linux/drivers/hwmon/max1111.c

291 lines
6.9 KiB
C
Raw Normal View History

/*
* max1111.c - +2.7V, Low-Power, Multichannel, Serial 8-bit ADCs
*
* Based on arch/arm/mach-pxa/corgi_ssp.c
*
* Copyright (C) 2004-2005 Richard Purdie
*
* Copyright (C) 2008 Marvell International Ltd.
* Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/spi/spi.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
enum chips { max1110, max1111, max1112, max1113 };
#define MAX1111_TX_BUF_SIZE 1
#define MAX1111_RX_BUF_SIZE 2
/* MAX1111 Commands */
#define MAX1111_CTRL_PD0 (1u << 0)
#define MAX1111_CTRL_PD1 (1u << 1)
#define MAX1111_CTRL_SGL (1u << 2)
#define MAX1111_CTRL_UNI (1u << 3)
#define MAX1110_CTRL_SEL_SH (4)
#define MAX1111_CTRL_SEL_SH (5) /* NOTE: bit 4 is ignored */
#define MAX1111_CTRL_STR (1u << 7)
struct max1111_data {
struct spi_device *spi;
struct device *hwmon_dev;
struct spi_message msg;
struct spi_transfer xfer[2];
uint8_t tx_buf[MAX1111_TX_BUF_SIZE];
uint8_t rx_buf[MAX1111_RX_BUF_SIZE];
struct mutex drvdata_lock;
/* protect msg, xfer and buffers from multiple access */
int sel_sh;
int lsb;
};
static int max1111_read(struct device *dev, int channel)
{
struct max1111_data *data = dev_get_drvdata(dev);
uint8_t v1, v2;
int err;
/* writing to drvdata struct is not thread safe, wait on mutex */
mutex_lock(&data->drvdata_lock);
data->tx_buf[0] = (channel << data->sel_sh) |
MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
err = spi_sync(data->spi, &data->msg);
if (err < 0) {
dev_err(dev, "spi_sync failed with %d\n", err);
mutex_unlock(&data->drvdata_lock);
return err;
}
v1 = data->rx_buf[0];
v2 = data->rx_buf[1];
mutex_unlock(&data->drvdata_lock);
if ((v1 & 0xc0) || (v2 & 0x3f))
return -EINVAL;
return (v1 << 2) | (v2 >> 6);
}
#ifdef CONFIG_SHARPSL_PM
static struct max1111_data *the_max1111;
int max1111_read_channel(int channel)
{
return max1111_read(&the_max1111->spi->dev, channel);
}
EXPORT_SYMBOL(max1111_read_channel);
#endif
/*
* NOTE: SPI devices do not have a default 'name' attribute, which is
* likely to be used by hwmon applications to distinguish between
* different devices, explicitly add a name attribute here.
*/
static ssize_t show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", to_spi_device(dev)->modalias);
}
static ssize_t show_adc(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct max1111_data *data = dev_get_drvdata(dev);
int channel = to_sensor_dev_attr(attr)->index;
int ret;
ret = max1111_read(dev, channel);
if (ret < 0)
return ret;
/*
* Assume the reference voltage to be 2.048V or 4.096V, with an 8-bit
* sample. The LSB weight is 8mV or 16mV depending on the chip type.
*/
return sprintf(buf, "%d\n", ret * data->lsb);
}
#define MAX1111_ADC_ATTR(_id) \
SENSOR_DEVICE_ATTR(in##_id##_input, S_IRUGO, show_adc, NULL, _id)
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static MAX1111_ADC_ATTR(0);
static MAX1111_ADC_ATTR(1);
static MAX1111_ADC_ATTR(2);
static MAX1111_ADC_ATTR(3);
static MAX1111_ADC_ATTR(4);
static MAX1111_ADC_ATTR(5);
static MAX1111_ADC_ATTR(6);
static MAX1111_ADC_ATTR(7);
static struct attribute *max1111_attributes[] = {
&dev_attr_name.attr,
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
NULL,
};
static const struct attribute_group max1111_attr_group = {
.attrs = max1111_attributes,
};
static struct attribute *max1110_attributes[] = {
&sensor_dev_attr_in4_input.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
&sensor_dev_attr_in7_input.dev_attr.attr,
NULL,
};
static const struct attribute_group max1110_attr_group = {
.attrs = max1110_attributes,
};
static int setup_transfer(struct max1111_data *data)
{
struct spi_message *m;
struct spi_transfer *x;
m = &data->msg;
x = &data->xfer[0];
spi_message_init(m);
x->tx_buf = &data->tx_buf[0];
x->len = MAX1111_TX_BUF_SIZE;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &data->rx_buf[0];
x->len = MAX1111_RX_BUF_SIZE;
spi_message_add_tail(x, m);
return 0;
}
static int max1111_probe(struct spi_device *spi)
{
enum chips chip = spi_get_device_id(spi)->driver_data;
struct max1111_data *data;
int err;
spi->bits_per_word = 8;
spi->mode = SPI_MODE_0;
err = spi_setup(spi);
if (err < 0)
return err;
data = devm_kzalloc(&spi->dev, sizeof(struct max1111_data), GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
switch (chip) {
case max1110:
data->lsb = 8;
data->sel_sh = MAX1110_CTRL_SEL_SH;
break;
case max1111:
data->lsb = 8;
data->sel_sh = MAX1111_CTRL_SEL_SH;
break;
case max1112:
data->lsb = 16;
data->sel_sh = MAX1110_CTRL_SEL_SH;
break;
case max1113:
data->lsb = 16;
data->sel_sh = MAX1111_CTRL_SEL_SH;
break;
}
err = setup_transfer(data);
if (err)
return err;
mutex_init(&data->drvdata_lock);
data->spi = spi;
spi_set_drvdata(spi, data);
err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
if (err) {
dev_err(&spi->dev, "failed to create attribute group\n");
return err;
}
if (chip == max1110 || chip == max1112) {
err = sysfs_create_group(&spi->dev.kobj, &max1110_attr_group);
if (err) {
dev_err(&spi->dev,
"failed to create extended attribute group\n");
goto err_remove;
}
}
data->hwmon_dev = hwmon_device_register(&spi->dev);
if (IS_ERR(data->hwmon_dev)) {
dev_err(&spi->dev, "failed to create hwmon device\n");
err = PTR_ERR(data->hwmon_dev);
goto err_remove;
}
#ifdef CONFIG_SHARPSL_PM
the_max1111 = data;
#endif
return 0;
err_remove:
sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group);
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
return err;
}
static int max1111_remove(struct spi_device *spi)
{
struct max1111_data *data = spi_get_drvdata(spi);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&spi->dev.kobj, &max1110_attr_group);
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
mutex_destroy(&data->drvdata_lock);
return 0;
}
static const struct spi_device_id max1111_ids[] = {
{ "max1110", max1110 },
{ "max1111", max1111 },
{ "max1112", max1112 },
{ "max1113", max1113 },
{ },
};
MODULE_DEVICE_TABLE(spi, max1111_ids);
static struct spi_driver max1111_driver = {
.driver = {
.name = "max1111",
},
.id_table = max1111_ids,
.probe = max1111_probe,
.remove = max1111_remove,
};
module_spi_driver(max1111_driver);
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
MODULE_DESCRIPTION("MAX1110/MAX1111/MAX1112/MAX1113 ADC Driver");
MODULE_LICENSE("GPL");