[MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.

Added support for RM200C machines with big endian firmware
Added support for RM200-C40 (R5000 support)
    
Signed-off-by: Florian Lohoff <flo@rfc822.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Thomas Bogendoerfer 2006-06-13 13:59:01 +02:00 committed by Ralf Baechle
parent b00f473e1a
commit 4a0312fca6
7 changed files with 177 additions and 19 deletions

View File

@ -693,8 +693,8 @@ config SIBYTE_CRHONE
config SNI_RM200_PCI
bool "SNI RM200 PCI"
select ARC
select ARC32
select ARC if CPU_LITTLE_ENDIAN
select ARC32 if CPU_LITTLE_ENDIAN
select ARCH_MAY_HAVE_PC_FDC
select BOOT_ELF32
select DMA_NONCOHERENT
@ -705,10 +705,13 @@ config SNI_RM200_PCI
select I8253
select I8259
select ISA
select SWAP_IO_SPACE if CPU_BIG_ENDIAN
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000
select R5000_CPU_SCACHE
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
help

View File

@ -47,13 +47,13 @@ static int pcimt_read(struct pci_bus *bus, unsigned int devfn, int reg,
switch (size) {
case 1:
*val = *(volatile u8 *) (PCIMT_CONFIG_DATA + (reg & 3));
*val = inb(PCIMT_CONFIG_DATA + (reg & 3));
break;
case 2:
*val = *(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2));
*val = inw(PCIMT_CONFIG_DATA + (reg & 2));
break;
case 4:
*val = *(volatile u32 *) PCIMT_CONFIG_DATA;
*val = inl(PCIMT_CONFIG_DATA);
break;
}
@ -70,13 +70,13 @@ static int pcimt_write(struct pci_bus *bus, unsigned int devfn, int reg,
switch (size) {
case 1:
*(volatile u8 *) (PCIMT_CONFIG_DATA + (reg & 3)) = val;
outb (val, PCIMT_CONFIG_DATA + (reg & 3));
break;
case 2:
*(volatile u16 *) (PCIMT_CONFIG_DATA + (reg & 2)) = val;
outw (val, PCIMT_CONFIG_DATA + (reg & 2));
break;
case 4:
*(volatile u32 *) PCIMT_CONFIG_DATA = val;
outl (val, PCIMT_CONFIG_DATA);
break;
}

View File

@ -3,5 +3,6 @@
#
obj-y += irq.o pcimt_scache.o reset.o setup.o
obj-$(CONFIG_CPU_BIG_ENDIAN) += sniprom.o
EXTRA_AFLAGS := $(CFLAGS)

View File

@ -21,8 +21,11 @@
#include <linux/fb.h>
#include <linux/tty.h>
#ifdef CONFIG_ARC
#include <asm/arc/types.h>
#include <asm/sgialib.h>
#endif
#include <asm/bcache.h>
#include <asm/bootinfo.h>
#include <asm/io.h>
@ -72,8 +75,7 @@ static inline void sni_pcimt_detect(void)
static void __init sni_display_setup(void)
{
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_ARC)
struct screen_info *si = &screen_info;
DISPLAY_STATUS *di;
@ -88,7 +90,6 @@ static void __init sni_display_setup(void)
si->orig_video_points = 16;
}
#endif
#endif
}
static struct resource sni_io_resource = {

158
arch/mips/sni/sniprom.c Normal file
View File

@ -0,0 +1,158 @@
/*
* Big Endian PROM code for SNI RM machines
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2005-2006 Florian Lohoff (flo@rfc822.org)
* Copyright (C) 2005-2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
#include <asm/addrspace.h>
#include <asm/sni.h>
#include <asm/mipsprom.h>
#include <asm/bootinfo.h>
/* special SNI prom calls */
/*
* This does not exist in all proms - SINIX compares
* the prom env variable "version" against "2.0008"
* or greater. If lesser it tries to probe interesting
* registers
*/
#define PROM_GET_MEMCONF 58
#define PROM_VEC (u64 *)CKSEG1ADDR(0x1fc00000)
#define PROM_ENTRY(x) (PROM_VEC + (x))
#undef DEBUG
#ifdef DEBUG
#define DBG_PRINTF(x...) prom_printf(x)
#else
#define DBG_PRINTF(x...)
#endif
static int *(*__prom_putchar)(int) = (int *(*)(int))PROM_ENTRY(PROM_PUTCHAR);
static char *(*__prom_getenv)(char *) = (char *(*)(char *))PROM_ENTRY(PROM_GETENV);
static void (*__prom_get_memconf)(void *) = (void (*)(void *))PROM_ENTRY(PROM_GET_MEMCONF);
char *prom_getenv (char *s)
{
return __prom_getenv(s);
}
void prom_printf(char *fmt, ...)
{
va_list args;
char ppbuf[1024];
char *bptr;
va_start(args, fmt);
vsprintf(ppbuf, fmt, args);
bptr = ppbuf;
while (*bptr != 0) {
if (*bptr == '\n')
__prom_putchar('\r');
__prom_putchar(*bptr++);
}
va_end(args);
}
unsigned long prom_free_prom_memory(void)
{
return 0;
}
/*
* /proc/cpuinfo system type
*
*/
static const char *systype = "Unknown";
const char *get_system_type(void)
{
return systype;
}
#define SNI_IDPROM_BASE 0xbff00000
#define SNI_IDPROM_MEMSIZE (SNI_IDPROM_BASE+0x28) /* Memsize in 16MB quantities */
#define SNI_IDPROM_BRDTYPE (SNI_IDPROM_BASE+0x29) /* Board Type */
#define SNI_IDPROM_CPUTYPE (SNI_IDPROM_BASE+0x30) /* CPU Type */
#define SNI_IDPROM_SIZE 0x1000
#ifdef DEBUG
static void sni_idprom_dump(void)
{
int i;
prom_printf("SNI IDProm dump (first 128byte):\n");
for(i=0;i<128;i++) {
if (i%16 == 0)
prom_printf("%04x ", i);
prom_printf("%02x ", *(unsigned char *) (SNI_IDPROM_BASE+i));
if (i%16 == 15)
prom_printf("\n");
}
}
#endif
static void sni_mem_init(void )
{
int i, memsize;
struct membank {
u32 size;
u32 base;
u32 size2;
u32 pad1;
u32 pad2;
} memconf[8];
/* MemSIZE from prom in 16MByte chunks */
memsize=*((unsigned char *) SNI_IDPROM_MEMSIZE) * 16;
DBG_PRINTF("IDProm memsize: %lu MByte\n", memsize);
/* get memory bank layout from prom */
__prom_get_memconf(&memconf);
DBG_PRINTF("prom_get_mem_conf memory configuration:\n");
for(i=0;i<8 && memconf[i].size;i++) {
prom_printf("Bank%d: %08x @ %08x\n", i,
memconf[i].size, memconf[i].base);
add_memory_region(memconf[i].base, memconf[i].size, BOOT_MEM_RAM);
}
}
void __init prom_init(void)
{
int argc = fw_arg0;
char **argv = (void *)fw_arg1;
unsigned int sni_brd_type = *(unsigned char *) SNI_IDPROM_BRDTYPE;
int i;
DBG_PRINTF("Found SNI brdtype %02x\n", sni_brd_type);
#ifdef DEBUG
sni_idprom_dump();
#endif
sni_mem_init();
/* copy prom cmdline parameters to kernel cmdline */
for (i = 1; i < argc; i++) {
strcat(arcs_cmdline, argv[i]);
if (i < (argc - 1))
strcat(arcs_cmdline, " ");
}
}

View File

@ -35,10 +35,8 @@
#define cpu_has_nofpuex 0
#define cpu_has_64bits 1
#define cpu_has_subset_pcaches 0 /* No S-cache on R5000 I think ... */
#define cpu_dcache_line_size() 32
#define cpu_icache_line_size() 32
#define cpu_scache_line_size() 0 /* No S-cache on R5000 I think ... */
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0

View File

@ -15,9 +15,6 @@
/*
* ASIC PCI registers for little endian configuration.
*/
#ifndef __MIPSEL__
#error "Fix me for big endian"
#endif
#define PCIMT_UCONF 0xbfff0000
#define PCIMT_IOADTIMEOUT2 0xbfff0008
#define PCIMT_IOMEMCONF 0xbfff0010
@ -51,9 +48,9 @@
#define PCIMT_PCI_CONF 0xbfff0100
/*
* Data port for the PCI bus.
* Data port for the PCI bus in IO space
*/
#define PCIMT_CONFIG_DATA 0xb4000cfc
#define PCIMT_CONFIG_DATA 0x0cfc
/*
* Board specific registers