linux/include/sound/sof.h

178 lines
4.5 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* Copyright(c) 2018 Intel Corporation
*
* Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
*/
#ifndef __INCLUDE_SOUND_SOF_H
#define __INCLUDE_SOUND_SOF_H
#include <linux/pci.h>
#include <sound/soc.h>
#include <sound/soc-acpi.h>
struct snd_sof_dsp_ops;
struct snd_sof_dev;
/**
* enum sof_fw_state - DSP firmware state definitions
* @SOF_FW_BOOT_NOT_STARTED: firmware boot is not yet started
* @SOF_DSPLESS_MODE: DSP is not used
* @SOF_FW_BOOT_PREPARE: preparing for boot (firmware loading for exaqmple)
* @SOF_FW_BOOT_IN_PROGRESS: firmware boot is in progress
* @SOF_FW_BOOT_FAILED: firmware boot failed
* @SOF_FW_BOOT_READY_FAILED: firmware booted but fw_ready op failed
* @SOF_FW_BOOT_READY_OK: firmware booted and fw_ready op passed
* @SOF_FW_BOOT_COMPLETE: firmware is booted up and functional
* @SOF_FW_CRASHED: firmware crashed after successful boot
*/
enum sof_fw_state {
SOF_FW_BOOT_NOT_STARTED = 0,
SOF_DSPLESS_MODE,
SOF_FW_BOOT_PREPARE,
SOF_FW_BOOT_IN_PROGRESS,
SOF_FW_BOOT_FAILED,
SOF_FW_BOOT_READY_FAILED,
SOF_FW_BOOT_READY_OK,
SOF_FW_BOOT_COMPLETE,
SOF_FW_CRASHED,
};
/* DSP power states */
enum sof_dsp_power_states {
SOF_DSP_PM_D0,
SOF_DSP_PM_D1,
SOF_DSP_PM_D2,
SOF_DSP_PM_D3,
};
/* Definitions for multiple IPCs */
enum sof_ipc_type {
SOF_IPC_TYPE_3,
SOF_IPC_TYPE_4,
SOF_IPC_TYPE_COUNT
};
struct sof_loadable_file_profile {
enum sof_ipc_type ipc_type;
const char *fw_path;
const char *fw_path_postfix;
const char *fw_name;
const char *fw_lib_path;
const char *fw_lib_path_postfix;
const char *tplg_path;
const char *tplg_name;
};
/*
* SOF Platform data.
*/
struct snd_sof_pdata {
const char *name;
const char *platform;
ASoC: SOF: Pass PCI SSID to machine driver Pass the PCI SSID of the audio interface through to the machine driver. This allows the machine driver to use the SSID to uniquely identify the specific hardware configuration and apply any platform-specific configuration. struct snd_sof_pdata is passed around inside the SOF code, but it then passes configuration information to the machine driver through struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID information has been added to both snd_sof_pdata and snd_soc_acpi_mach_params. PCI does not define 0x0000 as an invalid value so we can't use zero to indicate that the struct member was not written. Instead a flag is included to indicate that a value has been written to the subsystem_vendor and subsystem_device members. sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct pci_dev so it can fill in the SSID value. sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It copies the SSID information across to the struct snd_soc_acpi_mach_params. This done before calling any custom set_mach_params() so that it could be used by the set_mach_params() callback to apply variant params. The machine driver receives the struct snd_soc_acpi_mach as its platform_data. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-12 16:32:05 +00:00
/*
* PCI SSID. As PCI does not define 0 as invalid, the subsystem_id_set
* flag indicates that a value has been written to these members.
*/
unsigned short subsystem_vendor;
unsigned short subsystem_device;
bool subsystem_id_set;
struct device *dev;
/*
* notification callback used if the hardware initialization
* can take time or is handled in a workqueue. This callback
* can be used by the caller to e.g. enable runtime_pm
* or limit functionality until all low-level inits are
* complete.
*/
void (*sof_probe_complete)(struct device *dev);
/* descriptor */
const struct sof_dev_desc *desc;
/* platform's preferred IPC type and path overrides */
struct sof_loadable_file_profile ipc_file_profile_base;
/* firmware and topology filenames */
const char *fw_filename_prefix;
const char *fw_filename;
const char *tplg_filename_prefix;
const char *tplg_filename;
/* loadable external libraries available under this directory */
const char *fw_lib_prefix;
/* machine */
struct platform_device *pdev_mach;
const struct snd_soc_acpi_mach *machine;
const struct snd_sof_of_mach *of_machine;
void *hw_pdata;
enum sof_ipc_type ipc_type;
};
/*
* Descriptor used for setting up SOF platform data. This is used when
* ACPI/PCI data is missing or mapped differently.
*/
struct sof_dev_desc {
/* list of machines using this configuration */
struct snd_soc_acpi_mach *machines;
struct snd_sof_of_mach *of_machines;
/* alternate list of machines using this configuration */
struct snd_soc_acpi_mach *alt_machines;
bool use_acpi_target_states;
/* Platform resource indexes in BAR / ACPI resources. */
/* Must set to -1 if not used - add new items to end */
int resindex_lpe_base;
int resindex_pcicfg_base;
int resindex_imr_base;
int irqindex_host_ipc;
/* IPC timeouts in ms */
int ipc_timeout;
int boot_timeout;
/* chip information for dsp */
const void *chip_info;
/* defaults for no codec mode */
const char *nocodec_tplg_filename;
/* information on supported IPCs */
unsigned int ipc_supported_mask;
enum sof_ipc_type ipc_default;
/* The platform supports DSPless mode */
bool dspless_mode_supported;
/* defaults paths for firmware, library and topology files */
const char *default_fw_path[SOF_IPC_TYPE_COUNT];
const char *default_lib_path[SOF_IPC_TYPE_COUNT];
const char *default_tplg_path[SOF_IPC_TYPE_COUNT];
/* default firmware name */
const char *default_fw_filename[SOF_IPC_TYPE_COUNT];
const struct snd_sof_dsp_ops *ops;
int (*ops_init)(struct snd_sof_dev *sdev);
void (*ops_free)(struct snd_sof_dev *sdev);
};
int sof_dai_get_mclk(struct snd_soc_pcm_runtime *rtd);
int sof_dai_get_bclk(struct snd_soc_pcm_runtime *rtd);
#endif