linux/kernel/time/tick-sched.h

106 lines
3.5 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _TICK_SCHED_H
#define _TICK_SCHED_H
#include <linux/hrtimer.h>
enum tick_device_mode {
TICKDEV_MODE_PERIODIC,
TICKDEV_MODE_ONESHOT,
};
struct tick_device {
struct clock_event_device *evtdev;
enum tick_device_mode mode;
};
enum tick_nohz_mode {
NOHZ_MODE_INACTIVE,
NOHZ_MODE_LOWRES,
NOHZ_MODE_HIGHRES,
};
/**
* struct tick_sched - sched tick emulation and no idle tick control/stats
* @sched_timer: hrtimer to schedule the periodic tick in high
* resolution mode
* @check_clocks: Notification mechanism about clocksource changes
* @nohz_mode: Mode - one state of tick_nohz_mode
* @inidle: Indicator that the CPU is in the tick idle mode
* @tick_stopped: Indicator that the idle tick has been stopped
* @idle_active: Indicator that the CPU is actively in the tick idle mode;
* it is reset during irq handling phases.
* @do_timer_lst: CPU was the last one doing do_timer before going idle
* @got_idle_tick: Tick timer function has run with @inidle set
* @last_tick: Store the last tick expiry time when the tick
* timer is modified for nohz sleeps. This is necessary
* to resume the tick timer operation in the timeline
* when the CPU returns from nohz sleep.
nohz: Fix collision between tick and other hrtimers, again This restores commit: 24b91e360ef5: ("nohz: Fix collision between tick and other hrtimers") ... which got reverted by commit: 558e8e27e73f: ('Revert "nohz: Fix collision between tick and other hrtimers"') ... due to a regression where CPUs spuriously stopped ticking. The bug happened when a tick fired too early past its expected expiration: on IRQ exit the tick was scheduled again to the same deadline but skipped reprogramming because ts->next_tick still kept in cache the deadline. This has been fixed now with resetting ts->next_tick from the tick itself. Extra care has also been taken to prevent from obsolete values throughout CPU hotplug operations. When the tick is stopped and an interrupt occurs afterward, we check on that interrupt exit if the next tick needs to be rescheduled. If it doesn't need any update, we don't want to do anything. In order to check if the tick needs an update, we compare it against the clockevent device deadline. Now that's a problem because the clockevent device is at a lower level than the tick itself if it is implemented on top of hrtimer. Every hrtimer share this clockevent device. So comparing the next tick deadline against the clockevent device deadline is wrong because the device may be programmed for another hrtimer whose deadline collides with the tick. As a result we may end up not reprogramming the tick accidentally. In a worst case scenario under full dynticks mode, the tick stops firing as it is supposed to every 1hz, leaving /proc/stat stalled: Task in a full dynticks CPU ---------------------------- * hrtimer A is queued 2 seconds ahead * the tick is stopped, scheduled 1 second ahead * tick fires 1 second later * on tick exit, nohz schedules the tick 1 second ahead but sees the clockevent device is already programmed to that deadline, fooled by hrtimer A, the tick isn't rescheduled. * hrtimer A is cancelled before its deadline * tick never fires again until an interrupt happens... In order to fix this, store the next tick deadline to the tick_sched local structure and reuse that value later to check whether we need to reprogram the clock after an interrupt. On the other hand, ts->sleep_length still wants to know about the next clock event and not just the tick, so we want to improve the related comment to avoid confusion. Reported-and-tested-by: Tim Wright <tim@binbash.co.uk> Reported-and-tested-by: Pavel Machek <pavel@ucw.cz> Reported-by: James Hartsock <hartsjc@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1492783255-5051-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-21 14:00:54 +00:00
* @next_tick: Next tick to be fired when in dynticks mode.
* @idle_jiffies: jiffies at the entry to idle for idle time accounting
* @idle_calls: Total number of idle calls
* @idle_sleeps: Number of idle calls, where the sched tick was stopped
* @idle_entrytime: Time when the idle call was entered
* @idle_waketime: Time when the idle was interrupted
* @idle_exittime: Time when the idle state was left
* @idle_sleeptime: Sum of the time slept in idle with sched tick stopped
* @iowait_sleeptime: Sum of the time slept in idle with sched tick stopped, with IO outstanding
* @timer_expires: Anticipated timer expiration time (in case sched tick is stopped)
* @timer_expires_base: Base time clock monotonic for @timer_expires
* @next_timer: Expiry time of next expiring timer for debugging purpose only
* @tick_dep_mask: Tick dependency mask - is set, if someone needs the tick
* @last_tick_jiffies: Value of jiffies seen on last tick
* @stalled_jiffies: Number of stalled jiffies detected across ticks
*/
struct tick_sched {
struct hrtimer sched_timer;
unsigned long check_clocks;
enum tick_nohz_mode nohz_mode;
unsigned int inidle : 1;
unsigned int tick_stopped : 1;
unsigned int idle_active : 1;
unsigned int do_timer_last : 1;
unsigned int got_idle_tick : 1;
ktime_t last_tick;
nohz: Fix collision between tick and other hrtimers, again This restores commit: 24b91e360ef5: ("nohz: Fix collision between tick and other hrtimers") ... which got reverted by commit: 558e8e27e73f: ('Revert "nohz: Fix collision between tick and other hrtimers"') ... due to a regression where CPUs spuriously stopped ticking. The bug happened when a tick fired too early past its expected expiration: on IRQ exit the tick was scheduled again to the same deadline but skipped reprogramming because ts->next_tick still kept in cache the deadline. This has been fixed now with resetting ts->next_tick from the tick itself. Extra care has also been taken to prevent from obsolete values throughout CPU hotplug operations. When the tick is stopped and an interrupt occurs afterward, we check on that interrupt exit if the next tick needs to be rescheduled. If it doesn't need any update, we don't want to do anything. In order to check if the tick needs an update, we compare it against the clockevent device deadline. Now that's a problem because the clockevent device is at a lower level than the tick itself if it is implemented on top of hrtimer. Every hrtimer share this clockevent device. So comparing the next tick deadline against the clockevent device deadline is wrong because the device may be programmed for another hrtimer whose deadline collides with the tick. As a result we may end up not reprogramming the tick accidentally. In a worst case scenario under full dynticks mode, the tick stops firing as it is supposed to every 1hz, leaving /proc/stat stalled: Task in a full dynticks CPU ---------------------------- * hrtimer A is queued 2 seconds ahead * the tick is stopped, scheduled 1 second ahead * tick fires 1 second later * on tick exit, nohz schedules the tick 1 second ahead but sees the clockevent device is already programmed to that deadline, fooled by hrtimer A, the tick isn't rescheduled. * hrtimer A is cancelled before its deadline * tick never fires again until an interrupt happens... In order to fix this, store the next tick deadline to the tick_sched local structure and reuse that value later to check whether we need to reprogram the clock after an interrupt. On the other hand, ts->sleep_length still wants to know about the next clock event and not just the tick, so we want to improve the related comment to avoid confusion. Reported-and-tested-by: Tim Wright <tim@binbash.co.uk> Reported-and-tested-by: Pavel Machek <pavel@ucw.cz> Reported-by: James Hartsock <hartsjc@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1492783255-5051-2-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-21 14:00:54 +00:00
ktime_t next_tick;
unsigned long idle_jiffies;
unsigned long idle_calls;
unsigned long idle_sleeps;
ktime_t idle_entrytime;
ktime_t idle_waketime;
ktime_t idle_exittime;
ktime_t idle_sleeptime;
ktime_t iowait_sleeptime;
unsigned long last_jiffies;
u64 timer_expires;
u64 timer_expires_base;
u64 next_timer;
ktime_t idle_expires;
atomic_t tick_dep_mask;
unsigned long last_tick_jiffies;
unsigned int stalled_jiffies;
};
extern struct tick_sched *tick_get_tick_sched(int cpu);
extern void tick_setup_sched_timer(void);
#if defined CONFIG_NO_HZ_COMMON || defined CONFIG_HIGH_RES_TIMERS
extern void tick_cancel_sched_timer(int cpu);
#else
static inline void tick_cancel_sched_timer(int cpu) { }
#endif
tick/broadcast: Make idle check independent from mode and config Currently the broadcast busy check, which prevents the idle code from going into deep idle, works only in one shot mode. If NOHZ and HIGHRES are off (config or command line) there is no sanity check at all, so under certain conditions cpus are allowed to go into deep idle, where the local timer stops, and are not woken up again because there is no broadcast timer installed or a hrtimer based broadcast device is not evaluated. Move tick_broadcast_oneshot_control() into the common code and provide proper subfunctions for the various config combinations. The common check in tick_broadcast_oneshot_control() is for the C3STOP misfeature flag of the local clock event device. If its not set, idle can proceed. If set, further checks are necessary. Provide checks for the trivial cases: - If broadcast is disabled in the config, then return busy - If oneshot mode (NOHZ/HIGHES) is disabled in the config, return busy if the broadcast device is hrtimer based. - If oneshot mode is enabled in the config call the original tick_broadcast_oneshot_control() function. That function needs extra checks which will be implemented in seperate patches. [ Split out from a larger combo patch ] Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Suzuki Poulose <Suzuki.Poulose@arm.com> Cc: Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com> Cc: Catalin Marinas <Catalin.Marinas@arm.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1507070929360.3916@nanos
2015-07-07 14:29:38 +00:00
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
extern int __tick_broadcast_oneshot_control(enum tick_broadcast_state state);
#else
static inline int
__tick_broadcast_oneshot_control(enum tick_broadcast_state state)
{
return -EBUSY;
}
#endif
#endif