linux/net/core/rtnetlink.c

6575 lines
160 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Routing netlink socket interface: protocol independent part.
*
* Authors: Alexey Kuznetsov, <kuznet@ms2.inr.ac.ru>
*
* Fixes:
* Vitaly E. Lavrov RTA_OK arithmetic was wrong.
*/
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/capability.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/security.h>
#include <linux/mutex.h>
#include <linux/if_addr.h>
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
#include <linux/if_bridge.h>
#include <linux/if_vlan.h>
#include <linux/pci.h>
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
#include <linux/etherdevice.h>
#include <linux/bpf.h>
#include <linux/uaccess.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <net/ip.h>
#include <net/protocol.h>
#include <net/arp.h>
#include <net/route.h>
#include <net/udp.h>
#include <net/tcp.h>
#include <net/sock.h>
#include <net/pkt_sched.h>
#include <net/fib_rules.h>
#include <net/rtnetlink.h>
#include <net/net_namespace.h>
#include <net/devlink.h>
#if IS_ENABLED(CONFIG_IPV6)
#include <net/addrconf.h>
#endif
#include "dev.h"
net: bridge: add support for user-controlled bool options We have been adding many new bridge options, a big number of which are boolean but still take up netlink attribute ids and waste space in the skb. Recently we discussed learning from link-local packets[1] and decided yet another new boolean option will be needed, thus introducing this API to save some bridge nl space. The API supports changing the value of multiple boolean options at once via the br_boolopt_multi struct which has an optmask (which options to set, bit per opt) and optval (options' new values). Future boolean options will only be added to the br_boolopt_id enum and then will have to be handled in br_boolopt_toggle/get. The API will automatically add the ability to change and export them via netlink, sysfs can use the single boolopt function versions to do the same. The behaviour with failing/succeeding is the same as with normal netlink option changing. If an option requires mapping to internal kernel flag or needs special configuration to be enabled then it should be handled in br_boolopt_toggle. It should also be able to retrieve an option's current state via br_boolopt_get. v2: WARN_ON() on unsupported option as that shouldn't be possible and also will help catch people who add new options without handling them for both set and get. Pass down extack so if an option desires it could set it on error and be more user-friendly. [1] https://www.spinics.net/lists/netdev/msg532698.html Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-24 02:34:20 +00:00
#define RTNL_MAX_TYPE 50
bridge: Add backup nexthop ID support Add a new bridge port attribute that allows attaching a nexthop object ID to an skb that is redirected to a backup bridge port with VLAN tunneling enabled. Specifically, when redirecting a known unicast packet, read the backup nexthop ID from the bridge port that lost its carrier and set it in the bridge control block of the skb before forwarding it via the backup port. Note that reading the ID from the bridge port should not result in a cache miss as the ID is added next to the 'backup_port' field that was already accessed. After this change, the 'state' field still stays on the first cache line, together with other data path related fields such as 'flags and 'vlgrp': struct net_bridge_port { struct net_bridge * br; /* 0 8 */ struct net_device * dev; /* 8 8 */ netdevice_tracker dev_tracker; /* 16 0 */ struct list_head list; /* 16 16 */ long unsigned int flags; /* 32 8 */ struct net_bridge_vlan_group * vlgrp; /* 40 8 */ struct net_bridge_port * backup_port; /* 48 8 */ u32 backup_nhid; /* 56 4 */ u8 priority; /* 60 1 */ u8 state; /* 61 1 */ u16 port_no; /* 62 2 */ /* --- cacheline 1 boundary (64 bytes) --- */ [...] } __attribute__((__aligned__(8))); When forwarding an skb via a bridge port that has VLAN tunneling enabled, check if the backup nexthop ID stored in the bridge control block is valid (i.e., not zero). If so, instead of attaching the pre-allocated metadata (that only has the tunnel key set), allocate a new metadata, set both the tunnel key and the nexthop object ID and attach it to the skb. By default, do not dump the new attribute to user space as a value of zero is an invalid nexthop object ID. The above is useful for EVPN multihoming. When one of the links composing an Ethernet Segment (ES) fails, traffic needs to be redirected towards the host via one of the other ES peers. For example, if a host is multihomed to three different VTEPs, the backup port of each ES link needs to be set to the VXLAN device and the backup nexthop ID needs to point to an FDB nexthop group that includes the IP addresses of the other two VTEPs. The VXLAN driver will extract the ID from the metadata of the redirected skb, calculate its flow hash and forward it towards one of the other VTEPs. If the ID does not exist, or represents an invalid nexthop object, the VXLAN driver will drop the skb. This relieves the bridge driver from the need to validate the ID. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-17 08:12:28 +00:00
#define RTNL_SLAVE_MAX_TYPE 44
struct rtnl_link {
rtnl_doit_func doit;
rtnl_dumpit_func dumpit;
struct module *owner;
unsigned int flags;
struct rcu_head rcu;
};
static DEFINE_MUTEX(rtnl_mutex);
void rtnl_lock(void)
{
mutex_lock(&rtnl_mutex);
}
EXPORT_SYMBOL(rtnl_lock);
int rtnl_lock_killable(void)
{
return mutex_lock_killable(&rtnl_mutex);
}
EXPORT_SYMBOL(rtnl_lock_killable);
static struct sk_buff *defer_kfree_skb_list;
void rtnl_kfree_skbs(struct sk_buff *head, struct sk_buff *tail)
{
if (head && tail) {
tail->next = defer_kfree_skb_list;
defer_kfree_skb_list = head;
}
}
EXPORT_SYMBOL(rtnl_kfree_skbs);
void __rtnl_unlock(void)
{
struct sk_buff *head = defer_kfree_skb_list;
defer_kfree_skb_list = NULL;
/* Ensure that we didn't actually add any TODO item when __rtnl_unlock()
* is used. In some places, e.g. in cfg80211, we have code that will do
* something like
* rtnl_lock()
* wiphy_lock()
* ...
* rtnl_unlock()
*
* and because netdev_run_todo() acquires the RTNL for items on the list
* we could cause a situation such as this:
* Thread 1 Thread 2
* rtnl_lock()
* unregister_netdevice()
* __rtnl_unlock()
* rtnl_lock()
* wiphy_lock()
* rtnl_unlock()
* netdev_run_todo()
* __rtnl_unlock()
*
* // list not empty now
* // because of thread 2
* rtnl_lock()
* while (!list_empty(...))
* rtnl_lock()
* wiphy_lock()
* **** DEADLOCK ****
*
* However, usage of __rtnl_unlock() is rare, and so we can ensure that
* it's not used in cases where something is added to do the list.
*/
WARN_ON(!list_empty(&net_todo_list));
mutex_unlock(&rtnl_mutex);
while (head) {
struct sk_buff *next = head->next;
kfree_skb(head);
cond_resched();
head = next;
}
}
void rtnl_unlock(void)
{
/* This fellow will unlock it for us. */
netdev_run_todo();
}
EXPORT_SYMBOL(rtnl_unlock);
int rtnl_trylock(void)
{
return mutex_trylock(&rtnl_mutex);
}
EXPORT_SYMBOL(rtnl_trylock);
int rtnl_is_locked(void)
{
return mutex_is_locked(&rtnl_mutex);
}
EXPORT_SYMBOL(rtnl_is_locked);
bool refcount_dec_and_rtnl_lock(refcount_t *r)
{
return refcount_dec_and_mutex_lock(r, &rtnl_mutex);
}
EXPORT_SYMBOL(refcount_dec_and_rtnl_lock);
#ifdef CONFIG_PROVE_LOCKING
bool lockdep_rtnl_is_held(void)
{
return lockdep_is_held(&rtnl_mutex);
}
EXPORT_SYMBOL(lockdep_rtnl_is_held);
#endif /* #ifdef CONFIG_PROVE_LOCKING */
static struct rtnl_link __rcu *__rcu *rtnl_msg_handlers[RTNL_FAMILY_MAX + 1];
static inline int rtm_msgindex(int msgtype)
{
int msgindex = msgtype - RTM_BASE;
/*
* msgindex < 0 implies someone tried to register a netlink
* control code. msgindex >= RTM_NR_MSGTYPES may indicate that
* the message type has not been added to linux/rtnetlink.h
*/
BUG_ON(msgindex < 0 || msgindex >= RTM_NR_MSGTYPES);
return msgindex;
}
static struct rtnl_link *rtnl_get_link(int protocol, int msgtype)
{
struct rtnl_link __rcu **tab;
if (protocol >= ARRAY_SIZE(rtnl_msg_handlers))
protocol = PF_UNSPEC;
tab = rcu_dereference_rtnl(rtnl_msg_handlers[protocol]);
if (!tab)
tab = rcu_dereference_rtnl(rtnl_msg_handlers[PF_UNSPEC]);
return rcu_dereference_rtnl(tab[msgtype]);
}
static int rtnl_register_internal(struct module *owner,
int protocol, int msgtype,
rtnl_doit_func doit, rtnl_dumpit_func dumpit,
unsigned int flags)
{
struct rtnl_link *link, *old;
struct rtnl_link __rcu **tab;
int msgindex;
int ret = -ENOBUFS;
BUG_ON(protocol < 0 || protocol > RTNL_FAMILY_MAX);
msgindex = rtm_msgindex(msgtype);
rtnl_lock();
tab = rtnl_dereference(rtnl_msg_handlers[protocol]);
if (tab == NULL) {
tab = kcalloc(RTM_NR_MSGTYPES, sizeof(void *), GFP_KERNEL);
if (!tab)
goto unlock;
/* ensures we see the 0 stores */
rcu_assign_pointer(rtnl_msg_handlers[protocol], tab);
}
old = rtnl_dereference(tab[msgindex]);
if (old) {
link = kmemdup(old, sizeof(*old), GFP_KERNEL);
if (!link)
goto unlock;
} else {
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link)
goto unlock;
}
WARN_ON(link->owner && link->owner != owner);
link->owner = owner;
WARN_ON(doit && link->doit && link->doit != doit);
if (doit)
link->doit = doit;
WARN_ON(dumpit && link->dumpit && link->dumpit != dumpit);
if (dumpit)
link->dumpit = dumpit;
WARN_ON(rtnl_msgtype_kind(msgtype) != RTNL_KIND_DEL &&
(flags & RTNL_FLAG_BULK_DEL_SUPPORTED));
link->flags |= flags;
/* publish protocol:msgtype */
rcu_assign_pointer(tab[msgindex], link);
ret = 0;
if (old)
kfree_rcu(old, rcu);
unlock:
rtnl_unlock();
return ret;
}
/**
* rtnl_register_module - Register a rtnetlink message type
*
* @owner: module registering the hook (THIS_MODULE)
* @protocol: Protocol family or PF_UNSPEC
* @msgtype: rtnetlink message type
* @doit: Function pointer called for each request message
* @dumpit: Function pointer called for each dump request (NLM_F_DUMP) message
* @flags: rtnl_link_flags to modify behaviour of doit/dumpit functions
*
* Like rtnl_register, but for use by removable modules.
*/
int rtnl_register_module(struct module *owner,
int protocol, int msgtype,
rtnl_doit_func doit, rtnl_dumpit_func dumpit,
unsigned int flags)
{
return rtnl_register_internal(owner, protocol, msgtype,
doit, dumpit, flags);
}
EXPORT_SYMBOL_GPL(rtnl_register_module);
/**
* rtnl_register - Register a rtnetlink message type
* @protocol: Protocol family or PF_UNSPEC
* @msgtype: rtnetlink message type
* @doit: Function pointer called for each request message
* @dumpit: Function pointer called for each dump request (NLM_F_DUMP) message
* @flags: rtnl_link_flags to modify behaviour of doit/dumpit functions
*
* Registers the specified function pointers (at least one of them has
* to be non-NULL) to be called whenever a request message for the
* specified protocol family and message type is received.
*
* The special protocol family PF_UNSPEC may be used to define fallback
* function pointers for the case when no entry for the specific protocol
* family exists.
*/
void rtnl_register(int protocol, int msgtype,
rtnl_doit_func doit, rtnl_dumpit_func dumpit,
unsigned int flags)
{
int err;
err = rtnl_register_internal(NULL, protocol, msgtype, doit, dumpit,
flags);
if (err)
pr_err("Unable to register rtnetlink message handler, "
"protocol = %d, message type = %d\n", protocol, msgtype);
}
/**
* rtnl_unregister - Unregister a rtnetlink message type
* @protocol: Protocol family or PF_UNSPEC
* @msgtype: rtnetlink message type
*
* Returns 0 on success or a negative error code.
*/
int rtnl_unregister(int protocol, int msgtype)
{
struct rtnl_link __rcu **tab;
struct rtnl_link *link;
int msgindex;
BUG_ON(protocol < 0 || protocol > RTNL_FAMILY_MAX);
msgindex = rtm_msgindex(msgtype);
rtnl_lock();
tab = rtnl_dereference(rtnl_msg_handlers[protocol]);
if (!tab) {
rtnl_unlock();
return -ENOENT;
}
link = rtnl_dereference(tab[msgindex]);
RCU_INIT_POINTER(tab[msgindex], NULL);
rtnl_unlock();
kfree_rcu(link, rcu);
return 0;
}
EXPORT_SYMBOL_GPL(rtnl_unregister);
/**
* rtnl_unregister_all - Unregister all rtnetlink message type of a protocol
* @protocol : Protocol family or PF_UNSPEC
*
* Identical to calling rtnl_unregster() for all registered message types
* of a certain protocol family.
*/
void rtnl_unregister_all(int protocol)
{
struct rtnl_link __rcu **tab;
struct rtnl_link *link;
int msgindex;
BUG_ON(protocol < 0 || protocol > RTNL_FAMILY_MAX);
rtnl_lock();
tab = rtnl_dereference(rtnl_msg_handlers[protocol]);
if (!tab) {
rtnl_unlock();
return;
}
RCU_INIT_POINTER(rtnl_msg_handlers[protocol], NULL);
for (msgindex = 0; msgindex < RTM_NR_MSGTYPES; msgindex++) {
link = rtnl_dereference(tab[msgindex]);
if (!link)
continue;
RCU_INIT_POINTER(tab[msgindex], NULL);
kfree_rcu(link, rcu);
}
rtnl_unlock();
synchronize_net();
kfree(tab);
}
EXPORT_SYMBOL_GPL(rtnl_unregister_all);
static LIST_HEAD(link_ops);
static const struct rtnl_link_ops *rtnl_link_ops_get(const char *kind)
{
const struct rtnl_link_ops *ops;
list_for_each_entry(ops, &link_ops, list) {
if (!strcmp(ops->kind, kind))
return ops;
}
return NULL;
}
/**
* __rtnl_link_register - Register rtnl_link_ops with rtnetlink.
* @ops: struct rtnl_link_ops * to register
*
* The caller must hold the rtnl_mutex. This function should be used
* by drivers that create devices during module initialization. It
* must be called before registering the devices.
*
* Returns 0 on success or a negative error code.
*/
int __rtnl_link_register(struct rtnl_link_ops *ops)
{
if (rtnl_link_ops_get(ops->kind))
return -EEXIST;
/* The check for alloc/setup is here because if ops
* does not have that filled up, it is not possible
* to use the ops for creating device. So do not
* fill up dellink as well. That disables rtnl_dellink.
*/
if ((ops->alloc || ops->setup) && !ops->dellink)
ops->dellink = unregister_netdevice_queue;
list_add_tail(&ops->list, &link_ops);
return 0;
}
EXPORT_SYMBOL_GPL(__rtnl_link_register);
/**
* rtnl_link_register - Register rtnl_link_ops with rtnetlink.
* @ops: struct rtnl_link_ops * to register
*
* Returns 0 on success or a negative error code.
*/
int rtnl_link_register(struct rtnl_link_ops *ops)
{
int err;
/* Sanity-check max sizes to avoid stack buffer overflow. */
if (WARN_ON(ops->maxtype > RTNL_MAX_TYPE ||
ops->slave_maxtype > RTNL_SLAVE_MAX_TYPE))
return -EINVAL;
rtnl_lock();
err = __rtnl_link_register(ops);
rtnl_unlock();
return err;
}
EXPORT_SYMBOL_GPL(rtnl_link_register);
static void __rtnl_kill_links(struct net *net, struct rtnl_link_ops *ops)
{
struct net_device *dev;
LIST_HEAD(list_kill);
for_each_netdev(net, dev) {
if (dev->rtnl_link_ops == ops)
ops->dellink(dev, &list_kill);
}
unregister_netdevice_many(&list_kill);
}
/**
* __rtnl_link_unregister - Unregister rtnl_link_ops from rtnetlink.
* @ops: struct rtnl_link_ops * to unregister
*
* The caller must hold the rtnl_mutex and guarantee net_namespace_list
* integrity (hold pernet_ops_rwsem for writing to close the race
* with setup_net() and cleanup_net()).
*/
void __rtnl_link_unregister(struct rtnl_link_ops *ops)
{
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
struct net *net;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
for_each_net(net) {
__rtnl_kill_links(net, ops);
}
list_del(&ops->list);
}
EXPORT_SYMBOL_GPL(__rtnl_link_unregister);
/* Return with the rtnl_lock held when there are no network
* devices unregistering in any network namespace.
*/
static void rtnl_lock_unregistering_all(void)
{
struct net *net;
bool unregistering;
DEFINE_WAIT_FUNC(wait, woken_wake_function);
add_wait_queue(&netdev_unregistering_wq, &wait);
for (;;) {
unregistering = false;
rtnl_lock();
/* We held write locked pernet_ops_rwsem, and parallel
* setup_net() and cleanup_net() are not possible.
*/
for_each_net(net) {
if (atomic_read(&net->dev_unreg_count) > 0) {
unregistering = true;
break;
}
}
if (!unregistering)
break;
__rtnl_unlock();
wait_woken(&wait, TASK_UNINTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
}
remove_wait_queue(&netdev_unregistering_wq, &wait);
}
/**
* rtnl_link_unregister - Unregister rtnl_link_ops from rtnetlink.
* @ops: struct rtnl_link_ops * to unregister
*/
void rtnl_link_unregister(struct rtnl_link_ops *ops)
{
/* Close the race with setup_net() and cleanup_net() */
down_write(&pernet_ops_rwsem);
rtnl_lock_unregistering_all();
__rtnl_link_unregister(ops);
rtnl_unlock();
up_write(&pernet_ops_rwsem);
}
EXPORT_SYMBOL_GPL(rtnl_link_unregister);
static size_t rtnl_link_get_slave_info_data_size(const struct net_device *dev)
{
struct net_device *master_dev;
const struct rtnl_link_ops *ops;
size_t size = 0;
rcu_read_lock();
master_dev = netdev_master_upper_dev_get_rcu((struct net_device *)dev);
if (!master_dev)
goto out;
ops = master_dev->rtnl_link_ops;
rtnetlink: fix oops in rtnl_link_get_slave_info_data_size We should check whether rtnetlink link operations are defined before calling get_slave_size(). Without this, the following oops can occur when adding a tap device to OVS. [ 87.839553] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 87.839595] IP: [<ffffffff813d47c0>] if_nlmsg_size+0xf0/0x220 [...] [ 87.840651] Call Trace: [ 87.840664] [<ffffffff813d694b>] ? rtmsg_ifinfo+0x2b/0x100 [ 87.840688] [<ffffffff813c8340>] ? __netdev_adjacent_dev_insert+0x150/0x1a0 [ 87.840718] [<ffffffff813d6a50>] ? rtnetlink_event+0x30/0x40 [ 87.840742] [<ffffffff814b4144>] ? notifier_call_chain+0x44/0x70 [ 87.840768] [<ffffffff813c8946>] ? __netdev_upper_dev_link+0x3c6/0x3f0 [ 87.840798] [<ffffffffa0678d6c>] ? netdev_create+0xcc/0x160 [openvswitch] [ 87.840828] [<ffffffffa06781ea>] ? ovs_vport_add+0x4a/0xd0 [openvswitch] [ 87.840857] [<ffffffffa0670139>] ? new_vport+0x9/0x50 [openvswitch] [ 87.840884] [<ffffffffa067279e>] ? ovs_vport_cmd_new+0x11e/0x210 [openvswitch] [ 87.840915] [<ffffffff813f3efa>] ? genl_family_rcv_msg+0x19a/0x360 [ 87.840941] [<ffffffff813f40c0>] ? genl_family_rcv_msg+0x360/0x360 [ 87.840967] [<ffffffff813f4139>] ? genl_rcv_msg+0x79/0xc0 [ 87.840991] [<ffffffff813b6cf9>] ? __kmalloc_reserve.isra.25+0x29/0x80 [ 87.841018] [<ffffffff813f2389>] ? netlink_rcv_skb+0xa9/0xc0 [ 87.841042] [<ffffffff813f27cf>] ? genl_rcv+0x1f/0x30 [ 87.841064] [<ffffffff813f1988>] ? netlink_unicast+0xe8/0x1e0 [ 87.841088] [<ffffffff813f1d9a>] ? netlink_sendmsg+0x31a/0x750 [ 87.841113] [<ffffffff813aee96>] ? sock_sendmsg+0x86/0xc0 [ 87.841136] [<ffffffff813c960d>] ? __netdev_update_features+0x4d/0x200 [ 87.841163] [<ffffffff813ca94e>] ? ethtool_get_value+0x2e/0x50 [ 87.841188] [<ffffffff813af269>] ? ___sys_sendmsg+0x359/0x370 [ 87.841212] [<ffffffff813da686>] ? dev_ioctl+0x1a6/0x5c0 [ 87.841236] [<ffffffff8109c210>] ? autoremove_wake_function+0x30/0x30 [ 87.841264] [<ffffffff813ac59d>] ? sock_do_ioctl+0x3d/0x50 [ 87.841288] [<ffffffff813aca68>] ? sock_ioctl+0x1e8/0x2c0 [ 87.841312] [<ffffffff811934bf>] ? do_vfs_ioctl+0x2cf/0x4b0 [ 87.841335] [<ffffffff813afeb9>] ? __sys_sendmsg+0x39/0x70 [ 87.841362] [<ffffffff814b86f9>] ? system_call_fastpath+0x16/0x1b [ 87.841386] Code: c0 74 10 48 89 ef ff d0 83 c0 07 83 e0 fc 48 98 49 01 c7 48 89 ef e8 d0 d6 fe ff 48 85 c0 0f 84 df 00 00 00 48 8b 90 08 07 00 00 <48> 8b 8a a8 00 00 00 31 d2 48 85 c9 74 0c 48 89 ee 48 89 c7 ff [ 87.841529] RIP [<ffffffff813d47c0>] if_nlmsg_size+0xf0/0x220 [ 87.841555] RSP <ffff880221aa5950> [ 87.841569] CR2: 00000000000000a8 [ 87.851442] ---[ end trace e42ab217691b4fc2 ]--- Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-04 10:35:02 +00:00
if (!ops || !ops->get_slave_size)
goto out;
/* IFLA_INFO_SLAVE_DATA + nested data */
size = nla_total_size(sizeof(struct nlattr)) +
ops->get_slave_size(master_dev, dev);
out:
rcu_read_unlock();
return size;
}
static size_t rtnl_link_get_size(const struct net_device *dev)
{
const struct rtnl_link_ops *ops = dev->rtnl_link_ops;
size_t size;
if (!ops)
return 0;
size = nla_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
nla_total_size(strlen(ops->kind) + 1); /* IFLA_INFO_KIND */
if (ops->get_size)
/* IFLA_INFO_DATA + nested data */
size += nla_total_size(sizeof(struct nlattr)) +
ops->get_size(dev);
if (ops->get_xstats_size)
/* IFLA_INFO_XSTATS */
size += nla_total_size(ops->get_xstats_size(dev));
size += rtnl_link_get_slave_info_data_size(dev);
return size;
}
static LIST_HEAD(rtnl_af_ops);
static const struct rtnl_af_ops *rtnl_af_lookup(const int family)
{
const struct rtnl_af_ops *ops;
ASSERT_RTNL();
list_for_each_entry(ops, &rtnl_af_ops, list) {
if (ops->family == family)
return ops;
}
return NULL;
}
/**
* rtnl_af_register - Register rtnl_af_ops with rtnetlink.
* @ops: struct rtnl_af_ops * to register
*
* Returns 0 on success or a negative error code.
*/
void rtnl_af_register(struct rtnl_af_ops *ops)
{
rtnl_lock();
list_add_tail_rcu(&ops->list, &rtnl_af_ops);
rtnl_unlock();
}
EXPORT_SYMBOL_GPL(rtnl_af_register);
/**
* rtnl_af_unregister - Unregister rtnl_af_ops from rtnetlink.
* @ops: struct rtnl_af_ops * to unregister
*/
void rtnl_af_unregister(struct rtnl_af_ops *ops)
{
rtnl_lock();
list_del_rcu(&ops->list);
rtnl_unlock();
synchronize_rcu();
}
EXPORT_SYMBOL_GPL(rtnl_af_unregister);
static size_t rtnl_link_get_af_size(const struct net_device *dev,
u32 ext_filter_mask)
{
struct rtnl_af_ops *af_ops;
size_t size;
/* IFLA_AF_SPEC */
size = nla_total_size(sizeof(struct nlattr));
rcu_read_lock();
list_for_each_entry_rcu(af_ops, &rtnl_af_ops, list) {
if (af_ops->get_link_af_size) {
/* AF_* + nested data */
size += nla_total_size(sizeof(struct nlattr)) +
af_ops->get_link_af_size(dev, ext_filter_mask);
}
}
rcu_read_unlock();
return size;
}
static bool rtnl_have_link_slave_info(const struct net_device *dev)
{
struct net_device *master_dev;
bool ret = false;
rcu_read_lock();
master_dev = netdev_master_upper_dev_get_rcu((struct net_device *)dev);
if (master_dev && master_dev->rtnl_link_ops)
ret = true;
rcu_read_unlock();
return ret;
}
static int rtnl_link_slave_info_fill(struct sk_buff *skb,
const struct net_device *dev)
{
struct net_device *master_dev;
const struct rtnl_link_ops *ops;
struct nlattr *slave_data;
int err;
master_dev = netdev_master_upper_dev_get((struct net_device *) dev);
if (!master_dev)
return 0;
ops = master_dev->rtnl_link_ops;
if (!ops)
return 0;
if (nla_put_string(skb, IFLA_INFO_SLAVE_KIND, ops->kind) < 0)
return -EMSGSIZE;
if (ops->fill_slave_info) {
slave_data = nla_nest_start_noflag(skb, IFLA_INFO_SLAVE_DATA);
if (!slave_data)
return -EMSGSIZE;
err = ops->fill_slave_info(skb, master_dev, dev);
if (err < 0)
goto err_cancel_slave_data;
nla_nest_end(skb, slave_data);
}
return 0;
err_cancel_slave_data:
nla_nest_cancel(skb, slave_data);
return err;
}
static int rtnl_link_info_fill(struct sk_buff *skb,
const struct net_device *dev)
{
const struct rtnl_link_ops *ops = dev->rtnl_link_ops;
struct nlattr *data;
int err;
if (!ops)
return 0;
if (nla_put_string(skb, IFLA_INFO_KIND, ops->kind) < 0)
return -EMSGSIZE;
if (ops->fill_xstats) {
err = ops->fill_xstats(skb, dev);
if (err < 0)
return err;
}
if (ops->fill_info) {
data = nla_nest_start_noflag(skb, IFLA_INFO_DATA);
if (data == NULL)
return -EMSGSIZE;
err = ops->fill_info(skb, dev);
if (err < 0)
goto err_cancel_data;
nla_nest_end(skb, data);
}
return 0;
err_cancel_data:
nla_nest_cancel(skb, data);
return err;
}
static int rtnl_link_fill(struct sk_buff *skb, const struct net_device *dev)
{
struct nlattr *linkinfo;
int err = -EMSGSIZE;
linkinfo = nla_nest_start_noflag(skb, IFLA_LINKINFO);
if (linkinfo == NULL)
goto out;
err = rtnl_link_info_fill(skb, dev);
if (err < 0)
goto err_cancel_link;
err = rtnl_link_slave_info_fill(skb, dev);
if (err < 0)
goto err_cancel_link;
nla_nest_end(skb, linkinfo);
return 0;
err_cancel_link:
nla_nest_cancel(skb, linkinfo);
out:
return err;
}
int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, unsigned int group, int echo)
{
struct sock *rtnl = net->rtnl;
return nlmsg_notify(rtnl, skb, pid, group, echo, GFP_KERNEL);
}
int rtnl_unicast(struct sk_buff *skb, struct net *net, u32 pid)
{
struct sock *rtnl = net->rtnl;
return nlmsg_unicast(rtnl, skb, pid);
}
EXPORT_SYMBOL(rtnl_unicast);
2009-02-25 07:18:28 +00:00
void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, u32 group,
const struct nlmsghdr *nlh, gfp_t flags)
{
struct sock *rtnl = net->rtnl;
nlmsg_notify(rtnl, skb, pid, group, nlmsg_report(nlh), flags);
}
EXPORT_SYMBOL(rtnl_notify);
void rtnl_set_sk_err(struct net *net, u32 group, int error)
{
struct sock *rtnl = net->rtnl;
netlink_set_err(rtnl, 0, group, error);
}
EXPORT_SYMBOL(rtnl_set_sk_err);
int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics)
{
struct nlattr *mx;
int i, valid = 0;
/* nothing is dumped for dst_default_metrics, so just skip the loop */
if (metrics == dst_default_metrics.metrics)
return 0;
mx = nla_nest_start_noflag(skb, RTA_METRICS);
if (mx == NULL)
return -ENOBUFS;
for (i = 0; i < RTAX_MAX; i++) {
if (metrics[i]) {
if (i == RTAX_CC_ALGO - 1) {
char tmp[TCP_CA_NAME_MAX], *name;
name = tcp_ca_get_name_by_key(metrics[i], tmp);
if (!name)
continue;
if (nla_put_string(skb, i + 1, name))
goto nla_put_failure;
} else if (i == RTAX_FEATURES - 1) {
u32 user_features = metrics[i] & RTAX_FEATURE_MASK;
if (!user_features)
continue;
BUILD_BUG_ON(RTAX_FEATURE_MASK & DST_FEATURE_MASK);
if (nla_put_u32(skb, i + 1, user_features))
goto nla_put_failure;
} else {
if (nla_put_u32(skb, i + 1, metrics[i]))
goto nla_put_failure;
}
valid++;
}
}
if (!valid) {
nla_nest_cancel(skb, mx);
return 0;
}
return nla_nest_end(skb, mx);
nla_put_failure:
nla_nest_cancel(skb, mx);
return -EMSGSIZE;
}
EXPORT_SYMBOL(rtnetlink_put_metrics);
int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id,
long expires, u32 error)
{
struct rta_cacheinfo ci = {
.rta_error = error,
.rta_id = id,
};
if (dst) {
ci.rta_lastuse = jiffies_delta_to_clock_t(jiffies - dst->lastuse);
ci.rta_used = dst->__use;
ci.rta_clntref = rcuref_read(&dst->__rcuref);
}
if (expires) {
unsigned long clock;
clock = jiffies_to_clock_t(abs(expires));
clock = min_t(unsigned long, clock, INT_MAX);
ci.rta_expires = (expires > 0) ? clock : -clock;
}
return nla_put(skb, RTA_CACHEINFO, sizeof(ci), &ci);
}
EXPORT_SYMBOL_GPL(rtnl_put_cacheinfo);
static void set_operstate(struct net_device *dev, unsigned char transition)
{
unsigned char operstate = dev->operstate;
switch (transition) {
case IF_OPER_UP:
if ((operstate == IF_OPER_DORMANT ||
operstate == IF_OPER_TESTING ||
operstate == IF_OPER_UNKNOWN) &&
!netif_dormant(dev) && !netif_testing(dev))
operstate = IF_OPER_UP;
break;
case IF_OPER_TESTING:
if (netif_oper_up(dev))
operstate = IF_OPER_TESTING;
break;
case IF_OPER_DORMANT:
if (netif_oper_up(dev))
operstate = IF_OPER_DORMANT;
break;
}
if (dev->operstate != operstate) {
write_lock(&dev_base_lock);
dev->operstate = operstate;
write_unlock(&dev_base_lock);
netdev_state_change(dev);
}
}
static unsigned int rtnl_dev_get_flags(const struct net_device *dev)
{
return (dev->flags & ~(IFF_PROMISC | IFF_ALLMULTI)) |
(dev->gflags & (IFF_PROMISC | IFF_ALLMULTI));
}
rtnetlink: support specifying device flags on device creation commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 06:34:54 +00:00
static unsigned int rtnl_dev_combine_flags(const struct net_device *dev,
const struct ifinfomsg *ifm)
{
unsigned int flags = ifm->ifi_flags;
/* bugwards compatibility: ifi_change == 0 is treated as ~0 */
if (ifm->ifi_change)
flags = (flags & ifm->ifi_change) |
(rtnl_dev_get_flags(dev) & ~ifm->ifi_change);
rtnetlink: support specifying device flags on device creation commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 06:34:54 +00:00
return flags;
}
static void copy_rtnl_link_stats(struct rtnl_link_stats *a,
const struct rtnl_link_stats64 *b)
{
a->rx_packets = b->rx_packets;
a->tx_packets = b->tx_packets;
a->rx_bytes = b->rx_bytes;
a->tx_bytes = b->tx_bytes;
a->rx_errors = b->rx_errors;
a->tx_errors = b->tx_errors;
a->rx_dropped = b->rx_dropped;
a->tx_dropped = b->tx_dropped;
a->multicast = b->multicast;
a->collisions = b->collisions;
a->rx_length_errors = b->rx_length_errors;
a->rx_over_errors = b->rx_over_errors;
a->rx_crc_errors = b->rx_crc_errors;
a->rx_frame_errors = b->rx_frame_errors;
a->rx_fifo_errors = b->rx_fifo_errors;
a->rx_missed_errors = b->rx_missed_errors;
a->tx_aborted_errors = b->tx_aborted_errors;
a->tx_carrier_errors = b->tx_carrier_errors;
a->tx_fifo_errors = b->tx_fifo_errors;
a->tx_heartbeat_errors = b->tx_heartbeat_errors;
a->tx_window_errors = b->tx_window_errors;
a->rx_compressed = b->rx_compressed;
a->tx_compressed = b->tx_compressed;
a->rx_nohandler = b->rx_nohandler;
}
/* All VF info */
static inline int rtnl_vfinfo_size(const struct net_device *dev,
u32 ext_filter_mask)
{
if (dev->dev.parent && (ext_filter_mask & RTEXT_FILTER_VF)) {
int num_vfs = dev_num_vf(dev->dev.parent);
size_t size = nla_total_size(0);
size += num_vfs *
(nla_total_size(0) +
nla_total_size(sizeof(struct ifla_vf_mac)) +
nla_total_size(sizeof(struct ifla_vf_broadcast)) +
nla_total_size(sizeof(struct ifla_vf_vlan)) +
nla_total_size(0) + /* nest IFLA_VF_VLAN_LIST */
nla_total_size(MAX_VLAN_LIST_LEN *
sizeof(struct ifla_vf_vlan_info)) +
net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool. o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22 13:59:05 +00:00
nla_total_size(sizeof(struct ifla_vf_spoofchk)) +
nla_total_size(sizeof(struct ifla_vf_tx_rate)) +
nla_total_size(sizeof(struct ifla_vf_rate)) +
nla_total_size(sizeof(struct ifla_vf_link_state)) +
nla_total_size(sizeof(struct ifla_vf_rss_query_en)) +
nla_total_size(sizeof(struct ifla_vf_trust)));
if (~ext_filter_mask & RTEXT_FILTER_SKIP_STATS) {
size += num_vfs *
(nla_total_size(0) + /* nest IFLA_VF_STATS */
/* IFLA_VF_STATS_RX_PACKETS */
nla_total_size_64bit(sizeof(__u64)) +
/* IFLA_VF_STATS_TX_PACKETS */
nla_total_size_64bit(sizeof(__u64)) +
/* IFLA_VF_STATS_RX_BYTES */
nla_total_size_64bit(sizeof(__u64)) +
/* IFLA_VF_STATS_TX_BYTES */
nla_total_size_64bit(sizeof(__u64)) +
/* IFLA_VF_STATS_BROADCAST */
nla_total_size_64bit(sizeof(__u64)) +
/* IFLA_VF_STATS_MULTICAST */
nla_total_size_64bit(sizeof(__u64)) +
/* IFLA_VF_STATS_RX_DROPPED */
nla_total_size_64bit(sizeof(__u64)) +
/* IFLA_VF_STATS_TX_DROPPED */
nla_total_size_64bit(sizeof(__u64)));
}
return size;
} else
return 0;
}
rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 00:22:36 +00:00
static size_t rtnl_port_size(const struct net_device *dev,
u32 ext_filter_mask)
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
{
size_t port_size = nla_total_size(4) /* PORT_VF */
+ nla_total_size(PORT_PROFILE_MAX) /* PORT_PROFILE */
+ nla_total_size(PORT_UUID_MAX) /* PORT_INSTANCE_UUID */
+ nla_total_size(PORT_UUID_MAX) /* PORT_HOST_UUID */
+ nla_total_size(1) /* PROT_VDP_REQUEST */
+ nla_total_size(2); /* PORT_VDP_RESPONSE */
size_t vf_ports_size = nla_total_size(sizeof(struct nlattr));
size_t vf_port_size = nla_total_size(sizeof(struct nlattr))
+ port_size;
size_t port_self_size = nla_total_size(sizeof(struct nlattr))
+ port_size;
rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 00:22:36 +00:00
if (!dev->netdev_ops->ndo_get_vf_port || !dev->dev.parent ||
!(ext_filter_mask & RTEXT_FILTER_VF))
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
return 0;
if (dev_num_vf(dev->dev.parent))
return port_self_size + vf_ports_size +
vf_port_size * dev_num_vf(dev->dev.parent);
else
return port_self_size;
}
net: Generic XDP This provides a generic SKB based non-optimized XDP path which is used if either the driver lacks a specific XDP implementation, or the user requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE. It is arguable that perhaps I should have required something like this as part of the initial XDP feature merge. I believe this is critical for two reasons: 1) Accessibility. More people can play with XDP with less dependencies. Yes I know we have XDP support in virtio_net, but that just creates another depedency for learning how to use this facility. I wrote this to make life easier for the XDP newbies. 2) As a model for what the expected semantics are. If there is a pure generic core implementation, it serves as a semantic example for driver folks adding XDP support. One thing I have not tried to address here is the issue of XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or whatever even if the XDP program doesn't try to push headers at all. I think we really need the verifier to somehow propagate whether certain XDP helpers are used or not. v5: - Handle both negative and positive offset after running prog - Fix mac length in XDP_TX case (Alexei) - Use rcu_dereference_protected() in free_netdev (kbuild test robot) v4: - Fix MAC header adjustmnet before calling prog (David Ahern) - Disable LRO when generic XDP is installed (Michael Chan) - Bypass qdisc et al. on XDP_TX and record the event (Alexei) - Do not perform generic XDP on reinjected packets (DaveM) v3: - Make sure XDP program sees packet at MAC header, push back MAC header if we do XDP_TX. (Alexei) - Elide GRO when generic XDP is in use. (Alexei) - Add XDP_FLAG_SKB_MODE flag which the user can use to request generic XDP even if the driver has an XDP implementation. (Alexei) - Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS attribute. (Daniel) v2: - Add some "fall through" comments in switch statements based upon feedback from Andrew Lunn - Use RCU for generic xdp_prog, thanks to Johannes Berg. Tested-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 19:36:58 +00:00
static size_t rtnl_xdp_size(void)
{
size_t xdp_size = nla_total_size(0) + /* nest IFLA_XDP */
nla_total_size(1) + /* XDP_ATTACHED */
nla_total_size(4) + /* XDP_PROG_ID (or 1st mode) */
nla_total_size(4); /* XDP_<mode>_PROG_ID */
net: Generic XDP This provides a generic SKB based non-optimized XDP path which is used if either the driver lacks a specific XDP implementation, or the user requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE. It is arguable that perhaps I should have required something like this as part of the initial XDP feature merge. I believe this is critical for two reasons: 1) Accessibility. More people can play with XDP with less dependencies. Yes I know we have XDP support in virtio_net, but that just creates another depedency for learning how to use this facility. I wrote this to make life easier for the XDP newbies. 2) As a model for what the expected semantics are. If there is a pure generic core implementation, it serves as a semantic example for driver folks adding XDP support. One thing I have not tried to address here is the issue of XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or whatever even if the XDP program doesn't try to push headers at all. I think we really need the verifier to somehow propagate whether certain XDP helpers are used or not. v5: - Handle both negative and positive offset after running prog - Fix mac length in XDP_TX case (Alexei) - Use rcu_dereference_protected() in free_netdev (kbuild test robot) v4: - Fix MAC header adjustmnet before calling prog (David Ahern) - Disable LRO when generic XDP is installed (Michael Chan) - Bypass qdisc et al. on XDP_TX and record the event (Alexei) - Do not perform generic XDP on reinjected packets (DaveM) v3: - Make sure XDP program sees packet at MAC header, push back MAC header if we do XDP_TX. (Alexei) - Elide GRO when generic XDP is in use. (Alexei) - Add XDP_FLAG_SKB_MODE flag which the user can use to request generic XDP even if the driver has an XDP implementation. (Alexei) - Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS attribute. (Daniel) v2: - Add some "fall through" comments in switch statements based upon feedback from Andrew Lunn - Use RCU for generic xdp_prog, thanks to Johannes Berg. Tested-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 19:36:58 +00:00
return xdp_size;
}
static size_t rtnl_prop_list_size(const struct net_device *dev)
{
struct netdev_name_node *name_node;
size_t size;
if (list_empty(&dev->name_node->list))
return 0;
size = nla_total_size(0);
list_for_each_entry(name_node, &dev->name_node->list, list)
size += nla_total_size(ALTIFNAMSIZ);
return size;
}
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
static size_t rtnl_proto_down_size(const struct net_device *dev)
{
size_t size = nla_total_size(1);
if (dev->proto_down_reason)
size += nla_total_size(0) + nla_total_size(4);
return size;
}
static size_t rtnl_devlink_port_size(const struct net_device *dev)
{
size_t size = nla_total_size(0); /* nest IFLA_DEVLINK_PORT */
if (dev->devlink_port)
size += devlink_nl_port_handle_size(dev->devlink_port);
return size;
}
static noinline size_t if_nlmsg_size(const struct net_device *dev,
u32 ext_filter_mask)
{
return NLMSG_ALIGN(sizeof(struct ifinfomsg))
+ nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
+ nla_total_size(IFALIASZ) /* IFLA_IFALIAS */
+ nla_total_size(IFNAMSIZ) /* IFLA_QDISC */
+ nla_total_size_64bit(sizeof(struct rtnl_link_ifmap))
+ nla_total_size(sizeof(struct rtnl_link_stats))
+ nla_total_size_64bit(sizeof(struct rtnl_link_stats64))
+ nla_total_size(MAX_ADDR_LEN) /* IFLA_ADDRESS */
+ nla_total_size(MAX_ADDR_LEN) /* IFLA_BROADCAST */
+ nla_total_size(4) /* IFLA_TXQLEN */
+ nla_total_size(4) /* IFLA_WEIGHT */
+ nla_total_size(4) /* IFLA_MTU */
+ nla_total_size(4) /* IFLA_LINK */
+ nla_total_size(4) /* IFLA_MASTER */
+ nla_total_size(1) /* IFLA_CARRIER */
+ nla_total_size(4) /* IFLA_PROMISCUITY */
+ nla_total_size(4) /* IFLA_ALLMULTI */
+ nla_total_size(4) /* IFLA_NUM_TX_QUEUES */
+ nla_total_size(4) /* IFLA_NUM_RX_QUEUES */
+ nla_total_size(4) /* IFLA_GSO_MAX_SEGS */
+ nla_total_size(4) /* IFLA_GSO_MAX_SIZE */
+ nla_total_size(4) /* IFLA_GRO_MAX_SIZE */
+ nla_total_size(4) /* IFLA_GSO_IPV4_MAX_SIZE */
+ nla_total_size(4) /* IFLA_GRO_IPV4_MAX_SIZE */
+ nla_total_size(4) /* IFLA_TSO_MAX_SIZE */
+ nla_total_size(4) /* IFLA_TSO_MAX_SEGS */
+ nla_total_size(1) /* IFLA_OPERSTATE */
+ nla_total_size(1) /* IFLA_LINKMODE */
+ nla_total_size(4) /* IFLA_CARRIER_CHANGES */
+ nla_total_size(4) /* IFLA_LINK_NETNSID */
+ nla_total_size(4) /* IFLA_GROUP */
+ nla_total_size(ext_filter_mask
& RTEXT_FILTER_VF ? 4 : 0) /* IFLA_NUM_VF */
+ rtnl_vfinfo_size(dev, ext_filter_mask) /* IFLA_VFINFO_LIST */
rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 00:22:36 +00:00
+ rtnl_port_size(dev, ext_filter_mask) /* IFLA_VF_PORTS + IFLA_PORT_SELF */
+ rtnl_link_get_size(dev) /* IFLA_LINKINFO */
+ rtnl_link_get_af_size(dev, ext_filter_mask) /* IFLA_AF_SPEC */
+ nla_total_size(MAX_PHYS_ITEM_ID_LEN) /* IFLA_PHYS_PORT_ID */
+ nla_total_size(MAX_PHYS_ITEM_ID_LEN) /* IFLA_PHYS_SWITCH_ID */
+ nla_total_size(IFNAMSIZ) /* IFLA_PHYS_PORT_NAME */
net: Generic XDP This provides a generic SKB based non-optimized XDP path which is used if either the driver lacks a specific XDP implementation, or the user requests it via a new IFLA_XDP_FLAGS value named XDP_FLAGS_SKB_MODE. It is arguable that perhaps I should have required something like this as part of the initial XDP feature merge. I believe this is critical for two reasons: 1) Accessibility. More people can play with XDP with less dependencies. Yes I know we have XDP support in virtio_net, but that just creates another depedency for learning how to use this facility. I wrote this to make life easier for the XDP newbies. 2) As a model for what the expected semantics are. If there is a pure generic core implementation, it serves as a semantic example for driver folks adding XDP support. One thing I have not tried to address here is the issue of XDP_PACKET_HEADROOM, thanks to Daniel for spotting that. It seems incredibly expensive to do a skb_cow(skb, XDP_PACKET_HEADROOM) or whatever even if the XDP program doesn't try to push headers at all. I think we really need the verifier to somehow propagate whether certain XDP helpers are used or not. v5: - Handle both negative and positive offset after running prog - Fix mac length in XDP_TX case (Alexei) - Use rcu_dereference_protected() in free_netdev (kbuild test robot) v4: - Fix MAC header adjustmnet before calling prog (David Ahern) - Disable LRO when generic XDP is installed (Michael Chan) - Bypass qdisc et al. on XDP_TX and record the event (Alexei) - Do not perform generic XDP on reinjected packets (DaveM) v3: - Make sure XDP program sees packet at MAC header, push back MAC header if we do XDP_TX. (Alexei) - Elide GRO when generic XDP is in use. (Alexei) - Add XDP_FLAG_SKB_MODE flag which the user can use to request generic XDP even if the driver has an XDP implementation. (Alexei) - Report whether SKB mode is in use in rtnl_xdp_fill() via XDP_FLAGS attribute. (Daniel) v2: - Add some "fall through" comments in switch statements based upon feedback from Andrew Lunn - Use RCU for generic xdp_prog, thanks to Johannes Berg. Tested-by: Andy Gospodarek <andy@greyhouse.net> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 19:36:58 +00:00
+ rtnl_xdp_size() /* IFLA_XDP */
+ nla_total_size(4) /* IFLA_EVENT */
+ nla_total_size(4) /* IFLA_NEW_NETNSID */
+ nla_total_size(4) /* IFLA_NEW_IFINDEX */
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
+ rtnl_proto_down_size(dev) /* proto down */
+ nla_total_size(4) /* IFLA_TARGET_NETNSID */
+ nla_total_size(4) /* IFLA_CARRIER_UP_COUNT */
+ nla_total_size(4) /* IFLA_CARRIER_DOWN_COUNT */
+ nla_total_size(4) /* IFLA_MIN_MTU */
+ nla_total_size(4) /* IFLA_MAX_MTU */
+ rtnl_prop_list_size(dev)
+ nla_total_size(MAX_ADDR_LEN) /* IFLA_PERM_ADDRESS */
+ rtnl_devlink_port_size(dev)
+ 0;
}
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
static int rtnl_vf_ports_fill(struct sk_buff *skb, struct net_device *dev)
{
struct nlattr *vf_ports;
struct nlattr *vf_port;
int vf;
int err;
vf_ports = nla_nest_start_noflag(skb, IFLA_VF_PORTS);
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
if (!vf_ports)
return -EMSGSIZE;
for (vf = 0; vf < dev_num_vf(dev->dev.parent); vf++) {
vf_port = nla_nest_start_noflag(skb, IFLA_VF_PORT);
if (!vf_port)
goto nla_put_failure;
if (nla_put_u32(skb, IFLA_PORT_VF, vf))
goto nla_put_failure;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
err = dev->netdev_ops->ndo_get_vf_port(dev, vf, skb);
if (err == -EMSGSIZE)
goto nla_put_failure;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
if (err) {
nla_nest_cancel(skb, vf_port);
continue;
}
nla_nest_end(skb, vf_port);
}
nla_nest_end(skb, vf_ports);
return 0;
nla_put_failure:
nla_nest_cancel(skb, vf_ports);
return -EMSGSIZE;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
}
static int rtnl_port_self_fill(struct sk_buff *skb, struct net_device *dev)
{
struct nlattr *port_self;
int err;
port_self = nla_nest_start_noflag(skb, IFLA_PORT_SELF);
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
if (!port_self)
return -EMSGSIZE;
err = dev->netdev_ops->ndo_get_vf_port(dev, PORT_SELF_VF, skb);
if (err) {
nla_nest_cancel(skb, port_self);
return (err == -EMSGSIZE) ? err : 0;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
}
nla_nest_end(skb, port_self);
return 0;
}
rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 00:22:36 +00:00
static int rtnl_port_fill(struct sk_buff *skb, struct net_device *dev,
u32 ext_filter_mask)
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
{
int err;
rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 00:22:36 +00:00
if (!dev->netdev_ops->ndo_get_vf_port || !dev->dev.parent ||
!(ext_filter_mask & RTEXT_FILTER_VF))
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
return 0;
err = rtnl_port_self_fill(skb, dev);
if (err)
return err;
if (dev_num_vf(dev->dev.parent)) {
err = rtnl_vf_ports_fill(skb, dev);
if (err)
return err;
}
return 0;
}
static int rtnl_phys_port_id_fill(struct sk_buff *skb, struct net_device *dev)
{
int err;
struct netdev_phys_item_id ppid;
err = dev_get_phys_port_id(dev, &ppid);
if (err) {
if (err == -EOPNOTSUPP)
return 0;
return err;
}
if (nla_put(skb, IFLA_PHYS_PORT_ID, ppid.id_len, ppid.id))
return -EMSGSIZE;
return 0;
}
static int rtnl_phys_port_name_fill(struct sk_buff *skb, struct net_device *dev)
{
char name[IFNAMSIZ];
int err;
err = dev_get_phys_port_name(dev, name, sizeof(name));
if (err) {
if (err == -EOPNOTSUPP)
return 0;
return err;
}
if (nla_put_string(skb, IFLA_PHYS_PORT_NAME, name))
return -EMSGSIZE;
return 0;
}
static int rtnl_phys_switch_id_fill(struct sk_buff *skb, struct net_device *dev)
{
struct netdev_phys_item_id ppid = { };
int err;
err = dev_get_port_parent_id(dev, &ppid, false);
if (err) {
if (err == -EOPNOTSUPP)
return 0;
return err;
}
if (nla_put(skb, IFLA_PHYS_SWITCH_ID, ppid.id_len, ppid.id))
return -EMSGSIZE;
return 0;
}
static noinline_for_stack int rtnl_fill_stats(struct sk_buff *skb,
struct net_device *dev)
{
struct rtnl_link_stats64 *sp;
struct nlattr *attr;
attr = nla_reserve_64bit(skb, IFLA_STATS64,
sizeof(struct rtnl_link_stats64), IFLA_PAD);
if (!attr)
return -EMSGSIZE;
sp = nla_data(attr);
dev_get_stats(dev, sp);
attr = nla_reserve(skb, IFLA_STATS,
sizeof(struct rtnl_link_stats));
if (!attr)
return -EMSGSIZE;
copy_rtnl_link_stats(nla_data(attr), sp);
return 0;
}
static noinline_for_stack int rtnl_fill_vfinfo(struct sk_buff *skb,
struct net_device *dev,
int vfs_num,
u32 ext_filter_mask)
{
struct ifla_vf_rss_query_en vf_rss_query_en;
struct nlattr *vf, *vfstats, *vfvlanlist;
struct ifla_vf_link_state vf_linkstate;
struct ifla_vf_vlan_info vf_vlan_info;
struct ifla_vf_spoofchk vf_spoofchk;
struct ifla_vf_tx_rate vf_tx_rate;
struct ifla_vf_stats vf_stats;
struct ifla_vf_trust vf_trust;
struct ifla_vf_vlan vf_vlan;
struct ifla_vf_rate vf_rate;
struct ifla_vf_mac vf_mac;
struct ifla_vf_broadcast vf_broadcast;
struct ifla_vf_info ivi;
struct ifla_vf_guid node_guid;
struct ifla_vf_guid port_guid;
memset(&ivi, 0, sizeof(ivi));
/* Not all SR-IOV capable drivers support the
* spoofcheck and "RSS query enable" query. Preset to
* -1 so the user space tool can detect that the driver
* didn't report anything.
*/
ivi.spoofchk = -1;
ivi.rss_query_en = -1;
ivi.trusted = -1;
/* The default value for VF link state is "auto"
* IFLA_VF_LINK_STATE_AUTO which equals zero
*/
ivi.linkstate = 0;
/* VLAN Protocol by default is 802.1Q */
ivi.vlan_proto = htons(ETH_P_8021Q);
if (dev->netdev_ops->ndo_get_vf_config(dev, vfs_num, &ivi))
return 0;
memset(&vf_vlan_info, 0, sizeof(vf_vlan_info));
memset(&node_guid, 0, sizeof(node_guid));
memset(&port_guid, 0, sizeof(port_guid));
vf_mac.vf =
vf_vlan.vf =
vf_vlan_info.vf =
vf_rate.vf =
vf_tx_rate.vf =
vf_spoofchk.vf =
vf_linkstate.vf =
vf_rss_query_en.vf =
vf_trust.vf =
node_guid.vf =
port_guid.vf = ivi.vf;
memcpy(vf_mac.mac, ivi.mac, sizeof(ivi.mac));
memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);
vf_vlan.vlan = ivi.vlan;
vf_vlan.qos = ivi.qos;
vf_vlan_info.vlan = ivi.vlan;
vf_vlan_info.qos = ivi.qos;
vf_vlan_info.vlan_proto = ivi.vlan_proto;
vf_tx_rate.rate = ivi.max_tx_rate;
vf_rate.min_tx_rate = ivi.min_tx_rate;
vf_rate.max_tx_rate = ivi.max_tx_rate;
vf_spoofchk.setting = ivi.spoofchk;
vf_linkstate.link_state = ivi.linkstate;
vf_rss_query_en.setting = ivi.rss_query_en;
vf_trust.setting = ivi.trusted;
vf = nla_nest_start_noflag(skb, IFLA_VF_INFO);
if (!vf)
return -EMSGSIZE;
if (nla_put(skb, IFLA_VF_MAC, sizeof(vf_mac), &vf_mac) ||
nla_put(skb, IFLA_VF_BROADCAST, sizeof(vf_broadcast), &vf_broadcast) ||
nla_put(skb, IFLA_VF_VLAN, sizeof(vf_vlan), &vf_vlan) ||
nla_put(skb, IFLA_VF_RATE, sizeof(vf_rate),
&vf_rate) ||
nla_put(skb, IFLA_VF_TX_RATE, sizeof(vf_tx_rate),
&vf_tx_rate) ||
nla_put(skb, IFLA_VF_SPOOFCHK, sizeof(vf_spoofchk),
&vf_spoofchk) ||
nla_put(skb, IFLA_VF_LINK_STATE, sizeof(vf_linkstate),
&vf_linkstate) ||
nla_put(skb, IFLA_VF_RSS_QUERY_EN,
sizeof(vf_rss_query_en),
&vf_rss_query_en) ||
nla_put(skb, IFLA_VF_TRUST,
sizeof(vf_trust), &vf_trust))
goto nla_put_vf_failure;
if (dev->netdev_ops->ndo_get_vf_guid &&
!dev->netdev_ops->ndo_get_vf_guid(dev, vfs_num, &node_guid,
&port_guid)) {
if (nla_put(skb, IFLA_VF_IB_NODE_GUID, sizeof(node_guid),
&node_guid) ||
nla_put(skb, IFLA_VF_IB_PORT_GUID, sizeof(port_guid),
&port_guid))
goto nla_put_vf_failure;
}
vfvlanlist = nla_nest_start_noflag(skb, IFLA_VF_VLAN_LIST);
if (!vfvlanlist)
goto nla_put_vf_failure;
if (nla_put(skb, IFLA_VF_VLAN_INFO, sizeof(vf_vlan_info),
&vf_vlan_info)) {
nla_nest_cancel(skb, vfvlanlist);
goto nla_put_vf_failure;
}
nla_nest_end(skb, vfvlanlist);
if (~ext_filter_mask & RTEXT_FILTER_SKIP_STATS) {
memset(&vf_stats, 0, sizeof(vf_stats));
if (dev->netdev_ops->ndo_get_vf_stats)
dev->netdev_ops->ndo_get_vf_stats(dev, vfs_num,
&vf_stats);
vfstats = nla_nest_start_noflag(skb, IFLA_VF_STATS);
if (!vfstats)
goto nla_put_vf_failure;
if (nla_put_u64_64bit(skb, IFLA_VF_STATS_RX_PACKETS,
vf_stats.rx_packets, IFLA_VF_STATS_PAD) ||
nla_put_u64_64bit(skb, IFLA_VF_STATS_TX_PACKETS,
vf_stats.tx_packets, IFLA_VF_STATS_PAD) ||
nla_put_u64_64bit(skb, IFLA_VF_STATS_RX_BYTES,
vf_stats.rx_bytes, IFLA_VF_STATS_PAD) ||
nla_put_u64_64bit(skb, IFLA_VF_STATS_TX_BYTES,
vf_stats.tx_bytes, IFLA_VF_STATS_PAD) ||
nla_put_u64_64bit(skb, IFLA_VF_STATS_BROADCAST,
vf_stats.broadcast, IFLA_VF_STATS_PAD) ||
nla_put_u64_64bit(skb, IFLA_VF_STATS_MULTICAST,
vf_stats.multicast, IFLA_VF_STATS_PAD) ||
nla_put_u64_64bit(skb, IFLA_VF_STATS_RX_DROPPED,
vf_stats.rx_dropped, IFLA_VF_STATS_PAD) ||
nla_put_u64_64bit(skb, IFLA_VF_STATS_TX_DROPPED,
vf_stats.tx_dropped, IFLA_VF_STATS_PAD)) {
nla_nest_cancel(skb, vfstats);
goto nla_put_vf_failure;
}
nla_nest_end(skb, vfstats);
}
nla_nest_end(skb, vf);
return 0;
nla_put_vf_failure:
nla_nest_cancel(skb, vf);
return -EMSGSIZE;
}
static noinline_for_stack int rtnl_fill_vf(struct sk_buff *skb,
struct net_device *dev,
u32 ext_filter_mask)
{
struct nlattr *vfinfo;
int i, num_vfs;
if (!dev->dev.parent || ((ext_filter_mask & RTEXT_FILTER_VF) == 0))
return 0;
num_vfs = dev_num_vf(dev->dev.parent);
if (nla_put_u32(skb, IFLA_NUM_VF, num_vfs))
return -EMSGSIZE;
if (!dev->netdev_ops->ndo_get_vf_config)
return 0;
vfinfo = nla_nest_start_noflag(skb, IFLA_VFINFO_LIST);
if (!vfinfo)
return -EMSGSIZE;
for (i = 0; i < num_vfs; i++) {
if (rtnl_fill_vfinfo(skb, dev, i, ext_filter_mask)) {
nla_nest_cancel(skb, vfinfo);
return -EMSGSIZE;
}
}
nla_nest_end(skb, vfinfo);
return 0;
}
static int rtnl_fill_link_ifmap(struct sk_buff *skb, struct net_device *dev)
{
struct rtnl_link_ifmap map;
memset(&map, 0, sizeof(map));
map.mem_start = dev->mem_start;
map.mem_end = dev->mem_end;
map.base_addr = dev->base_addr;
map.irq = dev->irq;
map.dma = dev->dma;
map.port = dev->if_port;
if (nla_put_64bit(skb, IFLA_MAP, sizeof(map), &map, IFLA_PAD))
return -EMSGSIZE;
return 0;
}
static u32 rtnl_xdp_prog_skb(struct net_device *dev)
xdp: refine xdp api with regards to generic xdp While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae3291f7 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291f7 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11 23:04:46 +00:00
{
const struct bpf_prog *generic_xdp_prog;
xdp: refine xdp api with regards to generic xdp While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae3291f7 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291f7 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11 23:04:46 +00:00
ASSERT_RTNL();
generic_xdp_prog = rtnl_dereference(dev->xdp_prog);
if (!generic_xdp_prog)
return 0;
return generic_xdp_prog->aux->id;
}
xdp: refine xdp api with regards to generic xdp While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae3291f7 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291f7 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11 23:04:46 +00:00
static u32 rtnl_xdp_prog_drv(struct net_device *dev)
{
return dev_xdp_prog_id(dev, XDP_MODE_DRV);
}
static u32 rtnl_xdp_prog_hw(struct net_device *dev)
{
return dev_xdp_prog_id(dev, XDP_MODE_HW);
}
static int rtnl_xdp_report_one(struct sk_buff *skb, struct net_device *dev,
u32 *prog_id, u8 *mode, u8 tgt_mode, u32 attr,
u32 (*get_prog_id)(struct net_device *dev))
{
u32 curr_id;
int err;
curr_id = get_prog_id(dev);
if (!curr_id)
return 0;
*prog_id = curr_id;
err = nla_put_u32(skb, attr, curr_id);
if (err)
return err;
xdp: refine xdp api with regards to generic xdp While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae3291f7 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291f7 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11 23:04:46 +00:00
if (*mode != XDP_ATTACHED_NONE)
*mode = XDP_ATTACHED_MULTI;
else
*mode = tgt_mode;
return 0;
xdp: refine xdp api with regards to generic xdp While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae3291f7 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291f7 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11 23:04:46 +00:00
}
static int rtnl_xdp_fill(struct sk_buff *skb, struct net_device *dev)
{
struct nlattr *xdp;
u32 prog_id;
int err;
u8 mode;
xdp = nla_nest_start_noflag(skb, IFLA_XDP);
if (!xdp)
return -EMSGSIZE;
xdp: refine xdp api with regards to generic xdp While working on the iproute2 generic XDP frontend, I noticed that as of right now it's possible to have native *and* generic XDP programs loaded both at the same time for the case when a driver supports native XDP. The intended model for generic XDP from b5cdae3291f7 ("net: Generic XDP") is, however, that only one out of the two can be present at once which is also indicated as such in the XDP netlink dump part. The main rationale for generic XDP is to ease accessibility (in case a driver does not yet have XDP support) and to generically provide a semantical model as an example for driver developers wanting to add XDP support. The generic XDP option for an XDP aware driver can still be useful for comparing and testing both implementations. However, it is not intended to have a second XDP processing stage or layer with exactly the same functionality of the first native stage. Only reason could be to have a partial fallback for future XDP features that are not supported yet in the native implementation and we probably also shouldn't strive for such fallback and instead encourage native feature support in the first place. Given there's currently no such fallback issue or use case, lets not go there yet if we don't need to. Therefore, change semantics for loading XDP and bail out if the user tries to load a generic XDP program when a native one is present and vice versa. Another alternative to bailing out would be to handle the transition from one flavor to another gracefully, but that would require to bring the device down, exchange both types of programs, and bring it up again in order to avoid a tiny window where a packet could hit both hooks. Given this complicates the logic for just a debugging feature in the native case, I went with the simpler variant. For the dump, remove IFLA_XDP_FLAGS that was added with b5cdae3291f7 and reuse IFLA_XDP_ATTACHED for indicating the mode. Dumping all or just a subset of flags that were used for loading the XDP prog is suboptimal in the long run since not all flags are useful for dumping and if we start to reuse the same flag definitions for load and dump, then we'll waste bit space. What we really just want is to dump the mode for now. Current IFLA_XDP_ATTACHED semantics are: nothing was installed (0), a program is running at the native driver layer (1). Thus, add a mode that says that a program is running at generic XDP layer (2). Applications will handle this fine in that older binaries will just indicate that something is attached at XDP layer, effectively this is similar to IFLA_XDP_FLAGS attr that we would have had modulo the redundancy. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-11 23:04:46 +00:00
prog_id = 0;
mode = XDP_ATTACHED_NONE;
err = rtnl_xdp_report_one(skb, dev, &prog_id, &mode, XDP_ATTACHED_SKB,
IFLA_XDP_SKB_PROG_ID, rtnl_xdp_prog_skb);
if (err)
goto err_cancel;
err = rtnl_xdp_report_one(skb, dev, &prog_id, &mode, XDP_ATTACHED_DRV,
IFLA_XDP_DRV_PROG_ID, rtnl_xdp_prog_drv);
if (err)
goto err_cancel;
err = rtnl_xdp_report_one(skb, dev, &prog_id, &mode, XDP_ATTACHED_HW,
IFLA_XDP_HW_PROG_ID, rtnl_xdp_prog_hw);
if (err)
goto err_cancel;
err = nla_put_u8(skb, IFLA_XDP_ATTACHED, mode);
if (err)
goto err_cancel;
if (prog_id && mode != XDP_ATTACHED_MULTI) {
err = nla_put_u32(skb, IFLA_XDP_PROG_ID, prog_id);
if (err)
goto err_cancel;
}
nla_nest_end(skb, xdp);
return 0;
err_cancel:
nla_nest_cancel(skb, xdp);
return err;
}
static u32 rtnl_get_event(unsigned long event)
{
u32 rtnl_event_type = IFLA_EVENT_NONE;
switch (event) {
case NETDEV_REBOOT:
rtnl_event_type = IFLA_EVENT_REBOOT;
break;
case NETDEV_FEAT_CHANGE:
rtnl_event_type = IFLA_EVENT_FEATURES;
break;
case NETDEV_BONDING_FAILOVER:
rtnl_event_type = IFLA_EVENT_BONDING_FAILOVER;
break;
case NETDEV_NOTIFY_PEERS:
rtnl_event_type = IFLA_EVENT_NOTIFY_PEERS;
break;
case NETDEV_RESEND_IGMP:
rtnl_event_type = IFLA_EVENT_IGMP_RESEND;
break;
case NETDEV_CHANGEINFODATA:
rtnl_event_type = IFLA_EVENT_BONDING_OPTIONS;
break;
default:
break;
}
return rtnl_event_type;
}
static int put_master_ifindex(struct sk_buff *skb, struct net_device *dev)
{
const struct net_device *upper_dev;
int ret = 0;
rcu_read_lock();
upper_dev = netdev_master_upper_dev_get_rcu(dev);
if (upper_dev)
ret = nla_put_u32(skb, IFLA_MASTER, upper_dev->ifindex);
rcu_read_unlock();
return ret;
}
static int nla_put_iflink(struct sk_buff *skb, const struct net_device *dev,
bool force)
{
int ifindex = dev_get_iflink(dev);
if (force || dev->ifindex != ifindex)
return nla_put_u32(skb, IFLA_LINK, ifindex);
return 0;
}
static noinline_for_stack int nla_put_ifalias(struct sk_buff *skb,
struct net_device *dev)
{
char buf[IFALIASZ];
int ret;
ret = dev_get_alias(dev, buf, sizeof(buf));
return ret > 0 ? nla_put_string(skb, IFLA_IFALIAS, buf) : 0;
}
static int rtnl_fill_link_netnsid(struct sk_buff *skb,
const struct net_device *dev,
struct net *src_net, gfp_t gfp)
{
bool put_iflink = false;
if (dev->rtnl_link_ops && dev->rtnl_link_ops->get_link_net) {
struct net *link_net = dev->rtnl_link_ops->get_link_net(dev);
if (!net_eq(dev_net(dev), link_net)) {
int id = peernet2id_alloc(src_net, link_net, gfp);
if (nla_put_s32(skb, IFLA_LINK_NETNSID, id))
return -EMSGSIZE;
put_iflink = true;
}
}
return nla_put_iflink(skb, dev, put_iflink);
}
static int rtnl_fill_link_af(struct sk_buff *skb,
const struct net_device *dev,
u32 ext_filter_mask)
{
const struct rtnl_af_ops *af_ops;
struct nlattr *af_spec;
af_spec = nla_nest_start_noflag(skb, IFLA_AF_SPEC);
if (!af_spec)
return -EMSGSIZE;
list_for_each_entry_rcu(af_ops, &rtnl_af_ops, list) {
struct nlattr *af;
int err;
if (!af_ops->fill_link_af)
continue;
af = nla_nest_start_noflag(skb, af_ops->family);
if (!af)
return -EMSGSIZE;
err = af_ops->fill_link_af(skb, dev, ext_filter_mask);
/*
* Caller may return ENODATA to indicate that there
* was no data to be dumped. This is not an error, it
* means we should trim the attribute header and
* continue.
*/
if (err == -ENODATA)
nla_nest_cancel(skb, af);
else if (err < 0)
return -EMSGSIZE;
nla_nest_end(skb, af);
}
nla_nest_end(skb, af_spec);
return 0;
}
static int rtnl_fill_alt_ifnames(struct sk_buff *skb,
const struct net_device *dev)
{
struct netdev_name_node *name_node;
int count = 0;
list_for_each_entry(name_node, &dev->name_node->list, list) {
if (nla_put_string(skb, IFLA_ALT_IFNAME, name_node->name))
return -EMSGSIZE;
count++;
}
return count;
}
static int rtnl_fill_prop_list(struct sk_buff *skb,
const struct net_device *dev)
{
struct nlattr *prop_list;
int ret;
prop_list = nla_nest_start(skb, IFLA_PROP_LIST);
if (!prop_list)
return -EMSGSIZE;
ret = rtnl_fill_alt_ifnames(skb, dev);
if (ret <= 0)
goto nest_cancel;
nla_nest_end(skb, prop_list);
return 0;
nest_cancel:
nla_nest_cancel(skb, prop_list);
return ret;
}
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
static int rtnl_fill_proto_down(struct sk_buff *skb,
const struct net_device *dev)
{
struct nlattr *pr;
u32 preason;
if (nla_put_u8(skb, IFLA_PROTO_DOWN, dev->proto_down))
goto nla_put_failure;
preason = dev->proto_down_reason;
if (!preason)
return 0;
pr = nla_nest_start(skb, IFLA_PROTO_DOWN_REASON);
if (!pr)
return -EMSGSIZE;
if (nla_put_u32(skb, IFLA_PROTO_DOWN_REASON_VALUE, preason)) {
nla_nest_cancel(skb, pr);
goto nla_put_failure;
}
nla_nest_end(skb, pr);
return 0;
nla_put_failure:
return -EMSGSIZE;
}
static int rtnl_fill_devlink_port(struct sk_buff *skb,
const struct net_device *dev)
{
struct nlattr *devlink_port_nest;
int ret;
devlink_port_nest = nla_nest_start(skb, IFLA_DEVLINK_PORT);
if (!devlink_port_nest)
return -EMSGSIZE;
if (dev->devlink_port) {
ret = devlink_nl_port_handle_fill(skb, dev->devlink_port);
if (ret < 0)
goto nest_cancel;
}
nla_nest_end(skb, devlink_port_nest);
return 0;
nest_cancel:
nla_nest_cancel(skb, devlink_port_nest);
return ret;
}
static int rtnl_fill_ifinfo(struct sk_buff *skb,
struct net_device *dev, struct net *src_net,
int type, u32 pid, u32 seq, u32 change,
unsigned int flags, u32 ext_filter_mask,
u32 event, int *new_nsid, int new_ifindex,
int tgt_netnsid, gfp_t gfp)
{
struct ifinfomsg *ifm;
struct nlmsghdr *nlh;
net_sched: add __rcu annotation to netdev->qdisc syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-11 20:06:23 +00:00
struct Qdisc *qdisc;
ASSERT_RTNL();
nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ifm), flags);
if (nlh == NULL)
return -EMSGSIZE;
ifm = nlmsg_data(nlh);
ifm->ifi_family = AF_UNSPEC;
ifm->__ifi_pad = 0;
ifm->ifi_type = dev->type;
ifm->ifi_index = dev->ifindex;
ifm->ifi_flags = dev_get_flags(dev);
ifm->ifi_change = change;
if (tgt_netnsid >= 0 && nla_put_s32(skb, IFLA_TARGET_NETNSID, tgt_netnsid))
goto nla_put_failure;
net_sched: add __rcu annotation to netdev->qdisc syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-11 20:06:23 +00:00
qdisc = rtnl_dereference(dev->qdisc);
if (nla_put_string(skb, IFLA_IFNAME, dev->name) ||
nla_put_u32(skb, IFLA_TXQLEN, dev->tx_queue_len) ||
nla_put_u8(skb, IFLA_OPERSTATE,
netif_running(dev) ? dev->operstate : IF_OPER_DOWN) ||
nla_put_u8(skb, IFLA_LINKMODE, dev->link_mode) ||
nla_put_u32(skb, IFLA_MTU, dev->mtu) ||
nla_put_u32(skb, IFLA_MIN_MTU, dev->min_mtu) ||
nla_put_u32(skb, IFLA_MAX_MTU, dev->max_mtu) ||
nla_put_u32(skb, IFLA_GROUP, dev->group) ||
nla_put_u32(skb, IFLA_PROMISCUITY, dev->promiscuity) ||
nla_put_u32(skb, IFLA_ALLMULTI, dev->allmulti) ||
nla_put_u32(skb, IFLA_NUM_TX_QUEUES, dev->num_tx_queues) ||
nla_put_u32(skb, IFLA_GSO_MAX_SEGS, dev->gso_max_segs) ||
nla_put_u32(skb, IFLA_GSO_MAX_SIZE, dev->gso_max_size) ||
nla_put_u32(skb, IFLA_GRO_MAX_SIZE, dev->gro_max_size) ||
nla_put_u32(skb, IFLA_GSO_IPV4_MAX_SIZE, dev->gso_ipv4_max_size) ||
nla_put_u32(skb, IFLA_GRO_IPV4_MAX_SIZE, dev->gro_ipv4_max_size) ||
nla_put_u32(skb, IFLA_TSO_MAX_SIZE, dev->tso_max_size) ||
nla_put_u32(skb, IFLA_TSO_MAX_SEGS, dev->tso_max_segs) ||
#ifdef CONFIG_RPS
nla_put_u32(skb, IFLA_NUM_RX_QUEUES, dev->num_rx_queues) ||
#endif
put_master_ifindex(skb, dev) ||
nla_put_u8(skb, IFLA_CARRIER, netif_carrier_ok(dev)) ||
net_sched: add __rcu annotation to netdev->qdisc syzbot found a data-race [1] which lead me to add __rcu annotations to netdev->qdisc, and proper accessors to get LOCKDEP support. [1] BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1: attach_default_qdiscs net/sched/sch_generic.c:1167 [inline] dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221 __dev_open+0x2e9/0x3a0 net/core/dev.c:1416 __dev_change_flags+0x167/0x3f0 net/core/dev.c:8139 rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150 __rtnl_newlink net/core/rtnetlink.c:3489 [inline] rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0: qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323 __tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050 tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211 rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-11 20:06:23 +00:00
(qdisc &&
nla_put_string(skb, IFLA_QDISC, qdisc->ops->id)) ||
nla_put_ifalias(skb, dev) ||
nla_put_u32(skb, IFLA_CARRIER_CHANGES,
atomic_read(&dev->carrier_up_count) +
atomic_read(&dev->carrier_down_count)) ||
nla_put_u32(skb, IFLA_CARRIER_UP_COUNT,
atomic_read(&dev->carrier_up_count)) ||
nla_put_u32(skb, IFLA_CARRIER_DOWN_COUNT,
atomic_read(&dev->carrier_down_count)))
goto nla_put_failure;
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
if (rtnl_fill_proto_down(skb, dev))
goto nla_put_failure;
if (event != IFLA_EVENT_NONE) {
if (nla_put_u32(skb, IFLA_EVENT, event))
goto nla_put_failure;
}
if (rtnl_fill_link_ifmap(skb, dev))
goto nla_put_failure;
if (dev->addr_len) {
if (nla_put(skb, IFLA_ADDRESS, dev->addr_len, dev->dev_addr) ||
nla_put(skb, IFLA_BROADCAST, dev->addr_len, dev->broadcast))
goto nla_put_failure;
}
if (rtnl_phys_port_id_fill(skb, dev))
goto nla_put_failure;
if (rtnl_phys_port_name_fill(skb, dev))
goto nla_put_failure;
if (rtnl_phys_switch_id_fill(skb, dev))
goto nla_put_failure;
if (rtnl_fill_stats(skb, dev))
goto nla_put_failure;
if (rtnl_fill_vf(skb, dev, ext_filter_mask))
goto nla_put_failure;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
rtnetlink: Only supply IFLA_VF_PORTS information when RTEXT_FILTER_VF is set Since 115c9b81928360d769a76c632bae62d15206a94a (rtnetlink: Fix problem with buffer allocation), RTM_NEWLINK messages only contain the IFLA_VFINFO_LIST attribute if they were solicited by a GETLINK message containing an IFLA_EXT_MASK attribute with the RTEXT_FILTER_VF flag. That was done because some user programs broke when they received more data than expected - because IFLA_VFINFO_LIST contains information for each VF it can become large if there are many VFs. However, the IFLA_VF_PORTS attribute, supplied for devices which implement ndo_get_vf_port (currently the 'enic' driver only), has the same problem. It supplies per-VF information and can therefore become large, but it is not currently conditional on the IFLA_EXT_MASK value. Worse, it interacts badly with the existing EXT_MASK handling. When IFLA_EXT_MASK is not supplied, the buffer for netlink replies is fixed at NLMSG_GOODSIZE. If the information for IFLA_VF_PORTS exceeds this, then rtnl_fill_ifinfo() returns -EMSGSIZE on the first message in a packet. netlink_dump() will misinterpret this as having finished the listing and omit data for this interface and all subsequent ones. That can cause getifaddrs(3) to enter an infinite loop. This patch addresses the problem by only supplying IFLA_VF_PORTS when IFLA_EXT_MASK is supplied with the RTEXT_FILTER_VF flag set. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24 00:22:36 +00:00
if (rtnl_port_fill(skb, dev, ext_filter_mask))
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
goto nla_put_failure;
if (rtnl_xdp_fill(skb, dev))
goto nla_put_failure;
if (dev->rtnl_link_ops || rtnl_have_link_slave_info(dev)) {
if (rtnl_link_fill(skb, dev) < 0)
goto nla_put_failure;
}
if (rtnl_fill_link_netnsid(skb, dev, src_net, gfp))
goto nla_put_failure;
if (new_nsid &&
nla_put_s32(skb, IFLA_NEW_NETNSID, *new_nsid) < 0)
goto nla_put_failure;
if (new_ifindex &&
nla_put_s32(skb, IFLA_NEW_IFINDEX, new_ifindex) < 0)
goto nla_put_failure;
if (memchr_inv(dev->perm_addr, '\0', dev->addr_len) &&
nla_put(skb, IFLA_PERM_ADDRESS, dev->addr_len, dev->perm_addr))
goto nla_put_failure;
rcu_read_lock();
if (rtnl_fill_link_af(skb, dev, ext_filter_mask))
goto nla_put_failure_rcu;
rcu_read_unlock();
if (rtnl_fill_prop_list(skb, dev))
goto nla_put_failure;
rtnetlink: add IFLA_PARENT_[DEV|DEV_BUS]_NAME In some cases, for example in the upcoming WWAN framework changes, there's no natural "parent netdev", so sometimes dummy netdevs are created or similar. IFLA_PARENT_DEV_NAME is a new attribute intended to contain a device (sysfs, struct device) name that can be used instead when creating a new netdev, if the rtnetlink family implements it. As suggested by Parav Pandit, we also introduce IFLA_PARENT_DEV_BUS_NAME attribute in order to uniquely identify a device on the system (with bus/name pair). ip-link(8) support for the generic parent device attributes will help us avoid code duplication, so no other link type will require a custom code to handle the parent name attribute. E.g. the WWAN interface creation command will looks like this: $ ip link add wwan0-1 parent-dev wwan0 type wwan channel-id 1 So, some future subsystem (or driver) FOO will have an interface creation command that looks like this: $ ip link add foo1-3 parent-dev foo1 type foo bar-id 3 baz-type Y Below is an example of dumping link info of a random device with these new attributes: $ ip --details link show wlp0s20f3 4: wlp0s20f3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DORMANT group default qlen 1000 ... parent_bus pci parent_dev 0000:00:14.3 Co-developed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Co-developed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12 08:20:55 +00:00
if (dev->dev.parent &&
nla_put_string(skb, IFLA_PARENT_DEV_NAME,
dev_name(dev->dev.parent)))
goto nla_put_failure;
if (dev->dev.parent && dev->dev.parent->bus &&
nla_put_string(skb, IFLA_PARENT_DEV_BUS_NAME,
dev->dev.parent->bus->name))
goto nla_put_failure;
if (rtnl_fill_devlink_port(skb, dev))
goto nla_put_failure;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:09:00 +00:00
nlmsg_end(skb, nlh);
return 0;
nla_put_failure_rcu:
rcu_read_unlock();
nla_put_failure:
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
static const struct nla_policy ifla_policy[IFLA_MAX+1] = {
[IFLA_IFNAME] = { .type = NLA_STRING, .len = IFNAMSIZ-1 },
[IFLA_ADDRESS] = { .type = NLA_BINARY, .len = MAX_ADDR_LEN },
[IFLA_BROADCAST] = { .type = NLA_BINARY, .len = MAX_ADDR_LEN },
[IFLA_MAP] = { .len = sizeof(struct rtnl_link_ifmap) },
[IFLA_MTU] = { .type = NLA_U32 },
[IFLA_LINK] = { .type = NLA_U32 },
[IFLA_MASTER] = { .type = NLA_U32 },
[IFLA_CARRIER] = { .type = NLA_U8 },
[IFLA_TXQLEN] = { .type = NLA_U32 },
[IFLA_WEIGHT] = { .type = NLA_U32 },
[IFLA_OPERSTATE] = { .type = NLA_U8 },
[IFLA_LINKMODE] = { .type = NLA_U8 },
[IFLA_LINKINFO] = { .type = NLA_NESTED },
[IFLA_NET_NS_PID] = { .type = NLA_U32 },
[IFLA_NET_NS_FD] = { .type = NLA_U32 },
/* IFLA_IFALIAS is a string, but policy is set to NLA_BINARY to
* allow 0-length string (needed to remove an alias).
*/
[IFLA_IFALIAS] = { .type = NLA_BINARY, .len = IFALIASZ - 1 },
[IFLA_VFINFO_LIST] = {. type = NLA_NESTED },
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
[IFLA_VF_PORTS] = { .type = NLA_NESTED },
[IFLA_PORT_SELF] = { .type = NLA_NESTED },
[IFLA_AF_SPEC] = { .type = NLA_NESTED },
[IFLA_EXT_MASK] = { .type = NLA_U32 },
[IFLA_PROMISCUITY] = { .type = NLA_U32 },
[IFLA_NUM_TX_QUEUES] = { .type = NLA_U32 },
[IFLA_NUM_RX_QUEUES] = { .type = NLA_U32 },
[IFLA_GSO_MAX_SEGS] = { .type = NLA_U32 },
[IFLA_GSO_MAX_SIZE] = { .type = NLA_U32 },
[IFLA_PHYS_PORT_ID] = { .type = NLA_BINARY, .len = MAX_PHYS_ITEM_ID_LEN },
[IFLA_CARRIER_CHANGES] = { .type = NLA_U32 }, /* ignored */
[IFLA_PHYS_SWITCH_ID] = { .type = NLA_BINARY, .len = MAX_PHYS_ITEM_ID_LEN },
[IFLA_LINK_NETNSID] = { .type = NLA_S32 },
[IFLA_PROTO_DOWN] = { .type = NLA_U8 },
[IFLA_XDP] = { .type = NLA_NESTED },
[IFLA_EVENT] = { .type = NLA_U32 },
[IFLA_GROUP] = { .type = NLA_U32 },
[IFLA_TARGET_NETNSID] = { .type = NLA_S32 },
[IFLA_CARRIER_UP_COUNT] = { .type = NLA_U32 },
[IFLA_CARRIER_DOWN_COUNT] = { .type = NLA_U32 },
[IFLA_MIN_MTU] = { .type = NLA_U32 },
[IFLA_MAX_MTU] = { .type = NLA_U32 },
[IFLA_PROP_LIST] = { .type = NLA_NESTED },
[IFLA_ALT_IFNAME] = { .type = NLA_STRING,
.len = ALTIFNAMSIZ - 1 },
[IFLA_PERM_ADDRESS] = { .type = NLA_REJECT },
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
[IFLA_PROTO_DOWN_REASON] = { .type = NLA_NESTED },
[IFLA_NEW_IFINDEX] = NLA_POLICY_MIN(NLA_S32, 1),
[IFLA_PARENT_DEV_NAME] = { .type = NLA_NUL_STRING },
[IFLA_GRO_MAX_SIZE] = { .type = NLA_U32 },
[IFLA_TSO_MAX_SIZE] = { .type = NLA_REJECT },
[IFLA_TSO_MAX_SEGS] = { .type = NLA_REJECT },
[IFLA_ALLMULTI] = { .type = NLA_REJECT },
[IFLA_GSO_IPV4_MAX_SIZE] = { .type = NLA_U32 },
[IFLA_GRO_IPV4_MAX_SIZE] = { .type = NLA_U32 },
};
static const struct nla_policy ifla_info_policy[IFLA_INFO_MAX+1] = {
[IFLA_INFO_KIND] = { .type = NLA_STRING },
[IFLA_INFO_DATA] = { .type = NLA_NESTED },
[IFLA_INFO_SLAVE_KIND] = { .type = NLA_STRING },
[IFLA_INFO_SLAVE_DATA] = { .type = NLA_NESTED },
};
static const struct nla_policy ifla_vf_policy[IFLA_VF_MAX+1] = {
[IFLA_VF_MAC] = { .len = sizeof(struct ifla_vf_mac) },
[IFLA_VF_BROADCAST] = { .type = NLA_REJECT },
[IFLA_VF_VLAN] = { .len = sizeof(struct ifla_vf_vlan) },
[IFLA_VF_VLAN_LIST] = { .type = NLA_NESTED },
[IFLA_VF_TX_RATE] = { .len = sizeof(struct ifla_vf_tx_rate) },
[IFLA_VF_SPOOFCHK] = { .len = sizeof(struct ifla_vf_spoofchk) },
[IFLA_VF_RATE] = { .len = sizeof(struct ifla_vf_rate) },
[IFLA_VF_LINK_STATE] = { .len = sizeof(struct ifla_vf_link_state) },
[IFLA_VF_RSS_QUERY_EN] = { .len = sizeof(struct ifla_vf_rss_query_en) },
[IFLA_VF_STATS] = { .type = NLA_NESTED },
[IFLA_VF_TRUST] = { .len = sizeof(struct ifla_vf_trust) },
[IFLA_VF_IB_NODE_GUID] = { .len = sizeof(struct ifla_vf_guid) },
[IFLA_VF_IB_PORT_GUID] = { .len = sizeof(struct ifla_vf_guid) },
};
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
static const struct nla_policy ifla_port_policy[IFLA_PORT_MAX+1] = {
[IFLA_PORT_VF] = { .type = NLA_U32 },
[IFLA_PORT_PROFILE] = { .type = NLA_STRING,
.len = PORT_PROFILE_MAX },
[IFLA_PORT_INSTANCE_UUID] = { .type = NLA_BINARY,
.len = PORT_UUID_MAX },
[IFLA_PORT_HOST_UUID] = { .type = NLA_STRING,
.len = PORT_UUID_MAX },
[IFLA_PORT_REQUEST] = { .type = NLA_U8, },
[IFLA_PORT_RESPONSE] = { .type = NLA_U16, },
/* Unused, but we need to keep it here since user space could
* fill it. It's also broken with regard to NLA_BINARY use in
* combination with structs.
*/
[IFLA_PORT_VSI_TYPE] = { .type = NLA_BINARY,
.len = sizeof(struct ifla_port_vsi) },
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
};
static const struct nla_policy ifla_xdp_policy[IFLA_XDP_MAX + 1] = {
[IFLA_XDP_UNSPEC] = { .strict_start_type = IFLA_XDP_EXPECTED_FD },
[IFLA_XDP_FD] = { .type = NLA_S32 },
[IFLA_XDP_EXPECTED_FD] = { .type = NLA_S32 },
[IFLA_XDP_ATTACHED] = { .type = NLA_U8 },
[IFLA_XDP_FLAGS] = { .type = NLA_U32 },
[IFLA_XDP_PROG_ID] = { .type = NLA_U32 },
};
static const struct rtnl_link_ops *linkinfo_to_kind_ops(const struct nlattr *nla)
{
const struct rtnl_link_ops *ops = NULL;
struct nlattr *linfo[IFLA_INFO_MAX + 1];
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
if (nla_parse_nested_deprecated(linfo, IFLA_INFO_MAX, nla, ifla_info_policy, NULL) < 0)
return NULL;
if (linfo[IFLA_INFO_KIND]) {
char kind[MODULE_NAME_LEN];
nla_strscpy(kind, linfo[IFLA_INFO_KIND], sizeof(kind));
ops = rtnl_link_ops_get(kind);
}
return ops;
}
static bool link_master_filtered(struct net_device *dev, int master_idx)
{
struct net_device *master;
if (!master_idx)
return false;
master = netdev_master_upper_dev_get(dev);
/* 0 is already used to denote IFLA_MASTER wasn't passed, therefore need
* another invalid value for ifindex to denote "no master".
*/
if (master_idx == -1)
return !!master;
if (!master || master->ifindex != master_idx)
return true;
return false;
}
static bool link_kind_filtered(const struct net_device *dev,
const struct rtnl_link_ops *kind_ops)
{
if (kind_ops && dev->rtnl_link_ops != kind_ops)
return true;
return false;
}
static bool link_dump_filtered(struct net_device *dev,
int master_idx,
const struct rtnl_link_ops *kind_ops)
{
if (link_master_filtered(dev, master_idx) ||
link_kind_filtered(dev, kind_ops))
return true;
return false;
}
/**
* rtnl_get_net_ns_capable - Get netns if sufficiently privileged.
* @sk: netlink socket
* @netnsid: network namespace identifier
*
* Returns the network namespace identified by netnsid on success or an error
* pointer on failure.
*/
struct net *rtnl_get_net_ns_capable(struct sock *sk, int netnsid)
{
struct net *net;
rtnetlink: give a user socket to get_target_net() This function is used from two places: rtnl_dump_ifinfo and rtnl_getlink. In rtnl_getlink(), we give a request skb into get_target_net(), but in rtnl_dump_ifinfo, we give a response skb into get_target_net(). The problem here is that NETLINK_CB() isn't initialized for the response skb. In both cases we can get a user socket and give it instead of skb into get_target_net(). This bug was found by syzkaller with this call-trace: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 3149 Comm: syzkaller140561 Not tainted 4.15.0-rc4-mm1+ #47 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__netlink_ns_capable+0x8b/0x120 net/netlink/af_netlink.c:868 RSP: 0018:ffff8801c880f348 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8443f900 RDX: 000000000000007b RSI: ffffffff86510f40 RDI: 00000000000003d8 RBP: ffff8801c880f360 R08: 0000000000000000 R09: 1ffff10039101e4f R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86510f40 R13: 000000000000000c R14: 0000000000000004 R15: 0000000000000011 FS: 0000000001a1a880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020151000 CR3: 00000001c9511005 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: netlink_ns_capable+0x26/0x30 net/netlink/af_netlink.c:886 get_target_net+0x9d/0x120 net/core/rtnetlink.c:1765 rtnl_dump_ifinfo+0x2e5/0xee0 net/core/rtnetlink.c:1806 netlink_dump+0x48c/0xce0 net/netlink/af_netlink.c:2222 __netlink_dump_start+0x4f0/0x6d0 net/netlink/af_netlink.c:2319 netlink_dump_start include/linux/netlink.h:214 [inline] rtnetlink_rcv_msg+0x7f0/0xb10 net/core/rtnetlink.c:4485 netlink_rcv_skb+0x21e/0x460 net/netlink/af_netlink.c:2441 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4540 netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline] netlink_unicast+0x4be/0x6a0 net/netlink/af_netlink.c:1334 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897 Cc: Jiri Benc <jbenc@redhat.com> Fixes: 79e1ad148c84 ("rtnetlink: use netnsid to query interface") Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03 07:27:33 +00:00
net = get_net_ns_by_id(sock_net(sk), netnsid);
if (!net)
return ERR_PTR(-EINVAL);
/* For now, the caller is required to have CAP_NET_ADMIN in
* the user namespace owning the target net ns.
*/
rtnetlink: give a user socket to get_target_net() This function is used from two places: rtnl_dump_ifinfo and rtnl_getlink. In rtnl_getlink(), we give a request skb into get_target_net(), but in rtnl_dump_ifinfo, we give a response skb into get_target_net(). The problem here is that NETLINK_CB() isn't initialized for the response skb. In both cases we can get a user socket and give it instead of skb into get_target_net(). This bug was found by syzkaller with this call-trace: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 3149 Comm: syzkaller140561 Not tainted 4.15.0-rc4-mm1+ #47 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__netlink_ns_capable+0x8b/0x120 net/netlink/af_netlink.c:868 RSP: 0018:ffff8801c880f348 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8443f900 RDX: 000000000000007b RSI: ffffffff86510f40 RDI: 00000000000003d8 RBP: ffff8801c880f360 R08: 0000000000000000 R09: 1ffff10039101e4f R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86510f40 R13: 000000000000000c R14: 0000000000000004 R15: 0000000000000011 FS: 0000000001a1a880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020151000 CR3: 00000001c9511005 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: netlink_ns_capable+0x26/0x30 net/netlink/af_netlink.c:886 get_target_net+0x9d/0x120 net/core/rtnetlink.c:1765 rtnl_dump_ifinfo+0x2e5/0xee0 net/core/rtnetlink.c:1806 netlink_dump+0x48c/0xce0 net/netlink/af_netlink.c:2222 __netlink_dump_start+0x4f0/0x6d0 net/netlink/af_netlink.c:2319 netlink_dump_start include/linux/netlink.h:214 [inline] rtnetlink_rcv_msg+0x7f0/0xb10 net/core/rtnetlink.c:4485 netlink_rcv_skb+0x21e/0x460 net/netlink/af_netlink.c:2441 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4540 netlink_unicast_kernel net/netlink/af_netlink.c:1308 [inline] netlink_unicast+0x4be/0x6a0 net/netlink/af_netlink.c:1334 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1897 Cc: Jiri Benc <jbenc@redhat.com> Fixes: 79e1ad148c84 ("rtnetlink: use netnsid to query interface") Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-03 07:27:33 +00:00
if (!sk_ns_capable(sk, net->user_ns, CAP_NET_ADMIN)) {
put_net(net);
return ERR_PTR(-EACCES);
}
return net;
}
EXPORT_SYMBOL_GPL(rtnl_get_net_ns_capable);
static int rtnl_valid_dump_ifinfo_req(const struct nlmsghdr *nlh,
bool strict_check, struct nlattr **tb,
struct netlink_ext_ack *extack)
{
int hdrlen;
if (strict_check) {
struct ifinfomsg *ifm;
if (nlh->nlmsg_len < nlmsg_msg_size(sizeof(*ifm))) {
NL_SET_ERR_MSG(extack, "Invalid header for link dump");
return -EINVAL;
}
ifm = nlmsg_data(nlh);
if (ifm->__ifi_pad || ifm->ifi_type || ifm->ifi_flags ||
ifm->ifi_change) {
NL_SET_ERR_MSG(extack, "Invalid values in header for link dump request");
return -EINVAL;
}
if (ifm->ifi_index) {
NL_SET_ERR_MSG(extack, "Filter by device index not supported for link dumps");
return -EINVAL;
}
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
return nlmsg_parse_deprecated_strict(nlh, sizeof(*ifm), tb,
IFLA_MAX, ifla_policy,
extack);
}
/* A hack to preserve kernel<->userspace interface.
* The correct header is ifinfomsg. It is consistent with rtnl_getlink.
* However, before Linux v3.9 the code here assumed rtgenmsg and that's
* what iproute2 < v3.9.0 used.
* We can detect the old iproute2. Even including the IFLA_EXT_MASK
* attribute, its netlink message is shorter than struct ifinfomsg.
*/
hdrlen = nlmsg_len(nlh) < sizeof(struct ifinfomsg) ?
sizeof(struct rtgenmsg) : sizeof(struct ifinfomsg);
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
return nlmsg_parse_deprecated(nlh, hdrlen, tb, IFLA_MAX, ifla_policy,
extack);
}
static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
{
struct netlink_ext_ack *extack = cb->extack;
const struct nlmsghdr *nlh = cb->nlh;
struct net *net = sock_net(skb->sk);
struct net *tgt_net = net;
int h, s_h;
int idx = 0, s_idx;
struct net_device *dev;
struct hlist_head *head;
struct nlattr *tb[IFLA_MAX+1];
u32 ext_filter_mask = 0;
const struct rtnl_link_ops *kind_ops = NULL;
unsigned int flags = NLM_F_MULTI;
int master_idx = 0;
int netnsid = -1;
int err, i;
s_h = cb->args[0];
s_idx = cb->args[1];
err = rtnl_valid_dump_ifinfo_req(nlh, cb->strict_check, tb, extack);
if (err < 0) {
if (cb->strict_check)
return err;
goto walk_entries;
}
for (i = 0; i <= IFLA_MAX; ++i) {
if (!tb[i])
continue;
/* new attributes should only be added with strict checking */
switch (i) {
case IFLA_TARGET_NETNSID:
netnsid = nla_get_s32(tb[i]);
tgt_net = rtnl_get_net_ns_capable(skb->sk, netnsid);
if (IS_ERR(tgt_net)) {
NL_SET_ERR_MSG(extack, "Invalid target network namespace id");
return PTR_ERR(tgt_net);
}
break;
case IFLA_EXT_MASK:
ext_filter_mask = nla_get_u32(tb[i]);
break;
case IFLA_MASTER:
master_idx = nla_get_u32(tb[i]);
break;
case IFLA_LINKINFO:
kind_ops = linkinfo_to_kind_ops(tb[i]);
break;
default:
if (cb->strict_check) {
NL_SET_ERR_MSG(extack, "Unsupported attribute in link dump request");
return -EINVAL;
}
}
}
if (master_idx || kind_ops)
flags |= NLM_F_DUMP_FILTERED;
walk_entries:
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &tgt_net->dev_index_head[h];
net: do not use rcu in rtnl_dump_ifinfo() We did a failed attempt in the past to only use rcu in rtnl dump operations (commit e67f88dd12f6 "net: dont hold rtnl mutex during netlink dump callbacks") Now that dumps are holding RTNL anyway, there is no need to also use rcu locking, as it forbids any scheduling ability, like GFP_KERNEL allocations that controlling path should use instead of GFP_ATOMIC whenever possible. This should fix following splat Cong Wang reported : [ INFO: suspicious RCU usage. ] 3.19.0+ #805 Tainted: G W include/linux/rcupdate.h:538 Illegal context switch in RCU read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by ip/771: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8182b8f4>] netlink_dump+0x21/0x26c #1: (rcu_read_lock){......}, at: [<ffffffff817d785b>] rcu_read_lock+0x0/0x6e stack backtrace: CPU: 3 PID: 771 Comm: ip Tainted: G W 3.19.0+ #805 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000001 ffff8800d51e7718 ffffffff81a27457 0000000029e729e6 ffff8800d6108000 ffff8800d51e7748 ffffffff810b539b ffffffff820013dd 00000000000001c8 0000000000000000 ffff8800d7448088 ffff8800d51e7758 Call Trace: [<ffffffff81a27457>] dump_stack+0x4c/0x65 [<ffffffff810b539b>] lockdep_rcu_suspicious+0x107/0x110 [<ffffffff8109796f>] rcu_preempt_sleep_check+0x45/0x47 [<ffffffff8109e457>] ___might_sleep+0x1d/0x1cb [<ffffffff8109e67d>] __might_sleep+0x78/0x80 [<ffffffff814b9b1f>] idr_alloc+0x45/0xd1 [<ffffffff810cb7ab>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff814b9f9d>] ? idr_for_each+0x53/0x101 [<ffffffff817c1383>] alloc_netid+0x61/0x69 [<ffffffff817c14c3>] __peernet2id+0x79/0x8d [<ffffffff817c1ab7>] peernet2id+0x13/0x1f [<ffffffff817d8673>] rtnl_fill_ifinfo+0xa8d/0xc20 [<ffffffff810b17d9>] ? __lock_is_held+0x39/0x52 [<ffffffff817d894f>] rtnl_dump_ifinfo+0x149/0x213 [<ffffffff8182b9c2>] netlink_dump+0xef/0x26c [<ffffffff8182bcba>] netlink_recvmsg+0x17b/0x2c5 [<ffffffff817b0adc>] __sock_recvmsg+0x4e/0x59 [<ffffffff817b1b40>] sock_recvmsg+0x3f/0x51 [<ffffffff817b1f9a>] ___sys_recvmsg+0xf6/0x1d9 [<ffffffff8115dc67>] ? handle_pte_fault+0x6e1/0xd3d [<ffffffff8100a3a0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109f45b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109f6ac>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cb7ab>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811abde8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac556>] ? __fget_light+0x2d/0x52 [<ffffffff817b376f>] __sys_recvmsg+0x42/0x60 [<ffffffff817b379f>] SyS_recvmsg+0x12/0x1c Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 0c7aecd4bde4b7302 ("netns: add rtnl cmd to add and get peer netns ids") Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27 17:42:50 +00:00
hlist_for_each_entry(dev, head, index_hlist) {
if (link_dump_filtered(dev, master_idx, kind_ops))
goto cont;
if (idx < s_idx)
goto cont;
err = rtnl_fill_ifinfo(skb, dev, net,
RTM_NEWLINK,
NETLINK_CB(cb->skb).portid,
nlh->nlmsg_seq, 0, flags,
ext_filter_mask, 0, NULL, 0,
netnsid, GFP_KERNEL);
if (err < 0) {
if (likely(skb->len))
goto out;
goto out_err;
}
cont:
idx++;
}
}
out:
err = skb->len;
out_err:
cb->args[1] = idx;
cb->args[0] = h;
cb->seq = tgt_net->dev_base_seq;
nl_dump_check_consistent(cb, nlmsg_hdr(skb));
if (netnsid >= 0)
put_net(tgt_net);
return err;
}
2023-08-19 01:26:02 +00:00
int rtnl_nla_parse_ifinfomsg(struct nlattr **tb, const struct nlattr *nla_peer,
struct netlink_ext_ack *exterr)
{
2023-08-19 01:26:02 +00:00
const struct ifinfomsg *ifmp;
const struct nlattr *attrs;
size_t len;
ifmp = nla_data(nla_peer);
attrs = nla_data(nla_peer) + sizeof(struct ifinfomsg);
len = nla_len(nla_peer) - sizeof(struct ifinfomsg);
if (ifmp->ifi_index < 0) {
NL_SET_ERR_MSG_ATTR(exterr, nla_peer,
"ifindex can't be negative");
return -EINVAL;
}
return nla_parse_deprecated(tb, IFLA_MAX, attrs, len, ifla_policy,
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
exterr);
}
2023-08-19 01:26:02 +00:00
EXPORT_SYMBOL(rtnl_nla_parse_ifinfomsg);
struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[])
{
struct net *net;
/* Examine the link attributes and figure out which
* network namespace we are talking about.
*/
if (tb[IFLA_NET_NS_PID])
net = get_net_ns_by_pid(nla_get_u32(tb[IFLA_NET_NS_PID]));
else if (tb[IFLA_NET_NS_FD])
net = get_net_ns_by_fd(nla_get_u32(tb[IFLA_NET_NS_FD]));
else
net = get_net(src_net);
return net;
}
EXPORT_SYMBOL(rtnl_link_get_net);
/* Figure out which network namespace we are talking about by
* examining the link attributes in the following order:
*
* 1. IFLA_NET_NS_PID
* 2. IFLA_NET_NS_FD
* 3. IFLA_TARGET_NETNSID
*/
static struct net *rtnl_link_get_net_by_nlattr(struct net *src_net,
struct nlattr *tb[])
{
struct net *net;
if (tb[IFLA_NET_NS_PID] || tb[IFLA_NET_NS_FD])
return rtnl_link_get_net(src_net, tb);
if (!tb[IFLA_TARGET_NETNSID])
return get_net(src_net);
net = get_net_ns_by_id(src_net, nla_get_u32(tb[IFLA_TARGET_NETNSID]));
if (!net)
return ERR_PTR(-EINVAL);
return net;
}
static struct net *rtnl_link_get_net_capable(const struct sk_buff *skb,
struct net *src_net,
struct nlattr *tb[], int cap)
{
struct net *net;
net = rtnl_link_get_net_by_nlattr(src_net, tb);
if (IS_ERR(net))
return net;
if (!netlink_ns_capable(skb, net->user_ns, cap)) {
put_net(net);
return ERR_PTR(-EPERM);
}
return net;
}
/* Verify that rtnetlink requests do not pass additional properties
* potentially referring to different network namespaces.
*/
static int rtnl_ensure_unique_netns(struct nlattr *tb[],
struct netlink_ext_ack *extack,
bool netns_id_only)
{
if (netns_id_only) {
if (!tb[IFLA_NET_NS_PID] && !tb[IFLA_NET_NS_FD])
return 0;
NL_SET_ERR_MSG(extack, "specified netns attribute not supported");
return -EOPNOTSUPP;
}
if (tb[IFLA_TARGET_NETNSID] && (tb[IFLA_NET_NS_PID] || tb[IFLA_NET_NS_FD]))
goto invalid_attr;
if (tb[IFLA_NET_NS_PID] && (tb[IFLA_TARGET_NETNSID] || tb[IFLA_NET_NS_FD]))
goto invalid_attr;
if (tb[IFLA_NET_NS_FD] && (tb[IFLA_TARGET_NETNSID] || tb[IFLA_NET_NS_PID]))
goto invalid_attr;
return 0;
invalid_attr:
NL_SET_ERR_MSG(extack, "multiple netns identifying attributes specified");
return -EINVAL;
}
static int rtnl_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate,
int max_tx_rate)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (!ops->ndo_set_vf_rate)
return -EOPNOTSUPP;
if (max_tx_rate && max_tx_rate < min_tx_rate)
return -EINVAL;
return ops->ndo_set_vf_rate(dev, vf, min_tx_rate, max_tx_rate);
}
static int validate_linkmsg(struct net_device *dev, struct nlattr *tb[],
struct netlink_ext_ack *extack)
{
if (tb[IFLA_ADDRESS] &&
nla_len(tb[IFLA_ADDRESS]) < dev->addr_len)
return -EINVAL;
if (tb[IFLA_BROADCAST] &&
nla_len(tb[IFLA_BROADCAST]) < dev->addr_len)
return -EINVAL;
if (tb[IFLA_GSO_MAX_SIZE] &&
nla_get_u32(tb[IFLA_GSO_MAX_SIZE]) > dev->tso_max_size) {
NL_SET_ERR_MSG(extack, "too big gso_max_size");
return -EINVAL;
}
if (tb[IFLA_GSO_MAX_SEGS] &&
(nla_get_u32(tb[IFLA_GSO_MAX_SEGS]) > GSO_MAX_SEGS ||
nla_get_u32(tb[IFLA_GSO_MAX_SEGS]) > dev->tso_max_segs)) {
NL_SET_ERR_MSG(extack, "too big gso_max_segs");
return -EINVAL;
}
if (tb[IFLA_GRO_MAX_SIZE] &&
nla_get_u32(tb[IFLA_GRO_MAX_SIZE]) > GRO_MAX_SIZE) {
NL_SET_ERR_MSG(extack, "too big gro_max_size");
return -EINVAL;
}
if (tb[IFLA_GSO_IPV4_MAX_SIZE] &&
nla_get_u32(tb[IFLA_GSO_IPV4_MAX_SIZE]) > dev->tso_max_size) {
NL_SET_ERR_MSG(extack, "too big gso_ipv4_max_size");
return -EINVAL;
}
if (tb[IFLA_GRO_IPV4_MAX_SIZE] &&
nla_get_u32(tb[IFLA_GRO_IPV4_MAX_SIZE]) > GRO_MAX_SIZE) {
NL_SET_ERR_MSG(extack, "too big gro_ipv4_max_size");
return -EINVAL;
}
if (tb[IFLA_AF_SPEC]) {
struct nlattr *af;
int rem, err;
nla_for_each_nested(af, tb[IFLA_AF_SPEC], rem) {
const struct rtnl_af_ops *af_ops;
af_ops = rtnl_af_lookup(nla_type(af));
if (!af_ops)
return -EAFNOSUPPORT;
if (!af_ops->set_link_af)
return -EOPNOTSUPP;
if (af_ops->validate_link_af) {
err = af_ops->validate_link_af(dev, af, extack);
if (err < 0)
return err;
}
}
}
return 0;
}
static int handle_infiniband_guid(struct net_device *dev, struct ifla_vf_guid *ivt,
int guid_type)
{
const struct net_device_ops *ops = dev->netdev_ops;
return ops->ndo_set_vf_guid(dev, ivt->vf, ivt->guid, guid_type);
}
static int handle_vf_guid(struct net_device *dev, struct ifla_vf_guid *ivt, int guid_type)
{
if (dev->type != ARPHRD_INFINIBAND)
return -EOPNOTSUPP;
return handle_infiniband_guid(dev, ivt, guid_type);
}
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
static int do_setvfinfo(struct net_device *dev, struct nlattr **tb)
{
const struct net_device_ops *ops = dev->netdev_ops;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
int err = -EINVAL;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (tb[IFLA_VF_MAC]) {
struct ifla_vf_mac *ivm = nla_data(tb[IFLA_VF_MAC]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivm->vf >= INT_MAX)
return -EINVAL;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_mac)
err = ops->ndo_set_vf_mac(dev, ivm->vf,
ivm->mac);
if (err < 0)
return err;
}
if (tb[IFLA_VF_VLAN]) {
struct ifla_vf_vlan *ivv = nla_data(tb[IFLA_VF_VLAN]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivv->vf >= INT_MAX)
return -EINVAL;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_vlan)
err = ops->ndo_set_vf_vlan(dev, ivv->vf, ivv->vlan,
ivv->qos,
htons(ETH_P_8021Q));
if (err < 0)
return err;
}
if (tb[IFLA_VF_VLAN_LIST]) {
struct ifla_vf_vlan_info *ivvl[MAX_VLAN_LIST_LEN];
struct nlattr *attr;
int rem, len = 0;
err = -EOPNOTSUPP;
if (!ops->ndo_set_vf_vlan)
return err;
nla_for_each_nested(attr, tb[IFLA_VF_VLAN_LIST], rem) {
if (nla_type(attr) != IFLA_VF_VLAN_INFO ||
nla_len(attr) < NLA_HDRLEN) {
return -EINVAL;
}
if (len >= MAX_VLAN_LIST_LEN)
return -EOPNOTSUPP;
ivvl[len] = nla_data(attr);
len++;
}
if (len == 0)
return -EINVAL;
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivvl[0]->vf >= INT_MAX)
return -EINVAL;
err = ops->ndo_set_vf_vlan(dev, ivvl[0]->vf, ivvl[0]->vlan,
ivvl[0]->qos, ivvl[0]->vlan_proto);
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (err < 0)
return err;
}
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (tb[IFLA_VF_TX_RATE]) {
struct ifla_vf_tx_rate *ivt = nla_data(tb[IFLA_VF_TX_RATE]);
struct ifla_vf_info ivf;
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivt->vf >= INT_MAX)
return -EINVAL;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
err = -EOPNOTSUPP;
if (ops->ndo_get_vf_config)
err = ops->ndo_get_vf_config(dev, ivt->vf, &ivf);
if (err < 0)
return err;
err = rtnl_set_vf_rate(dev, ivt->vf,
ivf.min_tx_rate, ivt->rate);
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (err < 0)
return err;
}
if (tb[IFLA_VF_RATE]) {
struct ifla_vf_rate *ivt = nla_data(tb[IFLA_VF_RATE]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivt->vf >= INT_MAX)
return -EINVAL;
err = rtnl_set_vf_rate(dev, ivt->vf,
ivt->min_tx_rate, ivt->max_tx_rate);
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (err < 0)
return err;
}
if (tb[IFLA_VF_SPOOFCHK]) {
struct ifla_vf_spoofchk *ivs = nla_data(tb[IFLA_VF_SPOOFCHK]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivs->vf >= INT_MAX)
return -EINVAL;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_spoofchk)
err = ops->ndo_set_vf_spoofchk(dev, ivs->vf,
ivs->setting);
if (err < 0)
return err;
}
if (tb[IFLA_VF_LINK_STATE]) {
struct ifla_vf_link_state *ivl = nla_data(tb[IFLA_VF_LINK_STATE]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivl->vf >= INT_MAX)
return -EINVAL;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_link_state)
err = ops->ndo_set_vf_link_state(dev, ivl->vf,
ivl->link_state);
if (err < 0)
return err;
}
if (tb[IFLA_VF_RSS_QUERY_EN]) {
struct ifla_vf_rss_query_en *ivrssq_en;
err = -EOPNOTSUPP;
ivrssq_en = nla_data(tb[IFLA_VF_RSS_QUERY_EN]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivrssq_en->vf >= INT_MAX)
return -EINVAL;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (ops->ndo_set_vf_rss_query_en)
err = ops->ndo_set_vf_rss_query_en(dev, ivrssq_en->vf,
ivrssq_en->setting);
if (err < 0)
return err;
}
if (tb[IFLA_VF_TRUST]) {
struct ifla_vf_trust *ivt = nla_data(tb[IFLA_VF_TRUST]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivt->vf >= INT_MAX)
return -EINVAL;
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_trust)
err = ops->ndo_set_vf_trust(dev, ivt->vf, ivt->setting);
if (err < 0)
return err;
}
if (tb[IFLA_VF_IB_NODE_GUID]) {
struct ifla_vf_guid *ivt = nla_data(tb[IFLA_VF_IB_NODE_GUID]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivt->vf >= INT_MAX)
return -EINVAL;
if (!ops->ndo_set_vf_guid)
return -EOPNOTSUPP;
return handle_vf_guid(dev, ivt, IFLA_VF_IB_NODE_GUID);
}
if (tb[IFLA_VF_IB_PORT_GUID]) {
struct ifla_vf_guid *ivt = nla_data(tb[IFLA_VF_IB_PORT_GUID]);
net: rtnetlink: prevent underflows in do_setvfinfo() The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20 12:34:38 +00:00
if (ivt->vf >= INT_MAX)
return -EINVAL;
if (!ops->ndo_set_vf_guid)
return -EOPNOTSUPP;
return handle_vf_guid(dev, ivt, IFLA_VF_IB_PORT_GUID);
}
return err;
}
static int do_set_master(struct net_device *dev, int ifindex,
struct netlink_ext_ack *extack)
{
struct net_device *upper_dev = netdev_master_upper_dev_get(dev);
const struct net_device_ops *ops;
int err;
if (upper_dev) {
if (upper_dev->ifindex == ifindex)
return 0;
ops = upper_dev->netdev_ops;
if (ops->ndo_del_slave) {
err = ops->ndo_del_slave(upper_dev, dev);
if (err)
return err;
} else {
return -EOPNOTSUPP;
}
}
if (ifindex) {
upper_dev = __dev_get_by_index(dev_net(dev), ifindex);
if (!upper_dev)
return -EINVAL;
ops = upper_dev->netdev_ops;
if (ops->ndo_add_slave) {
err = ops->ndo_add_slave(upper_dev, dev, extack);
if (err)
return err;
} else {
return -EOPNOTSUPP;
}
}
return 0;
}
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
static const struct nla_policy ifla_proto_down_reason_policy[IFLA_PROTO_DOWN_REASON_VALUE + 1] = {
[IFLA_PROTO_DOWN_REASON_MASK] = { .type = NLA_U32 },
[IFLA_PROTO_DOWN_REASON_VALUE] = { .type = NLA_U32 },
};
static int do_set_proto_down(struct net_device *dev,
struct nlattr *nl_proto_down,
struct nlattr *nl_proto_down_reason,
struct netlink_ext_ack *extack)
{
struct nlattr *pdreason[IFLA_PROTO_DOWN_REASON_MAX + 1];
unsigned long mask = 0;
u32 value;
bool proto_down;
int err;
if (!(dev->priv_flags & IFF_CHANGE_PROTO_DOWN)) {
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
NL_SET_ERR_MSG(extack, "Protodown not supported by device");
return -EOPNOTSUPP;
}
if (nl_proto_down_reason) {
err = nla_parse_nested_deprecated(pdreason,
IFLA_PROTO_DOWN_REASON_MAX,
nl_proto_down_reason,
ifla_proto_down_reason_policy,
NULL);
if (err < 0)
return err;
if (!pdreason[IFLA_PROTO_DOWN_REASON_VALUE]) {
NL_SET_ERR_MSG(extack, "Invalid protodown reason value");
return -EINVAL;
}
value = nla_get_u32(pdreason[IFLA_PROTO_DOWN_REASON_VALUE]);
if (pdreason[IFLA_PROTO_DOWN_REASON_MASK])
mask = nla_get_u32(pdreason[IFLA_PROTO_DOWN_REASON_MASK]);
dev_change_proto_down_reason(dev, mask, value);
}
if (nl_proto_down) {
proto_down = nla_get_u8(nl_proto_down);
/* Don't turn off protodown if there are active reasons */
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
if (!proto_down && dev->proto_down_reason) {
NL_SET_ERR_MSG(extack, "Cannot clear protodown, active reasons");
return -EBUSY;
}
err = dev_change_proto_down(dev,
proto_down);
if (err)
return err;
}
return 0;
}
#define DO_SETLINK_MODIFIED 0x01
/* notify flag means notify + modified. */
#define DO_SETLINK_NOTIFY 0x03
static int do_setlink(const struct sk_buff *skb,
struct net_device *dev, struct ifinfomsg *ifm,
struct netlink_ext_ack *extack,
struct nlattr **tb, int status)
{
const struct net_device_ops *ops = dev->netdev_ops;
char ifname[IFNAMSIZ];
int err;
if (tb[IFLA_IFNAME])
nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
else
ifname[0] = '\0';
if (tb[IFLA_NET_NS_PID] || tb[IFLA_NET_NS_FD] || tb[IFLA_TARGET_NETNSID]) {
const char *pat = ifname[0] ? ifname : NULL;
struct net *net;
int new_ifindex;
net = rtnl_link_get_net_capable(skb, dev_net(dev),
tb, CAP_NET_ADMIN);
if (IS_ERR(net)) {
err = PTR_ERR(net);
goto errout;
}
if (tb[IFLA_NEW_IFINDEX])
new_ifindex = nla_get_s32(tb[IFLA_NEW_IFINDEX]);
else
new_ifindex = 0;
rtnetlink: Return correct error on changing device netns Currently when device is moved between network namespaces using RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID, IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and target namespace already has device with same name, userspace will get EINVAL what is confusing and makes debugging harder. Fix it so that userspace gets more appropriate EEXIST instead what makes debugging much easier. Before: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: Invalid argument After: # ./ifname.sh + ip netns add ns0 + ip netns exec ns0 ip link add l0 type dummy + ip netns exec ns0 ip link show l0 8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff + ip link add l0 type dummy + ip link show l0 10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff + ip link set l0 netns ns0 RTNETLINK answers: File exists The problem is that do_setlink() passes its `char *ifname` argument, that it gets from a caller, to __dev_change_net_namespace() as is (as `const char *pat`), but semantics of ifname and pat can be different. For example, __rtnl_newlink() does this: net/core/rtnetlink.c 3270 char ifname[IFNAMSIZ]; ... 3286 if (tb[IFLA_IFNAME]) 3287 nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ); 3288 else 3289 ifname[0] = '\0'; ... 3364 if (dev) { ... 3394 return do_setlink(skb, dev, ifm, extack, tb, ifname, status); 3395 } , i.e. do_setlink() gets ifname pointer that is always valid no matter if user specified IFLA_IFNAME or not and then do_setlink() passes this ifname pointer as is to __dev_change_net_namespace() as pat argument. But the pat (pattern) in __dev_change_net_namespace() is used as: net/core/dev.c 11198 err = -EEXIST; 11199 if (__dev_get_by_name(net, dev->name)) { 11200 /* We get here if we can't use the current device name */ 11201 if (!pat) 11202 goto out; 11203 err = dev_get_valid_name(net, dev, pat); 11204 if (err < 0) 11205 goto out; 11206 } As the result the `goto out` path on line 11202 is neven taken and instead of returning EEXIST defined on line 11198, __dev_change_net_namespace() returns an error from dev_get_valid_name() and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier. Fixes: d8a5ec672768 ("[NET]: netlink support for moving devices between network namespaces.") Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26 00:25:40 +00:00
err = __dev_change_net_namespace(dev, net, pat, new_ifindex);
put_net(net);
if (err)
goto errout;
status |= DO_SETLINK_MODIFIED;
}
if (tb[IFLA_MAP]) {
struct rtnl_link_ifmap *u_map;
struct ifmap k_map;
if (!ops->ndo_set_config) {
err = -EOPNOTSUPP;
goto errout;
}
if (!netif_device_present(dev)) {
err = -ENODEV;
goto errout;
}
u_map = nla_data(tb[IFLA_MAP]);
k_map.mem_start = (unsigned long) u_map->mem_start;
k_map.mem_end = (unsigned long) u_map->mem_end;
k_map.base_addr = (unsigned short) u_map->base_addr;
k_map.irq = (unsigned char) u_map->irq;
k_map.dma = (unsigned char) u_map->dma;
k_map.port = (unsigned char) u_map->port;
err = ops->ndo_set_config(dev, &k_map);
if (err < 0)
goto errout;
status |= DO_SETLINK_NOTIFY;
}
if (tb[IFLA_ADDRESS]) {
struct sockaddr *sa;
int len;
len = sizeof(sa_family_t) + max_t(size_t, dev->addr_len,
sizeof(*sa));
sa = kmalloc(len, GFP_KERNEL);
if (!sa) {
err = -ENOMEM;
goto errout;
}
sa->sa_family = dev->type;
memcpy(sa->sa_data, nla_data(tb[IFLA_ADDRESS]),
dev->addr_len);
err = dev_set_mac_address_user(dev, sa, extack);
kfree(sa);
if (err)
goto errout;
status |= DO_SETLINK_MODIFIED;
}
if (tb[IFLA_MTU]) {
err = dev_set_mtu_ext(dev, nla_get_u32(tb[IFLA_MTU]), extack);
if (err < 0)
goto errout;
status |= DO_SETLINK_MODIFIED;
}
if (tb[IFLA_GROUP]) {
dev_set_group(dev, nla_get_u32(tb[IFLA_GROUP]));
status |= DO_SETLINK_NOTIFY;
}
/*
* Interface selected by interface index but interface
* name provided implies that a name change has been
* requested.
*/
if (ifm->ifi_index > 0 && ifname[0]) {
err = dev_change_name(dev, ifname);
if (err < 0)
goto errout;
status |= DO_SETLINK_MODIFIED;
}
if (tb[IFLA_IFALIAS]) {
err = dev_set_alias(dev, nla_data(tb[IFLA_IFALIAS]),
nla_len(tb[IFLA_IFALIAS]));
if (err < 0)
goto errout;
status |= DO_SETLINK_NOTIFY;
}
if (tb[IFLA_BROADCAST]) {
nla_memcpy(dev->broadcast, tb[IFLA_BROADCAST], dev->addr_len);
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
}
if (tb[IFLA_MASTER]) {
err = do_set_master(dev, nla_get_u32(tb[IFLA_MASTER]), extack);
if (err)
goto errout;
status |= DO_SETLINK_MODIFIED;
}
if (ifm->ifi_flags || ifm->ifi_change) {
err = dev_change_flags(dev, rtnl_dev_combine_flags(dev, ifm),
extack);
if (err < 0)
goto errout;
}
if (tb[IFLA_CARRIER]) {
err = dev_change_carrier(dev, nla_get_u8(tb[IFLA_CARRIER]));
if (err)
goto errout;
status |= DO_SETLINK_MODIFIED;
}
if (tb[IFLA_TXQLEN]) {
unsigned int value = nla_get_u32(tb[IFLA_TXQLEN]);
err = dev_change_tx_queue_len(dev, value);
if (err)
goto errout;
status |= DO_SETLINK_MODIFIED;
}
if (tb[IFLA_GSO_MAX_SIZE]) {
u32 max_size = nla_get_u32(tb[IFLA_GSO_MAX_SIZE]);
if (dev->gso_max_size ^ max_size) {
netif_set_gso_max_size(dev, max_size);
status |= DO_SETLINK_MODIFIED;
}
}
if (tb[IFLA_GSO_MAX_SEGS]) {
u32 max_segs = nla_get_u32(tb[IFLA_GSO_MAX_SEGS]);
if (dev->gso_max_segs ^ max_segs) {
netif_set_gso_max_segs(dev, max_segs);
status |= DO_SETLINK_MODIFIED;
}
}
if (tb[IFLA_GRO_MAX_SIZE]) {
u32 gro_max_size = nla_get_u32(tb[IFLA_GRO_MAX_SIZE]);
if (dev->gro_max_size ^ gro_max_size) {
netif_set_gro_max_size(dev, gro_max_size);
status |= DO_SETLINK_MODIFIED;
}
}
if (tb[IFLA_GSO_IPV4_MAX_SIZE]) {
u32 max_size = nla_get_u32(tb[IFLA_GSO_IPV4_MAX_SIZE]);
if (dev->gso_ipv4_max_size ^ max_size) {
netif_set_gso_ipv4_max_size(dev, max_size);
status |= DO_SETLINK_MODIFIED;
}
}
if (tb[IFLA_GRO_IPV4_MAX_SIZE]) {
u32 gro_max_size = nla_get_u32(tb[IFLA_GRO_IPV4_MAX_SIZE]);
if (dev->gro_ipv4_max_size ^ gro_max_size) {
netif_set_gro_ipv4_max_size(dev, gro_max_size);
status |= DO_SETLINK_MODIFIED;
}
}
if (tb[IFLA_OPERSTATE])
set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]));
if (tb[IFLA_LINKMODE]) {
unsigned char value = nla_get_u8(tb[IFLA_LINKMODE]);
write_lock(&dev_base_lock);
if (dev->link_mode ^ value)
status |= DO_SETLINK_NOTIFY;
dev->link_mode = value;
write_unlock(&dev_base_lock);
}
if (tb[IFLA_VFINFO_LIST]) {
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
struct nlattr *vfinfo[IFLA_VF_MAX + 1];
struct nlattr *attr;
int rem;
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
nla_for_each_nested(attr, tb[IFLA_VFINFO_LIST], rem) {
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (nla_type(attr) != IFLA_VF_INFO ||
nla_len(attr) < NLA_HDRLEN) {
err = -EINVAL;
goto errout;
}
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nla_parse_nested_deprecated(vfinfo, IFLA_VF_MAX,
attr,
ifla_vf_policy,
NULL);
rtnetlink: verify IFLA_VF_INFO attributes before passing them to driver Jason Gunthorpe reported that since commit c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes anymore with respect to their policy, that is, ifla_vfinfo_policy[]. Before, they were part of ifla_policy[], but they have been nested since placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO, which is another nested attribute for the actual VF attributes such as IFLA_VF_MAC, IFLA_VF_VLAN, etc. Despite the policy being split out from ifla_policy[] in this commit, it's never applied anywhere. nla_for_each_nested() only does basic nla_ok() testing for struct nlattr, but it doesn't know about the data context and their requirements. Fix, on top of Jason's initial work, does 1) parsing of the attributes with the right policy, and 2) using the resulting parsed attribute table from 1) instead of the nla_for_each_nested() loop (just like we used to do when still part of ifla_policy[]). Reference: http://thread.gmane.org/gmane.linux.network/368913 Fixes: c02db8c6290b ("rtnetlink: make SR-IOV VF interface symmetric") Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Rony Efraim <ronye@mellanox.com> Cc: Vlad Zolotarov <vladz@cloudius-systems.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-06 22:07:52 +00:00
if (err < 0)
goto errout;
err = do_setvfinfo(dev, vfinfo);
if (err < 0)
goto errout;
status |= DO_SETLINK_NOTIFY;
}
}
err = 0;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
if (tb[IFLA_VF_PORTS]) {
struct nlattr *port[IFLA_PORT_MAX+1];
struct nlattr *attr;
int vf;
int rem;
err = -EOPNOTSUPP;
if (!ops->ndo_set_vf_port)
goto errout;
nla_for_each_nested(attr, tb[IFLA_VF_PORTS], rem) {
if (nla_type(attr) != IFLA_VF_PORT ||
nla_len(attr) < NLA_HDRLEN) {
err = -EINVAL;
goto errout;
}
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nla_parse_nested_deprecated(port, IFLA_PORT_MAX,
attr,
ifla_port_policy,
NULL);
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
if (err < 0)
goto errout;
if (!port[IFLA_PORT_VF]) {
err = -EOPNOTSUPP;
goto errout;
}
vf = nla_get_u32(port[IFLA_PORT_VF]);
err = ops->ndo_set_vf_port(dev, vf, port);
if (err < 0)
goto errout;
status |= DO_SETLINK_NOTIFY;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
}
}
err = 0;
if (tb[IFLA_PORT_SELF]) {
struct nlattr *port[IFLA_PORT_MAX+1];
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nla_parse_nested_deprecated(port, IFLA_PORT_MAX,
tb[IFLA_PORT_SELF],
ifla_port_policy, NULL);
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
if (err < 0)
goto errout;
err = -EOPNOTSUPP;
if (ops->ndo_set_vf_port)
err = ops->ndo_set_vf_port(dev, PORT_SELF_VF, port);
if (err < 0)
goto errout;
status |= DO_SETLINK_NOTIFY;
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
}
if (tb[IFLA_AF_SPEC]) {
struct nlattr *af;
int rem;
nla_for_each_nested(af, tb[IFLA_AF_SPEC], rem) {
const struct rtnl_af_ops *af_ops;
BUG_ON(!(af_ops = rtnl_af_lookup(nla_type(af))));
err = af_ops->set_link_af(dev, af, extack);
if (err < 0)
goto errout;
status |= DO_SETLINK_NOTIFY;
}
}
net: Add netlink support for virtual port management (was iovnl) Add new netdev ops ndo_{set|get}_vf_port to allow setting of port-profile on a netdev interface. Extends netlink socket RTM_SETLINK/ RTM_GETLINK with two new sub msgs called IFLA_VF_PORTS and IFLA_PORT_SELF (added to end of IFLA_cmd list). These are both nested atrtibutes using this layout: [IFLA_NUM_VF] [IFLA_VF_PORTS] [IFLA_VF_PORT] [IFLA_PORT_*], ... [IFLA_VF_PORT] [IFLA_PORT_*], ... ... [IFLA_PORT_SELF] [IFLA_PORT_*], ... These attributes are design to be set and get symmetrically. VF_PORTS is a list of VF_PORTs, one for each VF, when dealing with an SR-IOV device. PORT_SELF is for the PF of the SR-IOV device, in case it wants to also have a port-profile, or for the case where the VF==PF, like in enic patch 2/2 of this patch set. A port-profile is used to configure/enable the external switch virtual port backing the netdev interface, not to configure the host-facing side of the netdev. A port-profile is an identifier known to the switch. How port- profiles are installed on the switch or how available port-profiles are made know to the host is outside the scope of this patch. There are two types of port-profiles specs in the netlink msg. The first spec is for 802.1Qbg (pre-)standard, VDP protocol. The second spec is for devices that run a similar protocol as VDP but in firmware, thus hiding the protocol details. In either case, the specs have much in common and makes sense to define the netlink msg as the union of the two specs. For example, both specs have a notition of associating/deassociating a port-profile. And both specs require some information from the hypervisor manager, such as client port instance ID. The general flow is the port-profile is applied to a host netdev interface using RTM_SETLINK, the receiver of the RTM_SETLINK msg communicates with the switch, and the switch virtual port backing the host netdev interface is configured/enabled based on the settings defined by the port-profile. What those settings comprise, and how those settings are managed is again outside the scope of this patch, since this patch only deals with the first step in the flow. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 05:49:55 +00:00
err = 0;
rtnetlink: add support for protodown reason netdev protodown is a mechanism that allows protocols to hold an interface down. It was initially introduced in the kernel to hold links down by a multihoming protocol. There was also an attempt to introduce protodown reason at the time but was rejected. protodown and protodown reason is supported by almost every switching and routing platform. It was ok for a while to live without a protodown reason. But, its become more critical now given more than one protocol may need to keep a link down on a system at the same time. eg: vrrp peer node, port security, multihoming protocol. Its common for Network operators and protocol developers to look for such a reason on a networking box (Its also known as errDisable by most networking operators) This patch adds support for link protodown reason attribute. There are two ways to maintain protodown reasons. (a) enumerate every possible reason code in kernel - A protocol developer has to make a request and have that appear in a certain kernel version (b) provide the bits in the kernel, and allow user-space (sysadmin or NOS distributions) to manage the bit-to-reasonname map. - This makes extending reason codes easier (kind of like the iproute2 table to vrf-name map /etc/iproute2/rt_tables.d/) This patch takes approach (b). a few things about the patch: - It treats the protodown reason bits as counter to indicate active protodown users - Since protodown attribute is already an exposed UAPI, the reason is not enforced on a protodown set. Its a no-op if not used. the patch follows the below algorithm: - presence of reason bits set indicates protodown is in use - user can set protodown and protodown reason in a single or multiple setlink operations - setlink operation to clear protodown, will return -EBUSY if there are active protodown reason bits - reason is not included in link dumps if not used example with patched iproute2: $cat /etc/iproute2/protodown_reasons.d/r.conf 0 mlag 1 evpn 2 vrrp 3 psecurity $ip link set dev vxlan0 protodown on protodown_reason vrrp on $ip link set dev vxlan0 protodown_reason mlag on $ip link show 14: vxlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether f6:06:be:17:91:e7 brd ff:ff:ff:ff:ff:ff protodown on <mlag,vrrp> $ip link set dev vxlan0 protodown_reason mlag off $ip link set dev vxlan0 protodown off protodown_reason vrrp off Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-01 00:34:01 +00:00
if (tb[IFLA_PROTO_DOWN] || tb[IFLA_PROTO_DOWN_REASON]) {
err = do_set_proto_down(dev, tb[IFLA_PROTO_DOWN],
tb[IFLA_PROTO_DOWN_REASON], extack);
if (err)
goto errout;
status |= DO_SETLINK_NOTIFY;
}
if (tb[IFLA_XDP]) {
struct nlattr *xdp[IFLA_XDP_MAX + 1];
u32 xdp_flags = 0;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nla_parse_nested_deprecated(xdp, IFLA_XDP_MAX,
tb[IFLA_XDP],
ifla_xdp_policy, NULL);
if (err < 0)
goto errout;
if (xdp[IFLA_XDP_ATTACHED] || xdp[IFLA_XDP_PROG_ID]) {
err = -EINVAL;
goto errout;
}
if (xdp[IFLA_XDP_FLAGS]) {
xdp_flags = nla_get_u32(xdp[IFLA_XDP_FLAGS]);
if (xdp_flags & ~XDP_FLAGS_MASK) {
err = -EINVAL;
goto errout;
}
if (hweight32(xdp_flags & XDP_FLAGS_MODES) > 1) {
err = -EINVAL;
goto errout;
}
}
if (xdp[IFLA_XDP_FD]) {
int expected_fd = -1;
if (xdp_flags & XDP_FLAGS_REPLACE) {
if (!xdp[IFLA_XDP_EXPECTED_FD]) {
err = -EINVAL;
goto errout;
}
expected_fd =
nla_get_s32(xdp[IFLA_XDP_EXPECTED_FD]);
}
err = dev_change_xdp_fd(dev, extack,
nla_get_s32(xdp[IFLA_XDP_FD]),
expected_fd,
xdp_flags);
if (err)
goto errout;
status |= DO_SETLINK_NOTIFY;
}
}
errout:
if (status & DO_SETLINK_MODIFIED) {
if ((status & DO_SETLINK_NOTIFY) == DO_SETLINK_NOTIFY)
netdev_state_change(dev);
if (err < 0)
net_warn_ratelimited("A link change request failed with some changes committed already. Interface %s may have been left with an inconsistent configuration, please check.\n",
dev->name);
}
return err;
}
static struct net_device *rtnl_dev_get(struct net *net,
struct nlattr *tb[])
{
char ifname[ALTIFNAMSIZ];
if (tb[IFLA_IFNAME])
nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
else if (tb[IFLA_ALT_IFNAME])
nla_strscpy(ifname, tb[IFLA_ALT_IFNAME], ALTIFNAMSIZ);
else
return NULL;
return __dev_get_by_name(net, ifname);
}
static int rtnl_setlink(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
struct ifinfomsg *ifm;
struct net_device *dev;
int err;
struct nlattr *tb[IFLA_MAX+1];
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFLA_MAX,
ifla_policy, extack);
if (err < 0)
goto errout;
err = rtnl_ensure_unique_netns(tb, extack, false);
if (err < 0)
goto errout;
err = -EINVAL;
ifm = nlmsg_data(nlh);
if (ifm->ifi_index > 0)
dev = __dev_get_by_index(net, ifm->ifi_index);
else if (tb[IFLA_IFNAME] || tb[IFLA_ALT_IFNAME])
dev = rtnl_dev_get(net, tb);
else
goto errout;
if (dev == NULL) {
err = -ENODEV;
goto errout;
}
err = validate_linkmsg(dev, tb, extack);
if (err < 0)
goto errout;
err = do_setlink(skb, dev, ifm, extack, tb, 0);
errout:
return err;
}
static int rtnl_group_dellink(const struct net *net, int group)
{
struct net_device *dev, *aux;
LIST_HEAD(list_kill);
bool found = false;
if (!group)
return -EPERM;
for_each_netdev(net, dev) {
if (dev->group == group) {
const struct rtnl_link_ops *ops;
found = true;
ops = dev->rtnl_link_ops;
if (!ops || !ops->dellink)
return -EOPNOTSUPP;
}
}
if (!found)
return -ENODEV;
for_each_netdev_safe(net, dev, aux) {
if (dev->group == group) {
const struct rtnl_link_ops *ops;
ops = dev->rtnl_link_ops;
ops->dellink(dev, &list_kill);
}
}
unregister_netdevice_many(&list_kill);
return 0;
}
int rtnl_delete_link(struct net_device *dev, u32 portid, const struct nlmsghdr *nlh)
{
const struct rtnl_link_ops *ops;
LIST_HEAD(list_kill);
ops = dev->rtnl_link_ops;
if (!ops || !ops->dellink)
return -EOPNOTSUPP;
ops->dellink(dev, &list_kill);
unregister_netdevice_many_notify(&list_kill, portid, nlh);
return 0;
}
EXPORT_SYMBOL_GPL(rtnl_delete_link);
static int rtnl_dellink(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
u32 portid = NETLINK_CB(skb).portid;
struct net *tgt_net = net;
struct net_device *dev = NULL;
struct ifinfomsg *ifm;
struct nlattr *tb[IFLA_MAX+1];
int err;
int netnsid = -1;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFLA_MAX,
ifla_policy, extack);
if (err < 0)
return err;
err = rtnl_ensure_unique_netns(tb, extack, true);
if (err < 0)
return err;
if (tb[IFLA_TARGET_NETNSID]) {
netnsid = nla_get_s32(tb[IFLA_TARGET_NETNSID]);
tgt_net = rtnl_get_net_ns_capable(NETLINK_CB(skb).sk, netnsid);
if (IS_ERR(tgt_net))
return PTR_ERR(tgt_net);
}
err = -EINVAL;
ifm = nlmsg_data(nlh);
if (ifm->ifi_index > 0)
dev = __dev_get_by_index(tgt_net, ifm->ifi_index);
else if (tb[IFLA_IFNAME] || tb[IFLA_ALT_IFNAME])
dev = rtnl_dev_get(net, tb);
else if (tb[IFLA_GROUP])
err = rtnl_group_dellink(tgt_net, nla_get_u32(tb[IFLA_GROUP]));
else
goto out;
if (!dev) {
if (tb[IFLA_IFNAME] || tb[IFLA_ALT_IFNAME] || ifm->ifi_index > 0)
err = -ENODEV;
goto out;
}
err = rtnl_delete_link(dev, portid, nlh);
out:
if (netnsid >= 0)
put_net(tgt_net);
return err;
}
int rtnl_configure_link(struct net_device *dev, const struct ifinfomsg *ifm,
u32 portid, const struct nlmsghdr *nlh)
rtnetlink: support specifying device flags on device creation commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 06:34:54 +00:00
{
unsigned int old_flags;
int err;
old_flags = dev->flags;
if (ifm && (ifm->ifi_flags || ifm->ifi_change)) {
err = __dev_change_flags(dev, rtnl_dev_combine_flags(dev, ifm),
NULL);
rtnetlink: support specifying device flags on device creation commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 06:34:54 +00:00
if (err < 0)
return err;
}
if (dev->rtnl_link_state == RTNL_LINK_INITIALIZED) {
__dev_notify_flags(dev, old_flags, (old_flags ^ dev->flags), portid, nlh);
} else {
dev->rtnl_link_state = RTNL_LINK_INITIALIZED;
__dev_notify_flags(dev, old_flags, ~0U, portid, nlh);
}
rtnetlink: support specifying device flags on device creation commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 06:34:54 +00:00
return 0;
}
EXPORT_SYMBOL(rtnl_configure_link);
struct net_device *rtnl_create_link(struct net *net, const char *ifname,
unsigned char name_assign_type,
const struct rtnl_link_ops *ops,
struct nlattr *tb[],
struct netlink_ext_ack *extack)
{
struct net_device *dev;
unsigned int num_tx_queues = 1;
unsigned int num_rx_queues = 1;
int err;
if (tb[IFLA_NUM_TX_QUEUES])
num_tx_queues = nla_get_u32(tb[IFLA_NUM_TX_QUEUES]);
else if (ops->get_num_tx_queues)
num_tx_queues = ops->get_num_tx_queues();
if (tb[IFLA_NUM_RX_QUEUES])
num_rx_queues = nla_get_u32(tb[IFLA_NUM_RX_QUEUES]);
else if (ops->get_num_rx_queues)
num_rx_queues = ops->get_num_rx_queues();
if (num_tx_queues < 1 || num_tx_queues > 4096) {
NL_SET_ERR_MSG(extack, "Invalid number of transmit queues");
return ERR_PTR(-EINVAL);
}
if (num_rx_queues < 1 || num_rx_queues > 4096) {
NL_SET_ERR_MSG(extack, "Invalid number of receive queues");
return ERR_PTR(-EINVAL);
}
if (ops->alloc) {
dev = ops->alloc(tb, ifname, name_assign_type,
num_tx_queues, num_rx_queues);
if (IS_ERR(dev))
return dev;
} else {
dev = alloc_netdev_mqs(ops->priv_size, ifname,
name_assign_type, ops->setup,
num_tx_queues, num_rx_queues);
}
if (!dev)
return ERR_PTR(-ENOMEM);
err = validate_linkmsg(dev, tb, extack);
if (err < 0) {
free_netdev(dev);
return ERR_PTR(err);
}
dev_net_set(dev, net);
dev->rtnl_link_ops = ops;
rtnetlink: support specifying device flags on device creation commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26 06:34:54 +00:00
dev->rtnl_link_state = RTNL_LINK_INITIALIZING;
net: rtnetlink: validate IFLA_MTU attribute in rtnl_create_link() rtnl_create_link() needs to apply dev->min_mtu and dev->max_mtu checks that we apply in do_setlink() Otherwise malicious users can crash the kernel, for example after an integer overflow : BUG: KASAN: use-after-free in memset include/linux/string.h:365 [inline] BUG: KASAN: use-after-free in __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238 Write of size 32 at addr ffff88819f20b9c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x134/0x1a0 mm/kasan/generic.c:192 memset+0x24/0x40 mm/kasan/common.c:108 memset include/linux/string.h:365 [inline] __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238 alloc_skb include/linux/skbuff.h:1049 [inline] alloc_skb_with_frags+0x93/0x590 net/core/skbuff.c:5664 sock_alloc_send_pskb+0x7ad/0x920 net/core/sock.c:2242 sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2259 mld_newpack+0x1d7/0x7f0 net/ipv6/mcast.c:1609 add_grhead.isra.0+0x299/0x370 net/ipv6/mcast.c:1713 add_grec+0x7db/0x10b0 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:1970 [inline] mld_ifc_timer_expire+0x3d3/0x950 net/ipv6/mcast.c:2477 call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786 __do_softirq+0x262/0x98c kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x19b/0x1e0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61 Code: 98 6b ea f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 44 1c 60 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 34 1c 60 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 4e 5d 9a f9 e8 79 RSP: 0018:ffffffff89807ce8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff13266ae RBX: ffffffff8987a1c0 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffffffff8987aa54 RBP: ffffffff89807d18 R08: ffffffff8987a1c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffffffff8a799980 R14: 0000000000000000 R15: 0000000000000000 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:690 default_idle_call+0x84/0xb0 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361 rest_init+0x23b/0x371 init/main.c:451 arch_call_rest_init+0xe/0x1b start_kernel+0x904/0x943 init/main.c:784 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x77/0x7b arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242 The buggy address belongs to the page: page:ffffea00067c82c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 057ffe0000000000 ffffea00067c82c8 ffffea00067c82c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88819f20b880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88819f20b900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88819f20b980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88819f20ba00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88819f20ba80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22 06:47:29 +00:00
if (tb[IFLA_MTU]) {
u32 mtu = nla_get_u32(tb[IFLA_MTU]);
err = dev_validate_mtu(dev, mtu, extack);
if (err) {
free_netdev(dev);
return ERR_PTR(err);
}
dev->mtu = mtu;
}
if (tb[IFLA_ADDRESS]) {
__dev_addr_set(dev, nla_data(tb[IFLA_ADDRESS]),
nla_len(tb[IFLA_ADDRESS]));
dev->addr_assign_type = NET_ADDR_SET;
}
if (tb[IFLA_BROADCAST])
memcpy(dev->broadcast, nla_data(tb[IFLA_BROADCAST]),
nla_len(tb[IFLA_BROADCAST]));
if (tb[IFLA_TXQLEN])
dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]);
if (tb[IFLA_OPERSTATE])
set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]));
if (tb[IFLA_LINKMODE])
dev->link_mode = nla_get_u8(tb[IFLA_LINKMODE]);
if (tb[IFLA_GROUP])
dev_set_group(dev, nla_get_u32(tb[IFLA_GROUP]));
if (tb[IFLA_GSO_MAX_SIZE])
netif_set_gso_max_size(dev, nla_get_u32(tb[IFLA_GSO_MAX_SIZE]));
if (tb[IFLA_GSO_MAX_SEGS])
netif_set_gso_max_segs(dev, nla_get_u32(tb[IFLA_GSO_MAX_SEGS]));
if (tb[IFLA_GRO_MAX_SIZE])
netif_set_gro_max_size(dev, nla_get_u32(tb[IFLA_GRO_MAX_SIZE]));
if (tb[IFLA_GSO_IPV4_MAX_SIZE])
netif_set_gso_ipv4_max_size(dev, nla_get_u32(tb[IFLA_GSO_IPV4_MAX_SIZE]));
if (tb[IFLA_GRO_IPV4_MAX_SIZE])
netif_set_gro_ipv4_max_size(dev, nla_get_u32(tb[IFLA_GRO_IPV4_MAX_SIZE]));
return dev;
}
EXPORT_SYMBOL(rtnl_create_link);
static int rtnl_group_changelink(const struct sk_buff *skb,
struct net *net, int group,
struct ifinfomsg *ifm,
struct netlink_ext_ack *extack,
struct nlattr **tb)
{
net: use for_each_netdev_safe() in rtnl_group_changelink() In case we move the whole dev group to another netns, we should call for_each_netdev_safe(), otherwise we get a soft lockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798] irq event stamp: 255424 hardirqs last enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000 RIP: 0010:[<ffffffff810cad11>] [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30 RSP: 0018:ffff880119533778 EFLAGS: 00000246 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40 FS: 00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0 Stack: ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828 ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0 0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7 Call Trace: [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f [<ffffffff811ac8c9>] __fget+0x2a/0x7a [<ffffffff811ad2d7>] fget+0x13/0x15 [<ffffffff811be732>] proc_ns_fget+0xe/0x38 [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59 [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e [<ffffffff817df3d7>] do_setlink+0x73/0x87b [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699 [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699 [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33 [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a [<ffffffff8107da51>] ? ns_capable+0x4d/0x65 [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17 [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d [<ffffffff81830f18>] netlink_unicast+0xcb/0x150 [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523 [<ffffffff8115cba9>] ? might_fault+0x59/0xa9 [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255 [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac946>] ? __fget_light+0x2d/0x52 [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60 [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17 Fixes: e7ed828f10bd8 ("netlink: support setting devgroup parameters") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 23:31:09 +00:00
struct net_device *dev, *aux;
int err;
net: use for_each_netdev_safe() in rtnl_group_changelink() In case we move the whole dev group to another netns, we should call for_each_netdev_safe(), otherwise we get a soft lockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798] irq event stamp: 255424 hardirqs last enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000 RIP: 0010:[<ffffffff810cad11>] [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30 RSP: 0018:ffff880119533778 EFLAGS: 00000246 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40 FS: 00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0 Stack: ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828 ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0 0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7 Call Trace: [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f [<ffffffff811ac8c9>] __fget+0x2a/0x7a [<ffffffff811ad2d7>] fget+0x13/0x15 [<ffffffff811be732>] proc_ns_fget+0xe/0x38 [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59 [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e [<ffffffff817df3d7>] do_setlink+0x73/0x87b [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699 [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699 [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33 [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a [<ffffffff8107da51>] ? ns_capable+0x4d/0x65 [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17 [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d [<ffffffff81830f18>] netlink_unicast+0xcb/0x150 [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523 [<ffffffff8115cba9>] ? might_fault+0x59/0xa9 [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255 [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac946>] ? __fget_light+0x2d/0x52 [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60 [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17 Fixes: e7ed828f10bd8 ("netlink: support setting devgroup parameters") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23 23:31:09 +00:00
for_each_netdev_safe(net, dev, aux) {
if (dev->group == group) {
err = validate_linkmsg(dev, tb, extack);
if (err < 0)
return err;
err = do_setlink(skb, dev, ifm, extack, tb, 0);
if (err < 0)
return err;
}
}
return 0;
}
static int rtnl_newlink_create(struct sk_buff *skb, struct ifinfomsg *ifm,
const struct rtnl_link_ops *ops,
const struct nlmsghdr *nlh,
struct nlattr **tb, struct nlattr **data,
struct netlink_ext_ack *extack)
{
unsigned char name_assign_type = NET_NAME_USER;
struct net *net = sock_net(skb->sk);
u32 portid = NETLINK_CB(skb).portid;
struct net *dest_net, *link_net;
struct net_device *dev;
char ifname[IFNAMSIZ];
int err;
if (!ops->alloc && !ops->setup)
return -EOPNOTSUPP;
if (tb[IFLA_IFNAME]) {
nla_strscpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
} else {
snprintf(ifname, IFNAMSIZ, "%s%%d", ops->kind);
name_assign_type = NET_NAME_ENUM;
}
dest_net = rtnl_link_get_net_capable(skb, net, tb, CAP_NET_ADMIN);
if (IS_ERR(dest_net))
return PTR_ERR(dest_net);
if (tb[IFLA_LINK_NETNSID]) {
int id = nla_get_s32(tb[IFLA_LINK_NETNSID]);
link_net = get_net_ns_by_id(dest_net, id);
if (!link_net) {
NL_SET_ERR_MSG(extack, "Unknown network namespace id");
err = -EINVAL;
goto out;
}
err = -EPERM;
if (!netlink_ns_capable(skb, link_net->user_ns, CAP_NET_ADMIN))
goto out;
} else {
link_net = NULL;
}
dev = rtnl_create_link(link_net ? : dest_net, ifname,
name_assign_type, ops, tb, extack);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out;
}
dev->ifindex = ifm->ifi_index;
if (ops->newlink)
err = ops->newlink(link_net ? : net, dev, tb, data, extack);
else
err = register_netdevice(dev);
if (err < 0) {
free_netdev(dev);
goto out;
}
err = rtnl_configure_link(dev, ifm, portid, nlh);
if (err < 0)
goto out_unregister;
if (link_net) {
err = dev_change_net_namespace(dev, dest_net, ifname);
if (err < 0)
goto out_unregister;
}
if (tb[IFLA_MASTER]) {
err = do_set_master(dev, nla_get_u32(tb[IFLA_MASTER]), extack);
if (err)
goto out_unregister;
}
out:
if (link_net)
put_net(link_net);
put_net(dest_net);
return err;
out_unregister:
if (ops->newlink) {
LIST_HEAD(list_kill);
ops->dellink(dev, &list_kill);
unregister_netdevice_many(&list_kill);
} else {
unregister_netdevice(dev);
}
goto out;
}
struct rtnl_newlink_tbs {
struct nlattr *tb[IFLA_MAX + 1];
struct nlattr *attr[RTNL_MAX_TYPE + 1];
struct nlattr *slave_attr[RTNL_SLAVE_MAX_TYPE + 1];
};
static int __rtnl_newlink(struct sk_buff *skb, struct nlmsghdr *nlh,
struct rtnl_newlink_tbs *tbs,
struct netlink_ext_ack *extack)
{
struct nlattr *linkinfo[IFLA_INFO_MAX + 1];
struct nlattr ** const tb = tbs->tb;
const struct rtnl_link_ops *m_ops;
struct net_device *master_dev;
struct net *net = sock_net(skb->sk);
const struct rtnl_link_ops *ops;
struct nlattr **slave_data;
char kind[MODULE_NAME_LEN];
struct net_device *dev;
struct ifinfomsg *ifm;
struct nlattr **data;
bool link_specified;
int err;
#ifdef CONFIG_MODULES
replay:
#endif
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFLA_MAX,
ifla_policy, extack);
if (err < 0)
return err;
err = rtnl_ensure_unique_netns(tb, extack, false);
if (err < 0)
return err;
ifm = nlmsg_data(nlh);
if (ifm->ifi_index > 0) {
link_specified = true;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
dev = __dev_get_by_index(net, ifm->ifi_index);
rtnetlink: Reject negative ifindexes in RTM_NEWLINK Negative ifindexes are illegal, but the kernel does not validate the ifindex in the ancillary header of RTM_NEWLINK messages, resulting in the kernel generating a warning [1] when such an ifindex is specified. Fix by rejecting negative ifindexes. [1] WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593 [...] Call Trace: <TASK> register_netdevice+0x69a/0x1490 net/core/dev.c:10081 br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552 rtnl_newlink_create net/core/rtnetlink.c:3471 [inline] __rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688 rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701 rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:728 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:751 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2538 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2592 __sys_sendmsg+0x117/0x1e0 net/socket.c:2621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 38f7b870d4a6 ("[RTNETLINK]: Link creation API") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230823064348.2252280-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-23 06:43:48 +00:00
} else if (ifm->ifi_index < 0) {
NL_SET_ERR_MSG(extack, "ifindex can't be negative");
return -EINVAL;
} else if (tb[IFLA_IFNAME] || tb[IFLA_ALT_IFNAME]) {
link_specified = true;
dev = rtnl_dev_get(net, tb);
} else {
link_specified = false;
dev = NULL;
}
master_dev = NULL;
m_ops = NULL;
if (dev) {
master_dev = netdev_master_upper_dev_get(dev);
if (master_dev)
m_ops = master_dev->rtnl_link_ops;
}
if (tb[IFLA_LINKINFO]) {
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nla_parse_nested_deprecated(linkinfo, IFLA_INFO_MAX,
tb[IFLA_LINKINFO],
ifla_info_policy, NULL);
if (err < 0)
return err;
} else
memset(linkinfo, 0, sizeof(linkinfo));
if (linkinfo[IFLA_INFO_KIND]) {
nla_strscpy(kind, linkinfo[IFLA_INFO_KIND], sizeof(kind));
ops = rtnl_link_ops_get(kind);
} else {
kind[0] = '\0';
ops = NULL;
}
data = NULL;
if (ops) {
if (ops->maxtype > RTNL_MAX_TYPE)
return -EINVAL;
if (ops->maxtype && linkinfo[IFLA_INFO_DATA]) {
err = nla_parse_nested_deprecated(tbs->attr, ops->maxtype,
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
linkinfo[IFLA_INFO_DATA],
ops->policy, extack);
if (err < 0)
return err;
data = tbs->attr;
}
if (ops->validate) {
err = ops->validate(tb, data, extack);
if (err < 0)
return err;
}
}
slave_data = NULL;
if (m_ops) {
if (m_ops->slave_maxtype > RTNL_SLAVE_MAX_TYPE)
return -EINVAL;
if (m_ops->slave_maxtype &&
linkinfo[IFLA_INFO_SLAVE_DATA]) {
err = nla_parse_nested_deprecated(tbs->slave_attr,
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
m_ops->slave_maxtype,
linkinfo[IFLA_INFO_SLAVE_DATA],
m_ops->slave_policy,
extack);
if (err < 0)
return err;
slave_data = tbs->slave_attr;
}
}
if (dev) {
int status = 0;
if (nlh->nlmsg_flags & NLM_F_EXCL)
return -EEXIST;
if (nlh->nlmsg_flags & NLM_F_REPLACE)
return -EOPNOTSUPP;
err = validate_linkmsg(dev, tb, extack);
if (err < 0)
return err;
if (linkinfo[IFLA_INFO_DATA]) {
if (!ops || ops != dev->rtnl_link_ops ||
!ops->changelink)
return -EOPNOTSUPP;
err = ops->changelink(dev, tb, data, extack);
if (err < 0)
return err;
status |= DO_SETLINK_NOTIFY;
}
if (linkinfo[IFLA_INFO_SLAVE_DATA]) {
if (!m_ops || !m_ops->slave_changelink)
return -EOPNOTSUPP;
err = m_ops->slave_changelink(master_dev, dev, tb,
slave_data, extack);
if (err < 0)
return err;
status |= DO_SETLINK_NOTIFY;
}
return do_setlink(skb, dev, ifm, extack, tb, status);
}
if (!(nlh->nlmsg_flags & NLM_F_CREATE)) {
/* No dev found and NLM_F_CREATE not set. Requested dev does not exist,
* or it's for a group
*/
if (link_specified)
return -ENODEV;
if (tb[IFLA_GROUP])
return rtnl_group_changelink(skb, net,
nla_get_u32(tb[IFLA_GROUP]),
ifm, extack, tb);
return -ENODEV;
}
if (tb[IFLA_MAP] || tb[IFLA_PROTINFO])
return -EOPNOTSUPP;
if (!ops) {
#ifdef CONFIG_MODULES
if (kind[0]) {
__rtnl_unlock();
request_module("rtnl-link-%s", kind);
rtnl_lock();
ops = rtnl_link_ops_get(kind);
if (ops)
goto replay;
}
#endif
NL_SET_ERR_MSG(extack, "Unknown device type");
return -EOPNOTSUPP;
}
return rtnl_newlink_create(skb, ifm, ops, nlh, tb, data, extack);
}
static int rtnl_newlink(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct rtnl_newlink_tbs *tbs;
int ret;
tbs = kmalloc(sizeof(*tbs), GFP_KERNEL);
if (!tbs)
return -ENOMEM;
ret = __rtnl_newlink(skb, nlh, tbs, extack);
kfree(tbs);
return ret;
}
static int rtnl_valid_getlink_req(struct sk_buff *skb,
const struct nlmsghdr *nlh,
struct nlattr **tb,
struct netlink_ext_ack *extack)
{
struct ifinfomsg *ifm;
int i, err;
if (nlh->nlmsg_len < nlmsg_msg_size(sizeof(*ifm))) {
NL_SET_ERR_MSG(extack, "Invalid header for get link");
return -EINVAL;
}
if (!netlink_strict_get_check(skb))
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
return nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFLA_MAX,
ifla_policy, extack);
ifm = nlmsg_data(nlh);
if (ifm->__ifi_pad || ifm->ifi_type || ifm->ifi_flags ||
ifm->ifi_change) {
NL_SET_ERR_MSG(extack, "Invalid values in header for get link request");
return -EINVAL;
}
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated_strict(nlh, sizeof(*ifm), tb, IFLA_MAX,
ifla_policy, extack);
if (err)
return err;
for (i = 0; i <= IFLA_MAX; i++) {
if (!tb[i])
continue;
switch (i) {
case IFLA_IFNAME:
case IFLA_ALT_IFNAME:
case IFLA_EXT_MASK:
case IFLA_TARGET_NETNSID:
break;
default:
NL_SET_ERR_MSG(extack, "Unsupported attribute in get link request");
return -EINVAL;
}
}
return 0;
}
static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
struct net *tgt_net = net;
struct ifinfomsg *ifm;
struct nlattr *tb[IFLA_MAX+1];
struct net_device *dev = NULL;
struct sk_buff *nskb;
int netnsid = -1;
int err;
u32 ext_filter_mask = 0;
err = rtnl_valid_getlink_req(skb, nlh, tb, extack);
if (err < 0)
return err;
err = rtnl_ensure_unique_netns(tb, extack, true);
if (err < 0)
return err;
if (tb[IFLA_TARGET_NETNSID]) {
netnsid = nla_get_s32(tb[IFLA_TARGET_NETNSID]);
tgt_net = rtnl_get_net_ns_capable(NETLINK_CB(skb).sk, netnsid);
if (IS_ERR(tgt_net))
return PTR_ERR(tgt_net);
}
if (tb[IFLA_EXT_MASK])
ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
err = -EINVAL;
ifm = nlmsg_data(nlh);
if (ifm->ifi_index > 0)
dev = __dev_get_by_index(tgt_net, ifm->ifi_index);
else if (tb[IFLA_IFNAME] || tb[IFLA_ALT_IFNAME])
dev = rtnl_dev_get(tgt_net, tb);
else
goto out;
err = -ENODEV;
if (dev == NULL)
goto out;
err = -ENOBUFS;
nskb = nlmsg_new(if_nlmsg_size(dev, ext_filter_mask), GFP_KERNEL);
if (nskb == NULL)
goto out;
err = rtnl_fill_ifinfo(nskb, dev, net,
RTM_NEWLINK, NETLINK_CB(skb).portid,
nlh->nlmsg_seq, 0, 0, ext_filter_mask,
0, NULL, 0, netnsid, GFP_KERNEL);
if (err < 0) {
/* -EMSGSIZE implies BUG in if_nlmsg_size */
WARN_ON(err == -EMSGSIZE);
kfree_skb(nskb);
} else
err = rtnl_unicast(nskb, net, NETLINK_CB(skb).portid);
out:
if (netnsid >= 0)
put_net(tgt_net);
return err;
}
static int rtnl_alt_ifname(int cmd, struct net_device *dev, struct nlattr *attr,
bool *changed, struct netlink_ext_ack *extack)
{
char *alt_ifname;
size_t size;
int err;
err = nla_validate(attr, attr->nla_len, IFLA_MAX, ifla_policy, extack);
if (err)
return err;
if (cmd == RTM_NEWLINKPROP) {
size = rtnl_prop_list_size(dev);
size += nla_total_size(ALTIFNAMSIZ);
if (size >= U16_MAX) {
NL_SET_ERR_MSG(extack,
"effective property list too long");
return -EINVAL;
}
}
alt_ifname = nla_strdup(attr, GFP_KERNEL_ACCOUNT);
net: rtnetlink: fix bugs in rtnl_alt_ifname() Since IFLA_ALT_IFNAME is an NLA_STRING, we have no guarantee it is nul terminated. We should use nla_strdup() instead of kstrdup(), since this helper will make sure not accessing out-of-bounds data. BUG: KMSAN: uninit-value in strlen+0x5e/0xa0 lib/string.c:535 CPU: 1 PID: 19157 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strlen+0x5e/0xa0 lib/string.c:535 kstrdup+0x7f/0x1a0 mm/util.c:59 rtnl_alt_ifname net/core/rtnetlink.c:3495 [inline] rtnl_linkprop+0x85d/0xc00 net/core/rtnetlink.c:3553 rtnl_newlinkprop+0x9d/0xb0 net/core/rtnetlink.c:3568 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b3b9 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ff1c7b1ac78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ff1c7b1b6d4 RCX: 000000000045b3b9 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009cb R14: 00000000004cb3dd R15: 000000000075bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13 04:58:26 +00:00
if (!alt_ifname)
return -ENOMEM;
if (cmd == RTM_NEWLINKPROP) {
err = netdev_name_node_alt_create(dev, alt_ifname);
net: rtnetlink: fix bugs in rtnl_alt_ifname() Since IFLA_ALT_IFNAME is an NLA_STRING, we have no guarantee it is nul terminated. We should use nla_strdup() instead of kstrdup(), since this helper will make sure not accessing out-of-bounds data. BUG: KMSAN: uninit-value in strlen+0x5e/0xa0 lib/string.c:535 CPU: 1 PID: 19157 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strlen+0x5e/0xa0 lib/string.c:535 kstrdup+0x7f/0x1a0 mm/util.c:59 rtnl_alt_ifname net/core/rtnetlink.c:3495 [inline] rtnl_linkprop+0x85d/0xc00 net/core/rtnetlink.c:3553 rtnl_newlinkprop+0x9d/0xb0 net/core/rtnetlink.c:3568 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b3b9 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ff1c7b1ac78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ff1c7b1b6d4 RCX: 000000000045b3b9 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009cb R14: 00000000004cb3dd R15: 000000000075bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13 04:58:26 +00:00
if (!err)
alt_ifname = NULL;
} else if (cmd == RTM_DELLINKPROP) {
err = netdev_name_node_alt_destroy(dev, alt_ifname);
} else {
net: rtnetlink: fix bugs in rtnl_alt_ifname() Since IFLA_ALT_IFNAME is an NLA_STRING, we have no guarantee it is nul terminated. We should use nla_strdup() instead of kstrdup(), since this helper will make sure not accessing out-of-bounds data. BUG: KMSAN: uninit-value in strlen+0x5e/0xa0 lib/string.c:535 CPU: 1 PID: 19157 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strlen+0x5e/0xa0 lib/string.c:535 kstrdup+0x7f/0x1a0 mm/util.c:59 rtnl_alt_ifname net/core/rtnetlink.c:3495 [inline] rtnl_linkprop+0x85d/0xc00 net/core/rtnetlink.c:3553 rtnl_newlinkprop+0x9d/0xb0 net/core/rtnetlink.c:3568 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b3b9 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ff1c7b1ac78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ff1c7b1b6d4 RCX: 000000000045b3b9 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009cb R14: 00000000004cb3dd R15: 000000000075bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13 04:58:26 +00:00
WARN_ON_ONCE(1);
err = -EINVAL;
}
net: rtnetlink: fix bugs in rtnl_alt_ifname() Since IFLA_ALT_IFNAME is an NLA_STRING, we have no guarantee it is nul terminated. We should use nla_strdup() instead of kstrdup(), since this helper will make sure not accessing out-of-bounds data. BUG: KMSAN: uninit-value in strlen+0x5e/0xa0 lib/string.c:535 CPU: 1 PID: 19157 Comm: syz-executor.5 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 strlen+0x5e/0xa0 lib/string.c:535 kstrdup+0x7f/0x1a0 mm/util.c:59 rtnl_alt_ifname net/core/rtnetlink.c:3495 [inline] rtnl_linkprop+0x85d/0xc00 net/core/rtnetlink.c:3553 rtnl_newlinkprop+0x9d/0xb0 net/core/rtnetlink.c:3568 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b3b9 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ff1c7b1ac78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ff1c7b1b6d4 RCX: 000000000045b3b9 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009cb R14: 00000000004cb3dd R15: 000000000075bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@mellanox.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-13 04:58:26 +00:00
kfree(alt_ifname);
if (!err)
*changed = true;
return err;
}
static int rtnl_linkprop(int cmd, struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
struct nlattr *tb[IFLA_MAX + 1];
struct net_device *dev;
struct ifinfomsg *ifm;
bool changed = false;
struct nlattr *attr;
int err, rem;
err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy, extack);
if (err)
return err;
err = rtnl_ensure_unique_netns(tb, extack, true);
if (err)
return err;
ifm = nlmsg_data(nlh);
if (ifm->ifi_index > 0)
dev = __dev_get_by_index(net, ifm->ifi_index);
else if (tb[IFLA_IFNAME] || tb[IFLA_ALT_IFNAME])
dev = rtnl_dev_get(net, tb);
else
return -EINVAL;
if (!dev)
return -ENODEV;
if (!tb[IFLA_PROP_LIST])
return 0;
nla_for_each_nested(attr, tb[IFLA_PROP_LIST], rem) {
switch (nla_type(attr)) {
case IFLA_ALT_IFNAME:
err = rtnl_alt_ifname(cmd, dev, attr, &changed, extack);
if (err)
return err;
break;
}
}
if (changed)
netdev_state_change(dev);
return 0;
}
static int rtnl_newlinkprop(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
return rtnl_linkprop(RTM_NEWLINKPROP, skb, nlh, extack);
}
static int rtnl_dellinkprop(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
return rtnl_linkprop(RTM_DELLINKPROP, skb, nlh, extack);
}
static u32 rtnl_calcit(struct sk_buff *skb, struct nlmsghdr *nlh)
{
struct net *net = sock_net(skb->sk);
size_t min_ifinfo_dump_size = 0;
struct nlattr *tb[IFLA_MAX+1];
u32 ext_filter_mask = 0;
struct net_device *dev;
int hdrlen;
/* Same kernel<->userspace interface hack as in rtnl_dump_ifinfo. */
hdrlen = nlmsg_len(nlh) < sizeof(struct ifinfomsg) ?
sizeof(struct rtgenmsg) : sizeof(struct ifinfomsg);
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
if (nlmsg_parse_deprecated(nlh, hdrlen, tb, IFLA_MAX, ifla_policy, NULL) >= 0) {
if (tb[IFLA_EXT_MASK])
ext_filter_mask = nla_get_u32(tb[IFLA_EXT_MASK]);
}
if (!ext_filter_mask)
return NLMSG_GOODSIZE;
/*
* traverse the list of net devices and compute the minimum
* buffer size based upon the filter mask.
*/
rcu_read_lock();
for_each_netdev_rcu(net, dev) {
min_ifinfo_dump_size = max(min_ifinfo_dump_size,
if_nlmsg_size(dev, ext_filter_mask));
}
rcu_read_unlock();
return nlmsg_total_size(min_ifinfo_dump_size);
}
static int rtnl_dump_all(struct sk_buff *skb, struct netlink_callback *cb)
{
int idx;
int s_idx = cb->family;
int type = cb->nlh->nlmsg_type - RTM_BASE;
int ret = 0;
if (s_idx == 0)
s_idx = 1;
for (idx = 1; idx <= RTNL_FAMILY_MAX; idx++) {
struct rtnl_link __rcu **tab;
struct rtnl_link *link;
rtnl_dumpit_func dumpit;
if (idx < s_idx || idx == PF_PACKET)
continue;
if (type < 0 || type >= RTM_NR_MSGTYPES)
continue;
tab = rcu_dereference_rtnl(rtnl_msg_handlers[idx]);
if (!tab)
continue;
link = rcu_dereference_rtnl(tab[type]);
if (!link)
continue;
dumpit = link->dumpit;
if (!dumpit)
continue;
if (idx > s_idx) {
memset(&cb->args[0], 0, sizeof(cb->args));
cb->prev_seq = 0;
cb->seq = 0;
}
ret = dumpit(skb, cb);
rtnetlink: restore handling of dumpit return value in rtnl_dump_all() For non-zero return from dumpit() we should break the loop in rtnl_dump_all() and return the result. Otherwise, e.g., we could get the memory leak in inet6_dump_fib() [1]. The pointer to the allocated struct fib6_walker there (saved in cb->args) can be lost, reset on the next iteration. Fix it by partially restoring the previous behavior before commit c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function"). The returned error from dumpit() is still passed further. [1]: unreferenced object 0xffff88001322a200 (size 96): comm "sshd", pid 1484, jiffies 4296032768 (age 1432.542s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de ................ 18 09 41 36 00 88 ff ff 18 09 41 36 00 88 ff ff ..A6......A6.... backtrace: [<0000000095846b39>] kmem_cache_alloc_trace+0x151/0x220 [<000000007d12709f>] inet6_dump_fib+0x68d/0x940 [<000000002775a316>] rtnl_dump_all+0x1d9/0x2d0 [<00000000d7cd302b>] netlink_dump+0x945/0x11a0 [<000000002f43485f>] __netlink_dump_start+0x55d/0x800 [<00000000f76bbeec>] rtnetlink_rcv_msg+0x4fa/0xa00 [<000000009b5761f3>] netlink_rcv_skb+0x29c/0x420 [<0000000087a1dae1>] rtnetlink_rcv+0x15/0x20 [<00000000691b703b>] netlink_unicast+0x4e3/0x6c0 [<00000000b5be0204>] netlink_sendmsg+0x7f2/0xba0 [<0000000096d2aa60>] sock_sendmsg+0xba/0xf0 [<000000008c1b786f>] __sys_sendto+0x1e4/0x330 [<0000000019587b3f>] __x64_sys_sendto+0xe1/0x1a0 [<00000000071f4d56>] do_syscall_64+0x9f/0x300 [<000000002737577f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<0000000057587684>] 0xffffffffffffffff Fixes: c63586dc9b3e ("net: rtnl_dump_all needs to propagate error from dumpit function") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02 16:11:04 +00:00
if (ret)
break;
}
cb->family = idx;
return skb->len ? : ret;
}
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 21:46:24 +00:00
struct sk_buff *rtmsg_ifinfo_build_skb(int type, struct net_device *dev,
unsigned int change,
u32 event, gfp_t flags, int *new_nsid,
rtnetlink: Restore RTM_NEW/DELLINK notification behavior The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce1b4f ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136cab37 ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Guillaume Nault <gnault@redhat.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-11 07:43:19 +00:00
int new_ifindex, u32 portid,
const struct nlmsghdr *nlh)
{
struct net *net = dev_net(dev);
struct sk_buff *skb;
int err = -ENOBUFS;
rtnetlink: Restore RTM_NEW/DELLINK notification behavior The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce1b4f ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136cab37 ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Guillaume Nault <gnault@redhat.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-11 07:43:19 +00:00
u32 seq = 0;
skb = nlmsg_new(if_nlmsg_size(dev, 0), flags);
if (skb == NULL)
goto errout;
rtnetlink: Restore RTM_NEW/DELLINK notification behavior The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce1b4f ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136cab37 ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Guillaume Nault <gnault@redhat.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-11 07:43:19 +00:00
if (nlmsg_report(nlh))
seq = nlmsg_seq(nlh);
else
portid = 0;
err = rtnl_fill_ifinfo(skb, dev, dev_net(dev),
type, portid, seq, change, 0, 0, event,
new_nsid, new_ifindex, -1, flags);
if (err < 0) {
/* -EMSGSIZE implies BUG in if_nlmsg_size() */
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
goto errout;
}
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 21:46:24 +00:00
return skb;
errout:
if (err < 0)
rtnl_set_sk_err(net, RTNLGRP_LINK, err);
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 21:46:24 +00:00
return NULL;
}
void rtmsg_ifinfo_send(struct sk_buff *skb, struct net_device *dev, gfp_t flags,
u32 portid, const struct nlmsghdr *nlh)
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 21:46:24 +00:00
{
struct net *net = dev_net(dev);
rtnl_notify(skb, net, portid, RTNLGRP_LINK, nlh, flags);
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 21:46:24 +00:00
}
static void rtmsg_ifinfo_event(int type, struct net_device *dev,
unsigned int change, u32 event,
gfp_t flags, int *new_nsid, int new_ifindex,
u32 portid, const struct nlmsghdr *nlh)
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 21:46:24 +00:00
{
struct sk_buff *skb;
if (dev->reg_state != NETREG_REGISTERED)
return;
skb = rtmsg_ifinfo_build_skb(type, dev, change, event, flags, new_nsid,
rtnetlink: Restore RTM_NEW/DELLINK notification behavior The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce1b4f ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136cab37 ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Guillaume Nault <gnault@redhat.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-11 07:43:19 +00:00
new_ifindex, portid, nlh);
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 21:46:24 +00:00
if (skb)
rtmsg_ifinfo_send(skb, dev, flags, portid, nlh);
}
void rtmsg_ifinfo(int type, struct net_device *dev, unsigned int change,
gfp_t flags, u32 portid, const struct nlmsghdr *nlh)
{
rtmsg_ifinfo_event(type, dev, change, rtnl_get_event(0), flags,
NULL, 0, portid, nlh);
}
void rtmsg_ifinfo_newnet(int type, struct net_device *dev, unsigned int change,
gfp_t flags, int *new_nsid, int new_ifindex)
{
rtmsg_ifinfo_event(type, dev, change, rtnl_get_event(0), flags,
new_nsid, new_ifindex, 0, NULL);
}
static int nlmsg_populate_fdb_fill(struct sk_buff *skb,
struct net_device *dev,
u8 *addr, u16 vid, u32 pid, u32 seq,
int type, unsigned int flags,
int nlflags, u16 ndm_state)
{
struct nlmsghdr *nlh;
struct ndmsg *ndm;
nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ndm), nlflags);
if (!nlh)
return -EMSGSIZE;
ndm = nlmsg_data(nlh);
ndm->ndm_family = AF_BRIDGE;
ndm->ndm_pad1 = 0;
ndm->ndm_pad2 = 0;
ndm->ndm_flags = flags;
ndm->ndm_type = 0;
ndm->ndm_ifindex = dev->ifindex;
ndm->ndm_state = ndm_state;
netlink: do not hard code device address lenth in fdb dumps syzbot reports that some netdev devices do not have a six bytes address [1] Replace ETH_ALEN by dev->addr_len. [1] (Case of a device where dev->addr_len = 4) BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copyout+0xb8/0x100 lib/iov_iter.c:169 _copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536 copy_to_iter include/linux/uio.h:206 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg net/socket.c:1040 [inline] ____sys_recvmsg+0x283/0x7f0 net/socket.c:2722 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: __nla_put lib/nlattr.c:1009 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1067 nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071 nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline] ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456 rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629 netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268 netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995 sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019 ____sys_recvmsg+0x664/0x7f0 net/socket.c:2720 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716 slab_alloc_node mm/slub.c:3451 [inline] __kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490 kmalloc_trace+0x51/0x200 mm/slab_common.c:1057 kmalloc include/linux/slab.h:559 [inline] __hw_addr_create net/core/dev_addr_lists.c:60 [inline] __hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:867 [inline] dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885 igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680 ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754 ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708 addrconf_type_change net/ipv6/addrconf.c:3731 [inline] addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1935 [inline] call_netdevice_notifiers_extack net/core/dev.c:1973 [inline] call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987 bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906 do_set_master net/core/rtnetlink.c:2626 [inline] rtnl_newlink_create net/core/rtnetlink.c:3460 [inline] __rtnl_newlink net/core/rtnetlink.c:3660 [inline] rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673 rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf28/0x1230 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x122f/0x13d0 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x999/0xd50 net/socket.c:2503 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2557 __sys_sendmsg net/socket.c:2586 [inline] __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x304/0x490 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Bytes 2856-2857 of 3500 are uninitialized Memory access of size 3500 starts at ffff888018d99104 Data copied to user address 0000000020000480 Fixes: d83b06036048 ("net: add fdb generic dump routine") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230621174720.1845040-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21 17:47:20 +00:00
if (nla_put(skb, NDA_LLADDR, dev->addr_len, addr))
goto nla_put_failure;
if (vid)
if (nla_put(skb, NDA_VLAN, sizeof(u16), &vid))
goto nla_put_failure;
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:09:00 +00:00
nlmsg_end(skb, nlh);
return 0;
nla_put_failure:
nlmsg_cancel(skb, nlh);
return -EMSGSIZE;
}
netlink: do not hard code device address lenth in fdb dumps syzbot reports that some netdev devices do not have a six bytes address [1] Replace ETH_ALEN by dev->addr_len. [1] (Case of a device where dev->addr_len = 4) BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copyout+0xb8/0x100 lib/iov_iter.c:169 _copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536 copy_to_iter include/linux/uio.h:206 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg net/socket.c:1040 [inline] ____sys_recvmsg+0x283/0x7f0 net/socket.c:2722 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: __nla_put lib/nlattr.c:1009 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1067 nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071 nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline] ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456 rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629 netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268 netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995 sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019 ____sys_recvmsg+0x664/0x7f0 net/socket.c:2720 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716 slab_alloc_node mm/slub.c:3451 [inline] __kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490 kmalloc_trace+0x51/0x200 mm/slab_common.c:1057 kmalloc include/linux/slab.h:559 [inline] __hw_addr_create net/core/dev_addr_lists.c:60 [inline] __hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:867 [inline] dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885 igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680 ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754 ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708 addrconf_type_change net/ipv6/addrconf.c:3731 [inline] addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1935 [inline] call_netdevice_notifiers_extack net/core/dev.c:1973 [inline] call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987 bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906 do_set_master net/core/rtnetlink.c:2626 [inline] rtnl_newlink_create net/core/rtnetlink.c:3460 [inline] __rtnl_newlink net/core/rtnetlink.c:3660 [inline] rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673 rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf28/0x1230 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x122f/0x13d0 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x999/0xd50 net/socket.c:2503 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2557 __sys_sendmsg net/socket.c:2586 [inline] __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x304/0x490 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Bytes 2856-2857 of 3500 are uninitialized Memory access of size 3500 starts at ffff888018d99104 Data copied to user address 0000000020000480 Fixes: d83b06036048 ("net: add fdb generic dump routine") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230621174720.1845040-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21 17:47:20 +00:00
static inline size_t rtnl_fdb_nlmsg_size(const struct net_device *dev)
{
return NLMSG_ALIGN(sizeof(struct ndmsg)) +
netlink: do not hard code device address lenth in fdb dumps syzbot reports that some netdev devices do not have a six bytes address [1] Replace ETH_ALEN by dev->addr_len. [1] (Case of a device where dev->addr_len = 4) BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copyout+0xb8/0x100 lib/iov_iter.c:169 _copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536 copy_to_iter include/linux/uio.h:206 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg net/socket.c:1040 [inline] ____sys_recvmsg+0x283/0x7f0 net/socket.c:2722 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: __nla_put lib/nlattr.c:1009 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1067 nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071 nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline] ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456 rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629 netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268 netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995 sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019 ____sys_recvmsg+0x664/0x7f0 net/socket.c:2720 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716 slab_alloc_node mm/slub.c:3451 [inline] __kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490 kmalloc_trace+0x51/0x200 mm/slab_common.c:1057 kmalloc include/linux/slab.h:559 [inline] __hw_addr_create net/core/dev_addr_lists.c:60 [inline] __hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:867 [inline] dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885 igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680 ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754 ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708 addrconf_type_change net/ipv6/addrconf.c:3731 [inline] addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1935 [inline] call_netdevice_notifiers_extack net/core/dev.c:1973 [inline] call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987 bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906 do_set_master net/core/rtnetlink.c:2626 [inline] rtnl_newlink_create net/core/rtnetlink.c:3460 [inline] __rtnl_newlink net/core/rtnetlink.c:3660 [inline] rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673 rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf28/0x1230 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x122f/0x13d0 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x999/0xd50 net/socket.c:2503 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2557 __sys_sendmsg net/socket.c:2586 [inline] __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x304/0x490 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Bytes 2856-2857 of 3500 are uninitialized Memory access of size 3500 starts at ffff888018d99104 Data copied to user address 0000000020000480 Fixes: d83b06036048 ("net: add fdb generic dump routine") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230621174720.1845040-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21 17:47:20 +00:00
nla_total_size(dev->addr_len) + /* NDA_LLADDR */
nla_total_size(sizeof(u16)) + /* NDA_VLAN */
0;
}
static void rtnl_fdb_notify(struct net_device *dev, u8 *addr, u16 vid, int type,
u16 ndm_state)
{
struct net *net = dev_net(dev);
struct sk_buff *skb;
int err = -ENOBUFS;
netlink: do not hard code device address lenth in fdb dumps syzbot reports that some netdev devices do not have a six bytes address [1] Replace ETH_ALEN by dev->addr_len. [1] (Case of a device where dev->addr_len = 4) BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copyout+0xb8/0x100 lib/iov_iter.c:169 _copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536 copy_to_iter include/linux/uio.h:206 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg net/socket.c:1040 [inline] ____sys_recvmsg+0x283/0x7f0 net/socket.c:2722 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: __nla_put lib/nlattr.c:1009 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1067 nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071 nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline] ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456 rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629 netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268 netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995 sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019 ____sys_recvmsg+0x664/0x7f0 net/socket.c:2720 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716 slab_alloc_node mm/slub.c:3451 [inline] __kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490 kmalloc_trace+0x51/0x200 mm/slab_common.c:1057 kmalloc include/linux/slab.h:559 [inline] __hw_addr_create net/core/dev_addr_lists.c:60 [inline] __hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:867 [inline] dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885 igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680 ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754 ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708 addrconf_type_change net/ipv6/addrconf.c:3731 [inline] addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1935 [inline] call_netdevice_notifiers_extack net/core/dev.c:1973 [inline] call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987 bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906 do_set_master net/core/rtnetlink.c:2626 [inline] rtnl_newlink_create net/core/rtnetlink.c:3460 [inline] __rtnl_newlink net/core/rtnetlink.c:3660 [inline] rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673 rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf28/0x1230 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x122f/0x13d0 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x999/0xd50 net/socket.c:2503 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2557 __sys_sendmsg net/socket.c:2586 [inline] __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x304/0x490 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Bytes 2856-2857 of 3500 are uninitialized Memory access of size 3500 starts at ffff888018d99104 Data copied to user address 0000000020000480 Fixes: d83b06036048 ("net: add fdb generic dump routine") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230621174720.1845040-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21 17:47:20 +00:00
skb = nlmsg_new(rtnl_fdb_nlmsg_size(dev), GFP_ATOMIC);
if (!skb)
goto errout;
err = nlmsg_populate_fdb_fill(skb, dev, addr, vid,
0, 0, type, NTF_SELF, 0, ndm_state);
if (err < 0) {
kfree_skb(skb);
goto errout;
}
rtnl_notify(skb, net, 0, RTNLGRP_NEIGH, NULL, GFP_ATOMIC);
return;
errout:
rtnl_set_sk_err(net, RTNLGRP_NEIGH, err);
}
net/core: Fix rtnetlink kernel-doc headers This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25 16:17:22 +00:00
/*
* ndo_dflt_fdb_add - default netdevice operation to add an FDB entry
*/
int ndo_dflt_fdb_add(struct ndmsg *ndm,
struct nlattr *tb[],
struct net_device *dev,
const unsigned char *addr, u16 vid,
u16 flags)
{
int err = -EINVAL;
/* If aging addresses are supported device will need to
* implement its own handler for this.
*/
if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) {
netdev_info(dev, "default FDB implementation only supports local addresses\n");
return err;
}
bridge: Add MAC Authentication Bypass (MAB) support Hosts that support 802.1X authentication are able to authenticate themselves by exchanging EAPOL frames with an authenticator (Ethernet bridge, in this case) and an authentication server. Access to the network is only granted by the authenticator to successfully authenticated hosts. The above is implemented in the bridge using the "locked" bridge port option. When enabled, link-local frames (e.g., EAPOL) can be locally received by the bridge, but all other frames are dropped unless the host is authenticated. That is, unless the user space control plane installed an FDB entry according to which the source address of the frame is located behind the locked ingress port. The entry can be dynamic, in which case learning needs to be enabled so that the entry will be refreshed by incoming traffic. There are deployments in which not all the devices connected to the authenticator (the bridge) support 802.1X. Such devices can include printers and cameras. One option to support such deployments is to unlock the bridge ports connecting these devices, but a slightly more secure option is to use MAB. When MAB is enabled, the MAC address of the connected device is used as the user name and password for the authentication. For MAB to work, the user space control plane needs to be notified about MAC addresses that are trying to gain access so that they will be compared against an allow list. This can be implemented via the regular learning process with the sole difference that learned FDB entries are installed with a new "locked" flag indicating that the entry cannot be used to authenticate the device. The flag cannot be set by user space, but user space can clear the flag by replacing the entry, thereby authenticating the device. Locked FDB entries implement the following semantics with regards to roaming, aging and forwarding: 1. Roaming: Locked FDB entries can roam to unlocked (authorized) ports, in which case the "locked" flag is cleared. FDB entries cannot roam to locked ports regardless of MAB being enabled or not. Therefore, locked FDB entries are only created if an FDB entry with the given {MAC, VID} does not already exist. This behavior prevents unauthenticated devices from disrupting traffic destined to already authenticated devices. 2. Aging: Locked FDB entries age and refresh by incoming traffic like regular entries. 3. Forwarding: Locked FDB entries forward traffic like regular entries. If user space detects an unauthorized MAC behind a locked port and wishes to prevent traffic with this MAC DA from reaching the host, it can do so using tc or a different mechanism. Enable the above behavior using a new bridge port option called "mab". It can only be enabled on a bridge port that is both locked and has learning enabled. Locked FDB entries are flushed from the port once MAB is disabled. A new option is added because there are pure 802.1X deployments that are not interested in notifications about locked FDB entries. Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01 19:39:21 +00:00
if (tb[NDA_FLAGS_EXT]) {
netdev_info(dev, "invalid flags given to default FDB implementation\n");
return err;
}
if (vid) {
netdev_info(dev, "vlans aren't supported yet for dev_uc|mc_add()\n");
return err;
}
if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr))
err = dev_uc_add_excl(dev, addr);
else if (is_multicast_ether_addr(addr))
err = dev_mc_add_excl(dev, addr);
/* Only return duplicate errors if NLM_F_EXCL is set */
if (err == -EEXIST && !(flags & NLM_F_EXCL))
err = 0;
return err;
}
EXPORT_SYMBOL(ndo_dflt_fdb_add);
static int fdb_vid_parse(struct nlattr *vlan_attr, u16 *p_vid,
struct netlink_ext_ack *extack)
{
u16 vid = 0;
if (vlan_attr) {
if (nla_len(vlan_attr) != sizeof(u16)) {
NL_SET_ERR_MSG(extack, "invalid vlan attribute size");
return -EINVAL;
}
vid = nla_get_u16(vlan_attr);
if (!vid || vid >= VLAN_VID_MASK) {
NL_SET_ERR_MSG(extack, "invalid vlan id");
return -EINVAL;
}
}
*p_vid = vid;
return 0;
}
static int rtnl_fdb_add(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
{
struct net *net = sock_net(skb->sk);
struct ndmsg *ndm;
struct nlattr *tb[NDA_MAX+1];
struct net_device *dev;
u8 *addr;
u16 vid;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
int err;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated(nlh, sizeof(*ndm), tb, NDA_MAX, NULL,
extack);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
if (err < 0)
return err;
ndm = nlmsg_data(nlh);
if (ndm->ndm_ifindex == 0) {
NL_SET_ERR_MSG(extack, "invalid ifindex");
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
return -EINVAL;
}
dev = __dev_get_by_index(net, ndm->ndm_ifindex);
if (dev == NULL) {
NL_SET_ERR_MSG(extack, "unknown ifindex");
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
return -ENODEV;
}
if (!tb[NDA_LLADDR] || nla_len(tb[NDA_LLADDR]) != ETH_ALEN) {
NL_SET_ERR_MSG(extack, "invalid address");
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
return -EINVAL;
}
rtnetlink: Disallow FDB configuration for non-Ethernet device When an FDB entry is configured, the address is validated to have the length of an Ethernet address, but the device for which the address is configured can be of any type. The above can result in the use of uninitialized memory when the address is later compared against existing addresses since 'dev->addr_len' is used and it may be greater than ETH_ALEN, as with ip6tnl devices. Fix this by making sure that FDB entries are only configured for Ethernet devices. BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863 CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x14b/0x190 lib/dump_stack.c:113 kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956 __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645 memcmp+0x11d/0x180 lib/string.c:863 dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464 ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline] rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558 rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715 netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440ee9 Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0 R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181 kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2718 [inline] __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:996 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline] netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 v2: * Make error message more specific (David) Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_<op>") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-29 20:36:43 +00:00
if (dev->type != ARPHRD_ETHER) {
NL_SET_ERR_MSG(extack, "FDB add only supported for Ethernet devices");
return -EINVAL;
}
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
addr = nla_data(tb[NDA_LLADDR]);
err = fdb_vid_parse(tb[NDA_VLAN], &vid, extack);
if (err)
return err;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
err = -EOPNOTSUPP;
/* Support fdb on master device the net/bridge default case */
if ((!ndm->ndm_flags || ndm->ndm_flags & NTF_MASTER) &&
netif_is_bridge_port(dev)) {
struct net_device *br_dev = netdev_master_upper_dev_get(dev);
const struct net_device_ops *ops = br_dev->netdev_ops;
err = ops->ndo_fdb_add(ndm, tb, dev, addr, vid,
nlh->nlmsg_flags, extack);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
if (err)
goto out;
else
ndm->ndm_flags &= ~NTF_MASTER;
}
/* Embedded bridge, macvlan, and any other device support */
if ((ndm->ndm_flags & NTF_SELF)) {
if (dev->netdev_ops->ndo_fdb_add)
err = dev->netdev_ops->ndo_fdb_add(ndm, tb, dev, addr,
vid,
nlh->nlmsg_flags,
extack);
else
err = ndo_dflt_fdb_add(ndm, tb, dev, addr, vid,
nlh->nlmsg_flags);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
if (!err) {
rtnl_fdb_notify(dev, addr, vid, RTM_NEWNEIGH,
ndm->ndm_state);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
ndm->ndm_flags &= ~NTF_SELF;
}
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
}
out:
return err;
}
net/core: Fix rtnetlink kernel-doc headers This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25 16:17:22 +00:00
/*
* ndo_dflt_fdb_del - default netdevice operation to delete an FDB entry
*/
int ndo_dflt_fdb_del(struct ndmsg *ndm,
struct nlattr *tb[],
struct net_device *dev,
const unsigned char *addr, u16 vid)
{
int err = -EINVAL;
/* If aging addresses are supported device will need to
* implement its own handler for this.
*/
if (!(ndm->ndm_state & NUD_PERMANENT)) {
netdev_info(dev, "default FDB implementation only supports local addresses\n");
return err;
}
if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr))
err = dev_uc_del(dev, addr);
else if (is_multicast_ether_addr(addr))
err = dev_mc_del(dev, addr);
return err;
}
EXPORT_SYMBOL(ndo_dflt_fdb_del);
static const struct nla_policy fdb_del_bulk_policy[NDA_MAX + 1] = {
[NDA_VLAN] = { .type = NLA_U16 },
[NDA_IFINDEX] = NLA_POLICY_MIN(NLA_S32, 1),
[NDA_NDM_STATE_MASK] = { .type = NLA_U16 },
[NDA_NDM_FLAGS_MASK] = { .type = NLA_U8 },
};
static int rtnl_fdb_del(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
{
bool del_bulk = !!(nlh->nlmsg_flags & NLM_F_BULK);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
struct net *net = sock_net(skb->sk);
const struct net_device_ops *ops;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
struct ndmsg *ndm;
struct nlattr *tb[NDA_MAX+1];
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
struct net_device *dev;
__u8 *addr = NULL;
int err;
u16 vid;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
if (!netlink_capable(skb, CAP_NET_ADMIN))
return -EPERM;
if (!del_bulk) {
err = nlmsg_parse_deprecated(nlh, sizeof(*ndm), tb, NDA_MAX,
NULL, extack);
} else {
err = nlmsg_parse(nlh, sizeof(*ndm), tb, NDA_MAX,
fdb_del_bulk_policy, extack);
}
if (err < 0)
return err;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
ndm = nlmsg_data(nlh);
if (ndm->ndm_ifindex == 0) {
NL_SET_ERR_MSG(extack, "invalid ifindex");
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
return -EINVAL;
}
dev = __dev_get_by_index(net, ndm->ndm_ifindex);
if (dev == NULL) {
NL_SET_ERR_MSG(extack, "unknown ifindex");
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
return -ENODEV;
}
if (!del_bulk) {
if (!tb[NDA_LLADDR] || nla_len(tb[NDA_LLADDR]) != ETH_ALEN) {
NL_SET_ERR_MSG(extack, "invalid address");
return -EINVAL;
}
addr = nla_data(tb[NDA_LLADDR]);
}
rtnetlink: Disallow FDB configuration for non-Ethernet device When an FDB entry is configured, the address is validated to have the length of an Ethernet address, but the device for which the address is configured can be of any type. The above can result in the use of uninitialized memory when the address is later compared against existing addresses since 'dev->addr_len' is used and it may be greater than ETH_ALEN, as with ip6tnl devices. Fix this by making sure that FDB entries are only configured for Ethernet devices. BUG: KMSAN: uninit-value in memcmp+0x11d/0x180 lib/string.c:863 CPU: 1 PID: 4318 Comm: syz-executor998 Not tainted 4.19.0-rc3+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x14b/0x190 lib/dump_stack.c:113 kmsan_report+0x183/0x2b0 mm/kmsan/kmsan.c:956 __msan_warning+0x70/0xc0 mm/kmsan/kmsan_instr.c:645 memcmp+0x11d/0x180 lib/string.c:863 dev_uc_add_excl+0x165/0x7b0 net/core/dev_addr_lists.c:464 ndo_dflt_fdb_add net/core/rtnetlink.c:3463 [inline] rtnl_fdb_add+0x1081/0x1270 net/core/rtnetlink.c:3558 rtnetlink_rcv_msg+0xa0b/0x1530 net/core/rtnetlink.c:4715 netlink_rcv_skb+0x36e/0x5f0 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4733 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x1638/0x1720 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x1205/0x1290 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x440ee9 Code: e8 cc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff6a93b518 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440ee9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 000000000000b4b0 R13: 0000000000401ec0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:256 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:181 kmsan_kmalloc+0x98/0x100 mm/kmsan/kmsan_hooks.c:91 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:100 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2718 [inline] __kmalloc_node_track_caller+0x9e7/0x1160 mm/slub.c:4351 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2f5/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:996 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline] netlink_sendmsg+0xb49/0x1290 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe70/0x1290 net/socket.c:2114 __sys_sendmsg net/socket.c:2152 [inline] __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg+0x2a3/0x3d0 net/socket.c:2159 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2159 do_syscall_64+0xb8/0x100 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 v2: * Make error message more specific (David) Fixes: 090096bf3db1 ("net: generic fdb support for drivers without ndo_fdb_<op>") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-and-tested-by: syzbot+3a288d5f5530b901310e@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+d53ab4e92a1db04110ff@syzkaller.appspotmail.com Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-29 20:36:43 +00:00
if (dev->type != ARPHRD_ETHER) {
NL_SET_ERR_MSG(extack, "FDB delete only supported for Ethernet devices");
return -EINVAL;
}
err = fdb_vid_parse(tb[NDA_VLAN], &vid, extack);
if (err)
return err;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
err = -EOPNOTSUPP;
/* Support fdb on master device the net/bridge default case */
if ((!ndm->ndm_flags || ndm->ndm_flags & NTF_MASTER) &&
netif_is_bridge_port(dev)) {
struct net_device *br_dev = netdev_master_upper_dev_get(dev);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
ops = br_dev->netdev_ops;
if (!del_bulk) {
if (ops->ndo_fdb_del)
err = ops->ndo_fdb_del(ndm, tb, dev, addr, vid, extack);
} else {
if (ops->ndo_fdb_del_bulk)
err = ops->ndo_fdb_del_bulk(ndm, tb, dev, vid,
extack);
}
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
if (err)
goto out;
else
ndm->ndm_flags &= ~NTF_MASTER;
}
/* Embedded bridge, macvlan, and any other device support */
if (ndm->ndm_flags & NTF_SELF) {
ops = dev->netdev_ops;
if (!del_bulk) {
if (ops->ndo_fdb_del)
err = ops->ndo_fdb_del(ndm, tb, dev, addr, vid, extack);
else
err = ndo_dflt_fdb_del(ndm, tb, dev, addr, vid);
} else {
/* in case err was cleared by NTF_MASTER call */
err = -EOPNOTSUPP;
if (ops->ndo_fdb_del_bulk)
err = ops->ndo_fdb_del_bulk(ndm, tb, dev, vid,
extack);
}
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
if (!err) {
if (!del_bulk)
rtnl_fdb_notify(dev, addr, vid, RTM_DELNEIGH,
ndm->ndm_state);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
ndm->ndm_flags &= ~NTF_SELF;
}
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
}
out:
return err;
}
static int nlmsg_populate_fdb(struct sk_buff *skb,
struct netlink_callback *cb,
struct net_device *dev,
int *idx,
struct netdev_hw_addr_list *list)
{
struct netdev_hw_addr *ha;
int err;
u32 portid, seq;
portid = NETLINK_CB(cb->skb).portid;
seq = cb->nlh->nlmsg_seq;
list_for_each_entry(ha, &list->list, list) {
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
if (*idx < cb->args[2])
goto skip;
err = nlmsg_populate_fdb_fill(skb, dev, ha->addr, 0,
portid, seq,
RTM_NEWNEIGH, NTF_SELF,
NLM_F_MULTI, NUD_PERMANENT);
if (err < 0)
return err;
skip:
*idx += 1;
}
return 0;
}
/**
* ndo_dflt_fdb_dump - default netdevice operation to dump an FDB table.
net/core: Fix rtnetlink kernel-doc headers This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25 16:17:22 +00:00
* @skb: socket buffer to store message in
* @cb: netlink callback
* @dev: netdevice
net/core: Fix rtnetlink kernel-doc headers This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-25 16:17:22 +00:00
* @filter_dev: ignored
* @idx: the number of FDB table entries dumped is added to *@idx
*
* Default netdevice operation to dump the existing unicast address list.
* Returns number of addresses from list put in skb.
*/
int ndo_dflt_fdb_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct net_device *dev,
struct net_device *filter_dev,
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
int *idx)
{
int err;
rtnetlink: ndo_dflt_fdb_dump() only work for ARPHRD_ETHER devices kmsan was able to trigger a kernel-infoleak using a gre device [1] nlmsg_populate_fdb_fill() has a hard coded assumption that dev->addr_len is ETH_ALEN, as normally guaranteed for ARPHRD_ETHER devices. A similar issue was fixed recently in commit da71577545a5 ("rtnetlink: Disallow FDB configuration for non-Ethernet device") [1] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x32d/0x480 lib/dump_stack.c:113 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634 copyout lib/iov_iter.c:143 [inline] _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 copy_to_iter include/linux/uio.h:143 [inline] skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline] netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0x1d1/0x230 net/socket.c:801 ___sys_recvmsg+0x444/0xae0 net/socket.c:2278 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441119 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119 RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100 R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080 R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_save_stack mm/kmsan/kmsan.c:261 [inline] kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469 kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344 kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362 __msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162 __nla_put lib/nlattr.c:744 [inline] nla_put+0x20a/0x2d0 lib/nlattr.c:802 nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466 nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline] ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807 rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979 netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170 kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186 __kmalloc+0x14c/0x4d0 mm/slub.c:3825 kmalloc include/linux/slab.h:551 [inline] __hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline] __hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline] __dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687 ip_mc_filter_add net/ipv4/igmp.c:1128 [inline] igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311 __ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444 ip_mc_inc_group net/ipv4/igmp.c:1453 [inline] ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775 inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522 notifier_call_chain kernel/notifier.c:93 [inline] __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401 __dev_notify_flags+0x3da/0x860 net/core/dev.c:1733 dev_change_flags+0x1ac/0x230 net/core/dev.c:7569 do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492 rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111 rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Bytes 36-37 of 105 are uninitialized Memory access of size 105 starts at ffff88819686c000 Data copied to user address 0000000020000380 Fixes: d83b06036048 ("net: add fdb generic dump routine") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-04 17:40:35 +00:00
if (dev->type != ARPHRD_ETHER)
return -EINVAL;
netif_addr_lock_bh(dev);
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
err = nlmsg_populate_fdb(skb, cb, dev, idx, &dev->uc);
if (err)
goto out;
err = nlmsg_populate_fdb(skb, cb, dev, idx, &dev->mc);
out:
netif_addr_unlock_bh(dev);
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
return err;
}
EXPORT_SYMBOL(ndo_dflt_fdb_dump);
static int valid_fdb_dump_strict(const struct nlmsghdr *nlh,
int *br_idx, int *brport_idx,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[NDA_MAX + 1];
struct ndmsg *ndm;
int err, i;
if (nlh->nlmsg_len < nlmsg_msg_size(sizeof(*ndm))) {
NL_SET_ERR_MSG(extack, "Invalid header for fdb dump request");
return -EINVAL;
}
ndm = nlmsg_data(nlh);
if (ndm->ndm_pad1 || ndm->ndm_pad2 || ndm->ndm_state ||
ndm->ndm_flags || ndm->ndm_type) {
NL_SET_ERR_MSG(extack, "Invalid values in header for fdb dump request");
return -EINVAL;
}
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated_strict(nlh, sizeof(struct ndmsg), tb,
NDA_MAX, NULL, extack);
if (err < 0)
return err;
*brport_idx = ndm->ndm_ifindex;
for (i = 0; i <= NDA_MAX; ++i) {
if (!tb[i])
continue;
switch (i) {
case NDA_IFINDEX:
if (nla_len(tb[i]) != sizeof(u32)) {
NL_SET_ERR_MSG(extack, "Invalid IFINDEX attribute in fdb dump request");
return -EINVAL;
}
*brport_idx = nla_get_u32(tb[NDA_IFINDEX]);
break;
case NDA_MASTER:
if (nla_len(tb[i]) != sizeof(u32)) {
NL_SET_ERR_MSG(extack, "Invalid MASTER attribute in fdb dump request");
return -EINVAL;
}
*br_idx = nla_get_u32(tb[NDA_MASTER]);
break;
default:
NL_SET_ERR_MSG(extack, "Unsupported attribute in fdb dump request");
return -EINVAL;
}
}
return 0;
}
static int valid_fdb_dump_legacy(const struct nlmsghdr *nlh,
int *br_idx, int *brport_idx,
struct netlink_ext_ack *extack)
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
{
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
struct nlattr *tb[IFLA_MAX+1];
int err;
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
rtnetlink: fix rtnl_fdb_dump() for ndmsg header Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg', which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh'). The problem is, the function bails out early if nlmsg_parse() fails, which does occur for iproute2 usage of 'struct ndmsg' because the payload length is shorter than the family header alone (as 'struct ifinfomsg' is assumed). This breaks backward compatibility with userspace -- nothing is sent back. Some examples with iproute2 and netlink library for go [1]: 1) $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent This one works, as it uses 'struct ifinfomsg'. fdb_show() @ iproute2/bridge/fdb.c """ .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)), ... if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...] """ 2) $ ip --family bridge neigh RTNETLINK answers: Invalid argument Dump terminated This one fails, as it uses 'struct ndmsg'. do_show_or_flush() @ iproute2/ip/ipneigh.c """ .n.nlmsg_type = RTM_GETNEIGH, .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)), """ 3) $ ./neighlist < no output > This one fails, as it uses 'struct ndmsg'-based. neighList() @ netlink/neigh_linux.go """ req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...] msg := Ndmsg{ """ The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails if the payload length (with the _actual_ family header) is less than the family header length alone (which is assumed, in parameter 'hdrlen'). This is true in the examples above with struct ndmsg, with size and payload length shorter than struct ifinfomsg. However, that commit just intends to fix something under the assumption the family header is indeed an 'struct ifinfomsg' - by preventing access to the payload as such (via 'ifm' pointer) if the payload length is not sufficient to actually contain it. The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump interface at par with brctl"), to support iproute2's 'bridge fdb' command (not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken. So, in order to unbreak the 'struct ndmsg' family headers and still allow 'struct ifinfomsg' to continue to work, check for the known message sizes used with 'struct ndmsg' in iproute2 (with zero or one attribute which is not used in this function anyway) then do not parse the data as ifinfomsg. Same examples with this patch applied (or revert/before the original fix): $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent $ ip --family bridge neigh dev ens3 lladdr 33:33:00:00:00:01 PERMANENT dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT $ ./neighlist netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068). References: [1] netlink library for go (test-case) https://github.com/vishvananda/netlink $ cat ~/go/src/neighlist/main.go package main import ("fmt"; "syscall"; "github.com/vishvananda/netlink") func main() { neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE) for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) } } $ export GOPATH=~/go $ go get github.com/vishvananda/netlink $ go build neighlist $ ~/go/src/neighlist/neighlist Thanks to David Ahern for suggestions to improve this patch. Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error") Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Reported-by: Aidan Obley <aobley@pivotal.io> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 01:46:40 +00:00
/* A hack to preserve kernel<->userspace interface.
* Before Linux v4.12 this code accepted ndmsg since iproute2 v3.3.0.
* However, ndmsg is shorter than ifinfomsg thus nlmsg_parse() bails.
* So, check for ndmsg with an optional u32 attribute (not used here).
* Fortunately these sizes don't conflict with the size of ifinfomsg
* with an optional attribute.
*/
if (nlmsg_len(nlh) != sizeof(struct ndmsg) &&
(nlmsg_len(nlh) != sizeof(struct ndmsg) +
rtnetlink: fix rtnl_fdb_dump() for ndmsg header Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg', which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh'). The problem is, the function bails out early if nlmsg_parse() fails, which does occur for iproute2 usage of 'struct ndmsg' because the payload length is shorter than the family header alone (as 'struct ifinfomsg' is assumed). This breaks backward compatibility with userspace -- nothing is sent back. Some examples with iproute2 and netlink library for go [1]: 1) $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent This one works, as it uses 'struct ifinfomsg'. fdb_show() @ iproute2/bridge/fdb.c """ .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)), ... if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...] """ 2) $ ip --family bridge neigh RTNETLINK answers: Invalid argument Dump terminated This one fails, as it uses 'struct ndmsg'. do_show_or_flush() @ iproute2/ip/ipneigh.c """ .n.nlmsg_type = RTM_GETNEIGH, .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)), """ 3) $ ./neighlist < no output > This one fails, as it uses 'struct ndmsg'-based. neighList() @ netlink/neigh_linux.go """ req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...] msg := Ndmsg{ """ The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails if the payload length (with the _actual_ family header) is less than the family header length alone (which is assumed, in parameter 'hdrlen'). This is true in the examples above with struct ndmsg, with size and payload length shorter than struct ifinfomsg. However, that commit just intends to fix something under the assumption the family header is indeed an 'struct ifinfomsg' - by preventing access to the payload as such (via 'ifm' pointer) if the payload length is not sufficient to actually contain it. The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump interface at par with brctl"), to support iproute2's 'bridge fdb' command (not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken. So, in order to unbreak the 'struct ndmsg' family headers and still allow 'struct ifinfomsg' to continue to work, check for the known message sizes used with 'struct ndmsg' in iproute2 (with zero or one attribute which is not used in this function anyway) then do not parse the data as ifinfomsg. Same examples with this patch applied (or revert/before the original fix): $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent $ ip --family bridge neigh dev ens3 lladdr 33:33:00:00:00:01 PERMANENT dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT $ ./neighlist netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068). References: [1] netlink library for go (test-case) https://github.com/vishvananda/netlink $ cat ~/go/src/neighlist/main.go package main import ("fmt"; "syscall"; "github.com/vishvananda/netlink") func main() { neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE) for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) } } $ export GOPATH=~/go $ go get github.com/vishvananda/netlink $ go build neighlist $ ~/go/src/neighlist/neighlist Thanks to David Ahern for suggestions to improve this patch. Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error") Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Reported-by: Aidan Obley <aobley@pivotal.io> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 01:46:40 +00:00
nla_attr_size(sizeof(u32)))) {
struct ifinfomsg *ifm;
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated(nlh, sizeof(struct ifinfomsg),
tb, IFLA_MAX, ifla_policy,
extack);
rtnetlink: fix rtnl_fdb_dump() for ndmsg header Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg', which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh'). The problem is, the function bails out early if nlmsg_parse() fails, which does occur for iproute2 usage of 'struct ndmsg' because the payload length is shorter than the family header alone (as 'struct ifinfomsg' is assumed). This breaks backward compatibility with userspace -- nothing is sent back. Some examples with iproute2 and netlink library for go [1]: 1) $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent This one works, as it uses 'struct ifinfomsg'. fdb_show() @ iproute2/bridge/fdb.c """ .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)), ... if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...] """ 2) $ ip --family bridge neigh RTNETLINK answers: Invalid argument Dump terminated This one fails, as it uses 'struct ndmsg'. do_show_or_flush() @ iproute2/ip/ipneigh.c """ .n.nlmsg_type = RTM_GETNEIGH, .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)), """ 3) $ ./neighlist < no output > This one fails, as it uses 'struct ndmsg'-based. neighList() @ netlink/neigh_linux.go """ req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...] msg := Ndmsg{ """ The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails if the payload length (with the _actual_ family header) is less than the family header length alone (which is assumed, in parameter 'hdrlen'). This is true in the examples above with struct ndmsg, with size and payload length shorter than struct ifinfomsg. However, that commit just intends to fix something under the assumption the family header is indeed an 'struct ifinfomsg' - by preventing access to the payload as such (via 'ifm' pointer) if the payload length is not sufficient to actually contain it. The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump interface at par with brctl"), to support iproute2's 'bridge fdb' command (not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken. So, in order to unbreak the 'struct ndmsg' family headers and still allow 'struct ifinfomsg' to continue to work, check for the known message sizes used with 'struct ndmsg' in iproute2 (with zero or one attribute which is not used in this function anyway) then do not parse the data as ifinfomsg. Same examples with this patch applied (or revert/before the original fix): $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent $ ip --family bridge neigh dev ens3 lladdr 33:33:00:00:00:01 PERMANENT dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT $ ./neighlist netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068). References: [1] netlink library for go (test-case) https://github.com/vishvananda/netlink $ cat ~/go/src/neighlist/main.go package main import ("fmt"; "syscall"; "github.com/vishvananda/netlink") func main() { neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE) for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) } } $ export GOPATH=~/go $ go get github.com/vishvananda/netlink $ go build neighlist $ ~/go/src/neighlist/neighlist Thanks to David Ahern for suggestions to improve this patch. Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error") Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Reported-by: Aidan Obley <aobley@pivotal.io> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 01:46:40 +00:00
if (err < 0) {
return -EINVAL;
} else if (err == 0) {
if (tb[IFLA_MASTER])
*br_idx = nla_get_u32(tb[IFLA_MASTER]);
rtnetlink: fix rtnl_fdb_dump() for ndmsg header Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg', which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh'). The problem is, the function bails out early if nlmsg_parse() fails, which does occur for iproute2 usage of 'struct ndmsg' because the payload length is shorter than the family header alone (as 'struct ifinfomsg' is assumed). This breaks backward compatibility with userspace -- nothing is sent back. Some examples with iproute2 and netlink library for go [1]: 1) $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent This one works, as it uses 'struct ifinfomsg'. fdb_show() @ iproute2/bridge/fdb.c """ .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)), ... if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...] """ 2) $ ip --family bridge neigh RTNETLINK answers: Invalid argument Dump terminated This one fails, as it uses 'struct ndmsg'. do_show_or_flush() @ iproute2/ip/ipneigh.c """ .n.nlmsg_type = RTM_GETNEIGH, .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)), """ 3) $ ./neighlist < no output > This one fails, as it uses 'struct ndmsg'-based. neighList() @ netlink/neigh_linux.go """ req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...] msg := Ndmsg{ """ The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails if the payload length (with the _actual_ family header) is less than the family header length alone (which is assumed, in parameter 'hdrlen'). This is true in the examples above with struct ndmsg, with size and payload length shorter than struct ifinfomsg. However, that commit just intends to fix something under the assumption the family header is indeed an 'struct ifinfomsg' - by preventing access to the payload as such (via 'ifm' pointer) if the payload length is not sufficient to actually contain it. The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump interface at par with brctl"), to support iproute2's 'bridge fdb' command (not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken. So, in order to unbreak the 'struct ndmsg' family headers and still allow 'struct ifinfomsg' to continue to work, check for the known message sizes used with 'struct ndmsg' in iproute2 (with zero or one attribute which is not used in this function anyway) then do not parse the data as ifinfomsg. Same examples with this patch applied (or revert/before the original fix): $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent $ ip --family bridge neigh dev ens3 lladdr 33:33:00:00:00:01 PERMANENT dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT $ ./neighlist netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068). References: [1] netlink library for go (test-case) https://github.com/vishvananda/netlink $ cat ~/go/src/neighlist/main.go package main import ("fmt"; "syscall"; "github.com/vishvananda/netlink") func main() { neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE) for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) } } $ export GOPATH=~/go $ go get github.com/vishvananda/netlink $ go build neighlist $ ~/go/src/neighlist/neighlist Thanks to David Ahern for suggestions to improve this patch. Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error") Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Reported-by: Aidan Obley <aobley@pivotal.io> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 01:46:40 +00:00
}
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
ifm = nlmsg_data(nlh);
*brport_idx = ifm->ifi_index;
rtnetlink: fix rtnl_fdb_dump() for ndmsg header Currently, rtnl_fdb_dump() assumes the family header is 'struct ifinfomsg', which is not always true -- 'struct ndmsg' is used by iproute2 ('ip neigh'). The problem is, the function bails out early if nlmsg_parse() fails, which does occur for iproute2 usage of 'struct ndmsg' because the payload length is shorter than the family header alone (as 'struct ifinfomsg' is assumed). This breaks backward compatibility with userspace -- nothing is sent back. Some examples with iproute2 and netlink library for go [1]: 1) $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent This one works, as it uses 'struct ifinfomsg'. fdb_show() @ iproute2/bridge/fdb.c """ .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ifinfomsg)), ... if (rtnl_dump_request(&rth, RTM_GETNEIGH, [...] """ 2) $ ip --family bridge neigh RTNETLINK answers: Invalid argument Dump terminated This one fails, as it uses 'struct ndmsg'. do_show_or_flush() @ iproute2/ip/ipneigh.c """ .n.nlmsg_type = RTM_GETNEIGH, .n.nlmsg_len = NLMSG_LENGTH(sizeof(struct ndmsg)), """ 3) $ ./neighlist < no output > This one fails, as it uses 'struct ndmsg'-based. neighList() @ netlink/neigh_linux.go """ req := h.newNetlinkRequest(unix.RTM_GETNEIGH, [...] msg := Ndmsg{ """ The actual breakage was introduced by commit 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error"), because nlmsg_parse() fails if the payload length (with the _actual_ family header) is less than the family header length alone (which is assumed, in parameter 'hdrlen'). This is true in the examples above with struct ndmsg, with size and payload length shorter than struct ifinfomsg. However, that commit just intends to fix something under the assumption the family header is indeed an 'struct ifinfomsg' - by preventing access to the payload as such (via 'ifm' pointer) if the payload length is not sufficient to actually contain it. The assumption was introduced by commit 5e6d24358799 ("bridge: netlink dump interface at par with brctl"), to support iproute2's 'bridge fdb' command (not 'ip neigh') which indeed uses 'struct ifinfomsg', thus is not broken. So, in order to unbreak the 'struct ndmsg' family headers and still allow 'struct ifinfomsg' to continue to work, check for the known message sizes used with 'struct ndmsg' in iproute2 (with zero or one attribute which is not used in this function anyway) then do not parse the data as ifinfomsg. Same examples with this patch applied (or revert/before the original fix): $ bridge fdb show 33:33:00:00:00:01 dev ens3 self permanent 01:00:5e:00:00:01 dev ens3 self permanent 33:33:ff:15:98:30 dev ens3 self permanent $ ip --family bridge neigh dev ens3 lladdr 33:33:00:00:00:01 PERMANENT dev ens3 lladdr 01:00:5e:00:00:01 PERMANENT dev ens3 lladdr 33:33:ff:15:98:30 PERMANENT $ ./neighlist netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0x0, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x1, 0x0, 0x5e, 0x0, 0x0, 0x1}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} netlink.Neigh{LinkIndex:2, Family:7, State:128, Type:0, Flags:2, IP:net.IP(nil), HardwareAddr:net.HardwareAddr{0x33, 0x33, 0xff, 0x15, 0x98, 0x30}, LLIPAddr:net.IP(nil), Vlan:0, VNI:0} Tested on mainline (v4.19-rc6) and net-next (3bd09b05b068). References: [1] netlink library for go (test-case) https://github.com/vishvananda/netlink $ cat ~/go/src/neighlist/main.go package main import ("fmt"; "syscall"; "github.com/vishvananda/netlink") func main() { neighs, _ := netlink.NeighList(0, syscall.AF_BRIDGE) for _, neigh := range neighs { fmt.Printf("%#v\n", neigh) } } $ export GOPATH=~/go $ go get github.com/vishvananda/netlink $ go build neighlist $ ~/go/src/neighlist/neighlist Thanks to David Ahern for suggestions to improve this patch. Fixes: 0ff50e83b512 ("net: rtnetlink: bail out from rtnl_fdb_dump() on parse error") Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Reported-by: Aidan Obley <aobley@pivotal.io> Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02 01:46:40 +00:00
}
return 0;
}
static int rtnl_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb)
{
struct net_device *dev;
struct net_device *br_dev = NULL;
const struct net_device_ops *ops = NULL;
const struct net_device_ops *cops = NULL;
struct net *net = sock_net(skb->sk);
struct hlist_head *head;
int brport_idx = 0;
int br_idx = 0;
int h, s_h;
int idx = 0, s_idx;
int err = 0;
int fidx = 0;
if (cb->strict_check)
err = valid_fdb_dump_strict(cb->nlh, &br_idx, &brport_idx,
cb->extack);
else
err = valid_fdb_dump_legacy(cb->nlh, &br_idx, &brport_idx,
cb->extack);
if (err < 0)
return err;
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
if (br_idx) {
br_dev = __dev_get_by_index(net, br_idx);
if (!br_dev)
return -ENODEV;
ops = br_dev->netdev_ops;
}
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
s_h = cb->args[0];
s_idx = cb->args[1];
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &net->dev_index_head[h];
hlist_for_each_entry(dev, head, index_hlist) {
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
if (brport_idx && (dev->ifindex != brport_idx))
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
continue;
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
if (!br_idx) { /* user did not specify a specific bridge */
if (netif_is_bridge_port(dev)) {
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
br_dev = netdev_master_upper_dev_get(dev);
cops = br_dev->netdev_ops;
}
} else {
if (dev != br_dev &&
!netif_is_bridge_port(dev))
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
continue;
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
if (br_dev != netdev_master_upper_dev_get(dev) &&
!netif_is_bridge_master(dev))
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
continue;
cops = ops;
}
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
if (idx < s_idx)
goto cont;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
if (netif_is_bridge_port(dev)) {
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
if (cops && cops->ndo_fdb_dump) {
err = cops->ndo_fdb_dump(skb, cb,
br_dev, dev,
&fidx);
if (err == -EMSGSIZE)
goto out;
}
}
bridge: netlink dump interface at par with brctl Actually better than brctl showmacs because we can filter by bridge port in the kernel. The current bridge netlink interface doesnt scale when you have many bridges each with large fdbs or even bridges with many bridge ports And now for the science non-fiction novel you have all been waiting for.. //lets see what bridge ports we have root@moja-1:/configs/may30-iprt/bridge# ./bridge link show 8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state disabled priority 32 cost 19 17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state disabled priority 32 cost 100 // show all.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //filter by bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent // bridge sw1 has no ports attached.. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1 //filter by port root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1 02:00:00:12:01:02 vlan 0 master br0 permanent 00:17:42:8a:b4:05 vlan 0 master br0 permanent 00:17:42:8a:b4:07 self permanent 33:33:00:00:00:01 self permanent // filter by port + bridge root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport sw1-p1 da:ac:46:27:d9:53 vlan 0 master br0 permanent 33:33:00:00:00:01 self permanent // for shits and giggles (as they say in New Brunswick), lets // change the mac that br0 uses // Note: a magical fdb entry with no brport is added ... root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address 02:00:00:12:01:04 // lets see if we can see the unicorn .. root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show 33:33:00:00:00:01 dev bond0 self permanent 33:33:00:00:00:01 dev dummy0 self permanent 33:33:00:00:00:01 dev ifb0 self permanent 33:33:00:00:00:01 dev ifb1 self permanent 33:33:00:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth0 self permanent 33:33:ff:22:01:01 dev eth0 self permanent 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 33:33:00:00:00:01 dev gretap0 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent //can we see it if we filter by bridge? root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent 00:17:42:8a:b4:07 dev eth1 self permanent 33:33:00:00:00:01 dev eth1 self permanent 02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent 33:33:00:00:00:01 dev sw1-p1 self permanent Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-10 11:01:59 +00:00
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
if (dev->netdev_ops->ndo_fdb_dump)
err = dev->netdev_ops->ndo_fdb_dump(skb, cb,
dev, NULL,
&fidx);
else
err = ndo_dflt_fdb_dump(skb, cb, dev, NULL,
&fidx);
if (err == -EMSGSIZE)
goto out;
cops = NULL;
/* reset fdb offset to 0 for rest of the interfaces */
cb->args[2] = 0;
fidx = 0;
cont:
idx++;
}
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
}
rtnetlink: fdb dump: optimize by saving last interface markers fdb dumps spanning multiple skb's currently restart from the first interface again for every skb. This results in unnecessary iterations on the already visited interfaces and their fdb entries. In large scale setups, we have seen this to slow down fdb dumps considerably. On a system with 30k macs we see fdb dumps spanning across more than 300 skbs. To fix the problem, this patch replaces the existing single fdb marker with three markers: netdev hash entries, netdevs and fdb index to continue where we left off instead of restarting from the first netdev. This is consistent with link dumps. In the process of fixing the performance issue, this patch also re-implements fix done by commit 472681d57a5d ("net: ndo_fdb_dump should report -EMSGSIZE to rtnl_fdb_dump") (with an internal fix from Wilson Kok) in the following ways: - change ndo_fdb_dump handlers to return error code instead of the last fdb index - use cb->args strictly for dump frag markers and not error codes. This is consistent with other dump functions. Below results were taken on a system with 1000 netdevs and 35085 fdb entries: before patch: $time bridge fdb show | wc -l 15065 real 1m11.791s user 0m0.070s sys 1m8.395s (existing code does not return all macs) after patch: $time bridge fdb show | wc -l 35085 real 0m2.017s user 0m0.113s sys 0m1.942s Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-31 04:56:45 +00:00
out:
cb->args[0] = h;
cb->args[1] = idx;
cb->args[2] = fidx;
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
return skb->len;
}
static int valid_fdb_get_strict(const struct nlmsghdr *nlh,
struct nlattr **tb, u8 *ndm_flags,
int *br_idx, int *brport_idx, u8 **addr,
u16 *vid, struct netlink_ext_ack *extack)
{
struct ndmsg *ndm;
int err, i;
if (nlh->nlmsg_len < nlmsg_msg_size(sizeof(*ndm))) {
NL_SET_ERR_MSG(extack, "Invalid header for fdb get request");
return -EINVAL;
}
ndm = nlmsg_data(nlh);
if (ndm->ndm_pad1 || ndm->ndm_pad2 || ndm->ndm_state ||
ndm->ndm_type) {
NL_SET_ERR_MSG(extack, "Invalid values in header for fdb get request");
return -EINVAL;
}
if (ndm->ndm_flags & ~(NTF_MASTER | NTF_SELF)) {
NL_SET_ERR_MSG(extack, "Invalid flags in header for fdb get request");
return -EINVAL;
}
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated_strict(nlh, sizeof(struct ndmsg), tb,
NDA_MAX, nda_policy, extack);
if (err < 0)
return err;
*ndm_flags = ndm->ndm_flags;
*brport_idx = ndm->ndm_ifindex;
for (i = 0; i <= NDA_MAX; ++i) {
if (!tb[i])
continue;
switch (i) {
case NDA_MASTER:
*br_idx = nla_get_u32(tb[i]);
break;
case NDA_LLADDR:
if (nla_len(tb[i]) != ETH_ALEN) {
NL_SET_ERR_MSG(extack, "Invalid address in fdb get request");
return -EINVAL;
}
*addr = nla_data(tb[i]);
break;
case NDA_VLAN:
err = fdb_vid_parse(tb[i], vid, extack);
if (err)
return err;
break;
case NDA_VNI:
break;
default:
NL_SET_ERR_MSG(extack, "Unsupported attribute in fdb get request");
return -EINVAL;
}
}
return 0;
}
static int rtnl_fdb_get(struct sk_buff *in_skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net_device *dev = NULL, *br_dev = NULL;
const struct net_device_ops *ops = NULL;
struct net *net = sock_net(in_skb->sk);
struct nlattr *tb[NDA_MAX + 1];
struct sk_buff *skb;
int brport_idx = 0;
u8 ndm_flags = 0;
int br_idx = 0;
u8 *addr = NULL;
u16 vid = 0;
int err;
err = valid_fdb_get_strict(nlh, tb, &ndm_flags, &br_idx,
&brport_idx, &addr, &vid, extack);
if (err < 0)
return err;
if (!addr) {
NL_SET_ERR_MSG(extack, "Missing lookup address for fdb get request");
return -EINVAL;
}
if (brport_idx) {
dev = __dev_get_by_index(net, brport_idx);
if (!dev) {
NL_SET_ERR_MSG(extack, "Unknown device ifindex");
return -ENODEV;
}
}
if (br_idx) {
if (dev) {
NL_SET_ERR_MSG(extack, "Master and device are mutually exclusive");
return -EINVAL;
}
br_dev = __dev_get_by_index(net, br_idx);
if (!br_dev) {
NL_SET_ERR_MSG(extack, "Invalid master ifindex");
return -EINVAL;
}
ops = br_dev->netdev_ops;
}
if (dev) {
if (!ndm_flags || (ndm_flags & NTF_MASTER)) {
if (!netif_is_bridge_port(dev)) {
NL_SET_ERR_MSG(extack, "Device is not a bridge port");
return -EINVAL;
}
br_dev = netdev_master_upper_dev_get(dev);
if (!br_dev) {
NL_SET_ERR_MSG(extack, "Master of device not found");
return -EINVAL;
}
ops = br_dev->netdev_ops;
} else {
if (!(ndm_flags & NTF_SELF)) {
NL_SET_ERR_MSG(extack, "Missing NTF_SELF");
return -EINVAL;
}
ops = dev->netdev_ops;
}
}
if (!br_dev && !dev) {
NL_SET_ERR_MSG(extack, "No device specified");
return -ENODEV;
}
if (!ops || !ops->ndo_fdb_get) {
NL_SET_ERR_MSG(extack, "Fdb get operation not supported by device");
return -EOPNOTSUPP;
}
skb = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
if (!skb)
return -ENOBUFS;
if (br_dev)
dev = br_dev;
err = ops->ndo_fdb_get(skb, tb, dev, addr, vid,
NETLINK_CB(in_skb).portid,
nlh->nlmsg_seq, extack);
if (err)
goto out;
return rtnl_unicast(skb, net, NETLINK_CB(in_skb).portid);
out:
kfree_skb(skb);
return err;
}
static int brport_nla_put_flag(struct sk_buff *skb, u32 flags, u32 mask,
unsigned int attrnum, unsigned int flag)
{
if (mask & flag)
return nla_put_u8(skb, attrnum, !!(flags & flag));
return 0;
}
int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq,
struct net_device *dev, u16 mode,
u32 flags, u32 mask, int nlflags,
u32 filter_mask,
int (*vlan_fill)(struct sk_buff *skb,
struct net_device *dev,
u32 filter_mask))
{
struct nlmsghdr *nlh;
struct ifinfomsg *ifm;
struct nlattr *br_afspec;
struct nlattr *protinfo;
u8 operstate = netif_running(dev) ? dev->operstate : IF_OPER_DOWN;
struct net_device *br_dev = netdev_master_upper_dev_get(dev);
int err = 0;
nlh = nlmsg_put(skb, pid, seq, RTM_NEWLINK, sizeof(*ifm), nlflags);
if (nlh == NULL)
return -EMSGSIZE;
ifm = nlmsg_data(nlh);
ifm->ifi_family = AF_BRIDGE;
ifm->__ifi_pad = 0;
ifm->ifi_type = dev->type;
ifm->ifi_index = dev->ifindex;
ifm->ifi_flags = dev_get_flags(dev);
ifm->ifi_change = 0;
if (nla_put_string(skb, IFLA_IFNAME, dev->name) ||
nla_put_u32(skb, IFLA_MTU, dev->mtu) ||
nla_put_u8(skb, IFLA_OPERSTATE, operstate) ||
(br_dev &&
nla_put_u32(skb, IFLA_MASTER, br_dev->ifindex)) ||
(dev->addr_len &&
nla_put(skb, IFLA_ADDRESS, dev->addr_len, dev->dev_addr)) ||
(dev->ifindex != dev_get_iflink(dev) &&
nla_put_u32(skb, IFLA_LINK, dev_get_iflink(dev))))
goto nla_put_failure;
br_afspec = nla_nest_start_noflag(skb, IFLA_AF_SPEC);
if (!br_afspec)
goto nla_put_failure;
if (nla_put_u16(skb, IFLA_BRIDGE_FLAGS, BRIDGE_FLAGS_SELF)) {
nla_nest_cancel(skb, br_afspec);
goto nla_put_failure;
}
if (mode != BRIDGE_MODE_UNDEF) {
if (nla_put_u16(skb, IFLA_BRIDGE_MODE, mode)) {
nla_nest_cancel(skb, br_afspec);
goto nla_put_failure;
}
}
if (vlan_fill) {
err = vlan_fill(skb, dev, filter_mask);
if (err) {
nla_nest_cancel(skb, br_afspec);
goto nla_put_failure;
}
}
nla_nest_end(skb, br_afspec);
protinfo = nla_nest_start(skb, IFLA_PROTINFO);
if (!protinfo)
goto nla_put_failure;
if (brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_MODE, BR_HAIRPIN_MODE) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_GUARD, BR_BPDU_GUARD) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_FAST_LEAVE,
BR_MULTICAST_FAST_LEAVE) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_PROTECT, BR_ROOT_BLOCK) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_LEARNING, BR_LEARNING) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_LEARNING_SYNC, BR_LEARNING_SYNC) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_UNICAST_FLOOD, BR_FLOOD) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_PROXYARP, BR_PROXYARP) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) ||
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_BCAST_FLOOD, BR_BCAST_FLOOD)) {
nla_nest_cancel(skb, protinfo);
goto nla_put_failure;
}
nla_nest_end(skb, protinfo);
netlink: make nlmsg_end() and genlmsg_end() void Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16 21:09:00 +00:00
nlmsg_end(skb, nlh);
return 0;
nla_put_failure:
nlmsg_cancel(skb, nlh);
return err ? err : -EMSGSIZE;
}
EXPORT_SYMBOL_GPL(ndo_dflt_bridge_getlink);
static int valid_bridge_getlink_req(const struct nlmsghdr *nlh,
bool strict_check, u32 *filter_mask,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[IFLA_MAX+1];
int err, i;
if (strict_check) {
struct ifinfomsg *ifm;
if (nlh->nlmsg_len < nlmsg_msg_size(sizeof(*ifm))) {
NL_SET_ERR_MSG(extack, "Invalid header for bridge link dump");
return -EINVAL;
}
ifm = nlmsg_data(nlh);
if (ifm->__ifi_pad || ifm->ifi_type || ifm->ifi_flags ||
ifm->ifi_change || ifm->ifi_index) {
NL_SET_ERR_MSG(extack, "Invalid values in header for bridge link dump request");
return -EINVAL;
}
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated_strict(nlh,
sizeof(struct ifinfomsg),
tb, IFLA_MAX, ifla_policy,
extack);
} else {
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 12:07:28 +00:00
err = nlmsg_parse_deprecated(nlh, sizeof(struct ifinfomsg),
tb, IFLA_MAX, ifla_policy,
extack);
}
if (err < 0)
return err;
/* new attributes should only be added with strict checking */
for (i = 0; i <= IFLA_MAX; ++i) {
if (!tb[i])
continue;
switch (i) {
case IFLA_EXT_MASK:
*filter_mask = nla_get_u32(tb[i]);
break;
default:
if (strict_check) {
NL_SET_ERR_MSG(extack, "Unsupported attribute in bridge link dump request");
return -EINVAL;
}
}
}
return 0;
}
static int rtnl_bridge_getlink(struct sk_buff *skb, struct netlink_callback *cb)
{
const struct nlmsghdr *nlh = cb->nlh;
struct net *net = sock_net(skb->sk);
struct net_device *dev;
int idx = 0;
u32 portid = NETLINK_CB(cb->skb).portid;
u32 seq = nlh->nlmsg_seq;
u32 filter_mask = 0;
int err;
err = valid_bridge_getlink_req(nlh, cb->strict_check, &filter_mask,
cb->extack);
if (err < 0 && cb->strict_check)
return err;
rcu_read_lock();
for_each_netdev_rcu(net, dev) {
const struct net_device_ops *ops = dev->netdev_ops;
struct net_device *br_dev = netdev_master_upper_dev_get(dev);
if (br_dev && br_dev->netdev_ops->ndo_bridge_getlink) {
if (idx >= cb->args[0]) {
err = br_dev->netdev_ops->ndo_bridge_getlink(
skb, portid, seq, dev,
filter_mask, NLM_F_MULTI);
if (err < 0 && err != -EOPNOTSUPP) {
if (likely(skb->len))
break;
goto out_err;
}
}
idx++;
}
if (ops->ndo_bridge_getlink) {
if (idx >= cb->args[0]) {
err = ops->ndo_bridge_getlink(skb, portid,
seq, dev,
filter_mask,
NLM_F_MULTI);
if (err < 0 && err != -EOPNOTSUPP) {
if (likely(skb->len))
break;
goto out_err;
}
}
idx++;
}
}
err = skb->len;
out_err:
rcu_read_unlock();
cb->args[0] = idx;
return err;
}
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
static inline size_t bridge_nlmsg_size(void)
{
return NLMSG_ALIGN(sizeof(struct ifinfomsg))
+ nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
+ nla_total_size(MAX_ADDR_LEN) /* IFLA_ADDRESS */
+ nla_total_size(sizeof(u32)) /* IFLA_MASTER */
+ nla_total_size(sizeof(u32)) /* IFLA_MTU */
+ nla_total_size(sizeof(u32)) /* IFLA_LINK */
+ nla_total_size(sizeof(u32)) /* IFLA_OPERSTATE */
+ nla_total_size(sizeof(u8)) /* IFLA_PROTINFO */
+ nla_total_size(sizeof(struct nlattr)) /* IFLA_AF_SPEC */
+ nla_total_size(sizeof(u16)) /* IFLA_BRIDGE_FLAGS */
+ nla_total_size(sizeof(u16)); /* IFLA_BRIDGE_MODE */
}
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
static int rtnl_bridge_notify(struct net_device *dev)
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
{
struct net *net = dev_net(dev);
struct sk_buff *skb;
int err = -EOPNOTSUPP;
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
if (!dev->netdev_ops->ndo_bridge_getlink)
return 0;
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
skb = nlmsg_new(bridge_nlmsg_size(), GFP_ATOMIC);
if (!skb) {
err = -ENOMEM;
goto errout;
}
err = dev->netdev_ops->ndo_bridge_getlink(skb, 0, 0, dev, 0, 0);
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
if (err < 0)
goto errout;
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
/* Notification info is only filled for bridge ports, not the bridge
* device itself. Therefore, a zero notification length is valid and
* should not result in an error.
*/
if (!skb->len)
goto errout;
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL, GFP_ATOMIC);
return 0;
errout:
WARN_ON(err == -EMSGSIZE);
kfree_skb(skb);
if (err)
rtnl_set_sk_err(net, RTNLGRP_LINK, err);
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
return err;
}
static int rtnl_bridge_setlink(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
struct ifinfomsg *ifm;
struct net_device *dev;
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
struct nlattr *br_spec, *attr = NULL;
int rem, err = -EOPNOTSUPP;
u16 flags = 0;
bool have_flags = false;
if (nlmsg_len(nlh) < sizeof(*ifm))
return -EINVAL;
ifm = nlmsg_data(nlh);
if (ifm->ifi_family != AF_BRIDGE)
return -EPFNOSUPPORT;
dev = __dev_get_by_index(net, ifm->ifi_index);
if (!dev) {
NL_SET_ERR_MSG(extack, "unknown ifindex");
return -ENODEV;
}
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
if (br_spec) {
nla_for_each_nested(attr, br_spec, rem) {
if (nla_type(attr) == IFLA_BRIDGE_FLAGS && !have_flags) {
if (nla_len(attr) < sizeof(flags))
return -EINVAL;
have_flags = true;
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
flags = nla_get_u16(attr);
}
if (nla_type(attr) == IFLA_BRIDGE_MODE) {
if (nla_len(attr) < sizeof(u16))
return -EINVAL;
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
}
}
}
if (!flags || (flags & BRIDGE_FLAGS_MASTER)) {
struct net_device *br_dev = netdev_master_upper_dev_get(dev);
if (!br_dev || !br_dev->netdev_ops->ndo_bridge_setlink) {
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
err = -EOPNOTSUPP;
goto out;
}
err = br_dev->netdev_ops->ndo_bridge_setlink(dev, nlh, flags,
extack);
if (err)
goto out;
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
flags &= ~BRIDGE_FLAGS_MASTER;
}
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
if ((flags & BRIDGE_FLAGS_SELF)) {
if (!dev->netdev_ops->ndo_bridge_setlink)
err = -EOPNOTSUPP;
else
err = dev->netdev_ops->ndo_bridge_setlink(dev, nlh,
flags,
extack);
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
if (!err) {
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
flags &= ~BRIDGE_FLAGS_SELF;
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
/* Generate event to notify upper layer of bridge
* change
*/
err = rtnl_bridge_notify(dev);
}
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
}
if (have_flags)
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 08:13:03 +00:00
memcpy(nla_data(attr), &flags, sizeof(flags));
out:
return err;
}
static int rtnl_bridge_dellink(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
struct ifinfomsg *ifm;
struct net_device *dev;
struct nlattr *br_spec, *attr = NULL;
int rem, err = -EOPNOTSUPP;
u16 flags = 0;
bool have_flags = false;
if (nlmsg_len(nlh) < sizeof(*ifm))
return -EINVAL;
ifm = nlmsg_data(nlh);
if (ifm->ifi_family != AF_BRIDGE)
return -EPFNOSUPPORT;
dev = __dev_get_by_index(net, ifm->ifi_index);
if (!dev) {
NL_SET_ERR_MSG(extack, "unknown ifindex");
return -ENODEV;
}
br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
if (br_spec) {
nla_for_each_nested(attr, br_spec, rem) {
if (nla_type(attr) == IFLA_BRIDGE_FLAGS) {
if (nla_len(attr) < sizeof(flags))
return -EINVAL;
have_flags = true;
flags = nla_get_u16(attr);
break;
}
}
}
if (!flags || (flags & BRIDGE_FLAGS_MASTER)) {
struct net_device *br_dev = netdev_master_upper_dev_get(dev);
if (!br_dev || !br_dev->netdev_ops->ndo_bridge_dellink) {
err = -EOPNOTSUPP;
goto out;
}
err = br_dev->netdev_ops->ndo_bridge_dellink(dev, nlh, flags);
if (err)
goto out;
flags &= ~BRIDGE_FLAGS_MASTER;
}
if ((flags & BRIDGE_FLAGS_SELF)) {
if (!dev->netdev_ops->ndo_bridge_dellink)
err = -EOPNOTSUPP;
else
err = dev->netdev_ops->ndo_bridge_dellink(dev, nlh,
flags);
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
if (!err) {
flags &= ~BRIDGE_FLAGS_SELF;
bridge: fix setlink/dellink notifications problems with bridge getlink/setlink notifications today: - bridge setlink generates two notifications to userspace - one from the bridge driver - one from rtnetlink.c (rtnl_bridge_notify) - dellink generates one notification from rtnetlink.c. Which means bridge setlink and dellink notifications are not consistent - Looking at the code it appears, If both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF were set, the size calculation in rtnl_bridge_notify can be wrong. Example: if you set both BRIDGE_FLAGS_MASTER and BRIDGE_FLAGS_SELF in a setlink request to rocker dev, rtnl_bridge_notify will allocate skb for one set of bridge attributes, but, both the bridge driver and rocker dev will try to add attributes resulting in twice the number of attributes being added to the skb. (rocker dev calls ndo_dflt_bridge_getlink) There are multiple options: 1) Generate one notification including all attributes from master and self: But, I don't think it will work, because both master and self may use the same attributes/policy. Cannot pack the same set of attributes in a single notification from both master and slave (duplicate attributes). 2) Generate one notification from master and the other notification from self (This seems to be ideal): For master: the master driver will send notification (bridge in this example) For self: the self driver will send notification (rocker in the above example. It can use helpers from rtnetlink.c to do so. Like the ndo_dflt_bridge_getlink api). This patch implements 2) (leaving the 'rtnl_bridge_notify' around to be used with 'self'). v1->v2 : - rtnl_bridge_notify is now called only for self, so, remove 'BRIDGE_FLAGS_SELF' check and cleanup a few things - rtnl_bridge_dellink used to always send a RTM_NEWLINK msg earlier. So, I have changed the notification from br_dellink to go as RTM_NEWLINK Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 04:02:25 +00:00
/* Generate event to notify upper layer of bridge
* change
*/
err = rtnl_bridge_notify(dev);
}
}
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
out:
return err;
}
static bool stats_attr_valid(unsigned int mask, int attrid, int idxattr)
{
return (mask & IFLA_STATS_FILTER_BIT(attrid)) &&
(!idxattr || idxattr == attrid);
}
static bool
rtnl_offload_xstats_have_ndo(const struct net_device *dev, int attr_id)
{
return dev->netdev_ops &&
dev->netdev_ops->ndo_has_offload_stats &&
dev->netdev_ops->ndo_get_offload_stats &&
dev->netdev_ops->ndo_has_offload_stats(dev, attr_id);
}
static unsigned int
rtnl_offload_xstats_get_size_ndo(const struct net_device *dev, int attr_id)
{
return rtnl_offload_xstats_have_ndo(dev, attr_id) ?
sizeof(struct rtnl_link_stats64) : 0;
}
static int
rtnl_offload_xstats_fill_ndo(struct net_device *dev, int attr_id,
struct sk_buff *skb)
{
unsigned int size = rtnl_offload_xstats_get_size_ndo(dev, attr_id);
struct nlattr *attr = NULL;
void *attr_data;
int err;
if (!size)
return -ENODATA;
attr = nla_reserve_64bit(skb, attr_id, size,
IFLA_OFFLOAD_XSTATS_UNSPEC);
if (!attr)
return -EMSGSIZE;
attr_data = nla_data(attr);
memset(attr_data, 0, size);
err = dev->netdev_ops->ndo_get_offload_stats(attr_id, dev, attr_data);
if (err)
return err;
return 0;
}
static unsigned int
rtnl_offload_xstats_get_size_stats(const struct net_device *dev,
enum netdev_offload_xstats_type type)
{
bool enabled = netdev_offload_xstats_enabled(dev, type);
return enabled ? sizeof(struct rtnl_hw_stats64) : 0;
}
struct rtnl_offload_xstats_request_used {
bool request;
bool used;
};
static int
rtnl_offload_xstats_get_stats(struct net_device *dev,
enum netdev_offload_xstats_type type,
struct rtnl_offload_xstats_request_used *ru,
struct rtnl_hw_stats64 *stats,
struct netlink_ext_ack *extack)
{
bool request;
bool used;
int err;
request = netdev_offload_xstats_enabled(dev, type);
if (!request) {
used = false;
goto out;
}
err = netdev_offload_xstats_get(dev, type, stats, &used, extack);
if (err)
return err;
out:
if (ru) {
ru->request = request;
ru->used = used;
}
return 0;
}
static int
rtnl_offload_xstats_fill_hw_s_info_one(struct sk_buff *skb, int attr_id,
struct rtnl_offload_xstats_request_used *ru)
{
struct nlattr *nest;
nest = nla_nest_start(skb, attr_id);
if (!nest)
return -EMSGSIZE;
if (nla_put_u8(skb, IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST, ru->request))
goto nla_put_failure;
if (nla_put_u8(skb, IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED, ru->used))
goto nla_put_failure;
nla_nest_end(skb, nest);
return 0;
nla_put_failure:
nla_nest_cancel(skb, nest);
return -EMSGSIZE;
}
static int
rtnl_offload_xstats_fill_hw_s_info(struct sk_buff *skb, struct net_device *dev,
struct netlink_ext_ack *extack)
{
enum netdev_offload_xstats_type t_l3 = NETDEV_OFFLOAD_XSTATS_TYPE_L3;
struct rtnl_offload_xstats_request_used ru_l3;
struct nlattr *nest;
int err;
err = rtnl_offload_xstats_get_stats(dev, t_l3, &ru_l3, NULL, extack);
if (err)
return err;
nest = nla_nest_start(skb, IFLA_OFFLOAD_XSTATS_HW_S_INFO);
if (!nest)
return -EMSGSIZE;
if (rtnl_offload_xstats_fill_hw_s_info_one(skb,
IFLA_OFFLOAD_XSTATS_L3_STATS,
&ru_l3))
goto nla_put_failure;
nla_nest_end(skb, nest);
return 0;
nla_put_failure:
nla_nest_cancel(skb, nest);
return -EMSGSIZE;
}
static int rtnl_offload_xstats_fill(struct sk_buff *skb, struct net_device *dev,
int *prividx, u32 off_filter_mask,
struct netlink_ext_ack *extack)
{
enum netdev_offload_xstats_type t_l3 = NETDEV_OFFLOAD_XSTATS_TYPE_L3;
int attr_id_hw_s_info = IFLA_OFFLOAD_XSTATS_HW_S_INFO;
int attr_id_l3_stats = IFLA_OFFLOAD_XSTATS_L3_STATS;
int attr_id_cpu_hit = IFLA_OFFLOAD_XSTATS_CPU_HIT;
bool have_data = false;
int err;
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
if (*prividx <= attr_id_cpu_hit &&
(off_filter_mask &
IFLA_STATS_FILTER_BIT(attr_id_cpu_hit))) {
err = rtnl_offload_xstats_fill_ndo(dev, attr_id_cpu_hit, skb);
if (!err) {
have_data = true;
} else if (err != -ENODATA) {
*prividx = attr_id_cpu_hit;
return err;
}
}
if (*prividx <= attr_id_hw_s_info &&
(off_filter_mask & IFLA_STATS_FILTER_BIT(attr_id_hw_s_info))) {
*prividx = attr_id_hw_s_info;
err = rtnl_offload_xstats_fill_hw_s_info(skb, dev, extack);
if (err)
return err;
have_data = true;
*prividx = 0;
}
if (*prividx <= attr_id_l3_stats &&
(off_filter_mask & IFLA_STATS_FILTER_BIT(attr_id_l3_stats))) {
unsigned int size_l3;
struct nlattr *attr;
*prividx = attr_id_l3_stats;
size_l3 = rtnl_offload_xstats_get_size_stats(dev, t_l3);
if (!size_l3)
goto skip_l3_stats;
attr = nla_reserve_64bit(skb, attr_id_l3_stats, size_l3,
IFLA_OFFLOAD_XSTATS_UNSPEC);
if (!attr)
return -EMSGSIZE;
err = rtnl_offload_xstats_get_stats(dev, t_l3, NULL,
nla_data(attr), extack);
if (err)
return err;
have_data = true;
skip_l3_stats:
*prividx = 0;
}
if (!have_data)
return -ENODATA;
*prividx = 0;
return 0;
}
static unsigned int
rtnl_offload_xstats_get_size_hw_s_info_one(const struct net_device *dev,
enum netdev_offload_xstats_type type)
{
bool enabled = netdev_offload_xstats_enabled(dev, type);
return nla_total_size(0) +
/* IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST */
nla_total_size(sizeof(u8)) +
/* IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED */
(enabled ? nla_total_size(sizeof(u8)) : 0) +
0;
}
static unsigned int
rtnl_offload_xstats_get_size_hw_s_info(const struct net_device *dev)
{
enum netdev_offload_xstats_type t_l3 = NETDEV_OFFLOAD_XSTATS_TYPE_L3;
return nla_total_size(0) +
/* IFLA_OFFLOAD_XSTATS_L3_STATS */
rtnl_offload_xstats_get_size_hw_s_info_one(dev, t_l3) +
0;
}
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
static int rtnl_offload_xstats_get_size(const struct net_device *dev,
u32 off_filter_mask)
{
enum netdev_offload_xstats_type t_l3 = NETDEV_OFFLOAD_XSTATS_TYPE_L3;
int attr_id_cpu_hit = IFLA_OFFLOAD_XSTATS_CPU_HIT;
int nla_size = 0;
int size;
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
if (off_filter_mask &
IFLA_STATS_FILTER_BIT(attr_id_cpu_hit)) {
size = rtnl_offload_xstats_get_size_ndo(dev, attr_id_cpu_hit);
nla_size += nla_total_size_64bit(size);
}
if (off_filter_mask &
IFLA_STATS_FILTER_BIT(IFLA_OFFLOAD_XSTATS_HW_S_INFO))
nla_size += rtnl_offload_xstats_get_size_hw_s_info(dev);
if (off_filter_mask &
IFLA_STATS_FILTER_BIT(IFLA_OFFLOAD_XSTATS_L3_STATS)) {
size = rtnl_offload_xstats_get_size_stats(dev, t_l3);
nla_size += nla_total_size_64bit(size);
}
if (nla_size != 0)
nla_size += nla_total_size(0);
return nla_size;
}
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
struct rtnl_stats_dump_filters {
/* mask[0] filters outer attributes. Then individual nests have their
* filtering mask at the index of the nested attribute.
*/
u32 mask[IFLA_STATS_MAX + 1];
};
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
static int rtnl_fill_statsinfo(struct sk_buff *skb, struct net_device *dev,
int type, u32 pid, u32 seq, u32 change,
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
unsigned int flags,
const struct rtnl_stats_dump_filters *filters,
int *idxattr, int *prividx,
struct netlink_ext_ack *extack)
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
{
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
unsigned int filter_mask = filters->mask[0];
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
struct if_stats_msg *ifsm;
struct nlmsghdr *nlh;
struct nlattr *attr;
int s_prividx = *prividx;
int err;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
ASSERT_RTNL();
nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ifsm), flags);
if (!nlh)
return -EMSGSIZE;
ifsm = nlmsg_data(nlh);
ifsm->family = PF_UNSPEC;
ifsm->pad1 = 0;
ifsm->pad2 = 0;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
ifsm->ifindex = dev->ifindex;
ifsm->filter_mask = filter_mask;
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_64, *idxattr)) {
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
struct rtnl_link_stats64 *sp;
attr = nla_reserve_64bit(skb, IFLA_STATS_LINK_64,
sizeof(struct rtnl_link_stats64),
IFLA_STATS_UNSPEC);
if (!attr) {
err = -EMSGSIZE;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
goto nla_put_failure;
}
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
sp = nla_data(attr);
dev_get_stats(dev, sp);
}
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_XSTATS, *idxattr)) {
const struct rtnl_link_ops *ops = dev->rtnl_link_ops;
if (ops && ops->fill_linkxstats) {
*idxattr = IFLA_STATS_LINK_XSTATS;
attr = nla_nest_start_noflag(skb,
IFLA_STATS_LINK_XSTATS);
if (!attr) {
err = -EMSGSIZE;
goto nla_put_failure;
}
err = ops->fill_linkxstats(skb, dev, prividx, *idxattr);
nla_nest_end(skb, attr);
if (err)
goto nla_put_failure;
*idxattr = 0;
}
}
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_XSTATS_SLAVE,
*idxattr)) {
const struct rtnl_link_ops *ops = NULL;
const struct net_device *master;
master = netdev_master_upper_dev_get(dev);
if (master)
ops = master->rtnl_link_ops;
if (ops && ops->fill_linkxstats) {
*idxattr = IFLA_STATS_LINK_XSTATS_SLAVE;
attr = nla_nest_start_noflag(skb,
IFLA_STATS_LINK_XSTATS_SLAVE);
if (!attr) {
err = -EMSGSIZE;
goto nla_put_failure;
}
err = ops->fill_linkxstats(skb, dev, prividx, *idxattr);
nla_nest_end(skb, attr);
if (err)
goto nla_put_failure;
*idxattr = 0;
}
}
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_OFFLOAD_XSTATS,
*idxattr)) {
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
u32 off_filter_mask;
off_filter_mask = filters->mask[IFLA_STATS_LINK_OFFLOAD_XSTATS];
*idxattr = IFLA_STATS_LINK_OFFLOAD_XSTATS;
attr = nla_nest_start_noflag(skb,
IFLA_STATS_LINK_OFFLOAD_XSTATS);
if (!attr) {
err = -EMSGSIZE;
goto nla_put_failure;
}
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
err = rtnl_offload_xstats_fill(skb, dev, prividx,
off_filter_mask, extack);
if (err == -ENODATA)
nla_nest_cancel(skb, attr);
else
nla_nest_end(skb, attr);
if (err && err != -ENODATA)
goto nla_put_failure;
*idxattr = 0;
}
if (stats_attr_valid(filter_mask, IFLA_STATS_AF_SPEC, *idxattr)) {
struct rtnl_af_ops *af_ops;
*idxattr = IFLA_STATS_AF_SPEC;
attr = nla_nest_start_noflag(skb, IFLA_STATS_AF_SPEC);
if (!attr) {
err = -EMSGSIZE;
goto nla_put_failure;
}
rcu_read_lock();
list_for_each_entry_rcu(af_ops, &rtnl_af_ops, list) {
if (af_ops->fill_stats_af) {
struct nlattr *af;
af = nla_nest_start_noflag(skb,
af_ops->family);
if (!af) {
rcu_read_unlock();
err = -EMSGSIZE;
goto nla_put_failure;
}
err = af_ops->fill_stats_af(skb, dev);
if (err == -ENODATA) {
nla_nest_cancel(skb, af);
} else if (err < 0) {
rcu_read_unlock();
goto nla_put_failure;
}
nla_nest_end(skb, af);
}
}
rcu_read_unlock();
nla_nest_end(skb, attr);
*idxattr = 0;
}
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
nlmsg_end(skb, nlh);
return 0;
nla_put_failure:
/* not a multi message or no progress mean a real error */
if (!(flags & NLM_F_MULTI) || s_prividx == *prividx)
nlmsg_cancel(skb, nlh);
else
nlmsg_end(skb, nlh);
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
return err;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
}
static size_t if_nlmsg_stats_size(const struct net_device *dev,
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
const struct rtnl_stats_dump_filters *filters)
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
{
size_t size = NLMSG_ALIGN(sizeof(struct if_stats_msg));
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
unsigned int filter_mask = filters->mask[0];
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_64, 0))
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
size += nla_total_size_64bit(sizeof(struct rtnl_link_stats64));
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_XSTATS, 0)) {
const struct rtnl_link_ops *ops = dev->rtnl_link_ops;
int attr = IFLA_STATS_LINK_XSTATS;
if (ops && ops->get_linkxstats_size) {
size += nla_total_size(ops->get_linkxstats_size(dev,
attr));
/* for IFLA_STATS_LINK_XSTATS */
size += nla_total_size(0);
}
}
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_XSTATS_SLAVE, 0)) {
struct net_device *_dev = (struct net_device *)dev;
const struct rtnl_link_ops *ops = NULL;
const struct net_device *master;
/* netdev_master_upper_dev_get can't take const */
master = netdev_master_upper_dev_get(_dev);
if (master)
ops = master->rtnl_link_ops;
if (ops && ops->get_linkxstats_size) {
int attr = IFLA_STATS_LINK_XSTATS_SLAVE;
size += nla_total_size(ops->get_linkxstats_size(dev,
attr));
/* for IFLA_STATS_LINK_XSTATS_SLAVE */
size += nla_total_size(0);
}
}
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
if (stats_attr_valid(filter_mask, IFLA_STATS_LINK_OFFLOAD_XSTATS, 0)) {
u32 off_filter_mask;
off_filter_mask = filters->mask[IFLA_STATS_LINK_OFFLOAD_XSTATS];
size += rtnl_offload_xstats_get_size(dev, off_filter_mask);
}
if (stats_attr_valid(filter_mask, IFLA_STATS_AF_SPEC, 0)) {
struct rtnl_af_ops *af_ops;
/* for IFLA_STATS_AF_SPEC */
size += nla_total_size(0);
rcu_read_lock();
list_for_each_entry_rcu(af_ops, &rtnl_af_ops, list) {
if (af_ops->get_stats_af_size) {
size += nla_total_size(
af_ops->get_stats_af_size(dev));
/* for AF_* */
size += nla_total_size(0);
}
}
rcu_read_unlock();
}
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
return size;
}
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
#define RTNL_STATS_OFFLOAD_XSTATS_VALID ((1 << __IFLA_OFFLOAD_XSTATS_MAX) - 1)
static const struct nla_policy
rtnl_stats_get_policy_filters[IFLA_STATS_MAX + 1] = {
[IFLA_STATS_LINK_OFFLOAD_XSTATS] =
NLA_POLICY_MASK(NLA_U32, RTNL_STATS_OFFLOAD_XSTATS_VALID),
};
static const struct nla_policy
rtnl_stats_get_policy[IFLA_STATS_GETSET_MAX + 1] = {
[IFLA_STATS_GET_FILTERS] =
NLA_POLICY_NESTED(rtnl_stats_get_policy_filters),
};
static const struct nla_policy
ifla_stats_set_policy[IFLA_STATS_GETSET_MAX + 1] = {
[IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS] = NLA_POLICY_MAX(NLA_U8, 1),
};
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
static int rtnl_stats_get_parse_filters(struct nlattr *ifla_filters,
struct rtnl_stats_dump_filters *filters,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[IFLA_STATS_MAX + 1];
int err;
int at;
err = nla_parse_nested(tb, IFLA_STATS_MAX, ifla_filters,
rtnl_stats_get_policy_filters, extack);
if (err < 0)
return err;
for (at = 1; at <= IFLA_STATS_MAX; at++) {
if (tb[at]) {
if (!(filters->mask[0] & IFLA_STATS_FILTER_BIT(at))) {
NL_SET_ERR_MSG(extack, "Filtered attribute not enabled in filter_mask");
return -EINVAL;
}
filters->mask[at] = nla_get_u32(tb[at]);
}
}
return 0;
}
static int rtnl_stats_get_parse(const struct nlmsghdr *nlh,
u32 filter_mask,
struct rtnl_stats_dump_filters *filters,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[IFLA_STATS_GETSET_MAX + 1];
int err;
int i;
filters->mask[0] = filter_mask;
for (i = 1; i < ARRAY_SIZE(filters->mask); i++)
filters->mask[i] = -1U;
err = nlmsg_parse(nlh, sizeof(struct if_stats_msg), tb,
IFLA_STATS_GETSET_MAX, rtnl_stats_get_policy, extack);
if (err < 0)
return err;
if (tb[IFLA_STATS_GET_FILTERS]) {
err = rtnl_stats_get_parse_filters(tb[IFLA_STATS_GET_FILTERS],
filters, extack);
if (err)
return err;
}
return 0;
}
static int rtnl_valid_stats_req(const struct nlmsghdr *nlh, bool strict_check,
bool is_dump, struct netlink_ext_ack *extack)
{
struct if_stats_msg *ifsm;
rtnetlink: fix rtnl_valid_stats_req() nlmsg_len check Jakub forgot to either use nlmsg_len() or nlmsg_msg_size(), allowing KMSAN to detect a possible uninit-value in rtnl_stats_get BUG: KMSAN: uninit-value in rtnl_stats_get+0x6d9/0x11d0 net/core/rtnetlink.c:4997 CPU: 0 PID: 10428 Comm: syz-executor034 Not tainted 5.1.0-rc2+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x131/0x2a0 mm/kmsan/kmsan.c:619 __msan_warning+0x7a/0xf0 mm/kmsan/kmsan_instr.c:310 rtnl_stats_get+0x6d9/0x11d0 net/core/rtnetlink.c:4997 rtnetlink_rcv_msg+0x115b/0x1550 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg net/socket.c:632 [inline] ___sys_sendmsg+0xdb3/0x1220 net/socket.c:2137 __sys_sendmsg net/socket.c:2175 [inline] __do_sys_sendmsg net/socket.c:2184 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2182 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2182 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: 51bc860d4a99 ("rtnetlink: stats: validate attributes in get as well as dumps") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-14 18:02:05 +00:00
if (nlh->nlmsg_len < nlmsg_msg_size(sizeof(*ifsm))) {
NL_SET_ERR_MSG(extack, "Invalid header for stats dump");
return -EINVAL;
}
if (!strict_check)
return 0;
ifsm = nlmsg_data(nlh);
/* only requests using strict checks can pass data to influence
* the dump. The legacy exception is filter_mask.
*/
if (ifsm->pad1 || ifsm->pad2 || (is_dump && ifsm->ifindex)) {
NL_SET_ERR_MSG(extack, "Invalid values in header for stats dump request");
return -EINVAL;
}
if (ifsm->filter_mask >= IFLA_STATS_FILTER_BIT(IFLA_STATS_MAX + 1)) {
NL_SET_ERR_MSG(extack, "Invalid stats requested through filter mask");
return -EINVAL;
}
return 0;
}
static int rtnl_stats_get(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
{
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
struct rtnl_stats_dump_filters filters;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
struct net *net = sock_net(skb->sk);
struct net_device *dev = NULL;
int idxattr = 0, prividx = 0;
struct if_stats_msg *ifsm;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
struct sk_buff *nskb;
int err;
err = rtnl_valid_stats_req(nlh, netlink_strict_get_check(skb),
false, extack);
if (err)
return err;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
ifsm = nlmsg_data(nlh);
if (ifsm->ifindex > 0)
dev = __dev_get_by_index(net, ifsm->ifindex);
else
return -EINVAL;
if (!dev)
return -ENODEV;
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
if (!ifsm->filter_mask) {
NL_SET_ERR_MSG(extack, "Filter mask must be set for stats get");
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
return -EINVAL;
}
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
err = rtnl_stats_get_parse(nlh, ifsm->filter_mask, &filters, extack);
if (err)
return err;
nskb = nlmsg_new(if_nlmsg_stats_size(dev, &filters), GFP_KERNEL);
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
if (!nskb)
return -ENOBUFS;
err = rtnl_fill_statsinfo(nskb, dev, RTM_NEWSTATS,
NETLINK_CB(skb).portid, nlh->nlmsg_seq, 0,
0, &filters, &idxattr, &prividx, extack);
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
if (err < 0) {
/* -EMSGSIZE implies BUG in if_nlmsg_stats_size */
WARN_ON(err == -EMSGSIZE);
kfree_skb(nskb);
} else {
err = rtnl_unicast(nskb, net, NETLINK_CB(skb).portid);
}
return err;
}
static int rtnl_stats_dump(struct sk_buff *skb, struct netlink_callback *cb)
{
struct netlink_ext_ack *extack = cb->extack;
int h, s_h, err, s_idx, s_idxattr, s_prividx;
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
struct rtnl_stats_dump_filters filters;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
struct net *net = sock_net(skb->sk);
unsigned int flags = NLM_F_MULTI;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
struct if_stats_msg *ifsm;
struct hlist_head *head;
struct net_device *dev;
int idx = 0;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
s_h = cb->args[0];
s_idx = cb->args[1];
s_idxattr = cb->args[2];
s_prividx = cb->args[3];
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
cb->seq = net->dev_base_seq;
err = rtnl_valid_stats_req(cb->nlh, cb->strict_check, true, extack);
if (err)
return err;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
ifsm = nlmsg_data(cb->nlh);
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
if (!ifsm->filter_mask) {
NL_SET_ERR_MSG(extack, "Filter mask must be set for stats dump");
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
return -EINVAL;
}
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
err = rtnl_stats_get_parse(cb->nlh, ifsm->filter_mask, &filters,
extack);
if (err)
return err;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
idx = 0;
head = &net->dev_index_head[h];
hlist_for_each_entry(dev, head, index_hlist) {
if (idx < s_idx)
goto cont;
err = rtnl_fill_statsinfo(skb, dev, RTM_NEWSTATS,
NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, 0,
net: rtnetlink: RTM_GETSTATS: Allow filtering inside nests The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. So far there was only one HW-backed stat suite per attribute. However, IFLA_STATS_LINK_OFFLOAD_XSTATS is a nest, and will gain a new stat suite in the following patches. It would therefore be advantageous to be able to filter within that nest, and select just one or the other HW-backed statistics suite. Extend rtnetlink so that RTM_GETSTATS permits attributes in the payload. The scheme is as follows: - RTM_GETSTATS - struct if_stats_msg - attr nest IFLA_STATS_GET_FILTERS - attr IFLA_STATS_LINK_OFFLOAD_XSTATS - u32 filter_mask This scheme reuses the existing enumerators by nesting them in a dedicated context attribute. This is covered by policies as usual, therefore a gradual opt-in is possible. Currently only IFLA_STATS_LINK_OFFLOAD_XSTATS nest has filtering enabled, because for the SW counters the issue does not seem to be that important. rtnl_offload_xstats_get_size() and _fill() are extended to observe the requested filters. Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-02 16:31:17 +00:00
flags, &filters,
&s_idxattr, &s_prividx,
extack);
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
/* If we ran out of room on the first message,
* we're in trouble
*/
WARN_ON((err == -EMSGSIZE) && (skb->len == 0));
if (err < 0)
goto out;
s_prividx = 0;
s_idxattr = 0;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
nl_dump_check_consistent(cb, nlmsg_hdr(skb));
cont:
idx++;
}
}
out:
cb->args[3] = s_prividx;
cb->args[2] = s_idxattr;
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
cb->args[1] = idx;
cb->args[0] = h;
return skb->len;
}
void rtnl_offload_xstats_notify(struct net_device *dev)
{
struct rtnl_stats_dump_filters response_filters = {};
struct net *net = dev_net(dev);
int idxattr = 0, prividx = 0;
struct sk_buff *skb;
int err = -ENOBUFS;
ASSERT_RTNL();
response_filters.mask[0] |=
IFLA_STATS_FILTER_BIT(IFLA_STATS_LINK_OFFLOAD_XSTATS);
response_filters.mask[IFLA_STATS_LINK_OFFLOAD_XSTATS] |=
IFLA_STATS_FILTER_BIT(IFLA_OFFLOAD_XSTATS_HW_S_INFO);
skb = nlmsg_new(if_nlmsg_stats_size(dev, &response_filters),
GFP_KERNEL);
if (!skb)
goto errout;
err = rtnl_fill_statsinfo(skb, dev, RTM_NEWSTATS, 0, 0, 0, 0,
&response_filters, &idxattr, &prividx, NULL);
if (err < 0) {
kfree_skb(skb);
goto errout;
}
rtnl_notify(skb, net, 0, RTNLGRP_STATS, NULL, GFP_KERNEL);
return;
errout:
rtnl_set_sk_err(net, RTNLGRP_STATS, err);
}
EXPORT_SYMBOL(rtnl_offload_xstats_notify);
static int rtnl_stats_set(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
enum netdev_offload_xstats_type t_l3 = NETDEV_OFFLOAD_XSTATS_TYPE_L3;
struct rtnl_stats_dump_filters response_filters = {};
struct nlattr *tb[IFLA_STATS_GETSET_MAX + 1];
struct net *net = sock_net(skb->sk);
struct net_device *dev = NULL;
struct if_stats_msg *ifsm;
bool notify = false;
int err;
err = rtnl_valid_stats_req(nlh, netlink_strict_get_check(skb),
false, extack);
if (err)
return err;
ifsm = nlmsg_data(nlh);
if (ifsm->family != AF_UNSPEC) {
NL_SET_ERR_MSG(extack, "Address family should be AF_UNSPEC");
return -EINVAL;
}
if (ifsm->ifindex > 0)
dev = __dev_get_by_index(net, ifsm->ifindex);
else
return -EINVAL;
if (!dev)
return -ENODEV;
if (ifsm->filter_mask) {
NL_SET_ERR_MSG(extack, "Filter mask must be 0 for stats set");
return -EINVAL;
}
err = nlmsg_parse(nlh, sizeof(*ifsm), tb, IFLA_STATS_GETSET_MAX,
ifla_stats_set_policy, extack);
if (err < 0)
return err;
if (tb[IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS]) {
u8 req = nla_get_u8(tb[IFLA_STATS_SET_OFFLOAD_XSTATS_L3_STATS]);
if (req)
err = netdev_offload_xstats_enable(dev, t_l3, extack);
else
err = netdev_offload_xstats_disable(dev, t_l3);
if (!err)
notify = true;
else if (err != -EALREADY)
return err;
response_filters.mask[0] |=
IFLA_STATS_FILTER_BIT(IFLA_STATS_LINK_OFFLOAD_XSTATS);
response_filters.mask[IFLA_STATS_LINK_OFFLOAD_XSTATS] |=
IFLA_STATS_FILTER_BIT(IFLA_OFFLOAD_XSTATS_HW_S_INFO);
}
if (notify)
rtnl_offload_xstats_notify(dev);
return 0;
}
static int rtnl_mdb_valid_dump_req(const struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct br_port_msg *bpm;
if (nlh->nlmsg_len < nlmsg_msg_size(sizeof(*bpm))) {
NL_SET_ERR_MSG(extack, "Invalid header for mdb dump request");
return -EINVAL;
}
bpm = nlmsg_data(nlh);
if (bpm->ifindex) {
NL_SET_ERR_MSG(extack, "Filtering by device index is not supported for mdb dump request");
return -EINVAL;
}
if (nlmsg_attrlen(nlh, sizeof(*bpm))) {
NL_SET_ERR_MSG(extack, "Invalid data after header in mdb dump request");
return -EINVAL;
}
return 0;
}
struct rtnl_mdb_dump_ctx {
long idx;
};
static int rtnl_mdb_dump(struct sk_buff *skb, struct netlink_callback *cb)
{
struct rtnl_mdb_dump_ctx *ctx = (void *)cb->ctx;
struct net *net = sock_net(skb->sk);
struct net_device *dev;
int idx, s_idx;
int err;
NL_ASSERT_DUMP_CTX_FITS(struct rtnl_mdb_dump_ctx);
if (cb->strict_check) {
err = rtnl_mdb_valid_dump_req(cb->nlh, cb->extack);
if (err)
return err;
}
s_idx = ctx->idx;
idx = 0;
for_each_netdev(net, dev) {
if (idx < s_idx)
goto skip;
if (!dev->netdev_ops->ndo_mdb_dump)
goto skip;
err = dev->netdev_ops->ndo_mdb_dump(dev, skb, cb);
if (err == -EMSGSIZE)
goto out;
/* Moving on to next device, reset markers and sequence
* counters since they are all maintained per-device.
*/
memset(cb->ctx, 0, sizeof(cb->ctx));
cb->prev_seq = 0;
cb->seq = 0;
skip:
idx++;
}
out:
ctx->idx = idx;
return skb->len;
}
static int rtnl_validate_mdb_entry(const struct nlattr *attr,
struct netlink_ext_ack *extack)
{
struct br_mdb_entry *entry = nla_data(attr);
if (nla_len(attr) != sizeof(struct br_mdb_entry)) {
NL_SET_ERR_MSG_ATTR(extack, attr, "Invalid attribute length");
return -EINVAL;
}
if (entry->ifindex == 0) {
NL_SET_ERR_MSG(extack, "Zero entry ifindex is not allowed");
return -EINVAL;
}
if (entry->addr.proto == htons(ETH_P_IP)) {
if (!ipv4_is_multicast(entry->addr.u.ip4) &&
!ipv4_is_zeronet(entry->addr.u.ip4)) {
NL_SET_ERR_MSG(extack, "IPv4 entry group address is not multicast or 0.0.0.0");
return -EINVAL;
}
if (ipv4_is_local_multicast(entry->addr.u.ip4)) {
NL_SET_ERR_MSG(extack, "IPv4 entry group address is local multicast");
return -EINVAL;
}
#if IS_ENABLED(CONFIG_IPV6)
} else if (entry->addr.proto == htons(ETH_P_IPV6)) {
if (ipv6_addr_is_ll_all_nodes(&entry->addr.u.ip6)) {
NL_SET_ERR_MSG(extack, "IPv6 entry group address is link-local all nodes");
return -EINVAL;
}
#endif
} else if (entry->addr.proto == 0) {
/* L2 mdb */
if (!is_multicast_ether_addr(entry->addr.u.mac_addr)) {
NL_SET_ERR_MSG(extack, "L2 entry group is not multicast");
return -EINVAL;
}
} else {
NL_SET_ERR_MSG(extack, "Unknown entry protocol");
return -EINVAL;
}
if (entry->state != MDB_PERMANENT && entry->state != MDB_TEMPORARY) {
NL_SET_ERR_MSG(extack, "Unknown entry state");
return -EINVAL;
}
if (entry->vid >= VLAN_VID_MASK) {
NL_SET_ERR_MSG(extack, "Invalid entry VLAN id");
return -EINVAL;
}
return 0;
}
static const struct nla_policy mdba_policy[MDBA_SET_ENTRY_MAX + 1] = {
[MDBA_SET_ENTRY_UNSPEC] = { .strict_start_type = MDBA_SET_ENTRY_ATTRS + 1 },
[MDBA_SET_ENTRY] = NLA_POLICY_VALIDATE_FN(NLA_BINARY,
rtnl_validate_mdb_entry,
sizeof(struct br_mdb_entry)),
[MDBA_SET_ENTRY_ATTRS] = { .type = NLA_NESTED },
};
static int rtnl_mdb_add(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[MDBA_SET_ENTRY_MAX + 1];
struct net *net = sock_net(skb->sk);
struct br_port_msg *bpm;
struct net_device *dev;
int err;
err = nlmsg_parse_deprecated(nlh, sizeof(*bpm), tb,
MDBA_SET_ENTRY_MAX, mdba_policy, extack);
if (err)
return err;
bpm = nlmsg_data(nlh);
if (!bpm->ifindex) {
NL_SET_ERR_MSG(extack, "Invalid ifindex");
return -EINVAL;
}
dev = __dev_get_by_index(net, bpm->ifindex);
if (!dev) {
NL_SET_ERR_MSG(extack, "Device doesn't exist");
return -ENODEV;
}
if (NL_REQ_ATTR_CHECK(extack, NULL, tb, MDBA_SET_ENTRY)) {
NL_SET_ERR_MSG(extack, "Missing MDBA_SET_ENTRY attribute");
return -EINVAL;
}
if (!dev->netdev_ops->ndo_mdb_add) {
NL_SET_ERR_MSG(extack, "Device does not support MDB operations");
return -EOPNOTSUPP;
}
return dev->netdev_ops->ndo_mdb_add(dev, tb, nlh->nlmsg_flags, extack);
}
static int rtnl_mdb_del(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct nlattr *tb[MDBA_SET_ENTRY_MAX + 1];
struct net *net = sock_net(skb->sk);
struct br_port_msg *bpm;
struct net_device *dev;
int err;
err = nlmsg_parse_deprecated(nlh, sizeof(*bpm), tb,
MDBA_SET_ENTRY_MAX, mdba_policy, extack);
if (err)
return err;
bpm = nlmsg_data(nlh);
if (!bpm->ifindex) {
NL_SET_ERR_MSG(extack, "Invalid ifindex");
return -EINVAL;
}
dev = __dev_get_by_index(net, bpm->ifindex);
if (!dev) {
NL_SET_ERR_MSG(extack, "Device doesn't exist");
return -ENODEV;
}
if (NL_REQ_ATTR_CHECK(extack, NULL, tb, MDBA_SET_ENTRY)) {
NL_SET_ERR_MSG(extack, "Missing MDBA_SET_ENTRY attribute");
return -EINVAL;
}
if (!dev->netdev_ops->ndo_mdb_del) {
NL_SET_ERR_MSG(extack, "Device does not support MDB operations");
return -EOPNOTSUPP;
}
return dev->netdev_ops->ndo_mdb_del(dev, tb, extack);
}
/* Process one rtnetlink message. */
static int rtnetlink_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh,
struct netlink_ext_ack *extack)
{
struct net *net = sock_net(skb->sk);
struct rtnl_link *link;
enum rtnl_kinds kind;
struct module *owner;
int err = -EOPNOTSUPP;
rtnl_doit_func doit;
unsigned int flags;
int family;
int type;
type = nlh->nlmsg_type;
if (type > RTM_MAX)
return -EOPNOTSUPP;
type -= RTM_BASE;
/* All the messages must have at least 1 byte length */
if (nlmsg_len(nlh) < sizeof(struct rtgenmsg))
return 0;
family = ((struct rtgenmsg *)nlmsg_data(nlh))->rtgen_family;
kind = rtnl_msgtype_kind(type);
if (kind != RTNL_KIND_GET && !netlink_net_capable(skb, CAP_NET_ADMIN))
return -EPERM;
rcu_read_lock();
if (kind == RTNL_KIND_GET && (nlh->nlmsg_flags & NLM_F_DUMP)) {
struct sock *rtnl;
rtnl_dumpit_func dumpit;
u32 min_dump_alloc = 0;
link = rtnl_get_link(family, type);
if (!link || !link->dumpit) {
family = PF_UNSPEC;
link = rtnl_get_link(family, type);
if (!link || !link->dumpit)
goto err_unlock;
}
owner = link->owner;
dumpit = link->dumpit;
if (type == RTM_GETLINK - RTM_BASE)
min_dump_alloc = rtnl_calcit(skb, nlh);
err = 0;
/* need to do this before rcu_read_unlock() */
if (!try_module_get(owner))
err = -EPROTONOSUPPORT;
rcu_read_unlock();
rtnl = net->rtnl;
if (err == 0) {
struct netlink_dump_control c = {
.dump = dumpit,
.min_dump_alloc = min_dump_alloc,
.module = owner,
};
err = netlink_dump_start(rtnl, skb, nlh, &c);
/* netlink_dump_start() will keep a reference on
* module if dump is still in progress.
*/
module_put(owner);
}
return err;
}
link = rtnl_get_link(family, type);
if (!link || !link->doit) {
family = PF_UNSPEC;
link = rtnl_get_link(PF_UNSPEC, type);
if (!link || !link->doit)
goto out_unlock;
}
owner = link->owner;
if (!try_module_get(owner)) {
err = -EPROTONOSUPPORT;
goto out_unlock;
}
flags = link->flags;
if (kind == RTNL_KIND_DEL && (nlh->nlmsg_flags & NLM_F_BULK) &&
!(flags & RTNL_FLAG_BULK_DEL_SUPPORTED)) {
NL_SET_ERR_MSG(extack, "Bulk delete is not supported");
module_put(owner);
goto err_unlock;
}
if (flags & RTNL_FLAG_DOIT_UNLOCKED) {
doit = link->doit;
rcu_read_unlock();
if (doit)
err = doit(skb, nlh, extack);
module_put(owner);
return err;
}
rcu_read_unlock();
rtnl_lock();
link = rtnl_get_link(family, type);
if (link && link->doit)
err = link->doit(skb, nlh, extack);
rtnl_unlock();
module_put(owner);
return err;
out_unlock:
rcu_read_unlock();
return err;
err_unlock:
rcu_read_unlock();
return -EOPNOTSUPP;
}
static void rtnetlink_rcv(struct sk_buff *skb)
{
netlink_rcv_skb(skb, &rtnetlink_rcv_msg);
}
static int rtnetlink_bind(struct net *net, int group)
{
switch (group) {
case RTNLGRP_IPV4_MROUTE_R:
case RTNLGRP_IPV6_MROUTE_R:
if (!ns_capable(net->user_ns, CAP_NET_ADMIN))
return -EPERM;
break;
}
return 0;
}
static int rtnetlink_event(struct notifier_block *this, unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
switch (event) {
case NETDEV_REBOOT:
case NETDEV_CHANGEMTU:
case NETDEV_CHANGEADDR:
case NETDEV_CHANGENAME:
case NETDEV_FEAT_CHANGE:
case NETDEV_BONDING_FAILOVER:
case NETDEV_POST_TYPE_CHANGE:
case NETDEV_NOTIFY_PEERS:
case NETDEV_CHANGEUPPER:
case NETDEV_RESEND_IGMP:
case NETDEV_CHANGEINFODATA:
case NETDEV_CHANGELOWERSTATE:
case NETDEV_CHANGE_TX_QUEUE_LEN:
rtmsg_ifinfo_event(RTM_NEWLINK, dev, 0, rtnl_get_event(event),
GFP_KERNEL, NULL, 0, 0, NULL);
break;
default:
break;
}
return NOTIFY_DONE;
}
static struct notifier_block rtnetlink_dev_notifier = {
.notifier_call = rtnetlink_event,
};
static int __net_init rtnetlink_net_init(struct net *net)
{
struct sock *sk;
struct netlink_kernel_cfg cfg = {
.groups = RTNLGRP_MAX,
.input = rtnetlink_rcv,
.cb_mutex = &rtnl_mutex,
.flags = NL_CFG_F_NONROOT_RECV,
.bind = rtnetlink_bind,
};
sk = netlink_kernel_create(net, NETLINK_ROUTE, &cfg);
if (!sk)
return -ENOMEM;
net->rtnl = sk;
return 0;
}
static void __net_exit rtnetlink_net_exit(struct net *net)
{
netlink_kernel_release(net->rtnl);
net->rtnl = NULL;
}
static struct pernet_operations rtnetlink_net_ops = {
.init = rtnetlink_net_init,
.exit = rtnetlink_net_exit,
};
void __init rtnetlink_init(void)
{
if (register_pernet_subsys(&rtnetlink_net_ops))
panic("rtnetlink_init: cannot initialize rtnetlink\n");
register_netdevice_notifier(&rtnetlink_dev_notifier);
rtnl_register(PF_UNSPEC, RTM_GETLINK, rtnl_getlink,
rtnl_dump_ifinfo, 0);
rtnl_register(PF_UNSPEC, RTM_SETLINK, rtnl_setlink, NULL, 0);
rtnl_register(PF_UNSPEC, RTM_NEWLINK, rtnl_newlink, NULL, 0);
rtnl_register(PF_UNSPEC, RTM_DELLINK, rtnl_dellink, NULL, 0);
rtnl_register(PF_UNSPEC, RTM_GETADDR, NULL, rtnl_dump_all, 0);
rtnl_register(PF_UNSPEC, RTM_GETROUTE, NULL, rtnl_dump_all, 0);
rtnl_register(PF_UNSPEC, RTM_GETNETCONF, NULL, rtnl_dump_all, 0);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 06:43:56 +00:00
rtnl_register(PF_UNSPEC, RTM_NEWLINKPROP, rtnl_newlinkprop, NULL, 0);
rtnl_register(PF_UNSPEC, RTM_DELLINKPROP, rtnl_dellinkprop, NULL, 0);
rtnl_register(PF_BRIDGE, RTM_NEWNEIGH, rtnl_fdb_add, NULL, 0);
rtnl_register(PF_BRIDGE, RTM_DELNEIGH, rtnl_fdb_del, NULL,
RTNL_FLAG_BULK_DEL_SUPPORTED);
rtnl_register(PF_BRIDGE, RTM_GETNEIGH, rtnl_fdb_get, rtnl_fdb_dump, 0);
rtnl_register(PF_BRIDGE, RTM_GETLINK, NULL, rtnl_bridge_getlink, 0);
rtnl_register(PF_BRIDGE, RTM_DELLINK, rtnl_bridge_dellink, NULL, 0);
rtnl_register(PF_BRIDGE, RTM_SETLINK, rtnl_bridge_setlink, NULL, 0);
rtnetlink: add new RTM_GETSTATS message to dump link stats This patch adds a new RTM_GETSTATS message to query link stats via netlink from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK returns a lot more than just stats and is expensive in some cases when frequent polling for stats from userspace is a common operation. RTM_GETSTATS is an attempt to provide a light weight netlink message to explicity query only link stats from the kernel on an interface. The idea is to also keep it extensible so that new kinds of stats can be added to it in the future. This patch adds the following attribute for NETDEV stats: struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = { [IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) }, }; Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of a single interface or all interfaces with NLM_F_DUMP. Future possible new types of stat attributes: link af stats: - IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats) - IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats) extended stats: - IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge, vlan, vxlan etc) - IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are available via ethtool today) This patch also declares a filter mask for all stat attributes. User has to provide a mask of stats attributes to query. filter mask can be specified in the new hdr 'struct if_stats_msg' for stats messages. Other important field in the header is the ifindex. This api can also include attributes for global stats (eg tcp) in the future. When global stats are included in a stats msg, the ifindex in the header must be zero. A single stats message cannot contain both global and netdev specific stats. To easily distinguish them, netdev specific stat attributes name are prefixed with IFLA_STATS_LINK_ Without any attributes in the filter_mask, no stats will be returned. This patch has been tested with mofified iproute2 ifstat. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20 15:43:43 +00:00
rtnl_register(PF_UNSPEC, RTM_GETSTATS, rtnl_stats_get, rtnl_stats_dump,
0);
rtnl_register(PF_UNSPEC, RTM_SETSTATS, rtnl_stats_set, NULL, 0);
rtnl_register(PF_BRIDGE, RTM_GETMDB, NULL, rtnl_mdb_dump, 0);
rtnl_register(PF_BRIDGE, RTM_NEWMDB, rtnl_mdb_add, NULL, 0);
rtnl_register(PF_BRIDGE, RTM_DELMDB, rtnl_mdb_del, NULL, 0);
}