[ALSA] maestro3: Add hardware volume control quirk list

Maestro3 driver
Add a hardware volume quirk list to the maestro3 driver. Details were
taken from the Windows driver. Hardware volume control is enabled only for
the systems in the list.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Ville Syrjala 2005-05-20 18:40:38 +02:00 committed by Jaroslav Kysela
parent 58c1f8acde
commit 82f008c2b6

View file

@ -779,6 +779,12 @@ struct m3_quirk {
(e.g. for IrDA on Dell Inspirons) */
};
struct m3_hv_quirk {
u16 vendor, device, subsystem_vendor, subsystem_device;
u32 config; /* ALLEGRO_CONFIG hardware volume bits */
int is_omnibook; /* Do HP OmniBook GPIO magic? */
};
struct m3_list {
int curlen;
int mem_addr;
@ -828,6 +834,7 @@ struct snd_m3 {
struct pci_dev *pci;
struct m3_quirk *quirk;
struct m3_hv_quirk *hv_quirk;
int dacs_active;
int timer_users;
@ -856,7 +863,7 @@ struct snd_m3 {
snd_kcontrol_t *master_switch;
snd_kcontrol_t *master_volume;
struct tasklet_struct hwvol_tq;
#ifdef CONFIG_PM
u16 *suspend_mem;
#endif
@ -973,6 +980,71 @@ static struct m3_quirk m3_quirk_list[] = {
{ NULL }
};
/* These values came from the Windows driver. */
static struct m3_hv_quirk m3_hv_quirk_list[] = {
/* Allegro chips */
{ 0x125D, 0x1988, 0x0E11, 0x002E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x0E11, 0x0094, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x0E11, 0xB112, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x0E11, 0xB114, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x103C, 0x0012, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x103C, 0x0018, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x103C, 0x001C, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x103C, 0x001D, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x103C, 0x001E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x107B, 0x3350, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x10F7, 0x8338, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x10F7, 0x833C, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x10F7, 0x833D, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x10F7, 0x833E, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x10F7, 0x833F, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x13BD, 0x1018, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x13BD, 0x1019, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x13BD, 0x101A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x14FF, 0x0F03, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x14FF, 0x0F04, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x14FF, 0x0F05, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x156D, 0xB400, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x156D, 0xB795, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x156D, 0xB797, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x156D, 0xC700, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD, 0 },
{ 0x125D, 0x1988, 0x1033, 0x80F1, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x103C, 0x001A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 }, /* HP OmniBook 6100 */
{ 0x125D, 0x1988, 0x107B, 0x340A, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x107B, 0x3450, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x109F, 0x3134, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x109F, 0x3161, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x144D, 0x3280, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x144D, 0x3281, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x144D, 0xC002, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x144D, 0xC003, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x1509, 0x1740, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x1610, 0x0010, HV_CTRL_ENABLE | HV_BUTTON_FROM_GD | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x1988, 0x1042, 0x1042, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1988, 0x107B, 0x9500, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1988, 0x14FF, 0x0F06, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1988, 0x1558, 0x8586, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1988, 0x161F, 0x2011, HV_CTRL_ENABLE, 0 },
/* Maestro3 chips */
{ 0x125D, 0x1998, 0x103C, 0x000E, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x103C, 0x0010, HV_CTRL_ENABLE, 1 }, /* HP OmniBook 6000 */
{ 0x125D, 0x1998, 0x103C, 0x0011, HV_CTRL_ENABLE, 1 }, /* HP OmniBook 500 */
{ 0x125D, 0x1998, 0x103C, 0x001B, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x104D, 0x80A6, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x104D, 0x80AA, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x107B, 0x5300, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x110A, 0x1998, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x13BD, 0x1015, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x13BD, 0x101C, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x13BD, 0x1802, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x1599, 0x0715, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x1998, 0x5643, 0x5643, HV_CTRL_ENABLE, 0 },
{ 0x125D, 0x199A, 0x144D, 0x3260, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x199A, 0x144D, 0x3261, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x199A, 0x144D, 0xC000, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
{ 0x125D, 0x199A, 0x144D, 0xC001, HV_CTRL_ENABLE | REDUCED_DEBOUNCE, 0 },
{ 0 }
};
/*
* lowlevel functions
@ -2392,21 +2464,27 @@ snd_m3_chip_init(m3_t *chip)
DISABLE_LEGACY);
pci_write_config_word(pcidev, PCI_LEGACY_AUDIO_CTRL, w);
/*
* Volume buttons on some HP OmniBook laptops (500 and 6000 at least)
* don't work correctly. This makes them work for the most part.
* Volume up and down buttons on the laptop side work perfectly.
* Fn+cursor_up (volme up) works, Fn+cursor_down (volume down) doesn't,
* Fn+F8 (mute) works acts as volume up.
*/
outw(~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_MASK);
outw(inw(io + GPIO_DIRECTION) & ~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DIRECTION);
outw((GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DATA);
outw(0xffff, io + GPIO_MASK);
if (chip->hv_quirk && chip->hv_quirk->is_omnibook) {
/*
* Volume buttons on some HP OmniBook laptops don't work
* correctly. This makes them work for the most part.
*
* Volume up and down buttons on the laptop side work.
* Fn+cursor_up (volme up) works.
* Fn+cursor_down (volume down) doesn't work.
* Fn+F7 (mute) works acts as volume up.
*/
outw(~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_MASK);
outw(inw(io + GPIO_DIRECTION) & ~(GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DIRECTION);
outw((GPI_VOL_DOWN|GPI_VOL_UP), io + GPIO_DATA);
outw(0xffff, io + GPIO_MASK);
}
pci_read_config_dword(pcidev, PCI_ALLEGRO_CONFIG, &n);
n &= ~HV_BUTTON_FROM_GD;
n |= HV_CTRL_ENABLE | REDUCED_DEBOUNCE;
n &= ~(HV_CTRL_ENABLE | REDUCED_DEBOUNCE | HV_BUTTON_FROM_GD);
if (chip->hv_quirk)
n |= chip->hv_quirk->config;
/* For some reason we must always use reduced debounce. */
n |= REDUCED_DEBOUNCE;
n |= PM_CTRL_ENABLE | CLK_DIV_BY_49 | USE_PCI_TIMING;
pci_write_config_dword(pcidev, PCI_ALLEGRO_CONFIG, n);
@ -2594,7 +2672,7 @@ snd_m3_create(snd_card_t *card, struct pci_dev *pci,
m3_t *chip;
int i, err;
struct m3_quirk *quirk;
u16 subsystem_vendor, subsystem_device;
struct m3_hv_quirk *hv_quirk;
static snd_device_ops_t ops = {
.dev_free = snd_m3_dev_free,
};
@ -2632,18 +2710,25 @@ snd_m3_create(snd_card_t *card, struct pci_dev *pci,
chip->pci = pci;
chip->irq = -1;
pci_read_config_word(pci, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vendor);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &subsystem_device);
for (quirk = m3_quirk_list; quirk->vendor; quirk++) {
if (subsystem_vendor == quirk->vendor &&
subsystem_device == quirk->device) {
if (pci->subsystem_vendor == quirk->vendor &&
pci->subsystem_device == quirk->device) {
printk(KERN_INFO "maestro3: enabled hack for '%s'\n", quirk->name);
chip->quirk = quirk;
break;
}
}
for (hv_quirk = m3_hv_quirk_list; hv_quirk->vendor; hv_quirk++) {
if (pci->vendor == hv_quirk->vendor &&
pci->device == hv_quirk->device &&
pci->subsystem_vendor == hv_quirk->subsystem_vendor &&
pci->subsystem_device == hv_quirk->subsystem_device) {
chip->hv_quirk = hv_quirk;
break;
}
}
chip->external_amp = enable_amp;
if (amp_gpio >= 0 && amp_gpio <= 0x0f)
chip->amp_gpio = amp_gpio;