linux/drivers/net/wireless/iwlwifi/iwl-agn.c

3530 lines
96 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
*
* Portions of this file are derived from the ipw3945 project, as well
* as portions of the ieee80211 subsystem header files.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <net/mac80211.h>
#include <asm/div64.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-helpers.h"
#include "iwl-sta.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
#include "iwl-shared.h"
#include "iwl-bus.h"
#include "iwl-trans.h"
/******************************************************************************
*
* module boiler plate
*
******************************************************************************/
/*
* module name, copyright, version, etc.
*/
#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux"
#ifdef CONFIG_IWLWIFI_DEBUG
#define VD "d"
#else
#define VD
#endif
#define DRV_VERSION IWLWIFI_VERSION VD
MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
void iwl_update_chain_flags(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
for_each_context(priv, ctx) {
iwlagn_set_rxon_chain(priv, ctx);
if (ctx->active.rx_chain != ctx->staging.rx_chain)
iwlagn_commit_rxon(priv, ctx);
}
}
/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
static void iwl_set_beacon_tim(struct iwl_priv *priv,
struct iwl_tx_beacon_cmd *tx_beacon_cmd,
u8 *beacon, u32 frame_size)
{
u16 tim_idx;
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
/*
* The index is relative to frame start but we start looking at the
* variable-length part of the beacon.
*/
tim_idx = mgmt->u.beacon.variable - beacon;
/* Parse variable-length elements of beacon to find WLAN_EID_TIM */
while ((tim_idx < (frame_size - 2)) &&
(beacon[tim_idx] != WLAN_EID_TIM))
tim_idx += beacon[tim_idx+1] + 2;
/* If TIM field was found, set variables */
if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
tx_beacon_cmd->tim_size = beacon[tim_idx+1];
} else
IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
}
int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
{
struct iwl_tx_beacon_cmd *tx_beacon_cmd;
struct iwl_host_cmd cmd = {
.id = REPLY_TX_BEACON,
.flags = CMD_SYNC,
};
struct ieee80211_tx_info *info;
u32 frame_size;
u32 rate_flags;
u32 rate;
/*
* We have to set up the TX command, the TX Beacon command, and the
* beacon contents.
*/
lockdep_assert_held(&priv->shrd->mutex);
if (!priv->beacon_ctx) {
IWL_ERR(priv, "trying to build beacon w/o beacon context!\n");
return 0;
}
if (WARN_ON(!priv->beacon_skb))
return -EINVAL;
/* Allocate beacon command */
if (!priv->beacon_cmd)
priv->beacon_cmd = kzalloc(sizeof(*tx_beacon_cmd), GFP_KERNEL);
tx_beacon_cmd = priv->beacon_cmd;
if (!tx_beacon_cmd)
return -ENOMEM;
frame_size = priv->beacon_skb->len;
/* Set up TX command fields */
tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
tx_beacon_cmd->tx.sta_id = priv->beacon_ctx->bcast_sta_id;
tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
/* Set up TX beacon command fields */
iwl_set_beacon_tim(priv, tx_beacon_cmd, priv->beacon_skb->data,
frame_size);
/* Set up packet rate and flags */
info = IEEE80211_SKB_CB(priv->beacon_skb);
/*
* Let's set up the rate at least somewhat correctly;
* it will currently not actually be used by the uCode,
* it uses the broadcast station's rate instead.
*/
if (info->control.rates[0].idx < 0 ||
info->control.rates[0].flags & IEEE80211_TX_RC_MCS)
rate = 0;
else
rate = info->control.rates[0].idx;
priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant,
hw_params(priv).valid_tx_ant);
rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
/* In mac80211, rates for 5 GHz start at 0 */
if (info->band == IEEE80211_BAND_5GHZ)
rate += IWL_FIRST_OFDM_RATE;
else if (rate >= IWL_FIRST_CCK_RATE && rate <= IWL_LAST_CCK_RATE)
rate_flags |= RATE_MCS_CCK_MSK;
tx_beacon_cmd->tx.rate_n_flags =
iwl_hw_set_rate_n_flags(rate, rate_flags);
/* Submit command */
cmd.len[0] = sizeof(*tx_beacon_cmd);
cmd.data[0] = tx_beacon_cmd;
cmd.dataflags[0] = IWL_HCMD_DFL_NOCOPY;
cmd.len[1] = frame_size;
cmd.data[1] = priv->beacon_skb->data;
cmd.dataflags[1] = IWL_HCMD_DFL_NOCOPY;
return iwl_trans_send_cmd(trans(priv), &cmd);
}
static void iwl_bg_beacon_update(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, beacon_update);
struct sk_buff *beacon;
mutex_lock(&priv->shrd->mutex);
if (!priv->beacon_ctx) {
IWL_ERR(priv, "updating beacon w/o beacon context!\n");
goto out;
}
if (priv->beacon_ctx->vif->type != NL80211_IFTYPE_AP) {
/*
* The ucode will send beacon notifications even in
* IBSS mode, but we don't want to process them. But
* we need to defer the type check to here due to
* requiring locking around the beacon_ctx access.
*/
goto out;
}
/* Pull updated AP beacon from mac80211. will fail if not in AP mode */
beacon = ieee80211_beacon_get(priv->hw, priv->beacon_ctx->vif);
if (!beacon) {
IWL_ERR(priv, "update beacon failed -- keeping old\n");
goto out;
}
/* new beacon skb is allocated every time; dispose previous.*/
dev_kfree_skb(priv->beacon_skb);
priv->beacon_skb = beacon;
iwlagn_send_beacon_cmd(priv);
out:
mutex_unlock(&priv->shrd->mutex);
}
static void iwl_bg_bt_runtime_config(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, bt_runtime_config);
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv->shrd))
return;
iwlagn_send_advance_bt_config(priv);
}
static void iwl_bg_bt_full_concurrency(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, bt_full_concurrency);
struct iwl_rxon_context *ctx;
mutex_lock(&priv->shrd->mutex);
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
goto out;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv->shrd))
goto out;
IWL_DEBUG_INFO(priv, "BT coex in %s mode\n",
priv->bt_full_concurrent ?
"full concurrency" : "3-wire");
/*
* LQ & RXON updated cmds must be sent before BT Config cmd
* to avoid 3-wire collisions
*/
for_each_context(priv, ctx) {
iwlagn_set_rxon_chain(priv, ctx);
iwlagn_commit_rxon(priv, ctx);
}
iwlagn_send_advance_bt_config(priv);
out:
mutex_unlock(&priv->shrd->mutex);
}
/**
* iwl_bg_statistics_periodic - Timer callback to queue statistics
*
* This callback is provided in order to send a statistics request.
*
* This timer function is continually reset to execute within
* REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
* was received. We need to ensure we receive the statistics in order
* to update the temperature used for calibrating the TXPOWER.
*/
static void iwl_bg_statistics_periodic(unsigned long data)
{
struct iwl_priv *priv = (struct iwl_priv *)data;
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
/* dont send host command if rf-kill is on */
if (!iwl_is_ready_rf(priv->shrd))
return;
iwl_send_statistics_request(priv, CMD_ASYNC, false);
}
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base,
u32 start_idx, u32 num_events,
u32 mode)
{
u32 i;
u32 ptr; /* SRAM byte address of log data */
u32 ev, time, data; /* event log data */
unsigned long reg_flags;
if (mode == 0)
ptr = base + (4 * sizeof(u32)) + (start_idx * 2 * sizeof(u32));
else
ptr = base + (4 * sizeof(u32)) + (start_idx * 3 * sizeof(u32));
/* Make sure device is powered up for SRAM reads */
spin_lock_irqsave(&bus(priv)->reg_lock, reg_flags);
if (iwl_grab_nic_access(bus(priv))) {
spin_unlock_irqrestore(&bus(priv)->reg_lock, reg_flags);
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
return;
}
/* Set starting address; reads will auto-increment */
iwl_write32(bus(priv), HBUS_TARG_MEM_RADDR, ptr);
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
rmb();
/*
* "time" is actually "data" for mode 0 (no timestamp).
* place event id # at far right for easier visual parsing.
*/
for (i = 0; i < num_events; i++) {
ev = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT);
time = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT);
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
if (mode == 0) {
trace_iwlwifi_dev_ucode_cont_event(priv,
0, time, ev);
} else {
data = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT);
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
trace_iwlwifi_dev_ucode_cont_event(priv,
time, data, ev);
}
}
/* Allow device to power down */
iwl_release_nic_access(bus(priv));
spin_unlock_irqrestore(&bus(priv)->reg_lock, reg_flags);
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
}
static void iwl_continuous_event_trace(struct iwl_priv *priv)
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
{
u32 capacity; /* event log capacity in # entries */
u32 base; /* SRAM byte address of event log header */
u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
u32 num_wraps; /* # times uCode wrapped to top of log */
u32 next_entry; /* index of next entry to be written by uCode */
base = priv->device_pointers.error_event_table;
if (iwlagn_hw_valid_rtc_data_addr(base)) {
capacity = iwl_read_targ_mem(bus(priv), base);
num_wraps = iwl_read_targ_mem(bus(priv),
base + (2 * sizeof(u32)));
mode = iwl_read_targ_mem(bus(priv), base + (1 * sizeof(u32)));
next_entry = iwl_read_targ_mem(bus(priv),
base + (3 * sizeof(u32)));
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
} else
return;
if (num_wraps == priv->event_log.num_wraps) {
iwl_print_cont_event_trace(priv,
base, priv->event_log.next_entry,
next_entry - priv->event_log.next_entry,
mode);
priv->event_log.non_wraps_count++;
} else {
if ((num_wraps - priv->event_log.num_wraps) > 1)
priv->event_log.wraps_more_count++;
else
priv->event_log.wraps_once_count++;
trace_iwlwifi_dev_ucode_wrap_event(priv,
num_wraps - priv->event_log.num_wraps,
next_entry, priv->event_log.next_entry);
if (next_entry < priv->event_log.next_entry) {
iwl_print_cont_event_trace(priv, base,
priv->event_log.next_entry,
capacity - priv->event_log.next_entry,
mode);
iwl_print_cont_event_trace(priv, base, 0,
next_entry, mode);
} else {
iwl_print_cont_event_trace(priv, base,
next_entry, capacity - next_entry,
mode);
iwl_print_cont_event_trace(priv, base, 0,
next_entry, mode);
}
}
priv->event_log.num_wraps = num_wraps;
priv->event_log.next_entry = next_entry;
}
/**
* iwl_bg_ucode_trace - Timer callback to log ucode event
*
* The timer is continually set to execute every
* UCODE_TRACE_PERIOD milliseconds after the last timer expired
* this function is to perform continuous uCode event logging operation
* if enabled
*/
static void iwl_bg_ucode_trace(unsigned long data)
{
struct iwl_priv *priv = (struct iwl_priv *)data;
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
return;
if (priv->event_log.ucode_trace) {
iwl_continuous_event_trace(priv);
/* Reschedule the timer to occur in UCODE_TRACE_PERIOD */
mod_timer(&priv->ucode_trace,
jiffies + msecs_to_jiffies(UCODE_TRACE_PERIOD));
}
}
static void iwl_bg_tx_flush(struct work_struct *work)
{
struct iwl_priv *priv =
container_of(work, struct iwl_priv, tx_flush);
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
/* do nothing if rf-kill is on */
if (!iwl_is_ready_rf(priv->shrd))
return;
IWL_DEBUG_INFO(priv, "device request: flush all tx frames\n");
iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
}
/******************************************************************************
*
* uCode download functions
*
******************************************************************************/
static void iwl_free_fw_desc(struct iwl_priv *priv, struct fw_desc *desc)
{
if (desc->v_addr)
dma_free_coherent(priv->bus->dev, desc->len,
desc->v_addr, desc->p_addr);
desc->v_addr = NULL;
desc->len = 0;
}
static void iwl_free_fw_img(struct iwl_priv *priv, struct fw_img *img)
{
iwl_free_fw_desc(priv, &img->code);
iwl_free_fw_desc(priv, &img->data);
}
static void iwl_dealloc_ucode(struct iwl_priv *priv)
{
iwl_free_fw_img(priv, &priv->ucode_rt);
iwl_free_fw_img(priv, &priv->ucode_init);
iwl_free_fw_img(priv, &priv->ucode_wowlan);
}
static int iwl_alloc_fw_desc(struct iwl_priv *priv, struct fw_desc *desc,
const void *data, size_t len)
{
if (!len) {
desc->v_addr = NULL;
return -EINVAL;
}
desc->v_addr = dma_alloc_coherent(priv->bus->dev, len,
&desc->p_addr, GFP_KERNEL);
if (!desc->v_addr)
return -ENOMEM;
desc->len = len;
memcpy(desc->v_addr, data, len);
return 0;
}
static void iwl_init_context(struct iwl_priv *priv, u32 ucode_flags)
{
int i;
/*
* The default context is always valid,
* the PAN context depends on uCode.
*/
priv->shrd->valid_contexts = BIT(IWL_RXON_CTX_BSS);
if (ucode_flags & IWL_UCODE_TLV_FLAGS_PAN)
priv->shrd->valid_contexts |= BIT(IWL_RXON_CTX_PAN);
for (i = 0; i < NUM_IWL_RXON_CTX; i++)
priv->contexts[i].ctxid = i;
priv->contexts[IWL_RXON_CTX_BSS].always_active = true;
priv->contexts[IWL_RXON_CTX_BSS].is_active = true;
priv->contexts[IWL_RXON_CTX_BSS].rxon_cmd = REPLY_RXON;
priv->contexts[IWL_RXON_CTX_BSS].rxon_timing_cmd = REPLY_RXON_TIMING;
priv->contexts[IWL_RXON_CTX_BSS].rxon_assoc_cmd = REPLY_RXON_ASSOC;
priv->contexts[IWL_RXON_CTX_BSS].qos_cmd = REPLY_QOS_PARAM;
priv->contexts[IWL_RXON_CTX_BSS].ap_sta_id = IWL_AP_ID;
priv->contexts[IWL_RXON_CTX_BSS].wep_key_cmd = REPLY_WEPKEY;
priv->contexts[IWL_RXON_CTX_BSS].exclusive_interface_modes =
BIT(NL80211_IFTYPE_ADHOC);
priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
BIT(NL80211_IFTYPE_STATION);
priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
priv->contexts[IWL_RXON_CTX_PAN].rxon_cmd = REPLY_WIPAN_RXON;
priv->contexts[IWL_RXON_CTX_PAN].rxon_timing_cmd =
REPLY_WIPAN_RXON_TIMING;
priv->contexts[IWL_RXON_CTX_PAN].rxon_assoc_cmd =
REPLY_WIPAN_RXON_ASSOC;
priv->contexts[IWL_RXON_CTX_PAN].qos_cmd = REPLY_WIPAN_QOS_PARAM;
priv->contexts[IWL_RXON_CTX_PAN].ap_sta_id = IWL_AP_ID_PAN;
priv->contexts[IWL_RXON_CTX_PAN].wep_key_cmd = REPLY_WIPAN_WEPKEY;
priv->contexts[IWL_RXON_CTX_PAN].bcast_sta_id = IWLAGN_PAN_BCAST_ID;
priv->contexts[IWL_RXON_CTX_PAN].station_flags = STA_FLG_PAN_STATION;
priv->contexts[IWL_RXON_CTX_PAN].interface_modes =
BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP);
if (ucode_flags & IWL_UCODE_TLV_FLAGS_P2P)
priv->contexts[IWL_RXON_CTX_PAN].interface_modes |=
BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_P2P_GO);
priv->contexts[IWL_RXON_CTX_PAN].ap_devtype = RXON_DEV_TYPE_CP;
priv->contexts[IWL_RXON_CTX_PAN].station_devtype = RXON_DEV_TYPE_2STA;
priv->contexts[IWL_RXON_CTX_PAN].unused_devtype = RXON_DEV_TYPE_P2P;
BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
}
struct iwlagn_ucode_capabilities {
u32 max_probe_length;
u32 standard_phy_calibration_size;
u32 flags;
};
static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context);
static int iwl_mac_setup_register(struct iwl_priv *priv,
struct iwlagn_ucode_capabilities *capa);
#define UCODE_EXPERIMENTAL_INDEX 100
#define UCODE_EXPERIMENTAL_TAG "exp"
static int __must_check iwl_request_firmware(struct iwl_priv *priv, bool first)
{
const char *name_pre = priv->cfg->fw_name_pre;
char tag[8];
if (first) {
#ifdef CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE
priv->fw_index = UCODE_EXPERIMENTAL_INDEX;
strcpy(tag, UCODE_EXPERIMENTAL_TAG);
} else if (priv->fw_index == UCODE_EXPERIMENTAL_INDEX) {
#endif
priv->fw_index = priv->cfg->ucode_api_max;
sprintf(tag, "%d", priv->fw_index);
} else {
priv->fw_index--;
sprintf(tag, "%d", priv->fw_index);
}
if (priv->fw_index < priv->cfg->ucode_api_min) {
IWL_ERR(priv, "no suitable firmware found!\n");
return -ENOENT;
}
sprintf(priv->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
IWL_DEBUG_INFO(priv, "attempting to load firmware %s'%s'\n",
(priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
? "EXPERIMENTAL " : "",
priv->firmware_name);
return request_firmware_nowait(THIS_MODULE, 1, priv->firmware_name,
priv->bus->dev,
GFP_KERNEL, priv, iwl_ucode_callback);
}
struct iwlagn_firmware_pieces {
const void *inst, *data, *init, *init_data, *wowlan_inst, *wowlan_data;
size_t inst_size, data_size, init_size, init_data_size,
wowlan_inst_size, wowlan_data_size;
u32 build;
u32 init_evtlog_ptr, init_evtlog_size, init_errlog_ptr;
u32 inst_evtlog_ptr, inst_evtlog_size, inst_errlog_ptr;
};
static int iwlagn_load_legacy_firmware(struct iwl_priv *priv,
const struct firmware *ucode_raw,
struct iwlagn_firmware_pieces *pieces)
{
struct iwl_ucode_header *ucode = (void *)ucode_raw->data;
u32 api_ver, hdr_size;
const u8 *src;
priv->ucode_ver = le32_to_cpu(ucode->ver);
api_ver = IWL_UCODE_API(priv->ucode_ver);
switch (api_ver) {
default:
hdr_size = 28;
if (ucode_raw->size < hdr_size) {
IWL_ERR(priv, "File size too small!\n");
return -EINVAL;
}
pieces->build = le32_to_cpu(ucode->u.v2.build);
pieces->inst_size = le32_to_cpu(ucode->u.v2.inst_size);
pieces->data_size = le32_to_cpu(ucode->u.v2.data_size);
pieces->init_size = le32_to_cpu(ucode->u.v2.init_size);
pieces->init_data_size = le32_to_cpu(ucode->u.v2.init_data_size);
src = ucode->u.v2.data;
break;
case 0:
case 1:
case 2:
hdr_size = 24;
if (ucode_raw->size < hdr_size) {
IWL_ERR(priv, "File size too small!\n");
return -EINVAL;
}
pieces->build = 0;
pieces->inst_size = le32_to_cpu(ucode->u.v1.inst_size);
pieces->data_size = le32_to_cpu(ucode->u.v1.data_size);
pieces->init_size = le32_to_cpu(ucode->u.v1.init_size);
pieces->init_data_size = le32_to_cpu(ucode->u.v1.init_data_size);
src = ucode->u.v1.data;
break;
}
/* Verify size of file vs. image size info in file's header */
if (ucode_raw->size != hdr_size + pieces->inst_size +
pieces->data_size + pieces->init_size +
pieces->init_data_size) {
IWL_ERR(priv,
"uCode file size %d does not match expected size\n",
(int)ucode_raw->size);
return -EINVAL;
}
pieces->inst = src;
src += pieces->inst_size;
pieces->data = src;
src += pieces->data_size;
pieces->init = src;
src += pieces->init_size;
pieces->init_data = src;
src += pieces->init_data_size;
return 0;
}
static int iwlagn_load_firmware(struct iwl_priv *priv,
const struct firmware *ucode_raw,
struct iwlagn_firmware_pieces *pieces,
struct iwlagn_ucode_capabilities *capa)
{
struct iwl_tlv_ucode_header *ucode = (void *)ucode_raw->data;
struct iwl_ucode_tlv *tlv;
size_t len = ucode_raw->size;
const u8 *data;
int wanted_alternative = iwlagn_mod_params.wanted_ucode_alternative;
int tmp;
u64 alternatives;
u32 tlv_len;
enum iwl_ucode_tlv_type tlv_type;
const u8 *tlv_data;
if (len < sizeof(*ucode)) {
IWL_ERR(priv, "uCode has invalid length: %zd\n", len);
return -EINVAL;
}
if (ucode->magic != cpu_to_le32(IWL_TLV_UCODE_MAGIC)) {
IWL_ERR(priv, "invalid uCode magic: 0X%x\n",
le32_to_cpu(ucode->magic));
return -EINVAL;
}
/*
* Check which alternatives are present, and "downgrade"
* when the chosen alternative is not present, warning
* the user when that happens. Some files may not have
* any alternatives, so don't warn in that case.
*/
alternatives = le64_to_cpu(ucode->alternatives);
tmp = wanted_alternative;
if (wanted_alternative > 63)
wanted_alternative = 63;
while (wanted_alternative && !(alternatives & BIT(wanted_alternative)))
wanted_alternative--;
if (wanted_alternative && wanted_alternative != tmp)
IWL_WARN(priv,
"uCode alternative %d not available, choosing %d\n",
tmp, wanted_alternative);
priv->ucode_ver = le32_to_cpu(ucode->ver);
pieces->build = le32_to_cpu(ucode->build);
data = ucode->data;
len -= sizeof(*ucode);
while (len >= sizeof(*tlv)) {
u16 tlv_alt;
len -= sizeof(*tlv);
tlv = (void *)data;
tlv_len = le32_to_cpu(tlv->length);
tlv_type = le16_to_cpu(tlv->type);
tlv_alt = le16_to_cpu(tlv->alternative);
tlv_data = tlv->data;
if (len < tlv_len) {
IWL_ERR(priv, "invalid TLV len: %zd/%u\n",
len, tlv_len);
return -EINVAL;
}
len -= ALIGN(tlv_len, 4);
data += sizeof(*tlv) + ALIGN(tlv_len, 4);
/*
* Alternative 0 is always valid.
*
* Skip alternative TLVs that are not selected.
*/
if (tlv_alt != 0 && tlv_alt != wanted_alternative)
continue;
switch (tlv_type) {
case IWL_UCODE_TLV_INST:
pieces->inst = tlv_data;
pieces->inst_size = tlv_len;
break;
case IWL_UCODE_TLV_DATA:
pieces->data = tlv_data;
pieces->data_size = tlv_len;
break;
case IWL_UCODE_TLV_INIT:
pieces->init = tlv_data;
pieces->init_size = tlv_len;
break;
case IWL_UCODE_TLV_INIT_DATA:
pieces->init_data = tlv_data;
pieces->init_data_size = tlv_len;
break;
case IWL_UCODE_TLV_BOOT:
IWL_ERR(priv, "Found unexpected BOOT ucode\n");
break;
case IWL_UCODE_TLV_PROBE_MAX_LEN:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
capa->max_probe_length =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_PAN:
if (tlv_len)
goto invalid_tlv_len;
capa->flags |= IWL_UCODE_TLV_FLAGS_PAN;
break;
case IWL_UCODE_TLV_FLAGS:
/* must be at least one u32 */
if (tlv_len < sizeof(u32))
goto invalid_tlv_len;
/* and a proper number of u32s */
if (tlv_len % sizeof(u32))
goto invalid_tlv_len;
/*
* This driver only reads the first u32 as
* right now no more features are defined,
* if that changes then either the driver
* will not work with the new firmware, or
* it'll not take advantage of new features.
*/
capa->flags = le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_INIT_EVTLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->init_evtlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_INIT_EVTLOG_SIZE:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->init_evtlog_size =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_INIT_ERRLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->init_errlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_RUNT_EVTLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->inst_evtlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_RUNT_EVTLOG_SIZE:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->inst_evtlog_size =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_RUNT_ERRLOG_PTR:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
pieces->inst_errlog_ptr =
le32_to_cpup((__le32 *)tlv_data);
break;
case IWL_UCODE_TLV_ENHANCE_SENS_TBL:
if (tlv_len)
goto invalid_tlv_len;
priv->enhance_sensitivity_table = true;
break;
case IWL_UCODE_TLV_WOWLAN_INST:
pieces->wowlan_inst = tlv_data;
pieces->wowlan_inst_size = tlv_len;
break;
case IWL_UCODE_TLV_WOWLAN_DATA:
pieces->wowlan_data = tlv_data;
pieces->wowlan_data_size = tlv_len;
break;
case IWL_UCODE_TLV_PHY_CALIBRATION_SIZE:
if (tlv_len != sizeof(u32))
goto invalid_tlv_len;
capa->standard_phy_calibration_size =
le32_to_cpup((__le32 *)tlv_data);
break;
default:
IWL_DEBUG_INFO(priv, "unknown TLV: %d\n", tlv_type);
break;
}
}
if (len) {
IWL_ERR(priv, "invalid TLV after parsing: %zd\n", len);
iwl_print_hex_dump(priv, IWL_DL_FW, (u8 *)data, len);
return -EINVAL;
}
return 0;
invalid_tlv_len:
IWL_ERR(priv, "TLV %d has invalid size: %u\n", tlv_type, tlv_len);
iwl_print_hex_dump(priv, IWL_DL_FW, tlv_data, tlv_len);
return -EINVAL;
}
/**
* iwl_ucode_callback - callback when firmware was loaded
*
* If loaded successfully, copies the firmware into buffers
* for the card to fetch (via DMA).
*/
static void iwl_ucode_callback(const struct firmware *ucode_raw, void *context)
{
struct iwl_priv *priv = context;
struct iwl_ucode_header *ucode;
int err;
struct iwlagn_firmware_pieces pieces;
const unsigned int api_max = priv->cfg->ucode_api_max;
unsigned int api_ok = priv->cfg->ucode_api_ok;
const unsigned int api_min = priv->cfg->ucode_api_min;
u32 api_ver;
char buildstr[25];
u32 build;
struct iwlagn_ucode_capabilities ucode_capa = {
.max_probe_length = 200,
.standard_phy_calibration_size =
IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE,
};
if (!api_ok)
api_ok = api_max;
memset(&pieces, 0, sizeof(pieces));
if (!ucode_raw) {
if (priv->fw_index <= api_ok)
IWL_ERR(priv,
"request for firmware file '%s' failed.\n",
priv->firmware_name);
goto try_again;
}
IWL_DEBUG_INFO(priv, "Loaded firmware file '%s' (%zd bytes).\n",
priv->firmware_name, ucode_raw->size);
/* Make sure that we got at least the API version number */
if (ucode_raw->size < 4) {
IWL_ERR(priv, "File size way too small!\n");
goto try_again;
}
/* Data from ucode file: header followed by uCode images */
ucode = (struct iwl_ucode_header *)ucode_raw->data;
if (ucode->ver)
err = iwlagn_load_legacy_firmware(priv, ucode_raw, &pieces);
else
err = iwlagn_load_firmware(priv, ucode_raw, &pieces,
&ucode_capa);
if (err)
goto try_again;
api_ver = IWL_UCODE_API(priv->ucode_ver);
build = pieces.build;
/*
* api_ver should match the api version forming part of the
* firmware filename ... but we don't check for that and only rely
* on the API version read from firmware header from here on forward
*/
/* no api version check required for experimental uCode */
if (priv->fw_index != UCODE_EXPERIMENTAL_INDEX) {
if (api_ver < api_min || api_ver > api_max) {
IWL_ERR(priv,
"Driver unable to support your firmware API. "
"Driver supports v%u, firmware is v%u.\n",
api_max, api_ver);
goto try_again;
}
if (api_ver < api_ok) {
if (api_ok != api_max)
IWL_ERR(priv, "Firmware has old API version, "
"expected v%u through v%u, got v%u.\n",
api_ok, api_max, api_ver);
else
IWL_ERR(priv, "Firmware has old API version, "
"expected v%u, got v%u.\n",
api_max, api_ver);
IWL_ERR(priv, "New firmware can be obtained from "
"http://www.intellinuxwireless.org/.\n");
}
}
if (build)
sprintf(buildstr, " build %u%s", build,
(priv->fw_index == UCODE_EXPERIMENTAL_INDEX)
? " (EXP)" : "");
else
buildstr[0] = '\0';
IWL_INFO(priv, "loaded firmware version %u.%u.%u.%u%s\n",
IWL_UCODE_MAJOR(priv->ucode_ver),
IWL_UCODE_MINOR(priv->ucode_ver),
IWL_UCODE_API(priv->ucode_ver),
IWL_UCODE_SERIAL(priv->ucode_ver),
buildstr);
snprintf(priv->hw->wiphy->fw_version,
sizeof(priv->hw->wiphy->fw_version),
"%u.%u.%u.%u%s",
IWL_UCODE_MAJOR(priv->ucode_ver),
IWL_UCODE_MINOR(priv->ucode_ver),
IWL_UCODE_API(priv->ucode_ver),
IWL_UCODE_SERIAL(priv->ucode_ver),
buildstr);
/*
* For any of the failures below (before allocating pci memory)
* we will try to load a version with a smaller API -- maybe the
* user just got a corrupted version of the latest API.
*/
IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
priv->ucode_ver);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %Zd\n",
pieces.inst_size);
IWL_DEBUG_INFO(priv, "f/w package hdr runtime data size = %Zd\n",
pieces.data_size);
IWL_DEBUG_INFO(priv, "f/w package hdr init inst size = %Zd\n",
pieces.init_size);
IWL_DEBUG_INFO(priv, "f/w package hdr init data size = %Zd\n",
pieces.init_data_size);
/* Verify that uCode images will fit in card's SRAM */
if (pieces.inst_size > hw_params(priv).max_inst_size) {
IWL_ERR(priv, "uCode instr len %Zd too large to fit in\n",
pieces.inst_size);
goto try_again;
}
if (pieces.data_size > hw_params(priv).max_data_size) {
IWL_ERR(priv, "uCode data len %Zd too large to fit in\n",
pieces.data_size);
goto try_again;
}
if (pieces.init_size > hw_params(priv).max_inst_size) {
IWL_ERR(priv, "uCode init instr len %Zd too large to fit in\n",
pieces.init_size);
goto try_again;
}
if (pieces.init_data_size > hw_params(priv).max_data_size) {
IWL_ERR(priv, "uCode init data len %Zd too large to fit in\n",
pieces.init_data_size);
goto try_again;
}
/* Allocate ucode buffers for card's bus-master loading ... */
/* Runtime instructions and 2 copies of data:
* 1) unmodified from disk
* 2) backup cache for save/restore during power-downs */
if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.code,
pieces.inst, pieces.inst_size))
goto err_pci_alloc;
if (iwl_alloc_fw_desc(priv, &priv->ucode_rt.data,
pieces.data, pieces.data_size))
goto err_pci_alloc;
/* Initialization instructions and data */
if (pieces.init_size && pieces.init_data_size) {
if (iwl_alloc_fw_desc(priv, &priv->ucode_init.code,
pieces.init, pieces.init_size))
goto err_pci_alloc;
if (iwl_alloc_fw_desc(priv, &priv->ucode_init.data,
pieces.init_data, pieces.init_data_size))
goto err_pci_alloc;
}
/* WoWLAN instructions and data */
if (pieces.wowlan_inst_size && pieces.wowlan_data_size) {
if (iwl_alloc_fw_desc(priv, &priv->ucode_wowlan.code,
pieces.wowlan_inst,
pieces.wowlan_inst_size))
goto err_pci_alloc;
if (iwl_alloc_fw_desc(priv, &priv->ucode_wowlan.data,
pieces.wowlan_data,
pieces.wowlan_data_size))
goto err_pci_alloc;
}
/* Now that we can no longer fail, copy information */
/*
* The (size - 16) / 12 formula is based on the information recorded
* for each event, which is of mode 1 (including timestamp) for all
* new microcodes that include this information.
*/
priv->init_evtlog_ptr = pieces.init_evtlog_ptr;
if (pieces.init_evtlog_size)
priv->init_evtlog_size = (pieces.init_evtlog_size - 16)/12;
else
priv->init_evtlog_size =
priv->cfg->base_params->max_event_log_size;
priv->init_errlog_ptr = pieces.init_errlog_ptr;
priv->inst_evtlog_ptr = pieces.inst_evtlog_ptr;
if (pieces.inst_evtlog_size)
priv->inst_evtlog_size = (pieces.inst_evtlog_size - 16)/12;
else
priv->inst_evtlog_size =
priv->cfg->base_params->max_event_log_size;
priv->inst_errlog_ptr = pieces.inst_errlog_ptr;
priv->new_scan_threshold_behaviour =
!!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_NEWSCAN);
if (!(priv->cfg->sku & EEPROM_SKU_CAP_IPAN_ENABLE))
ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_PAN;
/*
* if not PAN, then don't support P2P -- might be a uCode
* packaging bug or due to the eeprom check above
*/
if (!(ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN))
ucode_capa.flags &= ~IWL_UCODE_TLV_FLAGS_P2P;
if (ucode_capa.flags & IWL_UCODE_TLV_FLAGS_PAN) {
priv->sta_key_max_num = STA_KEY_MAX_NUM_PAN;
priv->shrd->cmd_queue = IWL_IPAN_CMD_QUEUE_NUM;
} else {
priv->sta_key_max_num = STA_KEY_MAX_NUM;
priv->shrd->cmd_queue = IWL_DEFAULT_CMD_QUEUE_NUM;
}
/*
* figure out the offset of chain noise reset and gain commands
* base on the size of standard phy calibration commands table size
*/
if (ucode_capa.standard_phy_calibration_size >
IWL_MAX_PHY_CALIBRATE_TBL_SIZE)
ucode_capa.standard_phy_calibration_size =
IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE;
priv->phy_calib_chain_noise_reset_cmd =
ucode_capa.standard_phy_calibration_size;
priv->phy_calib_chain_noise_gain_cmd =
ucode_capa.standard_phy_calibration_size + 1;
/* initialize all valid contexts */
iwl_init_context(priv, ucode_capa.flags);
/**************************************************
* This is still part of probe() in a sense...
*
* 9. Setup and register with mac80211 and debugfs
**************************************************/
err = iwl_mac_setup_register(priv, &ucode_capa);
if (err)
goto out_unbind;
err = iwl_dbgfs_register(priv, DRV_NAME);
if (err)
IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
/* We have our copies now, allow OS release its copies */
release_firmware(ucode_raw);
complete(&priv->firmware_loading_complete);
return;
try_again:
/* try next, if any */
if (iwl_request_firmware(priv, false))
goto out_unbind;
release_firmware(ucode_raw);
return;
err_pci_alloc:
IWL_ERR(priv, "failed to allocate pci memory\n");
iwl_dealloc_ucode(priv);
out_unbind:
complete(&priv->firmware_loading_complete);
device_release_driver(priv->bus->dev);
release_firmware(ucode_raw);
}
static void iwl_rf_kill_ct_config(struct iwl_priv *priv)
{
struct iwl_ct_kill_config cmd;
struct iwl_ct_kill_throttling_config adv_cmd;
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&priv->shrd->lock, flags);
iwl_write32(bus(priv), CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
spin_unlock_irqrestore(&priv->shrd->lock, flags);
priv->thermal_throttle.ct_kill_toggle = false;
if (priv->cfg->base_params->support_ct_kill_exit) {
adv_cmd.critical_temperature_enter =
cpu_to_le32(hw_params(priv).ct_kill_threshold);
adv_cmd.critical_temperature_exit =
cpu_to_le32(hw_params(priv).ct_kill_exit_threshold);
ret = iwl_trans_send_cmd_pdu(trans(priv),
REPLY_CT_KILL_CONFIG_CMD,
CMD_SYNC, sizeof(adv_cmd), &adv_cmd);
if (ret)
IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
else
IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
"succeeded, critical temperature enter is %d,"
"exit is %d\n",
hw_params(priv).ct_kill_threshold,
hw_params(priv).ct_kill_exit_threshold);
} else {
cmd.critical_temperature_R =
cpu_to_le32(hw_params(priv).ct_kill_threshold);
ret = iwl_trans_send_cmd_pdu(trans(priv),
REPLY_CT_KILL_CONFIG_CMD,
CMD_SYNC, sizeof(cmd), &cmd);
if (ret)
IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n");
else
IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD "
"succeeded, "
"critical temperature is %d\n",
hw_params(priv).ct_kill_threshold);
}
}
static int iwlagn_send_calib_cfg_rt(struct iwl_priv *priv, u32 cfg)
{
struct iwl_calib_cfg_cmd calib_cfg_cmd;
struct iwl_host_cmd cmd = {
.id = CALIBRATION_CFG_CMD,
.len = { sizeof(struct iwl_calib_cfg_cmd), },
.data = { &calib_cfg_cmd, },
};
memset(&calib_cfg_cmd, 0, sizeof(calib_cfg_cmd));
calib_cfg_cmd.ucd_calib_cfg.once.is_enable = IWL_CALIB_INIT_CFG_ALL;
calib_cfg_cmd.ucd_calib_cfg.once.start = cpu_to_le32(cfg);
return iwl_trans_send_cmd(trans(priv), &cmd);
}
static int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
{
struct iwl_tx_ant_config_cmd tx_ant_cmd = {
.valid = cpu_to_le32(valid_tx_ant),
};
if (IWL_UCODE_API(priv->ucode_ver) > 1) {
IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
return iwl_trans_send_cmd_pdu(trans(priv),
TX_ANT_CONFIGURATION_CMD,
CMD_SYNC,
sizeof(struct iwl_tx_ant_config_cmd),
&tx_ant_cmd);
} else {
IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
return -EOPNOTSUPP;
}
}
/**
* iwl_alive_start - called after REPLY_ALIVE notification received
* from protocol/runtime uCode (initialization uCode's
* Alive gets handled by iwl_init_alive_start()).
*/
iwlwifi: support the svtool messages interactions through nl80211 test mode This patch adds the feature to support the test mode operation through the generic netlink channel NL80211_CMD_TESTMODE between intel wireless device iwlwifi and the user space application svtool. The main purpose is to create a transportation layer between the iwlwifi device and the user space application so that the interaction between the user space application svtool and the iwlwifi device in the kernel space is in a way of generic netlink messaging. The detail specific functions are: 1. The function iwl_testmode_cmd() is added to digest the svtool test command from the user space application. The svtool test commands are categorized to three types : commands to be processed by the device ucode, commands to access the registers, and commands to be processed at the driver level(such as reload the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers and reply to user space regarding the command execution status. Extra data is returned to the user space application if there's any. 2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous messages from the iwlwifi device to the user space. Regardless the message types, whenever there is a valid spontaneous message received by the iwlwifi ISR, iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user space. The message content is not attacked and the message parsing is left to the user space application. Implementation guidelines: 1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE channel, therefore, the codes need to follow the regulations set by cfg80211.ko to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi device is indicated with ieee80211_ops and can be actually accessed. Therefore, a callback iwl_testmode_cmd() is added to the structure iwlagn_hw_ops in iwl-agn.c. 2. It intends to utilize those low level device access APIs from iwlwifi device driver (ie. iwlagn.ko) rather than creating it's own set of device access functions. For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused. 3. The main functions are maintained in new files instead of spreading all over the existing iwlwifi driver files. The new files added are : drivers/net/wireless/iwlwifi/iwl-sv-open.c - to handle the user space test mode application command and reply the respective command status to the user space application. - to multicast the spontaneous messages from device to user space. drivers/net/wireless/iwlwifi/iwl-testmode.h - the commonly referenced definitions for the TLVs used in the generic netlink messages Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
int iwl_alive_start(struct iwl_priv *priv)
{
int ret = 0;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
/*TODO: this should go to the transport layer */
iwl_reset_ict(trans(priv));
IWL_DEBUG_INFO(priv, "Runtime Alive received.\n");
/* After the ALIVE response, we can send host commands to the uCode */
set_bit(STATUS_ALIVE, &priv->shrd->status);
/* Enable watchdog to monitor the driver tx queues */
iwl_setup_watchdog(priv);
if (iwl_is_rfkill(priv->shrd))
return -ERFKILL;
/* download priority table before any calibration request */
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist) {
/* Configure Bluetooth device coexistence support */
if (priv->cfg->bt_params->bt_sco_disable)
priv->bt_enable_pspoll = false;
else
priv->bt_enable_pspoll = true;
priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
iwlagn_send_advance_bt_config(priv);
priv->bt_valid = IWLAGN_BT_VALID_ENABLE_FLAGS;
priv->cur_rssi_ctx = NULL;
iwlagn_send_prio_tbl(priv);
/* FIXME: w/a to force change uCode BT state machine */
ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_OPEN,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
if (ret)
return ret;
ret = iwlagn_send_bt_env(priv, IWL_BT_COEX_ENV_CLOSE,
BT_COEX_PRIO_TBL_EVT_INIT_CALIB2);
if (ret)
return ret;
} else {
/*
* default is 2-wire BT coexexistence support
*/
iwl_send_bt_config(priv);
}
if (hw_params(priv).calib_rt_cfg)
iwlagn_send_calib_cfg_rt(priv,
hw_params(priv).calib_rt_cfg);
ieee80211_wake_queues(priv->hw);
priv->active_rate = IWL_RATES_MASK;
/* Configure Tx antenna selection based on H/W config */
iwlagn_send_tx_ant_config(priv, priv->cfg->valid_tx_ant);
if (iwl_is_associated_ctx(ctx) && !priv->shrd->wowlan) {
struct iwl_rxon_cmd *active_rxon =
(struct iwl_rxon_cmd *)&ctx->active;
/* apply any changes in staging */
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
} else {
struct iwl_rxon_context *tmp;
/* Initialize our rx_config data */
for_each_context(priv, tmp)
iwl_connection_init_rx_config(priv, tmp);
iwlagn_set_rxon_chain(priv, ctx);
}
if (!priv->shrd->wowlan) {
/* WoWLAN ucode will not reply in the same way, skip it */
iwl_reset_run_time_calib(priv);
}
set_bit(STATUS_READY, &priv->shrd->status);
/* Configure the adapter for unassociated operation */
ret = iwlagn_commit_rxon(priv, ctx);
if (ret)
return ret;
/* At this point, the NIC is initialized and operational */
iwl_rf_kill_ct_config(priv);
iwlwifi: delay firmware loading from pci_probe to network interface open This patch moves the firmware loading (read firmware from disk and load it into the device SRAM) from pci_probe time to the first network interface open time. There are two reasons for doing this: 1. To support kernel buildin iwlwifi drivers. Because kernel initializes network devices subsystem before hard disk and SATA subsystem, it is impossible to get the firmware image from hard disk in the PCI probe handler. Thus delaying the firmware loading into the network interface open time is the way to go. Note, we only read the firmware image from hard disk the first time the interface is open. After this is succeeded, we cache the firmware image into the host memory. This is a performance gain when user open and close the interface multiple times and is necessary for device suspend and resume. 2. For better power saving. When the iwlwifi modules are loaded (or buildin the kernel) but the wireless network interface is not being used, it is a good practice the wireless device consumes as less power as possible. Unloading the firmware from the wireless device and unregister the driver's interrupt handler in the network interface close handler provides users a way to achieve this. User space network configuration tools (i.e NetworkManager) can also contribute here when it detects a wired cable is connected and close the wireless interface automatically. This patch also includes the pci_save/restore_state() fixed by Ian Schram upon the first version. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-15 01:46:18 +00:00
IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
return iwl_power_update_mode(priv, true);
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv);
static void __iwl_down(struct iwl_priv *priv)
{
int exit_pending;
IWL_DEBUG_INFO(priv, DRV_NAME " is going down\n");
iwl_scan_cancel_timeout(priv, 200);
/*
* If active, scanning won't cancel it, so say it expired.
* No race since we hold the mutex here and a new one
* can't come in at this time.
*/
ieee80211_remain_on_channel_expired(priv->hw);
exit_pending =
test_and_set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
/* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
* to prevent rearm timer */
del_timer_sync(&priv->watchdog);
iwl_clear_ucode_stations(priv, NULL);
iwl_dealloc_bcast_stations(priv);
iwl_clear_driver_stations(priv);
/* reset BT coex data */
priv->bt_status = 0;
priv->cur_rssi_ctx = NULL;
priv->bt_is_sco = 0;
if (priv->cfg->bt_params)
priv->bt_traffic_load =
priv->cfg->bt_params->bt_init_traffic_load;
else
priv->bt_traffic_load = 0;
priv->bt_full_concurrent = false;
priv->bt_ci_compliance = 0;
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
if (!exit_pending)
clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
if (priv->mac80211_registered)
ieee80211_stop_queues(priv->hw);
iwl_trans_stop_device(trans(priv));
/* Clear out all status bits but a few that are stable across reset */
priv->shrd->status &=
test_bit(STATUS_RF_KILL_HW, &priv->shrd->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_GEO_CONFIGURED, &priv->shrd->status) <<
STATUS_GEO_CONFIGURED |
test_bit(STATUS_FW_ERROR, &priv->shrd->status) <<
STATUS_FW_ERROR |
test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) <<
STATUS_EXIT_PENDING;
dev_kfree_skb(priv->beacon_skb);
priv->beacon_skb = NULL;
}
static void iwl_down(struct iwl_priv *priv)
{
mutex_lock(&priv->shrd->mutex);
__iwl_down(priv);
mutex_unlock(&priv->shrd->mutex);
iwl_cancel_deferred_work(priv);
}
#define MAX_HW_RESTARTS 5
static int __iwl_up(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
int ret;
lockdep_assert_held(&priv->shrd->mutex);
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) {
IWL_WARN(priv, "Exit pending; will not bring the NIC up\n");
return -EIO;
}
for_each_context(priv, ctx) {
ret = iwlagn_alloc_bcast_station(priv, ctx);
if (ret) {
iwl_dealloc_bcast_stations(priv);
return ret;
}
}
ret = iwlagn_run_init_ucode(priv);
if (ret) {
IWL_ERR(priv, "Failed to run INIT ucode: %d\n", ret);
goto error;
}
ret = iwlagn_load_ucode_wait_alive(priv,
&priv->ucode_rt,
IWL_UCODE_REGULAR);
if (ret) {
IWL_ERR(priv, "Failed to start RT ucode: %d\n", ret);
goto error;
}
ret = iwl_alive_start(priv);
if (ret)
goto error;
return 0;
error:
set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
__iwl_down(priv);
clear_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
IWL_ERR(priv, "Unable to initialize device.\n");
return ret;
}
/*****************************************************************************
*
* Workqueue callbacks
*
*****************************************************************************/
static void iwl_bg_run_time_calib_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
run_time_calib_work);
mutex_lock(&priv->shrd->mutex);
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) ||
test_bit(STATUS_SCANNING, &priv->shrd->status)) {
mutex_unlock(&priv->shrd->mutex);
return;
}
if (priv->start_calib) {
iwl_chain_noise_calibration(priv);
iwl_sensitivity_calibration(priv);
}
mutex_unlock(&priv->shrd->mutex);
}
static void iwlagn_prepare_restart(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx;
bool bt_full_concurrent;
u8 bt_ci_compliance;
u8 bt_load;
u8 bt_status;
bool bt_is_sco;
lockdep_assert_held(&priv->shrd->mutex);
for_each_context(priv, ctx)
ctx->vif = NULL;
priv->is_open = 0;
/*
* __iwl_down() will clear the BT status variables,
* which is correct, but when we restart we really
* want to keep them so restore them afterwards.
*
* The restart process will later pick them up and
* re-configure the hw when we reconfigure the BT
* command.
*/
bt_full_concurrent = priv->bt_full_concurrent;
bt_ci_compliance = priv->bt_ci_compliance;
bt_load = priv->bt_traffic_load;
bt_status = priv->bt_status;
bt_is_sco = priv->bt_is_sco;
__iwl_down(priv);
priv->bt_full_concurrent = bt_full_concurrent;
priv->bt_ci_compliance = bt_ci_compliance;
priv->bt_traffic_load = bt_load;
priv->bt_status = bt_status;
priv->bt_is_sco = bt_is_sco;
}
static void iwl_bg_restart(struct work_struct *data)
{
struct iwl_priv *priv = container_of(data, struct iwl_priv, restart);
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
return;
if (test_and_clear_bit(STATUS_FW_ERROR, &priv->shrd->status)) {
mutex_lock(&priv->shrd->mutex);
iwlagn_prepare_restart(priv);
mutex_unlock(&priv->shrd->mutex);
iwl_cancel_deferred_work(priv);
ieee80211_restart_hw(priv->hw);
} else {
WARN_ON(1);
}
}
/*****************************************************************************
*
* mac80211 entry point functions
*
*****************************************************************************/
static const struct ieee80211_iface_limit iwlagn_sta_ap_limits[] = {
{
.max = 1,
.types = BIT(NL80211_IFTYPE_STATION),
},
{
.max = 1,
.types = BIT(NL80211_IFTYPE_AP),
},
};
static const struct ieee80211_iface_limit iwlagn_2sta_limits[] = {
{
.max = 2,
.types = BIT(NL80211_IFTYPE_STATION),
},
};
static const struct ieee80211_iface_limit iwlagn_p2p_sta_go_limits[] = {
{
.max = 1,
.types = BIT(NL80211_IFTYPE_STATION),
},
{
.max = 1,
.types = BIT(NL80211_IFTYPE_P2P_GO) |
BIT(NL80211_IFTYPE_AP),
},
};
static const struct ieee80211_iface_limit iwlagn_p2p_2sta_limits[] = {
{
.max = 2,
.types = BIT(NL80211_IFTYPE_STATION),
},
{
.max = 1,
.types = BIT(NL80211_IFTYPE_P2P_CLIENT),
},
};
static const struct ieee80211_iface_combination
iwlagn_iface_combinations_dualmode[] = {
{ .num_different_channels = 1,
.max_interfaces = 2,
.beacon_int_infra_match = true,
.limits = iwlagn_sta_ap_limits,
.n_limits = ARRAY_SIZE(iwlagn_sta_ap_limits),
},
{ .num_different_channels = 1,
.max_interfaces = 2,
.limits = iwlagn_2sta_limits,
.n_limits = ARRAY_SIZE(iwlagn_2sta_limits),
},
};
static const struct ieee80211_iface_combination
iwlagn_iface_combinations_p2p[] = {
{ .num_different_channels = 1,
.max_interfaces = 2,
.beacon_int_infra_match = true,
.limits = iwlagn_p2p_sta_go_limits,
.n_limits = ARRAY_SIZE(iwlagn_p2p_sta_go_limits),
},
{ .num_different_channels = 1,
.max_interfaces = 2,
.limits = iwlagn_p2p_2sta_limits,
.n_limits = ARRAY_SIZE(iwlagn_p2p_2sta_limits),
},
};
/*
* Not a mac80211 entry point function, but it fits in with all the
* other mac80211 functions grouped here.
*/
static int iwl_mac_setup_register(struct iwl_priv *priv,
struct iwlagn_ucode_capabilities *capa)
{
int ret;
struct ieee80211_hw *hw = priv->hw;
struct iwl_rxon_context *ctx;
hw->rate_control_algorithm = "iwl-agn-rs";
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_NEED_DTIM_PERIOD |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS;
hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
hw->flags |= IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE)
hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
IEEE80211_HW_SUPPORTS_STATIC_SMPS;
if (capa->flags & IWL_UCODE_TLV_FLAGS_MFP)
hw->flags |= IEEE80211_HW_MFP_CAPABLE;
hw->sta_data_size = sizeof(struct iwl_station_priv);
hw->vif_data_size = sizeof(struct iwl_vif_priv);
for_each_context(priv, ctx) {
hw->wiphy->interface_modes |= ctx->interface_modes;
hw->wiphy->interface_modes |= ctx->exclusive_interface_modes;
}
BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)) {
hw->wiphy->iface_combinations = iwlagn_iface_combinations_p2p;
hw->wiphy->n_iface_combinations =
ARRAY_SIZE(iwlagn_iface_combinations_p2p);
} else if (hw->wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
hw->wiphy->iface_combinations = iwlagn_iface_combinations_dualmode;
hw->wiphy->n_iface_combinations =
ARRAY_SIZE(iwlagn_iface_combinations_dualmode);
}
hw->wiphy->max_remain_on_channel_duration = 1000;
hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS |
WIPHY_FLAG_IBSS_RSN;
if (priv->ucode_wowlan.code.len && device_can_wakeup(priv->bus->dev)) {
hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT |
WIPHY_WOWLAN_DISCONNECT |
WIPHY_WOWLAN_EAP_IDENTITY_REQ |
WIPHY_WOWLAN_RFKILL_RELEASE;
if (!iwlagn_mod_params.sw_crypto)
hw->wiphy->wowlan.flags |=
WIPHY_WOWLAN_SUPPORTS_GTK_REKEY |
WIPHY_WOWLAN_GTK_REKEY_FAILURE;
hw->wiphy->wowlan.n_patterns = IWLAGN_WOWLAN_MAX_PATTERNS;
hw->wiphy->wowlan.pattern_min_len =
IWLAGN_WOWLAN_MIN_PATTERN_LEN;
hw->wiphy->wowlan.pattern_max_len =
IWLAGN_WOWLAN_MAX_PATTERN_LEN;
}
if (iwlagn_mod_params.power_save)
hw->wiphy->flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
else
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
/* we create the 802.11 header and a zero-length SSID element */
hw->wiphy->max_scan_ie_len = capa->max_probe_length - 24 - 2;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&priv->bands[IEEE80211_BAND_2GHZ];
if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&priv->bands[IEEE80211_BAND_5GHZ];
iwl_leds_init(priv);
ret = ieee80211_register_hw(priv->hw);
if (ret) {
IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
return ret;
}
priv->mac80211_registered = 1;
return 0;
}
static int iwlagn_mac_start(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
iwlwifi: delay firmware loading from pci_probe to network interface open This patch moves the firmware loading (read firmware from disk and load it into the device SRAM) from pci_probe time to the first network interface open time. There are two reasons for doing this: 1. To support kernel buildin iwlwifi drivers. Because kernel initializes network devices subsystem before hard disk and SATA subsystem, it is impossible to get the firmware image from hard disk in the PCI probe handler. Thus delaying the firmware loading into the network interface open time is the way to go. Note, we only read the firmware image from hard disk the first time the interface is open. After this is succeeded, we cache the firmware image into the host memory. This is a performance gain when user open and close the interface multiple times and is necessary for device suspend and resume. 2. For better power saving. When the iwlwifi modules are loaded (or buildin the kernel) but the wireless network interface is not being used, it is a good practice the wireless device consumes as less power as possible. Unloading the firmware from the wireless device and unregister the driver's interrupt handler in the network interface close handler provides users a way to achieve this. User space network configuration tools (i.e NetworkManager) can also contribute here when it detects a wired cable is connected and close the wireless interface automatically. This patch also includes the pci_save/restore_state() fixed by Ian Schram upon the first version. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-15 01:46:18 +00:00
int ret;
IWL_DEBUG_MAC80211(priv, "enter\n");
/* we should be verifying the device is ready to be opened */
mutex_lock(&priv->shrd->mutex);
ret = __iwl_up(priv);
mutex_unlock(&priv->shrd->mutex);
if (ret)
return ret;
IWL_DEBUG_INFO(priv, "Start UP work done.\n");
/* Now we should be done, and the READY bit should be set. */
if (WARN_ON(!test_bit(STATUS_READY, &priv->shrd->status)))
ret = -EIO;
iwlagn_led_enable(priv);
priv->is_open = 1;
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
static void iwlagn_mac_stop(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (!priv->is_open)
return;
priv->is_open = 0;
iwlwifi: delay firmware loading from pci_probe to network interface open This patch moves the firmware loading (read firmware from disk and load it into the device SRAM) from pci_probe time to the first network interface open time. There are two reasons for doing this: 1. To support kernel buildin iwlwifi drivers. Because kernel initializes network devices subsystem before hard disk and SATA subsystem, it is impossible to get the firmware image from hard disk in the PCI probe handler. Thus delaying the firmware loading into the network interface open time is the way to go. Note, we only read the firmware image from hard disk the first time the interface is open. After this is succeeded, we cache the firmware image into the host memory. This is a performance gain when user open and close the interface multiple times and is necessary for device suspend and resume. 2. For better power saving. When the iwlwifi modules are loaded (or buildin the kernel) but the wireless network interface is not being used, it is a good practice the wireless device consumes as less power as possible. Unloading the firmware from the wireless device and unregister the driver's interrupt handler in the network interface close handler provides users a way to achieve this. User space network configuration tools (i.e NetworkManager) can also contribute here when it detects a wired cable is connected and close the wireless interface automatically. This patch also includes the pci_save/restore_state() fixed by Ian Schram upon the first version. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-15 01:46:18 +00:00
iwl_down(priv);
iwlwifi: delay firmware loading from pci_probe to network interface open This patch moves the firmware loading (read firmware from disk and load it into the device SRAM) from pci_probe time to the first network interface open time. There are two reasons for doing this: 1. To support kernel buildin iwlwifi drivers. Because kernel initializes network devices subsystem before hard disk and SATA subsystem, it is impossible to get the firmware image from hard disk in the PCI probe handler. Thus delaying the firmware loading into the network interface open time is the way to go. Note, we only read the firmware image from hard disk the first time the interface is open. After this is succeeded, we cache the firmware image into the host memory. This is a performance gain when user open and close the interface multiple times and is necessary for device suspend and resume. 2. For better power saving. When the iwlwifi modules are loaded (or buildin the kernel) but the wireless network interface is not being used, it is a good practice the wireless device consumes as less power as possible. Unloading the firmware from the wireless device and unregister the driver's interrupt handler in the network interface close handler provides users a way to achieve this. User space network configuration tools (i.e NetworkManager) can also contribute here when it detects a wired cable is connected and close the wireless interface automatically. This patch also includes the pci_save/restore_state() fixed by Ian Schram upon the first version. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-15 01:46:18 +00:00
flush_workqueue(priv->shrd->workqueue);
/* User space software may expect getting rfkill changes
* even if interface is down */
iwl_write32(bus(priv), CSR_INT, 0xFFFFFFFF);
iwl_enable_rfkill_int(priv);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
#ifdef CONFIG_PM_SLEEP
static int iwlagn_send_patterns(struct iwl_priv *priv,
struct cfg80211_wowlan *wowlan)
{
struct iwlagn_wowlan_patterns_cmd *pattern_cmd;
struct iwl_host_cmd cmd = {
.id = REPLY_WOWLAN_PATTERNS,
.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
.flags = CMD_SYNC,
};
int i, err;
if (!wowlan->n_patterns)
return 0;
cmd.len[0] = sizeof(*pattern_cmd) +
wowlan->n_patterns * sizeof(struct iwlagn_wowlan_pattern);
pattern_cmd = kmalloc(cmd.len[0], GFP_KERNEL);
if (!pattern_cmd)
return -ENOMEM;
pattern_cmd->n_patterns = cpu_to_le32(wowlan->n_patterns);
for (i = 0; i < wowlan->n_patterns; i++) {
int mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
memcpy(&pattern_cmd->patterns[i].mask,
wowlan->patterns[i].mask, mask_len);
memcpy(&pattern_cmd->patterns[i].pattern,
wowlan->patterns[i].pattern,
wowlan->patterns[i].pattern_len);
pattern_cmd->patterns[i].mask_size = mask_len;
pattern_cmd->patterns[i].pattern_size =
wowlan->patterns[i].pattern_len;
}
cmd.data[0] = pattern_cmd;
err = iwl_trans_send_cmd(trans(priv), &cmd);
kfree(pattern_cmd);
return err;
}
#endif
static void iwlagn_mac_set_rekey_data(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct cfg80211_gtk_rekey_data *data)
{
struct iwl_priv *priv = hw->priv;
if (iwlagn_mod_params.sw_crypto)
return;
mutex_lock(&priv->shrd->mutex);
if (priv->contexts[IWL_RXON_CTX_BSS].vif != vif)
goto out;
memcpy(priv->kek, data->kek, NL80211_KEK_LEN);
memcpy(priv->kck, data->kck, NL80211_KCK_LEN);
priv->replay_ctr = cpu_to_le64(be64_to_cpup((__be64 *)&data->replay_ctr));
priv->have_rekey_data = true;
out:
mutex_unlock(&priv->shrd->mutex);
}
struct wowlan_key_data {
struct iwl_rxon_context *ctx;
struct iwlagn_wowlan_rsc_tsc_params_cmd *rsc_tsc;
struct iwlagn_wowlan_tkip_params_cmd *tkip;
const u8 *bssid;
bool error, use_rsc_tsc, use_tkip;
};
#ifdef CONFIG_PM_SLEEP
static void iwlagn_convert_p1k(u16 *p1k, __le16 *out)
{
int i;
for (i = 0; i < IWLAGN_P1K_SIZE; i++)
out[i] = cpu_to_le16(p1k[i]);
}
static void iwlagn_wowlan_program_keys(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key,
void *_data)
{
struct iwl_priv *priv = hw->priv;
struct wowlan_key_data *data = _data;
struct iwl_rxon_context *ctx = data->ctx;
struct aes_sc *aes_sc, *aes_tx_sc = NULL;
struct tkip_sc *tkip_sc, *tkip_tx_sc = NULL;
struct iwlagn_p1k_cache *rx_p1ks;
u8 *rx_mic_key;
struct ieee80211_key_seq seq;
u32 cur_rx_iv32 = 0;
u16 p1k[IWLAGN_P1K_SIZE];
int ret, i;
mutex_lock(&priv->shrd->mutex);
if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
!sta && !ctx->key_mapping_keys)
ret = iwl_set_default_wep_key(priv, ctx, key);
else
ret = iwl_set_dynamic_key(priv, ctx, key, sta);
if (ret) {
IWL_ERR(priv, "Error setting key during suspend!\n");
data->error = true;
}
switch (key->cipher) {
case WLAN_CIPHER_SUITE_TKIP:
if (sta) {
tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.unicast_rsc;
tkip_tx_sc = &data->rsc_tsc->all_tsc_rsc.tkip.tsc;
rx_p1ks = data->tkip->rx_uni;
ieee80211_get_key_tx_seq(key, &seq);
tkip_tx_sc->iv16 = cpu_to_le16(seq.tkip.iv16);
tkip_tx_sc->iv32 = cpu_to_le32(seq.tkip.iv32);
ieee80211_get_tkip_p1k_iv(key, seq.tkip.iv32, p1k);
iwlagn_convert_p1k(p1k, data->tkip->tx.p1k);
memcpy(data->tkip->mic_keys.tx,
&key->key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
IWLAGN_MIC_KEY_SIZE);
rx_mic_key = data->tkip->mic_keys.rx_unicast;
} else {
tkip_sc = data->rsc_tsc->all_tsc_rsc.tkip.multicast_rsc;
rx_p1ks = data->tkip->rx_multi;
rx_mic_key = data->tkip->mic_keys.rx_mcast;
}
/*
* For non-QoS this relies on the fact that both the uCode and
* mac80211 use TID 0 (as they need to to avoid replay attacks)
* for checking the IV in the frames.
*/
for (i = 0; i < IWLAGN_NUM_RSC; i++) {
ieee80211_get_key_rx_seq(key, i, &seq);
tkip_sc[i].iv16 = cpu_to_le16(seq.tkip.iv16);
tkip_sc[i].iv32 = cpu_to_le32(seq.tkip.iv32);
/* wrapping isn't allowed, AP must rekey */
if (seq.tkip.iv32 > cur_rx_iv32)
cur_rx_iv32 = seq.tkip.iv32;
}
ieee80211_get_tkip_rx_p1k(key, data->bssid, cur_rx_iv32, p1k);
iwlagn_convert_p1k(p1k, rx_p1ks[0].p1k);
ieee80211_get_tkip_rx_p1k(key, data->bssid,
cur_rx_iv32 + 1, p1k);
iwlagn_convert_p1k(p1k, rx_p1ks[1].p1k);
memcpy(rx_mic_key,
&key->key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
IWLAGN_MIC_KEY_SIZE);
data->use_tkip = true;
data->use_rsc_tsc = true;
break;
case WLAN_CIPHER_SUITE_CCMP:
if (sta) {
u8 *pn = seq.ccmp.pn;
aes_sc = data->rsc_tsc->all_tsc_rsc.aes.unicast_rsc;
aes_tx_sc = &data->rsc_tsc->all_tsc_rsc.aes.tsc;
ieee80211_get_key_tx_seq(key, &seq);
aes_tx_sc->pn = cpu_to_le64(
(u64)pn[5] |
((u64)pn[4] << 8) |
((u64)pn[3] << 16) |
((u64)pn[2] << 24) |
((u64)pn[1] << 32) |
((u64)pn[0] << 40));
} else
aes_sc = data->rsc_tsc->all_tsc_rsc.aes.multicast_rsc;
/*
* For non-QoS this relies on the fact that both the uCode and
* mac80211 use TID 0 for checking the IV in the frames.
*/
for (i = 0; i < IWLAGN_NUM_RSC; i++) {
u8 *pn = seq.ccmp.pn;
ieee80211_get_key_rx_seq(key, i, &seq);
aes_sc->pn = cpu_to_le64(
(u64)pn[5] |
((u64)pn[4] << 8) |
((u64)pn[3] << 16) |
((u64)pn[2] << 24) |
((u64)pn[1] << 32) |
((u64)pn[0] << 40));
}
data->use_rsc_tsc = true;
break;
}
mutex_unlock(&priv->shrd->mutex);
}
static int iwlagn_mac_suspend(struct ieee80211_hw *hw,
struct cfg80211_wowlan *wowlan)
{
struct iwl_priv *priv = hw->priv;
struct iwlagn_wowlan_wakeup_filter_cmd wakeup_filter_cmd;
struct iwl_rxon_cmd rxon;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct iwlagn_wowlan_kek_kck_material_cmd kek_kck_cmd;
struct iwlagn_wowlan_tkip_params_cmd tkip_cmd = {};
struct wowlan_key_data key_data = {
.ctx = ctx,
.bssid = ctx->active.bssid_addr,
.use_rsc_tsc = false,
.tkip = &tkip_cmd,
.use_tkip = false,
};
int ret, i;
u16 seq;
if (WARN_ON(!wowlan))
return -EINVAL;
mutex_lock(&priv->shrd->mutex);
/* Don't attempt WoWLAN when not associated, tear down instead. */
if (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION ||
!iwl_is_associated_ctx(ctx)) {
ret = 1;
goto out;
}
key_data.rsc_tsc = kzalloc(sizeof(*key_data.rsc_tsc), GFP_KERNEL);
if (!key_data.rsc_tsc) {
ret = -ENOMEM;
goto out;
}
memset(&wakeup_filter_cmd, 0, sizeof(wakeup_filter_cmd));
/*
* We know the last used seqno, and the uCode expects to know that
* one, it will increment before TX.
*/
seq = le16_to_cpu(priv->last_seq_ctl) & IEEE80211_SCTL_SEQ;
wakeup_filter_cmd.non_qos_seq = cpu_to_le16(seq);
/*
* For QoS counters, we store the one to use next, so subtract 0x10
* since the uCode will add 0x10 before using the value.
*/
for (i = 0; i < 8; i++) {
seq = priv->shrd->tid_data[IWL_AP_ID][i].seq_number;
seq -= 0x10;
wakeup_filter_cmd.qos_seq[i] = cpu_to_le16(seq);
}
if (wowlan->disconnect)
wakeup_filter_cmd.enabled |=
cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_BEACON_MISS |
IWLAGN_WOWLAN_WAKEUP_LINK_CHANGE);
if (wowlan->magic_pkt)
wakeup_filter_cmd.enabled |=
cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_MAGIC_PACKET);
if (wowlan->gtk_rekey_failure)
wakeup_filter_cmd.enabled |=
cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_GTK_REKEY_FAIL);
if (wowlan->eap_identity_req)
wakeup_filter_cmd.enabled |=
cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_EAP_IDENT_REQ);
if (wowlan->four_way_handshake)
wakeup_filter_cmd.enabled |=
cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_4WAY_HANDSHAKE);
if (wowlan->rfkill_release)
wakeup_filter_cmd.enabled |=
cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_RFKILL);
if (wowlan->n_patterns)
wakeup_filter_cmd.enabled |=
cpu_to_le32(IWLAGN_WOWLAN_WAKEUP_PATTERN_MATCH);
iwl_scan_cancel_timeout(priv, 200);
memcpy(&rxon, &ctx->active, sizeof(rxon));
iwl_trans_stop_device(trans(priv));
priv->shrd->wowlan = true;
ret = iwlagn_load_ucode_wait_alive(priv, &priv->ucode_wowlan,
IWL_UCODE_WOWLAN);
if (ret)
goto error;
/* now configure WoWLAN ucode */
ret = iwl_alive_start(priv);
if (ret)
goto error;
memcpy(&ctx->staging, &rxon, sizeof(rxon));
ret = iwlagn_commit_rxon(priv, ctx);
if (ret)
goto error;
ret = iwl_power_update_mode(priv, true);
if (ret)
goto error;
if (!iwlagn_mod_params.sw_crypto) {
/* mark all keys clear */
priv->ucode_key_table = 0;
ctx->key_mapping_keys = 0;
/*
* This needs to be unlocked due to lock ordering
* constraints. Since we're in the suspend path
* that isn't really a problem though.
*/
mutex_unlock(&priv->shrd->mutex);
ieee80211_iter_keys(priv->hw, ctx->vif,
iwlagn_wowlan_program_keys,
&key_data);
mutex_lock(&priv->shrd->mutex);
if (key_data.error) {
ret = -EIO;
goto error;
}
if (key_data.use_rsc_tsc) {
struct iwl_host_cmd rsc_tsc_cmd = {
.id = REPLY_WOWLAN_TSC_RSC_PARAMS,
.flags = CMD_SYNC,
.data[0] = key_data.rsc_tsc,
.dataflags[0] = IWL_HCMD_DFL_NOCOPY,
.len[0] = sizeof(*key_data.rsc_tsc),
};
ret = iwl_trans_send_cmd(trans(priv), &rsc_tsc_cmd);
if (ret)
goto error;
}
if (key_data.use_tkip) {
ret = iwl_trans_send_cmd_pdu(trans(priv),
REPLY_WOWLAN_TKIP_PARAMS,
CMD_SYNC, sizeof(tkip_cmd),
&tkip_cmd);
if (ret)
goto error;
}
if (priv->have_rekey_data) {
memset(&kek_kck_cmd, 0, sizeof(kek_kck_cmd));
memcpy(kek_kck_cmd.kck, priv->kck, NL80211_KCK_LEN);
kek_kck_cmd.kck_len = cpu_to_le16(NL80211_KCK_LEN);
memcpy(kek_kck_cmd.kek, priv->kek, NL80211_KEK_LEN);
kek_kck_cmd.kek_len = cpu_to_le16(NL80211_KEK_LEN);
kek_kck_cmd.replay_ctr = priv->replay_ctr;
ret = iwl_trans_send_cmd_pdu(trans(priv),
REPLY_WOWLAN_KEK_KCK_MATERIAL,
CMD_SYNC, sizeof(kek_kck_cmd),
&kek_kck_cmd);
if (ret)
goto error;
}
}
ret = iwl_trans_send_cmd_pdu(trans(priv), REPLY_WOWLAN_WAKEUP_FILTER,
CMD_SYNC, sizeof(wakeup_filter_cmd),
&wakeup_filter_cmd);
if (ret)
goto error;
ret = iwlagn_send_patterns(priv, wowlan);
if (ret)
goto error;
device_set_wakeup_enable(priv->bus->dev, true);
/* Now let the ucode operate on its own */
iwl_write32(bus(priv), CSR_UCODE_DRV_GP1_SET,
CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
goto out;
error:
priv->shrd->wowlan = false;
iwlagn_prepare_restart(priv);
ieee80211_restart_hw(priv->hw);
out:
mutex_unlock(&priv->shrd->mutex);
kfree(key_data.rsc_tsc);
return ret;
}
static int iwlagn_mac_resume(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
struct ieee80211_vif *vif;
unsigned long flags;
u32 base, status = 0xffffffff;
int ret = -EIO;
mutex_lock(&priv->shrd->mutex);
iwl_write32(bus(priv), CSR_UCODE_DRV_GP1_CLR,
CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE);
base = priv->device_pointers.error_event_table;
if (iwlagn_hw_valid_rtc_data_addr(base)) {
spin_lock_irqsave(&bus(priv)->reg_lock, flags);
ret = iwl_grab_nic_access_silent(bus(priv));
if (ret == 0) {
iwl_write32(bus(priv), HBUS_TARG_MEM_RADDR, base);
status = iwl_read32(bus(priv), HBUS_TARG_MEM_RDAT);
iwl_release_nic_access(bus(priv));
}
spin_unlock_irqrestore(&bus(priv)->reg_lock, flags);
#ifdef CONFIG_IWLWIFI_DEBUGFS
if (ret == 0) {
if (!priv->wowlan_sram)
priv->wowlan_sram =
kzalloc(priv->ucode_wowlan.data.len,
GFP_KERNEL);
if (priv->wowlan_sram)
_iwl_read_targ_mem_words(
bus(priv), 0x800000, priv->wowlan_sram,
priv->ucode_wowlan.data.len / 4);
}
#endif
}
/* we'll clear ctx->vif during iwlagn_prepare_restart() */
vif = ctx->vif;
priv->shrd->wowlan = false;
device_set_wakeup_enable(priv->bus->dev, false);
iwlagn_prepare_restart(priv);
memset((void *)&ctx->active, 0, sizeof(ctx->active));
iwl_connection_init_rx_config(priv, ctx);
iwlagn_set_rxon_chain(priv, ctx);
mutex_unlock(&priv->shrd->mutex);
ieee80211_resume_disconnect(vif);
return 1;
}
#endif
static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct iwl_priv *priv = hw->priv;
IWL_DEBUG_MACDUMP(priv, "enter\n");
IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
if (iwlagn_tx_skb(priv, skb))
dev_kfree_skb_any(skb);
IWL_DEBUG_MACDUMP(priv, "leave\n");
}
static void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_key_conf *keyconf,
struct ieee80211_sta *sta,
u32 iv32, u16 *phase1key)
{
struct iwl_priv *priv = hw->priv;
iwl_update_tkip_key(priv, vif, keyconf, sta, iv32, phase1key);
}
static int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct ieee80211_key_conf *key)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *ctx = vif_priv->ctx;
int ret;
bool is_default_wep_key = false;
IWL_DEBUG_MAC80211(priv, "enter\n");
if (iwlagn_mod_params.sw_crypto) {
IWL_DEBUG_MAC80211(priv, "leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
/*
* We could program these keys into the hardware as well, but we
* don't expect much multicast traffic in IBSS and having keys
* for more stations is probably more useful.
*
* Mark key TX-only and return 0.
*/
if (vif->type == NL80211_IFTYPE_ADHOC &&
!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
key->hw_key_idx = WEP_INVALID_OFFSET;
return 0;
}
/* If they key was TX-only, accept deletion */
if (cmd == DISABLE_KEY && key->hw_key_idx == WEP_INVALID_OFFSET)
return 0;
mutex_lock(&priv->shrd->mutex);
iwl_scan_cancel_timeout(priv, 100);
BUILD_BUG_ON(WEP_INVALID_OFFSET == IWLAGN_HW_KEY_DEFAULT);
/*
* If we are getting WEP group key and we didn't receive any key mapping
* so far, we are in legacy wep mode (group key only), otherwise we are
* in 1X mode.
* In legacy wep mode, we use another host command to the uCode.
*/
if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) {
if (cmd == SET_KEY)
is_default_wep_key = !ctx->key_mapping_keys;
else
is_default_wep_key =
key->hw_key_idx == IWLAGN_HW_KEY_DEFAULT;
}
switch (cmd) {
case SET_KEY:
if (is_default_wep_key) {
ret = iwl_set_default_wep_key(priv, vif_priv->ctx, key);
break;
}
ret = iwl_set_dynamic_key(priv, vif_priv->ctx, key, sta);
if (ret) {
/*
* can't add key for RX, but we don't need it
* in the device for TX so still return 0
*/
ret = 0;
key->hw_key_idx = WEP_INVALID_OFFSET;
}
IWL_DEBUG_MAC80211(priv, "enable hwcrypto key\n");
break;
case DISABLE_KEY:
if (is_default_wep_key)
ret = iwl_remove_default_wep_key(priv, ctx, key);
else
ret = iwl_remove_dynamic_key(priv, ctx, key, sta);
IWL_DEBUG_MAC80211(priv, "disable hwcrypto key\n");
break;
default:
ret = -EINVAL;
}
mutex_unlock(&priv->shrd->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
return ret;
}
static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn,
u8 buf_size)
{
struct iwl_priv *priv = hw->priv;
int ret = -EINVAL;
struct iwl_station_priv *sta_priv = (void *) sta->drv_priv;
struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n",
sta->addr, tid);
if (!(priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE))
return -EACCES;
mutex_lock(&priv->shrd->mutex);
switch (action) {
case IEEE80211_AMPDU_RX_START:
IWL_DEBUG_HT(priv, "start Rx\n");
ret = iwl_sta_rx_agg_start(priv, sta, tid, *ssn);
break;
case IEEE80211_AMPDU_RX_STOP:
IWL_DEBUG_HT(priv, "stop Rx\n");
ret = iwl_sta_rx_agg_stop(priv, sta, tid);
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
ret = 0;
break;
case IEEE80211_AMPDU_TX_START:
IWL_DEBUG_HT(priv, "start Tx\n");
ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn);
if (ret == 0) {
priv->agg_tids_count++;
IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
priv->agg_tids_count);
}
break;
case IEEE80211_AMPDU_TX_STOP:
IWL_DEBUG_HT(priv, "stop Tx\n");
ret = iwlagn_tx_agg_stop(priv, vif, sta, tid);
if ((ret == 0) && (priv->agg_tids_count > 0)) {
priv->agg_tids_count--;
IWL_DEBUG_HT(priv, "priv->agg_tids_count = %u\n",
priv->agg_tids_count);
}
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status))
ret = 0;
if (priv->cfg->ht_params &&
priv->cfg->ht_params->use_rts_for_aggregation) {
/*
* switch off RTS/CTS if it was previously enabled
*/
sta_priv->lq_sta.lq.general_params.flags &=
~LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
&sta_priv->lq_sta.lq, CMD_ASYNC, false);
}
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
buf_size = min_t(int, buf_size, LINK_QUAL_AGG_FRAME_LIMIT_DEF);
iwl_trans_tx_agg_setup(trans(priv), ctx->ctxid, iwl_sta_id(sta),
tid, buf_size);
/*
* If the limit is 0, then it wasn't initialised yet,
* use the default. We can do that since we take the
* minimum below, and we don't want to go above our
* default due to hardware restrictions.
*/
if (sta_priv->max_agg_bufsize == 0)
sta_priv->max_agg_bufsize =
LINK_QUAL_AGG_FRAME_LIMIT_DEF;
/*
* Even though in theory the peer could have different
* aggregation reorder buffer sizes for different sessions,
* our ucode doesn't allow for that and has a global limit
* for each station. Therefore, use the minimum of all the
* aggregation sessions and our default value.
*/
sta_priv->max_agg_bufsize =
min(sta_priv->max_agg_bufsize, buf_size);
if (priv->cfg->ht_params &&
priv->cfg->ht_params->use_rts_for_aggregation) {
/*
* switch to RTS/CTS if it is the prefer protection
* method for HT traffic
*/
sta_priv->lq_sta.lq.general_params.flags |=
LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK;
}
sta_priv->lq_sta.lq.agg_params.agg_frame_cnt_limit =
sta_priv->max_agg_bufsize;
iwl_send_lq_cmd(priv, iwl_rxon_ctx_from_vif(vif),
&sta_priv->lq_sta.lq, CMD_ASYNC, false);
IWL_INFO(priv, "Tx aggregation enabled on ra = %pM tid = %d\n",
sta->addr, tid);
ret = 0;
break;
}
mutex_unlock(&priv->shrd->mutex);
return ret;
}
static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct iwl_priv *priv = hw->priv;
struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
bool is_ap = vif->type == NL80211_IFTYPE_STATION;
int ret;
u8 sta_id;
IWL_DEBUG_INFO(priv, "received request to add station %pM\n",
sta->addr);
mutex_lock(&priv->shrd->mutex);
IWL_DEBUG_INFO(priv, "proceeding to add station %pM\n",
sta->addr);
sta_priv->common.sta_id = IWL_INVALID_STATION;
atomic_set(&sta_priv->pending_frames, 0);
if (vif->type == NL80211_IFTYPE_AP)
sta_priv->client = true;
ret = iwl_add_station_common(priv, vif_priv->ctx, sta->addr,
is_ap, sta, &sta_id);
if (ret) {
IWL_ERR(priv, "Unable to add station %pM (%d)\n",
sta->addr, ret);
/* Should we return success if return code is EEXIST ? */
mutex_unlock(&priv->shrd->mutex);
return ret;
}
sta_priv->common.sta_id = sta_id;
/* Initialize rate scaling */
IWL_DEBUG_INFO(priv, "Initializing rate scaling for station %pM\n",
sta->addr);
iwl_rs_rate_init(priv, sta, sta_id);
mutex_unlock(&priv->shrd->mutex);
return 0;
}
static void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch)
{
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_channel *channel = ch_switch->channel;
struct iwl_ht_config *ht_conf = &priv->current_ht_config;
/*
* MULTI-FIXME
* When we add support for multiple interfaces, we need to
* revisit this. The channel switch command in the device
* only affects the BSS context, but what does that really
* mean? And what if we get a CSA on the second interface?
* This needs a lot of work.
*/
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
u16 ch;
IWL_DEBUG_MAC80211(priv, "enter\n");
mutex_lock(&priv->shrd->mutex);
if (iwl_is_rfkill(priv->shrd))
goto out;
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status) ||
test_bit(STATUS_SCANNING, &priv->shrd->status) ||
test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status))
goto out;
if (!iwl_is_associated_ctx(ctx))
goto out;
if (!priv->cfg->lib->set_channel_switch)
goto out;
ch = channel->hw_value;
if (le16_to_cpu(ctx->active.channel) == ch)
goto out;
ch_info = iwl_get_channel_info(priv, channel->band, ch);
if (!is_channel_valid(ch_info)) {
IWL_DEBUG_MAC80211(priv, "invalid channel\n");
goto out;
}
spin_lock_irq(&priv->shrd->lock);
priv->current_ht_config.smps = conf->smps_mode;
/* Configure HT40 channels */
ctx->ht.enabled = conf_is_ht(conf);
if (ctx->ht.enabled) {
if (conf_is_ht40_minus(conf)) {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_BELOW;
ctx->ht.is_40mhz = true;
} else if (conf_is_ht40_plus(conf)) {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
ctx->ht.is_40mhz = true;
} else {
ctx->ht.extension_chan_offset =
IEEE80211_HT_PARAM_CHA_SEC_NONE;
ctx->ht.is_40mhz = false;
}
} else
ctx->ht.is_40mhz = false;
if ((le16_to_cpu(ctx->staging.channel) != ch))
ctx->staging.flags = 0;
iwl_set_rxon_channel(priv, channel, ctx);
iwl_set_rxon_ht(priv, ht_conf);
iwl_set_flags_for_band(priv, ctx, channel->band, ctx->vif);
spin_unlock_irq(&priv->shrd->lock);
iwl_set_rate(priv);
/*
* at this point, staging_rxon has the
* configuration for channel switch
*/
set_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status);
priv->switch_channel = cpu_to_le16(ch);
if (priv->cfg->lib->set_channel_switch(priv, ch_switch)) {
clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->shrd->status);
priv->switch_channel = 0;
ieee80211_chswitch_done(ctx->vif, false);
}
out:
mutex_unlock(&priv->shrd->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
static void iwlagn_configure_filter(struct ieee80211_hw *hw,
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast)
{
struct iwl_priv *priv = hw->priv;
__le32 filter_or = 0, filter_nand = 0;
struct iwl_rxon_context *ctx;
#define CHK(test, flag) do { \
if (*total_flags & (test)) \
filter_or |= (flag); \
else \
filter_nand |= (flag); \
} while (0)
IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n",
changed_flags, *total_flags);
CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
/* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
#undef CHK
mutex_lock(&priv->shrd->mutex);
for_each_context(priv, ctx) {
ctx->staging.filter_flags &= ~filter_nand;
ctx->staging.filter_flags |= filter_or;
/*
* Not committing directly because hardware can perform a scan,
* but we'll eventually commit the filter flags change anyway.
*/
}
mutex_unlock(&priv->shrd->mutex);
/*
* Receiving all multicast frames is always enabled by the
* default flags setup in iwl_connection_init_rx_config()
* since we currently do not support programming multicast
* filters into the device.
*/
*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
static void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
{
struct iwl_priv *priv = hw->priv;
mutex_lock(&priv->shrd->mutex);
IWL_DEBUG_MAC80211(priv, "enter\n");
if (test_bit(STATUS_EXIT_PENDING, &priv->shrd->status)) {
IWL_DEBUG_TX(priv, "Aborting flush due to device shutdown\n");
goto done;
}
if (iwl_is_rfkill(priv->shrd)) {
IWL_DEBUG_TX(priv, "Aborting flush due to RF Kill\n");
goto done;
}
/*
* mac80211 will not push any more frames for transmit
* until the flush is completed
*/
if (drop) {
IWL_DEBUG_MAC80211(priv, "send flush command\n");
if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) {
IWL_ERR(priv, "flush request fail\n");
goto done;
}
}
IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
iwl_trans_wait_tx_queue_empty(trans(priv));
done:
mutex_unlock(&priv->shrd->mutex);
IWL_DEBUG_MAC80211(priv, "leave\n");
}
void iwlagn_disable_roc(struct iwl_priv *priv)
{
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
lockdep_assert_held(&priv->shrd->mutex);
if (!priv->hw_roc_setup)
return;
ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
priv->hw_roc_channel = NULL;
memset(ctx->staging.node_addr, 0, ETH_ALEN);
iwlagn_commit_rxon(priv, ctx);
ctx->is_active = false;
priv->hw_roc_setup = false;
}
static void iwlagn_disable_roc_work(struct work_struct *work)
{
struct iwl_priv *priv = container_of(work, struct iwl_priv,
hw_roc_disable_work.work);
mutex_lock(&priv->shrd->mutex);
iwlagn_disable_roc(priv);
mutex_unlock(&priv->shrd->mutex);
}
static int iwl_mac_remain_on_channel(struct ieee80211_hw *hw,
struct ieee80211_channel *channel,
enum nl80211_channel_type channel_type,
int duration)
{
struct iwl_priv *priv = hw->priv;
struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_PAN];
int err = 0;
if (!(priv->shrd->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
return -EOPNOTSUPP;
if (!(ctx->interface_modes & BIT(NL80211_IFTYPE_P2P_CLIENT)))
return -EOPNOTSUPP;
mutex_lock(&priv->shrd->mutex);
/*
* TODO: Remove this hack! Firmware needs to be updated
* to allow longer off-channel periods in scanning for
* this use case, based on a flag (and we'll need an API
* flag in the firmware when it has that).
*/
if (iwl_is_associated(priv, IWL_RXON_CTX_BSS) && duration > 80)
duration = 80;
if (test_bit(STATUS_SCAN_HW, &priv->shrd->status)) {
err = -EBUSY;
goto out;
}
priv->hw_roc_channel = channel;
priv->hw_roc_chantype = channel_type;
priv->hw_roc_duration = duration;
cancel_delayed_work(&priv->hw_roc_disable_work);
if (!ctx->is_active) {
ctx->is_active = true;
ctx->staging.dev_type = RXON_DEV_TYPE_P2P;
memcpy(ctx->staging.node_addr,
priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr,
ETH_ALEN);
memcpy(ctx->staging.bssid_addr,
priv->contexts[IWL_RXON_CTX_BSS].staging.node_addr,
ETH_ALEN);
err = iwlagn_commit_rxon(priv, ctx);
if (err)
goto out;
ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK |
RXON_FILTER_PROMISC_MSK |
RXON_FILTER_CTL2HOST_MSK;
err = iwlagn_commit_rxon(priv, ctx);
if (err) {
iwlagn_disable_roc(priv);
goto out;
}
priv->hw_roc_setup = true;
}
err = iwl_scan_initiate(priv, ctx->vif, IWL_SCAN_ROC, channel->band);
if (err)
iwlagn_disable_roc(priv);
out:
mutex_unlock(&priv->shrd->mutex);
return err;
}
static int iwl_mac_cancel_remain_on_channel(struct ieee80211_hw *hw)
{
struct iwl_priv *priv = hw->priv;
if (!(priv->shrd->valid_contexts & BIT(IWL_RXON_CTX_PAN)))
return -EOPNOTSUPP;
mutex_lock(&priv->shrd->mutex);
iwl_scan_cancel_timeout(priv, priv->hw_roc_duration);
iwlagn_disable_roc(priv);
mutex_unlock(&priv->shrd->mutex);
return 0;
}
static int iwl_mac_tx_sync(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
const u8 *bssid, enum ieee80211_tx_sync_type type)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *ctx = vif_priv->ctx;
int ret;
u8 sta_id;
mutex_lock(&priv->shrd->mutex);
if (iwl_is_associated_ctx(ctx)) {
ret = 0;
goto out;
}
if (ctx->preauth_bssid || test_bit(STATUS_SCAN_HW, &priv->shrd->status)) {
ret = -EBUSY;
goto out;
}
ret = iwl_add_station_common(priv, ctx, bssid, true, NULL, &sta_id);
if (ret)
goto out;
if (WARN_ON(sta_id != ctx->ap_sta_id)) {
ret = -EIO;
goto out_remove_sta;
}
memcpy(ctx->bssid, bssid, ETH_ALEN);
ctx->preauth_bssid = true;
ret = iwlagn_commit_rxon(priv, ctx);
if (ret == 0)
goto out;
out_remove_sta:
iwl_remove_station(priv, sta_id, bssid);
out:
mutex_unlock(&priv->shrd->mutex);
return ret;
}
static void iwl_mac_finish_tx_sync(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
const u8 *bssid,
enum ieee80211_tx_sync_type type)
{
struct iwl_priv *priv = hw->priv;
struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
struct iwl_rxon_context *ctx = vif_priv->ctx;
mutex_lock(&priv->shrd->mutex);
if (iwl_is_associated_ctx(ctx))
goto out;
iwl_remove_station(priv, ctx->ap_sta_id, bssid);
ctx->preauth_bssid = false;
/* no need to commit */
out:
mutex_unlock(&priv->shrd->mutex);
}
/*****************************************************************************
*
* driver setup and teardown
*
*****************************************************************************/
static void iwl_setup_deferred_work(struct iwl_priv *priv)
{
priv->shrd->workqueue = create_singlethread_workqueue(DRV_NAME);
init_waitqueue_head(&priv->shrd->wait_command_queue);
INIT_WORK(&priv->restart, iwl_bg_restart);
INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
INIT_WORK(&priv->bt_full_concurrency, iwl_bg_bt_full_concurrency);
INIT_WORK(&priv->bt_runtime_config, iwl_bg_bt_runtime_config);
INIT_DELAYED_WORK(&priv->hw_roc_disable_work,
iwlagn_disable_roc_work);
iwl_setup_scan_deferred_work(priv);
if (priv->cfg->lib->bt_setup_deferred_work)
priv->cfg->lib->bt_setup_deferred_work(priv);
init_timer(&priv->statistics_periodic);
priv->statistics_periodic.data = (unsigned long)priv;
priv->statistics_periodic.function = iwl_bg_statistics_periodic;
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
init_timer(&priv->ucode_trace);
priv->ucode_trace.data = (unsigned long)priv;
priv->ucode_trace.function = iwl_bg_ucode_trace;
init_timer(&priv->watchdog);
priv->watchdog.data = (unsigned long)priv;
priv->watchdog.function = iwl_bg_watchdog;
}
static void iwl_cancel_deferred_work(struct iwl_priv *priv)
{
if (priv->cfg->lib->cancel_deferred_work)
priv->cfg->lib->cancel_deferred_work(priv);
cancel_work_sync(&priv->run_time_calib_work);
cancel_work_sync(&priv->beacon_update);
iwl_cancel_scan_deferred_work(priv);
cancel_work_sync(&priv->bt_full_concurrency);
cancel_work_sync(&priv->bt_runtime_config);
cancel_delayed_work_sync(&priv->hw_roc_disable_work);
del_timer_sync(&priv->statistics_periodic);
iwlwifi: add continuous uCode event log capability In order to help uCode debugging, adding the capability to provide continuous uCode event logging function. uCode events is located in round-robin event queue and filled by uCode, by enable continuous event logging, driver check the write pointer and log the newly added events in iwl_bg_ucode_trace() timer function. There is still possibility of missing events if event queue being wrapped before next event dump; but with this capability, we can have much better understanding of the uCode behavior during runtime; it can help to debug the uCode related issues. Methods to enable/disable the continuous event log: step 1: enable ucode trace timer "echo 1 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" step 2: start ftrace sudo ./trace-cmd record -e iwlwifi_ucode:* sleep 1d step 3: stop ftrace sudo ./trace-cmd report trace.dat step 4: disable ucode trace timer "echo 0 > /sys/kernel/debug/ieee80211/phyX/iwlagn/debug/ucode_tracing" use "ucode_tracing" debugfs file to display number of event queue wrapped when driver attempt the continuous event logging. If event queue being wrapped more than once when driver has opportunity to log the event; it indicated there are events missing in the event log trace. This continuous event log function only available for 4965 and newer NICs. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 22:37:26 +00:00
del_timer_sync(&priv->ucode_trace);
}
static void iwl_init_hw_rates(struct iwl_priv *priv,
struct ieee80211_rate *rates)
{
int i;
for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
rates[i].bitrate = iwl_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
rates[i].flags = 0;
if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
/*
* If CCK != 1M then set short preamble rate flag.
*/
rates[i].flags |=
(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
0 : IEEE80211_RATE_SHORT_PREAMBLE;
}
}
}
static int iwl_init_drv(struct iwl_priv *priv)
{
int ret;
spin_lock_init(&priv->shrd->sta_lock);
mutex_init(&priv->shrd->mutex);
priv->ieee_channels = NULL;
priv->ieee_rates = NULL;
priv->band = IEEE80211_BAND_2GHZ;
priv->iw_mode = NL80211_IFTYPE_STATION;
priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
priv->agg_tids_count = 0;
/* initialize force reset */
priv->force_reset[IWL_RF_RESET].reset_duration =
IWL_DELAY_NEXT_FORCE_RF_RESET;
priv->force_reset[IWL_FW_RESET].reset_duration =
IWL_DELAY_NEXT_FORCE_FW_RELOAD;
priv->rx_statistics_jiffies = jiffies;
/* Choose which receivers/antennas to use */
iwlagn_set_rxon_chain(priv, &priv->contexts[IWL_RXON_CTX_BSS]);
iwl_init_scan_params(priv);
/* init bt coex */
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist) {
priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT;
priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT;
priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK;
priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
priv->bt_duration = BT_DURATION_LIMIT_DEF;
priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
}
ret = iwl_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
goto err;
}
ret = iwl_init_geos(priv);
if (ret) {
IWL_ERR(priv, "initializing geos failed: %d\n", ret);
goto err_free_channel_map;
}
iwl_init_hw_rates(priv, priv->ieee_rates);
return 0;
err_free_channel_map:
iwl_free_channel_map(priv);
err:
return ret;
}
static void iwl_uninit_drv(struct iwl_priv *priv)
{
iwl_calib_free_results(priv);
iwl_free_geos(priv);
iwl_free_channel_map(priv);
if (priv->tx_cmd_pool)
kmem_cache_destroy(priv->tx_cmd_pool);
kfree(priv->scan_cmd);
kfree(priv->beacon_cmd);
#ifdef CONFIG_IWLWIFI_DEBUGFS
kfree(priv->wowlan_sram);
#endif
}
static void iwl_mac_rssi_callback(struct ieee80211_hw *hw,
enum ieee80211_rssi_event rssi_event)
{
struct iwl_priv *priv = hw->priv;
mutex_lock(&priv->shrd->mutex);
if (priv->cfg->bt_params &&
priv->cfg->bt_params->advanced_bt_coexist) {
if (rssi_event == RSSI_EVENT_LOW)
priv->bt_enable_pspoll = true;
else if (rssi_event == RSSI_EVENT_HIGH)
priv->bt_enable_pspoll = false;
iwlagn_send_advance_bt_config(priv);
} else {
IWL_DEBUG_MAC80211(priv, "Advanced BT coex disabled,"
"ignoring RSSI callback\n");
}
mutex_unlock(&priv->shrd->mutex);
}
struct ieee80211_ops iwlagn_hw_ops = {
.tx = iwlagn_mac_tx,
.start = iwlagn_mac_start,
.stop = iwlagn_mac_stop,
#ifdef CONFIG_PM_SLEEP
.suspend = iwlagn_mac_suspend,
.resume = iwlagn_mac_resume,
#endif
.add_interface = iwl_mac_add_interface,
.remove_interface = iwl_mac_remove_interface,
.change_interface = iwl_mac_change_interface,
.config = iwlagn_mac_config,
.configure_filter = iwlagn_configure_filter,
.set_key = iwlagn_mac_set_key,
.update_tkip_key = iwlagn_mac_update_tkip_key,
.set_rekey_data = iwlagn_mac_set_rekey_data,
.conf_tx = iwl_mac_conf_tx,
.bss_info_changed = iwlagn_bss_info_changed,
.ampdu_action = iwlagn_mac_ampdu_action,
.hw_scan = iwl_mac_hw_scan,
.sta_notify = iwlagn_mac_sta_notify,
.sta_add = iwlagn_mac_sta_add,
.sta_remove = iwl_mac_sta_remove,
.channel_switch = iwlagn_mac_channel_switch,
.flush = iwlagn_mac_flush,
.tx_last_beacon = iwl_mac_tx_last_beacon,
.remain_on_channel = iwl_mac_remain_on_channel,
.cancel_remain_on_channel = iwl_mac_cancel_remain_on_channel,
.rssi_callback = iwl_mac_rssi_callback,
iwlwifi: support the svtool messages interactions through nl80211 test mode This patch adds the feature to support the test mode operation through the generic netlink channel NL80211_CMD_TESTMODE between intel wireless device iwlwifi and the user space application svtool. The main purpose is to create a transportation layer between the iwlwifi device and the user space application so that the interaction between the user space application svtool and the iwlwifi device in the kernel space is in a way of generic netlink messaging. The detail specific functions are: 1. The function iwl_testmode_cmd() is added to digest the svtool test command from the user space application. The svtool test commands are categorized to three types : commands to be processed by the device ucode, commands to access the registers, and commands to be processed at the driver level(such as reload the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers and reply to user space regarding the command execution status. Extra data is returned to the user space application if there's any. 2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous messages from the iwlwifi device to the user space. Regardless the message types, whenever there is a valid spontaneous message received by the iwlwifi ISR, iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user space. The message content is not attacked and the message parsing is left to the user space application. Implementation guidelines: 1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE channel, therefore, the codes need to follow the regulations set by cfg80211.ko to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi device is indicated with ieee80211_ops and can be actually accessed. Therefore, a callback iwl_testmode_cmd() is added to the structure iwlagn_hw_ops in iwl-agn.c. 2. It intends to utilize those low level device access APIs from iwlwifi device driver (ie. iwlagn.ko) rather than creating it's own set of device access functions. For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused. 3. The main functions are maintained in new files instead of spreading all over the existing iwlwifi driver files. The new files added are : drivers/net/wireless/iwlwifi/iwl-sv-open.c - to handle the user space test mode application command and reply the respective command status to the user space application. - to multicast the spontaneous messages from device to user space. drivers/net/wireless/iwlwifi/iwl-testmode.h - the commonly referenced definitions for the TLVs used in the generic netlink messages Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
CFG80211_TESTMODE_CMD(iwl_testmode_cmd)
CFG80211_TESTMODE_DUMP(iwl_testmode_dump)
.tx_sync = iwl_mac_tx_sync,
.finish_tx_sync = iwl_mac_finish_tx_sync,
};
static u32 iwl_hw_detect(struct iwl_priv *priv)
{
return iwl_read32(bus(priv), CSR_HW_REV);
}
/* Size of one Rx buffer in host DRAM */
#define IWL_RX_BUF_SIZE_4K (4 * 1024)
#define IWL_RX_BUF_SIZE_8K (8 * 1024)
static int iwl_set_hw_params(struct iwl_priv *priv)
{
if (iwlagn_mod_params.amsdu_size_8K)
hw_params(priv).rx_page_order =
get_order(IWL_RX_BUF_SIZE_8K);
else
hw_params(priv).rx_page_order =
get_order(IWL_RX_BUF_SIZE_4K);
if (iwlagn_mod_params.disable_11n)
priv->cfg->sku &= ~EEPROM_SKU_CAP_11N_ENABLE;
hw_params(priv).num_ampdu_queues =
priv->cfg->base_params->num_of_ampdu_queues;
hw_params(priv).shadow_reg_enable =
priv->cfg->base_params->shadow_reg_enable;
hw_params(priv).sku = priv->cfg->sku;
hw_params(priv).wd_timeout = priv->cfg->base_params->wd_timeout;
/* Device-specific setup */
return priv->cfg->lib->set_hw_params(priv);
}
/* This function both allocates and initializes hw and priv. */
static struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
{
struct iwl_priv *priv;
/* mac80211 allocates memory for this device instance, including
* space for this driver's private structure */
struct ieee80211_hw *hw;
hw = ieee80211_alloc_hw(sizeof(struct iwl_priv), &iwlagn_hw_ops);
if (hw == NULL) {
pr_err("%s: Can not allocate network device\n",
cfg->name);
goto out;
}
priv = hw->priv;
priv->hw = hw;
out:
return hw;
}
int iwl_probe(struct iwl_bus *bus, const struct iwl_trans_ops *trans_ops,
struct iwl_cfg *cfg)
{
int err = 0;
struct iwl_priv *priv;
struct ieee80211_hw *hw;
u16 num_mac;
u32 hw_rev;
/************************
* 1. Allocating HW data
************************/
hw = iwl_alloc_all(cfg);
if (!hw) {
err = -ENOMEM;
goto out;
}
priv = hw->priv;
priv->bus = bus;
priv->shrd = &priv->_shrd;
priv->shrd->bus = bus;
priv->shrd->priv = priv;
bus_set_drv_data(priv->bus, priv->shrd);
priv->shrd->trans = trans_ops->alloc(priv->shrd);
if (priv->shrd->trans == NULL) {
err = -ENOMEM;
goto out_free_traffic_mem;
}
/* At this point both hw and priv are allocated. */
SET_IEEE80211_DEV(hw, priv->bus->dev);
IWL_DEBUG_INFO(priv, "*** LOAD DRIVER ***\n");
priv->cfg = cfg;
/* is antenna coupling more than 35dB ? */
priv->bt_ant_couple_ok =
(iwlagn_mod_params.ant_coupling >
IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
true : false;
/* enable/disable bt channel inhibition */
priv->bt_ch_announce = iwlagn_mod_params.bt_ch_announce;
IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
(priv->bt_ch_announce) ? "On" : "Off");
if (iwl_alloc_traffic_mem(priv))
IWL_ERR(priv, "Not enough memory to generate traffic log\n");
/* these spin locks will be used in apm_ops.init and EEPROM access
* we should init now
*/
spin_lock_init(&bus(priv)->reg_lock);
spin_lock_init(&priv->shrd->lock);
/*
* stop and reset the on-board processor just in case it is in a
* strange state ... like being left stranded by a primary kernel
* and this is now the kdump kernel trying to start up
*/
iwl_write32(bus(priv), CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
/***********************
* 3. Read REV register
***********************/
hw_rev = iwl_hw_detect(priv);
IWL_INFO(priv, "Detected %s, REV=0x%X\n",
priv->cfg->name, hw_rev);
err = iwl_trans_request_irq(trans(priv));
if (err)
goto out_free_trans;
if (iwl_trans_prepare_card_hw(trans(priv))) {
err = -EIO;
IWL_WARN(priv, "Failed, HW not ready\n");
goto out_free_trans;
}
/*****************
* 4. Read EEPROM
*****************/
/* Read the EEPROM */
err = iwl_eeprom_init(priv, hw_rev);
if (err) {
IWL_ERR(priv, "Unable to init EEPROM\n");
goto out_free_trans;
}
err = iwl_eeprom_check_version(priv);
if (err)
goto out_free_eeprom;
err = iwl_eeprom_check_sku(priv);
if (err)
goto out_free_eeprom;
/* extract MAC Address */
iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
priv->hw->wiphy->addresses = priv->addresses;
priv->hw->wiphy->n_addresses = 1;
num_mac = iwl_eeprom_query16(priv, EEPROM_NUM_MAC_ADDRESS);
if (num_mac > 1) {
memcpy(priv->addresses[1].addr, priv->addresses[0].addr,
ETH_ALEN);
priv->addresses[1].addr[5]++;
priv->hw->wiphy->n_addresses++;
}
/************************
* 5. Setup HW constants
************************/
if (iwl_set_hw_params(priv)) {
err = -ENOENT;
IWL_ERR(priv, "failed to set hw parameters\n");
goto out_free_eeprom;
}
/*******************
* 6. Setup priv
*******************/
err = iwl_init_drv(priv);
if (err)
goto out_free_eeprom;
/* At this point both hw and priv are initialized. */
/********************
* 7. Setup services
********************/
iwl_setup_deferred_work(priv);
iwl_setup_rx_handlers(priv);
iwlwifi: support the svtool messages interactions through nl80211 test mode This patch adds the feature to support the test mode operation through the generic netlink channel NL80211_CMD_TESTMODE between intel wireless device iwlwifi and the user space application svtool. The main purpose is to create a transportation layer between the iwlwifi device and the user space application so that the interaction between the user space application svtool and the iwlwifi device in the kernel space is in a way of generic netlink messaging. The detail specific functions are: 1. The function iwl_testmode_cmd() is added to digest the svtool test command from the user space application. The svtool test commands are categorized to three types : commands to be processed by the device ucode, commands to access the registers, and commands to be processed at the driver level(such as reload the ucode). iwl_testmode_cmd() dispatches the commands the corresponding handlers and reply to user space regarding the command execution status. Extra data is returned to the user space application if there's any. 2. The function iwl_testmode_ucode_rx_pkt() is added to multicast all the spontaneous messages from the iwlwifi device to the user space. Regardless the message types, whenever there is a valid spontaneous message received by the iwlwifi ISR, iwl_testmode_ucode_rx_pkt() is invoked to multicast the message content to user space. The message content is not attacked and the message parsing is left to the user space application. Implementation guidelines: 1. The generic netlink messaging for iwliwif test mode is through NL80211_CMD_TESTMODE channel, therefore, the codes need to follow the regulations set by cfg80211.ko to get the actual device instance ieee80211_ops via cfg80211.ko, so that the iwlwifi device is indicated with ieee80211_ops and can be actually accessed. Therefore, a callback iwl_testmode_cmd() is added to the structure iwlagn_hw_ops in iwl-agn.c. 2. It intends to utilize those low level device access APIs from iwlwifi device driver (ie. iwlagn.ko) rather than creating it's own set of device access functions. For example, iwl_send_cmd(), iwl_read32(), iwl_write8(), and iwl_write32() are reused. 3. The main functions are maintained in new files instead of spreading all over the existing iwlwifi driver files. The new files added are : drivers/net/wireless/iwlwifi/iwl-sv-open.c - to handle the user space test mode application command and reply the respective command status to the user space application. - to multicast the spontaneous messages from device to user space. drivers/net/wireless/iwlwifi/iwl-testmode.h - the commonly referenced definitions for the TLVs used in the generic netlink messages Signed-off-by: Cindy H. Kao <cindy.h.kao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2011-05-06 17:40:15 +00:00
iwl_testmode_init(priv);
/*********************************************
* 8. Enable interrupts
*********************************************/
iwl_enable_rfkill_int(priv);
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl_read32(bus(priv),
CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
clear_bit(STATUS_RF_KILL_HW, &priv->shrd->status);
else
set_bit(STATUS_RF_KILL_HW, &priv->shrd->status);
wiphy_rfkill_set_hw_state(priv->hw->wiphy,
test_bit(STATUS_RF_KILL_HW, &priv->shrd->status));
iwl_power_initialize(priv);
iwl_tt_initialize(priv);
init_completion(&priv->firmware_loading_complete);
err = iwl_request_firmware(priv, true);
if (err)
iwlwifi: move sysfs_create_group to post request firmware Move the sysfs_create_group to iwl_ucode_callback after we have safely got the firmware. The motivation to do this comes from a warning from lockdep which detected that we request priv->mutex while holding s_active during a sysfs request (show_statistics in the example copy pasted). The reverse order exists upon request_firmware: request_firmware which is a sysfs operation that requires s_active is run under priv->mutex. This ensures that we don't get sysfs request before we finish to request the firmware, avoiding this deadlock. ======================================================= [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- cat/2595 is trying to acquire lock: (&priv->mutex){+.+.+.}, at: [<facfa598>] show_statistics+0x48/0x100 [iwlagn] but task is already holding lock: (s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (s_active){++++.+}: [<c0489b74>] __lock_acquire+0xc44/0x1230 [<c048a1ed>] lock_acquire+0x8d/0x110 [<c0581499>] sysfs_addrm_finish+0xe9/0x180 [<c057f64a>] sysfs_hash_and_remove+0x4a/0x80 [<c05829d4>] sysfs_remove_group+0x44/0xd0 [<c0714b75>] dpm_sysfs_remove+0x15/0x20 [<c070dac8>] device_del+0x38/0x170 [<c070dc1e>] device_unregister+0x1e/0x60 [<c071838d>] _request_firmware+0x29d/0x550 [<c07186c7>] request_firmware+0x17/0x20 [<fad01bf1>] iwl_mac_start+0xb1/0x1230 [iwlagn] [<fa46ba06>] ieee80211_open+0x436/0x6f0 [mac80211] [<c0808cd2>] dev_open+0x92/0xf0 [<c0808b2b>] dev_change_flags+0x7b/0x190 [<c08148e8>] do_setlink+0x178/0x3b0 [<c0815169>] rtnl_setlink+0xf9/0x130 [<c081453b>] rtnetlink_rcv_msg+0x1bb/0x1f0 [<c0827ce6>] netlink_rcv_skb+0x86/0xa0 [<c081436c>] rtnetlink_rcv+0x1c/0x30 [<c08279c3>] netlink_unicast+0x263/0x290 [<c0828768>] netlink_sendmsg+0x1c8/0x2a0 [<c07f85fd>] sock_sendmsg+0xcd/0x100 [<c07f964d>] sys_sendmsg+0x15d/0x290 [<c07f9e6b>] sys_socketcall+0xeb/0x2a0 [<c040ad9f>] sysenter_do_call+0x12/0x38 -> #0 (&priv->mutex){+.+.+.}: [<c0489f84>] __lock_acquire+0x1054/0x1230 [<c048a1ed>] lock_acquire+0x8d/0x110 [<c08bb358>] __mutex_lock_common+0x58/0x470 [<c08bb84a>] mutex_lock_nested+0x3a/0x50 [<facfa598>] show_statistics+0x48/0x100 [iwlagn] [<c070d219>] dev_attr_show+0x29/0x50 [<c057fecd>] sysfs_read_file+0xdd/0x190 [<c052880f>] vfs_read+0x9f/0x190 [<c0528d22>] sys_read+0x42/0x70 [<c040ad9f>] sysenter_do_call+0x12/0x38 other info that might help us debug this: 3 locks held by cat/2595: #0: (&buffer->mutex){+.+.+.}, at: [<c057fe25>] sysfs_read_file+0x35/0x190 #1: (s_active){++++.+}, at: [<c0580ecd>] sysfs_get_active_two+0x2d/0x50 #2: (s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50 stack backtrace: Pid: 2595, comm: cat Not tainted 2.6.33-tp-rc4 #2 Call Trace: [<c08b99ab>] ? printk+0x1d/0x22 [<c0487752>] print_circular_bug+0xc2/0xd0 [<c0489f84>] __lock_acquire+0x1054/0x1230 [<c0478d81>] ? sched_clock_cpu+0x121/0x180 [<c048a1ed>] lock_acquire+0x8d/0x110 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<c08bb358>] __mutex_lock_common+0x58/0x470 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<c08bb84a>] mutex_lock_nested+0x3a/0x50 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<facfa598>] show_statistics+0x48/0x100 [iwlagn] [<c0580cf9>] ? sysfs_get_active+0x69/0xb0 [<facfa550>] ? show_statistics+0x0/0x100 [iwlagn] [<c070d219>] dev_attr_show+0x29/0x50 [<c057fecd>] sysfs_read_file+0xdd/0x190 [<c05ff314>] ? security_file_permission+0x14/0x20 [<c0528242>] ? rw_verify_area+0x62/0xd0 [<c052880f>] vfs_read+0x9f/0x190 [<c047745b>] ? up_read+0x1b/0x30 [<c057fdf0>] ? sysfs_read_file+0x0/0x190 [<c04af3b4>] ? audit_syscall_entry+0x1f4/0x220 [<c0528d22>] sys_read+0x42/0x70 [<c040ad9f>] sysenter_do_call+0x12/0x38 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-23 07:14:08 +00:00
goto out_destroy_workqueue;
return 0;
out_destroy_workqueue:
destroy_workqueue(priv->shrd->workqueue);
priv->shrd->workqueue = NULL;
iwl_uninit_drv(priv);
out_free_eeprom:
iwl_eeprom_free(priv);
out_free_trans:
iwl_trans_free(trans(priv));
out_free_traffic_mem:
iwl_free_traffic_mem(priv);
ieee80211_free_hw(priv->hw);
out:
return err;
}
void __devexit iwl_remove(struct iwl_priv * priv)
{
wait_for_completion(&priv->firmware_loading_complete);
IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
iwl_dbgfs_unregister(priv);
/* ieee80211_unregister_hw call wil cause iwl_mac_stop to
* to be called and iwl_down since we are removing the device
* we need to set STATUS_EXIT_PENDING bit.
*/
set_bit(STATUS_EXIT_PENDING, &priv->shrd->status);
iwl_testmode_cleanup(priv);
iwl_leds_exit(priv);
if (priv->mac80211_registered) {
ieee80211_unregister_hw(priv->hw);
priv->mac80211_registered = 0;
}
iwl_tt_exit(priv);
/*This will stop the queues, move the device to low power state */
iwl_trans_stop_device(trans(priv));
iwl_dealloc_ucode(priv);
iwl_eeprom_free(priv);
/*netif_stop_queue(dev); */
flush_workqueue(priv->shrd->workqueue);
/* ieee80211_unregister_hw calls iwl_mac_stop, which flushes
* priv->shrd->workqueue... so we can't take down the workqueue
* until now... */
destroy_workqueue(priv->shrd->workqueue);
priv->shrd->workqueue = NULL;
iwl_free_traffic_mem(priv);
iwl_trans_free(trans(priv));
bus_set_drv_data(priv->bus, NULL);
iwl_uninit_drv(priv);
dev_kfree_skb(priv->beacon_skb);
ieee80211_free_hw(priv->hw);
}
/*****************************************************************************
*
* driver and module entry point
*
*****************************************************************************/
static int __init iwl_init(void)
{
int ret;
pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
pr_info(DRV_COPYRIGHT "\n");
ret = iwlagn_rate_control_register();
if (ret) {
pr_err("Unable to register rate control algorithm: %d\n", ret);
return ret;
}
ret = iwl_pci_register_driver();
if (ret)
goto error_register;
return ret;
error_register:
iwlagn_rate_control_unregister();
return ret;
}
static void __exit iwl_exit(void)
{
iwl_pci_unregister_driver();
iwlagn_rate_control_unregister();
}
module_exit(iwl_exit);
module_init(iwl_init);
iwlwifi: make debug level more user friendly * Deprecate the "debug50" module parameter used to obtain 5000 series and up debugging. Replace it with "debug" module parameter to match with original driver and be consistent between them. The "debug50" module parameter can still be used, except that the module parameter is not writable in keeping with its previous state. We currently just mark it as "deprecated" and do not have it in the feature-removal-schedule. Some more cleanup of module parameters needs to be done and can then be entered together. * Only make "debug" module parameters visible if the driver is compiled with CONFIG_IWLWIFI_DEBUG. This will eliminate a lot of confusion where users think they have set debug flags but yet cannot see any debug output. * Make module parameters writable. This eliminates the need for the "debug_level" sysfs file, which can now also be deprecated and added to feature-removal-schedule. This file is in significant use though with many iwlwifi documents and text referring users to it. We can thus not take its removal lightly and keep it around. With iwlcore shared between iwlagn and iwl3945 we really do not need debug module parameters for each but can instead have one debug module parameter for the iwlcore module. The same issue is here as with the sysfs file - a lot of iwlwifi documentation and text (like bug reports) rely on iwlagn and iwl3945 having this module parameter, so changing this to a module parameter of iwlcore will have significant impact and we do not do this for that reason. One consequence of this patch is that if a user is running a system with both 3945 and later hardware then the setting of the one module parameter will affect the value of the other. The likelihood of this seems low - and even if this setup is present it does not seem like an issue for both modules to run with the same debug level. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-17 16:30:24 +00:00
#ifdef CONFIG_IWLWIFI_DEBUG
module_param_named(debug, iwlagn_mod_params.debug_level, uint,
S_IRUGO | S_IWUSR);
iwlwifi: make debug level more user friendly * Deprecate the "debug50" module parameter used to obtain 5000 series and up debugging. Replace it with "debug" module parameter to match with original driver and be consistent between them. The "debug50" module parameter can still be used, except that the module parameter is not writable in keeping with its previous state. We currently just mark it as "deprecated" and do not have it in the feature-removal-schedule. Some more cleanup of module parameters needs to be done and can then be entered together. * Only make "debug" module parameters visible if the driver is compiled with CONFIG_IWLWIFI_DEBUG. This will eliminate a lot of confusion where users think they have set debug flags but yet cannot see any debug output. * Make module parameters writable. This eliminates the need for the "debug_level" sysfs file, which can now also be deprecated and added to feature-removal-schedule. This file is in significant use though with many iwlwifi documents and text referring users to it. We can thus not take its removal lightly and keep it around. With iwlcore shared between iwlagn and iwl3945 we really do not need debug module parameters for each but can instead have one debug module parameter for the iwlcore module. The same issue is here as with the sysfs file - a lot of iwlwifi documentation and text (like bug reports) rely on iwlagn and iwl3945 having this module parameter, so changing this to a module parameter of iwlcore will have significant impact and we do not do this for that reason. One consequence of this patch is that if a user is running a system with both 3945 and later hardware then the setting of the one module parameter will affect the value of the other. The likelihood of this seems low - and even if this setup is present it does not seem like an issue for both modules to run with the same debug level. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-17 16:30:24 +00:00
MODULE_PARM_DESC(debug, "debug output mask");
#endif
module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
int, S_IRUGO);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
module_param_named(ucode_alternative,
iwlagn_mod_params.wanted_ucode_alternative,
int, S_IRUGO);
MODULE_PARM_DESC(ucode_alternative,
"specify ucode alternative to use from ucode file");
module_param_named(antenna_coupling, iwlagn_mod_params.ant_coupling,
int, S_IRUGO);
MODULE_PARM_DESC(antenna_coupling,
"specify antenna coupling in dB (defualt: 0 dB)");
module_param_named(bt_ch_inhibition, iwlagn_mod_params.bt_ch_announce,
bool, S_IRUGO);
MODULE_PARM_DESC(bt_ch_inhibition,
"Enable BT channel inhibition (default: enable)");
module_param_named(plcp_check, iwlagn_mod_params.plcp_check, bool, S_IRUGO);
MODULE_PARM_DESC(plcp_check, "Check plcp health (default: 1 [enabled])");
module_param_named(ack_check, iwlagn_mod_params.ack_check, bool, S_IRUGO);
MODULE_PARM_DESC(ack_check, "Check ack health (default: 0 [disabled])");
module_param_named(wd_disable, iwlagn_mod_params.wd_disable, bool, S_IRUGO);
MODULE_PARM_DESC(wd_disable,
"Disable stuck queue watchdog timer (default: 0 [enabled])");
/*
* set bt_coex_active to true, uCode will do kill/defer
* every time the priority line is asserted (BT is sending signals on the
* priority line in the PCIx).
* set bt_coex_active to false, uCode will ignore the BT activity and
* perform the normal operation
*
* User might experience transmit issue on some platform due to WiFi/BT
* co-exist problem. The possible behaviors are:
* Able to scan and finding all the available AP
* Not able to associate with any AP
* On those platforms, WiFi communication can be restored by set
* "bt_coex_active" module parameter to "false"
*
* default: bt_coex_active = true (BT_COEX_ENABLE)
*/
module_param_named(bt_coex_active, iwlagn_mod_params.bt_coex_active,
bool, S_IRUGO);
MODULE_PARM_DESC(bt_coex_active, "enable wifi/bt co-exist (default: enable)");
module_param_named(led_mode, iwlagn_mod_params.led_mode, int, S_IRUGO);
MODULE_PARM_DESC(led_mode, "0=system default, "
"1=On(RF On)/Off(RF Off), 2=blinking (default: 0)");
module_param_named(power_save, iwlagn_mod_params.power_save,
bool, S_IRUGO);
MODULE_PARM_DESC(power_save,
"enable WiFi power management (default: disable)");
module_param_named(power_level, iwlagn_mod_params.power_level,
int, S_IRUGO);
MODULE_PARM_DESC(power_level,
"default power save level (range from 1 - 5, default: 1)");
module_param_named(auto_agg, iwlagn_mod_params.auto_agg,
bool, S_IRUGO);
MODULE_PARM_DESC(auto_agg,
"enable agg w/o check traffic load (default: enable)");
/*
* For now, keep using power level 1 instead of automatically
* adjusting ...
*/
module_param_named(no_sleep_autoadjust, iwlagn_mod_params.no_sleep_autoadjust,
bool, S_IRUGO);
MODULE_PARM_DESC(no_sleep_autoadjust,
"don't automatically adjust sleep level "
"according to maximum network latency (default: true)");