linux/kernel/trace/trace_stack.c

583 lines
15 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
/*
* Copyright (C) 2008 Steven Rostedt <srostedt@redhat.com>
*
*/
#include <linux/sched/task_stack.h>
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
#include <linux/stacktrace.h>
#include <linux/security.h>
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
#include <linux/kallsyms.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/module.h>
#include <linux/sysctl.h>
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
#include <linux/init.h>
#include <asm/setup.h>
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
#include "trace.h"
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
#define STACK_TRACE_ENTRIES 500
static unsigned long stack_dump_trace[STACK_TRACE_ENTRIES];
static unsigned stack_trace_index[STACK_TRACE_ENTRIES];
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
static unsigned int stack_trace_nr_entries;
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
static unsigned long stack_trace_max_size;
static arch_spinlock_t stack_trace_max_lock =
(arch_spinlock_t)__ARCH_SPIN_LOCK_UNLOCKED;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
DEFINE_PER_CPU(int, disable_stack_tracer);
static DEFINE_MUTEX(stack_sysctl_mutex);
int stack_tracer_enabled;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
static void print_max_stack(void)
tracing: Print max callstack on stacktrace bug While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02 04:33:12 +00:00
{
long i;
int size;
pr_emerg(" Depth Size Location (%d entries)\n"
" ----- ---- --------\n",
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
stack_trace_nr_entries);
tracing: Print max callstack on stacktrace bug While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02 04:33:12 +00:00
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
for (i = 0; i < stack_trace_nr_entries; i++) {
if (i + 1 == stack_trace_nr_entries)
size = stack_trace_index[i];
tracing: Print max callstack on stacktrace bug While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02 04:33:12 +00:00
else
size = stack_trace_index[i] - stack_trace_index[i+1];
tracing: Print max callstack on stacktrace bug While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02 04:33:12 +00:00
pr_emerg("%3ld) %8d %5d %pS\n", i, stack_trace_index[i],
tracing: Print max callstack on stacktrace bug While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02 04:33:12 +00:00
size, (void *)stack_dump_trace[i]);
}
}
/*
* The stack tracer looks for a maximum stack at each call from a function. It
* registers a callback from ftrace, and in that callback it examines the stack
* size. It determines the stack size from the variable passed in, which is the
* address of a local variable in the stack_trace_call() callback function.
* The stack size is calculated by the address of the local variable to the top
* of the current stack. If that size is smaller than the currently saved max
* stack size, nothing more is done.
*
* If the size of the stack is greater than the maximum recorded size, then the
* following algorithm takes place.
*
* For architectures (like x86) that store the function's return address before
* saving the function's local variables, the stack will look something like
* this:
*
* [ top of stack ]
* 0: sys call entry frame
* 10: return addr to entry code
* 11: start of sys_foo frame
* 20: return addr to sys_foo
* 21: start of kernel_func_bar frame
* 30: return addr to kernel_func_bar
* 31: [ do trace stack here ]
*
* The save_stack_trace() is called returning all the functions it finds in the
* current stack. Which would be (from the bottom of the stack to the top):
*
* return addr to kernel_func_bar
* return addr to sys_foo
* return addr to entry code
*
* Now to figure out how much each of these functions' local variable size is,
* a search of the stack is made to find these values. When a match is made, it
* is added to the stack_dump_trace[] array. The offset into the stack is saved
* in the stack_trace_index[] array. The above example would show:
*
* stack_dump_trace[] | stack_trace_index[]
* ------------------ + -------------------
* return addr to kernel_func_bar | 30
* return addr to sys_foo | 20
* return addr to entry | 10
*
* The print_max_stack() function above, uses these values to print the size of
* each function's portion of the stack.
*
* for (i = 0; i < nr_entries; i++) {
* size = i == nr_entries - 1 ? stack_trace_index[i] :
* stack_trace_index[i] - stack_trace_index[i+1]
* print "%d %d %d %s\n", i, stack_trace_index[i], size, stack_dump_trace[i]);
* }
*
* The above shows
*
* depth size location
* ----- ---- --------
* 0 30 10 kernel_func_bar
* 1 20 10 sys_foo
* 2 10 10 entry code
*
* Now for architectures that might save the return address after the functions
* local variables (saving the link register before calling nested functions),
* this will cause the stack to look a little different:
*
* [ top of stack ]
* 0: sys call entry frame
* 10: start of sys_foo_frame
* 19: return addr to entry code << lr saved before calling kernel_func_bar
* 20: start of kernel_func_bar frame
* 29: return addr to sys_foo_frame << lr saved before calling next function
* 30: [ do trace stack here ]
*
* Although the functions returned by save_stack_trace() may be the same, the
* placement in the stack will be different. Using the same algorithm as above
* would yield:
*
* stack_dump_trace[] | stack_trace_index[]
* ------------------ + -------------------
* return addr to kernel_func_bar | 30
* return addr to sys_foo | 29
* return addr to entry | 19
*
* Where the mapping is off by one:
*
* kernel_func_bar stack frame size is 29 - 19 not 30 - 29!
*
* To fix this, if the architecture sets ARCH_RET_ADDR_AFTER_LOCAL_VARS the
* values in stack_trace_index[] are shifted by one to and the number of
* stack trace entries is decremented by one.
*
* stack_dump_trace[] | stack_trace_index[]
* ------------------ + -------------------
* return addr to kernel_func_bar | 29
* return addr to sys_foo | 19
*
* Although the entry function is not displayed, the first function (sys_foo)
* will still include the stack size of it.
*/
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
static void check_stack(unsigned long ip, unsigned long *stack)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
{
tracing: Print max callstack on stacktrace bug While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02 04:33:12 +00:00
unsigned long this_size, flags; unsigned long *p, *top, *start;
static int tracer_frame;
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-23 21:07:29 +00:00
int frame_size = READ_ONCE(tracer_frame);
int i, x;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
this_size = ((unsigned long)stack) & (THREAD_SIZE-1);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
this_size = THREAD_SIZE - this_size;
/* Remove the frame of the tracer */
this_size -= frame_size;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
if (this_size <= stack_trace_max_size)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
return;
/* we do not handle interrupt stacks yet */
if (!object_is_on_stack(stack))
return;
/* Can't do this from NMI context (can cause deadlocks) */
if (in_nmi())
return;
local_irq_save(flags);
arch_spin_lock(&stack_trace_max_lock);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
/* In case another CPU set the tracer_frame on us */
if (unlikely(!frame_size))
this_size -= tracer_frame;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
/* a race could have already updated it */
if (this_size <= stack_trace_max_size)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
goto out;
stack_trace_max_size = this_size;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
stack_trace_nr_entries = stack_trace_save(stack_dump_trace,
ARRAY_SIZE(stack_dump_trace) - 1,
0);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
/* Skip over the overhead of the stack tracer itself */
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
for (i = 0; i < stack_trace_nr_entries; i++) {
if (stack_dump_trace[i] == ip)
break;
}
tracing: Fix stack tracer with fentry use When gcc 4.6 on x86 is used, the function tracer will use the new option -mfentry which does a call to "fentry" at every function instead of "mcount". The significance of this is that fentry is called as the first operation of the function instead of the mcount usage of being called after the stack. This causes the stack tracer to show some bogus results for the size of the last function traced, as well as showing "ftrace_call" instead of the function. This is due to the stack frame not being set up by the function that is about to be traced. # cat stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 4824 216 ftrace_call+0x5/0x2f 1) 4608 112 ____cache_alloc+0xb7/0x22d 2) 4496 80 kmem_cache_alloc+0x63/0x12f The 216 size for ftrace_call includes both the ftrace_call stack (which includes the saving of registers it does), as well as the stack size of the parent. To fix this, if CC_USING_FENTRY is defined, then the stack_tracer will reserve the first item in stack_dump_trace[] array when calling save_stack_trace(), and it will fill it in with the parent ip. Then the code will look for the parent pointer on the stack and give the real size of the parent's stack pointer: # cat stack_trace Depth Size Location (14 entries) ----- ---- -------- 0) 2640 48 update_group_power+0x26/0x187 1) 2592 224 update_sd_lb_stats+0x2a5/0x4ac 2) 2368 160 find_busiest_group+0x31/0x1f1 3) 2208 256 load_balance+0xd9/0x662 I'm Cc'ing stable, although it's not urgent, as it only shows bogus size for item #0, the rest of the trace is legit. It should still be corrected in previous stable releases. Cc: stable@vger.kernel.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-03-14 01:25:35 +00:00
/*
* Some archs may not have the passed in ip in the dump.
* If that happens, we need to show everything.
*/
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
if (i == stack_trace_nr_entries)
i = 0;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
/*
* Now find where in the stack these are.
*/
x = 0;
start = stack;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
top = (unsigned long *)
(((unsigned long)start & ~(THREAD_SIZE-1)) + THREAD_SIZE);
/*
* Loop through all the entries. One of the entries may
* for some reason be missed on the stack, so we may
* have to account for them. If they are all there, this
* loop will only happen once. This code only takes place
* on a new max, so it is far from a fast path.
*/
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
while (i < stack_trace_nr_entries) {
int found = 0;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
stack_trace_index[x] = this_size;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
p = start;
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
for (; p < top && i < stack_trace_nr_entries; p++) {
tracing, kasan: Silence Kasan warning in check_stack of stack_tracer When enabling stack trace via "echo 1 > /proc/sys/kernel/stack_tracer_enabled", the below KASAN warning is triggered: BUG: KASAN: stack-out-of-bounds in check_stack+0x344/0x848 at addr ffffffc0689ebab8 Read of size 8 by task ksoftirqd/4/29 page:ffffffbdc3a27ac0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: kasan: bad access detected CPU: 4 PID: 29 Comm: ksoftirqd/4 Not tainted 4.5.0-rc1 #129 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: [<ffffffc000091300>] dump_backtrace+0x0/0x3a0 [<ffffffc0000916c4>] show_stack+0x24/0x30 [<ffffffc0009bbd78>] dump_stack+0xd8/0x168 [<ffffffc000420bb0>] kasan_report_error+0x6a0/0x920 [<ffffffc000421688>] kasan_report+0x70/0xb8 [<ffffffc00041f7f0>] __asan_load8+0x60/0x78 [<ffffffc0002e05c4>] check_stack+0x344/0x848 [<ffffffc0002e0c8c>] stack_trace_call+0x1c4/0x370 [<ffffffc0002af558>] ftrace_ops_no_ops+0x2c0/0x590 [<ffffffc00009f25c>] ftrace_graph_call+0x0/0x14 [<ffffffc0000881bc>] fpsimd_thread_switch+0x24/0x1e8 [<ffffffc000089864>] __switch_to+0x34/0x218 [<ffffffc0011e089c>] __schedule+0x3ac/0x15b8 [<ffffffc0011e1f6c>] schedule+0x5c/0x178 [<ffffffc0001632a8>] smpboot_thread_fn+0x350/0x960 [<ffffffc00015b518>] kthread+0x1d8/0x2b0 [<ffffffc0000874d0>] ret_from_fork+0x10/0x40 Memory state around the buggy address: ffffffc0689eb980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 f4 f4 f4 ffffffc0689eba00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffc0689eba80: 00 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00 ^ ffffffc0689ebb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc0689ebb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 The stacker tracer traverses the whole kernel stack when saving the max stack trace. It may touch the stack red zones to cause the warning. So, just disable the instrumentation to silence the warning. Link: http://lkml.kernel.org/r/1455309960-18930-1-git-send-email-yang.shi@linaro.org Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-02-12 20:46:00 +00:00
/*
* The READ_ONCE_NOCHECK is used to let KASAN know that
* this is not a stack-out-of-bounds error.
*/
if ((READ_ONCE_NOCHECK(*p)) == stack_dump_trace[i]) {
stack_dump_trace[x] = stack_dump_trace[i++];
this_size = stack_trace_index[x++] =
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
(top - p) * sizeof(unsigned long);
found = 1;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
/* Start the search from here */
start = p + 1;
/*
* We do not want to show the overhead
* of the stack tracer stack in the
* max stack. If we haven't figured
* out what that is, then figure it out
* now.
*/
if (unlikely(!tracer_frame)) {
tracer_frame = (p - stack) *
sizeof(unsigned long);
stack_trace_max_size -= tracer_frame;
}
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
}
}
if (!found)
i++;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
}
#ifdef ARCH_FTRACE_SHIFT_STACK_TRACER
/*
* Some archs will store the link register before calling
* nested functions. This means the saved return address
* comes after the local storage, and we need to shift
* for that.
*/
if (x > 1) {
memmove(&stack_trace_index[0], &stack_trace_index[1],
sizeof(stack_trace_index[0]) * (x - 1));
x--;
}
#endif
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
stack_trace_nr_entries = x;
if (task_stack_end_corrupted(current)) {
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
print_max_stack();
tracing: Print max callstack on stacktrace bug While I played with my own feature(ex, something on the way to reclaim), the kernel would easily oops. I guessed that the reason had to do with stack overflow and wanted to prove it. I discovered the stack tracer which proved to be very useful for me but the kernel would oops before my user program gather the information via "watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any message from that. What I needed was to have the stack tracer emit the kernel stack usage before it does the oops so I could find what was hogging the stack. This patch shows the callstack of max stack usage right before an oops so we can find a culprit. So, the result is as follows. [ 1116.522206] init: lightdm main process (1246) terminated with status 1 [ 1119.922916] init: failsafe-x main process (1272) terminated with status 1 [ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left [ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left [ 7174.467392] Depth Size Location (47 entries) [ 7174.467392] ----- ---- -------- [ 7174.467785] 0) 7248 256 get_page_from_freelist+0xa7/0x920 [ 7174.468506] 1) 6992 352 __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469224] 2) 6640 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 3) 6632 168 new_slab+0x2c5/0x370 [ 7174.469413] 4) 6464 8 __slab_alloc+0x3a9/0x501 [ 7174.469413] 5) 6456 80 __kmalloc+0x1cb/0x200 [ 7174.469413] 6) 6376 376 vring_add_indirect+0x36/0x200 [ 7174.469413] 7) 6000 144 virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] 8) 5856 288 __virtblk_add_req+0xda/0x1b0 [ 7174.469413] 9) 5568 96 virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] 10) 5472 128 __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] 11) 5344 16 blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] 12) 5328 96 blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] 13) 5232 112 blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] 14) 5120 112 blk_flush_plug_list+0xc7/0x220 [ 7174.469413] 15) 5008 64 io_schedule_timeout+0x88/0x100 [ 7174.469413] 16) 4944 128 mempool_alloc+0x145/0x170 [ 7174.469413] 17) 4816 96 bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] 18) 4720 48 get_swap_bio+0x30/0x90 [ 7174.469413] 19) 4672 160 __swap_writepage+0x150/0x230 [ 7174.469413] 20) 4512 32 swap_writepage+0x42/0x90 [ 7174.469413] 21) 4480 320 shrink_page_list+0x676/0xa80 [ 7174.469413] 22) 4160 208 shrink_inactive_list+0x262/0x4e0 [ 7174.469413] 23) 3952 304 shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] 24) 3648 80 shrink_zone+0x3f/0x110 [ 7174.469413] 25) 3568 128 do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] 26) 3440 208 try_to_free_pages+0xf7/0x1e0 [ 7174.469413] 27) 3232 352 __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] 28) 2880 8 alloc_pages_current+0x10f/0x1f0 [ 7174.469413] 29) 2872 200 __page_cache_alloc+0x13f/0x160 [ 7174.469413] 30) 2672 80 find_or_create_page+0x4c/0xb0 [ 7174.469413] 31) 2592 80 ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] 32) 2512 176 ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] 33) 2336 128 ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] 34) 2208 256 ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] 35) 1952 160 ext4_map_blocks+0x325/0x530 [ 7174.469413] 36) 1792 384 ext4_writepages+0x6d1/0xce0 [ 7174.469413] 37) 1408 16 do_writepages+0x23/0x40 [ 7174.469413] 38) 1392 96 __writeback_single_inode+0x45/0x2e0 [ 7174.469413] 39) 1296 176 writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] 40) 1120 80 __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] 41) 1040 160 wb_writeback+0x29b/0x350 [ 7174.469413] 42) 880 208 bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] 43) 672 144 process_one_work+0x1d2/0x570 [ 7174.469413] 44) 528 112 worker_thread+0x116/0x370 [ 7174.469413] 45) 416 240 kthread+0xf3/0x110 [ 7174.469413] 46) 176 176 ret_from_fork+0x7c/0xb0 [ 7174.469413] ------------[ cut here ]------------ [ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174! [ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 7174.469413] Dumping ftrace buffer: [ 7174.469413] (ftrace buffer empty) [ 7174.469413] Modules linked in: [ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212 [ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0) [ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000 [ 7174.469413] RIP: 0010:[<ffffffff8112336e>] [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP: 0000:ffff880029518290 EFLAGS: 00010046 [ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000 [ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159 [ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000 [ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc [ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8 [ 7174.469413] FS: 0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000 [ 7174.469413] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0 [ 7174.469413] Stack: [ 7174.469413] 0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50 [ 7174.469413] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 7174.469413] 0000000000000002 ffff880034170000 ffff880034171028 0000000000000000 [ 7174.469413] Call Trace: [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff816eee3f>] ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff810a23fa>] ? __bfs+0x11a/0x270 [ 7174.469413] [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70 [ 7174.469413] [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920 [ 7174.469413] [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20 [ 7174.469413] [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff81199cd5>] new_slab+0x2c5/0x370 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff816db002>] __slab_alloc+0x3a9/0x501 [ 7174.469413] [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200 [ 7174.469413] [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200 [ 7174.469413] [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200 [ 7174.469413] [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320 [ 7174.469413] [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0 [ 7174.469413] [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0 [ 7174.469413] [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440 [ 7174.469413] [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40 [ 7174.469413] [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160 [ 7174.469413] [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140 [ 7174.469413] [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220 [ 7174.469413] [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70 [ 7174.469413] [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100 [ 7174.469413] [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100 [ 7174.469413] [<ffffffff81149415>] mempool_alloc+0x145/0x170 [ 7174.469413] [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60 [ 7174.469413] [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184110>] get_swap_bio+0x30/0x90 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184660>] __swap_writepage+0x150/0x230 [ 7174.469413] [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0 [ 7174.469413] [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0 [ 7174.469413] [<ffffffff81184515>] ? __swap_writepage+0x5/0x230 [ 7174.469413] [<ffffffff81184782>] swap_writepage+0x42/0x90 [ 7174.469413] [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0 [ 7174.469413] [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0 [ 7174.469413] [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0 [ 7174.469413] [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0 [ 7174.469413] [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20 [ 7174.469413] [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0 [ 7174.469413] [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160 [ 7174.469413] [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0 [ 7174.469413] [<ffffffff811463e5>] ? find_get_page+0x5/0x130 [ 7174.469413] [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370 [ 7174.469413] [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460 [ 7174.469413] [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360 [ 7174.469413] [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f [ 7174.469413] [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0 [ 7174.469413] [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010 [ 7174.469413] [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530 [ 7174.469413] [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0 [ 7174.469413] [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330 [ 7174.469413] [<ffffffff811539b3>] do_writepages+0x23/0x40 [ 7174.469413] [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0 [ 7174.469413] [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500 [ 7174.469413] [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0 [ 7174.469413] [<ffffffff811d40bb>] wb_writeback+0x29b/0x350 [ 7174.469413] [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0 [ 7174.469413] [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81070672>] process_one_work+0x1d2/0x570 [ 7174.469413] [<ffffffff81070610>] ? process_one_work+0x170/0x570 [ 7174.469413] [<ffffffff81071bb6>] worker_thread+0x116/0x370 [ 7174.469413] [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0 [ 7174.469413] [<ffffffff81078e53>] kthread+0xf3/0x110 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0 [ 7174.469413] [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150 [ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01 [ 7174.469413] RIP [<ffffffff8112336e>] stack_trace_call+0x2de/0x340 [ 7174.469413] RSP <ffff880029518290> [ 7174.469413] ---[ end trace c97d325b36b718f3 ]--- Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-02 04:33:12 +00:00
BUG();
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
out:
arch_spin_unlock(&stack_trace_max_lock);
local_irq_restore(flags);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
}
/* Some archs may not define MCOUNT_INSN_SIZE */
#ifndef MCOUNT_INSN_SIZE
# define MCOUNT_INSN_SIZE 0
#endif
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
static void
stack_trace_call(unsigned long ip, unsigned long parent_ip,
struct ftrace_ops *op, struct ftrace_regs *fregs)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
{
unsigned long stack;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 13:36:50 +00:00
preempt_disable_notrace();
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
/* no atomic needed, we only modify this variable by this cpu */
__this_cpu_inc(disable_stack_tracer);
if (__this_cpu_read(disable_stack_tracer) != 1)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
goto out;
/* If rcu is not watching, then save stack trace can fail */
if (!rcu_is_watching())
goto out;
ip += MCOUNT_INSN_SIZE;
check_stack(ip, &stack);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
out:
__this_cpu_dec(disable_stack_tracer);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
/* prevent recursion in schedule */
tracing: Remove ftrace_preempt_disable/enable The ftrace_preempt_disable/enable functions were to address a recursive race caused by the function tracer. The function tracer traces all functions which makes it easily susceptible to recursion. One area was preempt_enable(). This would call the scheduler and the schedulre would call the function tracer and loop. (So was it thought). The ftrace_preempt_disable/enable was made to protect against recursion inside the scheduler by storing the NEED_RESCHED flag. If it was set before the ftrace_preempt_disable() it would not call schedule on ftrace_preempt_enable(), thinking that if it was set before then it would have already scheduled unless it was already in the scheduler. This worked fine except in the case of SMP, where another task would set the NEED_RESCHED flag for a task on another CPU, and then kick off an IPI to trigger it. This could cause the NEED_RESCHED to be saved at ftrace_preempt_disable() but the IPI to arrive in the the preempt disabled section. The ftrace_preempt_enable() would not call the scheduler because the flag was already set before entring the section. This bug would cause a missed preemption check and cause lower latencies. Investigating further, I found that the recusion caused by the function tracer was not due to schedule(), but due to preempt_schedule(). Now that preempt_schedule is completely annotated with notrace, the recusion no longer is an issue. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-06-03 13:36:50 +00:00
preempt_enable_notrace();
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
}
static struct ftrace_ops trace_ops __read_mostly =
{
.func = stack_trace_call,
};
static ssize_t
stack_max_size_read(struct file *filp, char __user *ubuf,
size_t count, loff_t *ppos)
{
unsigned long *ptr = filp->private_data;
char buf[64];
int r;
r = snprintf(buf, sizeof(buf), "%ld\n", *ptr);
if (r > sizeof(buf))
r = sizeof(buf);
return simple_read_from_buffer(ubuf, count, ppos, buf, r);
}
static ssize_t
stack_max_size_write(struct file *filp, const char __user *ubuf,
size_t count, loff_t *ppos)
{
long *ptr = filp->private_data;
unsigned long val, flags;
int ret;
ret = kstrtoul_from_user(ubuf, count, 10, &val);
if (ret)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
return ret;
local_irq_save(flags);
/*
* In case we trace inside arch_spin_lock() or after (NMI),
* we will cause circular lock, so we also need to increase
* the percpu disable_stack_tracer here.
*/
__this_cpu_inc(disable_stack_tracer);
arch_spin_lock(&stack_trace_max_lock);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
*ptr = val;
arch_spin_unlock(&stack_trace_max_lock);
__this_cpu_dec(disable_stack_tracer);
local_irq_restore(flags);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
return count;
}
static const struct file_operations stack_max_size_fops = {
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
.open = tracing_open_generic,
.read = stack_max_size_read,
.write = stack_max_size_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.llseek = default_llseek,
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
};
static void *
__next(struct seq_file *m, loff_t *pos)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
{
long n = *pos - 1;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
if (n >= stack_trace_nr_entries)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
return NULL;
m->private = (void *)n;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
return &m->private;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
{
(*pos)++;
return __next(m, pos);
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
static void *t_start(struct seq_file *m, loff_t *pos)
{
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
local_irq_disable();
__this_cpu_inc(disable_stack_tracer);
arch_spin_lock(&stack_trace_max_lock);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
if (*pos == 0)
return SEQ_START_TOKEN;
return __next(m, pos);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
}
static void t_stop(struct seq_file *m, void *p)
{
arch_spin_unlock(&stack_trace_max_lock);
__this_cpu_dec(disable_stack_tracer);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
local_irq_enable();
}
static void trace_lookup_stack(struct seq_file *m, long i)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
{
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
unsigned long addr = stack_dump_trace[i];
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
seq_printf(m, "%pS\n", (void *)addr);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
}
static void print_disabled(struct seq_file *m)
{
seq_puts(m, "#\n"
"# Stack tracer disabled\n"
"#\n"
"# To enable the stack tracer, either add 'stacktrace' to the\n"
"# kernel command line\n"
"# or 'echo 1 > /proc/sys/kernel/stack_tracer_enabled'\n"
"#\n");
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
static int t_show(struct seq_file *m, void *v)
{
long i;
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
int size;
if (v == SEQ_START_TOKEN) {
seq_printf(m, " Depth Size Location"
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
" (%d entries)\n"
" ----- ---- --------\n",
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
stack_trace_nr_entries);
if (!stack_tracer_enabled && !stack_trace_max_size)
print_disabled(m);
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
return 0;
}
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
i = *(long *)v;
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
if (i >= stack_trace_nr_entries)
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
return 0;
tracing: Remove the last struct stack_trace usage Simplify the stack retrieval code by using the storage array based interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094803.340000461@linutronix.de
2019-04-25 09:45:17 +00:00
if (i + 1 == stack_trace_nr_entries)
size = stack_trace_index[i];
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
else
size = stack_trace_index[i] - stack_trace_index[i+1];
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
seq_printf(m, "%3ld) %8d %5d ", i, stack_trace_index[i], size);
ftrace: stack trace add indexes This patch adds indexes into the stack that the functions in the stack dump were found at. As an added bonus, I also added a diff to show which function is the most notorious consumer of the stack. The output now looks like this: # cat /debug/tracing/stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 2476 212 blk_recount_segments+0x39/0x59 1) 2264 12 bio_phys_segments+0x16/0x1d 2) 2252 20 blk_rq_bio_prep+0x23/0xaf 3) 2232 12 init_request_from_bio+0x74/0x77 4) 2220 56 __make_request+0x294/0x331 5) 2164 136 generic_make_request+0x34f/0x37d 6) 2028 56 submit_bio+0xe7/0xef 7) 1972 28 submit_bh+0xd1/0xf0 8) 1944 112 block_read_full_page+0x299/0x2a9 9) 1832 8 blkdev_readpage+0x14/0x16 10) 1824 28 read_cache_page_async+0x7e/0x109 11) 1796 16 read_cache_page+0x11/0x49 12) 1780 32 read_dev_sector+0x3c/0x72 13) 1748 48 read_lba+0x4d/0xaa 14) 1700 168 efi_partition+0x85/0x61b 15) 1532 72 rescan_partitions+0x10e/0x266 16) 1460 40 do_open+0x1c7/0x24e 17) 1420 292 __blkdev_get+0x79/0x84 18) 1128 12 blkdev_get+0x12/0x14 19) 1116 20 register_disk+0xd1/0x11e 20) 1096 28 add_disk+0x34/0x90 21) 1068 52 sd_probe+0x2b1/0x366 22) 1016 20 driver_probe_device+0xa5/0x120 23) 996 8 __device_attach+0xd/0xf 24) 988 32 bus_for_each_drv+0x3e/0x68 25) 956 24 device_attach+0x56/0x6c 26) 932 16 bus_attach_device+0x26/0x4d 27) 916 64 device_add+0x380/0x4b4 28) 852 28 scsi_sysfs_add_sdev+0xa1/0x1c9 29) 824 160 scsi_probe_and_add_lun+0x919/0xa2a 30) 664 36 __scsi_add_device+0x88/0xae 31) 628 44 ata_scsi_scan_host+0x9e/0x21c 32) 584 28 ata_host_register+0x1cb/0x1db 33) 556 24 ata_host_activate+0x98/0xb5 34) 532 192 ahci_init_one+0x9bd/0x9e9 35) 340 20 pci_device_probe+0x3e/0x5e 36) 320 20 driver_probe_device+0xa5/0x120 37) 300 20 __driver_attach+0x3f/0x5e 38) 280 36 bus_for_each_dev+0x40/0x62 39) 244 12 driver_attach+0x19/0x1b 40) 232 28 bus_add_driver+0x9c/0x1af 41) 204 28 driver_register+0x76/0xd2 42) 176 20 __pci_register_driver+0x44/0x71 43) 156 8 ahci_init+0x14/0x16 44) 148 100 _stext+0x42/0x122 45) 48 20 kernel_init+0x175/0x1dc 46) 28 28 kernel_thread_helper+0x7/0x10 The first column is simply an index starting from the inner most function and counting down to the outer most. The next column is the location that the function was found on the stack. The next column is the size of the stack for that function. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-29 20:51:43 +00:00
trace_lookup_stack(m, i);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
return 0;
}
static const struct seq_operations stack_trace_seq_ops = {
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
.start = t_start,
.next = t_next,
.stop = t_stop,
.show = t_show,
};
static int stack_trace_open(struct inode *inode, struct file *file)
{
int ret;
ret = security_locked_down(LOCKDOWN_TRACEFS);
if (ret)
return ret;
return seq_open(file, &stack_trace_seq_ops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
}
static const struct file_operations stack_trace_fops = {
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
.open = stack_trace_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
};
#ifdef CONFIG_DYNAMIC_FTRACE
static int
stack_trace_filter_open(struct inode *inode, struct file *file)
{
struct ftrace_ops *ops = inode->i_private;
/* Checks for tracefs lockdown */
return ftrace_regex_open(ops, FTRACE_ITER_FILTER,
inode, file);
}
static const struct file_operations stack_trace_filter_fops = {
.open = stack_trace_filter_open,
.read = seq_read,
.write = ftrace_filter_write,
.llseek = tracing_lseek,
.release = ftrace_regex_release,
};
#endif /* CONFIG_DYNAMIC_FTRACE */
int
stack_trace_sysctl(struct ctl_table *table, int write, void *buffer,
size_t *lenp, loff_t *ppos)
{
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
int was_enabled;
int ret;
mutex_lock(&stack_sysctl_mutex);
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
was_enabled = !!stack_tracer_enabled;
ret = proc_dointvec(table, write, buffer, lenp, ppos);
tracing: Cleanup stack trace code - Remove the extra array member of stack_dump_trace[] along with the ARRAY_SIZE - 1 initialization for struct stack_trace :: max_entries. Both are historical leftovers of no value. The stack tracer never exceeds the array and there is no extra storage requirement either. - Make variables which are only used in trace_stack.c static. - Simplify the enable/disable logic. - Rename stack_trace_print() as it's using the stack_trace_ namespace. Free the name up for stack trace related functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: linux-mm@kvack.org Cc: David Rientjes <rientjes@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.230654524@linutronix.de
2019-04-25 09:44:54 +00:00
if (ret || !write || (was_enabled == !!stack_tracer_enabled))
goto out;
if (stack_tracer_enabled)
register_ftrace_function(&trace_ops);
else
unregister_ftrace_function(&trace_ops);
out:
mutex_unlock(&stack_sysctl_mutex);
return ret;
}
static char stack_trace_filter_buf[COMMAND_LINE_SIZE+1] __initdata;
static __init int enable_stacktrace(char *str)
{
int len;
if ((len = str_has_prefix(str, "_filter=")))
strncpy(stack_trace_filter_buf, str + len, COMMAND_LINE_SIZE);
stack_tracer_enabled = 1;
return 1;
}
__setup("stacktrace", enable_stacktrace);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
static __init int stack_trace_init(void)
{
int ret;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
ret = tracing_init_dentry();
if (ret)
return 0;
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
trace_create_file("stack_max_size", TRACE_MODE_WRITE, NULL,
&stack_trace_max_size, &stack_max_size_fops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
trace_create_file("stack_trace", TRACE_MODE_READ, NULL,
NULL, &stack_trace_fops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
#ifdef CONFIG_DYNAMIC_FTRACE
trace_create_file("stack_trace_filter", TRACE_MODE_WRITE, NULL,
&trace_ops, &stack_trace_filter_fops);
#endif
if (stack_trace_filter_buf[0])
ftrace_set_early_filter(&trace_ops, stack_trace_filter_buf, 1);
if (stack_tracer_enabled)
register_ftrace_function(&trace_ops);
ftrace: add stack tracer This is another tracer using the ftrace infrastructure, that examines at each function call the size of the stack. If the stack use is greater than the previous max it is recorded. You can always see (and set) the max stack size seen. By setting it to zero will start the recording again. The backtrace is also available. For example: # cat /debug/tracing/stack_max_size 1856 # cat /debug/tracing/stack_trace [<c027764d>] stack_trace_call+0x8f/0x101 [<c021b966>] ftrace_call+0x5/0x8 [<c02553cc>] clocksource_get_next+0x12/0x48 [<c02542a5>] update_wall_time+0x538/0x6d1 [<c0245913>] do_timer+0x23/0xb0 [<c0257657>] tick_do_update_jiffies64+0xd9/0xf1 [<c02576b9>] tick_sched_timer+0x4a/0xad [<c0250fe6>] __run_hrtimer+0x3e/0x75 [<c02518ed>] hrtimer_interrupt+0xf1/0x154 [<c022c870>] smp_apic_timer_interrupt+0x71/0x84 [<c021b7e9>] apic_timer_interrupt+0x2d/0x34 [<c0238597>] finish_task_switch+0x29/0xa0 [<c05abd13>] schedule+0x765/0x7be [<c05abfca>] schedule_timeout+0x1b/0x90 [<c05ab4d4>] wait_for_common+0xab/0x101 [<c05ab5ac>] wait_for_completion+0x12/0x14 [<c033cfc3>] blk_execute_rq+0x84/0x99 [<c0402470>] scsi_execute+0xc2/0x105 [<c040250a>] scsi_execute_req+0x57/0x7f [<c043afe0>] sr_test_unit_ready+0x3e/0x97 [<c043bbd6>] sr_media_change+0x43/0x205 [<c046b59f>] media_changed+0x48/0x77 [<c046b5ff>] cdrom_media_changed+0x31/0x37 [<c043b091>] sr_block_media_changed+0x16/0x18 [<c02b9e69>] check_disk_change+0x1b/0x63 [<c046f4c3>] cdrom_open+0x7a1/0x806 [<c043b148>] sr_block_open+0x78/0x8d [<c02ba4c0>] do_open+0x90/0x257 [<c02ba869>] blkdev_open+0x2d/0x56 [<c0296a1f>] __dentry_open+0x14d/0x23c [<c0296b32>] nameidata_to_filp+0x24/0x38 [<c02a1c68>] do_filp_open+0x347/0x626 [<c02967ef>] do_sys_open+0x47/0xbc [<c02968b0>] sys_open+0x23/0x2b [<c021aadd>] sysenter_do_call+0x12/0x26 I've tested this on both x86_64 and i386. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-28 03:31:01 +00:00
return 0;
}
device_initcall(stack_trace_init);