linux/fs/io-wq.c

1095 lines
26 KiB
C
Raw Normal View History

2019-10-22 16:25:58 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* Basic worker thread pool for io_uring
*
* Copyright (C) 2019 Jens Axboe
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched/signal.h>
#include <linux/mm.h>
#include <linux/sched/mm.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/rculist_nulls.h>
#include <linux/cpu.h>
#include <linux/tracehook.h>
2019-10-22 16:25:58 +00:00
#include "../kernel/sched/sched.h"
2019-10-22 16:25:58 +00:00
#include "io-wq.h"
#define WORKER_IDLE_TIMEOUT (5 * HZ)
enum {
IO_WORKER_F_UP = 1, /* up and active */
IO_WORKER_F_RUNNING = 2, /* account as running */
IO_WORKER_F_FREE = 4, /* worker on free list */
IO_WORKER_F_FIXED = 8, /* static idle worker */
IO_WORKER_F_BOUND = 16, /* is doing bounded work */
2019-10-22 16:25:58 +00:00
};
enum {
IO_WQ_BIT_EXIT = 0, /* wq exiting */
};
enum {
IO_WQE_FLAG_STALLED = 1, /* stalled on hash */
};
/*
* One for each thread in a wqe pool
*/
struct io_worker {
refcount_t ref;
unsigned flags;
struct hlist_nulls_node nulls_node;
struct list_head all_list;
2019-10-22 16:25:58 +00:00
struct task_struct *task;
struct io_wqe *wqe;
2019-10-22 16:25:58 +00:00
struct io_wq_work *cur_work;
spinlock_t lock;
2019-10-22 16:25:58 +00:00
struct completion ref_done;
2019-10-22 16:25:58 +00:00
struct rcu_head rcu;
};
#if BITS_PER_LONG == 64
#define IO_WQ_HASH_ORDER 6
#else
#define IO_WQ_HASH_ORDER 5
#endif
#define IO_WQ_NR_HASH_BUCKETS (1u << IO_WQ_HASH_ORDER)
struct io_wqe_acct {
unsigned nr_workers;
unsigned max_workers;
int index;
atomic_t nr_running;
};
enum {
IO_WQ_ACCT_BOUND,
IO_WQ_ACCT_UNBOUND,
};
2019-10-22 16:25:58 +00:00
/*
* Per-node worker thread pool
*/
struct io_wqe {
struct {
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spinlock_t lock;
struct io_wq_work_list work_list;
2019-10-22 16:25:58 +00:00
unsigned flags;
} ____cacheline_aligned_in_smp;
int node;
struct io_wqe_acct acct[2];
2019-10-22 16:25:58 +00:00
struct hlist_nulls_head free_list;
struct list_head all_list;
2019-10-22 16:25:58 +00:00
struct wait_queue_entry wait;
2019-10-22 16:25:58 +00:00
struct io_wq *wq;
struct io_wq_work *hash_tail[IO_WQ_NR_HASH_BUCKETS];
2019-10-22 16:25:58 +00:00
};
/*
* Per io_wq state
*/
struct io_wq {
struct io_wqe **wqes;
unsigned long state;
free_work_fn *free_work;
io_wq_work_fn *do_work;
struct io_wq_hash *hash;
2019-10-22 16:25:58 +00:00
refcount_t refs;
atomic_t worker_refs;
struct completion worker_done;
struct hlist_node cpuhp_node;
struct task_struct *task;
2019-10-22 16:25:58 +00:00
};
static enum cpuhp_state io_wq_online;
struct io_cb_cancel_data {
work_cancel_fn *fn;
void *data;
int nr_running;
int nr_pending;
bool cancel_all;
};
static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index);
2019-10-22 16:25:58 +00:00
static bool io_worker_get(struct io_worker *worker)
{
return refcount_inc_not_zero(&worker->ref);
}
static void io_worker_release(struct io_worker *worker)
{
if (refcount_dec_and_test(&worker->ref))
complete(&worker->ref_done);
2019-10-22 16:25:58 +00:00
}
static inline struct io_wqe_acct *io_get_acct(struct io_wqe *wqe, bool bound)
{
return &wqe->acct[bound ? IO_WQ_ACCT_BOUND : IO_WQ_ACCT_UNBOUND];
}
static inline struct io_wqe_acct *io_work_get_acct(struct io_wqe *wqe,
struct io_wq_work *work)
{
return io_get_acct(wqe, !(work->flags & IO_WQ_WORK_UNBOUND));
}
static inline struct io_wqe_acct *io_wqe_get_acct(struct io_worker *worker)
{
return io_get_acct(worker->wqe, worker->flags & IO_WORKER_F_BOUND);
}
static void io_worker_ref_put(struct io_wq *wq)
{
if (atomic_dec_and_test(&wq->worker_refs))
complete(&wq->worker_done);
}
2019-10-22 16:25:58 +00:00
static void io_worker_exit(struct io_worker *worker)
{
struct io_wqe *wqe = worker->wqe;
struct io_wqe_acct *acct = io_wqe_get_acct(worker);
unsigned flags;
2019-10-22 16:25:58 +00:00
if (refcount_dec_and_test(&worker->ref))
complete(&worker->ref_done);
wait_for_completion(&worker->ref_done);
2019-10-22 16:25:58 +00:00
preempt_disable();
current->flags &= ~PF_IO_WORKER;
flags = worker->flags;
worker->flags = 0;
if (flags & IO_WORKER_F_RUNNING)
atomic_dec(&acct->nr_running);
2019-10-22 16:25:58 +00:00
worker->flags = 0;
preempt_enable();
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_irq(&wqe->lock);
if (flags & IO_WORKER_F_FREE)
hlist_nulls_del_rcu(&worker->nulls_node);
list_del_rcu(&worker->all_list);
acct->nr_workers--;
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irq(&wqe->lock);
2019-10-22 16:25:58 +00:00
kfree_rcu(worker, rcu);
io_worker_ref_put(wqe->wq);
do_exit(0);
2019-10-22 16:25:58 +00:00
}
static inline bool io_wqe_run_queue(struct io_wqe *wqe)
__must_hold(wqe->lock)
{
if (!wq_list_empty(&wqe->work_list) &&
!(wqe->flags & IO_WQE_FLAG_STALLED))
return true;
return false;
}
/*
* Check head of free list for an available worker. If one isn't available,
* caller must create one.
*/
static bool io_wqe_activate_free_worker(struct io_wqe *wqe)
__must_hold(RCU)
{
struct hlist_nulls_node *n;
struct io_worker *worker;
n = rcu_dereference(hlist_nulls_first_rcu(&wqe->free_list));
if (is_a_nulls(n))
return false;
worker = hlist_nulls_entry(n, struct io_worker, nulls_node);
if (io_worker_get(worker)) {
wake_up_process(worker->task);
io_worker_release(worker);
return true;
}
return false;
}
/*
* We need a worker. If we find a free one, we're good. If not, and we're
* below the max number of workers, create one.
*/
static void io_wqe_wake_worker(struct io_wqe *wqe, struct io_wqe_acct *acct)
{
bool ret;
/*
* Most likely an attempt to queue unbounded work on an io_wq that
* wasn't setup with any unbounded workers.
*/
WARN_ON_ONCE(!acct->max_workers);
rcu_read_lock();
ret = io_wqe_activate_free_worker(wqe);
rcu_read_unlock();
if (!ret && acct->nr_workers < acct->max_workers) {
atomic_inc(&acct->nr_running);
atomic_inc(&wqe->wq->worker_refs);
create_io_worker(wqe->wq, wqe, acct->index);
}
}
static void io_wqe_inc_running(struct io_worker *worker)
{
struct io_wqe_acct *acct = io_wqe_get_acct(worker);
atomic_inc(&acct->nr_running);
}
struct create_worker_data {
struct callback_head work;
struct io_wqe *wqe;
int index;
};
static void create_worker_cb(struct callback_head *cb)
{
struct create_worker_data *cwd;
struct io_wq *wq;
cwd = container_of(cb, struct create_worker_data, work);
wq = cwd->wqe->wq;
create_io_worker(wq, cwd->wqe, cwd->index);
kfree(cwd);
}
static void io_queue_worker_create(struct io_wqe *wqe, struct io_wqe_acct *acct)
{
struct create_worker_data *cwd;
struct io_wq *wq = wqe->wq;
/* raced with exit, just ignore create call */
if (test_bit(IO_WQ_BIT_EXIT, &wq->state))
goto fail;
cwd = kmalloc(sizeof(*cwd), GFP_ATOMIC);
if (cwd) {
init_task_work(&cwd->work, create_worker_cb);
cwd->wqe = wqe;
cwd->index = acct->index;
if (!task_work_add(wq->task, &cwd->work, TWA_SIGNAL))
return;
kfree(cwd);
}
fail:
atomic_dec(&acct->nr_running);
io_worker_ref_put(wq);
}
static void io_wqe_dec_running(struct io_worker *worker)
__must_hold(wqe->lock)
{
struct io_wqe_acct *acct = io_wqe_get_acct(worker);
struct io_wqe *wqe = worker->wqe;
if (!(worker->flags & IO_WORKER_F_UP))
return;
if (atomic_dec_and_test(&acct->nr_running) && io_wqe_run_queue(wqe)) {
atomic_inc(&acct->nr_running);
atomic_inc(&wqe->wq->worker_refs);
io_queue_worker_create(wqe, acct);
}
}
2019-10-22 16:25:58 +00:00
/*
* Worker will start processing some work. Move it to the busy list, if
* it's currently on the freelist
*/
static void __io_worker_busy(struct io_wqe *wqe, struct io_worker *worker,
struct io_wq_work *work)
__must_hold(wqe->lock)
{
bool worker_bound, work_bound;
2019-10-22 16:25:58 +00:00
if (worker->flags & IO_WORKER_F_FREE) {
worker->flags &= ~IO_WORKER_F_FREE;
hlist_nulls_del_init_rcu(&worker->nulls_node);
}
/*
* If worker is moving from bound to unbound (or vice versa), then
* ensure we update the running accounting.
*/
worker_bound = (worker->flags & IO_WORKER_F_BOUND) != 0;
work_bound = (work->flags & IO_WQ_WORK_UNBOUND) == 0;
if (worker_bound != work_bound) {
io_wqe_dec_running(worker);
if (work_bound) {
worker->flags |= IO_WORKER_F_BOUND;
wqe->acct[IO_WQ_ACCT_UNBOUND].nr_workers--;
wqe->acct[IO_WQ_ACCT_BOUND].nr_workers++;
} else {
worker->flags &= ~IO_WORKER_F_BOUND;
wqe->acct[IO_WQ_ACCT_UNBOUND].nr_workers++;
wqe->acct[IO_WQ_ACCT_BOUND].nr_workers--;
}
io_wqe_inc_running(worker);
}
2019-10-22 16:25:58 +00:00
}
/*
* No work, worker going to sleep. Move to freelist, and unuse mm if we
* have one attached. Dropping the mm may potentially sleep, so we drop
* the lock in that case and return success. Since the caller has to
* retry the loop in that case (we changed task state), we don't regrab
* the lock if we return success.
*/
static void __io_worker_idle(struct io_wqe *wqe, struct io_worker *worker)
2019-10-22 16:25:58 +00:00
__must_hold(wqe->lock)
{
if (!(worker->flags & IO_WORKER_F_FREE)) {
worker->flags |= IO_WORKER_F_FREE;
hlist_nulls_add_head_rcu(&worker->nulls_node, &wqe->free_list);
2019-10-22 16:25:58 +00:00
}
}
static inline unsigned int io_get_work_hash(struct io_wq_work *work)
{
return work->flags >> IO_WQ_HASH_SHIFT;
}
static void io_wait_on_hash(struct io_wqe *wqe, unsigned int hash)
{
struct io_wq *wq = wqe->wq;
spin_lock(&wq->hash->wait.lock);
if (list_empty(&wqe->wait.entry)) {
__add_wait_queue(&wq->hash->wait, &wqe->wait);
if (!test_bit(hash, &wq->hash->map)) {
__set_current_state(TASK_RUNNING);
list_del_init(&wqe->wait.entry);
}
}
spin_unlock(&wq->hash->wait.lock);
}
static struct io_wq_work *io_get_next_work(struct io_wqe *wqe)
2019-10-22 16:25:58 +00:00
__must_hold(wqe->lock)
{
struct io_wq_work_node *node, *prev;
struct io_wq_work *work, *tail;
unsigned int stall_hash = -1U;
2019-10-22 16:25:58 +00:00
wq_list_for_each(node, prev, &wqe->work_list) {
unsigned int hash;
work = container_of(node, struct io_wq_work, list);
2019-10-22 16:25:58 +00:00
/* not hashed, can run anytime */
if (!io_wq_is_hashed(work)) {
wq_list_del(&wqe->work_list, node, prev);
2019-10-22 16:25:58 +00:00
return work;
}
hash = io_get_work_hash(work);
/* all items with this hash lie in [work, tail] */
tail = wqe->hash_tail[hash];
/* hashed, can run if not already running */
if (!test_and_set_bit(hash, &wqe->wq->hash->map)) {
wqe->hash_tail[hash] = NULL;
wq_list_cut(&wqe->work_list, &tail->list, prev);
2019-10-22 16:25:58 +00:00
return work;
}
if (stall_hash == -1U)
stall_hash = hash;
/* fast forward to a next hash, for-each will fix up @prev */
node = &tail->list;
}
if (stall_hash != -1U) {
raw_spin_unlock(&wqe->lock);
io_wait_on_hash(wqe, stall_hash);
raw_spin_lock(&wqe->lock);
2019-10-22 16:25:58 +00:00
}
return NULL;
}
static bool io_flush_signals(void)
{
if (unlikely(test_thread_flag(TIF_NOTIFY_SIGNAL))) {
__set_current_state(TASK_RUNNING);
tracehook_notify_signal();
return true;
}
return false;
}
static void io_assign_current_work(struct io_worker *worker,
struct io_wq_work *work)
{
if (work) {
io_flush_signals();
cond_resched();
}
spin_lock_irq(&worker->lock);
worker->cur_work = work;
spin_unlock_irq(&worker->lock);
}
static void io_wqe_enqueue(struct io_wqe *wqe, struct io_wq_work *work);
2019-10-22 16:25:58 +00:00
static void io_worker_handle_work(struct io_worker *worker)
__releases(wqe->lock)
{
struct io_wqe *wqe = worker->wqe;
struct io_wq *wq = wqe->wq;
bool do_kill = test_bit(IO_WQ_BIT_EXIT, &wq->state);
2019-10-22 16:25:58 +00:00
do {
struct io_wq_work *work;
get_next:
2019-10-22 16:25:58 +00:00
/*
* If we got some work, mark us as busy. If we didn't, but
* the list isn't empty, it means we stalled on hashed work.
* Mark us stalled so we don't keep looking for work when we
* can't make progress, any work completion or insertion will
* clear the stalled flag.
*/
work = io_get_next_work(wqe);
2019-10-22 16:25:58 +00:00
if (work)
__io_worker_busy(wqe, worker, work);
else if (!wq_list_empty(&wqe->work_list))
2019-10-22 16:25:58 +00:00
wqe->flags |= IO_WQE_FLAG_STALLED;
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irq(&wqe->lock);
2019-10-22 16:25:58 +00:00
if (!work)
break;
io_assign_current_work(worker, work);
__set_current_state(TASK_RUNNING);
/* handle a whole dependent link */
do {
struct io_wq_work *next_hashed, *linked;
unsigned int hash = io_get_work_hash(work);
next_hashed = wq_next_work(work);
if (unlikely(do_kill) && (work->flags & IO_WQ_WORK_UNBOUND))
work->flags |= IO_WQ_WORK_CANCEL;
wq->do_work(work);
io_assign_current_work(worker, NULL);
linked = wq->free_work(work);
work = next_hashed;
if (!work && linked && !io_wq_is_hashed(linked)) {
work = linked;
linked = NULL;
}
io_assign_current_work(worker, work);
if (linked)
io_wqe_enqueue(wqe, linked);
if (hash != -1U && !next_hashed) {
clear_bit(hash, &wq->hash->map);
if (wq_has_sleeper(&wq->hash->wait))
wake_up(&wq->hash->wait);
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_irq(&wqe->lock);
wqe->flags &= ~IO_WQE_FLAG_STALLED;
/* skip unnecessary unlock-lock wqe->lock */
if (!work)
goto get_next;
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irq(&wqe->lock);
}
} while (work);
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_irq(&wqe->lock);
2019-10-22 16:25:58 +00:00
} while (1);
}
static int io_wqe_worker(void *data)
{
struct io_worker *worker = data;
struct io_wqe *wqe = worker->wqe;
struct io_wq *wq = wqe->wq;
char buf[TASK_COMM_LEN];
2019-10-22 16:25:58 +00:00
worker->flags |= (IO_WORKER_F_UP | IO_WORKER_F_RUNNING);
snprintf(buf, sizeof(buf), "iou-wrk-%d", wq->task->pid);
set_task_comm(current, buf);
2019-10-22 16:25:58 +00:00
while (!test_bit(IO_WQ_BIT_EXIT, &wq->state)) {
long ret;
set_current_state(TASK_INTERRUPTIBLE);
loop:
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_irq(&wqe->lock);
2019-10-22 16:25:58 +00:00
if (io_wqe_run_queue(wqe)) {
io_worker_handle_work(worker);
goto loop;
2019-10-22 16:25:58 +00:00
}
__io_worker_idle(wqe, worker);
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irq(&wqe->lock);
if (io_flush_signals())
continue;
ret = schedule_timeout(WORKER_IDLE_TIMEOUT);
if (signal_pending(current)) {
struct ksignal ksig;
if (!get_signal(&ksig))
continue;
break;
}
if (ret)
continue;
2019-10-22 16:25:58 +00:00
/* timed out, exit unless we're the fixed worker */
if (test_bit(IO_WQ_BIT_EXIT, &wq->state) ||
!(worker->flags & IO_WORKER_F_FIXED))
break;
}
if (test_bit(IO_WQ_BIT_EXIT, &wq->state)) {
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_irq(&wqe->lock);
if (!wq_list_empty(&wqe->work_list))
2019-10-22 16:25:58 +00:00
io_worker_handle_work(worker);
else
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irq(&wqe->lock);
2019-10-22 16:25:58 +00:00
}
io_worker_exit(worker);
return 0;
}
/*
* Called when a worker is scheduled in. Mark us as currently running.
*/
void io_wq_worker_running(struct task_struct *tsk)
{
struct io_worker *worker = tsk->pf_io_worker;
2019-10-22 16:25:58 +00:00
if (!worker)
return;
2019-10-22 16:25:58 +00:00
if (!(worker->flags & IO_WORKER_F_UP))
return;
if (worker->flags & IO_WORKER_F_RUNNING)
return;
worker->flags |= IO_WORKER_F_RUNNING;
io_wqe_inc_running(worker);
2019-10-22 16:25:58 +00:00
}
/*
* Called when worker is going to sleep. If there are no workers currently
* running and we have work pending, wake up a free one or create a new one.
2019-10-22 16:25:58 +00:00
*/
void io_wq_worker_sleeping(struct task_struct *tsk)
{
struct io_worker *worker = tsk->pf_io_worker;
2019-10-22 16:25:58 +00:00
if (!worker)
return;
2019-10-22 16:25:58 +00:00
if (!(worker->flags & IO_WORKER_F_UP))
return;
if (!(worker->flags & IO_WORKER_F_RUNNING))
return;
worker->flags &= ~IO_WORKER_F_RUNNING;
raw_spin_lock_irq(&worker->wqe->lock);
io_wqe_dec_running(worker);
raw_spin_unlock_irq(&worker->wqe->lock);
2019-10-22 16:25:58 +00:00
}
static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index)
{
struct io_wqe_acct *acct = &wqe->acct[index];
struct io_worker *worker;
struct task_struct *tsk;
__set_current_state(TASK_RUNNING);
worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, wqe->node);
if (!worker)
goto fail;
refcount_set(&worker->ref, 1);
worker->nulls_node.pprev = NULL;
worker->wqe = wqe;
spin_lock_init(&worker->lock);
init_completion(&worker->ref_done);
tsk = create_io_thread(io_wqe_worker, worker, wqe->node);
if (IS_ERR(tsk)) {
kfree(worker);
fail:
atomic_dec(&acct->nr_running);
io_worker_ref_put(wq);
return;
}
tsk->pf_io_worker = worker;
worker->task = tsk;
set_cpus_allowed_ptr(tsk, cpumask_of_node(wqe->node));
tsk->flags |= PF_NO_SETAFFINITY;
raw_spin_lock_irq(&wqe->lock);
hlist_nulls_add_head_rcu(&worker->nulls_node, &wqe->free_list);
list_add_tail_rcu(&worker->all_list, &wqe->all_list);
worker->flags |= IO_WORKER_F_FREE;
if (index == IO_WQ_ACCT_BOUND)
worker->flags |= IO_WORKER_F_BOUND;
if (!acct->nr_workers && (worker->flags & IO_WORKER_F_BOUND))
worker->flags |= IO_WORKER_F_FIXED;
acct->nr_workers++;
raw_spin_unlock_irq(&wqe->lock);
wake_up_new_task(tsk);
2019-10-22 16:25:58 +00:00
}
static inline bool io_wqe_need_worker(struct io_wqe *wqe, int index)
2019-10-22 16:25:58 +00:00
__must_hold(wqe->lock)
{
struct io_wqe_acct *acct = &wqe->acct[index];
2019-10-22 16:25:58 +00:00
if (acct->nr_workers && test_bit(IO_WQ_BIT_EXIT, &wqe->wq->state))
return false;
/* if we have available workers or no work, no need */
if (!hlist_nulls_empty(&wqe->free_list) || !io_wqe_run_queue(wqe))
return false;
return acct->nr_workers < acct->max_workers;
2019-10-22 16:25:58 +00:00
}
io-wq: fix use-after-free in io_wq_worker_running The smart syzbot has found a reproducer for the following issue: ================================================================== BUG: KASAN: use-after-free in instrument_atomic_write include/linux/instrumented.h:71 [inline] BUG: KASAN: use-after-free in atomic_inc include/asm-generic/atomic-instrumented.h:240 [inline] BUG: KASAN: use-after-free in io_wqe_inc_running fs/io-wq.c:301 [inline] BUG: KASAN: use-after-free in io_wq_worker_running+0xde/0x110 fs/io-wq.c:613 Write of size 4 at addr ffff8882183db08c by task io_wqe_worker-0/7771 CPU: 0 PID: 7771 Comm: io_wqe_worker-0 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:192 instrument_atomic_write include/linux/instrumented.h:71 [inline] atomic_inc include/asm-generic/atomic-instrumented.h:240 [inline] io_wqe_inc_running fs/io-wq.c:301 [inline] io_wq_worker_running+0xde/0x110 fs/io-wq.c:613 schedule_timeout+0x148/0x250 kernel/time/timer.c:1879 io_wqe_worker+0x517/0x10e0 fs/io-wq.c:580 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Allocated by task 7768: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_node_trace+0x17b/0x3f0 mm/slab.c:3594 kmalloc_node include/linux/slab.h:572 [inline] kzalloc_node include/linux/slab.h:677 [inline] io_wq_create+0x57b/0xa10 fs/io-wq.c:1064 io_init_wq_offload fs/io_uring.c:7432 [inline] io_sq_offload_start fs/io_uring.c:7504 [inline] io_uring_create fs/io_uring.c:8625 [inline] io_uring_setup+0x1836/0x28e0 fs/io_uring.c:8694 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 21: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kfree+0x10e/0x2b0 mm/slab.c:3756 __io_wq_destroy fs/io-wq.c:1138 [inline] io_wq_destroy+0x2af/0x460 fs/io-wq.c:1146 io_finish_async fs/io_uring.c:6836 [inline] io_ring_ctx_free fs/io_uring.c:7870 [inline] io_ring_exit_work+0x1e4/0x6d0 fs/io_uring.c:7954 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 The buggy address belongs to the object at ffff8882183db000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 140 bytes inside of 1024-byte region [ffff8882183db000, ffff8882183db400) The buggy address belongs to the page: page:000000009bada22b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2183db flags: 0x57ffe0000000200(slab) raw: 057ffe0000000200 ffffea0008604c48 ffffea00086a8648 ffff8880aa040700 raw: 0000000000000000 ffff8882183db000 0000000100000002 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8882183daf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8882183db000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8882183db080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8882183db100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8882183db180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== which is down to the comment below, /* all workers gone, wq exit can proceed */ if (!nr_workers && refcount_dec_and_test(&wqe->wq->refs)) complete(&wqe->wq->done); because there might be multiple cases of wqe in a wq and we would wait for every worker in every wqe to go home before releasing wq's resources on destroying. To that end, rework wq's refcount by making it independent of the tracking of workers because after all they are two different things, and keeping it balanced when workers come and go. Note the manager kthread, like other workers, now holds a grab to wq during its lifetime. Finally to help destroy wq, check IO_WQ_BIT_EXIT upon creating worker and do nothing for exiting wq. Cc: stable@vger.kernel.org # v5.5+ Reported-by: syzbot+45fa0a195b941764e0f0@syzkaller.appspotmail.com Reported-by: syzbot+9af99580130003da82b1@syzkaller.appspotmail.com Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-26 13:26:55 +00:00
/*
* Iterate the passed in list and call the specific function for each
* worker that isn't exiting
*/
static bool io_wq_for_each_worker(struct io_wqe *wqe,
bool (*func)(struct io_worker *, void *),
void *data)
{
struct io_worker *worker;
bool ret = false;
list_for_each_entry_rcu(worker, &wqe->all_list, all_list) {
if (io_worker_get(worker)) {
/* no task if node is/was offline */
if (worker->task)
ret = func(worker, data);
io_worker_release(worker);
if (ret)
break;
}
}
return ret;
}
static bool io_wq_worker_wake(struct io_worker *worker, void *data)
{
set_notify_signal(worker->task);
io-wq: fix use-after-free in io_wq_worker_running The smart syzbot has found a reproducer for the following issue: ================================================================== BUG: KASAN: use-after-free in instrument_atomic_write include/linux/instrumented.h:71 [inline] BUG: KASAN: use-after-free in atomic_inc include/asm-generic/atomic-instrumented.h:240 [inline] BUG: KASAN: use-after-free in io_wqe_inc_running fs/io-wq.c:301 [inline] BUG: KASAN: use-after-free in io_wq_worker_running+0xde/0x110 fs/io-wq.c:613 Write of size 4 at addr ffff8882183db08c by task io_wqe_worker-0/7771 CPU: 0 PID: 7771 Comm: io_wqe_worker-0 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:192 instrument_atomic_write include/linux/instrumented.h:71 [inline] atomic_inc include/asm-generic/atomic-instrumented.h:240 [inline] io_wqe_inc_running fs/io-wq.c:301 [inline] io_wq_worker_running+0xde/0x110 fs/io-wq.c:613 schedule_timeout+0x148/0x250 kernel/time/timer.c:1879 io_wqe_worker+0x517/0x10e0 fs/io-wq.c:580 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Allocated by task 7768: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_node_trace+0x17b/0x3f0 mm/slab.c:3594 kmalloc_node include/linux/slab.h:572 [inline] kzalloc_node include/linux/slab.h:677 [inline] io_wq_create+0x57b/0xa10 fs/io-wq.c:1064 io_init_wq_offload fs/io_uring.c:7432 [inline] io_sq_offload_start fs/io_uring.c:7504 [inline] io_uring_create fs/io_uring.c:8625 [inline] io_uring_setup+0x1836/0x28e0 fs/io_uring.c:8694 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 21: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3418 [inline] kfree+0x10e/0x2b0 mm/slab.c:3756 __io_wq_destroy fs/io-wq.c:1138 [inline] io_wq_destroy+0x2af/0x460 fs/io-wq.c:1146 io_finish_async fs/io_uring.c:6836 [inline] io_ring_ctx_free fs/io_uring.c:7870 [inline] io_ring_exit_work+0x1e4/0x6d0 fs/io_uring.c:7954 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 The buggy address belongs to the object at ffff8882183db000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 140 bytes inside of 1024-byte region [ffff8882183db000, ffff8882183db400) The buggy address belongs to the page: page:000000009bada22b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2183db flags: 0x57ffe0000000200(slab) raw: 057ffe0000000200 ffffea0008604c48 ffffea00086a8648 ffff8880aa040700 raw: 0000000000000000 ffff8882183db000 0000000100000002 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8882183daf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8882183db000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8882183db080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8882183db100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8882183db180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== which is down to the comment below, /* all workers gone, wq exit can proceed */ if (!nr_workers && refcount_dec_and_test(&wqe->wq->refs)) complete(&wqe->wq->done); because there might be multiple cases of wqe in a wq and we would wait for every worker in every wqe to go home before releasing wq's resources on destroying. To that end, rework wq's refcount by making it independent of the tracking of workers because after all they are two different things, and keeping it balanced when workers come and go. Note the manager kthread, like other workers, now holds a grab to wq during its lifetime. Finally to help destroy wq, check IO_WQ_BIT_EXIT upon creating worker and do nothing for exiting wq. Cc: stable@vger.kernel.org # v5.5+ Reported-by: syzbot+45fa0a195b941764e0f0@syzkaller.appspotmail.com Reported-by: syzbot+9af99580130003da82b1@syzkaller.appspotmail.com Cc: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-26 13:26:55 +00:00
wake_up_process(worker->task);
return false;
}
static bool io_wq_work_match_all(struct io_wq_work *work, void *data)
{
return true;
}
static void io_run_cancel(struct io_wq_work *work, struct io_wqe *wqe)
{
struct io_wq *wq = wqe->wq;
do {
work->flags |= IO_WQ_WORK_CANCEL;
wq->do_work(work);
work = wq->free_work(work);
} while (work);
}
static void io_wqe_insert_work(struct io_wqe *wqe, struct io_wq_work *work)
{
unsigned int hash;
struct io_wq_work *tail;
if (!io_wq_is_hashed(work)) {
append:
wq_list_add_tail(&work->list, &wqe->work_list);
return;
}
hash = io_get_work_hash(work);
tail = wqe->hash_tail[hash];
wqe->hash_tail[hash] = work;
if (!tail)
goto append;
wq_list_add_after(&work->list, &tail->list, &wqe->work_list);
}
2019-10-22 16:25:58 +00:00
static void io_wqe_enqueue(struct io_wqe *wqe, struct io_wq_work *work)
{
struct io_wqe_acct *acct = io_work_get_acct(wqe, work);
int work_flags;
2019-10-22 16:25:58 +00:00
unsigned long flags;
if (test_bit(IO_WQ_BIT_EXIT, &wqe->wq->state)) {
io_run_cancel(work, wqe);
return;
}
work_flags = work->flags;
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_irqsave(&wqe->lock, flags);
io_wqe_insert_work(wqe, work);
2019-10-22 16:25:58 +00:00
wqe->flags &= ~IO_WQE_FLAG_STALLED;
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irqrestore(&wqe->lock, flags);
2019-10-22 16:25:58 +00:00
if ((work_flags & IO_WQ_WORK_CONCURRENT) ||
!atomic_read(&acct->nr_running))
io_wqe_wake_worker(wqe, acct);
2019-10-22 16:25:58 +00:00
}
void io_wq_enqueue(struct io_wq *wq, struct io_wq_work *work)
{
struct io_wqe *wqe = wq->wqes[numa_node_id()];
io_wqe_enqueue(wqe, work);
}
/*
* Work items that hash to the same value will not be done in parallel.
* Used to limit concurrent writes, generally hashed by inode.
2019-10-22 16:25:58 +00:00
*/
void io_wq_hash_work(struct io_wq_work *work, void *val)
2019-10-22 16:25:58 +00:00
{
unsigned int bit;
2019-10-22 16:25:58 +00:00
bit = hash_ptr(val, IO_WQ_HASH_ORDER);
work->flags |= (IO_WQ_WORK_HASHED | (bit << IO_WQ_HASH_SHIFT));
}
static bool io_wq_worker_cancel(struct io_worker *worker, void *data)
{
struct io_cb_cancel_data *match = data;
unsigned long flags;
/*
* Hold the lock to avoid ->cur_work going out of scope, caller
* may dereference the passed in work.
*/
spin_lock_irqsave(&worker->lock, flags);
if (worker->cur_work &&
match->fn(worker->cur_work, match->data)) {
set_notify_signal(worker->task);
match->nr_running++;
2019-10-22 16:25:58 +00:00
}
spin_unlock_irqrestore(&worker->lock, flags);
2019-10-22 16:25:58 +00:00
return match->nr_running && !match->cancel_all;
2019-10-22 16:25:58 +00:00
}
static inline void io_wqe_remove_pending(struct io_wqe *wqe,
struct io_wq_work *work,
struct io_wq_work_node *prev)
{
unsigned int hash = io_get_work_hash(work);
struct io_wq_work *prev_work = NULL;
if (io_wq_is_hashed(work) && work == wqe->hash_tail[hash]) {
if (prev)
prev_work = container_of(prev, struct io_wq_work, list);
if (prev_work && io_get_work_hash(prev_work) == hash)
wqe->hash_tail[hash] = prev_work;
else
wqe->hash_tail[hash] = NULL;
}
wq_list_del(&wqe->work_list, &work->list, prev);
}
static void io_wqe_cancel_pending_work(struct io_wqe *wqe,
struct io_cb_cancel_data *match)
2019-10-22 16:25:58 +00:00
{
struct io_wq_work_node *node, *prev;
2019-10-22 16:25:58 +00:00
struct io_wq_work *work;
unsigned long flags;
2019-10-22 16:25:58 +00:00
retry:
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_irqsave(&wqe->lock, flags);
wq_list_for_each(node, prev, &wqe->work_list) {
work = container_of(node, struct io_wq_work, list);
if (!match->fn(work, match->data))
continue;
io_wqe_remove_pending(wqe, work, prev);
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irqrestore(&wqe->lock, flags);
io_run_cancel(work, wqe);
match->nr_pending++;
if (!match->cancel_all)
return;
/* not safe to continue after unlock */
goto retry;
2019-10-22 16:25:58 +00:00
}
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_unlock_irqrestore(&wqe->lock, flags);
}
static void io_wqe_cancel_running_work(struct io_wqe *wqe,
struct io_cb_cancel_data *match)
{
2019-10-22 16:25:58 +00:00
rcu_read_lock();
io_wq_for_each_worker(wqe, io_wq_worker_cancel, match);
2019-10-22 16:25:58 +00:00
rcu_read_unlock();
}
enum io_wq_cancel io_wq_cancel_cb(struct io_wq *wq, work_cancel_fn *cancel,
void *data, bool cancel_all)
2019-10-22 16:25:58 +00:00
{
struct io_cb_cancel_data match = {
.fn = cancel,
.data = data,
.cancel_all = cancel_all,
};
int node;
2019-10-22 16:25:58 +00:00
/*
* First check pending list, if we're lucky we can just remove it
* from there. CANCEL_OK means that the work is returned as-new,
* no completion will be posted for it.
*/
for_each_node(node) {
struct io_wqe *wqe = wq->wqes[node];
2019-10-22 16:25:58 +00:00
io_wqe_cancel_pending_work(wqe, &match);
if (match.nr_pending && !match.cancel_all)
return IO_WQ_CANCEL_OK;
2019-10-22 16:25:58 +00:00
}
/*
* Now check if a free (going busy) or busy worker has the work
* currently running. If we find it there, we'll return CANCEL_RUNNING
* as an indication that we attempt to signal cancellation. The
* completion will run normally in this case.
*/
for_each_node(node) {
struct io_wqe *wqe = wq->wqes[node];
io_wqe_cancel_running_work(wqe, &match);
if (match.nr_running && !match.cancel_all)
return IO_WQ_CANCEL_RUNNING;
}
if (match.nr_running)
return IO_WQ_CANCEL_RUNNING;
if (match.nr_pending)
return IO_WQ_CANCEL_OK;
return IO_WQ_CANCEL_NOTFOUND;
2019-10-22 16:25:58 +00:00
}
static int io_wqe_hash_wake(struct wait_queue_entry *wait, unsigned mode,
int sync, void *key)
{
struct io_wqe *wqe = container_of(wait, struct io_wqe, wait);
list_del_init(&wait->entry);
rcu_read_lock();
io_wqe_activate_free_worker(wqe);
rcu_read_unlock();
return 1;
}
struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
2019-10-22 16:25:58 +00:00
{
int ret = -ENOMEM, node;
2019-10-22 16:25:58 +00:00
struct io_wq *wq;
if (WARN_ON_ONCE(!data->free_work || !data->do_work))
return ERR_PTR(-EINVAL);
wq = kzalloc(sizeof(*wq), GFP_KERNEL);
2019-10-22 16:25:58 +00:00
if (!wq)
return ERR_PTR(-ENOMEM);
wq->wqes = kcalloc(nr_node_ids, sizeof(struct io_wqe *), GFP_KERNEL);
if (!wq->wqes)
goto err_wq;
ret = cpuhp_state_add_instance_nocalls(io_wq_online, &wq->cpuhp_node);
if (ret)
goto err_wqes;
2019-10-22 16:25:58 +00:00
refcount_inc(&data->hash->refs);
wq->hash = data->hash;
wq->free_work = data->free_work;
wq->do_work = data->do_work;
ret = -ENOMEM;
for_each_node(node) {
2019-10-22 16:25:58 +00:00
struct io_wqe *wqe;
io-wq: don't call kXalloc_node() with non-online node Glauber reports a crash on init on a box he has: RIP: 0010:__alloc_pages_nodemask+0x132/0x340 Code: 18 01 75 04 41 80 ce 80 89 e8 48 8b 54 24 08 8b 74 24 1c c1 e8 0c 48 8b 3c 24 83 e0 01 88 44 24 20 48 85 d2 0f 85 74 01 00 00 <3b> 77 08 0f 82 6b 01 00 00 48 89 7c 24 10 89 ea 48 8b 07 b9 00 02 RSP: 0018:ffffb8be4d0b7c28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000e8e8 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080 RBP: 0000000000012cc0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000dc0 R11: ffff995c60400100 R12: 0000000000000000 R13: 0000000000012cc0 R14: 0000000000000001 R15: ffff995c60db00f0 FS: 00007f4d115ca900(0000) GS:ffff995c60d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000002088 CR3: 00000017cca66002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: alloc_slab_page+0x46/0x320 new_slab+0x9d/0x4e0 ___slab_alloc+0x507/0x6a0 ? io_wq_create+0xb4/0x2a0 __slab_alloc+0x1c/0x30 kmem_cache_alloc_node_trace+0xa6/0x260 io_wq_create+0xb4/0x2a0 io_uring_setup+0x97f/0xaa0 ? io_remove_personalities+0x30/0x30 ? io_poll_trigger_evfd+0x30/0x30 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4d116cb1ed which is due to the 'wqe' and 'worker' allocation being node affine. But it isn't valid to call the node affine allocation if the node isn't online. Setup structures for even offline nodes, as usual, but skip them in terms of thread setup to not waste resources. If the node isn't online, just alloc memory with NUMA_NO_NODE. Reported-by: Glauber Costa <glauber@scylladb.com> Tested-by: Glauber Costa <glauber@scylladb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-11 13:30:06 +00:00
int alloc_node = node;
2019-10-22 16:25:58 +00:00
io-wq: don't call kXalloc_node() with non-online node Glauber reports a crash on init on a box he has: RIP: 0010:__alloc_pages_nodemask+0x132/0x340 Code: 18 01 75 04 41 80 ce 80 89 e8 48 8b 54 24 08 8b 74 24 1c c1 e8 0c 48 8b 3c 24 83 e0 01 88 44 24 20 48 85 d2 0f 85 74 01 00 00 <3b> 77 08 0f 82 6b 01 00 00 48 89 7c 24 10 89 ea 48 8b 07 b9 00 02 RSP: 0018:ffffb8be4d0b7c28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000e8e8 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080 RBP: 0000000000012cc0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000dc0 R11: ffff995c60400100 R12: 0000000000000000 R13: 0000000000012cc0 R14: 0000000000000001 R15: ffff995c60db00f0 FS: 00007f4d115ca900(0000) GS:ffff995c60d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000002088 CR3: 00000017cca66002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: alloc_slab_page+0x46/0x320 new_slab+0x9d/0x4e0 ___slab_alloc+0x507/0x6a0 ? io_wq_create+0xb4/0x2a0 __slab_alloc+0x1c/0x30 kmem_cache_alloc_node_trace+0xa6/0x260 io_wq_create+0xb4/0x2a0 io_uring_setup+0x97f/0xaa0 ? io_remove_personalities+0x30/0x30 ? io_poll_trigger_evfd+0x30/0x30 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4d116cb1ed which is due to the 'wqe' and 'worker' allocation being node affine. But it isn't valid to call the node affine allocation if the node isn't online. Setup structures for even offline nodes, as usual, but skip them in terms of thread setup to not waste resources. If the node isn't online, just alloc memory with NUMA_NO_NODE. Reported-by: Glauber Costa <glauber@scylladb.com> Tested-by: Glauber Costa <glauber@scylladb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-11 13:30:06 +00:00
if (!node_online(alloc_node))
alloc_node = NUMA_NO_NODE;
wqe = kzalloc_node(sizeof(struct io_wqe), GFP_KERNEL, alloc_node);
2019-10-22 16:25:58 +00:00
if (!wqe)
goto err;
wq->wqes[node] = wqe;
io-wq: don't call kXalloc_node() with non-online node Glauber reports a crash on init on a box he has: RIP: 0010:__alloc_pages_nodemask+0x132/0x340 Code: 18 01 75 04 41 80 ce 80 89 e8 48 8b 54 24 08 8b 74 24 1c c1 e8 0c 48 8b 3c 24 83 e0 01 88 44 24 20 48 85 d2 0f 85 74 01 00 00 <3b> 77 08 0f 82 6b 01 00 00 48 89 7c 24 10 89 ea 48 8b 07 b9 00 02 RSP: 0018:ffffb8be4d0b7c28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000e8e8 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000002080 RBP: 0000000000012cc0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000dc0 R11: ffff995c60400100 R12: 0000000000000000 R13: 0000000000012cc0 R14: 0000000000000001 R15: ffff995c60db00f0 FS: 00007f4d115ca900(0000) GS:ffff995c60d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000002088 CR3: 00000017cca66002 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: alloc_slab_page+0x46/0x320 new_slab+0x9d/0x4e0 ___slab_alloc+0x507/0x6a0 ? io_wq_create+0xb4/0x2a0 __slab_alloc+0x1c/0x30 kmem_cache_alloc_node_trace+0xa6/0x260 io_wq_create+0xb4/0x2a0 io_uring_setup+0x97f/0xaa0 ? io_remove_personalities+0x30/0x30 ? io_poll_trigger_evfd+0x30/0x30 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4d116cb1ed which is due to the 'wqe' and 'worker' allocation being node affine. But it isn't valid to call the node affine allocation if the node isn't online. Setup structures for even offline nodes, as usual, but skip them in terms of thread setup to not waste resources. If the node isn't online, just alloc memory with NUMA_NO_NODE. Reported-by: Glauber Costa <glauber@scylladb.com> Tested-by: Glauber Costa <glauber@scylladb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-11 13:30:06 +00:00
wqe->node = alloc_node;
wqe->acct[IO_WQ_ACCT_BOUND].index = IO_WQ_ACCT_BOUND;
wqe->acct[IO_WQ_ACCT_UNBOUND].index = IO_WQ_ACCT_UNBOUND;
wqe->acct[IO_WQ_ACCT_BOUND].max_workers = bounded;
atomic_set(&wqe->acct[IO_WQ_ACCT_BOUND].nr_running, 0);
wqe->acct[IO_WQ_ACCT_UNBOUND].max_workers =
task_rlimit(current, RLIMIT_NPROC);
atomic_set(&wqe->acct[IO_WQ_ACCT_UNBOUND].nr_running, 0);
wqe->wait.func = io_wqe_hash_wake;
INIT_LIST_HEAD(&wqe->wait.entry);
2019-10-22 16:25:58 +00:00
wqe->wq = wq;
io_wq: Make io_wqe::lock a raw_spinlock_t During a context switch the scheduler invokes wq_worker_sleeping() with disabled preemption. Disabling preemption is needed because it protects access to `worker->sleeping'. As an optimisation it avoids invoking schedule() within the schedule path as part of possible wake up (thus preempt_enable_no_resched() afterwards). The io-wq has been added to the mix in the same section with disabled preemption. This breaks on PREEMPT_RT because io_wq_worker_sleeping() acquires a spinlock_t. Also within the schedule() the spinlock_t must be acquired after tsk_is_pi_blocked() otherwise it will block on the sleeping lock again while scheduling out. While playing with `io_uring-bench' I didn't notice a significant latency spike after converting io_wqe::lock to a raw_spinlock_t. The latency was more or less the same. In order to keep the spinlock_t it would have to be moved after the tsk_is_pi_blocked() check which would introduce a branch instruction into the hot path. The lock is used to maintain the `work_list' and wakes one task up at most. Should io_wqe_cancel_pending_work() cause latency spikes, while searching for a specific item, then it would need to drop the lock during iterations. revert_creds() is also invoked under the lock. According to debug cred::non_rcu is 0. Otherwise it should be moved outside of the locked section because put_cred_rcu()->free_uid() acquires a sleeping lock. Convert io_wqe::lock to a raw_spinlock_t.c Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 08:41:46 +00:00
raw_spin_lock_init(&wqe->lock);
INIT_WQ_LIST(&wqe->work_list);
INIT_HLIST_NULLS_HEAD(&wqe->free_list, 0);
INIT_LIST_HEAD(&wqe->all_list);
2019-10-22 16:25:58 +00:00
}
wq->task = get_task_struct(data->task);
refcount_set(&wq->refs, 1);
atomic_set(&wq->worker_refs, 1);
init_completion(&wq->worker_done);
return wq;
err:
io_wq_put_hash(data->hash);
cpuhp_state_remove_instance_nocalls(io_wq_online, &wq->cpuhp_node);
for_each_node(node)
kfree(wq->wqes[node]);
err_wqes:
kfree(wq->wqes);
err_wq:
kfree(wq);
2019-10-22 16:25:58 +00:00
return ERR_PTR(ret);
}
static void io_wq_exit_workers(struct io_wq *wq)
{
struct callback_head *cb;
int node;
set_bit(IO_WQ_BIT_EXIT, &wq->state);
if (!wq->task)
return;
while ((cb = task_work_cancel(wq->task, create_worker_cb)) != NULL) {
struct create_worker_data *cwd;
cwd = container_of(cb, struct create_worker_data, work);
atomic_dec(&cwd->wqe->acct[cwd->index].nr_running);
io_worker_ref_put(wq);
kfree(cwd);
}
rcu_read_lock();
for_each_node(node) {
struct io_wqe *wqe = wq->wqes[node];
io_wq_for_each_worker(wqe, io_wq_worker_wake, NULL);
spin_lock_irq(&wq->hash->wait.lock);
list_del_init(&wq->wqes[node]->wait.entry);
spin_unlock_irq(&wq->hash->wait.lock);
}
rcu_read_unlock();
io_worker_ref_put(wq);
wait_for_completion(&wq->worker_done);
put_task_struct(wq->task);
wq->task = NULL;
}
static void io_wq_destroy(struct io_wq *wq)
2019-10-22 16:25:58 +00:00
{
int node;
2019-10-22 16:25:58 +00:00
cpuhp_state_remove_instance_nocalls(io_wq_online, &wq->cpuhp_node);
io_wq_exit_workers(wq);
2019-10-22 16:25:58 +00:00
for_each_node(node) {
struct io_wqe *wqe = wq->wqes[node];
io-wq: fix race around pending work on teardown syzbot reports that it's triggering the warning condition on having pending work on shutdown: WARNING: CPU: 1 PID: 12346 at fs/io-wq.c:1061 io_wq_destroy fs/io-wq.c:1061 [inline] WARNING: CPU: 1 PID: 12346 at fs/io-wq.c:1061 io_wq_put+0x153/0x260 fs/io-wq.c:1072 Modules linked in: CPU: 1 PID: 12346 Comm: syz-executor.5 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:io_wq_destroy fs/io-wq.c:1061 [inline] RIP: 0010:io_wq_put+0x153/0x260 fs/io-wq.c:1072 Code: 8d e8 71 90 ea 01 49 89 c4 41 83 fc 40 7d 4f e8 33 4d 97 ff 42 80 7c 2d 00 00 0f 85 77 ff ff ff e9 7a ff ff ff e8 1d 4d 97 ff <0f> 0b eb b9 8d 6b ff 89 ee 09 de bf ff ff ff ff e8 18 51 97 ff 09 RSP: 0018:ffffc90001ebfb08 EFLAGS: 00010293 RAX: ffffffff81e16083 RBX: ffff888019038040 RCX: ffff88801e86b780 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000040 RBP: 1ffff1100b2f8a80 R08: ffffffff81e15fce R09: ffffed100b2f8a82 R10: ffffed100b2f8a82 R11: 0000000000000000 R12: 0000000000000000 R13: dffffc0000000000 R14: ffff8880597c5400 R15: ffff888019038000 FS: 00007f8dcd89c700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e9a054e160 CR3: 000000001dfb8000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_uring_clean_tctx+0x1b7/0x210 fs/io_uring.c:8802 __io_uring_files_cancel+0x13c/0x170 fs/io_uring.c:8820 io_uring_files_cancel include/linux/io_uring.h:47 [inline] do_exit+0x258/0x2340 kernel/exit.c:780 do_group_exit+0x168/0x2d0 kernel/exit.c:922 get_signal+0x1734/0x1ef0 kernel/signal.c:2773 arch_do_signal_or_restart+0x3c/0x610 arch/x86/kernel/signal.c:811 handle_signal_work kernel/entry/common.c:147 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xac/0x1e0 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x48/0x180 kernel/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x465f69 which shouldn't happen, but seems to be possible due to a race on whether or not the io-wq manager sees a fatal signal first, or whether the io-wq workers do. If we race with queueing work and then send a fatal signal to the owning task, and the io-wq worker sees that before the manager sets IO_WQ_BIT_EXIT, then it's possible to have the worker exit and leave work behind. Just turn the WARN_ON_ONCE() into a cancelation condition instead. Reported-by: syzbot+77a738a6bc947bf639ca@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-25 16:16:12 +00:00
struct io_cb_cancel_data match = {
.fn = io_wq_work_match_all,
.cancel_all = true,
};
io_wqe_cancel_pending_work(wqe, &match);
kfree(wqe);
}
io_wq_put_hash(wq->hash);
2019-10-22 16:25:58 +00:00
kfree(wq->wqes);
kfree(wq);
}
void io_wq_put(struct io_wq *wq)
{
if (refcount_dec_and_test(&wq->refs))
io_wq_destroy(wq);
2019-10-22 16:25:58 +00:00
}
void io_wq_put_and_exit(struct io_wq *wq)
{
io_wq_exit_workers(wq);
io_wq_put(wq);
}
static bool io_wq_worker_affinity(struct io_worker *worker, void *data)
{
struct task_struct *task = worker->task;
struct rq_flags rf;
struct rq *rq;
rq = task_rq_lock(task, &rf);
do_set_cpus_allowed(task, cpumask_of_node(worker->wqe->node));
task->flags |= PF_NO_SETAFFINITY;
task_rq_unlock(rq, task, &rf);
return false;
}
static int io_wq_cpu_online(unsigned int cpu, struct hlist_node *node)
{
struct io_wq *wq = hlist_entry_safe(node, struct io_wq, cpuhp_node);
int i;
rcu_read_lock();
for_each_node(i)
io_wq_for_each_worker(wq->wqes[i], io_wq_worker_affinity, NULL);
rcu_read_unlock();
return 0;
}
static __init int io_wq_init(void)
{
int ret;
ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "io-wq/online",
io_wq_cpu_online, NULL);
if (ret < 0)
return ret;
io_wq_online = ret;
return 0;
}
subsys_initcall(io_wq_init);