linux/arch/arm/mach-omap2/gpmc-smc91x.c

187 lines
4.8 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-omap2/gpmc-smc91x.c
*
* Copyright (C) 2009 Nokia Corporation
* Contact: Tony Lindgren
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smc91x.h>
#include "gpmc.h"
#include "gpmc-smc91x.h"
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-08-31 17:59:07 +00:00
#include "soc.h"
static struct omap_smc91x_platform_data *gpmc_cfg;
static struct resource gpmc_smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ,
},
};
static struct smc91x_platdata gpmc_smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
.leda = RPC_LED_100_10,
.ledb = RPC_LED_TX_RX,
};
static struct platform_device gpmc_smc91x_device = {
.name = "smc91x",
.id = -1,
.dev = {
.platform_data = &gpmc_smc91x_info,
},
.num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
.resource = gpmc_smc91x_resources,
};
static struct gpmc_settings smc91x_settings = {
.device_width = GPMC_DEVWIDTH_16BIT,
};
/*
* Set the gpmc timings for smc91c96. The timings are taken
* from the data sheet available at:
* http://www.smsc.com/main/catalog/lan91c96.html
* REVISIT: Level shifters can add at least to the access latency.
*/
static int smc91c96_gpmc_retime(void)
{
struct gpmc_timings t;
struct gpmc_device_timings dev_t;
const int t3 = 10; /* Figure 12.2 read and 12.4 write */
const int t4_r = 20; /* Figure 12.2 read */
const int t4_w = 5; /* Figure 12.4 write */
const int t5 = 25; /* Figure 12.2 read */
const int t6 = 15; /* Figure 12.2 read */
const int t7 = 5; /* Figure 12.4 write */
const int t8 = 5; /* Figure 12.4 write */
const int t20 = 185; /* Figure 12.2 read and 12.4 write */
/*
* FIXME: Calculate the address and data bus muxed timings.
* Note that at least adv_rd_off needs to be changed according
* to omap3430 TRM Figure 11-11. Are the sdp boards using the
* FPGA in between smc91x and omap as the timings are different
* from above?
*/
if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
return 0;
memset(&dev_t, 0, sizeof(dev_t));
dev_t.t_oeasu = t3 * 1000;
dev_t.t_oe = t5 * 1000;
dev_t.t_cez_r = t4_r * 1000;
dev_t.t_oez = t6 * 1000;
dev_t.t_rd_cycle = (t20 - t3) * 1000;
dev_t.t_weasu = t3 * 1000;
dev_t.t_wpl = t7 * 1000;
dev_t.t_wph = t8 * 1000;
dev_t.t_cez_w = t4_w * 1000;
dev_t.t_wr_cycle = (t20 - t3) * 1000;
gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
}
/*
* Initialize smc91x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
* or in the bootloader.
*/
void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
{
unsigned long cs_mem_base;
int ret;
gpmc_cfg = board_data;
if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
gpmc_cfg->retime = smc91c96_gpmc_retime;
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
return;
}
gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
smc91x_settings.mux_add_data = GPMC_MUX_AD;
if (gpmc_cfg->flags & GPMC_READ_MON)
smc91x_settings.wait_on_read = true;
if (gpmc_cfg->flags & GPMC_WRITE_MON)
smc91x_settings.wait_on_write = true;
if (gpmc_cfg->wait_pin)
smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
if (ret < 0)
goto free1;
if (gpmc_cfg->retime) {
ret = gpmc_cfg->retime();
if (ret != 0)
goto free1;
}
if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
goto free1;
gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
if (gpmc_cfg->gpio_pwrdwn) {
ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
if (ret)
goto free2;
}
if (gpmc_cfg->gpio_reset) {
ret = gpio_request_one(gpmc_cfg->gpio_reset,
GPIOF_OUT_INIT_LOW, "SMC91X reset");
if (ret)
goto free3;
gpio_set_value(gpmc_cfg->gpio_reset, 1);
msleep(100);
gpio_set_value(gpmc_cfg->gpio_reset, 0);
}
if (platform_device_register(&gpmc_smc91x_device) < 0) {
printk(KERN_ERR "Unable to register smc91x device\n");
gpio_free(gpmc_cfg->gpio_reset);
goto free3;
}
return;
free3:
if (gpmc_cfg->gpio_pwrdwn)
gpio_free(gpmc_cfg->gpio_pwrdwn);
free2:
gpio_free(gpmc_cfg->gpio_irq);
free1:
gpmc_cs_free(gpmc_cfg->cs);
printk(KERN_ERR "Could not initialize smc91x\n");
}