linux/tools/Makefile

193 lines
6.3 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
# Some of the tools (perf) use same make variables
# as in kernel build.
export srctree=
export objtree=
include scripts/Makefile.include
help:
@echo 'Possible targets:'
@echo ''
@echo ' acpi - ACPI tools'
@echo ' bpf - misc BPF tools'
@echo ' cgroup - cgroup tools'
@echo ' counter - counter tools'
@echo ' cpupower - a tool for all things x86 CPU power'
@echo ' debugging - tools for debugging'
@echo ' firewire - the userspace part of nosy, an IEEE-1394 traffic sniffer'
@echo ' firmware - Firmware tools'
@echo ' freefall - laptop accelerometer program for disk protection'
@echo ' gpio - GPIO tools'
@echo ' hv - tools used when in Hyper-V clients'
@echo ' iio - IIO tools'
@echo ' intel-speed-select - Intel Speed Select tool'
@echo ' kvm_stat - top-like utility for displaying kvm statistics'
@echo ' leds - LEDs tools'
@echo ' liblockdep - user-space wrapper for kernel locking-validator'
@echo ' objtool - an ELF object analysis tool'
@echo ' pci - PCI tools'
@echo ' perf - Linux performance measurement and analysis tool'
@echo ' selftests - various kernel selftests'
@echo ' bootconfig - boot config tool'
@echo ' spi - spi tools'
@echo ' tmon - thermal monitoring and tuning tool'
tracing/tools: Add the latency-collector to tools directory This is a tool that is intended to work around the fact that the preemptoff, irqsoff, and preemptirqsoff tracers only work in overwrite mode. The idea is to act randomly in such a way that we do not systematically lose any latencies, so that if enough testing is done, all latencies will be captured. If the same burst of latencies is repeated, then sooner or later we will have captured all the latencies. It also works with the wakeup_dl, wakeup_rt, and wakeup tracers. However, in that case it is probably not useful to use the random sleep functionality. The reason why it may be desirable to catch all latencies with a long test campaign is that for some organizations, it's necessary to test the kernel in the field and not practical for developers to work iteratively with field testers. Because of cost and project schedules it is not possible to start a new test campaign every time a latency problem has been fixed. It uses inotify to detect changes to /sys/kernel/tracing/trace. When a latency is detected, it will either sleep or print immediately, depending on a function that act as an unfair coin toss. If immediate print is chosen, it means that we open /sys/kernel/tracing/trace and thereby cause a blackout period that will hide any subsequent latencies. If sleep is chosen, it means that we wait before opening /sys/kernel/tracing/trace, by default for 1000 ms, to see if there is another latency during this period. If there is, then we will lose the previous latency. The coin will be tossed again with a different probability, and we will either print the new latency, or possibly a subsequent one. The probability for the unfair coin toss is chosen so that there is equal probability to obtain any of the latencies in a burst. However, this assumes that we make an assumption of how many latencies there can be. By default the program assumes that there are no more than 2 latencies in a burst, the probability of immediate printout will be: 1/2 and 1 Thus, the probability of getting each of the two latencies will be 1/2. If we ever find that there is more than one latency in a series, meaning that we reach the probability of 1, then the table will be expanded to: 1/3, 1/2, and 1 Thus, we assume that there are no more than three latencies and each with a probability of 1/3 of being captured. If the probability of 1 is reached in the new table, that is we see more than two closely occurring latencies, then the table will again be extended, and so on. On my systems, it seems like this scheme works fairly well, as long as the latencies we trace are long enough, 300 us seems to be enough. This userspace program receive the inotify event at the end of a latency, and it has time until the end of the next latency to react, that is to open /sys/kernel/tracing/trace. Thus, if we trace latencies that are >300 us, then we have at least 300 us to react. The minimum latency will of course not be 300 us on all systems, it will depend on the hardware, kernel version, workload and configuration. Example usage: In one shell, give the following command: sudo latency-collector -rvv -t preemptirqsoff -s 2000 -a 3 This will trace latencies > 2000us with the preemptirqsoff tracer, using random sleep with maximum verbosity, with a probability table initialized to a size of 3. In another shell, generate a few bursts of latencies: root@host:~# modprobe preemptirq_delay_test delay=3000 test_mode=alternate burst_size=3 root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger If all goes well, you should be getting stack traces that shows all the different latencies, i.e. you should see all the three functions preemptirqtest_0, preemptirqtest_1, preemptirqtest_2 in the stack traces. Link: https://lkml.kernel.org/r/20210212134421.172750-2-Viktor.Rosendahl@bmw.de Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-12 13:44:21 +00:00
@echo ' tracing - misc tracing tools'
@echo ' turbostat - Intel CPU idle stats and freq reporting tool'
@echo ' usb - USB testing tools'
@echo ' virtio - vhost test module'
@echo ' vm - misc vm tools'
@echo ' wmi - WMI interface examples'
@echo ' x86_energy_perf_policy - Intel energy policy tool'
@echo ''
@echo 'You can do:'
@echo ' $$ make -C tools/ <tool>_install'
@echo ''
@echo ' from the kernel command line to build and install one of'
@echo ' the tools above'
@echo ''
@echo ' $$ make tools/all'
@echo ''
@echo ' builds all tools.'
@echo ''
@echo ' $$ make tools/install'
@echo ''
@echo ' installs all tools.'
@echo ''
@echo 'Cleaning targets:'
@echo ''
@echo ' all of the above with the "_clean" string appended cleans'
@echo ' the respective build directory.'
@echo ' clean: a summary clean target to clean _all_ folders'
acpi: FORCE
$(call descend,power/$@)
cpupower: FORCE
$(call descend,power/$@)
cgroup counter firewire hv guest bootconfig spi usb virtio vm bpf iio gpio objtool leds wmi pci firmware debugging tracing: FORCE
$(call descend,$@)
bpf/%: FORCE
$(call descend,$@)
liblockdep: FORCE
$(call descend,lib/lockdep)
libapi: FORCE
tools/: Convert to new topic libraries Move debugfs.* to api/fs/. We have a common tools/lib/api/ place where the Makefile lives and then we place the headers in subdirs. For example, all the fs-related stuff goes to tools/lib/api/fs/ from which we get libapikfs.a (acme got almost the naming he wanted :-)) and we link it into the tools which need it - in this case perf and tools/vm/page-types. acme: "Looking at the implementation, I think some tools can even link directly to the .o files, avoiding the .a file altogether. But that is just an optimization/finer granularity tools/lib/ cherrypicking that toolers can make use of." Fixup documentation cleaning target while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386605664-24041-2-git-send-email-bp@alien8.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-09 16:14:23 +00:00
$(call descend,lib/api)
# The perf build does not follow the descend function setup,
# invoking it via it's own make rule.
PERF_O = $(if $(O),$(O)/tools/perf,)
perf: FORCE
$(Q)mkdir -p $(PERF_O) .
$(Q)$(MAKE) --no-print-directory -C perf O=$(PERF_O) subdir=
selftests: FORCE
$(call descend,testing/$@)
turbostat x86_energy_perf_policy intel-speed-select: FORCE
$(call descend,power/x86/$@)
tmon: FORCE
$(call descend,thermal/$@)
freefall: FORCE
$(call descend,laptop/$@)
kvm_stat: FORCE
$(call descend,kvm/$@)
all: acpi cgroup counter cpupower gpio hv firewire liblockdep \
perf selftests bootconfig spi turbostat usb \
virtio vm bpf x86_energy_perf_policy \
tmon freefall iio objtool kvm_stat wmi \
tracing/tools: Add the latency-collector to tools directory This is a tool that is intended to work around the fact that the preemptoff, irqsoff, and preemptirqsoff tracers only work in overwrite mode. The idea is to act randomly in such a way that we do not systematically lose any latencies, so that if enough testing is done, all latencies will be captured. If the same burst of latencies is repeated, then sooner or later we will have captured all the latencies. It also works with the wakeup_dl, wakeup_rt, and wakeup tracers. However, in that case it is probably not useful to use the random sleep functionality. The reason why it may be desirable to catch all latencies with a long test campaign is that for some organizations, it's necessary to test the kernel in the field and not practical for developers to work iteratively with field testers. Because of cost and project schedules it is not possible to start a new test campaign every time a latency problem has been fixed. It uses inotify to detect changes to /sys/kernel/tracing/trace. When a latency is detected, it will either sleep or print immediately, depending on a function that act as an unfair coin toss. If immediate print is chosen, it means that we open /sys/kernel/tracing/trace and thereby cause a blackout period that will hide any subsequent latencies. If sleep is chosen, it means that we wait before opening /sys/kernel/tracing/trace, by default for 1000 ms, to see if there is another latency during this period. If there is, then we will lose the previous latency. The coin will be tossed again with a different probability, and we will either print the new latency, or possibly a subsequent one. The probability for the unfair coin toss is chosen so that there is equal probability to obtain any of the latencies in a burst. However, this assumes that we make an assumption of how many latencies there can be. By default the program assumes that there are no more than 2 latencies in a burst, the probability of immediate printout will be: 1/2 and 1 Thus, the probability of getting each of the two latencies will be 1/2. If we ever find that there is more than one latency in a series, meaning that we reach the probability of 1, then the table will be expanded to: 1/3, 1/2, and 1 Thus, we assume that there are no more than three latencies and each with a probability of 1/3 of being captured. If the probability of 1 is reached in the new table, that is we see more than two closely occurring latencies, then the table will again be extended, and so on. On my systems, it seems like this scheme works fairly well, as long as the latencies we trace are long enough, 300 us seems to be enough. This userspace program receive the inotify event at the end of a latency, and it has time until the end of the next latency to react, that is to open /sys/kernel/tracing/trace. Thus, if we trace latencies that are >300 us, then we have at least 300 us to react. The minimum latency will of course not be 300 us on all systems, it will depend on the hardware, kernel version, workload and configuration. Example usage: In one shell, give the following command: sudo latency-collector -rvv -t preemptirqsoff -s 2000 -a 3 This will trace latencies > 2000us with the preemptirqsoff tracer, using random sleep with maximum verbosity, with a probability table initialized to a size of 3. In another shell, generate a few bursts of latencies: root@host:~# modprobe preemptirq_delay_test delay=3000 test_mode=alternate burst_size=3 root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger If all goes well, you should be getting stack traces that shows all the different latencies, i.e. you should see all the three functions preemptirqtest_0, preemptirqtest_1, preemptirqtest_2 in the stack traces. Link: https://lkml.kernel.org/r/20210212134421.172750-2-Viktor.Rosendahl@bmw.de Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-12 13:44:21 +00:00
pci debugging tracing
acpi_install:
$(call descend,power/$(@:_install=),install)
cpupower_install:
$(call descend,power/$(@:_install=),install)
cgroup_install counter_install firewire_install gpio_install hv_install iio_install perf_install bootconfig_install spi_install usb_install virtio_install vm_install bpf_install objtool_install wmi_install pci_install debugging_install tracing_install:
$(call descend,$(@:_install=),install)
liblockdep_install:
$(call descend,lib/lockdep,install)
selftests_install:
$(call descend,testing/$(@:_install=),install)
turbostat_install x86_energy_perf_policy_install intel-speed-select_install:
$(call descend,power/x86/$(@:_install=),install)
tmon_install:
$(call descend,thermal/$(@:_install=),install)
freefall_install:
$(call descend,laptop/$(@:_install=),install)
kvm_stat_install:
$(call descend,kvm/$(@:_install=),install)
install: acpi_install cgroup_install counter_install cpupower_install gpio_install \
Staging/IIO driver updates for 4.14-rc1 Here is the big staging and IIO driver update for 4.14-rc1. Lots of staging driver fixes and cleanups, including some reorginizing of the lustre header files to try to impose some sanity on what is, and what is not, the uapi for that filesystem. There are some tty core changes in here as well, as the speakup drivers need them, and that's ok with me, they are sane and the speakup code is getting nicer because of it. There is also the addition of the obiligatory new wifi driver, just because it has been a release or two since we added our last one... Other than that, lots and lots of small coding style fixes, as usual. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWa2AbA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymboACfUsNhw+cJlVb25J70NULkye3y1PAAoJ+Ayq30 ckkLGakZayKcYEx50ffH =KJwg -----END PGP SIGNATURE----- Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the big staging and IIO driver update for 4.14-rc1. Lots of staging driver fixes and cleanups, including some reorginizing of the lustre header files to try to impose some sanity on what is, and what is not, the uapi for that filesystem. There are some tty core changes in here as well, as the speakup drivers need them, and that's ok with me, they are sane and the speakup code is getting nicer because of it. There is also the addition of the obiligatory new wifi driver, just because it has been a release or two since we added our last one... Other than that, lots and lots of small coding style fixes, as usual. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits) staging:rtl8188eu:core Fix remove unneccessary else block staging: typec: fusb302: make structure fusb302_psy_desc static staging: unisys: visorbus: make two functions static staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks staging: r8822be: Simplify deinit_priv() staging: r8822be: Remove some dead code staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability staging:rtl8188eu Fix comparison to NULL staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd Staging: Pi433: style fix - tabs and spaces staging: pi433: fix spelling mistake: "preample" -> "preamble" staging:rtl8188eu:core Fix Code Indent staging: typec: fusb302: Export current-limit through a power_supply class dev staging: typec: fusb302: Add support for USB2 charger detection through extcon staging: typec: fusb302: Use client->irq as irq if set staging: typec: fusb302: Get max snk mv/ma/mw from device-properties staging: typec: fusb302: Set max supply voltage to 5V staging: typec: tcpm: Add get_current_limit tcpc_dev callback staging:rtl8188eu Use __func__ instead of function name staging: lustre: coding style fixes found by checkpatch.pl ...
2017-09-05 17:36:26 +00:00
hv_install firewire_install iio_install liblockdep_install \
perf_install selftests_install turbostat_install usb_install \
virtio_install vm_install bpf_install x86_energy_perf_policy_install \
tmon_install freefall_install objtool_install kvm_stat_install \
tracing/tools: Add the latency-collector to tools directory This is a tool that is intended to work around the fact that the preemptoff, irqsoff, and preemptirqsoff tracers only work in overwrite mode. The idea is to act randomly in such a way that we do not systematically lose any latencies, so that if enough testing is done, all latencies will be captured. If the same burst of latencies is repeated, then sooner or later we will have captured all the latencies. It also works with the wakeup_dl, wakeup_rt, and wakeup tracers. However, in that case it is probably not useful to use the random sleep functionality. The reason why it may be desirable to catch all latencies with a long test campaign is that for some organizations, it's necessary to test the kernel in the field and not practical for developers to work iteratively with field testers. Because of cost and project schedules it is not possible to start a new test campaign every time a latency problem has been fixed. It uses inotify to detect changes to /sys/kernel/tracing/trace. When a latency is detected, it will either sleep or print immediately, depending on a function that act as an unfair coin toss. If immediate print is chosen, it means that we open /sys/kernel/tracing/trace and thereby cause a blackout period that will hide any subsequent latencies. If sleep is chosen, it means that we wait before opening /sys/kernel/tracing/trace, by default for 1000 ms, to see if there is another latency during this period. If there is, then we will lose the previous latency. The coin will be tossed again with a different probability, and we will either print the new latency, or possibly a subsequent one. The probability for the unfair coin toss is chosen so that there is equal probability to obtain any of the latencies in a burst. However, this assumes that we make an assumption of how many latencies there can be. By default the program assumes that there are no more than 2 latencies in a burst, the probability of immediate printout will be: 1/2 and 1 Thus, the probability of getting each of the two latencies will be 1/2. If we ever find that there is more than one latency in a series, meaning that we reach the probability of 1, then the table will be expanded to: 1/3, 1/2, and 1 Thus, we assume that there are no more than three latencies and each with a probability of 1/3 of being captured. If the probability of 1 is reached in the new table, that is we see more than two closely occurring latencies, then the table will again be extended, and so on. On my systems, it seems like this scheme works fairly well, as long as the latencies we trace are long enough, 300 us seems to be enough. This userspace program receive the inotify event at the end of a latency, and it has time until the end of the next latency to react, that is to open /sys/kernel/tracing/trace. Thus, if we trace latencies that are >300 us, then we have at least 300 us to react. The minimum latency will of course not be 300 us on all systems, it will depend on the hardware, kernel version, workload and configuration. Example usage: In one shell, give the following command: sudo latency-collector -rvv -t preemptirqsoff -s 2000 -a 3 This will trace latencies > 2000us with the preemptirqsoff tracer, using random sleep with maximum verbosity, with a probability table initialized to a size of 3. In another shell, generate a few bursts of latencies: root@host:~# modprobe preemptirq_delay_test delay=3000 test_mode=alternate burst_size=3 root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger If all goes well, you should be getting stack traces that shows all the different latencies, i.e. you should see all the three functions preemptirqtest_0, preemptirqtest_1, preemptirqtest_2 in the stack traces. Link: https://lkml.kernel.org/r/20210212134421.172750-2-Viktor.Rosendahl@bmw.de Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-12 13:44:21 +00:00
wmi_install pci_install debugging_install intel-speed-select_install \
tracing_install
acpi_clean:
$(call descend,power/acpi,clean)
cpupower_clean:
$(call descend,power/cpupower,clean)
cgroup_clean counter_clean hv_clean firewire_clean bootconfig_clean spi_clean usb_clean virtio_clean vm_clean wmi_clean bpf_clean iio_clean gpio_clean objtool_clean leds_clean pci_clean firmware_clean debugging_clean tracing_clean:
$(call descend,$(@:_clean=),clean)
liblockdep_clean:
$(call descend,lib/lockdep,clean)
libapi_clean:
tools/: Convert to new topic libraries Move debugfs.* to api/fs/. We have a common tools/lib/api/ place where the Makefile lives and then we place the headers in subdirs. For example, all the fs-related stuff goes to tools/lib/api/fs/ from which we get libapikfs.a (acme got almost the naming he wanted :-)) and we link it into the tools which need it - in this case perf and tools/vm/page-types. acme: "Looking at the implementation, I think some tools can even link directly to the .o files, avoiding the .a file altogether. But that is just an optimization/finer granularity tools/lib/ cherrypicking that toolers can make use of." Fixup documentation cleaning target while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Stanislav Fomichev <stfomichev@yandex-team.ru> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386605664-24041-2-git-send-email-bp@alien8.de Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-09 16:14:23 +00:00
$(call descend,lib/api,clean)
libbpf_clean:
$(call descend,lib/bpf,clean)
libsubcmd_clean:
$(call descend,lib/subcmd,clean)
perf_clean:
$(Q)mkdir -p $(PERF_O) .
$(Q)$(MAKE) --no-print-directory -C perf O=$(PERF_O) subdir= clean
selftests_clean:
$(call descend,testing/$(@:_clean=),clean)
turbostat_clean x86_energy_perf_policy_clean intel-speed-select_clean:
$(call descend,power/x86/$(@:_clean=),clean)
tmon_clean:
$(call descend,thermal/tmon,clean)
freefall_clean:
$(call descend,laptop/freefall,clean)
build_clean:
$(call descend,build,clean)
clean: acpi_clean cgroup_clean counter_clean cpupower_clean hv_clean firewire_clean \
perf_clean selftests_clean turbostat_clean bootconfig_clean spi_clean usb_clean virtio_clean \
vm_clean bpf_clean iio_clean x86_energy_perf_policy_clean tmon_clean \
freefall_clean build_clean libbpf_clean libsubcmd_clean liblockdep_clean \
gpio_clean objtool_clean leds_clean wmi_clean pci_clean firmware_clean debugging_clean \
tracing/tools: Add the latency-collector to tools directory This is a tool that is intended to work around the fact that the preemptoff, irqsoff, and preemptirqsoff tracers only work in overwrite mode. The idea is to act randomly in such a way that we do not systematically lose any latencies, so that if enough testing is done, all latencies will be captured. If the same burst of latencies is repeated, then sooner or later we will have captured all the latencies. It also works with the wakeup_dl, wakeup_rt, and wakeup tracers. However, in that case it is probably not useful to use the random sleep functionality. The reason why it may be desirable to catch all latencies with a long test campaign is that for some organizations, it's necessary to test the kernel in the field and not practical for developers to work iteratively with field testers. Because of cost and project schedules it is not possible to start a new test campaign every time a latency problem has been fixed. It uses inotify to detect changes to /sys/kernel/tracing/trace. When a latency is detected, it will either sleep or print immediately, depending on a function that act as an unfair coin toss. If immediate print is chosen, it means that we open /sys/kernel/tracing/trace and thereby cause a blackout period that will hide any subsequent latencies. If sleep is chosen, it means that we wait before opening /sys/kernel/tracing/trace, by default for 1000 ms, to see if there is another latency during this period. If there is, then we will lose the previous latency. The coin will be tossed again with a different probability, and we will either print the new latency, or possibly a subsequent one. The probability for the unfair coin toss is chosen so that there is equal probability to obtain any of the latencies in a burst. However, this assumes that we make an assumption of how many latencies there can be. By default the program assumes that there are no more than 2 latencies in a burst, the probability of immediate printout will be: 1/2 and 1 Thus, the probability of getting each of the two latencies will be 1/2. If we ever find that there is more than one latency in a series, meaning that we reach the probability of 1, then the table will be expanded to: 1/3, 1/2, and 1 Thus, we assume that there are no more than three latencies and each with a probability of 1/3 of being captured. If the probability of 1 is reached in the new table, that is we see more than two closely occurring latencies, then the table will again be extended, and so on. On my systems, it seems like this scheme works fairly well, as long as the latencies we trace are long enough, 300 us seems to be enough. This userspace program receive the inotify event at the end of a latency, and it has time until the end of the next latency to react, that is to open /sys/kernel/tracing/trace. Thus, if we trace latencies that are >300 us, then we have at least 300 us to react. The minimum latency will of course not be 300 us on all systems, it will depend on the hardware, kernel version, workload and configuration. Example usage: In one shell, give the following command: sudo latency-collector -rvv -t preemptirqsoff -s 2000 -a 3 This will trace latencies > 2000us with the preemptirqsoff tracer, using random sleep with maximum verbosity, with a probability table initialized to a size of 3. In another shell, generate a few bursts of latencies: root@host:~# modprobe preemptirq_delay_test delay=3000 test_mode=alternate burst_size=3 root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger root@host:~# echo 1 > /sys/kernel/preemptirq_delay_test/trigger If all goes well, you should be getting stack traces that shows all the different latencies, i.e. you should see all the three functions preemptirqtest_0, preemptirqtest_1, preemptirqtest_2 in the stack traces. Link: https://lkml.kernel.org/r/20210212134421.172750-2-Viktor.Rosendahl@bmw.de Signed-off-by: Viktor Rosendahl <Viktor.Rosendahl@bmw.de> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-12 13:44:21 +00:00
intel-speed-select_clean tracing_clean
.PHONY: FORCE