linux/mm/rmap.c

2609 lines
75 KiB
C
Raw Normal View History

/*
* mm/rmap.c - physical to virtual reverse mappings
*
* Copyright 2001, Rik van Riel <riel@conectiva.com.br>
* Released under the General Public License (GPL).
*
* Simple, low overhead reverse mapping scheme.
* Please try to keep this thing as modular as possible.
*
* Provides methods for unmapping each kind of mapped page:
* the anon methods track anonymous pages, and
* the file methods track pages belonging to an inode.
*
* Original design by Rik van Riel <riel@conectiva.com.br> 2001
* File methods by Dave McCracken <dmccr@us.ibm.com> 2003, 2004
* Anonymous methods by Andrea Arcangeli <andrea@suse.de> 2004
* Contributions by Hugh Dickins 2003, 2004
*/
/*
* Lock ordering in mm:
*
* inode->i_rwsem (while writing or truncating, not reading or faulting)
* mm->mmap_lock
* mapping->invalidate_lock (in filemap_fault)
hugetlbfs: revert use i_mmap_rwsem for more pmd sharing synchronization Commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") added code to take i_mmap_rwsem in read mode for the duration of fault processing. However, this has been shown to cause performance/scaling issues. Revert the code and go back to only taking the semaphore in huge_pmd_share during the fault path. Keep the code that takes i_mmap_rwsem in write mode before calling try_to_unmap as this is required if huge_pmd_unshare is called. NOTE: Reverting this code does expose the following race condition. Faulting thread Unsharing thread ... ... ptep = huge_pte_offset() or ptep = huge_pte_alloc() ... i_mmap_lock_write lock page table ptep invalid <------------------------ huge_pmd_unshare() Could be in a previously unlock_page_table sharing process or worse i_mmap_unlock_write ... ptl = huge_pte_lock(ptep) get/update pte set_pte_at(pte, ptep) It is unknown if the above race was ever experienced by a user. It was discovered via code inspection when initially addressed. In subsequent patches, a new synchronization mechanism will be added to coordinate pmd sharing and eliminate this race. Link: https://lkml.kernel.org/r/20220914221810.95771-3-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:03 +00:00
* page->flags PG_locked (lock_page)
hugetlb: add vma based lock for pmd sharing Allocate a new hugetlb_vma_lock structure and hang off vm_private_data for synchronization use by vmas that could be involved in pmd sharing. This data structure contains a rw semaphore that is the primary tool used for synchronization. This new structure is ref counted, so that it can exist when NOT attached to a vma. This is only helpful in resolving lock ordering issues where code may need to obtain the vma_lock while there are no guarantees the vma may go away. By obtaining a ref on the structure, it can be guaranteed that at least the rw semaphore will not go away. Only add infrastructure for the new lock here. Actual use will be added in subsequent patches. [mike.kravetz@oracle.com: fix build issue for missing hugetlb_vma_lock_release] Link: https://lkml.kernel.org/r/YyNUtA1vRASOE4+M@monkey Link: https://lkml.kernel.org/r/20220914221810.95771-7-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:07 +00:00
* hugetlbfs_i_mmap_rwsem_key (in huge_pmd_share, see hugetlbfs below)
* vma_start_write
* mapping->i_mmap_rwsem
* anon_vma->rwsem
* mm->page_table_lock or pte_lock
* swap_lock (in swap_duplicate, swap_info_get)
* mmlist_lock (in mmput, drain_mmlist and others)
* mapping->private_lock (in block_dirty_folio)
* folio_lock_memcg move_lock (in block_dirty_folio)
* i_pages lock (widely used)
* lruvec->lru_lock (in folio_lruvec_lock_irq)
* inode->i_lock (in set_page_dirty's __mark_inode_dirty)
* bdi.wb->list_lock (in set_page_dirty's __mark_inode_dirty)
* sb_lock (within inode_lock in fs/fs-writeback.c)
* i_pages lock (widely used, in set_page_dirty,
* in arch-dependent flush_dcache_mmap_lock,
* within bdi.wb->list_lock in __sync_single_inode)
HWPOISON: The high level memory error handler in the VM v7 Add the high level memory handler that poisons pages that got corrupted by hardware (typically by a two bit flip in a DIMM or a cache) on the Linux level. The goal is to prevent everyone from accessing these pages in the future. This done at the VM level by marking a page hwpoisoned and doing the appropriate action based on the type of page it is. The code that does this is portable and lives in mm/memory-failure.c To quote the overview comment: High level machine check handler. Handles pages reported by the hardware as being corrupted usually due to a 2bit ECC memory or cache failure. This focuses on pages detected as corrupted in the background. When the current CPU tries to consume corruption the currently running process can just be killed directly instead. This implies that if the error cannot be handled for some reason it's safe to just ignore it because no corruption has been consumed yet. Instead when that happens another machine check will happen. Handles page cache pages in various states. The tricky part here is that we can access any page asynchronous to other VM users, because memory failures could happen anytime and anywhere, possibly violating some of their assumptions. This is why this code has to be extremely careful. Generally it tries to use normal locking rules, as in get the standard locks, even if that means the error handling takes potentially a long time. Some of the operations here are somewhat inefficient and have non linear algorithmic complexity, because the data structures have not been optimized for this case. This is in particular the case for the mapping from a vma to a process. Since this case is expected to be rare we hope we can get away with this. There are in principle two strategies to kill processes on poison: - just unmap the data and wait for an actual reference before killing - kill as soon as corruption is detected. Both have advantages and disadvantages and should be used in different situations. Right now both are implemented and can be switched with a new sysctl vm.memory_failure_early_kill The default is early kill. The patch does some rmap data structure walking on its own to collect processes to kill. This is unusual because normally all rmap data structure knowledge is in rmap.c only. I put it here for now to keep everything together and rmap knowledge has been seeping out anyways Includes contributions from Johannes Weiner, Chris Mason, Fengguang Wu, Nick Piggin (who did a lot of great work) and others. Cc: npiggin@suse.de Cc: riel@redhat.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
2009-09-16 09:50:15 +00:00
*
* anon_vma->rwsem,mapping->i_mmap_rwsem (memory_failure, collect_procs_anon)
* ->tasklist_lock
HWPOISON: The high level memory error handler in the VM v7 Add the high level memory handler that poisons pages that got corrupted by hardware (typically by a two bit flip in a DIMM or a cache) on the Linux level. The goal is to prevent everyone from accessing these pages in the future. This done at the VM level by marking a page hwpoisoned and doing the appropriate action based on the type of page it is. The code that does this is portable and lives in mm/memory-failure.c To quote the overview comment: High level machine check handler. Handles pages reported by the hardware as being corrupted usually due to a 2bit ECC memory or cache failure. This focuses on pages detected as corrupted in the background. When the current CPU tries to consume corruption the currently running process can just be killed directly instead. This implies that if the error cannot be handled for some reason it's safe to just ignore it because no corruption has been consumed yet. Instead when that happens another machine check will happen. Handles page cache pages in various states. The tricky part here is that we can access any page asynchronous to other VM users, because memory failures could happen anytime and anywhere, possibly violating some of their assumptions. This is why this code has to be extremely careful. Generally it tries to use normal locking rules, as in get the standard locks, even if that means the error handling takes potentially a long time. Some of the operations here are somewhat inefficient and have non linear algorithmic complexity, because the data structures have not been optimized for this case. This is in particular the case for the mapping from a vma to a process. Since this case is expected to be rare we hope we can get away with this. There are in principle two strategies to kill processes on poison: - just unmap the data and wait for an actual reference before killing - kill as soon as corruption is detected. Both have advantages and disadvantages and should be used in different situations. Right now both are implemented and can be switched with a new sysctl vm.memory_failure_early_kill The default is early kill. The patch does some rmap data structure walking on its own to collect processes to kill. This is unusual because normally all rmap data structure knowledge is in rmap.c only. I put it here for now to keep everything together and rmap knowledge has been seeping out anyways Includes contributions from Johannes Weiner, Chris Mason, Fengguang Wu, Nick Piggin (who did a lot of great work) and others. Cc: npiggin@suse.de Cc: riel@redhat.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
2009-09-16 09:50:15 +00:00
* pte map lock
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization Patch series "hugetlbfs: use i_mmap_rwsem for more synchronization", v2. While discussing the issue with huge_pte_offset [1], I remembered that there were more outstanding hugetlb races. These issues are: 1) For shared pmds, huge PTE pointers returned by huge_pte_alloc can become invalid via a call to huge_pmd_unshare by another thread. 2) hugetlbfs page faults can race with truncation causing invalid global reserve counts and state. A previous attempt was made to use i_mmap_rwsem in this manner as described at [2]. However, those patches were reverted starting with [3] due to locking issues. To effectively use i_mmap_rwsem to address the above issues it needs to be held (in read mode) during page fault processing. However, during fault processing we need to lock the page we will be adding. Lock ordering requires we take page lock before i_mmap_rwsem. Waiting until after taking the page lock is too late in the fault process for the synchronization we want to do. To address this lock ordering issue, the following patches change the lock ordering for hugetlb pages. This is not too invasive as hugetlbfs processing is done separate from core mm in many places. However, I don't really like this idea. Much ugliness is contained in the new routine hugetlb_page_mapping_lock_write() of patch 1. The only other way I can think of to address these issues is by catching all the races. After catching a race, cleanup, backout, retry ... etc, as needed. This can get really ugly, especially for huge page reservations. At one time, I started writing some of the reservation backout code for page faults and it got so ugly and complicated I went down the path of adding synchronization to avoid the races. Any other suggestions would be welcome. [1] https://lore.kernel.org/linux-mm/1582342427-230392-1-git-send-email-longpeng2@huawei.com/ [2] https://lore.kernel.org/linux-mm/20181222223013.22193-1-mike.kravetz@oracle.com/ [3] https://lore.kernel.org/linux-mm/20190103235452.29335-1-mike.kravetz@oracle.com [4] https://lore.kernel.org/linux-mm/1584028670.7365.182.camel@lca.pw/ [5] https://lore.kernel.org/lkml/20200312183142.108df9ac@canb.auug.org.au/ This patch (of 2): While looking at BUGs associated with invalid huge page map counts, it was discovered and observed that a huge pte pointer could become 'invalid' and point to another task's page table. Consider the following: A task takes a page fault on a shared hugetlbfs file and calls huge_pte_alloc to get a ptep. Suppose the returned ptep points to a shared pmd. Now, another task truncates the hugetlbfs file. As part of truncation, it unmaps everyone who has the file mapped. If the range being truncated is covered by a shared pmd, huge_pmd_unshare will be called. For all but the last user of the shared pmd, huge_pmd_unshare will clear the pud pointing to the pmd. If the task in the middle of the page fault is not the last user, the ptep returned by huge_pte_alloc now points to another task's page table or worse. This leads to bad things such as incorrect page map/reference counts or invalid memory references. To fix, expand the use of i_mmap_rwsem as follows: - i_mmap_rwsem is held in read mode whenever huge_pmd_share is called. huge_pmd_share is only called via huge_pte_alloc, so callers of huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers of huge_pte_alloc continue to hold the semaphore until finished with the ptep. - i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is called. One problem with this scheme is that it requires taking i_mmap_rwsem before taking the page lock during page faults. This is not the order specified in the rest of mm code. Handling of hugetlbfs pages is mostly isolated today. Therefore, we use this alternative locking order for PageHuge() pages. mapping->i_mmap_rwsem hugetlb_fault_mutex (hugetlbfs specific page fault mutex) page->flags PG_locked (lock_page) To help with lock ordering issues, hugetlb_page_mapping_lock_write() is introduced to write lock the i_mmap_rwsem associated with a page. In most cases it is easy to get address_space via vma->vm_file->f_mapping. However, in the case of migration or memory errors for anon pages we do not have an associated vma. A new routine _get_hugetlb_page_mapping() will use anon_vma to get address_space in these cases. Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Link: http://lkml.kernel.org/r/20200316205756.146666-2-mike.kravetz@oracle.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 04:11:05 +00:00
*
hugetlb: add vma based lock for pmd sharing Allocate a new hugetlb_vma_lock structure and hang off vm_private_data for synchronization use by vmas that could be involved in pmd sharing. This data structure contains a rw semaphore that is the primary tool used for synchronization. This new structure is ref counted, so that it can exist when NOT attached to a vma. This is only helpful in resolving lock ordering issues where code may need to obtain the vma_lock while there are no guarantees the vma may go away. By obtaining a ref on the structure, it can be guaranteed that at least the rw semaphore will not go away. Only add infrastructure for the new lock here. Actual use will be added in subsequent patches. [mike.kravetz@oracle.com: fix build issue for missing hugetlb_vma_lock_release] Link: https://lkml.kernel.org/r/YyNUtA1vRASOE4+M@monkey Link: https://lkml.kernel.org/r/20220914221810.95771-7-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:07 +00:00
* hugetlbfs PageHuge() take locks in this order:
* hugetlb_fault_mutex (hugetlbfs specific page fault mutex)
* vma_lock (hugetlb specific lock for pmd_sharing)
* mapping->i_mmap_rwsem (also used for hugetlb pmd sharing)
* page->flags PG_locked (lock_page)
*/
#include <linux/mm.h>
#include <linux/sched/mm.h>
#include <linux/sched/task.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/slab.h>
#include <linux/init.h>
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
#include <linux/ksm.h>
#include <linux/rmap.h>
#include <linux/rcupdate.h>
#include <linux/export.h>
Memory controller: memory accounting Add the accounting hooks. The accounting is carried out for RSS and Page Cache (unmapped) pages. There is now a common limit and accounting for both. The RSS accounting is accounted at page_add_*_rmap() and page_remove_rmap() time. Page cache is accounted at add_to_page_cache(), __delete_from_page_cache(). Swap cache is also accounted for. Each page's page_cgroup is protected with the last bit of the page_cgroup pointer, this makes handling of race conditions involving simultaneous mappings of a page easier. A reference count is kept in the page_cgroup to deal with cases where a page might be unmapped from the RSS of all tasks, but still lives in the page cache. Credits go to Vaidyanathan Srinivasan for helping with reference counting work of the page cgroup. Almost all of the page cache accounting code has help from Vaidyanathan Srinivasan. [hugh@veritas.com: fix swapoff breakage] [akpm@linux-foundation.org: fix locking] Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Kirill Korotaev <dev@sw.ru> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: David Rientjes <rientjes@google.com> Cc: <Valdis.Kletnieks@vt.edu> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 08:13:53 +00:00
#include <linux/memcontrol.h>
mmu-notifiers: core With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages. There are secondary MMUs (with secondary sptes and secondary tlbs) too. sptes in the kvm case are shadow pagetables, but when I say spte in mmu-notifier context, I mean "secondary pte". In GRU case there's no actual secondary pte and there's only a secondary tlb because the GRU secondary MMU has no knowledge about sptes and every secondary tlb miss event in the MMU always generates a page fault that has to be resolved by the CPU (this is not the case of KVM where the a secondary tlb miss will walk sptes in hardware and it will refill the secondary tlb transparently to software if the corresponding spte is present). The same way zap_page_range has to invalidate the pte before freeing the page, the spte (and secondary tlb) must also be invalidated before any page is freed and reused. Currently we take a page_count pin on every page mapped by sptes, but that means the pages can't be swapped whenever they're mapped by any spte because they're part of the guest working set. Furthermore a spte unmap event can immediately lead to a page to be freed when the pin is released (so requiring the same complex and relatively slow tlb_gather smp safe logic we have in zap_page_range and that can be avoided completely if the spte unmap event doesn't require an unpin of the page previously mapped in the secondary MMU). The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know when the VM is swapping or freeing or doing anything on the primary MMU so that the secondary MMU code can drop sptes before the pages are freed, avoiding all page pinning and allowing 100% reliable swapping of guest physical address space. Furthermore it avoids the code that teardown the mappings of the secondary MMU, to implement a logic like tlb_gather in zap_page_range that would require many IPI to flush other cpu tlbs, for each fixed number of spte unmapped. To make an example: if what happens on the primary MMU is a protection downgrade (from writeable to wrprotect) the secondary MMU mappings will be invalidated, and the next secondary-mmu-page-fault will call get_user_pages and trigger a do_wp_page through get_user_pages if it called get_user_pages with write=1, and it'll re-establishing an updated spte or secondary-tlb-mapping on the copied page. Or it will setup a readonly spte or readonly tlb mapping if it's a guest-read, if it calls get_user_pages with write=0. This is just an example. This allows to map any page pointed by any pte (and in turn visible in the primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an full MMU with both sptes and secondary-tlb like the shadow-pagetable layer with kvm), or a remote DMA in software like XPMEM (hence needing of schedule in XPMEM code to send the invalidate to the remote node, while no need to schedule in kvm/gru as it's an immediate event like invalidating primary-mmu pte). At least for KVM without this patch it's impossible to swap guests reliably. And having this feature and removing the page pin allows several other optimizations that simplify life considerably. Dependencies: 1) mm_take_all_locks() to register the mmu notifier when the whole VM isn't doing anything with "mm". This allows mmu notifier users to keep track if the VM is in the middle of the invalidate_range_begin/end critical section with an atomic counter incraese in range_begin and decreased in range_end. No secondary MMU page fault is allowed to map any spte or secondary tlb reference, while the VM is in the middle of range_begin/end as any page returned by get_user_pages in that critical section could later immediately be freed without any further ->invalidate_page notification (invalidate_range_begin/end works on ranges and ->invalidate_page isn't called immediately before freeing the page). To stop all page freeing and pagetable overwrites the mmap_sem must be taken in write mode and all other anon_vma/i_mmap locks must be taken too. 2) It'd be a waste to add branches in the VM if nobody could possibly run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if CONFIG_KVM=m/y. In the current kernel kvm won't yet take advantage of mmu notifiers, but this already allows to compile a KVM external module against a kernel with mmu notifiers enabled and from the next pull from kvm.git we'll start using them. And GRU/XPMEM will also be able to continue the development by enabling KVM=m in their config, until they submit all GRU/XPMEM GPLv2 code to the mainline kernel. Then they can also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n). This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM are all =n. The mmu_notifier_register call can fail because mm_take_all_locks may be interrupted by a signal and return -EINTR. Because mmu_notifier_reigster is used when a driver startup, a failure can be gracefully handled. Here an example of the change applied to kvm to register the mmu notifiers. Usually when a driver startups other allocations are required anyway and -ENOMEM failure paths exists already. struct kvm *kvm_arch_create_vm(void) { struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL); + int err; if (!kvm) return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&kvm->arch.active_mmu_pages); + kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm); + if (err) { + kfree(kvm); + return ERR_PTR(err); + } + return kvm; } mmu_notifier_unregister returns void and it's reliable. The patch also adds a few needed but missing includes that would prevent kernel to compile after these changes on non-x86 archs (x86 didn't need them by luck). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix mm/filemap_xip.c build] [akpm@linux-foundation.org: fix mm/mmu_notifier.c build] Signed-off-by: Andrea Arcangeli <andrea@qumranet.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Kanoj Sarcar <kanojsarcar@yahoo.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Steve Wise <swise@opengridcomputing.com> Cc: Avi Kivity <avi@qumranet.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Marcelo Tosatti <marcelo@kvack.org> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Izik Eidus <izike@qumranet.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-28 22:46:29 +00:00
#include <linux/mmu_notifier.h>
#include <linux/migrate.h>
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
#include <linux/hugetlb.h>
#include <linux/huge_mm.h>
mm: fix XFS oops due to dirty pages without buffers on s390 On s390 any write to a page (even from kernel itself) sets architecture specific page dirty bit. Thus when a page is written to via buffered write, HW dirty bit gets set and when we later map and unmap the page, page_remove_rmap() finds the dirty bit and calls set_page_dirty(). Dirtying of a page which shouldn't be dirty can cause all sorts of problems to filesystems. The bug we observed in practice is that buffers from the page get freed, so when the page gets later marked as dirty and writeback writes it, XFS crashes due to an assertion BUG_ON(!PagePrivate(page)) in page_buffers() called from xfs_count_page_state(). Similar problem can also happen when zero_user_segment() call from xfs_vm_writepage() (or block_write_full_page() for that matter) set the hardware dirty bit during writeback, later buffers get freed, and then page unmapped. Fix the issue by ignoring s390 HW dirty bit for page cache pages of mappings with mapping_cap_account_dirty(). This is safe because for such mappings when a page gets marked as writeable in PTE it is also marked dirty in do_wp_page() or do_page_fault(). When the dirty bit is cleared by clear_page_dirty_for_io(), the page gets writeprotected in page_mkclean(). So pagecache page is writeable if and only if it is dirty. Thanks to Hugh Dickins for pointing out mapping has to have mapping_cap_account_dirty() for things to work and proposing a cleaned up variant of the patch. The patch has survived about two hours of running fsx-linux on tmpfs while heavily swapping and several days of running on out build machines where the original problem was triggered. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@vger.kernel.org> [3.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25 20:37:31 +00:00
#include <linux/backing-dev.h>
mm: introduce idle page tracking Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
#include <linux/page_idle.h>
#include <linux/memremap.h>
#include <linux/userfaultfd_k.h>
#include <linux/mm_inline.h>
#include <asm/tlbflush.h>
#define CREATE_TRACE_POINTS
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
#include <trace/events/tlb.h>
#include <trace/events/migrate.h>
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 03:26:44 +00:00
#include "internal.h"
static struct kmem_cache *anon_vma_cachep;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
static struct kmem_cache *anon_vma_chain_cachep;
static inline struct anon_vma *anon_vma_alloc(void)
{
struct anon_vma *anon_vma;
anon_vma = kmem_cache_alloc(anon_vma_cachep, GFP_KERNEL);
if (anon_vma) {
atomic_set(&anon_vma->refcount, 1);
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
anon_vma->num_children = 0;
anon_vma->num_active_vmas = 0;
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
anon_vma->parent = anon_vma;
/*
* Initialise the anon_vma root to point to itself. If called
* from fork, the root will be reset to the parents anon_vma.
*/
anon_vma->root = anon_vma;
}
return anon_vma;
}
static inline void anon_vma_free(struct anon_vma *anon_vma)
{
VM_BUG_ON(atomic_read(&anon_vma->refcount));
/*
* Synchronize against folio_lock_anon_vma_read() such that
* we can safely hold the lock without the anon_vma getting
* freed.
*
* Relies on the full mb implied by the atomic_dec_and_test() from
* put_anon_vma() against the acquire barrier implied by
* down_read_trylock() from folio_lock_anon_vma_read(). This orders:
*
* folio_lock_anon_vma_read() VS put_anon_vma()
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
* down_read_trylock() atomic_dec_and_test()
* LOCK MB
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
* atomic_read() rwsem_is_locked()
*
* LOCK should suffice since the actual taking of the lock must
* happen _before_ what follows.
*/
might_sleep();
if (rwsem_is_locked(&anon_vma->root->rwsem)) {
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
anon_vma_lock_write(anon_vma);
anon_vma_unlock_write(anon_vma);
}
kmem_cache_free(anon_vma_cachep, anon_vma);
}
static inline struct anon_vma_chain *anon_vma_chain_alloc(gfp_t gfp)
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
{
return kmem_cache_alloc(anon_vma_chain_cachep, gfp);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
}
static void anon_vma_chain_free(struct anon_vma_chain *anon_vma_chain)
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
{
kmem_cache_free(anon_vma_chain_cachep, anon_vma_chain);
}
static void anon_vma_chain_link(struct vm_area_struct *vma,
struct anon_vma_chain *avc,
struct anon_vma *anon_vma)
{
avc->vma = vma;
avc->anon_vma = anon_vma;
list_add(&avc->same_vma, &vma->anon_vma_chain);
mm anon rmap: replace same_anon_vma linked list with an interval tree. When a large VMA (anon or private file mapping) is first touched, which will populate its anon_vma field, and then split into many regions through the use of mprotect(), the original anon_vma ends up linking all of the vmas on a linked list. This can cause rmap to become inefficient, as we have to walk potentially thousands of irrelevent vmas before finding the one a given anon page might fall into. By replacing the same_anon_vma linked list with an interval tree (where each avc's interval is determined by its vma's start and last pgoffs), we can make rmap efficient for this use case again. While the change is large, all of its pieces are fairly simple. Most places that were walking the same_anon_vma list were looking for a known pgoff, so they can just use the anon_vma_interval_tree_foreach() interval tree iterator instead. The exception here is ksm, where the page's index is not known. It would probably be possible to rework ksm so that the index would be known, but for now I have decided to keep things simple and just walk the entirety of the interval tree there. When updating vma's that already have an anon_vma assigned, we must take care to re-index the corresponding avc's on their interval tree. This is done through the use of anon_vma_interval_tree_pre_update_vma() and anon_vma_interval_tree_post_update_vma(), which remove the avc's from their interval tree before the update and re-insert them after the update. The anon_vma stays locked during the update, so there is no chance that rmap would miss the vmas that are being updated. Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Santos <daniel.santos@pobox.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:31:39 +00:00
anon_vma_interval_tree_insert(avc, &anon_vma->rb_root);
}
/**
* __anon_vma_prepare - attach an anon_vma to a memory region
* @vma: the memory region in question
*
* This makes sure the memory mapping described by 'vma' has
* an 'anon_vma' attached to it, so that we can associate the
* anonymous pages mapped into it with that anon_vma.
*
* The common case will be that we already have one, which
* is handled inline by anon_vma_prepare(). But if
* not we either need to find an adjacent mapping that we
* can re-use the anon_vma from (very common when the only
* reason for splitting a vma has been mprotect()), or we
* allocate a new one.
*
* Anon-vma allocations are very subtle, because we may have
* optimistically looked up an anon_vma in folio_lock_anon_vma_read()
* and that may actually touch the rwsem even in the newly
* allocated vma (it depends on RCU to make sure that the
* anon_vma isn't actually destroyed).
*
* As a result, we need to do proper anon_vma locking even
* for the new allocation. At the same time, we do not want
* to do any locking for the common case of already having
* an anon_vma.
*
* This must be called with the mmap_lock held for reading.
*/
int __anon_vma_prepare(struct vm_area_struct *vma)
{
struct mm_struct *mm = vma->vm_mm;
struct anon_vma *anon_vma, *allocated;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
struct anon_vma_chain *avc;
might_sleep();
avc = anon_vma_chain_alloc(GFP_KERNEL);
if (!avc)
goto out_enomem;
anon_vma = find_mergeable_anon_vma(vma);
allocated = NULL;
if (!anon_vma) {
anon_vma = anon_vma_alloc();
if (unlikely(!anon_vma))
goto out_enomem_free_avc;
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
anon_vma->num_children++; /* self-parent link for new root */
allocated = anon_vma;
}
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
anon_vma_lock_write(anon_vma);
/* page_table_lock to protect against threads */
spin_lock(&mm->page_table_lock);
if (likely(!vma->anon_vma)) {
vma->anon_vma = anon_vma;
anon_vma_chain_link(vma, avc, anon_vma);
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
anon_vma->num_active_vmas++;
allocated = NULL;
avc = NULL;
}
spin_unlock(&mm->page_table_lock);
anon_vma_unlock_write(anon_vma);
if (unlikely(allocated))
put_anon_vma(allocated);
if (unlikely(avc))
anon_vma_chain_free(avc);
return 0;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
out_enomem_free_avc:
anon_vma_chain_free(avc);
out_enomem:
return -ENOMEM;
}
/*
* This is a useful helper function for locking the anon_vma root as
* we traverse the vma->anon_vma_chain, looping over anon_vma's that
* have the same vma.
*
* Such anon_vma's should have the same root, so you'd expect to see
* just a single mutex_lock for the whole traversal.
*/
static inline struct anon_vma *lock_anon_vma_root(struct anon_vma *root, struct anon_vma *anon_vma)
{
struct anon_vma *new_root = anon_vma->root;
if (new_root != root) {
if (WARN_ON_ONCE(root))
up_write(&root->rwsem);
root = new_root;
down_write(&root->rwsem);
}
return root;
}
static inline void unlock_anon_vma_root(struct anon_vma *root)
{
if (root)
up_write(&root->rwsem);
}
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
/*
* Attach the anon_vmas from src to dst.
* Returns 0 on success, -ENOMEM on failure.
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
*
* anon_vma_clone() is called by vma_expand(), vma_merge(), __split_vma(),
* copy_vma() and anon_vma_fork(). The first four want an exact copy of src,
* while the last one, anon_vma_fork(), may try to reuse an existing anon_vma to
* prevent endless growth of anon_vma. Since dst->anon_vma is set to NULL before
* call, we can identify this case by checking (!dst->anon_vma &&
* src->anon_vma).
*
* If (!dst->anon_vma && src->anon_vma) is true, this function tries to find
* and reuse existing anon_vma which has no vmas and only one child anon_vma.
* This prevents degradation of anon_vma hierarchy to endless linear chain in
* case of constantly forking task. On the other hand, an anon_vma with more
* than one child isn't reused even if there was no alive vma, thus rmap
* walker has a good chance of avoiding scanning the whole hierarchy when it
* searches where page is mapped.
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
*/
int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src)
{
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
struct anon_vma_chain *avc, *pavc;
struct anon_vma *root = NULL;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
struct anon_vma *anon_vma;
avc = anon_vma_chain_alloc(GFP_NOWAIT | __GFP_NOWARN);
if (unlikely(!avc)) {
unlock_anon_vma_root(root);
root = NULL;
avc = anon_vma_chain_alloc(GFP_KERNEL);
if (!avc)
goto enomem_failure;
}
anon_vma = pavc->anon_vma;
root = lock_anon_vma_root(root, anon_vma);
anon_vma_chain_link(dst, avc, anon_vma);
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
/*
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
* Reuse existing anon_vma if it has no vma and only one
* anon_vma child.
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
*
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
* Root anon_vma is never reused:
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
* it has self-parent reference and at least one child.
*/
if (!dst->anon_vma && src->anon_vma &&
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
anon_vma->num_children < 2 &&
anon_vma->num_active_vmas == 0)
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
dst->anon_vma = anon_vma;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
}
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
if (dst->anon_vma)
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
dst->anon_vma->num_active_vmas++;
unlock_anon_vma_root(root);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
return 0;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
enomem_failure:
mm: fix anon_vma->degree underflow in anon_vma endless growing prevention I have constantly stumbled upon "kernel BUG at mm/rmap.c:399!" after upgrading to 3.19 and had no luck with 4.0-rc1 neither. So, after looking into new logic introduced by commit 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy"), I found chances are that unlink_anon_vmas() is called without incrementing dst->anon_vma->degree in anon_vma_clone() due to allocation failure. If dst->anon_vma is not NULL in error path, its degree will be incorrectly decremented in unlink_anon_vmas() and eventually underflow when exiting as a result of another call to unlink_anon_vmas(). That's how "kernel BUG at mm/rmap.c:399!" is triggered for me. This patch fixes the underflow by dropping dst->anon_vma when allocation fails. It's safe to do so regardless of original value of dst->anon_vma because dst->anon_vma doesn't have valid meaning if anon_vma_clone() fails. Besides, callers don't care dst->anon_vma in such case neither. Also suggested by Michal Hocko, we can clean up vma_adjust() a bit as anon_vma_clone() now does the work. [akpm@linux-foundation.org: tweak comment] Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Signed-off-by: Leon Yu <chianglungyu@gmail.com> Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25 22:55:11 +00:00
/*
* dst->anon_vma is dropped here otherwise its num_active_vmas can
* be incorrectly decremented in unlink_anon_vmas().
mm: fix anon_vma->degree underflow in anon_vma endless growing prevention I have constantly stumbled upon "kernel BUG at mm/rmap.c:399!" after upgrading to 3.19 and had no luck with 4.0-rc1 neither. So, after looking into new logic introduced by commit 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy"), I found chances are that unlink_anon_vmas() is called without incrementing dst->anon_vma->degree in anon_vma_clone() due to allocation failure. If dst->anon_vma is not NULL in error path, its degree will be incorrectly decremented in unlink_anon_vmas() and eventually underflow when exiting as a result of another call to unlink_anon_vmas(). That's how "kernel BUG at mm/rmap.c:399!" is triggered for me. This patch fixes the underflow by dropping dst->anon_vma when allocation fails. It's safe to do so regardless of original value of dst->anon_vma because dst->anon_vma doesn't have valid meaning if anon_vma_clone() fails. Besides, callers don't care dst->anon_vma in such case neither. Also suggested by Michal Hocko, we can clean up vma_adjust() a bit as anon_vma_clone() now does the work. [akpm@linux-foundation.org: tweak comment] Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Signed-off-by: Leon Yu <chianglungyu@gmail.com> Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25 22:55:11 +00:00
* We can safely do this because callers of anon_vma_clone() don't care
* about dst->anon_vma if anon_vma_clone() failed.
*/
dst->anon_vma = NULL;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
unlink_anon_vmas(dst);
return -ENOMEM;
}
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
/*
* Attach vma to its own anon_vma, as well as to the anon_vmas that
* the corresponding VMA in the parent process is attached to.
* Returns 0 on success, non-zero on failure.
*/
int anon_vma_fork(struct vm_area_struct *vma, struct vm_area_struct *pvma)
{
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
struct anon_vma_chain *avc;
struct anon_vma *anon_vma;
int error;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
/* Don't bother if the parent process has no anon_vma here. */
if (!pvma->anon_vma)
return 0;
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
/* Drop inherited anon_vma, we'll reuse existing or allocate new. */
vma->anon_vma = NULL;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
/*
* First, attach the new VMA to the parent VMA's anon_vmas,
* so rmap can find non-COWed pages in child processes.
*/
error = anon_vma_clone(vma, pvma);
if (error)
return error;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
/* An existing anon_vma has been reused, all done then. */
if (vma->anon_vma)
return 0;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
/* Then add our own anon_vma. */
anon_vma = anon_vma_alloc();
if (!anon_vma)
goto out_error;
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
anon_vma->num_active_vmas++;
avc = anon_vma_chain_alloc(GFP_KERNEL);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
if (!avc)
goto out_error_free_anon_vma;
/*
* The root anon_vma's rwsem is the lock actually used when we
* lock any of the anon_vmas in this anon_vma tree.
*/
anon_vma->root = pvma->anon_vma->root;
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
anon_vma->parent = pvma->anon_vma;
/*
* With refcounts, an anon_vma can stay around longer than the
* process it belongs to. The root anon_vma needs to be pinned until
* this anon_vma is freed, because the lock lives in the root.
*/
get_anon_vma(anon_vma->root);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
/* Mark this anon_vma as the one where our new (COWed) pages go. */
vma->anon_vma = anon_vma;
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
anon_vma_lock_write(anon_vma);
anon_vma_chain_link(vma, avc, anon_vma);
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
anon_vma->parent->num_children++;
anon_vma_unlock_write(anon_vma);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
return 0;
out_error_free_anon_vma:
put_anon_vma(anon_vma);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
out_error:
unlink_anon_vmas(vma);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
return -ENOMEM;
}
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
void unlink_anon_vmas(struct vm_area_struct *vma)
{
struct anon_vma_chain *avc, *next;
struct anon_vma *root = NULL;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
/*
* Unlink each anon_vma chained to the VMA. This list is ordered
* from newest to oldest, ensuring the root anon_vma gets freed last.
*/
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
struct anon_vma *anon_vma = avc->anon_vma;
root = lock_anon_vma_root(root, anon_vma);
mm anon rmap: replace same_anon_vma linked list with an interval tree. When a large VMA (anon or private file mapping) is first touched, which will populate its anon_vma field, and then split into many regions through the use of mprotect(), the original anon_vma ends up linking all of the vmas on a linked list. This can cause rmap to become inefficient, as we have to walk potentially thousands of irrelevent vmas before finding the one a given anon page might fall into. By replacing the same_anon_vma linked list with an interval tree (where each avc's interval is determined by its vma's start and last pgoffs), we can make rmap efficient for this use case again. While the change is large, all of its pieces are fairly simple. Most places that were walking the same_anon_vma list were looking for a known pgoff, so they can just use the anon_vma_interval_tree_foreach() interval tree iterator instead. The exception here is ksm, where the page's index is not known. It would probably be possible to rework ksm so that the index would be known, but for now I have decided to keep things simple and just walk the entirety of the interval tree there. When updating vma's that already have an anon_vma assigned, we must take care to re-index the corresponding avc's on their interval tree. This is done through the use of anon_vma_interval_tree_pre_update_vma() and anon_vma_interval_tree_post_update_vma(), which remove the avc's from their interval tree before the update and re-insert them after the update. The anon_vma stays locked during the update, so there is no chance that rmap would miss the vmas that are being updated. Signed-off-by: Michel Lespinasse <walken@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Santos <daniel.santos@pobox.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-08 23:31:39 +00:00
anon_vma_interval_tree_remove(avc, &anon_vma->rb_root);
/*
* Leave empty anon_vmas on the list - we'll need
* to free them outside the lock.
*/
if (RB_EMPTY_ROOT(&anon_vma->rb_root.rb_root)) {
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
anon_vma->parent->num_children--;
continue;
mm: prevent endless growth of anon_vma hierarchy Constantly forking task causes unlimited grow of anon_vma chain. Each next child allocates new level of anon_vmas and links vma to all previous levels because pages might be inherited from any level. This patch adds heuristic which decides to reuse existing anon_vma instead of forking new one. It adds counter anon_vma->degree which counts linked vmas and directly descending anon_vmas and reuses anon_vma if counter is lower than two. As a result each anon_vma has either vma or at least two descending anon_vmas. In such trees half of nodes are leafs with alive vmas, thus count of anon_vmas is no more than two times bigger than count of vmas. This heuristic reuses anon_vmas as few as possible because each reuse adds false aliasing among vmas and rmap walker ought to scan more ptes when it searches where page is might be mapped. Link: http://lkml.kernel.org/r/20120816024610.GA5350@evergreen.ssec.wisc.edu Fixes: 5beb49305251 ("mm: change anon_vma linking to fix multi-process server scalability issue") [akpm@linux-foundation.org: fix typo, per Rik] Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Reported-by: Daniel Forrest <dan.forrest@ssec.wisc.edu> Tested-by: Michal Hocko <mhocko@suse.cz> Tested-by: Jerome Marchand <jmarchan@redhat.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [2.6.34+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-08 22:32:15 +00:00
}
list_del(&avc->same_vma);
anon_vma_chain_free(avc);
}
if (vma->anon_vma) {
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
vma->anon_vma->num_active_vmas--;
/*
* vma would still be needed after unlink, and anon_vma will be prepared
* when handle fault.
*/
vma->anon_vma = NULL;
}
unlock_anon_vma_root(root);
/*
* Iterate the list once more, it now only contains empty and unlinked
* anon_vmas, destroy them. Could not do before due to __put_anon_vma()
* needing to write-acquire the anon_vma->root->rwsem.
*/
list_for_each_entry_safe(avc, next, &vma->anon_vma_chain, same_vma) {
struct anon_vma *anon_vma = avc->anon_vma;
mm/rmap: Fix anon_vma->degree ambiguity leading to double-reuse anon_vma->degree tracks the combined number of child anon_vmas and VMAs that use the anon_vma as their ->anon_vma. anon_vma_clone() then assumes that for any anon_vma attached to src->anon_vma_chain other than src->anon_vma, it is impossible for it to be a leaf node of the VMA tree, meaning that for such VMAs ->degree is elevated by 1 because of a child anon_vma, meaning that if ->degree equals 1 there are no VMAs that use the anon_vma as their ->anon_vma. This assumption is wrong because the ->degree optimization leads to leaf nodes being abandoned on anon_vma_clone() - an existing anon_vma is reused and no new parent-child relationship is created. So it is possible to reuse an anon_vma for one VMA while it is still tied to another VMA. This is an issue because is_mergeable_anon_vma() and its callers assume that if two VMAs have the same ->anon_vma, the list of anon_vmas attached to the VMAs is guaranteed to be the same. When this assumption is violated, vma_merge() can merge pages into a VMA that is not attached to the corresponding anon_vma, leading to dangling page->mapping pointers that will be dereferenced during rmap walks. Fix it by separately tracking the number of child anon_vmas and the number of VMAs using the anon_vma as their ->anon_vma. Fixes: 7a3ef208e662 ("mm: prevent endless growth of anon_vma hierarchy") Cc: stable@kernel.org Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-31 17:06:00 +00:00
VM_WARN_ON(anon_vma->num_children);
VM_WARN_ON(anon_vma->num_active_vmas);
put_anon_vma(anon_vma);
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
list_del(&avc->same_vma);
anon_vma_chain_free(avc);
}
}
static void anon_vma_ctor(void *data)
{
struct anon_vma *anon_vma = data;
init_rwsem(&anon_vma->rwsem);
atomic_set(&anon_vma->refcount, 0);
anon_vma->rb_root = RB_ROOT_CACHED;
}
void __init anon_vma_init(void)
{
anon_vma_cachep = kmem_cache_create("anon_vma", sizeof(struct anon_vma),
0, SLAB_TYPESAFE_BY_RCU|SLAB_PANIC|SLAB_ACCOUNT,
2016-01-14 23:18:21 +00:00
anon_vma_ctor);
anon_vma_chain_cachep = KMEM_CACHE(anon_vma_chain,
SLAB_PANIC|SLAB_ACCOUNT);
}
/*
* Getting a lock on a stable anon_vma from a page off the LRU is tricky!
*
* Since there is no serialization what so ever against page_remove_rmap()
* the best this function can do is return a refcount increased anon_vma
* that might have been relevant to this page.
*
* The page might have been remapped to a different anon_vma or the anon_vma
* returned may already be freed (and even reused).
*
* In case it was remapped to a different anon_vma, the new anon_vma will be a
* child of the old anon_vma, and the anon_vma lifetime rules will therefore
* ensure that any anon_vma obtained from the page will still be valid for as
* long as we observe page_mapped() [ hence all those page_mapped() tests ].
*
* All users of this function must be very careful when walking the anon_vma
* chain and verify that the page in question is indeed mapped in it
* [ something equivalent to page_mapped_in_vma() ].
*
* Since anon_vma's slab is SLAB_TYPESAFE_BY_RCU and we know from
* page_remove_rmap() that the anon_vma pointer from page->mapping is valid
* if there is a mapcount, we can dereference the anon_vma after observing
* those.
*/
struct anon_vma *folio_get_anon_vma(struct folio *folio)
{
struct anon_vma *anon_vma = NULL;
unsigned long anon_mapping;
rcu_read_lock();
anon_mapping = (unsigned long)READ_ONCE(folio->mapping);
if ((anon_mapping & PAGE_MAPPING_FLAGS) != PAGE_MAPPING_ANON)
goto out;
if (!folio_mapped(folio))
goto out;
anon_vma = (struct anon_vma *) (anon_mapping - PAGE_MAPPING_ANON);
if (!atomic_inc_not_zero(&anon_vma->refcount)) {
anon_vma = NULL;
goto out;
}
/*
* If this folio is still mapped, then its anon_vma cannot have been
* freed. But if it has been unmapped, we have no security against the
* anon_vma structure being freed and reused (for another anon_vma:
* SLAB_TYPESAFE_BY_RCU guarantees that - so the atomic_inc_not_zero()
* above cannot corrupt).
*/
if (!folio_mapped(folio)) {
rcu_read_unlock();
put_anon_vma(anon_vma);
return NULL;
}
out:
rcu_read_unlock();
return anon_vma;
}
/*
* Similar to folio_get_anon_vma() except it locks the anon_vma.
*
* Its a little more complex as it tries to keep the fast path to a single
* atomic op -- the trylock. If we fail the trylock, we fall back to getting a
* reference like with folio_get_anon_vma() and then block on the mutex
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
* on !rwc->try_lock case.
*/
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
struct anon_vma *folio_lock_anon_vma_read(struct folio *folio,
struct rmap_walk_control *rwc)
{
struct anon_vma *anon_vma = NULL;
struct anon_vma *root_anon_vma;
unsigned long anon_mapping;
rcu_read_lock();
anon_mapping = (unsigned long)READ_ONCE(folio->mapping);
if ((anon_mapping & PAGE_MAPPING_FLAGS) != PAGE_MAPPING_ANON)
goto out;
if (!folio_mapped(folio))
goto out;
anon_vma = (struct anon_vma *) (anon_mapping - PAGE_MAPPING_ANON);
root_anon_vma = READ_ONCE(anon_vma->root);
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
if (down_read_trylock(&root_anon_vma->rwsem)) {
/*
* If the folio is still mapped, then this anon_vma is still
* its anon_vma, and holding the mutex ensures that it will
* not go away, see anon_vma_free().
*/
if (!folio_mapped(folio)) {
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
up_read(&root_anon_vma->rwsem);
anon_vma = NULL;
}
goto out;
}
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
if (rwc && rwc->try_lock) {
anon_vma = NULL;
rwc->contended = true;
goto out;
}
/* trylock failed, we got to sleep */
if (!atomic_inc_not_zero(&anon_vma->refcount)) {
anon_vma = NULL;
goto out;
}
if (!folio_mapped(folio)) {
rcu_read_unlock();
put_anon_vma(anon_vma);
return NULL;
}
/* we pinned the anon_vma, its safe to sleep */
rcu_read_unlock();
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
anon_vma_lock_read(anon_vma);
if (atomic_dec_and_test(&anon_vma->refcount)) {
/*
* Oops, we held the last refcount, release the lock
* and bail -- can't simply use put_anon_vma() because
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
* we'll deadlock on the anon_vma_lock_write() recursion.
*/
mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable rmap_walk_anon() and try_to_unmap_anon() appears to be too careful about locking the anon vma: while it needs protection against anon vma list modifications, it does not need exclusive access to the list itself. Transforming this exclusive lock to a read-locked rwsem removes a global lock from the hot path of page-migration intense threaded workloads which can cause pathological performance like this: 96.43% process 0 [kernel.kallsyms] [k] perf_trace_sched_switch | --- perf_trace_sched_switch __schedule schedule schedule_preempt_disabled __mutex_lock_common.isra.6 __mutex_lock_slowpath mutex_lock | |--50.61%-- rmap_walk | move_to_new_page | migrate_pages | migrate_misplaced_page | __do_numa_page.isra.69 | handle_pte_fault | handle_mm_fault | __do_page_fault | do_page_fault | page_fault | __memset_sse2 | | | --100.00%-- worker_thread | | | --100.00%-- start_thread | --49.39%-- page_lock_anon_vma try_to_unmap_anon try_to_unmap migrate_pages migrate_misplaced_page __do_numa_page.isra.69 handle_pte_fault handle_mm_fault __do_page_fault do_page_fault page_fault __memset_sse2 | --100.00%-- worker_thread start_thread With this change applied the profile is now nicely flat and there's no anon-vma related scheduling/blocking. Rename anon_vma_[un]lock() => anon_vma_[un]lock_write(), to make it clearer that it's an exclusive write-lock in that case - suggested by Rik van Riel. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Mel Gorman <mgorman@suse.de>
2012-12-02 19:56:50 +00:00
anon_vma_unlock_read(anon_vma);
__put_anon_vma(anon_vma);
anon_vma = NULL;
}
return anon_vma;
out:
rcu_read_unlock();
return anon_vma;
}
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
#ifdef CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
/*
* Flush TLB entries for recently unmapped pages from remote CPUs. It is
* important if a PTE was dirty when it was unmapped that it's flushed
* before any IO is initiated on the page to prevent lost writes. Similarly,
* it must be flushed before freeing to prevent data leakage.
*/
void try_to_unmap_flush(void)
{
struct tlbflush_unmap_batch *tlb_ubc = &current->tlb_ubc;
if (!tlb_ubc->flush_required)
return;
mm, x86/mm: Make the batched unmap TLB flush API more generic try_to_unmap_flush() used to open-code a rather x86-centric flush sequence: local_flush_tlb() + flush_tlb_others(). Rearrange the code so that the arch (only x86 for now) provides arch_tlbbatch_add_mm() and arch_tlbbatch_flush() and the core code calls those functions instead. I'll want this for x86 because, to enable address space ids, I can't support the flush_tlb_others() mode used by exising try_to_unmap_flush() implementation with good performance. I can support the new API fairly easily, though. I imagine that other architectures may be in a similar position. Architectures with strong remote flush primitives (arm64?) may have even worse performance problems with flush_tlb_others() the way that try_to_unmap_flush() uses it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/19f25a8581f9fb77876b7ff3b001f89835e34ea3.1495492063.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-22 22:30:03 +00:00
arch_tlbbatch_flush(&tlb_ubc->arch);
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
tlb_ubc->flush_required = false;
tlb_ubc->writable = false;
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
}
/* Flush iff there are potentially writable TLB entries that can race with IO */
void try_to_unmap_flush_dirty(void)
{
struct tlbflush_unmap_batch *tlb_ubc = &current->tlb_ubc;
if (tlb_ubc->writable)
try_to_unmap_flush();
}
mm/rmap: fix potential batched TLB flush race In theory, the following race is possible for batched TLB flushing. CPU0 CPU1 ---- ---- shrink_page_list() unmap zap_pte_range() flush_tlb_batched_pending() flush_tlb_mm() try_to_unmap() set_tlb_ubc_flush_pending() mm->tlb_flush_batched = true mm->tlb_flush_batched = false After the TLB is flushed on CPU1 via flush_tlb_mm() and before mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and the TLB flushing is pended. Then the pended TLB flushing will be lost. Although both set_tlb_ubc_flush_pending() and flush_tlb_batched_pending() are called with PTL locked, different PTL instances may be used. Because the race window is really small, and the lost TLB flushing will cause problem only if a TLB entry is inserted before the unmapping in the race window, the race is only theoretical. But the fix is simple and cheap too. Syzbot has reported this too as follows: ================================================================== BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one write to 0xffff8881072cfbbc of 1 bytes by task 17406 on cpu 1: flush_tlb_batched_pending+0x5f/0x80 mm/rmap.c:691 madvise_free_pte_range+0xee/0x7d0 mm/madvise.c:594 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0x981/0x1160 mm/pagewalk.c:379 walk_page_range+0x131/0x300 mm/pagewalk.c:475 madvise_free_single_vma mm/madvise.c:734 [inline] madvise_dontneed_free mm/madvise.c:822 [inline] madvise_vma mm/madvise.c:996 [inline] do_madvise+0xe4a/0x1140 mm/madvise.c:1202 __do_sys_madvise mm/madvise.c:1228 [inline] __se_sys_madvise mm/madvise.c:1226 [inline] __x64_sys_madvise+0x5d/0x70 mm/madvise.c:1226 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0: set_tlb_ubc_flush_pending mm/rmap.c:636 [inline] try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515 rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301 try_to_unmap+0xec/0x110 shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719 shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394 shrink_list mm/vmscan.c:2621 [inline] shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940 shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129 shrink_node+0x8f6/0x1190 mm/vmscan.c:3252 kswapd_shrink_node mm/vmscan.c:4022 [inline] balance_pgdat+0x702/0xd30 mm/vmscan.c:4213 kswapd+0x200/0x340 mm/vmscan.c:4473 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ================================================================== [akpm@linux-foundation.org: tweak comments] Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:09:16 +00:00
/*
* Bits 0-14 of mm->tlb_flush_batched record pending generations.
* Bits 16-30 of mm->tlb_flush_batched bit record flushed generations.
*/
#define TLB_FLUSH_BATCH_FLUSHED_SHIFT 16
#define TLB_FLUSH_BATCH_PENDING_MASK \
((1 << (TLB_FLUSH_BATCH_FLUSHED_SHIFT - 1)) - 1)
#define TLB_FLUSH_BATCH_PENDING_LARGE \
(TLB_FLUSH_BATCH_PENDING_MASK / 2)
mm/tlbbatch: rename and extend some functions This patch does some preparation works to extend batched TLB flush to arm64. Including: - Extend set_tlb_ubc_flush_pending() and arch_tlbbatch_add_mm() to accept an additional argument for address, architectures like arm64 may need this for tlbi. - Rename arch_tlbbatch_add_mm() to arch_tlbbatch_add_pending() to match its current function since we don't need to handle mm on architectures like arm64 and add_mm is not proper, add_pending will make sense to both as on x86 we're pending the TLB flush operations while on arm64 we're pending the synchronize operations. This intends no functional changes on x86. Link: https://lkml.kernel.org/r/20230717131004.12662-3-yangyicong@huawei.com Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-17 13:10:02 +00:00
static void set_tlb_ubc_flush_pending(struct mm_struct *mm, pte_t pteval,
unsigned long uaddr)
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
{
struct tlbflush_unmap_batch *tlb_ubc = &current->tlb_ubc;
int batch;
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible 0Day/LKP reported a performance regression for commit 7e12beb8ca2a ("migrate_pages: batch flushing TLB"). In the commit, the TLB flushing during page migration is batched. So, in try_to_migrate_one(), ptep_clear_flush() is replaced with set_tlb_ubc_flush_pending(). In further investigation, it is found that the TLB flushing can be avoided in ptep_clear_flush() if the PTE is inaccessible. In fact, we can optimize in similar way for the batched TLB flushing too to improve the performance. So in this patch, we check pte_accessible() before set_tlb_ubc_flush_pending() in try_to_unmap/migrate_one(). Tests show that the benchmark score of the anon-cow-rand-mt test case of vm-scalability test suite can improve up to 2.1% with the patch on a Intel server machine. The TLB flushing IPI can reduce up to 44.3%. Link: https://lore.kernel.org/oe-lkp/202303192325.ecbaf968-yujie.liu@intel.com Link: https://lore.kernel.org/oe-lkp/ab92aaddf1b52ede15e2c608696c36765a2602c1.camel@intel.com/ Link: https://lkml.kernel.org/r/20230424065408.188498-1-ying.huang@intel.com Fixes: 7e12beb8ca2a ("migrate_pages: batch flushing TLB") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: kernel test robot <yujie.liu@intel.com> Reviewed-by: Nadav Amit <namit@vmware.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-04-24 06:54:08 +00:00
bool writable = pte_dirty(pteval);
if (!pte_accessible(mm, pteval))
return;
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
mm/tlbbatch: rename and extend some functions This patch does some preparation works to extend batched TLB flush to arm64. Including: - Extend set_tlb_ubc_flush_pending() and arch_tlbbatch_add_mm() to accept an additional argument for address, architectures like arm64 may need this for tlbi. - Rename arch_tlbbatch_add_mm() to arch_tlbbatch_add_pending() to match its current function since we don't need to handle mm on architectures like arm64 and add_mm is not proper, add_pending will make sense to both as on x86 we're pending the TLB flush operations while on arm64 we're pending the synchronize operations. This intends no functional changes on x86. Link: https://lkml.kernel.org/r/20230717131004.12662-3-yangyicong@huawei.com Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-17 13:10:02 +00:00
arch_tlbbatch_add_pending(&tlb_ubc->arch, mm, uaddr);
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
tlb_ubc->flush_required = true;
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
/*
* Ensure compiler does not re-order the setting of tlb_flush_batched
* before the PTE is cleared.
*/
barrier();
mm/rmap: fix potential batched TLB flush race In theory, the following race is possible for batched TLB flushing. CPU0 CPU1 ---- ---- shrink_page_list() unmap zap_pte_range() flush_tlb_batched_pending() flush_tlb_mm() try_to_unmap() set_tlb_ubc_flush_pending() mm->tlb_flush_batched = true mm->tlb_flush_batched = false After the TLB is flushed on CPU1 via flush_tlb_mm() and before mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and the TLB flushing is pended. Then the pended TLB flushing will be lost. Although both set_tlb_ubc_flush_pending() and flush_tlb_batched_pending() are called with PTL locked, different PTL instances may be used. Because the race window is really small, and the lost TLB flushing will cause problem only if a TLB entry is inserted before the unmapping in the race window, the race is only theoretical. But the fix is simple and cheap too. Syzbot has reported this too as follows: ================================================================== BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one write to 0xffff8881072cfbbc of 1 bytes by task 17406 on cpu 1: flush_tlb_batched_pending+0x5f/0x80 mm/rmap.c:691 madvise_free_pte_range+0xee/0x7d0 mm/madvise.c:594 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0x981/0x1160 mm/pagewalk.c:379 walk_page_range+0x131/0x300 mm/pagewalk.c:475 madvise_free_single_vma mm/madvise.c:734 [inline] madvise_dontneed_free mm/madvise.c:822 [inline] madvise_vma mm/madvise.c:996 [inline] do_madvise+0xe4a/0x1140 mm/madvise.c:1202 __do_sys_madvise mm/madvise.c:1228 [inline] __se_sys_madvise mm/madvise.c:1226 [inline] __x64_sys_madvise+0x5d/0x70 mm/madvise.c:1226 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0: set_tlb_ubc_flush_pending mm/rmap.c:636 [inline] try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515 rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301 try_to_unmap+0xec/0x110 shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719 shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394 shrink_list mm/vmscan.c:2621 [inline] shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940 shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129 shrink_node+0x8f6/0x1190 mm/vmscan.c:3252 kswapd_shrink_node mm/vmscan.c:4022 [inline] balance_pgdat+0x702/0xd30 mm/vmscan.c:4213 kswapd+0x200/0x340 mm/vmscan.c:4473 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ================================================================== [akpm@linux-foundation.org: tweak comments] Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:09:16 +00:00
batch = atomic_read(&mm->tlb_flush_batched);
retry:
if ((batch & TLB_FLUSH_BATCH_PENDING_MASK) > TLB_FLUSH_BATCH_PENDING_LARGE) {
/*
* Prevent `pending' from catching up with `flushed' because of
* overflow. Reset `pending' and `flushed' to be 1 and 0 if
* `pending' becomes large.
*/
if (!atomic_try_cmpxchg(&mm->tlb_flush_batched, &batch, 1))
mm/rmap: fix potential batched TLB flush race In theory, the following race is possible for batched TLB flushing. CPU0 CPU1 ---- ---- shrink_page_list() unmap zap_pte_range() flush_tlb_batched_pending() flush_tlb_mm() try_to_unmap() set_tlb_ubc_flush_pending() mm->tlb_flush_batched = true mm->tlb_flush_batched = false After the TLB is flushed on CPU1 via flush_tlb_mm() and before mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and the TLB flushing is pended. Then the pended TLB flushing will be lost. Although both set_tlb_ubc_flush_pending() and flush_tlb_batched_pending() are called with PTL locked, different PTL instances may be used. Because the race window is really small, and the lost TLB flushing will cause problem only if a TLB entry is inserted before the unmapping in the race window, the race is only theoretical. But the fix is simple and cheap too. Syzbot has reported this too as follows: ================================================================== BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one write to 0xffff8881072cfbbc of 1 bytes by task 17406 on cpu 1: flush_tlb_batched_pending+0x5f/0x80 mm/rmap.c:691 madvise_free_pte_range+0xee/0x7d0 mm/madvise.c:594 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0x981/0x1160 mm/pagewalk.c:379 walk_page_range+0x131/0x300 mm/pagewalk.c:475 madvise_free_single_vma mm/madvise.c:734 [inline] madvise_dontneed_free mm/madvise.c:822 [inline] madvise_vma mm/madvise.c:996 [inline] do_madvise+0xe4a/0x1140 mm/madvise.c:1202 __do_sys_madvise mm/madvise.c:1228 [inline] __se_sys_madvise mm/madvise.c:1226 [inline] __x64_sys_madvise+0x5d/0x70 mm/madvise.c:1226 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0: set_tlb_ubc_flush_pending mm/rmap.c:636 [inline] try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515 rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301 try_to_unmap+0xec/0x110 shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719 shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394 shrink_list mm/vmscan.c:2621 [inline] shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940 shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129 shrink_node+0x8f6/0x1190 mm/vmscan.c:3252 kswapd_shrink_node mm/vmscan.c:4022 [inline] balance_pgdat+0x702/0xd30 mm/vmscan.c:4213 kswapd+0x200/0x340 mm/vmscan.c:4473 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ================================================================== [akpm@linux-foundation.org: tweak comments] Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:09:16 +00:00
goto retry;
} else {
atomic_inc(&mm->tlb_flush_batched);
}
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
/*
* If the PTE was dirty then it's best to assume it's writable. The
* caller must use try_to_unmap_flush_dirty() or try_to_unmap_flush()
* before the page is queued for IO.
*/
if (writable)
tlb_ubc->writable = true;
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
}
/*
* Returns true if the TLB flush should be deferred to the end of a batch of
* unmap operations to reduce IPIs.
*/
static bool should_defer_flush(struct mm_struct *mm, enum ttu_flags flags)
{
if (!(flags & TTU_BATCH_FLUSH))
return false;
mm/tlbbatch: introduce arch_tlbbatch_should_defer() Patch series "arm64: support batched/deferred tlb shootdown during page reclamation/migration", v11. Though ARM64 has the hardware to do tlb shootdown, the hardware broadcasting is not free. A simplest micro benchmark shows even on snapdragon 888 with only 8 cores, the overhead for ptep_clear_flush is huge even for paging out one page mapped by only one process: 5.36% a.out [kernel.kallsyms] [k] ptep_clear_flush While pages are mapped by multiple processes or HW has more CPUs, the cost should become even higher due to the bad scalability of tlb shootdown. The same benchmark can result in 16.99% CPU consumption on ARM64 server with around 100 cores according to the test on patch 4/4. This patchset leverages the existing BATCHED_UNMAP_TLB_FLUSH by 1. only send tlbi instructions in the first stage - arch_tlbbatch_add_mm() 2. wait for the completion of tlbi by dsb while doing tlbbatch sync in arch_tlbbatch_flush() Testing on snapdragon shows the overhead of ptep_clear_flush is removed by the patchset. The micro benchmark becomes 5% faster even for one page mapped by single process on snapdragon 888. Since BATCHED_UNMAP_TLB_FLUSH is implemented only on x86, the patchset does some renaming/extension for the current implementation first (Patch 1-3), then add the support on arm64 (Patch 4). This patch (of 4): The entire scheme of deferred TLB flush in reclaim path rests on the fact that the cost to refill TLB entries is less than flushing out individual entries by sending IPI to remote CPUs. But architecture can have different ways to evaluate that. Hence apart from checking TTU_BATCH_FLUSH in the TTU flags, rest of the decision should be architecture specific. [yangyicong@hisilicon.com: rebase and fix incorrect return value type] Link: https://lkml.kernel.org/r/20230717131004.12662-1-yangyicong@huawei.com Link: https://lkml.kernel.org/r/20230717131004.12662-2-yangyicong@huawei.com Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [https://lore.kernel.org/linuxppc-dev/20171101101735.2318-2-khandual@linux.vnet.ibm.com/] Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Barry Song <baohua@kernel.org> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nadav Amit <namit@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-17 13:10:01 +00:00
return arch_tlbbatch_should_defer(mm);
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
}
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
/*
* Reclaim unmaps pages under the PTL but do not flush the TLB prior to
* releasing the PTL if TLB flushes are batched. It's possible for a parallel
* operation such as mprotect or munmap to race between reclaim unmapping
* the page and flushing the page. If this race occurs, it potentially allows
* access to data via a stale TLB entry. Tracking all mm's that have TLB
* batching in flight would be expensive during reclaim so instead track
* whether TLB batching occurred in the past and if so then do a flush here
* if required. This will cost one additional flush per reclaim cycle paid
* by the first operation at risk such as mprotect and mumap.
*
* This must be called under the PTL so that an access to tlb_flush_batched
* that is potentially a "reclaim vs mprotect/munmap/etc" race will synchronise
* via the PTL.
*/
void flush_tlb_batched_pending(struct mm_struct *mm)
{
mm/rmap: fix potential batched TLB flush race In theory, the following race is possible for batched TLB flushing. CPU0 CPU1 ---- ---- shrink_page_list() unmap zap_pte_range() flush_tlb_batched_pending() flush_tlb_mm() try_to_unmap() set_tlb_ubc_flush_pending() mm->tlb_flush_batched = true mm->tlb_flush_batched = false After the TLB is flushed on CPU1 via flush_tlb_mm() and before mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and the TLB flushing is pended. Then the pended TLB flushing will be lost. Although both set_tlb_ubc_flush_pending() and flush_tlb_batched_pending() are called with PTL locked, different PTL instances may be used. Because the race window is really small, and the lost TLB flushing will cause problem only if a TLB entry is inserted before the unmapping in the race window, the race is only theoretical. But the fix is simple and cheap too. Syzbot has reported this too as follows: ================================================================== BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one write to 0xffff8881072cfbbc of 1 bytes by task 17406 on cpu 1: flush_tlb_batched_pending+0x5f/0x80 mm/rmap.c:691 madvise_free_pte_range+0xee/0x7d0 mm/madvise.c:594 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0x981/0x1160 mm/pagewalk.c:379 walk_page_range+0x131/0x300 mm/pagewalk.c:475 madvise_free_single_vma mm/madvise.c:734 [inline] madvise_dontneed_free mm/madvise.c:822 [inline] madvise_vma mm/madvise.c:996 [inline] do_madvise+0xe4a/0x1140 mm/madvise.c:1202 __do_sys_madvise mm/madvise.c:1228 [inline] __se_sys_madvise mm/madvise.c:1226 [inline] __x64_sys_madvise+0x5d/0x70 mm/madvise.c:1226 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0: set_tlb_ubc_flush_pending mm/rmap.c:636 [inline] try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515 rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301 try_to_unmap+0xec/0x110 shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719 shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394 shrink_list mm/vmscan.c:2621 [inline] shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940 shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129 shrink_node+0x8f6/0x1190 mm/vmscan.c:3252 kswapd_shrink_node mm/vmscan.c:4022 [inline] balance_pgdat+0x702/0xd30 mm/vmscan.c:4213 kswapd+0x200/0x340 mm/vmscan.c:4473 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ================================================================== [akpm@linux-foundation.org: tweak comments] Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:09:16 +00:00
int batch = atomic_read(&mm->tlb_flush_batched);
int pending = batch & TLB_FLUSH_BATCH_PENDING_MASK;
int flushed = batch >> TLB_FLUSH_BATCH_FLUSHED_SHIFT;
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
mm/rmap: fix potential batched TLB flush race In theory, the following race is possible for batched TLB flushing. CPU0 CPU1 ---- ---- shrink_page_list() unmap zap_pte_range() flush_tlb_batched_pending() flush_tlb_mm() try_to_unmap() set_tlb_ubc_flush_pending() mm->tlb_flush_batched = true mm->tlb_flush_batched = false After the TLB is flushed on CPU1 via flush_tlb_mm() and before mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and the TLB flushing is pended. Then the pended TLB flushing will be lost. Although both set_tlb_ubc_flush_pending() and flush_tlb_batched_pending() are called with PTL locked, different PTL instances may be used. Because the race window is really small, and the lost TLB flushing will cause problem only if a TLB entry is inserted before the unmapping in the race window, the race is only theoretical. But the fix is simple and cheap too. Syzbot has reported this too as follows: ================================================================== BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one write to 0xffff8881072cfbbc of 1 bytes by task 17406 on cpu 1: flush_tlb_batched_pending+0x5f/0x80 mm/rmap.c:691 madvise_free_pte_range+0xee/0x7d0 mm/madvise.c:594 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0x981/0x1160 mm/pagewalk.c:379 walk_page_range+0x131/0x300 mm/pagewalk.c:475 madvise_free_single_vma mm/madvise.c:734 [inline] madvise_dontneed_free mm/madvise.c:822 [inline] madvise_vma mm/madvise.c:996 [inline] do_madvise+0xe4a/0x1140 mm/madvise.c:1202 __do_sys_madvise mm/madvise.c:1228 [inline] __se_sys_madvise mm/madvise.c:1226 [inline] __x64_sys_madvise+0x5d/0x70 mm/madvise.c:1226 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0: set_tlb_ubc_flush_pending mm/rmap.c:636 [inline] try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515 rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301 try_to_unmap+0xec/0x110 shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719 shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394 shrink_list mm/vmscan.c:2621 [inline] shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940 shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129 shrink_node+0x8f6/0x1190 mm/vmscan.c:3252 kswapd_shrink_node mm/vmscan.c:4022 [inline] balance_pgdat+0x702/0xd30 mm/vmscan.c:4213 kswapd+0x200/0x340 mm/vmscan.c:4473 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ================================================================== [akpm@linux-foundation.org: tweak comments] Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:09:16 +00:00
if (pending != flushed) {
mm/tlbbatch: introduce arch_flush_tlb_batched_pending() Currently we'll flush the mm in flush_tlb_batched_pending() to avoid race between reclaim unmaps pages by batched TLB flush and mprotect/munmap/etc. Other architectures like arm64 may only need a synchronization barrier(dsb) here rather than a full mm flush. So add arch_flush_tlb_batched_pending() to allow an arch-specific implementation here. This intends no functional changes on x86 since still a full mm flush for x86. Link: https://lkml.kernel.org/r/20230717131004.12662-4-yangyicong@huawei.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Barry Song <v-songbaohua@oppo.com> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-17 13:10:03 +00:00
arch_flush_tlb_batched_pending(mm);
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
/*
mm/rmap: fix potential batched TLB flush race In theory, the following race is possible for batched TLB flushing. CPU0 CPU1 ---- ---- shrink_page_list() unmap zap_pte_range() flush_tlb_batched_pending() flush_tlb_mm() try_to_unmap() set_tlb_ubc_flush_pending() mm->tlb_flush_batched = true mm->tlb_flush_batched = false After the TLB is flushed on CPU1 via flush_tlb_mm() and before mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and the TLB flushing is pended. Then the pended TLB flushing will be lost. Although both set_tlb_ubc_flush_pending() and flush_tlb_batched_pending() are called with PTL locked, different PTL instances may be used. Because the race window is really small, and the lost TLB flushing will cause problem only if a TLB entry is inserted before the unmapping in the race window, the race is only theoretical. But the fix is simple and cheap too. Syzbot has reported this too as follows: ================================================================== BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one write to 0xffff8881072cfbbc of 1 bytes by task 17406 on cpu 1: flush_tlb_batched_pending+0x5f/0x80 mm/rmap.c:691 madvise_free_pte_range+0xee/0x7d0 mm/madvise.c:594 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0x981/0x1160 mm/pagewalk.c:379 walk_page_range+0x131/0x300 mm/pagewalk.c:475 madvise_free_single_vma mm/madvise.c:734 [inline] madvise_dontneed_free mm/madvise.c:822 [inline] madvise_vma mm/madvise.c:996 [inline] do_madvise+0xe4a/0x1140 mm/madvise.c:1202 __do_sys_madvise mm/madvise.c:1228 [inline] __se_sys_madvise mm/madvise.c:1226 [inline] __x64_sys_madvise+0x5d/0x70 mm/madvise.c:1226 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0: set_tlb_ubc_flush_pending mm/rmap.c:636 [inline] try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515 rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301 try_to_unmap+0xec/0x110 shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719 shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394 shrink_list mm/vmscan.c:2621 [inline] shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940 shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129 shrink_node+0x8f6/0x1190 mm/vmscan.c:3252 kswapd_shrink_node mm/vmscan.c:4022 [inline] balance_pgdat+0x702/0xd30 mm/vmscan.c:4213 kswapd+0x200/0x340 mm/vmscan.c:4473 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ================================================================== [akpm@linux-foundation.org: tweak comments] Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:09:16 +00:00
* If the new TLB flushing is pending during flushing, leave
* mm->tlb_flush_batched as is, to avoid losing flushing.
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
*/
mm/rmap: fix potential batched TLB flush race In theory, the following race is possible for batched TLB flushing. CPU0 CPU1 ---- ---- shrink_page_list() unmap zap_pte_range() flush_tlb_batched_pending() flush_tlb_mm() try_to_unmap() set_tlb_ubc_flush_pending() mm->tlb_flush_batched = true mm->tlb_flush_batched = false After the TLB is flushed on CPU1 via flush_tlb_mm() and before mm->tlb_flush_batched is set to false, some PTE is unmapped on CPU0 and the TLB flushing is pended. Then the pended TLB flushing will be lost. Although both set_tlb_ubc_flush_pending() and flush_tlb_batched_pending() are called with PTL locked, different PTL instances may be used. Because the race window is really small, and the lost TLB flushing will cause problem only if a TLB entry is inserted before the unmapping in the race window, the race is only theoretical. But the fix is simple and cheap too. Syzbot has reported this too as follows: ================================================================== BUG: KCSAN: data-race in flush_tlb_batched_pending / try_to_unmap_one write to 0xffff8881072cfbbc of 1 bytes by task 17406 on cpu 1: flush_tlb_batched_pending+0x5f/0x80 mm/rmap.c:691 madvise_free_pte_range+0xee/0x7d0 mm/madvise.c:594 walk_pmd_range mm/pagewalk.c:128 [inline] walk_pud_range mm/pagewalk.c:205 [inline] walk_p4d_range mm/pagewalk.c:240 [inline] walk_pgd_range mm/pagewalk.c:277 [inline] __walk_page_range+0x981/0x1160 mm/pagewalk.c:379 walk_page_range+0x131/0x300 mm/pagewalk.c:475 madvise_free_single_vma mm/madvise.c:734 [inline] madvise_dontneed_free mm/madvise.c:822 [inline] madvise_vma mm/madvise.c:996 [inline] do_madvise+0xe4a/0x1140 mm/madvise.c:1202 __do_sys_madvise mm/madvise.c:1228 [inline] __se_sys_madvise mm/madvise.c:1226 [inline] __x64_sys_madvise+0x5d/0x70 mm/madvise.c:1226 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff8881072cfbbc of 1 bytes by task 71 on cpu 0: set_tlb_ubc_flush_pending mm/rmap.c:636 [inline] try_to_unmap_one+0x60e/0x1220 mm/rmap.c:1515 rmap_walk_anon+0x2fb/0x470 mm/rmap.c:2301 try_to_unmap+0xec/0x110 shrink_page_list+0xe91/0x2620 mm/vmscan.c:1719 shrink_inactive_list+0x3fb/0x730 mm/vmscan.c:2394 shrink_list mm/vmscan.c:2621 [inline] shrink_lruvec+0x3c9/0x710 mm/vmscan.c:2940 shrink_node_memcgs+0x23e/0x410 mm/vmscan.c:3129 shrink_node+0x8f6/0x1190 mm/vmscan.c:3252 kswapd_shrink_node mm/vmscan.c:4022 [inline] balance_pgdat+0x702/0xd30 mm/vmscan.c:4213 kswapd+0x200/0x340 mm/vmscan.c:4473 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 71 Comm: kswapd0 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ================================================================== [akpm@linux-foundation.org: tweak comments] Link: https://lkml.kernel.org/r/20211201021104.126469-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: syzbot+aa5bebed695edaccf0df@syzkaller.appspotmail.com Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-14 22:09:16 +00:00
atomic_cmpxchg(&mm->tlb_flush_batched, batch,
pending | (pending << TLB_FLUSH_BATCH_FLUSHED_SHIFT));
mm, mprotect: flush TLB if potentially racing with a parallel reclaim leaving stale TLB entries Nadav Amit identified a theoritical race between page reclaim and mprotect due to TLB flushes being batched outside of the PTL being held. He described the race as follows: CPU0 CPU1 ---- ---- user accesses memory using RW PTE [PTE now cached in TLB] try_to_unmap_one() ==> ptep_get_and_clear() ==> set_tlb_ubc_flush_pending() mprotect(addr, PROT_READ) ==> change_pte_range() ==> [ PTE non-present - no flush ] user writes using cached RW PTE ... try_to_unmap_flush() The same type of race exists for reads when protecting for PROT_NONE and also exists for operations that can leave an old TLB entry behind such as munmap, mremap and madvise. For some operations like mprotect, it's not necessarily a data integrity issue but it is a correctness issue as there is a window where an mprotect that limits access still allows access. For munmap, it's potentially a data integrity issue although the race is massive as an munmap, mmap and return to userspace must all complete between the window when reclaim drops the PTL and flushes the TLB. However, it's theoritically possible so handle this issue by flushing the mm if reclaim is potentially currently batching TLB flushes. Other instances where a flush is required for a present pte should be ok as either the page lock is held preventing parallel reclaim or a page reference count is elevated preventing a parallel free leading to corruption. In the case of page_mkclean there isn't an obvious path that userspace could take advantage of without using the operations that are guarded by this patch. Other users such as gup as a race with reclaim looks just at PTEs. huge page variants should be ok as they don't race with reclaim. mincore only looks at PTEs. userfault also should be ok as if a parallel reclaim takes place, it will either fault the page back in or read some of the data before the flush occurs triggering a fault. Note that a variant of this patch was acked by Andy Lutomirski but this was for the x86 parts on top of his PCID work which didn't make the 4.13 merge window as expected. His ack is dropped from this version and there will be a follow-on patch on top of PCID that will include his ack. [akpm@linux-foundation.org: tweak comments] [akpm@linux-foundation.org: fix spello] Link: http://lkml.kernel.org/r/20170717155523.emckq2esjro6hf3z@suse.de Reported-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: <stable@vger.kernel.org> [v4.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-02 20:31:52 +00:00
}
}
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
#else
mm/tlbbatch: rename and extend some functions This patch does some preparation works to extend batched TLB flush to arm64. Including: - Extend set_tlb_ubc_flush_pending() and arch_tlbbatch_add_mm() to accept an additional argument for address, architectures like arm64 may need this for tlbi. - Rename arch_tlbbatch_add_mm() to arch_tlbbatch_add_pending() to match its current function since we don't need to handle mm on architectures like arm64 and add_mm is not proper, add_pending will make sense to both as on x86 we're pending the TLB flush operations while on arm64 we're pending the synchronize operations. This intends no functional changes on x86. Link: https://lkml.kernel.org/r/20230717131004.12662-3-yangyicong@huawei.com Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-17 13:10:02 +00:00
static void set_tlb_ubc_flush_pending(struct mm_struct *mm, pte_t pteval,
unsigned long uaddr)
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
{
}
static bool should_defer_flush(struct mm_struct *mm, enum ttu_flags flags)
{
return false;
}
#endif /* CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH */
/*
* At what user virtual address is page expected in vma?
* Caller should check the page is actually part of the vma.
*/
unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
{
struct folio *folio = page_folio(page);
if (folio_test_anon(folio)) {
struct anon_vma *page__anon_vma = folio_anon_vma(folio);
/*
* Note: swapoff's unuse_vma() is more efficient with this
* check, and needs it to match anon_vma when KSM is active.
*/
if (!vma->anon_vma || !page__anon_vma ||
vma->anon_vma->root != page__anon_vma->root)
return -EFAULT;
} else if (!vma->vm_file) {
return -EFAULT;
} else if (vma->vm_file->f_mapping != folio->mapping) {
return -EFAULT;
}
mm/thp: fix vma_address() if virtual address below file offset Running certain tests with a DEBUG_VM kernel would crash within hours, on the total_mapcount BUG() in split_huge_page_to_list(), while trying to free up some memory by punching a hole in a shmem huge page: split's try_to_unmap() was unable to find all the mappings of the page (which, on a !DEBUG_VM kernel, would then keep the huge page pinned in memory). When that BUG() was changed to a WARN(), it would later crash on the VM_BUG_ON_VMA(end < vma->vm_start || start >= vma->vm_end, vma) in mm/internal.h:vma_address(), used by rmap_walk_file() for try_to_unmap(). vma_address() is usually correct, but there's a wraparound case when the vm_start address is unusually low, but vm_pgoff not so low: vma_address() chooses max(start, vma->vm_start), but that decides on the wrong address, because start has become almost ULONG_MAX. Rewrite vma_address() to be more careful about vm_pgoff; move the VM_BUG_ON_VMA() out of it, returning -EFAULT for errors, so that it can be safely used from page_mapped_in_vma() and page_address_in_vma() too. Add vma_address_end() to apply similar care to end address calculation, in page_vma_mapped_walk() and page_mkclean_one() and try_to_unmap_one(); though it raises a question of whether callers would do better to supply pvmw->end to page_vma_mapped_walk() - I chose not, for a smaller patch. An irritation is that their apparent generality breaks down on KSM pages, which cannot be located by the page->index that page_to_pgoff() uses: as commit 4b0ece6fa016 ("mm: migrate: fix remove_migration_pte() for ksm pages") once discovered. I dithered over the best thing to do about that, and have ended up with a VM_BUG_ON_PAGE(PageKsm) in both vma_address() and vma_address_end(); though the only place in danger of using it on them was try_to_unmap_one(). Sidenote: vma_address() and vma_address_end() now use compound_nr() on a head page, instead of thp_size(): to make the right calculation on a hugetlbfs page, whether or not THPs are configured. try_to_unmap() is used on hugetlbfs pages, but perhaps the wrong calculation never mattered. Link: https://lkml.kernel.org/r/caf1c1a3-7cfb-7f8f-1beb-ba816e932825@google.com Fixes: a8fa41ad2f6f ("mm, rmap: check all VMAs that PTE-mapped THP can be part of") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:23:56 +00:00
return vma_address(page, vma);
}
mm/khugepaged: record SCAN_PMD_MAPPED when scan_pmd() finds hugepage When scanning an anon pmd to see if it's eligible for collapse, return SCAN_PMD_MAPPED if the pmd already maps a hugepage. Note that SCAN_PMD_MAPPED is different from SCAN_PAGE_COMPOUND used in the file-collapse path, since the latter might identify pte-mapped compound pages. This is required by MADV_COLLAPSE which necessarily needs to know what hugepage-aligned/sized regions are already pmd-mapped. In order to determine if a pmd already maps a hugepage, refactor mm_find_pmd(): Return mm_find_pmd() to it's pre-commit f72e7dcdd252 ("mm: let mm_find_pmd fix buggy race with THP fault") behavior. ksm was the only caller that explicitly wanted a pte-mapping pmd, so open code the pte-mapping logic there (pmd_present() and pmd_trans_huge() checks). Undo revert change in commit f72e7dcdd252 ("mm: let mm_find_pmd fix buggy race with THP fault") that open-coded split_huge_pmd_address() pmd lookup and use mm_find_pmd() instead. Link: https://lkml.kernel.org/r/20220706235936.2197195-9-zokeefe@google.com Signed-off-by: Zach O'Keefe <zokeefe@google.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Chris Kennelly <ckennelly@google.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com> Cc: SeongJae Park <sj@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-06 23:59:26 +00:00
/*
* Returns the actual pmd_t* where we expect 'address' to be mapped from, or
* NULL if it doesn't exist. No guarantees / checks on what the pmd_t*
* represents.
*/
pmd_t *mm_find_pmd(struct mm_struct *mm, unsigned long address)
{
pgd_t *pgd;
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd = NULL;
pgd = pgd_offset(mm, address);
if (!pgd_present(*pgd))
goto out;
p4d = p4d_offset(pgd, address);
if (!p4d_present(*p4d))
goto out;
pud = pud_offset(p4d, address);
if (!pud_present(*pud))
goto out;
pmd = pmd_offset(pud, address);
out:
return pmd;
}
struct folio_referenced_arg {
int mapcount;
int referenced;
unsigned long vm_flags;
struct mem_cgroup *memcg;
};
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
/*
* arg: folio_referenced_arg will be passed
*/
static bool folio_referenced_one(struct folio *folio,
struct vm_area_struct *vma, unsigned long address, void *arg)
{
struct folio_referenced_arg *pra = arg;
DEFINE_FOLIO_VMA_WALK(pvmw, folio, vma, address, 0);
int referenced = 0;
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
unsigned long start = address, ptes = 0;
while (page_vma_mapped_walk(&pvmw)) {
address = pvmw.address;
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
if (vma->vm_flags & VM_LOCKED) {
if (!folio_test_large(folio) || !pvmw.pte) {
/* Restore the mlock which got missed */
mlock_vma_folio(folio, vma);
page_vma_mapped_walk_done(&pvmw);
pra->vm_flags |= VM_LOCKED;
return false; /* To break the loop */
}
/*
* For large folio fully mapped to VMA, will
* be handled after the pvmw loop.
*
* For large folio cross VMA boundaries, it's
* expected to be picked by page reclaim. But
* should skip reference of pages which are in
* the range of VM_LOCKED vma. As page reclaim
* should just count the reference of pages out
* the range of VM_LOCKED vma.
*/
ptes++;
pra->mapcount--;
continue;
}
thp: transparent hugepage core Lately I've been working to make KVM use hugepages transparently without the usual restrictions of hugetlbfs. Some of the restrictions I'd like to see removed: 1) hugepages have to be swappable or the guest physical memory remains locked in RAM and can't be paged out to swap 2) if a hugepage allocation fails, regular pages should be allocated instead and mixed in the same vma without any failure and without userland noticing 3) if some task quits and more hugepages become available in the buddy, guest physical memory backed by regular pages should be relocated on hugepages automatically in regions under madvise(MADV_HUGEPAGE) (ideally event driven by waking up the kernel deamon if the order=HPAGE_PMD_SHIFT-PAGE_SHIFT list becomes not null) 4) avoidance of reservation and maximization of use of hugepages whenever possible. Reservation (needed to avoid runtime fatal faliures) may be ok for 1 machine with 1 database with 1 database cache with 1 database cache size known at boot time. It's definitely not feasible with a virtualization hypervisor usage like RHEV-H that runs an unknown number of virtual machines with an unknown size of each virtual machine with an unknown amount of pagecache that could be potentially useful in the host for guest not using O_DIRECT (aka cache=off). hugepages in the virtualization hypervisor (and also in the guest!) are much more important than in a regular host not using virtualization, becasue with NPT/EPT they decrease the tlb-miss cacheline accesses from 24 to 19 in case only the hypervisor uses transparent hugepages, and they decrease the tlb-miss cacheline accesses from 19 to 15 in case both the linux hypervisor and the linux guest both uses this patch (though the guest will limit the addition speedup to anonymous regions only for now...). Even more important is that the tlb miss handler is much slower on a NPT/EPT guest than for a regular shadow paging or no-virtualization scenario. So maximizing the amount of virtual memory cached by the TLB pays off significantly more with NPT/EPT than without (even if there would be no significant speedup in the tlb-miss runtime). The first (and more tedious) part of this work requires allowing the VM to handle anonymous hugepages mixed with regular pages transparently on regular anonymous vmas. This is what this patch tries to achieve in the least intrusive possible way. We want hugepages and hugetlb to be used in a way so that all applications can benefit without changes (as usual we leverage the KVM virtualization design: by improving the Linux VM at large, KVM gets the performance boost too). The most important design choice is: always fallback to 4k allocation if the hugepage allocation fails! This is the _very_ opposite of some large pagecache patches that failed with -EIO back then if a 64k (or similar) allocation failed... Second important decision (to reduce the impact of the feature on the existing pagetable handling code) is that at any time we can split an hugepage into 512 regular pages and it has to be done with an operation that can't fail. This way the reliability of the swapping isn't decreased (no need to allocate memory when we are short on memory to swap) and it's trivial to plug a split_huge_page* one-liner where needed without polluting the VM. Over time we can teach mprotect, mremap and friends to handle pmd_trans_huge natively without calling split_huge_page*. The fact it can't fail isn't just for swap: if split_huge_page would return -ENOMEM (instead of the current void) we'd need to rollback the mprotect from the middle of it (ideally including undoing the split_vma) which would be a big change and in the very wrong direction (it'd likely be simpler not to call split_huge_page at all and to teach mprotect and friends to handle hugepages instead of rolling them back from the middle). In short the very value of split_huge_page is that it can't fail. The collapsing and madvise(MADV_HUGEPAGE) part will remain separated and incremental and it'll just be an "harmless" addition later if this initial part is agreed upon. It also should be noted that locking-wise replacing regular pages with hugepages is going to be very easy if compared to what I'm doing below in split_huge_page, as it will only happen when page_count(page) matches page_mapcount(page) if we can take the PG_lock and mmap_sem in write mode. collapse_huge_page will be a "best effort" that (unlike split_huge_page) can fail at the minimal sign of trouble and we can try again later. collapse_huge_page will be similar to how KSM works and the madvise(MADV_HUGEPAGE) will work similar to madvise(MADV_MERGEABLE). The default I like is that transparent hugepages are used at page fault time. This can be changed with /sys/kernel/mm/transparent_hugepage/enabled. The control knob can be set to three values "always", "madvise", "never" which mean respectively that hugepages are always used, or only inside madvise(MADV_HUGEPAGE) regions, or never used. /sys/kernel/mm/transparent_hugepage/defrag instead controls if the hugepage allocation should defrag memory aggressively "always", only inside "madvise" regions, or "never". The pmd_trans_splitting/pmd_trans_huge locking is very solid. The put_page (from get_user_page users that can't use mmu notifier like O_DIRECT) that runs against a __split_huge_page_refcount instead was a pain to serialize in a way that would result always in a coherent page count for both tail and head. I think my locking solution with a compound_lock taken only after the page_first is valid and is still a PageHead should be safe but it surely needs review from SMP race point of view. In short there is no current existing way to serialize the O_DIRECT final put_page against split_huge_page_refcount so I had to invent a new one (O_DIRECT loses knowledge on the mapping status by the time gup_fast returns so...). And I didn't want to impact all gup/gup_fast users for now, maybe if we change the gup interface substantially we can avoid this locking, I admit I didn't think too much about it because changing the gup unpinning interface would be invasive. If we ignored O_DIRECT we could stick to the existing compound refcounting code, by simply adding a get_user_pages_fast_flags(foll_flags) where KVM (and any other mmu notifier user) would call it without FOLL_GET (and if FOLL_GET isn't set we'd just BUG_ON if nobody registered itself in the current task mmu notifier list yet). But O_DIRECT is fundamental for decent performance of virtualized I/O on fast storage so we can't avoid it to solve the race of put_page against split_huge_page_refcount to achieve a complete hugepage feature for KVM. Swap and oom works fine (well just like with regular pages ;). MMU notifier is handled transparently too, with the exception of the young bit on the pmd, that didn't have a range check but I think KVM will be fine because the whole point of hugepages is that EPT/NPT will also use a huge pmd when they notice gup returns pages with PageCompound set, so they won't care of a range and there's just the pmd young bit to check in that case. NOTE: in some cases if the L2 cache is small, this may slowdown and waste memory during COWs because 4M of memory are accessed in a single fault instead of 8k (the payoff is that after COW the program can run faster). So we might want to switch the copy_huge_page (and clear_huge_page too) to not temporal stores. I also extensively researched ways to avoid this cache trashing with a full prefault logic that would cow in 8k/16k/32k/64k up to 1M (I can send those patches that fully implemented prefault) but I concluded they're not worth it and they add an huge additional complexity and they remove all tlb benefits until the full hugepage has been faulted in, to save a little bit of memory and some cache during app startup, but they still don't improve substantially the cache-trashing during startup if the prefault happens in >4k chunks. One reason is that those 4k pte entries copied are still mapped on a perfectly cache-colored hugepage, so the trashing is the worst one can generate in those copies (cow of 4k page copies aren't so well colored so they trashes less, but again this results in software running faster after the page fault). Those prefault patches allowed things like a pte where post-cow pages were local 4k regular anon pages and the not-yet-cowed pte entries were pointing in the middle of some hugepage mapped read-only. If it doesn't payoff substantially with todays hardware it will payoff even less in the future with larger l2 caches, and the prefault logic would blot the VM a lot. If one is emebdded transparent_hugepage can be disabled during boot with sysfs or with the boot commandline parameter transparent_hugepage=0 (or transparent_hugepage=2 to restrict hugepages inside madvise regions) that will ensure not a single hugepage is allocated at boot time. It is simple enough to just disable transparent hugepage globally and let transparent hugepages be allocated selectively by applications in the MADV_HUGEPAGE region (both at page fault time, and if enabled with the collapse_huge_page too through the kernel daemon). This patch supports only hugepages mapped in the pmd, archs that have smaller hugepages will not fit in this patch alone. Also some archs like power have certain tlb limits that prevents mixing different page size in the same regions so they will not fit in this framework that requires "graceful fallback" to basic PAGE_SIZE in case of physical memory fragmentation. hugetlbfs remains a perfect fit for those because its software limits happen to match the hardware limits. hugetlbfs also remains a perfect fit for hugepage sizes like 1GByte that cannot be hoped to be found not fragmented after a certain system uptime and that would be very expensive to defragment with relocation, so requiring reservation. hugetlbfs is the "reservation way", the point of transparent hugepages is not to have any reservation at all and maximizing the use of cache and hugepages at all times automatically. Some performance result: vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largep ages3 memset page fault 1566023 memset tlb miss 453854 memset second tlb miss 453321 random access tlb miss 41635 random access second tlb miss 41658 vmx andrea # LD_PRELOAD=/usr/lib64/libhugetlbfs.so HUGETLB_MORECORE=yes HUGETLB_PATH=/mnt/huge/ ./largepages3 memset page fault 1566471 memset tlb miss 453375 memset second tlb miss 453320 random access tlb miss 41636 random access second tlb miss 41637 vmx andrea # ./largepages3 memset page fault 1566642 memset tlb miss 453417 memset second tlb miss 453313 random access tlb miss 41630 random access second tlb miss 41647 vmx andrea # ./largepages3 memset page fault 1566872 memset tlb miss 453418 memset second tlb miss 453315 random access tlb miss 41618 random access second tlb miss 41659 vmx andrea # echo 0 > /proc/sys/vm/transparent_hugepage vmx andrea # ./largepages3 memset page fault 2182476 memset tlb miss 460305 memset second tlb miss 460179 random access tlb miss 44483 random access second tlb miss 44186 vmx andrea # ./largepages3 memset page fault 2182791 memset tlb miss 460742 memset second tlb miss 459962 random access tlb miss 43981 random access second tlb miss 43988 ============ #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/time.h> #define SIZE (3UL*1024*1024*1024) int main() { char *p = malloc(SIZE), *p2; struct timeval before, after; gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset page fault %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); memset(p, 0, SIZE); gettimeofday(&after, NULL); printf("memset second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); gettimeofday(&before, NULL); for (p2 = p; p2 < p+SIZE; p2 += 4096) *p2 = 0; gettimeofday(&after, NULL); printf("random access second tlb miss %Lu\n", (after.tv_sec-before.tv_sec)*1000000UL + after.tv_usec-before.tv_usec); return 0; } ============ Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 23:46:52 +00:00
if (pvmw.pte) {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (lru_gen_enabled() &&
pte_young(ptep_get(pvmw.pte))) {
mm: multi-gen LRU: exploit locality in rmap Searching the rmap for PTEs mapping each page on an LRU list (to test and clear the accessed bit) can be expensive because pages from different VMAs (PA space) are not cache friendly to the rmap (VA space). For workloads mostly using mapped pages, searching the rmap can incur the highest CPU cost in the reclaim path. This patch exploits spatial locality to reduce the trips into the rmap. When shrink_page_list() walks the rmap and finds a young PTE, a new function lru_gen_look_around() scans at most BITS_PER_LONG-1 adjacent PTEs. On finding another young PTE, it clears the accessed bit and updates the gen counter of the page mapped by this PTE to (max_seq%MAX_NR_GENS)+1. Server benchmark results: Single workload: fio (buffered I/O): no change Single workload: memcached (anon): +[3, 5]% Ops/sec KB/sec patch1-6: 1106168.46 43025.04 patch1-7: 1147696.57 44640.29 Configurations: no change Client benchmark results: kswapd profiles: patch1-6 39.03% lzo1x_1_do_compress (real work) 18.47% page_vma_mapped_walk (overhead) 6.74% _raw_spin_unlock_irq 3.97% do_raw_spin_lock 2.49% ptep_clear_flush 2.48% anon_vma_interval_tree_iter_first 1.92% folio_referenced_one 1.88% __zram_bvec_write 1.48% memmove 1.31% vma_interval_tree_iter_next patch1-7 48.16% lzo1x_1_do_compress (real work) 8.20% page_vma_mapped_walk (overhead) 7.06% _raw_spin_unlock_irq 2.92% ptep_clear_flush 2.53% __zram_bvec_write 2.11% do_raw_spin_lock 2.02% memmove 1.93% lru_gen_look_around 1.56% free_unref_page_list 1.40% memset Configurations: no change Link: https://lkml.kernel.org/r/20220918080010.2920238-8-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Acked-by: Barry Song <baohua@kernel.org> Acked-by: Brian Geffon <bgeffon@google.com> Acked-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org> Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Steven Barrett <steven@liquorix.net> Acked-by: Suleiman Souhlal <suleiman@google.com> Tested-by: Daniel Byrne <djbyrne@mtu.edu> Tested-by: Donald Carr <d@chaos-reins.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Tested-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Tested-by: Shuang Zhai <szhai2@cs.rochester.edu> Tested-by: Sofia Trinh <sofia.trinh@edi.works> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michael Larabel <Michael@MichaelLarabel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-18 08:00:04 +00:00
lru_gen_look_around(&pvmw);
referenced++;
}
if (ptep_clear_flush_young_notify(vma, address,
mm: add vma_has_recency() Add vma_has_recency() to indicate whether a VMA may exhibit temporal locality that the LRU algorithm relies on. This function returns false for VMAs marked by VM_SEQ_READ or VM_RAND_READ. While the former flag indicates linear access, i.e., a special case of spatial locality, both flags indicate a lack of temporal locality, i.e., the reuse of an area within a relatively small duration. "Recency" is chosen over "locality" to avoid confusion between temporal and spatial localities. Before this patch, the active/inactive LRU only ignored the accessed bit from VMAs marked by VM_SEQ_READ. After this patch, the active/inactive LRU and MGLRU share the same logic: they both ignore the accessed bit if vma_has_recency() returns false. For the active/inactive LRU, the following fio test showed a [6, 8]% increase in IOPS when randomly accessing mapped files under memory pressure. kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo) kb=$((kb - 8*1024*1024)) modprobe brd rd_nr=1 rd_size=$kb dd if=/dev/zero of=/dev/ram0 bs=1M mkfs.ext4 /dev/ram0 mount /dev/ram0 /mnt/ swapoff -a fio --name=test --directory=/mnt/ --ioengine=mmap --numjobs=8 \ --size=8G --rw=randrw --time_based --runtime=10m \ --group_reporting The discussion that led to this patch is here [1]. Additional test results are available in that thread. [1] https://lore.kernel.org/r/Y31s%2FK8T85jh05wH@google.com/ Link: https://lkml.kernel.org/r/20221230215252.2628425-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Righi <andrea.righi@canonical.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michael Larabel <Michael@MichaelLarabel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-30 21:52:51 +00:00
pvmw.pte))
referenced++;
} else if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
if (pmdp_clear_flush_young_notify(vma, address,
pvmw.pmd))
referenced++;
} else {
/* unexpected pmd-mapped folio? */
WARN_ON_ONCE(1);
}
pra->mapcount--;
}
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
if ((vma->vm_flags & VM_LOCKED) &&
folio_test_large(folio) &&
folio_within_vma(folio, vma)) {
unsigned long s_align, e_align;
s_align = ALIGN_DOWN(start, PMD_SIZE);
e_align = ALIGN_DOWN(start + folio_size(folio) - 1, PMD_SIZE);
/* folio doesn't cross page table boundary and fully mapped */
if ((s_align == e_align) && (ptes == folio_nr_pages(folio))) {
/* Restore the mlock which got missed */
mlock_vma_folio(folio, vma);
pra->vm_flags |= VM_LOCKED;
return false; /* To break the loop */
}
}
mm: introduce idle page tracking Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
if (referenced)
folio_clear_idle(folio);
if (folio_test_clear_young(folio))
mm: introduce idle page tracking Knowing the portion of memory that is not used by a certain application or memory cgroup (idle memory) can be useful for partitioning the system efficiently, e.g. by setting memory cgroup limits appropriately. Currently, the only means to estimate the amount of idle memory provided by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the access bit for all pages mapped to a particular process by writing 1 to clear_refs, wait for some time, and then count smaps:Referenced. However, this method has two serious shortcomings: - it does not count unmapped file pages - it affects the reclaimer logic To overcome these drawbacks, this patch introduces two new page flags, Idle and Young, and a new sysfs file, /sys/kernel/mm/page_idle/bitmap. A page's Idle flag can only be set from userspace by setting bit in /sys/kernel/mm/page_idle/bitmap at the offset corresponding to the page, and it is cleared whenever the page is accessed either through page tables (it is cleared in page_referenced() in this case) or using the read(2) system call (mark_page_accessed()). Thus by setting the Idle flag for pages of a particular workload, which can be found e.g. by reading /proc/PID/pagemap, waiting for some time to let the workload access its working set, and then reading the bitmap file, one can estimate the amount of pages that are not used by the workload. The Young page flag is used to avoid interference with the memory reclaimer. A page's Young flag is set whenever the Access bit of a page table entry pointing to the page is cleared by writing to the bitmap file. If page_referenced() is called on a Young page, it will add 1 to its return value, therefore concealing the fact that the Access bit was cleared. Note, since there is no room for extra page flags on 32 bit, this feature uses extended page flags when compiled on 32 bit. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: kpageidle requires an MMU] [akpm@linux-foundation.org: decouple from page-flags rework] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Michel Lespinasse <walken@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-09 22:35:45 +00:00
referenced++;
if (referenced) {
pra->referenced++;
mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP 4.8 commit 7751b2da6be0 ("vmscan: split file huge pages before paging them out") inserted a split_huge_page_to_list() into shrink_page_list() without considering the mlock case: no problem if the page has already been marked as Mlocked (the !page_evictable check much higher up will have skipped all this), but it has always been the case that races or omissions in setting Mlocked can rely on page reclaim to detect this and correct it before actually reclaiming - and that remains so, but what a shame if a hugepage is needlessly split before discovering it. It is surprising that page_check_references() returns PAGEREF_RECLAIM when VM_LOCKED, but there was a good reason for that: try_to_unmap_one() is where the condition is detected and corrected; and until now it could not be done in page_referenced_one(), because that does not always have the page locked. Now that mlock's requirement for page lock has gone, copy try_to_unmap_one()'s mlock restoration into page_referenced_one(), and let page_check_references() return PAGEREF_ACTIVATE in this case. But page_referenced_one() may find a pte mapping one part of a hugepage: what hold should a pte mapped in a VM_LOCKED area exert over the entire huge page? That's debatable. The approach taken here is to treat that pte mapping in page_referenced_one() as if not VM_LOCKED, and if no VM_LOCKED pmd mapping is found later in the walk, and lack of reference permits, then PAGEREF_RECLAIM take it to attempted splitting as before. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:42:33 +00:00
pra->vm_flags |= vma->vm_flags & ~VM_LOCKED;
}
if (!pra->mapcount)
return false; /* To break the loop */
return true;
}
static bool invalid_folio_referenced_vma(struct vm_area_struct *vma, void *arg)
{
struct folio_referenced_arg *pra = arg;
struct mem_cgroup *memcg = pra->memcg;
mm: add vma_has_recency() Add vma_has_recency() to indicate whether a VMA may exhibit temporal locality that the LRU algorithm relies on. This function returns false for VMAs marked by VM_SEQ_READ or VM_RAND_READ. While the former flag indicates linear access, i.e., a special case of spatial locality, both flags indicate a lack of temporal locality, i.e., the reuse of an area within a relatively small duration. "Recency" is chosen over "locality" to avoid confusion between temporal and spatial localities. Before this patch, the active/inactive LRU only ignored the accessed bit from VMAs marked by VM_SEQ_READ. After this patch, the active/inactive LRU and MGLRU share the same logic: they both ignore the accessed bit if vma_has_recency() returns false. For the active/inactive LRU, the following fio test showed a [6, 8]% increase in IOPS when randomly accessing mapped files under memory pressure. kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo) kb=$((kb - 8*1024*1024)) modprobe brd rd_nr=1 rd_size=$kb dd if=/dev/zero of=/dev/ram0 bs=1M mkfs.ext4 /dev/ram0 mount /dev/ram0 /mnt/ swapoff -a fio --name=test --directory=/mnt/ --ioengine=mmap --numjobs=8 \ --size=8G --rw=randrw --time_based --runtime=10m \ --group_reporting The discussion that led to this patch is here [1]. Additional test results are available in that thread. [1] https://lore.kernel.org/r/Y31s%2FK8T85jh05wH@google.com/ Link: https://lkml.kernel.org/r/20221230215252.2628425-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Righi <andrea.righi@canonical.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michael Larabel <Michael@MichaelLarabel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-30 21:52:51 +00:00
/*
* Ignore references from this mapping if it has no recency. If the
* folio has been used in another mapping, we will catch it; if this
* other mapping is already gone, the unmap path will have set the
* referenced flag or activated the folio in zap_pte_range().
*/
if (!vma_has_recency(vma))
return true;
/*
* If we are reclaiming on behalf of a cgroup, skip counting on behalf
* of references from different cgroups.
*/
if (memcg && !mm_match_cgroup(vma->vm_mm, memcg))
return true;
return false;
}
/**
* folio_referenced() - Test if the folio was referenced.
* @folio: The folio to test.
* @is_locked: Caller holds lock on the folio.
* @memcg: target memory cgroup
* @vm_flags: A combination of all the vma->vm_flags which referenced the folio.
*
* Quick test_and_clear_referenced for all mappings of a folio,
*
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
* Return: The number of mappings which referenced the folio. Return -1 if
* the function bailed out due to rmap lock contention.
*/
int folio_referenced(struct folio *folio, int is_locked,
struct mem_cgroup *memcg, unsigned long *vm_flags)
{
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
int we_locked = 0;
struct folio_referenced_arg pra = {
.mapcount = folio_mapcount(folio),
.memcg = memcg,
};
struct rmap_walk_control rwc = {
.rmap_one = folio_referenced_one,
.arg = (void *)&pra,
.anon_lock = folio_lock_anon_vma_read,
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
.try_lock = true,
mm: add vma_has_recency() Add vma_has_recency() to indicate whether a VMA may exhibit temporal locality that the LRU algorithm relies on. This function returns false for VMAs marked by VM_SEQ_READ or VM_RAND_READ. While the former flag indicates linear access, i.e., a special case of spatial locality, both flags indicate a lack of temporal locality, i.e., the reuse of an area within a relatively small duration. "Recency" is chosen over "locality" to avoid confusion between temporal and spatial localities. Before this patch, the active/inactive LRU only ignored the accessed bit from VMAs marked by VM_SEQ_READ. After this patch, the active/inactive LRU and MGLRU share the same logic: they both ignore the accessed bit if vma_has_recency() returns false. For the active/inactive LRU, the following fio test showed a [6, 8]% increase in IOPS when randomly accessing mapped files under memory pressure. kb=$(awk '/MemTotal/ { print $2 }' /proc/meminfo) kb=$((kb - 8*1024*1024)) modprobe brd rd_nr=1 rd_size=$kb dd if=/dev/zero of=/dev/ram0 bs=1M mkfs.ext4 /dev/ram0 mount /dev/ram0 /mnt/ swapoff -a fio --name=test --directory=/mnt/ --ioengine=mmap --numjobs=8 \ --size=8G --rw=randrw --time_based --runtime=10m \ --group_reporting The discussion that led to this patch is here [1]. Additional test results are available in that thread. [1] https://lore.kernel.org/r/Y31s%2FK8T85jh05wH@google.com/ Link: https://lkml.kernel.org/r/20221230215252.2628425-1-yuzhao@google.com Signed-off-by: Yu Zhao <yuzhao@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Righi <andrea.righi@canonical.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michael Larabel <Michael@MichaelLarabel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-30 21:52:51 +00:00
.invalid_vma = invalid_folio_referenced_vma,
};
*vm_flags = 0;
if (!pra.mapcount)
return 0;
if (!folio_raw_mapping(folio))
return 0;
if (!is_locked && (!folio_test_anon(folio) || folio_test_ksm(folio))) {
we_locked = folio_trylock(folio);
if (!we_locked)
return 1;
}
rmap_walk(folio, &rwc);
*vm_flags = pra.vm_flags;
if (we_locked)
folio_unlock(folio);
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
return rwc.contended ? -1 : pra.referenced;
}
static int page_vma_mkclean_one(struct page_vma_mapped_walk *pvmw)
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
{
int cleaned = 0;
struct vm_area_struct *vma = pvmw->vma;
struct mmu_notifier_range range;
unsigned long address = pvmw->address;
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
/*
* We have to assume the worse case ie pmd for invalidation. Note that
* the folio can not be freed from this function.
*/
mmu_notifier_range_init(&range, MMU_NOTIFY_PROTECTION_PAGE, 0,
vma->vm_mm, address, vma_address_end(pvmw));
mmu_notifier_invalidate_range_start(&range);
while (page_vma_mapped_walk(pvmw)) {
int ret = 0;
address = pvmw->address;
if (pvmw->pte) {
pte_t *pte = pvmw->pte;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t entry = ptep_get(pte);
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
if (!pte_dirty(entry) && !pte_write(entry))
continue;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
flush_cache_page(vma, address, pte_pfn(entry));
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
entry = ptep_clear_flush(vma, address, pte);
entry = pte_wrprotect(entry);
entry = pte_mkclean(entry);
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
set_pte_at(vma->vm_mm, address, pte, entry);
ret = 1;
} else {
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
pmd_t *pmd = pvmw->pmd;
pmd_t entry;
if (!pmd_dirty(*pmd) && !pmd_write(*pmd))
continue;
mm: rmap: fix cache flush on THP pages Patch series "Fix some bugs related to ramp and dax", v7. Patch 1-2 fix a cache flush bug, because subsequent patches depend on those on those changes, there are placed in this series. Patch 3-4 are preparation for fixing a dax bug in patch 5. Patch 6 is code cleanup since the previous patch removes the usage of follow_invalidate_pte(). This patch (of 6): The flush_cache_page() only remove a PAGE_SIZE sized range from the cache. However, it does not cover the full pages in a THP except a head page. Replace it with flush_cache_range() to fix this issue. At least, no problems were found due to this. Maybe because the architectures that have virtual indexed caches is less. Link: https://lkml.kernel.org/r/20220403053957.10770-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220403053957.10770-2-songmuchun@bytedance.com Fixes: f27176cfc363 ("mm: convert page_mkclean_one() to use page_vma_mapped_walk()") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alistair Popple <apopple@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Hugh Dickins <hughd@google.com> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-04-29 06:16:09 +00:00
flush_cache_range(vma, address,
address + HPAGE_PMD_SIZE);
mm: page_mkclean vs MADV_DONTNEED race MADV_DONTNEED is handled with mmap_sem taken in read mode. We call page_mkclean without holding mmap_sem. MADV_DONTNEED implies that pages in the region are unmapped and subsequent access to the pages in that range is handled as a new page fault. This implies that if we don't have parallel access to the region when MADV_DONTNEED is run we expect those range to be unallocated. w.r.t page_mkclean() we need to make sure that we don't break the MADV_DONTNEED semantics. MADV_DONTNEED check for pmd_none without holding pmd_lock. This implies we skip the pmd if we temporarily mark pmd none. Avoid doing that while marking the page clean. Keep the sequence same for dax too even though we don't support MADV_DONTNEED for dax mapping The bug was noticed by code review and I didn't observe any failures w.r.t test run. This is similar to commit 58ceeb6bec86d9140f9d91d71a710e963523d063 Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Thu Apr 13 14:56:26 2017 -0700 thp: fix MADV_DONTNEED vs. MADV_FREE race commit ced108037c2aa542b3ed8b7afd1576064ad1362a Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Date: Thu Apr 13 14:56:20 2017 -0700 thp: fix MADV_DONTNEED vs. numa balancing race Link: http://lkml.kernel.org/r/20190321040610.14226-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc:"Kirill A . Shutemov" <kirill@shutemov.name> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 00:19:11 +00:00
entry = pmdp_invalidate(vma, address, pmd);
entry = pmd_wrprotect(entry);
entry = pmd_mkclean(entry);
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
set_pmd_at(vma->vm_mm, address, pmd, entry);
ret = 1;
#else
/* unexpected pmd-mapped folio? */
WARN_ON_ONCE(1);
#endif
}
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
mm/mmu_notifier: avoid double notification when it is useless This patch only affects users of mmu_notifier->invalidate_range callback which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ... and it is an optimization for those users. Everyone else is unaffected by it. When clearing a pte/pmd we are given a choice to notify the event under the page table lock (notify version of *_clear_flush helpers do call the mmu_notifier_invalidate_range). But that notification is not necessary in all cases. This patch removes almost all cases where it is useless to have a call to mmu_notifier_invalidate_range before mmu_notifier_invalidate_range_end. It also adds documentation in all those cases explaining why. Below is a more in depth analysis of why this is fine to do this: For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when device use thing like ATS/PASID to get the IOMMU to walk the CPU page table to access a process virtual address space). There is only 2 cases when you need to notify those secondary TLB while holding page table lock when clearing a pte/pmd: A) page backing address is free before mmu_notifier_invalidate_range_end B) a page table entry is updated to point to a new page (COW, write fault on zero page, __replace_page(), ...) Case A is obvious you do not want to take the risk for the device to write to a page that might now be used by something completely different. Case B is more subtle. For correctness it requires the following sequence to happen: - take page table lock - clear page table entry and notify (pmd/pte_huge_clear_flush_notify()) - set page table entry to point to new page If clearing the page table entry is not followed by a notify before setting the new pte/pmd value then you can break memory model like C11 or C++11 for the device. Consider the following scenario (device use a feature similar to ATS/ PASID): Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we assume they are write protected for COW (other case of B apply too). [Time N] ----------------------------------------------------------------- CPU-thread-0 {try to write to addrA} CPU-thread-1 {try to write to addrB} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA and populate device TLB} DEV-thread-2 {read addrB and populate device TLB} [Time N+1] --------------------------------------------------------------- CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+2] --------------------------------------------------------------- CPU-thread-0 {COW_step1: {update page table point to new page for addrA}} CPU-thread-1 {COW_step1: {update page table point to new page for addrB}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {write to addrA which is a write to new page} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {} CPU-thread-3 {write to addrB which is a write to new page} DEV-thread-0 {} DEV-thread-2 {} [Time N+4] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+5] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA from old page} DEV-thread-2 {read addrB from new page} So here because at time N+2 the clear page table entry was not pair with a notification to invalidate the secondary TLB, the device see the new value for addrB before seing the new value for addrA. This break total memory ordering for the device. When changing a pte to write protect or to point to a new write protected page with same content (KSM) it is ok to delay invalidate_range callback to mmu_notifier_invalidate_range_end() outside the page table lock. This is true even if the thread doing page table update is preempted right after releasing page table lock before calling mmu_notifier_invalidate_range_end Thanks to Andrea for thinking of a problematic scenario for COW. [jglisse@redhat.com: v2] Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alistair Popple <alistair@popple.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:34:07 +00:00
if (ret)
cleaned++;
}
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
mmu_notifier_invalidate_range_end(&range);
return cleaned;
}
static bool page_mkclean_one(struct folio *folio, struct vm_area_struct *vma,
unsigned long address, void *arg)
{
DEFINE_FOLIO_VMA_WALK(pvmw, folio, vma, address, PVMW_SYNC);
int *cleaned = arg;
*cleaned += page_vma_mkclean_one(&pvmw);
return true;
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
}
static bool invalid_mkclean_vma(struct vm_area_struct *vma, void *arg)
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
{
if (vma->vm_flags & VM_SHARED)
return false;
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
return true;
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
}
int folio_mkclean(struct folio *folio)
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
{
int cleaned = 0;
struct address_space *mapping;
struct rmap_walk_control rwc = {
.arg = (void *)&cleaned,
.rmap_one = page_mkclean_one,
.invalid_vma = invalid_mkclean_vma,
};
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
BUG_ON(!folio_test_locked(folio));
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
if (!folio_mapped(folio))
return 0;
mapping = folio_mapping(folio);
if (!mapping)
return 0;
rmap_walk(folio, &rwc);
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
return cleaned;
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
}
EXPORT_SYMBOL_GPL(folio_mkclean);
[PATCH] mm: tracking shared dirty pages Tracking of dirty pages in shared writeable mmap()s. The idea is simple: write protect clean shared writeable pages, catch the write-fault, make writeable and set dirty. On page write-back clean all the PTE dirty bits and write protect them once again. The implementation is a tad harder, mainly because the default backing_dev_info capabilities were too loosely maintained. Hence it is not enough to test the backing_dev_info for cap_account_dirty. The current heuristic is as follows, a VMA is eligible when: - its shared writeable (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED) - it is not a 'special' mapping (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0 - the backing_dev_info is cap_account_dirty mapping_cap_account_dirty(vma->vm_file->f_mapping) - f_op->mmap() didn't change the default page protection Page from remap_pfn_range() are explicitly excluded because their COW semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and because they don't have a backing store anyway. mprotect() is taught about the new behaviour as well. However it overrides the last condition. Cleaning the pages on write-back is done with page_mkclean() a new rmap call. It can be called on any page, but is currently only implemented for mapped pages, if the page is found the be of a VMA that accounts dirty pages it will also wrprotect the PTE. Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from under ->private_lock. This seems to be safe, since ->private_lock is used to serialize access to the buffers, not the page itself. This is needed because clear_page_dirty() will call into page_mkclean() and would thereby violate locking order. [dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 06:30:57 +00:00
/**
* pfn_mkclean_range - Cleans the PTEs (including PMDs) mapped with range of
* [@pfn, @pfn + @nr_pages) at the specific offset (@pgoff)
* within the @vma of shared mappings. And since clean PTEs
* should also be readonly, write protects them too.
* @pfn: start pfn.
* @nr_pages: number of physically contiguous pages srarting with @pfn.
* @pgoff: page offset that the @pfn mapped with.
* @vma: vma that @pfn mapped within.
*
* Returns the number of cleaned PTEs (including PMDs).
*/
int pfn_mkclean_range(unsigned long pfn, unsigned long nr_pages, pgoff_t pgoff,
struct vm_area_struct *vma)
{
struct page_vma_mapped_walk pvmw = {
.pfn = pfn,
.nr_pages = nr_pages,
.pgoff = pgoff,
.vma = vma,
.flags = PVMW_SYNC,
};
if (invalid_mkclean_vma(vma, NULL))
return 0;
pvmw.address = vma_pgoff_address(pgoff, nr_pages, vma);
VM_BUG_ON_VMA(pvmw.address == -EFAULT, vma);
return page_vma_mkclean_one(&pvmw);
}
int folio_total_mapcount(struct folio *folio)
mm,thp,rmap: simplify compound page mapcount handling Compound page (folio) mapcount calculations have been different for anon and file (or shmem) THPs, and involved the obscure PageDoubleMap flag. And each huge mapping and unmapping of a file (or shmem) THP involved atomically incrementing and decrementing the mapcount of every subpage of that huge page, dirtying many struct page cachelines. Add subpages_mapcount field to the struct folio and first tail page, so that the total of subpage mapcounts is available in one place near the head: then page_mapcount() and total_mapcount() and page_mapped(), and their folio equivalents, are so quick that anon and file and hugetlb don't need to be optimized differently. Delete the unloved PageDoubleMap. page_add and page_remove rmap functions must now maintain the subpages_mapcount as well as the subpage _mapcount, when dealing with pte mappings of huge pages; and correct maintenance of NR_ANON_MAPPED and NR_FILE_MAPPED statistics still needs reading through the subpages, using nr_subpages_unmapped() - but only when first or last pmd mapping finds subpages_mapcount raised (double-map case, not the common case). But are those counts (used to decide when to split an anon THP, and in vmscan's pagecache_reclaimable heuristic) correctly maintained? Not quite: since page_remove_rmap() (and also split_huge_pmd()) is often called without page lock, there can be races when a subpage pte mapcount 0<->1 while compound pmd mapcount 0<->1 is scanning - races which the previous implementation had prevented. The statistics might become inaccurate, and even drift down until they underflow through 0. That is not good enough, but is better dealt with in a followup patch. Update a few comments on first and second tail page overlaid fields. hugepage_add_new_anon_rmap() has to "increment" compound_mapcount, but subpages_mapcount and compound_pincount are already correctly at 0, so delete its reinitialization of compound_pincount. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 119 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 92ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. But there might be some benchmarks which would show a slowdown, because tail struct pages now fall out of cache until final freeing checks them. Link: https://lkml.kernel.org/r/47ad693-717-79c8-e1ba-46c3a6602e48@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:51:38 +00:00
{
int mapcount = folio_entire_mapcount(folio);
int nr_pages;
mm,thp,rmap: simplify compound page mapcount handling Compound page (folio) mapcount calculations have been different for anon and file (or shmem) THPs, and involved the obscure PageDoubleMap flag. And each huge mapping and unmapping of a file (or shmem) THP involved atomically incrementing and decrementing the mapcount of every subpage of that huge page, dirtying many struct page cachelines. Add subpages_mapcount field to the struct folio and first tail page, so that the total of subpage mapcounts is available in one place near the head: then page_mapcount() and total_mapcount() and page_mapped(), and their folio equivalents, are so quick that anon and file and hugetlb don't need to be optimized differently. Delete the unloved PageDoubleMap. page_add and page_remove rmap functions must now maintain the subpages_mapcount as well as the subpage _mapcount, when dealing with pte mappings of huge pages; and correct maintenance of NR_ANON_MAPPED and NR_FILE_MAPPED statistics still needs reading through the subpages, using nr_subpages_unmapped() - but only when first or last pmd mapping finds subpages_mapcount raised (double-map case, not the common case). But are those counts (used to decide when to split an anon THP, and in vmscan's pagecache_reclaimable heuristic) correctly maintained? Not quite: since page_remove_rmap() (and also split_huge_pmd()) is often called without page lock, there can be races when a subpage pte mapcount 0<->1 while compound pmd mapcount 0<->1 is scanning - races which the previous implementation had prevented. The statistics might become inaccurate, and even drift down until they underflow through 0. That is not good enough, but is better dealt with in a followup patch. Update a few comments on first and second tail page overlaid fields. hugepage_add_new_anon_rmap() has to "increment" compound_mapcount, but subpages_mapcount and compound_pincount are already correctly at 0, so delete its reinitialization of compound_pincount. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 119 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 92ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. But there might be some benchmarks which would show a slowdown, because tail struct pages now fall out of cache until final freeing checks them. Link: https://lkml.kernel.org/r/47ad693-717-79c8-e1ba-46c3a6602e48@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:51:38 +00:00
int i;
/* In the common case, avoid the loop when no pages mapped by PTE */
if (folio_nr_pages_mapped(folio) == 0)
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
return mapcount;
/*
* Add all the PTE mappings of those pages mapped by PTE.
* Limit the loop to folio_nr_pages_mapped()?
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
* Perhaps: given all the raciness, that may be a good or a bad idea.
*/
nr_pages = folio_nr_pages(folio);
for (i = 0; i < nr_pages; i++)
mapcount += atomic_read(&folio_page(folio, i)->_mapcount);
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
/* But each of those _mapcounts was based on -1 */
mapcount += nr_pages;
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
return mapcount;
mm,thp,rmap: simplify compound page mapcount handling Compound page (folio) mapcount calculations have been different for anon and file (or shmem) THPs, and involved the obscure PageDoubleMap flag. And each huge mapping and unmapping of a file (or shmem) THP involved atomically incrementing and decrementing the mapcount of every subpage of that huge page, dirtying many struct page cachelines. Add subpages_mapcount field to the struct folio and first tail page, so that the total of subpage mapcounts is available in one place near the head: then page_mapcount() and total_mapcount() and page_mapped(), and their folio equivalents, are so quick that anon and file and hugetlb don't need to be optimized differently. Delete the unloved PageDoubleMap. page_add and page_remove rmap functions must now maintain the subpages_mapcount as well as the subpage _mapcount, when dealing with pte mappings of huge pages; and correct maintenance of NR_ANON_MAPPED and NR_FILE_MAPPED statistics still needs reading through the subpages, using nr_subpages_unmapped() - but only when first or last pmd mapping finds subpages_mapcount raised (double-map case, not the common case). But are those counts (used to decide when to split an anon THP, and in vmscan's pagecache_reclaimable heuristic) correctly maintained? Not quite: since page_remove_rmap() (and also split_huge_pmd()) is often called without page lock, there can be races when a subpage pte mapcount 0<->1 while compound pmd mapcount 0<->1 is scanning - races which the previous implementation had prevented. The statistics might become inaccurate, and even drift down until they underflow through 0. That is not good enough, but is better dealt with in a followup patch. Update a few comments on first and second tail page overlaid fields. hugepage_add_new_anon_rmap() has to "increment" compound_mapcount, but subpages_mapcount and compound_pincount are already correctly at 0, so delete its reinitialization of compound_pincount. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 119 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 92ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. But there might be some benchmarks which would show a slowdown, because tail struct pages now fall out of cache until final freeing checks them. Link: https://lkml.kernel.org/r/47ad693-717-79c8-e1ba-46c3a6602e48@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:51:38 +00:00
}
/**
* folio_move_anon_rmap - move a folio to our anon_vma
* @folio: The folio to move to our anon_vma
* @vma: The vma the folio belongs to
*
* When a folio belongs exclusively to one process after a COW event,
* that folio can be moved into the anon_vma that belongs to just that
* process, so the rmap code will not search the parent or sibling processes.
*/
void folio_move_anon_rmap(struct folio *folio, struct vm_area_struct *vma)
{
void *anon_vma = vma->anon_vma;
mm: thp: refix false positive BUG in page_move_anon_rmap() The VM_BUG_ON_PAGE in page_move_anon_rmap() is more trouble than it's worth: the syzkaller fuzzer hit it again. It's still wrong for some THP cases, because linear_page_index() was never intended to apply to addresses before the start of a vma. That's easily fixed with a signed long cast inside linear_page_index(); and Dmitry has tested such a patch, to verify the false positive. But why extend linear_page_index() just for this case? when the avoidance in page_move_anon_rmap() has already grown ugly, and there's no reason for the check at all (nothing else there is using address or index). Remove address arg from page_move_anon_rmap(), remove VM_BUG_ON_PAGE, remove CONFIG_DEBUG_VM PageTransHuge adjustment. And one more thing: should the compound_head(page) be done inside or outside page_move_anon_rmap()? It's usually pushed down to the lowest level nowadays (and mm/memory.c shows no other explicit use of it), so I think it's better done in page_move_anon_rmap() than by caller. Fixes: 0798d3c022dc ("mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap()") Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1607120444540.12528@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-14 19:07:38 +00:00
VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio);
VM_BUG_ON_VMA(!anon_vma, vma);
anon_vma += PAGE_MAPPING_ANON;
rmap: fix theoretical race between do_wp_page and shrink_active_list As noted by Paul the compiler is free to store a temporary result in a variable on stack, heap or global unless it is explicitly marked as volatile, see: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4455.html#sample-optimizations This can result in a race between do_wp_page() and shrink_active_list() as follows. In do_wp_page() we can call page_move_anon_rmap(), which sets page->mapping as follows: anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON; page->mapping = (struct address_space *) anon_vma; The page in question may be on an LRU list, because nowhere in do_wp_page() we remove it from the list, neither do we take any LRU related locks. Although the page is locked, shrink_active_list() can still call page_referenced() on it concurrently, because the latter does not require an anonymous page to be locked: CPU0 CPU1 ---- ---- do_wp_page shrink_active_list lock_page page_referenced PageAnon->yes, so skip trylock_page page_move_anon_rmap page->mapping = anon_vma rmap_walk PageAnon->no rmap_walk_file BUG page->mapping += PAGE_MAPPING_ANON This patch fixes this race by explicitly forbidding the compiler to split page->mapping store in page_move_anon_rmap() with the aid of WRITE_ONCE. [akpm@linux-foundation.org: tweak comment, per Minchan] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:56:56 +00:00
/*
* Ensure that anon_vma and the PAGE_MAPPING_ANON bit are written
* simultaneously, so a concurrent reader (eg folio_referenced()'s
* folio_test_anon()) will not see one without the other.
rmap: fix theoretical race between do_wp_page and shrink_active_list As noted by Paul the compiler is free to store a temporary result in a variable on stack, heap or global unless it is explicitly marked as volatile, see: http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/n4455.html#sample-optimizations This can result in a race between do_wp_page() and shrink_active_list() as follows. In do_wp_page() we can call page_move_anon_rmap(), which sets page->mapping as follows: anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON; page->mapping = (struct address_space *) anon_vma; The page in question may be on an LRU list, because nowhere in do_wp_page() we remove it from the list, neither do we take any LRU related locks. Although the page is locked, shrink_active_list() can still call page_referenced() on it concurrently, because the latter does not require an anonymous page to be locked: CPU0 CPU1 ---- ---- do_wp_page shrink_active_list lock_page page_referenced PageAnon->yes, so skip trylock_page page_move_anon_rmap page->mapping = anon_vma rmap_walk PageAnon->no rmap_walk_file BUG page->mapping += PAGE_MAPPING_ANON This patch fixes this race by explicitly forbidding the compiler to split page->mapping store in page_move_anon_rmap() with the aid of WRITE_ONCE. [akpm@linux-foundation.org: tweak comment, per Minchan] Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Hugh Dickins <hughd@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24 23:56:56 +00:00
*/
WRITE_ONCE(folio->mapping, anon_vma);
}
/**
* __folio_set_anon - set up a new anonymous rmap for a folio
* @folio: The folio to set up the new anonymous rmap for.
* @vma: VM area to add the folio to.
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
* @address: User virtual address of the mapping
* @exclusive: Whether the folio is exclusive to the process.
*/
static void __folio_set_anon(struct folio *folio, struct vm_area_struct *vma,
unsigned long address, bool exclusive)
{
struct anon_vma *anon_vma = vma->anon_vma;
anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma Otherwise we might be mapping in a page in a new mapping, but that page (through the swapcache) would later be mapped into an old mapping too. The page->mapping must be the case that works for everybody, not just the mapping that happened to page it in first. Here's the scenario: - page gets allocated/mapped by process A. Let's call the anon_vma we associate the page with 'A' to keep it easy to track. - Process A forks, creating process B. The anon_vma in B is 'B', and has a chain that looks like 'B' -> 'A'. Everything is fine. - Swapping happens. The page (with mapping pointing to 'A') gets swapped out (perhaps not to disk - it's enough to assume that it's just not mapped any more, and lives entirely in the swap-cache) - Process B pages it in, which goes like this: do_swap_page -> page = lookup_swap_cache(entry); ... set_pte_at(mm, address, page_table, pte); page_add_anon_rmap(page, vma, address); And think about what happens here! In particular, what happens is that this will now be the "first" mapping of that page, so page_add_anon_rmap() used to do if (first) __page_set_anon_rmap(page, vma, address); and notice what anon_vma it will use? It will use the anon_vma for process B! What happens then? Trivial: process 'A' also pages it in (nothing happens, it's not the first mapping), and then process 'B' execve's or exits or unmaps, making anon_vma B go away. End result: process A has a page that points to anon_vma B, but anon_vma B does not exist any more. This can go on forever. Forget about RCU grace periods, forget about locking, forget anything like that. The bug is simply that page->mapping points to an anon_vma that was correct at one point, but was _not_ the one that was shared by all users of that possible mapping. Changing it to always use the deepest anon_vma in the anonvma chain gets us to the safest model. This can be improved in certain cases: if we know the page is private to just this particular mapping (for example, it's a new page, or it is the only swapcache entry), we could pick the top (most specific) anon_vma. But that's a future optimization. Make it _work_ reliably first. Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12 19:44:29 +00:00
BUG_ON(!anon_vma);
anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma Otherwise we might be mapping in a page in a new mapping, but that page (through the swapcache) would later be mapped into an old mapping too. The page->mapping must be the case that works for everybody, not just the mapping that happened to page it in first. Here's the scenario: - page gets allocated/mapped by process A. Let's call the anon_vma we associate the page with 'A' to keep it easy to track. - Process A forks, creating process B. The anon_vma in B is 'B', and has a chain that looks like 'B' -> 'A'. Everything is fine. - Swapping happens. The page (with mapping pointing to 'A') gets swapped out (perhaps not to disk - it's enough to assume that it's just not mapped any more, and lives entirely in the swap-cache) - Process B pages it in, which goes like this: do_swap_page -> page = lookup_swap_cache(entry); ... set_pte_at(mm, address, page_table, pte); page_add_anon_rmap(page, vma, address); And think about what happens here! In particular, what happens is that this will now be the "first" mapping of that page, so page_add_anon_rmap() used to do if (first) __page_set_anon_rmap(page, vma, address); and notice what anon_vma it will use? It will use the anon_vma for process B! What happens then? Trivial: process 'A' also pages it in (nothing happens, it's not the first mapping), and then process 'B' execve's or exits or unmaps, making anon_vma B go away. End result: process A has a page that points to anon_vma B, but anon_vma B does not exist any more. This can go on forever. Forget about RCU grace periods, forget about locking, forget anything like that. The bug is simply that page->mapping points to an anon_vma that was correct at one point, but was _not_ the one that was shared by all users of that possible mapping. Changing it to always use the deepest anon_vma in the anonvma chain gets us to the safest model. This can be improved in certain cases: if we know the page is private to just this particular mapping (for example, it's a new page, or it is the only swapcache entry), we could pick the top (most specific) anon_vma. But that's a future optimization. Make it _work_ reliably first. Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12 19:44:29 +00:00
/*
* If the folio isn't exclusive to this vma, we must use the _oldest_
* possible anon_vma for the folio mapping!
anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma Otherwise we might be mapping in a page in a new mapping, but that page (through the swapcache) would later be mapped into an old mapping too. The page->mapping must be the case that works for everybody, not just the mapping that happened to page it in first. Here's the scenario: - page gets allocated/mapped by process A. Let's call the anon_vma we associate the page with 'A' to keep it easy to track. - Process A forks, creating process B. The anon_vma in B is 'B', and has a chain that looks like 'B' -> 'A'. Everything is fine. - Swapping happens. The page (with mapping pointing to 'A') gets swapped out (perhaps not to disk - it's enough to assume that it's just not mapped any more, and lives entirely in the swap-cache) - Process B pages it in, which goes like this: do_swap_page -> page = lookup_swap_cache(entry); ... set_pte_at(mm, address, page_table, pte); page_add_anon_rmap(page, vma, address); And think about what happens here! In particular, what happens is that this will now be the "first" mapping of that page, so page_add_anon_rmap() used to do if (first) __page_set_anon_rmap(page, vma, address); and notice what anon_vma it will use? It will use the anon_vma for process B! What happens then? Trivial: process 'A' also pages it in (nothing happens, it's not the first mapping), and then process 'B' execve's or exits or unmaps, making anon_vma B go away. End result: process A has a page that points to anon_vma B, but anon_vma B does not exist any more. This can go on forever. Forget about RCU grace periods, forget about locking, forget anything like that. The bug is simply that page->mapping points to an anon_vma that was correct at one point, but was _not_ the one that was shared by all users of that possible mapping. Changing it to always use the deepest anon_vma in the anonvma chain gets us to the safest model. This can be improved in certain cases: if we know the page is private to just this particular mapping (for example, it's a new page, or it is the only swapcache entry), we could pick the top (most specific) anon_vma. But that's a future optimization. Make it _work_ reliably first. Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12 19:44:29 +00:00
*/
if (!exclusive)
anon_vma = anon_vma->root;
mm/rmap: stop store reordering issue on page->mapping Hugh Dickins and Minchan Kim observed a long time issue which discussed here, but actully the mentioned fix in https://lore.kernel.org/lkml/20150504031722.GA2768@blaptop/ was missed. The store reordering may cause problem in the scenario: CPU 0 CPU1 do_anonymous_page page_add_new_anon_rmap() page->mapping = anon_vma + PAGE_MAPPING_ANON lru_cache_add_inactive_or_unevictable() spin_lock(lruvec->lock) SetPageLRU() spin_unlock(lruvec->lock) /* idletacking judged it as LRU * page so pass the page in * page_idle_clear_pte_refs */ page_idle_clear_pte_refs rmap_walk if PageAnon(page) Johannes give detailed examples how the store reordering could cause trouble: "The concern is the SetPageLRU may get reorder before 'page->mapping' setting, That would make CPU 1 will observe at page->mapping after observing PageLRU set on the page. 1. anon_vma + PAGE_MAPPING_ANON That's the in-order scenario and is fine. 2. NULL That's possible if the page->mapping store gets reordered to occur after SetPageLRU. That's fine too because we check for it. 3. anon_vma without the PAGE_MAPPING_ANON bit That would be a problem and could lead to all kinds of undesirable behavior including crashes and data corruption. Is it possible? AFAICT the compiler is allowed to tear the store to page->mapping and I don't see anything that would prevent it. That said, I also don't see how the reader testing PageLRU under the lru_lock would prevent that in the first place. AFAICT we need that WRITE_ONCE() around the page->mapping assignment." [alex.shi@linux.alibaba.com: updated for comments change from Johannes] Link: https://lkml.kernel.org/r/e66ef2e5-c74c-6498-e8b3-56c37b9d2d15@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-7-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:42 +00:00
/*
* page_idle does a lockless/optimistic rmap scan on folio->mapping.
mm/rmap: stop store reordering issue on page->mapping Hugh Dickins and Minchan Kim observed a long time issue which discussed here, but actully the mentioned fix in https://lore.kernel.org/lkml/20150504031722.GA2768@blaptop/ was missed. The store reordering may cause problem in the scenario: CPU 0 CPU1 do_anonymous_page page_add_new_anon_rmap() page->mapping = anon_vma + PAGE_MAPPING_ANON lru_cache_add_inactive_or_unevictable() spin_lock(lruvec->lock) SetPageLRU() spin_unlock(lruvec->lock) /* idletacking judged it as LRU * page so pass the page in * page_idle_clear_pte_refs */ page_idle_clear_pte_refs rmap_walk if PageAnon(page) Johannes give detailed examples how the store reordering could cause trouble: "The concern is the SetPageLRU may get reorder before 'page->mapping' setting, That would make CPU 1 will observe at page->mapping after observing PageLRU set on the page. 1. anon_vma + PAGE_MAPPING_ANON That's the in-order scenario and is fine. 2. NULL That's possible if the page->mapping store gets reordered to occur after SetPageLRU. That's fine too because we check for it. 3. anon_vma without the PAGE_MAPPING_ANON bit That would be a problem and could lead to all kinds of undesirable behavior including crashes and data corruption. Is it possible? AFAICT the compiler is allowed to tear the store to page->mapping and I don't see anything that would prevent it. That said, I also don't see how the reader testing PageLRU under the lru_lock would prevent that in the first place. AFAICT we need that WRITE_ONCE() around the page->mapping assignment." [alex.shi@linux.alibaba.com: updated for comments change from Johannes] Link: https://lkml.kernel.org/r/e66ef2e5-c74c-6498-e8b3-56c37b9d2d15@linux.alibaba.com Link: https://lkml.kernel.org/r/1604566549-62481-7-git-send-email-alex.shi@linux.alibaba.com Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Chen, Rong A" <rong.a.chen@intel.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jann Horn <jannh@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 20:33:42 +00:00
* Make sure the compiler doesn't split the stores of anon_vma and
* the PAGE_MAPPING_ANON type identifier, otherwise the rmap code
* could mistake the mapping for a struct address_space and crash.
*/
anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
WRITE_ONCE(folio->mapping, (struct address_space *) anon_vma);
folio->index = linear_page_index(vma, address);
}
/**
* __page_check_anon_rmap - sanity check anonymous rmap addition
* @folio: The folio containing @page.
* @page: the page to check the mapping of
* @vma: the vm area in which the mapping is added
* @address: the user virtual address mapped
*/
static void __page_check_anon_rmap(struct folio *folio, struct page *page,
struct vm_area_struct *vma, unsigned long address)
{
/*
* The page's anon-rmap details (mapping and index) are guaranteed to
* be set up correctly at this point.
*
* We have exclusion against page_add_anon_rmap because the caller
* always holds the page locked.
*
* We have exclusion against page_add_new_anon_rmap because those pages
* are initially only visible via the pagetables, and the pte is locked
* over the call to page_add_new_anon_rmap.
*/
VM_BUG_ON_FOLIO(folio_anon_vma(folio)->root != vma->anon_vma->root,
folio);
VM_BUG_ON_PAGE(page_to_pgoff(page) != linear_page_index(vma, address),
page);
}
/**
* page_add_anon_rmap - add pte mapping to an anonymous page
* @page: the page to add the mapping to
* @vma: the vm area in which the mapping is added
* @address: the user virtual address mapped
mm/rmap: remove do_page_add_anon_rmap() ... and instead convert page_add_anon_rmap() to accept flags. Passing flags instead of bools is usually nicer either way, and we want to more often also pass RMAP_EXCLUSIVE in follow up patches when detecting that an anonymous page is exclusive: for example, when restoring an anonymous page from a writable migration entry. This is a preparation for marking an anonymous page inside page_add_anon_rmap() as exclusive when RMAP_EXCLUSIVE is passed. Link: https://lkml.kernel.org/r/20220428083441.37290-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:43 +00:00
* @flags: the rmap flags
*
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
* The caller needs to hold the pte lock, and the page must be locked in
* the anon_vma case: to serialize mapping,index checking after setting,
* and to ensure that PageAnon is not being upgraded racily to PageKsm
* (but PageKsm is never downgraded to PageAnon).
*/
void page_add_anon_rmap(struct page *page, struct vm_area_struct *vma,
unsigned long address, rmap_t flags)
{
struct folio *folio = page_folio(page);
atomic_t *mapped = &folio->_nr_pages_mapped;
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
int nr = 0, nr_pmdmapped = 0;
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
bool compound = flags & RMAP_COMPOUND;
bool first;
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
/* Is page being mapped by PTE? Is this its first map to be added? */
if (likely(!compound)) {
first = atomic_inc_and_test(&page->_mapcount);
nr = first;
if (first && folio_test_large(folio)) {
mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped Can the lock_compound_mapcount() bit_spin_lock apparatus be removed now? Yes. Not by atomic64_t or cmpxchg games, those get difficult on 32-bit; but if we slightly abuse subpages_mapcount by additionally demanding that one bit be set there when the compound page is PMD-mapped, then a cascade of two atomic ops is able to maintain the stats without bit_spin_lock. This is harder to reason about than when bit_spin_locked, but I believe safe; and no drift in stats detected when testing. When there are racing removes and adds, of course the sequence of operations is less well- defined; but each operation on subpages_mapcount is atomically good. What might be disastrous, is if subpages_mapcount could ever fleetingly appear negative: but the pte lock (or pmd lock) these rmap functions are called under, ensures that a last remove cannot race ahead of a first add. Continue to make an exception for hugetlb (PageHuge) pages, though that exception can be easily removed by a further commit if necessary: leave subpages_mapcount 0, don't bother with COMPOUND_MAPPED in its case, just carry on checking compound_mapcount too in folio_mapped(), page_mapped(). Evidence is that this way goes slightly faster than the previous implementation in all cases (pmds after ptes now taking around 103ms); and relieves us of worrying about contention on the bit_spin_lock. Link: https://lkml.kernel.org/r/3978f3ca-5473-55a7-4e14-efea5968d892@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:49:36 +00:00
nr = atomic_inc_return_relaxed(mapped);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
nr = (nr < COMPOUND_MAPPED);
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
}
} else if (folio_test_pmd_mappable(folio)) {
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
/* That test is redundant: it's for safety or to optimize out */
first = atomic_inc_and_test(&folio->_entire_mapcount);
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (first) {
mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped Can the lock_compound_mapcount() bit_spin_lock apparatus be removed now? Yes. Not by atomic64_t or cmpxchg games, those get difficult on 32-bit; but if we slightly abuse subpages_mapcount by additionally demanding that one bit be set there when the compound page is PMD-mapped, then a cascade of two atomic ops is able to maintain the stats without bit_spin_lock. This is harder to reason about than when bit_spin_locked, but I believe safe; and no drift in stats detected when testing. When there are racing removes and adds, of course the sequence of operations is less well- defined; but each operation on subpages_mapcount is atomically good. What might be disastrous, is if subpages_mapcount could ever fleetingly appear negative: but the pte lock (or pmd lock) these rmap functions are called under, ensures that a last remove cannot race ahead of a first add. Continue to make an exception for hugetlb (PageHuge) pages, though that exception can be easily removed by a further commit if necessary: leave subpages_mapcount 0, don't bother with COMPOUND_MAPPED in its case, just carry on checking compound_mapcount too in folio_mapped(), page_mapped(). Evidence is that this way goes slightly faster than the previous implementation in all cases (pmds after ptes now taking around 103ms); and relieves us of worrying about contention on the bit_spin_lock. Link: https://lkml.kernel.org/r/3978f3ca-5473-55a7-4e14-efea5968d892@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:49:36 +00:00
nr = atomic_add_return_relaxed(COMPOUND_MAPPED, mapped);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
if (likely(nr < COMPOUND_MAPPED + COMPOUND_MAPPED)) {
nr_pmdmapped = folio_nr_pages(folio);
nr = nr_pmdmapped - (nr & FOLIO_PAGES_MAPPED);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
/* Raced ahead of a remove and another add? */
if (unlikely(nr < 0))
nr = 0;
} else {
/* Raced ahead of a remove of COMPOUND_MAPPED */
nr = 0;
}
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
}
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
}
mm,thp,rmap: simplify compound page mapcount handling Compound page (folio) mapcount calculations have been different for anon and file (or shmem) THPs, and involved the obscure PageDoubleMap flag. And each huge mapping and unmapping of a file (or shmem) THP involved atomically incrementing and decrementing the mapcount of every subpage of that huge page, dirtying many struct page cachelines. Add subpages_mapcount field to the struct folio and first tail page, so that the total of subpage mapcounts is available in one place near the head: then page_mapcount() and total_mapcount() and page_mapped(), and their folio equivalents, are so quick that anon and file and hugetlb don't need to be optimized differently. Delete the unloved PageDoubleMap. page_add and page_remove rmap functions must now maintain the subpages_mapcount as well as the subpage _mapcount, when dealing with pte mappings of huge pages; and correct maintenance of NR_ANON_MAPPED and NR_FILE_MAPPED statistics still needs reading through the subpages, using nr_subpages_unmapped() - but only when first or last pmd mapping finds subpages_mapcount raised (double-map case, not the common case). But are those counts (used to decide when to split an anon THP, and in vmscan's pagecache_reclaimable heuristic) correctly maintained? Not quite: since page_remove_rmap() (and also split_huge_pmd()) is often called without page lock, there can be races when a subpage pte mapcount 0<->1 while compound pmd mapcount 0<->1 is scanning - races which the previous implementation had prevented. The statistics might become inaccurate, and even drift down until they underflow through 0. That is not good enough, but is better dealt with in a followup patch. Update a few comments on first and second tail page overlaid fields. hugepage_add_new_anon_rmap() has to "increment" compound_mapcount, but subpages_mapcount and compound_pincount are already correctly at 0, so delete its reinitialization of compound_pincount. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 119 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 92ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. But there might be some benchmarks which would show a slowdown, because tail struct pages now fall out of cache until final freeing checks them. Link: https://lkml.kernel.org/r/47ad693-717-79c8-e1ba-46c3a6602e48@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:51:38 +00:00
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (nr_pmdmapped)
__lruvec_stat_mod_folio(folio, NR_ANON_THPS, nr_pmdmapped);
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (nr)
__lruvec_stat_mod_folio(folio, NR_ANON_MAPPED, nr);
ksm: let shared pages be swappable Initial implementation for swapping out KSM's shared pages: add page_referenced_ksm() and try_to_unmap_ksm(), which rmap.c calls when faced with a PageKsm page. Most of what's needed can be got from the rmap_items listed from the stable_node of the ksm page, without discovering the actual vma: so in this patch just fake up a struct vma for page_referenced_one() or try_to_unmap_one(), then refine that in the next patch. Add VM_NONLINEAR to ksm_madvise()'s list of exclusions: it has always been implicit there (being only set with VM_SHARED, already excluded), but let's make it explicit, to help justify the lack of nonlinear unmap. Rely on the page lock to protect against concurrent modifications to that page's node of the stable tree. The awkward part is not swapout but swapin: do_swap_page() and page_add_anon_rmap() now have to allow for new possibilities - perhaps a ksm page still in swapcache, perhaps a swapcache page associated with one location in one anon_vma now needed for another location or anon_vma. (And the vma might even be no longer VM_MERGEABLE when that happens.) ksm_might_need_to_copy() checks for that case, and supplies a duplicate page when necessary, simply leaving it to a subsequent pass of ksmd to rediscover the identity and merge them back into one ksm page. Disappointingly primitive: but the alternative would have to accumulate unswappable info about the swapped out ksm pages, limiting swappability. Remove page_add_ksm_rmap(): page_add_anon_rmap() now has to allow for the particular case it was handling, so just use it instead. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:24 +00:00
if (unlikely(!folio_test_anon(folio))) {
VM_WARN_ON_FOLIO(!folio_test_locked(folio), folio);
/*
* For a PTE-mapped large folio, we only know that the single
* PTE is exclusive. Further, __folio_set_anon() might not get
* folio->index right when not given the address of the head
* page.
*/
VM_WARN_ON_FOLIO(folio_test_large(folio) && !compound, folio);
__folio_set_anon(folio, vma, address,
!!(flags & RMAP_EXCLUSIVE));
} else if (likely(!folio_test_ksm(folio))) {
__page_check_anon_rmap(folio, page, vma, address);
}
if (flags & RMAP_EXCLUSIVE)
SetPageAnonExclusive(page);
/* While PTE-mapping a THP we have a PMD and a PTE mapping. */
VM_WARN_ON_FOLIO((atomic_read(&page->_mapcount) > 0 ||
(folio_test_large(folio) && folio_entire_mapcount(folio) > 1)) &&
PageAnonExclusive(page), folio);
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
/*
* For large folio, only mlock it if it's fully mapped to VMA. It's
* not easy to check whether the large folio is fully mapped to VMA
* here. Only mlock normal 4K folio and leave page reclaim to handle
* large folio.
*/
if (!folio_test_large(folio))
mlock_vma_folio(folio, vma);
}
/**
* folio_add_new_anon_rmap - Add mapping to a new anonymous folio.
* @folio: The folio to add the mapping to.
* @vma: the vm area in which the mapping is added
* @address: the user virtual address mapped
mm/rmap: drop "compound" parameter from page_add_new_anon_rmap() New anonymous pages are always mapped natively: only THP/khugepaged code maps a new compound anonymous page and passes "true". Otherwise, we're just dealing with simple, non-compound pages. Let's give the interface clearer semantics and document these. Remove the PageTransCompound() sanity check from page_add_new_anon_rmap(). Link: https://lkml.kernel.org/r/20220428083441.37290-9-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:43 +00:00
*
* Like page_add_anon_rmap() but must only be called on *new* folios.
* This means the inc-and-test can be bypassed.
* The folio does not have to be locked.
*
* If the folio is large, it is accounted as a THP. As the folio
* is new, it's assumed to be mapped exclusively by a single process.
*/
void folio_add_new_anon_rmap(struct folio *folio, struct vm_area_struct *vma,
unsigned long address)
{
int nr;
VM_BUG_ON_VMA(address < vma->vm_start || address >= vma->vm_end, vma);
__folio_set_swapbacked(folio);
if (likely(!folio_test_pmd_mappable(folio))) {
/* increment count (starts at -1) */
atomic_set(&folio->_mapcount, 0);
nr = 1;
} else {
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
/* increment count (starts at -1) */
atomic_set(&folio->_entire_mapcount, 0);
atomic_set(&folio->_nr_pages_mapped, COMPOUND_MAPPED);
nr = folio_nr_pages(folio);
__lruvec_stat_mod_folio(folio, NR_ANON_THPS, nr);
}
__lruvec_stat_mod_folio(folio, NR_ANON_MAPPED, nr);
__folio_set_anon(folio, vma, address, true);
SetPageAnonExclusive(&folio->page);
}
/**
* folio_add_file_rmap_range - add pte mapping to page range of a folio
* @folio: The folio to add the mapping to
* @page: The first page to add
* @nr_pages: The number of pages which will be mapped
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
* @vma: the vm area in which the mapping is added
* @compound: charge the page as compound or small page
*
* The page range of folio is defined by [first_page, first_page + nr_pages)
*
* The caller needs to hold the pte lock.
*/
void folio_add_file_rmap_range(struct folio *folio, struct page *page,
unsigned int nr_pages, struct vm_area_struct *vma,
bool compound)
{
atomic_t *mapped = &folio->_nr_pages_mapped;
unsigned int nr_pmdmapped = 0, first;
int nr = 0;
VM_WARN_ON_FOLIO(compound && !folio_test_pmd_mappable(folio), folio);
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
/* Is page being mapped by PTE? Is this its first map to be added? */
if (likely(!compound)) {
do {
first = atomic_inc_and_test(&page->_mapcount);
if (first && folio_test_large(folio)) {
first = atomic_inc_return_relaxed(mapped);
first = (first < COMPOUND_MAPPED);
}
if (first)
nr++;
} while (page++, --nr_pages > 0);
} else if (folio_test_pmd_mappable(folio)) {
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
/* That test is redundant: it's for safety or to optimize out */
first = atomic_inc_and_test(&folio->_entire_mapcount);
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (first) {
mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped Can the lock_compound_mapcount() bit_spin_lock apparatus be removed now? Yes. Not by atomic64_t or cmpxchg games, those get difficult on 32-bit; but if we slightly abuse subpages_mapcount by additionally demanding that one bit be set there when the compound page is PMD-mapped, then a cascade of two atomic ops is able to maintain the stats without bit_spin_lock. This is harder to reason about than when bit_spin_locked, but I believe safe; and no drift in stats detected when testing. When there are racing removes and adds, of course the sequence of operations is less well- defined; but each operation on subpages_mapcount is atomically good. What might be disastrous, is if subpages_mapcount could ever fleetingly appear negative: but the pte lock (or pmd lock) these rmap functions are called under, ensures that a last remove cannot race ahead of a first add. Continue to make an exception for hugetlb (PageHuge) pages, though that exception can be easily removed by a further commit if necessary: leave subpages_mapcount 0, don't bother with COMPOUND_MAPPED in its case, just carry on checking compound_mapcount too in folio_mapped(), page_mapped(). Evidence is that this way goes slightly faster than the previous implementation in all cases (pmds after ptes now taking around 103ms); and relieves us of worrying about contention on the bit_spin_lock. Link: https://lkml.kernel.org/r/3978f3ca-5473-55a7-4e14-efea5968d892@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:49:36 +00:00
nr = atomic_add_return_relaxed(COMPOUND_MAPPED, mapped);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
if (likely(nr < COMPOUND_MAPPED + COMPOUND_MAPPED)) {
nr_pmdmapped = folio_nr_pages(folio);
nr = nr_pmdmapped - (nr & FOLIO_PAGES_MAPPED);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
/* Raced ahead of a remove and another add? */
if (unlikely(nr < 0))
nr = 0;
} else {
/* Raced ahead of a remove of COMPOUND_MAPPED */
nr = 0;
}
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
}
}
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (nr_pmdmapped)
__lruvec_stat_mod_folio(folio, folio_test_swapbacked(folio) ?
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
NR_SHMEM_PMDMAPPED : NR_FILE_PMDMAPPED, nr_pmdmapped);
mm/thp: fix NR_FILE_MAPPED accounting in page_*_file_rmap() NR_FILE_MAPPED accounting in mm/rmap.c (for /proc/meminfo "Mapped" and /proc/vmstat "nr_mapped" and the memcg's memory.stat "mapped_file") is slightly flawed for file or shmem huge pages. It is well thought out, and looks convincing, but there's a racy case when the careful counting in page_remove_file_rmap() (without page lock) gets discarded. So that in a workload like two "make -j20" kernel builds under memory pressure, with cc1 on hugepage text, "Mapped" can easily grow by a spurious 5MB or more on each iteration, ending up implausibly bigger than most other numbers in /proc/meminfo. And, hypothetically, might grow to the point of seriously interfering in mm/vmscan.c's heuristics, which do take NR_FILE_MAPPED into some consideration. Fixed by moving the __mod_lruvec_page_state() down to where it will not be missed before return (and I've grown a bit tired of that oft-repeated but-not-everywhere comment on the __ness: it gets lost in the move here). Does page_add_file_rmap() need the same change? I suspect not, because page lock is held in all relevant cases, and its skipping case looks safe; but it's much easier to be sure, if we do make the same change. Link: https://lkml.kernel.org/r/e02e52a1-8550-a57c-ed29-f51191ea2375@google.com Fixes: dd78fedde4b9 ("rmap: support file thp") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:09:55 +00:00
if (nr)
__lruvec_stat_mod_folio(folio, NR_FILE_MAPPED, nr);
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
/* See comments in page_add_anon_rmap() */
if (!folio_test_large(folio))
mlock_vma_folio(folio, vma);
}
/**
* page_add_file_rmap - add pte mapping to a file page
* @page: the page to add the mapping to
* @vma: the vm area in which the mapping is added
* @compound: charge the page as compound or small page
*
* The caller needs to hold the pte lock.
*/
void page_add_file_rmap(struct page *page, struct vm_area_struct *vma,
bool compound)
{
struct folio *folio = page_folio(page);
unsigned int nr_pages;
VM_WARN_ON_ONCE_PAGE(compound && !PageTransHuge(page), page);
if (likely(!compound))
nr_pages = 1;
else
nr_pages = folio_nr_pages(folio);
folio_add_file_rmap_range(folio, page, nr_pages, vma, compound);
}
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
/**
* page_remove_rmap - take down pte mapping from a page
* @page: page to remove mapping from
* @vma: the vm area from which the mapping is removed
* @compound: uncharge the page as compound or small page
*
* The caller needs to hold the pte lock.
*/
void page_remove_rmap(struct page *page, struct vm_area_struct *vma,
bool compound)
{
struct folio *folio = page_folio(page);
atomic_t *mapped = &folio->_nr_pages_mapped;
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
int nr = 0, nr_pmdmapped = 0;
bool last;
enum node_stat_item idx;
VM_BUG_ON_PAGE(compound && !PageHead(page), page);
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
/* Hugetlb pages are not counted in NR_*MAPPED */
if (unlikely(folio_test_hugetlb(folio))) {
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
/* hugetlb pages are always mapped with pmds */
atomic_dec(&folio->_entire_mapcount);
mm: memcontrol: switch to native NR_ANON_MAPPED counter Memcg maintains a private MEMCG_RSS counter. This divergence from the generic VM accounting means unnecessary code overhead, and creates a dependency for memcg that page->mapping is set up at the time of charging, so that page types can be told apart. Convert the generic accounting sites to mod_lruvec_page_state and friends to maintain the per-cgroup vmstat counter of NR_ANON_MAPPED. We use lock_page_memcg() to stabilize page->mem_cgroup during rmap changes, the same way we do for NR_FILE_MAPPED. With the previous patch removing MEMCG_CACHE and the private NR_SHMEM counter, this patch finally eliminates the need to have page->mapping set up at charge time. However, we need to have page->mem_cgroup set up by the time rmap runs and does the accounting, so switch the commit and the rmap callbacks around. v2: fix temporary accounting bug by switching rmap<->commit (Joonsoo) Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alex Shi <alex.shi@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Balbir Singh <bsingharora@gmail.com> Link: http://lkml.kernel.org/r/20200508183105.225460-11-hannes@cmpxchg.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03 23:01:57 +00:00
return;
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
}
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
/* Is page being unmapped by PTE? Is this its last map to be removed? */
if (likely(!compound)) {
last = atomic_add_negative(-1, &page->_mapcount);
nr = last;
if (last && folio_test_large(folio)) {
mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped Can the lock_compound_mapcount() bit_spin_lock apparatus be removed now? Yes. Not by atomic64_t or cmpxchg games, those get difficult on 32-bit; but if we slightly abuse subpages_mapcount by additionally demanding that one bit be set there when the compound page is PMD-mapped, then a cascade of two atomic ops is able to maintain the stats without bit_spin_lock. This is harder to reason about than when bit_spin_locked, but I believe safe; and no drift in stats detected when testing. When there are racing removes and adds, of course the sequence of operations is less well- defined; but each operation on subpages_mapcount is atomically good. What might be disastrous, is if subpages_mapcount could ever fleetingly appear negative: but the pte lock (or pmd lock) these rmap functions are called under, ensures that a last remove cannot race ahead of a first add. Continue to make an exception for hugetlb (PageHuge) pages, though that exception can be easily removed by a further commit if necessary: leave subpages_mapcount 0, don't bother with COMPOUND_MAPPED in its case, just carry on checking compound_mapcount too in folio_mapped(), page_mapped(). Evidence is that this way goes slightly faster than the previous implementation in all cases (pmds after ptes now taking around 103ms); and relieves us of worrying about contention on the bit_spin_lock. Link: https://lkml.kernel.org/r/3978f3ca-5473-55a7-4e14-efea5968d892@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:49:36 +00:00
nr = atomic_dec_return_relaxed(mapped);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
nr = (nr < COMPOUND_MAPPED);
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
}
} else if (folio_test_pmd_mappable(folio)) {
mm,thp,rmap: subpages_mapcount of PTE-mapped subpages Patch series "mm,thp,rmap: rework the use of subpages_mapcount", v2. This patch (of 3): Following suggestion from Linus, instead of counting every PTE map of a compound page in subpages_mapcount, just count how many of its subpages are PTE-mapped: this yields the exact number needed for NR_ANON_MAPPED and NR_FILE_MAPPED stats, without any need for a locked scan of subpages; and requires updating the count less often. This does then revert total_mapcount() and folio_mapcount() to needing a scan of subpages; but they are inherently racy, and need no locking, so Linus is right that the scans are much better done there. Plus (unlike in 6.1 and previous) subpages_mapcount lets us avoid the scan in the common case of no PTE maps. And page_mapped() and folio_mapped() remain scanless and just as efficient with the new meaning of subpages_mapcount: those are the functions which I most wanted to remove the scan from. The updated page_dup_compound_rmap() is no longer suitable for use by anon THP's __split_huge_pmd_locked(); but page_add_anon_rmap() can be used for that, so long as its VM_BUG_ON_PAGE(!PageLocked) is deleted. Evidence is that this way goes slightly faster than the previous implementation for most cases; but significantly faster in the (now scanless) pmds after ptes case, which started out at 870ms and was brought down to 495ms by the previous series, now takes around 105ms. Link: https://lkml.kernel.org/r/a5849eca-22f1-3517-bf29-95d982242742@google.com Link: https://lkml.kernel.org/r/eec17e16-4e1-7c59-f1bc-5bca90dac919@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:42:04 +00:00
/* That test is redundant: it's for safety or to optimize out */
last = atomic_add_negative(-1, &folio->_entire_mapcount);
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (last) {
mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped Can the lock_compound_mapcount() bit_spin_lock apparatus be removed now? Yes. Not by atomic64_t or cmpxchg games, those get difficult on 32-bit; but if we slightly abuse subpages_mapcount by additionally demanding that one bit be set there when the compound page is PMD-mapped, then a cascade of two atomic ops is able to maintain the stats without bit_spin_lock. This is harder to reason about than when bit_spin_locked, but I believe safe; and no drift in stats detected when testing. When there are racing removes and adds, of course the sequence of operations is less well- defined; but each operation on subpages_mapcount is atomically good. What might be disastrous, is if subpages_mapcount could ever fleetingly appear negative: but the pte lock (or pmd lock) these rmap functions are called under, ensures that a last remove cannot race ahead of a first add. Continue to make an exception for hugetlb (PageHuge) pages, though that exception can be easily removed by a further commit if necessary: leave subpages_mapcount 0, don't bother with COMPOUND_MAPPED in its case, just carry on checking compound_mapcount too in folio_mapped(), page_mapped(). Evidence is that this way goes slightly faster than the previous implementation in all cases (pmds after ptes now taking around 103ms); and relieves us of worrying about contention on the bit_spin_lock. Link: https://lkml.kernel.org/r/3978f3ca-5473-55a7-4e14-efea5968d892@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <error27@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-22 09:49:36 +00:00
nr = atomic_sub_return_relaxed(COMPOUND_MAPPED, mapped);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
if (likely(nr < COMPOUND_MAPPED)) {
nr_pmdmapped = folio_nr_pages(folio);
nr = nr_pmdmapped - (nr & FOLIO_PAGES_MAPPED);
mm,thp,rmap: fix races between updates of subpages_mapcount Commit 4b51634cd16a, introducing the COMPOUND_MAPPED bit, paid attention to the impossibility of subpages_mapcount ever appearing negative; but did not attend to those races in which it can momentarily appear larger than thought possible. These arise from how page_remove_rmap() first decrements page->_mapcount or compound_mapcount, then, if that transition goes negative (logical 0), decrements subpages_mapcount. The initial decrement lets a racing page_add_*_rmap() reincrement _mapcount or compound_mapcount immediately, and then in rare cases its corresponding increment of subpages_mapcount may be completed before page_remove_rmap()'s decrement. There could even (with increasing unlikelihood) be a series of increments intermixed with the decrements. In practice, checking subpages_mapcount with a temporary WARN on range, has caught values of 0x1000000 (2*COMPOUND_MAPPED, when move_pages() was using remove_migration_pmd()) and 0x800201 (do_huge_pmd_wp_page() using __split_huge_pmd()): page_add_anon_rmap() racing page_remove_rmap(), as predicted. I certainly found it harder to reason about than when bit_spin_locked, but the easy case gives a clue to how to handle the harder case. The easy case being the three !(nr & COMPOUND_MAPPED) checks, which should obviously be replaced by (nr < COMPOUND_MAPPED) checks - to count a page as compound mapped, even while the bit in that position is 0. The harder case is when trying to decide how many subpages are newly covered or uncovered, when compound map is first added or last removed: not knowing all that racily happened between first and second atomic ops. But the easy way to handle that, is again to count the page as compound mapped all the while that its subpages_mapcount indicates so - ignoring the _mapcount or compound_mapcount transition while it is on the way to being reversed. Link: https://lkml.kernel.org/r/4388158-3092-a960-ff2d-55f2b0fe4ef8@google.com Fixes: 4b51634cd16a ("mm,thp,rmap: subpages_mapcount COMPOUND_MAPPED if PMD-mapped") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-12-05 01:57:07 +00:00
/* Raced ahead of another remove and an add? */
if (unlikely(nr < 0))
nr = 0;
} else {
/* An add of COMPOUND_MAPPED raced ahead */
nr = 0;
}
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
}
}
mm,thp,rmap: simplify compound page mapcount handling Compound page (folio) mapcount calculations have been different for anon and file (or shmem) THPs, and involved the obscure PageDoubleMap flag. And each huge mapping and unmapping of a file (or shmem) THP involved atomically incrementing and decrementing the mapcount of every subpage of that huge page, dirtying many struct page cachelines. Add subpages_mapcount field to the struct folio and first tail page, so that the total of subpage mapcounts is available in one place near the head: then page_mapcount() and total_mapcount() and page_mapped(), and their folio equivalents, are so quick that anon and file and hugetlb don't need to be optimized differently. Delete the unloved PageDoubleMap. page_add and page_remove rmap functions must now maintain the subpages_mapcount as well as the subpage _mapcount, when dealing with pte mappings of huge pages; and correct maintenance of NR_ANON_MAPPED and NR_FILE_MAPPED statistics still needs reading through the subpages, using nr_subpages_unmapped() - but only when first or last pmd mapping finds subpages_mapcount raised (double-map case, not the common case). But are those counts (used to decide when to split an anon THP, and in vmscan's pagecache_reclaimable heuristic) correctly maintained? Not quite: since page_remove_rmap() (and also split_huge_pmd()) is often called without page lock, there can be races when a subpage pte mapcount 0<->1 while compound pmd mapcount 0<->1 is scanning - races which the previous implementation had prevented. The statistics might become inaccurate, and even drift down until they underflow through 0. That is not good enough, but is better dealt with in a followup patch. Update a few comments on first and second tail page overlaid fields. hugepage_add_new_anon_rmap() has to "increment" compound_mapcount, but subpages_mapcount and compound_pincount are already correctly at 0, so delete its reinitialization of compound_pincount. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 119 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 92ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. But there might be some benchmarks which would show a slowdown, because tail struct pages now fall out of cache until final freeing checks them. Link: https://lkml.kernel.org/r/47ad693-717-79c8-e1ba-46c3a6602e48@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:51:38 +00:00
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (nr_pmdmapped) {
if (folio_test_anon(folio))
idx = NR_ANON_THPS;
else if (folio_test_swapbacked(folio))
idx = NR_SHMEM_PMDMAPPED;
else
idx = NR_FILE_PMDMAPPED;
__lruvec_stat_mod_folio(folio, idx, -nr_pmdmapped);
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
}
if (nr) {
idx = folio_test_anon(folio) ? NR_ANON_MAPPED : NR_FILE_MAPPED;
__lruvec_stat_mod_folio(folio, idx, -nr);
/*
* Queue anon THP for deferred split if at least one
* page of the folio is unmapped and at least one page
* is still mapped.
*/
if (folio_test_pmd_mappable(folio) && folio_test_anon(folio))
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
if (!compound || nr < nr_pmdmapped)
deferred_split_folio(folio);
mm: rework mapcount accounting to enable 4k mapping of THPs We're going to allow mapping of individual 4k pages of THP compound. It means we need to track mapcount on per small page basis. Straight-forward approach is to use ->_mapcount in all subpages to track how many time this subpage is mapped with PMDs or PTEs combined. But this is rather expensive: mapping or unmapping of a THP page with PMD would require HPAGE_PMD_NR atomic operations instead of single we have now. The idea is to store separately how many times the page was mapped as whole -- compound_mapcount. This frees up ->_mapcount in subpages to track PTE mapcount. We use the same approach as with compound page destructor and compound order to store compound_mapcount: use space in first tail page, ->mapping this time. Any time we map/unmap whole compound page (THP or hugetlb) -- we increment/decrement compound_mapcount. When we map part of compound page with PTE we operate on ->_mapcount of the subpage. page_mapcount() counts both: PTE and PMD mappings of the page. Basically, we have mapcount for a subpage spread over two counters. It makes tricky to detect when last mapcount for a page goes away. We introduced PageDoubleMap() for this. When we split THP PMD for the first time and there's other PMD mapping left we offset up ->_mapcount in all subpages by one and set PG_double_map on the compound page. These additional references go away with last compound_mapcount. This approach provides a way to detect when last mapcount goes away on per small page basis without introducing new overhead for most common cases. [akpm@linux-foundation.org: fix typo in comment] [mhocko@suse.com: ignore partial THP when moving task] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:53:42 +00:00
}
/*
* It would be tidy to reset folio_test_anon mapping when fully
* unmapped, but that might overwrite a racing page_add_anon_rmap
* which increments mapcount after us but sets mapping before us:
* so leave the reset to free_pages_prepare, and remember that
* it's only reliable while mapped.
*/
mm,thp,rmap: lock_compound_mapcounts() on THP mapcounts Fix the races in maintaining compound_mapcount, subpages_mapcount and subpage _mapcount by using PG_locked in the first tail of any compound page for a bit_spin_lock() on such modifications; skipping the usual atomic operations on those fields in this case. Bring page_remove_file_rmap() and page_remove_anon_compound_rmap() back into page_remove_rmap() itself. Rearrange page_add_anon_rmap() and page_add_file_rmap() and page_remove_rmap() to follow the same "if (compound) {lock} else if (PageCompound) {lock} else {atomic}" pattern (with a PageTransHuge in the compound test, like before, to avoid BUG_ONs and optimize away that block when THP is not configured). Move all the stats updates outside, after the bit_spin_locked section, so that it is sure to be a leaf lock. Add page_dup_compound_rmap() to manage compound locking versus atomics in sync with the rest. In particular, hugetlb pages are still using the atomics: to avoid unnecessary interference there, and because they never have subpage mappings; but this exception can easily be changed. Conveniently, page_dup_compound_rmap() turns out to suit an anon THP's __split_huge_pmd_locked() too. bit_spin_lock() is not popular with PREEMPT_RT folks: but PREEMPT_RT sensibly excludes TRANSPARENT_HUGEPAGE already, so its only exposure is to the non-hugetlb non-THP pte-mapped compound pages (with large folios being currently dependent on TRANSPARENT_HUGEPAGE). There is never any scan of subpages in this case; but we have chosen to use PageCompound tests rather than PageTransCompound tests to gate the use of lock_compound_mapcounts(), so that page_mapped() is correct on all compound pages, whether or not TRANSPARENT_HUGEPAGE is enabled: could that be a problem for PREEMPT_RT, when there is contention on the lock - under heavy concurrent forking for example? If so, then it can be turned into a sleeping lock (like folio_lock()) when PREEMPT_RT. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 115 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 86ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. Mapping huge pages by ptes is largely unaffected but variable: between 5% faster and 5% slower in what I've recorded. Contention on the lock is likely to behave worse than contention on the atomics behaved. Link: https://lkml.kernel.org/r/1b42bd1a-8223-e827-602f-d466c2db7d3c@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:53:45 +00:00
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
munlock_vma_folio(folio, vma);
}
/*
* @arg: enum ttu_flags will be passed to this argument
*/
static bool try_to_unmap_one(struct folio *folio, struct vm_area_struct *vma,
unsigned long address, void *arg)
{
struct mm_struct *mm = vma->vm_mm;
DEFINE_FOLIO_VMA_WALK(pvmw, folio, vma, address, 0);
pte_t pteval;
struct page *subpage;
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
bool anon_exclusive, ret = true;
struct mmu_notifier_range range;
enum ttu_flags flags = (enum ttu_flags)(long)arg;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
unsigned long pfn;
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
unsigned long hsz = 0;
mm/thp: try_to_unmap() use TTU_SYNC for safe splitting Stressing huge tmpfs often crashed on unmap_page()'s VM_BUG_ON_PAGE (!unmap_success): with dump_page() showing mapcount:1, but then its raw struct page output showing _mapcount ffffffff i.e. mapcount 0. And even if that particular VM_BUG_ON_PAGE(!unmap_success) is removed, it is immediately followed by a VM_BUG_ON_PAGE(compound_mapcount(head)), and further down an IS_ENABLED(CONFIG_DEBUG_VM) total_mapcount BUG(): all indicative of some mapcount difficulty in development here perhaps. But the !CONFIG_DEBUG_VM path handles the failures correctly and silently. I believe the problem is that once a racing unmap has cleared pte or pmd, try_to_unmap_one() may skip taking the page table lock, and emerge from try_to_unmap() before the racing task has reached decrementing mapcount. Instead of abandoning the unsafe VM_BUG_ON_PAGE(), and the ones that follow, use PVMW_SYNC in try_to_unmap_one() in this case: adding TTU_SYNC to the options, and passing that from unmap_page(). When CONFIG_DEBUG_VM, or for non-debug too? Consensus is to do the same for both: the slight overhead added should rarely matter, except perhaps if splitting sparsely-populated multiply-mapped shmem. Once confident that bugs are fixed, TTU_SYNC here can be removed, and the race tolerated. Link: https://lkml.kernel.org/r/c1e95853-8bcd-d8fd-55fa-e7f2488e78f@google.com Fixes: fec89c109f3a ("thp: rewrite freeze_page()/unfreeze_page() with generic rmap walkers") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:23:53 +00:00
/*
* When racing against e.g. zap_pte_range() on another cpu,
* in between its ptep_get_and_clear_full() and page_remove_rmap(),
* try_to_unmap() may return before page_mapped() has become false,
mm/thp: try_to_unmap() use TTU_SYNC for safe splitting Stressing huge tmpfs often crashed on unmap_page()'s VM_BUG_ON_PAGE (!unmap_success): with dump_page() showing mapcount:1, but then its raw struct page output showing _mapcount ffffffff i.e. mapcount 0. And even if that particular VM_BUG_ON_PAGE(!unmap_success) is removed, it is immediately followed by a VM_BUG_ON_PAGE(compound_mapcount(head)), and further down an IS_ENABLED(CONFIG_DEBUG_VM) total_mapcount BUG(): all indicative of some mapcount difficulty in development here perhaps. But the !CONFIG_DEBUG_VM path handles the failures correctly and silently. I believe the problem is that once a racing unmap has cleared pte or pmd, try_to_unmap_one() may skip taking the page table lock, and emerge from try_to_unmap() before the racing task has reached decrementing mapcount. Instead of abandoning the unsafe VM_BUG_ON_PAGE(), and the ones that follow, use PVMW_SYNC in try_to_unmap_one() in this case: adding TTU_SYNC to the options, and passing that from unmap_page(). When CONFIG_DEBUG_VM, or for non-debug too? Consensus is to do the same for both: the slight overhead added should rarely matter, except perhaps if splitting sparsely-populated multiply-mapped shmem. Once confident that bugs are fixed, TTU_SYNC here can be removed, and the race tolerated. Link: https://lkml.kernel.org/r/c1e95853-8bcd-d8fd-55fa-e7f2488e78f@google.com Fixes: fec89c109f3a ("thp: rewrite freeze_page()/unfreeze_page() with generic rmap walkers") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:23:53 +00:00
* if page table locking is skipped: use TTU_SYNC to wait for that.
*/
if (flags & TTU_SYNC)
pvmw.flags = PVMW_SYNC;
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
if (flags & TTU_SPLIT_HUGE_PMD)
split_huge_pmd_address(vma, address, false, folio);
/*
mm: migration: fix migration of huge PMD shared pages The page migration code employs try_to_unmap() to try and unmap the source page. This is accomplished by using rmap_walk to find all vmas where the page is mapped. This search stops when page mapcount is zero. For shared PMD huge pages, the page map count is always 1 no matter the number of mappings. Shared mappings are tracked via the reference count of the PMD page. Therefore, try_to_unmap stops prematurely and does not completely unmap all mappings of the source page. This problem can result is data corruption as writes to the original source page can happen after contents of the page are copied to the target page. Hence, data is lost. This problem was originally seen as DB corruption of shared global areas after a huge page was soft offlined due to ECC memory errors. DB developers noticed they could reproduce the issue by (hotplug) offlining memory used to back huge pages. A simple testcase can reproduce the problem by creating a shared PMD mapping (note that this must be at least PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using migrate_pages() to migrate process pages between nodes while continually writing to the huge pages being migrated. To fix, have the try_to_unmap_one routine check for huge PMD sharing by calling huge_pmd_unshare for hugetlbfs huge pages. If it is a shared mapping it will be 'unshared' which removes the page table entry and drops the reference on the PMD page. After this, flush caches and TLB. mmu notifiers are called before locking page tables, but we can not be sure of PMD sharing until page tables are locked. Therefore, check for the possibility of PMD sharing before locking so that notifiers can prepare for the worst possible case. Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com [mike.kravetz@oracle.com: make _range_in_vma() a static inline] Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com Fixes: 39dde65c9940 ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 22:51:29 +00:00
* For THP, we have to assume the worse case ie pmd for invalidation.
* For hugetlb, it could be much worse if we need to do pud
* invalidation in the case of pmd sharing.
*
* Note that the folio can not be freed in this function as call of
* try_to_unmap() must hold a reference on the folio.
*/
range.end = vma_address_end(&pvmw);
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma->vm_mm,
mm/thp: fix vma_address() if virtual address below file offset Running certain tests with a DEBUG_VM kernel would crash within hours, on the total_mapcount BUG() in split_huge_page_to_list(), while trying to free up some memory by punching a hole in a shmem huge page: split's try_to_unmap() was unable to find all the mappings of the page (which, on a !DEBUG_VM kernel, would then keep the huge page pinned in memory). When that BUG() was changed to a WARN(), it would later crash on the VM_BUG_ON_VMA(end < vma->vm_start || start >= vma->vm_end, vma) in mm/internal.h:vma_address(), used by rmap_walk_file() for try_to_unmap(). vma_address() is usually correct, but there's a wraparound case when the vm_start address is unusually low, but vm_pgoff not so low: vma_address() chooses max(start, vma->vm_start), but that decides on the wrong address, because start has become almost ULONG_MAX. Rewrite vma_address() to be more careful about vm_pgoff; move the VM_BUG_ON_VMA() out of it, returning -EFAULT for errors, so that it can be safely used from page_mapped_in_vma() and page_address_in_vma() too. Add vma_address_end() to apply similar care to end address calculation, in page_vma_mapped_walk() and page_mkclean_one() and try_to_unmap_one(); though it raises a question of whether callers would do better to supply pvmw->end to page_vma_mapped_walk() - I chose not, for a smaller patch. An irritation is that their apparent generality breaks down on KSM pages, which cannot be located by the page->index that page_to_pgoff() uses: as commit 4b0ece6fa016 ("mm: migrate: fix remove_migration_pte() for ksm pages") once discovered. I dithered over the best thing to do about that, and have ended up with a VM_BUG_ON_PAGE(PageKsm) in both vma_address() and vma_address_end(); though the only place in danger of using it on them was try_to_unmap_one(). Sidenote: vma_address() and vma_address_end() now use compound_nr() on a head page, instead of thp_size(): to make the right calculation on a hugetlbfs page, whether or not THPs are configured. try_to_unmap() is used on hugetlbfs pages, but perhaps the wrong calculation never mattered. Link: https://lkml.kernel.org/r/caf1c1a3-7cfb-7f8f-1beb-ba816e932825@google.com Fixes: a8fa41ad2f6f ("mm, rmap: check all VMAs that PTE-mapped THP can be part of") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:23:56 +00:00
address, range.end);
if (folio_test_hugetlb(folio)) {
mm: migration: fix migration of huge PMD shared pages The page migration code employs try_to_unmap() to try and unmap the source page. This is accomplished by using rmap_walk to find all vmas where the page is mapped. This search stops when page mapcount is zero. For shared PMD huge pages, the page map count is always 1 no matter the number of mappings. Shared mappings are tracked via the reference count of the PMD page. Therefore, try_to_unmap stops prematurely and does not completely unmap all mappings of the source page. This problem can result is data corruption as writes to the original source page can happen after contents of the page are copied to the target page. Hence, data is lost. This problem was originally seen as DB corruption of shared global areas after a huge page was soft offlined due to ECC memory errors. DB developers noticed they could reproduce the issue by (hotplug) offlining memory used to back huge pages. A simple testcase can reproduce the problem by creating a shared PMD mapping (note that this must be at least PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using migrate_pages() to migrate process pages between nodes while continually writing to the huge pages being migrated. To fix, have the try_to_unmap_one routine check for huge PMD sharing by calling huge_pmd_unshare for hugetlbfs huge pages. If it is a shared mapping it will be 'unshared' which removes the page table entry and drops the reference on the PMD page. After this, flush caches and TLB. mmu notifiers are called before locking page tables, but we can not be sure of PMD sharing until page tables are locked. Therefore, check for the possibility of PMD sharing before locking so that notifiers can prepare for the worst possible case. Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com [mike.kravetz@oracle.com: make _range_in_vma() a static inline] Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com Fixes: 39dde65c9940 ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 22:51:29 +00:00
/*
* If sharing is possible, start and end will be adjusted
* accordingly.
*/
adjust_range_if_pmd_sharing_possible(vma, &range.start,
&range.end);
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
/* We need the huge page size for set_huge_pte_at() */
hsz = huge_page_size(hstate_vma(vma));
mm: migration: fix migration of huge PMD shared pages The page migration code employs try_to_unmap() to try and unmap the source page. This is accomplished by using rmap_walk to find all vmas where the page is mapped. This search stops when page mapcount is zero. For shared PMD huge pages, the page map count is always 1 no matter the number of mappings. Shared mappings are tracked via the reference count of the PMD page. Therefore, try_to_unmap stops prematurely and does not completely unmap all mappings of the source page. This problem can result is data corruption as writes to the original source page can happen after contents of the page are copied to the target page. Hence, data is lost. This problem was originally seen as DB corruption of shared global areas after a huge page was soft offlined due to ECC memory errors. DB developers noticed they could reproduce the issue by (hotplug) offlining memory used to back huge pages. A simple testcase can reproduce the problem by creating a shared PMD mapping (note that this must be at least PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using migrate_pages() to migrate process pages between nodes while continually writing to the huge pages being migrated. To fix, have the try_to_unmap_one routine check for huge PMD sharing by calling huge_pmd_unshare for hugetlbfs huge pages. If it is a shared mapping it will be 'unshared' which removes the page table entry and drops the reference on the PMD page. After this, flush caches and TLB. mmu notifiers are called before locking page tables, but we can not be sure of PMD sharing until page tables are locked. Therefore, check for the possibility of PMD sharing before locking so that notifiers can prepare for the worst possible case. Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com [mike.kravetz@oracle.com: make _range_in_vma() a static inline] Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com Fixes: 39dde65c9940 ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 22:51:29 +00:00
}
mmu_notifier_invalidate_range_start(&range);
while (page_vma_mapped_walk(&pvmw)) {
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
/* Unexpected PMD-mapped THP? */
VM_BUG_ON_FOLIO(!pvmw.pte, folio);
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
/*
* If the folio is in an mlock()d vma, we must not swap it out.
*/
if (!(flags & TTU_IGNORE_MLOCK) &&
(vma->vm_flags & VM_LOCKED)) {
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
/* Restore the mlock which got missed */
mm: handle large folio when large folio in VM_LOCKED VMA range If large folio is in the range of VM_LOCKED VMA, it should be mlocked to avoid being picked by page reclaim. Which may split the large folio and then mlock each pages again. Mlock this kind of large folio to prevent them being picked by page reclaim. For the large folio which cross the boundary of VM_LOCKED VMA or not fully mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is under memory pressure, this kind of large folio will be split and the pages ouf of VM_LOCKED VMA can be reclaimed. Ideally, for large folio, we should mlock it when the large folio is fully mapped to VMA and munlock it if any page are unmampped from VMA. But it's not easy to detect whether the large folio is fully mapped to VMA in some cases (like add/remove rmap). So we update mlock_vma_folio() and munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags. Let caller to decide whether they should call these two functions. For add rmap, only mlock normal 4K folio and postpone large folio handling to page reclaim phase. It is possible to reuse page table iterator to detect whether folio is fully mapped or not during page reclaim phase. For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly because rmap makes folio not fully mapped to VMA. Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com Signed-off-by: Yin Fengwei <fengwei.yin@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-18 07:33:17 +00:00
if (!folio_test_large(folio))
mlock_vma_folio(folio, vma);
page_vma_mapped_walk_done(&pvmw);
ret = false;
break;
mm: rmap use pte lock not mmap_sem to set PageMlocked KernelThreadSanitizer (ktsan) has shown that the down_read_trylock() of mmap_sem in try_to_unmap_one() (when going to set PageMlocked on a page found mapped in a VM_LOCKED vma) is ineffective against races with exit_mmap()'s munlock_vma_pages_all(), because mmap_sem is not held when tearing down an mm. But that's okay, those races are benign; and although we've believed for years in that ugly down_read_trylock(), it's unsuitable for the job, and frustrates the good intention of setting PageMlocked when it fails. It just doesn't matter if here we read vm_flags an instant before or after a racing mlock() or munlock() or exit_mmap() sets or clears VM_LOCKED: the syscalls (or exit) work their way up the address space (taking pt locks after updating vm_flags) to establish the final state. We do still need to be careful never to mark a page Mlocked (hence unevictable) by any race that will not be corrected shortly after. The page lock protects from many of the races, but not all (a page is not necessarily locked when it's unmapped). But the pte lock we just dropped is good to cover the rest (and serializes even with munlock_vma_pages_all(), so no special barriers required): now hold on to the pte lock while calling mlock_vma_page(). Is that lock ordering safe? Yes, that's how follow_page_pte() calls it, and how page_remove_rmap() calls the complementary clear_page_mlock(). This fixes the following case (though not a case which anyone has complained of), which mmap_sem did not: truncation's preliminary unmap_mapping_range() is supposed to remove even the anonymous COWs of filecache pages, and that might race with try_to_unmap_one() on a VM_LOCKED vma, so that mlock_vma_page() sets PageMlocked just after zap_pte_range() unmaps the page, causing "Bad page state (mlocked)" when freed. The pte lock protects against this. You could say that it also protects against the more ordinary case, racing with the preliminary unmapping of a filecache page itself: but in our current tree, that's independently protected by i_mmap_rwsem; and that race would be why "Bad page state (mlocked)" was seen before commit 48ec833b7851 ("Revert mm/memory.c: share the i_mmap_rwsem"). Vlastimil Babka points out another race which this patch protects against. try_to_unmap_one() might reach its mlock_vma_page() TestSetPageMlocked a moment after munlock_vma_pages_all() did its Phase 1 TestClearPageMlocked: leaving PageMlocked and unevictable when it should be evictable. mmap_sem is ineffective because exit_mmap() does not hold it; page lock ineffective because __munlock_pagevec() only takes it afterwards, in Phase 2; pte lock is effective because __munlock_pagevec_fill() takes it to get the page, after VM_LOCKED was cleared from vm_flags, so visible to try_to_unmap_one. Kirill Shutemov points out that if the compiler chooses to implement a "vma->vm_flags &= VM_WHATEVER" or "vma->vm_flags |= VM_WHATEVER" operation with an intermediate store of unrelated bits set, since I'm here foregoing its usual protection by mmap_sem, try_to_unmap_one() might catch sight of a spurious VM_LOCKED in vm_flags, and make the wrong decision. This does not appear to be an immediate problem, but we may want to define vm_flags accessors in future, to guard against such a possibility. While we're here, make a related optimization in try_to_munmap_one(): if it's doing TTU_MUNLOCK, then there's no point at all in descending the page tables and getting the pt lock, unless the vma is VM_LOCKED. Yes, that can change racily, but it can change racily even without the optimization: it's not critical. Far better not to waste time here. Stopped short of separating try_to_munlock_one() from try_to_munmap_one() on this occasion, but that's probably the sensible next step - with a rename, given that try_to_munlock()'s business is to try to set Mlocked. Updated the unevictable-lru Documentation, to remove its reference to mmap semaphore, but found a few more updates needed in just that area. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 02:49:33 +00:00
}
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pfn = pte_pfn(ptep_get(pvmw.pte));
subpage = folio_page(folio, pfn - folio_pfn(folio));
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
address = pvmw.address;
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
anon_exclusive = folio_test_anon(folio) &&
PageAnonExclusive(subpage);
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
if (folio_test_hugetlb(folio)) {
bool anon = folio_test_anon(folio);
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when unmapping On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When unmapping a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes, so we will nuke only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page. And now try_to_unmap() is only passed a hugetlb page in the case where the hugetlb page is poisoned. Which means now we will unmap only one pte entry for a CONT-PTE or CONT-PMD size poisoned hugetlb page, and we can still access other subpages of a CONT-PTE or CONT-PMD size poisoned hugetlb page, which will cause serious issues possibly. So we should change to use huge_ptep_clear_flush() to nuke the hugetlb page table to fix this issue, which already considered CONT-PTE and CONT-PMD size hugetlb. We've already used set_huge_swap_pte_at() to set a poisoned swap entry for a poisoned hugetlb page. Meanwhile adding a VM_BUG_ON() to make sure the passed hugetlb page is poisoned in try_to_unmap(). Link: https://lkml.kernel.org/r/0a2e547238cad5bc153a85c3e9658cb9d55f9cac.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/730ea4b6d292f32fb10b7a4e87dad49b0eb30474.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:56 +00:00
/*
* The try_to_unmap() is only passed a hugetlb page
* in the case where the hugetlb page is poisoned.
*/
VM_BUG_ON_PAGE(!PageHWPoison(subpage), subpage);
/*
* huge_pmd_unshare may unmap an entire PMD page.
* There is no way of knowing exactly which PMDs may
* be cached for this mm, so we must flush them all.
* start/end were already adjusted above to cover this
* range.
*/
flush_cache_range(vma, range.start, range.end);
/*
* To call huge_pmd_unshare, i_mmap_rwsem must be
* held in write mode. Caller needs to explicitly
* do this outside rmap routines.
hugetlb: use new vma_lock for pmd sharing synchronization The new hugetlb vma lock is used to address this race: Faulting thread Unsharing thread ... ... ptep = huge_pte_offset() or ptep = huge_pte_alloc() ... i_mmap_lock_write lock page table ptep invalid <------------------------ huge_pmd_unshare() Could be in a previously unlock_page_table sharing process or worse i_mmap_unlock_write ... The vma_lock is used as follows: - During fault processing. The lock is acquired in read mode before doing a page table lock and allocation (huge_pte_alloc). The lock is held until code is finished with the page table entry (ptep). - The lock must be held in write mode whenever huge_pmd_unshare is called. Lock ordering issues come into play when unmapping a page from all vmas mapping the page. The i_mmap_rwsem must be held to search for the vmas, and the vma lock must be held before calling unmap which will call huge_pmd_unshare. This is done today in: - try_to_migrate_one and try_to_unmap_ for page migration and memory error handling. In these routines we 'try' to obtain the vma lock and fail to unmap if unsuccessful. Calling routines already deal with the failure of unmapping. - hugetlb_vmdelete_list for truncation and hole punch. This routine also tries to acquire the vma lock. If it fails, it skips the unmapping. However, we can not have file truncation or hole punch fail because of contention. After hugetlb_vmdelete_list, truncation and hole punch call remove_inode_hugepages. remove_inode_hugepages checks for mapped pages and call hugetlb_unmap_file_page to unmap them. hugetlb_unmap_file_page is designed to drop locks and reacquire in the correct order to guarantee unmap success. Link: https://lkml.kernel.org/r/20220914221810.95771-9-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:09 +00:00
*
* We also must hold hugetlb vma_lock in write mode.
* Lock order dictates acquiring vma_lock BEFORE
* i_mmap_rwsem. We can only try lock here and fail
* if unsuccessful.
*/
hugetlb: use new vma_lock for pmd sharing synchronization The new hugetlb vma lock is used to address this race: Faulting thread Unsharing thread ... ... ptep = huge_pte_offset() or ptep = huge_pte_alloc() ... i_mmap_lock_write lock page table ptep invalid <------------------------ huge_pmd_unshare() Could be in a previously unlock_page_table sharing process or worse i_mmap_unlock_write ... The vma_lock is used as follows: - During fault processing. The lock is acquired in read mode before doing a page table lock and allocation (huge_pte_alloc). The lock is held until code is finished with the page table entry (ptep). - The lock must be held in write mode whenever huge_pmd_unshare is called. Lock ordering issues come into play when unmapping a page from all vmas mapping the page. The i_mmap_rwsem must be held to search for the vmas, and the vma lock must be held before calling unmap which will call huge_pmd_unshare. This is done today in: - try_to_migrate_one and try_to_unmap_ for page migration and memory error handling. In these routines we 'try' to obtain the vma lock and fail to unmap if unsuccessful. Calling routines already deal with the failure of unmapping. - hugetlb_vmdelete_list for truncation and hole punch. This routine also tries to acquire the vma lock. If it fails, it skips the unmapping. However, we can not have file truncation or hole punch fail because of contention. After hugetlb_vmdelete_list, truncation and hole punch call remove_inode_hugepages. remove_inode_hugepages checks for mapped pages and call hugetlb_unmap_file_page to unmap them. hugetlb_unmap_file_page is designed to drop locks and reacquire in the correct order to guarantee unmap success. Link: https://lkml.kernel.org/r/20220914221810.95771-9-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:09 +00:00
if (!anon) {
VM_BUG_ON(!(flags & TTU_RMAP_LOCKED));
if (!hugetlb_vma_trylock_write(vma)) {
page_vma_mapped_walk_done(&pvmw);
ret = false;
break;
}
if (huge_pmd_unshare(mm, vma, address, pvmw.pte)) {
hugetlb_vma_unlock_write(vma);
flush_tlb_range(vma,
range.start, range.end);
/*
* The ref count of the PMD page was
* dropped which is part of the way map
* counting is done for shared PMDs.
* Return 'true' here. When there is
* no other sharing, huge_pmd_unshare
* returns false and we will unmap the
* actual page and drop map count
* to zero.
*/
page_vma_mapped_walk_done(&pvmw);
break;
}
hugetlb_vma_unlock_write(vma);
mm: migration: fix migration of huge PMD shared pages The page migration code employs try_to_unmap() to try and unmap the source page. This is accomplished by using rmap_walk to find all vmas where the page is mapped. This search stops when page mapcount is zero. For shared PMD huge pages, the page map count is always 1 no matter the number of mappings. Shared mappings are tracked via the reference count of the PMD page. Therefore, try_to_unmap stops prematurely and does not completely unmap all mappings of the source page. This problem can result is data corruption as writes to the original source page can happen after contents of the page are copied to the target page. Hence, data is lost. This problem was originally seen as DB corruption of shared global areas after a huge page was soft offlined due to ECC memory errors. DB developers noticed they could reproduce the issue by (hotplug) offlining memory used to back huge pages. A simple testcase can reproduce the problem by creating a shared PMD mapping (note that this must be at least PUD_SIZE in size and PUD_SIZE aligned (1GB on x86)), and using migrate_pages() to migrate process pages between nodes while continually writing to the huge pages being migrated. To fix, have the try_to_unmap_one routine check for huge PMD sharing by calling huge_pmd_unshare for hugetlbfs huge pages. If it is a shared mapping it will be 'unshared' which removes the page table entry and drops the reference on the PMD page. After this, flush caches and TLB. mmu notifiers are called before locking page tables, but we can not be sure of PMD sharing until page tables are locked. Therefore, check for the possibility of PMD sharing before locking so that notifiers can prepare for the worst possible case. Link: http://lkml.kernel.org/r/20180823205917.16297-2-mike.kravetz@oracle.com [mike.kravetz@oracle.com: make _range_in_vma() a static inline] Link: http://lkml.kernel.org/r/6063f215-a5c8-2f0c-465a-2c515ddc952d@oracle.com Fixes: 39dde65c9940 ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05 22:51:29 +00:00
}
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when unmapping On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When unmapping a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes, so we will nuke only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page. And now try_to_unmap() is only passed a hugetlb page in the case where the hugetlb page is poisoned. Which means now we will unmap only one pte entry for a CONT-PTE or CONT-PMD size poisoned hugetlb page, and we can still access other subpages of a CONT-PTE or CONT-PMD size poisoned hugetlb page, which will cause serious issues possibly. So we should change to use huge_ptep_clear_flush() to nuke the hugetlb page table to fix this issue, which already considered CONT-PTE and CONT-PMD size hugetlb. We've already used set_huge_swap_pte_at() to set a poisoned swap entry for a poisoned hugetlb page. Meanwhile adding a VM_BUG_ON() to make sure the passed hugetlb page is poisoned in try_to_unmap(). Link: https://lkml.kernel.org/r/0a2e547238cad5bc153a85c3e9658cb9d55f9cac.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/730ea4b6d292f32fb10b7a4e87dad49b0eb30474.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:56 +00:00
pteval = huge_ptep_clear_flush(vma, address, pvmw.pte);
} else {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
flush_cache_page(vma, address, pfn);
mm: fix PageAnonExclusive clearing racing with concurrent RCU GUP-fast commit 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") made sure that when PageAnonExclusive() has to be cleared during temporary unmapping of a page, that the PTE is cleared/invalidated and that the TLB is flushed. What we want to achieve in all cases is that we cannot end up with a pin on an anonymous page that may be shared, because such pins would be unreliable and could result in memory corruptions when the mapped page and the pin go out of sync due to a write fault. That TLB flush handling was inspired by an outdated comment in mm/ksm.c:write_protect_page(), which similarly required the TLB flush in the past to synchronize with GUP-fast. However, ever since general RCU GUP fast was introduced in commit 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer sufficient to handle concurrent GUP-fast in all cases -- it only handles traditional IPI-based GUP-fast correctly. Peter Xu (thankfully) questioned whether that TLB flush is really required. On architectures that send an IPI broadcast on TLB flush, it works as expected. To synchronize with RCU GUP-fast properly, we're conceptually fine, however, we have to enforce a certain memory order and are missing memory barriers. Let's document that, avoid the TLB flush where possible and use proper explicit memory barriers where required. We shouldn't really care about the additional memory barriers here, as we're not on extremely hot paths -- and we're getting rid of some TLB flushes. We use a smp_mb() pair for handling concurrent pinning and a smp_rmb()/smp_wmb() pair for handling the corner case of only temporary PTE changes but permanent PageAnonExclusive changes. One extreme example, whereby GUP-fast takes a R/O pin and KSM wants to convert an exclusive anonymous page to a KSM page, and that page is already mapped write-protected (-> no PTE change) would be: Thread 0 (KSM) Thread 1 (GUP-fast) (B1) Read the PTE # (B2) skipped without FOLL_WRITE (A1) Clear PTE smp_mb() (A2) Check pinned (B3) Pin the mapped page smp_mb() (A3) Clear PageAnonExclusive smp_wmb() (A4) Restore PTE (B4) Check if the PTE changed smp_rmb() (B5) Check PageAnonExclusive Thread 1 will properly detect that PageAnonExclusive was cleared and back off. Note that we don't need a memory barrier between checking if the page is pinned and clearing PageAnonExclusive, because stores are not speculated. The possible issues due to reordering are of theoretical nature so far and attempts to reproduce the race failed. Especially the "no PTE change" case isn't the common case, because we'd need an exclusive anonymous page that's mapped R/O and the PTE is clean in KSM code -- and using KSM with page pinning isn't extremely common. Further, the clear+TLB flush we used for now implies a memory barrier. So the problematic missing part should be the missing memory barrier after pinning but before checking if the PTE changed. Link: https://lkml.kernel.org/r/20220901083559.67446-1-david@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Nadav Amit <namit@vmware.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Christoph von Recklinghausen <crecklin@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-01 08:35:59 +00:00
/* Nuke the page table entry. */
if (should_defer_flush(mm, flags)) {
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when unmapping On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When unmapping a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes, so we will nuke only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page. And now try_to_unmap() is only passed a hugetlb page in the case where the hugetlb page is poisoned. Which means now we will unmap only one pte entry for a CONT-PTE or CONT-PMD size poisoned hugetlb page, and we can still access other subpages of a CONT-PTE or CONT-PMD size poisoned hugetlb page, which will cause serious issues possibly. So we should change to use huge_ptep_clear_flush() to nuke the hugetlb page table to fix this issue, which already considered CONT-PTE and CONT-PMD size hugetlb. We've already used set_huge_swap_pte_at() to set a poisoned swap entry for a poisoned hugetlb page. Meanwhile adding a VM_BUG_ON() to make sure the passed hugetlb page is poisoned in try_to_unmap(). Link: https://lkml.kernel.org/r/0a2e547238cad5bc153a85c3e9658cb9d55f9cac.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/730ea4b6d292f32fb10b7a4e87dad49b0eb30474.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:56 +00:00
/*
* We clear the PTE but do not flush so potentially
* a remote CPU could still be writing to the folio.
* If the entry was previously clean then the
* architecture must guarantee that a clear->dirty
* transition on a cached TLB entry is written through
* and traps if the PTE is unmapped.
*/
pteval = ptep_get_and_clear(mm, address, pvmw.pte);
mm/tlbbatch: rename and extend some functions This patch does some preparation works to extend batched TLB flush to arm64. Including: - Extend set_tlb_ubc_flush_pending() and arch_tlbbatch_add_mm() to accept an additional argument for address, architectures like arm64 may need this for tlbi. - Rename arch_tlbbatch_add_mm() to arch_tlbbatch_add_pending() to match its current function since we don't need to handle mm on architectures like arm64 and add_mm is not proper, add_pending will make sense to both as on x86 we're pending the TLB flush operations while on arm64 we're pending the synchronize operations. This intends no functional changes on x86. Link: https://lkml.kernel.org/r/20230717131004.12662-3-yangyicong@huawei.com Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-17 13:10:02 +00:00
set_tlb_ubc_flush_pending(mm, pteval, address);
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when unmapping On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When unmapping a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes, so we will nuke only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page. And now try_to_unmap() is only passed a hugetlb page in the case where the hugetlb page is poisoned. Which means now we will unmap only one pte entry for a CONT-PTE or CONT-PMD size poisoned hugetlb page, and we can still access other subpages of a CONT-PTE or CONT-PMD size poisoned hugetlb page, which will cause serious issues possibly. So we should change to use huge_ptep_clear_flush() to nuke the hugetlb page table to fix this issue, which already considered CONT-PTE and CONT-PMD size hugetlb. We've already used set_huge_swap_pte_at() to set a poisoned swap entry for a poisoned hugetlb page. Meanwhile adding a VM_BUG_ON() to make sure the passed hugetlb page is poisoned in try_to_unmap(). Link: https://lkml.kernel.org/r/0a2e547238cad5bc153a85c3e9658cb9d55f9cac.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/730ea4b6d292f32fb10b7a4e87dad49b0eb30474.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:56 +00:00
} else {
pteval = ptep_clear_flush(vma, address, pvmw.pte);
}
}
mm: send one IPI per CPU to TLB flush all entries after unmapping pages An IPI is sent to flush remote TLBs when a page is unmapped that was potentially accesssed by other CPUs. There are many circumstances where this happens but the obvious one is kswapd reclaiming pages belonging to a running process as kswapd and the task are likely running on separate CPUs. On small machines, this is not a significant problem but as machine gets larger with more cores and more memory, the cost of these IPIs can be high. This patch uses a simple structure that tracks CPUs that potentially have TLB entries for pages being unmapped. When the unmapping is complete, the full TLB is flushed on the assumption that a refill cost is lower than flushing individual entries. Architectures wishing to do this must give the following guarantee. If a clean page is unmapped and not immediately flushed, the architecture must guarantee that a write to that linear address from a CPU with a cached TLB entry will trap a page fault. This is essentially what the kernel already depends on but the window is much larger with this patch applied and is worth highlighting. The architecture should consider whether the cost of the full TLB flush is higher than sending an IPI to flush each individual entry. An additional architecture helper called flush_tlb_local is required. It's a trivial wrapper with some accounting in the x86 case. The impact of this patch depends on the workload as measuring any benefit requires both mapped pages co-located on the LRU and memory pressure. The case with the biggest impact is multiple processes reading mapped pages taken from the vm-scalability test suite. The test case uses NR_CPU readers of mapped files that consume 10*RAM. Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%) Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%) Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 581.00 611.43 System 5804.93 4111.76 Elapsed 161.03 122.12 This is showing that the readers completed 24.40% faster with 29% less system CPU time. From vmstats, it is known that the vanilla kernel was interrupted roughly 900K times per second during the steady phase of the test and the patched kernel was interrupts 180K times per second. The impact is lower on a single socket machine. 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%) Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%) Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%) 4.2.0-rc1 4.2.0-rc1 vanilla flushfull-v7 User 58.09 57.64 System 111.82 76.56 Elapsed 27.29 22.55 It's still a noticeable improvement with vmstat showing interrupts went from roughly 500K per second to 45K per second. The patch will have no impact on workloads with no memory pressure or have relatively few mapped pages. It will have an unpredictable impact on the workload running on the CPU being flushed as it'll depend on how many TLB entries need to be refilled and how long that takes. Worst case, the TLB will be completely cleared of active entries when the target PFNs were not resident at all. [sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 22:47:32 +00:00
/*
* Now the pte is cleared. If this pte was uffd-wp armed,
* we may want to replace a none pte with a marker pte if
* it's file-backed, so we don't lose the tracking info.
*/
pte_install_uffd_wp_if_needed(vma, address, pvmw.pte, pteval);
/* Set the dirty flag on the folio now the pte is gone. */
if (pte_dirty(pteval))
folio_mark_dirty(folio);
/* Update high watermark before we lower rss */
update_hiwater_rss(mm);
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON After a memory error happens on a clean folio, a process unexpectedly receives SIGBUS when it accesses the error page. This SIGBUS killing is pointless and simply degrades the level of RAS of the system, because the clean folio can be dropped without any data lost on memory error handling as we do for a clean pagecache. When memory_failure() is called on a clean folio, try_to_unmap() is called twice (one from split_huge_page() and one from hwpoison_user_mappings()). The root cause of the issue is that pte conversion to hwpoisoned entry is now done in the first call of try_to_unmap() because PageHWPoison is already set at this point, while it's actually expected to be done in the second call. This behavior disturbs the error handling operation like removing pagecache, which results in the malfunction described above. So convert TTU_IGNORE_HWPOISON into TTU_HWPOISON and set TTU_HWPOISON only when we really intend to convert pte to hwpoison entry. This can prevent other callers of try_to_unmap() from accidentally converting to hwpoison entries. Link: https://lkml.kernel.org/r/20230221085905.1465385-1-naoya.horiguchi@linux.dev Fixes: a42634a6c07d ("readahead: Use a folio in read_pages()") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-21 08:59:05 +00:00
if (PageHWPoison(subpage) && (flags & TTU_HWPOISON)) {
pteval = swp_entry_to_pte(make_hwpoison_entry(subpage));
if (folio_test_hugetlb(folio)) {
hugetlb_count_sub(folio_nr_pages(folio), mm);
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
set_huge_pte_at(mm, address, pvmw.pte, pteval,
hsz);
} else {
dec_mm_counter(mm, mm_counter(&folio->page));
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
set_pte_at(mm, address, pvmw.pte, pteval);
}
[PATCH] mm: update_hiwaters just in time update_mem_hiwater has attracted various criticisms, in particular from those concerned with mm scalability. Originally it was called whenever rss or total_vm got raised. Then many of those callsites were replaced by a timer tick call from account_system_time. Now Frank van Maarseveen reports that to be found inadequate. How about this? Works for Frank. Replace update_mem_hiwater, a poor combination of two unrelated ops, by macros update_hiwater_rss and update_hiwater_vm. Don't attempt to keep mm->hiwater_rss up to date at timer tick, nor every time we raise rss (usually by 1): those are hot paths. Do the opposite, update only when about to lower rss (usually by many), or just before final accounting in do_exit. Handle mm->hiwater_vm in the same way, though it's much less of an issue. Demand that whoever collects these hiwater statistics do the work of taking the maximum with rss or total_vm. And there has been no collector of these hiwater statistics in the tree. The new convention needs an example, so match Frank's usage by adding a VmPeak line above VmSize to /proc/<pid>/status, and also a VmHWM line above VmRSS (High-Water-Mark or High-Water-Memory). There was a particular anomaly during mremap move, that hiwater_vm might be captured too high. A fleeting such anomaly remains, but it's quickly corrected now, whereas before it would stick. What locking? None: if the app is racy then these statistics will be racy, it's not worth any overhead to make them exact. But whenever it suits, hiwater_vm is updated under exclusive mmap_sem, and hiwater_rss under page_table_lock (for now) or with preemption disabled (later on): without going to any trouble, minimize the time between reading current values and updating, to minimize those occasions when a racing thread bumps a count up and back down in between. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 01:16:18 +00:00
} else if (pte_unused(pteval) && !userfaultfd_armed(vma)) {
/*
* The guest indicated that the page content is of no
* interest anymore. Simply discard the pte, vmscan
* will take care of the rest.
* A future reference will then fault in a new zero
* page. When userfaultfd is active, we must not drop
* this page though, as its main user (postcopy
* migration) will not expect userfaults on already
* copied pages.
*/
dec_mm_counter(mm, mm_counter(&folio->page));
} else if (folio_test_anon(folio)) {
mm/swap: stop using page->private on tail pages for THP_SWAP Patch series "mm/swap: stop using page->private on tail pages for THP_SWAP + cleanups". This series stops using page->private on tail pages for THP_SWAP, replaces folio->private by folio->swap for swapcache folios, and starts using "new_folio" for tail pages that we are splitting to remove the usage of page->private for swapcache handling completely. This patch (of 4): Let's stop using page->private on tail pages, making it possible to just unconditionally reuse that field in the tail pages of large folios. The remaining usage of the private field for THP_SWAP is in the THP splitting code (mm/huge_memory.c), that we'll handle separately later. Update the THP_SWAP documentation and sanity checks in mm_types.h and __split_huge_page_tail(). [david@redhat.com: stop using page->private on tail pages for THP_SWAP] Link: https://lkml.kernel.org/r/6f0a82a3-6948-20d9-580b-be1dbf415701@redhat.com Link: https://lkml.kernel.org/r/20230821160849.531668-1-david@redhat.com Link: https://lkml.kernel.org/r/20230821160849.531668-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Reviewed-by: Yosry Ahmed <yosryahmed@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-08-21 16:08:46 +00:00
swp_entry_t entry = page_swap_entry(subpage);
pte_t swp_pte;
/*
* Store the swap location in the pte.
* See handle_pte_fault() ...
*/
if (unlikely(folio_test_swapbacked(folio) !=
folio_test_swapcache(folio))) {
WARN_ON_ONCE(1);
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
/* MADV_FREE page check */
if (!folio_test_swapbacked(folio)) {
mm: fix race between MADV_FREE reclaim and blkdev direct IO read Problem: ======= Userspace might read the zero-page instead of actual data from a direct IO read on a block device if the buffers have been called madvise(MADV_FREE) on earlier (this is discussed below) due to a race between page reclaim on MADV_FREE and blkdev direct IO read. - Race condition: ============== During page reclaim, the MADV_FREE page check in try_to_unmap_one() checks if the page is not dirty, then discards its rmap PTE(s) (vs. remap back if the page is dirty). However, after try_to_unmap_one() returns to shrink_page_list(), it might keep the page _anyway_ if page_ref_freeze() fails (it expects exactly _one_ page reference, from the isolation for page reclaim). Well, blkdev_direct_IO() gets references for all pages, and on READ operations it only sets them dirty _later_. So, if MADV_FREE'd pages (i.e., not dirty) are used as buffers for direct IO read from block devices, and page reclaim happens during __blkdev_direct_IO[_simple]() exactly AFTER bio_iov_iter_get_pages() returns, but BEFORE the pages are set dirty, the situation happens. The direct IO read eventually completes. Now, when userspace reads the buffers, the PTE is no longer there and the page fault handler do_anonymous_page() services that with the zero-page, NOT the data! A synthetic reproducer is provided. - Page faults: =========== If page reclaim happens BEFORE bio_iov_iter_get_pages() the issue doesn't happen, because that faults-in all pages as writeable, so do_anonymous_page() sets up a new page/rmap/PTE, and that is used by direct IO. The userspace reads don't fault as the PTE is there (thus zero-page is not used/setup). But if page reclaim happens AFTER it / BEFORE setting pages dirty, the PTE is no longer there; the subsequent page faults can't help: The data-read from the block device probably won't generate faults due to DMA (no MMU) but even in the case it wouldn't use DMA, that happens on different virtual addresses (not user-mapped addresses) because `struct bio_vec` stores `struct page` to figure addresses out (which are different from user-mapped addresses) for the read. Thus userspace reads (to user-mapped addresses) still fault, then do_anonymous_page() gets another `struct page` that would address/ map to other memory than the `struct page` used by `struct bio_vec` for the read. (The original `struct page` is not available, since it wasn't freed, as page_ref_freeze() failed due to more page refs. And even if it were available, its data cannot be trusted anymore.) Solution: ======== One solution is to check for the expected page reference count in try_to_unmap_one(). There should be one reference from the isolation (that is also checked in shrink_page_list() with page_ref_freeze()) plus one or more references from page mapping(s) (put in discard: label). Further references mean that rmap/PTE cannot be unmapped/nuked. (Note: there might be more than one reference from mapping due to fork()/clone() without CLONE_VM, which use the same `struct page` for references, until the copy-on-write page gets copied.) So, additional page references (e.g., from direct IO read) now prevent the rmap/PTE from being unmapped/dropped; similarly to the page is not freed per shrink_page_list()/page_ref_freeze()). - Races and Barriers: ================== The new check in try_to_unmap_one() should be safe in races with bio_iov_iter_get_pages() in get_user_pages() fast and slow paths, as it's done under the PTE lock. The fast path doesn't take the lock, but it checks if the PTE has changed and if so, it drops the reference and leaves the page for the slow path (which does take that lock). The fast path requires synchronization w/ full memory barrier: it writes the page reference count first then it reads the PTE later, while try_to_unmap() writes PTE first then it reads page refcount. And a second barrier is needed, as the page dirty flag should not be read before the page reference count (as in __remove_mapping()). (This can be a load memory barrier only; no writes are involved.) Call stack/comments: - try_to_unmap_one() - page_vma_mapped_walk() - map_pte() # see pte_offset_map_lock(): pte_offset_map() spin_lock() - ptep_get_and_clear() # write PTE - smp_mb() # (new barrier) GUP fast path - page_ref_count() # (new check) read refcount - page_vma_mapped_walk_done() # see pte_unmap_unlock(): pte_unmap() spin_unlock() - bio_iov_iter_get_pages() - __bio_iov_iter_get_pages() - iov_iter_get_pages() - get_user_pages_fast() - internal_get_user_pages_fast() # fast path - lockless_pages_from_mm() - gup_{pgd,p4d,pud,pmd,pte}_range() ptep = pte_offset_map() # not _lock() pte = ptep_get_lockless(ptep) page = pte_page(pte) try_grab_compound_head(page) # inc refcount # (RMW/barrier # on success) if (pte_val(pte) != pte_val(*ptep)) # read PTE put_compound_head(page) # dec refcount # go slow path # slow path - __gup_longterm_unlocked() - get_user_pages_unlocked() - __get_user_pages_locked() - __get_user_pages() - follow_{page,p4d,pud,pmd}_mask() - follow_page_pte() ptep = pte_offset_map_lock() pte = *ptep page = vm_normal_page(pte) try_grab_page(page) # inc refcount pte_unmap_unlock() - Huge Pages: ========== Regarding transparent hugepages, that logic shouldn't change, as MADV_FREE (aka lazyfree) pages are PageAnon() && !PageSwapBacked() (madvise_free_pte_range() -> mark_page_lazyfree() -> lru_lazyfree_fn()) thus should reach shrink_page_list() -> split_huge_page_to_list() before try_to_unmap[_one](), so it deals with normal pages only. (And in case unlikely/TTU_SPLIT_HUGE_PMD/split_huge_pmd_address() happens, which should not or be rare, the page refcount should be greater than mapcount: the head page is referenced by tail pages. That also prevents checking the head `page` then incorrectly call page_remove_rmap(subpage) for a tail page, that isn't even in the shrink_page_list()'s page_list (an effect of split huge pmd/pmvw), as it might happen today in this unlikely scenario.) MADV_FREE'd buffers: =================== So, back to the "if MADV_FREE pages are used as buffers" note. The case is arguable, and subject to multiple interpretations. The madvise(2) manual page on the MADV_FREE advice value says: 1) 'After a successful MADV_FREE ... data will be lost when the kernel frees the pages.' 2) 'the free operation will be canceled if the caller writes into the page' / 'subsequent writes ... will succeed and then [the] kernel cannot free those dirtied pages' 3) 'If there is no subsequent write, the kernel can free the pages at any time.' Thoughts, questions, considerations... respectively: 1) Since the kernel didn't actually free the page (page_ref_freeze() failed), should the data not have been lost? (on userspace read.) 2) Should writes performed by the direct IO read be able to cancel the free operation? - Should the direct IO read be considered as 'the caller' too, as it's been requested by 'the caller'? - Should the bio technique to dirty pages on return to userspace (bio_check_pages_dirty() is called/used by __blkdev_direct_IO()) be considered in another/special way here? 3) Should an upcoming write from a previously requested direct IO read be considered as a subsequent write, so the kernel should not free the pages? (as it's known at the time of page reclaim.) And lastly: Technically, the last point would seem a reasonable consideration and balance, as the madvise(2) manual page apparently (and fairly) seem to assume that 'writes' are memory access from the userspace process (not explicitly considering writes from the kernel or its corner cases; again, fairly).. plus the kernel fix implementation for the corner case of the largely 'non-atomic write' encompassed by a direct IO read operation, is relatively simple; and it helps. Reproducer: ========== @ test.c (simplified, but works) #define _GNU_SOURCE #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/mman.h> int main() { int fd, i; char *buf; fd = open(DEV, O_RDONLY | O_DIRECT); buf = mmap(NULL, BUF_SIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); for (i = 0; i < BUF_SIZE; i += PAGE_SIZE) buf[i] = 1; // init to non-zero madvise(buf, BUF_SIZE, MADV_FREE); read(fd, buf, BUF_SIZE); for (i = 0; i < BUF_SIZE; i += PAGE_SIZE) printf("%p: 0x%x\n", &buf[i], buf[i]); return 0; } @ block/fops.c (formerly fs/block_dev.c) +#include <linux/swap.h> ... ... __blkdev_direct_IO[_simple](...) { ... + if (!strcmp(current->comm, "good")) + shrink_all_memory(ULONG_MAX); + ret = bio_iov_iter_get_pages(...); + + if (!strcmp(current->comm, "bad")) + shrink_all_memory(ULONG_MAX); ... } @ shell # NUM_PAGES=4 # PAGE_SIZE=$(getconf PAGE_SIZE) # yes | dd of=test.img bs=${PAGE_SIZE} count=${NUM_PAGES} # DEV=$(losetup -f --show test.img) # gcc -DDEV=\"$DEV\" \ -DBUF_SIZE=$((PAGE_SIZE * NUM_PAGES)) \ -DPAGE_SIZE=${PAGE_SIZE} \ test.c -o test # od -tx1 $DEV 0000000 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a 79 0a * 0040000 # mv test good # ./good 0x7f7c10418000: 0x79 0x7f7c10419000: 0x79 0x7f7c1041a000: 0x79 0x7f7c1041b000: 0x79 # mv good bad # ./bad 0x7fa1b8050000: 0x0 0x7fa1b8051000: 0x0 0x7fa1b8052000: 0x0 0x7fa1b8053000: 0x0 Note: the issue is consistent on v5.17-rc3, but it's intermittent with the support of MADV_FREE on v4.5 (60%-70% error; needs swap). [wrap do_direct_IO() in do_blockdev_direct_IO() @ fs/direct-io.c]. - v5.17-rc3: # for i in {1..1000}; do ./good; done \ | cut -d: -f2 | sort | uniq -c 4000 0x79 # mv good bad # for i in {1..1000}; do ./bad; done \ | cut -d: -f2 | sort | uniq -c 4000 0x0 # free | grep Swap Swap: 0 0 0 - v4.5: # for i in {1..1000}; do ./good; done \ | cut -d: -f2 | sort | uniq -c 4000 0x79 # mv good bad # for i in {1..1000}; do ./bad; done \ | cut -d: -f2 | sort | uniq -c 2702 0x0 1298 0x79 # swapoff -av swapoff /swap # for i in {1..1000}; do ./bad; done \ | cut -d: -f2 | sort | uniq -c 4000 0x79 Ceph/TCMalloc: ============= For documentation purposes, the use case driving the analysis/fix is Ceph on Ubuntu 18.04, as the TCMalloc library there still uses MADV_FREE to release unused memory to the system from the mmap'ed page heap (might be committed back/used again; it's not munmap'ed.) - PageHeap::DecommitSpan() -> TCMalloc_SystemRelease() -> madvise() - PageHeap::CommitSpan() -> TCMalloc_SystemCommit() -> do nothing. Note: TCMalloc switched back to MADV_DONTNEED a few commits after the release in Ubuntu 18.04 (google-perftools/gperftools 2.5), so the issue just 'disappeared' on Ceph on later Ubuntu releases but is still present in the kernel, and can be hit by other use cases. The observed issue seems to be the old Ceph bug #22464 [1], where checksum mismatches are observed (and instrumentation with buffer dumps shows zero-pages read from mmap'ed/MADV_FREE'd page ranges). The issue in Ceph was reasonably deemed a kernel bug (comment #50) and mostly worked around with a retry mechanism, but other parts of Ceph could still hit that (rocksdb). Anyway, it's less likely to be hit again as TCMalloc switched out of MADV_FREE by default. (Some kernel versions/reports from the Ceph bug, and relation with the MADV_FREE introduction/changes; TCMalloc versions not checked.) - 4.4 good - 4.5 (madv_free: introduction) - 4.9 bad - 4.10 good? maybe a swapless system - 4.12 (madv_free: no longer free instantly on swapless systems) - 4.13 bad [1] https://tracker.ceph.com/issues/22464 Thanks: ====== Several people contributed to analysis/discussions/tests/reproducers in the first stages when drilling down on ceph/tcmalloc/linux kernel: - Dan Hill - Dan Streetman - Dongdong Tao - Gavin Guo - Gerald Yang - Heitor Alves de Siqueira - Ioanna Alifieraki - Jay Vosburgh - Matthew Ruffell - Ponnuvel Palaniyappan Reviews, suggestions, corrections, comments: - Minchan Kim - Yu Zhao - Huang, Ying - John Hubbard - Christoph Hellwig [mfo@canonical.com: v4] Link: https://lkml.kernel.org/r/20220209202659.183418-1-mfo@canonical.comLink: https://lkml.kernel.org/r/20220131230255.789059-1-mfo@canonical.com Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages") Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Dan Hill <daniel.hill@canonical.com> Cc: Dan Streetman <dan.streetman@canonical.com> Cc: Dongdong Tao <dongdong.tao@canonical.com> Cc: Gavin Guo <gavin.guo@canonical.com> Cc: Gerald Yang <gerald.yang@canonical.com> Cc: Heitor Alves de Siqueira <halves@canonical.com> Cc: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com> Cc: Jay Vosburgh <jay.vosburgh@canonical.com> Cc: Matthew Ruffell <matthew.ruffell@canonical.com> Cc: Ponnuvel Palaniyappan <ponnuvel.palaniyappan@canonical.com> Cc: <stable@vger.kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25 01:14:09 +00:00
int ref_count, map_count;
/*
* Synchronize with gup_pte_range():
* - clear PTE; barrier; read refcount
* - inc refcount; barrier; read PTE
*/
smp_mb();
ref_count = folio_ref_count(folio);
map_count = folio_mapcount(folio);
/*
* Order reads for page refcount and dirty flag
* (see comments in __remove_mapping()).
*/
smp_rmb();
/*
* The only page refs must be one from isolation
* plus the rmap(s) (dropped by discard:).
*/
if (ref_count == 1 + map_count &&
!folio_test_dirty(folio)) {
dec_mm_counter(mm, MM_ANONPAGES);
goto discard;
}
/*
* If the folio was redirtied, it cannot be
* discarded. Remap the page to page table.
*/
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
set_pte_at(mm, address, pvmw.pte, pteval);
folio_set_swapbacked(folio);
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:54:53 +00:00
if (swap_duplicate(entry) < 0) {
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
set_pte_at(mm, address, pvmw.pte, pteval);
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
if (arch_unmap_one(mm, vma, address, pteval) < 0) {
mm/rmap: fix missing swap_free() in try_to_unmap() after arch_unmap_one() failed Patch series "mm: COW fixes part 2: reliable GUP pins of anonymous pages", v4. This series is the result of the discussion on the previous approach [2]. More information on the general COW issues can be found there. It is based on latest linus/master (post v5.17, with relevant core-MM changes for v5.18-rc1). This series fixes memory corruptions when a GUP pin (FOLL_PIN) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP pin lost synchronicity with the pages mapped into the page tables. This issue, including other related COW issues, has been summarized in [3] under 3): " 3. Intra Process Memory Corruptions due to Wrong COW (FOLL_PIN) page_maybe_dma_pinned() is used to check if a page may be pinned for DMA (using FOLL_PIN instead of FOLL_GET). While false positives are tolerable, false negatives are problematic: pages that are pinned for DMA must not be added to the swapcache. If it happens, the (now pinned) page could be faulted back from the swapcache into page tables read-only. Future write-access would detect the pinning and COW the page, losing synchronicity. For the interested reader, this is nicely documented in feb889fb40fa ("mm: don't put pinned pages into the swap cache"). Peter reports [8] that page_maybe_dma_pinned() as used is racy in some cases and can result in a violation of the documented semantics: giving false negatives because of the race. There are cases where we call it without properly taking a per-process sequence lock, turning the usage of page_maybe_dma_pinned() racy. While one case (clear_refs SOFTDIRTY tracking, see below) seems to be easy to handle, there is especially one rmap case (shrink_page_list) that's hard to fix: in the rmap world, we're not limited to a single process. The shrink_page_list() issue is really subtle. If we race with someone pinning a page, we can trigger the same issue as in the FOLL_GET case. See the detail section at the end of this mail on a discussion how bad this can bite us with VFIO or other FOLL_PIN user. It's harder to reproduce, but I managed to modify the O_DIRECT reproducer to use io_uring fixed buffers [15] instead, which ends up using FOLL_PIN | FOLL_WRITE | FOLL_LONGTERM to pin buffer pages and can similarly trigger a loss of synchronicity and consequently a memory corruption. Again, the root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " This series makes GUP pins (R/O and R/W) on anonymous pages fully reliable, especially also taking care of concurrent pinning via GUP-fast, for example, also fully fixing an issue reported regarding NUMA balancing [4] recently. While doing that, it further reduces "unnecessary COWs", especially when we don't fork()/KSM and don't swapout, and fixes the COW security for hugetlb for FOLL_PIN. In summary, we track via a pageflag (PG_anon_exclusive) whether a mapped anonymous page is exclusive. Exclusive anonymous pages that are mapped R/O can directly be mapped R/W by the COW logic in the write fault handler. Exclusive anonymous pages that want to be shared (fork(), KSM) first have to be marked shared -- which will fail if there are GUP pins on the page. GUP is only allowed to take a pin on anonymous pages that are exclusive. The PT lock is the primary mechanism to synchronize modifications of PG_anon_exclusive. We synchronize against GUP-fast either via the src_mm->write_protect_seq (during fork()) or via clear/invalidate+flush of the relevant page table entry. Special care has to be taken about swap, migration, and THPs (whereby a PMD-mapping can be converted to a PTE mapping and we have to track information for subpages). Besides these, we let the rmap code handle most magic. For reliable R/O pins of anonymous pages, we need FAULT_FLAG_UNSHARE logic as part of our previous approach [2], however, it's now 100% mapcount free and I further simplified it a bit. #1 is a fix #3-#10 are mostly rmap preparations for PG_anon_exclusive handling #11 introduces PG_anon_exclusive #12 uses PG_anon_exclusive and make R/W pins of anonymous pages reliable #13 is a preparation for reliable R/O pins #14 and #15 is reused/modified GUP-triggered unsharing for R/O GUP pins make R/O pins of anonymous pages reliable #16 adds sanity check when (un)pinning anonymous pages [1] https://lkml.kernel.org/r/20220131162940.210846-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com [4] https://bugzilla.kernel.org/show_bug.cgi?id=215616 This patch (of 17): In case arch_unmap_one() fails, we already did a swap_duplicate(). let's undo that properly via swap_free(). Link: https://lkml.kernel.org/r/20220428083441.37290-1-david@redhat.com Link: https://lkml.kernel.org/r/20220428083441.37290-2-david@redhat.com Fixes: ca827d55ebaa ("mm, swap: Add infrastructure for saving page metadata on swap") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:42 +00:00
swap_free(entry);
set_pte_at(mm, address, pvmw.pte, pteval);
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
mm: fix PageAnonExclusive clearing racing with concurrent RCU GUP-fast commit 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") made sure that when PageAnonExclusive() has to be cleared during temporary unmapping of a page, that the PTE is cleared/invalidated and that the TLB is flushed. What we want to achieve in all cases is that we cannot end up with a pin on an anonymous page that may be shared, because such pins would be unreliable and could result in memory corruptions when the mapped page and the pin go out of sync due to a write fault. That TLB flush handling was inspired by an outdated comment in mm/ksm.c:write_protect_page(), which similarly required the TLB flush in the past to synchronize with GUP-fast. However, ever since general RCU GUP fast was introduced in commit 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer sufficient to handle concurrent GUP-fast in all cases -- it only handles traditional IPI-based GUP-fast correctly. Peter Xu (thankfully) questioned whether that TLB flush is really required. On architectures that send an IPI broadcast on TLB flush, it works as expected. To synchronize with RCU GUP-fast properly, we're conceptually fine, however, we have to enforce a certain memory order and are missing memory barriers. Let's document that, avoid the TLB flush where possible and use proper explicit memory barriers where required. We shouldn't really care about the additional memory barriers here, as we're not on extremely hot paths -- and we're getting rid of some TLB flushes. We use a smp_mb() pair for handling concurrent pinning and a smp_rmb()/smp_wmb() pair for handling the corner case of only temporary PTE changes but permanent PageAnonExclusive changes. One extreme example, whereby GUP-fast takes a R/O pin and KSM wants to convert an exclusive anonymous page to a KSM page, and that page is already mapped write-protected (-> no PTE change) would be: Thread 0 (KSM) Thread 1 (GUP-fast) (B1) Read the PTE # (B2) skipped without FOLL_WRITE (A1) Clear PTE smp_mb() (A2) Check pinned (B3) Pin the mapped page smp_mb() (A3) Clear PageAnonExclusive smp_wmb() (A4) Restore PTE (B4) Check if the PTE changed smp_rmb() (B5) Check PageAnonExclusive Thread 1 will properly detect that PageAnonExclusive was cleared and back off. Note that we don't need a memory barrier between checking if the page is pinned and clearing PageAnonExclusive, because stores are not speculated. The possible issues due to reordering are of theoretical nature so far and attempts to reproduce the race failed. Especially the "no PTE change" case isn't the common case, because we'd need an exclusive anonymous page that's mapped R/O and the PTE is clean in KSM code -- and using KSM with page pinning isn't extremely common. Further, the clear+TLB flush we used for now implies a memory barrier. So the problematic missing part should be the missing memory barrier after pinning but before checking if the PTE changed. Link: https://lkml.kernel.org/r/20220901083559.67446-1-david@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Nadav Amit <namit@vmware.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Christoph von Recklinghausen <crecklin@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-01 08:35:59 +00:00
/* See page_try_share_anon_rmap(): clear PTE first. */
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (anon_exclusive &&
page_try_share_anon_rmap(subpage)) {
swap_free(entry);
set_pte_at(mm, address, pvmw.pte, pteval);
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
if (list_empty(&mm->mmlist)) {
spin_lock(&mmlist_lock);
if (list_empty(&mm->mmlist))
list_add(&mm->mmlist, &init_mm.mmlist);
spin_unlock(&mmlist_lock);
}
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:54:53 +00:00
dec_mm_counter(mm, MM_ANONPAGES);
inc_mm_counter(mm, MM_SWAPENTS);
swp_pte = swp_entry_to_pte(entry);
mm/swap: remember PG_anon_exclusive via a swp pte bit Patch series "mm: COW fixes part 3: reliable GUP R/W FOLL_GET of anonymous pages", v2. This series fixes memory corruptions when a GUP R/W reference (FOLL_WRITE | FOLL_GET) was taken on an anonymous page and COW logic fails to detect exclusivity of the page to then replacing the anonymous page by a copy in the page table: The GUP reference lost synchronicity with the pages mapped into the page tables. This series focuses on x86, arm64, s390x and ppc64/book3s -- other architectures are fairly easy to support by implementing __HAVE_ARCH_PTE_SWP_EXCLUSIVE. This primarily fixes the O_DIRECT memory corruptions that can happen on concurrent swapout, whereby we lose DMA reads to a page (modifying the user page by writing to it). O_DIRECT currently uses FOLL_GET for short-term (!FOLL_LONGTERM) DMA from/to a user page. In the long run, we want to convert it to properly use FOLL_PIN, and John is working on it, but that might take a while and might not be easy to backport. In the meantime, let's restore what used to work before we started modifying our COW logic: make R/W FOLL_GET references reliable as long as there is no fork() after GUP involved. This is just the natural follow-up of part 2, that will also further reduce "wrong COW" on the swapin path, for example, when we cannot remove a page from the swapcache due to concurrent writeback, or if we have two threads faulting on the same swapped-out page. Fixing O_DIRECT is just a nice side-product This issue, including other related COW issues, has been summarized in [3] under 2): " 2. Intra Process Memory Corruptions due to Wrong COW (FOLL_GET) It was discovered that we can create a memory corruption by reading a file via O_DIRECT to a part (e.g., first 512 bytes) of a page, concurrently writing to an unrelated part (e.g., last byte) of the same page, and concurrently write-protecting the page via clear_refs SOFTDIRTY tracking [6]. For the reproducer, the issue is that O_DIRECT grabs a reference of the target page (via FOLL_GET) and clear_refs write-protects the relevant page table entry. On successive write access to the page from the process itself, we wrongly COW the page when resolving the write fault, resulting in a loss of synchronicity and consequently a memory corruption. While some people might think that using clear_refs in this combination is a corner cases, it turns out to be a more generic problem unfortunately. For example, it was just recently discovered that we can similarly create a memory corruption without clear_refs, simply by concurrently swapping out the buffer pages [7]. Note that we nowadays even use the swap infrastructure in Linux without an actual swap disk/partition: the prime example is zram which is enabled as default under Fedora [10]. The root issue is that a write-fault on a page that has additional references results in a COW and thereby a loss of synchronicity and consequently a memory corruption if two parties believe they are referencing the same page. " We don't particularly care about R/O FOLL_GET references: they were never reliable and O_DIRECT doesn't expect to observe modifications from a page after DMA was started. Note that: * this only fixes the issue on x86, arm64, s390x and ppc64/book3s ("enterprise architectures"). Other architectures have to implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE to achieve the same. * this does *not * consider any kind of fork() after taking the reference: fork() after GUP never worked reliably with FOLL_GET. * Not losing PG_anon_exclusive during swapout was the last remaining piece. KSM already makes sure that there are no other references on a page before considering it for sharing. Page migration maintains PG_anon_exclusive and simply fails when there are additional references (freezing the refcount fails). Only swapout code dropped the PG_anon_exclusive flag because it requires more work to remember + restore it. With this series in place, most COW issues of [3] are fixed on said architectures. Other architectures can implement __HAVE_ARCH_PTE_SWP_EXCLUSIVE fairly easily. [1] https://lkml.kernel.org/r/20220329160440.193848-1-david@redhat.com [2] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [3] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 8): Currently, we clear PG_anon_exclusive in try_to_unmap() and forget about it. We do this, to keep fork() logic on swap entries easy and efficient: for example, if we wouldn't clear it when unmapping, we'd have to lookup the page in the swapcache for each and every swap entry during fork() and clear PG_anon_exclusive if set. Instead, we want to store that information directly in the swap pte, protected by the page table lock, similarly to how we handle SWP_MIGRATION_READ_EXCLUSIVE for migration entries. However, for actual swap entries, we don't want to mess with the swap type (e.g., still one bit) because it overcomplicates swap code. In try_to_unmap(), we already reject to unmap in case the page might be pinned, because we must not lose PG_anon_exclusive on pinned pages ever. Checking if there are other unexpected references reliably *before* completely unmapping a page is unfortunately not really possible: THP heavily overcomplicate the situation. Once fully unmapped it's easier -- we, for example, make sure that there are no unexpected references *after* unmapping a page before starting writeback on that page. So, we currently might end up unmapping a page and clearing PG_anon_exclusive if that page has additional references, for example, due to a FOLL_GET. do_swap_page() has to re-determine if a page is exclusive, which will easily fail if there are other references on a page, most prominently GUP references via FOLL_GET. This can currently result in memory corruptions when taking a FOLL_GET | FOLL_WRITE reference on a page even when fork() is never involved: try_to_unmap() will succeed, and when refaulting the page, it cannot be marked exclusive and will get replaced by a copy in the page tables on the next write access, resulting in writes via the GUP reference to the page being lost. In an ideal world, everybody that uses GUP and wants to modify page content, such as O_DIRECT, would properly use FOLL_PIN. However, that conversion will take a while. It's easier to fix what used to work in the past (FOLL_GET | FOLL_WRITE) remembering PG_anon_exclusive. In addition, by remembering PG_anon_exclusive we can further reduce unnecessary COW in some cases, so it's the natural thing to do. So let's transfer the PG_anon_exclusive information to the swap pte and store it via an architecture-dependant pte bit; use that information when restoring the swap pte in do_swap_page() and unuse_pte(). During fork(), we simply have to clear the pte bit and are done. Of course, there is one corner case to handle: swap backends that don't support concurrent page modifications while the page is under writeback. Special case these, and drop the exclusive marker. Add a comment why that is just fine (also, reuse_swap_page() would have done the same in the past). In the future, we'll hopefully have all architectures support __HAVE_ARCH_PTE_SWP_EXCLUSIVE, such that we can get rid of the empty stubs and the define completely. Then, we can also convert SWP_MIGRATION_READ_EXCLUSIVE. For architectures it's fairly easy to support: either simply use a yet unused pte bit that can be used for swap entries, steal one from the arch type bits if they exceed 5, or steal one from the offset bits. Note: R/O FOLL_GET references were never really reliable, especially when taking one on a shared page and then writing to the page (e.g., GUP after fork()). FOLL_GET, including R/W references, were never really reliable once fork was involved (e.g., GUP before fork(), GUP during fork()). KSM steps back in case it stumbles over unexpected references and is, therefore, fine. [david@redhat.com: fix SWP_STABLE_WRITES test] Link: https://lkml.kernel.org/r/ac725bcb-313a-4fff-250a-68ba9a8f85fb@redhat.comLink: https://lkml.kernel.org/r/20220329164329.208407-1-david@redhat.com Link: https://lkml.kernel.org/r/20220329164329.208407-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:45 +00:00
if (anon_exclusive)
swp_pte = pte_swp_mkexclusive(swp_pte);
if (pte_soft_dirty(pteval))
swp_pte = pte_swp_mksoft_dirty(swp_pte);
userfaultfd: wp: support swap and page migration For either swap and page migration, we all use the bit 2 of the entry to identify whether this entry is uffd write-protected. It plays a similar role as the existing soft dirty bit in swap entries but only for keeping the uffd-wp tracking for a specific PTE/PMD. Something special here is that when we want to recover the uffd-wp bit from a swap/migration entry to the PTE bit we'll also need to take care of the _PAGE_RW bit and make sure it's cleared, otherwise even with the _PAGE_UFFD_WP bit we can't trap it at all. In change_pte_range() we do nothing for uffd if the PTE is a swap entry. That can lead to data mismatch if the page that we are going to write protect is swapped out when sending the UFFDIO_WRITEPROTECT. This patch also applies/removes the uffd-wp bit even for the swap entries. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-11-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 03:06:01 +00:00
if (pte_uffd_wp(pteval))
swp_pte = pte_swp_mkuffd_wp(swp_pte);
Revert "rmap: do not call mmu_notifier_invalidate_page() under ptl" This reverts commit aac2fea94f7a3df8ad1eeb477eb2643f81fd5393. It turns out that that patch was complete and utter garbage, and broke KVM, resulting in odd oopses. Quoting Andrea Arcangeli: "The aforementioned commit has 3 bugs. 1) mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range. So all cases (THP on/off) are broken right now. To fix this is enough to replace mmu_notifier_invalidate_range with mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end. Either that or call multiple mmu_notifier_invalidate_page like before. 2) address + (1UL << compound_order(page) is buggy, it should be PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not 512. 3) The whole invalidate_range thing was an attempt to call a single invalidate while walking multiple 4k ptes that maps the same THP (after a pmd virtual split without physical compound page THP split). It's unclear if the rmap_walk will always provide an address that is 2M aligned as parameter to try_to_unmap_one, in presence of THP. I think it needs also an address &= (PAGE_SIZE << compound_order(page)) - 1 to be safe" In general, we should stop making excuses for horrible MMU notifier users. It's much more important that the core VM is sane and safe, than letting MMU notifiers sleep. So if some MMU notifier is sleeping under a spinlock, we need to fix the notifier, not try to make excuses for that garbage in the core VM. Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-29 16:11:06 +00:00
set_pte_at(mm, address, pvmw.pte, swp_pte);
mm/mmu_notifier: avoid double notification when it is useless This patch only affects users of mmu_notifier->invalidate_range callback which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ... and it is an optimization for those users. Everyone else is unaffected by it. When clearing a pte/pmd we are given a choice to notify the event under the page table lock (notify version of *_clear_flush helpers do call the mmu_notifier_invalidate_range). But that notification is not necessary in all cases. This patch removes almost all cases where it is useless to have a call to mmu_notifier_invalidate_range before mmu_notifier_invalidate_range_end. It also adds documentation in all those cases explaining why. Below is a more in depth analysis of why this is fine to do this: For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when device use thing like ATS/PASID to get the IOMMU to walk the CPU page table to access a process virtual address space). There is only 2 cases when you need to notify those secondary TLB while holding page table lock when clearing a pte/pmd: A) page backing address is free before mmu_notifier_invalidate_range_end B) a page table entry is updated to point to a new page (COW, write fault on zero page, __replace_page(), ...) Case A is obvious you do not want to take the risk for the device to write to a page that might now be used by something completely different. Case B is more subtle. For correctness it requires the following sequence to happen: - take page table lock - clear page table entry and notify (pmd/pte_huge_clear_flush_notify()) - set page table entry to point to new page If clearing the page table entry is not followed by a notify before setting the new pte/pmd value then you can break memory model like C11 or C++11 for the device. Consider the following scenario (device use a feature similar to ATS/ PASID): Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we assume they are write protected for COW (other case of B apply too). [Time N] ----------------------------------------------------------------- CPU-thread-0 {try to write to addrA} CPU-thread-1 {try to write to addrB} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA and populate device TLB} DEV-thread-2 {read addrB and populate device TLB} [Time N+1] --------------------------------------------------------------- CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+2] --------------------------------------------------------------- CPU-thread-0 {COW_step1: {update page table point to new page for addrA}} CPU-thread-1 {COW_step1: {update page table point to new page for addrB}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {write to addrA which is a write to new page} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {} CPU-thread-3 {write to addrB which is a write to new page} DEV-thread-0 {} DEV-thread-2 {} [Time N+4] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+5] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA from old page} DEV-thread-2 {read addrB from new page} So here because at time N+2 the clear page table entry was not pair with a notification to invalidate the secondary TLB, the device see the new value for addrB before seing the new value for addrA. This break total memory ordering for the device. When changing a pte to write protect or to point to a new write protected page with same content (KSM) it is ok to delay invalidate_range callback to mmu_notifier_invalidate_range_end() outside the page table lock. This is true even if the thread doing page table update is preempted right after releasing page table lock before calling mmu_notifier_invalidate_range_end Thanks to Andrea for thinking of a problematic scenario for COW. [jglisse@redhat.com: v2] Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alistair Popple <alistair@popple.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:34:07 +00:00
} else {
/*
* This is a locked file-backed folio,
* so it cannot be removed from the page
* cache and replaced by a new folio before
* mmu_notifier_invalidate_range_end, so no
* concurrent thread might update its page table
* to point at a new folio while a device is
* still using this folio.
mm/mmu_notifier: avoid double notification when it is useless This patch only affects users of mmu_notifier->invalidate_range callback which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ... and it is an optimization for those users. Everyone else is unaffected by it. When clearing a pte/pmd we are given a choice to notify the event under the page table lock (notify version of *_clear_flush helpers do call the mmu_notifier_invalidate_range). But that notification is not necessary in all cases. This patch removes almost all cases where it is useless to have a call to mmu_notifier_invalidate_range before mmu_notifier_invalidate_range_end. It also adds documentation in all those cases explaining why. Below is a more in depth analysis of why this is fine to do this: For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when device use thing like ATS/PASID to get the IOMMU to walk the CPU page table to access a process virtual address space). There is only 2 cases when you need to notify those secondary TLB while holding page table lock when clearing a pte/pmd: A) page backing address is free before mmu_notifier_invalidate_range_end B) a page table entry is updated to point to a new page (COW, write fault on zero page, __replace_page(), ...) Case A is obvious you do not want to take the risk for the device to write to a page that might now be used by something completely different. Case B is more subtle. For correctness it requires the following sequence to happen: - take page table lock - clear page table entry and notify (pmd/pte_huge_clear_flush_notify()) - set page table entry to point to new page If clearing the page table entry is not followed by a notify before setting the new pte/pmd value then you can break memory model like C11 or C++11 for the device. Consider the following scenario (device use a feature similar to ATS/ PASID): Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we assume they are write protected for COW (other case of B apply too). [Time N] ----------------------------------------------------------------- CPU-thread-0 {try to write to addrA} CPU-thread-1 {try to write to addrB} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA and populate device TLB} DEV-thread-2 {read addrB and populate device TLB} [Time N+1] --------------------------------------------------------------- CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+2] --------------------------------------------------------------- CPU-thread-0 {COW_step1: {update page table point to new page for addrA}} CPU-thread-1 {COW_step1: {update page table point to new page for addrB}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {write to addrA which is a write to new page} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {} CPU-thread-3 {write to addrB which is a write to new page} DEV-thread-0 {} DEV-thread-2 {} [Time N+4] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+5] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA from old page} DEV-thread-2 {read addrB from new page} So here because at time N+2 the clear page table entry was not pair with a notification to invalidate the secondary TLB, the device see the new value for addrB before seing the new value for addrA. This break total memory ordering for the device. When changing a pte to write protect or to point to a new write protected page with same content (KSM) it is ok to delay invalidate_range callback to mmu_notifier_invalidate_range_end() outside the page table lock. This is true even if the thread doing page table update is preempted right after releasing page table lock before calling mmu_notifier_invalidate_range_end Thanks to Andrea for thinking of a problematic scenario for COW. [jglisse@redhat.com: v2] Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alistair Popple <alistair@popple.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:34:07 +00:00
*
* See Documentation/mm/mmu_notifier.rst
mm/mmu_notifier: avoid double notification when it is useless This patch only affects users of mmu_notifier->invalidate_range callback which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ... and it is an optimization for those users. Everyone else is unaffected by it. When clearing a pte/pmd we are given a choice to notify the event under the page table lock (notify version of *_clear_flush helpers do call the mmu_notifier_invalidate_range). But that notification is not necessary in all cases. This patch removes almost all cases where it is useless to have a call to mmu_notifier_invalidate_range before mmu_notifier_invalidate_range_end. It also adds documentation in all those cases explaining why. Below is a more in depth analysis of why this is fine to do this: For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when device use thing like ATS/PASID to get the IOMMU to walk the CPU page table to access a process virtual address space). There is only 2 cases when you need to notify those secondary TLB while holding page table lock when clearing a pte/pmd: A) page backing address is free before mmu_notifier_invalidate_range_end B) a page table entry is updated to point to a new page (COW, write fault on zero page, __replace_page(), ...) Case A is obvious you do not want to take the risk for the device to write to a page that might now be used by something completely different. Case B is more subtle. For correctness it requires the following sequence to happen: - take page table lock - clear page table entry and notify (pmd/pte_huge_clear_flush_notify()) - set page table entry to point to new page If clearing the page table entry is not followed by a notify before setting the new pte/pmd value then you can break memory model like C11 or C++11 for the device. Consider the following scenario (device use a feature similar to ATS/ PASID): Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we assume they are write protected for COW (other case of B apply too). [Time N] ----------------------------------------------------------------- CPU-thread-0 {try to write to addrA} CPU-thread-1 {try to write to addrB} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA and populate device TLB} DEV-thread-2 {read addrB and populate device TLB} [Time N+1] --------------------------------------------------------------- CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+2] --------------------------------------------------------------- CPU-thread-0 {COW_step1: {update page table point to new page for addrA}} CPU-thread-1 {COW_step1: {update page table point to new page for addrB}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {write to addrA which is a write to new page} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {} CPU-thread-3 {write to addrB which is a write to new page} DEV-thread-0 {} DEV-thread-2 {} [Time N+4] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+5] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA from old page} DEV-thread-2 {read addrB from new page} So here because at time N+2 the clear page table entry was not pair with a notification to invalidate the secondary TLB, the device see the new value for addrB before seing the new value for addrA. This break total memory ordering for the device. When changing a pte to write protect or to point to a new write protected page with same content (KSM) it is ok to delay invalidate_range callback to mmu_notifier_invalidate_range_end() outside the page table lock. This is true even if the thread doing page table update is preempted right after releasing page table lock before calling mmu_notifier_invalidate_range_end Thanks to Andrea for thinking of a problematic scenario for COW. [jglisse@redhat.com: v2] Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alistair Popple <alistair@popple.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:34:07 +00:00
*/
dec_mm_counter(mm, mm_counter_file(&folio->page));
mm/mmu_notifier: avoid double notification when it is useless This patch only affects users of mmu_notifier->invalidate_range callback which are device drivers related to ATS/PASID, CAPI, IOMMUv2, SVM ... and it is an optimization for those users. Everyone else is unaffected by it. When clearing a pte/pmd we are given a choice to notify the event under the page table lock (notify version of *_clear_flush helpers do call the mmu_notifier_invalidate_range). But that notification is not necessary in all cases. This patch removes almost all cases where it is useless to have a call to mmu_notifier_invalidate_range before mmu_notifier_invalidate_range_end. It also adds documentation in all those cases explaining why. Below is a more in depth analysis of why this is fine to do this: For secondary TLB (non CPU TLB) like IOMMU TLB or device TLB (when device use thing like ATS/PASID to get the IOMMU to walk the CPU page table to access a process virtual address space). There is only 2 cases when you need to notify those secondary TLB while holding page table lock when clearing a pte/pmd: A) page backing address is free before mmu_notifier_invalidate_range_end B) a page table entry is updated to point to a new page (COW, write fault on zero page, __replace_page(), ...) Case A is obvious you do not want to take the risk for the device to write to a page that might now be used by something completely different. Case B is more subtle. For correctness it requires the following sequence to happen: - take page table lock - clear page table entry and notify (pmd/pte_huge_clear_flush_notify()) - set page table entry to point to new page If clearing the page table entry is not followed by a notify before setting the new pte/pmd value then you can break memory model like C11 or C++11 for the device. Consider the following scenario (device use a feature similar to ATS/ PASID): Two address addrA and addrB such that |addrA - addrB| >= PAGE_SIZE we assume they are write protected for COW (other case of B apply too). [Time N] ----------------------------------------------------------------- CPU-thread-0 {try to write to addrA} CPU-thread-1 {try to write to addrB} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA and populate device TLB} DEV-thread-2 {read addrB and populate device TLB} [Time N+1] --------------------------------------------------------------- CPU-thread-0 {COW_step0: {mmu_notifier_invalidate_range_start(addrA)}} CPU-thread-1 {COW_step0: {mmu_notifier_invalidate_range_start(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+2] --------------------------------------------------------------- CPU-thread-0 {COW_step1: {update page table point to new page for addrA}} CPU-thread-1 {COW_step1: {update page table point to new page for addrB}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {write to addrA which is a write to new page} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+3] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {preempted} CPU-thread-2 {} CPU-thread-3 {write to addrB which is a write to new page} DEV-thread-0 {} DEV-thread-2 {} [Time N+4] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {COW_step3: {mmu_notifier_invalidate_range_end(addrB)}} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {} DEV-thread-2 {} [Time N+5] --------------------------------------------------------------- CPU-thread-0 {preempted} CPU-thread-1 {} CPU-thread-2 {} CPU-thread-3 {} DEV-thread-0 {read addrA from old page} DEV-thread-2 {read addrB from new page} So here because at time N+2 the clear page table entry was not pair with a notification to invalidate the secondary TLB, the device see the new value for addrB before seing the new value for addrA. This break total memory ordering for the device. When changing a pte to write protect or to point to a new write protected page with same content (KSM) it is ok to delay invalidate_range callback to mmu_notifier_invalidate_range_end() outside the page table lock. This is true even if the thread doing page table update is preempted right after releasing page table lock before calling mmu_notifier_invalidate_range_end Thanks to Andrea for thinking of a problematic scenario for COW. [jglisse@redhat.com: v2] Link: http://lkml.kernel.org/r/20171017031003.7481-2-jglisse@redhat.com Link: http://lkml.kernel.org/r/20170901173011.10745-1-jglisse@redhat.com Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alistair Popple <alistair@popple.id.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-16 01:34:07 +00:00
}
mm: support madvise(MADV_FREE) Linux doesn't have an ability to free pages lazy while other OS already have been supported that named by madvise(MADV_FREE). The gain is clear that kernel can discard freed pages rather than swapping out or OOM if memory pressure happens. Without memory pressure, freed pages would be reused by userspace without another additional overhead(ex, page fault + allocation + zeroing). Jason Evans said: : Facebook has been using MAP_UNINITIALIZED : (https://lkml.org/lkml/2012/1/18/308) in some of its applications for : several years, but there are operational costs to maintaining this : out-of-tree in our kernel and in jemalloc, and we are anxious to retire it : in favor of MADV_FREE. When we first enabled MAP_UNINITIALIZED it : increased throughput for much of our workload by ~5%, and although the : benefit has decreased using newer hardware and kernels, there is still : enough benefit that we cannot reasonably retire it without a replacement. : : Aside from Facebook operations, there are numerous broadly used : applications that would benefit from MADV_FREE. The ones that immediately : come to mind are redis, varnish, and MariaDB. I don't have much insight : into Android internals and development process, but I would hope to see : MADV_FREE support eventually end up there as well to benefit applications : linked with the integrated jemalloc. : : jemalloc will use MADV_FREE once it becomes available in the Linux kernel. : In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's : available: *BSD, OS X, Windows, and Solaris -- every platform except Linux : (and AIX, but I'm not sure it even compiles on AIX). The lack of : MADV_FREE on Linux forced me down a long series of increasingly : sophisticated heuristics for madvise() volume reduction, and even so this : remains a common performance issue for people using jemalloc on Linux. : Please integrate MADV_FREE; many people will benefit substantially. How it works: When madvise syscall is called, VM clears dirty bit of ptes of the range. If memory pressure happens, VM checks dirty bit of page table and if it found still "clean", it means it's a "lazyfree pages" so VM could discard the page instead of swapping out. Once there was store operation for the page before VM peek a page to reclaim, dirty bit is set so VM can swap out the page instead of discarding. One thing we should notice is that basically, MADV_FREE relies on dirty bit in page table entry to decide whether VM allows to discard the page or not. IOW, if page table entry includes marked dirty bit, VM shouldn't discard the page. However, as a example, if swap-in by read fault happens, page table entry doesn't have dirty bit so MADV_FREE could discard the page wrongly. For avoiding the problem, MADV_FREE did more checks with PageDirty and PageSwapCache. It worked out because swapped-in page lives on swap cache and since it is evicted from the swap cache, the page has PG_dirty flag. So both page flags check effectively prevent wrong discarding by MADV_FREE. However, a problem in above logic is that swapped-in page has PG_dirty still after they are removed from swap cache so VM cannot consider the page as freeable any more even if madvise_free is called in future. Look at below example for detail. ptr = malloc(); memset(ptr); .. .. .. heavy memory pressure so all of pages are swapped out .. .. var = *ptr; -> a page swapped-in and could be removed from swapcache. Then, page table doesn't mark dirty bit and page descriptor includes PG_dirty .. .. madvise_free(ptr); -> It doesn't clear PG_dirty of the page. .. .. .. .. heavy memory pressure again. .. In this time, VM cannot discard the page because the page .. has *PG_dirty* To solve the problem, this patch clears PG_dirty if only the page is owned exclusively by current process when madvise is called because PG_dirty represents ptes's dirtiness in several processes so we could clear it only if we own it exclusively. Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc and hope glibc supports it) and jemalloc/tcmalloc already have supported the feature for other OS(ex, FreeBSD) barrios@blaptop:~/benchmark/ebizzy$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 1 Core(s) per socket: 1 Socket(s): 12 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 2 Stepping: 3 CPU MHz: 3200.185 BogoMIPS: 6400.53 Virtualization: VT-x Hypervisor vendor: KVM Virtualization type: full L1d cache: 32K L1i cache: 32K L2 cache: 4096K NUMA node0 CPU(s): 0-11 ebizzy benchmark(./ebizzy -S 10 -n 512) Higher avg is better. vanilla-jemalloc MADV_free-jemalloc 1 thread records: 10 records: 10 avg: 2961.90 avg: 12069.70 std: 71.96(2.43%) std: 186.68(1.55%) max: 3070.00 max: 12385.00 min: 2796.00 min: 11746.00 2 thread records: 10 records: 10 avg: 5020.00 avg: 17827.00 std: 264.87(5.28%) std: 358.52(2.01%) max: 5244.00 max: 18760.00 min: 4251.00 min: 17382.00 4 thread records: 10 records: 10 avg: 8988.80 avg: 27930.80 std: 1175.33(13.08%) std: 3317.33(11.88%) max: 9508.00 max: 30879.00 min: 5477.00 min: 21024.00 8 thread records: 10 records: 10 avg: 13036.50 avg: 33739.40 std: 170.67(1.31%) std: 5146.22(15.25%) max: 13371.00 max: 40572.00 min: 12785.00 min: 24088.00 16 thread records: 10 records: 10 avg: 11092.40 avg: 31424.20 std: 710.60(6.41%) std: 3763.89(11.98%) max: 12446.00 max: 36635.00 min: 9949.00 min: 25669.00 32 thread records: 10 records: 10 avg: 11067.00 avg: 34495.80 std: 971.06(8.77%) std: 2721.36(7.89%) max: 12010.00 max: 38598.00 min: 9002.00 min: 30636.00 In summary, MADV_FREE is about much faster than MADV_DONTNEED. This patch (of 12): Add core MADV_FREE implementation. [akpm@linux-foundation.org: small cleanups] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jason Evans <je@fb.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: "Shaohua Li" <shli@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 00:54:53 +00:00
discard:
page_remove_rmap(subpage, vma, folio_test_hugetlb(folio));
if (vma->vm_flags & VM_LOCKED)
mlock_drain_local();
folio_put(folio);
}
mmu_notifier_invalidate_range_end(&range);
return ret;
}
static bool invalid_migration_vma(struct vm_area_struct *vma, void *arg)
{
return vma_is_temporary_stack(vma);
}
static int folio_not_mapped(struct folio *folio)
{
return !folio_mapped(folio);
}
/**
* try_to_unmap - Try to remove all page table mappings to a folio.
* @folio: The folio to unmap.
* @flags: action and flags
*
* Tries to remove all the page table entries which are mapping this
* folio. It is the caller's responsibility to check if the folio is
* still mapped if needed (use TTU_SYNC to prevent accounting races).
*
* Context: Caller must hold the folio lock.
*/
void try_to_unmap(struct folio *folio, enum ttu_flags flags)
{
struct rmap_walk_control rwc = {
.rmap_one = try_to_unmap_one,
.arg = (void *)flags,
.done = folio_not_mapped,
.anon_lock = folio_lock_anon_vma_read,
};
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
if (flags & TTU_RMAP_LOCKED)
rmap_walk_locked(folio, &rwc);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
else
rmap_walk(folio, &rwc);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
}
/*
* @arg: enum ttu_flags will be passed to this argument.
*
* If TTU_SPLIT_HUGE_PMD is specified any PMD mappings will be split into PTEs
* containing migration entries.
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
*/
static bool try_to_migrate_one(struct folio *folio, struct vm_area_struct *vma,
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
unsigned long address, void *arg)
{
struct mm_struct *mm = vma->vm_mm;
DEFINE_FOLIO_VMA_WALK(pvmw, folio, vma, address, 0);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
pte_t pteval;
struct page *subpage;
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
bool anon_exclusive, ret = true;
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
struct mmu_notifier_range range;
enum ttu_flags flags = (enum ttu_flags)(long)arg;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
unsigned long pfn;
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
unsigned long hsz = 0;
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/*
* When racing against e.g. zap_pte_range() on another cpu,
* in between its ptep_get_and_clear_full() and page_remove_rmap(),
* try_to_migrate() may return before page_mapped() has become false,
* if page table locking is skipped: use TTU_SYNC to wait for that.
*/
if (flags & TTU_SYNC)
pvmw.flags = PVMW_SYNC;
/*
* unmap_page() in mm/huge_memory.c is the only user of migration with
* TTU_SPLIT_HUGE_PMD and it wants to freeze.
*/
if (flags & TTU_SPLIT_HUGE_PMD)
split_huge_pmd_address(vma, address, true, folio);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/*
* For THP, we have to assume the worse case ie pmd for invalidation.
* For hugetlb, it could be much worse if we need to do pud
* invalidation in the case of pmd sharing.
*
* Note that the page can not be free in this function as call of
* try_to_unmap() must hold a reference on the page.
*/
range.end = vma_address_end(&pvmw);
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, vma->vm_mm,
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
address, range.end);
if (folio_test_hugetlb(folio)) {
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/*
* If sharing is possible, start and end will be adjusted
* accordingly.
*/
adjust_range_if_pmd_sharing_possible(vma, &range.start,
&range.end);
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
/* We need the huge page size for set_huge_pte_at() */
hsz = huge_page_size(hstate_vma(vma));
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
}
mmu_notifier_invalidate_range_start(&range);
while (page_vma_mapped_walk(&pvmw)) {
#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
/* PMD-mapped THP migration entry */
if (!pvmw.pte) {
subpage = folio_page(folio,
pmd_pfn(*pvmw.pmd) - folio_pfn(folio));
VM_BUG_ON_FOLIO(folio_test_hugetlb(folio) ||
!folio_test_pmd_mappable(folio), folio);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
mm/rmap: fail try_to_migrate() early when setting a PMD migration entry fails Let's fail right away in case we cannot clear PG_anon_exclusive because the anon THP may be pinned. Right now, we continue trying to install migration entries and the caller of try_to_migrate() will realize that the page is still mapped and has to restore the migration entries. Let's just fail fast just like for PTE migration entries. Link: https://lkml.kernel.org/r/20220428083441.37290-14-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (set_pmd_migration_entry(&pvmw, subpage)) {
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
continue;
}
#endif
/* Unexpected PMD-mapped THP? */
VM_BUG_ON_FOLIO(!pvmw.pte, folio);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pfn = pte_pfn(ptep_get(pvmw.pte));
mm/rmap: fix dereferencing invalid subpage pointer in try_to_migrate_one() The subpage we calculate is an invalid pointer for device private pages, because device private pages are mapped via non-present device private entries, not ordinary present PTEs. Let's just not compute broken pointers and fixup later. Move the proper assignment of the correct subpage to the beginning of the function and assert that we really only have a single page in our folio. This currently results in a BUG when tying to compute anon_exclusive, because: [ 528.727237] BUG: unable to handle page fault for address: ffffea1fffffffc0 [ 528.739585] #PF: supervisor read access in kernel mode [ 528.745324] #PF: error_code(0x0000) - not-present page [ 528.751062] PGD 44eaf2067 P4D 44eaf2067 PUD 0 [ 528.756026] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 528.760890] CPU: 120 PID: 18275 Comm: hmm-tests Not tainted 5.19.0-rc3-kfd-alex #257 [ 528.769542] Hardware name: AMD Corporation BardPeak/BardPeak, BIOS RTY1002BDS 09/17/2021 [ 528.778579] RIP: 0010:try_to_migrate_one+0x21a/0x1000 [ 528.784225] Code: f6 48 89 c8 48 2b 05 45 d1 6a 01 48 c1 f8 06 48 29 c3 48 8b 45 a8 48 c1 e3 06 48 01 cb f6 41 18 01 48 89 85 50 ff ff ff 74 0b <4c> 8b 33 49 c1 ee 11 41 83 e6 01 48 8b bd 48 ff ff ff e8 3f 99 02 [ 528.805194] RSP: 0000:ffffc90003cdfaa0 EFLAGS: 00010202 [ 528.811027] RAX: 00007ffff7ff4000 RBX: ffffea1fffffffc0 RCX: ffffeaffffffffc0 [ 528.818995] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc90003cdfaf8 [ 528.826962] RBP: ffffc90003cdfb70 R08: 0000000000000000 R09: 0000000000000000 [ 528.834930] R10: ffffc90003cdf910 R11: 0000000000000002 R12: ffff888194450540 [ 528.842899] R13: ffff888160d057c0 R14: 0000000000000000 R15: 03ffffffffffffff [ 528.850865] FS: 00007ffff7fdb740(0000) GS:ffff8883b0600000(0000) knlGS:0000000000000000 [ 528.859891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 528.866308] CR2: ffffea1fffffffc0 CR3: 00000001562b4003 CR4: 0000000000770ee0 [ 528.874275] PKRU: 55555554 [ 528.877286] Call Trace: [ 528.880016] <TASK> [ 528.882356] ? lock_is_held_type+0xdf/0x130 [ 528.887033] rmap_walk_anon+0x167/0x410 [ 528.891316] try_to_migrate+0x90/0xd0 [ 528.895405] ? try_to_unmap_one+0xe10/0xe10 [ 528.900074] ? anon_vma_ctor+0x50/0x50 [ 528.904260] ? put_anon_vma+0x10/0x10 [ 528.908347] ? invalid_mkclean_vma+0x20/0x20 [ 528.913114] migrate_vma_setup+0x5f4/0x750 [ 528.917691] dmirror_devmem_fault+0x8c/0x250 [test_hmm] [ 528.923532] do_swap_page+0xac0/0xe50 [ 528.927623] ? __lock_acquire+0x4b2/0x1ac0 [ 528.932199] __handle_mm_fault+0x949/0x1440 [ 528.936876] handle_mm_fault+0x13f/0x3e0 [ 528.941256] do_user_addr_fault+0x215/0x740 [ 528.945928] exc_page_fault+0x75/0x280 [ 528.950115] asm_exc_page_fault+0x27/0x30 [ 528.954593] RIP: 0033:0x40366b ... Link: https://lkml.kernel.org/r/20220623205332.319257-1-david@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alistair Popple <apopple@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-23 20:53:32 +00:00
if (folio_is_zone_device(folio)) {
/*
* Our PTE is a non-present device exclusive entry and
* calculating the subpage as for the common case would
* result in an invalid pointer.
*
* Since only PAGE_SIZE pages can currently be
* migrated, just set it to page. This will need to be
* changed when hugepage migrations to device private
* memory are supported.
*/
VM_BUG_ON_FOLIO(folio_nr_pages(folio) > 1, folio);
subpage = &folio->page;
} else {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
subpage = folio_page(folio, pfn - folio_pfn(folio));
mm/rmap: fix dereferencing invalid subpage pointer in try_to_migrate_one() The subpage we calculate is an invalid pointer for device private pages, because device private pages are mapped via non-present device private entries, not ordinary present PTEs. Let's just not compute broken pointers and fixup later. Move the proper assignment of the correct subpage to the beginning of the function and assert that we really only have a single page in our folio. This currently results in a BUG when tying to compute anon_exclusive, because: [ 528.727237] BUG: unable to handle page fault for address: ffffea1fffffffc0 [ 528.739585] #PF: supervisor read access in kernel mode [ 528.745324] #PF: error_code(0x0000) - not-present page [ 528.751062] PGD 44eaf2067 P4D 44eaf2067 PUD 0 [ 528.756026] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 528.760890] CPU: 120 PID: 18275 Comm: hmm-tests Not tainted 5.19.0-rc3-kfd-alex #257 [ 528.769542] Hardware name: AMD Corporation BardPeak/BardPeak, BIOS RTY1002BDS 09/17/2021 [ 528.778579] RIP: 0010:try_to_migrate_one+0x21a/0x1000 [ 528.784225] Code: f6 48 89 c8 48 2b 05 45 d1 6a 01 48 c1 f8 06 48 29 c3 48 8b 45 a8 48 c1 e3 06 48 01 cb f6 41 18 01 48 89 85 50 ff ff ff 74 0b <4c> 8b 33 49 c1 ee 11 41 83 e6 01 48 8b bd 48 ff ff ff e8 3f 99 02 [ 528.805194] RSP: 0000:ffffc90003cdfaa0 EFLAGS: 00010202 [ 528.811027] RAX: 00007ffff7ff4000 RBX: ffffea1fffffffc0 RCX: ffffeaffffffffc0 [ 528.818995] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc90003cdfaf8 [ 528.826962] RBP: ffffc90003cdfb70 R08: 0000000000000000 R09: 0000000000000000 [ 528.834930] R10: ffffc90003cdf910 R11: 0000000000000002 R12: ffff888194450540 [ 528.842899] R13: ffff888160d057c0 R14: 0000000000000000 R15: 03ffffffffffffff [ 528.850865] FS: 00007ffff7fdb740(0000) GS:ffff8883b0600000(0000) knlGS:0000000000000000 [ 528.859891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 528.866308] CR2: ffffea1fffffffc0 CR3: 00000001562b4003 CR4: 0000000000770ee0 [ 528.874275] PKRU: 55555554 [ 528.877286] Call Trace: [ 528.880016] <TASK> [ 528.882356] ? lock_is_held_type+0xdf/0x130 [ 528.887033] rmap_walk_anon+0x167/0x410 [ 528.891316] try_to_migrate+0x90/0xd0 [ 528.895405] ? try_to_unmap_one+0xe10/0xe10 [ 528.900074] ? anon_vma_ctor+0x50/0x50 [ 528.904260] ? put_anon_vma+0x10/0x10 [ 528.908347] ? invalid_mkclean_vma+0x20/0x20 [ 528.913114] migrate_vma_setup+0x5f4/0x750 [ 528.917691] dmirror_devmem_fault+0x8c/0x250 [test_hmm] [ 528.923532] do_swap_page+0xac0/0xe50 [ 528.927623] ? __lock_acquire+0x4b2/0x1ac0 [ 528.932199] __handle_mm_fault+0x949/0x1440 [ 528.936876] handle_mm_fault+0x13f/0x3e0 [ 528.941256] do_user_addr_fault+0x215/0x740 [ 528.945928] exc_page_fault+0x75/0x280 [ 528.950115] asm_exc_page_fault+0x27/0x30 [ 528.954593] RIP: 0033:0x40366b ... Link: https://lkml.kernel.org/r/20220623205332.319257-1-david@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alistair Popple <apopple@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-23 20:53:32 +00:00
}
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
address = pvmw.address;
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
anon_exclusive = folio_test_anon(folio) &&
PageAnonExclusive(subpage);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
if (folio_test_hugetlb(folio)) {
bool anon = folio_test_anon(folio);
/*
* huge_pmd_unshare may unmap an entire PMD page.
* There is no way of knowing exactly which PMDs may
* be cached for this mm, so we must flush them all.
* start/end were already adjusted above to cover this
* range.
*/
flush_cache_range(vma, range.start, range.end);
/*
* To call huge_pmd_unshare, i_mmap_rwsem must be
* held in write mode. Caller needs to explicitly
* do this outside rmap routines.
hugetlb: use new vma_lock for pmd sharing synchronization The new hugetlb vma lock is used to address this race: Faulting thread Unsharing thread ... ... ptep = huge_pte_offset() or ptep = huge_pte_alloc() ... i_mmap_lock_write lock page table ptep invalid <------------------------ huge_pmd_unshare() Could be in a previously unlock_page_table sharing process or worse i_mmap_unlock_write ... The vma_lock is used as follows: - During fault processing. The lock is acquired in read mode before doing a page table lock and allocation (huge_pte_alloc). The lock is held until code is finished with the page table entry (ptep). - The lock must be held in write mode whenever huge_pmd_unshare is called. Lock ordering issues come into play when unmapping a page from all vmas mapping the page. The i_mmap_rwsem must be held to search for the vmas, and the vma lock must be held before calling unmap which will call huge_pmd_unshare. This is done today in: - try_to_migrate_one and try_to_unmap_ for page migration and memory error handling. In these routines we 'try' to obtain the vma lock and fail to unmap if unsuccessful. Calling routines already deal with the failure of unmapping. - hugetlb_vmdelete_list for truncation and hole punch. This routine also tries to acquire the vma lock. If it fails, it skips the unmapping. However, we can not have file truncation or hole punch fail because of contention. After hugetlb_vmdelete_list, truncation and hole punch call remove_inode_hugepages. remove_inode_hugepages checks for mapped pages and call hugetlb_unmap_file_page to unmap them. hugetlb_unmap_file_page is designed to drop locks and reacquire in the correct order to guarantee unmap success. Link: https://lkml.kernel.org/r/20220914221810.95771-9-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:09 +00:00
*
* We also must hold hugetlb vma_lock in write mode.
* Lock order dictates acquiring vma_lock BEFORE
* i_mmap_rwsem. We can only try lock here and
* fail if unsuccessful.
*/
hugetlb: use new vma_lock for pmd sharing synchronization The new hugetlb vma lock is used to address this race: Faulting thread Unsharing thread ... ... ptep = huge_pte_offset() or ptep = huge_pte_alloc() ... i_mmap_lock_write lock page table ptep invalid <------------------------ huge_pmd_unshare() Could be in a previously unlock_page_table sharing process or worse i_mmap_unlock_write ... The vma_lock is used as follows: - During fault processing. The lock is acquired in read mode before doing a page table lock and allocation (huge_pte_alloc). The lock is held until code is finished with the page table entry (ptep). - The lock must be held in write mode whenever huge_pmd_unshare is called. Lock ordering issues come into play when unmapping a page from all vmas mapping the page. The i_mmap_rwsem must be held to search for the vmas, and the vma lock must be held before calling unmap which will call huge_pmd_unshare. This is done today in: - try_to_migrate_one and try_to_unmap_ for page migration and memory error handling. In these routines we 'try' to obtain the vma lock and fail to unmap if unsuccessful. Calling routines already deal with the failure of unmapping. - hugetlb_vmdelete_list for truncation and hole punch. This routine also tries to acquire the vma lock. If it fails, it skips the unmapping. However, we can not have file truncation or hole punch fail because of contention. After hugetlb_vmdelete_list, truncation and hole punch call remove_inode_hugepages. remove_inode_hugepages checks for mapped pages and call hugetlb_unmap_file_page to unmap them. hugetlb_unmap_file_page is designed to drop locks and reacquire in the correct order to guarantee unmap success. Link: https://lkml.kernel.org/r/20220914221810.95771-9-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Houghton <jthoughton@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Prakash Sangappa <prakash.sangappa@oracle.com> Cc: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-14 22:18:09 +00:00
if (!anon) {
VM_BUG_ON(!(flags & TTU_RMAP_LOCKED));
if (!hugetlb_vma_trylock_write(vma)) {
page_vma_mapped_walk_done(&pvmw);
ret = false;
break;
}
if (huge_pmd_unshare(mm, vma, address, pvmw.pte)) {
hugetlb_vma_unlock_write(vma);
flush_tlb_range(vma,
range.start, range.end);
/*
* The ref count of the PMD page was
* dropped which is part of the way map
* counting is done for shared PMDs.
* Return 'true' here. When there is
* no other sharing, huge_pmd_unshare
* returns false and we will unmap the
* actual page and drop map count
* to zero.
*/
page_vma_mapped_walk_done(&pvmw);
break;
}
hugetlb_vma_unlock_write(vma);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
}
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
/* Nuke the hugetlb page table entry */
pteval = huge_ptep_clear_flush(vma, address, pvmw.pte);
} else {
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
flush_cache_page(vma, address, pfn);
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
/* Nuke the page table entry. */
migrate_pages: batch flushing TLB The TLB flushing will cost quite some CPU cycles during the folio migration in some situations. For example, when migrate a folio of a process with multiple active threads that run on multiple CPUs. After batching the _unmap and _move in migrate_pages(), the TLB flushing can be batched easily with the existing TLB flush batching mechanism. This patch implements that. We use the following test case to test the patch. On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Haoxin helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. NOTE: TLB flushing is batched only for normal folios, not for THP folios. Because the overhead of TLB flushing for THP folios is much lower than that for normal folios (about 1/512 on x86 platform). Link: https://lkml.kernel.org/r/20230213123444.155149-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:43 +00:00
if (should_defer_flush(mm, flags)) {
/*
* We clear the PTE but do not flush so potentially
* a remote CPU could still be writing to the folio.
* If the entry was previously clean then the
* architecture must guarantee that a clear->dirty
* transition on a cached TLB entry is written through
* and traps if the PTE is unmapped.
*/
pteval = ptep_get_and_clear(mm, address, pvmw.pte);
mm/tlbbatch: rename and extend some functions This patch does some preparation works to extend batched TLB flush to arm64. Including: - Extend set_tlb_ubc_flush_pending() and arch_tlbbatch_add_mm() to accept an additional argument for address, architectures like arm64 may need this for tlbi. - Rename arch_tlbbatch_add_mm() to arch_tlbbatch_add_pending() to match its current function since we don't need to handle mm on architectures like arm64 and add_mm is not proper, add_pending will make sense to both as on x86 we're pending the TLB flush operations while on arm64 we're pending the synchronize operations. This intends no functional changes on x86. Link: https://lkml.kernel.org/r/20230717131004.12662-3-yangyicong@huawei.com Tested-by: Yicong Yang <yangyicong@hisilicon.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Tested-by: Punit Agrawal <punit.agrawal@bytedance.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Barry Song <baohua@kernel.org> Cc: Darren Hart <darren@os.amperecomputing.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: lipeifeng <lipeifeng@oppo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-07-17 13:10:02 +00:00
set_tlb_ubc_flush_pending(mm, pteval, address);
migrate_pages: batch flushing TLB The TLB flushing will cost quite some CPU cycles during the folio migration in some situations. For example, when migrate a folio of a process with multiple active threads that run on multiple CPUs. After batching the _unmap and _move in migrate_pages(), the TLB flushing can be batched easily with the existing TLB flush batching mechanism. This patch implements that. We use the following test case to test the patch. On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Haoxin helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. NOTE: TLB flushing is batched only for normal folios, not for THP folios. Because the overhead of TLB flushing for THP folios is much lower than that for normal folios (about 1/512 on x86 platform). Link: https://lkml.kernel.org/r/20230213123444.155149-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:43 +00:00
} else {
pteval = ptep_clear_flush(vma, address, pvmw.pte);
}
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
}
/* Set the dirty flag on the folio now the pte is gone. */
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
if (pte_dirty(pteval))
folio_mark_dirty(folio);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/* Update high watermark before we lower rss */
update_hiwater_rss(mm);
if (folio_is_device_private(folio)) {
unsigned long pfn = folio_pfn(folio);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
swp_entry_t entry;
pte_t swp_pte;
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (anon_exclusive)
BUG_ON(page_try_share_anon_rmap(subpage));
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/*
* Store the pfn of the page in a special migration
* pte. do_swap_page() will wait until the migration
* pte is removed and then restart fault handling.
*/
entry = pte_to_swp_entry(pteval);
if (is_writable_device_private_entry(entry))
entry = make_writable_migration_entry(pfn);
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
else if (anon_exclusive)
entry = make_readable_exclusive_migration_entry(pfn);
else
entry = make_readable_migration_entry(pfn);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
swp_pte = swp_entry_to_pte(entry);
/*
* pteval maps a zone device page and is therefore
* a swap pte.
*/
if (pte_swp_soft_dirty(pteval))
swp_pte = pte_swp_mksoft_dirty(swp_pte);
if (pte_swp_uffd_wp(pteval))
swp_pte = pte_swp_mkuffd_wp(swp_pte);
set_pte_at(mm, pvmw.address, pvmw.pte, swp_pte);
trace_set_migration_pte(pvmw.address, pte_val(swp_pte),
compound_order(&folio->page));
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/*
* No need to invalidate here it will synchronize on
* against the special swap migration pte.
*/
} else if (PageHWPoison(subpage)) {
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
pteval = swp_entry_to_pte(make_hwpoison_entry(subpage));
if (folio_test_hugetlb(folio)) {
hugetlb_count_sub(folio_nr_pages(folio), mm);
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
set_huge_pte_at(mm, address, pvmw.pte, pteval,
hsz);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
} else {
dec_mm_counter(mm, mm_counter(&folio->page));
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
set_pte_at(mm, address, pvmw.pte, pteval);
}
} else if (pte_unused(pteval) && !userfaultfd_armed(vma)) {
/*
* The guest indicated that the page content is of no
* interest anymore. Simply discard the pte, vmscan
* will take care of the rest.
* A future reference will then fault in a new zero
* page. When userfaultfd is active, we must not drop
* this page though, as its main user (postcopy
* migration) will not expect userfaults on already
* copied pages.
*/
dec_mm_counter(mm, mm_counter(&folio->page));
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
} else {
swp_entry_t entry;
pte_t swp_pte;
if (arch_unmap_one(mm, vma, address, pteval) < 0) {
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
if (folio_test_hugetlb(folio))
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
set_huge_pte_at(mm, address, pvmw.pte,
pteval, hsz);
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
else
set_pte_at(mm, address, pvmw.pte, pteval);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
VM_BUG_ON_PAGE(pte_write(pteval) && folio_test_anon(folio) &&
!anon_exclusive, subpage);
mm: fix PageAnonExclusive clearing racing with concurrent RCU GUP-fast commit 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") made sure that when PageAnonExclusive() has to be cleared during temporary unmapping of a page, that the PTE is cleared/invalidated and that the TLB is flushed. What we want to achieve in all cases is that we cannot end up with a pin on an anonymous page that may be shared, because such pins would be unreliable and could result in memory corruptions when the mapped page and the pin go out of sync due to a write fault. That TLB flush handling was inspired by an outdated comment in mm/ksm.c:write_protect_page(), which similarly required the TLB flush in the past to synchronize with GUP-fast. However, ever since general RCU GUP fast was introduced in commit 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer sufficient to handle concurrent GUP-fast in all cases -- it only handles traditional IPI-based GUP-fast correctly. Peter Xu (thankfully) questioned whether that TLB flush is really required. On architectures that send an IPI broadcast on TLB flush, it works as expected. To synchronize with RCU GUP-fast properly, we're conceptually fine, however, we have to enforce a certain memory order and are missing memory barriers. Let's document that, avoid the TLB flush where possible and use proper explicit memory barriers where required. We shouldn't really care about the additional memory barriers here, as we're not on extremely hot paths -- and we're getting rid of some TLB flushes. We use a smp_mb() pair for handling concurrent pinning and a smp_rmb()/smp_wmb() pair for handling the corner case of only temporary PTE changes but permanent PageAnonExclusive changes. One extreme example, whereby GUP-fast takes a R/O pin and KSM wants to convert an exclusive anonymous page to a KSM page, and that page is already mapped write-protected (-> no PTE change) would be: Thread 0 (KSM) Thread 1 (GUP-fast) (B1) Read the PTE # (B2) skipped without FOLL_WRITE (A1) Clear PTE smp_mb() (A2) Check pinned (B3) Pin the mapped page smp_mb() (A3) Clear PageAnonExclusive smp_wmb() (A4) Restore PTE (B4) Check if the PTE changed smp_rmb() (B5) Check PageAnonExclusive Thread 1 will properly detect that PageAnonExclusive was cleared and back off. Note that we don't need a memory barrier between checking if the page is pinned and clearing PageAnonExclusive, because stores are not speculated. The possible issues due to reordering are of theoretical nature so far and attempts to reproduce the race failed. Especially the "no PTE change" case isn't the common case, because we'd need an exclusive anonymous page that's mapped R/O and the PTE is clean in KSM code -- and using KSM with page pinning isn't extremely common. Further, the clear+TLB flush we used for now implies a memory barrier. So the problematic missing part should be the missing memory barrier after pinning but before checking if the PTE changed. Link: https://lkml.kernel.org/r/20220901083559.67446-1-david@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Nadav Amit <namit@vmware.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Christoph von Recklinghausen <crecklin@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-09-01 08:35:59 +00:00
/* See page_try_share_anon_rmap(): clear PTE first. */
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
if (anon_exclusive &&
page_try_share_anon_rmap(subpage)) {
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
if (folio_test_hugetlb(folio))
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
set_huge_pte_at(mm, address, pvmw.pte,
pteval, hsz);
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
else
set_pte_at(mm, address, pvmw.pte, pteval);
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/*
* Store the pfn of the page in a special migration
* pte. do_swap_page() will wait until the migration
* pte is removed and then restart fault handling.
*/
if (pte_write(pteval))
entry = make_writable_migration_entry(
page_to_pfn(subpage));
mm: remember exclusively mapped anonymous pages with PG_anon_exclusive Let's mark exclusively mapped anonymous pages with PG_anon_exclusive as exclusive, and use that information to make GUP pins reliable and stay consistent with the page mapped into the page table even if the page table entry gets write-protected. With that information at hand, we can extend our COW logic to always reuse anonymous pages that are exclusive. For anonymous pages that might be shared, the existing logic applies. As already documented, PG_anon_exclusive is usually only expressive in combination with a page table entry. Especially PTE vs. PMD-mapped anonymous pages require more thought, some examples: due to mremap() we can easily have a single compound page PTE-mapped into multiple page tables exclusively in a single process -- multiple page table locks apply. Further, due to MADV_WIPEONFORK we might not necessarily write-protect all PTEs, and only some subpages might be pinned. Long story short: once PTE-mapped, we have to track information about exclusivity per sub-page, but until then, we can just track it for the compound page in the head page and not having to update a whole bunch of subpages all of the time for a simple PMD mapping of a THP. For simplicity, this commit mostly talks about "anonymous pages", while it's for THP actually "the part of an anonymous folio referenced via a page table entry". To not spill PG_anon_exclusive code all over the mm code-base, we let the anon rmap code to handle all PG_anon_exclusive logic it can easily handle. If a writable, present page table entry points at an anonymous (sub)page, that (sub)page must be PG_anon_exclusive. If GUP wants to take a reliably pin (FOLL_PIN) on an anonymous page references via a present page table entry, it must only pin if PG_anon_exclusive is set for the mapped (sub)page. This commit doesn't adjust GUP, so this is only implicitly handled for FOLL_WRITE, follow-up commits will teach GUP to also respect it for FOLL_PIN without FOLL_WRITE, to make all GUP pins of anonymous pages fully reliable. Whenever an anonymous page is to be shared (fork(), KSM), or when temporarily unmapping an anonymous page (swap, migration), the relevant PG_anon_exclusive bit has to be cleared to mark the anonymous page possibly shared. Clearing will fail if there are GUP pins on the page: * For fork(), this means having to copy the page and not being able to share it. fork() protects against concurrent GUP using the PT lock and the src_mm->write_protect_seq. * For KSM, this means sharing will fail. For swap this means, unmapping will fail, For migration this means, migration will fail early. All three cases protect against concurrent GUP using the PT lock and a proper clear/invalidate+flush of the relevant page table entry. This fixes memory corruptions reported for FOLL_PIN | FOLL_WRITE, when a pinned page gets mapped R/O and the successive write fault ends up replacing the page instead of reusing it. It improves the situation for O_DIRECT/vmsplice/... that still use FOLL_GET instead of FOLL_PIN, if fork() is *not* involved, however swapout and fork() are still problematic. Properly using FOLL_PIN instead of FOLL_GET for these GUP users will fix the issue for them. I. Details about basic handling I.1. Fresh anonymous pages page_add_new_anon_rmap() and hugepage_add_new_anon_rmap() will mark the given page exclusive via __page_set_anon_rmap(exclusive=1). As that is the mechanism fresh anonymous pages come into life (besides migration code where we copy the page->mapping), all fresh anonymous pages will start out as exclusive. I.2. COW reuse handling of anonymous pages When a COW handler stumbles over a (sub)page that's marked exclusive, it simply reuses it. Otherwise, the handler tries harder under page lock to detect if the (sub)page is exclusive and can be reused. If exclusive, page_move_anon_rmap() will mark the given (sub)page exclusive. Note that hugetlb code does not yet check for PageAnonExclusive(), as it still uses the old COW logic that is prone to the COW security issue because hugetlb code cannot really tolerate unnecessary/wrong COW as huge pages are a scarce resource. I.3. Migration handling try_to_migrate() has to try marking an exclusive anonymous page shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. migrate_vma_collect_pmd() and __split_huge_pmd_locked() are handled similarly. Writable migration entries implicitly point at shared anonymous pages. For readable migration entries that information is stored via a new "readable-exclusive" migration entry, specific to anonymous pages. When restoring a migration entry in remove_migration_pte(), information about exlusivity is detected via the migration entry type, and RMAP_EXCLUSIVE is set accordingly for page_add_anon_rmap()/hugepage_add_anon_rmap() to restore that information. I.4. Swapout handling try_to_unmap() has to try marking the mapped page possibly shared via page_try_share_anon_rmap(). If it fails because there are GUP pins on the page, unmap fails. For now, information about exclusivity is lost. In the future, we might want to remember that information in the swap entry in some cases, however, it requires more thought, care, and a way to store that information in swap entries. I.5. Swapin handling do_swap_page() will never stumble over exclusive anonymous pages in the swap cache, as try_to_migrate() prohibits that. do_swap_page() always has to detect manually if an anonymous page is exclusive and has to set RMAP_EXCLUSIVE for page_add_anon_rmap() accordingly. I.6. THP handling __split_huge_pmd_locked() has to move the information about exclusivity from the PMD to the PTEs. a) In case we have a readable-exclusive PMD migration entry, simply insert readable-exclusive PTE migration entries. b) In case we have a present PMD entry and we don't want to freeze ("convert to migration entries"), simply forward PG_anon_exclusive to all sub-pages, no need to temporarily clear the bit. c) In case we have a present PMD entry and want to freeze, handle it similar to try_to_migrate(): try marking the page shared first. In case we fail, we ignore the "freeze" instruction and simply split ordinarily. try_to_migrate() will properly fail because the THP is still mapped via PTEs. When splitting a compound anonymous folio (THP), the information about exclusivity is implicitly handled via the migration entries: no need to replicate PG_anon_exclusive manually. I.7. fork() handling fork() handling is relatively easy, because PG_anon_exclusive is only expressive for some page table entry types. a) Present anonymous pages page_try_dup_anon_rmap() will mark the given subpage shared -- which will fail if the page is pinned. If it failed, we have to copy (or PTE-map a PMD to handle it on the PTE level). Note that device exclusive entries are just a pointer at a PageAnon() page. fork() will first convert a device exclusive entry to a present page table and handle it just like present anonymous pages. b) Device private entry Device private entries point at PageAnon() pages that cannot be mapped directly and, therefore, cannot get pinned. page_try_dup_anon_rmap() will mark the given subpage shared, which cannot fail because they cannot get pinned. c) HW poison entries PG_anon_exclusive will remain untouched and is stale -- the page table entry is just a placeholder after all. d) Migration entries Writable and readable-exclusive entries are converted to readable entries: possibly shared. I.8. mprotect() handling mprotect() only has to properly handle the new readable-exclusive migration entry: When write-protecting a migration entry that points at an anonymous page, remember the information about exclusivity via the "readable-exclusive" migration entry type. II. Migration and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a migration entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_migrate() places a migration entry after checking for GUP pins and marks the page possibly shared. 2. GUP-fast pins the page due to lack of synchronization 3. fork() converts the "writable/readable-exclusive" migration entry into a readable migration entry 4. Migration fails due to the GUP pin (failing to freeze the refcount) 5. Migration entries are restored. PG_anon_exclusive is lost -> We have a pinned page that is not marked exclusive anymore. Note that we move information about exclusivity from the page to the migration entry as it otherwise highly overcomplicates fork() and PTE-mapping a THP. III. Swapout and GUP-fast Whenever replacing a present page table entry that maps an exclusive anonymous page by a swap entry, we have to mark the page possibly shared and synchronize against GUP-fast by a proper clear/invalidate+flush to make the following scenario impossible: 1. try_to_unmap() places a swap entry after checking for GUP pins and clears exclusivity information on the page. 2. GUP-fast pins the page due to lack of synchronization. -> We have a pinned page that is not marked exclusive anymore. If we'd ever store information about exclusivity in the swap entry, similar to migration handling, the same considerations as in II would apply. This is future work. Link: https://lkml.kernel.org/r/20220428083441.37290-13-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Rientjes <rientjes@google.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Khalid Aziz <khalid.aziz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Liang Zhang <zhangliang5@huawei.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Nadav Amit <namit@vmware.com> Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-10 01:20:44 +00:00
else if (anon_exclusive)
entry = make_readable_exclusive_migration_entry(
page_to_pfn(subpage));
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
else
entry = make_readable_migration_entry(
page_to_pfn(subpage));
mm: remember young/dirty bit for page migrations When page migration happens, we always ignore the young/dirty bit settings in the old pgtable, and marking the page as old in the new page table using either pte_mkold() or pmd_mkold(), and keeping the pte clean. That's fine from functional-wise, but that's not friendly to page reclaim because the moving page can be actively accessed within the procedure. Not to mention hardware setting the young bit can bring quite some overhead on some systems, e.g. x86_64 needs a few hundreds nanoseconds to set the bit. The same slowdown problem to dirty bits when the memory is first written after page migration happened. Actually we can easily remember the A/D bit configuration and recover the information after the page is migrated. To achieve it, define a new set of bits in the migration swap offset field to cache the A/D bits for old pte. Then when removing/recovering the migration entry, we can recover the A/D bits even if the page changed. One thing to mention is that here we used max_swapfile_size() to detect how many swp offset bits we have, and we'll only enable this feature if we know the swp offset is big enough to store both the PFN value and the A/D bits. Otherwise the A/D bits are dropped like before. Link: https://lkml.kernel.org/r/20220811161331.37055-6-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Andi Kleen <andi.kleen@intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-11 16:13:29 +00:00
if (pte_young(pteval))
entry = make_migration_entry_young(entry);
if (pte_dirty(pteval))
entry = make_migration_entry_dirty(entry);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
swp_pte = swp_entry_to_pte(entry);
if (pte_soft_dirty(pteval))
swp_pte = pte_swp_mksoft_dirty(swp_pte);
if (pte_uffd_wp(pteval))
swp_pte = pte_swp_mkuffd_wp(swp_pte);
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
if (folio_test_hugetlb(folio))
mm: hugetlb: add huge page size param to set_huge_pte_at() Patch series "Fix set_huge_pte_at() panic on arm64", v2. This series fixes a bug in arm64's implementation of set_huge_pte_at(), which can result in an unprivileged user causing a kernel panic. The problem was triggered when running the new uffd poison mm selftest for HUGETLB memory. This test (and the uffd poison feature) was merged for v6.5-rc7. Ideally, I'd like to get this fix in for v6.6 and I've cc'ed stable (correctly this time) to get it backported to v6.5, where the issue first showed up. Description of Bug ================== arm64's huge pte implementation supports multiple huge page sizes, some of which are implemented in the page table with multiple contiguous entries. So set_huge_pte_at() needs to work out how big the logical pte is, so that it can also work out how many physical ptes (or pmds) need to be written. It previously did this by grabbing the folio out of the pte and querying its size. However, there are cases when the pte being set is actually a swap entry. But this also used to work fine, because for huge ptes, we only ever saw migration entries and hwpoison entries. And both of these types of swap entries have a PFN embedded, so the code would grab that and everything still worked out. But over time, more calls to set_huge_pte_at() have been added that set swap entry types that do not embed a PFN. And this causes the code to go bang. The triggering case is for the uffd poison test, commit 99aa77215ad0 ("selftests/mm: add uffd unit test for UFFDIO_POISON"), which causes a PTE_MARKER_POISONED swap entry to be set, coutesey of commit 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") - added in v6.5-rc7. Although review shows that there are other call sites that set PTE_MARKER_UFFD_WP (which also has no PFN), these don't trigger on arm64 because arm64 doesn't support UFFD WP. If CONFIG_DEBUG_VM is enabled, we do at least get a BUG(), but otherwise, it will dereference a bad pointer in page_folio(): static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry) { VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry)); return page_folio(pfn_to_page(swp_offset_pfn(entry))); } Fix === The simplest fix would have been to revert the dodgy cleanup commit 18f3962953e4 ("mm: hugetlb: kill set_huge_swap_pte_at()"), but since things have moved on, this would have required an audit of all the new set_huge_pte_at() call sites to see if they should be converted to set_huge_swap_pte_at(). As per the original intent of the change, it would also leave us open to future bugs when people invariably get it wrong and call the wrong helper. So instead, I've added a huge page size parameter to set_huge_pte_at(). This means that the arm64 code has the size in all cases. It's a bigger change, due to needing to touch the arches that implement the function, but it is entirely mechanical, so in my view, low risk. I've compile-tested all touched arches; arm64, parisc, powerpc, riscv, s390, sparc (and additionally x86_64). I've additionally booted and run mm selftests against arm64, where I observe the uffd poison test is fixed, and there are no other regressions. This patch (of 2): In order to fix a bug, arm64 needs to be told the size of the huge page for which the pte is being set in set_huge_pte_at(). Provide for this by adding an `unsigned long sz` parameter to the function. This follows the same pattern as huge_pte_clear(). This commit makes the required interface modifications to the core mm as well as all arches that implement this function (arm64, parisc, powerpc, riscv, s390, sparc). The actual arm64 bug will be fixed in a separate commit. No behavioral changes intended. Link: https://lkml.kernel.org/r/20230922115804.2043771-1-ryan.roberts@arm.com Link: https://lkml.kernel.org/r/20230922115804.2043771-2-ryan.roberts@arm.com Fixes: 8a13897fb0da ("mm: userfaultfd: support UFFDIO_POISON for hugetlbfs") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx] Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com> [vmalloc change] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Xu <peterx@redhat.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: SeongJae Park <sj@kernel.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> [6.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-22 11:58:03 +00:00
set_huge_pte_at(mm, address, pvmw.pte, swp_pte,
hsz);
mm: rmap: fix CONT-PTE/PMD size hugetlb issue when migration On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb: 2M and 1G, but also CONT-PTE/PMD size: 64K and 32M if a 4K page size specified. When migrating a hugetlb page, we will get the relevant page table entry by huge_pte_offset() only once to nuke it and remap it with a migration pte entry. This is correct for PMD or PUD size hugetlb, since they always contain only one pmd entry or pud entry in the page table. However this is incorrect for CONT-PTE and CONT-PMD size hugetlb, since they can contain several continuous pte or pmd entry with same page table attributes. So we will nuke or remap only one pte or pmd entry for this CONT-PTE/PMD size hugetlb page, which is not expected for hugetlb migration. The problem is we can still continue to modify the subpages' data of a hugetlb page during migrating a hugetlb page, which can cause a serious data consistent issue, since we did not nuke the page table entry and set a migration pte for the subpages of a hugetlb page. To fix this issue, we should change to use huge_ptep_clear_flush() to nuke a hugetlb page table, and remap it with set_huge_pte_at() and set_huge_swap_pte_at() when migrating a hugetlb page, which already considered the CONT-PTE or CONT-PMD size hugetlb. [akpm@linux-foundation.org: fix nommu build] [baolin.wang@linux.alibaba.com: fix build errors for !CONFIG_MMU] Link: https://lkml.kernel.org/r/a4baca670aca637e7198d9ae4543b8873cb224dc.1652270205.git.baolin.wang@linux.alibaba.com Link: https://lkml.kernel.org/r/ea5abf529f0997b5430961012bfda6166c1efc8c.1652147571.git.baolin.wang@linux.alibaba.com Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-13 23:48:55 +00:00
else
set_pte_at(mm, address, pvmw.pte, swp_pte);
trace_set_migration_pte(address, pte_val(swp_pte),
compound_order(&folio->page));
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
/*
* No need to invalidate here it will synchronize on
* against the special swap migration pte.
*/
}
page_remove_rmap(subpage, vma, folio_test_hugetlb(folio));
if (vma->vm_flags & VM_LOCKED)
mlock_drain_local();
folio_put(folio);
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
}
mmu_notifier_invalidate_range_end(&range);
return ret;
}
/**
* try_to_migrate - try to replace all page table mappings with swap entries
* @folio: the folio to replace page table entries for
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
* @flags: action and flags
*
* Tries to remove all the page table entries which are mapping this folio and
* replace them with special swap entries. Caller must hold the folio lock.
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
*/
void try_to_migrate(struct folio *folio, enum ttu_flags flags)
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
{
struct rmap_walk_control rwc = {
.rmap_one = try_to_migrate_one,
.arg = (void *)flags,
.done = folio_not_mapped,
.anon_lock = folio_lock_anon_vma_read,
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
};
/*
* Migration always ignores mlock and only supports TTU_RMAP_LOCKED and
migrate_pages: batch flushing TLB The TLB flushing will cost quite some CPU cycles during the folio migration in some situations. For example, when migrate a folio of a process with multiple active threads that run on multiple CPUs. After batching the _unmap and _move in migrate_pages(), the TLB flushing can be batched easily with the existing TLB flush batching mechanism. This patch implements that. We use the following test case to test the patch. On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Haoxin helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. NOTE: TLB flushing is batched only for normal folios, not for THP folios. Because the overhead of TLB flushing for THP folios is much lower than that for normal folios (about 1/512 on x86 platform). Link: https://lkml.kernel.org/r/20230213123444.155149-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:43 +00:00
* TTU_SPLIT_HUGE_PMD, TTU_SYNC, and TTU_BATCH_FLUSH flags.
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
*/
if (WARN_ON_ONCE(flags & ~(TTU_RMAP_LOCKED | TTU_SPLIT_HUGE_PMD |
migrate_pages: batch flushing TLB The TLB flushing will cost quite some CPU cycles during the folio migration in some situations. For example, when migrate a folio of a process with multiple active threads that run on multiple CPUs. After batching the _unmap and _move in migrate_pages(), the TLB flushing can be batched easily with the existing TLB flush batching mechanism. This patch implements that. We use the following test case to test the patch. On a 2-socket Intel server, - Run pmbench memory accessing benchmark - Run `migratepages` to migrate pages of pmbench between node 0 and node 1 back and forth. With the patch, the TLB flushing IPI reduces 99.1% during the test and the number of pages migrated successfully per second increases 291.7%. Haoxin helped to test the patchset on an ARM64 server with 128 cores, 2 NUMA nodes. Test results show that the page migration performance increases up to 78%. NOTE: TLB flushing is batched only for normal folios, not for THP folios. Because the overhead of TLB flushing for THP folios is much lower than that for normal folios (about 1/512 on x86 platform). Link: https://lkml.kernel.org/r/20230213123444.155149-9-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Xin Hao <xhao@linux.alibaba.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Bharata B Rao <bharata@amd.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-13 12:34:43 +00:00
TTU_SYNC | TTU_BATCH_FLUSH)))
mm/rmap: split migration into its own function Migration is currently implemented as a mode of operation for try_to_unmap_one() generally specified by passing the TTU_MIGRATION flag or in the case of splitting a huge anonymous page TTU_SPLIT_FREEZE. However it does not have much in common with the rest of the unmap functionality of try_to_unmap_one() and thus splitting it into a separate function reduces the complexity of try_to_unmap_one() making it more readable. Several simplifications can also be made in try_to_migrate_one() based on the following observations: - All users of TTU_MIGRATION also set TTU_IGNORE_MLOCK. - No users of TTU_MIGRATION ever set TTU_IGNORE_HWPOISON. - No users of TTU_MIGRATION ever set TTU_BATCH_FLUSH. TTU_SPLIT_FREEZE is a special case of migration used when splitting an anonymous page. This is most easily dealt with by calling the correct function from unmap_page() in mm/huge_memory.c - either try_to_migrate() for PageAnon or try_to_unmap(). Link: https://lkml.kernel.org/r/20210616105937.23201-5-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:16 +00:00
return;
if (folio_is_zone_device(folio) &&
(!folio_is_device_private(folio) && !folio_is_device_coherent(folio)))
return;
/*
* During exec, a temporary VMA is setup and later moved.
* The VMA is moved under the anon_vma lock but not the
* page tables leading to a race where migration cannot
* find the migration ptes. Rather than increasing the
* locking requirements of exec(), migration skips
* temporary VMAs until after exec() completes.
*/
if (!folio_test_ksm(folio) && folio_test_anon(folio))
rwc.invalid_vma = invalid_migration_vma;
if (flags & TTU_RMAP_LOCKED)
rmap_walk_locked(folio, &rwc);
else
rmap_walk(folio, &rwc);
mlock: mlocked pages are unevictable Make sure that mlocked pages also live on the unevictable LRU, so kswapd will not scan them over and over again. This is achieved through various strategies: 1) add yet another page flag--PG_mlocked--to indicate that the page is locked for efficient testing in vmscan and, optionally, fault path. This allows early culling of unevictable pages, preventing them from getting to page_referenced()/try_to_unmap(). Also allows separate accounting of mlock'd pages, as Nick's original patch did. Note: Nick's original mlock patch used a PG_mlocked flag. I had removed this in favor of the PG_unevictable flag + an mlock_count [new page struct member]. I restored the PG_mlocked flag to eliminate the new count field. 2) add the mlock/unevictable infrastructure to mm/mlock.c, with internal APIs in mm/internal.h. This is a rework of Nick's original patch to these files, taking into account that mlocked pages are now kept on unevictable LRU list. 3) update vmscan.c:page_evictable() to check PageMlocked() and, if vma passed in, the vm_flags. Note that the vma will only be passed in for new pages in the fault path; and then only if the "cull unevictable pages in fault path" patch is included. 4) add try_to_unlock() to rmap.c to walk a page's rmap and ClearPageMlocked() if no other vmas have it mlocked. Reuses as much of try_to_unmap() as possible. This effectively replaces the use of one of the lru list links as an mlock count. If this mechanism let's pages in mlocked vmas leak through w/o PG_mlocked set [I don't know that it does], we should catch them later in try_to_unmap(). One hopes this will be rare, as it will be relatively expensive. Original mm/internal.h, mm/rmap.c and mm/mlock.c changes: Signed-off-by: Nick Piggin <npiggin@suse.de> splitlru: introduce __get_user_pages(): New munlock processing need to GUP_FLAGS_IGNORE_VMA_PERMISSIONS. because current get_user_pages() can't grab PROT_NONE pages theresore it cause PROT_NONE pages can't munlock. [akpm@linux-foundation.org: fix this for pagemap-pass-mm-into-pagewalkers.patch] [akpm@linux-foundation.org: untangle patch interdependencies] [akpm@linux-foundation.org: fix things after out-of-order merging] [hugh@veritas.com: fix page-flags mess] [lee.schermerhorn@hp.com: fix munlock page table walk - now requires 'mm'] [kosaki.motohiro@jp.fujitsu.com: build fix] [kosaki.motohiro@jp.fujitsu.com: fix truncate race and sevaral comments] [kosaki.motohiro@jp.fujitsu.com: splitlru: introduce __get_user_pages()] Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-19 03:26:44 +00:00
}
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
#ifdef CONFIG_DEVICE_PRIVATE
struct make_exclusive_args {
struct mm_struct *mm;
unsigned long address;
void *owner;
bool valid;
};
static bool page_make_device_exclusive_one(struct folio *folio,
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
struct vm_area_struct *vma, unsigned long address, void *priv)
{
struct mm_struct *mm = vma->vm_mm;
DEFINE_FOLIO_VMA_WALK(pvmw, folio, vma, address, 0);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
struct make_exclusive_args *args = priv;
pte_t pteval;
struct page *subpage;
bool ret = true;
struct mmu_notifier_range range;
swp_entry_t entry;
pte_t swp_pte;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_t ptent;
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
mmu_notifier_range_init_owner(&range, MMU_NOTIFY_EXCLUSIVE, 0,
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
vma->vm_mm, address, min(vma->vm_end,
address + folio_size(folio)),
args->owner);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
mmu_notifier_invalidate_range_start(&range);
while (page_vma_mapped_walk(&pvmw)) {
/* Unexpected PMD-mapped THP? */
VM_BUG_ON_FOLIO(!pvmw.pte, folio);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
ptent = ptep_get(pvmw.pte);
if (!pte_present(ptent)) {
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
ret = false;
page_vma_mapped_walk_done(&pvmw);
break;
}
subpage = folio_page(folio,
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
pte_pfn(ptent) - folio_pfn(folio));
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
address = pvmw.address;
/* Nuke the page table entry. */
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 15:15:45 +00:00
flush_cache_page(vma, address, pte_pfn(ptent));
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
pteval = ptep_clear_flush(vma, address, pvmw.pte);
/* Set the dirty flag on the folio now the pte is gone. */
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
if (pte_dirty(pteval))
folio_mark_dirty(folio);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
/*
* Check that our target page is still mapped at the expected
* address.
*/
if (args->mm == mm && args->address == address &&
pte_write(pteval))
args->valid = true;
/*
* Store the pfn of the page in a special migration
* pte. do_swap_page() will wait until the migration
* pte is removed and then restart fault handling.
*/
if (pte_write(pteval))
entry = make_writable_device_exclusive_entry(
page_to_pfn(subpage));
else
entry = make_readable_device_exclusive_entry(
page_to_pfn(subpage));
swp_pte = swp_entry_to_pte(entry);
if (pte_soft_dirty(pteval))
swp_pte = pte_swp_mksoft_dirty(swp_pte);
if (pte_uffd_wp(pteval))
swp_pte = pte_swp_mkuffd_wp(swp_pte);
set_pte_at(mm, address, pvmw.pte, swp_pte);
/*
* There is a reference on the page for the swap entry which has
* been removed, so shouldn't take another.
*/
mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Add vma argument to mlock_vma_page() and munlock_vma_page(), make them inline functions which check (vma->vm_flags & VM_LOCKED) before calling mlock_page() and munlock_page() in mm/mlock.c. Add bool compound to mlock_vma_page() and munlock_vma_page(): this is because we have understandable difficulty in accounting pte maps of THPs, and if passed a PageHead page, mlock_page() and munlock_page() cannot tell whether it's a pmd map to be counted or a pte map to be ignored. Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the others, and use that to call mlock_vma_page() at the end of the page adds, and munlock_vma_page() at the end of page_remove_rmap() (end or beginning? unimportant, but end was easier for assertions in testing). No page lock is required (although almost all adds happen to hold it): delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s. Certainly page lock did serialize with page migration, but I'm having difficulty explaining why that was ever important. Mlock accounting on THPs has been hard to define, differed between anon and file, involved PageDoubleMap in some places and not others, required clear_page_mlock() at some points. Keep it simple now: just count the pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks. page_add_new_anon_rmap() callers unchanged: they have long been calling lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED handling (it also checks for not VM_SPECIAL: I think that's overcautious, and inconsistent with other checks, that mmap_region() already prevents VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it). Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2022-02-15 02:26:39 +00:00
page_remove_rmap(subpage, vma, false);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
}
mmu_notifier_invalidate_range_end(&range);
return ret;
}
/**
* folio_make_device_exclusive - Mark the folio exclusively owned by a device.
* @folio: The folio to replace page table entries for.
* @mm: The mm_struct where the folio is expected to be mapped.
* @address: Address where the folio is expected to be mapped.
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
* @owner: passed to MMU_NOTIFY_EXCLUSIVE range notifier callbacks
*
* Tries to remove all the page table entries which are mapping this
* folio and replace them with special device exclusive swap entries to
* grant a device exclusive access to the folio.
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
*
* Context: Caller must hold the folio lock.
* Return: false if the page is still mapped, or if it could not be unmapped
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
* from the expected address. Otherwise returns true (success).
*/
static bool folio_make_device_exclusive(struct folio *folio,
struct mm_struct *mm, unsigned long address, void *owner)
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
{
struct make_exclusive_args args = {
.mm = mm,
.address = address,
.owner = owner,
.valid = false,
};
struct rmap_walk_control rwc = {
.rmap_one = page_make_device_exclusive_one,
.done = folio_not_mapped,
.anon_lock = folio_lock_anon_vma_read,
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
.arg = &args,
};
/*
* Restrict to anonymous folios for now to avoid potential writeback
* issues.
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
*/
if (!folio_test_anon(folio))
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
return false;
rmap_walk(folio, &rwc);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
return args.valid && !folio_mapcount(folio);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
}
/**
* make_device_exclusive_range() - Mark a range for exclusive use by a device
* @mm: mm_struct of associated target process
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
* @start: start of the region to mark for exclusive device access
* @end: end address of region
* @pages: returns the pages which were successfully marked for exclusive access
* @owner: passed to MMU_NOTIFY_EXCLUSIVE range notifier to allow filtering
*
* Returns: number of pages found in the range by GUP. A page is marked for
* exclusive access only if the page pointer is non-NULL.
*
* This function finds ptes mapping page(s) to the given address range, locks
* them and replaces mappings with special swap entries preventing userspace CPU
* access. On fault these entries are replaced with the original mapping after
* calling MMU notifiers.
*
* A driver using this to program access from a device must use a mmu notifier
* critical section to hold a device specific lock during programming. Once
* programming is complete it should drop the page lock and reference after
* which point CPU access to the page will revoke the exclusive access.
*/
int make_device_exclusive_range(struct mm_struct *mm, unsigned long start,
unsigned long end, struct page **pages,
void *owner)
{
long npages = (end - start) >> PAGE_SHIFT;
long i;
npages = get_user_pages_remote(mm, start, npages,
FOLL_GET | FOLL_WRITE | FOLL_SPLIT_PMD,
mm/gup: remove vmas parameter from get_user_pages_remote() The only instances of get_user_pages_remote() invocations which used the vmas parameter were for a single page which can instead simply look up the VMA directly. In particular:- - __update_ref_ctr() looked up the VMA but did nothing with it so we simply remove it. - __access_remote_vm() was already using vma_lookup() when the original lookup failed so by doing the lookup directly this also de-duplicates the code. We are able to perform these VMA operations as we already hold the mmap_lock in order to be able to call get_user_pages_remote(). As part of this work we add get_user_page_vma_remote() which abstracts the VMA lookup, error handling and decrementing the page reference count should the VMA lookup fail. This forms part of a broader set of patches intended to eliminate the vmas parameter altogether. [akpm@linux-foundation.org: avoid passing NULL to PTR_ERR] Link: https://lkml.kernel.org/r/d20128c849ecdbf4dd01cc828fcec32127ed939a.1684350871.git.lstoakes@gmail.com Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> (for arm64) Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> (for s390) Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Christian König <christian.koenig@amd.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-05-17 19:25:39 +00:00
pages, NULL);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
if (npages < 0)
return npages;
for (i = 0; i < npages; i++, start += PAGE_SIZE) {
struct folio *folio = page_folio(pages[i]);
if (PageTail(pages[i]) || !folio_trylock(folio)) {
folio_put(folio);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
pages[i] = NULL;
continue;
}
if (!folio_make_device_exclusive(folio, mm, start, owner)) {
folio_unlock(folio);
folio_put(folio);
mm: device exclusive memory access Some devices require exclusive write access to shared virtual memory (SVM) ranges to perform atomic operations on that memory. This requires CPU page tables to be updated to deny access whilst atomic operations are occurring. In order to do this introduce a new swap entry type (SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive access by a device all page table mappings for the particular range are replaced with device exclusive swap entries. This causes any CPU access to the page to result in a fault. Faults are resovled by replacing the faulting entry with the original mapping. This results in MMU notifiers being called which a driver uses to update access permissions such as revoking atomic access. After notifiers have been called the device will no longer have exclusive access to the region. Walking of the page tables to find the target pages is handled by get_user_pages() rather than a direct page table walk. A direct page table walk similar to what migrate_vma_collect()/unmap() does could also have been utilised. However this resulted in more code similar in functionality to what get_user_pages() provides as page faulting is required to make the PTEs present and to break COW. [dan.carpenter@oracle.com: fix signedness bug in make_device_exclusive_range()] Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda Link: https://lkml.kernel.org/r/20210616105937.23201-8-apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 01:54:25 +00:00
pages[i] = NULL;
}
}
return npages;
}
EXPORT_SYMBOL_GPL(make_device_exclusive_range);
#endif
void __put_anon_vma(struct anon_vma *anon_vma)
{
struct anon_vma *root = anon_vma->root;
anon_vma_free(anon_vma);
if (root != anon_vma && atomic_dec_and_test(&root->refcount))
anon_vma_free(root);
}
static struct anon_vma *rmap_walk_anon_lock(struct folio *folio,
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
struct rmap_walk_control *rwc)
{
struct anon_vma *anon_vma;
if (rwc->anon_lock)
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
return rwc->anon_lock(folio, rwc);
/*
* Note: remove_migration_ptes() cannot use folio_lock_anon_vma_read()
* because that depends on page_mapped(); but not all its usages
* are holding mmap_lock. Users without mmap_lock are required to
* take a reference count to prevent the anon_vma disappearing
*/
anon_vma = folio_anon_vma(folio);
if (!anon_vma)
return NULL;
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
if (anon_vma_trylock_read(anon_vma))
goto out;
if (rwc->try_lock) {
anon_vma = NULL;
rwc->contended = true;
goto out;
}
anon_vma_lock_read(anon_vma);
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
out:
return anon_vma;
}
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
/*
* rmap_walk_anon - do something to anonymous page using the object-based
* rmap method
* @folio: the folio to be handled
* @rwc: control variable according to each walk type
* @locked: caller holds relevant rmap lock
*
* Find all the mappings of a folio using the mapping pointer and the vma
* chains contained in the anon_vma struct it points to.
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
*/
static void rmap_walk_anon(struct folio *folio,
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
struct rmap_walk_control *rwc, bool locked)
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
{
struct anon_vma *anon_vma;
pgoff_t pgoff_start, pgoff_end;
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
struct anon_vma_chain *avc;
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
if (locked) {
anon_vma = folio_anon_vma(folio);
/* anon_vma disappear under us? */
VM_BUG_ON_FOLIO(!anon_vma, folio);
} else {
anon_vma = rmap_walk_anon_lock(folio, rwc);
}
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
if (!anon_vma)
return;
pgoff_start = folio_pgoff(folio);
pgoff_end = pgoff_start + folio_nr_pages(folio) - 1;
anon_vma_interval_tree_foreach(avc, &anon_vma->rb_root,
pgoff_start, pgoff_end) {
mm: change anon_vma linking to fix multi-process server scalability issue The old anon_vma code can lead to scalability issues with heavily forking workloads. Specifically, each anon_vma will be shared between the parent process and all its child processes. In a workload with 1000 child processes and a VMA with 1000 anonymous pages per process that get COWed, this leads to a system with a million anonymous pages in the same anon_vma, each of which is mapped in just one of the 1000 processes. However, the current rmap code needs to walk them all, leading to O(N) scanning complexity for each page. This can result in systems where one CPU is walking the page tables of 1000 processes in page_referenced_one, while all other CPUs are stuck on the anon_vma lock. This leads to catastrophic failure for a benchmark like AIM7, where the total number of processes can reach in the tens of thousands. Real workloads are still a factor 10 less process intensive than AIM7, but they are catching up. This patch changes the way anon_vmas and VMAs are linked, which allows us to associate multiple anon_vmas with a VMA. At fork time, each child process gets its own anon_vmas, in which its COWed pages will be instantiated. The parents' anon_vma is also linked to the VMA, because non-COWed pages could be present in any of the children. This reduces rmap scanning complexity to O(1) for the pages of the 1000 child processes, with O(N) complexity for at most 1/N pages in the system. This reduces the average scanning cost in heavily forking workloads from O(N) to 2. The only real complexity in this patch stems from the fact that linking a VMA to anon_vmas now involves memory allocations. This means vma_adjust can fail, if it needs to attach a VMA to anon_vma structures. This in turn means error handling needs to be added to the calling functions. A second source of complexity is that, because there can be multiple anon_vmas, the anon_vma linking in vma_adjust can no longer be done under "the" anon_vma lock. To prevent the rmap code from walking up an incomplete VMA, this patch introduces the VM_LOCK_RMAP VMA flag. This bit flag uses the same slot as the NOMMU VM_MAPPED_COPY, with an ifdef in mm.h to make sure it is impossible to compile a kernel that needs both symbolic values for the same bitflag. Some test results: Without the anon_vma changes, when AIM7 hits around 9.7k users (on a test box with 16GB RAM and not quite enough IO), the system ends up running >99% in system time, with every CPU on the same anon_vma lock in the pageout code. With these changes, AIM7 hits the cross-over point around 29.7k users. This happens with ~99% IO wait time, there never seems to be any spike in system time. The anon_vma lock contention appears to be resolved. [akpm@linux-foundation.org: cleanups] Signed-off-by: Rik van Riel <riel@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-05 21:42:07 +00:00
struct vm_area_struct *vma = avc->vma;
unsigned long address = vma_address(&folio->page, vma);
mm/thp: fix vma_address() if virtual address below file offset Running certain tests with a DEBUG_VM kernel would crash within hours, on the total_mapcount BUG() in split_huge_page_to_list(), while trying to free up some memory by punching a hole in a shmem huge page: split's try_to_unmap() was unable to find all the mappings of the page (which, on a !DEBUG_VM kernel, would then keep the huge page pinned in memory). When that BUG() was changed to a WARN(), it would later crash on the VM_BUG_ON_VMA(end < vma->vm_start || start >= vma->vm_end, vma) in mm/internal.h:vma_address(), used by rmap_walk_file() for try_to_unmap(). vma_address() is usually correct, but there's a wraparound case when the vm_start address is unusually low, but vm_pgoff not so low: vma_address() chooses max(start, vma->vm_start), but that decides on the wrong address, because start has become almost ULONG_MAX. Rewrite vma_address() to be more careful about vm_pgoff; move the VM_BUG_ON_VMA() out of it, returning -EFAULT for errors, so that it can be safely used from page_mapped_in_vma() and page_address_in_vma() too. Add vma_address_end() to apply similar care to end address calculation, in page_vma_mapped_walk() and page_mkclean_one() and try_to_unmap_one(); though it raises a question of whether callers would do better to supply pvmw->end to page_vma_mapped_walk() - I chose not, for a smaller patch. An irritation is that their apparent generality breaks down on KSM pages, which cannot be located by the page->index that page_to_pgoff() uses: as commit 4b0ece6fa016 ("mm: migrate: fix remove_migration_pte() for ksm pages") once discovered. I dithered over the best thing to do about that, and have ended up with a VM_BUG_ON_PAGE(PageKsm) in both vma_address() and vma_address_end(); though the only place in danger of using it on them was try_to_unmap_one(). Sidenote: vma_address() and vma_address_end() now use compound_nr() on a head page, instead of thp_size(): to make the right calculation on a hugetlbfs page, whether or not THPs are configured. try_to_unmap() is used on hugetlbfs pages, but perhaps the wrong calculation never mattered. Link: https://lkml.kernel.org/r/caf1c1a3-7cfb-7f8f-1beb-ba816e932825@google.com Fixes: a8fa41ad2f6f ("mm, rmap: check all VMAs that PTE-mapped THP can be part of") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:23:56 +00:00
VM_BUG_ON_VMA(address == -EFAULT, vma);
cond_resched();
if (rwc->invalid_vma && rwc->invalid_vma(vma, rwc->arg))
continue;
if (!rwc->rmap_one(folio, vma, address, rwc->arg))
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
break;
if (rwc->done && rwc->done(folio))
break;
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
}
if (!locked)
anon_vma_unlock_read(anon_vma);
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
}
/*
* rmap_walk_file - do something to file page using the object-based rmap method
* @folio: the folio to be handled
* @rwc: control variable according to each walk type
* @locked: caller holds relevant rmap lock
*
* Find all the mappings of a folio using the mapping pointer and the vma chains
* contained in the address_space struct it points to.
*/
static void rmap_walk_file(struct folio *folio,
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
struct rmap_walk_control *rwc, bool locked)
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
{
struct address_space *mapping = folio_mapping(folio);
pgoff_t pgoff_start, pgoff_end;
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
struct vm_area_struct *vma;
/*
* The page lock not only makes sure that page->mapping cannot
* suddenly be NULLified by truncation, it makes sure that the
* structure at mapping cannot be freed and reused yet,
* so we can safely take mapping->i_mmap_rwsem.
*/
VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio);
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
if (!mapping)
return;
pgoff_start = folio_pgoff(folio);
pgoff_end = pgoff_start + folio_nr_pages(folio) - 1;
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
if (!locked) {
if (i_mmap_trylock_read(mapping))
goto lookup;
if (rwc->try_lock) {
rwc->contended = true;
return;
}
i_mmap_lock_read(mapping);
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
}
lookup:
vma_interval_tree_foreach(vma, &mapping->i_mmap,
pgoff_start, pgoff_end) {
unsigned long address = vma_address(&folio->page, vma);
mm/thp: fix vma_address() if virtual address below file offset Running certain tests with a DEBUG_VM kernel would crash within hours, on the total_mapcount BUG() in split_huge_page_to_list(), while trying to free up some memory by punching a hole in a shmem huge page: split's try_to_unmap() was unable to find all the mappings of the page (which, on a !DEBUG_VM kernel, would then keep the huge page pinned in memory). When that BUG() was changed to a WARN(), it would later crash on the VM_BUG_ON_VMA(end < vma->vm_start || start >= vma->vm_end, vma) in mm/internal.h:vma_address(), used by rmap_walk_file() for try_to_unmap(). vma_address() is usually correct, but there's a wraparound case when the vm_start address is unusually low, but vm_pgoff not so low: vma_address() chooses max(start, vma->vm_start), but that decides on the wrong address, because start has become almost ULONG_MAX. Rewrite vma_address() to be more careful about vm_pgoff; move the VM_BUG_ON_VMA() out of it, returning -EFAULT for errors, so that it can be safely used from page_mapped_in_vma() and page_address_in_vma() too. Add vma_address_end() to apply similar care to end address calculation, in page_vma_mapped_walk() and page_mkclean_one() and try_to_unmap_one(); though it raises a question of whether callers would do better to supply pvmw->end to page_vma_mapped_walk() - I chose not, for a smaller patch. An irritation is that their apparent generality breaks down on KSM pages, which cannot be located by the page->index that page_to_pgoff() uses: as commit 4b0ece6fa016 ("mm: migrate: fix remove_migration_pte() for ksm pages") once discovered. I dithered over the best thing to do about that, and have ended up with a VM_BUG_ON_PAGE(PageKsm) in both vma_address() and vma_address_end(); though the only place in danger of using it on them was try_to_unmap_one(). Sidenote: vma_address() and vma_address_end() now use compound_nr() on a head page, instead of thp_size(): to make the right calculation on a hugetlbfs page, whether or not THPs are configured. try_to_unmap() is used on hugetlbfs pages, but perhaps the wrong calculation never mattered. Link: https://lkml.kernel.org/r/caf1c1a3-7cfb-7f8f-1beb-ba816e932825@google.com Fixes: a8fa41ad2f6f ("mm, rmap: check all VMAs that PTE-mapped THP can be part of") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jan Kara <jack@suse.cz> Cc: Jue Wang <juew@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Wang Yugui <wangyugui@e16-tech.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-16 01:23:56 +00:00
VM_BUG_ON_VMA(address == -EFAULT, vma);
cond_resched();
if (rwc->invalid_vma && rwc->invalid_vma(vma, rwc->arg))
continue;
if (!rwc->rmap_one(folio, vma, address, rwc->arg))
goto done;
if (rwc->done && rwc->done(folio))
goto done;
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
}
done:
if (!locked)
i_mmap_unlock_read(mapping);
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
}
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
void rmap_walk(struct folio *folio, struct rmap_walk_control *rwc)
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
{
if (unlikely(folio_test_ksm(folio)))
rmap_walk_ksm(folio, rwc);
else if (folio_test_anon(folio))
rmap_walk_anon(folio, rwc, false);
else
rmap_walk_file(folio, rwc, false);
}
/* Like rmap_walk, but caller holds relevant rmap lock */
mm: don't be stuck to rmap lock on reclaim path The rmap locks(i_mmap_rwsem and anon_vma->root->rwsem) could be contended under memory pressure if processes keep working on their vmas(e.g., fork, mmap, munmap). It makes reclaim path stuck. In our real workload traces, we see kswapd is waiting the lock for 300ms+(worst case, a sec) and it makes other processes entering direct reclaim, which were also stuck on the lock. This patch makes lru aging path try_lock mode like shink_page_list so the reclaim context will keep working with next lru pages without being stuck. if it found the rmap lock contended, it rotates the page back to head of lru in both active/inactive lrus to make them consistent behavior, which is basic starting point rather than adding more heristic. Since this patch introduces a new "contended" field as out-param along with try_lock in-param in rmap_walk_control, it's not immutable any longer if the try_lock is set so remove const keywords on rmap related functions. Since rmap walking is already expensive operation, I doubt the const would help sizable benefit( And we didn't have it until 5.17). In a heavy app workload in Android, trace shows following statistics. It almost removes rmap lock contention from reclaim path. Martin Liu reported: Before: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function 1632 0 1631 151.542173 31672 209 page_lock_anon_vma_read 601 0 601 145.544681 28817 198 rmap_walk_file After: max_dur(ms) min_dur(ms) max-min(dur)ms avg_dur(ms) sum_dur(ms) count blocked_function NaN NaN NaN NaN NaN 0.0 NaN 0 0 0 0.127645 1 12 rmap_walk_file [minchan@kernel.org: add comment, per Matthew] Link: https://lkml.kernel.org/r/YnNqeB5tUf6LZ57b@google.com Link: https://lkml.kernel.org/r/20220510215423.164547-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: John Dias <joaodias@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-19 21:08:54 +00:00
void rmap_walk_locked(struct folio *folio, struct rmap_walk_control *rwc)
{
/* no ksm support for now */
VM_BUG_ON_FOLIO(folio_test_ksm(folio), folio);
if (folio_test_anon(folio))
rmap_walk_anon(folio, rwc, true);
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
else
rmap_walk_file(folio, rwc, true);
ksm: rmap_walk to remove_migation_ptes A side-effect of making ksm pages swappable is that they have to be placed on the LRUs: which then exposes them to isolate_lru_page() and hence to page migration. Add rmap_walk() for remove_migration_ptes() to use: rmap_walk_anon() and rmap_walk_file() in rmap.c, but rmap_walk_ksm() in ksm.c. Perhaps some consolidation with existing code is possible, but don't attempt that yet (try_to_unmap needs to handle nonlinears, but migration pte removal does not). rmap_walk() is sadly less general than it appears: rmap_walk_anon(), like remove_anon_migration_ptes() which it replaces, avoids calling page_lock_anon_vma(), because that includes a page_mapped() test which fails when all migration ptes are in place. That was valid when NUMA page migration was introduced (holding mmap_sem provided the missing guarantee that anon_vma's slab had not already been destroyed), but I believe not valid in the memory hotremove case added since. For now do the same as before, and consider the best way to fix that unlikely race later on. When fixed, we can probably use rmap_walk() on hwpoisoned ksm pages too: for now, they remain among hwpoison's various exceptions (its PageKsm test comes before the page is locked, but its page_lock_anon_vma fails safely if an anon gets upgraded). Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Izik Eidus <ieidus@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 01:59:31 +00:00
}
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
#ifdef CONFIG_HUGETLB_PAGE
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
/*
* The following two functions are for anonymous (private mapped) hugepages.
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
* Unlike common anonymous pages, anonymous hugepages have no accounting code
* and no lru code, because we handle hugepages differently from common pages.
*
* RMAP_COMPOUND is ignored.
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
*/
void hugepage_add_anon_rmap(struct folio *folio, struct vm_area_struct *vma,
unsigned long address, rmap_t flags)
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
{
VM_WARN_ON_FOLIO(!folio_test_anon(folio), folio);
atomic_inc(&folio->_entire_mapcount);
if (flags & RMAP_EXCLUSIVE)
SetPageAnonExclusive(&folio->page);
VM_WARN_ON_FOLIO(folio_entire_mapcount(folio) > 1 &&
PageAnonExclusive(&folio->page), folio);
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
}
void hugepage_add_new_anon_rmap(struct folio *folio,
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
struct vm_area_struct *vma, unsigned long address)
{
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
mm,thp,rmap: simplify compound page mapcount handling Compound page (folio) mapcount calculations have been different for anon and file (or shmem) THPs, and involved the obscure PageDoubleMap flag. And each huge mapping and unmapping of a file (or shmem) THP involved atomically incrementing and decrementing the mapcount of every subpage of that huge page, dirtying many struct page cachelines. Add subpages_mapcount field to the struct folio and first tail page, so that the total of subpage mapcounts is available in one place near the head: then page_mapcount() and total_mapcount() and page_mapped(), and their folio equivalents, are so quick that anon and file and hugetlb don't need to be optimized differently. Delete the unloved PageDoubleMap. page_add and page_remove rmap functions must now maintain the subpages_mapcount as well as the subpage _mapcount, when dealing with pte mappings of huge pages; and correct maintenance of NR_ANON_MAPPED and NR_FILE_MAPPED statistics still needs reading through the subpages, using nr_subpages_unmapped() - but only when first or last pmd mapping finds subpages_mapcount raised (double-map case, not the common case). But are those counts (used to decide when to split an anon THP, and in vmscan's pagecache_reclaimable heuristic) correctly maintained? Not quite: since page_remove_rmap() (and also split_huge_pmd()) is often called without page lock, there can be races when a subpage pte mapcount 0<->1 while compound pmd mapcount 0<->1 is scanning - races which the previous implementation had prevented. The statistics might become inaccurate, and even drift down until they underflow through 0. That is not good enough, but is better dealt with in a followup patch. Update a few comments on first and second tail page overlaid fields. hugepage_add_new_anon_rmap() has to "increment" compound_mapcount, but subpages_mapcount and compound_pincount are already correctly at 0, so delete its reinitialization of compound_pincount. A simple 100 X munmap(mmap(2GB, MAP_SHARED|MAP_POPULATE, tmpfs), 2GB) took 18 seconds on small pages, and used to take 1 second on huge pages, but now takes 119 milliseconds on huge pages. Mapping by pmds a second time used to take 860ms and now takes 92ms; mapping by pmds after mapping by ptes (when the scan is needed) used to take 870ms and now takes 495ms. But there might be some benchmarks which would show a slowdown, because tail struct pages now fall out of cache until final freeing checks them. Link: https://lkml.kernel.org/r/47ad693-717-79c8-e1ba-46c3a6602e48@google.com Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: James Houghton <jthoughton@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev> Cc: Peter Xu <peterx@redhat.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yang Shi <shy828301@gmail.com> Cc: Zach O'Keefe <zokeefe@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-11-03 01:51:38 +00:00
/* increment count (starts at -1) */
atomic_set(&folio->_entire_mapcount, 0);
folio_clear_hugetlb_restore_reserve(folio);
__folio_set_anon(folio, vma, address, true);
SetPageAnonExclusive(&folio->page);
hugetlb, rmap: add reverse mapping for hugepage This patch adds reverse mapping feature for hugepage by introducing mapcount for shared/private-mapped hugepage and anon_vma for private-mapped hugepage. While hugepage is not currently swappable, reverse mapping can be useful for memory error handler. Without this patch, memory error handler cannot identify processes using the bad hugepage nor unmap it from them. That is: - for shared hugepage: we can collect processes using a hugepage through pagecache, but can not unmap the hugepage because of the lack of mapcount. - for privately mapped hugepage: we can neither collect processes nor unmap the hugepage. This patch solves these problems. This patch include the bug fix given by commit 23be7468e8, so reverts it. Dependency: "hugetlb: move definition of is_vm_hugetlb_page() to hugepage_inline.h" ChangeLog since May 24. - create hugetlb_inline.h and move is_vm_hugetlb_index() in it. - move functions setting up anon_vma for hugepage into mm/rmap.c. ChangeLog since May 13. - rebased to 2.6.34 - fix logic error (in case that private mapping and shared mapping coexist) - move is_vm_hugetlb_page() into include/linux/mm.h to use this function from linear_page_index() - define and use linear_hugepage_index() instead of compound_order() - use page_move_anon_rmap() in hugetlb_cow() - copy exclusive switch of __set_page_anon_rmap() into hugepage counterpart. - revert commit 24be7468 completely Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Acked-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2010-05-28 00:29:16 +00:00
}
#endif /* CONFIG_HUGETLB_PAGE */