[MIPS] MT: Enable coexistence of AP/SP with VSMP and SMTC.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ralf Baechle 2007-07-27 19:31:10 +01:00
parent c3a005f4b6
commit 07cc0c9e65
7 changed files with 203 additions and 169 deletions

View File

@ -1377,17 +1377,6 @@ config MIPS_MT_SMTC
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
config MIPS_VPE_LOADER
bool "VPE loader support."
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select CPU_MIPSR2_SRS
select MIPS_MT
help
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
endchoice
config MIPS_MT
@ -1398,8 +1387,19 @@ config SYS_SUPPORTS_MULTITHREADING
config MIPS_MT_FPAFF
bool "Dynamic FPU affinity for FP-intensive threads"
depends on MIPS_MT
default y
depends on MIPS_MT_SMP || MIPS_MT_SMTC
config MIPS_VPE_LOADER
bool "VPE loader support."
depends on SYS_SUPPORTS_MULTITHREADING
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_IRQ_EI
select CPU_MIPSR2_SRS
select MIPS_MT
help
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
config MIPS_MT_SMTC_INSTANT_REPLAY
bool "Low-latency Dispatch of Deferred SMTC IPIs"

View File

@ -89,7 +89,7 @@ static int sp_stopping = 0;
#define MTSP_O_EXCL 0x0800
#define MTSP_O_BINARY 0x8000
#define SP_VPE 1
extern int tclimit;
struct apsp_table {
int sp;
@ -225,8 +225,8 @@ void sp_work_handle_request(void)
/* Run the syscall at the priviledge of the user who loaded the
SP program */
if (vpe_getuid(SP_VPE))
sp_setfsuidgid( vpe_getuid(SP_VPE), vpe_getgid(SP_VPE));
if (vpe_getuid(tclimit))
sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
switch (sc.cmd) {
/* needs the flags argument translating from SDE kit to
@ -245,7 +245,7 @@ void sp_work_handle_request(void)
case MTSP_SYSCALL_EXIT:
list_for_each_entry(n, &kspd_notifylist, list)
n->kspd_sp_exit(SP_VPE);
n->kspd_sp_exit(tclimit);
sp_stopping = 1;
printk(KERN_DEBUG "KSPD got exit syscall from SP exitcode %d\n",
@ -255,7 +255,7 @@ void sp_work_handle_request(void)
case MTSP_SYSCALL_OPEN:
generic.arg1 = translate_open_flags(generic.arg1);
vcwd = vpe_getcwd(SP_VPE);
vcwd = vpe_getcwd(tclimit);
/* change to the cwd of the process that loaded the SP program */
old_fs = get_fs();
@ -283,7 +283,7 @@ void sp_work_handle_request(void)
break;
} /* switch */
if (vpe_getuid(SP_VPE))
if (vpe_getuid(tclimit))
sp_setfsuidgid( 0, 0);
old_fs = get_fs();
@ -364,10 +364,9 @@ static void startwork(int vpe)
}
INIT_WORK(&work, sp_work);
queue_work(workqueue, &work);
} else
queue_work(workqueue, &work);
}
queue_work(workqueue, &work);
}
static void stopwork(int vpe)
@ -389,7 +388,7 @@ static int kspd_module_init(void)
notify.start = startwork;
notify.stop = stopwork;
vpe_notify(SP_VPE, &notify);
vpe_notify(tclimit, &notify);
return 0;
}

View File

@ -21,6 +21,28 @@
#include <asm/r4kcache.h>
#include <asm/cacheflush.h>
int vpelimit;
static int __init maxvpes(char *str)
{
get_option(&str, &vpelimit);
return 1;
}
__setup("maxvpes=", maxvpes);
int tclimit;
static int __init maxtcs(char *str)
{
get_option(&str, &tclimit);
return 1;
}
__setup("maxtcs=", maxtcs);
/*
* Dump new MIPS MT state for the core. Does not leave TCs halted.
* Takes an argument which taken to be a pre-call MVPControl value.

View File

@ -40,12 +40,11 @@
#include <asm/atomic.h>
#include <asm/cpu.h>
#include <asm/processor.h>
#include <asm/mips_mt.h>
#include <asm/system.h>
#include <asm/vpe.h>
#include <asm/rtlx.h>
#define RTLX_TARG_VPE 1
static struct rtlx_info *rtlx;
static int major;
static char module_name[] = "rtlx";
@ -165,10 +164,10 @@ int rtlx_open(int index, int can_sleep)
}
if (rtlx == NULL) {
if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
if( (p = vpe_get_shared(tclimit)) == NULL) {
if (can_sleep) {
__wait_event_interruptible(channel_wqs[index].lx_queue,
(p = vpe_get_shared(RTLX_TARG_VPE)),
(p = vpe_get_shared(tclimit)),
ret);
if (ret)
goto out_fail;
@ -477,6 +476,19 @@ static int rtlx_module_init(void)
struct device *dev;
int i, err;
if (!cpu_has_mipsmt) {
printk("VPE loader: not a MIPS MT capable processor\n");
return -ENODEV;
}
if (tclimit == 0) {
printk(KERN_WARNING "No TCs reserved for AP/SP, not "
"initializing RTLX.\nPass maxtcs=<n> argument as kernel "
"argument\n");
return -ENODEV;
}
major = register_chrdev(0, module_name, &rtlx_fops);
if (major < 0) {
printk(register_chrdev_failed);
@ -501,7 +513,7 @@ static int rtlx_module_init(void)
/* set up notifiers */
notify.start = starting;
notify.stop = stopping;
vpe_notify(RTLX_TARG_VPE, &notify);
vpe_notify(tclimit, &notify);
if (cpu_has_vint)
set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);

View File

@ -86,25 +86,11 @@ unsigned int smtc_status = 0;
/* Boot command line configuration overrides */
static int vpelimit = 0;
static int tclimit = 0;
static int ipibuffers = 0;
static int nostlb = 0;
static int asidmask = 0;
unsigned long smtc_asid_mask = 0xff;
static int __init maxvpes(char *str)
{
get_option(&str, &vpelimit);
return 1;
}
static int __init maxtcs(char *str)
{
get_option(&str, &tclimit);
return 1;
}
static int __init ipibufs(char *str)
{
get_option(&str, &ipibuffers);
@ -137,8 +123,6 @@ static int __init asidmask_set(char *str)
return 1;
}
__setup("maxvpes=", maxvpes);
__setup("maxtcs=", maxtcs);
__setup("ipibufs=", ipibufs);
__setup("nostlb", stlb_disable);
__setup("asidmask=", asidmask_set);

View File

@ -27,7 +27,6 @@
* To load and run, simply cat a SP 'program file' to /dev/vpe1.
* i.e cat spapp >/dev/vpe1.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
@ -54,6 +53,7 @@
#include <asm/system.h>
#include <asm/vpe.h>
#include <asm/kspd.h>
#include <asm/mips_mt.h>
typedef void *vpe_handle;
@ -132,14 +132,9 @@ struct tc {
enum tc_state state;
int index;
/* parent VPE */
struct vpe *pvpe;
/* The list of TC's with this VPE */
struct list_head tc;
/* The global list of tc's */
struct list_head list;
struct vpe *pvpe; /* parent VPE */
struct list_head tc; /* The list of TC's with this VPE */
struct list_head list; /* The global list of tc's */
};
struct {
@ -217,18 +212,17 @@ struct vpe *alloc_vpe(int minor)
/* allocate a tc. At startup only tc0 is running, all other can be halted. */
struct tc *alloc_tc(int index)
{
struct tc *t;
struct tc *tc;
if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
return NULL;
}
if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
goto out;
INIT_LIST_HEAD(&t->tc);
list_add_tail(&t->list, &vpecontrol.tc_list);
INIT_LIST_HEAD(&tc->tc);
tc->index = index;
list_add_tail(&tc->list, &vpecontrol.tc_list);
t->index = index;
return t;
out:
return tc;
}
/* clean up and free everything */
@ -663,66 +657,48 @@ static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
}
#endif
static void dump_tc(struct tc *t)
{
unsigned long val;
settc(t->index);
printk(KERN_DEBUG "VPE loader: TC index %d targtc %ld "
"TCStatus 0x%lx halt 0x%lx\n",
t->index, read_c0_vpecontrol() & VPECONTROL_TARGTC,
read_tc_c0_tcstatus(), read_tc_c0_tchalt());
printk(KERN_DEBUG " tcrestart 0x%lx\n", read_tc_c0_tcrestart());
printk(KERN_DEBUG " tcbind 0x%lx\n", read_tc_c0_tcbind());
val = read_c0_vpeconf0();
printk(KERN_DEBUG " VPEConf0 0x%lx MVP %ld\n", val,
(val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
printk(KERN_DEBUG " c0 status 0x%lx\n", read_vpe_c0_status());
printk(KERN_DEBUG " c0 cause 0x%lx\n", read_vpe_c0_cause());
printk(KERN_DEBUG " c0 badvaddr 0x%lx\n", read_vpe_c0_badvaddr());
printk(KERN_DEBUG " c0 epc 0x%lx\n", read_vpe_c0_epc());
}
static void dump_tclist(void)
{
struct tc *t;
list_for_each_entry(t, &vpecontrol.tc_list, list) {
dump_tc(t);
}
}
/* We are prepared so configure and start the VPE... */
static int vpe_run(struct vpe * v)
{
unsigned long flags, val, dmt_flag;
struct vpe_notifications *n;
unsigned long val, dmt_flag;
unsigned int vpeflags;
struct tc *t;
/* check we are the Master VPE */
local_irq_save(flags);
val = read_c0_vpeconf0();
if (!(val & VPECONF0_MVP)) {
printk(KERN_WARNING
"VPE loader: only Master VPE's are allowed to configure MT\n");
local_irq_restore(flags);
return -1;
}
/* disable MT (using dvpe) */
dvpe();
dmt_flag = dmt();
vpeflags = dvpe();
if (!list_empty(&v->tc)) {
if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
printk(KERN_WARNING "VPE loader: TC %d is already in use.\n",
t->index);
evpe(vpeflags);
emt(dmt_flag);
local_irq_restore(flags);
printk(KERN_WARNING
"VPE loader: TC %d is already in use.\n",
t->index);
return -ENOEXEC;
}
} else {
printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n",
evpe(vpeflags);
emt(dmt_flag);
local_irq_restore(flags);
printk(KERN_WARNING
"VPE loader: No TC's associated with VPE %d\n",
v->minor);
return -ENOEXEC;
}
@ -733,21 +709,20 @@ static int vpe_run(struct vpe * v)
/* should check it is halted, and not activated */
if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
printk(KERN_WARNING "VPE loader: TC %d is already doing something!\n",
evpe(vpeflags);
emt(dmt_flag);
local_irq_restore(flags);
printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
t->index);
dump_tclist();
return -ENOEXEC;
}
/*
* Disable multi-threaded execution whilst we activate, clear the
* halt bit and bound the tc to the other VPE...
*/
dmt_flag = dmt();
/* Write the address we want it to start running from in the TCPC register. */
write_tc_c0_tcrestart((unsigned long)v->__start);
write_tc_c0_tccontext((unsigned long)0);
/*
* Mark the TC as activated, not interrupt exempt and not dynamically
* allocatable
@ -763,15 +738,14 @@ static int vpe_run(struct vpe * v)
* here... Or set $a3 to zero and define DFLT_STACK_SIZE and
* DFLT_HEAP_SIZE when you compile your program
*/
mttgpr(7, physical_memsize);
mttgpr(7, physical_memsize);
/* set up VPE1 */
/*
* bind the TC to VPE 1 as late as possible so we only have the final
* VPE registers to set up, and so an EJTAG probe can trigger on it
*/
write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor);
write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
@ -793,15 +767,16 @@ static int vpe_run(struct vpe * v)
/* take system out of configuration state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
/* now safe to re-enable multi-threading */
emt(dmt_flag);
/* set it running */
#ifdef CONFIG_SMP
evpe(EVPE_ENABLE);
#else
evpe(vpeflags);
#endif
emt(dmt_flag);
local_irq_restore(flags);
list_for_each_entry(n, &v->notify, list) {
n->start(v->minor);
}
list_for_each_entry(n, &v->notify, list)
n->start(minor);
return 0;
}
@ -1023,23 +998,15 @@ static int vpe_elfload(struct vpe * v)
return 0;
}
void __used dump_vpe(struct vpe * v)
{
struct tc *t;
settc(v->minor);
printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
list_for_each_entry(t, &vpecontrol.tc_list, list)
dump_tc(t);
}
static void cleanup_tc(struct tc *tc)
{
unsigned long flags;
unsigned int mtflags, vpflags;
int tmp;
local_irq_save(flags);
mtflags = dmt();
vpflags = dvpe();
/* Put MVPE's into 'configuration state' */
set_c0_mvpcontrol(MVPCONTROL_VPC);
@ -1054,9 +1021,12 @@ static void cleanup_tc(struct tc *tc)
write_tc_c0_tchalt(TCHALT_H);
/* bind it to anything other than VPE1 */
write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
// write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
clear_c0_mvpcontrol(MVPCONTROL_VPC);
evpe(vpflags);
emt(mtflags);
local_irq_restore(flags);
}
static int getcwd(char *buff, int size)
@ -1077,36 +1047,32 @@ static int getcwd(char *buff, int size)
/* checks VPE is unused and gets ready to load program */
static int vpe_open(struct inode *inode, struct file *filp)
{
int minor, ret;
enum vpe_state state;
struct vpe *v;
struct vpe_notifications *not;
struct vpe *v;
int ret;
/* assume only 1 device at the mo. */
if ((minor = iminor(inode)) != 1) {
if (minor != iminor(inode)) {
/* assume only 1 device at the moment. */
printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
return -ENODEV;
}
if ((v = get_vpe(minor)) == NULL) {
if ((v = get_vpe(tclimit)) == NULL) {
printk(KERN_WARNING "VPE loader: unable to get vpe\n");
return -ENODEV;
}
state = xchg(&v->state, VPE_STATE_INUSE);
if (state != VPE_STATE_UNUSED) {
dvpe();
printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
dump_tc(get_tc(minor));
list_for_each_entry(not, &v->notify, list) {
not->stop(minor);
not->stop(tclimit);
}
release_progmem(v->load_addr);
cleanup_tc(get_tc(minor));
cleanup_tc(get_tc(tclimit));
}
/* this of-course trashes what was there before... */
@ -1133,26 +1099,25 @@ static int vpe_open(struct inode *inode, struct file *filp)
v->shared_ptr = NULL;
v->__start = 0;
return 0;
}
static int vpe_release(struct inode *inode, struct file *filp)
{
int minor, ret = 0;
struct vpe *v;
Elf_Ehdr *hdr;
int ret = 0;
minor = iminor(inode);
if ((v = get_vpe(minor)) == NULL)
v = get_vpe(tclimit);
if (v == NULL)
return -ENODEV;
// simple case of fire and forget, so tell the VPE to run...
hdr = (Elf_Ehdr *) v->pbuffer;
if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
if (vpe_elfload(v) >= 0)
if (vpe_elfload(v) >= 0) {
vpe_run(v);
else {
} else {
printk(KERN_WARNING "VPE loader: ELF load failed.\n");
ret = -ENOEXEC;
}
@ -1179,12 +1144,14 @@ static int vpe_release(struct inode *inode, struct file *filp)
static ssize_t vpe_write(struct file *file, const char __user * buffer,
size_t count, loff_t * ppos)
{
int minor;
size_t ret = count;
struct vpe *v;
minor = iminor(file->f_path.dentry->d_inode);
if ((v = get_vpe(minor)) == NULL)
if (iminor(file->f_path.dentry->d_inode) != minor)
return -ENODEV;
v = get_vpe(tclimit);
if (v == NULL)
return -ENODEV;
if (v->pbuffer == NULL) {
@ -1370,17 +1337,34 @@ static struct device *vpe_dev;
static int __init vpe_module_init(void)
{
unsigned int mtflags, vpflags;
int hw_tcs, hw_vpes, tc, err = 0;
unsigned long flags, val;
struct vpe *v = NULL;
struct device *dev;
struct tc *t;
unsigned long val;
int i, err;
if (!cpu_has_mipsmt) {
printk("VPE loader: not a MIPS MT capable processor\n");
return -ENODEV;
}
if (vpelimit == 0) {
printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
"initializing VPE loader.\nPass maxvpes=<n> argument as "
"kernel argument\n");
return -ENODEV;
}
if (tclimit == 0) {
printk(KERN_WARNING "No TCs reserved for AP/SP, not "
"initializing VPE loader.\nPass maxtcs=<n> argument as "
"kernel argument\n");
return -ENODEV;
}
major = register_chrdev(0, module_name, &vpe_fops);
if (major < 0) {
printk("VPE loader: unable to register character device\n");
@ -1388,40 +1372,61 @@ static int __init vpe_module_init(void)
}
dev = device_create(mt_class, NULL, MKDEV(major, minor),
"tc%d", minor);
"vpe%d", minor);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_chrdev;
}
vpe_dev = dev;
dmt();
dvpe();
local_irq_save(flags);
mtflags = dmt();
vpflags = dvpe();
/* Put MVPE's into 'configuration state' */
set_c0_mvpcontrol(MVPCONTROL_VPC);
/* dump_mtregs(); */
val = read_c0_mvpconf0();
for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
t = alloc_tc(i);
hw_tcs = (val & MVPCONF0_PTC) + 1;
hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
for (tc = tclimit; tc < hw_tcs; tc++) {
/*
* Must re-enable multithreading temporarily or in case we
* reschedule send IPIs or similar we might hang.
*/
clear_c0_mvpcontrol(MVPCONTROL_VPC);
evpe(vpflags);
emt(mtflags);
local_irq_restore(flags);
t = alloc_tc(tc);
if (!t) {
err = -ENOMEM;
goto out;
}
local_irq_save(flags);
mtflags = dmt();
vpflags = dvpe();
set_c0_mvpcontrol(MVPCONTROL_VPC);
/* VPE's */
if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
settc(i);
if (tc < hw_tcs) {
settc(tc);
if ((v = alloc_vpe(i)) == NULL) {
if ((v = alloc_vpe(tc)) == NULL) {
printk(KERN_WARNING "VPE: unable to allocate VPE\n");
return -ENODEV;
goto out_reenable;
}
/* add the tc to the list of this vpe's tc's. */
list_add(&t->tc, &v->tc);
/* deactivate all but vpe0 */
if (i != 0) {
if (tc >= tclimit) {
unsigned long tmp = read_vpe_c0_vpeconf0();
tmp &= ~VPECONF0_VPA;
@ -1434,7 +1439,7 @@ static int __init vpe_module_init(void)
/* disable multi-threading with TC's */
write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
if (i != 0) {
if (tc >= vpelimit) {
/*
* Set config to be the same as vpe0,
* particularly kseg0 coherency alg
@ -1446,10 +1451,10 @@ static int __init vpe_module_init(void)
/* TC's */
t->pvpe = v; /* set the parent vpe */
if (i != 0) {
if (tc >= tclimit) {
unsigned long tmp;
settc(i);
settc(tc);
/* Any TC that is bound to VPE0 gets left as is - in case
we are running SMTC on VPE0. A TC that is bound to any
@ -1479,9 +1484,14 @@ static int __init vpe_module_init(void)
}
}
out_reenable:
/* release config state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
evpe(vpflags);
emt(mtflags);
local_irq_restore(flags);
#ifdef CONFIG_MIPS_APSP_KSPD
kspd_events.kspd_sp_exit = kspd_sp_exit;
#endif
@ -1490,6 +1500,7 @@ static int __init vpe_module_init(void)
out_chrdev:
unregister_chrdev(major, module_name);
out:
return err;
}

View File

@ -8,6 +8,12 @@
#include <linux/cpumask.h>
/*
* How many VPEs and TCs is Linux allowed to use? 0 means no limit.
*/
extern int tclimit;
extern int vpelimit;
extern cpumask_t mt_fpu_cpumask;
extern unsigned long mt_fpemul_threshold;