Drivers: hv: fcopy: switch to using the hvutil_device_state state machine

Switch to using the hvutil_device_state state machine from using 3 different state variables:
fcopy_transaction.active, opened, and in_hand_shake.

State transitions are:
-> HVUTIL_DEVICE_INIT when driver loads or on device release
-> HVUTIL_READY if the handshake was successful
-> HVUTIL_HOSTMSG_RECEIVED when there is a non-negotiation message from the host
-> HVUTIL_USERSPACE_REQ after userspace daemon read the message
   -> HVUTIL_USERSPACE_RECV after/if userspace has replied
-> HVUTIL_READY after we respond to the host
-> HVUTIL_DEVICE_DYING on driver unload

In hv_fcopy_onchannelcallback() process ICMSGTYPE_NEGOTIATE messages even when
the userspace daemon is disconnected, otherwise we can make the host think
we don't support FCOPY and disable the service completely.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Vitaly Kuznetsov 2015-04-11 18:07:49 -07:00 committed by Greg Kroah-Hartman
parent 086a6f68d6
commit 4c93ccccf4

View file

@ -47,15 +47,10 @@
* ensure this by serializing packet processing in this driver - we do not
* read additional packets from the VMBUs until the current packet is fully
* handled.
*
* The transaction "active" state is set when we receive a request from the
* host and we cleanup this state when the transaction is completed - when we
* respond to the host with our response. When the transaction active state is
* set, we defer handling incoming packets.
*/
static struct {
bool active; /* transaction status - active or not */
int state; /* hvutil_device_state */
int recv_len; /* number of bytes received. */
struct hv_fcopy_hdr *fcopy_msg; /* current message */
struct hv_start_fcopy message; /* sent to daemon */
@ -65,14 +60,6 @@ static struct {
struct semaphore read_sema;
} fcopy_transaction;
static bool opened; /* currently device opened */
/*
* Before we can accept copy messages from the host, we need
* to handshake with the user level daemon. This state tracks
* if we are in the handshake phase.
*/
static bool in_hand_shake = true;
static void fcopy_send_data(void);
static void fcopy_respond_to_host(int error);
static void fcopy_timeout_func(struct work_struct *dummy);
@ -87,6 +74,10 @@ static void fcopy_timeout_func(struct work_struct *dummy)
*/
fcopy_respond_to_host(HV_E_FAIL);
/* Transaction is finished, reset the state. */
if (fcopy_transaction.state > HVUTIL_READY)
fcopy_transaction.state = HVUTIL_READY;
/* In the case the user-space daemon crashes, hangs or is killed, we
* need to down the semaphore, otherwise, after the daemon starts next
* time, the obsolete data in fcopy_transaction.message or
@ -118,10 +109,9 @@ static int fcopy_handle_handshake(u32 version)
}
pr_info("FCP: user-mode registering done. Daemon version: %d\n",
version);
fcopy_transaction.active = false;
fcopy_transaction.state = HVUTIL_READY;
hv_poll_channel(fcopy_transaction.fcopy_context,
hv_fcopy_onchannelcallback);
in_hand_shake = false;
return 0;
}
@ -191,8 +181,6 @@ fcopy_respond_to_host(int error)
channel = fcopy_transaction.recv_channel;
req_id = fcopy_transaction.recv_req_id;
fcopy_transaction.active = false;
icmsghdr = (struct icmsg_hdr *)
&recv_buffer[sizeof(struct vmbuspipe_hdr)];
@ -220,7 +208,7 @@ void hv_fcopy_onchannelcallback(void *context)
int util_fw_version;
int fcopy_srv_version;
if (fcopy_transaction.active) {
if (fcopy_transaction.state > HVUTIL_READY) {
/*
* We will defer processing this callback once
* the current transaction is complete.
@ -252,12 +240,18 @@ void hv_fcopy_onchannelcallback(void *context)
* transaction; note transactions are serialized.
*/
fcopy_transaction.active = true;
fcopy_transaction.recv_len = recvlen;
fcopy_transaction.recv_channel = channel;
fcopy_transaction.recv_req_id = requestid;
fcopy_transaction.fcopy_msg = fcopy_msg;
if (fcopy_transaction.state < HVUTIL_READY) {
/* Userspace is not registered yet */
fcopy_respond_to_host(HV_E_FAIL);
return;
}
fcopy_transaction.state = HVUTIL_HOSTMSG_RECEIVED;
/*
* Send the information to the user-level daemon.
*/
@ -290,10 +284,10 @@ static ssize_t fcopy_read(struct file *file, char __user *buf,
/*
* The channel may be rescinded and in this case, we will wakeup the
* the thread blocked on the semaphore and we will use the opened
* state to correctly handle this case.
* the thread blocked on the semaphore and we will use the state to
* correctly handle this case.
*/
if (!opened)
if (fcopy_transaction.state != HVUTIL_HOSTMSG_RECEIVED)
return -ENODEV;
operation = fcopy_transaction.fcopy_msg->operation;
@ -312,6 +306,8 @@ static ssize_t fcopy_read(struct file *file, char __user *buf,
if (copy_to_user(buf, src, copy_size))
return -EFAULT;
fcopy_transaction.state = HVUTIL_USERSPACE_REQ;
return copy_size;
}
@ -326,18 +322,23 @@ static ssize_t fcopy_write(struct file *file, const char __user *buf,
if (copy_from_user(&response, buf, sizeof(int)))
return -EFAULT;
if (in_hand_shake) {
if (fcopy_transaction.state == HVUTIL_DEVICE_INIT) {
if (fcopy_handle_handshake(response))
return -EINVAL;
return sizeof(int);
}
if (fcopy_transaction.state != HVUTIL_USERSPACE_REQ)
return -EINVAL;
/*
* Complete the transaction by forwarding the result
* to the host. But first, cancel the timeout.
*/
if (cancel_delayed_work_sync(&fcopy_timeout_work))
if (cancel_delayed_work_sync(&fcopy_timeout_work)) {
fcopy_transaction.state = HVUTIL_USERSPACE_RECV;
fcopy_respond_to_host(response);
fcopy_transaction.state = HVUTIL_READY;
hv_poll_channel(fcopy_transaction.fcopy_context,
hv_fcopy_onchannelcallback);
}
@ -352,13 +353,9 @@ static int fcopy_open(struct inode *inode, struct file *f)
* really an extension of this driver. We can have only
* active open at a time.
*/
if (opened)
if (fcopy_transaction.state != HVUTIL_DEVICE_INIT)
return -EBUSY;
/*
* The daemon is alive; setup the state.
*/
opened = true;
return 0;
}
@ -375,8 +372,7 @@ static int fcopy_release(struct inode *inode, struct file *f)
/*
* The daemon has exited; reset the state.
*/
in_hand_shake = true;
opened = false;
fcopy_transaction.state = HVUTIL_DEVICE_INIT;
if (cancel_delayed_work_sync(&fcopy_timeout_work)) {
/* We haven't up()-ed the semaphore(very rare)? */
@ -409,13 +405,6 @@ static int fcopy_dev_init(void)
static void fcopy_dev_deinit(void)
{
/*
* The device is going away - perhaps because the
* host has rescinded the channel. Setup state so that
* user level daemon can gracefully exit if it is blocked
* on the read semaphore.
*/
opened = false;
/*
* Signal the semaphore as the device is
* going away.
@ -434,7 +423,7 @@ int hv_fcopy_init(struct hv_util_service *srv)
* Defer processing channel callbacks until the daemon
* has registered.
*/
fcopy_transaction.active = true;
fcopy_transaction.state = HVUTIL_DEVICE_INIT;
sema_init(&fcopy_transaction.read_sema, 0);
return fcopy_dev_init();
@ -442,6 +431,7 @@ int hv_fcopy_init(struct hv_util_service *srv)
void hv_fcopy_deinit(void)
{
fcopy_transaction.state = HVUTIL_DEVICE_DYING;
cancel_delayed_work_sync(&fcopy_timeout_work);
fcopy_dev_deinit();
}