linux/drivers/gpu/drm/i915/i915_dma.c

1898 lines
51 KiB
C
Raw Normal View History

/* i915_dma.c -- DMA support for the I915 -*- linux-c -*-
*/
/*
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include <linux/pci.h>
#include <linux/vgaarb.h>
#include <linux/acpi.h>
#include <linux/pnp.h>
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
#include <linux/vga_switcheroo.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <acpi/video.h>
#define LP_RING(d) (&((struct drm_i915_private *)(d))->ring[RCS])
#define BEGIN_LP_RING(n) \
intel_ring_begin(LP_RING(dev_priv), (n))
#define OUT_RING(x) \
intel_ring_emit(LP_RING(dev_priv), x)
#define ADVANCE_LP_RING() \
intel_ring_advance(LP_RING(dev_priv))
/**
* Lock test for when it's just for synchronization of ring access.
*
* In that case, we don't need to do it when GEM is initialized as nobody else
* has access to the ring.
*/
#define RING_LOCK_TEST_WITH_RETURN(dev, file) do { \
if (LP_RING(dev->dev_private)->obj == NULL) \
LOCK_TEST_WITH_RETURN(dev, file); \
} while (0)
static inline u32
intel_read_legacy_status_page(struct drm_i915_private *dev_priv, int reg)
{
if (I915_NEED_GFX_HWS(dev_priv->dev))
return ioread32(dev_priv->dri1.gfx_hws_cpu_addr + reg);
else
return intel_read_status_page(LP_RING(dev_priv), reg);
}
#define READ_HWSP(dev_priv, reg) intel_read_legacy_status_page(dev_priv, reg)
#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX)
#define I915_BREADCRUMB_INDEX 0x21
void i915_update_dri1_breadcrumb(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
if (dev->primary->master) {
master_priv = dev->primary->master->driver_priv;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch =
READ_BREADCRUMB(dev_priv);
}
}
static void i915_write_hws_pga(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
u32 addr;
addr = dev_priv->status_page_dmah->busaddr;
if (INTEL_INFO(dev)->gen >= 4)
addr |= (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0;
I915_WRITE(HWS_PGA, addr);
}
/**
* Frees the hardware status page, whether it's a physical address or a virtual
* address set up by the X Server.
*/
static void i915_free_hws(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
if (dev_priv->status_page_dmah) {
drm_pci_free(dev, dev_priv->status_page_dmah);
dev_priv->status_page_dmah = NULL;
}
if (ring->status_page.gfx_addr) {
ring->status_page.gfx_addr = 0;
iounmap(dev_priv->dri1.gfx_hws_cpu_addr);
}
/* Need to rewrite hardware status page */
I915_WRITE(HWS_PGA, 0x1ffff000);
}
void i915_kernel_lost_context(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
/*
* We should never lose context on the ring with modesetting
* as we don't expose it to userspace
*/
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
ring->head = I915_READ_HEAD(ring) & HEAD_ADDR;
ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
ring->space = ring->head - (ring->tail + I915_RING_FREE_SPACE);
if (ring->space < 0)
ring->space += ring->size;
if (!dev->primary->master)
return;
master_priv = dev->primary->master->driver_priv;
if (ring->head == ring->tail && master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_RING_EMPTY;
}
static int i915_dma_cleanup(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i;
/* Make sure interrupts are disabled here because the uninstall ioctl
* may not have been called from userspace and after dev_private
* is freed, it's too late.
*/
if (dev->irq_enabled)
drm_irq_uninstall(dev);
mutex_lock(&dev->struct_mutex);
for (i = 0; i < I915_NUM_RINGS; i++)
intel_cleanup_ring_buffer(&dev_priv->ring[i]);
mutex_unlock(&dev->struct_mutex);
/* Clear the HWS virtual address at teardown */
if (I915_NEED_GFX_HWS(dev))
i915_free_hws(dev);
return 0;
}
static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 09:57:11 +00:00
int ret;
master_priv->sarea = drm_getsarea(dev);
if (master_priv->sarea) {
master_priv->sarea_priv = (drm_i915_sarea_t *)
((u8 *)master_priv->sarea->handle + init->sarea_priv_offset);
} else {
DRM_DEBUG_DRIVER("sarea not found assuming DRI2 userspace\n");
}
if (init->ring_size != 0) {
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 09:57:11 +00:00
if (LP_RING(dev_priv)->obj != NULL) {
i915_dma_cleanup(dev);
DRM_ERROR("Client tried to initialize ringbuffer in "
"GEM mode\n");
return -EINVAL;
}
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 09:57:11 +00:00
ret = intel_render_ring_init_dri(dev,
init->ring_start,
init->ring_size);
if (ret) {
i915_dma_cleanup(dev);
drm/i915: Initialise ring vfuncs for old DRI paths We weren't setting up the vfunc table when initialising the old DRI ringbuffer, leading to such OOPSes as: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<(null)>] (null) PGD 10c441067 PUD 1185e5067 PMD 0 Oops: 0010 [#1] PREEMPT SMP last sysfs file: /sys/class/dmi/id/chassis_asset_tag CPU 3 Modules linked in: i915 drm_kms_helper drm fb fbdev i2c_algo_bit cfbcopyarea video backlight output cfbimgblt cfbfillrect autofs4 ipv6 nfs lockd fscache nfs_acl auth_rpcgss sunrpc coretemp hwmon_vid mousedev usbhid hid option usb_wwan snd_hda_codec_via asus_atk0110 atl1e usbserial snd_hda_intel snd_hda_codec firmware_class snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device processor parport_pc thermal snd thermal_sys parport 8250_pnp button rng_core rtc_cmos shpchp hwmon rtc_core ehci_hcd pci_hotplug uhci_hcd soundcore tpm_tis i2c_i801 rtc_lib tpm serio_raw snd_page_alloc tpm_bios i2c_core usbcore psmouse intel_agp sg pcspkr sr_mod evdev cdrom ext3 jbd mbcache dm_mod sd_mod ata_piix libata scsi_mod unix Jan 18 15:49:29 lithui kernel: Pid: 3605, comm: Xorg Not tainted 2.6.36.2 #5 P5KPL-CM/System Product Name RIP: 0010:[<0000000000000000>] [<(null)>] (null) RSP: 0018:ffff8801150d1d40 EFLAGS: 00010202 RAX: 000000000001ffff RBX: ffff88011a011b00 RCX: 000000000001a704 RDX: ffff880118566028 RSI: ffff880118566028 RDI: ffff880117876800 RBP: ffff8801150d1d48 R08: ffff8801195fe300 R09: 00000000c0086444 R10: 0000000000000001 R11: 0000000000003206 R12: ffff880117876800 R13: ffff880118566000 R14: ffff880117876820 R15: ffff8801150d1df8 FS: 00007f1038d456e0(0000) GS:ffff880001780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001187e7000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process Xorg (pid: 3605, threadinfo ffff8801150d0000, task ffff88011b016e40) Stack: ffffffffa043b8e6 ffff8801150d1d98 ffffffffa041768b dead000000000000 <0> 0000000000000048 00007f1023f2a000 0000000000000044 0000000000000008 <0> ffff88010d26bd80 ffff880117876800 ffff8801150d1df8 ffff8801150d1ea8 Call Trace: [<ffffffffa043b8e6>] ? intel_ring_advance+0x16/0x20 [i915] [<ffffffffa041768b>] i915_irq_emit+0x15b/0x240 [i915] [<ffffffffa03ea7b1>] drm_ioctl+0x1f1/0x460 [drm] [<ffffffffa0417530>] ? i915_irq_emit+0x0/0x240 [i915] [<ffffffff810dd8f1>] ? do_sync_read+0xd1/0x120 [<ffffffff81025b1f>] ? do_page_fault+0x1df/0x3d0 [<ffffffff810ed5c7>] do_vfs_ioctl+0x97/0x550 [<ffffffff8115c2ea>] ? security_file_permission+0x7a/0x90 [<ffffffff810edb19>] sys_ioctl+0x99/0xa0 [<ffffffff810024ab>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [<(null)>] (null) RSP <ffff8801150d1d40> CR2: 0000000000000000 Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Herbert Xu <herbert@gondor.apana.org.au> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29153 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=23172 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-01-20 09:57:11 +00:00
return ret;
}
}
dev_priv->dri1.cpp = init->cpp;
dev_priv->dri1.back_offset = init->back_offset;
dev_priv->dri1.front_offset = init->front_offset;
dev_priv->dri1.current_page = 0;
if (master_priv->sarea_priv)
master_priv->sarea_priv->pf_current_page = 0;
/* Allow hardware batchbuffers unless told otherwise.
*/
dev_priv->dri1.allow_batchbuffer = 1;
return 0;
}
static int i915_dma_resume(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
DRM_DEBUG_DRIVER("%s\n", __func__);
if (ring->virtual_start == NULL) {
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
return -ENOMEM;
}
/* Program Hardware Status Page */
if (!ring->status_page.page_addr) {
DRM_ERROR("Can not find hardware status page\n");
return -EINVAL;
}
DRM_DEBUG_DRIVER("hw status page @ %p\n",
ring->status_page.page_addr);
if (ring->status_page.gfx_addr != 0)
intel_ring_setup_status_page(ring);
else
i915_write_hws_pga(dev);
DRM_DEBUG_DRIVER("Enabled hardware status page\n");
return 0;
}
static int i915_dma_init(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_init_t *init = data;
int retcode = 0;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
switch (init->func) {
case I915_INIT_DMA:
retcode = i915_initialize(dev, init);
break;
case I915_CLEANUP_DMA:
retcode = i915_dma_cleanup(dev);
break;
case I915_RESUME_DMA:
retcode = i915_dma_resume(dev);
break;
default:
retcode = -EINVAL;
break;
}
return retcode;
}
/* Implement basically the same security restrictions as hardware does
* for MI_BATCH_NON_SECURE. These can be made stricter at any time.
*
* Most of the calculations below involve calculating the size of a
* particular instruction. It's important to get the size right as
* that tells us where the next instruction to check is. Any illegal
* instruction detected will be given a size of zero, which is a
* signal to abort the rest of the buffer.
*/
static int validate_cmd(int cmd)
{
switch (((cmd >> 29) & 0x7)) {
case 0x0:
switch ((cmd >> 23) & 0x3f) {
case 0x0:
return 1; /* MI_NOOP */
case 0x4:
return 1; /* MI_FLUSH */
default:
return 0; /* disallow everything else */
}
break;
case 0x1:
return 0; /* reserved */
case 0x2:
return (cmd & 0xff) + 2; /* 2d commands */
case 0x3:
if (((cmd >> 24) & 0x1f) <= 0x18)
return 1;
switch ((cmd >> 24) & 0x1f) {
case 0x1c:
return 1;
case 0x1d:
switch ((cmd >> 16) & 0xff) {
case 0x3:
return (cmd & 0x1f) + 2;
case 0x4:
return (cmd & 0xf) + 2;
default:
return (cmd & 0xffff) + 2;
}
case 0x1e:
if (cmd & (1 << 23))
return (cmd & 0xffff) + 1;
else
return 1;
case 0x1f:
if ((cmd & (1 << 23)) == 0) /* inline vertices */
return (cmd & 0x1ffff) + 2;
else if (cmd & (1 << 17)) /* indirect random */
if ((cmd & 0xffff) == 0)
return 0; /* unknown length, too hard */
else
return (((cmd & 0xffff) + 1) / 2) + 1;
else
return 2; /* indirect sequential */
default:
return 0;
}
default:
return 0;
}
return 0;
}
static int i915_emit_cmds(struct drm_device * dev, int *buffer, int dwords)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int i, ret;
if ((dwords+1) * sizeof(int) >= LP_RING(dev_priv)->size - 8)
return -EINVAL;
for (i = 0; i < dwords;) {
int sz = validate_cmd(buffer[i]);
if (sz == 0 || i + sz > dwords)
return -EINVAL;
i += sz;
}
ret = BEGIN_LP_RING((dwords+1)&~1);
if (ret)
return ret;
for (i = 0; i < dwords; i++)
OUT_RING(buffer[i]);
if (dwords & 1)
OUT_RING(0);
ADVANCE_LP_RING();
return 0;
}
int
i915_emit_box(struct drm_device *dev,
struct drm_clip_rect *box,
int DR1, int DR4)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
if (box->y2 <= box->y1 || box->x2 <= box->x1 ||
box->y2 <= 0 || box->x2 <= 0) {
DRM_ERROR("Bad box %d,%d..%d,%d\n",
box->x1, box->y1, box->x2, box->y2);
return -EINVAL;
}
if (INTEL_INFO(dev)->gen >= 4) {
ret = BEGIN_LP_RING(4);
if (ret)
return ret;
OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
OUT_RING((box->x1 & 0xffff) | (box->y1 << 16));
OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16));
OUT_RING(DR4);
} else {
ret = BEGIN_LP_RING(6);
if (ret)
return ret;
OUT_RING(GFX_OP_DRAWRECT_INFO);
OUT_RING(DR1);
OUT_RING((box->x1 & 0xffff) | (box->y1 << 16));
OUT_RING(((box->x2 - 1) & 0xffff) | ((box->y2 - 1) << 16));
OUT_RING(DR4);
OUT_RING(0);
}
ADVANCE_LP_RING();
return 0;
}
/* XXX: Emitting the counter should really be moved to part of the IRQ
* emit. For now, do it in both places:
*/
static void i915_emit_breadcrumb(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
dev_priv->dri1.counter++;
if (dev_priv->dri1.counter > 0x7FFFFFFFUL)
dev_priv->dri1.counter = 0;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_enqueue = dev_priv->dri1.counter;
if (BEGIN_LP_RING(4) == 0) {
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->dri1.counter);
OUT_RING(0);
ADVANCE_LP_RING();
}
}
static int i915_dispatch_cmdbuffer(struct drm_device * dev,
drm_i915_cmdbuffer_t *cmd,
struct drm_clip_rect *cliprects,
void *cmdbuf)
{
int nbox = cmd->num_cliprects;
int i = 0, count, ret;
if (cmd->sz & 0x3) {
DRM_ERROR("alignment");
return -EINVAL;
}
i915_kernel_lost_context(dev);
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
if (i < nbox) {
ret = i915_emit_box(dev, &cliprects[i],
cmd->DR1, cmd->DR4);
if (ret)
return ret;
}
ret = i915_emit_cmds(dev, cmdbuf, cmd->sz / 4);
if (ret)
return ret;
}
i915_emit_breadcrumb(dev);
return 0;
}
static int i915_dispatch_batchbuffer(struct drm_device * dev,
drm_i915_batchbuffer_t * batch,
struct drm_clip_rect *cliprects)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int nbox = batch->num_cliprects;
int i, count, ret;
if ((batch->start | batch->used) & 0x7) {
DRM_ERROR("alignment");
return -EINVAL;
}
i915_kernel_lost_context(dev);
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
if (i < nbox) {
ret = i915_emit_box(dev, &cliprects[i],
batch->DR1, batch->DR4);
if (ret)
return ret;
}
if (!IS_I830(dev) && !IS_845G(dev)) {
ret = BEGIN_LP_RING(2);
if (ret)
return ret;
if (INTEL_INFO(dev)->gen >= 4) {
OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965);
OUT_RING(batch->start);
} else {
OUT_RING(MI_BATCH_BUFFER_START | (2 << 6));
OUT_RING(batch->start | MI_BATCH_NON_SECURE);
}
} else {
ret = BEGIN_LP_RING(4);
if (ret)
return ret;
OUT_RING(MI_BATCH_BUFFER);
OUT_RING(batch->start | MI_BATCH_NON_SECURE);
OUT_RING(batch->start + batch->used - 4);
OUT_RING(0);
}
ADVANCE_LP_RING();
}
if (IS_G4X(dev) || IS_GEN5(dev)) {
if (BEGIN_LP_RING(2) == 0) {
OUT_RING(MI_FLUSH | MI_NO_WRITE_FLUSH | MI_INVALIDATE_ISP);
OUT_RING(MI_NOOP);
ADVANCE_LP_RING();
}
}
i915_emit_breadcrumb(dev);
return 0;
}
static int i915_dispatch_flip(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv =
dev->primary->master->driver_priv;
int ret;
if (!master_priv->sarea_priv)
return -EINVAL;
DRM_DEBUG_DRIVER("%s: page=%d pfCurrentPage=%d\n",
__func__,
dev_priv->dri1.current_page,
master_priv->sarea_priv->pf_current_page);
i915_kernel_lost_context(dev);
ret = BEGIN_LP_RING(10);
if (ret)
return ret;
OUT_RING(MI_FLUSH | MI_READ_FLUSH);
OUT_RING(0);
OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP);
OUT_RING(0);
if (dev_priv->dri1.current_page == 0) {
OUT_RING(dev_priv->dri1.back_offset);
dev_priv->dri1.current_page = 1;
} else {
OUT_RING(dev_priv->dri1.front_offset);
dev_priv->dri1.current_page = 0;
}
OUT_RING(0);
OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP);
OUT_RING(0);
ADVANCE_LP_RING();
master_priv->sarea_priv->last_enqueue = dev_priv->dri1.counter++;
if (BEGIN_LP_RING(4) == 0) {
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->dri1.counter);
OUT_RING(0);
ADVANCE_LP_RING();
}
master_priv->sarea_priv->pf_current_page = dev_priv->dri1.current_page;
return 0;
}
static int i915_quiescent(struct drm_device *dev)
{
i915_kernel_lost_context(dev);
return intel_ring_idle(LP_RING(dev->dev_private));
}
static int i915_flush_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
int ret;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
ret = i915_quiescent(dev);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static int i915_batchbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
master_priv->sarea_priv;
drm_i915_batchbuffer_t *batch = data;
int ret;
struct drm_clip_rect *cliprects = NULL;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!dev_priv->dri1.allow_batchbuffer) {
DRM_ERROR("Batchbuffer ioctl disabled\n");
return -EINVAL;
}
DRM_DEBUG_DRIVER("i915 batchbuffer, start %x used %d cliprects %d\n",
batch->start, batch->used, batch->num_cliprects);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
if (batch->num_cliprects < 0)
return -EINVAL;
if (batch->num_cliprects) {
cliprects = kcalloc(batch->num_cliprects,
sizeof(struct drm_clip_rect),
GFP_KERNEL);
if (cliprects == NULL)
return -ENOMEM;
ret = copy_from_user(cliprects, batch->cliprects,
batch->num_cliprects *
sizeof(struct drm_clip_rect));
if (ret != 0) {
ret = -EFAULT;
goto fail_free;
}
}
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_batchbuffer(dev, batch, cliprects);
mutex_unlock(&dev->struct_mutex);
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
fail_free:
kfree(cliprects);
return ret;
}
static int i915_cmdbuffer(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
master_priv->sarea_priv;
drm_i915_cmdbuffer_t *cmdbuf = data;
struct drm_clip_rect *cliprects = NULL;
void *batch_data;
int ret;
DRM_DEBUG_DRIVER("i915 cmdbuffer, buf %p sz %d cliprects %d\n",
cmdbuf->buf, cmdbuf->sz, cmdbuf->num_cliprects);
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
if (cmdbuf->num_cliprects < 0)
return -EINVAL;
batch_data = kmalloc(cmdbuf->sz, GFP_KERNEL);
if (batch_data == NULL)
return -ENOMEM;
ret = copy_from_user(batch_data, cmdbuf->buf, cmdbuf->sz);
if (ret != 0) {
ret = -EFAULT;
goto fail_batch_free;
}
if (cmdbuf->num_cliprects) {
cliprects = kcalloc(cmdbuf->num_cliprects,
sizeof(struct drm_clip_rect), GFP_KERNEL);
if (cliprects == NULL) {
ret = -ENOMEM;
goto fail_batch_free;
}
ret = copy_from_user(cliprects, cmdbuf->cliprects,
cmdbuf->num_cliprects *
sizeof(struct drm_clip_rect));
if (ret != 0) {
ret = -EFAULT;
goto fail_clip_free;
}
}
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_cmdbuffer(dev, cmdbuf, cliprects, batch_data);
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
goto fail_clip_free;
}
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
fail_clip_free:
kfree(cliprects);
fail_batch_free:
kfree(batch_data);
return ret;
}
static int i915_emit_irq(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
i915_kernel_lost_context(dev);
DRM_DEBUG_DRIVER("\n");
dev_priv->dri1.counter++;
if (dev_priv->dri1.counter > 0x7FFFFFFFUL)
dev_priv->dri1.counter = 1;
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_enqueue = dev_priv->dri1.counter;
if (BEGIN_LP_RING(4) == 0) {
OUT_RING(MI_STORE_DWORD_INDEX);
OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->dri1.counter);
OUT_RING(MI_USER_INTERRUPT);
ADVANCE_LP_RING();
}
return dev_priv->dri1.counter;
}
static int i915_wait_irq(struct drm_device * dev, int irq_nr)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
int ret = 0;
struct intel_ring_buffer *ring = LP_RING(dev_priv);
DRM_DEBUG_DRIVER("irq_nr=%d breadcrumb=%d\n", irq_nr,
READ_BREADCRUMB(dev_priv));
if (READ_BREADCRUMB(dev_priv) >= irq_nr) {
if (master_priv->sarea_priv)
master_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
return 0;
}
if (master_priv->sarea_priv)
master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
if (ring->irq_get(ring)) {
DRM_WAIT_ON(ret, ring->irq_queue, 3 * DRM_HZ,
READ_BREADCRUMB(dev_priv) >= irq_nr);
ring->irq_put(ring);
} else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000))
ret = -EBUSY;
if (ret == -EBUSY) {
DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",
READ_BREADCRUMB(dev_priv), (int)dev_priv->dri1.counter);
}
return ret;
}
/* Needs the lock as it touches the ring.
*/
static int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_emit_t *emit = data;
int result;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!dev_priv || !LP_RING(dev_priv)->virtual_start) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
result = i915_emit_irq(dev);
mutex_unlock(&dev->struct_mutex);
if (DRM_COPY_TO_USER(emit->irq_seq, &result, sizeof(int))) {
DRM_ERROR("copy_to_user\n");
return -EFAULT;
}
return 0;
}
/* Doesn't need the hardware lock.
*/
static int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_irq_wait_t *irqwait = data;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
return i915_wait_irq(dev, irqwait->irq_seq);
}
static int i915_vblank_pipe_get(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_pipe_t *pipe = data;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
pipe->pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
return 0;
}
/**
* Schedule buffer swap at given vertical blank.
*/
static int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
/* The delayed swap mechanism was fundamentally racy, and has been
* removed. The model was that the client requested a delayed flip/swap
* from the kernel, then waited for vblank before continuing to perform
* rendering. The problem was that the kernel might wake the client
* up before it dispatched the vblank swap (since the lock has to be
* held while touching the ringbuffer), in which case the client would
* clear and start the next frame before the swap occurred, and
* flicker would occur in addition to likely missing the vblank.
*
* In the absence of this ioctl, userland falls back to a correct path
* of waiting for a vblank, then dispatching the swap on its own.
* Context switching to userland and back is plenty fast enough for
* meeting the requirements of vblank swapping.
*/
return -EINVAL;
}
static int i915_flip_bufs(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
int ret;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
DRM_DEBUG_DRIVER("%s\n", __func__);
RING_LOCK_TEST_WITH_RETURN(dev, file_priv);
mutex_lock(&dev->struct_mutex);
ret = i915_dispatch_flip(dev);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static int i915_getparam(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_getparam_t *param = data;
int value;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
switch (param->param) {
case I915_PARAM_IRQ_ACTIVE:
value = dev->pdev->irq ? 1 : 0;
break;
case I915_PARAM_ALLOW_BATCHBUFFER:
value = dev_priv->dri1.allow_batchbuffer ? 1 : 0;
break;
case I915_PARAM_LAST_DISPATCH:
value = READ_BREADCRUMB(dev_priv);
break;
case I915_PARAM_CHIPSET_ID:
value = dev->pci_device;
break;
case I915_PARAM_HAS_GEM:
value = 1;
break;
case I915_PARAM_NUM_FENCES_AVAIL:
value = dev_priv->num_fence_regs - dev_priv->fence_reg_start;
break;
case I915_PARAM_HAS_OVERLAY:
value = dev_priv->overlay ? 1 : 0;
break;
case I915_PARAM_HAS_PAGEFLIPPING:
value = 1;
break;
case I915_PARAM_HAS_EXECBUF2:
/* depends on GEM */
value = 1;
break;
case I915_PARAM_HAS_BSD:
value = intel_ring_initialized(&dev_priv->ring[VCS]);
break;
case I915_PARAM_HAS_BLT:
value = intel_ring_initialized(&dev_priv->ring[BCS]);
break;
case I915_PARAM_HAS_VEBOX:
value = intel_ring_initialized(&dev_priv->ring[VECS]);
break;
case I915_PARAM_HAS_RELAXED_FENCING:
value = 1;
break;
case I915_PARAM_HAS_COHERENT_RINGS:
value = 1;
break;
case I915_PARAM_HAS_EXEC_CONSTANTS:
value = INTEL_INFO(dev)->gen >= 4;
break;
case I915_PARAM_HAS_RELAXED_DELTA:
value = 1;
break;
case I915_PARAM_HAS_GEN7_SOL_RESET:
value = 1;
break;
case I915_PARAM_HAS_LLC:
value = HAS_LLC(dev);
break;
case I915_PARAM_HAS_ALIASING_PPGTT:
value = dev_priv->mm.aliasing_ppgtt ? 1 : 0;
break;
case I915_PARAM_HAS_WAIT_TIMEOUT:
value = 1;
break;
case I915_PARAM_HAS_SEMAPHORES:
value = i915_semaphore_is_enabled(dev);
break;
case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
value = 1;
break;
case I915_PARAM_HAS_SECURE_BATCHES:
value = capable(CAP_SYS_ADMIN);
break;
case I915_PARAM_HAS_PINNED_BATCHES:
value = 1;
break;
case I915_PARAM_HAS_EXEC_NO_RELOC:
value = 1;
break;
case I915_PARAM_HAS_EXEC_HANDLE_LUT:
value = 1;
break;
default:
DRM_DEBUG("Unknown parameter %d\n", param->param);
return -EINVAL;
}
if (DRM_COPY_TO_USER(param->value, &value, sizeof(int))) {
DRM_ERROR("DRM_COPY_TO_USER failed\n");
return -EFAULT;
}
return 0;
}
static int i915_setparam(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_setparam_t *param = data;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
switch (param->param) {
case I915_SETPARAM_USE_MI_BATCHBUFFER_START:
break;
case I915_SETPARAM_TEX_LRU_LOG_GRANULARITY:
break;
case I915_SETPARAM_ALLOW_BATCHBUFFER:
dev_priv->dri1.allow_batchbuffer = param->value ? 1 : 0;
break;
case I915_SETPARAM_NUM_USED_FENCES:
if (param->value > dev_priv->num_fence_regs ||
param->value < 0)
return -EINVAL;
/* Userspace can use first N regs */
dev_priv->fence_reg_start = param->value;
break;
default:
DRM_DEBUG_DRIVER("unknown parameter %d\n",
param->param);
return -EINVAL;
}
return 0;
}
static int i915_set_status_page(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_hws_addr_t *hws = data;
struct intel_ring_buffer *ring;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
if (!I915_NEED_GFX_HWS(dev))
return -EINVAL;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
WARN(1, "tried to set status page when mode setting active\n");
return 0;
}
DRM_DEBUG_DRIVER("set status page addr 0x%08x\n", (u32)hws->addr);
ring = LP_RING(dev_priv);
ring->status_page.gfx_addr = hws->addr & (0x1ffff<<12);
dev_priv->dri1.gfx_hws_cpu_addr =
ioremap_wc(dev_priv->gtt.mappable_base + hws->addr, 4096);
if (dev_priv->dri1.gfx_hws_cpu_addr == NULL) {
i915_dma_cleanup(dev);
ring->status_page.gfx_addr = 0;
DRM_ERROR("can not ioremap virtual address for"
" G33 hw status page\n");
return -ENOMEM;
}
memset_io(dev_priv->dri1.gfx_hws_cpu_addr, 0, PAGE_SIZE);
I915_WRITE(HWS_PGA, ring->status_page.gfx_addr);
DRM_DEBUG_DRIVER("load hws HWS_PGA with gfx mem 0x%x\n",
ring->status_page.gfx_addr);
DRM_DEBUG_DRIVER("load hws at %p\n",
ring->status_page.page_addr);
return 0;
}
static int i915_get_bridge_dev(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev_priv->bridge_dev = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!dev_priv->bridge_dev) {
DRM_ERROR("bridge device not found\n");
return -1;
}
return 0;
}
#define MCHBAR_I915 0x44
#define MCHBAR_I965 0x48
#define MCHBAR_SIZE (4*4096)
#define DEVEN_REG 0x54
#define DEVEN_MCHBAR_EN (1 << 28)
/* Allocate space for the MCH regs if needed, return nonzero on error */
static int
intel_alloc_mchbar_resource(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
u32 temp_lo, temp_hi = 0;
u64 mchbar_addr;
int ret;
if (INTEL_INFO(dev)->gen >= 4)
pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
#ifdef CONFIG_PNP
if (mchbar_addr &&
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
return 0;
#endif
/* Get some space for it */
dev_priv->mch_res.name = "i915 MCHBAR";
dev_priv->mch_res.flags = IORESOURCE_MEM;
ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
&dev_priv->mch_res,
MCHBAR_SIZE, MCHBAR_SIZE,
PCIBIOS_MIN_MEM,
0, pcibios_align_resource,
dev_priv->bridge_dev);
if (ret) {
DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
dev_priv->mch_res.start = 0;
return ret;
}
if (INTEL_INFO(dev)->gen >= 4)
pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
upper_32_bits(dev_priv->mch_res.start));
pci_write_config_dword(dev_priv->bridge_dev, reg,
lower_32_bits(dev_priv->mch_res.start));
return 0;
}
/* Setup MCHBAR if possible, return true if we should disable it again */
static void
intel_setup_mchbar(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
u32 temp;
bool enabled;
dev_priv->mchbar_need_disable = false;
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
enabled = !!(temp & DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
enabled = temp & 1;
}
/* If it's already enabled, don't have to do anything */
if (enabled)
return;
if (intel_alloc_mchbar_resource(dev))
return;
dev_priv->mchbar_need_disable = true;
/* Space is allocated or reserved, so enable it. */
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG,
temp | DEVEN_MCHBAR_EN);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
}
}
static void
intel_teardown_mchbar(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
int mchbar_reg = INTEL_INFO(dev)->gen >= 4 ? MCHBAR_I965 : MCHBAR_I915;
u32 temp;
if (dev_priv->mchbar_need_disable) {
if (IS_I915G(dev) || IS_I915GM(dev)) {
pci_read_config_dword(dev_priv->bridge_dev, DEVEN_REG, &temp);
temp &= ~DEVEN_MCHBAR_EN;
pci_write_config_dword(dev_priv->bridge_dev, DEVEN_REG, temp);
} else {
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
temp &= ~1;
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp);
}
}
if (dev_priv->mch_res.start)
release_resource(&dev_priv->mch_res);
}
/* true = enable decode, false = disable decoder */
static unsigned int i915_vga_set_decode(void *cookie, bool state)
{
struct drm_device *dev = cookie;
intel_modeset_vga_set_state(dev, state);
if (state)
return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
else
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
{
struct drm_device *dev = pci_get_drvdata(pdev);
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
if (state == VGA_SWITCHEROO_ON) {
pr_info("switched on\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* i915 resume handler doesn't set to D0 */
pci_set_power_state(dev->pdev, PCI_D0);
i915_resume(dev);
dev->switch_power_state = DRM_SWITCH_POWER_ON;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
} else {
pr_err("switched off\n");
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
i915_suspend(dev, pmm);
dev->switch_power_state = DRM_SWITCH_POWER_OFF;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
}
static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
bool can_switch;
spin_lock(&dev->count_lock);
can_switch = (dev->open_count == 0);
spin_unlock(&dev->count_lock);
return can_switch;
}
static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
.set_gpu_state = i915_switcheroo_set_state,
.reprobe = NULL,
.can_switch = i915_switcheroo_can_switch,
};
static int i915_load_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
ret = intel_parse_bios(dev);
if (ret)
DRM_INFO("failed to find VBIOS tables\n");
/* If we have > 1 VGA cards, then we need to arbitrate access
* to the common VGA resources.
*
* If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
* then we do not take part in VGA arbitration and the
* vga_client_register() fails with -ENODEV.
*/
ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
if (ret && ret != -ENODEV)
goto out;
intel_register_dsm_handler();
ret = vga_switcheroo_register_client(dev->pdev, &i915_switcheroo_ops);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (ret)
goto cleanup_vga_client;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* Initialise stolen first so that we may reserve preallocated
* objects for the BIOS to KMS transition.
*/
ret = i915_gem_init_stolen(dev);
if (ret)
goto cleanup_vga_switcheroo;
ret = drm_irq_install(dev);
if (ret)
goto cleanup_gem_stolen;
/* Important: The output setup functions called by modeset_init need
* working irqs for e.g. gmbus and dp aux transfers. */
intel_modeset_init(dev);
ret = i915_gem_init(dev);
if (ret)
goto cleanup_irq;
INIT_WORK(&dev_priv->console_resume_work, intel_console_resume);
intel_modeset_gem_init(dev);
/* Always safe in the mode setting case. */
/* FIXME: do pre/post-mode set stuff in core KMS code */
dev->vblank_disable_allowed = 1;
if (INTEL_INFO(dev)->num_pipes == 0)
return 0;
ret = intel_fbdev_init(dev);
if (ret)
goto cleanup_gem;
drm/i915: Fixup hpd irq register setup ordering For GMCH platforms we set up the hpd irq registers in the irq postinstall hook. But since we only enable the irq sources we actually need in PORT_HOTPLUG_EN/STATUS, taking dev_priv->hotplug_supported_mask into account, no hpd interrupt sources is enabled since commit 52d7ecedac3f96fb562cb482c139015372728638 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup Wrongly set-up interrupts also lead to broken hw-based load-detection on at least GM45, resulting in ghost VGA/TV-out outputs. To fix this, delay the hotplug register setup until after all outputs are set up, by moving it into a new dev_priv->display.hpd_irq_callback. We might also move the PCH_SPLIT platforms to such a setup eventually. Another funny part is that we need to delay the fbdev initial config probing until after the hpd regs are setup, for otherwise it'll detect ghost outputs. But we can only enable the hpd interrupt handling itself (and the output polling) _after_ that initial scan, due to massive locking brain-damage in the fbdev setup code. Add a big comment to explain this cute little dragon lair. v2: Encapsulate all the fbdev handling by wrapping the move call into intel_fbdev_initial_config in intel_fb.c. Requested by Chris Wilson. v3: Applied bikeshed from Jesse Barnes. v4: Imre Deak noticed that we also need to call intel_hpd_init after the drm_irqinstall calls in the gpu reset and resume paths - otherwise hotplug will be broken. Also improve the comment a bit about why hpd_init needs to be called before we set up the initial fbdev config. Bugzilla: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54943 Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v3) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 13:05:07 +00:00
/* Only enable hotplug handling once the fbdev is fully set up. */
intel_hpd_init(dev);
/*
* Some ports require correctly set-up hpd registers for detection to
* work properly (leading to ghost connected connector status), e.g. VGA
* on gm45. Hence we can only set up the initial fbdev config after hpd
* irqs are fully enabled. Now we should scan for the initial config
* only once hotplug handling is enabled, but due to screwed-up locking
* around kms/fbdev init we can't protect the fdbev initial config
* scanning against hotplug events. Hence do this first and ignore the
* tiny window where we will loose hotplug notifactions.
*/
intel_fbdev_initial_config(dev);
/* Only enable hotplug handling once the fbdev is fully set up. */
dev_priv->enable_hotplug_processing = true;
drm_kms_helper_poll_init(dev);
return 0;
cleanup_gem:
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
i915_gem_context_fini(dev);
mutex_unlock(&dev->struct_mutex);
i915_gem_cleanup_aliasing_ppgtt(dev);
drm_mm_takedown(&dev_priv->gtt.base.mm);
cleanup_irq:
drm_irq_uninstall(dev);
cleanup_gem_stolen:
i915_gem_cleanup_stolen(dev);
cleanup_vga_switcheroo:
vga_switcheroo_unregister_client(dev->pdev);
cleanup_vga_client:
vga_client_register(dev->pdev, NULL, NULL, NULL);
out:
return ret;
}
int i915_master_create(struct drm_device *dev, struct drm_master *master)
{
struct drm_i915_master_private *master_priv;
master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
if (!master_priv)
return -ENOMEM;
master->driver_priv = master_priv;
return 0;
}
void i915_master_destroy(struct drm_device *dev, struct drm_master *master)
{
struct drm_i915_master_private *master_priv = master->driver_priv;
if (!master_priv)
return;
kfree(master_priv);
master->driver_priv = NULL;
}
static void i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
{
struct apertures_struct *ap;
struct pci_dev *pdev = dev_priv->dev->pdev;
bool primary;
ap = alloc_apertures(1);
if (!ap)
return;
ap->ranges[0].base = dev_priv->gtt.mappable_base;
ap->ranges[0].size = dev_priv->gtt.mappable_end;
primary =
pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
kfree(ap);
}
static void i915_dump_device_info(struct drm_i915_private *dev_priv)
{
const struct intel_device_info *info = dev_priv->info;
#define PRINT_S(name) "%s"
#define SEP_EMPTY
#define PRINT_FLAG(name) info->name ? #name "," : ""
#define SEP_COMMA ,
DRM_DEBUG_DRIVER("i915 device info: gen=%i, pciid=0x%04x flags="
DEV_INFO_FOR_EACH_FLAG(PRINT_S, SEP_EMPTY),
info->gen,
dev_priv->dev->pdev->device,
DEV_INFO_FOR_EACH_FLAG(PRINT_FLAG, SEP_COMMA));
#undef PRINT_S
#undef SEP_EMPTY
#undef PRINT_FLAG
#undef SEP_COMMA
}
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
*
* The driver load routine has to do several things:
* - drive output discovery via intel_modeset_init()
* - initialize the memory manager
* - allocate initial config memory
* - setup the DRM framebuffer with the allocated memory
*/
int i915_driver_load(struct drm_device *dev, unsigned long flags)
{
struct drm_i915_private *dev_priv;
struct intel_device_info *info;
int ret = 0, mmio_bar, mmio_size;
uint32_t aperture_size;
info = (struct intel_device_info *) flags;
/* Refuse to load on gen6+ without kms enabled. */
if (info->gen >= 6 && !drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
/* i915 has 4 more counters */
dev->counters += 4;
dev->types[6] = _DRM_STAT_IRQ;
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
dev->types[9] = _DRM_STAT_DMA;
dev_priv = kzalloc(sizeof(drm_i915_private_t), GFP_KERNEL);
if (dev_priv == NULL)
return -ENOMEM;
dev->dev_private = (void *)dev_priv;
dev_priv->dev = dev;
dev_priv->info = info;
drm/i915: fix long-standing SNB regression in power consumption after resume v2 This patch fixes regression in power consumtion of sandy bridge gpu, which exists since v3.6 Sometimes after resuming from s2ram gpu starts thinking that it's extremely busy. After that it never reaches rc6 state. Bug exists since kernel v3.6: commit b4ae3f22d238617ca11610b29fde16cf8c0bc6e0 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jun 14 11:04:48 2012 -0700 drm/i915: load boot context at driver init time For some reason RC6 is already enabled at the beginning of resuming process. Following initliaztion breaks some internal state and confuses RPS engine. This patch disables RC6 at the beginnig of resume and initialization. I've rearranged initialization sequence, because intel_disable_gt_powersave() needs initialized force_wake_get/put and some locks from the dev_priv. Note: The culprit in the initialization sequence seems to be the write to MBCTL added in the above mentioned commit. The first version of this patch just held a forcewake reference across the clock gating init functions, which seems to have been enought to gather quite a few positive test reports. But since that smelled a bit like ad-hoc duct-tape v2 now just disables rps/rc6 across the entire hw setup. References: https://bugs.freedesktop.org/show_bug.cgi?id=54089 References: https://bugzilla.kernel.org/show_bug.cgi?id=58971 References: https://patchwork.kernel.org/patch/2827634/ (patch v1) Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Add note about v1 vs. v2 of this patch and use standard layout for the commit citation. Also add the tested-bys from v1 and a cc: stable.] Cc: stable@vger.kernel.org (Note: tiny conflict due to the addition of the backlight lock in 3.11) Tested-by: Alexander Kaltsas <alexkaltsas@gmail.com> (v1) Tested-by: rocko <rockorequin@hotmail.com> (v1) Tested-by: JohnMB <johnmbryant@sky.com> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-17 06:22:58 +00:00
spin_lock_init(&dev_priv->irq_lock);
spin_lock_init(&dev_priv->gpu_error.lock);
spin_lock_init(&dev_priv->backlight.lock);
spin_lock_init(&dev_priv->uncore.lock);
spin_lock_init(&dev_priv->mm.object_stat_lock);
drm/i915: fix long-standing SNB regression in power consumption after resume v2 This patch fixes regression in power consumtion of sandy bridge gpu, which exists since v3.6 Sometimes after resuming from s2ram gpu starts thinking that it's extremely busy. After that it never reaches rc6 state. Bug exists since kernel v3.6: commit b4ae3f22d238617ca11610b29fde16cf8c0bc6e0 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Jun 14 11:04:48 2012 -0700 drm/i915: load boot context at driver init time For some reason RC6 is already enabled at the beginning of resuming process. Following initliaztion breaks some internal state and confuses RPS engine. This patch disables RC6 at the beginnig of resume and initialization. I've rearranged initialization sequence, because intel_disable_gt_powersave() needs initialized force_wake_get/put and some locks from the dev_priv. Note: The culprit in the initialization sequence seems to be the write to MBCTL added in the above mentioned commit. The first version of this patch just held a forcewake reference across the clock gating init functions, which seems to have been enought to gather quite a few positive test reports. But since that smelled a bit like ad-hoc duct-tape v2 now just disables rps/rc6 across the entire hw setup. References: https://bugs.freedesktop.org/show_bug.cgi?id=54089 References: https://bugzilla.kernel.org/show_bug.cgi?id=58971 References: https://patchwork.kernel.org/patch/2827634/ (patch v1) Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> [danvet: Add note about v1 vs. v2 of this patch and use standard layout for the commit citation. Also add the tested-bys from v1 and a cc: stable.] Cc: stable@vger.kernel.org (Note: tiny conflict due to the addition of the backlight lock in 3.11) Tested-by: Alexander Kaltsas <alexkaltsas@gmail.com> (v1) Tested-by: rocko <rockorequin@hotmail.com> (v1) Tested-by: JohnMB <johnmbryant@sky.com> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-17 06:22:58 +00:00
mutex_init(&dev_priv->dpio_lock);
mutex_init(&dev_priv->rps.hw_lock);
mutex_init(&dev_priv->modeset_restore_lock);
i915_dump_device_info(dev_priv);
if (i915_get_bridge_dev(dev)) {
ret = -EIO;
goto free_priv;
}
mmio_bar = IS_GEN2(dev) ? 1 : 0;
/* Before gen4, the registers and the GTT are behind different BARs.
* However, from gen4 onwards, the registers and the GTT are shared
* in the same BAR, so we want to restrict this ioremap from
* clobbering the GTT which we want ioremap_wc instead. Fortunately,
* the register BAR remains the same size for all the earlier
* generations up to Ironlake.
*/
if (info->gen < 5)
mmio_size = 512*1024;
else
mmio_size = 2*1024*1024;
dev_priv->regs = pci_iomap(dev->pdev, mmio_bar, mmio_size);
if (!dev_priv->regs) {
DRM_ERROR("failed to map registers\n");
ret = -EIO;
goto put_bridge;
}
intel_uncore_early_sanitize(dev);
if (IS_HASWELL(dev) && (I915_READ(HSW_EDRAM_PRESENT) == 1)) {
/* The docs do not explain exactly how the calculation can be
* made. It is somewhat guessable, but for now, it's always
* 128MB.
* NB: We can't write IDICR yet because we do not have gt funcs
* set up */
dev_priv->ellc_size = 128;
DRM_INFO("Found %zuMB of eLLC\n", dev_priv->ellc_size);
}
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-04 17:21:27 +00:00
ret = i915_gem_gtt_init(dev);
if (ret)
goto put_bridge;
if (drm_core_check_feature(dev, DRIVER_MODESET))
i915_kick_out_firmware_fb(dev_priv);
pci_set_master(dev->pdev);
/* overlay on gen2 is broken and can't address above 1G */
if (IS_GEN2(dev))
dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(30));
/* 965GM sometimes incorrectly writes to hardware status page (HWS)
* using 32bit addressing, overwriting memory if HWS is located
* above 4GB.
*
* The documentation also mentions an issue with undefined
* behaviour if any general state is accessed within a page above 4GB,
* which also needs to be handled carefully.
*/
if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
dma_set_coherent_mask(&dev->pdev->dev, DMA_BIT_MASK(32));
aperture_size = dev_priv->gtt.mappable_end;
dev_priv->gtt.mappable =
io_mapping_create_wc(dev_priv->gtt.mappable_base,
aperture_size);
if (dev_priv->gtt.mappable == NULL) {
ret = -EIO;
goto out_rmmap;
}
dev_priv->gtt.mtrr = arch_phys_wc_add(dev_priv->gtt.mappable_base,
aperture_size);
/* The i915 workqueue is primarily used for batched retirement of
* requests (and thus managing bo) once the task has been completed
* by the GPU. i915_gem_retire_requests() is called directly when we
* need high-priority retirement, such as waiting for an explicit
* bo.
*
* It is also used for periodic low-priority events, such as
* idle-timers and recording error state.
*
* All tasks on the workqueue are expected to acquire the dev mutex
* so there is no point in running more than one instance of the
* workqueue at any time. Use an ordered one.
*/
dev_priv->wq = alloc_ordered_workqueue("i915", 0);
if (dev_priv->wq == NULL) {
DRM_ERROR("Failed to create our workqueue.\n");
ret = -ENOMEM;
goto out_mtrrfree;
}
/* This must be called before any calls to HAS_PCH_* */
intel_detect_pch(dev);
intel_irq_init(dev);
intel_pm_init(dev);
intel_uncore_sanitize(dev);
intel_uncore_init(dev);
/* Try to make sure MCHBAR is enabled before poking at it */
intel_setup_mchbar(dev);
intel_setup_gmbus(dev);
intel_opregion_setup(dev);
intel_setup_bios(dev);
i915_gem_load(dev);
/* On the 945G/GM, the chipset reports the MSI capability on the
* integrated graphics even though the support isn't actually there
* according to the published specs. It doesn't appear to function
* correctly in testing on 945G.
* This may be a side effect of MSI having been made available for PEG
* and the registers being closely associated.
*
* According to chipset errata, on the 965GM, MSI interrupts may
* be lost or delayed, but we use them anyways to avoid
* stuck interrupts on some machines.
*/
if (!IS_I945G(dev) && !IS_I945GM(dev))
pci_enable_msi(dev->pdev);
dev_priv->num_plane = 1;
if (IS_VALLEYVIEW(dev))
dev_priv->num_plane = 2;
if (INTEL_INFO(dev)->num_pipes) {
ret = drm_vblank_init(dev, INTEL_INFO(dev)->num_pipes);
if (ret)
goto out_gem_unload;
}
if (HAS_POWER_WELL(dev))
i915_init_power_well(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = i915_load_modeset_init(dev);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_gem_unload;
}
} else {
/* Start out suspended in ums mode. */
dev_priv->ums.mm_suspended = 1;
}
drm/i915: rc6 in sysfs Merge rc6 information into the power group for our device. Until now the i915 driver has not had any sysfs entries (aside from the connector stuff enabled by drm core). Since it seems like we're likely to have more in the future I created a new file for sysfs stubs, as well as the rc6 sysfs functions which don't really belong elsewhere (perhaps i915_suspend, but most of the stuff is in intel_display,c). displays rc6 modes enabled (as a hex mask): cat /sys/class/drm/card0/power/rc6_enable displays #ms GPU has been in rc6 since boot: cat /sys/class/drm/card0/power/rc6_residency_ms displays #ms GPU has been in deep rc6 since boot: cat /sys/class/drm/card0/power/rc6p_residency_ms displays #ms GPU has been in deepest rc6 since boot: cat /sys/class/drm/card0/power/rc6pp_residency_ms Important note: I've seen on SNB that even when RC6 is *not* enabled the rc6 register seems to have a random value in it. I can only guess at the reason reason for this. Those writing tools that utilize this value need to be careful and probably want to scrutinize the value very carefully. v2: use common rc6 residency units to milliseconds for the other RC6 types v3: don't create sysfs files for GEN <= 5 add a rc6_enable to show a mask of enabled rc6 types use unmerge instead of remove for sysfs group squash intel_enable_rc6() extraction into this patch v4: rename sysfs files (Chris) CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch>f CC: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: squash in the 64bit division fix by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-11 04:17:01 +00:00
i915_setup_sysfs(dev);
if (INTEL_INFO(dev)->num_pipes) {
/* Must be done after probing outputs */
intel_opregion_init(dev);
ACPI / video / i915: No ACPI backlight if firmware expects Windows 8 According to Matthew Garrett, "Windows 8 leaves backlight control up to individual graphics drivers rather than making ACPI calls itself. There's plenty of evidence to suggest that the Intel driver for Windows [8] doesn't use the ACPI interface, including the fact that it's broken on a bunch of machines when the OS claims to support Windows 8. The simplest thing to do appears to be to disable the ACPI backlight interface on these systems". There's a problem with that approach, however, because simply avoiding to register the ACPI backlight interface if the firmware calls _OSI for Windows 8 may not work in the following situations: (1) The ACPI backlight interface actually works on the given system and the i915 driver is not loaded (e.g. another graphics driver is used). (2) The ACPI backlight interface doesn't work on the given system, but there is a vendor platform driver that will register its own, equally broken, backlight interface if not prevented from doing so by the ACPI subsystem. Therefore we need to allow the ACPI backlight interface to be registered until the i915 driver is loaded which then will unregister it if the firmware has called _OSI for Windows 8 (or will register the ACPI video driver without backlight support if not already present). For this reason, introduce an alternative function for registering ACPI video, acpi_video_register_with_quirks(), that will check whether or not the ACPI video driver has already been registered and whether or not the backlight Windows 8 quirk has to be applied. If the quirk has to be applied, it will block the ACPI backlight support and either unregister the backlight interface if the ACPI video driver has already been registered, or register the ACPI video driver without the backlight interface otherwise. Make the i915 driver use acpi_video_register_with_quirks() instead of acpi_video_register() in i915_driver_load(). This change is based on earlier patches from Matthew Garrett, Chun-Yi Lee and Seth Forshee and includes a fix from Aaron Lu's. References: https://bugzilla.kernel.org/show_bug.cgi?id=51231 Tested-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-07-18 00:08:06 +00:00
acpi_video_register_with_quirks();
}
if (IS_GEN5(dev))
intel_gpu_ips_init(dev_priv);
return 0;
out_gem_unload:
if (dev_priv->mm.inactive_shrinker.shrink)
unregister_shrinker(&dev_priv->mm.inactive_shrinker);
if (dev->pdev->msi_enabled)
pci_disable_msi(dev->pdev);
intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
destroy_workqueue(dev_priv->wq);
out_mtrrfree:
arch_phys_wc_del(dev_priv->gtt.mtrr);
io_mapping_free(dev_priv->gtt.mappable);
dev_priv->gtt.base.cleanup(&dev_priv->gtt.base);
out_rmmap:
pci_iounmap(dev->pdev, dev_priv->regs);
put_bridge:
pci_dev_put(dev_priv->bridge_dev);
free_priv:
kfree(dev_priv);
return ret;
}
int i915_driver_unload(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
intel_gpu_ips_teardown();
if (HAS_POWER_WELL(dev))
i915_remove_power_well(dev);
drm/i915: rc6 in sysfs Merge rc6 information into the power group for our device. Until now the i915 driver has not had any sysfs entries (aside from the connector stuff enabled by drm core). Since it seems like we're likely to have more in the future I created a new file for sysfs stubs, as well as the rc6 sysfs functions which don't really belong elsewhere (perhaps i915_suspend, but most of the stuff is in intel_display,c). displays rc6 modes enabled (as a hex mask): cat /sys/class/drm/card0/power/rc6_enable displays #ms GPU has been in rc6 since boot: cat /sys/class/drm/card0/power/rc6_residency_ms displays #ms GPU has been in deep rc6 since boot: cat /sys/class/drm/card0/power/rc6p_residency_ms displays #ms GPU has been in deepest rc6 since boot: cat /sys/class/drm/card0/power/rc6pp_residency_ms Important note: I've seen on SNB that even when RC6 is *not* enabled the rc6 register seems to have a random value in it. I can only guess at the reason reason for this. Those writing tools that utilize this value need to be careful and probably want to scrutinize the value very carefully. v2: use common rc6 residency units to milliseconds for the other RC6 types v3: don't create sysfs files for GEN <= 5 add a rc6_enable to show a mask of enabled rc6 types use unmerge instead of remove for sysfs group squash intel_enable_rc6() extraction into this patch v4: rename sysfs files (Chris) CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch>f CC: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: squash in the 64bit division fix by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-11 04:17:01 +00:00
i915_teardown_sysfs(dev);
if (dev_priv->mm.inactive_shrinker.shrink)
unregister_shrinker(&dev_priv->mm.inactive_shrinker);
mutex_lock(&dev->struct_mutex);
ret = i915_gpu_idle(dev);
if (ret)
DRM_ERROR("failed to idle hardware: %d\n", ret);
i915_gem_retire_requests(dev);
mutex_unlock(&dev->struct_mutex);
/* Cancel the retire work handler, which should be idle now. */
cancel_delayed_work_sync(&dev_priv->mm.retire_work);
io_mapping_free(dev_priv->gtt.mappable);
arch_phys_wc_del(dev_priv->gtt.mtrr);
acpi_video_unregister();
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_fbdev_fini(dev);
intel_modeset_cleanup(dev);
cancel_work_sync(&dev_priv->console_resume_work);
/*
* free the memory space allocated for the child device
* config parsed from VBT
*/
if (dev_priv->vbt.child_dev && dev_priv->vbt.child_dev_num) {
kfree(dev_priv->vbt.child_dev);
dev_priv->vbt.child_dev = NULL;
dev_priv->vbt.child_dev_num = 0;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
vga_switcheroo_unregister_client(dev->pdev);
vga_client_register(dev->pdev, NULL, NULL, NULL);
}
/* Free error state after interrupts are fully disabled. */
del_timer_sync(&dev_priv->gpu_error.hangcheck_timer);
cancel_work_sync(&dev_priv->gpu_error.work);
i915_destroy_error_state(dev);
if (dev->pdev->msi_enabled)
pci_disable_msi(dev->pdev);
intel_opregion_fini(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
/* Flush any outstanding unpin_work. */
flush_workqueue(dev_priv->wq);
mutex_lock(&dev->struct_mutex);
i915_gem_free_all_phys_object(dev);
i915_gem_cleanup_ringbuffer(dev);
i915_gem_context_fini(dev);
mutex_unlock(&dev->struct_mutex);
i915_gem_cleanup_aliasing_ppgtt(dev);
i915_gem_cleanup_stolen(dev);
if (!I915_NEED_GFX_HWS(dev))
i915_free_hws(dev);
}
list_del(&dev_priv->gtt.base.global_link);
WARN_ON(!list_empty(&dev_priv->vm_list));
drm_mm_takedown(&dev_priv->gtt.base.mm);
if (dev_priv->regs != NULL)
pci_iounmap(dev->pdev, dev_priv->regs);
intel_teardown_gmbus(dev);
intel_teardown_mchbar(dev);
destroy_workqueue(dev_priv->wq);
drm/i915: irq-drive the dp aux communication At least on the platforms that have a dp aux irq and also have it enabled - vlvhsw should have one, too. But I don't have a machine to test this on. Judging from docs there's no dp aux interrupt for gm45. Also, I only have an ivb cpu edp machine, so the dp aux A code for snb/ilk is untested. For dpcd probing when nothing is connected it slashes about 5ms of cpu time (cpu time is now negligible), which agrees with 3 * 5 400 usec timeouts. A previous version of this patch increases the time required to go through the dp_detect cycle (which includes reading the edid) from around 33 ms to around 40 ms. Experiments indicated that this is purely due to the irq latency - the hw doesn't allow us to queue up dp aux transactions and hence irq latency directly affects throughput. gmbus is much better, there we have a 8 byte buffer, and we get the irq once another 4 bytes can be queued up. But by using the pm_qos interface to request the lowest possible cpu wake-up latency this slowdown completely disappeared. Since all our output detection logic is single-threaded with the mode_config mutex right now anyway, I've decide not ot play fancy and to just reuse the gmbus wait queue. But this would definitely prep the way to run dp detection on different ports in parallel v2: Add a timeout for dp aux transfers when using interrupts - the hw _does_ prevent this with the hw-based 400 usec timeout, but if the irq somehow doesn't arrive we're screwed. Lesson learned while developing this ;-) v3: While at it also convert the busy-loop to wait_for_atomic, so that we don't run the risk of an infinite loop any more. v4: Ensure we have the smallest possible irq latency by using the pm_qos interface. v5: Add a comment to the code to explain why we frob pm_qos. Suggested by Chris Wilson. v6: Disable dp irq for vlv, that's easier than trying to get at docs and hw. v7: Squash in a fix for Haswell that Paulo Zanoni tracked down - the dp aux registers aren't at a fixed offset any more, but can be on the PCH while the DP port is on the cpu die. Reviewed-by: Imre Deak <imre.deak@intel.com> (v6) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-01 12:53:48 +00:00
pm_qos_remove_request(&dev_priv->pm_qos);
dev_priv->gtt.base.cleanup(&dev_priv->gtt.base);
if (dev_priv->slab)
kmem_cache_destroy(dev_priv->slab);
pci_dev_put(dev_priv->bridge_dev);
kfree(dev->dev_private);
return 0;
}
int i915_driver_open(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv;
DRM_DEBUG_DRIVER("\n");
file_priv = kzalloc(sizeof(*file_priv), GFP_KERNEL);
if (!file_priv)
return -ENOMEM;
file->driver_priv = file_priv;
spin_lock_init(&file_priv->mm.lock);
INIT_LIST_HEAD(&file_priv->mm.request_list);
idr_init(&file_priv->context_idr);
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
return 0;
}
/**
* i915_driver_lastclose - clean up after all DRM clients have exited
* @dev: DRM device
*
* Take care of cleaning up after all DRM clients have exited. In the
* mode setting case, we want to restore the kernel's initial mode (just
* in case the last client left us in a bad state).
*
* Additionally, in the non-mode setting case, we'll tear down the GTT
* and DMA structures, since the kernel won't be using them, and clea
* up any GEM state.
*/
void i915_driver_lastclose(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
/* On gen6+ we refuse to init without kms enabled, but then the drm core
* goes right around and calls lastclose. Check for this and don't clean
* up anything. */
if (!dev_priv)
return;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_fb_restore_mode(dev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
vga_switcheroo_process_delayed_switch();
return;
}
i915_gem_lastclose(dev);
i915_dma_cleanup(dev);
}
void i915_driver_preclose(struct drm_device * dev, struct drm_file *file_priv)
{
drm/i915: preliminary context support Very basic code for context setup/destruction in the driver. Adds the file i915_gem_context.c This file implements HW context support. On gen5+ a HW context consists of an opaque GPU object which is referenced at times of context saves and restores. With RC6 enabled, the context is also referenced as the GPU enters and exists from RC6 (GPU has it's own internal power context, except on gen5). Though something like a context does exist for the media ring, the code only supports contexts for the render ring. In software, there is a distinction between contexts created by the user, and the default HW context. The default HW context is used by GPU clients that do not request setup of their own hardware context. The default context's state is never restored to help prevent programming errors. This would happen if a client ran and piggy-backed off another clients GPU state. The default context only exists to give the GPU some offset to load as the current to invoke a save of the context we actually care about. In fact, the code could likely be constructed, albeit in a more complicated fashion, to never use the default context, though that limits the driver's ability to swap out, and/or destroy other contexts. All other contexts are created as a request by the GPU client. These contexts store GPU state, and thus allow GPU clients to not re-emit state (and potentially query certain state) at any time. The kernel driver makes certain that the appropriate commands are inserted. There are 4 entry points into the contexts, init, fini, open, close. The names are self-explanatory except that init can be called during reset, and also during pm thaw/resume. As we expect our context to be preserved across these events, we do not reinitialize in this case. As Adam Jackson pointed out, The cutoff of 1MB where a HW context is considered too big is arbitrary. The reason for this is even though context sizes are increasing with every generation, they have yet to eclipse even 32k. If we somehow read back way more than that, it probably means BIOS has done something strange, or we're running on a platform that wasn't designed for this. v2: rename load/unload to init/fini (daniel) remove ILK support for get_size() (indirectly daniel) add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel) added comments (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
i915_gem_context_close(dev, file_priv);
i915_gem_release(dev, file_priv);
}
void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
{
struct drm_i915_file_private *file_priv = file->driver_priv;
kfree(file_priv);
}
struct drm_ioctl_desc i915_ioctls[] = {
DRM_IOCTL_DEF_DRV(I915_INIT, i915_dma_init, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_FLUSH, i915_flush_ioctl, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_FLIP, i915_flip_bufs, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, i915_batchbuffer, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, i915_irq_emit, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, i915_irq_wait, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_SETPARAM, i915_setparam, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, i915_cmdbuffer, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH),
DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF_DRV(I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, intel_sprite_get_colorkey, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
drm/i915: wait render timeout ioctl This helps implement GL_ARB_sync but stops short of allowing full blown sync objects. Finally we can use the new timed seqno waiting function to allow userspace to wait on a buffer object with a timeout. This implements that interface. The IOCTL will take as input a buffer object handle, and a timeout in nanoseconds (flags is currently optional but will likely be used for permutations of flush operations). Users may specify 0 nanoseconds to instantly check. The wait ioctl with a timeout of 0 reimplements the busy ioctl. With any non-zero timeout parameter the wait ioctl will wait for the given number of nanoseconds on an object becoming unbusy. Since the wait itself does so holding struct_mutex the object may become re-busied before this completes. A similar but shorter race condition exists in the busy ioctl. v2: ETIME/ERESTARTSYS instead of changing to EBUSY, and EGAIN (Chris) Flush the object from the gpu write domain (Chris + Daniel) Fix leaked refcount in good case (Chris) Naturally align ioctl struct (Chris) v3: Drop lock after getting seqno to avoid ugly dance (Chris) v4: check for 0 timeout after olr check to allow polling (Chris) v5: Updated the comment. (Chris) v6: Return -ETIME instead of -EBUSY when timeout_ns is 0 (Daniel) Fix the commit message comment to be less ugly (Ben) Add a warning to check the return timespec (Ben) v7: Use DRM_AUTH for the ioctl. (Eugeni) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-05-24 22:03:10 +00:00
DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_UNLOCKED),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
/*
* This is really ugly: Because old userspace abused the linux agp interface to
* manage the gtt, we need to claim that all intel devices are agp. For
* otherwise the drm core refuses to initialize the agp support code.
*/
int i915_driver_device_is_agp(struct drm_device * dev)
{
return 1;
}