linux/lib/devres.c

401 lines
10 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/export.h>
#include <linux/gfp_types.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/of_address.h>
#include <linux/types.h>
enum devm_ioremap_type {
DEVM_IOREMAP = 0,
DEVM_IOREMAP_UC,
DEVM_IOREMAP_WC,
DEVM_IOREMAP_NP,
};
void devm_ioremap_release(struct device *dev, void *res)
{
iounmap(*(void __iomem **)res);
}
static int devm_ioremap_match(struct device *dev, void *res, void *match_data)
{
return *(void **)res == match_data;
}
static void __iomem *__devm_ioremap(struct device *dev, resource_size_t offset,
resource_size_t size,
enum devm_ioremap_type type)
{
void __iomem **ptr, *addr = NULL;
ptr = devres_alloc_node(devm_ioremap_release, sizeof(*ptr), GFP_KERNEL,
dev_to_node(dev));
if (!ptr)
return NULL;
switch (type) {
case DEVM_IOREMAP:
addr = ioremap(offset, size);
break;
case DEVM_IOREMAP_UC:
addr = ioremap_uc(offset, size);
break;
case DEVM_IOREMAP_WC:
addr = ioremap_wc(offset, size);
break;
case DEVM_IOREMAP_NP:
addr = ioremap_np(offset, size);
break;
}
if (addr) {
*ptr = addr;
devres_add(dev, ptr);
} else
devres_free(ptr);
return addr;
}
/**
* devm_ioremap - Managed ioremap()
* @dev: Generic device to remap IO address for
* @offset: Resource address to map
* @size: Size of map
*
* Managed ioremap(). Map is automatically unmapped on driver detach.
*/
void __iomem *devm_ioremap(struct device *dev, resource_size_t offset,
resource_size_t size)
{
return __devm_ioremap(dev, offset, size, DEVM_IOREMAP);
}
EXPORT_SYMBOL(devm_ioremap);
/**
* devm_ioremap_uc - Managed ioremap_uc()
* @dev: Generic device to remap IO address for
* @offset: Resource address to map
* @size: Size of map
*
* Managed ioremap_uc(). Map is automatically unmapped on driver detach.
*/
void __iomem *devm_ioremap_uc(struct device *dev, resource_size_t offset,
resource_size_t size)
{
return __devm_ioremap(dev, offset, size, DEVM_IOREMAP_UC);
}
EXPORT_SYMBOL_GPL(devm_ioremap_uc);
/**
* devm_ioremap_wc - Managed ioremap_wc()
* @dev: Generic device to remap IO address for
* @offset: Resource address to map
* @size: Size of map
*
* Managed ioremap_wc(). Map is automatically unmapped on driver detach.
*/
void __iomem *devm_ioremap_wc(struct device *dev, resource_size_t offset,
resource_size_t size)
{
return __devm_ioremap(dev, offset, size, DEVM_IOREMAP_WC);
}
EXPORT_SYMBOL(devm_ioremap_wc);
/**
* devm_iounmap - Managed iounmap()
* @dev: Generic device to unmap for
* @addr: Address to unmap
*
* Managed iounmap(). @addr must have been mapped using devm_ioremap*().
*/
void devm_iounmap(struct device *dev, void __iomem *addr)
{
WARN_ON(devres_destroy(dev, devm_ioremap_release, devm_ioremap_match,
2014-04-03 21:49:07 +00:00
(__force void *)addr));
iounmap(addr);
}
EXPORT_SYMBOL(devm_iounmap);
static void __iomem *
__devm_ioremap_resource(struct device *dev, const struct resource *res,
enum devm_ioremap_type type)
{
resource_size_t size;
void __iomem *dest_ptr;
devres: keep both device name and resource name in pretty name Sometimes debugging a device is easiest using devmem on its register map, and that can be seen with /proc/iomem. But some device drivers have many memory regions. Take for example a networking switch. Its memory map used to look like this in /proc/iomem: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : sys 1fc030000-1fc03ffff : rew 1fc060000-1fc0603ff : s2 1fc070000-1fc0701ff : devcpu_gcb 1fc080000-1fc0800ff : qs 1fc090000-1fc0900cb : ptp 1fc100000-1fc10ffff : port0 1fc110000-1fc11ffff : port1 1fc120000-1fc12ffff : port2 1fc130000-1fc13ffff : port3 1fc140000-1fc14ffff : port4 1fc150000-1fc15ffff : port5 1fc200000-1fc21ffff : qsys 1fc280000-1fc28ffff : ana But after the patch in Fixes: was applied, the information is now presented in a much more opaque way: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 1fc030000-1fc03ffff : 0000:00:00.5 1fc060000-1fc0603ff : 0000:00:00.5 1fc070000-1fc0701ff : 0000:00:00.5 1fc080000-1fc0800ff : 0000:00:00.5 1fc090000-1fc0900cb : 0000:00:00.5 1fc100000-1fc10ffff : 0000:00:00.5 1fc110000-1fc11ffff : 0000:00:00.5 1fc120000-1fc12ffff : 0000:00:00.5 1fc130000-1fc13ffff : 0000:00:00.5 1fc140000-1fc14ffff : 0000:00:00.5 1fc150000-1fc15ffff : 0000:00:00.5 1fc200000-1fc21ffff : 0000:00:00.5 1fc280000-1fc28ffff : 0000:00:00.5 That patch made a fair comment that /proc/iomem might be confusing when it shows resources without an associated device, but we can do better than just hide the resource name altogether. Namely, we can print the device name _and_ the resource name. Like this: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 sys 1fc030000-1fc03ffff : 0000:00:00.5 rew 1fc060000-1fc0603ff : 0000:00:00.5 s2 1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb 1fc080000-1fc0800ff : 0000:00:00.5 qs 1fc090000-1fc0900cb : 0000:00:00.5 ptp 1fc100000-1fc10ffff : 0000:00:00.5 port0 1fc110000-1fc11ffff : 0000:00:00.5 port1 1fc120000-1fc12ffff : 0000:00:00.5 port2 1fc130000-1fc13ffff : 0000:00:00.5 port3 1fc140000-1fc14ffff : 0000:00:00.5 port4 1fc150000-1fc15ffff : 0000:00:00.5 port5 1fc200000-1fc21ffff : 0000:00:00.5 qsys 1fc280000-1fc28ffff : 0000:00:00.5 ana Fixes: 8d84b18f5678 ("devres: always use dev_name() in devm_ioremap_resource()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200601095826.1757621-1-olteanv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-01 09:58:26 +00:00
char *pretty_name;
int ret;
BUG_ON(!dev);
if (!res || resource_type(res) != IORESOURCE_MEM) {
ret = dev_err_probe(dev, -EINVAL, "invalid resource %pR\n", res);
return IOMEM_ERR_PTR(ret);
}
if (type == DEVM_IOREMAP && res->flags & IORESOURCE_MEM_NONPOSTED)
type = DEVM_IOREMAP_NP;
size = resource_size(res);
devres: keep both device name and resource name in pretty name Sometimes debugging a device is easiest using devmem on its register map, and that can be seen with /proc/iomem. But some device drivers have many memory regions. Take for example a networking switch. Its memory map used to look like this in /proc/iomem: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : sys 1fc030000-1fc03ffff : rew 1fc060000-1fc0603ff : s2 1fc070000-1fc0701ff : devcpu_gcb 1fc080000-1fc0800ff : qs 1fc090000-1fc0900cb : ptp 1fc100000-1fc10ffff : port0 1fc110000-1fc11ffff : port1 1fc120000-1fc12ffff : port2 1fc130000-1fc13ffff : port3 1fc140000-1fc14ffff : port4 1fc150000-1fc15ffff : port5 1fc200000-1fc21ffff : qsys 1fc280000-1fc28ffff : ana But after the patch in Fixes: was applied, the information is now presented in a much more opaque way: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 1fc030000-1fc03ffff : 0000:00:00.5 1fc060000-1fc0603ff : 0000:00:00.5 1fc070000-1fc0701ff : 0000:00:00.5 1fc080000-1fc0800ff : 0000:00:00.5 1fc090000-1fc0900cb : 0000:00:00.5 1fc100000-1fc10ffff : 0000:00:00.5 1fc110000-1fc11ffff : 0000:00:00.5 1fc120000-1fc12ffff : 0000:00:00.5 1fc130000-1fc13ffff : 0000:00:00.5 1fc140000-1fc14ffff : 0000:00:00.5 1fc150000-1fc15ffff : 0000:00:00.5 1fc200000-1fc21ffff : 0000:00:00.5 1fc280000-1fc28ffff : 0000:00:00.5 That patch made a fair comment that /proc/iomem might be confusing when it shows resources without an associated device, but we can do better than just hide the resource name altogether. Namely, we can print the device name _and_ the resource name. Like this: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 sys 1fc030000-1fc03ffff : 0000:00:00.5 rew 1fc060000-1fc0603ff : 0000:00:00.5 s2 1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb 1fc080000-1fc0800ff : 0000:00:00.5 qs 1fc090000-1fc0900cb : 0000:00:00.5 ptp 1fc100000-1fc10ffff : 0000:00:00.5 port0 1fc110000-1fc11ffff : 0000:00:00.5 port1 1fc120000-1fc12ffff : 0000:00:00.5 port2 1fc130000-1fc13ffff : 0000:00:00.5 port3 1fc140000-1fc14ffff : 0000:00:00.5 port4 1fc150000-1fc15ffff : 0000:00:00.5 port5 1fc200000-1fc21ffff : 0000:00:00.5 qsys 1fc280000-1fc28ffff : 0000:00:00.5 ana Fixes: 8d84b18f5678 ("devres: always use dev_name() in devm_ioremap_resource()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200601095826.1757621-1-olteanv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-01 09:58:26 +00:00
if (res->name)
pretty_name = devm_kasprintf(dev, GFP_KERNEL, "%s %s",
dev_name(dev), res->name);
else
pretty_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
if (!pretty_name) {
ret = dev_err_probe(dev, -ENOMEM, "can't generate pretty name for resource %pR\n", res);
return IOMEM_ERR_PTR(ret);
}
devres: keep both device name and resource name in pretty name Sometimes debugging a device is easiest using devmem on its register map, and that can be seen with /proc/iomem. But some device drivers have many memory regions. Take for example a networking switch. Its memory map used to look like this in /proc/iomem: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : sys 1fc030000-1fc03ffff : rew 1fc060000-1fc0603ff : s2 1fc070000-1fc0701ff : devcpu_gcb 1fc080000-1fc0800ff : qs 1fc090000-1fc0900cb : ptp 1fc100000-1fc10ffff : port0 1fc110000-1fc11ffff : port1 1fc120000-1fc12ffff : port2 1fc130000-1fc13ffff : port3 1fc140000-1fc14ffff : port4 1fc150000-1fc15ffff : port5 1fc200000-1fc21ffff : qsys 1fc280000-1fc28ffff : ana But after the patch in Fixes: was applied, the information is now presented in a much more opaque way: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 1fc030000-1fc03ffff : 0000:00:00.5 1fc060000-1fc0603ff : 0000:00:00.5 1fc070000-1fc0701ff : 0000:00:00.5 1fc080000-1fc0800ff : 0000:00:00.5 1fc090000-1fc0900cb : 0000:00:00.5 1fc100000-1fc10ffff : 0000:00:00.5 1fc110000-1fc11ffff : 0000:00:00.5 1fc120000-1fc12ffff : 0000:00:00.5 1fc130000-1fc13ffff : 0000:00:00.5 1fc140000-1fc14ffff : 0000:00:00.5 1fc150000-1fc15ffff : 0000:00:00.5 1fc200000-1fc21ffff : 0000:00:00.5 1fc280000-1fc28ffff : 0000:00:00.5 That patch made a fair comment that /proc/iomem might be confusing when it shows resources without an associated device, but we can do better than just hide the resource name altogether. Namely, we can print the device name _and_ the resource name. Like this: 1fc000000-1fc3fffff : pcie@1f0000000 1fc000000-1fc3fffff : 0000:00:00.5 1fc010000-1fc01ffff : 0000:00:00.5 sys 1fc030000-1fc03ffff : 0000:00:00.5 rew 1fc060000-1fc0603ff : 0000:00:00.5 s2 1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb 1fc080000-1fc0800ff : 0000:00:00.5 qs 1fc090000-1fc0900cb : 0000:00:00.5 ptp 1fc100000-1fc10ffff : 0000:00:00.5 port0 1fc110000-1fc11ffff : 0000:00:00.5 port1 1fc120000-1fc12ffff : 0000:00:00.5 port2 1fc130000-1fc13ffff : 0000:00:00.5 port3 1fc140000-1fc14ffff : 0000:00:00.5 port4 1fc150000-1fc15ffff : 0000:00:00.5 port5 1fc200000-1fc21ffff : 0000:00:00.5 qsys 1fc280000-1fc28ffff : 0000:00:00.5 ana Fixes: 8d84b18f5678 ("devres: always use dev_name() in devm_ioremap_resource()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20200601095826.1757621-1-olteanv@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-01 09:58:26 +00:00
if (!devm_request_mem_region(dev, res->start, size, pretty_name)) {
ret = dev_err_probe(dev, -EBUSY, "can't request region for resource %pR\n", res);
return IOMEM_ERR_PTR(ret);
}
dest_ptr = __devm_ioremap(dev, res->start, size, type);
if (!dest_ptr) {
devm_release_mem_region(dev, res->start, size);
ret = dev_err_probe(dev, -ENOMEM, "ioremap failed for resource %pR\n", res);
return IOMEM_ERR_PTR(ret);
}
return dest_ptr;
}
/**
* devm_ioremap_resource() - check, request region, and ioremap resource
* @dev: generic device to handle the resource for
* @res: resource to be handled
*
* Checks that a resource is a valid memory region, requests the memory
* region and ioremaps it. All operations are managed and will be undone
* on driver detach.
*
* Usage example:
*
* res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
* base = devm_ioremap_resource(&pdev->dev, res);
* if (IS_ERR(base))
* return PTR_ERR(base);
*
* Return: a pointer to the remapped memory or an ERR_PTR() encoded error code
* on failure.
*/
void __iomem *devm_ioremap_resource(struct device *dev,
const struct resource *res)
{
return __devm_ioremap_resource(dev, res, DEVM_IOREMAP);
}
lib: devres: Introduce devm_ioremap_resource() The devm_request_and_ioremap() function is very useful and helps avoid a whole lot of boilerplate. However, one issue that keeps popping up is its lack of a specific error code to determine which of the steps that it performs failed. Furthermore, while the function gives an example and suggests what error code to return on failure, a wide variety of error codes are used throughout the tree. In an attempt to fix these problems, this patch adds a new function that drivers can transition to. The devm_ioremap_resource() returns a pointer to the remapped I/O memory on success or an ERR_PTR() encoded error code on failure. Callers can check for failure using IS_ERR() and determine its cause by extracting the error code using PTR_ERR(). devm_request_and_ioremap() is implemented as a wrapper around the new API and return NULL on failure as before. This ensures that backwards compatibility is maintained until all users have been converted to the new API, at which point the old devm_request_and_ioremap() function should be removed. A semantic patch is included which can be used to convert from the old devm_request_and_ioremap() API to the new devm_ioremap_resource() API. Some non-trivial cases may require manual intervention, though. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 10:08:54 +00:00
EXPORT_SYMBOL(devm_ioremap_resource);
/**
* devm_ioremap_resource_wc() - write-combined variant of
* devm_ioremap_resource()
* @dev: generic device to handle the resource for
* @res: resource to be handled
*
* Return: a pointer to the remapped memory or an ERR_PTR() encoded error code
* on failure.
*/
void __iomem *devm_ioremap_resource_wc(struct device *dev,
const struct resource *res)
{
return __devm_ioremap_resource(dev, res, DEVM_IOREMAP_WC);
}
/*
* devm_of_iomap - Requests a resource and maps the memory mapped IO
* for a given device_node managed by a given device
*
* Checks that a resource is a valid memory region, requests the memory
* region and ioremaps it. All operations are managed and will be undone
* on driver detach of the device.
*
* This is to be used when a device requests/maps resources described
* by other device tree nodes (children or otherwise).
*
* @dev: The device "managing" the resource
* @node: The device-tree node where the resource resides
* @index: index of the MMIO range in the "reg" property
* @size: Returns the size of the resource (pass NULL if not needed)
*
* Usage example:
*
* base = devm_of_iomap(&pdev->dev, node, 0, NULL);
* if (IS_ERR(base))
* return PTR_ERR(base);
*
* Please Note: This is not a one-to-one replacement for of_iomap() because the
* of_iomap() function does not track whether the region is already mapped. If
* two drivers try to map the same memory, the of_iomap() function will succeed
* but the devm_of_iomap() function will return -EBUSY.
*
* Return: a pointer to the requested and mapped memory or an ERR_PTR() encoded
* error code on failure.
*/
void __iomem *devm_of_iomap(struct device *dev, struct device_node *node, int index,
resource_size_t *size)
{
struct resource res;
if (of_address_to_resource(node, index, &res))
return IOMEM_ERR_PTR(-EINVAL);
if (size)
*size = resource_size(&res);
return devm_ioremap_resource(dev, &res);
}
EXPORT_SYMBOL(devm_of_iomap);
#ifdef CONFIG_HAS_IOPORT_MAP
/*
* Generic iomap devres
*/
static void devm_ioport_map_release(struct device *dev, void *res)
{
ioport_unmap(*(void __iomem **)res);
}
static int devm_ioport_map_match(struct device *dev, void *res,
void *match_data)
{
return *(void **)res == match_data;
}
/**
* devm_ioport_map - Managed ioport_map()
* @dev: Generic device to map ioport for
* @port: Port to map
* @nr: Number of ports to map
*
* Managed ioport_map(). Map is automatically unmapped on driver
* detach.
*
* Return: a pointer to the remapped memory or NULL on failure.
*/
void __iomem *devm_ioport_map(struct device *dev, unsigned long port,
unsigned int nr)
{
void __iomem **ptr, *addr;
ptr = devres_alloc_node(devm_ioport_map_release, sizeof(*ptr), GFP_KERNEL,
dev_to_node(dev));
if (!ptr)
return NULL;
addr = ioport_map(port, nr);
if (addr) {
*ptr = addr;
devres_add(dev, ptr);
} else
devres_free(ptr);
return addr;
}
EXPORT_SYMBOL(devm_ioport_map);
/**
* devm_ioport_unmap - Managed ioport_unmap()
* @dev: Generic device to unmap for
* @addr: Address to unmap
*
* Managed ioport_unmap(). @addr must have been mapped using
* devm_ioport_map().
*/
void devm_ioport_unmap(struct device *dev, void __iomem *addr)
{
ioport_unmap(addr);
WARN_ON(devres_destroy(dev, devm_ioport_map_release,
2014-04-03 21:49:07 +00:00
devm_ioport_map_match, (__force void *)addr));
}
EXPORT_SYMBOL(devm_ioport_unmap);
#endif /* CONFIG_HAS_IOPORT_MAP */
static void devm_arch_phys_ac_add_release(struct device *dev, void *res)
{
arch_phys_wc_del(*((int *)res));
}
/**
* devm_arch_phys_wc_add - Managed arch_phys_wc_add()
* @dev: Managed device
* @base: Memory base address
* @size: Size of memory range
*
* Adds a WC MTRR using arch_phys_wc_add() and sets up a release callback.
* See arch_phys_wc_add() for more information.
*/
int devm_arch_phys_wc_add(struct device *dev, unsigned long base, unsigned long size)
{
int *mtrr;
int ret;
mtrr = devres_alloc_node(devm_arch_phys_ac_add_release, sizeof(*mtrr), GFP_KERNEL,
dev_to_node(dev));
if (!mtrr)
return -ENOMEM;
ret = arch_phys_wc_add(base, size);
if (ret < 0) {
devres_free(mtrr);
return ret;
}
*mtrr = ret;
devres_add(dev, mtrr);
return ret;
}
EXPORT_SYMBOL(devm_arch_phys_wc_add);
struct arch_io_reserve_memtype_wc_devres {
resource_size_t start;
resource_size_t size;
};
static void devm_arch_io_free_memtype_wc_release(struct device *dev, void *res)
{
const struct arch_io_reserve_memtype_wc_devres *this = res;
arch_io_free_memtype_wc(this->start, this->size);
}
/**
* devm_arch_io_reserve_memtype_wc - Managed arch_io_reserve_memtype_wc()
* @dev: Managed device
* @start: Memory base address
* @size: Size of memory range
*
* Reserves a memory range with WC caching using arch_io_reserve_memtype_wc()
* and sets up a release callback See arch_io_reserve_memtype_wc() for more
* information.
*/
int devm_arch_io_reserve_memtype_wc(struct device *dev, resource_size_t start,
resource_size_t size)
{
struct arch_io_reserve_memtype_wc_devres *dr;
int ret;
dr = devres_alloc_node(devm_arch_io_free_memtype_wc_release, sizeof(*dr), GFP_KERNEL,
dev_to_node(dev));
if (!dr)
return -ENOMEM;
ret = arch_io_reserve_memtype_wc(start, size);
if (ret < 0) {
devres_free(dr);
return ret;
}
dr->start = start;
dr->size = size;
devres_add(dev, dr);
return ret;
}
EXPORT_SYMBOL(devm_arch_io_reserve_memtype_wc);