OMAP1: Fix non-working LCD on OMAP310

This patch fixes bug introduced in revision:

f8e9e98454
omap1: DMA: move LCD related code from plat-omap to mach-omap1

The code introduced by this patch didn't consider any other CPUs but OMAP1510,
which rendered OMAP310 -- which has the same LCD controller -- non-working. Use
cpu_is_omap15xx() instead of cpu_is_omap1510() to squash this issue.

Bug found on Palm Zire 71 hardware.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Marek Vasut 2011-02-02 12:13:50 -08:00 committed by Tony Lindgren
parent daf7aabcc1
commit 719078a6bf

View file

@ -37,7 +37,7 @@ int omap_lcd_dma_running(void)
* On OMAP1510, internal LCD controller will start the transfer
* when it gets enabled, so assume DMA running if LCD enabled.
*/
if (cpu_is_omap1510())
if (cpu_is_omap15xx())
if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
return 1;
@ -95,7 +95,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
void omap_set_lcd_dma_b1_rotation(int rotate)
{
if (cpu_is_omap1510()) {
if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
BUG();
return;
@ -106,7 +106,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
void omap_set_lcd_dma_b1_mirror(int mirror)
{
if (cpu_is_omap1510()) {
if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
BUG();
}
@ -116,7 +116,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
{
if (cpu_is_omap1510()) {
if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA virtual resulotion is not supported "
"in 1510 mode\n");
BUG();
@ -127,7 +127,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
{
if (cpu_is_omap1510()) {
if (cpu_is_omap15xx()) {
printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
BUG();
}
@ -177,7 +177,7 @@ static void set_b1_regs(void)
bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
/* 1510 DMA requires the bottom address to be 2 more
* than the actual last memory access location. */
if (cpu_is_omap1510() &&
if (cpu_is_omap15xx() &&
lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
bottom += 2;
ei = PIXSTEP(0, 0, 1, 0);
@ -241,7 +241,7 @@ static void set_b1_regs(void)
return; /* Suppress warning about uninitialized vars */
}
if (cpu_is_omap1510()) {
if (cpu_is_omap15xx()) {
omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
@ -343,7 +343,7 @@ void omap_free_lcd_dma(void)
BUG();
return;
}
if (!cpu_is_omap1510())
if (!cpu_is_omap15xx())
omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
OMAP1610_DMA_LCD_CCR);
lcd_dma.reserved = 0;
@ -360,7 +360,7 @@ void omap_enable_lcd_dma(void)
* connected. Otherwise the OMAP internal controller will
* start the transfer when it gets enabled.
*/
if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
return;
w = omap_readw(OMAP1610_DMA_LCD_CTRL);
@ -378,14 +378,14 @@ EXPORT_SYMBOL(omap_enable_lcd_dma);
void omap_setup_lcd_dma(void)
{
BUG_ON(lcd_dma.active);
if (!cpu_is_omap1510()) {
if (!cpu_is_omap15xx()) {
/* Set some reasonable defaults */
omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
}
set_b1_regs();
if (!cpu_is_omap1510()) {
if (!cpu_is_omap15xx()) {
u16 w;
w = omap_readw(OMAP1610_DMA_LCD_CCR);
@ -407,7 +407,7 @@ void omap_stop_lcd_dma(void)
u16 w;
lcd_dma.active = 0;
if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
return;
w = omap_readw(OMAP1610_DMA_LCD_CCR);