linux/drivers/devfreq/exynos-bus.c

525 lines
13 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Generic Exynos Bus frequency driver with DEVFREQ Framework
*
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
* Author : Chanwoo Choi <cw00.choi@samsung.com>
*
* This driver support Exynos Bus frequency feature by using
* DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c.
*/
#include <linux/clk.h>
#include <linux/devfreq.h>
#include <linux/devfreq-event.h>
#include <linux/device.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm_opp.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#define DEFAULT_SATURATION_RATIO 40
struct exynos_bus {
struct device *dev;
struct platform_device *icc_pdev;
struct devfreq *devfreq;
struct devfreq_event_dev **edev;
unsigned int edev_count;
struct mutex lock;
unsigned long curr_freq;
int opp_token;
struct clk *clk;
unsigned int ratio;
};
/*
* Control the devfreq-event device to get the current state of bus
*/
#define exynos_bus_ops_edev(ops) \
static int exynos_bus_##ops(struct exynos_bus *bus) \
{ \
int i, ret; \
\
for (i = 0; i < bus->edev_count; i++) { \
if (!bus->edev[i]) \
continue; \
ret = devfreq_event_##ops(bus->edev[i]); \
if (ret < 0) \
return ret; \
} \
\
return 0; \
}
exynos_bus_ops_edev(enable_edev);
exynos_bus_ops_edev(disable_edev);
exynos_bus_ops_edev(set_event);
static int exynos_bus_get_event(struct exynos_bus *bus,
struct devfreq_event_data *edata)
{
struct devfreq_event_data event_data;
unsigned long load_count = 0, total_count = 0;
int i, ret = 0;
for (i = 0; i < bus->edev_count; i++) {
if (!bus->edev[i])
continue;
ret = devfreq_event_get_event(bus->edev[i], &event_data);
if (ret < 0)
return ret;
if (i == 0 || event_data.load_count > load_count) {
load_count = event_data.load_count;
total_count = event_data.total_count;
}
}
edata->load_count = load_count;
edata->total_count = total_count;
return ret;
}
/*
* devfreq function for both simple-ondemand and passive governor
*/
static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
struct dev_pm_opp *new_opp;
int ret = 0;
/* Get correct frequency for bus. */
new_opp = devfreq_recommended_opp(dev, freq, flags);
if (IS_ERR(new_opp)) {
dev_err(dev, "failed to get recommended opp instance\n");
return PTR_ERR(new_opp);
}
dev_pm_opp_put(new_opp);
/* Change voltage and frequency according to new OPP level */
mutex_lock(&bus->lock);
ret = dev_pm_opp_set_rate(dev, *freq);
if (!ret)
bus->curr_freq = *freq;
mutex_unlock(&bus->lock);
return ret;
}
static int exynos_bus_get_dev_status(struct device *dev,
struct devfreq_dev_status *stat)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
struct devfreq_event_data edata;
int ret;
stat->current_frequency = bus->curr_freq;
ret = exynos_bus_get_event(bus, &edata);
if (ret < 0) {
dev_err(dev, "failed to get event from devfreq-event devices\n");
stat->total_time = stat->busy_time = 0;
goto err;
}
stat->busy_time = (edata.load_count * 100) / bus->ratio;
stat->total_time = edata.total_count;
dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time,
stat->total_time);
err:
ret = exynos_bus_set_event(bus);
if (ret < 0) {
dev_err(dev, "failed to set event to devfreq-event devices\n");
return ret;
}
return ret;
}
static void exynos_bus_exit(struct device *dev)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
int ret;
ret = exynos_bus_disable_edev(bus);
if (ret < 0)
dev_warn(dev, "failed to disable the devfreq-event devices\n");
platform_device_unregister(bus->icc_pdev);
dev_pm_opp_of_remove_table(dev);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
clk_disable_unprepare(bus->clk);
dev_pm_opp_put_regulators(bus->opp_token);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
}
static void exynos_bus_passive_exit(struct device *dev)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
platform_device_unregister(bus->icc_pdev);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
dev_pm_opp_of_remove_table(dev);
clk_disable_unprepare(bus->clk);
}
static int exynos_bus_parent_parse_of(struct device_node *np,
struct exynos_bus *bus)
{
struct device *dev = bus->dev;
const char *supplies[] = { "vdd", NULL };
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
int i, ret, count, size;
ret = dev_pm_opp_set_regulators(dev, supplies);
if (ret < 0) {
dev_err(dev, "failed to set regulators %d\n", ret);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
return ret;
}
bus->opp_token = ret;
/*
* Get the devfreq-event devices to get the current utilization of
* buses. This raw data will be used in devfreq ondemand governor.
*/
count = devfreq_event_get_edev_count(dev, "devfreq-events");
if (count < 0) {
dev_err(dev, "failed to get the count of devfreq-event dev\n");
ret = count;
goto err_regulator;
}
bus->edev_count = count;
size = sizeof(*bus->edev) * count;
bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
if (!bus->edev) {
ret = -ENOMEM;
goto err_regulator;
}
for (i = 0; i < count; i++) {
bus->edev[i] = devfreq_event_get_edev_by_phandle(dev,
"devfreq-events", i);
if (IS_ERR(bus->edev[i])) {
ret = -EPROBE_DEFER;
goto err_regulator;
}
}
/*
* Optionally, Get the saturation ratio according to Exynos SoC
* When measuring the utilization of each AXI bus with devfreq-event
* devices, the measured real cycle might be much lower than the
* total cycle of bus during sampling rate. In result, the devfreq
* simple-ondemand governor might not decide to change the current
* frequency due to too utilization (= real cycle/total cycle).
* So, this property is used to adjust the utilization when calculating
* the busy_time in exynos_bus_get_dev_status().
*/
if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
bus->ratio = DEFAULT_SATURATION_RATIO;
return 0;
err_regulator:
dev_pm_opp_put_regulators(bus->opp_token);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
return ret;
}
static int exynos_bus_parse_of(struct device_node *np,
struct exynos_bus *bus)
{
struct device *dev = bus->dev;
struct dev_pm_opp *opp;
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
unsigned long rate;
int ret;
/* Get the clock to provide each bus with source clock */
bus->clk = devm_clk_get(dev, "bus");
if (IS_ERR(bus->clk)) {
dev_err(dev, "failed to get bus clock\n");
return PTR_ERR(bus->clk);
}
ret = clk_prepare_enable(bus->clk);
if (ret < 0) {
dev_err(dev, "failed to get enable clock\n");
return ret;
}
/* Get the freq and voltage from OPP table to scale the bus freq */
ret = dev_pm_opp_of_add_table(dev);
if (ret < 0) {
dev_err(dev, "failed to get OPP table\n");
goto err_clk;
}
rate = clk_get_rate(bus->clk);
opp = devfreq_recommended_opp(dev, &rate, 0);
if (IS_ERR(opp)) {
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
dev_err(dev, "failed to find dev_pm_opp\n");
ret = PTR_ERR(opp);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
goto err_opp;
}
bus->curr_freq = dev_pm_opp_get_freq(opp);
dev_pm_opp_put(opp);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
return 0;
err_opp:
dev_pm_opp_of_remove_table(dev);
err_clk:
clk_disable_unprepare(bus->clk);
return ret;
}
static int exynos_bus_profile_init(struct exynos_bus *bus,
struct devfreq_dev_profile *profile)
{
struct device *dev = bus->dev;
struct devfreq_simple_ondemand_data *ondemand_data;
int ret;
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
/* Initialize the struct profile and governor data for parent device */
profile->polling_ms = 50;
profile->target = exynos_bus_target;
profile->get_dev_status = exynos_bus_get_dev_status;
profile->exit = exynos_bus_exit;
ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
if (!ondemand_data)
return -ENOMEM;
ondemand_data->upthreshold = 40;
ondemand_data->downdifferential = 5;
/* Add devfreq device to monitor and handle the exynos bus */
bus->devfreq = devm_devfreq_add_device(dev, profile,
DEVFREQ_GOV_SIMPLE_ONDEMAND,
ondemand_data);
if (IS_ERR(bus->devfreq)) {
dev_err(dev, "failed to add devfreq device\n");
return PTR_ERR(bus->devfreq);
}
/* Register opp_notifier to catch the change of OPP */
ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
if (ret < 0) {
dev_err(dev, "failed to register opp notifier\n");
return ret;
}
/*
* Enable devfreq-event to get raw data which is used to determine
* current bus load.
*/
ret = exynos_bus_enable_edev(bus);
if (ret < 0) {
dev_err(dev, "failed to enable devfreq-event devices\n");
return ret;
}
ret = exynos_bus_set_event(bus);
if (ret < 0) {
dev_err(dev, "failed to set event to devfreq-event devices\n");
goto err_edev;
}
return 0;
err_edev:
if (exynos_bus_disable_edev(bus))
dev_warn(dev, "failed to disable the devfreq-event devices\n");
return ret;
}
static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
struct devfreq_dev_profile *profile)
{
struct device *dev = bus->dev;
struct devfreq_passive_data *passive_data;
struct devfreq *parent_devfreq;
/* Initialize the struct profile and governor data for passive device */
profile->target = exynos_bus_target;
profile->exit = exynos_bus_passive_exit;
/* Get the instance of parent devfreq device */
parent_devfreq = devfreq_get_devfreq_by_phandle(dev, "devfreq", 0);
if (IS_ERR(parent_devfreq))
return -EPROBE_DEFER;
passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
if (!passive_data)
return -ENOMEM;
passive_data->parent = parent_devfreq;
/* Add devfreq device for exynos bus with passive governor */
bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE,
passive_data);
if (IS_ERR(bus->devfreq)) {
dev_err(dev,
"failed to add devfreq dev with passive governor\n");
return PTR_ERR(bus->devfreq);
}
return 0;
}
static int exynos_bus_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node, *node;
struct devfreq_dev_profile *profile;
struct exynos_bus *bus;
int ret, max_state;
unsigned long min_freq, max_freq;
bool passive = false;
if (!np) {
dev_err(dev, "failed to find devicetree node\n");
return -EINVAL;
}
bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
if (!bus)
return -ENOMEM;
mutex_init(&bus->lock);
bus->dev = &pdev->dev;
platform_set_drvdata(pdev, bus);
profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
if (!profile)
return -ENOMEM;
node = of_parse_phandle(dev->of_node, "devfreq", 0);
if (node) {
of_node_put(node);
passive = true;
} else {
ret = exynos_bus_parent_parse_of(np, bus);
if (ret < 0)
return ret;
}
/* Parse the device-tree to get the resource information */
ret = exynos_bus_parse_of(np, bus);
if (ret < 0)
goto err_reg;
if (passive)
ret = exynos_bus_profile_init_passive(bus, profile);
else
ret = exynos_bus_profile_init(bus, profile);
if (ret < 0)
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
goto err;
/* Create child platform device for the interconnect provider */
if (of_property_present(dev->of_node, "#interconnect-cells")) {
bus->icc_pdev = platform_device_register_data(
dev, "exynos-generic-icc",
PLATFORM_DEVID_AUTO, NULL, 0);
if (IS_ERR(bus->icc_pdev)) {
ret = PTR_ERR(bus->icc_pdev);
goto err;
}
}
max_state = bus->devfreq->max_state;
min_freq = (bus->devfreq->freq_table[0] / 1000);
max_freq = (bus->devfreq->freq_table[max_state - 1] / 1000);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n",
dev_name(dev), min_freq, max_freq);
return 0;
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
err:
dev_pm_opp_of_remove_table(dev);
clk_disable_unprepare(bus->clk);
err_reg:
dev_pm_opp_put_regulators(bus->opp_token);
PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2015-11-05 09:29:27 +00:00
return ret;
}
static void exynos_bus_shutdown(struct platform_device *pdev)
{
struct exynos_bus *bus = dev_get_drvdata(&pdev->dev);
devfreq_suspend_device(bus->devfreq);
}
#ifdef CONFIG_PM_SLEEP
static int exynos_bus_resume(struct device *dev)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
int ret;
ret = exynos_bus_enable_edev(bus);
if (ret < 0) {
dev_err(dev, "failed to enable the devfreq-event devices\n");
return ret;
}
return 0;
}
static int exynos_bus_suspend(struct device *dev)
{
struct exynos_bus *bus = dev_get_drvdata(dev);
int ret;
ret = exynos_bus_disable_edev(bus);
if (ret < 0) {
dev_err(dev, "failed to disable the devfreq-event devices\n");
return ret;
}
return 0;
}
#endif
static const struct dev_pm_ops exynos_bus_pm = {
SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume)
};
static const struct of_device_id exynos_bus_of_match[] = {
{ .compatible = "samsung,exynos-bus", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, exynos_bus_of_match);
static struct platform_driver exynos_bus_platdrv = {
.probe = exynos_bus_probe,
.shutdown = exynos_bus_shutdown,
.driver = {
.name = "exynos-bus",
.pm = &exynos_bus_pm,
.of_match_table = exynos_bus_of_match,
},
};
module_platform_driver(exynos_bus_platdrv);
MODULE_SOFTDEP("pre: exynos_ppmu");
MODULE_DESCRIPTION("Generic Exynos Bus frequency driver");
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_LICENSE("GPL v2");