From 329ca3eed4a9a161515a8714be6ba182321385c7 Mon Sep 17 00:00:00 2001 From: Alexander Dahl Date: Wed, 18 Sep 2024 10:27:43 +0200 Subject: [PATCH] spi: atmel-quadspi: Avoid overwriting delay register settings Previously the MR and SCR registers were just set with the supposedly required values, from cached register values (cached reg content initialized to zero). All parts fixed here did not consider the current register (cache) content, which would make future support of cs_setup, cs_hold, and cs_inactive impossible. Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over the current setting, without resetting the bits first. All writes to MR did not consider possible settings of DLYCS and DLYBCT. Signed-off-by: Alexander Dahl Fixes: f732646d0ccd ("spi: atmel-quadspi: Add support for configuring CS timing") Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com Signed-off-by: Mark Brown --- drivers/spi/atmel-quadspi.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index 9b7aeef6ce99..4f288f07e38f 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -375,9 +375,9 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq, * If the QSPI controller is set in regular SPI mode, set it in * Serial Memory Mode (SMM). */ - if (aq->mr != QSPI_MR_SMM) { - atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR); - aq->mr = QSPI_MR_SMM; + if (!(aq->mr & QSPI_MR_SMM)) { + aq->mr |= QSPI_MR_SMM; + atmel_qspi_write(aq->scr, aq, QSPI_MR); } /* Clear pending interrupts */ @@ -501,7 +501,8 @@ static int atmel_qspi_setup(struct spi_device *spi) if (ret < 0) return ret; - aq->scr = QSPI_SCR_SCBR(scbr); + aq->scr &= ~QSPI_SCR_SCBR_MASK; + aq->scr |= QSPI_SCR_SCBR(scbr); atmel_qspi_write(aq->scr, aq, QSPI_SCR); pm_runtime_mark_last_busy(ctrl->dev.parent); @@ -534,6 +535,7 @@ static int atmel_qspi_set_cs_timing(struct spi_device *spi) if (ret < 0) return ret; + aq->scr &= ~QSPI_SCR_DLYBS_MASK; aq->scr |= QSPI_SCR_DLYBS(cs_setup); atmel_qspi_write(aq->scr, aq, QSPI_SCR); @@ -549,8 +551,8 @@ static void atmel_qspi_init(struct atmel_qspi *aq) atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR); /* Set the QSPI controller by default in Serial Memory Mode */ - atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR); - aq->mr = QSPI_MR_SMM; + aq->mr |= QSPI_MR_SMM; + atmel_qspi_write(aq->mr, aq, QSPI_MR); /* Enable the QSPI controller */ atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR);