linux/drivers/media/dvb-frontends/stv6110.c

462 lines
11 KiB
C
Raw Normal View History

/*
* stv6110.c
*
* Driver for ST STV6110 satellite tuner IC.
*
* Copyright (C) 2009 NetUP Inc.
* Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/dvb/frontend.h>
#include <linux/types.h>
#include "stv6110.h"
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/itd1000.c:69:1: warning: 'itd1000_write_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/mt312.c:126:1: warning: 'mt312_write' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/nxt200x.c:111:1: warning: 'nxt200x_writebytes' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stb6100.c:216:1: warning: 'stb6100_write_reg_range.constprop.3' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110.c:98:1: warning: 'stv6110_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110x.c:85:1: warning: 'stv6110x_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda18271c2dd.c:147:1: warning: 'WriteRegs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/zl10039.c:119:1: warning: 'zl10039_write' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:05:18 +00:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
static int debug;
struct stv6110_priv {
int i2c_address;
struct i2c_adapter *i2c;
u32 mclk;
u8 clk_div;
u8 gain;
u8 regs[8];
};
#define dprintk(args...) \
do { \
if (debug) \
printk(KERN_DEBUG args); \
} while (0)
static s32 abssub(s32 a, s32 b)
{
if (a > b)
return a - b;
else
return b - a;
};
static int stv6110_release(struct dvb_frontend *fe)
{
kfree(fe->tuner_priv);
fe->tuner_priv = NULL;
return 0;
}
static int stv6110_write_regs(struct dvb_frontend *fe, u8 buf[],
int start, int len)
{
struct stv6110_priv *priv = fe->tuner_priv;
int rc;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/itd1000.c:69:1: warning: 'itd1000_write_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/mt312.c:126:1: warning: 'mt312_write' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/nxt200x.c:111:1: warning: 'nxt200x_writebytes' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stb6100.c:216:1: warning: 'stb6100_write_reg_range.constprop.3' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110.c:98:1: warning: 'stv6110_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110x.c:85:1: warning: 'stv6110x_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda18271c2dd.c:147:1: warning: 'WriteRegs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/zl10039.c:119:1: warning: 'zl10039_write' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:05:18 +00:00
u8 cmdbuf[MAX_XFER_SIZE];
struct i2c_msg msg = {
.addr = priv->i2c_address,
.flags = 0,
.buf = cmdbuf,
.len = len + 1
};
dprintk("%s\n", __func__);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/itd1000.c:69:1: warning: 'itd1000_write_regs.constprop.0' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/mt312.c:126:1: warning: 'mt312_write' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/nxt200x.c:111:1: warning: 'nxt200x_writebytes' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stb6100.c:216:1: warning: 'stb6100_write_reg_range.constprop.3' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110.c:98:1: warning: 'stv6110_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/stv6110x.c:85:1: warning: 'stv6110x_write_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda18271c2dd.c:147:1: warning: 'WriteRegs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/zl10039.c:119:1: warning: 'zl10039_write' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 08:05:18 +00:00
if (1 + len > sizeof(cmdbuf)) {
printk(KERN_WARNING
"%s: i2c wr: len=%d is too big!\n",
KBUILD_MODNAME, len);
return -EINVAL;
}
if (start + len > 8)
return -EINVAL;
memcpy(&cmdbuf[1], buf, len);
cmdbuf[0] = start;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
rc = i2c_transfer(priv->i2c, &msg, 1);
if (rc != 1)
dprintk("%s: i2c error\n", __func__);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
return 0;
}
static int stv6110_read_regs(struct dvb_frontend *fe, u8 regs[],
int start, int len)
{
struct stv6110_priv *priv = fe->tuner_priv;
int rc;
u8 reg[] = { start };
struct i2c_msg msg[] = {
{
.addr = priv->i2c_address,
.flags = 0,
.buf = reg,
.len = 1,
}, {
.addr = priv->i2c_address,
.flags = I2C_M_RD,
.buf = regs,
.len = len,
},
};
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
rc = i2c_transfer(priv->i2c, msg, 2);
if (rc != 2)
dprintk("%s: i2c error\n", __func__);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
memcpy(&priv->regs[start], regs, len);
return 0;
}
static int stv6110_read_reg(struct dvb_frontend *fe, int start)
{
u8 buf[] = { 0 };
stv6110_read_regs(fe, buf, start, 1);
return buf[0];
}
static int stv6110_sleep(struct dvb_frontend *fe)
{
u8 reg[] = { 0 };
stv6110_write_regs(fe, reg, 0, 1);
return 0;
}
static u32 carrier_width(u32 symbol_rate, fe_rolloff_t rolloff)
{
u32 rlf;
switch (rolloff) {
case ROLLOFF_20:
rlf = 20;
break;
case ROLLOFF_25:
rlf = 25;
break;
default:
rlf = 35;
break;
}
return symbol_rate + ((symbol_rate * rlf) / 100);
}
static int stv6110_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
{
struct stv6110_priv *priv = fe->tuner_priv;
u8 r8, ret = 0x04;
int i;
if ((bandwidth / 2) > 36000000) /*BW/2 max=31+5=36 mhz for r8=31*/
r8 = 31;
else if ((bandwidth / 2) < 5000000) /* BW/2 min=5Mhz for F=0 */
r8 = 0;
else /*if 5 < BW/2 < 36*/
r8 = (bandwidth / 2) / 1000000 - 5;
/* ctrl3, RCCLKOFF = 0 Activate the calibration Clock */
/* ctrl3, CF = r8 Set the LPF value */
priv->regs[RSTV6110_CTRL3] &= ~((1 << 6) | 0x1f);
priv->regs[RSTV6110_CTRL3] |= (r8 & 0x1f);
stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL3], RSTV6110_CTRL3, 1);
/* stat1, CALRCSTRT = 1 Start LPF auto calibration*/
priv->regs[RSTV6110_STAT1] |= 0x02;
stv6110_write_regs(fe, &priv->regs[RSTV6110_STAT1], RSTV6110_STAT1, 1);
i = 0;
/* Wait for CALRCSTRT == 0 */
while ((i < 10) && (ret != 0)) {
ret = ((stv6110_read_reg(fe, RSTV6110_STAT1)) & 0x02);
mdelay(1); /* wait for LPF auto calibration */
i++;
}
/* RCCLKOFF = 1 calibration done, desactivate the calibration Clock */
priv->regs[RSTV6110_CTRL3] |= (1 << 6);
stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL3], RSTV6110_CTRL3, 1);
return 0;
}
static int stv6110_init(struct dvb_frontend *fe)
{
struct stv6110_priv *priv = fe->tuner_priv;
u8 buf0[] = { 0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e };
memcpy(priv->regs, buf0, 8);
/* K = (Reference / 1000000) - 16 */
priv->regs[RSTV6110_CTRL1] &= ~(0x1f << 3);
priv->regs[RSTV6110_CTRL1] |=
((((priv->mclk / 1000000) - 16) & 0x1f) << 3);
/* divisor value for the output clock */
priv->regs[RSTV6110_CTRL2] &= ~0xc0;
priv->regs[RSTV6110_CTRL2] |= (priv->clk_div << 6);
stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1], RSTV6110_CTRL1, 8);
msleep(1);
stv6110_set_bandwidth(fe, 72000000);
return 0;
}
static int stv6110_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
struct stv6110_priv *priv = fe->tuner_priv;
u32 nbsteps, divider, psd2, freq;
u8 regs[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
stv6110_read_regs(fe, regs, 0, 8);
/*N*/
divider = (priv->regs[RSTV6110_TUNING2] & 0x0f) << 8;
divider += priv->regs[RSTV6110_TUNING1];
/*R*/
nbsteps = (priv->regs[RSTV6110_TUNING2] >> 6) & 3;
/*p*/
psd2 = (priv->regs[RSTV6110_TUNING2] >> 4) & 1;
freq = divider * (priv->mclk / 1000);
freq /= (1 << (nbsteps + psd2));
freq /= 4;
*frequency = freq;
return 0;
}
static int stv6110_set_frequency(struct dvb_frontend *fe, u32 frequency)
{
struct stv6110_priv *priv = fe->tuner_priv;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
u8 ret = 0x04;
u32 divider, ref, p, presc, i, result_freq, vco_freq;
s32 p_calc, p_calc_opt = 1000, r_div, r_div_opt = 0, p_val;
s32 srate;
dprintk("%s, freq=%d kHz, mclk=%d Hz\n", __func__,
frequency, priv->mclk);
/* K = (Reference / 1000000) - 16 */
priv->regs[RSTV6110_CTRL1] &= ~(0x1f << 3);
priv->regs[RSTV6110_CTRL1] |=
((((priv->mclk / 1000000) - 16) & 0x1f) << 3);
/* BB_GAIN = db/2 */
if (fe->ops.set_property && fe->ops.get_property) {
srate = c->symbol_rate;
dprintk("%s: Get Frontend parameters: srate=%d\n",
__func__, srate);
} else
srate = 15000000;
priv->regs[RSTV6110_CTRL2] &= ~0x0f;
priv->regs[RSTV6110_CTRL2] |= (priv->gain & 0x0f);
if (frequency <= 1023000) {
p = 1;
presc = 0;
} else if (frequency <= 1300000) {
p = 1;
presc = 1;
} else if (frequency <= 2046000) {
p = 0;
presc = 0;
} else {
p = 0;
presc = 1;
}
/* DIV4SEL = p*/
priv->regs[RSTV6110_TUNING2] &= ~(1 << 4);
priv->regs[RSTV6110_TUNING2] |= (p << 4);
/* PRESC32ON = presc */
priv->regs[RSTV6110_TUNING2] &= ~(1 << 5);
priv->regs[RSTV6110_TUNING2] |= (presc << 5);
p_val = (int)(1 << (p + 1)) * 10;/* P = 2 or P = 4 */
for (r_div = 0; r_div <= 3; r_div++) {
p_calc = (priv->mclk / 100000);
p_calc /= (1 << (r_div + 1));
if ((abssub(p_calc, p_val)) < (abssub(p_calc_opt, p_val)))
r_div_opt = r_div;
p_calc_opt = (priv->mclk / 100000);
p_calc_opt /= (1 << (r_div_opt + 1));
}
ref = priv->mclk / ((1 << (r_div_opt + 1)) * (1 << (p + 1)));
divider = (((frequency * 1000) + (ref >> 1)) / ref);
/* RDIV = r_div_opt */
priv->regs[RSTV6110_TUNING2] &= ~(3 << 6);
priv->regs[RSTV6110_TUNING2] |= (((r_div_opt) & 3) << 6);
/* NDIV_MSB = MSB(divider) */
priv->regs[RSTV6110_TUNING2] &= ~0x0f;
priv->regs[RSTV6110_TUNING2] |= (((divider) >> 8) & 0x0f);
/* NDIV_LSB, LSB(divider) */
priv->regs[RSTV6110_TUNING1] = (divider & 0xff);
/* CALVCOSTRT = 1 VCO Auto Calibration */
priv->regs[RSTV6110_STAT1] |= 0x04;
stv6110_write_regs(fe, &priv->regs[RSTV6110_CTRL1],
RSTV6110_CTRL1, 8);
i = 0;
/* Wait for CALVCOSTRT == 0 */
while ((i < 10) && (ret != 0)) {
ret = ((stv6110_read_reg(fe, RSTV6110_STAT1)) & 0x04);
msleep(1); /* wait for VCO auto calibration */
i++;
}
ret = stv6110_read_reg(fe, RSTV6110_STAT1);
stv6110_get_frequency(fe, &result_freq);
vco_freq = divider * ((priv->mclk / 1000) / ((1 << (r_div_opt + 1))));
dprintk("%s, stat1=%x, lo_freq=%d kHz, vco_frec=%d kHz\n", __func__,
ret, result_freq, vco_freq);
return 0;
}
static int stv6110_set_params(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
u32 bandwidth = carrier_width(c->symbol_rate, c->rolloff);
stv6110_set_frequency(fe, c->frequency);
stv6110_set_bandwidth(fe, bandwidth);
return 0;
}
static int stv6110_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
{
struct stv6110_priv *priv = fe->tuner_priv;
u8 r8 = 0;
u8 regs[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
stv6110_read_regs(fe, regs, 0, 8);
/* CF */
r8 = priv->regs[RSTV6110_CTRL3] & 0x1f;
*bandwidth = (r8 + 5) * 2000000;/* x2 for ZIF tuner BW/2 = F+5 Mhz */
return 0;
}
static struct dvb_tuner_ops stv6110_tuner_ops = {
.info = {
.name = "ST STV6110",
.frequency_min = 950000,
.frequency_max = 2150000,
.frequency_step = 1000,
},
.init = stv6110_init,
.release = stv6110_release,
.sleep = stv6110_sleep,
.set_params = stv6110_set_params,
.get_frequency = stv6110_get_frequency,
.set_frequency = stv6110_set_frequency,
.get_bandwidth = stv6110_get_bandwidth,
.set_bandwidth = stv6110_set_bandwidth,
};
struct dvb_frontend *stv6110_attach(struct dvb_frontend *fe,
const struct stv6110_config *config,
struct i2c_adapter *i2c)
{
struct stv6110_priv *priv = NULL;
u8 reg0[] = { 0x00, 0x07, 0x11, 0xdc, 0x85, 0x17, 0x01, 0xe6, 0x1e };
struct i2c_msg msg[] = {
{
.addr = config->i2c_address,
.flags = 0,
.buf = reg0,
.len = 9
}
};
int ret;
/* divisor value for the output clock */
reg0[2] &= ~0xc0;
reg0[2] |= (config->clk_div << 6);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
ret = i2c_transfer(i2c, msg, 1);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
if (ret != 1)
return NULL;
priv = kzalloc(sizeof(struct stv6110_priv), GFP_KERNEL);
if (priv == NULL)
return NULL;
priv->i2c_address = config->i2c_address;
priv->i2c = i2c;
priv->mclk = config->mclk;
priv->clk_div = config->clk_div;
priv->gain = config->gain;
memcpy(&priv->regs, &reg0[1], 8);
memcpy(&fe->ops.tuner_ops, &stv6110_tuner_ops,
sizeof(struct dvb_tuner_ops));
fe->tuner_priv = priv;
printk(KERN_INFO "STV6110 attached on addr=%x!\n", priv->i2c_address);
return fe;
}
EXPORT_SYMBOL(stv6110_attach);
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_DESCRIPTION("ST STV6110 driver");
MODULE_AUTHOR("Igor M. Liplianin");
MODULE_LICENSE("GPL");