system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-11-05 18:23:50 +00:00
Code Issues Projects Releases Packages Wiki Activity

[PATCH] skge: make Genesis/Broadcom code work

Browse source 
Rewrite the code for handling the Broadcom PHY to something that
works. Remove link polling because Broadcom and Yukon don't need it.
When I wrote initial code, didn't have a genesis chipset based
board to test, so it was a non-working guess.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
This commit is contained in:
Stephen Hemminger 2005-06-27 11:33:12 -07:00 committed by Jeff Garzik
parent 31b619c5ab
commit 45bada65c2
2 changed files with 276 additions and 259 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

520
drivers/net/skge.c
View file

@ -54,7 +54,6 @@
#define TX_WATCHDOG (5 * HZ)
#define NAPI_WEIGHT 64
#define BLINK_HZ (HZ/4)
#define LINK_POLL_HZ (HZ/10)
MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@ -96,6 +95,7 @@ static void yukon_init(struct skge_hw *hw, int port);
static void yukon_reset(struct skge_hw *hw, int port);
static void genesis_mac_init(struct skge_hw *hw, int port);
static void genesis_reset(struct skge_hw *hw, int port);
static void genesis_link_up(struct skge_port *skge);
static const int txqaddr[] = { Q_XA1, Q_XA2 };
static const int rxqaddr[] = { Q_R1, Q_R2 };
@ -950,8 +950,7 @@ static void genesis_init(struct skge_hw *hw)
static void genesis_reset(struct skge_hw *hw, int port)
{
int i;
u64 zero = 0;
const u8 zero[8] = { 0 };
/* reset the statistics module */
xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT);
@ -963,20 +962,100 @@ static void genesis_reset(struct skge_hw *hw, int port)
/* disable Broadcom PHY IRQ */
xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff);
xm_outhash(hw, port, XM_HSM, (u8 *) &zero);
for (i = 0; i < 15; i++)
xm_outaddr(hw, port, XM_EXM(i), (u8 *) &zero);
xm_outhash(hw, port, XM_SRC_CHK, (u8 *) &zero);
xm_outhash(hw, port, XM_HSM, zero);
}
static void genesis_mac_init(struct skge_hw *hw, int port)
/* Convert mode to MII values */
static const u16 phy_pause_map[] = {
[FLOW_MODE_NONE] = 0,
[FLOW_MODE_LOC_SEND] = PHY_AN_PAUSE_ASYM,
[FLOW_MODE_SYMMETRIC] = PHY_AN_PAUSE_CAP,
[FLOW_MODE_REM_SEND] = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,
};
/* Check status of Broadcom phy link */
static void bcom_check_link(struct skge_hw *hw, int port)
{
struct skge_port *skge = netdev_priv(hw->dev[port]);
struct net_device *dev = hw->dev[port];
struct skge_port *skge = netdev_priv(dev);
u16 status;
/* read twice because of latch */
(void) xm_phy_read(hw, port, PHY_BCOM_STAT);
status = xm_phy_read(hw, port, PHY_BCOM_STAT);
pr_debug("bcom_check_link status=0x%x\n", status);
if ((status & PHY_ST_LSYNC) == 0) {
u16 cmd = xm_read16(hw, port, XM_MMU_CMD);
cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX);
xm_write16(hw, port, XM_MMU_CMD, cmd);
/* dummy read to ensure writing */
(void) xm_read16(hw, port, XM_MMU_CMD);
if (netif_carrier_ok(dev))
skge_link_down(skge);
} else {
if (skge->autoneg == AUTONEG_ENABLE &&
(status & PHY_ST_AN_OVER)) {
u16 lpa = xm_phy_read(hw, port, PHY_BCOM_AUNE_LP);
u16 aux = xm_phy_read(hw, port, PHY_BCOM_AUX_STAT);
if (lpa & PHY_B_AN_RF) {
printk(KERN_NOTICE PFX "%s: remote fault\n",
dev->name);
return;
}
/* Check Duplex mismatch */
switch(aux & PHY_B_AS_AN_RES_MSK) {
case PHY_B_RES_1000FD:
skge->duplex = DUPLEX_FULL;
break;
case PHY_B_RES_1000HD:
skge->duplex = DUPLEX_HALF;
break;
default:
printk(KERN_NOTICE PFX "%s: duplex mismatch\n",
dev->name);
return;
}
/* We are using IEEE 802.3z/D5.0 Table 37-4 */
switch (aux & PHY_B_AS_PAUSE_MSK) {
case PHY_B_AS_PAUSE_MSK:
skge->flow_control = FLOW_MODE_SYMMETRIC;
break;
case PHY_B_AS_PRR:
skge->flow_control = FLOW_MODE_REM_SEND;
break;
case PHY_B_AS_PRT:
skge->flow_control = FLOW_MODE_LOC_SEND;
break;
default:
skge->flow_control = FLOW_MODE_NONE;
}
skge->speed = SPEED_1000;
}
if (!netif_carrier_ok(dev))
genesis_link_up(skge);
}
}
/* Broadcom 5400 only supports giagabit! SysKonnect did not put an additional
* Phy on for 100 or 10Mbit operation
*/
static void bcom_phy_init(struct skge_port *skge, int jumbo)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
int i;
u32 r;
u16 id1;
u16 ctrl1, ctrl2, ctrl3, ctrl4, ctrl5;
u16 id1, r, ext, ctl;
/* magic workaround patterns for Broadcom */
static const struct {
@ -992,6 +1071,110 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
{ 0x17, 0x0013 }, { 0x15, 0x0A04 }, { 0x18, 0x0420 },
};
pr_debug("bcom_phy_init\n");
/* read Id from external PHY (all have the same address) */
id1 = xm_phy_read(hw, port, PHY_XMAC_ID1);
/* Optimize MDIO transfer by suppressing preamble. */
r = xm_read16(hw, port, XM_MMU_CMD);
r |= XM_MMU_NO_PRE;
xm_write16(hw, port, XM_MMU_CMD,r);
switch(id1) {
case PHY_BCOM_ID1_C0:
/*
* Workaround BCOM Errata for the C0 type.
* Write magic patterns to reserved registers.
*/
for (i = 0; i < ARRAY_SIZE(C0hack); i++)
xm_phy_write(hw, port,
C0hack[i].reg, C0hack[i].val);
break;
case PHY_BCOM_ID1_A1:
/*
* Workaround BCOM Errata for the A1 type.
* Write magic patterns to reserved registers.
*/
for (i = 0; i < ARRAY_SIZE(A1hack); i++)
xm_phy_write(hw, port,
A1hack[i].reg, A1hack[i].val);
break;
}
/*
* Workaround BCOM Errata (#10523) for all BCom PHYs.
* Disable Power Management after reset.
*/
r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
r |= PHY_B_AC_DIS_PM;
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r);
/* Dummy read */
xm_read16(hw, port, XM_ISRC);
ext = PHY_B_PEC_EN_LTR; /* enable tx led */
ctl = PHY_CT_SP1000; /* always 1000mbit */
if (skge->autoneg == AUTONEG_ENABLE) {
/*
* Workaround BCOM Errata #1 for the C5 type.
* 1000Base-T Link Acquisition Failure in Slave Mode
* Set Repeater/DTE bit 10 of the 1000Base-T Control Register
*/
u16 adv = PHY_B_1000C_RD;
if (skge->advertising & ADVERTISED_1000baseT_Half)
adv |= PHY_B_1000C_AHD;
if (skge->advertising & ADVERTISED_1000baseT_Full)
adv |= PHY_B_1000C_AFD;
xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, adv);
ctl |= PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
if (skge->duplex == DUPLEX_FULL)
ctl |= PHY_CT_DUP_MD;
/* Force to slave */
xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, PHY_B_1000C_MSE);
}
/* Set autonegotiation pause parameters */
xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV,
phy_pause_map[skge->flow_control] | PHY_AN_CSMA);
/* Handle Jumbo frames */
if (jumbo) {
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL,
PHY_B_AC_TX_TST | PHY_B_AC_LONG_PACK);
ext |= PHY_B_PEC_HIGH_LA;
}
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ext);
xm_phy_write(hw, port, PHY_BCOM_CTRL, ctl);
/* Use link status change interrrupt */
xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK);
bcom_check_link(hw, port);
}
static void genesis_mac_init(struct skge_hw *hw, int port)
{
struct net_device *dev = hw->dev[port];
struct skge_port *skge = netdev_priv(dev);
int jumbo = hw->dev[port]->mtu > ETH_DATA_LEN;
int i;
u32 r;
const u8 zero[6] = { 0 };
/* Clear MIB counters */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* initialize Rx, Tx and Link LED */
skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
@ -1009,9 +1192,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
* GMII mode.
*/
spin_lock_bh(&hw->phy_lock);
/* External Phy Handling */
/* Take PHY out of reset. */
/* Take external Phy out of reset */
r = skge_read32(hw, B2_GP_IO);
if (port == 0)
r |= GP_DIR_0|GP_IO_0;
@ -1020,57 +1201,47 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
skge_write32(hw, B2_GP_IO, r);
skge_read32(hw, B2_GP_IO);
spin_unlock_bh(&hw->phy_lock);
/* Enable GMII mode on the XMAC. */
/* Enable GMII interfac */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
id1 = xm_phy_read(hw, port, PHY_XMAC_ID1);
bcom_phy_init(skge, jumbo);
/* Optimize MDIO transfer by suppressing preamble. */
xm_write16(hw, port, XM_MMU_CMD,
xm_read16(hw, port, XM_MMU_CMD)
| XM_MMU_NO_PRE);
/* Set Station Address */
xm_outaddr(hw, port, XM_SA, dev->dev_addr);
if (id1 == PHY_BCOM_ID1_C0) {
/*
* Workaround BCOM Errata for the C0 type.
* Write magic patterns to reserved registers.
*/
for (i = 0; i < ARRAY_SIZE(C0hack); i++)
xm_phy_write(hw, port,
C0hack[i].reg, C0hack[i].val);
/* We don't use match addresses so clear */
for (i = 1; i < 16; i++)
xm_outaddr(hw, port, XM_EXM(i), zero);
} else if (id1 == PHY_BCOM_ID1_A1) {
/*
* Workaround BCOM Errata for the A1 type.
* Write magic patterns to reserved registers.
*/
for (i = 0; i < ARRAY_SIZE(A1hack); i++)
xm_phy_write(hw, port,
A1hack[i].reg, A1hack[i].val);
}
/*
* Workaround BCOM Errata (#10523) for all BCom PHYs.
* Disable Power Management after reset.
*/
r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL);
xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM);
/* Dummy read */
xm_read16(hw, port, XM_ISRC);
r = xm_read32(hw, port, XM_MODE);
xm_write32(hw, port, XM_MODE, r|XM_MD_CSA);
/* configure Rx High Water Mark (XM_RX_HI_WM) */
xm_write16(hw, port, XM_RX_HI_WM, 1450);
/* We don't need the FCS appended to the packet. */
r = xm_read16(hw, port, XM_RX_CMD);
xm_write16(hw, port, XM_RX_CMD, r | XM_RX_STRIP_FCS);
r = XM_RX_LENERR_OK | XM_RX_STRIP_FCS;
if (jumbo)
r |= XM_RX_BIG_PK_OK;
if (skge->duplex == DUPLEX_HALF) {
/*
* If in manual half duplex mode the other side might be in
* full duplex mode, so ignore if a carrier extension is not seen
* on frames received
*/
r |= XM_RX_DIS_CEXT;
}
xm_write16(hw, port, XM_RX_CMD, r);
/* We want short frames padded to 60 bytes. */
r = xm_read16(hw, port, XM_TX_CMD);
xm_write16(hw, port, XM_TX_CMD, r | XM_TX_AUTO_PAD);
xm_write16(hw, port, XM_TX_CMD, XM_TX_AUTO_PAD);
/*
* Bump up the transmit threshold. This helps hold off transmit
* underruns when we're blasting traffic from both ports at once.
*/
xm_write16(hw, port, XM_TX_THR, 512);
/*
* Enable the reception of all error frames. This is is
@ -1086,19 +1257,22 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
* case the XMAC will start transfering frames out of the
* RX FIFO as soon as the FIFO threshold is reached.
*/
r = xm_read32(hw, port, XM_MODE);
xm_write32(hw, port, XM_MODE,
XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT|
XM_MD_RX_ERR|XM_MD_RX_IRLE);
xm_write32(hw, port, XM_MODE, XM_DEF_MODE);
xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr);
xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr);
/*
* Bump up the transmit threshold. This helps hold off transmit
* underruns when we're blasting traffic from both ports at once.
* Initialize the Receive Counter Event Mask (XM_RX_EV_MSK)
* - Enable all bits excepting 'Octets Rx OK Low CntOv'
* and 'Octets Rx OK Hi Cnt Ov'.
*/
xm_write16(hw, port, XM_TX_THR, 512);
xm_write32(hw, port, XM_RX_EV_MSK, XMR_DEF_MSK);
/*
* Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK)
* - Enable all bits excepting 'Octets Tx OK Low CntOv'
* and 'Octets Tx OK Hi Cnt Ov'.
*/
xm_write32(hw, port, XM_TX_EV_MSK, XMT_DEF_MSK);
/* Configure MAC arbiter */
skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR);
@ -1124,89 +1298,14 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
if (hw->dev[port]->mtu > ETH_DATA_LEN) {
if (jumbo) {
/* Enable frame flushing if jumbo frames used */
skge_write16(hw, SK_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH);
} else {
/* enable timeout timers if normal frames */
skge_write16(hw, B3_PA_CTRL,
port == 0 ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2);
(port == 0) ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2);
}
r = xm_read16(hw, port, XM_RX_CMD);
if (hw->dev[port]->mtu > ETH_DATA_LEN)
xm_write16(hw, port, XM_RX_CMD, r | XM_RX_BIG_PK_OK);
else
xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK));
/* Broadcom phy initialization */
ctrl1 = PHY_CT_SP1000;
ctrl2 = 0;
ctrl3 = PHY_AN_CSMA;
ctrl4 = PHY_B_PEC_EN_LTR;
ctrl5 = PHY_B_AC_TX_TST;
if (skge->autoneg == AUTONEG_ENABLE) {
/*
* Workaround BCOM Errata #1 for the C5 type.
* 1000Base-T Link Acquisition Failure in Slave Mode
* Set Repeater/DTE bit 10 of the 1000Base-T Control Register
*/
ctrl2 |= PHY_B_1000C_RD;
if (skge->advertising & ADVERTISED_1000baseT_Half)
ctrl2 |= PHY_B_1000C_AHD;
if (skge->advertising & ADVERTISED_1000baseT_Full)
ctrl2 |= PHY_B_1000C_AFD;
/* Set Flow-control capabilities */
switch (skge->flow_control) {
case FLOW_MODE_NONE:
ctrl3 |= PHY_B_P_NO_PAUSE;
break;
case FLOW_MODE_LOC_SEND:
ctrl3 |= PHY_B_P_ASYM_MD;
break;
case FLOW_MODE_SYMMETRIC:
ctrl3 |= PHY_B_P_SYM_MD;
break;
case FLOW_MODE_REM_SEND:
ctrl3 |= PHY_B_P_BOTH_MD;
break;
}
/* Restart Auto-negotiation */
ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
if (skge->duplex == DUPLEX_FULL)
ctrl1 |= PHY_CT_DUP_MD;
ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */
}
xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2);
xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3);
if (skge->netdev->mtu > ETH_DATA_LEN) {
ctrl4 |= PHY_B_PEC_HIGH_LA;
ctrl5 |= PHY_B_AC_LONG_PACK;
xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5);
}
xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4);
xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1);
spin_unlock_bh(&hw->phy_lock);
/* Clear MIB counters */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Clear two times according to Errata #3 */
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
/* Start polling for link status */
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
}
static void genesis_stop(struct skge_port *skge)
@ -1331,23 +1430,6 @@ static u16 gm_phy_read(struct skge_hw *hw, int port, u16 reg)
return gma_read16(hw, port, GM_SMI_DATA);
}
static void genesis_link_down(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
pr_debug("genesis_link_down\n");
xm_write16(hw, port, XM_MMU_CMD,
xm_read16(hw, port, XM_MMU_CMD)
& ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX));
/* dummy read to ensure writing */
(void) xm_read16(hw, port, XM_MMU_CMD);
skge_link_down(skge);
}
static void genesis_link_up(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
@ -1430,18 +1512,23 @@ static void genesis_link_up(struct skge_port *skge)
}
static void genesis_bcom_intr(struct skge_port *skge)
static inline void bcom_phy_intr(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
u16 stat = xm_phy_read(hw, port, PHY_BCOM_INT_STAT);
u16 isrc;
pr_debug("genesis_bcom intr stat=%x\n", stat);
isrc = xm_phy_read(hw, port, PHY_BCOM_INT_STAT);
pr_debug("bcom_phy_interrupt status=0x%x\n", isrc);
if (isrc & PHY_B_IS_PSE)
printk(KERN_ERR PFX "%s: uncorrectable pair swap error\n",
hw->dev[port]->name);
/* Workaround BCom Errata:
* enable and disable loopback mode if "NO HCD" occurs.
*/
if (stat & PHY_B_IS_NO_HDCL) {
if (isrc & PHY_B_IS_NO_HDCL) {
u16 ctrl = xm_phy_read(hw, port, PHY_BCOM_CTRL);
xm_phy_write(hw, port, PHY_BCOM_CTRL,
ctrl | PHY_CT_LOOP);
@ -1449,57 +1536,9 @@ static void genesis_bcom_intr(struct skge_port *skge)
ctrl & ~PHY_CT_LOOP);
}
stat = xm_phy_read(hw, port, PHY_BCOM_STAT);
if (stat & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) {
u16 aux = xm_phy_read(hw, port, PHY_BCOM_AUX_STAT);
if ( !(aux & PHY_B_AS_LS) && netif_carrier_ok(skge->netdev))
genesis_link_down(skge);
if (isrc & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
bcom_check_link(hw, port);
else if (stat & PHY_B_IS_LST_CHANGE) {
if (aux & PHY_B_AS_AN_C) {
switch (aux & PHY_B_AS_AN_RES_MSK) {
case PHY_B_RES_1000FD:
skge->duplex = DUPLEX_FULL;
break;
case PHY_B_RES_1000HD:
skge->duplex = DUPLEX_HALF;
break;
}
switch (aux & PHY_B_AS_PAUSE_MSK) {
case PHY_B_AS_PAUSE_MSK:
skge->flow_control = FLOW_MODE_SYMMETRIC;
break;
case PHY_B_AS_PRR:
skge->flow_control = FLOW_MODE_REM_SEND;
break;
case PHY_B_AS_PRT:
skge->flow_control = FLOW_MODE_LOC_SEND;
break;
default:
skge->flow_control = FLOW_MODE_NONE;
}
skge->speed = SPEED_1000;
}
genesis_link_up(skge);
}
else
mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ);
}
}
/* Perodic poll of phy status to check for link transistion */
static void skge_link_timer(unsigned long __arg)
{
struct skge_port *skge = (struct skge_port *) __arg;
struct skge_hw *hw = skge->hw;
if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev))
return;
spin_lock_bh(&hw->phy_lock);
genesis_bcom_intr(skge);
spin_unlock_bh(&hw->phy_lock);
}
/* Marvell Phy Initailization */
@ -1547,41 +1586,12 @@ static void yukon_init(struct skge_hw *hw, int port)
adv |= PHY_M_AN_10_FD;
if (skge->advertising & ADVERTISED_10baseT_Half)
adv |= PHY_M_AN_10_HD;
/* Set Flow-control capabilities */
switch (skge->flow_control) {
case FLOW_MODE_NONE:
adv |= PHY_B_P_NO_PAUSE;
break;
case FLOW_MODE_LOC_SEND:
adv |= PHY_B_P_ASYM_MD;
break;
case FLOW_MODE_SYMMETRIC:
adv |= PHY_B_P_SYM_MD;
break;
case FLOW_MODE_REM_SEND:
adv |= PHY_B_P_BOTH_MD;
break;
}
} else { /* special defines for FIBER (88E1011S only) */
} else /* special defines for FIBER (88E1011S only) */
adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD;
/* Set Flow-control capabilities */
switch (skge->flow_control) {
case FLOW_MODE_NONE:
adv |= PHY_M_P_NO_PAUSE_X;
break;
case FLOW_MODE_LOC_SEND:
adv |= PHY_M_P_ASYM_MD_X;
break;
case FLOW_MODE_SYMMETRIC:
adv |= PHY_M_P_SYM_MD_X;
break;
case FLOW_MODE_REM_SEND:
adv |= PHY_M_P_BOTH_MD_X;
break;
}
}
/* Set Flow-control capabilities */
adv |= phy_pause_map[skge->flow_control];
/* Restart Auto-negotiation */
ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG;
} else {
@ -2090,7 +2100,6 @@ static int skge_down(struct net_device *dev)
netif_stop_queue(dev);
del_timer_sync(&skge->led_blink);
del_timer_sync(&skge->link_check);
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
@ -2325,6 +2334,8 @@ static void genesis_set_multicast(struct net_device *dev)
u32 mode;
u8 filter[8];
pr_debug("genesis_set_multicast flags=%x count=%d\n", dev->flags, dev->mc_count);
mode = xm_read32(hw, port, XM_MODE);
mode |= XM_MD_ENA_HASH;
if (dev->flags & IFF_PROMISC)
@ -2337,16 +2348,15 @@ static void genesis_set_multicast(struct net_device *dev)
else {
memset(filter, 0, sizeof(filter));
for (i = 0; list && i < count; i++, list = list->next) {
u32 crc = crc32_le(~0, list->dmi_addr, ETH_ALEN);
u8 bit = 63 - (crc & 63);
u32 crc, bit;
crc = ether_crc_le(ETH_ALEN, list->dmi_addr);
bit = ~crc & 0x3f;
filter[bit/8] |= 1 << (bit%8);
}
}
xm_outhash(hw, port, XM_HSM, filter);
xm_write32(hw, port, XM_MODE, mode);
xm_outhash(hw, port, XM_HSM, filter);
}
static void yukon_set_multicast(struct net_device *dev)
@ -2667,7 +2677,7 @@ static void skge_extirq(unsigned long data)
if (hw->chip_id != CHIP_ID_GENESIS)
yukon_phy_intr(skge);
else
genesis_bcom_intr(skge);
bcom_phy_intr(skge);
}
}
spin_unlock(&hw->phy_lock);
@ -2986,10 +2996,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
spin_lock_init(&skge->tx_lock);
init_timer(&skge->link_check);
skge->link_check.function = skge_link_timer;
skge->link_check.data = (unsigned long) skge;
init_timer(&skge->led_blink);
skge->led_blink.function = skge_blink_timer;
skge->led_blink.data = (unsigned long) skge;

15
drivers/net/skge.h
View file

@ -1225,6 +1225,16 @@ enum {
PHY_B_PES_MLT3_ER = 1<<0, /* Bit 0: MLT3 code Error */
};
/* PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/
/* PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/
enum {
PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */
PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */
PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */
};
/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/
enum {
PHY_B_FC_CTR = 0xff, /* Bit 7..0: False Carrier Counter */
@ -1285,7 +1295,9 @@ enum {
PHY_B_IS_LST_CHANGE = 1<<1, /* Bit 1: Link Status Changed */
PHY_B_IS_CRC_ER = 1<<0, /* Bit 0: CRC Error */
};
#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE))
#define PHY_B_DEF_MSK \
(~(PHY_B_IS_PSE | PHY_B_IS_AN_PR | PHY_B_IS_DUP_CHANGE | \
PHY_B_IS_LSP_CHANGE | PHY_B_IS_LST_CHANGE))
/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */
enum {
@ -2489,7 +2501,6 @@ struct skge_port {
dma_addr_t dma;
unsigned long mem_size;
struct timer_list link_check;
struct timer_list led_blink;
};