system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-09-21 03:28:37 +00:00
Code Issues Packages Projects Releases Wiki Activity

ARM: DT updates for v4.9

Browse source 
These are as usual a very large number of mostly boring updates to
 enable devices in existing machines, or to fix minor bugs.  Notably,
 an ongoing treewide effort to fix warnings caused by an update to the
 device tree compiler. These are enabled with "make W=1" at the moment
 but can hopefully become the default once all issues have been addressed.
 
 No new SoC platform is added this time around (Armada 395 and Orion
 mv88f5181 are slight variations of existing ones), but a significant
 number of new dts files are added, which I list by platform:
 
 - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets;
 	Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E,
 	Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo
 	single-board computers
 
 - ARM Realview: all supported machines (ported from board files)
 
 - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
 	BCM958622hr reference boards for Northstar platform;
 	Raspberry Pi Zero single-board computer
 
 - Marvell EBU: Netgear WNR854T router (ported from board file);
 	Armada 395 SoC platform and GP board
 	Armada 390 DB development board
 
 - NXP i.MX: imx7s Warp7 reference board;
 	Gateworks Ventana GW553x single-board computer,
 	Technologic Systems TS-4900 and
 	Engicam IMX6UL GEA M6UL computer-on-module,
 	Inverse Path USB armory board
 
 - Qualcomm: LG Nexus 5 Phone
 
 - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards
 
 - Rockchip: Rockchip RK3288 Fennec reference board;
 	Firefly RK3288 Reload platform
 
 - ST Microelectronics STi: B2260 (96boards) single-board computer
 
 - TI Davinci: OMAP-L138 LCDK Development kit
 
 - TI OMAP: beagleboard-x15 rev B1 single-board computer
 
 Conflicts: vendor-prefixes.txt has conflicting additions, keep all of
 them in alphabetical order.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/g11mCrR//JCVInAQIWbw/9FOrBghI2bFqZkDwFE8E3QCpc9bIiETMx
 FMdHV6FAo0D6Yp4EqlWjFI0u0Kn9l4FKz0SYWAigpfT6gfeI1THC2Kl31mslvb5U
 v3QreXI4rKjZS/B1lYECee0os+fNvJcWKj3uFjb4VT1k7T6+MytjHGAQSzwxM66Q
 0Lp5HjdFGDrOXoIUx2eEZkZlVXyQ2EFocMoAsj+s/MHnA8fn1tWW08633kjTsC6y
 9Xj71joghlDKZjA56htaEQ+/6dYdxAHVlvkN7aL9di+2Sc2/ma6my70Zvs4zwtOv
 uJDhcJhjwvf3QtDuOoGhTnFtQYQWaONaGUFyEwYyy2kIwiJy0afep4JCq2o+/CZM
 VMvGXepJpVujE9mg+LwHPgaMYgBhswsJzwQ2ZESrMQcUZ624E18dG2/ei5zat4UN
 5/NvzxEoDGmfQFQUpuoZuPqhwLRauXr7I+u4aliIdtSBGeaA2T1yFT4pVgNUOxBQ
 0bMtE2QSUKyaF+xAHLTsV7yheDU0S+C7zVkLPwePK0V7vUFuBsdQiXEqXh/6MSq0
 iYVPmKwNTIHK3qMiGtm8XDugjR8Pf0tCXRqIWJMlXs75rCAsKfFW4j4XYnlO4wMy
 dP2fdoe0xA+zthR0hRHD5i8WCmISeUgtPAdFyTid1jZkMk1AzM0AqBUdAqTInvQ3
 O4JSYcjBWoo=
 =/gg/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are as usual a very large number of mostly boring updates to
  enable devices in existing machines, or to fix minor bugs. Notably, an
  ongoing treewide effort to fix warnings caused by an update to the
  device tree compiler. These are enabled with "make W=1" at the moment
  but can hopefully become the default once all issues have been
  addressed.

  No new SoC platform is added this time around (Armada 395 and Orion
  mv88f5181 are slight variations of existing ones), but a significant
  number of new dts files are added, which I list by platform:

   - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets,
     Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite,
     Olimex A33-Olinuxino, and Nano Pi Neo single-board computers

   - ARM Realview: all supported machines (ported from board files)

   - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
     BCM958622hr reference boards for Northstar platform, Raspberry Pi
     Zero single-board computer

   - Marvell EBU: Netgear WNR854T router (ported from board file),
     Armada 395 SoC platform and GP board Armada 390 DB development
     board

   - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x
     single-board computer, Technologic Systems TS-4900 and Engicam
     IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board

   - Qualcomm: LG Nexus 5 Phone

   - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards

   - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288
     Reload platform

   - ST Microelectronics STi: B2260 (96boards) single-board computer

   - TI Davinci: OMAP-L138 LCDK Development kit

   - TI OMAP: beagleboard-x15 rev B1 single-board computer"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits)
  ARM: dts: sony-nsz-gs7: add missing unit name to /memory node
  ARM: dts: chromecast: add missing unit name to /memory node
  ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node
  ARM: dts: berlin2: Add missing unit name to /soc node
  ARM: dts: berlin2cd: Add missing unit name to /soc node
  ARM: dts: berlin2q: Add missing unit name to /soc node
  ARM: dts: berlin2: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2q: Remove skeleton.dtsi inclusion
  arm: dts: berlin2q: enable all wdt nodes unconditionally
  arm: dts: berlin2: enable all wdt nodes unconditionally
  ARM: dts: omap5-igep0050.dts: Use tabs for indentation
  ARM: dts: Fix igepv5 power button GPIO direction
  ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes
  ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: s3c64xx: Use macros for pinctrl configuration
  ARM: dts: s3c2416: Use macros for pinctrl configuration
  ARM: dts: s5pv210: Use macros for pinctrl configuration
  ARM: dts: s3c64xx: Use common macros for pinctrl configuration
  ...
This commit is contained in:
Linus Torvalds 2016-10-07 21:29:04 -07:00
parent 6afd563d4b adff807988
commit 00e729c933
408 changed files with 16291 additions and 5462 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt
View file

@ -38,6 +38,10 @@ Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
Raspberry Pi Zero
Required root node properties:
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
Generic BCM2835 board
Required root node properties:
compatible = "brcm,bcm2835";

4
Documentation/devicetree/bindings/arm/davinci.txt
View file

@ -5,6 +5,10 @@ DA850/OMAP-L138/AM18x Evaluation Module (EVM) board
Required root node properties:
- compatible = "ti,da850-evm", "ti,da850";
DA850/OMAP-L138/AM18x L138/C6748 Development Kit (LCDK) board
Required root node properties:
- compatible = "ti,da850-lcdk", "ti,da850";
EnBW AM1808 based CMC board
Required root node properties:
- compatible = "enbw,cmc", "ti,da850;

15
Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
View file

@ -8,8 +8,19 @@ Required root node property:
- compatible: must contain "marvell,armada390"
In addition, boards using the Marvell Armada 398 SoC shall have the
following property before the previous one:
In addition, boards using the Marvell Armada 395 SoC shall have the
following property before the common "marvell,armada390" one:
Required root node property:
compatible: must contain "marvell,armada395"
Example:
compatible = "marvell,a395-gp", "marvell,armada395", "marvell,armada390";
Boards using the Marvell Armada 398 SoC shall have the following
property before the common "marvell,armada390" one:
Required root node property:

25
Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt Normal file
View file

@ -0,0 +1,25 @@
Marvell Orion SoC Family Device Tree Bindings
---------------------------------------------
Boards with a SoC of the Marvell Orion family, eg 88f5181
* Required root node properties:
compatible: must contain "marvell,orion5x"
In addition, the above compatible shall be extended with the specific
SoC. Currently known SoC compatibles are:
"marvell,orion5x-88f5181"
"marvell,orion5x-88f5182"
And in addition, the compatible shall be extended with the specific
board. Currently known boards are:
"buffalo,lsgl"
"buffalo,lswsgl"
"buffalo,lswtgl"
"lacie,ethernet-disk-mini-v2"
"lacie,d2-network"
"marvell,rd-88f5182-nas"
"maxtor,shared-storage-2"
"netgear,wnr854t"

6
Documentation/devicetree/bindings/arm/omap/omap.txt
View file

@ -180,3 +180,9 @@ Boards:
- DRA722 EVM: Software Development Board for DRA722
compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"
- DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3"
- DM3730 Logic PD SOM-LV: Commercial System on Module with WiFi and Bluetooth
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"

8
Documentation/devicetree/bindings/arm/rockchip.txt
View file

@ -31,6 +31,10 @@ Rockchip platforms device tree bindings
or
- compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
- Firefly Firefly-RK3288 Reload board:
Required root node properties:
- compatible = "firefly,firefly-rk3288-reload", "rockchip,rk3288";
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
@ -110,6 +114,10 @@ Rockchip platforms device tree bindings
- Rockchip RK3229 Evaluation board:
- compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
- Rockchip RK3288 Fennec board:
Required root node properties:
- compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
- Rockchip RK3399 evb:
Required root node properties:
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399";

4
Documentation/devicetree/bindings/arm/shmobile.txt
View file

@ -63,9 +63,13 @@ Boards:
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
compatible = "renesas,porter", "renesas,r8a7791"
- RSKRZA1 (YR0K77210C000BE)
compatible = "renesas,rskrza1", "renesas,r7s72100"
- Salvator-X (RTP0RC7795SIPB0010S)
compatible = "renesas,salvator-x", "renesas,r8a7795";
- Salvator-X
compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
- Wheat
compatible = "renesas,wheat", "renesas,r8a7792"

6
Documentation/devicetree/bindings/arm/technologic.txt
View file

@ -4,3 +4,9 @@ Technologic Systems Platforms Device Tree Bindings
TS-4800 board
Required root node properties:
- compatible = "technologic,imx51-ts4800", "fsl,imx51";
TS-4900 is a System-on-Module based on the Freescale i.MX6 System-on-Chip.
It can be mounted on a carrier board providing additional peripheral connectors.
Required root node properties:
- compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl"
- compatible = "technologic,imx6q-ts4900", "fsl,imx6q"

16
Documentation/devicetree/bindings/clock/qcom,gcc.txt
View file

@ -23,6 +23,11 @@ Required properties :
Optional properties :
- #power-domain-cells : shall contain 1
- Qualcomm TSENS (thermal sensor device) on some devices can
be part of GCC and hence the TSENS properties can also be
part of the GCC/clock-controller node.
For more details on the TSENS properties please refer
Documentation/devicetree/bindings/thermal/qcom-tsens.txt
Example:
clock-controller@900000 {
@ -32,3 +37,14 @@ Example:
#reset-cells = <1>;
#power-domain-cells = <1>;
};
Example of GCC with TSENS properties:
clock-controller@900000 {
compatible = "qcom,gcc-apq8064";
reg = <0x00900000 0x4000>;
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
#clock-cells = <1>;
#reset-cells = <1>;
#thermal-sensor-cells = <1>;
};

4
Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
View file

@ -9,7 +9,7 @@ Required properties:
- reg: physical base address of the hdmi and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
- hpd-gpio: following information about the hotplug gpio pin.
- hpd-gpios: following information about the hotplug gpio pin.
a) phandle of the gpio controller node.
b) pin number within the gpio controller.
c) optional flags and pull up/down.
@ -56,7 +56,7 @@ Example:
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x100000>;
interrupts = <0 95 0>;
hpd-gpio = <&gpx3 7 1>;
hpd-gpios = <&gpx3 7 1>;
ddc = <&hdmi_ddc_node>;
phy = <&hdmi_phy_node>;
samsung,syscon-phandle = <&pmu_system_controller>;

47
Documentation/devicetree/bindings/display/panel/tpo,tpg110.txt Normal file
View file

@ -0,0 +1,47 @@
TPO TPG110 Panel
================
This binding builds on the DPI bindings, adding a few properties
as a superset of a DPI. See panel-dpi.txt for the required DPI
bindings.
Required properties:
- compatible : "tpo,tpg110"
- grestb-gpios : panel reset GPIO
- scen-gpios : serial control enable GPIO
- scl-gpios : serial control clock line GPIO
- sda-gpios : serial control data line GPIO
Required nodes:
- Video port for DPI input, see panel-dpi.txt
- Panel timing for DPI setup, see panel-dpi.txt
Example
-------
panel {
compatible = "tpo,tpg110", "panel-dpi";
grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
backlight = <&bl>;
port {
nomadik_clcd_panel: endpoint {
remote-endpoint = <&nomadik_clcd_pads>;
};
};
panel-timing {
clock-frequency = <33200000>;
hactive = <800>;
hback-porch = <216>;
hfront-porch = <40>;
hsync-len = <1>;
vactive = <480>;
vback-porch = <35>;
vfront-porch = <10>;
vsync-len = <1>;
};
};

24
Documentation/devicetree/bindings/net/brcm,amac.txt Normal file
View file

@ -0,0 +1,24 @@
Broadcom AMAC Ethernet Controller Device Tree Bindings
-------------------------------------------------------------
Required properties:
- compatible: "brcm,amac" or "brcm,nsp-amac"
- reg: Address and length of the GMAC registers,
Address and length of the GMAC IDM registers
- reg-names: Names of the registers. Must have both "amac_base" and
"idm_base"
- interrupts: Interrupt number
Optional properties:
- mac-address: See ethernet.txt file in the same directory
Examples:
amac0: ethernet@18022000 {
compatible = "brcm,nsp-amac";
reg = <0x18022000 0x1000>,
<0x18110000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};

24
Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt Normal file
View file

@ -0,0 +1,24 @@
Broadcom GMAC Ethernet Controller Device Tree Bindings
-------------------------------------------------------------
Required properties:
- compatible: "brcm,bgmac-nsp"
- reg: Address and length of the GMAC registers,
Address and length of the GMAC IDM registers
- reg-names: Names of the registers. Must have both "gmac_base" and
"idm_base"
- interrupts: Interrupt number
Optional properties:
- mac-address: See ethernet.txt file in the same directory
Examples:
gmac0: ethernet@18022000 {
compatible = "brcm,bgmac-nsp";
reg = <0x18022000 0x1000>,
<0x18110000 0x1000>;
reg-names = "gmac_base", "idm_base";
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};

44
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
View file

@ -229,6 +229,8 @@ Example: A pin-controller node with pin banks:
Example 1: A pin-controller node with pin groups.
#include <dt-bindings/pinctrl/samsung.h>
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
@ -238,53 +240,53 @@ Example 1: A pin-controller node with pin groups.
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd4_bus8: sd4-bus-width8 {
part-1 {
samsung,pins = "gpk0-3", "gpk0-4",
"gpk0-5", "gpk0-6";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
part-2 {
samsung,pins = "gpk1-3", "gpk1-4",
"gpk1-5", "gpk1-6";
samsung,pin-function = <4>;
samsung,pin-pud = <4>;
samsung,pin-drv = <3>;
samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
};

3
Documentation/devicetree/bindings/vendor-prefixes.txt
View file

@ -101,6 +101,7 @@ ezchip EZchip Semiconductor
fcs Fairchild Semiconductor
firefly Firefly
focaltech FocalTech Systems Co.,Ltd
friendlyarm Guangzhou FriendlyARM Computer Tech Co., Ltd
fsl Freescale Semiconductor
ge General Electric Company
geekbuying GeekBuying
@ -137,6 +138,7 @@ innolux Innolux Corporation
intel Intel Corporation
intercontrol Inter Control Group
invensense InvenSense Inc.
inversepath Inverse Path
iom Iomega Corporation
isee ISEE 2007 S.L.
isil Intersil
@ -280,6 +282,7 @@ toshiba Toshiba Corporation
toumaz Toumaz
tpk TPK U.S.A. LLC
tplink TP-LINK Technologies Co., Ltd.
tpo TPO
tronfy Tronfy
tronsmart Tronsmart
truly Truly Semiconductors Limited

2
MAINTAINERS
View file

@ -9453,6 +9453,8 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/pinctrl/samsung/
F: include/dt-bindings/pinctrl/samsung.h
F: Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
PIN CONTROLLER - SINGLE
M: Tony Lindgren <tony@atomide.com>

58
arch/arm/boot/dts/Makefile
View file

@ -69,7 +69,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b-rev2.dtb \
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-a-plus.dtb \
bcm2836-rpi-2-b.dtb
bcm2836-rpi-2-b.dtb \
bcm2835-rpi-zero.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
@ -102,8 +103,13 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm21664-garnet.dtb \
bcm23550-sparrow.dtb
dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958522er.dtb \
bcm958525er.dtb \
bcm958525xmc.dtb \
bcm958622hr.dtb \
bcm958623hr.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
@ -114,6 +120,7 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-lcdk.dtb \
da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_DIGICOLOR) += \
@ -315,6 +322,7 @@ dtb-$(CONFIG_SOC_IMX53) += \
imx53-smd.dtb \
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
imx53-usbarmory.dtb \
imx53-voipac-bsb.dtb
dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-apf6dev.dtb \
@ -330,6 +338,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-gw54xx.dtb \
imx6dl-gw551x.dtb \
imx6dl-gw552x.dtb \
imx6dl-gw553x.dtb \
imx6dl-hummingboard.dtb \
imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
@ -339,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
imx6dl-ts4900.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
imx6dl-tx6s-8035.dtb \
@ -368,6 +378,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-gw54xx.dtb \
imx6q-gw551x.dtb \
imx6q-gw552x.dtb \
imx6q-gw553x.dtb \
imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-icore-rqs.dtb \
@ -382,6 +393,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
imx6q-ts4900.dtb \
imx6q-tx6q-1010.dtb \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
@ -407,6 +419,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sdb.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
imx6ul-geam-kit.dtb \
imx6ul-pico-hobbit.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
@ -417,7 +430,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
imx7d-sdb.dtb \
imx7s-colibri-eval-v3.dtb
imx7s-colibri-eval-v3.dtb \
imx7s-warp.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
ls1021a-twr.dtb
@ -570,6 +584,7 @@ dtb-$(CONFIG_SOC_OMAP5) += \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += \
am57xx-beagle-x15.dtb \
am57xx-beagle-x15-revb1.dtb \
am57xx-cl-som-am57x.dtb \
am57xx-sbc-am57x.dtb \
am572x-idk.dtb \
@ -584,6 +599,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-linkstation-lswtgl.dtb \
orion5x-lswsgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-netgear-wnr854t.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
@ -603,14 +619,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
qcom-msm8974-sony-xperia-honami.dtb
dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-pb1176.dtb \
arm-realview-pb11mp.dtb \
arm-realview-eb.dtb \
arm-realview-eb-bbrevd.dtb \
arm-realview-eb-11mp.dtb \
arm-realview-eb-11mp-revb.dtb \
arm-realview-eb-11mp-bbrevd.dtb \
arm-realview-eb-11mp-ctrevb.dtb \
arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
arm-realview-eb-a9mp.dtb \
arm-realview-eb-a9mp-bbrevd.dtb \
arm-realview-pba8.dtb \
arm-realview-pbx-a9.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
@ -624,8 +645,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3229-evb.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
rk3288-fennec.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
rk3288-firefly-reload.dtb \
rk3288-miqi.dtb \
rk3288-popmetal.dtb \
rk3288-r89.dtb \
@ -651,6 +674,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r7s72100-rskrza1.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
@ -659,6 +683,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
r8a7792-blanche.dtb \
r8a7792-wheat.dtb \
r8a7793-gose.dtb \
r8a7794-alt.dtb \
r8a7794-silk.dtb \
@ -686,6 +711,7 @@ dtb-$(CONFIG_ARCH_SPEAR6XX) += \
dtb-$(CONFIG_ARCH_STI) += \
stih407-b2120.dtb \
stih410-b2120.dtb \
stih410-b2260.dtb \
stih415-b2000.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
@ -727,6 +753,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-wobo-i5.dtb \
sun5i-a13-difrnce-dit4350.dtb \
sun5i-a13-empire-electronix-d709.dtb \
sun5i-a13-empire-electronix-m712.dtb \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-98v-rev2.dtb \
sun5i-a13-olinuxino.dtb \
@ -743,6 +770,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-mele-a1000g-quad.dtb \
sun6i-a31s-colorfly-e708-q1.dtb \
sun6i-a31s-cs908.dtb \
sun6i-a31s-inet-q972.dtb \
sun6i-a31s-primo81.dtb \
sun6i-a31s-sina31s.dtb \
sun6i-a31s-sinovoip-bpi-m2.dtb \
@ -782,16 +810,22 @@ dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-q8-tablet.dtb \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-inet-d978-rev2.dtb \
sun8i-a33-ippo-q8h-v1.2.dtb \
sun8i-a33-olinuxino.dtb \
sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
sun8i-a83t-cubietruck-plus.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
sun8i-h3-orangepi-pc.dtb \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-r16-parrot.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
@ -836,15 +870,15 @@ dtb-$(CONFIG_ARCH_U8500) += \
ste-ccu8540.dtb \
ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
uniphier-ph1-ld4-ref.dtb \
uniphier-ph1-ld6b-ref.dtb \
uniphier-ph1-pro4-ace.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-pro4-sanji.dtb \
uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-sld8-ref.dtb \
uniphier-proxstream2-gentil.dtb \
uniphier-proxstream2-vodka.dtb
uniphier-ld4-ref.dtb \
uniphier-ld6b-ref.dtb \
uniphier-pro4-ace.dtb \
uniphier-pro4-ref.dtb \
uniphier-pro4-sanji.dtb \
uniphier-pxs2-gentil.dtb \
uniphier-pxs2-vodka.dtb \
uniphier-sld3-ref.dtb \
uniphier-sld8-ref.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += \
versatile-ab.dtb \
versatile-pb.dtb

6
arch/arm/boot/dts/am335x-baltos.dtsi
View file

@ -24,12 +24,12 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
@ -37,7 +37,7 @@ vbat: fixedregulator@0 {
regulator-boot-on;
};
wl12xx_vmmc: fixedregulator@2 {
wl12xx_vmmc: fixedregulator2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";

4
arch/arm/boot/dts/am335x-base0033.dts
View file

@ -29,13 +29,13 @@ leds_base {
compatible = "gpio-leds";
led@0 {
led0 {
label = "base:red:user";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */
default-state = "off";
};
led@1 {
led1 {
label = "base:green:user";
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */
default-state = "off";

12
arch/arm/boot/dts/am335x-bone-common.dtsi
View file

@ -13,7 +13,7 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
@ -28,28 +28,28 @@ leds {
compatible = "gpio-leds";
led@2 {
led2 {
label = "beaglebone:green:heartbeat";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@3 {
led3 {
label = "beaglebone:green:mmc0";
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
led4 {
label = "beaglebone:green:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
default-state = "off";
};
led@5 {
led5 {
label = "beaglebone:green:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
@ -57,7 +57,7 @@ led@5 {
};
};
vmmcsd_fixed: fixedregulator@0 {
vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;

11
arch/arm/boot/dts/am335x-boneblack.dts
View file

@ -33,17 +33,6 @@ &mmc2 {
status = "okay";
};
&cpu0_opp_table {
/*
* All PG 2.0 silicon may not support 1GHz but some of the early
* BeagleBone Blacks have PG 2.0 silicon which is guaranteed
* to support 1GHz OPP so enable it for PG 2.0 on this board.
*/
oppnitro@1000000000 {
opp-supported-hw = <0x06 0x0100>;
};
};
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
pinctrl-single,pins = <

2
arch/arm/boot/dts/am335x-chilisom.dtsi
View file

@ -19,7 +19,7 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};

8
arch/arm/boot/dts/am335x-cm-t335.dts
View file

@ -17,7 +17,7 @@ / {
model = "CompuLab CM-T335";
compatible = "compulab,cm-t335", "ti,am33xx";
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x8000000>; /* 128 MB */
};
@ -26,7 +26,7 @@ leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&gpio_led_pins>;
led@0 {
led0 {
label = "cm_t335:green";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
linux,default-trigger = "heartbeat";
@ -34,7 +34,7 @@ led@0 {
};
/* regulator for mmc */
vmmc_fixed: fixedregulator@0 {
vmmc_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmc_fixed";
regulator-min-microvolt = <3300000>;
@ -42,7 +42,7 @@ vmmc_fixed: fixedregulator@0 {
};
/* Regulator for WiFi */
vwlan_fixed: fixedregulator@2 {
vwlan_fixed: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "vwlan_fixed";
gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */

18
arch/arm/boot/dts/am335x-evm.dts
View file

@ -20,12 +20,12 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
@ -33,13 +33,13 @@ vbat: fixedregulator@0 {
regulator-boot-on;
};
lis3_reg: fixedregulator@1 {
lis3_reg: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "lis3_reg";
regulator-boot-on;
};
wlan_en_reg: fixedregulator@2 {
wlan_en_reg: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
regulator-min-microvolt = <1800000>;
@ -53,7 +53,7 @@ wlan_en_reg: fixedregulator@2 {
enable-active-high;
};
matrix_keypad: matrix_keypad@0 {
matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
@ -73,20 +73,20 @@ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */
0x0201006c>; /* DOWN */
};
gpio_keys: volume_keys@0 {
gpio_keys: volume_keys0 {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
autorepeat;
switch@9 {
switch9 {
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
wakeup-source;
};
switch@10 {
switch10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
@ -497,6 +497,8 @@ tlv320aic3106: tlv320aic3106@1b {
&lcdc {
status = "okay";
blue-and-red-wiring = "crossed";
};
&elm {

70
arch/arm/boot/dts/am335x-evmsk.dts
View file

@ -27,12 +27,12 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
@ -40,13 +40,13 @@ vbat: fixedregulator@0 {
regulator-boot-on;
};
lis3_reg: fixedregulator@1 {
lis3_reg: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "lis3_reg";
regulator-boot-on;
};
wl12xx_vmmc: fixedregulator@2 {
wl12xx_vmmc: fixedregulator2 {
pinctrl-names = "default";
pinctrl-0 = <&wl12xx_gpio>;
compatible = "regulator-fixed";
@ -58,7 +58,7 @@ wl12xx_vmmc: fixedregulator@2 {
enable-active-high;
};
vtt_fixed: fixedregulator@3 {
vtt_fixed: fixedregulator3 {
compatible = "regulator-fixed";
regulator-name = "vtt";
regulator-min-microvolt = <1500000>;
@ -75,26 +75,26 @@ leds {
compatible = "gpio-leds";
led@1 {
led1 {
label = "evmsk:green:usr0";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
led2 {
label = "evmsk:green:usr1";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
led3 {
label = "evmsk:green:mmc0";
gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@4 {
led4 {
label = "evmsk:green:heartbeat";
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@ -102,31 +102,31 @@ led@4 {
};
};
gpio_buttons: gpio_buttons@0 {
gpio_buttons: gpio_buttons0 {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
switch@1 {
switch1 {
label = "button0";
linux,code = <0x100>;
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
};
switch@2 {
switch2 {
label = "button1";
linux,code = <0x101>;
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
switch@3 {
switch3 {
label = "button2";
linux,code = <0x102>;
gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
switch@4 {
switch4 {
label = "button3";
linux,code = <0x103>;
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
@ -170,29 +170,29 @@ panel {
pinctrl-1 = <&lcd_pins_sleep>;
status = "okay";
panel-info {
ac-bias = <255>;
ac-bias-intrpt = <0>;
dma-burst-sz = <16>;
bpp = <32>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
ac-bias = <255>;
ac-bias-intrpt = <0>;
dma-burst-sz = <16>;
bpp = <32>;
fdd = <0x80>;
sync-edge = <0>;
sync-ctrl = <1>;
raster-order = <0>;
fifo-th = <0>;
};
display-timings {
480x272 {
hactive = <480>;
vactive = <272>;
hback-porch = <43>;
hfront-porch = <8>;
hsync-len = <4>;
vback-porch = <12>;
vfront-porch = <4>;
vsync-len = <10>;
hactive = <480>;
vactive = <272>;
hback-porch = <43>;
hfront-porch = <8>;
hsync-len = <4>;
vback-porch = <12>;
vfront-porch = <4>;
vsync-len = <10>;
clock-frequency = <9000000>;
hsync-active = <0>;
vsync-active = <0>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
@ -711,5 +711,7 @@ tsc {
};
&lcdc {
status = "okay";
status = "okay";
blue-and-red-wiring = "crossed";
};

47
arch/arm/boot/dts/am335x-icev2.dts
View file

@ -19,12 +19,12 @@ / {
model = "TI AM3359 ICE-V2";
compatible = "ti,am3359-icev2", "ti,am33xx";
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
@ -32,7 +32,7 @@ vbat: fixedregulator@0 {
regulator-boot-on;
};
vtt_fixed: fixedregulator@1 {
vtt_fixed: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vtt";
regulator-min-microvolt = <1500000>;
@ -43,52 +43,52 @@ vtt_fixed: fixedregulator@1 {
enable-active-high;
};
leds@0 {
leds0 {
compatible = "gpio-leds";
led@0 {
led0 {
label = "out0";
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@1 {
led1 {
label = "out1";
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
led2 {
label = "out2";
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
led3 {
label = "out3";
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@4 {
led4 {
label = "out4";
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
led5 {
label = "out5";
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@6 {
led6 {
label = "out6";
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@7 {
led7 {
label = "out7";
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
@ -96,49 +96,58 @@ led@7 {
};
/* Tricolor status LEDs */
leds@1 {
leds1 {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&user_leds>;
led@0 {
led0 {
label = "status0:red:cpu0";
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu0";
};
led@1 {
led1 {
label = "status0:green:usr";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
led2 {
label = "status0:yellow:usr";
gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@3 {
led3 {
label = "status1:red:mmc0";
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
led@4 {
led4 {
label = "status1:green:usr";
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
led5 {
label = "status1:yellow:usr";
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio-decoder {
compatible = "gpio-decoder";
gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
<&pca9536 2 GPIO_ACTIVE_HIGH>,
<&pca9536 1 GPIO_ACTIVE_HIGH>,
<&pca9536 0 GPIO_ACTIVE_HIGH>;
linux,axis = <0>; /* ABS_X */
decoder-max-value = <9>;
};
};
&am33xx_pinmux {

8
arch/arm/boot/dts/am335x-igep0033.dtsi
View file

@ -20,7 +20,7 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
@ -31,14 +31,14 @@ leds {
compatible = "gpio-leds";
led@0 {
led0 {
label = "com:green:user";
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
@ -46,7 +46,7 @@ vbat: fixedregulator@0 {
regulator-boot-on;
};
vmmc: fixedregulator@0 {
vmmc: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vmmc";
regulator-min-microvolt = <3300000>;

6
arch/arm/boot/dts/am335x-lxm.dts
View file

@ -19,13 +19,13 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
/* Power supply provides a fixed 5V @2A */
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
@ -34,7 +34,7 @@ vbat: fixedregulator@0 {
};
/* Power supply provides a fixed 3.3V @3A */
vmmcsd_fixed: fixedregulator@1 {
vmmcsd_fixed: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;

4
arch/arm/boot/dts/am335x-nano.dts
View file

@ -19,7 +19,7 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
@ -27,7 +27,7 @@ memory {
leds {
compatible = "gpio-leds";
led@0 {
led0 {
label = "nanobone:green:usr1";
gpios = <&gpio1 5 0>;
default-state = "off";

18
arch/arm/boot/dts/am335x-pepper.dts
View file

@ -20,7 +20,7 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
@ -41,15 +41,15 @@ sound: sound_iface {
compatible = "ti,da830-evm-audio";
};
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
};
v3v3c_reg: fixedregulator@1 {
v3v3c_reg: fixedregulator1 {
compatible = "regulator-fixed";
};
vdd5_reg: fixedregulator@2 {
vdd5_reg: fixedregulator2 {
compatible = "regulator-fixed";
};
};
@ -595,14 +595,14 @@ &leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_pins>;
led@0 {
led0 {
label = "pepper:user0:blue";
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
default-state = "off";
};
led@1 {
led1 {
label = "pepper:user1:red";
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
@ -616,21 +616,21 @@ &buttons {
#address-cells = <1>;
#size-cells = <0>;
button@0 {
button0 {
label = "home";
linux,code = <KEY_HOME>;
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
wakeup-source;
};
button@1 {
button1 {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
wakeup-source;
};
buttons@2 {
buttons2 {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;

4
arch/arm/boot/dts/am335x-phycore-som.dtsi
View file

@ -25,7 +25,7 @@ cpu@0 {
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
@ -33,7 +33,7 @@ memory {
regulators {
compatible = "simple-bus";
vcc5v: fixedregulator@0 {
vcc5v: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v";
regulator-min-microvolt = <5000000>;

16
arch/arm/boot/dts/am335x-shc.dts
View file

@ -64,50 +64,50 @@ leds {
compatible = "gpio-leds";
led@1 {
led1 {
label = "shc:power:red";
gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@2 {
led2 {
label = "shc:power:bl";
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
default-state = "on";
};
led@3 {
led3 {
label = "shc:lan:red";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@4 {
led4 {
label = "shc:lan:bl";
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@5 {
led5 {
label = "shc:cloud:red";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
led@6 {
led6 {
label = "shc:cloud:bl";
gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
vmmcsd_fixed: fixedregulator@0 {
vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;

15
arch/arm/boot/dts/am335x-sl50.dts
View file

@ -19,6 +19,11 @@ cpu@0 {
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
chosen {
stdout-path = &uart0;
};
@ -28,25 +33,25 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
led@0 {
led0 {
label = "sl50:green:usr0";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@1 {
led1 {
label = "sl50:red:usr1";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@2 {
led2 {
label = "sl50:green:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led@3 {
led3 {
label = "sl50:red:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "off";
@ -103,7 +108,7 @@ emmc_pwrseq: pwrseq@0 {
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
};
vmmcsd_fixed: fixedregulator@0 {
vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;

64
arch/arm/boot/dts/am335x-wega.dtsi
View file

@ -11,10 +11,14 @@ / {
model = "Phytec AM335x phyBOARD-WEGA";
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
sound: sound_iface {
compatible = "ti,da830-evm-audio";
};
regulators {
compatible = "simple-bus";
vcc3v3: fixedregulator@1 {
vcc3v3: fixedregulator1 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
@ -24,6 +28,58 @@ vcc3v3: fixedregulator@1 {
};
};
/* Audio */
&am33xx_pinmux {
mcasp0_pins: pinmux_mcasp0 {
pinctrl-single,pins = <
AM33XX_IOPAD(0x9AC, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahclkx.mcasp0_ahclkx */
AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
AM33XX_IOPAD(0x9A8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */
>;
};
};
&i2c0 {
tlv320aic3007: tlv320aic3007@18 {
compatible = "ti,tlv320aic3007";
reg = <0x18>;
AVDD-supply = <&vcc3v3>;
IOVDD-supply = <&vcc3v3>;
DRVDD-supply = <&vcc3v3>;
DVDD-supply = <&vdig1_reg>;
status = "okay";
};
};
&mcasp0 {
pinctrl-names = "default";
pinctrl-0 = <&mcasp0_pins>;
op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
tdm-slots = <2>;
serial-dir = <
2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
>;
tx-num-evt = <16>;
rt-num-evt = <16>;
status = "okay";
};
&sound {
ti,model = "AM335x-Wega";
ti,audio-codec = <&tlv320aic3007>;
ti,mcasp-controller = <&mcasp0>;
ti,audio-routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"LINE1L", "Line In",
"LINE1R", "Line In";
clocks = <&mcasp0_fck>;
clock-names = "mclk";
status = "okay";
};
/* CAN Busses */
&am33xx_pinmux {
dcan1_pins: pinmux_dcan1 {
@ -99,6 +155,12 @@ &mmc1 {
status = "okay";
};
/* Power */
&vdig1_reg {
regulator-boot-on;
regulator-always-on;
};
/* UARTs */
&am33xx_pinmux {
uart0_pins: pinmux_uart0 {

92
arch/arm/boot/dts/am33xx.dtsi
View file

@ -11,11 +11,11 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/am33xx.h>
#include "skeleton.dtsi"
/ {
compatible = "ti,am33xx";
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
aliases {
i2c0 = &i2c0;
@ -45,9 +45,19 @@ cpu@0 {
device_type = "cpu";
reg = <0>;
operating-points-v2 = <&cpu0_opp_table>;
ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
ti,syscon-rev = <&scm_conf 0x600>;
/*
* To consider voltage drop between PMIC and SoC,
* tolerance value is reduced to 2% from 4% and
* voltage value is increased as a precaution.
*/
operating-points = <
/* kHz uV */
720000 1285000
600000 1225000
500000 1125000
275000 1125000
>;
voltage-tolerance = <2>; /* 2 percentage */
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
@ -56,78 +66,6 @@ cpu@0 {
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
/*
* The three following nodes are marked with opp-suspend
* because the can not be enabled simultaneously on a
* single SoC.
*/
opp50@300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <950000 931000 969000>;
opp-supported-hw = <0x06 0x0010>;
opp-suspend;
};
opp100@275000000 {
opp-hz = /bits/ 64 <275000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x01 0x00FF>;
opp-suspend;
};
opp100@300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x06 0x0020>;
opp-suspend;
};
opp100@500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x01 0xFFFF>;
};
opp100@600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1100000 1078000 1122000>;
opp-supported-hw = <0x06 0x0040>;
};
opp120@600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1200000 1176000 1224000>;
opp-supported-hw = <0x01 0xFFFF>;
};
opp120@720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1200000 1176000 1224000>;
opp-supported-hw = <0x06 0x0080>;
};
oppturbo@720000000 {
opp-hz = /bits/ 64 <720000000>;
opp-microvolt = <1260000 1234800 1285200>;
opp-supported-hw = <0x01 0xFFFF>;
};
oppturbo@800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1260000 1234800 1285200>;
opp-supported-hw = <0x06 0x0100>;
};
oppnitro@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1325000 1298500 1351500>;
opp-supported-hw = <0x04 0x0200>;
};
};
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;

2
arch/arm/boot/dts/am3517-craneboard.dts
View file

@ -15,7 +15,7 @@ / {
model = "TI AM3517 CraneBoard (TMDSEVM3517)";
compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};

2
arch/arm/boot/dts/am3517-evm.dts
View file

@ -13,7 +13,7 @@ / {
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};

2
arch/arm/boot/dts/am3517.dtsi
View file

@ -15,7 +15,7 @@ aliases {
serial3 = &uart4;
};
ocp {
ocp@68000000 {
am35x_otg_hs: am35x_otg_hs@5c040000 {
compatible = "ti,omap3-musb";
ti,hwmods = "am35x_otg_hs";

2
arch/arm/boot/dts/am3517_mt_ventoux.dts
View file

@ -13,7 +13,7 @@ / {
model = "TeeJet Mt.Ventoux";
compatible = "teejet,mt_ventoux", "ti,omap3";
memory {
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};

10
arch/arm/boot/dts/am4372.dtsi
View file

@ -11,12 +11,16 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
/ {
compatible = "ti,am4372", "ti,am43";
interrupt-parent = <&wakeupgen>;
#address-cells = <1>;
#size-cells = <1>;
memory@0 {
device_type = "memory";
reg = <0 0>;
};
aliases {
i2c0 = &i2c0;
@ -132,7 +136,7 @@ l2-cache-controller@48242000 {
cache-level = <2>;
};
ocp {
ocp@44000000 {
compatible = "ti,am4372-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;

6
arch/arm/boot/dts/am437x-cm-t43.dts
View file

@ -209,7 +209,6 @@ tps65218: tps65218@24 {
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
compatible = "ti,tps65218-dcdc1";
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
@ -218,7 +217,6 @@ dcdc1: regulator-dcdc1 {
};
dcdc2: regulator-dcdc2 {
compatible = "ti,tps65218-dcdc2";
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
@ -227,7 +225,6 @@ dcdc2: regulator-dcdc2 {
};
dcdc3: regulator-dcdc3 {
compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
regulator-suspend-enable;
regulator-min-microvolt = <1500000>;
@ -237,7 +234,6 @@ dcdc3: regulator-dcdc3 {
};
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@ -246,7 +242,6 @@ dcdc5: regulator-dcdc5 {
};
dcdc6: regulator-dcdc6 {
compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -255,7 +250,6 @@ dcdc6: regulator-dcdc6 {
};
ldo1: regulator-ldo1 {
compatible = "ti,tps65218-ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;

21
arch/arm/boot/dts/am437x-gp-evm.dts
View file

@ -58,7 +58,7 @@ backlight {
default-brightness-level = <8>;
};
matrix_keypad: matrix_keypad@0 {
matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
@ -513,7 +513,6 @@ tps65218: tps65218@24 {
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
compatible = "ti,tps65218-dcdc1";
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
@ -522,7 +521,6 @@ dcdc1: regulator-dcdc1 {
};
dcdc2: regulator-dcdc2 {
compatible = "ti,tps65218-dcdc2";
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
@ -531,33 +529,42 @@ dcdc2: regulator-dcdc2 {
};
dcdc3: regulator-dcdc3 {
compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
regulator-state-disk {
regulator-off-in-suspend;
};
};
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
dcdc6: regulator-dcdc6 {
compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
ldo1: regulator-ldo1 {
compatible = "ti,tps65218-ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;

2
arch/arm/boot/dts/am437x-idk-evm.dts
View file

@ -104,7 +104,7 @@ gpio_keys: gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
switch@0 {
switch0 {
label = "power-button";
linux,code = <KEY_POWER>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;

45
arch/arm/boot/dts/am437x-sk-evm.dts
View file

@ -64,7 +64,7 @@ sound_master: simple-audio-card,codec {
};
};
matrix_keypad: matrix_keypad@0 {
matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
pinctrl-names = "default";
@ -93,28 +93,28 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&leds_pins>;
led@0 {
led0 {
label = "am437x-sk:red:heartbeat";
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@1 {
led1 {
label = "am437x-sk:green:mmc1";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */
linux,default-trigger = "mmc0";
default-state = "off";
};
led@2 {
led2 {
label = "am437x-sk:blue:cpu0";
gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */
linux,default-trigger = "cpu0";
default-state = "off";
};
led@3 {
led3 {
label = "am437x-sk:blue:usr3";
gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */
default-state = "off";
@ -428,7 +428,6 @@ tps@24 {
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
compatible = "ti,tps65218-dcdc1";
/* VDD_CORE limits min of OPP50 and max of OPP100 */
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
@ -438,7 +437,6 @@ dcdc1: regulator-dcdc1 {
};
dcdc2: regulator-dcdc2 {
compatible = "ti,tps65218-dcdc2";
/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
@ -448,16 +446,20 @@ dcdc2: regulator-dcdc2 {
};
dcdc3: regulator-dcdc3 {
compatible = "ti,tps65218-dcdc3";
regulator-name = "vdds_ddr";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
regulator-state-disk {
regulator-off-in-suspend;
};
};
dcdc4: regulator-dcdc4 {
compatible = "ti,tps65218-dcdc4";
regulator-name = "v3_3d";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -465,8 +467,31 @@ dcdc4: regulator-dcdc4 {
regulator-always-on;
};
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
dcdc6: regulator-dcdc6 {
compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
ldo1: regulator-ldo1 {
compatible = "ti,tps65218-ldo1";
regulator-name = "v1_8d";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;

11
arch/arm/boot/dts/am43x-epos-evm.dts
View file

@ -32,7 +32,7 @@ vmmcsd_fixed: fixedregulator-sd {
enable-active-high;
};
vbat: fixedregulator@0 {
vbat: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
@ -67,7 +67,7 @@ lcd_in: endpoint {
};
};
matrix_keypad: matrix_keypad@0 {
matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
@ -421,7 +421,6 @@ tps65218: tps65218@24 {
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
compatible = "ti,tps65218-dcdc1";
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
@ -430,7 +429,6 @@ dcdc1: regulator-dcdc1 {
};
dcdc2: regulator-dcdc2 {
compatible = "ti,tps65218-dcdc2";
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
@ -439,7 +437,6 @@ dcdc2: regulator-dcdc2 {
};
dcdc3: regulator-dcdc3 {
compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
@ -448,7 +445,6 @@ dcdc3: regulator-dcdc3 {
};
dcdc4: regulator-dcdc4 {
compatible = "ti,tps65218-dcdc4";
regulator-name = "vdcdc4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -457,21 +453,18 @@ dcdc4: regulator-dcdc4 {
};
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
dcdc6: regulator-dcdc6 {
compatible = "ti,tps65218-dcdc6";
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo1: regulator-ldo1 {
compatible = "ti,tps65218-ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;

2
arch/arm/boot/dts/am572x-idk.dts
View file

@ -18,7 +18,7 @@ / {
compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
"ti,dra7";
memory {
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};

596
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi Normal file
View file

@ -0,0 +1,596 @@
/*
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
rtc2 = &rtc;
display0 = &hdmi0;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
vin-supply = <&regen1>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
aic_dvdd: fixedregulator-aic_dvdd {
compatible = "regulator-fixed";
regulator-name = "aic_dvdd_fixed";
vin-supply = <&vdd_3v3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
vin-supply = <&smps3_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
led0 {
label = "beagle-x15:usr0";
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led1 {
label = "beagle-x15:usr1";
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
default-state = "off";
};
led2 {
label = "beagle-x15:usr2";
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led3 {
label = "beagle-x15:usr3";
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
default-state = "off";
};
};
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
tpd12s015: encoder {
compatible = "ti,tpd12s015";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "BeagleBoard-X15";
simple-audio-card,widgets =
"Line", "Line Out",
"Line", "Line In";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"MIC2L", "Line In",
"MIC2R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp3>;
};
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3104>;
clocks = <&clkout2_clk>;
};
};
};
&dra7_pmx_core {
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
regulator-name = "smps12";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps3_reg: smps3 {
/* VDD_DDR */
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
smps45_reg: smps45 {
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps6_reg: smps6 {
/* VDD_CORE */
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
/* SMPS7 unused */
smps8_reg: smps8 {
/* VDD_1V8 */
regulator-name = "smps8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
/* SMPS9 unused */
ldo1_reg: ldo1 {
/* VDD_SD / VDDSHV8 */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ldo2 {
/* VDD_SHV5 */
regulator-name = "ldo2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo3_reg: ldo3 {
/* VDDA_1V8_PHYA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* VDDA_1V8_PHYB */
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo9_reg: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
};
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
regen1: regen1 {
/* VDD_3V3_ON */
regulator-name = "regen1";
regulator-boot-on;
regulator-always-on;
};
};
};
tps659038_rtc: tps659038_rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&tps659038>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
tps659038_pwr_button: tps659038_pwr_button {
compatible = "ti,palmas-pwrbutton";
interrupt-parent = <&tps659038>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
ti,palmas-long-press-seconds = <12>;
};
tps659038_gpio: tps659038_gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
extcon_usb2: tps659038_usb {
compatible = "ti,palmas-usb-vid";
ti,enable-vbus-detection;
vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
};
};
tmp102: tmp102@48 {
compatible = "ti,tmp102";
reg = <0x48>;
interrupt-parent = <&gpio7>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
tlv320aic3104: tlv320aic3104@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3104";
reg = <0x18>;
assigned-clocks = <&clkoutmux2_clk_mux>;
assigned-clock-parents = <&sys_clk2_dclk_div>;
status = "okay";
adc-settle-ms = <40>;
AVDD-supply = <&vdd_3v3>;
IOVDD-supply = <&vdd_3v3>;
DRVDD-supply = <&vdd_3v3>;
DVDD-supply = <&aic_dvdd>;
};
eeprom: eeprom@50 {
compatible = "at,24c32";
reg = <0x50>;
};
};
&i2c3 {
status = "okay";
clock-frequency = <400000>;
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
<&dra7_pmx_core 0x424>;
interrupt-names = "irq", "wakeup";
vcc-supply = <&vdd_3v3>;
wakeup-source;
};
};
&gpio7 {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
&cpu0 {
cpu0-supply = <&smps12_reg>;
voltage-tolerance = <1>;
};
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3f8>;
};
&mac {
status = "okay";
dual_emac;
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <2>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
&mmc1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
};
&mmc2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&vdd_3v3>;
bus-width = <8>;
ti,non-removable;
cap-mmc-dual-data-rate;
};
&sata {
status = "okay";
};
&usb2_phy1 {
phy-supply = <&ldousb_reg>;
};
&usb2_phy2 {
phy-supply = <&ldousb_reg>;
};
&usb1 {
dr_mode = "host";
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb2 {
/*
* Stand alone usage is peripheral only.
* However, with some resistor modifications
* this port can be used via expansion connectors
* as "host" or "dual-role". If so, provide
* the necessary dr_mode override in the expansion
* board's DT.
*/
dr_mode = "peripheral";
};
&cpu_trips {
cpu_alert1: cpu_alert1 {
temperature = <50000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "active";
};
};
&cpu_cooling_maps {
map1 {
trip = <&cpu_alert1>;
cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
&thermal_zones {
board_thermal: board_thermal {
polling-delay-passive = <1250>; /* milliseconds */
polling-delay = <1500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&tmp102 0>;
board_trips: trips {
board_alert0: board_alert {
temperature = <40000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "active";
};
board_crit: board_crit {
temperature = <105000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
board_cooling_maps: cooling-maps {
map0 {
trip = <&board_alert0>;
cooling-device =
<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
&dss {
status = "ok";
vdda_video-supply = <&ldoln_reg>;
};
&hdmi {
status = "ok";
vdda-supply = <&ldo4_reg>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
&pcie1 {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&sys_clkin2>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
status = "okay";
};
};

24
arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts Normal file
View file

@ -0,0 +1,24 @@
/*
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "am57xx-beagle-x15-common.dtsi"
/ {
model = "TI AM5728 BeagleBoard-X15 rev B1";
};
&tpd12s015 {
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
<&gpio2 30 GPIO_ACTIVE_HIGH>, /* gpio2_30, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
};
&mmc1 {
vmmc-supply = <&vdd_3v3>;
vmmc-aux-supply = <&ldo1_reg>;
};

812
arch/arm/boot/dts/am57xx-beagle-x15.dts
View file

@ -1,822 +1,24 @@
/*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
* Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "am57xx-beagle-x15-common.dtsi"
/ {
/* NOTE: This describes the "original" pre-production A2 revision */
model = "TI AM5728 BeagleBoard-X15";
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
rtc2 = &rtc;
display0 = &hdmi0;
};
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>;
};
vdd_3v3: fixedregulator-vdd_3v3 {
compatible = "regulator-fixed";
regulator-name = "vdd_3v3";
vin-supply = <&regen1>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
aic_dvdd: fixedregulator-aic_dvdd {
compatible = "regulator-fixed";
regulator-name = "aic_dvdd_fixed";
vin-supply = <&vdd_3v3>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
vin-supply = <&smps3_reg>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&leds_pins_default>;
led@0 {
label = "beagle-x15:usr0";
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@1 {
label = "beagle-x15:usr1";
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "cpu0";
default-state = "off";
};
led@2 {
label = "beagle-x15:usr2";
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};
led@3 {
label = "beagle-x15:usr3";
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
default-state = "off";
};
};
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
};
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&tpd12s015_out>;
};
};
};
tpd12s015: encoder {
compatible = "ti,tpd12s015";
pinctrl-names = "default";
pinctrl-0 = <&tpd12s015_pins>;
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
<&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "BeagleBoard-X15";
simple-audio-card,widgets =
"Line", "Line Out",
"Line", "Line In";
simple-audio-card,routing =
"Line Out", "LLOUT",
"Line Out", "RLOUT",
"MIC2L", "Line In",
"MIC2R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp3>;
};
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3104>;
clocks = <&clkout2_clk>;
};
};
};
&dra7_pmx_core {
leds_pins_default: leds_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
>;
};
i2c1_pins_default: i2c1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
>;
};
hdmi_pins: pinmux_hdmi_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
>;
};
i2c3_pins_default: i2c3_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
>;
};
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
mmc1_pins_default: mmc1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
>;
};
mmc2_pins_default: mmc2_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
>;
};
cpsw_pins_default: cpsw_pins_default {
pinctrl-single,pins = <
/* Slave 1 */
DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
>;
};
cpsw_pins_sleep: cpsw_pins_sleep {
pinctrl-single,pins = <
/* Slave 1 */
DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
/* Slave 2 */
DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
>;
};
davinci_mdio_pins_default: davinci_mdio_pins_default {
pinctrl-single,pins = <
/* MDIO */
DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
>;
};
davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
>;
};
tps659038_pins_default: tps659038_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
>;
};
tmp102_pins_default: tmp102_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
>;
};
mcp79410_pins_default: mcp79410_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
>;
};
usb1_pins: pinmux_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
>;
};
clkout2_pins_default: clkout2_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
>;
};
clkout2_pins_sleep: clkout2_pins_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
>;
};
mcasp3_pins_default: mcasp3_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
>;
};
mcasp3_pins_sleep: mcasp3_pins_sleep {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
>;
};
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_default>;
clock-frequency = <400000>;
tps659038: tps659038@58 {
compatible = "ti,tps659038";
reg = <0x58>;
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&tps659038_pins_default>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
tps659038_pmic {
compatible = "ti,tps659038-pmic";
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
regulator-name = "smps12";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps3_reg: smps3 {
/* VDD_DDR */
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
smps45_reg: smps45 {
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
smps6_reg: smps6 {
/* VDD_CORE */
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
};
/* SMPS7 unused */
smps8_reg: smps8 {
/* VDD_1V8 */
regulator-name = "smps8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
/* SMPS9 unused */
ldo1_reg: ldo1 {
/* VDD_SD / VDDSHV8 */
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: ldo2 {
/* VDD_SHV5 */
regulator-name = "ldo2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldo3_reg: ldo3 {
/* VDDA_1V8_PHYA */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4_reg: ldo4 {
/* VDDA_1V8_PHYB */
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo9_reg: ldo9 {
/* VDD_RTC */
regulator-name = "ldo9";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
};
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
regen1: regen1 {
/* VDD_3V3_ON */
regulator-name = "regen1";
regulator-boot-on;
regulator-always-on;
};
};
};
tps659038_rtc: tps659038_rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&tps659038>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
};
tps659038_pwr_button: tps659038_pwr_button {
compatible = "ti,palmas-pwrbutton";
interrupt-parent = <&tps659038>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
wakeup-source;
ti,palmas-long-press-seconds = <12>;
};
tps659038_gpio: tps659038_gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
extcon_usb2: tps659038_usb {
compatible = "ti,palmas-usb-vid";
ti,enable-vbus-detection;
vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
};
};
tmp102: tmp102@48 {
compatible = "ti,tmp102";
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&tmp102_pins_default>;
interrupt-parent = <&gpio7>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
tlv320aic3104: tlv320aic3104@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3104";
reg = <0x18>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&clkout2_pins_default>;
pinctrl-1 = <&clkout2_pins_sleep>;
assigned-clocks = <&clkoutmux2_clk_mux>;
assigned-clock-parents = <&sys_clk2_dclk_div>;
status = "okay";
adc-settle-ms = <40>;
AVDD-supply = <&vdd_3v3>;
IOVDD-supply = <&vdd_3v3>;
DRVDD-supply = <&vdd_3v3>;
DVDD-supply = <&aic_dvdd>;
};
eeprom: eeprom@50 {
compatible = "at,24c32";
reg = <0x50>;
};
};
&i2c3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins_default>;
clock-frequency = <400000>;
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
<&dra7_pmx_core 0x424>;
interrupt-names = "irq", "wakeup";
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
vcc-supply = <&vdd_3v3>;
wakeup-source;
};
};
&gpio7 {
ti,no-reset-on-init;
ti,no-idle-on-init;
};
&cpu0 {
cpu0-supply = <&smps12_reg>;
voltage-tolerance = <1>;
};
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<&dra7_pmx_core 0x3f8>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_default>;
};
&mac {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_pins_default>;
pinctrl-1 = <&cpsw_pins_sleep>;
dual_emac;
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <2>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_pins_default>;
pinctrl-1 = <&davinci_mdio_pins_sleep>;
&tpd12s015 {
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
<&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
};
&mmc1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&ldo1_reg>;
bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
};
&mmc2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&vdd_3v3>;
bus-width = <8>;
ti,non-removable;
cap-mmc-dual-data-rate;
};
&sata {
status = "okay";
};
&usb2_phy1 {
phy-supply = <&ldousb_reg>;
};
&usb2_phy2 {
phy-supply = <&ldousb_reg>;
};
&usb1 {
dr_mode = "host";
pinctrl-names = "default";
pinctrl-0 = <&usb1_pins>;
};
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
&usb2 {
/*
* Stand alone usage is peripheral only.
* However, with some resistor modifications
* this port can be used via expansion connectors
* as "host" or "dual-role". If so, provide
* the necessary dr_mode override in the expansion
* board's DT.
*/
dr_mode = "peripheral";
};
&cpu_trips {
cpu_alert1: cpu_alert1 {
temperature = <50000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "active";
};
};
&cpu_cooling_maps {
map1 {
trip = <&cpu_alert1>;
cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
&thermal_zones {
board_thermal: board_thermal {
polling-delay-passive = <1250>; /* milliseconds */
polling-delay = <1500>; /* milliseconds */
/* sensor ID */
thermal-sensors = <&tmp102 0>;
board_trips: trips {
board_alert0: board_alert {
temperature = <40000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
type = "active";
};
board_crit: board_crit {
temperature = <105000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
};
board_cooling_maps: cooling-maps {
map0 {
trip = <&board_alert0>;
cooling-device =
<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
&dss {
status = "ok";
vdda_video-supply = <&ldoln_reg>;
};
&hdmi {
status = "ok";
vdda-supply = <&ldo4_reg>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_pins>;
port {
hdmi_out: endpoint {
remote-endpoint = <&tpd12s015_in>;
};
};
};
&pcie1 {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
&mcasp3 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins_default>;
pinctrl-1 = <&mcasp3_pins_sleep>;
assigned-clocks = <&mcasp3_ahclkx_mux>;
assigned-clock-parents = <&sys_clkin2>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
status = "okay";
};
};

4
arch/arm/boot/dts/am57xx-cl-som-am57x.dts
View file

@ -19,7 +19,7 @@ / {
model = "CompuLab CL-SOM-AM57x";
compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
memory {
memory@0 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
};
@ -29,7 +29,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&leds_pins_default>;
led@0 {
led0 {
label = "cl-som-am57x:green";
gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";

49
arch/arm/boot/dts/am57xx-idk-common.dtsi
View file

@ -304,3 +304,52 @@ &mmc2 {
ti,non-removable;
max-frequency = <96000000>;
};
&qspi {
status = "okay";
spi-max-frequency = <76800000>;
m25p80@0 {
compatible = "s25fl256s1", "jedec,spi-nor";
spi-max-frequency = <76800000>;
reg = <0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
/* MTD partition table.
* The ROM checks the first four physical blocks
* for a valid file to boot and the flash here is
* 64KiB block size.
*/
partition@0 {
label = "QSPI.SPL";
reg = <0x00000000 0x000040000>;
};
partition@1 {
label = "QSPI.u-boot";
reg = <0x00040000 0x00100000>;
};
partition@2 {
label = "QSPI.u-boot-spl-os";
reg = <0x00140000 0x00080000>;
};
partition@3 {
label = "QSPI.u-boot-env";
reg = <0x001c0000 0x00010000>;
};
partition@4 {
label = "QSPI.u-boot-env.backup1";
reg = <0x001d0000 0x0010000>;
};
partition@5 {
label = "QSPI.kernel";
reg = <0x001e0000 0x0800000>;
};
partition@6 {
label = "QSPI.file-system";
reg = <0x009e0000 0x01620000>;
};
};
};

32
arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts Normal file
View file

@ -0,0 +1,32 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "arm-realview-eb-11mp-ctrevb.dts"
#include "arm-realview-eb-bbrevd.dtsi"
/*
* This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
* the Rev B core tile.
*/
/ {
model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
};

28
arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts Normal file
View file

@ -0,0 +1,28 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "arm-realview-eb-11mp.dts"
#include "arm-realview-eb-bbrevd.dtsi"
/ {
model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
};

0
arch/arm/boot/dts/arm-realview-eb-11mp-revb.dts → arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
View file

2
arch/arm/boot/dts/arm-realview-eb-11mp.dts
View file

@ -24,7 +24,7 @@
#include "arm-realview-eb-mp.dtsi"
/ {
model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C";
model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
arm,hbi = <0x146>;
/*

28
arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts Normal file
View file

@ -0,0 +1,28 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "arm-realview-eb-a9mp.dts"
#include "arm-realview-eb-bbrevd.dtsi"
/ {
model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
};

29
arch/arm/boot/dts/arm-realview-eb-bbrevd.dts Normal file
View file

@ -0,0 +1,29 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/* This derives from the Realview Baseboard, and overlays the new ethernet */
#include "arm-realview-eb.dts"
#include "arm-realview-eb-bbrevd.dtsi"
/ {
model = "ARM RealView Emulation Baseboard Rev D";
};

45
arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi Normal file
View file

@ -0,0 +1,45 @@
/*
* Copyright 2016 Linaro Ltd
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
/ {
/* Introduce a fixed regulator for the new ethernet controller */
veth: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
};
/*
* The revision D has a different ethernet controller that the elder boards:
* the older board uses LAN91C111 but the new one uses LAN9118.
*/
&ethernet {
compatible = "smsc,lan9118", "smsc,lan9115";
phy-mode = "mii";
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&veth>;
vddvario-supply = <&veth>;
};

23
arch/arm/boot/dts/arm-realview-eb.dtsi
View file

@ -51,14 +51,6 @@ vmmc: fixedregulator@0 {
regulator-boot-on;
};
veth: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "veth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
xtal24mhz: xtal24mhz@24M {
#clock-cells = <0>;
compatible = "fixed-clock";
@ -134,16 +126,15 @@ flash1@44000000 {
bank-width = <4>;
};
/* SMSC 9118 ethernet with PHY and EEPROM */
/* SMSC LAN91C111 ethernet with PHY and EEPROM */
ethernet: ethernet@4e000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
compatible = "smsc,lan91c111";
reg = <0x4e000000 0x10000>;
phy-mode = "mii";
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&veth>;
vddvario-supply = <&veth>;
/*
* This means the adapter can be accessed with 8, 16 or
* 32 bit reads/writes.
*/
reg-io-width = <7>;
};
usb: usb@4f000000 {

29
arch/arm/boot/dts/armada-370-db.dts
View file

@ -155,20 +155,6 @@ usb@51000 {
status = "okay";
};
spi0: spi@10600 {
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l25635e", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
};
};
nand@d0000 {
status = "okay";
num-cs = <1>;
@ -274,3 +260,18 @@ spdif_in: spdif-in {
compatible = "linux,spdif-dir";
};
};
&spi0 {
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l25635e", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
};
};

40
arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
View file

@ -68,26 +68,6 @@ ethernet@74000 {
phy-mode = "rgmii-id";
};
spi@10600 {
status = "okay";
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
/* MX25L8006E */
compatible = "mxicy,mx25l8005", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
};
};
usb@50000 {
status = "okay";
};
@ -176,3 +156,23 @@ gpio_led_pin: gpio-led-pin {
marvell,function = "gpio";
};
};
&spi0 {
status = "okay";
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
/* MX25L8006E */
compatible = "mxicy,mx25l8005", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
};
};

112
arch/arm/boot/dts/armada-370-synology-ds213j.dts
View file

@ -87,62 +87,6 @@ rtc@10300 {
status = "disabled";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
/*
* Warning!
*
* Synology u-boot uses its compiled-in environment
* and it seems Synology did not care to change u-boot
* default configuration in order to allow saving a
* modified environment at a sensible location. So,
* if you do a 'saveenv' under u-boot, your modified
* environment will be saved at 1MB after the start
* of the flash, i.e. in the middle of the uImage.
* For that reason, it is strongly advised not to
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000c0000>; /* 768KB */
};
partition@000c0000 { /* uImage */
label = "zImage";
reg = <0x000c0000 0x002d0000>; /* 2880KB */
};
partition@00390000 { /* uInitramfs */
label = "rd.gz";
reg = <0x00390000 0x00440000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
};
};
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
pinctrl-0 = <&i2c0_pins>;
@ -347,3 +291,59 @@ fan_alarm_pin: fan-alarm-pin {
marvell,function = "gpio";
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
/*
* Warning!
*
* Synology u-boot uses its compiled-in environment
* and it seems Synology did not care to change u-boot
* default configuration in order to allow saving a
* modified environment at a sensible location. So,
* if you do a 'saveenv' under u-boot, your modified
* environment will be saved at 1MB after the start
* of the flash, i.e. in the middle of the uImage.
* For that reason, it is strongly advised not to
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000c0000>; /* 768KB */
};
partition@000c0000 { /* uImage */
label = "zImage";
reg = <0x000c0000 0x002d0000>; /* 2880KB */
};
partition@00390000 { /* uInitramfs */
label = "rd.gz";
reg = <0x00390000 0x00440000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
};
};

56
arch/arm/boot/dts/armada-370-xp.dtsi
View file

@ -148,26 +148,6 @@ rtc@10300 {
interrupts = <50>;
};
spi0: spi@10600 {
reg = <0x10600 0x28>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <30>;
clocks = <&coreclk 0>;
status = "disabled";
};
spi1: spi@10680 {
reg = <0x10680 0x28>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <92>;
clocks = <&coreclk 0>;
status = "disabled";
};
i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
#address-cells = <1>;
@ -320,6 +300,42 @@ mvsdio@d4000 {
status = "disabled";
};
};
spi0: spi@10600 {
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
<MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
<MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
<MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
<MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
<MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
<MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
<MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
<MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <30>;
clocks = <&coreclk 0>;
status = "disabled";
};
spi1: spi@10680 {
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
<MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
<MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
<MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
<MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
<MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
<MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
<MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
<MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <92>;
clocks = <&coreclk 0>;
status = "disabled";
};
};
clocks {

34
arch/arm/boot/dts/armada-370.dtsi
View file

@ -134,24 +134,6 @@ L2: l2-cache {
wt-override;
};
/*
* Default SPI pinctrl setting, can be overwritten on
* board level if a different configuration is used.
*/
spi0: spi@10600 {
compatible = "marvell,armada-370-spi",
"marvell,orion-spi";
pinctrl-0 = <&spi0_pins1>;
pinctrl-names = "default";
};
spi1: spi@10680 {
compatible = "marvell,armada-370-spi",
"marvell,orion-spi";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
};
i2c0: i2c@11000 {
reg = <0x11000 0x20>;
};
@ -447,3 +429,19 @@ ge1_rgmii_pins: ge1-rgmii-pins {
marvell,function = "ge1";
};
};
/*
* Default SPI pinctrl setting, can be overwritten on
* board level if a different configuration is used.
*/
&spi0 {
compatible = "marvell,armada-370-spi", "marvell,orion-spi";
pinctrl-0 = <&spi0_pins1>;
pinctrl-names = "default";
};
&spi1 {
compatible = "marvell,armada-370-spi", "marvell,orion-spi";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
};

58
arch/arm/boot/dts/armada-385-db-ap.dts
View file

@ -65,20 +65,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi1: spi@10680 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <54000000>;
};
};
i2c0: i2c@11000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@ -155,6 +141,10 @@ ethernet@34000 {
bm,pool-short = <3>;
};
usb@58000 {
status = "okay";
};
/* CON4 */
ethernet@70000 {
pinctrl-names = "default";
@ -178,15 +168,35 @@ bm@c8000 {
nfc: flash@d0000 {
status = "okay";
#address-cells = <1>;
#size-cells = <1>;
num-cs = <1>;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0x00000000 0x00800000>;
read-only;
};
partition@800000 {
label = "uImage";
reg = <0x00800000 0x00400000>;
read-only;
};
partition@c00000 {
label = "Root";
reg = <0x00c00000 0x3f400000>;
};
};
};
usb3@f0000 {
@ -239,3 +249,17 @@ reg_xhci0_vbus: xhci0-vbus {
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <54000000>;
};
};

9
arch/arm/boot/dts/armada-385-linksys.dtsi
View file

@ -62,11 +62,6 @@ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
status = "disabled";
};
i2c@11000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@ -332,3 +327,7 @@ xhci0_vbus_pins: xhci0-vbus-pins {
marvell,function = "gpio";
};
};
&spi0 {
status = "disabled";
};

48
arch/arm/boot/dts/armada-388-clearfog.dts
View file

@ -315,30 +315,6 @@ serial@12100 {
status = "okay";
};
spi@10680 {
/*
* We don't seem to have the W25Q32 on the
* A1 Rev 2.0 boards, so disable SPI.
* CS0: W25Q32 (doesn't appear to be present)
* CS1:
* CS2: mikrobus
*/
pinctrl-0 = <&spi1_pins
&clearfog_spi1_cs_pins
&mikro_spi_pins>;
pinctrl-names = "default";
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "w25q32", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <3000000>;
status = "disabled";
};
};
usb@58000 {
/* CON3, nearest power. */
status = "okay";
@ -444,3 +420,27 @@ button_0 {
};
};
};
&spi1 {
/*
* We don't seem to have the W25Q32 on the
* A1 Rev 2.0 boards, so disable SPI.
* CS0: W25Q32 (doesn't appear to be present)
* CS1:
* CS2: mikrobus
*/
pinctrl-0 = <&spi1_pins
&clearfog_spi1_cs_pins
&mikro_spi_pins>;
pinctrl-names = "default";
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "w25q32", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <3000000>;
status = "disabled";
};
};

25
arch/arm/boot/dts/armada-388-db.dts
View file

@ -70,18 +70,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q32", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
@ -201,3 +189,16 @@ pcie@2,0 {
};
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q32", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};

30
arch/arm/boot/dts/armada-388-gp.dts
View file

@ -64,21 +64,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
spi@10600 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
m25p,fast-read;
};
};
i2c@11000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
@ -433,3 +418,18 @@ pca0_pins: pca0_pins {
marvell,function = "gpio";
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <50000000>;
m25p,fast-read;
};
};

25
arch/arm/boot/dts/armada-388-rd.dts
View file

@ -70,18 +70,6 @@ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
@ -142,3 +130,16 @@ pcie@1,0 {
};
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};

57
arch/arm/boot/dts/armada-38x.dtsi
View file

@ -170,30 +170,6 @@ gic: interrupt-controller@d000 {
<0xc100 0x100>;
};
spi0: spi@10600 {
compatible = "marvell,armada-380-spi",
"marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
spi1: spi@10680 {
compatible = "marvell,armada-380-spi",
"marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
@ -287,6 +263,15 @@ spi1_pins: spi-pins-1 {
marvell,function = "spi1";
};
nand_pins: nand-pins {
marvell,pins = "mpp22", "mpp34", "mpp23",
"mpp33", "mpp38", "mpp28",
"mpp40", "mpp42", "mpp35",
"mpp36", "mpp25", "mpp30",
"mpp32";
marvell,function = "dev";
};
uart0_pins: uart-pins-0 {
marvell,pins = "mpp0", "mpp1";
marvell,function = "ua0";
@ -649,6 +634,30 @@ bm_bppi: bm-bppi {
no-memory-wc;
status = "disabled";
};
spi0: spi@10600 {
compatible = "marvell,armada-380-spi",
"marvell,orion-spi";
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
spi1: spi@10680 {
compatible = "marvell,armada-380-spi",
"marvell,orion-spi";
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
};
clocks {

175
arch/arm/boot/dts/armada-390-db.dts Normal file
View file

@ -0,0 +1,175 @@
/*
* Device Tree file for Marvell Armada 390 Development Board
* (DB-88F6920)
*
* Copyright (C) 2016 Marvell
*
* Grzegorz Jaszczyk <jaz@semihalf.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "armada-390.dtsi"
/ {
model = "Marvell Armada 390 Development Board";
compatible = "marvell,a390-db", "marvell,armada390";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x80000000>; /* 2 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
/* CON104 */
serial@12000 {
status = "okay";
};
/* CON97 */
usb@58000 {
status = "okay";
};
flash@d0000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <8>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x800000>;
};
partition@800000 {
label = "Linux";
reg = <0x800000 0x800000>;
};
partition@1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
};
/* CON98 */
usb3@f8000 {
status = "okay";
};
};
pcie-controller {
status = "okay";
/* CON30 */
pcie@1,0 {
status = "okay";
};
/* CON44 */
pcie@2,0 {
status = "okay";
};
/* CON61 */
pcie@3,0 {
status = "okay";
};
};
};
};
&spi1 {
status = "okay";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
spi-flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13",
"jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x400000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x400000 0xc00000>;
};
};
};
};

3
arch/arm/boot/dts/armada-390.dtsi
View file

@ -47,6 +47,8 @@
#include "armada-39x.dtsi"
/ {
compatible = "marvell,armada390";
soc {
internal-regs {
pinctrl@18000 {
@ -54,4 +56,5 @@ pinctrl@18000 {
reg = <0x18000 0x20>;
};
};
};
};

163
arch/arm/boot/dts/armada-395-gp.dts Normal file
View file

@ -0,0 +1,163 @@
/*
* Device Tree file for Marvell Armada 395 GP board
*
* Copyright (C) 2016 Marvell
*
* Grzegorz Jaszczyk <jaz@semihalf.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "armada-395.dtsi"
/ {
model = "Marvell Armada 395 GP Board";
compatible = "marvell,a395-gp", "marvell,armada395",
"marvell,armada390";
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>; /* 1 GB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
serial@12000 {
/*
* Exported on the micro USB connector CON17
* through an FTDI
*/
status = "okay";
};
/* CON1 */
usb@58000 {
status = "okay";
};
/* CON2 */
sata@a8000 {
status = "okay";
};
flash@d0000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
num-cs = <1>;
marvell,nand-keep-config;
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0x00000000 0x00600000>;
read-only;
};
partition@800000 {
label = "uImage";
reg = <0x00600000 0x00400000>;
read-only;
};
partition@1000000 {
label = "Root";
reg = <0x00a00000 0x3f600000>;
};
};
};
/* CON18 */
sdhci@d8000 {
clock-frequency = <200000000>;
broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";
no-1-8-v;
};
/* CON4 */
usb3@f0000 {
status = "okay";
};
};
pcie-controller {
status = "okay";
/*
* The two PCIe units are accessible through
* mini PCIe slot on the board.
*/
/* CON7 */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
/* CON8 */
pcie@4,0 {
/* Port 3, Lane 0 */
status = "okay";
};
};
};
};

76
arch/arm/boot/dts/armada-395.dtsi Normal file
View file

@ -0,0 +1,76 @@
/*
* Device Tree Include file for Marvell Armada 395 SoC.
*
* Copyright (C) 2016 Marvell
*
* Grzegorz Jaszczyk <jaz@semihalf.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "armada-39x.dtsi"
/ {
compatible = "marvell,armada395", "marvell,armada390";
soc {
internal-regs {
pinctrl@18000 {
compatible = "marvell,mv88f6925-pinctrl";
reg = <0x18000 0x20>;
};
sata@a8000 {
compatible = "marvell,armada-380-ahci";
reg = <0xa8000 0x2000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 15>;
status = "disabled";
};
usb3@f0000 {
compatible = "marvell,armada-380-xhci";
reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 9>;
status = "disabled";
};
};
};
};

56
arch/arm/boot/dts/armada-398-db.dts
View file

@ -65,30 +65,6 @@ soc {
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
internal-regs {
spi@10680 {
status = "okay";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
partition@0 {
label = "U-Boot";
reg = <0 0x400000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x400000 0x1000000>;
};
};
};
i2c@11000 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
@ -108,6 +84,10 @@ serial@12100 {
status = "okay";
};
usb@58000 {
status = "okay";
};
flash@d0000 {
status = "okay";
pinctrl-0 = <&nand_pins>;
@ -132,6 +112,10 @@ partition@1000000 {
reg = <0x1000000 0x3f000000>;
};
};
usb3@f8000 {
status = "okay";
};
};
pcie-controller {
@ -151,3 +135,27 @@ pcie@3,0 {
};
};
};
&spi1 {
status = "okay";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
partition@0 {
label = "U-Boot";
reg = <0 0x400000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x400000 0x1000000>;
};
};
};

10
arch/arm/boot/dts/armada-398.dtsi
View file

@ -44,7 +44,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "armada-39x.dtsi"
#include "armada-395.dtsi"
/ {
compatible = "marvell,armada398", "marvell,armada390";
@ -55,6 +55,14 @@ pinctrl@18000 {
compatible = "marvell,mv88f6928-pinctrl";
reg = <0x18000 0x20>;
};
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 30>;
status = "disabled";
};
};
};
};

126
arch/arm/boot/dts/armada-39x.dtsi
View file

@ -55,6 +55,8 @@ / {
compatible = "marvell,armada390";
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
@ -78,6 +80,11 @@ cpu@1 {
};
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts-extended = <&mpic 3>;
};
soc {
compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
"simple-bus";
@ -131,30 +138,6 @@ gic: interrupt-controller@d000 {
<0xc100 0x100>;
};
spi0: spi@10600 {
compatible = "marvell,armada-390-spi",
"marvell,orion-spi";
reg = <0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
spi1: spi@10680 {
compatible = "marvell,armada-390-spi",
"marvell,orion-spi";
reg = <0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
i2c0: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
@ -269,6 +252,34 @@ nand_pins: nand-pins {
};
};
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
gpio1: gpio@18140 {
compatible = "marvell,orion-gpio";
reg = <0x18140 0x40>;
ngpios = <28>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
system-controller@18200 {
compatible = "marvell,armada-390-system-controller",
"marvell,armada-370-xp-system-controller";
@ -317,11 +328,29 @@ timer@20300 {
clock-names = "nbclk", "fixed";
};
watchdog@20300 {
compatible = "marvell,armada-380-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>,
<0x18260 0x4>;
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
};
cpurst@20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
mpcore-soc-ctrl@20d20 {
compatible = "marvell,armada-380-mpcore-soc-ctrl";
reg = <0x20d20 0x6c>;
};
coherency-fabric@21010 {
compatible = "marvell,armada-380-coherency-fabric";
reg = <0x21010 0x1c>;
};
pmsu@22000 {
compatible = "marvell,armada-390-pmsu",
"marvell,armada-380-pmsu";
@ -368,6 +397,13 @@ xor11 {
};
};
rtc@a3800 {
compatible = "marvell,armada-380-rtc";
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
reg-names = "rtc", "rtc-soc";
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
};
flash@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
@ -380,7 +416,10 @@ flash@d0000 {
sdhci@d8000 {
compatible = "marvell,armada-380-sdhci";
reg = <0xd8000 0x1000>, <0xdc000 0x100>;
reg-names = "sdhci", "mbus", "conf-sdio3";
reg = <0xd8000 0x1000>,
<0xdc000 0x100>,
<0x18454 0x4>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 17>;
mrvl,clk-delay-cycles = <0x1F>;
@ -395,6 +434,12 @@ coredivclk: clock@e4250 {
clocks = <&mainpll>;
clock-output-names = "nand";
};
thermal@e8078 {
compatible = "marvell,armada380-thermal";
reg = <0xe4078 0x4>, <0xe4074 0x4>;
status = "okay";
};
};
pcie-controller {
@ -501,6 +546,30 @@ pcie@4,0 {
status = "disabled";
};
};
spi0: spi@10600 {
compatible = "marvell,armada-390-spi",
"marvell,orion-spi";
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
spi1: spi@10680 {
compatible = "marvell,armada-390-spi",
"marvell,orion-spi";
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
};
clocks {
@ -510,5 +579,12 @@ mainpll: mainpll {
#clock-cells = <0>;
clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
refclk: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
};
};

24
arch/arm/boot/dts/armada-xp-axpwifiap.dts
View file

@ -135,18 +135,6 @@ ethernet@74000 {
phy = <&phy1>;
phy-mode = "rgmii-id";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
};
};
@ -179,3 +167,15 @@ phy_int_pin: phy-int-pin {
marvell,function = "gpio";
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};

24
arch/arm/boot/dts/armada-xp-db.dts
View file

@ -231,18 +231,6 @@ usb@52000 {
status = "okay";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
};
nand@d0000 {
status = "okay";
num-cs = <1>;
@ -277,3 +265,15 @@ bm-bppi {
};
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
};
};

24
arch/arm/boot/dts/armada-xp-gp.dts
View file

@ -232,18 +232,6 @@ usb@51000 {
status = "okay";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};
bm@c0000 {
status = "okay";
};
@ -262,3 +250,15 @@ bm-bppi {
};
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <108000000>;
};
};

24
arch/arm/boot/dts/armada-xp-linksys-mamba.dts
View file

@ -279,18 +279,6 @@ partition@180000 {
reg = <0x180000 0x780000>; /* 7.5MB */
};
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "everspin,mr25h256";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <40000000>;
};
};
};
};
@ -398,3 +386,15 @@ gpio_fan_pin: gpio-fan-pin {
marvell,function = "gpio";
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "everspin,mr25h256";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <40000000>;
};
};

112
arch/arm/boot/dts/armada-xp-synology-ds414.dts
View file

@ -110,62 +110,6 @@ rtc@10300 {
status = "disabled";
};
spi0: spi@10600 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
/*
* Warning!
*
* Synology u-boot uses its compiled-in environment
* and it seems Synology did not care to change u-boot
* default configuration in order to allow saving a
* modified environment at a sensible location. So,
* if you do a 'saveenv' under u-boot, your modified
* environment will be saved at 1MB after the start
* of the flash, i.e. in the middle of the uImage.
* For that reason, it is strongly advised not to
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000d0000>; /* 832KB */
};
partition@000c0000 { /* uImage */
label = "zImage";
reg = <0x000d0000 0x002d0000>; /* 2880KB */
};
partition@003a0000 { /* uInitramfs */
label = "rd.gz";
reg = <0x003a0000 0x00430000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
};
};
i2c@11000 {
clock-frequency = <400000>;
status = "okay";
@ -362,3 +306,59 @@ fan2_alarm_pin: fan2-alarm-pin {
marvell,function = "gpio";
};
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064", "jedec,spi-nor";
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
/*
* Warning!
*
* Synology u-boot uses its compiled-in environment
* and it seems Synology did not care to change u-boot
* default configuration in order to allow saving a
* modified environment at a sensible location. So,
* if you do a 'saveenv' under u-boot, your modified
* environment will be saved at 1MB after the start
* of the flash, i.e. in the middle of the uImage.
* For that reason, it is strongly advised not to
* change the default environment, unless you know
* what you are doing.
*/
partition@00000000 { /* u-boot */
label = "RedBoot";
reg = <0x00000000 0x000d0000>; /* 832KB */
};
partition@000c0000 { /* uImage */
label = "zImage";
reg = <0x000d0000 0x002d0000>; /* 2880KB */
};
partition@003a0000 { /* uInitramfs */
label = "rd.gz";
reg = <0x003a0000 0x00430000>; /* 4250KB */
};
partition@007d0000 { /* MAC address and serial number */
label = "vendor";
reg = <0x007d0000 0x00010000>; /* 64KB */
};
partition@007e0000 {
label = "RedBoot config";
reg = <0x007e0000 0x00010000>; /* 64KB */
};
partition@007f0000 {
label = "FIS directory";
reg = <0x007f0000 0x00010000>; /* 64KB */
};
};
};

31
arch/arm/boot/dts/armada-xp.dtsi
View file

@ -84,19 +84,6 @@ L2: l2-cache {
wt-override;
};
spi0: spi@10600 {
compatible = "marvell,armada-xp-spi",
"marvell,orion-spi";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
};
spi1: spi@10680 {
compatible = "marvell,armada-xp-spi",
"marvell,orion-spi";
};
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
@ -362,6 +349,12 @@ spi0_pins: spi0-pins {
marvell,function = "spi0";
};
spi1_pins: spi1-pins {
marvell,pins = "mpp13", "mpp14",
"mpp16", "mpp17";
marvell,function = "spi1";
};
uart2_pins: uart2-pins {
marvell,pins = "mpp42", "mpp43";
marvell,function = "uart2";
@ -372,3 +365,15 @@ uart3_pins: uart3-pins {
marvell,function = "uart3";
};
};
&spi0 {
compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
pinctrl-0 = <&spi0_pins>;
pinctrl-names = "default";
};
&spi1 {
compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
};

2
arch/arm/boot/dts/armv7-m.dtsi
View file

@ -1,5 +1,3 @@
#include "skeleton.dtsi"
/ {
nvic: interrupt-controller@e000e100 {
compatible = "arm,armv7m-nvic";

31
arch/arm/boot/dts/artpec6.dtsi
View file

@ -41,6 +41,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
#include "skeleton.dtsi"
/ {
@ -109,14 +110,14 @@ gtimer@faf00200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0xfaf00200 0x20>;
interrupts = <GIC_PPI 11 0xf01>;
clocks = <&clkctrl 1>;
clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
};
timer@faf00600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfaf00600 0x20>;
interrupts = <GIC_PPI 13 0xf04>;
clocks = <&clkctrl 1>;
clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
status = "disabled";
};
@ -136,12 +137,20 @@ pl310: cache-controller@faf10000 {
arm,data-latency = <1 1 1>;
arm,tag-latency = <1 1 1>;
arm,filter-ranges = <0x0 0x80000000>;
arm,double-linefill = <1>;
arm,double-linefill-incr = <0>;
arm,double-linefill-wrap = <0>;
prefetch-data = <1>;
prefetch-instr = <1>;
arm,prefetch-offset = <0>;
arm,prefetch-drop = <1>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
interrupt-parent = <&intc>;
};
@ -157,7 +166,7 @@ amba@0 {
ethernet: ethernet@f8010000 {
clock-names = "phy_ref_clk", "apb_pclk";
clocks = <&eth_phy_ref_clk>,
<&clkctrl 4>;
<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
compatible = "snps,dwc-qos-ethernet-4.10";
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@ -175,8 +184,8 @@ uart0: serial@f8036000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8036000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};
@ -184,8 +193,8 @@ uart1: serial@f8037000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8037000 0x1000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};
@ -193,8 +202,8 @@ uart2: serial@f8038000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8038000 0x1000>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};
@ -202,8 +211,8 @@ uart3: serial@f8039000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xf8039000 0x1000>;
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkctrl 13>,
<&clkctrl 12>;
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
clock-names = "uart_clk", "apb_pclk";
status = "disabled";
};

6
arch/arm/boot/dts/axp209.dtsi
View file

@ -53,6 +53,12 @@ &axp209 {
interrupt-controller;
#interrupt-cells = <1>;
axp_gpio: gpio {
compatible = "x-powers,axp209-gpio";
gpio-controller;
#gpio-cells = <2>;
};
regulators {
/* Default work frequency for buck regulators */
x-powers,dcdc-freq = <1500>;

37
arch/arm/boot/dts/bcm-nsp.dtsi
View file

@ -209,6 +209,24 @@ dma@20000 {
#dma-cells = <1>;
};
amac0: ethernet@22000 {
compatible = "brcm,nsp-amac";
reg = <0x022000 0x1000>,
<0x110000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
amac1: ethernet@23000 {
compatible = "brcm,nsp-amac";
reg = <0x023000 0x1000>,
<0x111000 0x1000>;
reg-names = "amac_base", "idm_base";
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
nand: nand@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
@ -223,6 +241,14 @@ nand: nand@26000 {
brcm,nand-has-wp;
};
pwm: pwm@31000 {
compatible = "brcm,iproc-pwm";
reg = <0x31000 0x28>;
clocks = <&osc>;
#pwm-cells = <3>;
status = "disabled";
};
rng: rng@33000 {
compatible = "brcm,bcm-nsp-rng";
reg = <0x33000 0x14>;
@ -246,6 +272,17 @@ ccbtimer1: timer@35000 {
clock-names = "apb_pclk";
};
srab: srab@36000 {
compatible = "brcm,nsp-srab";
reg = <0x36000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
/* ports are defined in board DTS */
};
i2c0: i2c@38000 {
compatible = "brcm,iproc-i2c";
reg = <0x38000 0x50>;

1
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
View file

@ -1,6 +1,7 @@
/dts-v1/;
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";

1
arch/arm/boot/dts/bcm2835-rpi-a.dts
View file

@ -1,6 +1,7 @@
/dts-v1/;
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,model-a", "brcm,bcm2835";

1
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
View file

@ -2,6 +2,7 @@
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";

1
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
View file

@ -2,6 +2,7 @@
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9512.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";

1
arch/arm/boot/dts/bcm2835-rpi-b.dts
View file

@ -2,6 +2,7 @@
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9512.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,model-b", "brcm,bcm2835";

40
arch/arm/boot/dts/bcm2835-rpi-zero.dts Normal file
View file

@ -0,0 +1,40 @@
/*
* Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "bcm2835.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
model = "Raspberry Pi Zero";
leds {
act {
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
};
};
};
&gpio {
pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
/* I2S interface */
i2s_alt0: i2s_alt0 {
brcm,pins = <18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&hdmi {
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
};

1
arch/arm/boot/dts/bcm2836-rpi-2-b.dts
View file

@ -2,6 +2,7 @@
#include "bcm2836.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";

3
arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi Normal file
View file

@ -0,0 +1,3 @@
&usb {
dr_mode = "host";
};

9
arch/arm/boot/dts/bcm283x.dtsi
View file

@ -290,6 +290,8 @@ usb: usb@7e980000 {
interrupts = <1 9>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk_usb>;
clock-names = "otg";
};
v3d: v3d@7ec00000 {
@ -317,5 +319,12 @@ clk_osc: clock@3 {
clock-frequency = <19200000>;
};
clk_usb: clock@4 {
compatible = "fixed-clock";
reg = <4>;
#clock-cells = <0>;
clock-output-names = "otg";
clock-frequency = <480000000>;
};
};
};

11
arch/arm/boot/dts/bcm5301x.dtsi
View file

@ -140,6 +140,15 @@ periph_clk: periph_clk {
};
};
usb2_phy: usb2-phy {
compatible = "brcm,ns-usb2-phy";
reg = <0x1800c000 0x1000>;
reg-names = "dmu";
#phy-cells = <0>;
clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
clock-names = "phy-ref-clk";
};
axi@18000000 {
compatible = "brcm,bus-axi";
reg = <0x18000000 0x1000>;
@ -232,6 +241,8 @@ usb2: usb2@21000 {
#address-cells = <1>;
#size-cells = <1>;
phys = <&usb2_phy>;
};
usb3: usb3@23000 {

130
arch/arm/boot/dts/bcm958522er.dts Normal file
View file

@ -0,0 +1,130 @@
/*
* BSD LICENSE
*
* Copyright(c) 2016 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
#include "bcm-nsp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "NorthStar Plus SVK (BCM958522ER)";
compatible = "brcm,bcm58522", "brcm,nsp";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
priority = <200>;
};
};
/* USB 2/3 support needed to be complete */
&amac0 {
status = "okay";
};
&amac1 {
status = "okay";
};
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-strength = <24>;
nand-ecc-step-size = <1024>;
brcm,nand-oob-sector-size = <27>;
partition@0 {
label = "nboot";
reg = <0x00000000 0x00200000>;
read-only;
};
partition@200000 {
label = "nenv";
reg = <0x00200000 0x00400000>;
};
partition@600000 {
label = "nsystem";
reg = <0x00600000 0x00a00000>;
};
partition@1000000 {
label = "nrootfs";
reg = <0x01000000 0x03000000>;
};
partition@4000000 {
label = "ncustfs";
reg = <0x04000000 0x3c000000>;
};
};
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&nand_sel>;
nand_sel: nand_sel {
function = "nand";
groups = "nand_grp";
};
};
&uart0 {
status = "okay";
};

142
arch/arm/boot/dts/bcm958525er.dts Normal file
View file

@ -0,0 +1,142 @@
/*
* BSD LICENSE
*
* Copyright(c) 2016 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
#include "bcm-nsp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "NorthStar Plus SVK (BCM958525ER)";
compatible = "brcm,bcm58525", "brcm,nsp";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
gpio-restart {
compatible = "gpio-restart";
gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
priority = <200>;
};
};
/* USB 2/3 support needed to be complete */
&amac0 {
status = "okay";
};
&amac1 {
status = "okay";
};
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-on-flash-bbt;
#address-cells = <1>;
#size-cells = <1>;
nand-ecc-strength = <24>;
nand-ecc-step-size = <1024>;
brcm,nand-oob-sector-size = <27>;
partition@0 {
label = "nboot";
reg = <0x00000000 0x00200000>;
read-only;
};
partition@200000 {
label = "nenv";
reg = <0x00200000 0x00400000>;
};
partition@600000 {
label = "nsystem";
reg = <0x00600000 0x00a00000>;
};
partition@1000000 {
label = "nrootfs";
reg = <0x01000000 0x03000000>;
};
partition@4000000 {
label = "ncustfs";
reg = <0x04000000 0x3c000000>;
};
};
};
&pcie0 {
status = "okay";
};
&pcie1 {
status = "okay";
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&nand_sel>;
nand_sel: nand_sel {
function = "nand";
groups = "nand_grp";
};
};
&sata_phy0 {
status = "okay";
};
&sata_phy1 {
status = "okay";
};
&sata {
status = "okay";
};
&uart0 {
status = "okay";
};

Some files were not shown because too many files have changed in this diff Show more