dm mpath: add hp handler

This patch adds the most basic dm-multipath hardware support for the
HP active/passive arrays.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
This commit is contained in:
Dave Wysochanski 2007-10-19 22:47:54 +01:00 committed by Alasdair G Kergon
parent c9e45581ad
commit 16ebbf3584
3 changed files with 214 additions and 0 deletions

View file

@ -267,6 +267,12 @@ config DM_MULTIPATH_RDAC
---help---
Multipath support for LSI/Engenio RDAC.
config DM_MULTIPATH_HP
tristate "HP MSA multipath support (EXPERIMENTAL)"
depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
---help---
Multipath support for HP MSA (Active/Passive) series hardware.
config DM_DELAY
tristate "I/O delaying target (EXPERIMENTAL)"
depends on BLK_DEV_DM && EXPERIMENTAL

View file

@ -8,6 +8,7 @@ dm-multipath-objs := dm-hw-handler.o dm-path-selector.o dm-mpath.o
dm-snapshot-objs := dm-snap.o dm-exception-store.o
dm-mirror-objs := dm-log.o dm-raid1.o
dm-rdac-objs := dm-mpath-rdac.o
dm-hp-sw-objs := dm-mpath-hp-sw.o
md-mod-objs := md.o bitmap.o
raid456-objs := raid5.o raid6algos.o raid6recov.o raid6tables.o \
raid6int1.o raid6int2.o raid6int4.o \
@ -35,6 +36,7 @@ obj-$(CONFIG_DM_CRYPT) += dm-crypt.o
obj-$(CONFIG_DM_DELAY) += dm-delay.o
obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o
obj-$(CONFIG_DM_MULTIPATH_EMC) += dm-emc.o
obj-$(CONFIG_DM_MULTIPATH_HP) += dm-hp-sw.o
obj-$(CONFIG_DM_MULTIPATH_RDAC) += dm-rdac.o
obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o
obj-$(CONFIG_DM_MIRROR) += dm-mirror.o

206
drivers/md/dm-mpath-hp-sw.c Normal file
View file

@ -0,0 +1,206 @@
/*
* Copyright (C) 2005 Mike Christie, All rights reserved.
* Copyright (C) 2007 Red Hat, Inc. All rights reserved.
* Authors: Mike Christie
* Dave Wysochanski
*
* This file is released under the GPL.
*
* This module implements the specific path activation code for
* HP StorageWorks and FSC FibreCat Asymmetric (Active/Passive)
* storage arrays.
* These storage arrays have controller-based failover, not
* LUN-based failover. However, LUN-based failover is the design
* of dm-multipath. Thus, this module is written for LUN-based failover.
*/
#include <linux/blkdev.h>
#include <linux/list.h>
#include <linux/types.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include "dm.h"
#include "dm-hw-handler.h"
#define DM_MSG_PREFIX "multipath hp-sw"
#define DM_HP_HWH_NAME "hp-sw"
#define DM_HP_HWH_VER "0.0.3"
struct hp_sw_context {
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
};
/*
* hp_sw_end_io - Completion handler for HP path activation.
* @req: path activation request
* @error: scsi-ml error
*
* Check sense data, free request structure, and notify dm that
* pg initialization has completed.
*
* Context: scsi-ml softirq
*
* Possible optimizations
* 1. Actually check sense data for retryable error (e.g. NOT_READY)
*/
static void hp_sw_end_io(struct request *req, int error)
{
struct dm_path *path = req->end_io_data;
unsigned err_flags = 0;
if (!error)
DMDEBUG("%s path activation command - success",
path->dev->name);
else {
DMWARN("%s path activation command - error=0x%x",
path->dev->name, error);
err_flags = MP_FAIL_PATH;
}
req->end_io_data = NULL;
__blk_put_request(req->q, req);
dm_pg_init_complete(path, err_flags);
}
/*
* hp_sw_get_request - Allocate an HP specific path activation request
* @path: path on which request will be sent (needed for request queue)
*
* The START command is used for path activation request.
* These arrays are controller-based failover, not LUN based.
* One START command issued to a single path will fail over all
* LUNs for the same controller.
*
* Possible optimizations
* 1. Make timeout configurable
* 2. Preallocate request
*/
static struct request *hp_sw_get_request(struct dm_path *path)
{
struct request *req;
struct block_device *bdev = path->dev->bdev;
struct request_queue *q = bdev_get_queue(bdev);
struct hp_sw_context *h = path->hwhcontext;
req = blk_get_request(q, WRITE, GFP_NOIO);
if (!req)
goto out;
req->timeout = 60 * HZ;
req->errors = 0;
req->cmd_type = REQ_TYPE_BLOCK_PC;
req->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
req->end_io_data = path;
req->sense = h->sense;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
memset(&req->cmd, 0, BLK_MAX_CDB);
req->cmd[0] = START_STOP;
req->cmd[4] = 1;
req->cmd_len = COMMAND_SIZE(req->cmd[0]);
out:
return req;
}
/*
* hp_sw_pg_init - HP path activation implementation.
* @hwh: hardware handler specific data
* @bypassed: unused; is the path group bypassed? (see dm-mpath.c)
* @path: path to send initialization command
*
* Send an HP-specific path activation command on 'path'.
* Do not try to optimize in any way, just send the activation command.
* More than one path activation command may be sent to the same controller.
* This seems to work fine for basic failover support.
*
* Possible optimizations
* 1. Detect an in-progress activation request and avoid submitting another one
* 2. Model the controller and only send a single activation request at a time
* 3. Determine the state of a path before sending an activation request
*
* Context: kmpathd (see process_queued_ios() in dm-mpath.c)
*/
static void hp_sw_pg_init(struct hw_handler *hwh, unsigned bypassed,
struct dm_path *path)
{
struct request *req;
struct hp_sw_context *h;
path->hwhcontext = hwh->context;
h = hwh->context;
req = hp_sw_get_request(path);
if (!req) {
DMERR("%s path activation command - allocation fail",
path->dev->name);
goto fail;
}
DMDEBUG("%s path activation command - sent", path->dev->name);
blk_execute_rq_nowait(req->q, NULL, req, 1, hp_sw_end_io);
return;
fail:
dm_pg_init_complete(path, MP_FAIL_PATH);
}
static int hp_sw_create(struct hw_handler *hwh, unsigned argc, char **argv)
{
struct hp_sw_context *h;
h = kmalloc(sizeof(*h), GFP_KERNEL);
if (!h)
return -ENOMEM;
hwh->context = h;
return 0;
}
static void hp_sw_destroy(struct hw_handler *hwh)
{
struct hp_sw_context *h = hwh->context;
kfree(h);
}
static struct hw_handler_type hp_sw_hwh = {
.name = DM_HP_HWH_NAME,
.module = THIS_MODULE,
.create = hp_sw_create,
.destroy = hp_sw_destroy,
.pg_init = hp_sw_pg_init,
};
static int __init hp_sw_init(void)
{
int r;
r = dm_register_hw_handler(&hp_sw_hwh);
if (r < 0)
DMERR("register failed %d", r);
else
DMINFO("version " DM_HP_HWH_VER " loaded");
return r;
}
static void __exit hp_sw_exit(void)
{
int r;
r = dm_unregister_hw_handler(&hp_sw_hwh);
if (r < 0)
DMERR("unregister failed %d", r);
}
module_init(hp_sw_init);
module_exit(hp_sw_exit);
MODULE_DESCRIPTION("DM Multipath HP StorageWorks / FSC FibreCat (A/P) support");
MODULE_AUTHOR("Mike Christie, Dave Wysochanski <dm-devel@redhat.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DM_HP_HWH_VER);