linux/drivers/base/Makefile

31 lines
946 B
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
# Makefile for the Linux device tree
obj-y := component.o core.o bus.o dd.o syscore.o \
driver.o class.o platform.o \
cpu.o firmware.o init.o map.o devres.o \
attribute_container.o transport_class.o \
topology.o container.o property.o cacheinfo.o \
swnode.o
Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev Devtmpfs lets the kernel create a tmpfs instance called devtmpfs very early at kernel initialization, before any driver-core device is registered. Every device with a major/minor will provide a device node in devtmpfs. Devtmpfs can be changed and altered by userspace at any time, and in any way needed - just like today's udev-mounted tmpfs. Unmodified udev versions will run just fine on top of it, and will recognize an already existing kernel-created device node and use it. The default node permissions are root:root 0600. Proper permissions and user/group ownership, meaningful symlinks, all other policy still needs to be applied by userspace. If a node is created by devtmps, devtmpfs will remove the device node when the device goes away. If the device node was created by userspace, or the devtmpfs created node was replaced by userspace, it will no longer be removed by devtmpfs. If it is requested to auto-mount it, it makes init=/bin/sh work without any further userspace support. /dev will be fully populated and dynamic, and always reflect the current device state of the kernel. With the commonly used dynamic device numbers, it solves the problem where static devices nodes may point to the wrong devices. It is intended to make the initial bootup logic simpler and more robust, by de-coupling the creation of the inital environment, to reliably run userspace processes, from a complex userspace bootstrap logic to provide a working /dev. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Tested-By: Harald Hoyer <harald@redhat.com> Tested-By: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-30 13:23:42 +00:00
obj-$(CONFIG_DEVTMPFS) += devtmpfs.o
obj-y += power/
obj-$(CONFIG_ISA_BUS_API) += isa.o
obj-y += firmware_loader/
obj-$(CONFIG_NUMA) += node.o
obj-$(CONFIG_MEMORY_HOTPLUG_SPARSE) += memory.o
ifeq ($(CONFIG_SYSFS),y)
obj-$(CONFIG_MODULES) += module.o
endif
obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
regmap: Add generic non-memory mapped register access API There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-11 17:59:58 +00:00
obj-$(CONFIG_REGMAP) += regmap/
obj-$(CONFIG_SOC_BUS) += soc.o
drivers/pinctrl: grab default handles from device core This makes the device core auto-grab the pinctrl handle and set the "default" (PINCTRL_STATE_DEFAULT) state for every device that is present in the device model right before probe. This will account for the lion's share of embedded silicon devcies. A modification of the semantics for pinctrl_get() is also done: previously if the pinctrl handle for a certain device was already taken, the pinctrl core would return an error. Now, since the core may have already default-grabbed the handle and set its state to "default", if the handle was already taken, this will be disregarded and the located, previously instanitated handle will be returned to the caller. This way all code in drivers explicitly requesting their pinctrl handlers will still be functional, and drivers that want to explicitly retrieve and switch their handles can still do that. But if the desired functionality is just boilerplate of this type in the probe() function: struct pinctrl *p; p = devm_pinctrl_get_select_default(&dev); if (IS_ERR(p)) { if (PTR_ERR(p) == -EPROBE_DEFER) return -EPROBE_DEFER; dev_warn(&dev, "no pinctrl handle\n"); } The discussion began with the addition of such boilerplate to the omap4 keypad driver: http://marc.info/?l=linux-input&m=135091157719300&w=2 A previous approach using notifiers was discussed: http://marc.info/?l=linux-kernel&m=135263661110528&w=2 This failed because it could not handle deferred probes. This patch alone does not solve the entire dilemma faced: whether code should be distributed into the drivers or if it should be centralized to e.g. a PM domain. But it solves the immediate issue of the addition of boilerplate to a lot of drivers that just want to grab the default state. As mentioned, they can later explicitly retrieve the handle and set different states, and this could as well be done by e.g. PM domains as it is only related to a certain struct device * pointer. ChangeLog v4->v5 (Stephen): - Simplified the devicecore grab code. - Deleted a piece of documentation recommending that pins be mapped to a device rather than hogged. ChangeLog v3->v4 (Linus): - Drop overzealous NULL checks. - Move kref initialization to pinctrl_create(). - Seeking Tested-by from Stephen Warren so we do not disturb the Tegra platform. - Seeking ACK on this from Greg (and others who like it) so I can merge it through the pinctrl subsystem. ChangeLog v2->v3 (Linus): - Abstain from using IS_ERR_OR_NULL() in the driver core, Russell recently sent a patch to remove it. Handle the NULL case explicitly even though it's a bogus case. - Make sure we handle probe deferral correctly in the device core file. devm_kfree() the container on error so we don't waste memory for devices without pinctrl handles. - Introduce reference counting into the pinctrl core using <linux/kref.h> so that we don't release pinctrl handles that have been obtained for two or more places. ChangeLog v1->v2 (Linus): - Only store a pointer in the device struct, and only allocate this if it's really used by the device. Cc: Felipe Balbi <balbi@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Mitch Bradley <wmb@firmworks.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Rickard Andersson <rickard.andersson@stericsson.com> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [swarren: fixed and simplified error-handling in pinctrl_bind_pins(), to correctly handle deferred probe. Removed admonition from docs not to use pinctrl hogs for devices] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-22 17:56:14 +00:00
obj-$(CONFIG_PINCTRL) += pinctrl.o
2014-09-12 07:01:56 +00:00
obj-$(CONFIG_DEV_COREDUMP) += devcoredump.o
drivers/base: Add MSI domain support for non-PCI devices With the msi_list and the msi_domain properties now being at the generic device level, it is starting to be relatively easy to offer a generic way of providing non-PCI MSIs. The two major hurdles with this idea are: - Lack of global ID that identifies a device: this is worked around by having a global ID allocator for each device that gets enrolled in the platform MSI subsystem - Lack of standard way to write the message in the generating device. This is solved by mandating driver code to provide a write_msg callback, so that everyone can have their own square wheel Apart from that, the API is fairly straightforward: - platform_msi_create_irq_domain creates an MSI domain that gets tagged with DOMAIN_BUS_PLATFORM_MSI - platform_msi_domain_alloc_irqs allocate MSIs for a given device, populating the msi_list - platform_msi_domain_free_irqs does what is written on the tin [ tglx: Created a seperate struct platform_msi_desc and added kerneldoc entries ] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-10-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 13:46:16 +00:00
obj-$(CONFIG_GENERIC_MSI_IRQ_DOMAIN) += platform-msi.o
obj-$(CONFIG_GENERIC_ARCH_TOPOLOGY) += arch_topology.o
obj-y += test/
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG