Merge branch 'linus' into x86/header-guards

Conflicts:

	include/asm-x86/gpio.h
	include/asm-x86/ide.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2008-07-26 15:30:40 +02:00
commit 1503af6619
1956 changed files with 82958 additions and 60075 deletions

View file

@ -317,6 +317,14 @@ S: 2322 37th Ave SW
S: Seattle, Washington 98126-2010
S: USA
N: Muli Ben-Yehuda
E: mulix@mulix.org
E: muli@il.ibm.com
W: http://www.mulix.org
D: trident OSS sound driver, x86-64 dma-ops and Calgary IOMMU,
D: KVM and Xen bits and other misc. hackery.
S: Haifa, Israel
N: Johannes Berg
E: johannes@sipsolutions.net
W: http://johannes.sipsolutions.net/

View file

@ -361,8 +361,6 @@ telephony/
- directory with info on telephony (e.g. voice over IP) support.
time_interpolators.txt
- info on time interpolators.
tipar.txt
- information about Parallel link cable for Texas Instruments handhelds.
tty.txt
- guide to the locking policies of the tty layer.
uml/

View file

@ -0,0 +1,20 @@
What: /sys/dev
Date: April 2008
KernelVersion: 2.6.26
Contact: Dan Williams <dan.j.williams@intel.com>
Description: The /sys/dev tree provides a method to look up the sysfs
path for a device using the information returned from
stat(2). There are two directories, 'block' and 'char',
beneath /sys/dev containing symbolic links with names of
the form "<major>:<minor>". These links point to the
corresponding sysfs path for the given device.
Example:
$ readlink /sys/dev/block/8:32
../../block/sdc
Entries in /sys/dev/char and /sys/dev/block will be
dynamically created and destroyed as devices enter and
leave the system.
Users: mdadm <linux-raid@vger.kernel.org>

View file

@ -0,0 +1,24 @@
What: /sys/devices/system/memory
Date: June 2008
Contact: Badari Pulavarty <pbadari@us.ibm.com>
Description:
The /sys/devices/system/memory contains a snapshot of the
internal state of the kernel memory blocks. Files could be
added or removed dynamically to represent hot-add/remove
operations.
Users: hotplug memory add/remove tools
https://w3.opensource.ibm.com/projects/powerpc-utils/
What: /sys/devices/system/memory/memoryX/removable
Date: June 2008
Contact: Badari Pulavarty <pbadari@us.ibm.com>
Description:
The file /sys/devices/system/memory/memoryX/removable
indicates whether this memory block is removable or not.
This is useful for a user-level agent to determine
identify removable sections of the memory before attempting
potentially expensive hot-remove memory operation
Users: hotplug memory remove tools
https://w3.opensource.ibm.com/projects/powerpc-utils/

View file

@ -0,0 +1,6 @@
What: /sys/kernel/mm
Date: July 2008
Contact: Nishanth Aravamudan <nacc@us.ibm.com>, VM maintainers
Description:
/sys/kernel/mm/ should contain any and all VM
related information in /sys/kernel/.

View file

@ -0,0 +1,15 @@
What: /sys/kernel/mm/hugepages/
Date: June 2008
Contact: Nishanth Aravamudan <nacc@us.ibm.com>, hugetlb maintainers
Description:
/sys/kernel/mm/hugepages/ contains a number of subdirectories
of the form hugepages-<size>kB, where <size> is the page size
of the hugepages supported by the kernel/CPU combination.
Under these directories are a number of files:
nr_hugepages
nr_overcommit_hugepages
free_hugepages
surplus_hugepages
resv_hugepages
See Documentation/vm/hugetlbpage.txt for details.

View file

@ -474,25 +474,29 @@ make a good program).
So, you can either get rid of GNU emacs, or change it to use saner
values. To do the latter, you can stick the following in your .emacs file:
(defun linux-c-mode ()
"C mode with adjusted defaults for use with the Linux kernel."
(interactive)
(c-mode)
(c-set-style "K&R")
(setq tab-width 8)
(setq indent-tabs-mode t)
(setq c-basic-offset 8))
(defun c-lineup-arglist-tabs-only (ignored)
"Line up argument lists by tabs, not spaces"
(let* ((anchor (c-langelem-pos c-syntactic-element))
(column (c-langelem-2nd-pos c-syntactic-element))
(offset (- (1+ column) anchor))
(steps (floor offset c-basic-offset)))
(* (max steps 1)
c-basic-offset)))
This will define the M-x linux-c-mode command. When hacking on a
module, if you put the string -*- linux-c -*- somewhere on the first
two lines, this mode will be automatically invoked. Also, you may want
to add
(add-hook 'c-mode-hook
(lambda ()
(let ((filename (buffer-file-name)))
;; Enable kernel mode for the appropriate files
(when (and filename
(string-match "~/src/linux-trees" filename))
(setq indent-tabs-mode t)
(c-set-style "linux")
(c-set-offset 'arglist-cont-nonempty
'(c-lineup-gcc-asm-reg
c-lineup-arglist-tabs-only))))))
(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode)
auto-mode-alist))
to your .emacs file if you want to have linux-c-mode switched on
automagically when you edit source files under /usr/src/linux.
This will make emacs go better with the kernel coding style for C
files below ~/src/linux-trees.
But even if you fail in getting emacs to do sane formatting, not
everything is lost: use "indent".

View file

@ -22,3 +22,12 @@ ready and available in memory. The DMA of the "completion indication"
could race with data DMA. Mapping the memory used for completion
indications with DMA_ATTR_WRITE_BARRIER would prevent the race.
DMA_ATTR_WEAK_ORDERING
----------------------
DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping
may be weakly ordered, that is that reads and writes may pass each other.
Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
those that do not will simply ignore the attribute and exhibit default
behavior.

View file

@ -219,10 +219,10 @@
</para>
<sect1 id="lock-intro">
<title>Three Main Types of Kernel Locks: Spinlocks, Mutexes and Semaphores</title>
<title>Two Main Types of Kernel Locks: Spinlocks and Mutexes</title>
<para>
There are three main types of kernel locks. The fundamental type
There are two main types of kernel locks. The fundamental type
is the spinlock
(<filename class="headerfile">include/asm/spinlock.h</filename>),
which is a very simple single-holder lock: if you can't get the
@ -239,14 +239,6 @@
can't sleep (see <xref linkend="sleeping-things"/>), and so have to
use a spinlock instead.
</para>
<para>
The third type is a semaphore
(<filename class="headerfile">include/linux/semaphore.h</filename>): it
can have more than one holder at any time (the number decided at
initialization time), although it is most commonly used as a
single-holder lock (a mutex). If you can't get a semaphore, your
task will be suspended and later on woken up - just like for mutexes.
</para>
<para>
Neither type of lock is recursive: see
<xref linkend="deadlock"/>.
@ -278,7 +270,7 @@
</para>
<para>
Semaphores still exist, because they are required for
Mutexes still exist, because they are required for
synchronization between <firstterm linkend="gloss-usercontext">user
contexts</firstterm>, as we will see below.
</para>
@ -289,18 +281,17 @@
<para>
If you have a data structure which is only ever accessed from
user context, then you can use a simple semaphore
(<filename>linux/linux/semaphore.h</filename>) to protect it. This
is the most trivial case: you initialize the semaphore to the number
of resources available (usually 1), and call
<function>down_interruptible()</function> to grab the semaphore, and
<function>up()</function> to release it. There is also a
<function>down()</function>, which should be avoided, because it
user context, then you can use a simple mutex
(<filename>include/linux/mutex.h</filename>) to protect it. This
is the most trivial case: you initialize the mutex. Then you can
call <function>mutex_lock_interruptible()</function> to grab the mutex,
and <function>mutex_unlock()</function> to release it. There is also a
<function>mutex_lock()</function>, which should be avoided, because it
will not return if a signal is received.
</para>
<para>
Example: <filename>linux/net/core/netfilter.c</filename> allows
Example: <filename>net/netfilter/nf_sockopt.c</filename> allows
registration of new <function>setsockopt()</function> and
<function>getsockopt()</function> calls, with
<function>nf_register_sockopt()</function>. Registration and
@ -515,7 +506,7 @@
<listitem>
<para>
If you are in a process context (any syscall) and want to
lock other process out, use a semaphore. You can take a semaphore
lock other process out, use a mutex. You can take a mutex
and sleep (<function>copy_from_user*(</function> or
<function>kmalloc(x,GFP_KERNEL)</function>).
</para>
@ -662,7 +653,7 @@
<entry>SLBH</entry>
<entry>SLBH</entry>
<entry>SLBH</entry>
<entry>DI</entry>
<entry>MLI</entry>
<entry>None</entry>
</row>
@ -692,8 +683,8 @@
<entry>spin_lock_bh</entry>
</row>
<row>
<entry>DI</entry>
<entry>down_interruptible</entry>
<entry>MLI</entry>
<entry>mutex_lock_interruptible</entry>
</row>
</tbody>
@ -1310,7 +1301,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
<para>
There is a coding bug where a piece of code tries to grab a
spinlock twice: it will spin forever, waiting for the lock to
be released (spinlocks, rwlocks and semaphores are not
be released (spinlocks, rwlocks and mutexes are not
recursive in Linux). This is trivial to diagnose: not a
stay-up-five-nights-talk-to-fluffy-code-bunnies kind of
problem.
@ -1335,7 +1326,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
<para>
This complete lockup is easy to diagnose: on SMP boxes the
watchdog timer or compiling with <symbol>DEBUG_SPINLOCKS</symbol> set
watchdog timer or compiling with <symbol>DEBUG_SPINLOCK</symbol> set
(<filename>include/linux/spinlock.h</filename>) will show this up
immediately when it happens.
</para>
@ -1558,7 +1549,7 @@ the amount of locking which needs to be done.
<title>Read/Write Lock Variants</title>
<para>
Both spinlocks and semaphores have read/write variants:
Both spinlocks and mutexes have read/write variants:
<type>rwlock_t</type> and <structname>struct rw_semaphore</structname>.
These divide users into two classes: the readers and the writers. If
you are only reading the data, you can get a read lock, but to write to
@ -1681,7 +1672,7 @@ the amount of locking which needs to be done.
#include &lt;linux/slab.h&gt;
#include &lt;linux/string.h&gt;
+#include &lt;linux/rcupdate.h&gt;
#include &lt;linux/semaphore.h&gt;
#include &lt;linux/mutex.h&gt;
#include &lt;asm/errno.h&gt;
struct object
@ -1913,7 +1904,7 @@ machines due to caching.
</listitem>
<listitem>
<para>
<function> put_user()</function>
<function>put_user()</function>
</para>
</listitem>
</itemizedlist>
@ -1927,13 +1918,13 @@ machines due to caching.
<listitem>
<para>
<function>down_interruptible()</function> and
<function>down()</function>
<function>mutex_lock_interruptible()</function> and
<function>mutex_lock()</function>
</para>
<para>
There is a <function>down_trylock()</function> which can be
There is a <function>mutex_trylock()</function> which can be
used inside interrupt context, as it will not sleep.
<function>up()</function> will also never sleep.
<function>mutex_unlock()</function> will also never sleep.
</para>
</listitem>
</itemizedlist>
@ -2023,7 +2014,7 @@ machines due to caching.
<para>
Prior to 2.5, or when <symbol>CONFIG_PREEMPT</symbol> is
unset, processes in user context inside the kernel would not
preempt each other (ie. you had that CPU until you have it up,
preempt each other (ie. you had that CPU until you gave it up,
except for interrupts). With the addition of
<symbol>CONFIG_PREEMPT</symbol> in 2.5.4, this changed: when
in user context, higher priority tasks can "cut in": spinlocks

View file

@ -29,12 +29,12 @@
<revhistory>
<revision>
<revnumber>1.0&nbsp;</revnumber>
<revnumber>1.0</revnumber>
<date>May 30, 2001</date>
<revremark>Initial revision posted to linux-kernel</revremark>
</revision>
<revision>
<revnumber>1.1&nbsp;</revnumber>
<revnumber>1.1</revnumber>
<date>June 3, 2001</date>
<revremark>Revised after comments from linux-kernel</revremark>
</revision>

View file

@ -21,6 +21,18 @@
</affiliation>
</author>
<copyright>
<year>2006-2008</year>
<holder>Hans-Jürgen Koch.</holder>
</copyright>
<legalnotice>
<para>
This documentation is Free Software licensed under the terms of the
GPL version 2.
</para>
</legalnotice>
<pubdate>2006-12-11</pubdate>
<abstract>
@ -29,6 +41,12 @@
</abstract>
<revhistory>
<revision>
<revnumber>0.5</revnumber>
<date>2008-05-22</date>
<authorinitials>hjk</authorinitials>
<revremark>Added description of write() function.</revremark>
</revision>
<revision>
<revnumber>0.4</revnumber>
<date>2007-11-26</date>
@ -57,20 +75,9 @@
</bookinfo>
<chapter id="aboutthisdoc">
<?dbhtml filename="about.html"?>
<?dbhtml filename="aboutthis.html"?>
<title>About this document</title>
<sect1 id="copyright">
<?dbhtml filename="copyright.html"?>
<title>Copyright and License</title>
<para>
Copyright (c) 2006 by Hans-Jürgen Koch.</para>
<para>
This documentation is Free Software licensed under the terms of the
GPL version 2.
</para>
</sect1>
<sect1 id="translations">
<?dbhtml filename="translations.html"?>
<title>Translations</title>
@ -189,6 +196,30 @@ interested in translating it, please email me
represents the total interrupt count. You can use this number
to figure out if you missed some interrupts.
</para>
<para>
For some hardware that has more than one interrupt source internally,
but not separate IRQ mask and status registers, there might be
situations where userspace cannot determine what the interrupt source
was if the kernel handler disables them by writing to the chip's IRQ
register. In such a case, the kernel has to disable the IRQ completely
to leave the chip's register untouched. Now the userspace part can
determine the cause of the interrupt, but it cannot re-enable
interrupts. Another cornercase is chips where re-enabling interrupts
is a read-modify-write operation to a combined IRQ status/acknowledge
register. This would be racy if a new interrupt occurred
simultaneously.
</para>
<para>
To address these problems, UIO also implements a write() function. It
is normally not used and can be ignored for hardware that has only a
single interrupt source or has separate IRQ mask and status registers.
If you need it, however, a write to <filename>/dev/uioX</filename>
will call the <function>irqcontrol()</function> function implemented
by the driver. You have to write a 32-bit value that is usually either
0 or 1 to disable or enable interrupts. If a driver does not implement
<function>irqcontrol()</function>, <function>write()</function> will
return with <varname>-ENOSYS</varname>.
</para>
<para>
To handle interrupts properly, your custom kernel module can
@ -362,6 +393,14 @@ device is actually used.
<function>open()</function>, you will probably also want a custom
<function>release()</function> function.
</para></listitem>
<listitem><para>
<varname>int (*irqcontrol)(struct uio_info *info, s32 irq_on)
</varname>: Optional. If you need to be able to enable or disable
interrupts from userspace by writing to <filename>/dev/uioX</filename>,
you can implement this function. The parameter <varname>irq_on</varname>
will be 0 to disable interrupts and 1 to enable them.
</para></listitem>
</itemizedlist>
<para>

View file

@ -358,7 +358,7 @@ Here is a list of some of the different kernel trees available:
- pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
- SCSI, James Bottomley <James.Bottomley@SteelEye.com>
- SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
- x86, Ingo Molnar <mingo@elte.hu>

View file

@ -11,6 +11,7 @@ the delays experienced by a task while
a) waiting for a CPU (while being runnable)
b) completion of synchronous block I/O initiated by the task
c) swapping in pages
d) memory reclaim
and makes these statistics available to userspace through
the taskstats interface.
@ -41,7 +42,7 @@ this structure. See
include/linux/taskstats.h
for a description of the fields pertaining to delay accounting.
It will generally be in the form of counters returning the cumulative
delay seen for cpu, sync block I/O, swapin etc.
delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
Taking the difference of two successive readings of a given
counter (say cpu_delay_total) for a task will give the delay
@ -94,7 +95,9 @@ CPU count real total virtual total delay total
7876 92005750 100000000 24001500
IO count delay total
0 0
MEM count delay total
SWAP count delay total
0 0
RECLAIM count delay total
0 0
Get delays seen in executing a given simple command
@ -108,5 +111,7 @@ CPU count real total virtual total delay total
6 4000250 4000000 0
IO count delay total
0 0
MEM count delay total
SWAP count delay total
0 0
RECLAIM count delay total
0 0

View file

@ -196,14 +196,18 @@ void print_delayacct(struct taskstats *t)
" %15llu%15llu%15llu%15llu\n"
"IO %15s%15s\n"
" %15llu%15llu\n"
"MEM %15s%15s\n"
"SWAP %15s%15s\n"
" %15llu%15llu\n"
"RECLAIM %12s%15s\n"
" %15llu%15llu\n",
"count", "real total", "virtual total", "delay total",
t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
t->cpu_delay_total,
"count", "delay total",
t->blkio_count, t->blkio_delay_total,
"count", "delay total", t->swapin_count, t->swapin_delay_total);
"count", "delay total", t->swapin_count, t->swapin_delay_total,
"count", "delay total",
t->freepages_count, t->freepages_delay_total);
}
void task_context_switch_counts(struct taskstats *t)

View file

@ -26,6 +26,8 @@ There are three different groups of fields in the struct taskstats:
5) Time accounting for SMT machines
6) Extended delay accounting fields for memory reclaim
Future extension should add fields to the end of the taskstats struct, and
should not change the relative position of each field within the struct.
@ -170,4 +172,9 @@ struct taskstats {
__u64 ac_utimescaled; /* utime scaled on frequency etc */
__u64 ac_stimescaled; /* stime scaled on frequency etc */
__u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
6) Extended delay accounting fields for memory reclaim
/* Delay waiting for memory reclaim */
__u64 freepages_count;
__u64 freepages_delay_total;
}

View file

@ -0,0 +1,67 @@
===============================================================
== BT8XXGPIO driver ==
== ==
== A driver for a selfmade cheap BT8xx based PCI GPIO-card ==
== ==
== For advanced documentation, see ==
== http://www.bu3sch.de/btgpio.php ==
===============================================================
A generic digital 24-port PCI GPIO card can be built out of an ordinary
Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily
find them used for low prices on the net.
The bt8xx chip does have 24 digital GPIO ports.
These ports are accessible via 24 pins on the SMD chip package.
==============================================
== How to physically access the GPIO pins ==
==============================================
The are several ways to access these pins. One might unsolder the whole chip
and put it on a custom PCI board, or one might only unsolder each individual
GPIO pin and solder that to some tiny wire. As the chip package really is tiny
there are some advanced soldering skills needed in any case.
The physical pinouts are drawn in the following ASCII art.
The GPIO pins are marked with G00-G23
G G G G G G G G G G G G G G G G G G
0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
---------------------------------------------------------------------------
--| ^ ^ |--
--| pin 86 pin 67 |--
--| |--
--| pin 61 > |-- G18
--| |-- G19
--| |-- G20
--| |-- G21
--| |-- G22
--| pin 56 > |-- G23
--| |--
--| Brooktree 878/879 |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| O |--
--| |--
---------------------------------------------------------------------------
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
^
This is pin 1

View file

@ -242,8 +242,7 @@ rmdir() if there are no tasks.
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first
3. Teach controller to account for shared-pages
4. Start reclamation when the limit is lowered
5. Start reclamation in the background when the limit is
4. Start reclamation in the background when the limit is
not yet hit but the usage is getting closer
Summary

View file

@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked
set of DIMMs for channels 0 and 1.
Within each of the 'mc','mcX' and 'csrowX' directories are several
Within each of the 'mcX' and 'csrowX' directories are several
EDAC control and attribute files.
============================================================================
DIRECTORY 'mc'
In directory 'mc' are EDAC system overall control and attribute files:
Panic on UE control file:
'edac_mc_panic_on_ue'
An uncorrectable error will cause a machine panic. This is usually
desirable. It is a bad idea to continue when an uncorrectable error
occurs - it is indeterminate what was uncorrected and the operating
system context might be so mangled that continuing will lead to further
corruption. If the kernel has MCE configured, then EDAC will never
notice the UE.
LOAD TIME: module/kernel parameter: panic_on_ue=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue
Log UE control file:
'edac_mc_log_ue'
Generate kernel messages describing uncorrectable errors. These errors
are reported through the system message log system. UE statistics
will be accumulated even when UE logging is disabled.
LOAD TIME: module/kernel parameter: log_ue=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue
Log CE control file:
'edac_mc_log_ce'
Generate kernel messages describing correctable errors. These
errors are reported through the system message log system.
CE statistics will be accumulated even when CE logging is disabled.
LOAD TIME: module/kernel parameter: log_ce=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce
Polling period control file:
'edac_mc_poll_msec'
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
locating the error. 1000 milliseconds (once each second) is the current
default. Systems which require all the bandwidth they can get, may
increase this.
LOAD TIME: module/kernel parameter: poll_msec=[0|1]
RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec
============================================================================
'mcX' DIRECTORIES
@ -537,7 +472,6 @@ Channel 1 DIMM Label control file:
motherboard specific and determination of this information
must occur in userland at this time.
============================================================================
SYSTEM LOGGING
@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional,
driver-specific error message.
============================================================================
PCI Bus Parity Detection
@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file:
echo "0" >/sys/devices/system/edac/pci/check_pci_parity
Parity Count:
'pci_parity_count'
This attribute file will display the number of parity errors that
have been detected.
============================================================================
MODULE PARAMETERS
Panic on UE control file:
'edac_mc_panic_on_ue'
An uncorrectable error will cause a machine panic. This is usually
desirable. It is a bad idea to continue when an uncorrectable error
occurs - it is indeterminate what was uncorrected and the operating
system context might be so mangled that continuing will lead to further
corruption. If the kernel has MCE configured, then EDAC will never
notice the UE.
LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue
Log UE control file:
'edac_mc_log_ue'
Generate kernel messages describing uncorrectable errors. These errors
are reported through the system message log system. UE statistics
will be accumulated even when UE logging is disabled.
LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue
Log CE control file:
'edac_mc_log_ce'
Generate kernel messages describing correctable errors. These
errors are reported through the system message log system.
CE statistics will be accumulated even when CE logging is disabled.
LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce
Polling period control file:
'edac_mc_poll_msec'
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
locating the error. 1000 milliseconds (once each second) is the current
default. Systems which require all the bandwidth they can get, may
increase this.
LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1]
RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec
Panic on PCI PARITY Error:
@ -614,21 +615,13 @@ Panic on PCI PARITY Error:
error has been detected.
module/kernel parameter: panic_on_pci_parity=[0|1]
module/kernel parameter: edac_panic_on_pci_pe=[0|1]
Enable:
echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity
echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
Disable:
echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity
Parity Count:
'pci_parity_count'
This attribute file will display the number of parity errors that
have been detected.
echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe

View file

@ -0,0 +1,131 @@
SH7760/SH7763 integrated LCDC Framebuffer driver
================================================
0. Overwiew
-----------
The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
supports (in theory) resolutions ranging from 1x1 to 1024x1024,
with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
Caveats:
* Framebuffer memory must be a large chunk allocated at the top
of Area3 (HW requirement). Because of this requirement you should NOT
make the driver a module since at runtime it may become impossible to
get a large enough contiguous chunk of memory.
* The driver does not support changing resolution while loaded
(displays aren't hotpluggable anyway)
* Heavy flickering may be observed
a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
b) during PCMCIA (or any other slow bus) activity.
* Rotation works only 90degress clockwise, and only if horizontal
resolution is <= 320 pixels.
files: drivers/video/sh7760fb.c
include/asm-sh/sh7760fb.h
Documentation/fb/sh7760fb.txt
1. Platform setup
-----------------
SH7760:
Video data is fetched via the DMABRG DMA engine, so you have to
configure the SH DMAC for DMABRG mode (write 0x94808080 to the
DMARSRA register somewhere at boot).
PFC registers PCCR and PCDR must be set to peripheral mode.
(write zeros to both).
The driver does NOT do the above for you since board setup is, well, job
of the board setup code.
2. Panel definitions
--------------------
The LCDC must explicitly be told about the type of LCD panel
attached. Data must be wrapped in a "struct sh7760fb_platdata" and
passed to the driver as platform_data.
Suggest you take a closer look at the SH7760 Manual, Section 30.
(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
The following code illustrates what needs to be done to
get the framebuffer working on a 640x480 TFT:
====================== cut here ======================================
#include <linux/fb.h>
#include <asm/sh7760fb.h>
/*
* NEC NL6440bc26-01 640x480 TFT
* dotclock 25175 kHz
* Xres 640 Yres 480
* Htotal 800 Vtotal 525
* HsynStart 656 VsynStart 490
* HsynLenn 30 VsynLenn 2
*
* The linux framebuffer layer does not use the syncstart/synclen
* values but right/left/upper/lower margin values. The comments
* for the x_margin explain how to calculate those from given
* panel sync timings.
*/
static struct fb_videomode nl6448bc26 = {
.name = "NL6448BC26",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39683, /* in picoseconds! */
.hsync_len = 30,
.vsync_len = 2,
.left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */
.right_margin = 16, /* HSYNSTART - XRES */
.upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */
.lower_margin = 10, /* VSYNSTART - YRES */
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
};
static struct sh7760fb_platdata sh7760fb_nl6448 = {
.def_mode = &nl6448bc26,
.ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */
.lddfr = LDDFR_8BPP, /* we want 8bit output */
.ldpmmr = 0x0070,
.ldpspr = 0x0500,
.ldaclnr = 0,
.ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
LDICKR_CLKDIV(1),
.rotate = 0,
.novsync = 1,
.blank = NULL,
};
/* SH7760:
* 0xFE300800: 256 * 4byte xRGB palette ram
* 0xFE300C00: 42 bytes ctrl registers
*/
static struct resource sh7760_lcdc_res[] = {
[0] = {
.start = 0xFE300800,
.end = 0xFE300CFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 65,
.end = 65,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sh7760_lcdc_dev = {
.dev = {
.platform_data = &sh7760fb_nl6448,
},
.name = "sh7760-lcdc",
.id = -1,
.resource = sh7760_lcdc_res,
.num_resources = ARRAY_SIZE(sh7760_lcdc_res),
};
====================== cut here ======================================

View file

@ -3,11 +3,25 @@ Tridentfb is a framebuffer driver for some Trident chip based cards.
The following list of chips is thought to be supported although not all are
tested:
those from the Image series with Cyber in their names - accelerated
those with Blade in their names (Blade3D,CyberBlade...) - accelerated
the newer CyberBladeXP family - nonaccelerated
those from the TGUI series 9440/96XX and with Cyber in their names
those from the Image series and with Cyber in their names
those with Blade in their names (Blade3D,CyberBlade...)
the newer CyberBladeXP family
Only PCI/AGP based cards are supported, none of the older Tridents.
All families are accelerated. Only PCI/AGP based cards are supported,
none of the older Tridents.
The driver supports 8, 16 and 32 bits per pixel depths.
The TGUI family requires a line length to be power of 2 if acceleration
is enabled. This means that range of possible resolutions and bpp is
limited comparing to the range if acceleration is disabled (see list
of parameters below).
Known bugs:
1. The driver randomly locks up on 3DImage975 chip with acceleration
enabled. The same happens in X11 (Xorg).
2. The ramdac speeds require some more fine tuning. It is possible to
switch resolution which the chip does not support at some depths for
older chips.
How to use it?
==============
@ -17,12 +31,11 @@ video=tridentfb
The parameters for tridentfb are concatenated with a ':' as in this example.
video=tridentfb:800x600,bpp=16,noaccel
video=tridentfb:800x600-16@75,noaccel
The second level parameters that tridentfb understands are:
noaccel - turns off acceleration (when it doesn't work for your card)
accel - force text acceleration (for boards which by default are noacceled)
fp - use flat panel related stuff
crt - assume monitor is present instead of fp
@ -31,21 +44,24 @@ center - for flat panels and resolutions smaller than native size center the
image, otherwise use
stretch
memsize - integer value in Kb, use if your card's memory size is misdetected.
memsize - integer value in KB, use if your card's memory size is misdetected.
look at the driver output to see what it says when initializing.
memdiff - integer value in Kb,should be nonzero if your card reports
more memory than it actually has.For instance mine is 192K less than
memdiff - integer value in KB, should be nonzero if your card reports
more memory than it actually has. For instance mine is 192K less than
detection says in all three BIOS selectable situations 2M, 4M, 8M.
Only use if your video memory is taken from main memory hence of
configurable size.Otherwise use memsize.
If in some modes which barely fit the memory you see garbage at the bottom
this might help by not letting change to that mode anymore.
configurable size. Otherwise use memsize.
If in some modes which barely fit the memory you see garbage
at the bottom this might help by not letting change to that mode
anymore.
nativex - the width in pixels of the flat panel.If you know it (usually 1024
800 or 1280) and it is not what the driver seems to detect use it.
bpp - bits per pixel (8,16 or 32)
mode - a mode name like 800x600 (as described in Documentation/fb/modedb.txt)
bpp - bits per pixel (8,16 or 32)
mode - a mode name like 800x600-8@75 as described in
Documentation/fb/modedb.txt
Using insane values for the above parameters will probably result in driver
misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or

View file

@ -138,24 +138,6 @@ Who: Kay Sievers <kay.sievers@suse.de>
---------------------------
What: find_task_by_pid
When: 2.6.26
Why: With pid namespaces, calling this funciton will return the
wrong task when called from inside a namespace.
The best way to save a task pid and find a task by this
pid later, is to find this task's struct pid pointer (or get
it directly from the task) and call pid_task() later.
If someone really needs to get a task by its pid_t, then
he most likely needs the find_task_by_vpid() to get the
task from the same namespace as the current task is in, but
this may be not so in general.
Who: Pavel Emelyanov <xemul@openvz.org>
---------------------------
What: ACPI procfs interface
When: July 2008
Why: ACPI sysfs conversion should be finished by January 2008.
@ -300,14 +282,6 @@ Who: ocfs2-devel@oss.oracle.com
---------------------------
What: asm/semaphore.h
When: 2.6.26
Why: Implementation became generic; users should now include
linux/semaphore.h instead.
Who: Matthew Wilcox <willy@linux.intel.com>
---------------------------
What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
When: June 2009

View file

@ -510,6 +510,7 @@ prototypes:
void (*close)(struct vm_area_struct*);
int (*fault)(struct vm_area_struct*, struct vm_fault *);
int (*page_mkwrite)(struct vm_area_struct *, struct page *);
int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
locking rules:
BKL mmap_sem PageLocked(page)
@ -517,6 +518,7 @@ open: no yes
close: no yes
fault: no yes
page_mkwrite: no yes no
access: no yes
->page_mkwrite() is called when a previously read-only page is
about to become writeable. The file system is responsible for
@ -525,6 +527,11 @@ taking to lock out truncate, the page range should be verified to be
within i_size. The page mapping should also be checked that it is not
NULL.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through
/proc/pid/mem or ptrace. This function is needed only for
VM_IO | VM_PFNMAP VMAs.
================================================================================
Dubious stuff

View file

@ -26,11 +26,11 @@ You can simplify mounting by just typing:
this will allocate the first available loopback device (and load loop.o
kernel module if necessary) automatically. If the loopback driver is not
loaded automatically, make sure that your kernel is compiled with kmod
support (CONFIG_KMOD) enabled. Beware that umount will not
deallocate /dev/loopN device if /etc/mtab file on your system is a
symbolic link to /proc/mounts. You will need to do it manually using
"-d" switch of losetup(8). Read losetup(8) manpage for more info.
loaded automatically, make sure that you have compiled the module and
that modprobe is functioning. Beware that umount will not deallocate
/dev/loopN device if /etc/mtab file on your system is a symbolic link to
/proc/mounts. You will need to do it manually using "-d" switch of
losetup(8). Read losetup(8) manpage for more info.
To create the BFS image under UnixWare you need to find out first which
slice contains it. The command prtvtoc(1M) is your friend:

View file

@ -296,6 +296,7 @@ Table 1-4: Kernel info in /proc
uptime System uptime
version Kernel version
video bttv info of video resources (2.4)
vmallocinfo Show vmalloced areas
..............................................................................
You can, for example, check which interrupts are currently in use and what
@ -557,6 +558,49 @@ VmallocTotal: total size of vmalloc memory area
VmallocUsed: amount of vmalloc area which is used
VmallocChunk: largest contigious block of vmalloc area which is free
..............................................................................
vmallocinfo:
Provides information about vmalloced/vmaped areas. One line per area,
containing the virtual address range of the area, size in bytes,
caller information of the creator, and optional information depending
on the kind of area :
pages=nr number of pages
phys=addr if a physical address was specified
ioremap I/O mapping (ioremap() and friends)
vmalloc vmalloc() area
vmap vmap()ed pages
user VM_USERMAP area
vpages buffer for pages pointers was vmalloced (huge area)
N<node>=nr (Only on NUMA kernels)
Number of pages allocated on memory node <node>
> cat /proc/vmallocinfo
0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
/0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
phys=7fee8000 ioremap
0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
phys=7fee7000 ioremap
0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
/0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
pages=2 vmalloc N1=2
0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
/0x130 [x_tables] pages=4 vmalloc N0=4
0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
pages=14 vmalloc N2=14
0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
pages=4 vmalloc N1=4
0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
pages=2 vmalloc N1=2
0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
pages=10 vmalloc N0=10
1.3 IDE devices in /proc/ide
----------------------------

View file

@ -248,6 +248,7 @@ The top level sysfs directory looks like:
block/
bus/
class/
dev/
devices/
firmware/
net/
@ -274,6 +275,11 @@ fs/ contains a directory for some filesystems. Currently each
filesystem wanting to export attributes must create its own hierarchy
below fs/ (see ./fuse.txt for an example).
dev/ contains two directories char/ and block/. Inside these two
directories there are symlinks named <major>:<minor>. These symlinks
point to the sysfs directory for the given device. /sys/dev provides a
quick way to lookup the sysfs interface for a device from the result of
a stat(2) operation.
More information can driver-model specific features can be found in
Documentation/driver-model/.

View file

@ -96,6 +96,14 @@ shortname=lower|win95|winnt|mixed
emulate the Windows 95 rule for create.
Default setting is `lower'.
tz=UTC -- Interpret timestamps as UTC rather than local time.
This option disables the conversion of timestamps
between local time (as used by Windows on FAT) and UTC
(which Linux uses internally). This is particuluarly
useful when mounting devices (like digital cameras)
that are set to UTC in order to avoid the pitfalls of
local time.
<bool>: 0,1,yes,no,true,false
TODO

View file

@ -347,15 +347,12 @@ necessarily be nonportable.
Dynamic definition of GPIOs is not currently standard; for example, as
a side effect of configuring an add-on board with some GPIO expanders.
These calls are purely for kernel space, but a userspace API could be built
on top of them.
GPIO implementor's framework (OPTIONAL)
=======================================
As noted earlier, there is an optional implementation framework making it
easier for platforms to support different kinds of GPIO controller using
the same programming interface.
the same programming interface. This framework is called "gpiolib".
As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
will be found there. That will list all the controllers registered through
@ -392,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested.
Platform Support
----------------
To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB"
To support this framework, a platform's Kconfig will "select" either
ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
They may also want to provide a custom value for ARCH_NR_GPIOS.
ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
into the kernel on that architecture.
ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
can enable it and build it into the kernel optionally.
If neither of these options are selected, the platform does not support
GPIOs through GPIO-lib and the code cannot be enabled by the user.
Trivial implementations of those functions can directly use framework
code, which always dispatches through the gpio_chip:
@ -439,4 +446,120 @@ becomes available. That may mean the device should not be registered until
calls for that GPIO can work. One way to address such dependencies is for
such gpio_chip controllers to provide setup() and teardown() callbacks to
board specific code; those board specific callbacks would register devices
once all the necessary resources are available.
once all the necessary resources are available, and remove them later when
the GPIO controller device becomes unavailable.
Sysfs Interface for Userspace (OPTIONAL)
========================================
Platforms which use the "gpiolib" implementors framework may choose to
configure a sysfs user interface to GPIOs. This is different from the
debugfs interface, since it provides control over GPIO direction and
value instead of just showing a gpio state summary. Plus, it could be
present on production systems without debugging support.
Given approprate hardware documentation for the system, userspace could
know for example that GPIO #23 controls the write protect line used to
protect boot loader segments in flash memory. System upgrade procedures
may need to temporarily remove that protection, first importing a GPIO,
then changing its output state, then updating the code before re-enabling
the write protection. In normal use, GPIO #23 would never be touched,
and the kernel would have no need to know about it.
Again depending on appropriate hardware documentation, on some systems
userspace GPIO can be used to determine system configuration data that
standard kernels won't know about. And for some tasks, simple userspace
GPIO drivers could be all that the system really needs.
Note that standard kernel drivers exist for common "LEDs and Buttons"
GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
instead of talking directly to the GPIOs; they integrate with kernel
frameworks better than your userspace code could.
Paths in Sysfs
--------------
There are three kinds of entry in /sys/class/gpio:
- Control interfaces used to get userspace control over GPIOs;
- GPIOs themselves; and
- GPIO controllers ("gpio_chip" instances).
That's in addition to standard files including the "device" symlink.
The control interfaces are write-only:
/sys/class/gpio/
"export" ... Userspace may ask the kernel to export control of
a GPIO to userspace by writing its number to this file.
Example: "echo 19 > export" will create a "gpio19" node
for GPIO #19, if that's not requested by kernel code.
"unexport" ... Reverses the effect of exporting to userspace.
Example: "echo 19 > unexport" will remove a "gpio19"
node exported using the "export" file.
GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
and have the following read/write attributes:
/sys/class/gpio/gpioN/
"direction" ... reads as either "in" or "out". This value may
normally be written. Writing as "out" defaults to
initializing the value as low. To ensure glitch free
operation, values "low" and "high" may be written to
configure the GPIO as an output with that initial value.
Note that this attribute *will not exist* if the kernel
doesn't support changing the direction of a GPIO, or
it was exported by kernel code that didn't explicitly
allow userspace to reconfigure this GPIO's direction.
"value" ... reads as either 0 (low) or 1 (high). If the GPIO
is configured as an output, this value may be written;
any nonzero value is treated as high.
GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the
controller implementing GPIOs starting at #42) and have the following
read-only attributes:
/sys/class/gpio/gpiochipN/
"base" ... same as N, the first GPIO managed by this chip
"label" ... provided for diagnostics (not always unique)
"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
Board documentation should in most cases cover what GPIOs are used for
what purposes. However, those numbers are not always stable; GPIOs on
a daughtercard might be different depending on the base board being used,
or other cards in the stack. In such cases, you may need to use the
gpiochip nodes (possibly in conjunction with schematics) to determine
the correct GPIO number to use for a given signal.
Exporting from Kernel code
--------------------------
Kernel code can explicitly manage exports of GPIOs which have already been
requested using gpio_request():
/* export the GPIO to userspace */
int gpio_export(unsigned gpio, bool direction_may_change);
/* reverse gpio_export() */
void gpio_unexport();
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpio_export(). The driver can control whether the
signal direction may change. This helps drivers prevent userspace code
from accidentally clobbering important system state.
This explicit exporting can help with debugging (by making some kinds
of experiments easier), or can provide an always-there interface that's
suitable for documenting as part of a board support package.

View file

@ -87,7 +87,8 @@ parameter is applicable:
SH SuperH architecture is enabled.
SMP The kernel is an SMP kernel.
SPARC Sparc architecture is enabled.
SWSUSP Software suspend is enabled.
SWSUSP Software suspend (hibernation) is enabled.
SUSPEND System suspend states are enabled.
TS Appropriate touchscreen support is enabled.
USB USB support is enabled.
USBHID USB Human Interface Device support is enabled.
@ -147,10 +148,12 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep, old_ordering }
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering }
See Documentation/power/video.txt for s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
s4_nohwsig prevents ACPI hardware signature from being
used during resume from hibernation.
old_ordering causes the ACPI 1.0 ordering of the _PTS
control method, wrt putting devices into low power
states, to be enforced (the ACPI 2.0 ordering of _PTS is
@ -774,8 +777,22 @@ and is between 256 and 4096 characters. It is defined in the file
hisax= [HW,ISDN]
See Documentation/isdn/README.HiSax.
hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages.
hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
On x86-64 and powerpc, this option can be specified
multiple times interleaved with hugepages= to reserve
huge pages of different sizes. Valid pages sizes on
x86-64 are 2M (when the CPU supports "pse") and 1G
(when the CPU supports the "pdpe1gb" cpuinfo flag)
Note that 1GB pages can only be allocated at boot time
using hugepages= and not freed afterwards.
default_hugepagesz=
[same as hugepagesz=] The size of the default
HugeTLB page size. This is the size represented by
the legacy /proc/ hugepages APIs, used for SHM, and
default size when mounting hugetlbfs filesystems.
Defaults to the default architecture's huge page size
if not specified.
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
@ -1225,6 +1242,14 @@ and is between 256 and 4096 characters. It is defined in the file
mga= [HW,DRM]
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
parameter allows control of the logging verbosity for
the additional memory initialisation checks. A value
of 0 disables mminit logging and a level of 4 will
log everything. Information is printed at KERN_DEBUG
so loglevel=8 may also need to be specified.
mousedev.tap_time=
[MOUSE] Maximum time between finger touching and
leaving touchpad surface for touch to be considered
@ -2034,6 +2059,9 @@ and is between 256 and 4096 characters. It is defined in the file
snd-ymfpci= [HW,ALSA]
softlockup_panic=
[KNL] Should the soft-lockup detector generate panics.
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/sonypi.txt
@ -2098,6 +2126,12 @@ and is between 256 and 4096 characters. It is defined in the file
tdfx= [HW,DRM]
test_suspend= [SUSPEND]
Specify "mem" (for Suspend-to-RAM) or "standby" (for
standby suspend) as the system sleep state to briefly
enter during system startup. The system is woken from
this state using a wakeup-capable RTC alarm.
thash_entries= [KNL,NET]
Set number of hash buckets for TCP connection
@ -2125,13 +2159,6 @@ and is between 256 and 4096 characters. It is defined in the file
<deci-seconds>: poll all this frequency
0: no polling (default)
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).
tipar.delay= [HW,PPT]
Set inter-bit delay in microseconds (default 10).
tmscsim= [HW,SCSI]
See comment before function dc390_setup() in
drivers/scsi/tmscsim.c.

View file

@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
Version 0.20
April 09th, 2008
Version 0.21
May 29th, 2008
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@ -621,7 +621,8 @@ Bluetooth
---------
procfs: /proc/acpi/ibm/bluetooth
sysfs device attribute: bluetooth_enable
sysfs device attribute: bluetooth_enable (deprecated)
sysfs rfkill class: switch "tpacpi_bluetooth_sw"
This feature shows the presence and current state of a ThinkPad
Bluetooth device in the internal ThinkPad CDC slot.
@ -643,8 +644,12 @@ Sysfs notes:
0: disables Bluetooth / Bluetooth is disabled
1: enables Bluetooth / Bluetooth is enabled.
Note: this interface will be probably be superseded by the
generic rfkill class, so it is NOT to be considered stable yet.
Note: this interface has been superseded by the generic rfkill
class. It has been deprecated, and it will be removed in year
2010.
rfkill controller switch "tpacpi_bluetooth_sw": refer to
Documentation/rfkill.txt for details.
Video output control -- /proc/acpi/ibm/video
--------------------------------------------
@ -1374,7 +1379,8 @@ EXPERIMENTAL: WAN
-----------------
procfs: /proc/acpi/ibm/wan
sysfs device attribute: wwan_enable
sysfs device attribute: wwan_enable (deprecated)
sysfs rfkill class: switch "tpacpi_wwan_sw"
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
@ -1404,8 +1410,12 @@ Sysfs notes:
0: disables WWAN card / WWAN card is disabled
1: enables WWAN card / WWAN card is enabled.
Note: this interface will be probably be superseded by the
generic rfkill class, so it is NOT to be considered stable yet.
Note: this interface has been superseded by the generic rfkill
class. It has been deprecated, and it will be removed in year
2010.
rfkill controller switch "tpacpi_wwan_sw": refer to
Documentation/rfkill.txt for details.
Multiple Commands, Module Parameters
------------------------------------

View file

@ -1,14 +1,22 @@
=============================================================================
MOXA Smartio/Industio Family Device Driver Installation Guide
for Linux Kernel 2.4.x, 2.6.x
Copyright (C) 2008, Moxa Inc.
=============================================================================
Date: 01/21/2008
MOXA Smartio Family Device Driver Ver 1.1 Installation Guide
for Linux Kernel 2.2.x and 2.0.3x
Copyright (C) 1999, Moxa Technologies Co, Ltd.
=============================================================================
Content
1. Introduction
2. System Requirement
3. Installation
3.1 Hardware installation
3.2 Driver files
3.3 Device naming convention
3.4 Module driver configuration
3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
3.6 Custom configuration
3.7 Verify driver installation
4. Utilities
5. Setserial
6. Troubleshooting
@ -16,27 +24,48 @@ Content
-----------------------------------------------------------------------------
1. Introduction
The Smartio family Linux driver, Ver. 1.1, supports following multiport
The Smartio/Industio/UPCI family Linux driver supports following multiport
boards.
-C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board.
-C168P/H/HS, C168H/PCI 8 port multiport board.
- 2 ports multiport board
CP-102U, CP-102UL, CP-102UF
CP-132U-I, CP-132UL,
CP-132, CP-132I, CP132S, CP-132IS,
CI-132, CI-132I, CI-132IS,
(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
This driver has been modified a little and cleaned up from the Moxa
contributed driver code and merged into Linux 2.2.14pre. In particular
official major/minor numbers have been assigned which are different to
those the original Moxa supplied driver used.
- 4 ports multiport board
CP-104EL,
CP-104UL, CP-104JU,
CP-134U, CP-134U-I,
C104H/PCI, C104HS/PCI,
CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
C104H, C104HS,
CI-104J, CI-104JS,
CI-134, CI-134I, CI-134IS,
(C114HI, CT-114I, C104P)
POS-104UL,
CB-114,
CB-134I
- 8 ports multiport board
CP-118EL, CP-168EL,
CP-118U, CP-168U,
C168H/PCI,
C168H, C168HS,
(C168P),
CB-108
This driver and installation procedure have been developed upon Linux Kernel
2.2.5 and backward compatible to 2.0.3x. This driver supports Intel x86 and
Alpha hardware platform. In order to maintain compatibility, this version
has also been properly tested with RedHat, OpenLinux, TurboLinux and
S.u.S.E Linux. However, if compatibility problem occurs, please contact
Moxa at support@moxa.com.tw.
2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
to maintain compatibility, this version has also been properly tested with
RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
occurs, please contact Moxa at support@moxa.com.tw.
In addition to device driver, useful utilities are also provided in this
version. They are
- msdiag Diagnostic program for detecting installed Moxa Smartio boards.
- msdiag Diagnostic program for displaying installed Moxa
Smartio/Industio boards.
- msmon Monitor program to observe data count and line status signals.
- msterm A simple terminal program which is useful in testing serial
ports.
@ -47,8 +76,7 @@ Content
GNU General Public License in this version. Please refer to GNU General
Public License announcement in each source code file for more detail.
In Moxa's ftp sites, you may always find latest driver at
ftp://ftp.moxa.com or ftp://ftp.moxa.com.tw.
In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
This version of driver can be installed as Loadable Module (Module driver)
or built-in into kernel (Static driver). You may refer to following
@ -61,8 +89,8 @@ Content
-----------------------------------------------------------------------------
2. System Requirement
- Hardware platform: Intel x86 or Alpha machine
- Kernel version: 2.0.3x or 2.2.x
- Hardware platform: Intel x86 machine
- Kernel version: 2.4.x or 2.6.x
- gcc version 2.72 or later
- Maximum 4 boards can be installed in combination
@ -70,9 +98,18 @@ Content
3. Installation
3.1 Hardware installation
3.2 Driver files
3.3 Device naming convention
3.4 Module driver configuration
3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x.
3.6 Custom configuration
3.7 Verify driver installation
There are two types of buses, ISA and PCI, for Smartio family multiport
board.
3.1 Hardware installation
There are two types of buses, ISA and PCI, for Smartio/Industio
family multiport board.
ISA board
---------
@ -81,47 +118,57 @@ Content
installation procedure in User's Manual before proceed any further.
Please make sure the JP1 is open after the ISA board is set properly.
PCI board
---------
PCI/UPCI board
--------------
You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
with other ISA devices. Please refer to hardware installation
procedure in User's Manual in advance.
IRQ Sharing
PCI IRQ Sharing
-----------
Each port within the same multiport board shares the same IRQ. Up to
4 Moxa Smartio Family multiport boards can be installed together on
one system and they can share the same IRQ.
4 Moxa Smartio/Industio PCI Family multiport boards can be installed
together on one system and they can share the same IRQ.
3.2 Driver files and device naming convention
3.2 Driver files
The driver file may be obtained from ftp, CD-ROM or floppy disk. The
first step, anyway, is to copy driver file "mxser.tgz" into specified
directory. e.g. /moxa. The execute commands as below.
# cd /
# mkdir moxa
# cd /moxa
# tar xvf /dev/fd0
# tar xvf /dev/fd0
or
# cd /
# mkdir moxa
# cd /moxa
# cp /mnt/cdrom/<driver directory>/mxser.tgz .
# tar xvfz mxser.tgz
3.3 Device naming convention
You may find all the driver and utilities files in /moxa/mxser.
Following installation procedure depends on the model you'd like to
run the driver. If you prefer module driver, please refer to 3.3.
If static driver is required, please refer to 3.4.
run the driver. If you prefer module driver, please refer to 3.4.
If static driver is required, please refer to 3.5.
Dialin and callout port
-----------------------
This driver remains traditional serial device properties. There're
This driver remains traditional serial device properties. There are
two special file name for each serial port. One is dial-in port
which is named "ttyMxx". For callout port, the naming convention
is "cumxx".
Device naming when more than 2 boards installed
-----------------------------------------------
Naming convention for each Smartio multiport board is pre-defined
as below.
Naming convention for each Smartio/Industio multiport board is
pre-defined as below.
Board Num. Dial-in Port Callout port
1st board ttyM0 - ttyM7 cum0 - cum7
@ -129,6 +176,12 @@ Content
3rd board ttyM16 - ttyM23 cum16 - cum23
4th board ttyM24 - ttym31 cum24 - cum31
!!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Under Kernel 2.6 the cum Device is Obsolete. So use ttyM*
device instead.
!!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Board sequence
--------------
This driver will activate ISA boards according to the parameter set
@ -138,69 +191,131 @@ Content
For PCI boards, their sequence will be after ISA boards and C168H/PCI
has higher priority than C104H/PCI boards.
3.3 Module driver configuration
3.4 Module driver configuration
Module driver is easiest way to install. If you prefer static driver
installation, please skip this paragraph.
1. Find "Makefile" in /moxa/mxser, then run
# make install
The driver files "mxser.o" and utilities will be properly compiled
and copied to system directories respectively.Then run
------------- Prepare to use the MOXA driver--------------------
3.4.1 Create tty device with correct major number
Before using MOXA driver, your system must have the tty devices
which are created with driver's major number. We offer one shell
script "msmknod" to simplify the procedure.
This step is only needed to be executed once. But you still
need to do this procedure when:
a. You change the driver's major number. Please refer the "3.7"
section.
b. Your total installed MOXA boards number is changed. Maybe you
add/delete one MOXA board.
c. You want to change the tty name. This needs to modify the
shell script "msmknod"
# insmod mxser
to activate the modular driver. You may run "lsmod" to check
if "mxser.o" is activated.
2. Create special files by executing "msmknod".
The procedure is:
# cd /moxa/mxser/driver
# ./msmknod
Default major numbers for dial-in device and callout device are
174, 175. Msmknod will delete any special files occupying the same
device naming.
This shell script will require the major number for dial-in
device and callout device to create tty device. You also need
to specify the total installed MOXA board number. Default major
numbers for dial-in device and callout device are 30, 35. If
you need to change to other number, please refer section "3.7"
for more detailed procedure.
Msmknod will delete any special files occupying the same device
naming.
3. Up to now, you may manually execute "insmod mxser" to activate
this driver and run "rmmod mxser" to remove it. However, it's
better to have a boot time configuration to eliminate manual
operation.
Boot time configuration can be achieved by rc file. Run following
command for setting rc files.
3.4.2 Build the MOXA driver and utilities
Before using the MOXA driver and utilities, you need compile the
all the source code. This step is only need to be executed once.
But you still re-compile the source code if you modify the source
code. For example, if you change the driver's major number (see
"3.7" section), then you need to do this step again.
Find "Makefile" in /moxa/mxser, then run
# make clean; make install
!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
# make clean; make installsp1
For Red Hat Enterprise Linux AS4/ES4/WS4:
# make clean; make installsp2
!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
The driver files "mxser.o" and utilities will be properly compiled
and copied to system directories respectively.
------------- Load MOXA driver--------------------
3.4.3 Load the MOXA driver
# modprobe mxser <argument>
will activate the module driver. You may run "lsmod" to check
if "mxser" is activated. If the MOXA board is ISA board, the
<argument> is needed. Please refer to section "3.4.5" for more
information.
------------- Load MOXA driver on boot --------------------
3.4.4 For the above description, you may manually execute
"modprobe mxser" to activate this driver and run
"rmmod mxser" to remove it.
However, it's better to have a boot time configuration to
eliminate manual operation. Boot time configuration can be
achieved by rc file. We offer one "rc.mxser" file to simplify
the procedure under "moxa/mxser/driver".
But if you use ISA board, please modify the "modprobe ..." command
to add the argument (see "3.4.5" section). After modifying the
rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
manually to make sure the modification is ok. If any error
encountered, please try to modify again. If the modification is
completed, follow the below step.
Run following command for setting rc files.
# cd /moxa/mxser/driver
# cp ./rc.mxser /etc/rc.d
# cd /etc/rc.d
You may have to modify part of the content in rc.mxser to specify
parameters for ISA board. Please refer to rc.mxser for more detail.
Find "rc.serial". If "rc.serial" doesn't exist, create it by vi.
Add "rc.mxser" in last line. Next, open rc.local by vi
and append following content.
Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
create it by vi, run "chmod 755 rc.serial" to change the permission.
Add "/etc/rc.d/rc.mxser" in last line,
if [ -f /etc/rc.d/rc.serial ]; then
sh /etc/rc.d/rc.serial
fi
Reboot and check if moxa.o activated by "lsmod" command.
4. Reboot and check if mxser.o activated by "lsmod" command.
5. If you'd like to drive Smartio ISA boards in the system, you'll
have to add parameter to specify CAP address of given board while
activating "mxser.o". The format for parameters are as follows.
3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system,
you'll have to add parameter to specify CAP address of given
board while activating "mxser.o". The format for parameters are
as follows.
insmod mxser ioaddr=0x???,0x???,0x???,0x???
modprobe mxser ioaddr=0x???,0x???,0x???,0x???
| | | |
| | | +- 4th ISA board
| | +------ 3rd ISA board
| +------------ 2nd ISA board
+------------------- 1st ISA board
3.4 Static driver configuration
3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
1. Create link
Note: To use static driver, you must install the linux kernel
source package.
3.5.1 Backup the built-in driver in the kernel.
# cd /usr/src/linux/drivers/char
# mv mxser.c mxser.c.old
For Red Hat 7.x user, you need to create link:
# cd /usr/src
# ln -s linux-2.4 linux
3.5.2 Create link
# cd /usr/src/linux/drivers/char
# ln -s /moxa/mxser/driver/mxser.c mxser.c
2. Add CAP address list for ISA boards
3.5.3 Add CAP address list for ISA boards. For PCI boards user,
please skip this step.
In module mode, the CAP address for ISA board is given by
parameter. In static driver configuration, you'll have to
assign it within driver's source code. If you will not
@ -222,73 +337,55 @@ Content
static int mxserBoardCAP[]
= {0x280, 0x180, 0x00, 0x00};
3. Modify tty_io.c
# cd /usr/src/linux/drivers/char/
# vi tty_io.c
Find pty_init(), insert "mxser_init()" as
3.5.4 Setup kernel configuration
pty_init();
mxser_init();
Configure the kernel:
4. Modify tty.h
# cd /usr/src/linux/include/linux
# vi tty.h
Find extern int tty_init(void), insert "mxser_init()" as
# cd /usr/src/linux
# make menuconfig
extern int tty_init(void);
extern int mxser_init(void);
5. Modify Makefile
# cd /usr/src/linux/drivers/char
# vi Makefile
Find L_OBJS := tty_io.o ...... random.o, add
"mxser.o" at last of this line as
L_OBJS := tty_io.o ....... mxser.o
You will go into a menu-driven system. Please select [Character
devices][Non-standard serial port support], enable the [Moxa
SmartIO support] driver with "[*]" for built-in (not "[M]"), then
select [Exit] to exit this program.
6. Rebuild kernel
The following are for Linux kernel rebuilding,for your reference only.
3.5.5 Rebuild kernel
The following are for Linux kernel rebuilding, for your
reference only.
For appropriate details, please refer to the Linux document.
If 'lilo' utility is installed, please use 'make zlilo' to rebuild
kernel. If 'lilo' is not installed, please follow the following steps.
a. cd /usr/src/linux
b. make clean /* take a few minutes */
c. make bzImage /* take probably 10-20 minutes */
d. Backup original boot kernel. /* optional step */
e. cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz
b. make clean /* take a few minutes */
c. make dep /* take a few minutes */
d. make bzImage /* take probably 10-20 minutes */
e. make install /* copy boot image to correct position */
f. Please make sure the boot kernel (vmlinuz) is in the
correct position. If you use 'lilo' utility, you should
check /etc/lilo.conf 'image' item specified the path
which is the 'vmlinuz' path, or you will load wrong
(or old) boot kernel image (vmlinuz).
g. chmod 400 /vmlinuz
h. lilo
i. rdev -R /vmlinuz 1
j. sync
correct position.
g. If you use 'lilo' utility, you should check /etc/lilo.conf
'image' item specified the path which is the 'vmlinuz' path,
or you will load wrong (or old) boot kernel image (vmlinuz).
After checking /etc/lilo.conf, please run "lilo".
Note that if the result of "make zImage" is ERROR, then you have to
go back to Linux configuration Setup. Type "make config" in directory
/usr/src/linux or "setup".
Note that if the result of "make bzImage" is ERROR, then you have to
go back to Linux configuration Setup. Type "make menuconfig" in
directory /usr/src/linux.
Since system include file, /usr/src/linux/include/linux/interrupt.h,
is modified each time the MOXA driver is installed, kernel rebuilding
is inevitable. And it takes about 10 to 20 minutes depends on the
machine.
7. Make utility
# cd /moxa/mxser/utility
# make install
8. Make special file
3.5.6 Make tty device and special file
# cd /moxa/mxser/driver
# ./msmknod
9. Reboot
3.5.7 Make utility
# cd /moxa/mxser/utility
# make clean; make install
3.5 Custom configuration
3.5.8 Reboot
3.6 Custom configuration
Although this driver already provides you default configuration, you
still can change the device name and major number.The instruction to
still can change the device name and major number. The instruction to
change these parameters are shown as below.
Change Device name
@ -306,33 +403,37 @@ Content
2 free major numbers for this driver. There are 3 steps to change
major numbers.
1. Find free major numbers
3.6.1 Find free major numbers
In /proc/devices, you may find all the major numbers occupied
in the system. Please select 2 major numbers that are available.
e.g. 40, 45.
2. Create special files
3.6.2 Create special files
Run /moxa/mxser/driver/msmknod to create special files with
specified major numbers.
3. Modify driver with new major number
3.6.3 Modify driver with new major number
Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
contains "MXSERMAJOR". Change the content as below.
#define MXSERMAJOR 40
#define MXSERCUMAJOR 45
4. Run # make install in /moxa/mxser/driver.
3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
3.6 Verify driver installation
3.7 Verify driver installation
You may refer to /var/log/messages to check the latest status
log reported by this driver whenever it's activated.
-----------------------------------------------------------------------------
4. Utilities
There are 3 utilities contained in this driver. They are msdiag, msmon and
msterm. These 3 utilities are released in form of source code. They should
be compiled into executable file and copied into /usr/bin.
Before using these utilities, please load driver (refer 3.4 & 3.5) and
make sure you had run the "msmknod" utility.
msdiag - Diagnostic
--------------------
This utility provides the function to detect what Moxa Smartio multiport
board exists in the system.
This utility provides the function to display what Moxa Smartio/Industio
board found by driver in the system.
msmon - Port Monitoring
-----------------------
@ -353,12 +454,13 @@ Content
application, for example, sending AT command to a modem connected to the
port or used as a terminal for login purpose. Note that this is only a
dumb terminal emulation without handling full screen operation.
-----------------------------------------------------------------------------
5. Setserial
Supported Setserial parameters are listed as below.
uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
close_delay set the amount of time(in 1/100 of a second) that DTR
should be kept low while being closed.
closing_wait set the amount of time(in 1/100 of a second) that the
@ -366,7 +468,13 @@ Content
being closed, before the receiver is disable.
spd_hi Use 57.6kb when the application requests 38.4kb.
spd_vhi Use 115.2kb when the application requests 38.4kb.
spd_shi Use 230.4kb when the application requests 38.4kb.
spd_warp Use 460.8kb when the application requests 38.4kb.
spd_normal Use 38.4kb when the application requests 38.4kb.
spd_cust Use the custom divisor to set the speed when the
application requests 38.4kb.
divisor This option set the custom divison.
baud_base This option set the base baud rate.
-----------------------------------------------------------------------------
6. Troubleshooting
@ -375,8 +483,9 @@ Content
possible. If all the possible solutions fail, please contact our technical
support team to get more help.
Error msg: More than 4 Moxa Smartio family boards found. Fifth board and
after are ignored.
Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board
and after are ignored.
Solution:
To avoid this problem, please unplug fifth and after board, because Moxa
driver supports up to 4 boards.
@ -384,7 +493,7 @@ Content
Error msg: Request_irq fail, IRQ(?) may be conflict with another device.
Solution:
Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
which device causes the situation,please check /proc/interrupts to find
which device causes the situation, please check /proc/interrupts to find
free IRQ and simply change another free IRQ for Moxa board.
Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid.
@ -397,15 +506,18 @@ Content
Moxa ISA board needs an interrupt vector.Please refer to user's manual
"Hardware Installation" chapter to set interrupt vector.
Error msg: Couldn't install MOXA Smartio family driver!
Error msg: Couldn't install MOXA Smartio/Industio family driver!
Solution:
Load Moxa driver fail, the major number may conflict with other devices.
Please refer to previous section 3.5 to change a free major number for
Please refer to previous section 3.7 to change a free major number for
Moxa driver.
Error msg: Couldn't install MOXA Smartio family callout driver!
Error msg: Couldn't install MOXA Smartio/Industio family callout driver!
Solution:
Load Moxa callout driver fail, the callout device major number may
conflict with other devices. Please refer to previous section 3.5 to
conflict with other devices. Please refer to previous section 3.7 to
change a free callout device major number for Moxa driver.
-----------------------------------------------------------------------------

View file

@ -513,21 +513,11 @@ Additional Configurations
Intel(R) PRO/1000 PT Dual Port Server Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PF Dual Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
NAPI
----
NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled
or disabled based on the configuration of the kernel. To override
the default, use the following compile-time flags.
To enable NAPI, compile the driver module, passing in a configuration option:
make CFLAGS_EXTRA=-DE1000_NAPI install
To disable NAPI, compile the driver module, passing in a configuration option:
make CFLAGS_EXTRA=-DE1000_NO_NAPI install
NAPI (Rx polling mode) is enabled in the e1000 driver.
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.

View file

@ -148,7 +148,7 @@
getsockopt(sockfd, SOL_SOCKET, SO_NO_CHECK, &value, ...);
is meaningless (as in TCP). Packets with a zero checksum field are
illegal (cf. RFC 3828, sec. 3.1) will be silently discarded.
illegal (cf. RFC 3828, sec. 3.1) and will be silently discarded.
4) Fragmentation

View file

@ -1,5 +1,7 @@
00-INDEX
- This file
apm-acpi.txt
- basic info about the APM and ACPI support.
basic-pm-debugging.txt
- Debugging suspend and resume
devices.txt
@ -14,8 +16,6 @@ notifiers.txt
- Registering suspend notifiers in device drivers
pci.txt
- How the PCI Subsystem Does Power Management
pm.txt
- info on Linux power management support.
pm_qos_interface.txt
- info on Linux PM Quality of Service interface
power_supply_class.txt

View file

@ -0,0 +1,32 @@
APM or ACPI?
------------
If you have a relatively recent x86 mobile, desktop, or server system,
odds are it supports either Advanced Power Management (APM) or
Advanced Configuration and Power Interface (ACPI). ACPI is the newer
of the two technologies and puts power management in the hands of the
operating system, allowing for more intelligent power management than
is possible with BIOS controlled APM.
The best way to determine which, if either, your system supports is to
build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
enabled by default). If a working ACPI implementation is found, the
ACPI driver will override and disable APM, otherwise the APM driver
will be used.
No, sorry, you cannot have both ACPI and APM enabled and running at
once. Some people with broken ACPI or broken APM implementations
would like to use both to get a full set of working features, but you
simply cannot mix and match the two. Only one power management
interface can be in control of the machine at once. Think about it..
User-space Daemons
------------------
Both APM and ACPI rely on user-space daemons, apmd and acpid
respectively, to be completely functional. Obtain both of these
daemons from your Linux distribution or from the Internet (see below)
and be sure that they are started sometime in the system boot process.
Go ahead and start both. If ACPI or APM is not available on your
system the associated daemon will exit gracefully.
apmd: http://worldvisions.ca/~apenwarr/apmd/
acpid: http://acpid.sf.net/

View file

@ -1,257 +0,0 @@
Linux Power Management Support
This document briefly describes how to use power management with your
Linux system and how to add power management support to Linux drivers.
APM or ACPI?
------------
If you have a relatively recent x86 mobile, desktop, or server system,
odds are it supports either Advanced Power Management (APM) or
Advanced Configuration and Power Interface (ACPI). ACPI is the newer
of the two technologies and puts power management in the hands of the
operating system, allowing for more intelligent power management than
is possible with BIOS controlled APM.
The best way to determine which, if either, your system supports is to
build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
enabled by default). If a working ACPI implementation is found, the
ACPI driver will override and disable APM, otherwise the APM driver
will be used.
No, sorry, you cannot have both ACPI and APM enabled and running at
once. Some people with broken ACPI or broken APM implementations
would like to use both to get a full set of working features, but you
simply cannot mix and match the two. Only one power management
interface can be in control of the machine at once. Think about it..
User-space Daemons
------------------
Both APM and ACPI rely on user-space daemons, apmd and acpid
respectively, to be completely functional. Obtain both of these
daemons from your Linux distribution or from the Internet (see below)
and be sure that they are started sometime in the system boot process.
Go ahead and start both. If ACPI or APM is not available on your
system the associated daemon will exit gracefully.
apmd: http://worldvisions.ca/~apenwarr/apmd/
acpid: http://acpid.sf.net/
Driver Interface -- OBSOLETE, DO NOT USE!
----------------*************************
Note: pm_register(), pm_access(), pm_dev_idle() and friends are
obsolete. Please do not use them. Instead you should properly hook
your driver into the driver model, and use its suspend()/resume()
callbacks to do this kind of stuff.
If you are writing a new driver or maintaining an old driver, it
should include power management support. Without power management
support, a single driver may prevent a system with power management
capabilities from ever being able to suspend (safely).
Overview:
1) Register each instance of a device with "pm_register"
2) Call "pm_access" before accessing the hardware.
(this will ensure that the hardware is awake and ready)
3) Your "pm_callback" is called before going into a
suspend state (ACPI D1-D3) or after resuming (ACPI D0)
from a suspend.
4) Call "pm_dev_idle" when the device is not being used
(optional but will improve device idle detection)
5) When unloaded, unregister the device with "pm_unregister"
/*
* Description: Register a device with the power-management subsystem
*
* Parameters:
* type - device type (PCI device, system device, ...)
* id - instance number or unique identifier
* cback - request handler callback (suspend, resume, ...)
*
* Returns: Registered PM device or NULL on error
*
* Examples:
* dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback);
*
* struct pci_dev *pci_dev = pci_find_dev(...);
* dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback);
*/
struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback);
/*
* Description: Unregister a device with the power management subsystem
*
* Parameters:
* dev - PM device previously returned from pm_register
*/
void pm_unregister(struct pm_dev *dev);
/*
* Description: Unregister all devices with a matching callback function
*
* Parameters:
* cback - previously registered request callback
*
* Notes: Provided for easier porting from old APM interface
*/
void pm_unregister_all(pm_callback cback);
/*
* Power management request callback
*
* Parameters:
* dev - PM device previously returned from pm_register
* rqst - request type
* data - data, if any, associated with the request
*
* Returns: 0 if the request is successful
* EINVAL if the request is not supported
* EBUSY if the device is now busy and cannot handle the request
* ENOMEM if the device was unable to handle the request due to memory
*
* Details: The device request callback will be called before the
* device/system enters a suspend state (ACPI D1-D3) or
* or after the device/system resumes from suspend (ACPI D0).
* For PM_SUSPEND, the ACPI D-state being entered is passed
* as the "data" argument to the callback. The device
* driver should save (PM_SUSPEND) or restore (PM_RESUME)
* device context when the request callback is called.
*
* Once a driver returns 0 (success) from a suspend
* request, it should not process any further requests or
* access the device hardware until a call to "pm_access" is made.
*/
typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
Driver Details
--------------
This is just a quick Q&A as a stopgap until a real driver writers'
power management guide is available.
Q: When is a device suspended?
Devices can be suspended based on direct user request (eg. laptop lid
closes), system power policy (eg. sleep after 30 minutes of console
inactivity), or device power policy (eg. power down device after 5
minutes of inactivity)
Q: Must a driver honor a suspend request?
No, a driver can return -EBUSY from a suspend request and this
will stop the system from suspending. When a suspend request
fails, all suspended devices are resumed and the system continues
to run. Suspend can be retried at a later time.
Q: Can the driver block suspend/resume requests?
Yes, a driver can delay its return from a suspend or resume
request until the device is ready to handle requests. It
is advantageous to return as quickly as possible from a
request as suspend/resume are done serially.
Q: What context is a suspend/resume initiated from?
A suspend or resume is initiated from a kernel thread context.
It is safe to block, allocate memory, initiate requests
or anything else you can do within the kernel.
Q: Will requests continue to arrive after a suspend?
Possibly. It is the driver's responsibility to queue(*),
fail, or drop any requests that arrive after returning
success to a suspend request. It is important that the
driver not access its device until after it receives
a resume request as the device's bus may no longer
be active.
(*) If a driver queues requests for processing after
resume be aware that the device, network, etc.
might be in a different state than at suspend time.
It's probably better to drop requests unless
the driver is a storage device.
Q: Do I have to manage bus-specific power management registers
No. It is the responsibility of the bus driver to manage
PCI, USB, etc. power management registers. The bus driver
or the power management subsystem will also enable any
wake-on functionality that the device has.
Q: So, really, what do I need to do to support suspend/resume?
You need to save any device context that would
be lost if the device was powered off and then restore
it at resume time. When ACPI is active, there are
three levels of device suspend states; D1, D2, and D3.
(The suspend state is passed as the "data" argument
to the device callback.) With D3, the device is powered
off and loses all context, D1 and D2 are shallower power
states and require less device context to be saved. To
play it safe, just save everything at suspend and restore
everything at resume.
Q: Where do I store device context for suspend?
Anywhere in memory, kmalloc a buffer or store it
in the device descriptor. You are guaranteed that the
contents of memory will be restored and accessible
before resume, even when the system suspends to disk.
Q: What do I need to do for ACPI vs. APM vs. etc?
Drivers need not be aware of the specific power management
technology that is active. They just need to be aware
of when the overlying power management system requests
that they suspend or resume.
Q: What about device dependencies?
When a driver registers a device, the power management
subsystem uses the information provided to build a
tree of device dependencies (eg. USB device X is on
USB controller Y which is on PCI bus Z) When power
management wants to suspend a device, it first sends
a suspend request to its driver, then the bus driver,
and so on up to the system bus. Device resumes
proceed in the opposite direction.
Q: Who do I contact for additional information about
enabling power management for my specific driver/device?
ACPI Development mailing list: linux-acpi@vger.kernel.org
System Interface -- OBSOLETE, DO NOT USE!
----------------*************************
If you are providing new power management support to Linux (ie.
adding support for something like APM or ACPI), you should
communicate with drivers through the existing generic power
management interface.
/*
* Send a request to all devices
*
* Parameters:
* rqst - request type
* data - data, if any, associated with the request
*
* Returns: 0 if the request is successful
* See "pm_callback" return for errors
*
* Details: Walk list of registered devices and call pm_send
* for each until complete or an error is encountered.
* If an error is encountered for a suspend request,
* return all devices to the state they were in before
* the suspend request.
*/
int pm_send_all(pm_request_t rqst, void *data);
/*
* Find a matching device
*
* Parameters:
* type - device type (PCI device, system device, or 0 to match all devices)
* from - previous match or NULL to start from the beginning
*
* Returns: Matching device or NULL if none found
*/
struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from);

View file

@ -59,6 +59,7 @@ Table of Contents
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
r) MDIO on GPIOs
s) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@ -89,10 +90,12 @@ Table of Contents
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
VIII - Specifying GPIO information for devices
IX - Specifying GPIO information for devices
1) gpios property
2) gpio-controller nodes
X - Specifying device power management information (sleep property)
Appendix A - Sample SOC node for MPC8540
@ -1881,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model.
&qe_pio_c 6>;
};
s) SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
discussion, it is assumed that the system's SPI controller is in
SPI master mode. This binding does not describe SPI controllers
in slave mode.
The SPI master node requires the following properties:
- #address-cells - number of cells required to define a chip select
address on the SPI bus.
- #size-cells - should be zero.
- compatible - name of SPI bus controller following generic names
recommended practice.
No other properties are required in the SPI bus node. It is assumed
that a driver for an SPI bus device will understand that it is an SPI bus.
However, the binding does not attempt to define the specific method for
assigning chip select numbers. Since SPI chip select configuration is
flexible and non-standardized, it is left out of this binding with the
assumption that board specific platform code will be used to manage
chip selects. Individual drivers can define additional properties to
support describing the chip select layout.
SPI slave nodes must be children of the SPI master node and can
contain the following properties.
- reg - (required) chip select address of device.
- compatible - (required) name of SPI device following generic names
recommended practice
- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- spi-cpol - (optional) Empty property indicating device requires
inverse clock polarity (CPOL) mode
- spi-cpha - (optional) Empty property indicating device requires
shifted clock phase (CPHA) mode
SPI example for an MPC5200 SPI bus:
spi@f00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
ethernet-switch@0 {
compatible = "micrel,ks8995m";
spi-max-frequency = <1000000>;
reg = <0>;
};
codec@1 {
compatible = "ti,tlv320aic26";
spi-max-frequency = <100000>;
reg = <1>;
};
};
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
@ -2488,8 +2547,8 @@ encodings listed below:
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
VIII - Specifying GPIO information for devices
==============================================
IX - Specifying GPIO information for devices
============================================
1) gpios property
-----------------
@ -2537,116 +2596,151 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
gpio-controller;
};
X - Specifying Device Power Management Information (sleep property)
===================================================================
Devices on SOCs often have mechanisms for placing devices into low-power
states that are decoupled from the devices' own register blocks. Sometimes,
this information is more complicated than a cell-index property can
reasonably describe. Thus, each device controlled in such a manner
may contain a "sleep" property which describes these connections.
The sleep property consists of one or more sleep resources, each of
which consists of a phandle to a sleep controller, followed by a
controller-specific sleep specifier of zero or more cells.
The semantics of what type of low power modes are possible are defined
by the sleep controller. Some examples of the types of low power modes
that may be supported are:
- Dynamic: The device may be disabled or enabled at any time.
- System Suspend: The device may request to be disabled or remain
awake during system suspend, but will not be disabled until then.
- Permanent: The device is disabled permanently (until the next hard
reset).
Some devices may share a clock domain with each other, such that they should
only be suspended when none of the devices are in use. Where reasonable,
such nodes should be placed on a virtual bus, where the bus has the sleep
property. If the clock domain is shared among devices that cannot be
reasonably grouped in this manner, then create a virtual sleep controller
(similar to an interrupt nexus, except that defining a standardized
sleep-map should wait until its necessity is demonstrated).
Appendix A - Sample SOC node for MPC8540
========================================
Note that the #address-cells and #size-cells for the SoC node
in this example have been explicitly listed; these are likely
not necessary as they are usually the same as the root node.
soc8540@e0000000 {
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8540-ccsr", "simple-bus";
device_type = "soc";
ranges = <00000000 e0000000 00100000>
reg = <e0000000 00003000>;
ranges = <0x00000000 0xe0000000 0x00100000>
bus-frequency = <0>;
mdio@24520 {
reg = <24520 20>;
device_type = "mdio";
compatible = "gianfar";
ethernet-phy@0 {
linux,phandle = <2452000>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452002>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
interrupt-parent = <&pic>;
ethernet@24000 {
#size-cells = <0>;
#address-cells = <1>;
#size-cells = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
compatible = "gianfar", "simple-bus";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <29 2 30 2 34 2>;
phy-handle = <&phy0>;
sleep = <&pmc 00000080>;
ranges;
mdio@24520 {
reg = <0x24520 0x20>;
compatible = "fsl,gianfar-mdio";
phy0: ethernet-phy@0 {
interrupts = <5 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <7 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 3 14 3 18 3>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
reg = <0x25000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
phy-handle = <&phy1>;
sleep = <&pmc 00000040>;
};
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
reg = <26000 1000>;
mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 3>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
reg = <0x26000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <41 2>;
phy-handle = <&phy3>;
sleep = <&pmc 00000020>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <1a 3>;
interrupt-parent = <40000>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8540-duart", "simple-bus";
sleep = <&pmc 00000002>;
ranges;
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
};
};
pic@40000 {
linux,phandle = <40000>;
pic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
reg = <40000 40000>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
i2c@3000 {
interrupt-parent = <40000>;
interrupts = <1b 3>;
reg = <3000 18>;
device_type = "i2c";
interrupts = <43 2>;
reg = <0x3000 0x100>;
compatible = "fsl-i2c";
dfsrr;
sleep = <&pmc 00000004>;
};
pmc: power@e0070 {
compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc";
reg = <0xe0070 0x20>;
};
};

View file

@ -0,0 +1,38 @@
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
On CPM1 devices, all ports are using slightly different register layouts.
Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
On CPM2 devices, all ports are 32bit ports and use a common register layout.
Required properties:
- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
"fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
"fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional paramters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example of three SOC GPIO banks defined as gpio-controller nodes:
CPM1_PIO_A: gpio-controller@950 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-a";
reg = <0x950 0x10>;
gpio-controller;
};
CPM1_PIO_B: gpio-controller@ab8 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-b";
reg = <0xab8 0x10>;
gpio-controller;
};
CPM1_PIO_E: gpio-controller@ac8 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-e";
reg = <0xac8 0x18>;
gpio-controller;
};

View file

@ -1,22 +1,37 @@
* USB (Universal Serial Bus Controller)
Freescale QUICC Engine USB Controller
Required properties:
- compatible : could be "qe_udc" or "fhci-hcd".
- mode : the could be "host" or "slave".
- reg : Offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
- reg : the first two cells should contain usb registers location and
length, the next two two cells should contain PRAM location and
length.
- interrupts : should contain USB interrupt.
- interrupt-parent : interrupt source phandle.
- fsl,fullspeed-clock : specifies the full speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
"clk1" through "clk24": clock source is CLK1-CLK24, respectively
- fsl,lowspeed-clock : specifies the low speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
"clk1" through "clk24": clock source is CLK1-CLK24, respectively
- hub-power-budget : USB power budget for the root hub, in mA.
- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
USBRN, SPEED (optional), and POWER (optional).
Example(slave):
usb@6c0 {
compatible = "qe_udc";
reg = <6c0 40>;
interrupts = <8b 0>;
interrupt-parent = <700>;
mode = "slave";
};
Example:
usb@6c0 {
compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk21";
gpios = <&qe_pio_b 2 0 /* USBOE */
&qe_pio_b 3 0 /* USBTP */
&qe_pio_b 8 0 /* USBTN */
&qe_pio_b 9 0 /* USBRP */
&qe_pio_b 11 0 /* USBRN */
&qe_pio_e 20 0 /* SPEED */
&qe_pio_e 21 0 /* POWER */>;
};

View file

@ -0,0 +1,17 @@
Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
Required properties:
- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx".
- reg : should specify I2C address (0x0a).
- #gpio-cells : should be 2.
- gpio-controller : should be present.
Example:
mcu@0a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8349emitx",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};

View file

@ -0,0 +1,63 @@
* Power Management Controller
Properties:
- compatible: "fsl,<chip>-pmc".
"fsl,mpc8349-pmc" should be listed for any chip whose PMC is
compatible. "fsl,mpc8313-pmc" should also be listed for any chip
whose PMC is compatible, and implies deep-sleep capability.
"fsl,mpc8548-pmc" should be listed for any chip whose PMC is
compatible. "fsl,mpc8536-pmc" should also be listed for any chip
whose PMC is compatible, and implies deep-sleep capability.
"fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
compatible; all statements below that apply to "fsl,mpc8548-pmc" also
apply to "fsl,mpc8641d-pmc".
Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
bit assigments are indicated via the sleep specifier in each device's
sleep property.
- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
is the PMC block, and the second resource is the Clock Configuration
block.
For devices compatible with "fsl,mpc8548-pmc", the first resource
is a 32-byte block beginning with DEVDISR.
- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
resource is the PMC block interrupt.
- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
a wakeup source from deep sleep.
Sleep specifiers:
fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit
that is set in the cell, the corresponding bit in SCCR will be saved
and cleared on suspend, and restored on resume. This sleep controller
supports disabling and resuming devices at any time.
fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
which will be ORed into PMCDR upon suspend, and cleared from PMCDR
upon resume. The first two cells are as described for fsl,mpc8578-pmc.
This sleep controller only supports disabling devices during system
sleep, or permanently.
fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
first of which will be ORed into DEVDISR (and the second into
DEVDISR2, if present -- this cell should be zero or absent if the
hardware does not have DEVDISR2) upon a request for permanent device
disabling. This sleep controller does not support configuring devices
to disable during system sleep (unless supported by another compatible
match), or dynamically.
Example:
power@b00 {
compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 8>;
};

View file

@ -24,46 +24,39 @@ Example:
* Gianfar-compatible ethernet nodes
Required properties:
Properties:
- device_type : Should be "network"
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- mac-address : List of bytes representing the ethernet address of
- local-mac-address : List of bytes representing the ethernet address of
this controller
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- interrupts : For FEC devices, the first interrupt is the device's
interrupt. For TSEC and eTSEC devices, the first interrupt is
transmit, the second is receive, and the third is error.
- phy-handle : The phandle for the PHY connected to this ethernet
controller.
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
but unique to the all specified fixed-links, b is duplex - 0 half,
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
Recommended properties:
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection
is of type "rgmii-id", as all other connection types are detected by
hardware.
- fsl,magic-packet : If present, indicates that the hardware supports
waking up via magic packet.
Example:
ethernet@24000 {
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>
reg = <0x24000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>
};

View file

@ -0,0 +1,28 @@
Freescale Localbus UPM programmed to work with NAND flash
Required properties:
- compatible : "fsl,upm-nand".
- reg : should specify localbus chip select and size used for the chip.
- fsl,upm-addr-offset : UPM pattern offset for the address latch.
- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin.
Example:
upm@1,0 {
compatible = "fsl,upm-nand";
reg = <1 0 1>;
fsl,upm-addr-offset = <16>;
fsl,upm-cmd-offset = <8>;
gpios = <&qe_pio_e 18 0>;
flash {
#address-cells = <1>;
#size-cells = <1>;
compatible = "...";
partition@0 {
...
};
};
};

View file

@ -0,0 +1,15 @@
LED connected to GPIO
Required properties:
- compatible : should be "gpio-led".
- label : (optional) the label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
- gpios : should specify LED GPIO.
Example:
led@0 {
compatible = "gpio-led";
label = "hdd";
gpios = <&mcu_pio 0 1>;
};

View file

@ -42,7 +42,7 @@
<sect1><title>Device Components</title>
!Esound/core/device.c
</sect1>
<sect1><title>KMOD and Device File Entries</title>
<sect1><title>Module requests and Device File Entries</title>
!Esound/core/sound.c
</sect1>
<sect1><title>Memory Management Helpers</title>

View file

@ -270,8 +270,8 @@ The pinout of the connectors on the IO8+ is:
Hardware handshaking issues.
============================
The driver can be compiled in two different ways. The default
("Specialix DTR/RTS pin is RTS" is off) the pin behaves as DTR when
The driver can be told to operate in two different ways. The default
behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when
hardware handshaking is off. It behaves as the RTS hardware
handshaking signal when hardware handshaking is selected.
@ -280,7 +280,7 @@ cable will either be compatible with hardware handshaking or with
software handshaking. So switching on the fly is not really an
option.
I actually prefer to use the "Specialix DTR/RTS pin is RTS" option.
I actually prefer to use the "specialix.sx_rtscts=1" option.
This makes the DTR/RTS pin always an RTS pin, and ioctls to
change DTR are always ignored. I have a cable that is configured
for this.
@ -379,7 +379,5 @@ it doesn't fit in your computer, bring back the card.
You have to WRITE to the address register to even
read-probe a CD186x register. Disable autodetection?
-- Specialix: any suggestions?
- Arbitrary baud rates are not implemented yet.
If you need this, bug me about it.

View file

@ -3,9 +3,8 @@ Rules on how to access information in the Linux kernel sysfs
The kernel-exported sysfs exports internal kernel implementation details
and depends on internal kernel structures and layout. It is agreed upon
by the kernel developers that the Linux kernel does not provide a stable
internal API. As sysfs is a direct export of kernel internal
structures, the sysfs interface cannot provide a stable interface either;
it may always change along with internal kernel changes.
internal API. Therefore, there are aspects of the sysfs interface that
may not be stable across kernel releases.
To minimize the risk of breaking users of sysfs, which are in most cases
low-level userspace applications, with a new kernel release, the users

View file

@ -305,21 +305,14 @@ driver, like this:
which will result in the needed drivers getting loaded automatically.
g. if you are planning on using kerneld to automatically load the
module for you, then you need to edit /etc/conf.modules and add the
g. if you are planning on having the kernel automatically request
the module for you, then you need to edit /etc/conf.modules and add the
following lines:
options ixj dspio=0x340 xio=0x330 ixjdebug=0
If you do this, then when you execute an application that uses the
module kerneld will load the module for you. Note that to do this,
you need to have your kernel set to support kerneld. You can check
for this by looking at /usr/src/linux/.config and you should see this:
# Loadable module support
#
<snip>
CONFIG_KMOD=y
module the kernel will request that it is loaded.
h. if you want non-root users to be able to read and write to the
ixj devices (this is a good idea!) you should do the following:

View file

@ -218,9 +218,35 @@ If use of such macros is not convenient, another option is to use memcpy(),
where the source or destination (or both) are of type u8* or unsigned char*.
Due to the byte-wise nature of this operation, unaligned accesses are avoided.
--
Author: Daniel Drake <dsd@gentoo.org>
With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock,
Uli Kunitz, Vadim Lobanov
Alignment vs. Networking
========================
On architectures that require aligned loads, networking requires that the IP
header is aligned on a four-byte boundary to optimise the IP stack. For
regular ethernet hardware, the constant NET_IP_ALIGN is used. On most
architectures this constant has the value 2 because the normal ethernet
header is 14 bytes long, so in order to get proper alignment one needs to
DMA to an address which can be expressed as 4*n + 2. One notable exception
here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned
addresses can be very expensive and dwarf the cost of unaligned loads.
For some ethernet hardware that cannot DMA to unaligned addresses like
4*n+2 or non-ethernet hardware, this can be a problem, and it is then
required to copy the incoming frame into an aligned buffer. Because this is
unnecessary on architectures that can do unaligned accesses, the code can be
made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so:
#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
skb = original skb
#else
skb = copy skb
#endif
--
Authors: Daniel Drake <dsd@gentoo.org>,
Johannes Berg <johannes@sipsolutions.net>
With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
Vadim Lobanov

View file

@ -193,9 +193,6 @@ Description: Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled.
loads that module automatically. This action is performed as
once soon as the 'w9968cf' module is loaded into memory.
Default: 1
Note: The kernel must be compiled with the CONFIG_KMOD option
enabled for the 'ovcamchip' module to be loaded and for
this parameter to be present.
-------------------------------------------------------------------------------
Name: simcams
Type: int

View file

@ -95,6 +95,29 @@ this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
With support for multiple hugepage pools at run-time available, much of
the hugepage userspace interface has been duplicated in sysfs. The above
information applies to the default hugepage size (which will be
controlled by the proc interfaces for backwards compatibility). The root
hugepage control directory is
/sys/kernel/mm/hugepages
For each hugepage size supported by the running kernel, a subdirectory
will exist, of the form
hugepages-${size}kB
Inside each of these directories, the same set of files will exist:
nr_hugepages
nr_overcommit_hugepages
free_hugepages
resv_hugepages
surplus_hugepages
which function as described above for the default hugepage-sized case.
If the user applications are going to request hugepages using mmap system
call, then it is required that system administrator mount a file system of
type hugetlbfs:

View file

@ -441,10 +441,7 @@ M: spyro@f2s.com
S: Maintained
ARM PRIMECELL MMCI PL180/1 DRIVER
P: Russell King
M: rmk@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
S: Orphan
ARM/ADI ROADRUNNER MACHINE SUPPORT
P: Lennert Buytenhek
@ -483,11 +480,28 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CORGI MACHINE SUPPORT
P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
P: Stefan Schmidt
M: stefan@openezx.org
P: Harald Welte
M: laforge@openezx.org
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
P: Lennert Buytenhek
M: kernel@wantstofly.org
@ -575,10 +589,18 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/TOSA MACHINE SUPPORT
P: Dmitry Baryshkov
M: dbaryshkov@gmail.com
P: Dirk Opfer
M: dirk@opfer-online.de
S: Maintained
ARM/PALMTX SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
W: http://hackndev.com
S: Maintained
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au
@ -1021,6 +1043,12 @@ M: fujita.tomonori@lab.ntt.co.jp
L: linux-scsi@vger.kernel.org
S: Supported
BT8XXGPIO DRIVER
P: Michael Buesch
M: mb@bu3sch.de
W: http://bu3sch.de/btgpio.php
S: Maintained
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
@ -1962,7 +1990,7 @@ P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
S: Odd Fixes
HPET: High Precision Event Timers driver (hpet.c)
HPET: High Precision Event Timers driver (drivers/char/hpet.c)
P: Clemens Ladisch
M: clemens@ladisch.de
S: Maintained
@ -2915,8 +2943,6 @@ P: Faisal Latif
M: flatif@neteffect.com
P: Chien Tung
M: ctung@neteffect.com
P: Glenn Streiff
M: gstreiff@neteffect.com
L: general@lists.openfabrics.org
W: http://www.neteffect.com
S: Supported
@ -3533,7 +3559,7 @@ S: Supported
S390 NETWORK DRIVERS
P: Ursula Braun
M: ubraun@linux.vnet.ibm.com
M: ursula.braun@de.ibm.com
P: Frank Blaschka
M: blaschka@linux.vnet.ibm.com
M: linux390@de.ibm.com
@ -3553,7 +3579,7 @@ S: Supported
S390 IUCV NETWORK LAYER
P: Ursula Braun
M: ubraun@linux.vnet.ibm.com
M: ursula.braun@de.ibm.com
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
@ -4047,9 +4073,10 @@ W: http://www.buzzard.org.uk/toshiba/
S: Maintained
TPM DEVICE DRIVER
P: Debora Velarde
P: Rajiv Andrade
M: tpmdd-devel@lists.sourceforge.net
P: Debora Velarde
M: debora@linux.vnet.ibm.com
P: Rajiv Andrade
M: srajiv@linux.vnet.ibm.com
W: http://tpmdd.sourceforge.net
P: Marcel Selhorst
M: tpm@selhorst.net
@ -4057,12 +4084,6 @@ W: http://www.prosec.rub.de/tpm/
L: tpmdd-devel@lists.sourceforge.net
S: Maintained
TRIDENT 4DWAVE/SIS 7018 PCI AUDIO CORE
P: Muli Ben-Yehuda
M: mulix@mulix.org
L: linux-kernel@vger.kernel.org
S: Maintained
TRIVIAL PATCHES
P: Jesper Juhl
M: trivial@kernel.org
@ -4108,9 +4129,6 @@ W: http://www.uclinux.org/
L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
UCLINUX FOR NEC V850
P: Miles Bader
UCLINUX FOR RENESAS H8/300
P: Yoshinori Sato
M: ysato@users.sourceforge.jp

View file

@ -1061,6 +1061,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
# Target to prepare building external modules
@ -1148,7 +1149,8 @@ clean: archclean $(clean-dirs)
@find . $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.symtypes' -o -name 'modules.order' \) \
-o -name '*.symtypes' -o -name 'modules.order' \
-o -name 'Module.markers' \) \
-type f -print | xargs rm -f
# mrproper - Delete all generated files, including .config

View file

@ -27,10 +27,32 @@ config KPROBES
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
config HAVE_EFFICIENT_UNALIGNED_ACCESS
def_bool n
help
Some architectures are unable to perform unaligned accesses
without the use of get_unaligned/put_unaligned. Others are
unable to perform such accesses efficiently (e.g. trap on
unaligned access and require fixing it up in the exception
handler.)
This symbol should be selected by an architecture if it can
perform unaligned accesses efficiently to allow different
code paths to be selected for these cases. Some network
drivers, for example, could opt to not fix up alignment
problems with received packets if doing so would not help
much.
See Documentation/unaligned-memory-access.txt for more
information on the topic of unaligned memory accesses.
config KRETPROBES
def_bool y
depends on KPROBES && HAVE_KRETPROBES
config HAVE_IOREMAP_PROT
def_bool n
config HAVE_KPROBES
def_bool n
@ -42,3 +64,10 @@ config HAVE_DMA_ATTRS
config USE_GENERIC_SMP_HELPERS
def_bool n
config HAVE_CLK
def_bool n
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.

View file

@ -333,11 +333,6 @@ config PCI_SYSCALL
config IOMMU_HELPER
def_bool PCI
config ALPHA_CORE_AGP
bool
depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
default y
config ALPHA_NONAME
bool
depends on ALPHA_BOOK1 || ALPHA_NONAME_CH

View file

@ -78,8 +78,6 @@ static unsigned outcnt; /* bytes in output buffer */
static int fill_inbuf(void);
static void flush_window(void);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
static char *input_data;
static int input_data_size;
@ -88,51 +86,18 @@ static uch *output_data;
static ulg output_ptr;
static ulg bytes_out;
static void *malloc(int size);
static void free(void *where);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
extern int end;
static ulg free_mem_ptr;
static ulg free_mem_ptr_end;
static ulg free_mem_end_ptr;
#define HEAP_SIZE 0x3000
#include "../../../lib/inflate.c"
static void *malloc(int size)
{
void *p;
if (size <0) error("Malloc error");
if (free_mem_ptr <= 0) error("Memory error");
free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
p = (void *)free_mem_ptr;
free_mem_ptr += size;
if (free_mem_ptr >= free_mem_ptr_end)
error("Out of memory");
return p;
}
static void free(void *where)
{ /* gzip_mark & gzip_release do the free */
}
static void gzip_mark(void **ptr)
{
*ptr = (void *) free_mem_ptr;
}
static void gzip_release(void **ptr)
{
free_mem_ptr = (long) *ptr;
}
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
@ -193,7 +158,7 @@ decompress_kernel(void *output_start,
/* FIXME FIXME FIXME */
free_mem_ptr = (ulg)output_start + ksize;
free_mem_ptr_end = (ulg)output_start + ksize + 0x200000;
free_mem_end_ptr = (ulg)output_start + ksize + 0x200000;
/* FIXME FIXME FIXME */
/* put in temp area to reduce initial footprint */

View file

@ -19,7 +19,6 @@
#include <asm/pgalloc.h>
pg_data_t node_data[MAX_NUMNODES];
bootmem_data_t node_bdata[MAX_NUMNODES];
EXPORT_SYMBOL(node_data);
#undef DEBUG_DISCONTIG
@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end)
printk(" not enough mem to reserve NODE_DATA");
return;
}
NODE_DATA(nid)->bdata = &node_bdata[nid];
NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
printk(" Detected node memory: start %8lu, end %8lu\n",
node_min_pfn, node_max_pfn);
@ -304,8 +303,9 @@ void __init paging_init(void)
dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
for_each_online_node(nid) {
unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT;
unsigned long end_pfn = node_bdata[nid].node_low_pfn;
bootmem_data_t *bdata = &bootmem_node_data[nid];
unsigned long start_pfn = bdata->node_min_pfn;
unsigned long end_pfn = bdata->node_low_pfn;
if (dma_local_pfn >= end_pfn - start_pfn)
zones_size[ZONE_DMA] = end_pfn - start_pfn;
@ -313,7 +313,7 @@ void __init paging_init(void)
zones_size[ZONE_DMA] = dma_local_pfn;
zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
}
free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL);
free_area_init_node(nid, zones_size, start_pfn, NULL);
}
/* Initialize the kernel's ZERO_PGE. */

View file

@ -12,6 +12,7 @@ config ARM
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FTRACE if (!XIP_KERNEL)
@ -197,12 +198,14 @@ choice
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
select ARM_AMBA
select HAVE_CLK
help
This enables support for systems based on the Agilent AAEC-2000
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select HAVE_CLK
select ICST525
help
Support for ARM's Integrator platform.
@ -210,6 +213,7 @@ config ARCH_INTEGRATOR
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARM_AMBA
select HAVE_CLK
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
@ -220,6 +224,7 @@ config ARCH_VERSATILE
bool "ARM Ltd. Versatile family"
select ARM_AMBA
select ARM_VIC
select HAVE_CLK
select ICST307
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
@ -261,7 +266,9 @@ config ARCH_EP93XX
select ARM_AMBA
select ARM_VIC
select GENERIC_GPIO
select HAVE_GPIO_LIB
select HAVE_CLK
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
help
This enables support for the Cirrus EP93xx series of CPUs.
@ -380,6 +387,7 @@ config ARCH_NS9XXX
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
help
Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
System.
@ -429,6 +437,7 @@ config ARCH_ORION5X
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select HAVE_CLK
help
This enables support for Philips PNX4008 mobile platform.
@ -437,7 +446,8 @@ config ARCH_PXA
depends on MMU
select ARCH_MTD_XIP
select GENERIC_GPIO
select HAVE_GPIO_LIB
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
@ -467,14 +477,16 @@ config ARCH_SA1100
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select TICK_ONESHOT
select HAVE_GPIO_LIB
select ARCH_REQUIRE_GPIOLIB
help
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
select HAVE_CLK
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@ -502,13 +514,15 @@ config ARCH_DAVINCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select GENERIC_GPIO
select HAVE_CLK
help
Support for TI's DaVinci platform.
config ARCH_OMAP
bool "TI OMAP"
select GENERIC_GPIO
select HAVE_GPIO_LIB
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help

View file

@ -217,8 +217,6 @@ static unsigned outcnt; /* bytes in output buffer */
static int fill_inbuf(void);
static void flush_window(void);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
extern char input_data[];
extern char input_data_end[];
@ -227,65 +225,22 @@ static uch *output_data;
static ulg output_ptr;
static ulg bytes_out;
static void *malloc(int size);
static void free(void *where);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
static void putstr(const char *);
extern int end;
static ulg free_mem_ptr;
static ulg free_mem_ptr_end;
static ulg free_mem_end_ptr;
#define HEAP_SIZE 0x3000
#ifdef STANDALONE_DEBUG
#define NO_INFLATE_MALLOC
#endif
#define ARCH_HAS_DECOMP_WDOG
#include "../../../../lib/inflate.c"
#ifndef STANDALONE_DEBUG
static void *malloc(int size)
{
void *p;
if (size <0) error("Malloc error");
if (free_mem_ptr <= 0) error("Memory error");
free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
p = (void *)free_mem_ptr;
free_mem_ptr += size;
if (free_mem_ptr >= free_mem_ptr_end)
error("Out of memory");
return p;
}
static void free(void *where)
{ /* gzip_mark & gzip_release do the free */
}
static void gzip_mark(void **ptr)
{
arch_decomp_wdog();
*ptr = (void *) free_mem_ptr;
}
static void gzip_release(void **ptr)
{
arch_decomp_wdog();
free_mem_ptr = (long) *ptr;
}
#else
static void gzip_mark(void **ptr)
{
}
static void gzip_release(void **ptr)
{
}
#endif
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
{
output_data = (uch *)output_start; /* Points to kernel start */
free_mem_ptr = free_mem_ptr_p;
free_mem_ptr_end = free_mem_ptr_end_p;
free_mem_end_ptr = free_mem_ptr_end_p;
__machine_arch_type = arch_id;
arch_decomp_setup();

View file

@ -554,9 +554,8 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
if (!device_info) {
printk(KERN_ERR
"Could not allocated dmabounce_device_info for %s",
dev->bus_id);
dev_err(dev,
"Could not allocated dmabounce_device_info\n");
return -ENOMEM;
}
@ -594,8 +593,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
dev->archdata.dmabounce = device_info;
printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
dev->bus_id, dev->bus->name);
dev_info(dev, "dmabounce: registered device\n");
return 0;
@ -614,16 +612,15 @@ dmabounce_unregister_dev(struct device *dev)
dev->archdata.dmabounce = NULL;
if (!device_info) {
printk(KERN_WARNING
"%s: Never registered with dmabounce but attempting" \
"to unregister!\n", dev->bus_id);
dev_warn(dev,
"Never registered with dmabounce but attempting"
"to unregister!\n");
return;
}
if (!list_empty(&device_info->safe_buffers)) {
printk(KERN_ERR
"%s: Removing from dmabounce with pending buffers!\n",
dev->bus_id);
dev_err(dev,
"Removing from dmabounce with pending buffers!\n");
BUG();
}
@ -639,8 +636,7 @@ dmabounce_unregister_dev(struct device *dev)
kfree(device_info);
printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
dev->bus_id, dev->bus->name);
dev_info(dev, "dmabounce: device unregistered\n");
}

View file

@ -543,7 +543,6 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
goto out;
}
strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
/*
* If the parent device has a DMA mask associated with it,
* propagate it down to the children.
@ -553,6 +552,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
dev->dev.dma_mask = &dev->dma_mask;
}
dev_set_name(&dev->dev, "%s", info->name);
dev->devid = info->devid;
dev->dev.parent = lchip->dev;
dev->dev.bus = &locomo_bus_type;

View file

@ -550,9 +550,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
goto out;
}
snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
"%4.4lx", info->offset);
dev_set_name(&dev->dev, "%4.4lx", info->offset);
dev->devid = info->devid;
dev->dev.parent = sachip->dev;
dev->dev.bus = &sa1111_bus_type;
@ -560,7 +558,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
dev->res.start = sachip->phys + info->offset;
dev->res.end = dev->res.start + 511;
dev->res.name = dev->dev.bus_id;
dev->res.name = dev_name(&dev->dev);
dev->res.flags = IORESOURCE_MEM;
dev->mapbase = sachip->base + info->offset;
dev->skpcr_mask = info->skpcr_mask;
@ -570,6 +568,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
if (ret) {
printk("SA1111: failed to allocate resource for %s\n",
dev->res.name);
dev_set_name(&dev->dev, NULL);
kfree(dev);
goto out;
}
@ -593,7 +592,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
if (dev->dma_mask != 0xffffffffUL) {
ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
if (ret) {
printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
dev_err(&dev->dev, "SA1111: Failed to register"
" with dmabounce\n");
device_unregister(&dev->dev);
}
}
@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
if (!sachip)
return -ENOMEM;
sachip->clk = clk_get(me, "GPIO27_CLK");
sachip->clk = clk_get(me, "SA1111_CLK");
if (!sachip->clk) {
ret = PTR_ERR(sachip->clk);
goto err_free;

View file

@ -247,7 +247,7 @@ static int __devinit scoop_probe(struct platform_device *pdev)
devptr->gpio.base = -1;
if (inf->gpio_base != 0) {
devptr->gpio.label = pdev->dev.bus_id;
devptr->gpio.label = dev_name(&pdev->dev);
devptr->gpio.base = inf->gpio_base;
devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
devptr->gpio.set = scoop_gpio_set;

File diff suppressed because it is too large Load diff

View file

@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312

View file

@ -783,7 +783,7 @@ static void ecard_proc_init(void)
#define ec_set_resource(ec,nr,st,sz) \
do { \
(ec)->resource[nr].name = ec->dev.bus_id; \
(ec)->resource[nr].name = dev_name(&ec->dev); \
(ec)->resource[nr].start = st; \
(ec)->resource[nr].end = (st) + (sz) - 1; \
(ec)->resource[nr].flags = IORESOURCE_MEM; \
@ -853,8 +853,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
if (ec->resource[i].flags &&
request_resource(&iomem_resource, &ec->resource[i])) {
printk(KERN_ERR "%s: resource(s) not available\n",
ec->dev.bus_id);
dev_err(&ec->dev, "resource(s) not available\n");
ec->resource[i].end -= ec->resource[i].start;
ec->resource[i].start = 0;
ec->resource[i].flags = 0;

201
arch/arm/kernel/kgdb.c Normal file
View file

@ -0,0 +1,201 @@
/*
* arch/arm/kernel/kgdb.c
*
* ARM KGDB support
*
* Copyright (c) 2002-2004 MontaVista Software, Inc
* Copyright (c) 2008 Wind River Systems, Inc.
*
* Authors: George Davis <davis_g@mvista.com>
* Deepak Saxena <dsaxena@plexity.net>
*/
#include <linux/kgdb.h>
#include <asm/traps.h>
/* Make a local copy of the registers passed into the handler (bletch) */
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
{
int regno;
/* Initialize all to zero. */
for (regno = 0; regno < GDB_MAX_REGS; regno++)
gdb_regs[regno] = 0;
gdb_regs[_R0] = kernel_regs->ARM_r0;
gdb_regs[_R1] = kernel_regs->ARM_r1;
gdb_regs[_R2] = kernel_regs->ARM_r2;
gdb_regs[_R3] = kernel_regs->ARM_r3;
gdb_regs[_R4] = kernel_regs->ARM_r4;
gdb_regs[_R5] = kernel_regs->ARM_r5;
gdb_regs[_R6] = kernel_regs->ARM_r6;
gdb_regs[_R7] = kernel_regs->ARM_r7;
gdb_regs[_R8] = kernel_regs->ARM_r8;
gdb_regs[_R9] = kernel_regs->ARM_r9;
gdb_regs[_R10] = kernel_regs->ARM_r10;
gdb_regs[_FP] = kernel_regs->ARM_fp;
gdb_regs[_IP] = kernel_regs->ARM_ip;
gdb_regs[_SPT] = kernel_regs->ARM_sp;
gdb_regs[_LR] = kernel_regs->ARM_lr;
gdb_regs[_PC] = kernel_regs->ARM_pc;
gdb_regs[_CPSR] = kernel_regs->ARM_cpsr;
}
/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
{
kernel_regs->ARM_r0 = gdb_regs[_R0];
kernel_regs->ARM_r1 = gdb_regs[_R1];
kernel_regs->ARM_r2 = gdb_regs[_R2];
kernel_regs->ARM_r3 = gdb_regs[_R3];
kernel_regs->ARM_r4 = gdb_regs[_R4];
kernel_regs->ARM_r5 = gdb_regs[_R5];
kernel_regs->ARM_r6 = gdb_regs[_R6];
kernel_regs->ARM_r7 = gdb_regs[_R7];
kernel_regs->ARM_r8 = gdb_regs[_R8];
kernel_regs->ARM_r9 = gdb_regs[_R9];
kernel_regs->ARM_r10 = gdb_regs[_R10];
kernel_regs->ARM_fp = gdb_regs[_FP];
kernel_regs->ARM_ip = gdb_regs[_IP];
kernel_regs->ARM_sp = gdb_regs[_SPT];
kernel_regs->ARM_lr = gdb_regs[_LR];
kernel_regs->ARM_pc = gdb_regs[_PC];
kernel_regs->ARM_cpsr = gdb_regs[_CPSR];
}
void
sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
{
struct pt_regs *thread_regs;
int regno;
/* Just making sure... */
if (task == NULL)
return;
/* Initialize to zero */
for (regno = 0; regno < GDB_MAX_REGS; regno++)
gdb_regs[regno] = 0;
/* Otherwise, we have only some registers from switch_to() */
thread_regs = task_pt_regs(task);
gdb_regs[_R0] = thread_regs->ARM_r0;
gdb_regs[_R1] = thread_regs->ARM_r1;
gdb_regs[_R2] = thread_regs->ARM_r2;
gdb_regs[_R3] = thread_regs->ARM_r3;
gdb_regs[_R4] = thread_regs->ARM_r4;
gdb_regs[_R5] = thread_regs->ARM_r5;
gdb_regs[_R6] = thread_regs->ARM_r6;
gdb_regs[_R7] = thread_regs->ARM_r7;
gdb_regs[_R8] = thread_regs->ARM_r8;
gdb_regs[_R9] = thread_regs->ARM_r9;
gdb_regs[_R10] = thread_regs->ARM_r10;
gdb_regs[_FP] = thread_regs->ARM_fp;
gdb_regs[_IP] = thread_regs->ARM_ip;
gdb_regs[_SPT] = thread_regs->ARM_sp;
gdb_regs[_LR] = thread_regs->ARM_lr;
gdb_regs[_PC] = thread_regs->ARM_pc;
gdb_regs[_CPSR] = thread_regs->ARM_cpsr;
}
static int compiled_break;
int kgdb_arch_handle_exception(int exception_vector, int signo,
int err_code, char *remcom_in_buffer,
char *remcom_out_buffer,
struct pt_regs *linux_regs)
{
unsigned long addr;
char *ptr;
switch (remcom_in_buffer[0]) {
case 'D':
case 'k':
case 'c':
kgdb_contthread = NULL;
/*
* Try to read optional parameter, pc unchanged if no parm.
* If this was a compiled breakpoint, we need to move
* to the next instruction or we will just breakpoint
* over and over again.
*/
ptr = &remcom_in_buffer[1];
if (kgdb_hex2long(&ptr, &addr))
linux_regs->ARM_pc = addr;
else if (compiled_break == 1)
linux_regs->ARM_pc += 4;
compiled_break = 0;
return 0;
}
return -1;
}
static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
{
kgdb_handle_exception(1, SIGTRAP, 0, regs);
return 0;
}
static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
{
compiled_break = 1;
kgdb_handle_exception(1, SIGTRAP, 0, regs);
return 0;
}
static struct undef_hook kgdb_brkpt_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_BREAKINST,
.fn = kgdb_brk_fn
};
static struct undef_hook kgdb_compiled_brkpt_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_COMPILED_BREAK,
.fn = kgdb_compiled_brk_fn
};
/**
* kgdb_arch_init - Perform any architecture specific initalization.
*
* This function will handle the initalization of any architecture
* specific callbacks.
*/
int kgdb_arch_init(void)
{
register_undef_hook(&kgdb_brkpt_hook);
register_undef_hook(&kgdb_compiled_brkpt_hook);
return 0;
}
/**
* kgdb_arch_exit - Perform any architecture specific uninitalization.
*
* This function will handle the uninitalization of any architecture
* specific callbacks, for dynamic registration and unregistration.
*/
void kgdb_arch_exit(void)
{
unregister_undef_hook(&kgdb_brkpt_hook);
unregister_undef_hook(&kgdb_compiled_brkpt_hook);
}
/*
* Register our undef instruction hooks with ARM undef core.
* We regsiter a hook specifically looking for the KGB break inst
* and we handle the normal undef case within the do_undefinstr
* handler.
*/
struct kgdb_arch arch_kgdb_ops = {
#ifndef __ARMEB__
.gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7}
#else /* ! __ARMEB__ */
.gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe}
#endif
};

View file

@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
INIT_HLIST_HEAD(&empty_rp);
spin_lock_irqsave(&kretprobe_lock, flags);
head = kretprobe_inst_table_head(current);
kretprobe_hash_lock(current, &head, &flags);
/*
* It is possible to have multiple instances associated with a given
@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
}
kretprobe_assert(ri, orig_ret_address, trampoline_address);
spin_unlock_irqrestore(&kretprobe_lock, flags);
kretprobe_hash_unlock(current, &flags);
hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
hlist_del(&ri->hlist);
@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
return (void *)orig_ret_address;
}
/* Called with kretprobe_lock held. */
void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
struct pt_regs *regs)
{

View file

@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/moduleloader.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>

View file

@ -162,7 +162,7 @@ void cpu_idle(void)
if (!idle)
idle = default_idle;
leds_event(led_idle_start);
tick_nohz_stop_sched_tick();
tick_nohz_stop_sched_tick(1);
while (!need_resched())
idle();
leds_event(led_idle_end);

View file

@ -36,6 +36,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/traps.h>
#include "compat.h"
#include "atags.h"
@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
conswitchp = &dummy_con;
#endif
#endif
early_trap_init();
}

View file

@ -130,7 +130,9 @@ static const struct leds_evt_name evt_names[] = {
{ "red", led_red_on, led_red_off },
};
static ssize_t leds_store(struct sys_device *dev, const char *buf, size_t size)
static ssize_t leds_store(struct sys_device *dev,
struct sysdev_attribute *attr,
const char *buf, size_t size)
{
int ret = -EINVAL, len = strcspn(buf, " ");

View file

@ -707,6 +707,11 @@ void abort(void)
EXPORT_SYMBOL(abort);
void __init trap_init(void)
{
return;
}
void __init early_trap_init(void)
{
unsigned long vectors = CONFIG_VECTORS_BASE;
extern char __stubs_start[], __stubs_end[];

View file

@ -393,9 +393,7 @@ static int impd1_probe(struct lm_device *dev)
if (!d)
continue;
snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
"lm%x:%5.5lx", dev->id, idev->offset >> 12);
dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d->dev.parent = &dev->dev;
d->res.start = dev->resource.start + idev->offset;
d->res.end = d->res.start + SZ_4K - 1;
@ -407,8 +405,7 @@ static int impd1_probe(struct lm_device *dev)
ret = amba_device_register(d, &dev->resource);
if (ret) {
printk("unable to register device %s: %d\n",
d->dev.bus_id, ret);
dev_err(&d->dev, "unable to register device: %d\n");
kfree(d);
}
}

View file

@ -81,8 +81,10 @@ int lm_device_register(struct lm_device *dev)
dev->dev.release = lm_device_release;
dev->dev.bus = &lm_bustype;
snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "lm%d", dev->id);
dev->resource.name = dev->dev.bus_id;
ret = dev_set_name(&dev->dev, "lm%d", dev->id);
if (ret)
return ret;
dev->resource.name = dev_name(&dev->dev);
ret = request_resource(&iomem_resource, &dev->resource);
if (ret == 0) {

View file

@ -17,6 +17,7 @@
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/f75375s.h>
#include <linux/leds-pca9532.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = {
.pwm_enable = { 0, 0 },
};
static struct pca9532_platform_data n2100_leds = {
.leds = {
{ .name = "n2100:red:satafail0",
.state = PCA9532_OFF,
.type = PCA9532_TYPE_LED,
},
{ .name = "n2100:red:satafail1",
.state = PCA9532_OFF,
.type = PCA9532_TYPE_LED,
},
{ .name = "n2100:blue:usb",
.state = PCA9532_OFF,
.type = PCA9532_TYPE_LED,
},
{ .type = PCA9532_TYPE_NONE },
{ .type = PCA9532_TYPE_NONE },
{ .type = PCA9532_TYPE_NONE },
{ .type = PCA9532_TYPE_NONE },
{ .name = "n2100:red:usb",
.state = PCA9532_OFF,
.type = PCA9532_TYPE_LED,
},
{ .type = PCA9532_TYPE_NONE }, /* power OFF gpio */
{ .type = PCA9532_TYPE_NONE }, /* reset gpio */
{ .type = PCA9532_TYPE_NONE },
{ .type = PCA9532_TYPE_NONE },
{ .type = PCA9532_TYPE_NONE },
{ .name = "n2100:orange:system",
.state = PCA9532_OFF,
.type = PCA9532_TYPE_LED,
},
{ .name = "n2100:red:system",
.state = PCA9532_OFF,
.type = PCA9532_TYPE_LED,
},
{ .name = "N2100 beeper" ,
.state = PCA9532_OFF,
.type = PCA9532_TYPE_N2100_BEEP,
},
},
.psc = { 0, 0 },
.pwm = { 0, 0 },
};
static struct i2c_board_info __initdata n2100_i2c_devices[] = {
{
I2C_BOARD_INFO("rs5c372b", 0x32),
@ -214,6 +262,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = {
I2C_BOARD_INFO("f75375", 0x2e),
.platform_data = &n2100_f75375s,
},
{
I2C_BOARD_INFO("pca9532", 0x60),
.platform_data = &n2100_leds,
},
};
/*

View file

@ -14,8 +14,8 @@
#include <linux/clk.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/semaphore.h>
#include <asm/semaphore.h>
#include "clock.h"
static LIST_HEAD(clocks);

View file

@ -16,18 +16,24 @@ config CPU_PXA310
config CPU_PXA320
bool "PXA320 (codename Monahans-P)"
config CPU_PXA930
bool "PXA930 (codename Tavor-P)"
endmenu
endif
menu "Select target boards"
config ARCH_GUMSTIX
bool "Gumstix XScale boards"
help
Say Y here if you intend to run this kernel on a
Gumstix Full Function Minature Computer.
config MACH_GUMSTIX_F
bool "Basix, Connex, ws-200ax, ws-400ax systems"
depends on ARCH_GUMSTIX
select PXA25x
config ARCH_LUBBOCK
bool "Intel DBPXA250 Development Platform"
select PXA25x
@ -58,146 +64,6 @@ config PXA_SHARPSL
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
config MACH_E330
bool "Toshiba e330"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_E750
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_E400
bool "Toshiba e400"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
select PXA27x
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_COLIBRI
bool "Toradex Colibri PX27x"
select PXA27x
config MACH_ZYLONITE
bool "PXA3xx Development Platform"
select PXA3xx
select HAVE_PWM
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select PXA_SSP
config MACH_ARMCORE
bool "CompuLab CM-X270 modules"
select PXA27x
select IWMMXT
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
depends on ARCH_PXA
select PXA27x
select IWMMXT
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
endmenu
choice
prompt "Used baseboard"
depends on MACH_PCM027
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
endchoice
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
config PCM990_DISPLAY_NONE
bool "no display"
endchoice
if ARCH_GUMSTIX
choice
prompt "Select target Gumstix board"
config MACH_GUMSTIX_F
bool "Basix, Connex, ws-200ax, ws-400ax systems"
select PXA25x
endchoice
endif
if MACH_TRIZEPS4
choice
prompt "Select base board for Trizeps 4 module"
config MACH_TRIZEPS4_CONXS
bool "ConXS Eval Board"
config MACH_TRIZEPS4_ANY
bool "another Board"
endchoice
endif
endmenu
config MACH_POODLE
bool "Enable Sharp SL-5600 (Poodle) Support"
depends on PXA_SHARPSL
@ -249,6 +115,186 @@ config MACH_TOSA
depends on PXA_SHARPSL
select PXA25x
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
config MACH_E330
bool "Toshiba e330"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e330 family PDA.
config MACH_E350
bool "Toshiba e350"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e350 family PDA.
config MACH_E740
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
config MACH_E750
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
config MACH_E400
bool "Toshiba e400"
default y
depends on ARCH_PXA_ESERIES
help
Say Y here if you intend to run this kernel on a Toshiba
e400 family PDA.
config MACH_E800
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
config MACH_TRIZEPS4
bool "Keith und Koep Trizeps4 DIMM-Module"
select PXA27x
config MACH_TRIZEPS4_CONXS
bool "ConXS Eval Board"
depends on MACH_TRIZEPS4
config MACH_EM_X270
bool "CompuLab EM-x270 platform"
select PXA27x
config MACH_COLIBRI
bool "Toradex Colibri PX27x"
select PXA27x
config MACH_ZYLONITE
bool "PXA3xx Development Platform (aka Zylonite)"
select PXA3xx
select HAVE_PWM
config MACH_LITTLETON
bool "PXA3xx Form Factor Platform (aka Littleton)"
select PXA3xx
select PXA_SSP
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
select PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
select PXA930
config MACH_ARMCORE
bool "CompuLab CM-X270 modules"
select PXA27x
select IWMMXT
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select PXA27x
select IWMMXT
config MACH_PCM027
bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
select PXA27x
select IWMMXT
select PXA_SSP
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
select HAVE_PWM
config MACH_PALMTX
bool "Palm T|X"
default y
depends on ARCH_PXA_PALM
select PXA27x
select IWMMXT
help
Say Y here if you intend to run this kernel on a Palm T|X
handheld computer.
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
select HAVE_PWM
depends on MACH_PCM027
choice
prompt "display on pcm990"
depends on MACH_PCM990_BASEBOARD
config PCM990_DISPLAY_SHARP
bool "sharp lq084v1dg21 stn display"
config PCM990_DISPLAY_NEC
bool "nec nl6448bc20_18d tft display"
config PCM990_DISPLAY_NONE
bool "no display"
endchoice
config PXA_EZX
bool "Motorola EZX Platform"
select PXA27x
select IWMMXT
select HAVE_PWM
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
config MACH_EZX_E680
bool "Motorola EZX E680"
default y
depends on PXA_EZX
config MACH_EZX_A1200
bool "Motorola EZX A1200"
default y
depends on PXA_EZX
config MACH_EZX_A910
bool "Motorola EZX A910"
default y
depends on PXA_EZX
config MACH_EZX_E6
bool "Motorola EZX E6"
default y
depends on PXA_EZX
config MACH_EZX_E2
bool "Motorola EZX E2"
default y
depends on PXA_EZX
endmenu
config PXA25x
bool
help
@ -288,4 +334,13 @@ config PXA_PWM
default BACKLIGHT_PWM
help
Enable support for PXA2xx/PXA3xx PWM controllers
config TOSA_BT
tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
depends on MACH_TOSA
select RFKILL
help
This is a simple driver that is able to control
the state of built in bluetooth chip on tosa.
endif

View file

@ -4,7 +4,7 @@
# Common support (must be linked before board specific support)
obj-y += clock.o devices.o generic.o irq.o dma.o \
time.o gpio.o
time.o gpio.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o
@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
# Specific board support
obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o
@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
obj-$(CONFIG_MACH_EM_X270) += em-x270.o
obj-$(CONFIG_MACH_MAGICIAN) += magician.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o
obj-$(CONFIG_MACH_E740) += e740_lcd.o
obj-$(CONFIG_MACH_E750) += e750_lcd.o
obj-$(CONFIG_MACH_E400) += e400_lcd.o
obj-$(CONFIG_MACH_E800) += e800_lcd.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-y += zylonite.o
@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o
endif
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
obj-$(CONFIG_MACH_SAAR) += saar.o
obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o
obj-$(CONFIG_PXA_EZX) += ezx.o
# Support for blinky lights
led-y := leds.o
@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS) += $(led-y)
ifeq ($(CONFIG_PCI),y)
obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
endif
obj-$(CONFIG_TOSA_BT) += tosa-bt.o

View file

@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
EXPORT_SYMBOL(clk_get_rate);
static void clk_gpio27_enable(struct clk *clk)
{
pxa_gpio_mode(GPIO11_3_6MHz_MD);
}
static void clk_gpio27_disable(struct clk *clk)
{
}
static const struct clkops clk_gpio27_ops = {
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
};
void clk_cken_enable(struct clk *clk)
{
CKEN |= 1 << clk->cken;
@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
.disable = clk_cken_disable,
};
static struct clk common_clks[] = {
{
.name = "GPIO27_CLK",
.ops = &clk_gpio27_ops,
.rate = 3686400,
},
};
void clks_register(struct clk *clks, size_t num)
{
int i;
@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
list_add(&clks[i].node, &clocks);
mutex_unlock(&clocks_mutex);
}
static int __init clk_init(void)
{
clks_register(common_clks, ARRAY_SIZE(common_clks));
return 0;
}
arch_initcall(clk_init);

View file

@ -47,9 +47,42 @@ struct clk {
.other = _other, \
}
#define INIT_CLK(_name, _ops, _rate, _delay, _dev) \
{ \
.name = _name, \
.dev = _dev, \
.ops = _ops, \
.rate = _rate, \
.delay = _delay, \
}
extern const struct clkops clk_cken_ops;
void clk_cken_enable(struct clk *clk);
void clk_cken_disable(struct clk *clk);
#ifdef CONFIG_PXA3xx
#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \
{ \
.name = _name, \
.dev = _dev, \
.ops = &clk_pxa3xx_cken_ops, \
.rate = _rate, \
.cken = CKEN_##_cken, \
.delay = _delay, \
}
#define PXA3xx_CK(_name, _cken, _ops, _dev) \
{ \
.name = _name, \
.dev = _dev, \
.ops = _ops, \
.cken = CKEN_##_cken, \
}
extern const struct clkops clk_pxa3xx_cken_ops;
extern void clk_pxa3xx_cken_enable(struct clk *);
extern void clk_pxa3xx_cken_disable(struct clk *);
#endif
void clks_register(struct clk *clks, size_t num);

View file

@ -5,7 +5,7 @@
*
* Bits taken from various places.
*
* Copyright (C) 2007 Compulab, Ltd.
* Copyright (C) 2007, 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@ -19,16 +19,16 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach/pci.h>
#include <asm/arch/cm-x270.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
unsigned long it8152_base_address = CMX270_IT8152_VIRT;
unsigned long it8152_base_address;
static int cmx270_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
pr_info("Adjusting zones for CM-x270\n");
pr_info("Adjusting zones for CM-X270\n");
/*
* Only adjust if > 64M on current system
@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
it8152_irq_demux(irq, desc);
}
void __cmx270_pci_init_irq(void)
void __cmx270_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
cmx270_it8152_irq_demux);
cmx270_it8152_irq_gpio = irq_gpio;
set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
}
#ifdef CONFIG_PM
@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
Here comes the ugly part. The routing is baseboard specific,
but defining a platform for each possible base of CM-x270 is
unrealistic. Here we keep mapping for ATXBase and SB-x270.
but defining a platform for each possible base of CM-X270 is
unrealistic. Here we keep mapping for ATXBase and SB-X270.
*/
/* ATXBASE PCI slot */
if (slot == 7)

View file

@ -1,13 +1,13 @@
extern void __cmx270_pci_init_irq(void);
extern void __cmx270_pci_init_irq(int irq_gpio);
extern void __cmx270_pci_suspend(void);
extern void __cmx270_pci_resume(void);
#ifdef CONFIG_PCI
#define cmx270_pci_init_irq __cmx270_pci_init_irq
#define cmx270_pci_suspend __cmx270_pci_suspend
#define cmx270_pci_resume __cmx270_pci_resume
#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
#else
#define cmx270_pci_init_irq() do {} while (0)
#define cmx270_pci_suspend() do {} while (0)
#define cmx270_pci_resume() do {} while (0)
#define cmx270_pci_init_irq(x) do {} while (0)
#define cmx270_pci_suspend(x) do {} while (0)
#define cmx270_pci_resume(x) do {} while (0)
#endif

View file

@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-pxa/cm-x270.c
*
* Copyright (C) 2007 CompuLab, Ltd.
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@ -9,44 +9,156 @@
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/pm.h>
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/sysdev.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/serial_8250.h>
#include <video/mbxfb.h>
#include <linux/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/cm-x270.h>
#include <asm/hardware/it8152.h>
#include "generic.h"
#include "cm-x270-pci.h"
/* virtual addresses for statically mapped regions */
#define CMX270_VIRT_BASE (0xe8000000)
#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
static struct resource cmx270_dm9k_resource[] = {
/* GPIO IRQ usage */
#define GPIO10_ETHIRQ (10)
#define GPIO22_IT8152_IRQ (22)
#define GPIO83_MMC_IRQ (83)
#define GPIO95_GFXIRQ (95)
#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ)
#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ)
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
static unsigned long cmx270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO98_AC97_SYSCLK,
GPIO113_AC97_nRESET,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* MCI controller */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* SSP1 */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO87_SSP2_TXD,
GPIO88_SSP2_RXD,
/* PC Card */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* SDRAM and local bus */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
GPIO33_nCS_5,
GPIO49_nPWE,
GPIO18_RDY,
/* GPIO */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
GPIO53_GPIO, /* PC card reset */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
GPIO89_GPIO, /* NAND Ready/Busy */
/* interrupts */
GPIO10_GPIO, /* DM9000 interrupt */
GPIO83_GPIO, /* MMC card detect */
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource cmx270_dm9000_resource[] = {
[0] = {
.start = DM9000_PHYS_BASE,
.end = DM9000_PHYS_BASE + 4,
@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
}
};
/* for the moment we limit ourselves to 32bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data cmx270_dm9k_platdata = {
static struct dm9000_plat_data cmx270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
/* Ethernet device */
static struct platform_device cmx270_device_dm9k = {
static struct platform_device cmx270_dm9000_device = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
.resource = cmx270_dm9k_resource,
.num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
.resource = cmx270_dm9000_resource,
.dev = {
.platform_data = &cmx270_dm9k_platdata,
.platform_data = &cmx270_dm9000_platdata,
}
};
/* touchscreen controller */
static void __init cmx270_init_dm9000(void)
{
platform_device_register(&cmx270_dm9000_device);
}
#else
static inline void cmx270_init_dm9000(void) {}
#endif
/* UCB1400 touchscreen controller */
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx270_ts_device = {
.name = "ucb1400_ts",
.id = -1,
};
/* RTC */
static void __init cmx270_init_touchscreen(void)
{
platform_device_register(&cmx270_ts_device);
}
#else
static inline void cmx270_init_touchscreen(void) {}
#endif
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
[0] = {
.start = RTC_PHYS_BASE,
@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
}
};
/*
* CM-X270 LEDs
*/
static struct platform_device cmx270_led_device = {
.name = "cm-x270-led",
.id = -1,
static void __init cmx270_init_rtc(void)
{
platform_device_register(&cmx270_rtc_device);
}
#else
static inline void cmx270_init_rtc(void) {}
#endif
/* CM-X270 LEDs */
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cmx270_leds[] = {
[0] = {
.name = "cm-x270:red",
.default_trigger = "nand-disk",
.gpio = 93,
.active_low = 1,
},
[1] = {
.name = "cm-x270:green",
.default_trigger = "heartbeat",
.gpio = 94,
.active_low = 1,
},
};
static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
.num_leds = ARRAY_SIZE(cmx270_leds),
.leds = cmx270_leds,
};
static struct platform_device cmx270_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &cmx270_gpio_led_pdata,
},
};
static void __init cmx270_init_leds(void)
{
platform_device_register(&cmx270_led_device);
}
#else
static inline void cmx270_init_leds(void) {}
#endif
/* 2700G graphics */
#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
static u64 fb_dma_mask = ~(u64)0;
static struct resource cmx270_2700G_resource[] = {
/* frame buffer memory including ODFB and External SDRAM */
[0] = {
.start = MARATHON_PHYS,
.end = MARATHON_PHYS + 0x02000000,
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 0x01ffffff,
.flags = IORESOURCE_MEM,
},
/* Marathon registers */
[1] = {
.start = MARATHON_PHYS + 0x03fe0000,
.end = MARATHON_PHYS + 0x03ffffff,
.start = PXA_CS2_PHYS + 0x03fe0000,
.end = PXA_CS2_PHYS + 0x03ffffff,
.flags = IORESOURCE_MEM,
},
};
@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
.id = -1,
};
static u64 ata_dma_mask = ~(u64)0;
static struct platform_device cmx270_ata = {
.name = "pata_cm_x270",
.id = -1,
.dev = {
.dma_mask = &ata_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
};
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&cmx270_device_dm9k,
&cmx270_rtc_device,
&cmx270_2700G,
&cmx270_led_device,
&cmx270_ts_device,
&cmx270_ata,
};
/* Map PCI companion and IDE/General Purpose CS statically */
static struct map_desc cmx270_io_desc[] __initdata = {
[0] = { /* IDE/general purpose space */
.virtual = CMX270_IDE104_VIRT,
.pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
.length = SZ_64M - SZ_8M,
.type = MT_DEVICE
},
[1] = { /* PCI bridge */
.virtual = CMX270_IT8152_VIRT,
.pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
},
};
static void __init cmx270_init_2700G(void)
{
platform_device_register(&cmx270_2700G);
}
#else
static inline void cmx270_init_2700G(void) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
/*
Display definitions
keep these for backwards compatibility, although symbolic names (as
@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
*/
__setup("monitor=", cmx270_set_display);
static void __init cmx270_init_display(void)
{
set_pxa_fb_info(cmx270_display);
}
#else
static inline void cmx270_init_display(void) {}
#endif
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int cmx270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
.init = cmx270_ohci_init,
};
static void __init cmx270_init_ohci(void)
{
pxa_set_ohci_info(&cmx270_ohci_platform_data);
}
#else
static inline void cmx270_init_ohci(void) {}
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int cmx270_mci_init(struct device *dev,
irq_handler_t cmx270_detect_int,
void *data)
{
int err;
/*
* setup GPIO for PXA27x MMC controller
*/
pxa_gpio_mode(GPIO32_MMCCLK_MD);
pxa_gpio_mode(GPIO112_MMCCMD_MD);
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
if (err) {
dev_warn(dev, "power gpio unavailable\n");
return err;
}
/* SB-X270 uses GPIO105 as SD power enable */
pxa_gpio_mode(105 | GPIO_OUT);
/* card detect IRQ on GPIO 83 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
gpio_direction_output(GPIO105_MMC_POWER, 0);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err)
printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
if (err) {
gpio_free(GPIO105_MMC_POWER);
dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
}
return err;
}
@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
printk(KERN_DEBUG "%s: on\n", __func__);
GPCR(105) = GPIO_bit(105);
dev_dbg(dev, "power on\n");
gpio_set_value(GPIO105_MMC_POWER, 0);
} else {
GPSR(105) = GPIO_bit(105);
printk(KERN_DEBUG "%s: off\n", __func__);
gpio_set_value(GPIO105_MMC_POWER, 1);
dev_dbg(dev, "power off\n");
}
}
static void cmx270_mci_exit(struct device *dev, void *data)
{
free_irq(CMX270_MMC_IRQ, data);
gpio_free(GPIO105_MMC_POWER);
}
static struct pxamci_platform_data cmx270_mci_platform_data = {
@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
.exit = cmx270_mci_exit,
};
static void __init cmx270_init_mmc(void)
{
pxa_set_mci_info(&cmx270_mci_platform_data);
}
#else
static inline void cmx270_init_mmc(void) {}
#endif
#ifdef CONFIG_PM
static unsigned long sleep_save_msc[10];
@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
static int __init cmx270_pm_init(void) { return 0; }
#endif
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init cmx270_init_ac97(void)
{
pxa_set_ac97_info(NULL);
}
#else
static inline void cmx270_init_ac97(void) {}
#endif
static void __init cmx270_init(void)
{
cmx270_pm_init();
set_pxa_fb_info(cmx270_display);
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
/* register CM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&cmx270_mci_platform_data);
pxa_set_ohci_info(&cmx270_ohci_platform_data);
/* This enables the STUART */
pxa_gpio_mode(GPIO46_STRXD_MD);
pxa_gpio_mode(GPIO47_STTXD_MD);
/* This enables the BTUART */
pxa_gpio_mode(GPIO42_BTRXD_MD);
pxa_gpio_mode(GPIO43_BTTXD_MD);
pxa_gpio_mode(GPIO44_BTCTS_MD);
pxa_gpio_mode(GPIO45_BTRTS_MD);
cmx270_init_dm9000();
cmx270_init_rtc();
cmx270_init_display();
cmx270_init_mmc();
cmx270_init_ohci();
cmx270_init_ac97();
cmx270_init_touchscreen();
cmx270_init_leds();
cmx270_init_2700G();
}
static void __init cmx270_init_irq(void)
{
pxa27x_init_irq();
cmx270_pci_init_irq();
/* Setup interrupt for dm9000 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
/* Setup interrupt for 2700G */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
}
#ifdef CONFIG_PCI
/* Map PCI companion statically */
static struct map_desc cmx270_io_desc[] __initdata = {
[0] = { /* PCI bridge */
.virtual = CMX270_IT8152_VIRT,
.pfn = __phys_to_pfn(PXA_CS4_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
},
};
static void __init cmx270_map_io(void)
{
pxa_map_io();
iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
}
it8152_base_address = CMX270_IT8152_VIRT;
}
#else
static void __init cmx270_map_io(void)
{
pxa_map_io();
}
#endif
MACHINE_START(ARMCORE, "Compulab CM-x270")
.boot_params = 0xa0000100,

View file

@ -465,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
else
GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data corgi_ficp_platform_data = {

View file

@ -13,8 +13,10 @@
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/ohci.h>
#include <asm/arch/pxa27x_keypad.h>
#include <asm/arch/pxa2xx_spi.h>
#include <asm/arch/camera.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxa3xx_nand.h>
#include "devices.h"
#include "generic.h"
@ -830,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
pxa_register_device(&pxa3xx_device_mci3, info);
}
static struct resource pxa3xx_resources_nand[] = {
[0] = {
.start = 0x43100000,
.end = 0x43100053,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_NAND,
.end = IRQ_NAND,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* DRCMR for Data DMA */
.start = 97,
.end = 97,
.flags = IORESOURCE_DMA,
},
[3] = {
/* DRCMR for Command DMA */
.start = 99,
.end = 99,
.flags = IORESOURCE_DMA,
},
};
static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
struct platform_device pxa3xx_device_nand = {
.name = "pxa3xx-nand",
.id = -1,
.dev = {
.dma_mask = &pxa3xx_nand_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(pxa3xx_resources_nand),
.resource = pxa3xx_resources_nand,
};
void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
{
pxa_register_device(&pxa3xx_device_nand, info);
}
#endif /* CONFIG_PXA3xx */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
{
struct platform_device *pd;
pd = platform_device_alloc("pxa2xx-spi", id);
if (pd == NULL) {
printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
id);
return;
}
pd->dev.platform_data = info;
platform_device_add(pd);
}

View file

@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
extern struct platform_device pxa27x_device_pwm0;
extern struct platform_device pxa27x_device_pwm1;
extern struct platform_device pxa3xx_device_nand;
void __init pxa_register_device(struct platform_device *dev, void *data);

View file

@ -0,0 +1,56 @@
/*
* e400_lcd.c
*
* (c) 2005 Ian Molton <spyro@f2s.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <asm/mach-types.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxafb.h>
static struct pxafb_mode_info e400_pxafb_mode_info = {
.pixclock = 140703,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.left_margin = 28,
.right_margin = 8,
.vsync_len = 3,
.upper_margin = 5,
.lower_margin = 6,
.sync = 0,
};
static struct pxafb_mach_info e400_pxafb_mach_info = {
.modes = &e400_pxafb_mode_info,
.num_modes = 1,
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
.lccr3 = 0,
.pxafb_backlight_power = NULL,
};
static int __init e400_lcd_init(void)
{
if (!machine_is_e400())
return -ENODEV;
set_pxa_fb_info(&e400_pxafb_mach_info);
return 0;
}
module_init(e400_lcd_init);
MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
MODULE_DESCRIPTION("e400 lcd driver");
MODULE_LICENSE("GPLv2");

View file

@ -0,0 +1,123 @@
/* e740_lcd.c
*
* This file contains the definitions for the LCD timings and functions
* to control the LCD power / frontlighting via the w100fb driver.
*
* (c) 2005 Ian Molton <spyro@f2s.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <video/w100fb.h>
/*
**potential** shutdown routine - to be investigated
devmem2 0x0c010528 w 0xff3fff00
devmem2 0x0c010190 w 0x7FFF8000
devmem2 0x0c0101b0 w 0x00FF0000
devmem2 0x0c01008c w 0x00000000
devmem2 0x0c010080 w 0x000000bf
devmem2 0x0c010098 w 0x00000015
devmem2 0x0c010088 w 0x4b000204
devmem2 0x0c010098 w 0x0000001d
*/
static struct w100_gen_regs e740_lcd_regs = {
.lcd_format = 0x00008023,
.lcdd_cntl1 = 0x0f000000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x00ffff03,
.genlcd_cntl2 = 0x003c0f03,
.genlcd_cntl3 = 0x000143aa,
};
static struct w100_mode e740_lcd_mode = {
.xres = 240,
.yres = 320,
.left_margin = 20,
.right_margin = 28,
.upper_margin = 9,
.lower_margin = 8,
.crtc_ss = 0x80140013,
.crtc_ls = 0x81150110,
.crtc_gs = 0x80050005,
.crtc_vpos_gs = 0x000a0009,
.crtc_rev = 0x0040010a,
.crtc_dclk = 0xa906000a,
.crtc_gclk = 0x80050108,
.crtc_goe = 0x80050108,
.pll_freq = 57,
.pixclk_divider = 4,
.pixclk_divider_rotated = 4,
.pixclk_src = CLK_SRC_XTAL,
.sysclk_divider = 1,
.sysclk_src = CLK_SRC_PLL,
.crtc_ps1_active = 0x41060010,
};
static struct w100_gpio_regs e740_w100_gpio_info = {
.init_data1 = 0x21002103,
.gpio_dir1 = 0xffffdeff,
.gpio_oe1 = 0x03c00643,
.init_data2 = 0x003f003f,
.gpio_dir2 = 0xffffffff,
.gpio_oe2 = 0x000000ff,
};
static struct w100fb_mach_info e740_fb_info = {
.modelist = &e740_lcd_mode,
.num_modes = 1,
.regs = &e740_lcd_regs,
.gpio = &e740_w100_gpio_info,
.xtal_freq = 14318000,
.xtal_dbl = 1,
};
static struct resource e740_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
/* ----------------------- device declarations -------------------------- */
static struct platform_device e740_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e740_fb_info,
},
.num_resources = ARRAY_SIZE(e740_fb_resources),
.resource = e740_fb_resources,
};
static int e740_lcd_init(void)
{
int ret;
if (!machine_is_e740())
return -ENODEV;
return platform_device_register(&e740_fb_device);
}
module_init(e740_lcd_init);
MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
MODULE_DESCRIPTION("e740 lcd driver");
MODULE_LICENSE("GPLv2");

View file

@ -0,0 +1,109 @@
/* e750_lcd.c
*
* This file contains the definitions for the LCD timings and functions
* to control the LCD power / frontlighting via the w100fb driver.
*
* (c) 2005 Ian Molton <spyro@f2s.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <video/w100fb.h>
static struct w100_gen_regs e750_lcd_regs = {
.lcd_format = 0x00008003,
.lcdd_cntl1 = 0x00000000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x00fff003,
.genlcd_cntl2 = 0x003c0f03,
.genlcd_cntl3 = 0x000143aa,
};
static struct w100_mode e750_lcd_mode = {
.xres = 240,
.yres = 320,
.left_margin = 21,
.right_margin = 22,
.upper_margin = 5,
.lower_margin = 4,
.crtc_ss = 0x80150014,
.crtc_ls = 0x8014000d,
.crtc_gs = 0xc1000005,
.crtc_vpos_gs = 0x00020147,
.crtc_rev = 0x0040010a,
.crtc_dclk = 0xa1700030,
.crtc_gclk = 0x80cc0015,
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x61060017,
.pll_freq = 57,
.pixclk_divider = 4,
.pixclk_divider_rotated = 4,
.pixclk_src = CLK_SRC_XTAL,
.sysclk_divider = 1,
.sysclk_src = CLK_SRC_PLL,
};
static struct w100_gpio_regs e750_w100_gpio_info = {
.init_data1 = 0x01192f1b,
.gpio_dir1 = 0xd5ffdeff,
.gpio_oe1 = 0x000020bf,
.init_data2 = 0x010f010f,
.gpio_dir2 = 0xffffffff,
.gpio_oe2 = 0x000001cf,
};
static struct w100fb_mach_info e750_fb_info = {
.modelist = &e750_lcd_mode,
.num_modes = 1,
.regs = &e750_lcd_regs,
.gpio = &e750_w100_gpio_info,
.xtal_freq = 14318000,
.xtal_dbl = 1,
};
static struct resource e750_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
/* ----------------------- device declarations -------------------------- */
static struct platform_device e750_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e750_fb_info,
},
.num_resources = ARRAY_SIZE(e750_fb_resources),
.resource = e750_fb_resources,
};
static int e750_lcd_init(void)
{
if (!machine_is_e750())
return -ENODEV;
return platform_device_register(&e750_fb_device);
}
module_init(e750_lcd_init);
MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
MODULE_DESCRIPTION("e750 lcd driver");
MODULE_LICENSE("GPLv2");

View file

@ -0,0 +1,159 @@
/* e800_lcd.c
*
* This file contains the definitions for the LCD timings and functions
* to control the LCD power / frontlighting via the w100fb driver.
*
* (c) 2005 Ian Molton <spyro@f2s.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <video/w100fb.h>
static struct w100_gen_regs e800_lcd_regs = {
.lcd_format = 0x00008003,
.lcdd_cntl1 = 0x02a00000,
.lcdd_cntl2 = 0x0003ffff,
.genlcd_cntl1 = 0x000ff2a3,
.genlcd_cntl2 = 0x000002a3,
.genlcd_cntl3 = 0x000102aa,
};
static struct w100_mode e800_lcd_mode[2] = {
[0] = {
.xres = 480,
.yres = 640,
.left_margin = 52,
.right_margin = 148,
.upper_margin = 2,
.lower_margin = 6,
.crtc_ss = 0x80350034,
.crtc_ls = 0x802b0026,
.crtc_gs = 0x80160016,
.crtc_vpos_gs = 0x00020003,
.crtc_rev = 0x0040001d,
.crtc_dclk = 0xe0000000,
.crtc_gclk = 0x82a50049,
.crtc_goe = 0x80ee001c,
.crtc_ps1_active = 0x00000000,
.pll_freq = 128,
.pixclk_divider = 4,
.pixclk_divider_rotated = 6,
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
},
[1] = {
.xres = 240,
.yres = 320,
.left_margin = 15,
.right_margin = 88,
.upper_margin = 0,
.lower_margin = 7,
.crtc_ss = 0xd010000f,
.crtc_ls = 0x80070003,
.crtc_gs = 0x80000000,
.crtc_vpos_gs = 0x01460147,
.crtc_rev = 0x00400003,
.crtc_dclk = 0xa1700030,
.crtc_gclk = 0x814b0008,
.crtc_goe = 0x80cc0015,
.crtc_ps1_active = 0x00000000,
.pll_freq = 100,
.pixclk_divider = 6, /* Wince uses 14 which gives a 7MHz pclk. */
.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
.pixclk_src = CLK_SRC_PLL,
.sysclk_divider = 0,
.sysclk_src = CLK_SRC_PLL,
}
};
static struct w100_gpio_regs e800_w100_gpio_info = {
.init_data1 = 0xc13fc019,
.gpio_dir1 = 0x3e40df7f,
.gpio_oe1 = 0x003c3000,
.init_data2 = 0x00000000,
.gpio_dir2 = 0x00000000,
.gpio_oe2 = 0x00000000,
};
static struct w100_mem_info e800_w100_mem_info = {
.ext_cntl = 0x09640011,
.sdram_mode_reg = 0x00600021,
.ext_timing_cntl = 0x10001545,
.io_cntl = 0x7ddd7333,
.size = 0x1fffff,
};
static void e800_tg_change(struct w100fb_par *par)
{
unsigned long tmp;
tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
if (par->mode->xres == 480)
tmp |= 0x100;
else
tmp &= ~0x100;
w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
}
static struct w100_tg_info e800_tg_info = {
.change = e800_tg_change,
};
static struct w100fb_mach_info e800_fb_info = {
.modelist = e800_lcd_mode,
.num_modes = 2,
.regs = &e800_lcd_regs,
.gpio = &e800_w100_gpio_info,
.mem = &e800_w100_mem_info,
.tg = &e800_tg_info,
.xtal_freq = 16000000,
};
static struct resource e800_fb_resources[] = {
[0] = {
.start = 0x0c000000,
.end = 0x0cffffff,
.flags = IORESOURCE_MEM,
},
};
/* ----------------------- device declarations -------------------------- */
static struct platform_device e800_fb_device = {
.name = "w100fb",
.id = -1,
.dev = {
.platform_data = &e800_fb_info,
},
.num_resources = ARRAY_SIZE(e800_fb_resources),
.resource = e800_fb_resources,
};
static int e800_lcd_init(void)
{
if (!machine_is_e800())
return -ENODEV;
return platform_device_register(&e800_fb_device);
}
module_init(e800_lcd_init);
MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
MODULE_DESCRIPTION("e800 lcd driver");
MODULE_LICENSE("GPLv2");

View file

@ -1,7 +1,7 @@
/*
* Support for CompuLab EM-x270 platform
* Support for CompuLab EM-X270 platform
*
* Copyright (C) 2007 CompuLab, Ltd.
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@ -14,31 +14,159 @@
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/pxa27x_keypad.h>
#include "generic.h"
/* GPIO IRQ usage */
#define EM_X270_MMC_PD (105)
#define EM_X270_ETHIRQ IRQ_GPIO(41)
#define EM_X270_MMC_IRQ IRQ_GPIO(13)
#define GPIO41_ETHIRQ (41)
#define GPIO13_MMC_CD (13)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
static struct resource em_x270_dm9k_resource[] = {
/* NAND control GPIOs */
#define GPIO11_NAND_CS (11)
#define GPIO56_NAND_RB (56)
static unsigned long em_x270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO98_AC97_SYSCLK,
GPIO113_AC97_nRESET,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* MCI controller */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* QCI */
GPIO84_CIF_FV,
GPIO25_CIF_LV,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO81_CIF_DD_0,
GPIO55_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO50_CIF_DD_3,
GPIO52_CIF_DD_4,
GPIO48_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO12_CIF_DD_7,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* Keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
GPIO22_KP_MKOUT_7,
/* SSP1 */
GPIO26_SSP1_RXD,
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO57_SSP1_TXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
/* SDRAM and local bus */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
GPIO49_nPWE,
GPIO18_RDY,
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
GPIO56_GPIO, /* NAND Ready/Busy */
/* interrupts */
GPIO13_GPIO, /* MMC card detect */
GPIO41_GPIO, /* DM9000 interrupt */
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource em_x270_dm9000_resource[] = {
[0] = {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 3,
@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
}
};
/* for the moment we limit ourselves to 32bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data em_x270_dm9k_platdata = {
static struct dm9000_plat_data em_x270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
/* Ethernet device */
static struct platform_device em_x270_dm9k = {
static struct platform_device em_x270_dm9000 = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(em_x270_dm9k_resource),
.resource = em_x270_dm9k_resource,
.num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
.resource = em_x270_dm9000_resource,
.dev = {
.platform_data = &em_x270_dm9k_platdata,
.platform_data = &em_x270_dm9000_platdata,
}
};
/* WM9712 touchscreen controller. Hopefully the driver will make it to
* the mainstream sometime */
static struct platform_device em_x270_ts = {
.name = "wm97xx-ts",
.id = -1,
};
static void __init em_x270_init_dm9000(void)
{
platform_device_register(&em_x270_dm9000);
}
#else
static inline void em_x270_init_dm9000(void) {}
#endif
/* RTC */
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource em_x270_v3020_resource[] = {
[0] = {
.start = PXA_CS4_PHYS,
@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
}
};
/* NAND flash */
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (56)
static void __init em_x270_init_rtc(void)
{
platform_device_register(&em_x270_rtc);
}
#else
static inline void em_x270_init_rtc(void) {}
#endif
/* NAND flash */
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static inline void nand_cs_on(void)
{
GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO11_NAND_CS, 0);
}
static void nand_cs_off(void)
{
dsb();
GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO11_NAND_CS, 1);
}
/* hardware specific access to control-lines */
@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
{
dsb();
return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
return gpio_get_value(GPIO56_NAND_RB);
}
static struct mtd_partition em_x270_partition_info[] = {
@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
}
};
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&em_x270_dm9k,
&em_x270_ts,
&em_x270_rtc,
&em_x270_nand,
};
static void __init em_x270_init_nand(void)
{
int err;
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
if (err) {
pr_warning("EM-X270: failed to request NAND CS gpio\n");
return;
}
gpio_direction_output(GPIO11_NAND_CS, 1);
err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
if (err) {
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
gpio_direction_input(GPIO56_NAND_RB);
platform_device_register(&em_x270_nand);
}
#else
static inline void em_x270_init_nand(void) {}
#endif
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.init = em_x270_ohci_init,
};
static void __init em_x270_init_ohci(void)
{
pxa_set_ohci_info(&em_x270_ohci_platform_data);
}
#else
static inline void em_x270_init_ohci(void) {}
#endif
/* MCI controller setup */
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
int err;
/* setup GPIO for PXA27x MMC controller */
pxa_gpio_mode(GPIO32_MMCCLK_MD);
pxa_gpio_mode(GPIO112_MMCCMD_MD);
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
/* EM-X270 uses GPIO13 as SD power enable */
pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
__func__, err);
@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
free_irq(EM_X270_MMC_IRQ, data);
int irq = gpio_to_irq(GPIO13_MMC_CD);
free_irq(irq, data);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
.exit = em_x270_mci_exit,
};
static void __init em_x270_init_mmc(void)
{
pxa_set_mci_info(&em_x270_mci_platform_data);
}
#else
static inline void em_x270_init_mmc(void) {}
#endif
/* LCD 480x640 */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info em_x270_lcd_mode = {
.pixclock = 50000,
.bpp = 16,
@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
static struct pxafb_mach_info em_x270_lcd = {
.modes = &em_x270_lcd_mode,
.num_modes = 1,
.cmap_inverse = 0,
.cmap_static = 0,
.lccr0 = LCCR0_PAS,
.lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static void __init em_x270_init_lcd(void)
{
set_pxa_fb_info(&em_x270_lcd);
}
#else
static inline void em_x270_init_lcd(void) {}
#endif
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init em_x270_init_ac97(void)
{
pxa_set_ac97_info(NULL);
}
#else
static inline void em_x270_init_ac97(void) {}
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int em_x270_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
};
struct pxa27x_keypad_platform_data em_x270_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 3,
.matrix_key_cols = 3,
.matrix_key_map = em_x270_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
};
static void __init em_x270_init_keypad(void)
{
pxa_set_keypad_info(&em_x270_keypad_info);
}
#else
static inline void em_x270_init_keypad(void) {}
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button gpio_keys_button[] = {
[0] = {
.desc = "sleep/wakeup",
.code = KEY_SUSPEND,
.type = EV_PWR,
.gpio = 1,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
.buttons = gpio_keys_button,
.nbuttons = 1,
};
static struct platform_device em_x270_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &em_x270_gpio_keys_data,
},
};
static void __init em_x270_init_gpio_keys(void)
{
platform_device_register(&em_x270_gpio_keys);
}
#else
static inline void em_x270_init_gpio_keys(void) {}
#endif
static void __init em_x270_init(void)
{
/* setup LCD */
set_pxa_fb_info(&em_x270_lcd);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
/* register EM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&em_x270_mci_platform_data);
pxa_set_ohci_info(&em_x270_ohci_platform_data);
/* setup STUART GPIOs */
pxa_gpio_mode(GPIO46_STRXD_MD);
pxa_gpio_mode(GPIO47_STTXD_MD);
/* setup BTUART GPIOs */
pxa_gpio_mode(GPIO42_BTRXD_MD);
pxa_gpio_mode(GPIO43_BTTXD_MD);
pxa_gpio_mode(GPIO44_BTCTS_MD);
pxa_gpio_mode(GPIO45_BTRTS_MD);
/* Setup interrupt for dm9000 */
set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
em_x270_init_dm9000();
em_x270_init_rtc();
em_x270_init_nand();
em_x270_init_lcd();
em_x270_init_mmc();
em_x270_init_ohci();
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
}
MACHINE_START(EM_X270, "Compulab EM-x270")
MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,

View file

@ -17,7 +17,7 @@
#include <asm/arch/hardware.h>
#include <asm/mach-types.h>
#include <generic.h>
#include "generic.h"
/* Only e800 has 128MB RAM */
static void __init eseries_fixup(struct machine_desc *desc,
@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
MACHINE_END
#endif
#ifdef CONFIG_MACH_E350
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E740
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */

View file

@ -0,0 +1,57 @@
/*
* UDC functions for the Toshiba e-series PDAs
*
* Copyright (c) Ian Molton 2003
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <asm/arch/udc.h>
#include <asm/arch/eseries-gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/domain.h>
/* local PXA generic code */
#include "generic.h"
static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
.gpio_vbus = GPIO_E7XX_USB_DISC,
.gpio_pullup = GPIO_E7XX_USB_PULLUP,
.gpio_pullup_inverted = 1
};
static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
.gpio_vbus = GPIO_E800_USB_DISC,
.gpio_pullup = GPIO_E800_USB_PULLUP,
.gpio_pullup_inverted = 1
};
static int __init eseries_udc_init(void)
{
if (machine_is_e330() || machine_is_e350() ||
machine_is_e740() || machine_is_e750() ||
machine_is_e400())
pxa_set_udc_info(&e7xx_udc_mach_info);
else if (machine_is_e800())
pxa_set_udc_info(&e800_udc_mach_info);
return 0;
}
module_init(eseries_udc_init);
MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
MODULE_DESCRIPTION("eseries UDC support");
MODULE_LICENSE("GPLv2");

220
arch/arm/mach-pxa/ezx.c Normal file
View file

@ -0,0 +1,220 @@
/*
* ezx.c - Common code for the EZX platform.
*
* Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
* 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
* 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <asm/setup.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/i2c.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "devices.h"
#include "generic.h"
static struct platform_pwm_backlight_data ezx_backlight_data = {
.pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
.pwm_period_ns = 78770,
};
static struct platform_device ezx_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &ezx_backlight_data,
},
};
static struct pxafb_mode_info mode_ezx_old = {
.pixclock = 150000,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 10,
.left_margin = 20,
.right_margin = 10,
.vsync_len = 2,
.upper_margin = 3,
.lower_margin = 2,
.sync = 0,
};
static struct pxafb_mach_info ezx_fb_info_1 = {
.modes = &mode_ezx_old,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static struct pxafb_mode_info mode_72r89803y01 = {
.pixclock = 192308,
.xres = 240,
.yres = 320,
.bpp = 32,
.depth = 18,
.hsync_len = 10,
.left_margin = 20,
.right_margin = 10,
.vsync_len = 2,
.upper_margin = 3,
.lower_margin = 2,
.sync = 0,
};
static struct pxafb_mach_info ezx_fb_info_2 = {
.modes = &mode_72r89803y01,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_18BPP,
};
static struct platform_device *devices[] __initdata = {
&ezx_backlight_device,
};
static unsigned long ezx_pin_config[] __initdata = {
/* PWM backlight */
GPIO16_PWM0_OUT,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* For A780 support (connected with Neptune GSM chip) */
GPIO30_USB_P3_2, /* ICL_TXENB */
GPIO31_USB_P3_6, /* ICL_VPOUT */
GPIO90_USB_P3_5, /* ICL_VPIN */
GPIO91_USB_P3_1, /* ICL_XRXD */
GPIO56_USB_P3_4, /* ICL_VMOUT */
GPIO113_USB_P3_3, /* /ICL_VMIN */
};
static void __init ezx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa_set_i2c_info(NULL);
if (machine_is_ezx_a780() || machine_is_ezx_e680())
set_pxa_fb_info(&ezx_fb_info_1);
else
set_pxa_fb_info(&ezx_fb_info_2);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
char **cmdline, struct meminfo *mi)
{
/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
* 16MB one at 0xAC000000
*/
mi->nr_banks = 2;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
mi->bank[0].size = (32*1024*1024);
mi->bank[1].start = 0xac000000;
mi->bank[1].node = 1;
mi->bank[1].size = (16*1024*1024);
}
#ifdef CONFIG_MACH_EZX_A780
MACHINE_START(EZX_A780, "Motorola EZX A780")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E680
MACHINE_START(EZX_E680, "Motorola EZX E680")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A1200
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A910
MACHINE_START(EZX_A910, "Motorola EZX A910")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E6
MACHINE_START(EZX_E6, "Motorola EZX E6")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E2
MACHINE_START(EZX_E2, "Motorola EZX E2")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = ezx_fixup,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = &ezx_init,
MACHINE_END
#endif

View file

@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/smc91x.h>
#include <asm/types.h>
#include <asm/setup.h>
@ -38,6 +39,7 @@
#include <asm/arch/pxafb.h>
#include <asm/arch/ssp.h>
#include <asm/arch/pxa27x_keypad.h>
#include <asm/arch/pxa3xx_nand.h>
#include <asm/arch/littleton.h>
#include "generic.h"
@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
[1] = {
.start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
.end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
}
};
static struct smc91x_platdata littleton_smc91x_info = {
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT |
SMC91X_NOWAIT | SMC91X_USE_DMA,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &littleton_smc91x_info,
},
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
/* use bit 30, 31 as the indicator of command parameter number */
#define CMD0(x) ((0x00000000) | ((x) << 9))
#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1))
@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
}
#else
static inline void littleton_init_lcd(void) {};
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int littleton_matrix_key_map[] = {
/* KEY(row, col, key_code) */
KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
static inline void littleton_init_keypad(void) {}
#endif
#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
static struct mtd_partition littleton_nand_partitions[] = {
[0] = {
.name = "Bootloader",
.offset = 0,
.size = 0x060000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[1] = {
.name = "Kernel",
.offset = 0x060000,
.size = 0x200000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
[2] = {
.name = "Filesystem",
.offset = 0x0260000,
.size = 0x3000000, /* 48M - rootfs */
},
[3] = {
.name = "MassStorage",
.offset = 0x3260000,
.size = 0x3d40000,
},
[4] = {
.name = "BBT",
.offset = 0x6FA0000,
.size = 0x80000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* NOTE: we reserve some blocks at the end of the NAND flash for
* bad block management, and the max number of relocation blocks
* differs on different platforms. Please take care with it when
* defining the partition table.
*/
};
static struct pxa3xx_nand_platform_data littleton_nand_info = {
.enable_arbiter = 1,
.parts = littleton_nand_partitions,
.nr_parts = ARRAY_SIZE(littleton_nand_partitions),
};
static void __init littleton_init_nand(void)
{
pxa3xx_set_nand_info(&littleton_nand_info);
}
#else
static inline void littleton_init_nand(void) {}
#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
static void __init littleton_init(void)
{
/* initialize MFP configurations */
@ -374,6 +435,7 @@ static void __init littleton_init(void)
littleton_init_lcd();
littleton_init_keypad();
littleton_init_nand();
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")

View file

@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/smc91x.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@ -226,14 +227,6 @@ static struct pxa2xx_spi_master pxa_ssp_master_info = {
.num_chipselect = 0,
};
static struct platform_device pxa_ssp = {
.name = "pxa2xx-spi",
.id = 1,
.dev = {
.platform_data = &pxa_ssp_master_info,
},
};
static int lubbock_ads7846_pendown_state(void)
{
/* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
@ -292,11 +285,18 @@ static struct resource smc91x_resources[] = {
},
};
static struct smc91x_platdata lubbock_smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &lubbock_smc91x_info,
},
};
static struct resource flash_resources[] = {
@ -367,7 +367,6 @@ static struct platform_device *devices[] __initdata = {
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
&pxa_ssp,
};
static struct pxafb_mode_info sharp_lm8v31_mode = {
@ -471,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
} else if (mode & IR_FIRMODE) {
LUB_MISC_WR |= 1 << 4;
}
pxa2xx_transceiver_mode(dev, mode);
local_irq_restore(flags);
}
@ -501,6 +501,7 @@ static void __init lubbock_init(void)
lubbock_flash_data[flashboot].name = "boot-rom";
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
}

View file

@ -17,17 +17,15 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mfd/htc-egpio.h>
#include <linux/mfd/htc-pasic3.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <asm/gpio.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@ -44,7 +42,7 @@
#include "devices.h"
#include "generic.h"
static unsigned long magician_pin_config[] = {
static unsigned long magician_pin_config[] __initdata = {
/* SDRAM and Static Memory I/O Signals */
GPIO20_nSDCS_2,
@ -134,6 +132,7 @@ static unsigned long magician_pin_config[] = {
static void magician_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data magician_ficp_info = {
@ -399,6 +398,7 @@ static struct platform_pwm_backlight_data backlight_data = {
static struct platform_device backlight = {
.name = "pwm-backlight",
.id = -1,
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &backlight_data,
@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
* External power
*/
static int power_supply_init(struct device *dev)
{
int ret;
ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
if (ret)
goto err_cs_ac;
ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
if (ret)
goto err_cs_usb;
ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
if (ret)
goto err_chg_en;
ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
if (!ret)
ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
if (ret)
goto err_nchg_en;
return 0;
err_nchg_en:
gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
err_chg_en:
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
err_cs_usb:
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
err_cs_ac:
return ret;
}
static int magician_is_ac_online(void)
{
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
}
static void power_supply_exit(struct device *dev)
{
gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
static char *magician_supplicants[] = {
"ds2760-battery.0", "backup-battery"
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = magician_is_ac_online,
.is_usb_online = magician_is_usb_online,
.set_charge = magician_set_charge,
.exit = power_supply_exit,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
};

View file

@ -26,6 +26,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <asm/types.h>
#include <asm/setup.h>
@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
GPIO45_AC97_SYSCLK,
/* Keypad */
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO94_KP_DKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO95_KP_DKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO93_KP_DKIN_0,
GPIO94_KP_DKIN_1,
GPIO95_KP_DKIN_2,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
}
};
static struct smc91x_platdata mainstone_smc91x_info = {
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
SMC91X_NOWAIT | SMC91X_USE_DMA,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &mainstone_smc91x_info,
},
};
static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@ -455,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
} else if (mode & IR_FIRMODE) {
MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
}
pxa2xx_transceiver_mode(dev, mode);
if (mode & IR_OFF) {
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
} else {
@ -513,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
.init = mainstone_ohci_init,
};
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int mainstone_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),

View file

@ -39,6 +39,28 @@ struct gpio_desc {
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
{
unsigned mask = GPIO_bit(gpio);
/* low power state */
switch (lpm) {
case MFP_LPM_DRIVE_HIGH:
PGSR(gpio) |= mask;
break;
case MFP_LPM_DRIVE_LOW:
PGSR(gpio) &= ~mask;
break;
case MFP_LPM_INPUT:
break;
default:
pr_warning("%s: invalid low power state for GPIO%d\n",
__func__, gpio);
return -EINVAL;
}
return 0;
}
static int __mfp_config_gpio(unsigned gpio, unsigned long c)
{
unsigned long gafr, mask = GPIO_bit(gpio);
@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
else
GPDR(gpio) &= ~mask;
/* low power state */
switch (c & MFP_LPM_STATE_MASK) {
case MFP_LPM_DRIVE_HIGH:
PGSR(gpio) |= mask;
break;
case MFP_LPM_DRIVE_LOW:
PGSR(gpio) &= ~mask;
break;
case MFP_LPM_INPUT:
break;
default:
pr_warning("%s: invalid low power state for GPIO%d\n",
__func__, gpio);
if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
return -EINVAL;
}
/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
* configurations of those pins not able to wakeup
@ -91,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
return 0;
}
static inline int __mfp_validate(int mfp)
{
int gpio = mfp_to_gpio(mfp);
if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
return -1;
}
return gpio;
}
void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
{
unsigned long flags;
@ -99,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
gpio = mfp_to_gpio(MFP_PIN(*c));
if (!gpio_desc[gpio].valid) {
pr_warning("%s: GPIO%d is invalid pin\n",
__func__, gpio);
gpio = __mfp_validate(MFP_PIN(*c));
if (gpio < 0)
continue;
}
local_irq_save(flags);
@ -116,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
}
}
void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
{
unsigned long flags;
int gpio;
gpio = __mfp_validate(mfp);
if (gpio < 0)
return;
local_irq_save(flags);
__mfp_config_lpm(gpio, lpm);
local_irq_restore(flags);
}
int gpio_set_wake(unsigned int gpio, unsigned int on)
{
struct gpio_desc *d;

416
arch/arm/mach-pxa/palmtx.c Normal file
View file

@ -0,0 +1,416 @@
/*
* Hardware definitions for PalmTX
*
* Author: Marek Vasut <marek.vasut@gmail.com>
*
* Based on work of:
* Alex Osborne <ato@meshy.org>
* Cristiano P. <cristianop@users.sourceforge.net>
* Jan Herman <2hp@seznam.cz>
* Michal Hrusecky
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* (find more info at www.hackndev.com)
*
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/audio.h>
#include <asm/arch/palmtx.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/irda.h>
#include <asm/arch/pxa27x_keypad.h>
#include <asm/arch/udc.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static unsigned long palmtx_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
/* IrDA */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
/* PWM */
GPIO16_PWM0_OUT,
/* USB */
GPIO13_GPIO,
/* PCMCIA */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO79_PSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
void *data)
{
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
return err;
}
err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
if (err)
goto pwr_err;
err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
if (err)
goto ro_err;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
ro_err:
gpio_free(GPIO_NR_PALMTX_SD_POWER);
pwr_err:
free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
return err;
}
static void palmtx_mci_exit(struct device *dev, void *data)
{
gpio_free(GPIO_NR_PALMTX_SD_READONLY);
gpio_free(GPIO_NR_PALMTX_SD_POWER);
free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
}
static void palmtx_mci_power(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data *p_d = dev->platform_data;
gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
}
static int palmtx_mci_get_ro(struct device *dev)
{
return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
}
static struct pxamci_platform_data palmtx_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.setpower = palmtx_mci_power,
.get_ro = palmtx_mci_get_ro,
.init = palmtx_mci_init,
.exit = palmtx_mci_exit,
};
/******************************************************************************
* GPIO keyboard
******************************************************************************/
static unsigned int palmtx_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
KEY(0, 2, KEY_ENTER),
KEY(1, 0, KEY_F2),
KEY(1, 1, KEY_F3),
KEY(1, 2, KEY_F4),
KEY(2, 0, KEY_UP),
KEY(2, 2, KEY_DOWN),
KEY(3, 0, KEY_RIGHT),
KEY(3, 2, KEY_LEFT),
};
static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
.matrix_key_rows = 4,
.matrix_key_cols = 3,
.matrix_key_map = palmtx_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(palmtx_matrix_keys),
.debounce_interval = 30,
};
/******************************************************************************
* GPIO keys
******************************************************************************/
static struct gpio_keys_button palmtx_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
};
static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
.buttons = palmtx_pxa_buttons,
.nbuttons = ARRAY_SIZE(palmtx_pxa_buttons),
};
static struct platform_device palmtx_pxa_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &palmtx_pxa_keys_data,
},
};
/******************************************************************************
* Backlight
******************************************************************************/
static int palmtx_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
if (ret)
goto err;
ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
return 0;
err2:
gpio_free(GPIO_NR_PALMTX_BL_POWER);
err:
return ret;
}
static int palmtx_backlight_notify(int brightness)
{
gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
return brightness;
}
static void palmtx_backlight_exit(struct device *dev)
{
gpio_free(GPIO_NR_PALMTX_BL_POWER);
gpio_free(GPIO_NR_PALMTX_LCD_POWER);
}
static struct platform_pwm_backlight_data palmtx_backlight_data = {
.pwm_id = 0,
.max_brightness = PALMTX_MAX_INTENSITY,
.dft_brightness = PALMTX_MAX_INTENSITY,
.pwm_period_ns = PALMTX_PERIOD_NS,
.init = palmtx_backlight_init,
.notify = palmtx_backlight_notify,
.exit = palmtx_backlight_exit,
};
static struct platform_device palmtx_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &palmtx_backlight_data,
},
};
/******************************************************************************
* IrDA
******************************************************************************/
static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
pxa2xx_transceiver_mode(dev, mode);
}
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmtx_irda_transceiver_mode,
};
/******************************************************************************
* UDC
******************************************************************************/
static void palmtx_udc_command(int cmd)
{
gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
udelay(50);
gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
}
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.udc_command = palmtx_udc_command,
};
/******************************************************************************
* Power supply
******************************************************************************/
static int power_supply_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
goto err_cs_ac;
ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
if (ret)
goto err_cs_usb;
return 0;
err_cs_usb:
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
err_cs_ac:
return ret;
}
static int palmtx_is_ac_online(void)
{
return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
}
static int palmtx_is_usb_online(void)
{
return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
}
static void power_supply_exit(struct device *dev)
{
gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
}
static char *palmtx_supplicants[] = {
"main-battery",
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmtx_is_ac_online,
.is_usb_online = palmtx_is_usb_online,
.exit = power_supply_exit,
.supplied_to = palmtx_supplicants,
.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
};
static struct platform_device power_supply = {
.name = "pda-power",
.id = -1,
.dev = {
.platform_data = &power_supply_info,
},
};
/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmtx_lcd_modes[] = {
{
.pixclock = 57692,
.xres = 320,
.yres = 480,
.bpp = 16,
.left_margin = 32,
.right_margin = 1,
.upper_margin = 7,
.lower_margin = 1,
.hsync_len = 4,
.vsync_len = 1,
},
};
static struct pxafb_mach_info palmtx_lcd_screen = {
.modes = palmtx_lcd_modes,
.num_modes = ARRAY_SIZE(palmtx_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&palmtx_pxa_keys,
#endif
&palmtx_backlight,
&power_supply,
};
static struct map_desc palmtx_io_desc[] __initdata = {
{
.virtual = PALMTX_PCMCIA_VIRT,
.pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
.length = PALMTX_PCMCIA_SIZE,
.type = MT_DEVICE
},
};
static void __init palmtx_map_io(void)
{
pxa_map_io();
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(PALMTX, "Palm T|X")
.phys_io = PALMTX_PHYS_IO_START,
.io_pg_offst = io_p2v(0x40000000),
.boot_params = 0xa0000100,
.map_io = palmtx_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = palmtx_init
MACHINE_END

Some files were not shown because too many files have changed in this diff Show more