[media] rc: img-ir: add Sanyo decoder module

Add an img-ir module for decoding the Sanyo infrared protocol.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/rc/img-ir/Kconfig

@@ -52,3 +52,10 @@ config IR_IMG_SHARP
 	help
 	   Say Y here to enable support for the Sharp protocol in the ImgTec
 	   infrared decoder block.
+
+config IR_IMG_SANYO
+	bool "Sanyo protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the Sanyo protocol (used by Sanyo,
+	   Aiwa, Chinon remotes) in the ImgTec infrared decoder block.

drivers/media/rc/img-ir/Makefile

@@ -5,6 +5,7 @@ img-ir-$(CONFIG_IR_IMG_NEC)	+= img-ir-nec.o
 img-ir-$(CONFIG_IR_IMG_JVC)	+= img-ir-jvc.o
 img-ir-$(CONFIG_IR_IMG_SONY)	+= img-ir-sony.o
 img-ir-$(CONFIG_IR_IMG_SHARP)	+= img-ir-sharp.o
+img-ir-$(CONFIG_IR_IMG_SANYO)	+= img-ir-sanyo.o
 img-ir-objs			:= $(img-ir-y)
 
 obj-$(CONFIG_IR_IMG)		+= img-ir.o

drivers/media/rc/img-ir/img-ir-hw.c

@@ -24,6 +24,7 @@ extern struct img_ir_decoder img_ir_nec;
 extern struct img_ir_decoder img_ir_jvc;
 extern struct img_ir_decoder img_ir_sony;
 extern struct img_ir_decoder img_ir_sharp;
+extern struct img_ir_decoder img_ir_sanyo;
 
 static bool img_ir_decoders_preprocessed;
 static struct img_ir_decoder *img_ir_decoders[] = {
@@ -38,6 +39,9 @@ static struct img_ir_decoder *img_ir_decoders[] = {
 #endif
 #ifdef CONFIG_IR_IMG_SHARP
 	&img_ir_sharp,
+#endif
+#ifdef CONFIG_IR_IMG_SANYO
+	&img_ir_sanyo,
 #endif
 	NULL
 };

drivers/media/rc/img-ir/img-ir-sanyo.c

@@ -0,0 +1,122 @@
+/*
+ * ImgTec IR Decoder setup for Sanyo protocol.
+ *
+ * Copyright 2012-2014 Imagination Technologies Ltd.
+ *
+ * From ir-sanyo-decoder.c:
+ *
+ * This protocol uses the NEC protocol timings. However, data is formatted as:
+ *	13 bits Custom Code
+ *	13 bits NOT(Custom Code)
+ *	8 bits Key data
+ *	8 bits NOT(Key data)
+ *
+ * According with LIRC, this protocol is used on Sanyo, Aiwa and Chinon
+ * Information for this protocol is available at the Sanyo LC7461 datasheet.
+ */
+
+#include "img-ir-hw.h"
+
+/* Convert Sanyo data to a scancode */
+static int img_ir_sanyo_scancode(int len, u64 raw, int *scancode, u64 protocols)
+{
+	unsigned int addr, addr_inv, data, data_inv;
+	/* a repeat code has no data */
+	if (!len)
+		return IMG_IR_REPEATCODE;
+	if (len != 42)
+		return -EINVAL;
+	addr     = (raw >>  0) & 0x1fff;
+	addr_inv = (raw >> 13) & 0x1fff;
+	data     = (raw >> 26) & 0xff;
+	data_inv = (raw >> 34) & 0xff;
+	/* Validate data */
+	if ((data_inv ^ data) != 0xff)
+		return -EINVAL;
+	/* Validate address */
+	if ((addr_inv ^ addr) != 0x1fff)
+		return -EINVAL;
+
+	/* Normal Sanyo */
+	*scancode = addr << 8 | data;
+	return IMG_IR_SCANCODE;
+}
+
+/* Convert Sanyo scancode to Sanyo data filter */
+static int img_ir_sanyo_filter(const struct rc_scancode_filter *in,
+			       struct img_ir_filter *out, u64 protocols)
+{
+	unsigned int addr, addr_inv, data, data_inv;
+	unsigned int addr_m, data_m;
+
+	data = in->data & 0xff;
+	data_m = in->mask & 0xff;
+	data_inv = data ^ 0xff;
+
+	if (in->data & 0xff700000)
+		return -EINVAL;
+
+	addr       = (in->data >> 8) & 0x1fff;
+	addr_m     = (in->mask >> 8) & 0x1fff;
+	addr_inv   = addr ^ 0x1fff;
+
+	out->data = (u64)data_inv << 34 |
+		    (u64)data     << 26 |
+			 addr_inv << 13 |
+			 addr;
+	out->mask = (u64)data_m << 34 |
+		    (u64)data_m << 26 |
+			 addr_m << 13 |
+			 addr_m;
+	return 0;
+}
+
+/* Sanyo decoder */
+struct img_ir_decoder img_ir_sanyo = {
+	.type = RC_BIT_SANYO,
+	.control = {
+		.decoden = 1,
+		.code_type = IMG_IR_CODETYPE_PULSEDIST,
+	},
+	/* main timings */
+	.unit = 562500, /* 562.5 us */
+	.timings = {
+		/* leader symbol */
+		.ldr = {
+			.pulse = { 16	/* 9ms */ },
+			.space = { 8	/* 4.5ms */ },
+		},
+		/* 0 symbol */
+		.s00 = {
+			.pulse = { 1	/* 562.5 us */ },
+			.space = { 1	/* 562.5 us */ },
+		},
+		/* 1 symbol */
+		.s01 = {
+			.pulse = { 1	/* 562.5 us */ },
+			.space = { 3	/* 1687.5 us */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 42,
+			.maxlen = 42,
+			.ft_min = 10,	/* 5.625 ms */
+		},
+	},
+	/* repeat codes */
+	.repeat = 108,			/* 108 ms */
+	.rtimings = {
+		/* leader symbol */
+		.ldr = {
+			.space = { 4	/* 2.25 ms */ },
+		},
+		/* free time */
+		.ft = {
+			.minlen = 0,	/* repeat code has no data */
+			.maxlen = 0,
+		},
+	},
+	/* scancode logic */
+	.scancode = img_ir_sanyo_scancode,
+	.filter = img_ir_sanyo_filter,
+};