system/linux
system/linux
1
0
Fork 0
mirror of https://github.com/torvalds/linux synced 2024-09-20 19:17:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
linux/net/dsa/port.c

937 lines
22 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:01 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
net: dsa: move port state setters Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:44 +00:00
/*
* Handling of a single switch port
*
* Copyright (c) 2017 Savoir-faire Linux Inc.
* Vivien Didelot <vivien.didelot@savoirfairelinux.com>
*/
#include <linux/if_bridge.h>
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
#include <linux/notifier.h>
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
#include <linux/of_mdio.h>
#include <linux/of_net.h>
net: dsa: move port state setters Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:44 +00:00
#include "dsa_priv.h"
net: dsa: document the existing switch tree notifiers and add a new one The existence of dsa_broadcast has generated some confusion in the past: https://www.mail-archive.com/netdev@vger.kernel.org/msg365042.html So let's document the existing dsa_port_notify and dsa_broadcast functions and explain when each of them should be used. Also, in fact, the in-between function has always been there but was lacking a name, and is the main reason for this patch: dsa_tree_notify. Refactor dsa_broadcast to use it. This patch also moves dsa_broadcast (a top-level function) to dsa2.c, where it really belonged in the first place, but had no companion so it stood with dsa_port_notify. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:04 +00:00
/**
* dsa_port_notify - Notify the switching fabric of changes to a port
* @dp: port on which change occurred
* @e: event, must be of type DSA_NOTIFIER_*
* @v: event-specific value.
*
* Notify all switches in the DSA tree that this port's switch belongs to,
* including this switch itself, of an event. Allows the other switches to
* reconfigure themselves for cross-chip operations. Can also be used to
* reconfigure ports without net_devices (CPU ports, DSA links) whenever
* a user port's state changes.
*/
net: dsa: add more const attributes The notify mechanism does not need to modify the port it is notifying. So make the parameter const. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 22:11:01 +00:00
static int dsa_port_notify(const struct dsa_port *dp, unsigned long e, void *v)
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
{
net: dsa: document the existing switch tree notifiers and add a new one The existence of dsa_broadcast has generated some confusion in the past: https://www.mail-archive.com/netdev@vger.kernel.org/msg365042.html So let's document the existing dsa_port_notify and dsa_broadcast functions and explain when each of them should be used. Also, in fact, the in-between function has always been there but was lacking a name, and is the main reason for this patch: dsa_tree_notify. Refactor dsa_broadcast to use it. This patch also moves dsa_broadcast (a top-level function) to dsa2.c, where it really belonged in the first place, but had no companion so it stood with dsa_port_notify. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:04 +00:00
return dsa_tree_notify(dp->ds->dst, e, v);
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
}
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
int dsa_port_set_state(struct dsa_port *dp, u8 state)
net: dsa: move port state setters Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:44 +00:00
{
struct dsa_switch *ds = dp->ds;
int port = dp->index;
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
if (!ds->ops->port_stp_state_set)
return -EOPNOTSUPP;
net: dsa: move port state setters Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:44 +00:00
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
ds->ops->port_stp_state_set(ds, port, state);
net: dsa: move port state setters Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:44 +00:00
if (ds->ops->port_fast_age) {
/* Fast age FDB entries or flush appropriate forwarding database
* for the given port, if we are moving it from Learning or
* Forwarding state, to Disabled or Blocking or Listening state.
*/
if ((dp->stp_state == BR_STATE_LEARNING ||
dp->stp_state == BR_STATE_FORWARDING) &&
(state == BR_STATE_DISABLED ||
state == BR_STATE_BLOCKING ||
state == BR_STATE_LISTENING))
ds->ops->port_fast_age(ds, port);
}
dp->stp_state = state;
return 0;
}
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
static void dsa_port_set_state_now(struct dsa_port *dp, u8 state)
net: dsa: move port state setters Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:44 +00:00
{
int err;
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
err = dsa_port_set_state(dp, state);
net: dsa: move port state setters Add a new port.c file to hold all DSA port-wide logic. This patch moves in the code which sets a port state. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:44 +00:00
if (err)
pr_err("DSA: failed to set STP state %u (%d)\n", state, err);
}
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
net: dsa: fix phylink_start()/phylink_stop() calls Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 15:01:46 +00:00
int dsa_port_enable_rt(struct dsa_port *dp, struct phy_device *phy)
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
{
struct dsa_switch *ds = dp->ds;
int port = dp->index;
int err;
if (ds->ops->port_enable) {
err = ds->ops->port_enable(ds, port, phy);
if (err)
return err;
}
net: dsa: fix unintended change of bridge interface STP state When a DSA port is added to a bridge and brought up, the resulting STP state programmed into the hardware depends on the order that these operations are performed. However, the Linux bridge code believes that the port is in disabled mode. If the DSA port is first added to a bridge and then brought up, it will be in blocking mode. If it is brought up and then added to the bridge, it will be in disabled mode. This difference is caused by DSA always setting the STP mode in dsa_port_enable() whether or not this port is part of a bridge. Since bridge always sets the STP state when the port is added, brought up or taken down, it is unnecessary for us to manipulate the STP state. Apparently, this code was copied from Rocker, and the very next day a similar fix for Rocker was merged but was not propagated to DSA. See e47172ab7e41 ("rocker: put port in FORWADING state after leaving bridge") Fixes: b73adef67765 ("net: dsa: integrate with SWITCHDEV for HW bridging") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 10:32:52 +00:00
if (!dp->bridge_dev)
dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
net: dsa: fix phylink_start()/phylink_stop() calls Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 15:01:46 +00:00
if (dp->pl)
phylink_start(dp->pl);
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
return 0;
}
net: dsa: fix phylink_start()/phylink_stop() calls Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 15:01:46 +00:00
int dsa_port_enable(struct dsa_port *dp, struct phy_device *phy)
{
int err;
rtnl_lock();
err = dsa_port_enable_rt(dp, phy);
rtnl_unlock();
return err;
}
void dsa_port_disable_rt(struct dsa_port *dp)
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
{
struct dsa_switch *ds = dp->ds;
int port = dp->index;
net: dsa: fix phylink_start()/phylink_stop() calls Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 15:01:46 +00:00
if (dp->pl)
phylink_stop(dp->pl);
net: dsa: fix unintended change of bridge interface STP state When a DSA port is added to a bridge and brought up, the resulting STP state programmed into the hardware depends on the order that these operations are performed. However, the Linux bridge code believes that the port is in disabled mode. If the DSA port is first added to a bridge and then brought up, it will be in blocking mode. If it is brought up and then added to the bridge, it will be in disabled mode. This difference is caused by DSA always setting the STP mode in dsa_port_enable() whether or not this port is part of a bridge. Since bridge always sets the STP state when the port is added, brought up or taken down, it is unnecessary for us to manipulate the STP state. Apparently, this code was copied from Rocker, and the very next day a similar fix for Rocker was merged but was not propagated to DSA. See e47172ab7e41 ("rocker: put port in FORWADING state after leaving bridge") Fixes: b73adef67765 ("net: dsa: integrate with SWITCHDEV for HW bridging") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 10:32:52 +00:00
if (!dp->bridge_dev)
dsa_port_set_state_now(dp, BR_STATE_DISABLED);
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
if (ds->ops->port_disable)
dsa: Remove phydev parameter from disable_port call No current DSA driver makes use of the phydev parameter passed to the disable_port call. Remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 19:44:43 +00:00
ds->ops->port_disable(ds, port);
net: dsa: add port enable and disable helpers Provide dsa_port_enable and dsa_port_disable helpers to respectively enable and disable a switch port. This makes the dsa_port_set_state_now helper static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22 23:01:56 +00:00
}
net: dsa: fix phylink_start()/phylink_stop() calls Place phylink_start()/phylink_stop() inside dsa_port_enable() and dsa_port_disable(), which ensures that we call phylink_stop() before tearing down phylink - which is a documented requirement. Failure to do so can cause use-after-free bugs. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03 15:01:46 +00:00
void dsa_port_disable(struct dsa_port *dp)
{
rtnl_lock();
dsa_port_disable_rt(dp);
rtnl_unlock();
}
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
static void dsa_port_change_brport_flags(struct dsa_port *dp,
bool bridge_offload)
{
net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:55 +00:00
struct switchdev_brport_flags flags;
int flag;
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:55 +00:00
flags.mask = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
if (bridge_offload)
net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:55 +00:00
flags.val = flags.mask;
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
else
net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:55 +00:00
flags.val = flags.mask & ~BR_LEARNING;
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:55 +00:00
for_each_set_bit(flag, &flags.mask, 32) {
struct switchdev_brport_flags tmp;
tmp.val = flags.val & BIT(flag);
tmp.mask = BIT(flag);
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
dsa_port_bridge_flags(dp, tmp, NULL);
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
}
}
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br)
{
struct dsa_notifier_bridge_info info = {
net: dsa: permit cross-chip bridging between all trees in the system One way of utilizing DSA is by cascading switches which do not all have compatible taggers. Consider the following real-life topology: +---------------------------------------------------------------+ | LS1028A | | +------------------------------+ | | | DSA master for Felix | | | |(internal ENETC port 2: eno2))| | | +------------+------------------------------+-------------+ | | | Felix embedded L2 switch | | | | | | | | +--------------+ +--------------+ +--------------+ | | | | |DSA master for| |DSA master for| |DSA master for| | | | | | SJA1105 1 | | SJA1105 2 | | SJA1105 3 | | | | | |(Felix port 1)| |(Felix port 2)| |(Felix port 3)| | | +--+-+--------------+---+--------------+---+--------------+--+--+ +-----------------------+ +-----------------------+ +-----------------------+ | SJA1105 switch 1 | | SJA1105 switch 2 | | SJA1105 switch 3 | +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ |sw1p0|sw1p1|sw1p2|sw1p3| |sw2p0|sw2p1|sw2p2|sw2p3| |sw3p0|sw3p1|sw3p2|sw3p3| +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ The above can be described in the device tree as follows (obviously not complete): mscc_felix { dsa,member = <0 0>; ports { port@4 { ethernet = <&enetc_port2>; }; }; }; sja1105_switch1 { dsa,member = <1 1>; ports { port@4 { ethernet = <&mscc_felix_port1>; }; }; }; sja1105_switch2 { dsa,member = <2 2>; ports { port@4 { ethernet = <&mscc_felix_port2>; }; }; }; sja1105_switch3 { dsa,member = <3 3>; ports { port@4 { ethernet = <&mscc_felix_port3>; }; }; }; Basically we instantiate one DSA switch tree for every hardware switch in the system, but we still give them globally unique switch IDs (will come back to that later). Having 3 disjoint switch trees makes the tagger drivers "just work", because net devices are registered for the 3 Felix DSA master ports, and they are also DSA slave ports to the ENETC port. So packets received on the ENETC port are stripped of their stacked DSA tags one by one. Currently, hardware bridging between ports on the same sja1105 chip is possible, but switching between sja1105 ports on different chips is handled by the software bridge. This is fine, but we can do better. In fact, the dsa_8021q tag used by sja1105 is compatible with cascading. In other words, a sja1105 switch can correctly parse and route a packet containing a dsa_8021q tag. So if we could enable hardware bridging on the Felix DSA master ports, cross-chip bridging could be completely offloaded. Such as system would be used as follows: ip link add dev br0 type bridge && ip link set dev br0 up for port in sw0p0 sw0p1 sw0p2 sw0p3 \ sw1p0 sw1p1 sw1p2 sw1p3 \ sw2p0 sw2p1 sw2p2 sw2p3; do ip link set dev $port master br0 done The above makes switching between ports on the same row be performed in hardware, and between ports on different rows in software. Now assume the Felix switch ports are called swp0, swp1, swp2. By running the following extra commands: ip link add dev br1 type bridge && ip link set dev br1 up for port in swp0 swp1 swp2; do ip link set dev $port master br1 done the CPU no longer sees packets which traverse sja1105 switch boundaries and can be forwarded directly by Felix. The br1 bridge would not be used for any sort of traffic termination. For this to work, we need to give drivers an opportunity to listen for bridging events on DSA trees other than their own, and pass that other tree index as argument. I have made the assumption, for the moment, that the other existing DSA notifiers don't need to be broadcast to other trees. That assumption might turn out to be incorrect. But in the meantime, introduce a dsa_broadcast function, similar in purpose to dsa_port_notify, which is used only by the bridging notifiers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:41 +00:00
.tree_index = dp->ds->dst->index,
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
.sw_index = dp->ds->index,
.port = dp->index,
.br = br,
};
int err;
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
/* Notify the port driver to set its configurable flags in a way that
* matches the initial settings of a bridge port.
*/
dsa_port_change_brport_flags(dp, true);
net: dsa: enable flooding for bridge ports Switches work by learning the MAC address for each attached station by monitoring traffic from each station. When a station sends a packet, the switch records which port the MAC address is connected to. With IPv4 networking, before communication commences with a neighbour, an ARP packet is broadcasted to all stations asking for the MAC address corresponding with the IPv4. The desired station responds with an ARP reply, and the ARP reply causes the switch to learn which port the station is connected to. With IPv6 networking, the situation is rather different. Rather than broadcasting ARP packets, a "neighbour solicitation" is multicasted rather than broadcasted. This multicast needs to reach the intended station in order for the neighbour to be discovered. Once a neighbour has been discovered, and entered into the sending stations neighbour cache, communication can restart at a point later without sending a new neighbour solicitation, even if the entry in the neighbour cache is marked as stale. This can be after the MAC address has expired from the forwarding cache of the DSA switch - when that occurs, there is a long pause in communication. Our DSA implementation for mv88e6xxx switches disables flooding of multicast and unicast frames for bridged ports. As per the above description, this is fine for IPv4 networking, since the broadcasted ARP queries will be sent to and received by all stations on the same network. However, this breaks IPv6 very badly - blocking neighbour solicitations and later causing connections to stall. The defaults that the Linux bridge code expect from bridges are for unknown unicast and unknown multicast frames to be flooded to all ports on the bridge, which is at odds to the defaults adopted by our DSA implementation for mv88e6xxx switches. This commit enables by default flooding of both unknown unicast and unknown multicast frames whenever a port is added to a bridge, and disables the flooding when a port leaves the bridge. This means that mv88e6xxx DSA switches now behave as per the bridge(8) man page, and IPv6 works flawlessly through such a switch. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:06 +00:00
/* Here the interface is already bridged. Reflect the current
* configuration so that drivers can program their chips accordingly.
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
*/
dp->bridge_dev = br;
net: dsa: permit cross-chip bridging between all trees in the system One way of utilizing DSA is by cascading switches which do not all have compatible taggers. Consider the following real-life topology: +---------------------------------------------------------------+ | LS1028A | | +------------------------------+ | | | DSA master for Felix | | | |(internal ENETC port 2: eno2))| | | +------------+------------------------------+-------------+ | | | Felix embedded L2 switch | | | | | | | | +--------------+ +--------------+ +--------------+ | | | | |DSA master for| |DSA master for| |DSA master for| | | | | | SJA1105 1 | | SJA1105 2 | | SJA1105 3 | | | | | |(Felix port 1)| |(Felix port 2)| |(Felix port 3)| | | +--+-+--------------+---+--------------+---+--------------+--+--+ +-----------------------+ +-----------------------+ +-----------------------+ | SJA1105 switch 1 | | SJA1105 switch 2 | | SJA1105 switch 3 | +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ |sw1p0|sw1p1|sw1p2|sw1p3| |sw2p0|sw2p1|sw2p2|sw2p3| |sw3p0|sw3p1|sw3p2|sw3p3| +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ The above can be described in the device tree as follows (obviously not complete): mscc_felix { dsa,member = <0 0>; ports { port@4 { ethernet = <&enetc_port2>; }; }; }; sja1105_switch1 { dsa,member = <1 1>; ports { port@4 { ethernet = <&mscc_felix_port1>; }; }; }; sja1105_switch2 { dsa,member = <2 2>; ports { port@4 { ethernet = <&mscc_felix_port2>; }; }; }; sja1105_switch3 { dsa,member = <3 3>; ports { port@4 { ethernet = <&mscc_felix_port3>; }; }; }; Basically we instantiate one DSA switch tree for every hardware switch in the system, but we still give them globally unique switch IDs (will come back to that later). Having 3 disjoint switch trees makes the tagger drivers "just work", because net devices are registered for the 3 Felix DSA master ports, and they are also DSA slave ports to the ENETC port. So packets received on the ENETC port are stripped of their stacked DSA tags one by one. Currently, hardware bridging between ports on the same sja1105 chip is possible, but switching between sja1105 ports on different chips is handled by the software bridge. This is fine, but we can do better. In fact, the dsa_8021q tag used by sja1105 is compatible with cascading. In other words, a sja1105 switch can correctly parse and route a packet containing a dsa_8021q tag. So if we could enable hardware bridging on the Felix DSA master ports, cross-chip bridging could be completely offloaded. Such as system would be used as follows: ip link add dev br0 type bridge && ip link set dev br0 up for port in sw0p0 sw0p1 sw0p2 sw0p3 \ sw1p0 sw1p1 sw1p2 sw1p3 \ sw2p0 sw2p1 sw2p2 sw2p3; do ip link set dev $port master br0 done The above makes switching between ports on the same row be performed in hardware, and between ports on different rows in software. Now assume the Felix switch ports are called swp0, swp1, swp2. By running the following extra commands: ip link add dev br1 type bridge && ip link set dev br1 up for port in swp0 swp1 swp2; do ip link set dev $port master br1 done the CPU no longer sees packets which traverse sja1105 switch boundaries and can be forwarded directly by Felix. The br1 bridge would not be used for any sort of traffic termination. For this to work, we need to give drivers an opportunity to listen for bridging events on DSA trees other than their own, and pass that other tree index as argument. I have made the assumption, for the moment, that the other existing DSA notifiers don't need to be broadcast to other trees. That assumption might turn out to be incorrect. But in the meantime, introduce a dsa_broadcast function, similar in purpose to dsa_port_notify, which is used only by the bridging notifiers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:41 +00:00
err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_JOIN, &info);
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
/* The bridging is rolled back on error */
net: dsa: enable flooding for bridge ports Switches work by learning the MAC address for each attached station by monitoring traffic from each station. When a station sends a packet, the switch records which port the MAC address is connected to. With IPv4 networking, before communication commences with a neighbour, an ARP packet is broadcasted to all stations asking for the MAC address corresponding with the IPv4. The desired station responds with an ARP reply, and the ARP reply causes the switch to learn which port the station is connected to. With IPv6 networking, the situation is rather different. Rather than broadcasting ARP packets, a "neighbour solicitation" is multicasted rather than broadcasted. This multicast needs to reach the intended station in order for the neighbour to be discovered. Once a neighbour has been discovered, and entered into the sending stations neighbour cache, communication can restart at a point later without sending a new neighbour solicitation, even if the entry in the neighbour cache is marked as stale. This can be after the MAC address has expired from the forwarding cache of the DSA switch - when that occurs, there is a long pause in communication. Our DSA implementation for mv88e6xxx switches disables flooding of multicast and unicast frames for bridged ports. As per the above description, this is fine for IPv4 networking, since the broadcasted ARP queries will be sent to and received by all stations on the same network. However, this breaks IPv6 very badly - blocking neighbour solicitations and later causing connections to stall. The defaults that the Linux bridge code expect from bridges are for unknown unicast and unknown multicast frames to be flooded to all ports on the bridge, which is at odds to the defaults adopted by our DSA implementation for mv88e6xxx switches. This commit enables by default flooding of both unknown unicast and unknown multicast frames whenever a port is added to a bridge, and disables the flooding when a port leaves the bridge. This means that mv88e6xxx DSA switches now behave as per the bridge(8) man page, and IPv6 works flawlessly through such a switch. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:06 +00:00
if (err) {
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
dsa_port_change_brport_flags(dp, false);
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
dp->bridge_dev = NULL;
net: dsa: enable flooding for bridge ports Switches work by learning the MAC address for each attached station by monitoring traffic from each station. When a station sends a packet, the switch records which port the MAC address is connected to. With IPv4 networking, before communication commences with a neighbour, an ARP packet is broadcasted to all stations asking for the MAC address corresponding with the IPv4. The desired station responds with an ARP reply, and the ARP reply causes the switch to learn which port the station is connected to. With IPv6 networking, the situation is rather different. Rather than broadcasting ARP packets, a "neighbour solicitation" is multicasted rather than broadcasted. This multicast needs to reach the intended station in order for the neighbour to be discovered. Once a neighbour has been discovered, and entered into the sending stations neighbour cache, communication can restart at a point later without sending a new neighbour solicitation, even if the entry in the neighbour cache is marked as stale. This can be after the MAC address has expired from the forwarding cache of the DSA switch - when that occurs, there is a long pause in communication. Our DSA implementation for mv88e6xxx switches disables flooding of multicast and unicast frames for bridged ports. As per the above description, this is fine for IPv4 networking, since the broadcasted ARP queries will be sent to and received by all stations on the same network. However, this breaks IPv6 very badly - blocking neighbour solicitations and later causing connections to stall. The defaults that the Linux bridge code expect from bridges are for unknown unicast and unknown multicast frames to be flooded to all ports on the bridge, which is at odds to the defaults adopted by our DSA implementation for mv88e6xxx switches. This commit enables by default flooding of both unknown unicast and unknown multicast frames whenever a port is added to a bridge, and disables the flooding when a port leaves the bridge. This means that mv88e6xxx DSA switches now behave as per the bridge(8) man page, and IPv6 works flawlessly through such a switch. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:06 +00:00
}
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
return err;
}
void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br)
{
struct dsa_notifier_bridge_info info = {
net: dsa: permit cross-chip bridging between all trees in the system One way of utilizing DSA is by cascading switches which do not all have compatible taggers. Consider the following real-life topology: +---------------------------------------------------------------+ | LS1028A | | +------------------------------+ | | | DSA master for Felix | | | |(internal ENETC port 2: eno2))| | | +------------+------------------------------+-------------+ | | | Felix embedded L2 switch | | | | | | | | +--------------+ +--------------+ +--------------+ | | | | |DSA master for| |DSA master for| |DSA master for| | | | | | SJA1105 1 | | SJA1105 2 | | SJA1105 3 | | | | | |(Felix port 1)| |(Felix port 2)| |(Felix port 3)| | | +--+-+--------------+---+--------------+---+--------------+--+--+ +-----------------------+ +-----------------------+ +-----------------------+ | SJA1105 switch 1 | | SJA1105 switch 2 | | SJA1105 switch 3 | +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ |sw1p0|sw1p1|sw1p2|sw1p3| |sw2p0|sw2p1|sw2p2|sw2p3| |sw3p0|sw3p1|sw3p2|sw3p3| +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ The above can be described in the device tree as follows (obviously not complete): mscc_felix { dsa,member = <0 0>; ports { port@4 { ethernet = <&enetc_port2>; }; }; }; sja1105_switch1 { dsa,member = <1 1>; ports { port@4 { ethernet = <&mscc_felix_port1>; }; }; }; sja1105_switch2 { dsa,member = <2 2>; ports { port@4 { ethernet = <&mscc_felix_port2>; }; }; }; sja1105_switch3 { dsa,member = <3 3>; ports { port@4 { ethernet = <&mscc_felix_port3>; }; }; }; Basically we instantiate one DSA switch tree for every hardware switch in the system, but we still give them globally unique switch IDs (will come back to that later). Having 3 disjoint switch trees makes the tagger drivers "just work", because net devices are registered for the 3 Felix DSA master ports, and they are also DSA slave ports to the ENETC port. So packets received on the ENETC port are stripped of their stacked DSA tags one by one. Currently, hardware bridging between ports on the same sja1105 chip is possible, but switching between sja1105 ports on different chips is handled by the software bridge. This is fine, but we can do better. In fact, the dsa_8021q tag used by sja1105 is compatible with cascading. In other words, a sja1105 switch can correctly parse and route a packet containing a dsa_8021q tag. So if we could enable hardware bridging on the Felix DSA master ports, cross-chip bridging could be completely offloaded. Such as system would be used as follows: ip link add dev br0 type bridge && ip link set dev br0 up for port in sw0p0 sw0p1 sw0p2 sw0p3 \ sw1p0 sw1p1 sw1p2 sw1p3 \ sw2p0 sw2p1 sw2p2 sw2p3; do ip link set dev $port master br0 done The above makes switching between ports on the same row be performed in hardware, and between ports on different rows in software. Now assume the Felix switch ports are called swp0, swp1, swp2. By running the following extra commands: ip link add dev br1 type bridge && ip link set dev br1 up for port in swp0 swp1 swp2; do ip link set dev $port master br1 done the CPU no longer sees packets which traverse sja1105 switch boundaries and can be forwarded directly by Felix. The br1 bridge would not be used for any sort of traffic termination. For this to work, we need to give drivers an opportunity to listen for bridging events on DSA trees other than their own, and pass that other tree index as argument. I have made the assumption, for the moment, that the other existing DSA notifiers don't need to be broadcast to other trees. That assumption might turn out to be incorrect. But in the meantime, introduce a dsa_broadcast function, similar in purpose to dsa_port_notify, which is used only by the bridging notifiers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:41 +00:00
.tree_index = dp->ds->dst->index,
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
.sw_index = dp->ds->index,
.port = dp->index,
.br = br,
};
int err;
/* Here the port is already unbridged. Reflect the current configuration
* so that drivers can program their chips accordingly.
*/
dp->bridge_dev = NULL;
net: dsa: permit cross-chip bridging between all trees in the system One way of utilizing DSA is by cascading switches which do not all have compatible taggers. Consider the following real-life topology: +---------------------------------------------------------------+ | LS1028A | | +------------------------------+ | | | DSA master for Felix | | | |(internal ENETC port 2: eno2))| | | +------------+------------------------------+-------------+ | | | Felix embedded L2 switch | | | | | | | | +--------------+ +--------------+ +--------------+ | | | | |DSA master for| |DSA master for| |DSA master for| | | | | | SJA1105 1 | | SJA1105 2 | | SJA1105 3 | | | | | |(Felix port 1)| |(Felix port 2)| |(Felix port 3)| | | +--+-+--------------+---+--------------+---+--------------+--+--+ +-----------------------+ +-----------------------+ +-----------------------+ | SJA1105 switch 1 | | SJA1105 switch 2 | | SJA1105 switch 3 | +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ |sw1p0|sw1p1|sw1p2|sw1p3| |sw2p0|sw2p1|sw2p2|sw2p3| |sw3p0|sw3p1|sw3p2|sw3p3| +-----+-----+-----+-----+ +-----+-----+-----+-----+ +-----+-----+-----+-----+ The above can be described in the device tree as follows (obviously not complete): mscc_felix { dsa,member = <0 0>; ports { port@4 { ethernet = <&enetc_port2>; }; }; }; sja1105_switch1 { dsa,member = <1 1>; ports { port@4 { ethernet = <&mscc_felix_port1>; }; }; }; sja1105_switch2 { dsa,member = <2 2>; ports { port@4 { ethernet = <&mscc_felix_port2>; }; }; }; sja1105_switch3 { dsa,member = <3 3>; ports { port@4 { ethernet = <&mscc_felix_port3>; }; }; }; Basically we instantiate one DSA switch tree for every hardware switch in the system, but we still give them globally unique switch IDs (will come back to that later). Having 3 disjoint switch trees makes the tagger drivers "just work", because net devices are registered for the 3 Felix DSA master ports, and they are also DSA slave ports to the ENETC port. So packets received on the ENETC port are stripped of their stacked DSA tags one by one. Currently, hardware bridging between ports on the same sja1105 chip is possible, but switching between sja1105 ports on different chips is handled by the software bridge. This is fine, but we can do better. In fact, the dsa_8021q tag used by sja1105 is compatible with cascading. In other words, a sja1105 switch can correctly parse and route a packet containing a dsa_8021q tag. So if we could enable hardware bridging on the Felix DSA master ports, cross-chip bridging could be completely offloaded. Such as system would be used as follows: ip link add dev br0 type bridge && ip link set dev br0 up for port in sw0p0 sw0p1 sw0p2 sw0p3 \ sw1p0 sw1p1 sw1p2 sw1p3 \ sw2p0 sw2p1 sw2p2 sw2p3; do ip link set dev $port master br0 done The above makes switching between ports on the same row be performed in hardware, and between ports on different rows in software. Now assume the Felix switch ports are called swp0, swp1, swp2. By running the following extra commands: ip link add dev br1 type bridge && ip link set dev br1 up for port in swp0 swp1 swp2; do ip link set dev $port master br1 done the CPU no longer sees packets which traverse sja1105 switch boundaries and can be forwarded directly by Felix. The br1 bridge would not be used for any sort of traffic termination. For this to work, we need to give drivers an opportunity to listen for bridging events on DSA trees other than their own, and pass that other tree index as argument. I have made the assumption, for the moment, that the other existing DSA notifiers don't need to be broadcast to other trees. That assumption might turn out to be incorrect. But in the meantime, introduce a dsa_broadcast function, similar in purpose to dsa_port_notify, which is used only by the bridging notifiers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:41 +00:00
err = dsa_broadcast(DSA_NOTIFIER_BRIDGE_LEAVE, &info);
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
if (err)
pr_err("DSA: failed to notify DSA_NOTIFIER_BRIDGE_LEAVE\n");
net: dsa: configure better brport flags when ports leave the bridge For a DSA switch port operating in standalone mode, address learning doesn't make much sense since that is a bridge function. In fact, address learning even breaks setups such as this one: +---------------------------------------------+ | | | +-------------------+ | | | br0 | send receive | | +--------+-+--------+ +--------+ +--------+ | | | | | | | | | | | | | swp0 | | swp1 | | swp2 | | swp3 | | | | | | | | | | | | +-+--------+-+--------+-+--------+-+--------+-+ | ^ | ^ | | | | | +-----------+ | | | +--------------------------------+ because if the switch has a single FDB (can offload a single bridge) then source address learning on swp3 can "steal" the source MAC address of swp2 from br0's FDB, because learning frames coming from swp2 will be done twice: first on the swp1 ingress port, second on the swp3 ingress port. So the hardware FDB will become out of sync with the software bridge, and when swp2 tries to send one more packet towards swp1, the ASIC will attempt to short-circuit the forwarding path and send it directly to swp3 (since that's the last port it learned that address on), which it obviously can't, because swp3 operates in standalone mode. So DSA drivers operating in standalone mode should still configure a list of bridge port flags even when they are standalone. Currently DSA attempts to call dsa_port_bridge_flags with 0, which disables egress flooding of unknown unicast and multicast, something which doesn't make much sense. For the switches that implement .port_egress_floods - b53 and mv88e6xxx, it probably doesn't matter too much either, since they can possibly inject traffic from the CPU into a standalone port, regardless of MAC DA, even if egress flooding is turned off for that port, but certainly not all DSA switches can do that - sja1105, for example, can't. So it makes sense to use a better common default there, such as "flood everything". It should also be noted that what DSA calls "dsa_port_bridge_flags()" is a degenerate name for just calling .port_egress_floods(), since nothing else is implemented - not learning, in particular. But disabling address learning, something that this driver is also coding up for, will be supported by individual drivers once .port_egress_floods is replaced with a more generic .port_bridge_flags. Previous attempts to code up this logic have been in the common bridge layer, but as pointed out by Ido Schimmel, there are corner cases that are missed when doing that: https://patchwork.kernel.org/project/netdevbpf/patch/20210209151936.97382-5-olteanv@gmail.com/ So, at least for now, let's leave DSA in charge of setting port flags before and after the bridge join and leave. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:54 +00:00
/* Configure the port for standalone mode (no address learning,
* flood everything).
* The bridge only emits SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS events
* when the user requests it through netlink or sysfs, but not
* automatically at port join or leave, so we need to handle resetting
* the brport flags ourselves. But we even prefer it that way, because
* otherwise, some setups might never get the notification they need,
* for example, when a port leaves a LAG that offloads the bridge,
* it becomes standalone, but as far as the bridge is concerned, no
* port ever left.
*/
dsa_port_change_brport_flags(dp, false);
net: dsa: enable flooding for bridge ports Switches work by learning the MAC address for each attached station by monitoring traffic from each station. When a station sends a packet, the switch records which port the MAC address is connected to. With IPv4 networking, before communication commences with a neighbour, an ARP packet is broadcasted to all stations asking for the MAC address corresponding with the IPv4. The desired station responds with an ARP reply, and the ARP reply causes the switch to learn which port the station is connected to. With IPv6 networking, the situation is rather different. Rather than broadcasting ARP packets, a "neighbour solicitation" is multicasted rather than broadcasted. This multicast needs to reach the intended station in order for the neighbour to be discovered. Once a neighbour has been discovered, and entered into the sending stations neighbour cache, communication can restart at a point later without sending a new neighbour solicitation, even if the entry in the neighbour cache is marked as stale. This can be after the MAC address has expired from the forwarding cache of the DSA switch - when that occurs, there is a long pause in communication. Our DSA implementation for mv88e6xxx switches disables flooding of multicast and unicast frames for bridged ports. As per the above description, this is fine for IPv4 networking, since the broadcasted ARP queries will be sent to and received by all stations on the same network. However, this breaks IPv6 very badly - blocking neighbour solicitations and later causing connections to stall. The defaults that the Linux bridge code expect from bridges are for unknown unicast and unknown multicast frames to be flooded to all ports on the bridge, which is at odds to the defaults adopted by our DSA implementation for mv88e6xxx switches. This commit enables by default flooding of both unknown unicast and unknown multicast frames whenever a port is added to a bridge, and disables the flooding when a port leaves the bridge. This means that mv88e6xxx DSA switches now behave as per the bridge(8) man page, and IPv6 works flawlessly through such a switch. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:06 +00:00
net: dsa: move bridging routines Move the DSA port code which bridges a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:45 +00:00
/* Port left the bridge, put in BR_STATE_DISABLED by the bridge layer,
* so allow it to be in BR_STATE_FORWARDING to be kept functional
*/
dsa_port_set_state_now(dp, BR_STATE_FORWARDING);
}
net: dsa: move VLAN filtering setter Move the DSA port code which sets VLAN filtering on a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:46 +00:00
net: dsa: Link aggregation support Monitor the following events and notify the driver when: - A DSA port joins/leaves a LAG. - A LAG, made up of DSA ports, joins/leaves a bridge. - A DSA port in a LAG is enabled/disabled (enabled meaning "distributing" in 802.3ad LACP terms). When a LAG joins a bridge, the DSA subsystem will treat that as each individual port joining the bridge. The driver may look at the port's LAG device pointer to see if it is associated with any LAG, if that is required. This is analogue to how switchdev events are replicated out to all lower devices when reaching e.g. a LAG. Drivers can optionally request that DSA maintain a linear mapping from a LAG ID to the corresponding netdev by setting ds->num_lag_ids to the desired size. In the event that the hardware is not capable of offloading a particular LAG for any reason (the typical case being use of exotic modes like broadcast), DSA will take a hands-off approach, allowing the LAG to be formed as a pure software construct. This is reported back through the extended ACK, but is otherwise transparent to the user. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13 08:42:53 +00:00
int dsa_port_lag_change(struct dsa_port *dp,
struct netdev_lag_lower_state_info *linfo)
{
struct dsa_notifier_lag_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
};
bool tx_enabled;
if (!dp->lag_dev)
return 0;
/* On statically configured aggregates (e.g. loadbalance
* without LACP) ports will always be tx_enabled, even if the
* link is down. Thus we require both link_up and tx_enabled
* in order to include it in the tx set.
*/
tx_enabled = linfo->link_up && linfo->tx_enabled;
if (tx_enabled == dp->lag_tx_enabled)
return 0;
dp->lag_tx_enabled = tx_enabled;
return dsa_port_notify(dp, DSA_NOTIFIER_LAG_CHANGE, &info);
}
int dsa_port_lag_join(struct dsa_port *dp, struct net_device *lag,
struct netdev_lag_upper_info *uinfo)
{
struct dsa_notifier_lag_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.lag = lag,
.info = uinfo,
};
int err;
dsa_lag_map(dp->ds->dst, lag);
dp->lag_dev = lag;
err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_JOIN, &info);
if (err) {
dp->lag_dev = NULL;
dsa_lag_unmap(dp->ds->dst, lag);
}
return err;
}
void dsa_port_lag_leave(struct dsa_port *dp, struct net_device *lag)
{
struct dsa_notifier_lag_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.lag = lag,
};
int err;
if (!dp->lag_dev)
return;
/* Port might have been part of a LAG that in turn was
* attached to a bridge.
*/
if (dp->bridge_dev)
dsa_port_bridge_leave(dp, dp->bridge_dev);
dp->lag_tx_enabled = false;
dp->lag_dev = NULL;
err = dsa_port_notify(dp, DSA_NOTIFIER_LAG_LEAVE, &info);
if (err)
pr_err("DSA: failed to notify DSA_NOTIFIER_LAG_LEAVE: %d\n",
err);
dsa_lag_unmap(dp->ds->dst, lag);
}
net: dsa: allow 8021q uppers while the bridge has vlan_filtering=0 When the bridge has VLAN awareness disabled there isn't any duplication of functionality, since the bridge does not process VLAN. Don't deny adding 8021q uppers to DSA switch ports in that case. The switch is supposed to simply pass traffic leaving the VLAN tag as-is, and the stack will happily strip the VLAN tag for all 8021q uppers that exist. We need to ensure that there are no 8021q uppers when the user attempts to enable bridge vlan_filtering. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:28 +00:00
/* Must be called under rcu_read_lock() */
net: dsa: Be aware of switches where VLAN filtering is a global setting On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28 18:45:44 +00:00
static bool dsa_port_can_apply_vlan_filtering(struct dsa_port *dp,
bool vlan_filtering)
{
struct dsa_switch *ds = dp->ds;
net: dsa: allow 8021q uppers while the bridge has vlan_filtering=0 When the bridge has VLAN awareness disabled there isn't any duplication of functionality, since the bridge does not process VLAN. Don't deny adding 8021q uppers to DSA switch ports in that case. The switch is supposed to simply pass traffic leaving the VLAN tag as-is, and the stack will happily strip the VLAN tag for all 8021q uppers that exist. We need to ensure that there are no 8021q uppers when the user attempts to enable bridge vlan_filtering. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:28 +00:00
int err, i;
/* VLAN awareness was off, so the question is "can we turn it on".
* We may have had 8021q uppers, those need to go. Make sure we don't
* enter an inconsistent state: deny changing the VLAN awareness state
* as long as we have 8021q uppers.
*/
if (vlan_filtering && dsa_is_user_port(ds, dp->index)) {
struct net_device *upper_dev, *slave = dp->slave;
struct net_device *br = dp->bridge_dev;
struct list_head *iter;
netdev_for_each_upper_dev_rcu(slave, upper_dev, iter) {
struct bridge_vlan_info br_info;
u16 vid;
if (!is_vlan_dev(upper_dev))
continue;
vid = vlan_dev_vlan_id(upper_dev);
/* br_vlan_get_info() returns -EINVAL or -ENOENT if the
* device, respectively the VID is not found, returning
* 0 means success, which is a failure for us here.
*/
err = br_vlan_get_info(br, vid, &br_info);
if (err == 0) {
dev_err(ds->dev, "Must remove upper %s first\n",
upper_dev->name);
return false;
}
}
}
net: dsa: Be aware of switches where VLAN filtering is a global setting On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28 18:45:44 +00:00
if (!ds->vlan_filtering_is_global)
return true;
/* For cases where enabling/disabling VLAN awareness is global to the
* switch, we need to handle the case where multiple bridges span
* different ports of the same switch device and one of them has a
* different setting than what is being requested.
*/
for (i = 0; i < ds->num_ports; i++) {
struct net_device *other_bridge;
other_bridge = dsa_to_port(ds, i)->bridge_dev;
if (!other_bridge)
continue;
/* If it's the same bridge, it also has same
* vlan_filtering setting => no need to check
*/
if (other_bridge == dp->bridge_dev)
continue;
if (br_vlan_enabled(other_bridge) != vlan_filtering) {
dev_err(ds->dev, "VLAN filtering is a global setting\n");
return false;
}
}
return true;
}
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering)
net: dsa: move VLAN filtering setter Move the DSA port code which sets VLAN filtering on a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:46 +00:00
{
struct dsa_switch *ds = dp->ds;
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
bool apply;
net: dsa: Store vlan_filtering as a property of dsa_port This allows drivers to query the VLAN setting imposed by the bridge driver directly from DSA, instead of keeping their own state based on the .port_vlan_filtering callback. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28 18:45:43 +00:00
int err;
net: dsa: move VLAN filtering setter Move the DSA port code which sets VLAN filtering on a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:46 +00:00
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
if (!ds->ops->port_vlan_filtering)
return -EOPNOTSUPP;
net: dsa: allow 8021q uppers while the bridge has vlan_filtering=0 When the bridge has VLAN awareness disabled there isn't any duplication of functionality, since the bridge does not process VLAN. Don't deny adding 8021q uppers to DSA switch ports in that case. The switch is supposed to simply pass traffic leaving the VLAN tag as-is, and the stack will happily strip the VLAN tag for all 8021q uppers that exist. We need to ensure that there are no 8021q uppers when the user attempts to enable bridge vlan_filtering. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21 00:10:28 +00:00
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
/* We are called from dsa_slave_switchdev_blocking_event(),
* which is not under rcu_read_lock(), unlike
* dsa_slave_switchdev_event().
*/
rcu_read_lock();
apply = dsa_port_can_apply_vlan_filtering(dp, vlan_filtering);
rcu_read_unlock();
if (!apply)
return -EINVAL;
net: dsa: Be aware of switches where VLAN filtering is a global setting On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28 18:45:44 +00:00
net: dsa: Skip calling .port_vlan_filtering on no change Even if VLAN filtering is global, DSA will call this callback once per each port. Drivers should not have to compare the global state with the requested change. So let DSA do it. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28 18:45:51 +00:00
if (dsa_port_is_vlan_filtering(dp) == vlan_filtering)
return 0;
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
err = ds->ops->port_vlan_filtering(ds, dp->index, vlan_filtering);
net: dsa: Be aware of switches where VLAN filtering is a global setting On some switches, the action of whether to parse VLAN frame headers and use that information for ingress admission is configurable, but not per port. Such is the case for the Broadcom BCM53xx and the NXP SJA1105 families, for example. In that case, DSA can prevent the bridge core from trying to apply different VLAN filtering settings on net devices that belong to the same switch. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-28 18:45:44 +00:00
if (err)
return err;
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
if (ds->vlan_filtering_is_global)
ds->vlan_filtering = vlan_filtering;
else
dp->vlan_filtering = vlan_filtering;
net: dsa: propagate switchdev vlan_filtering prepare phase to drivers A driver may refuse to enable VLAN filtering for any reason beyond what the DSA framework cares about, such as: - having tc-flower rules that rely on the switch being VLAN-aware - the particular switch does not support VLAN, even if the driver does (the DSA framework just checks for the presence of the .port_vlan_add and .port_vlan_del pointers) - simply not supporting this configuration to be toggled at runtime Currently, when a driver rejects a configuration it cannot support, it does this from the commit phase, which triggers various warnings in switchdev. So propagate the prepare phase to drivers, to give them the ability to refuse invalid configurations cleanly and avoid the warnings. Since we need to modify all function prototypes and check for the prepare phase from within the drivers, take that opportunity and move the existing driver restrictions within the prepare phase where that is possible and easy. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Landen Chao <Landen.Chao@mediatek.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02 22:06:46 +00:00
net: dsa: move VLAN filtering setter Move the DSA port code which sets VLAN filtering on a port in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:46 +00:00
return 0;
}
net: dsa: move ageing time setter Move the DSA port code which sets a port ageing time in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:47 +00:00
net: dsa: provide an option for drivers to always receive bridge VLANs DSA assumes that a bridge which has vlan filtering disabled is not vlan aware, and ignores all vlan configuration. However, the kernel software bridge code allows configuration in this state. This causes the kernel's idea of the bridge vlan state and the hardware state to disagree, so "bridge vlan show" indicates a correct configuration but the hardware lacks all configuration. Even worse, enabling vlan filtering on a DSA bridge immediately blocks all traffic which, given the output of "bridge vlan show", is very confusing. Provide an option that drivers can set to indicate they want to receive vlan configuration even when vlan filtering is disabled. At the very least, this is safe for Marvell DSA bridges, which do not look up ingress traffic in the VTU if the port is in 8021Q disabled state. It is also safe for the Ocelot switch family. Whether this change is suitable for all DSA bridges is not known. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-12 17:20:25 +00:00
/* This enforces legacy behavior for switch drivers which assume they can't
* receive VLAN configuration when enslaved to a bridge with vlan_filtering=0
*/
bool dsa_port_skip_vlan_configuration(struct dsa_port *dp)
{
struct dsa_switch *ds = dp->ds;
if (!dp->bridge_dev)
return false;
return (!ds->configure_vlan_while_not_filtering &&
!br_vlan_enabled(dp->bridge_dev));
}
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock)
net: dsa: move ageing time setter Move the DSA port code which sets a port ageing time in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:47 +00:00
{
unsigned long ageing_jiffies = clock_t_to_jiffies(ageing_clock);
unsigned int ageing_time = jiffies_to_msecs(ageing_jiffies);
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
struct dsa_notifier_ageing_time_info info;
int err;
info.ageing_time = ageing_time;
net: dsa: move ageing time setter Move the DSA port code which sets a port ageing time in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:47 +00:00
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
err = dsa_port_notify(dp, DSA_NOTIFIER_AGEING_TIME, &info);
if (err)
return err;
net: dsa: move ageing time setter Move the DSA port code which sets a port ageing time in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:47 +00:00
dp->ageing_time = ageing_time;
net: dsa: remove the transactional logic from ageing time notifiers Remove the shim introduced in DSA for offloading the bridge ageing time from switchdev, by first checking whether the ageing time is within the range limits requested by the driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:51 +00:00
return 0;
net: dsa: move ageing time setter Move the DSA port code which sets a port ageing time in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:47 +00:00
}
net: dsa: move FDB handlers Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:48 +00:00
net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:55 +00:00
int dsa_port_pre_bridge_flags(const struct dsa_port *dp,
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack)
net: dsa: Add setter for SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS In preparation for removing SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT, add support for a function that processes the SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attributes and returns not supported for any flag set, since DSA does not currently support toggling those bridge port attributes (yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 00:58:22 +00:00
{
struct dsa_switch *ds = dp->ds;
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
if (!ds->ops->port_pre_bridge_flags)
net: dsa: Add setter for SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS In preparation for removing SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT, add support for a function that processes the SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attributes and returns not supported for any flag set, since DSA does not currently support toggling those bridge port attributes (yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 00:58:22 +00:00
return -EINVAL;
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
return ds->ops->port_pre_bridge_flags(ds, dp->index, flags, extack);
net: dsa: Add setter for SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS In preparation for removing SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT, add support for a function that processes the SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS attributes and returns not supported for any flag set, since DSA does not currently support toggling those bridge port attributes (yet). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21 00:58:22 +00:00
}
net: switchdev: pass flags and mask to both {PRE_,}BRIDGE_FLAGS attributes This switchdev attribute offers a counterproductive API for a driver writer, because although br_switchdev_set_port_flag gets passed a "flags" and a "mask", those are passed piecemeal to the driver, so while the PRE_BRIDGE_FLAGS listener knows what changed because it has the "mask", the BRIDGE_FLAGS listener doesn't, because it only has the final value. But certain drivers can offload only certain combinations of settings, like for example they cannot change unicast flooding independently of multicast flooding - they must be both on or both off. The way the information is passed to switchdev makes drivers not expressive enough, and unable to reject this request ahead of time, in the PRE_BRIDGE_FLAGS notifier, so they are forced to reject it during the deferred BRIDGE_FLAGS attribute, where the rejection is currently ignored. This patch also changes drivers to make use of the "mask" field for edge detection when possible. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:55 +00:00
int dsa_port_bridge_flags(const struct dsa_port *dp,
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack)
net: dsa: add support for bridge flags The Linux bridge implementation allows various properties of the bridge to be controlled, such as flooding unknown unicast and multicast frames. This patch adds the necessary DSA infrastructure to allow the Linux bridge support to control these properties for DSA switches. Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [florian: Add missing dp and ds variables declaration to fix build] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:04 +00:00
{
struct dsa_switch *ds = dp->ds;
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
if (!ds->ops->port_bridge_flags)
return -EINVAL;
net: dsa: add support for bridge flags The Linux bridge implementation allows various properties of the bridge to be controlled, such as flooding unknown unicast and multicast frames. This patch adds the necessary DSA infrastructure to allow the Linux bridge support to control these properties for DSA switches. Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [florian: Add missing dp and ds variables declaration to fix build] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:04 +00:00
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
return ds->ops->port_bridge_flags(ds, dp->index, flags, extack);
net: dsa: add support for bridge flags The Linux bridge implementation allows various properties of the bridge to be controlled, such as flooding unknown unicast and multicast frames. This patch adds the necessary DSA infrastructure to allow the Linux bridge support to control these properties for DSA switches. Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [florian: Add missing dp and ds variables declaration to fix build] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20 23:35:04 +00:00
}
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
int dsa_port_mrouter(struct dsa_port *dp, bool mrouter,
struct netlink_ext_ack *extack)
net: dsa: add support for BRIDGE_MROUTER attribute This patch adds support for enabling or disabling the flooding of unknown multicast traffic on the CPU ports, depending on the value of the switchdev SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute. The current behavior is kept unchanged but a user can now prevent the CPU conduit to be flooded with a lot of unregistered traffic that the network stack needs to filter in software with e.g.: echo 0 > /sys/class/net/br0/multicast_router Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 03:31:13 +00:00
{
struct dsa_switch *ds = dp->ds;
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
if (!ds->ops->port_set_mrouter)
net: switchdev: remove the transaction structure from port attributes Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:50 +00:00
return -EOPNOTSUPP;
net: dsa: add support for BRIDGE_MROUTER attribute This patch adds support for enabling or disabling the flooding of unknown multicast traffic on the CPU ports, depending on the value of the switchdev SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute. The current behavior is kept unchanged but a user can now prevent the CPU conduit to be flooded with a lot of unregistered traffic that the network stack needs to filter in software with e.g.: echo 0 > /sys/class/net/br0/multicast_router Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 03:31:13 +00:00
net: dsa: act as passthrough for bridge port flags There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be expressed by the bridge through switchdev, and not all of them can be emulated by DSA mid-layer API at the same time. One possible configuration is when the bridge offloads the port flags using a mask that has a single bit set - therefore only one feature should change. However, DSA currently groups together unicast and multicast flooding in the .port_egress_floods method, which limits our options when we try to add support for turning off broadcast flooding: do we extend .port_egress_floods with a third parameter which b53 and mv88e6xxx will ignore? But that means that the DSA layer, which currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will see that .port_egress_floods is implemented, and will report that all 3 types of flooding are supported - not necessarily true. Another configuration is when the user specifies more than one flag at the same time, in the same netlink message. If we were to create one individual function per offloadable bridge port flag, we would limit the expressiveness of the switch driver of refusing certain combinations of flag values. For example, a switch may not have an explicit knob for flooding of unknown multicast, just for flooding in general. In that case, the only correct thing to do is to allow changes to BR_FLOOD and BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having a separate .port_set_unicast_flood and .port_set_multicast_flood would not allow the driver to possibly reject that. Also, DSA doesn't consider it necessary to inform the driver that a SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it just calls .port_egress_floods for the CPU port. When we'll add support for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real problem because the flood settings will need to be held statefully in the DSA middle layer, otherwise changing the mrouter port attribute will impact the flooding attribute. And that's _assuming_ that the underlying hardware doesn't have anything else to do when a multicast router attaches to a port than flood unknown traffic to it. If it does, there will need to be a dedicated .port_set_mrouter anyway. So we need to let the DSA drivers see the exact form that the bridge passes this switchdev attribute in, otherwise we are standing in the way. Therefore we also need to use this form of language when communicating to the driver that it needs to configure its initial (before bridge join) and final (after bridge leave) port flags. The b53 and mv88e6xxx drivers are converted to the passthrough API and their implementation of .port_egress_floods is split into two: a function that configures unicast flooding and another for multicast. The mv88e6xxx implementation is quite hairy, and it turns out that the implementations of unknown unicast flooding are actually the same for 6185 and for 6352: behind the confusing names actually lie two individual bits: NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2) NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3) so there was no reason to entangle them in the first place. Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of PORT_CTL0, which has the exact same bit index. I have left the implementations separate though, for the only reason that the names are different enough to confuse me, since I am not able to double-check with a user manual. The multicast flooding setting for 6185 is in a different register than for 6352 though. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 15:15:56 +00:00
return ds->ops->port_set_mrouter(ds, dp->index, mrouter, extack);
net: dsa: add support for BRIDGE_MROUTER attribute This patch adds support for enabling or disabling the flooding of unknown multicast traffic on the CPU ports, depending on the value of the switchdev SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute. The current behavior is kept unchanged but a user can now prevent the CPU conduit to be flooded with a lot of unregistered traffic that the network stack needs to filter in software with e.g.: echo 0 > /sys/class/net/br0/multicast_router Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09 03:31:13 +00:00
}
net: dsa: configure the MTU for switch ports It is useful be able to configure port policers on a switch to accept frames of various sizes: - Increase the MTU for better throughput from the default of 1500 if it is known that there is no 10/100 Mbps device in the network. - Decrease the MTU to limit the latency of high-priority frames under congestion, or work around various network segments that add extra headers to packets which can't be fragmented. For DSA slave ports, this is mostly a pass-through callback, called through the regular ndo ops and at probe time (to ensure consistency across all supported switches). The CPU port is called with an MTU equal to the largest configured MTU of the slave ports. The assumption is that the user might want to sustain a bidirectional conversation with a partner over any switch port. The DSA master is configured the same as the CPU port, plus the tagger overhead. Since the MTU is by definition L2 payload (sans Ethernet header), it is up to each individual driver to figure out if it needs to do anything special for its frame tags on the CPU port (it shouldn't except in special cases). So the MTU does not contain the tagger overhead on the CPU port. However the MTU of the DSA master, minus the tagger overhead, is used as a proxy for the MTU of the CPU port, which does not have a net device. This is to avoid uselessly calling the .change_mtu function on the CPU port when nothing should change. So it is safe to assume that the DSA master and the CPU port MTUs are apart by exactly the tagger's overhead in bytes. Some changes were made around dsa_master_set_mtu(), function which was now removed, for 2 reasons: - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to do the same thing in DSA - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method That is to say, there's no need for this function in DSA, we can safely call dev_set_mtu() directly, take the rtnl lock when necessary, and just propagate whatever errors get reported (since the user probably wants to be informed). Some inspiration (mainly in the MTU DSA notifier) was taken from a vaguely similar patch from Murali and Florian, who are credited as co-developers down below. Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Co-developed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 19:55:42 +00:00
int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
bool propagate_upstream)
{
struct dsa_notifier_mtu_info info = {
.sw_index = dp->ds->index,
.propagate_upstream = propagate_upstream,
.port = dp->index,
.mtu = new_mtu,
};
return dsa_port_notify(dp, DSA_NOTIFIER_MTU, &info);
}
net: dsa: Remove switchdev dependency from DSA switch notifier chain Currently, the switchdev objects are embedded inside the DSA notifier info. This patch removes this dependency. This is done as a preparation stage before adding support for learning FDB through the switchdev notification chain. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:41 +00:00
int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
u16 vid)
net: dsa: move FDB handlers Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:48 +00:00
{
net: dsa: add FDB notifier Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:53 +00:00
struct dsa_notifier_fdb_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
net: dsa: Remove switchdev dependency from DSA switch notifier chain Currently, the switchdev objects are embedded inside the DSA notifier info. This patch removes this dependency. This is done as a preparation stage before adding support for learning FDB through the switchdev notification chain. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:41 +00:00
.addr = addr,
.vid = vid,
net: dsa: add FDB notifier Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:53 +00:00
};
net: dsa: move FDB handlers Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:48 +00:00
net: dsa: add FDB notifier Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:53 +00:00
return dsa_port_notify(dp, DSA_NOTIFIER_FDB_ADD, &info);
net: dsa: move FDB handlers Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:48 +00:00
}
net: dsa: Remove switchdev dependency from DSA switch notifier chain Currently, the switchdev objects are embedded inside the DSA notifier info. This patch removes this dependency. This is done as a preparation stage before adding support for learning FDB through the switchdev notification chain. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:41 +00:00
int dsa_port_fdb_del(struct dsa_port *dp, const unsigned char *addr,
u16 vid)
net: dsa: move FDB handlers Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:48 +00:00
{
net: dsa: add FDB notifier Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:53 +00:00
struct dsa_notifier_fdb_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
net: dsa: Remove switchdev dependency from DSA switch notifier chain Currently, the switchdev objects are embedded inside the DSA notifier info. This patch removes this dependency. This is done as a preparation stage before adding support for learning FDB through the switchdev notification chain. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-06 13:15:41 +00:00
.addr = addr,
.vid = vid,
net: dsa: add FDB notifier Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:53 +00:00
};
net: dsa: move FDB handlers Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:48 +00:00
net: dsa: add FDB notifier Add two new DSA_NOTIFIER_FDB_ADD and DSA_NOTIFIER_FDB_DEL events to notify not only a single switch, but all switches of a the fabric when an FDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:53 +00:00
return dsa_port_notify(dp, DSA_NOTIFIER_FDB_DEL, &info);
net: dsa: move FDB handlers Move the DSA port code which handles FDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:48 +00:00
}
net: dsa: add port fdb dump Dumping a DSA port's FDB entries is not specific to a DSA slave, so add a dsa_port_fdb_dump function, similarly to dsa_port_fdb_add and dsa_port_fdb_del. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20 23:32:14 +00:00
int dsa_port_fdb_dump(struct dsa_port *dp, dsa_fdb_dump_cb_t *cb, void *data)
{
struct dsa_switch *ds = dp->ds;
int port = dp->index;
if (!ds->ops->port_fdb_dump)
return -EOPNOTSUPP;
return ds->ops->port_fdb_dump(ds, port, cb, data);
}
net: dsa: add more const attributes The notify mechanism does not need to modify the port it is notifying. So make the parameter const. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 22:11:01 +00:00
int dsa_port_mdb_add(const struct dsa_port *dp,
net: switchdev: remove the transaction structure from port object notifiers Since the introduction of the switchdev API, port objects were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port object notifier structures, and converts drivers to not look at this member. Where driver conversion is trivial (like in the case of the Marvell Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is done in this patch. Where driver conversion needs more attention (DSA, Mellanox Spectrum), the conversion is left for subsequent patches and here we only fake the prepare/commit phases at a lower level, just not in the switchdev notifier itself. Where the code has a natural structure that is best left alone as a preparation and a commit phase (as in the case of the Ocelot switch), that structure is left in place, just made to not depend upon the switchdev transactional model. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:48 +00:00
const struct switchdev_obj_port_mdb *mdb)
net: dsa: move MDB handlers Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:49 +00:00
{
net: dsa: add MDB notifier Add two new DSA_NOTIFIER_MDB_ADD and DSA_NOTIFIER_MDB_DEL events to notify not only a single switch, but all switches of a the fabric when an MDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:54 +00:00
struct dsa_notifier_mdb_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.mdb = mdb,
};
net: dsa: move MDB handlers Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:49 +00:00
net: dsa: add MDB notifier Add two new DSA_NOTIFIER_MDB_ADD and DSA_NOTIFIER_MDB_DEL events to notify not only a single switch, but all switches of a the fabric when an MDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:54 +00:00
return dsa_port_notify(dp, DSA_NOTIFIER_MDB_ADD, &info);
net: dsa: move MDB handlers Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:49 +00:00
}
net: dsa: add more const attributes The notify mechanism does not need to modify the port it is notifying. So make the parameter const. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09 22:11:01 +00:00
int dsa_port_mdb_del(const struct dsa_port *dp,
net: dsa: move MDB handlers Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:49 +00:00
const struct switchdev_obj_port_mdb *mdb)
{
net: dsa: add MDB notifier Add two new DSA_NOTIFIER_MDB_ADD and DSA_NOTIFIER_MDB_DEL events to notify not only a single switch, but all switches of a the fabric when an MDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:54 +00:00
struct dsa_notifier_mdb_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.mdb = mdb,
};
net: dsa: move MDB handlers Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:49 +00:00
net: dsa: add MDB notifier Add two new DSA_NOTIFIER_MDB_ADD and DSA_NOTIFIER_MDB_DEL events to notify not only a single switch, but all switches of a the fabric when an MDB entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:54 +00:00
return dsa_port_notify(dp, DSA_NOTIFIER_MDB_DEL, &info);
net: dsa: move MDB handlers Move the DSA port code which handles MDB objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:49 +00:00
}
net: dsa: move VLAN handlers Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:50 +00:00
int dsa_port_vlan_add(struct dsa_port *dp,
net: switchdev: remove the transaction structure from port object notifiers Since the introduction of the switchdev API, port objects were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port object notifier structures, and converts drivers to not look at this member. Where driver conversion is trivial (like in the case of the Marvell Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is done in this patch. Where driver conversion needs more attention (DSA, Mellanox Spectrum), the conversion is left for subsequent patches and here we only fake the prepare/commit phases at a lower level, just not in the switchdev notifier itself. Where the code has a natural structure that is best left alone as a preparation and a commit phase (as in the case of the Ocelot switch), that structure is left in place, just made to not depend upon the switchdev transactional model. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09 00:01:48 +00:00
const struct switchdev_obj_port_vlan *vlan)
net: dsa: move VLAN handlers Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:50 +00:00
{
net: dsa: add VLAN notifier Add two new DSA_NOTIFIER_VLAN_ADD and DSA_NOTIFIER_VLAN_DEL events to notify not only a single switch, but all switches of a the fabric when an VLAN entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:55 +00:00
struct dsa_notifier_vlan_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.vlan = vlan,
};
net: dsa: move VLAN handlers Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:50 +00:00
net: dsa: check bridge VLAN in slave operations The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is not bridged or if its bridge is not VLAN aware. This is a good thing but other corners of DSA, such as the tag_8021q driver, may need to program VLANs regardless the bridge state. And also because bridge_dev is specific to user ports anyway, move these checks were it belongs, one layer up in the slave code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:18 +00:00
return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_ADD, &info);
net: dsa: move VLAN handlers Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:50 +00:00
}
int dsa_port_vlan_del(struct dsa_port *dp,
const struct switchdev_obj_port_vlan *vlan)
{
net: dsa: add VLAN notifier Add two new DSA_NOTIFIER_VLAN_ADD and DSA_NOTIFIER_VLAN_DEL events to notify not only a single switch, but all switches of a the fabric when an VLAN entry is added or removed. For the moment, keep the current behavior and ignore other switches. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:55 +00:00
struct dsa_notifier_vlan_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.vlan = vlan,
};
net: dsa: move VLAN handlers Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:50 +00:00
net: dsa: check bridge VLAN in slave operations The bridge VLANs are not offloaded by dsa_port_vlan_* if the port is not bridged or if its bridge is not VLAN aware. This is a good thing but other corners of DSA, such as the tag_8021q driver, may need to program VLANs regardless the bridge state. And also because bridge_dev is specific to user ports anyway, move these checks were it belongs, one layer up in the slave code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25 17:25:18 +00:00
return dsa_port_notify(dp, DSA_NOTIFIER_VLAN_DEL, &info);
net: dsa: move VLAN handlers Move the DSA port code which handles VLAN objects in port.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-19 21:00:50 +00:00
}
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29 01:00:06 +00:00
void dsa_port_set_tag_protocol(struct dsa_port *cpu_dp,
const struct dsa_device_ops *tag_ops)
{
cpu_dp->filter = tag_ops->filter;
cpu_dp->rcv = tag_ops->rcv;
cpu_dp->tag_ops = tag_ops;
}
net: dsa: Add helper function to obtain PHY device of a given port In preparation for having more call sites attempting to obtain a reference against a PHY device corresponding to a particular port, introduce a helper function for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:51 +00:00
static struct phy_device *dsa_port_get_phy_device(struct dsa_port *dp)
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
{
struct device_node *phy_dn;
struct phy_device *phydev;
net: dsa: Add helper function to obtain PHY device of a given port In preparation for having more call sites attempting to obtain a reference against a PHY device corresponding to a particular port, introduce a helper function for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:51 +00:00
phy_dn = of_parse_phandle(dp->dn, "phy-handle", 0);
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
if (!phy_dn)
net: dsa: Add helper function to obtain PHY device of a given port In preparation for having more call sites attempting to obtain a reference against a PHY device corresponding to a particular port, introduce a helper function for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:51 +00:00
return NULL;
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
phydev = of_phy_find_device(phy_dn);
if (!phydev) {
net: dsa: Add helper function to obtain PHY device of a given port In preparation for having more call sites attempting to obtain a reference against a PHY device corresponding to a particular port, introduce a helper function for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:51 +00:00
of_node_put(phy_dn);
return ERR_PTR(-EPROBE_DEFER);
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
}
net: dsa: fix a leaked reference by adding missing of_node_put The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./net/dsa/port.c:294:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 284, but without a corresponding object release within this function. ./net/dsa/dsa2.c:627:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:630:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:636:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. ./net/dsa/dsa2.c:639:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 618, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-25 07:22:19 +00:00
of_node_put(phy_dn);
net: dsa: Add helper function to obtain PHY device of a given port In preparation for having more call sites attempting to obtain a reference against a PHY device corresponding to a particular port, introduce a helper function for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:51 +00:00
return phydev;
}
net: dsa: Make PHYLINK related function static again Commit 77373d49de22 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 18:32:47 +00:00
static void dsa_port_phylink_validate(struct phylink_config *config,
unsigned long *supported,
struct phylink_link_state *state)
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
if (!ds->ops->phylink_validate)
return;
ds->ops->phylink_validate(ds, dp->index, supported, state);
}
net: dsa: Make PHYLINK related function static again Commit 77373d49de22 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 18:32:47 +00:00
static void dsa_port_phylink_mac_pcs_get_state(struct phylink_config *config,
struct phylink_link_state *state)
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
net: dsa: warn if phylink_mac_link_state returns error Issue a warning to the kernel log if phylink_mac_link_state() returns an error. This should not occur, but let's make it visible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 10:15:28 +00:00
int err;
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
net: phylink: rename mac_link_state() op to mac_pcs_get_state() Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-21 00:36:22 +00:00
/* Only called for inband modes */
if (!ds->ops->phylink_mac_link_state) {
state->link = 0;
return;
}
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
net: dsa: warn if phylink_mac_link_state returns error Issue a warning to the kernel log if phylink_mac_link_state() returns an error. This should not occur, but let's make it visible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 10:15:28 +00:00
err = ds->ops->phylink_mac_link_state(ds, dp->index, state);
if (err < 0) {
dev_err(ds->dev, "p%d: phylink_mac_link_state() failed: %d\n",
dp->index, err);
net: phylink: rename mac_link_state() op to mac_pcs_get_state() Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-21 00:36:22 +00:00
state->link = 0;
net: dsa: warn if phylink_mac_link_state returns error Issue a warning to the kernel log if phylink_mac_link_state() returns an error. This should not occur, but let's make it visible. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14 10:15:28 +00:00
}
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
}
net: dsa: Make PHYLINK related function static again Commit 77373d49de22 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 18:32:47 +00:00
static void dsa_port_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state)
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
if (!ds->ops->phylink_mac_config)
return;
ds->ops->phylink_mac_config(ds, dp->index, mode, state);
}
net: dsa: Make PHYLINK related function static again Commit 77373d49de22 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 18:32:47 +00:00
static void dsa_port_phylink_mac_an_restart(struct phylink_config *config)
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
if (!ds->ops->phylink_mac_an_restart)
return;
ds->ops->phylink_mac_an_restart(ds, dp->index);
}
net: dsa: Make PHYLINK related function static again Commit 77373d49de22 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 18:32:47 +00:00
static void dsa_port_phylink_mac_link_down(struct phylink_config *config,
unsigned int mode,
phy_interface_t interface)
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
struct phy_device *phydev = NULL;
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
if (dsa_is_user_port(ds, dp->index))
phydev = dp->slave->phydev;
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
if (!ds->ops->phylink_mac_link_down) {
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
if (ds->ops->adjust_link && phydev)
ds->ops->adjust_link(ds, dp->index, phydev);
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
return;
}
ds->ops->phylink_mac_link_down(ds, dp->index, mode, interface);
}
net: dsa: Make PHYLINK related function static again Commit 77373d49de22 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 18:32:47 +00:00
static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
net: phylink: propagate resolved link config via mac_link_up() Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. We propagate the link parameters via function arguments so that inappropriate members of struct phylink_link_state can't be accessed, and creating a new structure just for this adds needless complexity to the API. Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 10:23:41 +00:00
struct phy_device *phydev,
net: dsa: Make PHYLINK related function static again Commit 77373d49de22 ("net: dsa: Move the phylink driver calls into port.c") moved and exported a bunch of symbols, but they are not used outside of net/dsa/port.c at the moment, so no reason to export them. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16 18:32:47 +00:00
unsigned int mode,
phy_interface_t interface,
net: phylink: propagate resolved link config via mac_link_up() Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. We propagate the link parameters via function arguments so that inappropriate members of struct phylink_link_state can't be accessed, and creating a new structure just for this adds needless complexity to the API. Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 10:23:41 +00:00
int speed, int duplex,
bool tx_pause, bool rx_pause)
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
if (!ds->ops->phylink_mac_link_up) {
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
if (ds->ops->adjust_link && phydev)
ds->ops->adjust_link(ds, dp->index, phydev);
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
return;
}
net: dsa: propagate resolved link config via mac_link_up() Propagate the resolved link configuration down via DSA's phylink_mac_link_up() operation to allow split PCS/MAC to work. Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 10:23:46 +00:00
ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev,
speed, duplex, tx_pause, rx_pause);
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
}
const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
.validate = dsa_port_phylink_validate,
net: phylink: rename mac_link_state() op to mac_pcs_get_state() Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-21 00:36:22 +00:00
.mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state,
net: dsa: Move the phylink driver calls into port.c In order to have a common handling of PHYLINK for the slave and non-user ports, the DSA core glue logic (between PHYLINK and the driver) must use an API that does not rely on a struct net_device. These will also be called by the CPU-port-handling code in a further patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:15 +00:00
.mac_config = dsa_port_phylink_mac_config,
.mac_an_restart = dsa_port_phylink_mac_an_restart,
.mac_link_down = dsa_port_phylink_mac_link_down,
.mac_link_up = dsa_port_phylink_mac_link_up,
};
net: dsa: Add helper function to obtain PHY device of a given port In preparation for having more call sites attempting to obtain a reference against a PHY device corresponding to a particular port, introduce a helper function for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:51 +00:00
static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
{
struct dsa_switch *ds = dp->ds;
struct phy_device *phydev;
int port = dp->index;
int err = 0;
phydev = dsa_port_get_phy_device(dp);
if (!phydev)
return 0;
if (IS_ERR(phydev))
return PTR_ERR(phydev);
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
if (enable) {
err = genphy_resume(phydev);
if (err < 0)
goto err_put_dev;
err = genphy_read_status(phydev);
if (err < 0)
goto err_put_dev;
} else {
err = genphy_suspend(phydev);
if (err < 0)
goto err_put_dev;
}
if (ds->ops->adjust_link)
ds->ops->adjust_link(ds, port, phydev);
dev_dbg(ds->dev, "enabled port's phy: %s", phydev_name(phydev));
err_put_dev:
put_device(&phydev->mdio.dev);
return err;
}
static int dsa_port_fixed_link_register_of(struct dsa_port *dp)
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
{
struct device_node *dn = dp->dn;
struct dsa_switch *ds = dp->ds;
struct phy_device *phydev;
int port = dp->index;
net: of_get_phy_mode: Change API to solve int/unit warnings Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04 01:40:33 +00:00
phy_interface_t mode;
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
int err;
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
err = of_phy_register_fixed_link(dn);
if (err) {
dev_err(ds->dev,
"failed to register the fixed PHY of port %d\n",
port);
return err;
}
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
phydev = of_phy_find_device(dn);
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
net: of_get_phy_mode: Change API to solve int/unit warnings Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04 01:40:33 +00:00
err = of_get_phy_mode(dn, &mode);
if (err)
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
mode = PHY_INTERFACE_MODE_NA;
phydev->interface = mode;
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
genphy_read_status(phydev);
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
if (ds->ops->adjust_link)
ds->ops->adjust_link(ds, port, phydev);
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
put_device(&phydev->mdio.dev);
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
return 0;
}
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
static int dsa_port_phylink_register(struct dsa_port *dp)
{
struct dsa_switch *ds = dp->ds;
struct device_node *port_dn = dp->dn;
net: of_get_phy_mode: Change API to solve int/unit warnings Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04 01:40:33 +00:00
phy_interface_t mode;
int err;
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
net: of_get_phy_mode: Change API to solve int/unit warnings Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04 01:40:33 +00:00
err = of_get_phy_mode(port_dn, &mode);
if (err)
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
mode = PHY_INTERFACE_MODE_NA;
dp->pl_config.dev = ds->dev;
dp->pl_config.type = PHYLINK_DEV;
net: dsa: Pass pcs_poll flag from driver to PHYLINK The DSA drivers that implement .phylink_mac_link_state should normally register an interrupt for the PCS, from which they should call phylink_mac_change(). However not all switches implement this, and those who don't should set this flag in dsa_switch in the .setup callback, so that PHYLINK will poll for a few ms until the in-band AN link timer expires and the PCS state settles. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06 01:34:12 +00:00
dp->pl_config.pcs_poll = ds->pcs_poll;
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn),
mode, &dsa_port_phylink_mac_ops);
if (IS_ERR(dp->pl)) {
pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl));
return PTR_ERR(dp->pl);
}
err = phylink_of_phy_connect(dp->pl, port_dn, 0);
net: dsa: Deal with non-existing PHY/fixed-link We need to specifically deal with phylink_of_phy_connect() returning -ENODEV, because this can happen when a CPU/DSA port does connect neither to a PHY, nor has a fixed-link property. This is a valid use case that is permitted by the binding and indicates to the switch: auto-configure port with maximum capabilities. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-10 19:31:49 +00:00
if (err && err != -ENODEV) {
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
pr_err("could not attach to PHY: %d\n", err);
goto err_phy_connect;
}
return 0;
err_phy_connect:
phylink_destroy(dp->pl);
return err;
}
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
int dsa_port_link_register_of(struct dsa_port *dp)
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
{
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11 15:24:24 +00:00
struct device_node *phy_np;
net: dsa: Down cpu/dsa ports phylink will control DSA and CPU ports can be configured in two ways. By default, the driver should configure such ports to there maximum bandwidth. For most use cases, this is sufficient. When this default is insufficient, a phylink instance can be bound to such ports, and phylink will configure the port, e.g. based on fixed-link properties. phylink assumes the port is initially down. Given that the driver should have already configured it to its maximum speed, ask the driver to down the port before instantiating the phylink instance. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14 00:34:39 +00:00
int port = dp->index;
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11 15:24:24 +00:00
if (!ds->ops->adjust_link) {
phy_np = of_parse_phandle(dp->dn, "phy-handle", 0);
net: dsa: Down cpu/dsa ports phylink will control DSA and CPU ports can be configured in two ways. By default, the driver should configure such ports to there maximum bandwidth. For most use cases, this is sufficient. When this default is insufficient, a phylink instance can be bound to such ports, and phylink will configure the port, e.g. based on fixed-link properties. phylink assumes the port is initially down. Given that the driver should have already configured it to its maximum speed, ask the driver to down the port before instantiating the phylink instance. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14 00:34:39 +00:00
if (of_phy_is_fixed_link(dp->dn) || phy_np) {
if (ds->ops->phylink_mac_link_down)
ds->ops->phylink_mac_link_down(ds, port,
MLO_AN_FIXED, PHY_INTERFACE_MODE_NA);
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11 15:24:24 +00:00
return dsa_port_phylink_register(dp);
net: dsa: Down cpu/dsa ports phylink will control DSA and CPU ports can be configured in two ways. By default, the driver should configure such ports to there maximum bandwidth. For most use cases, this is sufficient. When this default is insufficient, a phylink instance can be bound to such ports, and phylink will configure the port, e.g. based on fixed-link properties. phylink assumes the port is initially down. Given that the driver should have already configured it to its maximum speed, ask the driver to down the port before instantiating the phylink instance. Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-14 00:34:39 +00:00
}
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11 15:24:24 +00:00
return 0;
}
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
dev_warn(ds->dev,
"Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n");
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
if (of_phy_is_fixed_link(dp->dn))
return dsa_port_fixed_link_register_of(dp);
else
return dsa_port_setup_phy_of(dp, true);
}
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
void dsa_port_link_unregister_of(struct dsa_port *dp)
{
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
struct dsa_switch *ds = dp->ds;
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11 15:24:24 +00:00
if (!ds->ops->adjust_link && dp->pl) {
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
rtnl_lock();
phylink_disconnect_phy(dp->pl);
rtnl_unlock();
phylink_destroy(dp->pl);
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed By default, DSA drivers should configure CPU and DSA ports to their maximum speed. In many configurations this is sufficient to make the link work. In some cases it is necessary to configure the link to run slower, e.g. because of limitations of the SoC it is connected to. Or back to back PHYs are used and the PHY needs to be driven in order to establish link. In this case, phylink is used. Only instantiate phylink if it is required. If there is no PHY, or no fixed link properties, phylink can upset a link which works in the default configuration. Fixes: 0e27921816ad ("net: dsa: Use PHYLINK for the CPU/DSA ports") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11 15:24:24 +00:00
dp->pl = NULL;
net: dsa: Use PHYLINK for the CPU/DSA ports For DSA switches that do not have an .adjust_link callback, aka those who transitioned totally to the PHYLINK-compliant API, use PHYLINK to drive the CPU/DSA ports. The PHYLIB usage and .adjust_link are kept but deprecated, and users are asked to transition from it. The reason why we can't do anything for them is because PHYLINK does not wrap the fixed-link state behind a phydev object, so we cannot wrap .phylink_mac_config into .adjust_link unless we fabricate a phy_device structure. For these ports, the newly introduced PHYLINK_DEV operation type is used and the dsa_switch device structure is passed to PHYLINK for printing purposes. The handling of the PHYLINK_NETDEV and PHYLINK_DEV PHYLINK instances is common from the perspective of the driver. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28 17:38:16 +00:00
return;
}
net: dsa: Support internal phy on 'cpu' port This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23 15:03:46 +00:00
if (of_phy_is_fixed_link(dp->dn))
of_phy_deregister_fixed_link(dp->dn);
else
dsa_port_setup_phy_of(dp, false);
net: dsa: move fixed link registration helpers The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-26 14:50:07 +00:00
}
net: dsa: Allow providing PHY statistics from CPU port Implement the same type of ethtool diversion that we have for ETH_SS_STATS and make it work with ETH_SS_PHY_STATS. This allows providing PHY level statistics for CPU ports that are directly connecting to a PHY device. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25 19:12:52 +00:00
int dsa_port_get_phy_strings(struct dsa_port *dp, uint8_t *data)
{
struct phy_device *phydev;
int ret = -EOPNOTSUPP;
if (of_phy_is_fixed_link(dp->dn))
return ret;
phydev = dsa_port_get_phy_device(dp);
if (IS_ERR_OR_NULL(phydev))
return ret;
ret = phy_ethtool_get_strings(phydev, data);
put_device(&phydev->mdio.dev);
return ret;
}
EXPORT_SYMBOL_GPL(dsa_port_get_phy_strings);
int dsa_port_get_ethtool_phy_stats(struct dsa_port *dp, uint64_t *data)
{
struct phy_device *phydev;
int ret = -EOPNOTSUPP;
if (of_phy_is_fixed_link(dp->dn))
return ret;
phydev = dsa_port_get_phy_device(dp);
if (IS_ERR_OR_NULL(phydev))
return ret;
ret = phy_ethtool_get_stats(phydev, NULL, data);
put_device(&phydev->mdio.dev);
return ret;
}
EXPORT_SYMBOL_GPL(dsa_port_get_ethtool_phy_stats);
int dsa_port_get_phy_sset_count(struct dsa_port *dp)
{
struct phy_device *phydev;
int ret = -EOPNOTSUPP;
if (of_phy_is_fixed_link(dp->dn))
return ret;
phydev = dsa_port_get_phy_device(dp);
if (IS_ERR_OR_NULL(phydev))
return ret;
ret = phy_ethtool_get_sset_count(phydev);
put_device(&phydev->mdio.dev);
return ret;
}
EXPORT_SYMBOL_GPL(dsa_port_get_phy_sset_count);
net: dsa: add support for offloading HSR Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion tag removal, duplicate generation and forwarding on DSA switches. Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch. The DSA switch driver should then set netdev feature flags for the HSR/PRP operation that it offloads. NETIF_F_HW_HSR_TAG_INS NETIF_F_HW_HSR_TAG_RM NETIF_F_HW_HSR_FWD NETIF_F_HW_HSR_DUP Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 01:02:12 +00:00
int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr)
{
struct dsa_notifier_hsr_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.hsr = hsr,
};
int err;
dp->hsr_dev = hsr;
err = dsa_port_notify(dp, DSA_NOTIFIER_HSR_JOIN, &info);
if (err)
dp->hsr_dev = NULL;
return err;
}
void dsa_port_hsr_leave(struct dsa_port *dp, struct net_device *hsr)
{
struct dsa_notifier_hsr_info info = {
.sw_index = dp->ds->index,
.port = dp->index,
.hsr = hsr,
};
int err;
dp->hsr_dev = NULL;
err = dsa_port_notify(dp, DSA_NOTIFIER_HSR_LEAVE, &info);
if (err)
pr_err("DSA: failed to notify DSA_NOTIFIER_HSR_LEAVE\n");
}
Reference in a new issue Copy permalink