mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
dt-bindings: regulator/mfd: Reorganize S2MPA01 bindings
The mfd/s2mpa01.txt duplicates some of the information about bindings with old mfd/s2mps11.txt. Now common part exists entirely in mfd/samsung,sec-core.txt so: - add company prefix to file name (regulator/samsung,s2mpa01.txt), - remove duplicated information, - reorganize the contents to match style of regulator/samsung,s2mps11.txt. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
parent
27383ca93b
commit
5d1d147f04
3 changed files with 82 additions and 91 deletions
|
@ -1,90 +0,0 @@
|
|||
|
||||
* Samsung S2MPA01 Voltage and Current Regulator
|
||||
|
||||
The Samsung S2MPA01 is a multi-function device which includes high
|
||||
efficiency buck converters including Dual-Phase buck converter, various LDOs,
|
||||
and an RTC. It is interfaced to the host controller using an I2C interface.
|
||||
Each sub-block is addressed by the host system using different I2C slave
|
||||
addresses.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "samsung,s2mpa01-pmic".
|
||||
- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
|
||||
|
||||
Optional properties:
|
||||
- interrupt-parent: Specifies the phandle of the interrupt controller to which
|
||||
the interrupts from s2mpa01 are delivered to.
|
||||
- interrupts: An interrupt specifier for the sole interrupt generated by the
|
||||
device.
|
||||
|
||||
Optional nodes:
|
||||
- regulators: The regulators of s2mpa01 that have to be instantiated should be
|
||||
included in a sub-node named 'regulators'. Regulator nodes and constraints
|
||||
included in this sub-node use the standard regulator bindings which are
|
||||
documented elsewhere.
|
||||
|
||||
Properties for BUCK regulator nodes:
|
||||
- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
|
||||
(default), 25000, or 50000. May be 0 for disabling the ramp delay on
|
||||
BUCK{1,2,3,4}.
|
||||
|
||||
In the absence of the regulator-ramp-delay property, the default ramp
|
||||
delay will be used.
|
||||
|
||||
NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
|
||||
for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
|
||||
|
||||
The following BUCKs share ramp settings:
|
||||
* 1 and 6
|
||||
* 2 and 4
|
||||
* 8, 9, and 10
|
||||
|
||||
The following are the names of the regulators that the s2mpa01 PMIC block
|
||||
supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
||||
as per the datasheet of s2mpa01.
|
||||
|
||||
- LDOn
|
||||
- valid values for n are 1 to 26
|
||||
- Example: LDO1, LD02, LDO26
|
||||
- BUCKn
|
||||
- valid values for n are 1 to 10.
|
||||
- Example: BUCK1, BUCK2, BUCK9
|
||||
|
||||
Example:
|
||||
|
||||
s2mpa01_pmic@66 {
|
||||
compatible = "samsung,s2mpa01-pmic";
|
||||
reg = <0x66>;
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VDD_ALIVE";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "VDDQ_MMC2";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-ramp-delay = <50000>;
|
||||
};
|
||||
};
|
||||
};
|
|
@ -4,7 +4,7 @@ Binding for Samsung S2M and S5M family multi-function device
|
|||
This is a part of device tree bindings for S2M and S5M family multi-function
|
||||
devices.
|
||||
|
||||
The Samsung S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
|
||||
The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
|
||||
of multi-function devices which include voltage and current regulators, RTC,
|
||||
charger controller, clock outputs and other sub-blocks. It is interfaced
|
||||
to the host controller using an I2C interface. Each sub-block is usually
|
||||
|
@ -13,6 +13,7 @@ addressed by the host system using different I2C slave addresses.
|
|||
|
||||
This document describes bindings for main device node. Optional sub-blocks
|
||||
must be a sub-nodes to it. Bindings for them can be found in:
|
||||
- bindings/regulator/samsung,s2mpa01.txt
|
||||
- bindings/regulator/samsung,s2mps11.txt
|
||||
- bindings/regulator/samsung,s5m8767.txt
|
||||
- bindings/clock/samsung,s2mps11.txt
|
||||
|
@ -20,6 +21,7 @@ must be a sub-nodes to it. Bindings for them can be found in:
|
|||
|
||||
Required properties:
|
||||
- compatible: Should be one of the following
|
||||
- "samsung,s2mpa01-pmic",
|
||||
- "samsung,s2mps11-pmic",
|
||||
- "samsung,s2mps13-pmic",
|
||||
- "samsung,s2mps14-pmic",
|
||||
|
|
|
@ -0,0 +1,79 @@
|
|||
Binding for Samsung S2MPA01 regulator block
|
||||
===========================================
|
||||
|
||||
This is a part of device tree bindings for S2M family multi-function devices.
|
||||
More information can be found in bindings/mfd/sec-core.txt file.
|
||||
|
||||
The S2MPA01 device provide buck and LDO regulators.
|
||||
|
||||
To register these with regulator framework instantiate under main device node
|
||||
a sub-node named "regulators" with more sub-nodes for each regulator using the
|
||||
common regulator binding documented in:
|
||||
- Documentation/devicetree/bindings/regulator/regulator.txt
|
||||
|
||||
|
||||
Names of regulators supported by S2MPA01 device:
|
||||
- LDOn
|
||||
- valid values for n are 1 to 26
|
||||
- Example: LDO1, LD02, LDO26
|
||||
- BUCKn
|
||||
- valid values for n are 1 to 10.
|
||||
- Example: BUCK1, BUCK2, BUCK9
|
||||
Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
||||
as per the datasheet of device.
|
||||
|
||||
|
||||
Optional properties of buck regulator nodes under "regulators" sub-node:
|
||||
- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
|
||||
(default), 25000, or 50000. May be 0 for disabling the ramp delay on
|
||||
BUCK{1,2,3,4}.
|
||||
|
||||
In the absence of the regulator-ramp-delay property, the default ramp
|
||||
delay will be used.
|
||||
|
||||
Note: Some bucks share the ramp rate setting i.e. same ramp value
|
||||
will be set for a particular group of bucks so provide the same
|
||||
regulator-ramp-delay value for them.
|
||||
Groups sharing ramp rate:
|
||||
- buck{1,6},
|
||||
- buck{2,4},
|
||||
- buck{8,9,10}.
|
||||
|
||||
Example:
|
||||
|
||||
s2mpa01_pmic@66 {
|
||||
compatible = "samsung,s2mpa01-pmic";
|
||||
reg = <0x66>;
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VDD_ALIVE";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "VDDQ_MMC2";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-ramp-delay = <50000>;
|
||||
};
|
||||
};
|
||||
};
|
Loading…
Reference in a new issue