxm;
unsigned lym;
unsigned hym;
unsigned int lxm;
unsigned int hxm;
unsigned int lym;
unsigned int hym;
u64 lrm;
u64 hrm;
u64 t;

View File

@ -21,7 +21,7 @@
#include "ieee754dp.h"
static const unsigned table[] = {
static const unsigned int table[] = {
0, 1204, 3062, 5746, 9193, 13348, 18162, 23592,
29598, 36145, 43202, 50740, 58733, 67158, 75992,
85215, 83599, 71378, 60428, 50647, 41945, 34246,
@ -33,7 +33,7 @@ union ieee754dp ieee754dp_sqrt(union ieee754dp x)
{
struct _ieee754_csr oldcsr;
union ieee754dp y, z, t;
unsigned scalx, yh;
unsigned int scalx, yh;
COMPXDP;
EXPLODEXDP;

View File

@ -165,11 +165,12 @@ struct _ieee754_csr {
};
#define ieee754_csr (*(struct _ieee754_csr *)(&current->thread.fpu.fcr31))
static inline unsigned ieee754_getrm(void)
static inline unsigned int ieee754_getrm(void)
{
return (ieee754_csr.rm);
}
static inline unsigned ieee754_setrm(unsigned rm)
static inline unsigned int ieee754_setrm(unsigned int rm)
{
return (ieee754_csr.rm = rm);
}
@ -177,14 +178,14 @@ static inline unsigned ieee754_setrm(unsigned rm)
/*
* get current exceptions
*/
static inline unsigned ieee754_getcx(void)
static inline unsigned int ieee754_getcx(void)
{
return (ieee754_csr.cx);
}
/* test for current exception condition
*/
static inline int ieee754_cxtest(unsigned n)
static inline int ieee754_cxtest(unsigned int n)
{
return (ieee754_csr.cx & n);
}
@ -192,21 +193,21 @@ static inline int ieee754_cxtest(unsigned n)
/*
* get sticky exceptions
*/
static inline unsigned ieee754_getsx(void)
static inline unsigned int ieee754_getsx(void)
{
return (ieee754_csr.sx);
}
/* clear sticky conditions
*/
static inline unsigned ieee754_clrsx(void)
static inline unsigned int ieee754_clrsx(void)
{
return (ieee754_csr.sx = 0);
}
/* test for sticky exception condition
*/
static inline int ieee754_sxtest(unsigned n)
static inline int ieee754_sxtest(unsigned int n)
{
return (ieee754_csr.sx & n);
}

View File

@ -54,13 +54,13 @@ static inline int ieee754_class_nan(int xc)
}
#define COMPXSP \
unsigned xm; int xe; int xs __maybe_unused; int xc
unsigned int xm; int xe; int xs __maybe_unused; int xc
#define COMPYSP \
unsigned ym; int ye; int ys; int yc
unsigned int ym; int ye; int ys; int yc
#define COMPZSP \
unsigned zm; int ze; int zs; int zc
unsigned int zm; int ze; int zs; int zc
#define EXPLODESP(v, vc, vs, ve, vm) \
{ \

View File

@ -65,7 +65,7 @@ union ieee754sp __cold ieee754sp_nanxcpt(union ieee754sp r)
return r;
}
static unsigned ieee754sp_get_rounding(int sn, unsigned xm)
static unsigned int ieee754sp_get_rounding(int sn, unsigned int xm)
{
/* inexact must round of 3 bits
*/
@ -96,7 +96,7 @@ static unsigned ieee754sp_get_rounding(int sn, unsigned xm)
* xe is an unbiased exponent
* xm is 3bit extended precision value.
*/
union ieee754sp ieee754sp_format(int sn, int xe, unsigned xm)
union ieee754sp ieee754sp_format(int sn, int xe, unsigned int xm)
{
assert(xm); /* we don't gen exact zeros (probably should) */

View File

@ -69,7 +69,7 @@ static inline int ieee754sp_finite(union ieee754sp x)
#define SPDNORMY SPDNORMx(ym, ye)
#define SPDNORMZ SPDNORMx(zm, ze)
static inline union ieee754sp buildsp(int s, int bx, unsigned m)
static inline union ieee754sp buildsp(int s, int bx, unsigned int m)
{
union ieee754sp r;

View File

@ -23,9 +23,9 @@
union ieee754sp ieee754sp_div(union ieee754sp x, union ieee754sp y)
{
unsigned rm;
unsigned int rm;
int re;
unsigned bm;
unsigned int bm;
COMPXSP;
COMPYSP;

View File

@ -23,7 +23,7 @@
union ieee754sp ieee754sp_fint(int x)
{
unsigned xm;
unsigned int xm;
int xe;
int xs;

View File

@ -20,9 +20,9 @@ static union ieee754sp _sp_maddf(union ieee754sp z, union ieee754sp x,
{
int re;
int rs;
unsigned rm;
uint64_t rm64;
uint64_t zm64;
unsigned int rm;
u64 rm64;
u64 zm64;
int s;
COMPXSP;

View File

@ -25,15 +25,15 @@ union ieee754sp ieee754sp_mul(union ieee754sp x, union ieee754sp y)
{
int re;
int rs;
unsigned rm;
unsigned int rm;
unsigned short lxm;
unsigned short hxm;
unsigned short lym;
unsigned short hym;
unsigned lrm;
unsigned hrm;
unsigned t;
unsigned at;
unsigned int lrm;
unsigned int hrm;
unsigned int t;
unsigned int at;
COMPXSP;
COMPYSP;

View File

@ -179,7 +179,7 @@ static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
unsigned long attrs)
{
unsigned long user_count = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
unsigned long user_count = vma_pages(vma);
unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
unsigned long addr = (unsigned long)cpu_addr;
unsigned long off = vma->vm_pgoff;

View File

@ -402,7 +402,6 @@ int page_is_ram(unsigned long pagenr)
void __init paging_init(void)
{
unsigned long max_zone_pfns[MAX_NR_ZONES];
unsigned long lastpfn __maybe_unused;
pagetable_init();
@ -416,17 +415,14 @@ void __init paging_init(void)
max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
#endif
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
lastpfn = max_low_pfn;
#ifdef CONFIG_HIGHMEM
max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
lastpfn = highend_pfn;
if (cpu_has_dc_aliases && max_low_pfn != highend_pfn) {
printk(KERN_WARNING "This processor doesn't support highmem."
" %ldk highmem ignored\n",
(highend_pfn - max_low_pfn) << (PAGE_SHIFT - 10));
max_zone_pfns[ZONE_HIGHMEM] = max_low_pfn;
lastpfn = max_low_pfn;
}
#endif

View File

@ -33,14 +33,13 @@
#define RALINK_GPIOMODE 0x60
#define PPLL_CFG1 0x9c
#define PDRV_SW_SET BIT(23)
#define PPLL_DRV 0xa0
#define PDRV_SW_SET (1<<31)
#define LC_CKDRVPD (1<<19)
#define LC_CKDRVOHZ (1<<18)
#define LC_CKDRVHZ (1<<17)
#define LC_CKTEST (1<<16)
#define PDRV_SW_SET BIT(31)
#define LC_CKDRVPD BIT(19)
#define LC_CKDRVOHZ BIT(18)
#define LC_CKDRVHZ BIT(17)
#define LC_CKTEST BIT(16)
/* PCI Bridge registers */
#define RALINK_PCI_PCICFG_ADDR 0x00
@ -66,7 +65,7 @@
#define PCIEPHY0_CFG 0x90
#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498
#define RALINK_PCIE0_CLK_EN (1 << 26)
#define RALINK_PCIE0_CLK_EN BIT(26)
#define BUSY 0x80000000
#define WAITRETRY_MAX 10
@ -121,7 +120,7 @@ static int wait_pciephy_busy(void)
else
break;
if (retry++ > WAITRETRY_MAX) {
printk(KERN_WARN "PCIE-PHY retry failed.\n");
pr_warn("PCIE-PHY retry failed.\n");
return -1;
}
}

View File

@ -639,7 +639,7 @@ static int __cvmx_pcie_rc_initialize_link_gen1(int pcie_port)
cvmx_dprintf("PCIe: Port %d link timeout\n", pcie_port);
return -1;
}
cvmx_wait(10000);
__delay(10000);
pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
} while (pciercx_cfg032.s.dlla == 0);
@ -821,7 +821,7 @@ static int __cvmx_pcie_rc_initialize_gen1(int pcie_port)
* don't poll PESCX_CTL_STATUS2[PCIERST], but simply wait a
* fixed number of cycles.
*/
cvmx_wait(400000);
__delay(400000);
/*
* PESCX_BIST_STATUS2[PCLK_RUN] was missing on pass 1 of
@ -1018,7 +1018,7 @@ static int __cvmx_pcie_rc_initialize_gen1(int pcie_port)
i = in_p_offset;
while (i--) {
cvmx_write64_uint32(write_address, 0);
cvmx_wait(10000);
__delay(10000);
}
/*
@ -1034,7 +1034,7 @@ static int __cvmx_pcie_rc_initialize_gen1(int pcie_port)
dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
old_in_fif_p_count = dbg_data.s.data & 0xff;
cvmx_write64_uint32(write_address, 0);
cvmx_wait(10000);
__delay(10000);
dbg_data.u64 = cvmx_read_csr(CVMX_PEXP_NPEI_DBG_DATA);
in_fif_p_count = dbg_data.s.data & 0xff;
} while (in_fif_p_count != ((old_in_fif_p_count+1) & 0xff));
@ -1053,7 +1053,7 @@ static int __cvmx_pcie_rc_initialize_gen1(int pcie_port)
cvmx_dprintf("PCIe: Port %d aligning TLP counters as workaround to maintain ordering\n", pcie_port);
while (in_fif_p_count != 0) {
cvmx_write64_uint32(write_address, 0);
cvmx_wait(10000);
__delay(10000);
in_fif_p_count = (in_fif_p_count + 1) & 0xff;
}
/*
@ -1105,7 +1105,7 @@ static int __cvmx_pcie_rc_initialize_link_gen2(int pcie_port)
do {
if (cvmx_get_cycle() - start_cycle > octeon_get_clock_rate())
return -1;
cvmx_wait(10000);
__delay(10000);
pciercx_cfg032.u32 = cvmx_pcie_cfgx_read(pcie_port, CVMX_PCIERCX_CFG032(pcie_port));
} while ((pciercx_cfg032.s.dlla == 0) || (pciercx_cfg032.s.lt == 1));

View File

@ -31,7 +31,6 @@ choice
config SOC_RT305X
bool "RT305x"
select USB_ARCH_HAS_HCD
config SOC_RT3883
bool "RT3883"

View File

@ -145,8 +145,8 @@ static struct rt2880_pmx_func i2c_grp_mt7628[] = {
FUNC("i2c", 0, 4, 2),
};
static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) };
static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };

View File

@ -1,10 +0,0 @@
# SPDX-License-Identifier: GPL-2.0
choice
prompt "Machine type"
depends on MACH_XILFPGA
default XILFPGA_NEXYS4DDR
config XILFPGA_NEXYS4DDR
bool "Nexys4DDR by Digilent"
endchoice

View File

@ -1,7 +0,0 @@
#
# Makefile for the Xilfpga
#
obj-y += init.o
obj-y += intc.o
obj-y += time.o

View File

@ -1,3 +0,0 @@
platform-$(CONFIG_MACH_XILFPGA) += xilfpga/
cflags-$(CONFIG_MACH_XILFPGA) += -I$(srctree)/arch/mips/include/asm/mach-xilfpga
load-$(CONFIG_MACH_XILFPGA) += 0xffffffff80100000

View File

@ -1,44 +0,0 @@
/*
* Xilfpga platform setup
*
* Copyright (C) 2015 Imagination Technologies
* Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/of_fdt.h>
#include <asm/prom.h>
#define XILFPGA_UART_BASE 0xb0401000
const char *get_system_type(void)
{
return "MIPSfpga";
}
void __init plat_mem_setup(void)
{
__dt_setup_arch(__dtb_start);
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
}
void __init prom_init(void)
{
setup_8250_early_printk_port(XILFPGA_UART_BASE, 2, 50000);
}
void __init prom_free_prom_memory(void)
{
}
void __init device_tree_init(void)
{
if (!initial_boot_params)
return;
unflatten_and_copy_device_tree();
}

View File

@ -1,22 +0,0 @@
/*
* Xilfpga interrupt controller setup
*
* Copyright (C) 2015 Imagination Technologies
* Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/irqchip.h>
#include <asm/irq_cpu.h>
void __init arch_init_irq(void)
{
irqchip_init();
}

View File

@ -1,41 +0,0 @@
/*
* Xilfpga clocksource/timer setup
*
* Copyright (C) 2015 Imagination Technologies
* Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/of.h>
#include <asm/time.h>
void __init plat_time_init(void)
{
struct device_node *np;
struct clk *clk;
of_clk_init(NULL);
timer_probe();
np = of_get_cpu_node(0, NULL);
if (!np) {
pr_err("Failed to get CPU node\n");
return;
}
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
return;
}
mips_hpt_frequency = clk_get_rate(clk) / 2;
clk_put(clk);
}

View File

@ -843,8 +843,10 @@ static int bcm_uart_probe(struct platform_device *pdev)
if (!res_irq)
return -ENODEV;
clk = pdev->dev.of_node ? of_clk_get(pdev->dev.of_node, 0) :
clk_get(&pdev->dev, "periph");
clk = clk_get(&pdev->dev, "refclk");
if (IS_ERR(clk) && pdev->dev.of_node)
clk = of_clk_get(pdev->dev.of_node, 0);
if (IS_ERR(clk))
return -ENODEV;

View File

@ -1460,7 +1460,7 @@ config INDYDOG
config JZ4740_WDT
tristate "Ingenic jz4740 SoC hardware watchdog"
depends on MACH_JZ4740
depends on MACH_JZ4740 || MACH_JZ4780
select WATCHDOG_CORE
help
Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.