Add a generic associative array implementation.

Add a generic associative array implementation that can be used as the
container for keyrings, thereby massively increasing the capacity available
whilst also speeding up searching in keyrings that contain a lot of keys.

This may also be useful in FS-Cache for tracking cookies.

Documentation is added into Documentation/associative_array.txt

Some of the properties of the implementation are:

 (1) Objects are opaque pointers.  The implementation does not care where they
     point (if anywhere) or what they point to (if anything).

     [!] NOTE: Pointers to objects _must_ be zero in the two least significant
     	       bits.

 (2) Objects do not need to contain linkage blocks for use by the array.  This
     permits an object to be located in multiple arrays simultaneously.
     Rather, the array is made up of metadata blocks that point to objects.

 (3) Objects are labelled as being one of two types (the type is a bool value).
     This information is stored in the array, but has no consequence to the
     array itself or its algorithms.

 (4) Objects require index keys to locate them within the array.

 (5) Index keys must be unique.  Inserting an object with the same key as one
     already in the array will replace the old object.

 (6) Index keys can be of any length and can be of different lengths.

 (7) Index keys should encode the length early on, before any variation due to
     length is seen.

 (8) Index keys can include a hash to scatter objects throughout the array.

 (9) The array can iterated over.  The objects will not necessarily come out in
     key order.

(10) The array can be iterated whilst it is being modified, provided the RCU
     readlock is being held by the iterator.  Note, however, under these
     circumstances, some objects may be seen more than once.  If this is a
     problem, the iterator should lock against modification.  Objects will not
     be missed, however, unless deleted.

(11) Objects in the array can be looked up by means of their index key.

(12) Objects can be looked up whilst the array is being modified, provided the
     RCU readlock is being held by the thread doing the look up.

The implementation uses a tree of 16-pointer nodes internally that are indexed
on each level by nibbles from the index key.  To improve memory efficiency,
shortcuts can be emplaced to skip over what would otherwise be a series of
single-occupancy nodes.  Further, nodes pack leaf object pointers into spare
space in the node rather than making an extra branch until as such time an
object needs to be added to a full node.

Signed-off-by: David Howells <dhowells@redhat.com>
This commit is contained in:
David Howells 2013-09-24 10:35:17 +01:00
parent e57e8669f2
commit 3cb989501c
6 changed files with 2608 additions and 0 deletions

View file

@ -0,0 +1,574 @@
========================================
GENERIC ASSOCIATIVE ARRAY IMPLEMENTATION
========================================
Contents:
- Overview.
- The public API.
- Edit script.
- Operations table.
- Manipulation functions.
- Access functions.
- Index key form.
- Internal workings.
- Basic internal tree layout.
- Shortcuts.
- Splitting and collapsing nodes.
- Non-recursive iteration.
- Simultaneous alteration and iteration.
========
OVERVIEW
========
This associative array implementation is an object container with the following
properties:
(1) Objects are opaque pointers. The implementation does not care where they
point (if anywhere) or what they point to (if anything).
[!] NOTE: Pointers to objects _must_ be zero in the least significant bit.
(2) Objects do not need to contain linkage blocks for use by the array. This
permits an object to be located in multiple arrays simultaneously.
Rather, the array is made up of metadata blocks that point to objects.
(3) Objects require index keys to locate them within the array.
(4) Index keys must be unique. Inserting an object with the same key as one
already in the array will replace the old object.
(5) Index keys can be of any length and can be of different lengths.
(6) Index keys should encode the length early on, before any variation due to
length is seen.
(7) Index keys can include a hash to scatter objects throughout the array.
(8) The array can iterated over. The objects will not necessarily come out in
key order.
(9) The array can be iterated over whilst it is being modified, provided the
RCU readlock is being held by the iterator. Note, however, under these
circumstances, some objects may be seen more than once. If this is a
problem, the iterator should lock against modification. Objects will not
be missed, however, unless deleted.
(10) Objects in the array can be looked up by means of their index key.
(11) Objects can be looked up whilst the array is being modified, provided the
RCU readlock is being held by the thread doing the look up.
The implementation uses a tree of 16-pointer nodes internally that are indexed
on each level by nibbles from the index key in the same manner as in a radix
tree. To improve memory efficiency, shortcuts can be emplaced to skip over
what would otherwise be a series of single-occupancy nodes. Further, nodes
pack leaf object pointers into spare space in the node rather than making an
extra branch until as such time an object needs to be added to a full node.
==============
THE PUBLIC API
==============
The public API can be found in <linux/assoc_array.h>. The associative array is
rooted on the following structure:
struct assoc_array {
...
};
The code is selected by enabling CONFIG_ASSOCIATIVE_ARRAY.
EDIT SCRIPT
-----------
The insertion and deletion functions produce an 'edit script' that can later be
applied to effect the changes without risking ENOMEM. This retains the
preallocated metadata blocks that will be installed in the internal tree and
keeps track of the metadata blocks that will be removed from the tree when the
script is applied.
This is also used to keep track of dead blocks and dead objects after the
script has been applied so that they can be freed later. The freeing is done
after an RCU grace period has passed - thus allowing access functions to
proceed under the RCU read lock.
The script appears as outside of the API as a pointer of the type:
struct assoc_array_edit;
There are two functions for dealing with the script:
(1) Apply an edit script.
void assoc_array_apply_edit(struct assoc_array_edit *edit);
This will perform the edit functions, interpolating various write barriers
to permit accesses under the RCU read lock to continue. The edit script
will then be passed to call_rcu() to free it and any dead stuff it points
to.
(2) Cancel an edit script.
void assoc_array_cancel_edit(struct assoc_array_edit *edit);
This frees the edit script and all preallocated memory immediately. If
this was for insertion, the new object is _not_ released by this function,
but must rather be released by the caller.
These functions are guaranteed not to fail.
OPERATIONS TABLE
----------------
Various functions take a table of operations:
struct assoc_array_ops {
...
};
This points to a number of methods, all of which need to be provided:
(1) Get a chunk of index key from caller data:
unsigned long (*get_key_chunk)(const void *index_key, int level);
This should return a chunk of caller-supplied index key starting at the
*bit* position given by the level argument. The level argument will be a
multiple of ASSOC_ARRAY_KEY_CHUNK_SIZE and the function should return
ASSOC_ARRAY_KEY_CHUNK_SIZE bits. No error is possible.
(2) Get a chunk of an object's index key.
unsigned long (*get_object_key_chunk)(const void *object, int level);
As the previous function, but gets its data from an object in the array
rather than from a caller-supplied index key.
(3) See if this is the object we're looking for.
bool (*compare_object)(const void *object, const void *index_key);
Compare the object against an index key and return true if it matches and
false if it doesn't.
(4) Diff the index keys of two objects.
int (*diff_objects)(const void *a, const void *b);
Return the bit position at which the index keys of two objects differ or
-1 if they are the same.
(5) Free an object.
void (*free_object)(void *object);
Free the specified object. Note that this may be called an RCU grace
period after assoc_array_apply_edit() was called, so synchronize_rcu() may
be necessary on module unloading.
MANIPULATION FUNCTIONS
----------------------
There are a number of functions for manipulating an associative array:
(1) Initialise an associative array.
void assoc_array_init(struct assoc_array *array);
This initialises the base structure for an associative array. It can't
fail.
(2) Insert/replace an object in an associative array.
struct assoc_array_edit *
assoc_array_insert(struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key,
void *object);
This inserts the given object into the array. Note that the least
significant bit of the pointer must be zero as it's used to type-mark
pointers internally.
If an object already exists for that key then it will be replaced with the
new object and the old one will be freed automatically.
The index_key argument should hold index key information and is
passed to the methods in the ops table when they are called.
This function makes no alteration to the array itself, but rather returns
an edit script that must be applied. -ENOMEM is returned in the case of
an out-of-memory error.
The caller should lock exclusively against other modifiers of the array.
(3) Delete an object from an associative array.
struct assoc_array_edit *
assoc_array_delete(struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key);
This deletes an object that matches the specified data from the array.
The index_key argument should hold index key information and is
passed to the methods in the ops table when they are called.
This function makes no alteration to the array itself, but rather returns
an edit script that must be applied. -ENOMEM is returned in the case of
an out-of-memory error. NULL will be returned if the specified object is
not found within the array.
The caller should lock exclusively against other modifiers of the array.
(4) Delete all objects from an associative array.
struct assoc_array_edit *
assoc_array_clear(struct assoc_array *array,
const struct assoc_array_ops *ops);
This deletes all the objects from an associative array and leaves it
completely empty.
This function makes no alteration to the array itself, but rather returns
an edit script that must be applied. -ENOMEM is returned in the case of
an out-of-memory error.
The caller should lock exclusively against other modifiers of the array.
(5) Destroy an associative array, deleting all objects.
void assoc_array_destroy(struct assoc_array *array,
const struct assoc_array_ops *ops);
This destroys the contents of the associative array and leaves it
completely empty. It is not permitted for another thread to be traversing
the array under the RCU read lock at the same time as this function is
destroying it as no RCU deferral is performed on memory release -
something that would require memory to be allocated.
The caller should lock exclusively against other modifiers and accessors
of the array.
(6) Garbage collect an associative array.
int assoc_array_gc(struct assoc_array *array,
const struct assoc_array_ops *ops,
bool (*iterator)(void *object, void *iterator_data),
void *iterator_data);
This iterates over the objects in an associative array and passes each one
to iterator(). If iterator() returns true, the object is kept. If it
returns false, the object will be freed. If the iterator() function
returns true, it must perform any appropriate refcount incrementing on the
object before returning.
The internal tree will be packed down if possible as part of the iteration
to reduce the number of nodes in it.
The iterator_data is passed directly to iterator() and is otherwise
ignored by the function.
The function will return 0 if successful and -ENOMEM if there wasn't
enough memory.
It is possible for other threads to iterate over or search the array under
the RCU read lock whilst this function is in progress. The caller should
lock exclusively against other modifiers of the array.
ACCESS FUNCTIONS
----------------
There are two functions for accessing an associative array:
(1) Iterate over all the objects in an associative array.
int assoc_array_iterate(const struct assoc_array *array,
int (*iterator)(const void *object,
void *iterator_data),
void *iterator_data);
This passes each object in the array to the iterator callback function.
iterator_data is private data for that function.
This may be used on an array at the same time as the array is being
modified, provided the RCU read lock is held. Under such circumstances,
it is possible for the iteration function to see some objects twice. If
this is a problem, then modification should be locked against. The
iteration algorithm should not, however, miss any objects.
The function will return 0 if no objects were in the array or else it will
return the result of the last iterator function called. Iteration stops
immediately if any call to the iteration function results in a non-zero
return.
(2) Find an object in an associative array.
void *assoc_array_find(const struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key);
This walks through the array's internal tree directly to the object
specified by the index key..
This may be used on an array at the same time as the array is being
modified, provided the RCU read lock is held.
The function will return the object if found (and set *_type to the object
type) or will return NULL if the object was not found.
INDEX KEY FORM
--------------
The index key can be of any form, but since the algorithms aren't told how long
the key is, it is strongly recommended that the index key includes its length
very early on before any variation due to the length would have an effect on
comparisons.
This will cause leaves with different length keys to scatter away from each
other - and those with the same length keys to cluster together.
It is also recommended that the index key begin with a hash of the rest of the
key to maximise scattering throughout keyspace.
The better the scattering, the wider and lower the internal tree will be.
Poor scattering isn't too much of a problem as there are shortcuts and nodes
can contain mixtures of leaves and metadata pointers.
The index key is read in chunks of machine word. Each chunk is subdivided into
one nibble (4 bits) per level, so on a 32-bit CPU this is good for 8 levels and
on a 64-bit CPU, 16 levels. Unless the scattering is really poor, it is
unlikely that more than one word of any particular index key will have to be
used.
=================
INTERNAL WORKINGS
=================
The associative array data structure has an internal tree. This tree is
constructed of two types of metadata blocks: nodes and shortcuts.
A node is an array of slots. Each slot can contain one of four things:
(*) A NULL pointer, indicating that the slot is empty.
(*) A pointer to an object (a leaf).
(*) A pointer to a node at the next level.
(*) A pointer to a shortcut.
BASIC INTERNAL TREE LAYOUT
--------------------------
Ignoring shortcuts for the moment, the nodes form a multilevel tree. The index
key space is strictly subdivided by the nodes in the tree and nodes occur on
fixed levels. For example:
Level: 0 1 2 3
=============== =============== =============== ===============
NODE D
NODE B NODE C +------>+---+
+------>+---+ +------>+---+ | | 0 |
NODE A | | 0 | | | 0 | | +---+
+---+ | +---+ | +---+ | : :
| 0 | | : : | : : | +---+
+---+ | +---+ | +---+ | | f |
| 1 |---+ | 3 |---+ | 7 |---+ +---+
+---+ +---+ +---+
: : : : | 8 |---+
+---+ +---+ +---+ | NODE E
| e |---+ | f | : : +------>+---+
+---+ | +---+ +---+ | 0 |
| f | | | f | +---+
+---+ | +---+ : :
| NODE F +---+
+------>+---+ | f |
| 0 | NODE G +---+
+---+ +------>+---+
: : | | 0 |
+---+ | +---+
| 6 |---+ : :
+---+ +---+
: : | f |
+---+ +---+
| f |
+---+
In the above example, there are 7 nodes (A-G), each with 16 slots (0-f).
Assuming no other meta data nodes in the tree, the key space is divided thusly:
KEY PREFIX NODE
========== ====
137* D
138* E
13[0-69-f]* C
1[0-24-f]* B
e6* G
e[0-57-f]* F
[02-df]* A
So, for instance, keys with the following example index keys will be found in
the appropriate nodes:
INDEX KEY PREFIX NODE
=============== ======= ====
13694892892489 13 C
13795289025897 137 D
13889dde88793 138 E
138bbb89003093 138 E
1394879524789 12 C
1458952489 1 B
9431809de993ba - A
b4542910809cd - A
e5284310def98 e F
e68428974237 e6 G
e7fffcbd443 e F
f3842239082 - A
To save memory, if a node can hold all the leaves in its portion of keyspace,
then the node will have all those leaves in it and will not have any metadata
pointers - even if some of those leaves would like to be in the same slot.
A node can contain a heterogeneous mix of leaves and metadata pointers.
Metadata pointers must be in the slots that match their subdivisions of key
space. The leaves can be in any slot not occupied by a metadata pointer. It
is guaranteed that none of the leaves in a node will match a slot occupied by a
metadata pointer. If the metadata pointer is there, any leaf whose key matches
the metadata key prefix must be in the subtree that the metadata pointer points
to.
In the above example list of index keys, node A will contain:
SLOT CONTENT INDEX KEY (PREFIX)
==== =============== ==================
1 PTR TO NODE B 1*
any LEAF 9431809de993ba
any LEAF b4542910809cd
e PTR TO NODE F e*
any LEAF f3842239082
and node B:
3 PTR TO NODE C 13*
any LEAF 1458952489
SHORTCUTS
---------
Shortcuts are metadata records that jump over a piece of keyspace. A shortcut
is a replacement for a series of single-occupancy nodes ascending through the
levels. Shortcuts exist to save memory and to speed up traversal.
It is possible for the root of the tree to be a shortcut - say, for example,
the tree contains at least 17 nodes all with key prefix '1111'. The insertion
algorithm will insert a shortcut to skip over the '1111' keyspace in a single
bound and get to the fourth level where these actually become different.
SPLITTING AND COLLAPSING NODES
------------------------------
Each node has a maximum capacity of 16 leaves and metadata pointers. If the
insertion algorithm finds that it is trying to insert a 17th object into a
node, that node will be split such that at least two leaves that have a common
key segment at that level end up in a separate node rooted on that slot for
that common key segment.
If the leaves in a full node and the leaf that is being inserted are
sufficiently similar, then a shortcut will be inserted into the tree.
When the number of objects in the subtree rooted at a node falls to 16 or
fewer, then the subtree will be collapsed down to a single node - and this will
ripple towards the root if possible.
NON-RECURSIVE ITERATION
-----------------------
Each node and shortcut contains a back pointer to its parent and the number of
slot in that parent that points to it. None-recursive iteration uses these to
proceed rootwards through the tree, going to the parent node, slot N + 1 to
make sure progress is made without the need for a stack.
The backpointers, however, make simultaneous alteration and iteration tricky.
SIMULTANEOUS ALTERATION AND ITERATION
-------------------------------------
There are a number of cases to consider:
(1) Simple insert/replace. This involves simply replacing a NULL or old
matching leaf pointer with the pointer to the new leaf after a barrier.
The metadata blocks don't change otherwise. An old leaf won't be freed
until after the RCU grace period.
(2) Simple delete. This involves just clearing an old matching leaf. The
metadata blocks don't change otherwise. The old leaf won't be freed until
after the RCU grace period.
(3) Insertion replacing part of a subtree that we haven't yet entered. This
may involve replacement of part of that subtree - but that won't affect
the iteration as we won't have reached the pointer to it yet and the
ancestry blocks are not replaced (the layout of those does not change).
(4) Insertion replacing nodes that we're actively processing. This isn't a
problem as we've passed the anchoring pointer and won't switch onto the
new layout until we follow the back pointers - at which point we've
already examined the leaves in the replaced node (we iterate over all the
leaves in a node before following any of its metadata pointers).
We might, however, re-see some leaves that have been split out into a new
branch that's in a slot further along than we were at.
(5) Insertion replacing nodes that we're processing a dependent branch of.
This won't affect us until we follow the back pointers. Similar to (4).
(6) Deletion collapsing a branch under us. This doesn't affect us because the
back pointers will get us back to the parent of the new node before we
could see the new node. The entire collapsed subtree is thrown away
unchanged - and will still be rooted on the same slot, so we shouldn't
process it a second time as we'll go back to slot + 1.
Note:
(*) Under some circumstances, we need to simultaneously change the parent
pointer and the parent slot pointer on a node (say, for example, we
inserted another node before it and moved it up a level). We cannot do
this without locking against a read - so we have to replace that node too.
However, when we're changing a shortcut into a node this isn't a problem
as shortcuts only have one slot and so the parent slot number isn't used
when traversing backwards over one. This means that it's okay to change
the slot number first - provided suitable barriers are used to make sure
the parent slot number is read after the back pointer.
Obsolete blocks and leaves are freed up after an RCU grace period has passed,
so as long as anyone doing walking or iteration holds the RCU read lock, the
old superstructure should not go away on them.

View file

@ -0,0 +1,92 @@
/* Generic associative array implementation.
*
* See Documentation/assoc_array.txt for information.
*
* Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#ifndef _LINUX_ASSOC_ARRAY_H
#define _LINUX_ASSOC_ARRAY_H
#ifdef CONFIG_ASSOCIATIVE_ARRAY
#include <linux/types.h>
#define ASSOC_ARRAY_KEY_CHUNK_SIZE BITS_PER_LONG /* Key data retrieved in chunks of this size */
/*
* Generic associative array.
*/
struct assoc_array {
struct assoc_array_ptr *root; /* The node at the root of the tree */
unsigned long nr_leaves_on_tree;
};
/*
* Operations on objects and index keys for use by array manipulation routines.
*/
struct assoc_array_ops {
/* Method to get a chunk of an index key from caller-supplied data */
unsigned long (*get_key_chunk)(const void *index_key, int level);
/* Method to get a piece of an object's index key */
unsigned long (*get_object_key_chunk)(const void *object, int level);
/* Is this the object we're looking for? */
bool (*compare_object)(const void *object, const void *index_key);
/* How different are two objects, to a bit position in their keys? (or
* -1 if they're the same)
*/
int (*diff_objects)(const void *a, const void *b);
/* Method to free an object. */
void (*free_object)(void *object);
};
/*
* Access and manipulation functions.
*/
struct assoc_array_edit;
static inline void assoc_array_init(struct assoc_array *array)
{
array->root = NULL;
array->nr_leaves_on_tree = 0;
}
extern int assoc_array_iterate(const struct assoc_array *array,
int (*iterator)(const void *object,
void *iterator_data),
void *iterator_data);
extern void *assoc_array_find(const struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key);
extern void assoc_array_destroy(struct assoc_array *array,
const struct assoc_array_ops *ops);
extern struct assoc_array_edit *assoc_array_insert(struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key,
void *object);
extern void assoc_array_insert_set_object(struct assoc_array_edit *edit,
void *object);
extern struct assoc_array_edit *assoc_array_delete(struct assoc_array *array,
const struct assoc_array_ops *ops,
const void *index_key);
extern struct assoc_array_edit *assoc_array_clear(struct assoc_array *array,
const struct assoc_array_ops *ops);
extern void assoc_array_apply_edit(struct assoc_array_edit *edit);
extern void assoc_array_cancel_edit(struct assoc_array_edit *edit);
extern int assoc_array_gc(struct assoc_array *array,
const struct assoc_array_ops *ops,
bool (*iterator)(void *object, void *iterator_data),
void *iterator_data);
#endif /* CONFIG_ASSOCIATIVE_ARRAY */
#endif /* _LINUX_ASSOC_ARRAY_H */

View file

@ -0,0 +1,182 @@
/* Private definitions for the generic associative array implementation.
*
* See Documentation/assoc_array.txt for information.
*
* Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#ifndef _LINUX_ASSOC_ARRAY_PRIV_H
#define _LINUX_ASSOC_ARRAY_PRIV_H
#ifdef CONFIG_ASSOCIATIVE_ARRAY
#include <linux/assoc_array.h>
#define ASSOC_ARRAY_FAN_OUT 16 /* Number of slots per node */
#define ASSOC_ARRAY_FAN_MASK (ASSOC_ARRAY_FAN_OUT - 1)
#define ASSOC_ARRAY_LEVEL_STEP (ilog2(ASSOC_ARRAY_FAN_OUT))
#define ASSOC_ARRAY_LEVEL_STEP_MASK (ASSOC_ARRAY_LEVEL_STEP - 1)
#define ASSOC_ARRAY_KEY_CHUNK_MASK (ASSOC_ARRAY_KEY_CHUNK_SIZE - 1)
#define ASSOC_ARRAY_KEY_CHUNK_SHIFT (ilog2(BITS_PER_LONG))
/*
* Undefined type representing a pointer with type information in the bottom
* two bits.
*/
struct assoc_array_ptr;
/*
* An N-way node in the tree.
*
* Each slot contains one of four things:
*
* (1) Nothing (NULL).
*
* (2) A leaf object (pointer types 0).
*
* (3) A next-level node (pointer type 1, subtype 0).
*
* (4) A shortcut (pointer type 1, subtype 1).
*
* The tree is optimised for search-by-ID, but permits reasonable iteration
* also.
*
* The tree is navigated by constructing an index key consisting of an array of
* segments, where each segment is ilog2(ASSOC_ARRAY_FAN_OUT) bits in size.
*
* The segments correspond to levels of the tree (the first segment is used at
* level 0, the second at level 1, etc.).
*/
struct assoc_array_node {
struct assoc_array_ptr *back_pointer;
u8 parent_slot;
struct assoc_array_ptr *slots[ASSOC_ARRAY_FAN_OUT];
unsigned long nr_leaves_on_branch;
};
/*
* A shortcut through the index space out to where a collection of nodes/leaves
* with the same IDs live.
*/
struct assoc_array_shortcut {
struct assoc_array_ptr *back_pointer;
int parent_slot;
int skip_to_level;
struct assoc_array_ptr *next_node;
unsigned long index_key[];
};
/*
* Preallocation cache.
*/
struct assoc_array_edit {
struct rcu_head rcu;
struct assoc_array *array;
const struct assoc_array_ops *ops;
const struct assoc_array_ops *ops_for_excised_subtree;
struct assoc_array_ptr *leaf;
struct assoc_array_ptr **leaf_p;
struct assoc_array_ptr *dead_leaf;
struct assoc_array_ptr *new_meta[3];
struct assoc_array_ptr *excised_meta[1];
struct assoc_array_ptr *excised_subtree;
struct assoc_array_ptr **set_backpointers[ASSOC_ARRAY_FAN_OUT];
struct assoc_array_ptr *set_backpointers_to;
struct assoc_array_node *adjust_count_on;
long adjust_count_by;
struct {
struct assoc_array_ptr **ptr;
struct assoc_array_ptr *to;
} set[2];
struct {
u8 *p;
u8 to;
} set_parent_slot[1];
u8 segment_cache[ASSOC_ARRAY_FAN_OUT + 1];
};
/*
* Internal tree member pointers are marked in the bottom one or two bits to
* indicate what type they are so that we don't have to look behind every
* pointer to see what it points to.
*
* We provide functions to test type annotations and to create and translate
* the annotated pointers.
*/
#define ASSOC_ARRAY_PTR_TYPE_MASK 0x1UL
#define ASSOC_ARRAY_PTR_LEAF_TYPE 0x0UL /* Points to leaf (or nowhere) */
#define ASSOC_ARRAY_PTR_META_TYPE 0x1UL /* Points to node or shortcut */
#define ASSOC_ARRAY_PTR_SUBTYPE_MASK 0x2UL
#define ASSOC_ARRAY_PTR_NODE_SUBTYPE 0x0UL
#define ASSOC_ARRAY_PTR_SHORTCUT_SUBTYPE 0x2UL
static inline bool assoc_array_ptr_is_meta(const struct assoc_array_ptr *x)
{
return (unsigned long)x & ASSOC_ARRAY_PTR_TYPE_MASK;
}
static inline bool assoc_array_ptr_is_leaf(const struct assoc_array_ptr *x)
{
return !assoc_array_ptr_is_meta(x);
}
static inline bool assoc_array_ptr_is_shortcut(const struct assoc_array_ptr *x)
{
return (unsigned long)x & ASSOC_ARRAY_PTR_SUBTYPE_MASK;
}
static inline bool assoc_array_ptr_is_node(const struct assoc_array_ptr *x)
{
return !assoc_array_ptr_is_shortcut(x);
}
static inline void *assoc_array_ptr_to_leaf(const struct assoc_array_ptr *x)
{
return (void *)((unsigned long)x & ~ASSOC_ARRAY_PTR_TYPE_MASK);
}
static inline
unsigned long __assoc_array_ptr_to_meta(const struct assoc_array_ptr *x)
{
return (unsigned long)x &
~(ASSOC_ARRAY_PTR_SUBTYPE_MASK | ASSOC_ARRAY_PTR_TYPE_MASK);
}
static inline
struct assoc_array_node *assoc_array_ptr_to_node(const struct assoc_array_ptr *x)
{
return (struct assoc_array_node *)__assoc_array_ptr_to_meta(x);
}
static inline
struct assoc_array_shortcut *assoc_array_ptr_to_shortcut(const struct assoc_array_ptr *x)
{
return (struct assoc_array_shortcut *)__assoc_array_ptr_to_meta(x);
}
static inline
struct assoc_array_ptr *__assoc_array_x_to_ptr(const void *p, unsigned long t)
{
return (struct assoc_array_ptr *)((unsigned long)p | t);
}
static inline
struct assoc_array_ptr *assoc_array_leaf_to_ptr(const void *p)
{
return __assoc_array_x_to_ptr(p, ASSOC_ARRAY_PTR_LEAF_TYPE);
}
static inline
struct assoc_array_ptr *assoc_array_node_to_ptr(const struct assoc_array_node *p)
{
return __assoc_array_x_to_ptr(
p, ASSOC_ARRAY_PTR_META_TYPE | ASSOC_ARRAY_PTR_NODE_SUBTYPE);
}
static inline
struct assoc_array_ptr *assoc_array_shortcut_to_ptr(const struct assoc_array_shortcut *p)
{
return __assoc_array_x_to_ptr(
p, ASSOC_ARRAY_PTR_META_TYPE | ASSOC_ARRAY_PTR_SHORTCUT_SUBTYPE);
}
#endif /* CONFIG_ASSOCIATIVE_ARRAY */
#endif /* _LINUX_ASSOC_ARRAY_PRIV_H */

View file

@ -322,6 +322,20 @@ config TEXTSEARCH_FSM
config BTREE
boolean
config ASSOCIATIVE_ARRAY
bool
help
Generic associative array. Can be searched and iterated over whilst
it is being modified. It is also reasonably quick to search and
modify. The algorithms are non-recursive, and the trees are highly
capacious.
See:
Documentation/assoc_array.txt
for more information.
config HAS_IOMEM
boolean
depends on !NO_IOMEM

View file

@ -51,6 +51,7 @@ CFLAGS_hweight.o = $(subst $(quote),,$(CONFIG_ARCH_HWEIGHT_CFLAGS))
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_BTREE) += btree.o
obj-$(CONFIG_ASSOCIATIVE_ARRAY) += assoc_array.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
obj-$(CONFIG_DEBUG_LIST) += list_debug.o
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o

1745
lib/assoc_array.c Normal file

File diff suppressed because it is too large Load diff