mirror of
https://github.com/torvalds/linux
synced 2024-09-06 18:01:05 +00:00
Documentation: drop more IDE boot options and ide-cd.rst
Drop ide-* command line options.
Drop cdrom/ide-cd.rst documentation.
Fixes: 898ee22c32
("Drop Documentation/ide/")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220424033701.7988-1-rdunlap@infradead.org
[jc: also deleted reference from cdrom/index.rst]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
parent
f1a693994b
commit
4a840d5fdc
|
@ -1792,26 +1792,6 @@
|
|||
icn= [HW,ISDN]
|
||||
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
|
||||
|
||||
ide-core.nodma= [HW] (E)IDE subsystem
|
||||
Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
|
||||
.vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
|
||||
.cdrom .chs .ignore_cable are additional options
|
||||
See Documentation/ide/ide.rst.
|
||||
|
||||
ide-generic.probe-mask= [HW] (E)IDE subsystem
|
||||
Format: <int>
|
||||
Probe mask for legacy ISA IDE ports. Depending on
|
||||
platform up to 6 ports are supported, enabled by
|
||||
setting corresponding bits in the mask to 1. The
|
||||
default value is 0x0, which has a special meaning.
|
||||
On systems that have PCI, it triggers scanning the
|
||||
PCI bus for the first and the second port, which
|
||||
are then probed. On systems without PCI the value
|
||||
of 0x0 enables probing the two first ports as if it
|
||||
was 0x3.
|
||||
|
||||
ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
|
||||
Claim all unknown PCI IDE storage controllers.
|
||||
|
||||
idle= [X86]
|
||||
Format: idle=poll, idle=halt, idle=nomwait
|
||||
|
|
|
@ -1,538 +0,0 @@
|
|||
IDE-CD driver documentation
|
||||
===========================
|
||||
|
||||
:Originally by: scott snyder <snyder@fnald0.fnal.gov> (19 May 1996)
|
||||
:Carrying on the torch is: Erik Andersen <andersee@debian.org>
|
||||
:New maintainers (19 Oct 1998): Jens Axboe <axboe@image.dk>
|
||||
|
||||
1. Introduction
|
||||
---------------
|
||||
|
||||
The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant
|
||||
CDROM drives which attach to an IDE interface. Note that some CDROM vendors
|
||||
(including Mitsumi, Sony, Creative, Aztech, and Goldstar) have made
|
||||
both ATAPI-compliant drives and drives which use a proprietary
|
||||
interface. If your drive uses one of those proprietary interfaces,
|
||||
this driver will not work with it (but one of the other CDROM drivers
|
||||
probably will). This driver will not work with `ATAPI` drives which
|
||||
attach to the parallel port. In addition, there is at least one drive
|
||||
(CyCDROM CR520ie) which attaches to the IDE port but is not ATAPI;
|
||||
this driver will not work with drives like that either (but see the
|
||||
aztcd driver).
|
||||
|
||||
This driver provides the following features:
|
||||
|
||||
- Reading from data tracks, and mounting ISO 9660 filesystems.
|
||||
|
||||
- Playing audio tracks. Most of the CDROM player programs floating
|
||||
around should work; I usually use Workman.
|
||||
|
||||
- Multisession support.
|
||||
|
||||
- On drives which support it, reading digital audio data directly
|
||||
from audio tracks. The program cdda2wav can be used for this.
|
||||
Note, however, that only some drives actually support this.
|
||||
|
||||
- There is now support for CDROM changers which comply with the
|
||||
ATAPI 2.6 draft standard (such as the NEC CDR-251). This additional
|
||||
functionality includes a function call to query which slot is the
|
||||
currently selected slot, a function call to query which slots contain
|
||||
CDs, etc. A sample program which demonstrates this functionality is
|
||||
appended to the end of this file. The Sanyo 3-disc changer
|
||||
(which does not conform to the standard) is also now supported.
|
||||
Please note the driver refers to the first CD as slot # 0.
|
||||
|
||||
|
||||
2. Installation
|
||||
---------------
|
||||
|
||||
0. The ide-cd relies on the ide disk driver. See
|
||||
Documentation/ide/ide.rst for up-to-date information on the ide
|
||||
driver.
|
||||
|
||||
1. Make sure that the ide and ide-cd drivers are compiled into the
|
||||
kernel you're using. When configuring the kernel, in the section
|
||||
entitled "Floppy, IDE, and other block devices", say either `Y`
|
||||
(which will compile the support directly into the kernel) or `M`
|
||||
(to compile support as a module which can be loaded and unloaded)
|
||||
to the options::
|
||||
|
||||
ATA/ATAPI/MFM/RLL support
|
||||
Include IDE/ATAPI CDROM support
|
||||
|
||||
Depending on what type of IDE interface you have, you may need to
|
||||
specify additional configuration options. See
|
||||
Documentation/ide/ide.rst.
|
||||
|
||||
2. You should also ensure that the iso9660 filesystem is either
|
||||
compiled into the kernel or available as a loadable module. You
|
||||
can see if a filesystem is known to the kernel by catting
|
||||
/proc/filesystems.
|
||||
|
||||
3. The CDROM drive should be connected to the host on an IDE
|
||||
interface. Each interface on a system is defined by an I/O port
|
||||
address and an IRQ number, the standard assignments being
|
||||
0x1f0 and 14 for the primary interface and 0x170 and 15 for the
|
||||
secondary interface. Each interface can control up to two devices,
|
||||
where each device can be a hard drive, a CDROM drive, a floppy drive,
|
||||
or a tape drive. The two devices on an interface are called `master`
|
||||
and `slave`; this is usually selectable via a jumper on the drive.
|
||||
|
||||
Linux names these devices as follows. The master and slave devices
|
||||
on the primary IDE interface are called `hda` and `hdb`,
|
||||
respectively. The drives on the secondary interface are called
|
||||
`hdc` and `hdd`. (Interfaces at other locations get other letters
|
||||
in the third position; see Documentation/ide/ide.rst.)
|
||||
|
||||
If you want your CDROM drive to be found automatically by the
|
||||
driver, you should make sure your IDE interface uses either the
|
||||
primary or secondary addresses mentioned above. In addition, if
|
||||
the CDROM drive is the only device on the IDE interface, it should
|
||||
be jumpered as `master`. (If for some reason you cannot configure
|
||||
your system in this manner, you can probably still use the driver.
|
||||
You may have to pass extra configuration information to the kernel
|
||||
when you boot, however. See Documentation/ide/ide.rst for more
|
||||
information.)
|
||||
|
||||
4. Boot the system. If the drive is recognized, you should see a
|
||||
message which looks like::
|
||||
|
||||
hdb: NEC CD-ROM DRIVE:260, ATAPI CDROM drive
|
||||
|
||||
If you do not see this, see section 5 below.
|
||||
|
||||
5. You may want to create a symbolic link /dev/cdrom pointing to the
|
||||
actual device. You can do this with the command::
|
||||
|
||||
ln -s /dev/hdX /dev/cdrom
|
||||
|
||||
where X should be replaced by the letter indicating where your
|
||||
drive is installed.
|
||||
|
||||
6. You should be able to see any error messages from the driver with
|
||||
the `dmesg` command.
|
||||
|
||||
|
||||
3. Basic usage
|
||||
--------------
|
||||
|
||||
An ISO 9660 CDROM can be mounted by putting the disc in the drive and
|
||||
typing (as root)::
|
||||
|
||||
mount -t iso9660 /dev/cdrom /mnt/cdrom
|
||||
|
||||
where it is assumed that /dev/cdrom is a link pointing to the actual
|
||||
device (as described in step 5 of the last section) and /mnt/cdrom is
|
||||
an empty directory. You should now be able to see the contents of the
|
||||
CDROM under the /mnt/cdrom directory. If you want to eject the CDROM,
|
||||
you must first dismount it with a command like::
|
||||
|
||||
umount /mnt/cdrom
|
||||
|
||||
Note that audio CDs cannot be mounted.
|
||||
|
||||
Some distributions set up /etc/fstab to always try to mount a CDROM
|
||||
filesystem on bootup. It is not required to mount the CDROM in this
|
||||
manner, though, and it may be a nuisance if you change CDROMs often.
|
||||
You should feel free to remove the cdrom line from /etc/fstab and
|
||||
mount CDROMs manually if that suits you better.
|
||||
|
||||
Multisession and photocd discs should work with no special handling.
|
||||
The hpcdtoppm package (ftp.gwdg.de:/pub/linux/hpcdtoppm/) may be
|
||||
useful for reading photocds.
|
||||
|
||||
To play an audio CD, you should first unmount and remove any data
|
||||
CDROM. Any of the CDROM player programs should then work (workman,
|
||||
workbone, cdplayer, etc.).
|
||||
|
||||
On a few drives, you can read digital audio directly using a program
|
||||
such as cdda2wav. The only types of drive which I've heard support
|
||||
this are Sony and Toshiba drives. You will get errors if you try to
|
||||
use this function on a drive which does not support it.
|
||||
|
||||
For supported changers, you can use the `cdchange` program (appended to
|
||||
the end of this file) to switch between changer slots. Note that the
|
||||
drive should be unmounted before attempting this. The program takes
|
||||
two arguments: the CDROM device, and the slot number to which you wish
|
||||
to change. If the slot number is -1, the drive is unloaded.
|
||||
|
||||
|
||||
4. Common problems
|
||||
------------------
|
||||
|
||||
This section discusses some common problems encountered when trying to
|
||||
use the driver, and some possible solutions. Note that if you are
|
||||
experiencing problems, you should probably also review
|
||||
Documentation/ide/ide.rst for current information about the underlying
|
||||
IDE support code. Some of these items apply only to earlier versions
|
||||
of the driver, but are mentioned here for completeness.
|
||||
|
||||
In most cases, you should probably check with `dmesg` for any errors
|
||||
from the driver.
|
||||
|
||||
a. Drive is not detected during booting.
|
||||
|
||||
- Review the configuration instructions above and in
|
||||
Documentation/ide/ide.rst, and check how your hardware is
|
||||
configured.
|
||||
|
||||
- If your drive is the only device on an IDE interface, it should
|
||||
be jumpered as master, if at all possible.
|
||||
|
||||
- If your IDE interface is not at the standard addresses of 0x170
|
||||
or 0x1f0, you'll need to explicitly inform the driver using a
|
||||
lilo option. See Documentation/ide/ide.rst. (This feature was
|
||||
added around kernel version 1.3.30.)
|
||||
|
||||
- If the autoprobing is not finding your drive, you can tell the
|
||||
driver to assume that one exists by using a lilo option of the
|
||||
form `hdX=cdrom`, where X is the drive letter corresponding to
|
||||
where your drive is installed. Note that if you do this and you
|
||||
see a boot message like::
|
||||
|
||||
hdX: ATAPI cdrom (?)
|
||||
|
||||
this does _not_ mean that the driver has successfully detected
|
||||
the drive; rather, it means that the driver has not detected a
|
||||
drive, but is assuming there's one there anyway because you told
|
||||
it so. If you actually try to do I/O to a drive defined at a
|
||||
nonexistent or nonresponding I/O address, you'll probably get
|
||||
errors with a status value of 0xff.
|
||||
|
||||
- Some IDE adapters require a nonstandard initialization sequence
|
||||
before they'll function properly. (If this is the case, there
|
||||
will often be a separate MS-DOS driver just for the controller.)
|
||||
IDE interfaces on sound cards often fall into this category.
|
||||
|
||||
Support for some interfaces needing extra initialization is
|
||||
provided in later 1.3.x kernels. You may need to turn on
|
||||
additional kernel configuration options to get them to work;
|
||||
see Documentation/ide/ide.rst.
|
||||
|
||||
Even if support is not available for your interface, you may be
|
||||
able to get it to work with the following procedure. First boot
|
||||
MS-DOS and load the appropriate drivers. Then warm-boot linux
|
||||
(i.e., without powering off). If this works, it can be automated
|
||||
by running loadlin from the MS-DOS autoexec.
|
||||
|
||||
|
||||
b. Timeout/IRQ errors.
|
||||
|
||||
- If you always get timeout errors, interrupts from the drive are
|
||||
probably not making it to the host.
|
||||
|
||||
- IRQ problems may also be indicated by the message
|
||||
`IRQ probe failed (<n>)` while booting. If <n> is zero, that
|
||||
means that the system did not see an interrupt from the drive when
|
||||
it was expecting one (on any feasible IRQ). If <n> is negative,
|
||||
that means the system saw interrupts on multiple IRQ lines, when
|
||||
it was expecting to receive just one from the CDROM drive.
|
||||
|
||||
- Double-check your hardware configuration to make sure that the IRQ
|
||||
number of your IDE interface matches what the driver expects.
|
||||
(The usual assignments are 14 for the primary (0x1f0) interface
|
||||
and 15 for the secondary (0x170) interface.) Also be sure that
|
||||
you don't have some other hardware which might be conflicting with
|
||||
the IRQ you're using. Also check the BIOS setup for your system;
|
||||
some have the ability to disable individual IRQ levels, and I've
|
||||
had one report of a system which was shipped with IRQ 15 disabled
|
||||
by default.
|
||||
|
||||
- Note that many MS-DOS CDROM drivers will still function even if
|
||||
there are hardware problems with the interrupt setup; they
|
||||
apparently don't use interrupts.
|
||||
|
||||
- If you own a Pioneer DR-A24X, you _will_ get nasty error messages
|
||||
on boot such as "irq timeout: status=0x50 { DriveReady SeekComplete }"
|
||||
The Pioneer DR-A24X CDROM drives are fairly popular these days.
|
||||
Unfortunately, these drives seem to become very confused when we perform
|
||||
the standard Linux ATA disk drive probe. If you own one of these drives,
|
||||
you can bypass the ATA probing which confuses these CDROM drives, by
|
||||
adding `append="hdX=noprobe hdX=cdrom"` to your lilo.conf file and running
|
||||
lilo (again where X is the drive letter corresponding to where your drive
|
||||
is installed.)
|
||||
|
||||
c. System hangups.
|
||||
|
||||
- If the system locks up when you try to access the CDROM, the most
|
||||
likely cause is that you have a buggy IDE adapter which doesn't
|
||||
properly handle simultaneous transactions on multiple interfaces.
|
||||
The most notorious of these is the CMD640B chip. This problem can
|
||||
be worked around by specifying the `serialize` option when
|
||||
booting. Recent kernels should be able to detect the need for
|
||||
this automatically in most cases, but the detection is not
|
||||
foolproof. See Documentation/ide/ide.rst for more information
|
||||
about the `serialize` option and the CMD640B.
|
||||
|
||||
- Note that many MS-DOS CDROM drivers will work with such buggy
|
||||
hardware, apparently because they never attempt to overlap CDROM
|
||||
operations with other disk activity.
|
||||
|
||||
|
||||
d. Can't mount a CDROM.
|
||||
|
||||
- If you get errors from mount, it may help to check `dmesg` to see
|
||||
if there are any more specific errors from the driver or from the
|
||||
filesystem.
|
||||
|
||||
- Make sure there's a CDROM loaded in the drive, and that's it's an
|
||||
ISO 9660 disc. You can't mount an audio CD.
|
||||
|
||||
- With the CDROM in the drive and unmounted, try something like::
|
||||
|
||||
cat /dev/cdrom | od | more
|
||||
|
||||
If you see a dump, then the drive and driver are probably working
|
||||
OK, and the problem is at the filesystem level (i.e., the CDROM is
|
||||
not ISO 9660 or has errors in the filesystem structure).
|
||||
|
||||
- If you see `not a block device` errors, check that the definitions
|
||||
of the device special files are correct. They should be as
|
||||
follows::
|
||||
|
||||
brw-rw---- 1 root disk 3, 0 Nov 11 18:48 /dev/hda
|
||||
brw-rw---- 1 root disk 3, 64 Nov 11 18:48 /dev/hdb
|
||||
brw-rw---- 1 root disk 22, 0 Nov 11 18:48 /dev/hdc
|
||||
brw-rw---- 1 root disk 22, 64 Nov 11 18:48 /dev/hdd
|
||||
|
||||
Some early Slackware releases had these defined incorrectly. If
|
||||
these are wrong, you can remake them by running the script
|
||||
scripts/MAKEDEV.ide. (You may have to make it executable
|
||||
with chmod first.)
|
||||
|
||||
If you have a /dev/cdrom symbolic link, check that it is pointing
|
||||
to the correct device file.
|
||||
|
||||
If you hear people talking of the devices `hd1a` and `hd1b`, these
|
||||
were old names for what are now called hdc and hdd. Those names
|
||||
should be considered obsolete.
|
||||
|
||||
- If mount is complaining that the iso9660 filesystem is not
|
||||
available, but you know it is (check /proc/filesystems), you
|
||||
probably need a newer version of mount. Early versions would not
|
||||
always give meaningful error messages.
|
||||
|
||||
|
||||
e. Directory listings are unpredictably truncated, and `dmesg` shows
|
||||
`buffer botch` error messages from the driver.
|
||||
|
||||
- There was a bug in the version of the driver in 1.2.x kernels
|
||||
which could cause this. It was fixed in 1.3.0. If you can't
|
||||
upgrade, you can probably work around the problem by specifying a
|
||||
blocksize of 2048 when mounting. (Note that you won't be able to
|
||||
directly execute binaries off the CDROM in that case.)
|
||||
|
||||
If you see this in kernels later than 1.3.0, please report it as a
|
||||
bug.
|
||||
|
||||
|
||||
f. Data corruption.
|
||||
|
||||
- Random data corruption was occasionally observed with the Hitachi
|
||||
CDR-7730 CDROM. If you experience data corruption, using "hdx=slow"
|
||||
as a command line parameter may work around the problem, at the
|
||||
expense of low system performance.
|
||||
|
||||
|
||||
5. cdchange.c
|
||||
-------------
|
||||
|
||||
::
|
||||
|
||||
/*
|
||||
* cdchange.c [-v] <device> [<slot>]
|
||||
*
|
||||
* This loads a CDROM from a specified slot in a changer, and displays
|
||||
* information about the changer status. The drive should be unmounted before
|
||||
* using this program.
|
||||
*
|
||||
* Changer information is displayed if either the -v flag is specified
|
||||
* or no slot was specified.
|
||||
*
|
||||
* Based on code originally from Gerhard Zuber <zuber@berlin.snafu.de>.
|
||||
* Changer status information, and rewrite for the new Uniform CDROM driver
|
||||
* interface by Erik Andersen <andersee@debian.org>.
|
||||
*/
|
||||
|
||||
#include <stdio.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <string.h>
|
||||
#include <unistd.h>
|
||||
#include <fcntl.h>
|
||||
#include <sys/ioctl.h>
|
||||
#include <linux/cdrom.h>
|
||||
|
||||
|
||||
int
|
||||
main (int argc, char **argv)
|
||||
{
|
||||
char *program;
|
||||
char *device;
|
||||
int fd; /* file descriptor for CD-ROM device */
|
||||
int status; /* return status for system calls */
|
||||
int verbose = 0;
|
||||
int slot=-1, x_slot;
|
||||
int total_slots_available;
|
||||
|
||||
program = argv[0];
|
||||
|
||||
++argv;
|
||||
--argc;
|
||||
|
||||
if (argc < 1 || argc > 3) {
|
||||
fprintf (stderr, "usage: %s [-v] <device> [<slot>]\n",
|
||||
program);
|
||||
fprintf (stderr, " Slots are numbered 1 -- n.\n");
|
||||
exit (1);
|
||||
}
|
||||
|
||||
if (strcmp (argv[0], "-v") == 0) {
|
||||
verbose = 1;
|
||||
++argv;
|
||||
--argc;
|
||||
}
|
||||
|
||||
device = argv[0];
|
||||
|
||||
if (argc == 2)
|
||||
slot = atoi (argv[1]) - 1;
|
||||
|
||||
/* open device */
|
||||
fd = open(device, O_RDONLY | O_NONBLOCK);
|
||||
if (fd < 0) {
|
||||
fprintf (stderr, "%s: open failed for `%s`: %s\n",
|
||||
program, device, strerror (errno));
|
||||
exit (1);
|
||||
}
|
||||
|
||||
/* Check CD player status */
|
||||
total_slots_available = ioctl (fd, CDROM_CHANGER_NSLOTS);
|
||||
if (total_slots_available <= 1 ) {
|
||||
fprintf (stderr, "%s: Device `%s` is not an ATAPI "
|
||||
"compliant CD changer.\n", program, device);
|
||||
exit (1);
|
||||
}
|
||||
|
||||
if (slot >= 0) {
|
||||
if (slot >= total_slots_available) {
|
||||
fprintf (stderr, "Bad slot number. "
|
||||
"Should be 1 -- %d.\n",
|
||||
total_slots_available);
|
||||
exit (1);
|
||||
}
|
||||
|
||||
/* load */
|
||||
slot=ioctl (fd, CDROM_SELECT_DISC, slot);
|
||||
if (slot<0) {
|
||||
fflush(stdout);
|
||||
perror ("CDROM_SELECT_DISC ");
|
||||
exit(1);
|
||||
}
|
||||
}
|
||||
|
||||
if (slot < 0 || verbose) {
|
||||
|
||||
status=ioctl (fd, CDROM_SELECT_DISC, CDSL_CURRENT);
|
||||
if (status<0) {
|
||||
fflush(stdout);
|
||||
perror (" CDROM_SELECT_DISC");
|
||||
exit(1);
|
||||
}
|
||||
slot=status;
|
||||
|
||||
printf ("Current slot: %d\n", slot+1);
|
||||
printf ("Total slots available: %d\n",
|
||||
total_slots_available);
|
||||
|
||||
printf ("Drive status: ");
|
||||
status = ioctl (fd, CDROM_DRIVE_STATUS, CDSL_CURRENT);
|
||||
if (status<0) {
|
||||
perror(" CDROM_DRIVE_STATUS");
|
||||
} else switch(status) {
|
||||
case CDS_DISC_OK:
|
||||
printf ("Ready.\n");
|
||||
break;
|
||||
case CDS_TRAY_OPEN:
|
||||
printf ("Tray Open.\n");
|
||||
break;
|
||||
case CDS_DRIVE_NOT_READY:
|
||||
printf ("Drive Not Ready.\n");
|
||||
break;
|
||||
default:
|
||||
printf ("This Should not happen!\n");
|
||||
break;
|
||||
}
|
||||
|
||||
for (x_slot=0; x_slot<total_slots_available; x_slot++) {
|
||||
printf ("Slot %2d: ", x_slot+1);
|
||||
status = ioctl (fd, CDROM_DRIVE_STATUS, x_slot);
|
||||
if (status<0) {
|
||||
perror(" CDROM_DRIVE_STATUS");
|
||||
} else switch(status) {
|
||||
case CDS_DISC_OK:
|
||||
printf ("Disc present.");
|
||||
break;
|
||||
case CDS_NO_DISC:
|
||||
printf ("Empty slot.");
|
||||
break;
|
||||
case CDS_TRAY_OPEN:
|
||||
printf ("CD-ROM tray open.\n");
|
||||
break;
|
||||
case CDS_DRIVE_NOT_READY:
|
||||
printf ("CD-ROM drive not ready.\n");
|
||||
break;
|
||||
case CDS_NO_INFO:
|
||||
printf ("No Information available.");
|
||||
break;
|
||||
default:
|
||||
printf ("This Should not happen!\n");
|
||||
break;
|
||||
}
|
||||
if (slot == x_slot) {
|
||||
status = ioctl (fd, CDROM_DISC_STATUS);
|
||||
if (status<0) {
|
||||
perror(" CDROM_DISC_STATUS");
|
||||
}
|
||||
switch (status) {
|
||||
case CDS_AUDIO:
|
||||
printf ("\tAudio disc.\t");
|
||||
break;
|
||||
case CDS_DATA_1:
|
||||
case CDS_DATA_2:
|
||||
printf ("\tData disc type %d.\t", status-CDS_DATA_1+1);
|
||||
break;
|
||||
case CDS_XA_2_1:
|
||||
case CDS_XA_2_2:
|
||||
printf ("\tXA data disc type %d.\t", status-CDS_XA_2_1+1);
|
||||
break;
|
||||
default:
|
||||
printf ("\tUnknown disc type 0x%x!\t", status);
|
||||
break;
|
||||
}
|
||||
}
|
||||
status = ioctl (fd, CDROM_MEDIA_CHANGED, x_slot);
|
||||
if (status<0) {
|
||||
perror(" CDROM_MEDIA_CHANGED");
|
||||
}
|
||||
switch (status) {
|
||||
case 1:
|
||||
printf ("Changed.\n");
|
||||
break;
|
||||
default:
|
||||
printf ("\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* close device */
|
||||
status = close (fd);
|
||||
if (status != 0) {
|
||||
fprintf (stderr, "%s: close failed for `%s`: %s\n",
|
||||
program, device, strerror (errno));
|
||||
exit (1);
|
||||
}
|
||||
|
||||
exit (0);
|
||||
}
|
|
@ -8,7 +8,6 @@ cdrom
|
|||
:maxdepth: 1
|
||||
|
||||
cdrom-standard
|
||||
ide-cd
|
||||
packet-writing
|
||||
|
||||
.. only:: subproject and html
|
||||
|
|
Loading…
Reference in a new issue