linux/drivers/net/wireless/ath/ath9k/ath9k.h

696 lines
20 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008-2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef ATH9K_H
#define ATH9K_H
#include <linux/etherdevice.h>
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/completion.h>
#include "debug.h"
#include "common.h"
/*
* Header for the ath9k.ko driver core *only* -- hw code nor any other driver
* should rely on this file or its contents.
*/
struct ath_node;
/* Macro to expand scalars to 64-bit objects */
#define ito64(x) (sizeof(x) == 1) ? \
(((unsigned long long int)(x)) & (0xff)) : \
(sizeof(x) == 2) ? \
(((unsigned long long int)(x)) & 0xffff) : \
((sizeof(x) == 4) ? \
(((unsigned long long int)(x)) & 0xffffffff) : \
(unsigned long long int)(x))
/* increment with wrap-around */
#define INCR(_l, _sz) do { \
(_l)++; \
(_l) &= ((_sz) - 1); \
} while (0)
/* decrement with wrap-around */
#define DECR(_l, _sz) do { \
(_l)--; \
(_l) &= ((_sz) - 1); \
} while (0)
#define A_MAX(a, b) ((a) > (b) ? (a) : (b))
#define TSF_TO_TU(_h,_l) \
((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
#define ATH_TXQ_SETUP(sc, i) ((sc)->tx.txqsetup & (1<<i))
struct ath_config {
u32 ath_aggr_prot;
u16 txpowlimit;
u8 cabqReadytime;
};
/*************************/
/* Descriptor Management */
/*************************/
#define ATH_TXBUF_RESET(_bf) do { \
(_bf)->bf_stale = false; \
(_bf)->bf_lastbf = NULL; \
(_bf)->bf_next = NULL; \
memset(&((_bf)->bf_state), 0, \
sizeof(struct ath_buf_state)); \
} while (0)
#define ATH_RXBUF_RESET(_bf) do { \
(_bf)->bf_stale = false; \
} while (0)
/**
* enum buffer_type - Buffer type flags
*
* @BUF_HT: Send this buffer using HT capabilities
* @BUF_AMPDU: This buffer is an ampdu, as part of an aggregate (during TX)
* @BUF_AGGR: Indicates whether the buffer can be aggregated
* (used in aggregation scheduling)
* @BUF_RETRY: Indicates whether the buffer is retried
* @BUF_XRETRY: To denote excessive retries of the buffer
*/
enum buffer_type {
BUF_HT = BIT(1),
BUF_AMPDU = BIT(2),
BUF_AGGR = BIT(3),
BUF_RETRY = BIT(4),
BUF_XRETRY = BIT(5),
};
#define bf_nframes bf_state.bfs_nframes
#define bf_al bf_state.bfs_al
#define bf_frmlen bf_state.bfs_frmlen
#define bf_retries bf_state.bfs_retries
#define bf_seqno bf_state.bfs_seqno
#define bf_tidno bf_state.bfs_tidno
#define bf_keyix bf_state.bfs_keyix
#define bf_keytype bf_state.bfs_keytype
#define bf_isht(bf) (bf->bf_state.bf_type & BUF_HT)
#define bf_isampdu(bf) (bf->bf_state.bf_type & BUF_AMPDU)
#define bf_isaggr(bf) (bf->bf_state.bf_type & BUF_AGGR)
#define bf_isretried(bf) (bf->bf_state.bf_type & BUF_RETRY)
#define bf_isxretried(bf) (bf->bf_state.bf_type & BUF_XRETRY)
#define ATH_TXSTATUS_RING_SIZE 64
struct ath_descdma {
void *dd_desc;
dma_addr_t dd_desc_paddr;
u32 dd_desc_len;
struct ath_buf *dd_bufptr;
};
int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
struct list_head *head, const char *name,
int nbuf, int ndesc, bool is_tx);
void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
struct list_head *head);
/***********/
/* RX / TX */
/***********/
#define ATH_MAX_ANTENNA 3
#define ATH_RXBUF 512
#define ATH_TXBUF 512
#define ATH_TXBUF_RESERVE 5
#define ATH_MAX_QDEPTH (ATH_TXBUF / 4 - ATH_TXBUF_RESERVE)
#define ATH_TXMAXTRY 13
#define ATH_MGT_TXMAXTRY 4
#define TID_TO_WME_AC(_tid) \
((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE : \
(((_tid) == 1) || ((_tid) == 2)) ? WME_AC_BK : \
(((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI : \
WME_AC_VO)
#define ADDBA_EXCHANGE_ATTEMPTS 10
#define ATH_AGGR_DELIM_SZ 4
#define ATH_AGGR_MINPLEN 256 /* in bytes, minimum packet length */
/* number of delimiters for encryption padding */
#define ATH_AGGR_ENCRYPTDELIM 10
/* minimum h/w qdepth to be sustained to maximize aggregation */
#define ATH_AGGR_MIN_QDEPTH 2
#define ATH_AMPDU_SUBFRAME_DEFAULT 32
#define IEEE80211_SEQ_SEQ_SHIFT 4
#define IEEE80211_SEQ_MAX 4096
#define IEEE80211_WEP_IVLEN 3
#define IEEE80211_WEP_KIDLEN 1
#define IEEE80211_WEP_CRCLEN 4
#define IEEE80211_MAX_MPDU_LEN (3840 + FCS_LEN + \
(IEEE80211_WEP_IVLEN + \
IEEE80211_WEP_KIDLEN + \
IEEE80211_WEP_CRCLEN))
/* return whether a bit at index _n in bitmap _bm is set
* _sz is the size of the bitmap */
#define ATH_BA_ISSET(_bm, _n) (((_n) < (WME_BA_BMP_SIZE)) && \
((_bm)[(_n) >> 5] & (1 << ((_n) & 31))))
/* return block-ack bitmap index given sequence and starting sequence */
#define ATH_BA_INDEX(_st, _seq) (((_seq) - (_st)) & (IEEE80211_SEQ_MAX - 1))
/* returns delimiter padding required given the packet length */
#define ATH_AGGR_GET_NDELIM(_len) \
(((((_len) + ATH_AGGR_DELIM_SZ) < ATH_AGGR_MINPLEN) ? \
(ATH_AGGR_MINPLEN - (_len) - ATH_AGGR_DELIM_SZ) : 0) >> 2)
#define BAW_WITHIN(_start, _bawsz, _seqno) \
((((_seqno) - (_start)) & 4095) < (_bawsz))
#define ATH_AN_2_TID(_an, _tidno) (&(_an)->tid[(_tidno)])
#define ATH_TX_COMPLETE_POLL_INT 1000
enum ATH_AGGR_STATUS {
ATH_AGGR_DONE,
ATH_AGGR_BAW_CLOSED,
ATH_AGGR_LIMITED,
};
#define ATH_TXFIFO_DEPTH 8
struct ath_txq {
int axq_class;
u32 axq_qnum;
u32 *axq_link;
struct list_head axq_q;
spinlock_t axq_lock;
u32 axq_depth;
bool stopped;
bool axq_tx_inprogress;
struct list_head axq_acq;
struct list_head txq_fifo[ATH_TXFIFO_DEPTH];
struct list_head txq_fifo_pending;
u8 txq_headidx;
u8 txq_tailidx;
};
struct ath_atx_ac {
int sched;
int qnum;
struct list_head list;
struct list_head tid_q;
};
struct ath_buf_state {
int bfs_nframes;
u16 bfs_al;
u16 bfs_frmlen;
int bfs_seqno;
int bfs_tidno;
int bfs_retries;
u8 bf_type;
u8 bfs_paprd;
unsigned long bfs_paprd_timestamp;
u32 bfs_keyix;
enum ath9k_key_type bfs_keytype;
};
struct ath_buf {
struct list_head list;
struct ath_buf *bf_lastbf; /* last buf of this unit (a frame or
an aggregate) */
struct ath_buf *bf_next; /* next subframe in the aggregate */
struct sk_buff *bf_mpdu; /* enclosing frame structure */
void *bf_desc; /* virtual addr of desc */
dma_addr_t bf_daddr; /* physical addr of desc */
dma_addr_t bf_buf_addr; /* physical addr of data buffer */
bool bf_stale;
bool bf_isnullfunc;
bool bf_tx_aborted;
u16 bf_flags;
struct ath_buf_state bf_state;
dma_addr_t bf_dmacontext;
struct ath_wiphy *aphy;
};
struct ath_atx_tid {
struct list_head list;
struct list_head buf_q;
struct ath_node *an;
struct ath_atx_ac *ac;
struct ath_buf *tx_buf[ATH_TID_MAX_BUFS];
u16 seq_start;
u16 seq_next;
u16 baw_size;
int tidno;
int baw_head; /* first un-acked tx buffer */
int baw_tail; /* next unused tx buffer slot */
int sched;
int paused;
u8 state;
};
struct ath_node {
struct ath_common *common;
struct ath_atx_tid tid[WME_NUM_TID];
struct ath_atx_ac ac[WME_NUM_AC];
u16 maxampdu;
u8 mpdudensity;
int last_rssi;
};
#define AGGR_CLEANUP BIT(1)
#define AGGR_ADDBA_COMPLETE BIT(2)
#define AGGR_ADDBA_PROGRESS BIT(3)
struct ath_tx_control {
struct ath_txq *txq;
int if_id;
enum ath9k_internal_frame_type frame_type;
u8 paprd;
};
#define ATH_TX_ERROR 0x01
#define ATH_TX_XRETRY 0x02
#define ATH_TX_BAR 0x04
struct ath_tx {
u16 seq_no;
u32 txqsetup;
int hwq_map[WME_NUM_AC];
spinlock_t txbuflock;
struct list_head txbuf;
struct ath_txq txq[ATH9K_NUM_TX_QUEUES];
struct ath_descdma txdma;
int pending_frames[WME_NUM_AC];
};
struct ath_rx_edma {
struct sk_buff_head rx_fifo;
struct sk_buff_head rx_buffers;
u32 rx_fifo_hwsize;
};
struct ath_rx {
u8 defant;
u8 rxotherant;
u32 *rxlink;
unsigned int rxfilter;
spinlock_t rxflushlock;
spinlock_t rxbuflock;
struct list_head rxbuf;
struct ath_descdma rxdma;
struct ath_buf *rx_bufptr;
struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX];
};
int ath_startrecv(struct ath_softc *sc);
bool ath_stoprecv(struct ath_softc *sc);
void ath_flushrecv(struct ath_softc *sc);
u32 ath_calcrxfilter(struct ath_softc *sc);
int ath_rx_init(struct ath_softc *sc, int nbufs);
void ath_rx_cleanup(struct ath_softc *sc);
int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp);
struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype);
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq);
int ath_tx_setup(struct ath_softc *sc, int haltype);
void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
void ath_draintxq(struct ath_softc *sc,
struct ath_txq *txq, bool retry_tx);
void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an);
void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq);
int ath_tx_init(struct ath_softc *sc, int nbufs);
void ath_tx_cleanup(struct ath_softc *sc);
int ath_txq_update(struct ath_softc *sc, int qnum,
struct ath9k_tx_queue_info *q);
int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ath_tx_control *txctl);
void ath_tx_tasklet(struct ath_softc *sc);
void ath_tx_edma_tasklet(struct ath_softc *sc);
void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb);
bool ath_tx_aggr_check(struct ath_softc *sc, struct ath_node *an, u8 tidno);
void ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
u16 tid, u16 *ssn);
void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath9k_enable_ps(struct ath_softc *sc);
/********/
/* VIFs */
/********/
struct ath_vif {
int av_bslot;
__le64 tsf_adjust; /* TSF adjustment for staggered beacons */
enum nl80211_iftype av_opmode;
struct ath_buf *av_bcbuf;
struct ath_tx_control av_btxctl;
u8 bssid[ETH_ALEN]; /* current BSSID from config_interface */
};
/*******************/
/* Beacon Handling */
/*******************/
/*
* Regardless of the number of beacons we stagger, (i.e. regardless of the
* number of BSSIDs) if a given beacon does not go out even after waiting this
* number of beacon intervals, the game's up.
*/
#define BSTUCK_THRESH (9 * ATH_BCBUF)
#define ATH_BCBUF 4
#define ATH_DEFAULT_BINTVAL 100 /* TU */
#define ATH_DEFAULT_BMISS_LIMIT 10
#define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
struct ath_beacon_config {
u16 beacon_interval;
u16 listen_interval;
u16 dtim_period;
u16 bmiss_timeout;
u8 dtim_count;
};
struct ath_beacon {
enum {
OK, /* no change needed */
UPDATE, /* update pending */
COMMIT /* beacon sent, commit change */
} updateslot; /* slot time update fsm */
u32 beaconq;
u32 bmisscnt;
u32 ast_be_xmit;
u64 bc_tstamp;
struct ieee80211_vif *bslot[ATH_BCBUF];
struct ath_wiphy *bslot_aphy[ATH_BCBUF];
int slottime;
int slotupdate;
struct ath9k_tx_queue_info beacon_qi;
struct ath_descdma bdma;
struct ath_txq *cabq;
struct list_head bbuf;
};
void ath_beacon_tasklet(unsigned long data);
void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif);
int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif);
void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp);
int ath_beaconq_config(struct ath_softc *sc);
/*******/
/* ANI */
/*******/
#define ATH_STA_SHORT_CALINTERVAL 1000 /* 1 second */
#define ATH_AP_SHORT_CALINTERVAL 100 /* 100 ms */
ath9k: add new ANI implementation for AR9003 This adds support for ANI for AR9003. The implementation for ANI for AR9003 is slightly different than the one used for the older chipset families. It can technically be used for the older families as well but this is not yet fully tested so we only enable the new ANI for the AR5008, AR9001 and AR9002 families with a module parameter, force_new_ani. The old ANI implementation is left intact. Details of the new ANI implemention: * ANI adjustment logic is now table driven so that each ANI level setting is parameterized. This makes adjustments much more deterministic than the old procedure based logic and allows adjustments to be made incrementally to several parameters per level. * ANI register settings are now relative to INI values; so ANI param zero level == INI value. Appropriate floor and ceiling values are obeyed when adjustments are combined with INI values. * ANI processing is done once per second rather that every 100ms. The poll interval is now a set upon hardware initialization and can be picked up by the core driver. * OFDM error and CCK error processing are made in a round robin fashion rather than allowing all OFDM adjustments to be made before CCK adjustments. * ANI adjusts MRC CCK off in the presence of high CCK errors * When adjusting spur immunity (SI) and OFDM weak signal detection, ANI now sets register values for the extension channel too * When adjusting FIR step (ST), ANI now sets register for FIR step low too * FIR step adjustments now allow for an extra level of immunity for extremely noisy environments * The old Noise immunity setting (NI), which changes coarse low, size desired, etc have been removed. Changing these settings could affect up RIFS RX as well. * CCK weak signal adjustment is no longer used * ANI no longer enables phy error interrupts; in all cases phy hw counting registers are used instead * The phy error count (overflow) interrupts are also no longer used for ANI adjustments. All ANI adjustments are made via the polling routine and no adjustments are possible in the ISR context anymore * A history settings buffer is now correctly used for each channel; channel settings are initialized with the defaults but later changes are restored when returning back to that channel * When scanning, ANI is disabled settings are returned to (INI) defaults. * OFDM phy error thresholds are now 400 & 1000 (errors/second units) for low/high water marks, providing increased stability/hysteresis when changing levels. * Similarly CCK phy error thresholds are now 300 & 600 (errors/second) Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-12 04:33:45 +00:00
#define ATH_ANI_POLLINTERVAL_OLD 100 /* 100 ms */
#define ATH_ANI_POLLINTERVAL_NEW 1000 /* 1000 ms */
#define ATH_LONG_CALINTERVAL 30000 /* 30 seconds */
#define ATH_RESTART_CALINTERVAL 1200000 /* 20 minutes */
#define ATH_PAPRD_TIMEOUT 100 /* msecs */
void ath_hw_check(struct work_struct *work);
void ath_paprd_calibrate(struct work_struct *work);
void ath_ani_calibrate(unsigned long data);
/**********/
/* BTCOEX */
/**********/
/* Defines the BT AR_BT_COEX_WGHT used */
enum ath_stomp_type {
ATH_BTCOEX_NO_STOMP,
ATH_BTCOEX_STOMP_ALL,
ATH_BTCOEX_STOMP_LOW,
ATH_BTCOEX_STOMP_NONE
};
struct ath_btcoex {
bool hw_timer_enabled;
spinlock_t btcoex_lock;
struct timer_list period_timer; /* Timer for BT period */
u32 bt_priority_cnt;
unsigned long bt_priority_time;
int bt_stomp_type; /* Types of BT stomping */
u32 btcoex_no_stomp; /* in usec */
u32 btcoex_period; /* in usec */
u32 btscan_no_stomp; /* in usec */
struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
};
int ath_init_btcoex_timer(struct ath_softc *sc);
void ath9k_btcoex_timer_resume(struct ath_softc *sc);
void ath9k_btcoex_timer_pause(struct ath_softc *sc);
/********************/
/* LED Control */
/********************/
#define ATH_LED_PIN_DEF 1
#define ATH_LED_PIN_9287 8
#define ATH_LED_ON_DURATION_IDLE 350 /* in msecs */
#define ATH_LED_OFF_DURATION_IDLE 250 /* in msecs */
enum ath_led_type {
ATH_LED_RADIO,
ATH_LED_ASSOC,
ATH_LED_TX,
ATH_LED_RX
};
struct ath_led {
struct ath_softc *sc;
struct led_classdev led_cdev;
enum ath_led_type led_type;
char name[32];
bool registered;
};
void ath_init_leds(struct ath_softc *sc);
void ath_deinit_leds(struct ath_softc *sc);
/********************/
/* Main driver core */
/********************/
/*
* Default cache line size, in bytes.
* Used when PCI device not fully initialized by bootrom/BIOS
*/
#define DEFAULT_CACHELINE 32
#define ATH_REGCLASSIDS_MAX 10
#define ATH_CABQ_READY_TIME 80 /* % of beacon interval */
#define ATH_MAX_SW_RETRIES 10
#define ATH_CHAN_MAX 255
#define IEEE80211_WEP_NKID 4 /* number of key ids */
#define ATH_TXPOWER_MAX 100 /* .5 dBm units */
#define ATH_RATE_DUMMY_MARKER 0
#define SC_OP_INVALID BIT(0)
#define SC_OP_BEACONS BIT(1)
#define SC_OP_RXAGGR BIT(2)
#define SC_OP_TXAGGR BIT(3)
#define SC_OP_FULL_RESET BIT(4)
#define SC_OP_PREAMBLE_SHORT BIT(5)
#define SC_OP_PROTECT_ENABLE BIT(6)
#define SC_OP_RXFLUSH BIT(7)
#define SC_OP_LED_ASSOCIATED BIT(8)
#define SC_OP_LED_ON BIT(9)
#define SC_OP_SCANNING BIT(10)
#define SC_OP_TSF_RESET BIT(11)
#define SC_OP_BT_PRIORITY_DETECTED BIT(12)
#define SC_OP_BT_SCAN BIT(13)
ath9k: Fix bug in starting ani There are few places where ANI is started without checking if it is right to start. This might lead to a case where ani timer would be left undeleted and cause improper memory acccess during module unload. This bug is clearly exposed with paprd support where the driver detects tx hang and does a chip reset. During this reset ani is (re)started without checking if it needs to be started. This would leave a timer scheduled even after all the resources are freed and cause a panic. This patch introduces a bit in sc_flags to indicate if ani needs to be started in sw_scan_start() and ath_reset(). This would fix the following panic. This issue is easily seen with ar9003 + paprd. BUG: unable to handle kernel paging request at 0000000000003f38 [<ffffffff81075391>] ? __queue_work+0x41/0x50 [<ffffffff8106afaa>] run_timer_softirq+0x17a/0x370 [<ffffffff81088be8>] ? tick_dev_program_event+0x48/0x110 [<ffffffff81061f69>] __do_softirq+0xb9/0x1f0 [<ffffffff810ba060>] ? handle_IRQ_event+0x50/0x160 [<ffffffff8100af5c>] call_softirq+0x1c/0x30 [<ffffffff8100c9f5>] do_softirq+0x65/0xa0 [<ffffffff81061e25>] irq_exit+0x85/0x90 [<ffffffff8155e095>] do_IRQ+0x75/0xf0 [<ffffffff815570d3>] ret_from_intr+0x0/0x11 <EOI> [<ffffffff812fd67b>] ? acpi_idle_enter_simple+0xe4/0x119 [<ffffffff812fd674>] ? acpi_idle_enter_simple+0xdd/0x119 [<ffffffff81441c87>] cpuidle_idle_call+0xa7/0x140 [<ffffffff81008da3>] cpu_idle+0xb3/0x110 [<ffffffff81550722>] start_secondary+0x1ee/0x1f5 Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-23 13:49:21 +00:00
#define SC_OP_ANI_RUN BIT(14)
/* Powersave flags */
#define PS_WAIT_FOR_BEACON BIT(0)
#define PS_WAIT_FOR_CAB BIT(1)
#define PS_WAIT_FOR_PSPOLL_DATA BIT(2)
#define PS_WAIT_FOR_TX_ACK BIT(3)
#define PS_BEACON_SYNC BIT(4)
#define PS_NULLFUNC_COMPLETED BIT(5)
#define PS_ENABLED BIT(6)
struct ath_wiphy;
struct ath_rate_table;
struct ath_softc {
struct ieee80211_hw *hw;
struct device *dev;
spinlock_t wiphy_lock; /* spinlock to protect ath_wiphy data */
struct ath_wiphy *pri_wiphy;
struct ath_wiphy **sec_wiphy; /* secondary wiphys (virtual radios); may
* have NULL entries */
int num_sec_wiphy; /* number of sec_wiphy pointers in the array */
int chan_idx;
int chan_is_ht;
struct ath_wiphy *next_wiphy;
struct work_struct chan_work;
int wiphy_select_failures;
unsigned long wiphy_select_first_fail;
struct delayed_work wiphy_work;
unsigned long wiphy_scheduler_int;
int wiphy_scheduler_index;
struct tasklet_struct intr_tq;
struct tasklet_struct bcon_tasklet;
struct ath_hw *sc_ah;
void __iomem *mem;
int irq;
spinlock_t sc_resetlock;
spinlock_t sc_serial_rw;
spinlock_t sc_pm_lock;
struct mutex mutex;
struct work_struct paprd_work;
struct work_struct hw_check_work;
struct completion paprd_complete;
u32 intrstatus;
u32 sc_flags; /* SC_OP_* */
u16 ps_flags; /* PS_* */
u16 curtxpow;
u8 nbcnvifs;
u16 nvifs;
bool ps_enabled;
bool ps_idle;
unsigned long ps_usecount;
struct ath_config config;
struct ath_rx rx;
struct ath_tx tx;
struct ath_beacon beacon;
const struct ath_rate_table *cur_rate_table;
enum wireless_mode cur_rate_mode;
struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
struct ath_led radio_led;
struct ath_led assoc_led;
struct ath_led tx_led;
struct ath_led rx_led;
struct delayed_work ath_led_blink_work;
int led_on_duration;
int led_off_duration;
int led_on_cnt;
int led_off_cnt;
int beacon_interval;
#ifdef CONFIG_ATH9K_DEBUGFS
struct ath9k_debug debug;
#endif
struct ath_beacon_config cur_beacon_conf;
struct delayed_work tx_complete_work;
struct ath_btcoex btcoex;
struct ath_descdma txsdma;
};
struct ath_wiphy {
struct ath_softc *sc; /* shared for all virtual wiphys */
struct ieee80211_hw *hw;
enum ath_wiphy_state {
ATH_WIPHY_INACTIVE,
ATH_WIPHY_ACTIVE,
ATH_WIPHY_PAUSING,
ATH_WIPHY_PAUSED,
ATH_WIPHY_SCAN,
} state;
bool idle;
int chan_idx;
int chan_is_ht;
};
void ath9k_tasklet(unsigned long data);
int ath_reset(struct ath_softc *sc, bool retry_tx);
int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
int ath_cabq_update(struct ath_softc *);
static inline void ath_read_cachesize(struct ath_common *common, int *csz)
{
common->bus_ops->read_cachesize(common, csz);
}
extern struct ieee80211_ops ath9k_ops;
extern int modparam_nohwcrypt;
extern int led_blink;
irqreturn_t ath_isr(int irq, void *dev);
int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
const struct ath_bus_ops *bus_ops);
void ath9k_deinit_device(struct ath_softc *sc);
void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
struct ath9k_channel *ichan);
void ath_update_chainmask(struct ath_softc *sc, int is_ht);
int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
struct ath9k_channel *hchan);
void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw);
void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw);
bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode);
#ifdef CONFIG_PCI
int ath_pci_init(void);
void ath_pci_exit(void);
#else
static inline int ath_pci_init(void) { return 0; };
static inline void ath_pci_exit(void) {};
#endif
#ifdef CONFIG_ATHEROS_AR71XX
int ath_ahb_init(void);
void ath_ahb_exit(void);
#else
static inline int ath_ahb_init(void) { return 0; };
static inline void ath_ahb_exit(void) {};
#endif
void ath9k_ps_wakeup(struct ath_softc *sc);
void ath9k_ps_restore(struct ath_softc *sc);
void ath9k_set_bssid_mask(struct ieee80211_hw *hw);
int ath9k_wiphy_add(struct ath_softc *sc);
int ath9k_wiphy_del(struct ath_wiphy *aphy);
void ath9k_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb);
int ath9k_wiphy_pause(struct ath_wiphy *aphy);
int ath9k_wiphy_unpause(struct ath_wiphy *aphy);
int ath9k_wiphy_select(struct ath_wiphy *aphy);
void ath9k_wiphy_set_scheduler(struct ath_softc *sc, unsigned int msec_int);
void ath9k_wiphy_chan_work(struct work_struct *work);
bool ath9k_wiphy_started(struct ath_softc *sc);
void ath9k_wiphy_pause_all_forced(struct ath_softc *sc,
struct ath_wiphy *selected);
bool ath9k_wiphy_scanning(struct ath_softc *sc);
void ath9k_wiphy_work(struct work_struct *work);
bool ath9k_all_wiphys_idle(struct ath_softc *sc);
void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle);
void ath_mac80211_stop_queue(struct ath_softc *sc, u16 skb_queue);
void ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue);
void ath_start_rfkill_poll(struct ath_softc *sc);
extern void ath9k_rfkill_poll_state(struct ieee80211_hw *hw);
#endif /* ATH9K_H */