powerpc updates for 5.3

Notable changes:
 
  - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well
    as some other functions only used by drivers that haven't (yet?) made it
    upstream.
 
  - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e
    mem: ...) which could lead to register corruption and kernel crashes.
 
  - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc
    when using the Radix MMU.
 
  - A large but incremental rewrite of our exception handling code to use gas
    macros rather than multiple levels of nested CPP macros.
 
 And the usual small fixes, cleanups and improvements.
 
 Thanks to:
   Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju
   T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater,
   Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig,
   Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R.
   Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg
   Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
   Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao,
   Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria,
   Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun
   Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung
   Bauermann, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdKVoLAAoJEFHr6jzI4aWA0kIP/A6shIbbE7H5W2hFrqt/PPPK
 3+VrvPKbOFF+W6hcE/RgSZmEnUo0svdNjHUd/eMfFS1vb/uRt2QDdrsHUNNwURQL
 M2mcLXFwYpnjSjb/XMgDbHpAQxjeGfTdYLonUIejN7Rk8KQUeLyKQ3SBn6kfMc46
 DnUUcPcjuRGaETUmVuZZ4e40ZWbJp8PKDrSJOuUrTPXMaK5ciNbZk5mCWXGbYl6G
 BMQAyv4ld/417rNTjBEP/T2foMJtioAt4W6mtlgdkOTdIEZnFU67nNxDBthNSu2c
 95+I+/sML4KOp1R4yhqLSLIDDbc3bg3c99hLGij0d948z3bkSZ8bwnPaUuy70C4v
 U8rvl/+N6C6H3DgSsPE/Gnkd8DnudqWY8nULc+8p3fXljGwww6/Qgt+6yCUn8BdW
 WgixkSjKgjDmzTw8trIUNEqORrTVle7cM2hIyIK2Q5T4kWzNQxrLZ/x/3wgoYjUa
 1KwIzaRo5JKZ9D3pJnJ5U+knE2/90rJIyfcp0W6ygyJsWKi2GNmq1eN3sKOw0IxH
 Tg86RENIA/rEMErNOfP45sLteMuTR7of7peCG3yumIOZqsDVYAzerpvtSgip2cvK
 aG+9HcYlBFOOOF9Dabi8GXsTBLXLfwiyjjLSpA9eXPwW8KObgiNfTZa7ujjTPvis
 4mk9oukFTFUpfhsMmI3T
 =3dBZ
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
     as well as some other functions only used by drivers that haven't
     (yet?) made it upstream.

   - A fix for a bug in our handling of hardware watchpoints (eg. perf
     record -e mem: ...) which could lead to register corruption and
     kernel crashes.

   - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
     vmalloc when using the Radix MMU.

   - A large but incremental rewrite of our exception handling code to
     use gas macros rather than multiple levels of nested CPP macros.

  And the usual small fixes, cleanups and improvements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
  Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
  Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
  Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
  Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
  Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
  Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
  Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
  Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
  Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
  Jitindar Singh, Thiago Jung Bauermann, YueHaibing"

* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
  powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
  powerpc/eeh: Handle hugepages in ioremap space
  ocxl: Update for AFU descriptor template version 1.1
  powerpc/boot: pass CONFIG options in a simpler and more robust way
  powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
  powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
  powerpc/module64: Use symbolic instructions names.
  powerpc/module32: Use symbolic instructions names.
  powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
  powerpc/module64: Fix comment in R_PPC64_ENTRY handling
  powerpc/boot: Add lzo support for uImage
  powerpc/boot: Add lzma support for uImage
  powerpc/boot: don't force gzipped uImage
  powerpc/8xx: Add microcode patch to move SMC parameter RAM.
  powerpc/8xx: Use IO accessors in microcode programming.
  powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
  powerpc/8xx: refactor programming of microcode CPM params.
  powerpc/8xx: refactor printing of microcode patch name.
  powerpc/8xx: Refactor microcode write
  powerpc/8xx: refactor writing of CPM microcode arrays
  ...
This commit is contained in:
Linus Torvalds 2019-07-13 16:08:36 -07:00
commit 192f0f8e9d
224 changed files with 3634 additions and 3534 deletions

View file

@ -2932,7 +2932,7 @@
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
nohugeiomap [KNL,x86] Disable kernel huge I/O mappings.
nohugeiomap [KNL,x86,PPC] Disable kernel huge I/O mappings.
nosmt [KNL,S390] Disable symmetric multithreading (SMT).
Equivalent to smt=1.
@ -5282,6 +5282,15 @@
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
xive= [PPC]
By default on POWER9 and above, the kernel will
natively use the XIVE interrupt controller. This option
allows the fallback firmware mode to be used:
off Fallback to firmware control of XIVE interrupt
controller on both pseries and powernv
platforms. Only useful on POWER9 and above.
xhci-hcd.quirks [USB,KNL]
A hex value specifying bitmask with supplemental xhci
host controller quirks. Meaning of each bit can be

View file

@ -0,0 +1,68 @@
VCPU Dispatch Statistics:
=========================
For Shared Processor LPARs, the POWER Hypervisor maintains a relatively
static mapping of the LPAR processors (vcpus) to physical processor
chips (representing the "home" node) and tries to always dispatch vcpus
on their associated physical processor chip. However, under certain
scenarios, vcpus may be dispatched on a different processor chip (away
from its home node).
/proc/powerpc/vcpudispatch_stats can be used to obtain statistics
related to the vcpu dispatch behavior. Writing '1' to this file enables
collecting the statistics, while writing '0' disables the statistics.
By default, the DTLB log for each vcpu is processed 50 times a second so
as not to miss any entries. This processing frequency can be changed
through /proc/powerpc/vcpudispatch_stats_freq.
The statistics themselves are available by reading the procfs file
/proc/powerpc/vcpudispatch_stats. Each line in the output corresponds to
a vcpu as represented by the first field, followed by 8 numbers.
The first number corresponds to:
1. total vcpu dispatches since the beginning of statistics collection
The next 4 numbers represent vcpu dispatch dispersions:
2. number of times this vcpu was dispatched on the same processor as last
time
3. number of times this vcpu was dispatched on a different processor core
as last time, but within the same chip
4. number of times this vcpu was dispatched on a different chip
5. number of times this vcpu was dispatches on a different socket/drawer
(next numa boundary)
The final 3 numbers represent statistics in relation to the home node of
the vcpu:
6. number of times this vcpu was dispatched in its home node (chip)
7. number of times this vcpu was dispatched in a different node
8. number of times this vcpu was dispatched in a node further away (numa
distance)
An example output:
$ sudo cat /proc/powerpc/vcpudispatch_stats
cpu0 6839 4126 2683 30 0 6821 18 0
cpu1 2515 1274 1229 12 0 2509 6 0
cpu2 2317 1198 1109 10 0 2312 5 0
cpu3 2259 1165 1088 6 0 2256 3 0
cpu4 2205 1143 1056 6 0 2202 3 0
cpu5 2165 1121 1038 6 0 2162 3 0
cpu6 2183 1127 1050 6 0 2180 3 0
cpu7 2193 1133 1052 8 0 2187 6 0
cpu8 2165 1115 1032 18 0 2156 9 0
cpu9 2301 1252 1033 16 0 2293 8 0
cpu10 2197 1138 1041 18 0 2187 10 0
cpu11 2273 1185 1062 26 0 2260 13 0
cpu12 2186 1125 1043 18 0 2177 9 0
cpu13 2161 1115 1030 16 0 2153 8 0
cpu14 2206 1153 1033 20 0 2196 10 0
cpu15 2163 1115 1032 16 0 2155 8 0
In the output above, for vcpu0, there have been 6839 dispatches since
statistics were enabled. 4126 of those dispatches were on the same
physical cpu as the last time. 2683 were on a different core, but within
the same chip, while 30 dispatches were on a different chip compared to
its last dispatch.
Also, out of the total of 6839 dispatches, we see that there have been
6821 dispatches on the vcpu's home node, while 18 dispatches were
outside its home node, on a neighbouring chip.

View file

@ -48,7 +48,7 @@ config ARCH_MMAP_RND_COMPAT_BITS_MAX
# Allow randomisation to consume up to 512MB of address space (2^29).
default 11 if PPC_256K_PAGES # 11 = 29 (512MB) - 18 (256K)
default 13 if PPC_64K_PAGES # 13 = 29 (512MB) - 16 (64K)
default 15 if PPC_16K_PAGES # 15 = 29 (512MB) - 14 (16K)
default 15 if PPC_16K_PAGES # 15 = 29 (512MB) - 14 (16K)
default 17 # 17 = 29 (512MB) - 12 (4K)
config ARCH_MMAP_RND_COMPAT_BITS_MIN
@ -168,6 +168,7 @@ config PPC
select GENERIC_STRNLEN_USER
select GENERIC_TIME_VSYSCALL
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_HUGE_VMAP if PPC_BOOK3S_64 && PPC_RADIX_MMU
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KASAN if PPC32
select HAVE_ARCH_KGDB
@ -176,6 +177,7 @@ config PPC
select HAVE_ARCH_NVRAM_OPS
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_C_RECORDMCOUNT
select HAVE_CBPF_JIT if !PPC64
select HAVE_STACKPROTECTOR if PPC64 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r13)
select HAVE_STACKPROTECTOR if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
@ -197,6 +199,8 @@ config PPC
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZMA if DEFAULT_UIMAGE
select HAVE_KERNEL_LZO if DEFAULT_UIMAGE
select HAVE_KERNEL_XZ if PPC_BOOK3S || 44x
select HAVE_KPROBES
select HAVE_KPROBES_ON_FTRACE
@ -235,6 +239,7 @@ config PPC
select OLD_SIGSUSPEND
select PCI_DOMAINS if PCI
select PCI_SYSCALL if PCI
select PPC_DAWR if PPC64
select RTC_LIB
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
@ -245,9 +250,9 @@ config PPC
#
config PPC_BARRIER_NOSPEC
bool
default y
depends on PPC_BOOK3S_64 || PPC_FSL_BOOK3E
bool
default y
depends on PPC_BOOK3S_64 || PPC_FSL_BOOK3E
config EARLY_PRINTK
bool
@ -371,6 +376,9 @@ config PPC_ADV_DEBUG_DAC_RANGE
depends on PPC_ADV_DEBUG_REGS && 44x
default y
config PPC_DAWR
bool
config ZONE_DMA
bool
default y if PPC_BOOK3E_64
@ -399,7 +407,7 @@ config HUGETLB_PAGE_SIZE_VARIABLE
config MATH_EMULATION
bool "Math emulation"
depends on 4xx || PPC_8xx || PPC_MPC832x || BOOKE
---help---
help
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
floating-point instructions in the PowerPC instruction set. If you
@ -418,27 +426,27 @@ choice
config MATH_EMULATION_FULL
bool "Emulate all the floating point instructions"
---help---
help
Select this option will enable the kernel to support to emulate
all the floating point instructions. If your SoC doesn't have
a FPU, you should select this.
config MATH_EMULATION_HW_UNIMPLEMENTED
bool "Just emulate the FPU unimplemented instructions"
---help---
help
Select this if you know there does have a hardware FPU on your
SoC, but some floating point instructions are not implemented by that.
endchoice
config PPC_TRANSACTIONAL_MEM
bool "Transactional Memory support for POWERPC"
depends on PPC_BOOK3S_64
depends on SMP
select ALTIVEC
select VSX
---help---
Support user-mode Transactional Memory on POWERPC.
bool "Transactional Memory support for POWERPC"
depends on PPC_BOOK3S_64
depends on SMP
select ALTIVEC
select VSX
help
Support user-mode Transactional Memory on POWERPC.
config LD_HEAD_STUB_CATCH
bool "Reserve 256 bytes to cope with linker stubs in HEAD text" if EXPERT
@ -458,7 +466,7 @@ config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && (PPC_PSERIES || \
PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
---help---
help
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
@ -826,7 +834,7 @@ config PPC_DENORMALISATION
bool "PowerPC denormalisation exception handling"
depends on PPC_BOOK3S_64
default "y" if PPC_POWERNV
---help---
help
Add support for handling denormalisation of single precision
values. Useful for bare metal only. If unsure say Y here.
@ -939,7 +947,7 @@ config FSL_SOC
bool
config FSL_PCI
bool
bool
select ARCH_HAS_DMA_SET_MASK
select PPC_INDIRECT_PCI
select PCI_QUIRKS
@ -987,7 +995,7 @@ config FSL_RIO
bool "Freescale Embedded SRIO Controller support"
depends on RAPIDIO = y && HAVE_RAPIDIO
default "n"
---help---
help
Include support for RapidIO controller on Freescale embedded
processors (MPC8548, MPC8641, etc).
@ -1051,14 +1059,14 @@ config DYNAMIC_MEMSTART
select NONSTATIC_KERNEL
help
This option enables the kernel to be loaded at any page aligned
physical address. The kernel creates a mapping from KERNELBASE to
physical address. The kernel creates a mapping from KERNELBASE to
the address where the kernel is loaded. The page size here implies
the TLB page size of the mapping for kernel on the particular platform.
Please refer to the init code for finding the TLB page size.
DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
kernel image, where the only restriction is the page aligned kernel
load address. When this option is enabled, the compile time physical
load address. When this option is enabled, the compile time physical
address CONFIG_PHYSICAL_START is ignored.
This option is overridden by CONFIG_RELOCATABLE

View file

@ -44,5 +44,3 @@ fdt_sw.c
fdt_wip.c
libfdt.h
libfdt_internal.h
autoconf.h

View file

@ -20,9 +20,6 @@
all: $(obj)/zImage
compress-$(CONFIG_KERNEL_GZIP) := CONFIG_KERNEL_GZIP
compress-$(CONFIG_KERNEL_XZ) := CONFIG_KERNEL_XZ
ifdef CROSS32_COMPILE
BOOTCC := $(CROSS32_COMPILE)gcc
BOOTAR := $(CROSS32_COMPILE)ar
@ -34,7 +31,7 @@ endif
BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \
-pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-D$(compress-y)
$(LINUXINCLUDE)
ifdef CONFIG_PPC64_BOOT_WRAPPER
BOOTCFLAGS += -m64
@ -51,7 +48,7 @@ BOOTCFLAGS += -mlittle-endian
BOOTCFLAGS += $(call cc-option,-mabi=elfv2)
endif
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc
BOOTARFLAGS := -cr$(KBUILD_ARFLAGS)
@ -202,14 +199,9 @@ $(obj)/empty.c:
$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
$(Q)cp $< $@
$(srctree)/$(src)/serial.c: $(obj)/autoconf.h
$(obj)/autoconf.h: $(obj)/%: $(objtree)/include/generated/%
$(Q)cp $< $@
clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
$(zlib-decomp-) $(libfdt) $(libfdtheader) \
autoconf.h empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
@ -257,6 +249,8 @@ endif
compressor-$(CONFIG_KERNEL_GZIP) := gz
compressor-$(CONFIG_KERNEL_XZ) := xz
compressor-$(CONFIG_KERNEL_LZMA) := lzma
compressor-$(CONFIG_KERNEL_LZO) := lzo
# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
quiet_cmd_wrap = WRAP $@

View file

@ -18,7 +18,6 @@
#include "stdio.h"
#include "io.h"
#include "ops.h"
#include "autoconf.h"
static int serial_open(void)
{

View file

@ -40,6 +40,7 @@ dts=
cacheit=
binary=
compression=.gz
uboot_comp=gzip
pie=
format=
@ -130,22 +131,29 @@ while [ "$#" -gt 0 ]; do
;;
-z)
compression=.gz
uboot_comp=gzip
;;
-Z)
shift
[ "$#" -gt 0 ] || usage
[ "$1" != "gz" -o "$1" != "xz" -o "$1" != "none" ] || usage
[ "$1" != "gz" -o "$1" != "xz" -o "$1" != "lzma" -o "$1" != "lzo" -o "$1" != "none" ] || usage
compression=".$1"
uboot_comp=$1
if [ $compression = ".none" ]; then
compression=
uboot_comp=none
fi
if [ $uboot_comp = "gz" ]; then
uboot_comp=gzip
fi
;;
--no-gzip)
# a "feature" of the the wrapper script is that it can be used outside
# the kernel tree. So keeping this around for backwards compatibility.
compression=
uboot_comp=none
;;
-?)
usage
@ -365,9 +373,16 @@ if [ -z "$cacheit" -o ! -f "$vmz$compression" -o "$vmz$compression" -ot "$kernel
.gz)
gzip -n -f -9 "$vmz.$$"
;;
.lzma)
xz --format=lzma -f -6 "$vmz.$$"
;;
.lzo)
lzop -f -9 "$vmz.$$"
;;
*)
# drop the compression suffix so the stripped vmlinux is used
compression=
uboot_comp=none
;;
esac
@ -411,7 +426,7 @@ membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
case "$platform" in
uboot)
rm -f "$ofile"
${MKIMAGE} -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
${MKIMAGE} -A ppc -O linux -T kernel -C $uboot_comp -a $membase -e $membase \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"

View file

@ -20,10 +20,30 @@ static inline uint32_t swab32p(void *p)
#ifdef __LITTLE_ENDIAN__
#define get_le32(p) (*((uint32_t *) (p)))
#define cpu_to_be32(x) swab32(x)
static inline u32 be32_to_cpup(const u32 *p)
{
return swab32p((u32 *)p);
}
#else
#define get_le32(p) swab32p(p)
#define cpu_to_be32(x) (x)
static inline u32 be32_to_cpup(const u32 *p)
{
return *p;
}
#endif
static inline uint32_t get_unaligned_be32(const void *p)
{
return be32_to_cpup(p);
}
static inline void put_unaligned_be32(u32 val, void *p)
{
*((u32 *)p) = cpu_to_be32(val);
}
#define memeq(a, b, size) (memcmp(a, b, size) == 0)
#define memzero(buf, size) memset(buf, 0, size)

View file

@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -14,7 +14,6 @@ CONFIG_APM8018X=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_MATH_EMULATION=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000
CONFIG_SCSI=y

View file

@ -21,7 +21,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -31,7 +31,6 @@ CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_MANGLE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192

View file

@ -19,7 +19,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -33,7 +33,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_CONNECTOR=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=35000

View file

@ -20,7 +20,6 @@ CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -31,7 +31,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_CONNECTOR=y

View file

@ -20,7 +20,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -44,7 +44,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_VLAN_8021Q=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_CONNECTOR=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -33,7 +33,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -23,7 +23,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -27,7 +27,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -30,7 +30,6 @@ CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_MANGLE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192

View file

@ -26,7 +26,6 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_VLAN_8021Q=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -23,7 +23,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -26,7 +26,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -23,7 +23,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -36,7 +36,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -27,7 +27,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -27,7 +27,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -26,7 +26,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -27,7 +27,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CFI=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CFI=y

View file

@ -26,7 +26,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -26,7 +26,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -65,7 +65,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y

View file

@ -23,7 +23,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -23,7 +23,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -22,7 +22,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -22,7 +22,6 @@ CONFIG_NETFILTER=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_NET_PKTGEN=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m

View file

@ -29,7 +29,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CFI=y

View file

@ -54,7 +54,6 @@ CONFIG_IP_PIMSM_V2=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -26,7 +26,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -37,7 +37,6 @@ CONFIG_NETFILTER=y
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y

View file

@ -102,7 +102,6 @@ CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072

View file

@ -38,7 +38,6 @@ CONFIG_NETFILTER=y
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -28,7 +28,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -118,7 +118,6 @@ CONFIG_SYSVIPC=y
CONFIG_TMPFS=y
CONFIG_UBIFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_UFS_FS=m
CONFIG_UIO=y
CONFIG_UNIX=y

View file

@ -52,7 +52,6 @@ CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_LOOP=y
@ -244,7 +243,6 @@ CONFIG_CRC_T10DIF=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_BOOTX_TEXT=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_PCBC=m

View file

@ -35,7 +35,6 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
@ -91,7 +90,6 @@ CONFIG_CRC_CCITT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
CONFIG_DMA_API_DEBUG=y
CONFIG_PPC_EARLY_DEBUG=y

View file

@ -27,7 +27,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -48,7 +48,6 @@ CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y

View file

@ -36,7 +36,6 @@ CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_SCSI_PROC_FS is not set
@ -104,7 +103,6 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_LATENCYTOP=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_BOOTX_TEXT=y

View file

@ -30,7 +30,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_TIPC=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -35,7 +35,6 @@ CONFIG_CAN_VCAN=y
CONFIG_CAN_MSCAN=y
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

View file

@ -27,7 +27,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y

View file

@ -23,7 +23,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -37,7 +37,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_ESP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set

View file

@ -27,7 +27,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -58,7 +58,6 @@ CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_LAPB=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2

View file

@ -44,7 +44,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y

View file

@ -112,7 +112,6 @@ CONFIG_BT_HCIBFUSB=m
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_CONNECTOR=y
CONFIG_MAC_FLOPPY=m
@ -293,7 +292,6 @@ CONFIG_CRC_T10DIF=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_LATENCYTOP=y
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_BOOTX_TEXT=y

View file

@ -98,7 +98,6 @@ CONFIG_NET_ACT_BPF=m
CONFIG_DNS_RESOLVER=y
CONFIG_BPF_JIT=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
@ -317,7 +316,6 @@ CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_LATENCYTOP=y
CONFIG_FUNCTION_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y

View file

@ -25,7 +25,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -36,7 +36,6 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_BRIDGE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -89,7 +89,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
CONFIG_IPV6=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
@ -98,7 +98,6 @@ CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_BPF=m
CONFIG_BPF_JIT=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_FD=y
@ -367,7 +366,6 @@ CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_FUNCTION_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y

View file

@ -50,7 +50,6 @@ CONFIG_INET_IPCOMP=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_FD=y
@ -223,7 +222,6 @@ CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y

View file

@ -345,7 +345,6 @@ CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEBUG_DEVRES=y
CONFIG_CONNECTOR=y
CONFIG_PARPORT=m
@ -1148,7 +1147,6 @@ CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y

View file

@ -24,7 +24,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
CONFIG_NETFILTER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y

View file

@ -63,7 +63,6 @@ CONFIG_CFG80211=m
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65535

View file

@ -83,7 +83,6 @@ CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_BPF=m
CONFIG_BPF_JIT=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_PARPORT=m
@ -290,7 +289,6 @@ CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_LATENCYTOP=y
CONFIG_FUNCTION_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y

View file

@ -68,7 +68,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=m

View file

@ -26,7 +26,6 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y

View file

@ -32,7 +32,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y

View file

@ -41,7 +41,6 @@ CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_HIDP=y
CONFIG_CFG80211=y
CONFIG_MAC80211=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
@ -123,7 +122,6 @@ CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DMA_API_DEBUG=y

View file

@ -116,8 +116,6 @@ typedef struct {
/* Number of users of the external (Nest) MMU */
atomic_t copros;
/* NPU NMMU context */
struct npu_context *npu_context;
struct hash_mm_context *hash_context;
unsigned long vdso_base;

View file

@ -274,8 +274,15 @@ extern unsigned long __vmalloc_end;
#define VMALLOC_START __vmalloc_start
#define VMALLOC_END __vmalloc_end
static inline unsigned int ioremap_max_order(void)
{
if (radix_enabled())
return PUD_SHIFT;
return 7 + PAGE_SHIFT; /* default from linux/vmalloc.h */
}
#define IOREMAP_MAX_ORDER ioremap_max_order()
extern unsigned long __kernel_virt_start;
extern unsigned long __kernel_virt_size;
extern unsigned long __kernel_io_start;
extern unsigned long __kernel_io_end;
#define KERN_VIRT_START __kernel_virt_start
@ -1343,5 +1350,26 @@ static inline bool is_pte_rw_upgrade(unsigned long old_val, unsigned long new_va
return false;
}
/*
* Like pmd_huge() and pmd_large(), but works regardless of config options
*/
#define pmd_is_leaf pmd_is_leaf
static inline bool pmd_is_leaf(pmd_t pmd)
{
return !!(pmd_raw(pmd) & cpu_to_be64(_PAGE_PTE));
}
#define pud_is_leaf pud_is_leaf
static inline bool pud_is_leaf(pud_t pud)
{
return !!(pud_raw(pud) & cpu_to_be64(_PAGE_PTE));
}
#define pgd_is_leaf pgd_is_leaf
static inline bool pgd_is_leaf(pgd_t pgd)
{
return !!(pgd_raw(pgd) & cpu_to_be64(_PAGE_PTE));
}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */

View file

@ -266,6 +266,9 @@ extern void radix__vmemmap_remove_mapping(unsigned long start,
extern int radix__map_kernel_page(unsigned long ea, unsigned long pa,
pgprot_t flags, unsigned int psz);
extern int radix__ioremap_range(unsigned long ea, phys_addr_t pa,
unsigned long size, pgprot_t prot, int nid);
static inline unsigned long radix__get_tree_size(void)
{
unsigned long rts_field;

View file

@ -33,7 +33,8 @@
#define IFETCH_ALIGN_BYTES (1 << IFETCH_ALIGN_SHIFT)
#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
#if !defined(__ASSEMBLY__)
#ifdef CONFIG_PPC64
struct ppc_cache_info {
u32 size;
@ -53,7 +54,28 @@ struct ppc64_caches {
};
extern struct ppc64_caches ppc64_caches;
#endif /* __powerpc64__ && ! __ASSEMBLY__ */
static inline u32 l1_cache_shift(void)
{
return ppc64_caches.l1d.log_block_size;
}
static inline u32 l1_cache_bytes(void)
{
return ppc64_caches.l1d.block_size;
}
#else
static inline u32 l1_cache_shift(void)
{
return L1_CACHE_SHIFT;
}
static inline u32 l1_cache_bytes(void)
{
return L1_CACHE_BYTES;
}
#endif
#endif /* ! __ASSEMBLY__ */
#if defined(__ASSEMBLY__)
/*
@ -85,22 +107,22 @@ extern void _set_L3CR(unsigned long);
static inline void dcbz(void *addr)
{
__asm__ __volatile__ ("dcbz 0, %0" : : "r"(addr) : "memory");
__asm__ __volatile__ ("dcbz %y0" : : "Z"(*(u8 *)addr) : "memory");
}
static inline void dcbi(void *addr)
{
__asm__ __volatile__ ("dcbi 0, %0" : : "r"(addr) : "memory");
__asm__ __volatile__ ("dcbi %y0" : : "Z"(*(u8 *)addr) : "memory");
}
static inline void dcbf(void *addr)
{
__asm__ __volatile__ ("dcbf 0, %0" : : "r"(addr) : "memory");
__asm__ __volatile__ ("dcbf %y0" : : "Z"(*(u8 *)addr) : "memory");
}
static inline void dcbst(void *addr)
{
__asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory");
__asm__ __volatile__ ("dcbst %y0" : : "Z"(*(u8 *)addr) : "memory");
}
#endif /* !__ASSEMBLY__ */
#endif /* __KERNEL__ */

Some files were not shown because too many files have changed in this diff Show more