epca: coding style

Clean up the epca driver

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Alan Cox 2008-04-30 00:54:16 -07:00 committed by Linus Torvalds
parent 9492e13516
commit 191260a012

View file

@ -38,8 +38,8 @@
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include "digiPCI.h"
@ -73,7 +73,8 @@ static int invalid_lilo_config;
*/
static DEFINE_SPINLOCK(epca_lock);
/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted to 7 below. */
/* MAXBOARDS is typically 12, but ISA and EISA cards are restricted
to 7 below. */
static struct board_info boards[MAXBOARDS];
static struct tty_driver *pc_driver;
@ -162,7 +163,7 @@ static int pc_chars_in_buffer(struct tty_struct *);
static void pc_flush_buffer(struct tty_struct *);
static void pc_flush_chars(struct tty_struct *);
static int block_til_ready(struct tty_struct *, struct file *,
struct channel *);
struct channel *);
static int pc_open(struct tty_struct *, struct file *);
static void post_fep_init(unsigned int crd);
static void epcapoll(unsigned long);
@ -174,18 +175,18 @@ static unsigned termios2digi_c(struct channel *ch, unsigned);
static void epcaparam(struct tty_struct *, struct channel *);
static void receive_data(struct channel *);
static int pc_ioctl(struct tty_struct *, struct file *,
unsigned int, unsigned long);
unsigned int, unsigned long);
static int info_ioctl(struct tty_struct *, struct file *,
unsigned int, unsigned long);
unsigned int, unsigned long);
static void pc_set_termios(struct tty_struct *, struct ktermios *);
static void do_softint(struct work_struct *work);
static void pc_stop(struct tty_struct *);
static void pc_start(struct tty_struct *);
static void pc_throttle(struct tty_struct * tty);
static void pc_throttle(struct tty_struct *tty);
static void pc_unthrottle(struct tty_struct *tty);
static void digi_send_break(struct channel *ch, int msec);
static void setup_empty_event(struct tty_struct *tty, struct channel *ch);
void epca_setup(char *, int *);
static void epca_setup(char *, int *);
static int pc_write(struct tty_struct *, const unsigned char *, int);
static int pc_init(void);
@ -242,7 +243,7 @@ static void assertmemoff(struct channel *ch)
/* PCXEM windowing is the same as that used in the PCXR and CX series cards. */
static void pcxem_memwinon(struct board_info *b, unsigned int win)
{
outb_p(FEPWIN|win, b->port + 1);
outb_p(FEPWIN | win, b->port + 1);
}
static void pcxem_memwinoff(struct board_info *b, unsigned int win)
@ -252,7 +253,7 @@ static void pcxem_memwinoff(struct board_info *b, unsigned int win)
static void pcxem_globalwinon(struct channel *ch)
{
outb_p( FEPWIN, (int)ch->board->port + 1);
outb_p(FEPWIN, (int)ch->board->port + 1);
}
static void pcxem_rxwinon(struct channel *ch)
@ -393,7 +394,7 @@ static struct channel *verifyChannel(struct tty_struct *tty)
*/
if (tty) {
struct channel *ch = (struct channel *)tty->driver_data;
if ((ch >= &digi_channels[0]) && (ch < &digi_channels[nbdevs])) {
if (ch >= &digi_channels[0] && ch < &digi_channels[nbdevs]) {
if (ch->magic == EPCA_MAGIC)
return ch;
}
@ -413,7 +414,7 @@ static void pc_sched_event(struct channel *ch, int event)
static void epca_error(int line, char *msg)
{
printk(KERN_ERR "epca_error (Digi): line = %d %s\n",line,msg);
printk(KERN_ERR "epca_error (Digi): line = %d %s\n", line, msg);
}
static void pc_close(struct tty_struct *tty, struct file *filp)
@ -424,7 +425,8 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
ch = verifyChannel(tty);
if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
if (tty_hung_up_p(filp)) {
spin_unlock_irqrestore(&epca_lock, flags);
@ -439,7 +441,6 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&epca_lock, flags);
return;
}
/* Port open only once go ahead with shutdown & reset */
BUG_ON(ch->count < 0);
@ -454,9 +455,11 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
spin_unlock_irqrestore(&epca_lock, flags);
if (ch->asyncflags & ASYNC_INITIALIZED) {
/* Setup an event to indicate when the transmit buffer empties */
/* Setup an event to indicate when the
transmit buffer empties */
setup_empty_event(tty, ch);
tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */
/* 30 seconds timeout */
tty_wait_until_sent(tty, 3000);
}
pc_flush_buffer(tty);
@ -475,7 +478,7 @@ static void pc_close(struct tty_struct *tty, struct file *filp)
wake_up_interruptible(&ch->open_wait);
}
ch->asyncflags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_INITIALIZED |
ASYNC_CLOSING);
ASYNC_CLOSING);
wake_up_interruptible(&ch->close_wait);
}
}
@ -522,12 +525,12 @@ static void shutdown(struct channel *ch)
static void pc_hangup(struct tty_struct *tty)
{
struct channel *ch;
/*
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
ch = verifyChannel(tty);
if (ch != NULL) {
unsigned long flags;
pc_flush_buffer(tty);
@ -545,7 +548,7 @@ static void pc_hangup(struct tty_struct *tty)
}
static int pc_write(struct tty_struct *tty,
const unsigned char *buf, int bytesAvailable)
const unsigned char *buf, int bytesAvailable)
{
unsigned int head, tail;
int dataLen;
@ -569,7 +572,8 @@ static int pc_write(struct tty_struct *tty,
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) == NULL)
ch = verifyChannel(tty);
if (ch == NULL)
return 0;
/* Make a pointer to the channel data structure found on the board. */
@ -644,19 +648,17 @@ static int pc_write(struct tty_struct *tty,
static int pc_write_room(struct tty_struct *tty)
{
int remain;
int remain = 0;
struct channel *ch;
unsigned long flags;
unsigned int head, tail;
struct board_chan __iomem *bc;
remain = 0;
/*
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
ch = verifyChannel(tty);
if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
globalwinon(ch);
@ -668,8 +670,8 @@ static int pc_write_room(struct tty_struct *tty)
tail = readw(&bc->tout);
/* Wrap tail if necessary */
tail &= (ch->txbufsize - 1);
if ((remain = tail - head - 1) < 0 )
remain = tail - head - 1;
if (remain < 0)
remain += ch->txbufsize;
if (remain && (ch->statusflags & LOWWAIT) == 0) {
@ -691,12 +693,12 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
unsigned long flags;
struct channel *ch;
struct board_chan __iomem *bc;
/*
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) == NULL)
ch = verifyChannel(tty);
if (ch == NULL)
return 0;
spin_lock_irqsave(&epca_lock, flags);
@ -707,7 +709,8 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
head = readw(&bc->tin);
ctail = readw(&ch->mailbox->cout);
if (tail == head && readw(&ch->mailbox->cin) == ctail && readb(&bc->tbusy) == 0)
if (tail == head && readw(&ch->mailbox->cin) == ctail &&
readb(&bc->tbusy) == 0)
chars = 0;
else { /* Begin if some space on the card has been used */
head = readw(&bc->tin) & (ch->txbufsize - 1);
@ -717,7 +720,8 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
* pc_write_room here we are finding the amount of bytes in the
* buffer filled. Not the amount of bytes empty.
*/
if ((remain = tail - head - 1) < 0 )
remain = tail - head - 1;
if (remain < 0)
remain += ch->txbufsize;
chars = (int)(ch->txbufsize - remain);
/*
@ -728,7 +732,7 @@ static int pc_chars_in_buffer(struct tty_struct *tty)
* transmit buffer empties.
*/
if (!(ch->statusflags & EMPTYWAIT))
setup_empty_event(tty,ch);
setup_empty_event(tty, ch);
} /* End if some space on the card has been used */
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
@ -746,7 +750,8 @@ static void pc_flush_buffer(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) == NULL)
ch = verifyChannel(tty);
if (ch == NULL)
return;
spin_lock_irqsave(&epca_lock, flags);
@ -767,23 +772,25 @@ static void pc_flush_chars(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
ch = verifyChannel(tty);
if (ch != NULL) {
unsigned long flags;
spin_lock_irqsave(&epca_lock, flags);
/*
* If not already set and the transmitter is busy setup an
* event to indicate when the transmit empties.
*/
if ((ch->statusflags & TXBUSY) && !(ch->statusflags & EMPTYWAIT))
setup_empty_event(tty,ch);
if ((ch->statusflags & TXBUSY) &&
!(ch->statusflags & EMPTYWAIT))
setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
}
}
static int block_til_ready(struct tty_struct *tty,
struct file *filp, struct channel *ch)
struct file *filp, struct channel *ch)
{
DECLARE_WAITQUEUE(wait,current);
DECLARE_WAITQUEUE(wait, current);
int retval, do_clocal = 0;
unsigned long flags;
@ -831,8 +838,7 @@ static int block_til_ready(struct tty_struct *tty,
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
!(ch->asyncflags & ASYNC_INITIALIZED))
{
!(ch->asyncflags & ASYNC_INITIALIZED)) {
if (ch->asyncflags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
@ -872,7 +878,7 @@ static int block_til_ready(struct tty_struct *tty,
return 0;
}
static int pc_open(struct tty_struct *tty, struct file * filp)
static int pc_open(struct tty_struct *tty, struct file *filp)
{
struct channel *ch;
unsigned long flags;
@ -957,7 +963,7 @@ static int pc_open(struct tty_struct *tty, struct file * filp)
* The below routine generally sets up parity, baud, flow control
* issues, etc.... It effect both control flags and input flags.
*/
epcaparam(tty,ch);
epcaparam(tty, ch);
ch->asyncflags |= ASYNC_INITIALIZED;
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
@ -995,8 +1001,8 @@ static void __exit epca_module_exit(void)
del_timer_sync(&epca_timer);
if (tty_unregister_driver(pc_driver) || tty_unregister_driver(pc_info))
{
if (tty_unregister_driver(pc_driver) ||
tty_unregister_driver(pc_info)) {
printk(KERN_WARNING "epca: cleanup_module failed to un-register tty driver\n");
return;
}
@ -1036,7 +1042,7 @@ static const struct tty_operations pc_ops = {
.hangup = pc_hangup,
};
static int info_open(struct tty_struct *tty, struct file * filp)
static int info_open(struct tty_struct *tty, struct file *filp)
{
return 0;
}
@ -1091,7 +1097,7 @@ static int __init pc_init(void)
* Set up interrupt, we will worry about memory allocation in
* post_fep_init.
*/
printk(KERN_INFO "DIGI epca driver version %s loaded.\n",VERSION);
printk(KERN_INFO "DIGI epca driver version %s loaded.\n", VERSION);
/*
* NOTE : This code assumes that the number of ports found in the
@ -1244,7 +1250,7 @@ static int __init pc_init(void)
if ((board_id & 0x30) == 0x30)
bd->memory_seg = 0x8000;
} else
printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n",(int)bd->port);
printk(KERN_ERR "epca: Board at 0x%x doesn't appear to be an XI\n", (int)bd->port);
break;
}
}
@ -1318,12 +1324,12 @@ static void post_fep_init(unsigned int crd)
*/
/* PCI cards are already remapped at this point ISA are not */
bd->numports = readw(bd->re_map_membase + XEMPORTS);
epcaassert(bd->numports <= 64,"PCI returned a invalid number of ports");
epcaassert(bd->numports <= 64, "PCI returned a invalid number of ports");
nbdevs += (bd->numports);
} else {
/* Fix up the mappings for ISA/EISA etc */
/* FIXME: 64K - can we be smarter ? */
bd->re_map_membase = ioremap(bd->membase, 0x10000);
bd->re_map_membase = ioremap_nocache(bd->membase, 0x10000);
}
if (crd != 0)
@ -1354,7 +1360,8 @@ static void post_fep_init(unsigned int crd)
* XEPORTS (address 0xc22) points at the number of channels the card
* supports. (For 64XE, XI, XEM, and XR use 0xc02)
*/
if ((bd->type == PCXEVE || bd->type == PCXE) && (readw(memaddr + XEPORTS) < 3))
if ((bd->type == PCXEVE || bd->type == PCXE) &&
(readw(memaddr + XEPORTS) < 3))
shrinkmem = 1;
if (bd->type < PCIXEM)
if (!request_region((int)bd->port, 4, board_desc[bd->type]))
@ -1453,10 +1460,12 @@ static void post_fep_init(unsigned int crd)
case PCXEVE:
case PCXE:
ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4) & 0x1fff);
ch->txptr = memaddr + (((tseg - bd->memory_seg) << 4)
& 0x1fff);
ch->txwin = FEPWIN | ((tseg - bd->memory_seg) >> 9);
ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4) & 0x1fff);
ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >>9 );
ch->rxptr = memaddr + (((rseg - bd->memory_seg) << 4)
& 0x1fff);
ch->rxwin = FEPWIN | ((rseg - bd->memory_seg) >> 9);
break;
case PCXI:
@ -1510,8 +1519,9 @@ static void post_fep_init(unsigned int crd)
}
printk(KERN_INFO
"Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
VERSION, board_desc[bd->type], (long)bd->port, (long)bd->membase, bd->numports);
"Digi PC/Xx Driver V%s: %s I/O = 0x%lx Mem = 0x%lx Ports = %d\n",
VERSION, board_desc[bd->type], (long)bd->port,
(long)bd->membase, bd->numports);
memwinoff(bd, 0);
}
@ -1519,7 +1529,7 @@ static void epcapoll(unsigned long ignored)
{
unsigned long flags;
int crd;
volatile unsigned int head, tail;
unsigned int head, tail;
struct channel *ch;
struct board_info *bd;
@ -1585,7 +1595,9 @@ static void doevent(int crd)
chan0 = card_ptr[crd];
epcaassert(chan0 <= &digi_channels[nbdevs - 1], "ch out of range");
assertgwinon(chan0);
while ((tail = readw(&chan0->mailbox->eout)) != (head = readw(&chan0->mailbox->ein))) { /* Begin while something in event queue */
while ((tail = readw(&chan0->mailbox->eout)) !=
(head = readw(&chan0->mailbox->ein))) {
/* Begin while something in event queue */
assertgwinon(chan0);
eventbuf = bd->re_map_membase + tail + ISTART;
/* Get the channel the event occurred on */
@ -1609,7 +1621,8 @@ static void doevent(int crd)
goto next;
}
if ((bc = ch->brdchan) == NULL)
bc = ch->brdchan;
if (bc == NULL)
goto next;
if (event & DATA_IND) { /* Begin DATA_IND */
@ -1621,10 +1634,11 @@ static void doevent(int crd)
/* A modem signal change has been indicated */
ch->imodem = mstat;
if (ch->asyncflags & ASYNC_CHECK_CD) {
if (mstat & ch->dcd) /* We are now receiving dcd */
/* We are now receiving dcd */
if (mstat & ch->dcd)
wake_up_interruptible(&ch->open_wait);
else
pc_sched_event(ch, EPCA_EVENT_HANGUP); /* No dcd; hangup */
else /* No dcd; hangup */
pc_sched_event(ch, EPCA_EVENT_HANGUP);
}
}
tty = ch->tty;
@ -1639,7 +1653,8 @@ static void doevent(int crd)
tty_wakeup(tty);
}
} else if (event & EMPTYTX_IND) {
/* This event is generated by setup_empty_event */
/* This event is generated by
setup_empty_event */
ch->statusflags &= ~TXBUSY;
if (ch->statusflags & EMPTYWAIT) {
ch->statusflags &= ~EMPTYWAIT;
@ -1647,7 +1662,7 @@ static void doevent(int crd)
}
}
}
next:
next:
globalwinon(ch);
BUG_ON(!bc);
writew(1, &bc->idata);
@ -1657,7 +1672,7 @@ static void doevent(int crd)
}
static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
int byte2, int ncmds, int bytecmd)
int byte2, int ncmds, int bytecmd)
{
unchar __iomem *memaddr;
unsigned int head, cmdTail, cmdStart, cmdMax;
@ -1682,8 +1697,10 @@ static void fepcmd(struct channel *ch, int cmd, int word_or_byte,
memaddr = ch->board->re_map_membase;
if (head >= (cmdMax - cmdStart) || (head & 03)) {
printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n", __LINE__, cmd, head);
printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n", __LINE__, cmdMax, cmdStart);
printk(KERN_ERR "line %d: Out of range, cmd = %x, head = %x\n",
__LINE__, cmd, head);
printk(KERN_ERR "line %d: Out of range, cmdMax = %x, cmdStart = %x\n",
__LINE__, cmdMax, cmdStart);
return;
}
if (bytecmd) {
@ -1762,7 +1779,7 @@ static unsigned termios2digi_h(struct channel *ch, unsigned cflag)
static unsigned termios2digi_i(struct channel *ch, unsigned iflag)
{
unsigned res = iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK |
INPCK | ISTRIP|IXON|IXANY|IXOFF);
INPCK | ISTRIP | IXON | IXANY | IXOFF);
if (ch->digiext.digi_flags & DIGI_AIXON)
res |= IAIXON;
return res;
@ -1876,8 +1893,10 @@ static void epcaparam(struct tty_struct *tty, struct channel *ch)
* Command sets channels iflag structure on the board. Such
* things as input soft flow control, handling of parity
* errors, and break handling are all set here.
*
* break handling, parity handling, input stripping,
* flow control chars
*/
/* break handling, parity handling, input stripping, flow control chars */
fepcmd(ch, SETIFLAGS, (unsigned int) ch->fepiflag, 0, 0, 0);
}
/*
@ -1973,7 +1992,7 @@ static void receive_data(struct channel *ch)
return;
/* If CREAD bit is off or device not open, set TX tail to head */
if (!tty || !ts || !(ts->c_cflag & CREAD)) {
if (!tty || !ts || !(ts->c_cflag & CREAD)) {
writew(head, &bc->rout);
return;
}
@ -1983,18 +2002,21 @@ static void receive_data(struct channel *ch)
if (readb(&bc->orun)) {
writeb(0, &bc->orun);
printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",tty->name);
printk(KERN_WARNING "epca; overrun! DigiBoard device %s\n",
tty->name);
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
rxwinon(ch);
while (bytesAvailable > 0) { /* Begin while there is data on the card */
while (bytesAvailable > 0) {
/* Begin while there is data on the card */
wrapgap = (head >= tail) ? head - tail : ch->rxbufsize - tail;
/*
* Even if head has wrapped around only report the amount of
* data to be equal to the size - tail. Remember memcpy can't
* automaticly wrap around the receive buffer.
*/
dataToRead = (wrapgap < bytesAvailable) ? wrapgap : bytesAvailable;
dataToRead = (wrapgap < bytesAvailable) ? wrapgap
: bytesAvailable;
/* Make sure we don't overflow the buffer */
dataToRead = tty_prepare_flip_string(tty, &rptr, dataToRead);
if (dataToRead == 0)
@ -2145,14 +2167,14 @@ static int pc_tiocmset(struct tty_struct *tty, struct file *file,
* The below routine generally sets up parity, baud, flow control
* issues, etc.... It effect both control flags and input flags.
*/
epcaparam(tty,ch);
epcaparam(tty, ch);
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
return 0;
}
static int pc_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
static int pc_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
digiflow_t dflow;
int retval;
@ -2167,7 +2189,6 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
bc = ch->brdchan;
else
return -EINVAL;
/*
* For POSIX compliance we need to add more ioctls. See tty_ioctl.c in
* /usr/src/linux/drivers/char for a good example. In particular think
@ -2178,9 +2199,10 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
retval = tty_check_change(tty);
if (retval)
return retval;
/* Setup an event to indicate when the transmit buffer empties */
/* Setup an event to indicate when the transmit
buffer empties */
spin_lock_irqsave(&epca_lock, flags);
setup_empty_event(tty,ch);
setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
tty_wait_until_sent(tty, 0);
if (!arg)
@ -2190,10 +2212,10 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
retval = tty_check_change(tty);
if (retval)
return retval;
/* Setup an event to indicate when the transmit buffer empties */
/* Setup an event to indicate when the transmit buffer
empties */
spin_lock_irqsave(&epca_lock, flags);
setup_empty_event(tty,ch);
setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
tty_wait_until_sent(tty, 0);
digi_send_break(ch, arg ? arg*(HZ/10) : HZ/4);
@ -2232,9 +2254,10 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
case DIGI_SETAF:
lock_kernel();
if (cmd == DIGI_SETAW) {
/* Setup an event to indicate when the transmit buffer empties */
/* Setup an event to indicate when the transmit
buffer empties */
spin_lock_irqsave(&epca_lock, flags);
setup_empty_event(tty,ch);
setup_empty_event(tty, ch);
spin_unlock_irqrestore(&epca_lock, flags);
tty_wait_until_sent(tty, 0);
} else {
@ -2264,7 +2287,7 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
* control issues, etc.... It effect both control flags and
* input flags.
*/
epcaparam(tty,ch);
epcaparam(tty, ch);
memoff(ch);
spin_unlock_irqrestore(&epca_lock, flags);
break;
@ -2300,18 +2323,21 @@ static int pc_ioctl(struct tty_struct *tty, struct file * file,
if (copy_from_user(&dflow, argp, sizeof(dflow)))
return -EFAULT;
if (dflow.startc != startc || dflow.stopc != stopc) { /* Begin if setflow toggled */
if (dflow.startc != startc || dflow.stopc != stopc) {
/* Begin if setflow toggled */
spin_lock_irqsave(&epca_lock, flags);
globalwinon(ch);
if (cmd == DIGI_SETFLOW) {
ch->fepstartc = ch->startc = dflow.startc;
ch->fepstopc = ch->stopc = dflow.stopc;
fepcmd(ch, SONOFFC, ch->fepstartc, ch->fepstopc, 0, 1);
fepcmd(ch, SONOFFC, ch->fepstartc,
ch->fepstopc, 0, 1);
} else {
ch->fepstartca = ch->startca = dflow.startc;
ch->fepstopca = ch->stopca = dflow.stopc;
fepcmd(ch, SAUXONOFFC, ch->fepstartca, ch->fepstopca, 0, 1);
fepcmd(ch, SAUXONOFFC, ch->fepstartca,
ch->fepstopca, 0, 1);
}
if (ch->statusflags & TXSTOPPED)
@ -2335,7 +2361,9 @@ static void pc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) { /* Begin if channel valid */
ch = verifyChannel(tty);
if (ch != NULL) { /* Begin if channel valid */
spin_lock_irqsave(&epca_lock, flags);
globalwinon(ch);
epcaparam(tty, ch);
@ -2362,7 +2390,7 @@ static void do_softint(struct work_struct *work)
if (tty && tty->driver_data) {
if (test_and_clear_bit(EPCA_EVENT_HANGUP, &ch->event)) {
tty_hangup(tty); /* FIXME: module removal race here - AKPM */
tty_hangup(tty);
wake_up_interruptible(&ch->open_wait);
ch->asyncflags &= ~ASYNC_NORMAL_ACTIVE;
}
@ -2382,9 +2410,11 @@ static void pc_stop(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
ch = verifyChannel(tty);
if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
if ((ch->statusflags & TXSTOPPED) == 0) { /* Begin if transmit stop requested */
if ((ch->statusflags & TXSTOPPED) == 0) {
/* Begin if transmit stop requested */
globalwinon(ch);
/* STOP transmitting now !! */
fepcmd(ch, PAUSETX, 0, 0, 0, 0);
@ -2402,11 +2432,14 @@ static void pc_start(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
ch = verifyChannel(tty);
if (ch != NULL) {
unsigned long flags;
spin_lock_irqsave(&epca_lock, flags);
/* Just in case output was resumed because of a change in Digi-flow */
if (ch->statusflags & TXSTOPPED) { /* Begin transmit resume requested */
/* Just in case output was resumed because of a change
in Digi-flow */
if (ch->statusflags & TXSTOPPED) {
/* Begin transmit resume requested */
struct board_chan __iomem *bc;
globalwinon(ch);
bc = ch->brdchan;
@ -2436,7 +2469,8 @@ static void pc_throttle(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
ch = verifyChannel(tty);
if (ch != NULL) {
spin_lock_irqsave(&epca_lock, flags);
if ((ch->statusflags & RXSTOPPED) == 0) {
globalwinon(ch);
@ -2456,8 +2490,10 @@ static void pc_unthrottle(struct tty_struct *tty)
* verifyChannel returns the channel from the tty struct if it is
* valid. This serves as a sanity check.
*/
if ((ch = verifyChannel(tty)) != NULL) {
/* Just in case output was resumed because of a change in Digi-flow */
ch = verifyChannel(tty);
if (ch != NULL) {
/* Just in case output was resumed because of a change
in Digi-flow */
spin_lock_irqsave(&epca_lock, flags);
if (ch->statusflags & RXSTOPPED) {
globalwinon(ch);
@ -2502,7 +2538,7 @@ static void setup_empty_event(struct tty_struct *tty, struct channel *ch)
memoff(ch);
}
void epca_setup(char *str, int *ints)
static void epca_setup(char *str, int *ints)
{
struct board_info board;
int index, loop, last;
@ -2531,14 +2567,16 @@ void epca_setup(char *str, int *ints)
* instructing the driver to ignore epcaconfig.) For
* this reason we check for 2.
*/
if (board.status == 2) { /* Begin ignore epcaconfig as well as lilo cmd line */
if (board.status == 2) {
/* Begin ignore epcaconfig as well as lilo cmd line */
nbdevs = 0;
num_cards = 0;
return;
} /* End ignore epcaconfig as well as lilo cmd line */
if (board.status > 2) {
printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n", board.status);
printk(KERN_ERR "epca_setup: Invalid board status 0x%x\n",
board.status);
invalid_lilo_config = 1;
setup_error_code |= INVALID_BOARD_STATUS;
return;
@ -2592,7 +2630,8 @@ void epca_setup(char *str, int *ints)
case 6:
board.membase = ints[index];
if (ints[index] <= 0) {
printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",(unsigned int)board.membase);
printk(KERN_ERR "epca_setup: Invalid memory base 0x%x\n",
(unsigned int)board.membase);
invalid_lilo_config = 1;
setup_error_code |= INVALID_MEM_BASE;
return;
@ -2723,7 +2762,7 @@ void epca_setup(char *str, int *ints)
t2++;
if (*t2) {
printk(KERN_ERR "epca_setup: Invalid memory base %s\n",str);
printk(KERN_ERR "epca_setup: Invalid memory base %s\n", str);
invalid_lilo_config = 1;
setup_error_code |= INVALID_MEM_BASE;
return;
@ -2745,7 +2784,7 @@ void epca_setup(char *str, int *ints)
/* I should REALLY validate the stuff here */
/* Copies our local copy of board into boards */
memcpy((void *)&boards[num_cards],(void *)&board, sizeof(board));
memcpy((void *)&boards[num_cards], (void *)&board, sizeof(board));
/* Does this get called once per lilo arg are what ? */
printk(KERN_INFO "PC/Xx: Added board %i, %s %i ports at 0x%4.4X base 0x%6.6X\n",
num_cards, board_desc[board.type],
@ -2786,9 +2825,9 @@ static int __devinit epca_init_one(struct pci_dev *pdev,
if (board_idx >= MAXBOARDS)
goto err_out;
addr = pci_resource_start (pdev, epca_info_tbl[info_idx].bar_idx);
addr = pci_resource_start(pdev, epca_info_tbl[info_idx].bar_idx);
if (!addr) {
printk (KERN_ERR PFX "PCI region #%d not available (size 0)\n",
printk(KERN_ERR PFX "PCI region #%d not available (size 0)\n",
epca_info_tbl[info_idx].bar_idx);
goto err_out;
}
@ -2799,28 +2838,29 @@ static int __devinit epca_init_one(struct pci_dev *pdev,
boards[board_idx].port = addr + PCI_IO_OFFSET;
boards[board_idx].membase = addr;
if (!request_mem_region (addr + PCI_IO_OFFSET, 0x200000, "epca")) {
printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
if (!request_mem_region(addr + PCI_IO_OFFSET, 0x200000, "epca")) {
printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
0x200000, addr + PCI_IO_OFFSET);
goto err_out;
}
boards[board_idx].re_map_port = ioremap(addr + PCI_IO_OFFSET, 0x200000);
boards[board_idx].re_map_port = ioremap_nocache(addr + PCI_IO_OFFSET,
0x200000);
if (!boards[board_idx].re_map_port) {
printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
0x200000, addr + PCI_IO_OFFSET);
goto err_out_free_pciio;
}
if (!request_mem_region (addr, 0x200000, "epca")) {
printk (KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
if (!request_mem_region(addr, 0x200000, "epca")) {
printk(KERN_ERR PFX "resource 0x%x @ 0x%lx unavailable\n",
0x200000, addr);
goto err_out_free_iounmap;
}
boards[board_idx].re_map_membase = ioremap(addr, 0x200000);
boards[board_idx].re_map_membase = ioremap_nocache(addr, 0x200000);
if (!boards[board_idx].re_map_membase) {
printk (KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
printk(KERN_ERR PFX "cannot map 0x%x @ 0x%lx\n",
0x200000, addr + PCI_IO_OFFSET);
goto err_out_free_memregion;
}
@ -2837,11 +2877,11 @@ static int __devinit epca_init_one(struct pci_dev *pdev,
return 0;
err_out_free_memregion:
release_mem_region (addr, 0x200000);
release_mem_region(addr, 0x200000);
err_out_free_iounmap:
iounmap (boards[board_idx].re_map_port);
iounmap(boards[board_idx].re_map_port);
err_out_free_pciio:
release_mem_region (addr + PCI_IO_OFFSET, 0x200000);
release_mem_region(addr + PCI_IO_OFFSET, 0x200000);
err_out:
return -ENODEV;
}
@ -2859,7 +2899,7 @@ MODULE_DEVICE_TABLE(pci, epca_pci_tbl);
static int __init init_PCI(void)
{
memset (&epca_driver, 0, sizeof (epca_driver));
memset(&epca_driver, 0, sizeof(epca_driver));
epca_driver.name = "epca";
epca_driver.id_table = epca_pci_tbl;
epca_driver.probe = epca_init_one;