linux/include/net/bond_options.h

135 lines
3.8 KiB
C
Raw Normal View History

bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 13:53:16 +00:00
/*
* drivers/net/bond/bond_options.h - bonding options
* Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _NET_BOND_OPTIONS_H
#define _NET_BOND_OPTIONS_H
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 13:53:16 +00:00
#define BOND_OPT_MAX_NAMELEN 32
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
#define BOND_MODE_ALL_EX(x) (~(x))
/* Option flags:
* BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
* BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
* BOND_OPTFLAG_RAWVAL - the option parses the value itself
*/
enum {
BOND_OPTFLAG_NOSLAVES = BIT(0),
BOND_OPTFLAG_IFDOWN = BIT(1),
BOND_OPTFLAG_RAWVAL = BIT(2)
};
/* Value type flags:
* BOND_VALFLAG_DEFAULT - mark the value as default
* BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
*/
enum {
BOND_VALFLAG_DEFAULT = BIT(0),
BOND_VALFLAG_MIN = BIT(1),
BOND_VALFLAG_MAX = BIT(2)
};
/* Option IDs, their bit positions correspond to their IDs */
enum {
BOND_OPT_MODE,
BOND_OPT_PACKETS_PER_SLAVE,
BOND_OPT_XMIT_HASH,
BOND_OPT_ARP_VALIDATE,
BOND_OPT_ARP_ALL_TARGETS,
BOND_OPT_FAIL_OVER_MAC,
BOND_OPT_ARP_INTERVAL,
BOND_OPT_ARP_TARGETS,
BOND_OPT_DOWNDELAY,
BOND_OPT_UPDELAY,
BOND_OPT_LACP_RATE,
BOND_OPT_MINLINKS,
BOND_OPT_AD_SELECT,
BOND_OPT_NUM_PEER_NOTIF,
BOND_OPT_MIIMON,
BOND_OPT_PRIMARY,
BOND_OPT_PRIMARY_RESELECT,
BOND_OPT_USE_CARRIER,
BOND_OPT_ACTIVE_SLAVE,
BOND_OPT_QUEUE_ID,
BOND_OPT_ALL_SLAVES_ACTIVE,
BOND_OPT_RESEND_IGMP,
BOND_OPT_LP_INTERVAL,
BOND_OPT_SLAVES,
BOND_OPT_TLB_DYNAMIC_LB,
BOND_OPT_AD_ACTOR_SYS_PRIO,
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 07:01:56 +00:00
BOND_OPT_AD_ACTOR_SYSTEM,
BOND_OPT_AD_USER_PORT_KEY,
BOND_OPT_NUM_PEER_NOTIF_ALIAS,
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 13:53:16 +00:00
BOND_OPT_LAST
};
/* This structure is used for storing option values and for passing option
* values when changing an option. The logic when used as an arg is as follows:
* - if string != NULL -> parse it, if the opt is RAW type then return it, else
* return the parse result
* - if string == NULL -> parse value
*/
struct bond_opt_value {
char *string;
u64 value;
u32 flags;
};
struct bonding;
struct bond_option {
int id;
const char *name;
const char *desc;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 13:53:16 +00:00
u32 flags;
/* unsuppmodes is used to denote modes in which the option isn't
* supported.
*/
unsigned long unsuppmodes;
/* supported values which this option can have, can be a subset of
* BOND_OPTVAL_RANGE's value range
*/
const struct bond_opt_value *values;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 13:53:16 +00:00
int (*set)(struct bonding *bond, const struct bond_opt_value *val);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 13:53:16 +00:00
};
int __bond_opt_set(struct bonding *bond, unsigned int option,
struct bond_opt_value *val);
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
struct bond_opt_value *val);
const struct bond_option *bond_opt_get(unsigned int option);
const struct bond_option *bond_opt_get_by_name(const char *name);
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 13:53:16 +00:00
/* This helper is used to initialize a bond_opt_value structure for parameter
* passing. There should be either a valid string or value, but not both.
* When value is ULLONG_MAX then string will be used.
*/
static inline void __bond_opt_init(struct bond_opt_value *optval,
char *string, u64 value)
{
memset(optval, 0, sizeof(*optval));
optval->value = ULLONG_MAX;
if (value == ULLONG_MAX)
optval->string = string;
else
optval->value = value;
}
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
void bond_option_arp_ip_targets_clear(struct bonding *bond);
#endif /* _NET_BOND_OPTIONS_H */