linux/kernel/time/Kconfig

150 lines
3.8 KiB
Plaintext
Raw Normal View History

#
# Timer subsystem related configuration options
#
# Options selectable by arch Kconfig
# Watchdog function for clocksources to detect instabilities
config CLOCKSOURCE_WATCHDOG
bool
# Architecture has extra clocksource data
config ARCH_CLOCKSOURCE_DATA
bool
# Platforms has a persistent clock
config ALWAYS_USE_PERSISTENT_CLOCK
bool
default n
# Timekeeping vsyscall support
config GENERIC_TIME_VSYSCALL
bool
# Timekeeping vsyscall support
config GENERIC_TIME_VSYSCALL_OLD
bool
# ktime_t scalar 64bit nsec representation
config KTIME_SCALAR
bool
# Old style timekeeping
config ARCH_USES_GETTIMEOFFSET
bool
# The generic clock events infrastructure
config GENERIC_CLOCKEVENTS
bool
# Migration helper. Builds, but does not invoke
config GENERIC_CLOCKEVENTS_BUILD
bool
default y
depends on GENERIC_CLOCKEVENTS
# Architecture can handle broadcast in a driver-agnostic way
config ARCH_HAS_TICK_BROADCAST
bool
# Clockevents broadcasting infrastructure
config GENERIC_CLOCKEVENTS_BROADCAST
bool
depends on GENERIC_CLOCKEVENTS
# Automatically adjust the min. reprogramming time for
# clock event device
config GENERIC_CLOCKEVENTS_MIN_ADJUST
bool
# Generic update of CMOS clock
config GENERIC_CMOS_UPDATE
bool
if GENERIC_CLOCKEVENTS
menu "Timers subsystem"
nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
# Core internal switch. Selected by NO_HZ_COMMON / HIGH_RES_TIMERS. This is
# only related to the tick functionality. Oneshot clockevent devices
# are supported independ of this.
config TICK_ONESHOT
bool
nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
config NO_HZ_COMMON
bool
depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
choice
prompt "Timer tick handling"
default NO_HZ_IDLE if NO_HZ
config HZ_PERIODIC
bool "Periodic timer ticks (constant rate, no dynticks)"
help
This option keeps the tick running periodically at a constant
rate, even when the CPU doesn't need it.
config NO_HZ_IDLE
bool "Idle dynticks system (tickless idle)"
depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
select NO_HZ_COMMON
help
This option enables a tickless idle system: timer interrupts
will only trigger on an as-needed basis when the system is idle.
This is usually interesting for energy saving.
Most of the time you want to say Y here.
config NO_HZ_FULL
bool "Full dynticks system (tickless)"
nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
# NO_HZ_COMMON dependency
nohz: Unhide full dynticks feature from its dependencies The full dynticks feature only shows up when all its Kconfig dependencies are met (RCU nocbs, RCU user mode, ...) This is far from being user friendly as those who want to activate this feature need to look into the Kconfig files and iterate through each dependency then activate these by hand in order to show and select the full dynticks Kconfig option. So process the other way around: show up the Kconfig option if the minimal low level dependencies are met and activate the high level ones when we enable the feature. Note there is one exception in the picture: CONFIG_VIRT_CPU_ACCOUNTING_GEN is part of a Kconfig choice menu and it appears we can't select it from another Kconfig selection when it's under such layout. So for now this particular item stays as a passive dependency. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
# We need at least one periodic CPU for timekeeping
depends on SMP
# RCU_USER_QS dependency
depends on HAVE_CONTEXT_TRACKING
nohz: Unhide full dynticks feature from its dependencies The full dynticks feature only shows up when all its Kconfig dependencies are met (RCU nocbs, RCU user mode, ...) This is far from being user friendly as those who want to activate this feature need to look into the Kconfig files and iterate through each dependency then activate these by hand in order to show and select the full dynticks Kconfig option. So process the other way around: show up the Kconfig option if the minimal low level dependencies are met and activate the high level ones when we enable the feature. Note there is one exception in the picture: CONFIG_VIRT_CPU_ACCOUNTING_GEN is part of a Kconfig choice menu and it appears we can't select it from another Kconfig selection when it's under such layout. So for now this particular item stays as a passive dependency. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
# RCU_NOCB_CPU dependency
depends on TREE_RCU || TREE_PREEMPT_RCU
depends on VIRT_CPU_ACCOUNTING_GEN
nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON We are planning to convert the dynticks Kconfig options layout into a choice menu. The user must be able to easily pick any of the following implementations: constant periodic tick, idle dynticks, full dynticks. As this implies a mutual exclusion, the two dynticks implementions need to converge on the selection of a common Kconfig option in order to ease the sharing of a common infrastructure. It would thus seem pretty natural to reuse CONFIG_NO_HZ to that end. It already implements all the idle dynticks code and the full dynticks depends on all that code for now. So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ. On the other hand we want to stay backward compatible: if CONFIG_NO_HZ is set in an older config file, we want to enable CONFIG_NO_HZ_IDLE by default. But we can't afford both at the same time or we run into a circular dependency: 1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select CONFIG_NO_HZ 2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE We might be able to support that from Kconfig/Kbuild but it may not be wise to introduce such a confusing behaviour. So to solve this, create a new CONFIG_NO_HZ_COMMON option which gathers the common code between idle and full dynticks (that common code for now is simply the idle dynticks code) and select it from their referring Kconfig. Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ to it for backward compatibility. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
select NO_HZ_COMMON
nohz: Unhide full dynticks feature from its dependencies The full dynticks feature only shows up when all its Kconfig dependencies are met (RCU nocbs, RCU user mode, ...) This is far from being user friendly as those who want to activate this feature need to look into the Kconfig files and iterate through each dependency then activate these by hand in order to show and select the full dynticks Kconfig option. So process the other way around: show up the Kconfig option if the minimal low level dependencies are met and activate the high level ones when we enable the feature. Note there is one exception in the picture: CONFIG_VIRT_CPU_ACCOUNTING_GEN is part of a Kconfig choice menu and it appears we can't select it from another Kconfig selection when it's under such layout. So for now this particular item stays as a passive dependency. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2011-08-10 21:21:01 +00:00
select RCU_USER_QS
select RCU_NOCB_CPU
select CONTEXT_TRACKING_FORCE
help
Adaptively try to shutdown the tick whenever possible, even when
nohz: Basic full dynticks interface For extreme usecases such as Real Time or HPC, having the ability to shutdown the tick when a single task runs on a CPU is a desired feature: * Reducing the amount of interrupts improves throughput for CPU-bound tasks. The CPU is less distracted from its real job, from an execution time and from the cache point of views. * This also improve latency response as we have less critical sections. Start with introducing a very simple interface to define full dynticks CPU: use a boot time option defined cpumask through the "nohz_extended=" kernel parameter. CPUs that are part of this range will have their tick shutdown whenever possible: provided they run a single task and they don't do kernel activity that require the periodic tick. These details will be later documented in Documentation/* An online CPU must be kept outside this range to handle the timekeeping. Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-12-18 16:32:19 +00:00
the CPU is running tasks. Typically this requires running a single
task on the CPU. Chances for running tickless are maximized when
the task mostly runs in userspace and has few kernel activity.
You need to fill up the nohz_full boot parameter with the
nohz: Basic full dynticks interface For extreme usecases such as Real Time or HPC, having the ability to shutdown the tick when a single task runs on a CPU is a desired feature: * Reducing the amount of interrupts improves throughput for CPU-bound tasks. The CPU is less distracted from its real job, from an execution time and from the cache point of views. * This also improve latency response as we have less critical sections. Start with introducing a very simple interface to define full dynticks CPU: use a boot time option defined cpumask through the "nohz_extended=" kernel parameter. CPUs that are part of this range will have their tick shutdown whenever possible: provided they run a single task and they don't do kernel activity that require the periodic tick. These details will be later documented in Documentation/* An online CPU must be kept outside this range to handle the timekeeping. Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christoph Lameter <cl@linux.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Gilad Ben Yossef <gilad@benyossef.com> Cc: Hakan Akkan <hakanakkan@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kevin Hilman <khilman@linaro.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-12-18 16:32:19 +00:00
desired range of dynticks CPUs.
This is implemented at the expense of some overhead in user <-> kernel
transitions: syscalls, exceptions and interrupts. Even when it's
dynamically off.
Say N.
endchoice
config NO_HZ
bool "Old Idle dynticks config"
depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
help
This is the old config entry that enables dynticks idle.
We keep it around for a little while to enforce backward
compatibility with older config files.
config HIGH_RES_TIMERS
bool "High Resolution Timer Support"
depends on !ARCH_USES_GETTIMEOFFSET && GENERIC_CLOCKEVENTS
select TICK_ONESHOT
help
This option enables high resolution timer support. If your
hardware is not capable then this option only increases
the size of the kernel image.
endmenu
endif