Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  power_supply: Add driver for the PMU on WM831x PMICs
  ds2760_battery: Fix integer overflow for time_to_empty_now
  wm97xx_battery: Convert to dev_pm_ops
  wm97xx_battery: Use irq to detect charger state
  wm97xx_battery: Use platform_data
  wm97xx-core: Pass platform_data to battery
  ds2760_battery: implement set_charged() feature
  power_supply: get_by_name and set_charged functionality
  power_supply: EXPORT_SYMBOL cleanups
  ds2760_battery: add current_accum module parameter
  ds2760_battery: handle full_active_uAh == 0 case correctly
  ds2760_battery: add rated_capacity module parameter
  ds2760_battery: export more features
  ds2760_battery: delay power supply registration
  wm8350_power: Implement charge type property
  power_supply: Add a charge_type property, and use it for olpc driver
  olpc_battery: Add an 'error' sysfs device that displays raw errors
  Revert "power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL"
This commit is contained in:
Linus Torvalds 2009-09-23 10:11:08 -07:00
commit 433c24ed7f
15 changed files with 1331 additions and 66 deletions

View file

@ -76,6 +76,11 @@ STATUS - this attribute represents operating status (charging, full,
discharging (i.e. powering a load), etc.). This corresponds to
BATTERY_STATUS_* values, as defined in battery.h.
CHARGE_TYPE - batteries can typically charge at different rates.
This defines trickle and fast charges. For batteries that
are already charged or discharging, 'n/a' can be displayed (or
'unknown', if the status is not known).
HEALTH - represents health of the battery, values corresponds to
POWER_SUPPLY_HEALTH_*, defined in battery.h.
@ -108,6 +113,8 @@ relative, time-based measurements.
ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
CAPACITY - capacity in percents.
CAPACITY_LEVEL - capacity level. This corresponds to
POWER_SUPPLY_CAPACITY_LEVEL_*.
TEMP - temperature of the power supply.
TEMP_AMBIENT - ambient temperature.

View file

@ -561,6 +561,7 @@ static void wm97xx_ts_input_close(struct input_dev *idev)
static int wm97xx_probe(struct device *dev)
{
struct wm97xx *wm;
struct wm97xx_pdata *pdata = dev->platform_data;
int ret = 0, id = 0;
wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
@ -658,6 +659,7 @@ static int wm97xx_probe(struct device *dev)
}
platform_set_drvdata(wm->battery_dev, wm);
wm->battery_dev->dev.parent = dev;
wm->battery_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->battery_dev);
if (ret < 0)
goto batt_reg_err;
@ -671,6 +673,7 @@ static int wm97xx_probe(struct device *dev)
}
platform_set_drvdata(wm->touch_dev, wm);
wm->touch_dev->dev.parent = dev;
wm->touch_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->touch_dev);
if (ret < 0)
goto touch_reg_err;

View file

@ -29,6 +29,13 @@ config APM_POWER
Say Y here to enable support APM status emulation using
battery class devices.
config WM831X_POWER
tristate "WM831X PMU support"
depends on MFD_WM831X
help
Say Y here to enable support for the power management unit
provided by Wolfson Microelectronics WM831x PMICs.
config WM8350_POWER
tristate "WM8350 PMU support"
depends on MFD_WM8350

View file

@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
obj-$(CONFIG_PDA_POWER) += pda_power.o
obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o

View file

@ -56,6 +56,7 @@ struct ds2760_device_info {
struct device *w1_dev;
struct workqueue_struct *monitor_wqueue;
struct delayed_work monitor_work;
struct delayed_work set_charged_work;
};
static unsigned int cache_time = 1000;
@ -66,6 +67,14 @@ static unsigned int pmod_enabled;
module_param(pmod_enabled, bool, 0644);
MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
static unsigned int rated_capacity;
module_param(rated_capacity, uint, 0644);
MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
static unsigned int current_accum;
module_param(current_accum, uint, 0644);
MODULE_PARM_DESC(current_accum, "current accumulator value");
/* Some batteries have their rated capacity stored a N * 10 mAh, while
* others use an index into this table. */
static int rated_capacities[] = {
@ -168,8 +177,13 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
di->raw[DS2760_ACTIVE_FULL + 1];
scale[0] = di->raw[DS2760_ACTIVE_FULL] << 8 |
di->raw[DS2760_ACTIVE_FULL + 1];
/* If the full_active_uAh value is not given, fall back to the rated
* capacity. This is likely to happen when chips are not part of the
* battery pack and is therefore not bootstrapped. */
if (di->full_active_uAh == 0)
di->full_active_uAh = di->rated_capacity / 1000L;
scale[0] = di->full_active_uAh;
for (i = 1; i < 5; i++)
scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i];
@ -197,15 +211,31 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
if (di->rem_capacity > 100)
di->rem_capacity = 100;
if (di->current_uA)
di->life_sec = -((di->accum_current_uAh - di->empty_uAh) *
3600L) / di->current_uA;
if (di->current_uA >= 100L)
di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
/ (di->current_uA / 100L);
else
di->life_sec = 0;
return 0;
}
static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
unsigned int acr_val)
{
unsigned char acr[2];
/* acr is in units of 0.25 mAh */
acr_val *= 4L;
acr_val /= 1000;
acr[0] = acr_val >> 8;
acr[1] = acr_val & 0xff;
if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
dev_warn(di->dev, "ACR write failed\n");
}
static void ds2760_battery_update_status(struct ds2760_device_info *di)
{
int old_charge_status = di->charge_status;
@ -237,21 +267,9 @@ static void ds2760_battery_update_status(struct ds2760_device_info *di)
if (di->full_counter < 2) {
di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
} else {
unsigned char acr[2];
int acr_val;
/* acr is in units of 0.25 mAh */
acr_val = di->full_active_uAh * 4L / 1000;
acr[0] = acr_val >> 8;
acr[1] = acr_val & 0xff;
if (w1_ds2760_write(di->w1_dev, acr,
DS2760_CURRENT_ACCUM_MSB, 2) < 2)
dev_warn(di->dev,
"ACR reset failed\n");
di->charge_status = POWER_SUPPLY_STATUS_FULL;
ds2760_battery_set_current_accum(di,
di->full_active_uAh);
}
}
} else {
@ -274,6 +292,17 @@ static void ds2760_battery_write_status(struct ds2760_device_info *di,
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
}
static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
unsigned char rated_capacity)
{
if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
return;
w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
}
static void ds2760_battery_work(struct work_struct *work)
{
struct ds2760_device_info *di = container_of(work,
@ -299,6 +328,52 @@ static void ds2760_battery_external_power_changed(struct power_supply *psy)
queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
}
static void ds2760_battery_set_charged_work(struct work_struct *work)
{
char bias;
struct ds2760_device_info *di = container_of(work,
struct ds2760_device_info, set_charged_work.work);
dev_dbg(di->dev, "%s\n", __func__);
ds2760_battery_read_status(di);
/* When we get notified by external circuitry that the battery is
* considered fully charged now, we know that there is no current
* flow any more. However, the ds2760's internal current meter is
* too inaccurate to rely on - spec say something ~15% failure.
* Hence, we use the current offset bias register to compensate
* that error.
*/
if (!power_supply_am_i_supplied(&di->bat))
return;
bias = (signed char) di->current_raw +
(signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS];
dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
* value won't be read back by ds2760_battery_read_status() */
di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias;
}
static void ds2760_battery_set_charged(struct power_supply *psy)
{
struct ds2760_device_info *di = to_ds2760_device_info(psy);
/* postpone the actual work by 20 secs. This is for debouncing GPIO
* signals and to let the current value settle. See AN4188. */
cancel_delayed_work(&di->set_charged_work);
queue_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20);
}
static int ds2760_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@ -337,6 +412,12 @@ static int ds2760_battery_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_TEMP:
val->intval = di->temp_C;
break;
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
val->intval = di->life_sec;
break;
case POWER_SUPPLY_PROP_CAPACITY:
val->intval = di->rem_capacity;
break;
default:
return -EINVAL;
}
@ -353,6 +434,8 @@ static enum power_supply_property ds2760_battery_props[] = {
POWER_SUPPLY_PROP_CHARGE_EMPTY,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
POWER_SUPPLY_PROP_CAPACITY,
};
static int ds2760_battery_probe(struct platform_device *pdev)
@ -376,17 +459,12 @@ static int ds2760_battery_probe(struct platform_device *pdev)
di->bat.properties = ds2760_battery_props;
di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props);
di->bat.get_property = ds2760_battery_get_property;
di->bat.set_charged = ds2760_battery_set_charged;
di->bat.external_power_changed =
ds2760_battery_external_power_changed;
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
retval = power_supply_register(&pdev->dev, &di->bat);
if (retval) {
dev_err(di->dev, "failed to register battery\n");
goto batt_failed;
}
/* enable sleep mode feature */
ds2760_battery_read_status(di);
status = di->raw[DS2760_STATUS_REG];
@ -397,7 +475,24 @@ static int ds2760_battery_probe(struct platform_device *pdev)
ds2760_battery_write_status(di, status);
/* set rated capacity from module param */
if (rated_capacity)
ds2760_battery_write_rated_capacity(di, rated_capacity);
/* set current accumulator if given as parameter.
* this should only be done for bootstrapping the value */
if (current_accum)
ds2760_battery_set_current_accum(di, current_accum);
retval = power_supply_register(&pdev->dev, &di->bat);
if (retval) {
dev_err(di->dev, "failed to register battery\n");
goto batt_failed;
}
INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
INIT_DELAYED_WORK(&di->set_charged_work,
ds2760_battery_set_charged_work);
di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev));
if (!di->monitor_wqueue) {
retval = -ESRCH;
@ -422,6 +517,8 @@ static int ds2760_battery_remove(struct platform_device *pdev)
cancel_rearming_delayed_workqueue(di->monitor_wqueue,
&di->monitor_work);
cancel_rearming_delayed_workqueue(di->monitor_wqueue,
&di->set_charged_work);
destroy_workqueue(di->monitor_wqueue);
power_supply_unregister(&di->bat);

View file

@ -10,7 +10,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/err.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/jiffies.h>
@ -231,6 +233,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
if (ret)
return ret;
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
if (ec_byte & BAT_STAT_TRICKLE)
val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
else if (ec_byte & BAT_STAT_CHARGING)
val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
else
val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
BAT_STAT_TRICKLE));
@ -276,6 +286,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
return ret;
val->intval = ec_byte;
break;
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
if (ec_byte & BAT_STAT_FULL)
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
else if (ec_byte & BAT_STAT_LOW)
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
else
val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
break;
case POWER_SUPPLY_PROP_TEMP:
ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
if (ret)
@ -315,12 +333,14 @@ static int olpc_bat_get_property(struct power_supply *psy,
static enum power_supply_property olpc_bat_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_AVG,
POWER_SUPPLY_PROP_CURRENT_AVG,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
@ -370,6 +390,29 @@ static struct bin_attribute olpc_bat_eeprom = {
.read = olpc_bat_eeprom_read,
};
/* Allow userspace to see the specific error value pulled from the EC */
static ssize_t olpc_bat_error_read(struct device *dev,
struct device_attribute *attr, char *buf)
{
uint8_t ec_byte;
ssize_t ret;
ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", ec_byte);
}
static struct device_attribute olpc_bat_error = {
.attr = {
.name = "error",
.mode = S_IRUGO,
},
.show = olpc_bat_error_read,
};
/*********************************************************************
* Initialisation
*********************************************************************/
@ -433,8 +476,14 @@ static int __init olpc_bat_init(void)
if (ret)
goto eeprom_failed;
ret = device_create_file(olpc_bat.dev, &olpc_bat_error);
if (ret)
goto error_failed;
goto success;
error_failed:
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
eeprom_failed:
power_supply_unregister(&olpc_bat);
battery_failed:
@ -447,6 +496,7 @@ static int __init olpc_bat_init(void)
static void __exit olpc_bat_exit(void)
{
device_remove_file(olpc_bat.dev, &olpc_bat_error);
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);

View file

@ -18,7 +18,9 @@
#include <linux/power_supply.h>
#include "power_supply.h"
/* exported for the APM Power driver, APM emulation */
struct class *power_supply_class;
EXPORT_SYMBOL_GPL(power_supply_class);
static int __power_supply_changed_work(struct device *dev, void *data)
{
@ -55,6 +57,7 @@ void power_supply_changed(struct power_supply *psy)
schedule_work(&psy->changed_work);
}
EXPORT_SYMBOL_GPL(power_supply_changed);
static int __power_supply_am_i_supplied(struct device *dev, void *data)
{
@ -86,6 +89,7 @@ int power_supply_am_i_supplied(struct power_supply *psy)
return error;
}
EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
static int __power_supply_is_system_supplied(struct device *dev, void *data)
{
@ -110,6 +114,35 @@ int power_supply_is_system_supplied(void)
return error;
}
EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
int power_supply_set_battery_charged(struct power_supply *psy)
{
if (psy->type == POWER_SUPPLY_TYPE_BATTERY && psy->set_charged) {
psy->set_charged(psy);
return 0;
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(power_supply_set_battery_charged);
static int power_supply_match_device_by_name(struct device *dev, void *data)
{
const char *name = data;
struct power_supply *psy = dev_get_drvdata(dev);
return strcmp(psy->name, name) == 0;
}
struct power_supply *power_supply_get_by_name(char *name)
{
struct device *dev = class_find_device(power_supply_class, NULL, name,
power_supply_match_device_by_name);
return dev ? dev_get_drvdata(dev) : NULL;
}
EXPORT_SYMBOL_GPL(power_supply_get_by_name);
int power_supply_register(struct device *parent, struct power_supply *psy)
{
@ -144,6 +177,7 @@ int power_supply_register(struct device *parent, struct power_supply *psy)
success:
return rc;
}
EXPORT_SYMBOL_GPL(power_supply_register);
void power_supply_unregister(struct power_supply *psy)
{
@ -152,6 +186,7 @@ void power_supply_unregister(struct power_supply *psy)
power_supply_remove_attrs(psy);
device_unregister(psy->dev);
}
EXPORT_SYMBOL_GPL(power_supply_unregister);
static int __init power_supply_class_init(void)
{
@ -170,15 +205,6 @@ static void __exit power_supply_class_exit(void)
class_destroy(power_supply_class);
}
EXPORT_SYMBOL_GPL(power_supply_changed);
EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
EXPORT_SYMBOL_GPL(power_supply_register);
EXPORT_SYMBOL_GPL(power_supply_unregister);
/* exported for the APM Power driver, APM emulation */
EXPORT_SYMBOL_GPL(power_supply_class);
subsys_initcall(power_supply_class_init);
module_exit(power_supply_class_exit);

View file

@ -43,6 +43,9 @@ static ssize_t power_supply_show_property(struct device *dev,
static char *status_text[] = {
"Unknown", "Charging", "Discharging", "Not charging", "Full"
};
static char *charge_type[] = {
"Unknown", "N/A", "Trickle", "Fast"
};
static char *health_text[] = {
"Unknown", "Good", "Overheat", "Dead", "Over voltage",
"Unspecified failure", "Cold",
@ -51,6 +54,9 @@ static ssize_t power_supply_show_property(struct device *dev,
"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
"LiMn"
};
static char *capacity_level_text[] = {
"Unknown", "Critical", "Low", "Normal", "High", "Full"
};
ssize_t ret;
struct power_supply *psy = dev_get_drvdata(dev);
const ptrdiff_t off = attr - power_supply_attrs;
@ -67,10 +73,14 @@ static ssize_t power_supply_show_property(struct device *dev,
if (off == POWER_SUPPLY_PROP_STATUS)
return sprintf(buf, "%s\n", status_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE)
return sprintf(buf, "%s\n", charge_type[value.intval]);
else if (off == POWER_SUPPLY_PROP_HEALTH)
return sprintf(buf, "%s\n", health_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_TECHNOLOGY)
return sprintf(buf, "%s\n", technology_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
return sprintf(buf, "%s\n", capacity_level_text[value.intval]);
else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
return sprintf(buf, "%s\n", value.strval);
@ -81,6 +91,7 @@ static ssize_t power_supply_show_property(struct device *dev,
static struct device_attribute power_supply_attrs[] = {
/* Properties of type `int' */
POWER_SUPPLY_ATTR(status),
POWER_SUPPLY_ATTR(charge_type),
POWER_SUPPLY_ATTR(health),
POWER_SUPPLY_ATTR(present),
POWER_SUPPLY_ATTR(online),
@ -109,6 +120,7 @@ static struct device_attribute power_supply_attrs[] = {
POWER_SUPPLY_ATTR(energy_now),
POWER_SUPPLY_ATTR(energy_avg),
POWER_SUPPLY_ATTR(capacity),
POWER_SUPPLY_ATTR(capacity_level),
POWER_SUPPLY_ATTR(temp),
POWER_SUPPLY_ATTR(temp_ambient),
POWER_SUPPLY_ATTR(time_to_empty_now),

View file

@ -0,0 +1,779 @@
/*
* PMU driver for Wolfson Microelectronics wm831x PMICs
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/auxadc.h>
#include <linux/mfd/wm831x/pmu.h>
#include <linux/mfd/wm831x/pdata.h>
struct wm831x_power {
struct wm831x *wm831x;
struct power_supply wall;
struct power_supply backup;
struct power_supply usb;
struct power_supply battery;
};
static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
union power_supply_propval *val)
{
int ret;
ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
if (ret < 0)
return ret;
if (ret & supply)
val->intval = 1;
else
val->intval = 0;
return 0;
}
static int wm831x_power_read_voltage(struct wm831x *wm831x,
enum wm831x_auxadc src,
union power_supply_propval *val)
{
int ret;
ret = wm831x_auxadc_read_uv(wm831x, src);
if (ret >= 0)
val->intval = ret;
return ret;
}
/*********************************************************************
* WALL Power
*********************************************************************/
static int wm831x_wall_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
struct wm831x *wm831x = wm831x_power->wm831x;
int ret = 0;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val);
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static enum power_supply_property wm831x_wall_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
};
/*********************************************************************
* USB Power
*********************************************************************/
static int wm831x_usb_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
struct wm831x *wm831x = wm831x_power->wm831x;
int ret = 0;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val);
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static enum power_supply_property wm831x_usb_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
};
/*********************************************************************
* Battery properties
*********************************************************************/
struct chg_map {
int val;
int reg_val;
};
static struct chg_map trickle_ilims[] = {
{ 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT },
{ 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT },
{ 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT },
{ 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT },
};
static struct chg_map vsels[] = {
{ 4050, 0 << WM831X_CHG_VSEL_SHIFT },
{ 4100, 1 << WM831X_CHG_VSEL_SHIFT },
{ 4150, 2 << WM831X_CHG_VSEL_SHIFT },
{ 4200, 3 << WM831X_CHG_VSEL_SHIFT },
};
static struct chg_map fast_ilims[] = {
{ 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT },
{ 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT },
};
static struct chg_map eoc_iterms[] = {
{ 20, 0 << WM831X_CHG_ITERM_SHIFT },
{ 30, 1 << WM831X_CHG_ITERM_SHIFT },
{ 40, 2 << WM831X_CHG_ITERM_SHIFT },
{ 50, 3 << WM831X_CHG_ITERM_SHIFT },
{ 60, 4 << WM831X_CHG_ITERM_SHIFT },
{ 70, 5 << WM831X_CHG_ITERM_SHIFT },
{ 80, 6 << WM831X_CHG_ITERM_SHIFT },
{ 90, 7 << WM831X_CHG_ITERM_SHIFT },
};
static struct chg_map chg_times[] = {
{ 60, 0 << WM831X_CHG_TIME_SHIFT },
{ 90, 1 << WM831X_CHG_TIME_SHIFT },
{ 120, 2 << WM831X_CHG_TIME_SHIFT },
{ 150, 3 << WM831X_CHG_TIME_SHIFT },
{ 180, 4 << WM831X_CHG_TIME_SHIFT },
{ 210, 5 << WM831X_CHG_TIME_SHIFT },
{ 240, 6 << WM831X_CHG_TIME_SHIFT },
{ 270, 7 << WM831X_CHG_TIME_SHIFT },
{ 300, 8 << WM831X_CHG_TIME_SHIFT },
{ 330, 9 << WM831X_CHG_TIME_SHIFT },
{ 360, 10 << WM831X_CHG_TIME_SHIFT },
{ 390, 11 << WM831X_CHG_TIME_SHIFT },
{ 420, 12 << WM831X_CHG_TIME_SHIFT },
{ 450, 13 << WM831X_CHG_TIME_SHIFT },
{ 480, 14 << WM831X_CHG_TIME_SHIFT },
{ 510, 15 << WM831X_CHG_TIME_SHIFT },
};
static void wm831x_battey_apply_config(struct wm831x *wm831x,
struct chg_map *map, int count, int val,
int *reg, const char *name,
const char *units)
{
int i;
for (i = 0; i < count; i++)
if (val == map[i].val)
break;
if (i == count) {
dev_err(wm831x->dev, "Invalid %s %d%s\n",
name, val, units);
} else {
*reg |= map[i].reg_val;
dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units);
}
}
static void wm831x_config_battery(struct wm831x *wm831x)
{
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
struct wm831x_battery_pdata *pdata;
int ret, reg1, reg2;
if (!wm831x_pdata || !wm831x_pdata->battery) {
dev_warn(wm831x->dev,
"No battery charger configuration\n");
return;
}
pdata = wm831x_pdata->battery;
reg1 = 0;
reg2 = 0;
if (!pdata->enable) {
dev_info(wm831x->dev, "Battery charger disabled\n");
return;
}
reg1 |= WM831X_CHG_ENA;
if (pdata->off_mask)
reg2 |= WM831X_CHG_OFF_MSK;
if (pdata->fast_enable)
reg1 |= WM831X_CHG_FAST;
wm831x_battey_apply_config(wm831x, trickle_ilims,
ARRAY_SIZE(trickle_ilims),
pdata->trickle_ilim, &reg2,
"trickle charge current limit", "mA");
wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels),
pdata->vsel, &reg2,
"target voltage", "mV");
wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims),
pdata->fast_ilim, &reg2,
"fast charge current limit", "mA");
wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms),
pdata->eoc_iterm, &reg1,
"end of charge current threshold", "mA");
wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times),
pdata->timeout, &reg2,
"charger timeout", "min");
ret = wm831x_reg_unlock(wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
return;
}
ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
WM831X_CHG_ENA_MASK |
WM831X_CHG_FAST_MASK |
WM831X_CHG_ITERM_MASK |
WM831X_CHG_ITERM_MASK,
reg1);
if (ret != 0)
dev_err(wm831x->dev, "Failed to set charger control 1: %d\n",
ret);
ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2,
WM831X_CHG_OFF_MSK |
WM831X_CHG_TIME_MASK |
WM831X_CHG_FAST_ILIM_MASK |
WM831X_CHG_TRKL_ILIM_MASK |
WM831X_CHG_VSEL_MASK,
reg2);
if (ret != 0)
dev_err(wm831x->dev, "Failed to set charger control 2: %d\n",
ret);
wm831x_reg_lock(wm831x);
}
static int wm831x_bat_check_status(struct wm831x *wm831x, int *status)
{
int ret;
ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
if (ret < 0)
return ret;
if (ret & WM831X_PWR_SRC_BATT) {
*status = POWER_SUPPLY_STATUS_DISCHARGING;
return 0;
}
ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
if (ret < 0)
return ret;
switch (ret & WM831X_CHG_STATE_MASK) {
case WM831X_CHG_STATE_OFF:
*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
break;
case WM831X_CHG_STATE_TRICKLE:
case WM831X_CHG_STATE_FAST:
*status = POWER_SUPPLY_STATUS_CHARGING;
break;
default:
*status = POWER_SUPPLY_STATUS_UNKNOWN;
break;
}
return 0;
}
static int wm831x_bat_check_type(struct wm831x *wm831x, int *type)
{
int ret;
ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
if (ret < 0)
return ret;
switch (ret & WM831X_CHG_STATE_MASK) {
case WM831X_CHG_STATE_TRICKLE:
case WM831X_CHG_STATE_TRICKLE_OT:
*type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
break;
case WM831X_CHG_STATE_FAST:
case WM831X_CHG_STATE_FAST_OT:
*type = POWER_SUPPLY_CHARGE_TYPE_FAST;
break;
default:
*type = POWER_SUPPLY_CHARGE_TYPE_NONE;
break;
}
return 0;
}
static int wm831x_bat_check_health(struct wm831x *wm831x, int *health)
{
int ret;
ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
if (ret < 0)
return ret;
if (ret & WM831X_BATT_HOT_STS) {
*health = POWER_SUPPLY_HEALTH_OVERHEAT;
return 0;
}
if (ret & WM831X_BATT_COLD_STS) {
*health = POWER_SUPPLY_HEALTH_COLD;
return 0;
}
if (ret & WM831X_BATT_OV_STS) {
*health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
return 0;
}
switch (ret & WM831X_CHG_STATE_MASK) {
case WM831X_CHG_STATE_TRICKLE_OT:
case WM831X_CHG_STATE_FAST_OT:
*health = POWER_SUPPLY_HEALTH_OVERHEAT;
break;
case WM831X_CHG_STATE_DEFECTIVE:
*health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
break;
default:
*health = POWER_SUPPLY_HEALTH_GOOD;
break;
}
return 0;
}
static int wm831x_bat_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
struct wm831x *wm831x = wm831x_power->wm831x;
int ret = 0;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
ret = wm831x_bat_check_status(wm831x, &val->intval);
break;
case POWER_SUPPLY_PROP_ONLINE:
ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT,
val);
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val);
break;
case POWER_SUPPLY_PROP_HEALTH:
ret = wm831x_bat_check_health(wm831x, &val->intval);
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
ret = wm831x_bat_check_type(wm831x, &val->intval);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static enum power_supply_property wm831x_bat_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_CHARGE_TYPE,
};
static const char *wm831x_bat_irqs[] = {
"BATT HOT",
"BATT COLD",
"BATT FAIL",
"OV",
"END",
"TO",
"MODE",
"START",
};
static irqreturn_t wm831x_bat_irq(int irq, void *data)
{
struct wm831x_power *wm831x_power = data;
struct wm831x *wm831x = wm831x_power->wm831x;
dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq);
/* The battery charger is autonomous so we don't need to do
* anything except kick user space */
power_supply_changed(&wm831x_power->battery);
return IRQ_HANDLED;
}
/*********************************************************************
* Backup supply properties
*********************************************************************/
static void wm831x_config_backup(struct wm831x *wm831x)
{
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
struct wm831x_backup_pdata *pdata;
int ret, reg;
if (!wm831x_pdata || !wm831x_pdata->backup) {
dev_warn(wm831x->dev,
"No backup battery charger configuration\n");
return;
}
pdata = wm831x_pdata->backup;
reg = 0;
if (pdata->charger_enable)
reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
if (pdata->no_constant_voltage)
reg |= WM831X_BKUP_CHG_MODE;
switch (pdata->vlim) {
case 2500:
break;
case 3100:
reg |= WM831X_BKUP_CHG_VLIM;
break;
default:
dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
pdata->vlim);
}
switch (pdata->ilim) {
case 100:
break;
case 200:
reg |= 1;
break;
case 300:
reg |= 2;
break;
case 400:
reg |= 3;
break;
default:
dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
pdata->ilim);
}
ret = wm831x_reg_unlock(wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
return;
}
ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
WM831X_BKUP_CHG_ENA_MASK |
WM831X_BKUP_CHG_MODE_MASK |
WM831X_BKUP_BATT_DET_ENA_MASK |
WM831X_BKUP_CHG_VLIM_MASK |
WM831X_BKUP_CHG_ILIM_MASK,
reg);
if (ret != 0)
dev_err(wm831x->dev,
"Failed to set backup charger config: %d\n", ret);
wm831x_reg_lock(wm831x);
}
static int wm831x_backup_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
struct wm831x *wm831x = wm831x_power->wm831x;
int ret = 0;
ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
if (ret < 0)
return ret;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
if (ret & WM831X_BKUP_CHG_STS)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
val);
break;
case POWER_SUPPLY_PROP_PRESENT:
if (ret & WM831X_BKUP_CHG_STS)
val->intval = 1;
else
val->intval = 0;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static enum power_supply_property wm831x_backup_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_PRESENT,
};
/*********************************************************************
* Initialisation
*********************************************************************/
static irqreturn_t wm831x_syslo_irq(int irq, void *data)
{
struct wm831x_power *wm831x_power = data;
struct wm831x *wm831x = wm831x_power->wm831x;
/* Not much we can actually *do* but tell people for
* posterity, we're probably about to run out of power. */
dev_crit(wm831x->dev, "SYSVDD under voltage\n");
return IRQ_HANDLED;
}
static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
{
struct wm831x_power *wm831x_power = data;
struct wm831x *wm831x = wm831x_power->wm831x;
dev_dbg(wm831x->dev, "Power source changed\n");
/* Just notify for everything - little harm in overnotifying.
* The backup battery is not a power source while the system
* is running so skip that.
*/
power_supply_changed(&wm831x_power->battery);
power_supply_changed(&wm831x_power->usb);
power_supply_changed(&wm831x_power->wall);
return IRQ_HANDLED;
}
static __devinit int wm831x_power_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_power *power;
struct power_supply *usb;
struct power_supply *battery;
struct power_supply *wall;
struct power_supply *backup;
int ret, irq, i;
power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL);
if (power == NULL)
return -ENOMEM;
power->wm831x = wm831x;
platform_set_drvdata(pdev, power);
usb = &power->usb;
battery = &power->battery;
wall = &power->wall;
backup = &power->backup;
/* We ignore configuration failures since we can still read back
* the status without enabling either of the chargers.
*/
wm831x_config_battery(wm831x);
wm831x_config_backup(wm831x);
wall->name = "wm831x-wall";
wall->type = POWER_SUPPLY_TYPE_MAINS;
wall->properties = wm831x_wall_props;
wall->num_properties = ARRAY_SIZE(wm831x_wall_props);
wall->get_property = wm831x_wall_get_prop;
ret = power_supply_register(&pdev->dev, wall);
if (ret)
goto err_kmalloc;
battery->name = "wm831x-battery";
battery->properties = wm831x_bat_props;
battery->num_properties = ARRAY_SIZE(wm831x_bat_props);
battery->get_property = wm831x_bat_get_prop;
battery->use_for_apm = 1;
ret = power_supply_register(&pdev->dev, battery);
if (ret)
goto err_wall;
usb->name = "wm831x-usb",
usb->type = POWER_SUPPLY_TYPE_USB;
usb->properties = wm831x_usb_props;
usb->num_properties = ARRAY_SIZE(wm831x_usb_props);
usb->get_property = wm831x_usb_get_prop;
ret = power_supply_register(&pdev->dev, usb);
if (ret)
goto err_battery;
backup->name = "wm831x-backup";
backup->type = POWER_SUPPLY_TYPE_BATTERY;
backup->properties = wm831x_backup_props;
backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
backup->get_property = wm831x_backup_get_prop;
ret = power_supply_register(&pdev->dev, backup);
if (ret)
goto err_usb;
irq = platform_get_irq_byname(pdev, "SYSLO");
ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq,
IRQF_TRIGGER_RISING, "SYSLO",
power);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
irq, ret);
goto err_backup;
}
irq = platform_get_irq_byname(pdev, "PWR SRC");
ret = wm831x_request_irq(wm831x, irq, wm831x_pwr_src_irq,
IRQF_TRIGGER_RISING, "Power source",
power);
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
irq, ret);
goto err_syslo;
}
for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
ret = wm831x_request_irq(wm831x, irq, wm831x_bat_irq,
IRQF_TRIGGER_RISING,
wm831x_bat_irqs[i],
power);
if (ret != 0) {
dev_err(&pdev->dev,
"Failed to request %s IRQ %d: %d\n",
wm831x_bat_irqs[i], irq, ret);
goto err_bat_irq;
}
}
return ret;
err_bat_irq:
for (; i >= 0; i--) {
irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
wm831x_free_irq(wm831x, irq, power);
}
irq = platform_get_irq_byname(pdev, "PWR SRC");
wm831x_free_irq(wm831x, irq, power);
err_syslo:
irq = platform_get_irq_byname(pdev, "SYSLO");
wm831x_free_irq(wm831x, irq, power);
err_backup:
power_supply_unregister(backup);
err_usb:
power_supply_unregister(usb);
err_battery:
power_supply_unregister(battery);
err_wall:
power_supply_unregister(wall);
err_kmalloc:
kfree(power);
return ret;
}
static __devexit int wm831x_power_remove(struct platform_device *pdev)
{
struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
struct wm831x *wm831x = wm831x_power->wm831x;
int irq, i;
for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
wm831x_free_irq(wm831x, irq, wm831x_power);
}
irq = platform_get_irq_byname(pdev, "PWR SRC");
wm831x_free_irq(wm831x, irq, wm831x_power);
irq = platform_get_irq_byname(pdev, "SYSLO");
wm831x_free_irq(wm831x, irq, wm831x_power);
power_supply_unregister(&wm831x_power->backup);
power_supply_unregister(&wm831x_power->battery);
power_supply_unregister(&wm831x_power->wall);
power_supply_unregister(&wm831x_power->usb);
return 0;
}
static struct platform_driver wm831x_power_driver = {
.probe = wm831x_power_probe,
.remove = __devexit_p(wm831x_power_remove),
.driver = {
.name = "wm831x-power",
},
};
static int __init wm831x_power_init(void)
{
return platform_driver_register(&wm831x_power_driver);
}
module_init(wm831x_power_init);
static void __exit wm831x_power_exit(void)
{
platform_driver_unregister(&wm831x_power_driver);
}
module_exit(wm831x_power_exit);
MODULE_DESCRIPTION("Power supply driver for WM831x PMICs");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-power");

View file

@ -321,6 +321,24 @@ static int wm8350_bat_check_health(struct wm8350 *wm8350)
return POWER_SUPPLY_HEALTH_GOOD;
}
static int wm8350_bat_get_charge_type(struct wm8350 *wm8350)
{
int state;
state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
WM8350_CHG_STS_MASK;
switch (state) {
case WM8350_CHG_STS_OFF:
return POWER_SUPPLY_CHARGE_TYPE_NONE;
case WM8350_CHG_STS_TRICKLE:
return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
case WM8350_CHG_STS_FAST:
return POWER_SUPPLY_CHARGE_TYPE_FAST;
default:
return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
}
}
static int wm8350_bat_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
@ -342,6 +360,9 @@ static int wm8350_bat_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_HEALTH:
val->intval = wm8350_bat_check_health(wm8350);
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
val->intval = wm8350_bat_get_charge_type(wm8350);
break;
default:
ret = -EINVAL;
break;
@ -355,6 +376,7 @@ static enum power_supply_property wm8350_bat_props[] = {
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_CHARGE_TYPE,
};
/*********************************************************************

View file

@ -22,17 +22,20 @@
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/irq.h>
static DEFINE_MUTEX(bat_lock);
static struct work_struct bat_work;
struct mutex work_lock;
static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
static struct wm97xx_batt_info *pdata;
static struct wm97xx_batt_info *gpdata;
static enum power_supply_property *prop;
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
{
struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->batt_aux) * pdata->batt_mult /
pdata->batt_div;
@ -40,6 +43,9 @@ static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
{
struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->temp_aux) * pdata->temp_mult /
pdata->temp_div;
@ -49,6 +55,9 @@ static int wm97xx_bat_get_property(struct power_supply *bat_ps,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
val->intval = bat_status;
@ -97,6 +106,8 @@ static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps)
static void wm97xx_bat_update(struct power_supply *bat_ps)
{
int old_status = bat_status;
struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
mutex_lock(&work_lock);
@ -127,21 +138,29 @@ static void wm97xx_bat_work(struct work_struct *work)
wm97xx_bat_update(&bat_ps);
}
static irqreturn_t wm97xx_chrg_irq(int irq, void *data)
{
schedule_work(&bat_work);
return IRQ_HANDLED;
}
#ifdef CONFIG_PM
static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state)
static int wm97xx_bat_suspend(struct device *dev)
{
flush_scheduled_work();
return 0;
}
static int wm97xx_bat_resume(struct platform_device *dev)
static int wm97xx_bat_resume(struct device *dev)
{
schedule_work(&bat_work);
return 0;
}
#else
#define wm97xx_bat_suspend NULL
#define wm97xx_bat_resume NULL
static struct dev_pm_ops wm97xx_bat_pm_ops = {
.suspend = wm97xx_bat_suspend,
.resume = wm97xx_bat_resume,
};
#endif
static int __devinit wm97xx_bat_probe(struct platform_device *dev)
@ -149,6 +168,15 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
int ret = 0;
int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
int i = 0;
struct wm97xx_pdata *wmdata = dev->dev.platform_data;
struct wm97xx_batt_pdata *pdata;
if (gpdata) {
dev_err(&dev->dev, "Do not pass platform_data through "
"wm97xx_bat_set_pdata!\n");
return -EINVAL;
} else
pdata = wmdata->batt_pdata;
if (dev->id != -1)
return -EINVAL;
@ -156,15 +184,20 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
mutex_init(&work_lock);
if (!pdata) {
dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n");
dev_err(&dev->dev, "No platform_data supplied\n");
return -EINVAL;
}
if (pdata->charge_gpio >= 0 && gpio_is_valid(pdata->charge_gpio)) {
if (gpio_is_valid(pdata->charge_gpio)) {
ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
if (ret)
goto err;
ret = gpio_direction_input(pdata->charge_gpio);
if (ret)
goto err2;
ret = request_irq(gpio_to_irq(pdata->charge_gpio),
wm97xx_chrg_irq, IRQF_DISABLED,
"AC Detect", 0);
if (ret)
goto err2;
props++; /* POWER_SUPPLY_PROP_STATUS */
@ -183,7 +216,7 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
if (!prop)
goto err2;
goto err3;
prop[i++] = POWER_SUPPLY_PROP_PRESENT;
if (pdata->charge_gpio >= 0)
@ -216,21 +249,30 @@ static int __devinit wm97xx_bat_probe(struct platform_device *dev)
if (!ret)
schedule_work(&bat_work);
else
goto err3;
goto err4;
return 0;
err3:
err4:
kfree(prop);
err3:
if (gpio_is_valid(pdata->charge_gpio))
free_irq(gpio_to_irq(pdata->charge_gpio), dev);
err2:
gpio_free(pdata->charge_gpio);
if (gpio_is_valid(pdata->charge_gpio))
gpio_free(pdata->charge_gpio);
err:
return ret;
}
static int __devexit wm97xx_bat_remove(struct platform_device *dev)
{
if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0)
struct wm97xx_pdata *wmdata = dev->dev.platform_data;
struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
if (pdata && gpio_is_valid(pdata->charge_gpio)) {
free_irq(gpio_to_irq(pdata->charge_gpio), dev);
gpio_free(pdata->charge_gpio);
}
flush_scheduled_work();
power_supply_unregister(&bat_ps);
kfree(prop);
@ -241,11 +283,12 @@ static struct platform_driver wm97xx_bat_driver = {
.driver = {
.name = "wm97xx-battery",
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &wm97xx_bat_pm_ops,
#endif
},
.probe = wm97xx_bat_probe,
.remove = __devexit_p(wm97xx_bat_remove),
.suspend = wm97xx_bat_suspend,
.resume = wm97xx_bat_resume,
};
static int __init wm97xx_bat_init(void)
@ -258,9 +301,9 @@ static void __exit wm97xx_bat_exit(void)
platform_driver_unregister(&wm97xx_bat_driver);
}
void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
{
pdata = data;
gpdata = data;
}
EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);

View file

@ -0,0 +1,189 @@
/*
* include/linux/mfd/wm831x/pmu.h -- PMU for WM831x
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MFD_WM831X_PMU_H__
#define __MFD_WM831X_PMU_H__
/*
* R16387 (0x4003) - Power State
*/
#define WM831X_CHIP_ON 0x8000 /* CHIP_ON */
#define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */
#define WM831X_CHIP_ON_SHIFT 15 /* CHIP_ON */
#define WM831X_CHIP_ON_WIDTH 1 /* CHIP_ON */
#define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */
#define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */
#define WM831X_CHIP_SLP_SHIFT 14 /* CHIP_SLP */
#define WM831X_CHIP_SLP_WIDTH 1 /* CHIP_SLP */
#define WM831X_REF_LP 0x1000 /* REF_LP */
#define WM831X_REF_LP_MASK 0x1000 /* REF_LP */
#define WM831X_REF_LP_SHIFT 12 /* REF_LP */
#define WM831X_REF_LP_WIDTH 1 /* REF_LP */
#define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */
#define WM831X_PWRSTATE_DLY_SHIFT 10 /* PWRSTATE_DLY - [11:10] */
#define WM831X_PWRSTATE_DLY_WIDTH 2 /* PWRSTATE_DLY - [11:10] */
#define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */
#define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */
#define WM831X_SWRST_DLY_SHIFT 9 /* SWRST_DLY */
#define WM831X_SWRST_DLY_WIDTH 1 /* SWRST_DLY */
#define WM831X_USB100MA_STARTUP_MASK 0x0030 /* USB100MA_STARTUP - [5:4] */
#define WM831X_USB100MA_STARTUP_SHIFT 4 /* USB100MA_STARTUP - [5:4] */
#define WM831X_USB100MA_STARTUP_WIDTH 2 /* USB100MA_STARTUP - [5:4] */
#define WM831X_USB_CURR_STS 0x0008 /* USB_CURR_STS */
#define WM831X_USB_CURR_STS_MASK 0x0008 /* USB_CURR_STS */
#define WM831X_USB_CURR_STS_SHIFT 3 /* USB_CURR_STS */
#define WM831X_USB_CURR_STS_WIDTH 1 /* USB_CURR_STS */
#define WM831X_USB_ILIM_MASK 0x0007 /* USB_ILIM - [2:0] */
#define WM831X_USB_ILIM_SHIFT 0 /* USB_ILIM - [2:0] */
#define WM831X_USB_ILIM_WIDTH 3 /* USB_ILIM - [2:0] */
/*
* R16397 (0x400D) - System Status
*/
#define WM831X_THW_STS 0x8000 /* THW_STS */
#define WM831X_THW_STS_MASK 0x8000 /* THW_STS */
#define WM831X_THW_STS_SHIFT 15 /* THW_STS */
#define WM831X_THW_STS_WIDTH 1 /* THW_STS */
#define WM831X_PWR_SRC_BATT 0x0400 /* PWR_SRC_BATT */
#define WM831X_PWR_SRC_BATT_MASK 0x0400 /* PWR_SRC_BATT */
#define WM831X_PWR_SRC_BATT_SHIFT 10 /* PWR_SRC_BATT */
#define WM831X_PWR_SRC_BATT_WIDTH 1 /* PWR_SRC_BATT */
#define WM831X_PWR_WALL 0x0200 /* PWR_WALL */
#define WM831X_PWR_WALL_MASK 0x0200 /* PWR_WALL */
#define WM831X_PWR_WALL_SHIFT 9 /* PWR_WALL */
#define WM831X_PWR_WALL_WIDTH 1 /* PWR_WALL */
#define WM831X_PWR_USB 0x0100 /* PWR_USB */
#define WM831X_PWR_USB_MASK 0x0100 /* PWR_USB */
#define WM831X_PWR_USB_SHIFT 8 /* PWR_USB */
#define WM831X_PWR_USB_WIDTH 1 /* PWR_USB */
#define WM831X_MAIN_STATE_MASK 0x001F /* MAIN_STATE - [4:0] */
#define WM831X_MAIN_STATE_SHIFT 0 /* MAIN_STATE - [4:0] */
#define WM831X_MAIN_STATE_WIDTH 5 /* MAIN_STATE - [4:0] */
/*
* R16456 (0x4048) - Charger Control 1
*/
#define WM831X_CHG_ENA 0x8000 /* CHG_ENA */
#define WM831X_CHG_ENA_MASK 0x8000 /* CHG_ENA */
#define WM831X_CHG_ENA_SHIFT 15 /* CHG_ENA */
#define WM831X_CHG_ENA_WIDTH 1 /* CHG_ENA */
#define WM831X_CHG_FRC 0x4000 /* CHG_FRC */
#define WM831X_CHG_FRC_MASK 0x4000 /* CHG_FRC */
#define WM831X_CHG_FRC_SHIFT 14 /* CHG_FRC */
#define WM831X_CHG_FRC_WIDTH 1 /* CHG_FRC */
#define WM831X_CHG_ITERM_MASK 0x1C00 /* CHG_ITERM - [12:10] */
#define WM831X_CHG_ITERM_SHIFT 10 /* CHG_ITERM - [12:10] */
#define WM831X_CHG_ITERM_WIDTH 3 /* CHG_ITERM - [12:10] */
#define WM831X_CHG_FAST 0x0020 /* CHG_FAST */
#define WM831X_CHG_FAST_MASK 0x0020 /* CHG_FAST */
#define WM831X_CHG_FAST_SHIFT 5 /* CHG_FAST */
#define WM831X_CHG_FAST_WIDTH 1 /* CHG_FAST */
#define WM831X_CHG_IMON_ENA 0x0002 /* CHG_IMON_ENA */
#define WM831X_CHG_IMON_ENA_MASK 0x0002 /* CHG_IMON_ENA */
#define WM831X_CHG_IMON_ENA_SHIFT 1 /* CHG_IMON_ENA */
#define WM831X_CHG_IMON_ENA_WIDTH 1 /* CHG_IMON_ENA */
#define WM831X_CHG_CHIP_TEMP_MON 0x0001 /* CHG_CHIP_TEMP_MON */
#define WM831X_CHG_CHIP_TEMP_MON_MASK 0x0001 /* CHG_CHIP_TEMP_MON */
#define WM831X_CHG_CHIP_TEMP_MON_SHIFT 0 /* CHG_CHIP_TEMP_MON */
#define WM831X_CHG_CHIP_TEMP_MON_WIDTH 1 /* CHG_CHIP_TEMP_MON */
/*
* R16457 (0x4049) - Charger Control 2
*/
#define WM831X_CHG_OFF_MSK 0x4000 /* CHG_OFF_MSK */
#define WM831X_CHG_OFF_MSK_MASK 0x4000 /* CHG_OFF_MSK */
#define WM831X_CHG_OFF_MSK_SHIFT 14 /* CHG_OFF_MSK */
#define WM831X_CHG_OFF_MSK_WIDTH 1 /* CHG_OFF_MSK */
#define WM831X_CHG_TIME_MASK 0x0F00 /* CHG_TIME - [11:8] */
#define WM831X_CHG_TIME_SHIFT 8 /* CHG_TIME - [11:8] */
#define WM831X_CHG_TIME_WIDTH 4 /* CHG_TIME - [11:8] */
#define WM831X_CHG_TRKL_ILIM_MASK 0x00C0 /* CHG_TRKL_ILIM - [7:6] */
#define WM831X_CHG_TRKL_ILIM_SHIFT 6 /* CHG_TRKL_ILIM - [7:6] */
#define WM831X_CHG_TRKL_ILIM_WIDTH 2 /* CHG_TRKL_ILIM - [7:6] */
#define WM831X_CHG_VSEL_MASK 0x0030 /* CHG_VSEL - [5:4] */
#define WM831X_CHG_VSEL_SHIFT 4 /* CHG_VSEL - [5:4] */
#define WM831X_CHG_VSEL_WIDTH 2 /* CHG_VSEL - [5:4] */
#define WM831X_CHG_FAST_ILIM_MASK 0x000F /* CHG_FAST_ILIM - [3:0] */
#define WM831X_CHG_FAST_ILIM_SHIFT 0 /* CHG_FAST_ILIM - [3:0] */
#define WM831X_CHG_FAST_ILIM_WIDTH 4 /* CHG_FAST_ILIM - [3:0] */
/*
* R16458 (0x404A) - Charger Status
*/
#define WM831X_BATT_OV_STS 0x8000 /* BATT_OV_STS */
#define WM831X_BATT_OV_STS_MASK 0x8000 /* BATT_OV_STS */
#define WM831X_BATT_OV_STS_SHIFT 15 /* BATT_OV_STS */
#define WM831X_BATT_OV_STS_WIDTH 1 /* BATT_OV_STS */
#define WM831X_CHG_STATE_MASK 0x7000 /* CHG_STATE - [14:12] */
#define WM831X_CHG_STATE_SHIFT 12 /* CHG_STATE - [14:12] */
#define WM831X_CHG_STATE_WIDTH 3 /* CHG_STATE - [14:12] */
#define WM831X_BATT_HOT_STS 0x0800 /* BATT_HOT_STS */
#define WM831X_BATT_HOT_STS_MASK 0x0800 /* BATT_HOT_STS */
#define WM831X_BATT_HOT_STS_SHIFT 11 /* BATT_HOT_STS */
#define WM831X_BATT_HOT_STS_WIDTH 1 /* BATT_HOT_STS */
#define WM831X_BATT_COLD_STS 0x0400 /* BATT_COLD_STS */
#define WM831X_BATT_COLD_STS_MASK 0x0400 /* BATT_COLD_STS */
#define WM831X_BATT_COLD_STS_SHIFT 10 /* BATT_COLD_STS */
#define WM831X_BATT_COLD_STS_WIDTH 1 /* BATT_COLD_STS */
#define WM831X_CHG_TOPOFF 0x0200 /* CHG_TOPOFF */
#define WM831X_CHG_TOPOFF_MASK 0x0200 /* CHG_TOPOFF */
#define WM831X_CHG_TOPOFF_SHIFT 9 /* CHG_TOPOFF */
#define WM831X_CHG_TOPOFF_WIDTH 1 /* CHG_TOPOFF */
#define WM831X_CHG_ACTIVE 0x0100 /* CHG_ACTIVE */
#define WM831X_CHG_ACTIVE_MASK 0x0100 /* CHG_ACTIVE */
#define WM831X_CHG_ACTIVE_SHIFT 8 /* CHG_ACTIVE */
#define WM831X_CHG_ACTIVE_WIDTH 1 /* CHG_ACTIVE */
#define WM831X_CHG_TIME_ELAPSED_MASK 0x00FF /* CHG_TIME_ELAPSED - [7:0] */
#define WM831X_CHG_TIME_ELAPSED_SHIFT 0 /* CHG_TIME_ELAPSED - [7:0] */
#define WM831X_CHG_TIME_ELAPSED_WIDTH 8 /* CHG_TIME_ELAPSED - [7:0] */
#define WM831X_CHG_STATE_OFF (0 << WM831X_CHG_STATE_SHIFT)
#define WM831X_CHG_STATE_TRICKLE (1 << WM831X_CHG_STATE_SHIFT)
#define WM831X_CHG_STATE_FAST (2 << WM831X_CHG_STATE_SHIFT)
#define WM831X_CHG_STATE_TRICKLE_OT (3 << WM831X_CHG_STATE_SHIFT)
#define WM831X_CHG_STATE_FAST_OT (4 << WM831X_CHG_STATE_SHIFT)
#define WM831X_CHG_STATE_DEFECTIVE (5 << WM831X_CHG_STATE_SHIFT)
/*
* R16459 (0x404B) - Backup Charger Control
*/
#define WM831X_BKUP_CHG_ENA 0x8000 /* BKUP_CHG_ENA */
#define WM831X_BKUP_CHG_ENA_MASK 0x8000 /* BKUP_CHG_ENA */
#define WM831X_BKUP_CHG_ENA_SHIFT 15 /* BKUP_CHG_ENA */
#define WM831X_BKUP_CHG_ENA_WIDTH 1 /* BKUP_CHG_ENA */
#define WM831X_BKUP_CHG_STS 0x4000 /* BKUP_CHG_STS */
#define WM831X_BKUP_CHG_STS_MASK 0x4000 /* BKUP_CHG_STS */
#define WM831X_BKUP_CHG_STS_SHIFT 14 /* BKUP_CHG_STS */
#define WM831X_BKUP_CHG_STS_WIDTH 1 /* BKUP_CHG_STS */
#define WM831X_BKUP_CHG_MODE 0x1000 /* BKUP_CHG_MODE */
#define WM831X_BKUP_CHG_MODE_MASK 0x1000 /* BKUP_CHG_MODE */
#define WM831X_BKUP_CHG_MODE_SHIFT 12 /* BKUP_CHG_MODE */
#define WM831X_BKUP_CHG_MODE_WIDTH 1 /* BKUP_CHG_MODE */
#define WM831X_BKUP_BATT_DET_ENA 0x0800 /* BKUP_BATT_DET_ENA */
#define WM831X_BKUP_BATT_DET_ENA_MASK 0x0800 /* BKUP_BATT_DET_ENA */
#define WM831X_BKUP_BATT_DET_ENA_SHIFT 11 /* BKUP_BATT_DET_ENA */
#define WM831X_BKUP_BATT_DET_ENA_WIDTH 1 /* BKUP_BATT_DET_ENA */
#define WM831X_BKUP_BATT_STS 0x0400 /* BKUP_BATT_STS */
#define WM831X_BKUP_BATT_STS_MASK 0x0400 /* BKUP_BATT_STS */
#define WM831X_BKUP_BATT_STS_SHIFT 10 /* BKUP_BATT_STS */
#define WM831X_BKUP_BATT_STS_WIDTH 1 /* BKUP_BATT_STS */
#define WM831X_BKUP_CHG_VLIM 0x0010 /* BKUP_CHG_VLIM */
#define WM831X_BKUP_CHG_VLIM_MASK 0x0010 /* BKUP_CHG_VLIM */
#define WM831X_BKUP_CHG_VLIM_SHIFT 4 /* BKUP_CHG_VLIM */
#define WM831X_BKUP_CHG_VLIM_WIDTH 1 /* BKUP_CHG_VLIM */
#define WM831X_BKUP_CHG_ILIM_MASK 0x0003 /* BKUP_CHG_ILIM - [1:0] */
#define WM831X_BKUP_CHG_ILIM_SHIFT 0 /* BKUP_CHG_ILIM - [1:0] */
#define WM831X_BKUP_CHG_ILIM_WIDTH 2 /* BKUP_CHG_ILIM - [1:0] */
#endif

View file

@ -38,6 +38,13 @@ enum {
POWER_SUPPLY_STATUS_FULL,
};
enum {
POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0,
POWER_SUPPLY_CHARGE_TYPE_NONE,
POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
POWER_SUPPLY_CHARGE_TYPE_FAST,
};
enum {
POWER_SUPPLY_HEALTH_UNKNOWN = 0,
POWER_SUPPLY_HEALTH_GOOD,
@ -58,9 +65,19 @@ enum {
POWER_SUPPLY_TECHNOLOGY_LiMn,
};
enum {
POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
POWER_SUPPLY_CAPACITY_LEVEL_LOW,
POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
POWER_SUPPLY_CAPACITY_LEVEL_FULL,
};
enum power_supply_property {
/* Properties of type `int' */
POWER_SUPPLY_PROP_STATUS = 0,
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
@ -89,6 +106,7 @@ enum power_supply_property {
POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_ENERGY_AVG,
POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
@ -126,6 +144,7 @@ struct power_supply {
enum power_supply_property psp,
union power_supply_propval *val);
void (*external_power_changed)(struct power_supply *psy);
void (*set_charged)(struct power_supply *psy);
/* For APM emulation, think legacy userspace. */
int use_for_apm;
@ -165,8 +184,10 @@ struct power_supply_info {
int use_for_apm;
};
extern struct power_supply *power_supply_get_by_name(char *name);
extern void power_supply_changed(struct power_supply *psy);
extern int power_supply_am_i_supplied(struct power_supply *psy);
extern int power_supply_set_battery_charged(struct power_supply *psy);
#if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE)
extern int power_supply_is_system_supplied(void);

View file

@ -293,6 +293,24 @@ struct wm97xx {
u16 suspend_mode; /* PRP in suspend mode */
};
struct wm97xx_batt_pdata {
int batt_aux;
int temp_aux;
int charge_gpio;
int min_voltage;
int max_voltage;
int batt_div;
int batt_mult;
int temp_div;
int temp_mult;
int batt_tech;
char *batt_name;
};
struct wm97xx_pdata {
struct wm97xx_batt_pdata *batt_pdata; /* battery data */
};
/*
* Codec GPIO access (not supported on WM9705)
* This can be used to set/get codec GPIO and Virtual GPIO status.

View file

@ -3,22 +3,12 @@
#include <linux/wm97xx.h>
struct wm97xx_batt_info {
int batt_aux;
int temp_aux;
int charge_gpio;
int min_voltage;
int max_voltage;
int batt_div;
int batt_mult;
int temp_div;
int temp_mult;
int batt_tech;
char *batt_name;
};
#warning This file will be removed soon, use wm97xx.h instead!
#define wm97xx_batt_info wm97xx_batt_pdata
#ifdef CONFIG_BATTERY_WM97XX
void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
#else
static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
#endif